LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Emmeran Seehuber <rototor@rototor.de>
To: Tejun Heo <htejun@gmail.com>
Cc: linux-kernel@vger.kernel.org
Subject: Re: 2.6.18.2: sporadic SATA port resets (Broadcom BCM5785 (HT1000))
Date: Fri, 9 Feb 2007 12:37:24 +0100 [thread overview]
Message-ID: <200702091237.24576.rototor@rototor.de> (raw)
In-Reply-To: <45CC3C9C.3050101@gmail.com>
[-- Attachment #1: Type: text/plain, Size: 1003 bytes --]
Am Friday 09 February 2007 schrieb Tejun Heo:
> Hi,
>
> This is just the recovery part. Need more log. If possible, please
> give a shot at 2.6.20. It might have fixed your problem or at least
> allow better diagnosis.
>
I´ll look into getting 2.6.20 on the machine. But it might take some time till
we can do this.
> > Does somebody have a glue whats going on here? Could it be a hardware
> > failure?
>
> It might be. Quite some SATA bug reports turn out to be hardware
> problem, most commonly PSU issues.
The power supply unit (you meant this with PSU, didn`t you?) has 800 Watt, so
it should be powerfull enough for one harddisk and no graphics board.
> > Do you need additional information?
>
> Yeah, please post the content of /var/log/boot.msg if available and the
> result of dmesg and lspci -nn.
We don`t have a /var/log/boot.msg, but it seems the boot messages were saved
in /var/log/dmesg, so I attached it.
Thanks for your effort.
cu,
Emmy
[-- Attachment #2: lspci-nn.txt --]
[-- Type: text/plain, Size: 1945 bytes --]
00:01.0 PCI bridge [0604]: Broadcom HT1000 PCI/PCI-X bridge [1166:0036]
00:02.0 Host bridge [0600]: Broadcom HT1000 Legacy South Bridge [1166:0205]
00:02.1 IDE interface [0101]: Broadcom HT1000 Legacy IDE controller [1166:0214]
00:02.2 ISA bridge [0601]: Broadcom HT1000 LPC Bridge [1166:0234]
00:03.0 USB Controller [0c03]: Broadcom HT1000 USB Controller [1166:0223] (rev 01)
00:03.1 USB Controller [0c03]: Broadcom HT1000 USB Controller [1166:0223] (rev 01)
00:03.2 USB Controller [0c03]: Broadcom HT1000 USB Controller [1166:0223] (rev 01)
00:04.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05)
00:05.0 Ethernet controller [0200]: Intel Corporation 82541GI/PI Gigabit Ethernet Controller [8086:1076] (rev 05)
00:06.0 VGA compatible controller [0300]: XGI - Xabre Graphics Inc Volari Z7 [18ca:0020]
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
01:0d.0 PCI bridge [0604]: Broadcom HT1000 PCI/PCI-X bridge [1166:0104] (rev c0)
01:0e.0 RAID bus controller [0104]: Broadcom BCM5785 (HT1000) SATA Native SATA Mode [1166:024a]
[-- Attachment #3: dmesg.txt.gz --]
[-- Type: application/x-gzip, Size: 1191 bytes --]
[-- Attachment #4: boot.dmesg.txt.gz --]
[-- Type: application/x-gzip, Size: 7357 bytes --]
next prev parent reply other threads:[~2007-02-09 11:37 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-02-07 17:17 Emmeran Seehuber
2007-02-09 9:19 ` Tejun Heo
2007-02-09 11:37 ` Emmeran Seehuber [this message]
2007-02-09 13:54 ` Tejun Heo
2007-02-09 17:09 ` Emmeran Seehuber
2007-02-10 6:49 ` Tejun Heo
2007-02-10 8:42 ` Emmeran Seehuber
2007-02-11 22:19 ` Tejun Heo
2007-02-09 17:56 koan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200702091237.24576.rototor@rototor.de \
--to=rototor@rototor.de \
--cc=htejun@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--subject='Re: 2.6.18.2: sporadic SATA port resets (Broadcom BCM5785 (HT1000))' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).