LKML Archive on
help / color / mirror / Atom feed
From: Randy Dunlap <>
To: "Joseph Cosby" <>
Subject: Re: SATA Drive No Longer Recognized In New 2.6.20 Kernel
Date: Mon, 12 Feb 2007 16:33:37 -0800	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <BAY120-F15C225BC4817C7D84BC43E83900@phx.gbl>

On Mon, 12 Feb 2007 17:30:38 -0700 Joseph Cosby wrote:

> Hi,
> Until recently I was using the 2.6.18 kernel. I have a SATA hard drive
> that was detected by the kernel, using the PIIX driver. But after
> updating to 2.6.20, the hard drive is no longer detected by the kernel.
> I used make oldconfig to create the 2.6.20 config file, and I noticed a
> new option CONFIG_ATA. I did not use this, because as I understand it is
> not necessary and is experimental. Do I need to use this or is there
> something else in the new kernel that needs to be enabled for this
> driver?

Yes, you need CONFIG_ATA for SATA after 2.6.18.

(prod) == production level code, not experimental (that only
applies to the PATA drivers)

> My 2.6.20 config file follows.
> The hard drive has vendor ID 8086 and device ID 27c0. It is listed in the
> modules.pcilist file of 2.6.18 but not 2.6.20.
> If anybody can share any advice please CC me in response.
> #
> # Serial ATA (prod) and Parallel ATA (experimental) drivers
> #
> # CONFIG_ATA is not set

*** Remember to use Documentation/SubmitChecklist when testing your code ***

  reply	other threads:[~2007-02-13  0:38 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <>
2007-02-13  0:30 ` Joseph Cosby
2007-02-13  0:33   ` Randy Dunlap [this message]
     [not found] <>
     [not found] ` <fa.TnmEtAvuWo/>
2007-02-13  0:43   ` Robert Hancock
     [not found] <BAY120-F18A42FB31328FBBDDFC8B183900@phx.gbl>
2007-02-13  1:34 ` Randy Dunlap
2007-02-13 18:55   ` Joseph Cosby

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \
    --subject='Re: SATA Drive No Longer Recognized In New 2.6.20 Kernel' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).