LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Pavel Machek <pavel@ucw.cz>
To: Tejun Heo <htejun@gmail.com>
Cc: Robert Hancock <hancockr@shaw.ca>,
	linux-kernel <linux-kernel@vger.kernel.org>,
	linux-ide@vger.kernel.org
Subject: Re: pcim_enable_device BUGs for libata devices in 2.6.20-git6
Date: Mon, 12 Feb 2007 21:54:44 +0100	[thread overview]
Message-ID: <20070212205444.GC18101@elf.ucw.cz> (raw)
In-Reply-To: <45D02F5B.801@gmail.com>

Hi!

> >I'm seeing BUGs like these on all libata-driven controllers when 
> >suspending to disk on 2.6.20-git6:
> >
> >sata_nv 0000:00:07.0: resuming
> >BUG: at drivers/pci/pci.c:817 pcim_enable_device()
> >
> >Call Trace:
> > [<ffffffff80337d21>] pcim_enable_device+0x8a/0xa5
> > [<ffffffff88099d18>] :libata:ata_pci_device_do_resume+0x20/0x59
> > [<ffffffff880bb731>] :sata_nv:nv_pci_device_resume+0x1d/0x100
> > [<ffffffff8039d2bf>] resume_device+0xcb/0x12c
> > [<ffffffff8039d3ac>] dpm_resume+0x8c/0xec
> > [<ffffffff8039d456>] device_resume+0x4a/0x5d
> > [<ffffffff802a0a33>] pm_suspend_disk+0x160/0x170
> > [<ffffffff8029f4b6>] enter_state+0x52/0x1da
> > [<ffffffff8029f69c>] state_store+0x5e/0x79
> > [<ffffffff802f2b20>] sysfs_write_file+0xe4/0x118
> > [<ffffffff80214b58>] vfs_write+0xce/0x177
> > [<ffffffff8021553e>] sys_write+0x45/0x6e
> > [<ffffffff8025711e>] system_call+0x7e/0x83
> >
> >It looks like what's happening is that during the "freezing" stage, we 
> >suspend and then resume the controllers. ata_pci_device_do_suspend only 
> >calls pci_disable_device if the event is PM_EVENT_SUSPEND but 
> >ata_pci_device_do_resume calls pcim_enable_device unconditionally. If 
> >the event was something else, then pcim_enable_device complains because 
> >the device was previously enabled and never disabled.
> >
> >Not sure what the best way to fix this is?
> 
> I think what should happen is either one of the followings.
> 
> 1. Don't restore power state and re-enable PCI device on resume from 
> freeze just as we don't do the opposite when freezing.
> 
> 2. Unconditionally disable and power down PCI device on suspend whether 
> it's freeze or not.
> 
> #2 would be simpler but I'm a bit worried about it.  There might be 
> controllers which choke after such sequence (save state, disable, power 
> down, no actual power removal, power on, restore state, re-enable).

I'd just go for #2.

> #1 can be easily done by taking a look at the current device power state 
> (gendev->power.power_state).  The problem is that no one in 
> suspend/resume path seems to be setting that variable except for
> runtime 

No, that variable is probably going to go away. If you want to
remember that you are resuming from freeze, just store that info in
private data structure.
								Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

  reply	other threads:[~2007-02-12 20:55 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-02-12  0:44 Robert Hancock
2007-02-12  9:11 ` Tejun Heo
2007-02-12 20:54   ` Pavel Machek [this message]
2007-02-13 15:30     ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070212205444.GC18101@elf.ucw.cz \
    --to=pavel@ucw.cz \
    --cc=hancockr@shaw.ca \
    --cc=htejun@gmail.com \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: pcim_enable_device BUGs for libata devices in 2.6.20-git6' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).