2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Ash Milsted]

Hi,
With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
with one of the following on the command-line:
 - nolapic
 - irqfixup
 - pci=noacpi
Otherwise it gets stuck with the numlock on.
The following options have no effect:
 - nohz=off (who knows eh?)
 - pci=nomsi

Here is my lspci:
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0a.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
00:0b.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)

And here is a boot log without any of those parameters (keyboard fails):
Mar  3 14:38:24 joker syslog-ng[4183]: syslog-ng starting up; version='2.0.0' 
Mar  3 14:38:24 joker a0000 (reserved)
Mar  3 14:38:24 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:38:24 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:38:24 joker user-defined physical RAM map:
Mar  3 14:38:24 joker user: 0000000000000000 - 000000000009fc00 (usable)
Mar  3 14:38:24 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  3 14:38:24 joker user: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:38:24 joker user: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:38:24 joker 511MB LOWMEM available.
Mar  3 14:38:24 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Mar  3 14:38:24 joker Zone PFN ranges:
Mar  3 14:38:24 joker DMA             0 ->     4096
Mar  3 14:38:24 joker Normal       4096 ->   131056
Mar  3 14:38:24 joker early_node_map[1] active PFN ranges
Mar  3 14:38:24 joker 0:        0 ->   131056
Mar  3 14:38:24 joker On node 0 totalpages: 131056
Mar  3 14:38:24 joker DMA zone: 32 pages used for memmap
Mar  3 14:38:24 joker DMA zone: 0 pages reserved
Mar  3 14:38:24 joker DMA zone: 4064 pages, LIFO batch:0
Mar  3 14:38:24 joker Normal zone: 991 pages used for memmap
Mar  3 14:38:24 joker Normal zone: 125969 pages, LIFO batch:31
Mar  3 14:38:24 joker DMI 2.3 present.
Mar  3 14:38:24 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
Mar  3 14:38:24 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
Mar  3 14:38:24 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
Mar  3 14:38:24 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
Mar  3 14:38:24 joker ACPI: FACS 1FFF8000, 0040
Mar  3 14:38:24 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
Mar  3 14:38:24 joker ACPI: PM-Timer IO Port: 0x808
Mar  3 14:38:24 joker ACPI: Local APIC address 0xfee00000
Mar  3 14:38:24 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar  3 14:38:24 joker Processor #0 6:10 APIC version 16
Mar  3 14:38:24 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar  3 14:38:24 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Mar  3 14:38:24 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar  3 14:38:24 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar  3 14:38:24 joker ACPI: IRQ0 used by override.
Mar  3 14:38:24 joker ACPI: IRQ2 used by override.
Mar  3 14:38:24 joker ACPI: IRQ9 used by override.
Mar  3 14:38:24 joker Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar  3 14:38:24 joker Using ACPI (MADT) for SMP configuration information
Mar  3 14:38:24 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
Mar  3 14:38:24 joker Detected 2198.080 MHz processor.
Mar  3 14:38:24 joker Built 1 zonelists.  Total pages: 130033
Mar  3 14:38:24 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off mem=524224K
Mar  3 14:38:24 joker mapped APIC to ffffd000 (fee00000)
Mar  3 14:38:24 joker mapped IOAPIC to ffffc000 (fec00000)
Mar  3 14:38:24 joker Enabling fast FPU save and restore... done.
Mar  3 14:38:24 joker Enabling unmasked SIMD FPU exception support... done.
Mar  3 14:38:24 joker Initializing CPU#0
Mar  3 14:38:24 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000
Mar  3 14:38:24 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar  3 14:38:24 joker Console: colour VGA+ 80x50
Mar  3 14:38:24 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar  3 14:38:24 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar  3 14:38:24 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem)
Mar  3 14:38:24 joker virtual kernel memory layout:
Mar  3 14:38:24 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
Mar  3 14:38:24 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
Mar  3 14:38:24 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
Mar  3 14:38:24 joker .init : 0xc02d1000 - 0xc0300000   ( 188 kB)
Mar  3 14:38:24 joker .data : 0xc024a4cd - 0xc02cf9b4   ( 533 kB)
Mar  3 14:38:24 joker .text : 0xc0100000 - 0xc024a4cd   (1321 kB)
Mar  3 14:38:24 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar  3 14:38:24 joker Calibrating delay using timer specific routine.. 4405.92 BogoMIPS (lpj=2546149)
Mar  3 14:38:24 joker Mount-cache hash table entries: 512
Mar  3 14:38:24 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar  3 14:38:24 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  3 14:38:24 joker CPU: L2 Cache: 512K (64 bytes/line)
Mar  3 14:38:24 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Mar  3 14:38:24 joker Intel machine check architecture supported.
Mar  3 14:38:24 joker Intel machine check reporting enabled on CPU#0.
Mar  3 14:38:24 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
Mar  3 14:38:24 joker Checking 'hlt' instruction... OK.
Mar  3 14:38:24 joker ACPI: Core revision 20070126
Mar  3 14:38:24 joker ENABLING IO-APIC IRQs
Mar  3 14:38:24 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar  3 14:38:24 joker NET: Registered protocol family 16
Mar  3 14:38:24 joker ACPI: bus type pci registered
Mar  3 14:38:24 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
Mar  3 14:38:24 joker PCI: Using configuration type 1
Mar  3 14:38:24 joker Setting up standard PCI resources
Mar  3 14:38:24 joker ACPI: Interpreter enabled
Mar  3 14:38:24 joker ACPI: (supports S0 S1 S3 S4 S5)
Mar  3 14:38:24 joker ACPI: Using IOAPIC for interrupt routing
Mar  3 14:38:24 joker ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  3 14:38:24 joker PCI: Probing PCI hardware (bus 00)
Mar  3 14:38:24 joker Boot video device is 0000:01:00.0
Mar  3 14:38:24 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:38:24 joker ACPI: Power Resource [URP1] (off)
Mar  3 14:38:24 joker ACPI: Power Resource [URP2] (off)
Mar  3 14:38:24 joker ACPI: Power Resource [FDDP] (off)
Mar  3 14:38:24 joker ACPI: Power Resource [LPTP] (off)
Mar  3 14:38:24 joker Linux Plug and Play Support v0.97 (c) Adam Belay
Mar  3 14:38:24 joker pnp: PnP ACPI init
Mar  3 14:38:24 joker pnp: PnP ACPI: found 11 devices
Mar  3 14:38:24 joker PCI: Using ACPI for IRQ routing
Mar  3 14:38:24 joker PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar  3 14:38:24 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
Mar  3 14:38:24 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
Mar  3 14:38:24 joker PCI: Bridge: 0000:00:01.0
Mar  3 14:38:24 joker IO window: disabled.
Mar  3 14:38:24 joker MEM window: dde00000-dfefffff
Mar  3 14:38:24 joker PREFETCH window: cdd00000-ddcfffff
Mar  3 14:38:24 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
Mar  3 14:38:24 joker NET: Registered protocol family 2
Mar  3 14:38:24 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar  3 14:38:24 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar  3 14:38:24 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar  3 14:38:24 joker TCP: Hash tables configured (established 16384 bind 16384)
Mar  3 14:38:24 joker TCP reno registered
Mar  3 14:38:24 joker checking if image is initramfs... it is
Mar  3 14:38:24 joker Freeing initrd memory: 864k freed
Mar  3 14:38:24 joker Machine check exception polling timer started.
Mar  3 14:38:24 joker VFS: Disk quotas dquot_6.5.1
Mar  3 14:38:24 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar  3 14:38:24 joker io scheduler noop registered
Mar  3 14:38:24 joker io scheduler anticipatory registered
Mar  3 14:38:24 joker io scheduler deadline registered
Mar  3 14:38:24 joker io scheduler cfq registered (default)
Mar  3 14:38:24 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
Mar  3 14:38:24 joker input: Power Button (FF) as /class/input/input0
Mar  3 14:38:24 joker ACPI: Power Button (FF) [PWRF]
Mar  3 14:38:24 joker input: Power Button (CM) as /class/input/input1
Mar  3 14:38:24 joker ACPI: Power Button (CM) [PWRB]
Mar  3 14:38:24 joker input: Sleep Button (CM) as /class/input/input2
Mar  3 14:38:24 joker ACPI: Sleep Button (CM) [SLPB]
Mar  3 14:38:24 joker isapnp: Scanning for PnP cards...
Mar  3 14:38:24 joker isapnp: No Plug & Play device found
Mar  3 14:38:24 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  3 14:38:24 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  3 14:38:24 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  3 14:38:24 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar  3 14:38:24 joker loop: loaded (max 8 devices)
Mar  3 14:38:24 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar  3 14:38:24 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
Mar  3 14:38:24 joker serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  3 14:38:24 joker serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  3 14:38:24 joker mice: PS/2 mouse device common for all mice
Mar  3 14:38:24 joker TCP cubic registered
Mar  3 14:38:24 joker NET: Registered protocol family 1
Mar  3 14:38:24 joker NET: Registered protocol family 17
Mar  3 14:38:24 joker Using IPI Shortcut mode
Mar  3 14:38:24 joker Time: tsc clocksource has been installed.
Mar  3 14:38:24 joker Freeing unused kernel memory: 188k freed
Mar  3 14:38:24 joker SCSI subsystem initialized
Mar  3 14:38:24 joker libata version 2.20 loaded.
Mar  3 14:38:24 joker pata_via 0000:00:0f.1: version 0.2.1
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
Mar  3 14:38:24 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
Mar  3 14:38:24 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
Mar  3 14:38:24 joker scsi0 : pata_via
Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
Mar  3 14:38:24 joker ata1.00: 160086528 sectors, multi 16: LBA 
Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ata1.00: configured for UDMA/133
Mar  3 14:38:24 joker scsi1 : pata_via
Mar  3 14:38:24 joker Switched to high resolution mode on CPU 0
Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ata2.00: ATAPI, max UDMA/33
Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ata2.01: ATAPI, max UDMA/33
Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ata2.00: configured for UDMA/33
Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:38:24 joker ata2.01: configured for UDMA/33
Mar  3 14:38:24 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Mar  3 14:38:24 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
Mar  3 14:38:24 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
Mar  3 14:38:24 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  3 14:38:24 joker sda: Write Protect is off
Mar  3 14:38:24 joker sda: Mode Sense: 00 3a 00 00
Mar  3 14:38:24 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  3 14:38:24 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  3 14:38:24 joker sda: Write Protect is off
Mar  3 14:38:24 joker sda: Mode Sense: 00 3a 00 00
Mar  3 14:38:24 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  3 14:38:24 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Mar  3 14:38:24 joker sd 0:0:0:0: Attached scsi disk sda
Mar  3 14:38:24 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Mar  3 14:38:24 joker Uniform CD-ROM driver Revision: 3.20
Mar  3 14:38:24 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar  3 14:38:24 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Mar  3 14:38:24 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
Mar  3 14:38:24 joker kjournald starting.  Commit interval 5 seconds
Mar  3 14:38:24 joker EXT3-fs: mounted filesystem with ordered data mode.
Mar  3 14:38:24 joker usbcore: registered new interface driver usbfs
Mar  3 14:38:24 joker usbcore: registered new interface driver hub
Mar  3 14:38:24 joker usbcore: registered new device driver usb
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
Mar  3 14:38:24 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
Mar  3 14:38:24 joker Real Time Clock Driver v1.12ac
Mar  3 14:38:24 joker i2c /dev entries driver
Mar  3 14:38:24 joker fuse init (API version 7.8)
Mar  3 14:38:24 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar  3 14:38:24 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar  3 14:38:24 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
Mar  3 14:38:24 joker input: PC Speaker as /class/input/input3
Mar  3 14:38:24 joker PPP generic driver version 2.4.2
Mar  3 14:38:24 joker ieee1394: Initialized config rom entry `ip1394'
Mar  3 14:38:24 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
Mar  3 14:38:24 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 19
Mar  3 14:38:24 joker USB Universal Host Controller Interface driver v3.0
Mar  3 14:38:24 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000
Mar  3 14:38:24 joker usb usb1: configuration #1 chosen from 1 choice
Mar  3 14:38:24 joker hub 1-0:1.0: USB hub found
Mar  3 14:38:24 joker hub 1-0:1.0: 2 ports detected
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c400
Mar  3 14:38:24 joker usb usb2: configuration #1 chosen from 1 choice
Mar  3 14:38:24 joker hub 2-0:1.0: USB hub found
Mar  3 14:38:24 joker hub 2-0:1.0: 2 ports detected
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c800
Mar  3 14:38:24 joker usb usb3: configuration #1 chosen from 1 choice
Mar  3 14:38:24 joker hub 3-0:1.0: USB hub found
Mar  3 14:38:24 joker hub 3-0:1.0: 2 ports detected
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Mar  3 14:38:24 joker uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00
Mar  3 14:38:24 joker usb usb4: configuration #1 chosen from 1 choice
Mar  3 14:38:24 joker hub 4-0:1.0: USB hub found
Mar  3 14:38:24 joker hub 4-0:1.0: 2 ports detected
Mar  3 14:38:24 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: irq 20, io mem 0xdfff9600
Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  3 14:38:24 joker usb usb5: configuration #1 chosen from 1 choice
Mar  3 14:38:24 joker hub 5-0:1.0: USB hub found
Mar  3 14:38:24 joker hub 5-0:1.0: 8 ports detected
Mar  3 14:38:24 joker usb 2-1: unable to read config index 0 descriptor/start
Mar  3 14:38:24 joker usb 2-1: chopping to 0 config(s)
Mar  3 14:38:24 joker usb 2-1: no configuration chosen from 0 choices
Mar  3 14:38:24 joker parport: PnPBIOS parport detected.
Mar  3 14:38:24 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar  3 14:38:24 joker sata_via 0000:00:0f.0: version 2.1
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
Mar  3 14:38:24 joker sata_via 0000:00:0f.0: routed to hard irq line 10
Mar  3 14:38:24 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16
Mar  3 14:38:24 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16
Mar  3 14:38:24 joker scsi2 : sata_via
Mar  3 14:38:24 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Mar  3 14:38:24 joker pnp: Device 00:07 does not support disabling.
Mar  3 14:38:24 joker rtc_cmos: probe of 00:07 failed with error -16
Mar  3 14:38:24 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  3 14:38:24 joker ATA: abnormal status 0x7F on port 0x0001e807
Mar  3 14:38:24 joker scsi3 : sata_via
Mar  3 14:38:24 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
Mar  3 14:38:24 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  3 14:38:24 joker ATA: abnormal status 0x7F on port 0x0001e007
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
Mar  3 14:38:24 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
Mar  3 14:38:24 joker usb 2-1: USB disconnect, address 2
Mar  3 14:38:24 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
Mar  3 14:38:24 joker lp0: using parport0 (interrupt-driven).
Mar  3 14:38:24 joker ppdev: user-space parallel port driver
Mar  3 14:38:24 joker usb 2-1: new low speed USB device using uhci_hcd and address 3
Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22
Mar  3 14:38:24 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 22.
Mar  3 14:38:24 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Mar  3 14:38:24 joker usb 2-1: configuration #1 chosen from 1 choice
Mar  3 14:38:24 joker usbcore: registered new interface driver hiddev
Mar  3 14:38:24 joker input: HID 1241:1177 as /class/input/input4
Mar  3 14:38:24 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
Mar  3 14:38:24 joker usbcore: registered new interface driver usbhid
Mar  3 14:38:24 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  3 14:38:24 joker EXT3 FS on sda2, internal journal
Mar  3 14:38:24 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
Mar  3 14:38:24 joker init: Going single user

An here's one with irqfixup (after a cold boot - doesn't always work after a warm boot) (keyboard works):
Mar  3 14:41:52 joker syslog-ng[4191]: syslog-ng starting up; version='2.0.0' 
Mar  3 14:41:52 joker 000 (usable)
Mar  3 14:41:52 joker user-defined physical RAM map:
Mar  3 14:41:52 joker user: 0000000000000000 - 000000000009fc00 (usable)
Mar  3 14:41:52 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  3 14:41:52 joker user: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:41:52 joker user: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:41:52 joker 511MB LOWMEM available.
Mar  3 14:41:52 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Mar  3 14:41:52 joker Zone PFN ranges:
Mar  3 14:41:52 joker DMA             0 ->     4096
Mar  3 14:41:52 joker Normal       4096 ->   131056
Mar  3 14:41:52 joker early_node_map[1] active PFN ranges
Mar  3 14:41:52 joker 0:        0 ->   131056
Mar  3 14:41:52 joker On node 0 totalpages: 131056
Mar  3 14:41:52 joker DMA zone: 32 pages used for memmap
Mar  3 14:41:52 joker DMA zone: 0 pages reserved
Mar  3 14:41:52 joker DMA zone: 4064 pages, LIFO batch:0
Mar  3 14:41:52 joker Normal zone: 991 pages used for memmap
Mar  3 14:41:52 joker Normal zone: 125969 pages, LIFO batch:31
Mar  3 14:41:52 joker DMI 2.3 present.
Mar  3 14:41:52 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
Mar  3 14:41:52 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
Mar  3 14:41:52 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
Mar  3 14:41:52 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
Mar  3 14:41:52 joker ACPI: FACS 1FFF8000, 0040
Mar  3 14:41:52 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
Mar  3 14:41:52 joker ACPI: PM-Timer IO Port: 0x808
Mar  3 14:41:52 joker ACPI: Local APIC address 0xfee00000
Mar  3 14:41:52 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar  3 14:41:52 joker Processor #0 6:10 APIC version 16
Mar  3 14:41:52 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar  3 14:41:52 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Mar  3 14:41:52 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar  3 14:41:52 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar  3 14:41:52 joker ACPI: IRQ0 used by override.
Mar  3 14:41:52 joker ACPI: IRQ2 used by override.
Mar  3 14:41:52 joker ACPI: IRQ9 used by override.
Mar  3 14:41:52 joker Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar  3 14:41:52 joker Using ACPI (MADT) for SMP configuration information
Mar  3 14:41:52 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
Mar  3 14:41:52 joker Detected 2198.080 MHz processor.
Mar  3 14:41:52 joker Built 1 zonelists.  Total pages: 130033
Mar  3 14:41:52 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off irqfixup mem=524224K
Mar  3 14:41:52 joker Misrouted IRQ fixup support enabled.
Mar  3 14:41:52 joker This may impact system performance.
Mar  3 14:41:52 joker mapped APIC to ffffd000 (fee00000)
Mar  3 14:41:52 joker mapped IOAPIC to ffffc000 (fec00000)
Mar  3 14:41:52 joker Enabling fast FPU save and restore... done.
Mar  3 14:41:52 joker Enabling unmasked SIMD FPU exception support... done.
Mar  3 14:41:52 joker Initializing CPU#0
Mar  3 14:41:52 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000
Mar  3 14:41:52 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar  3 14:41:52 joker Console: colour VGA+ 80x50
Mar  3 14:41:52 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar  3 14:41:52 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar  3 14:41:52 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem)
Mar  3 14:41:52 joker virtual kernel memory layout:
Mar  3 14:41:52 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
Mar  3 14:41:52 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
Mar  3 14:41:52 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
Mar  3 14:41:52 joker .init : 0xc02d1000 - 0xc0300000   ( 188 kB)
Mar  3 14:41:52 joker .data : 0xc024a4cd - 0xc02cf9b4   ( 533 kB)
Mar  3 14:41:52 joker .text : 0xc0100000 - 0xc024a4cd   (1321 kB)
Mar  3 14:41:52 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar  3 14:41:52 joker Calibrating delay using timer specific routine.. 4405.92 BogoMIPS (lpj=2546145)
Mar  3 14:41:52 joker Mount-cache hash table entries: 512
Mar  3 14:41:52 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar  3 14:41:52 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  3 14:41:52 joker CPU: L2 Cache: 512K (64 bytes/line)
Mar  3 14:41:52 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Mar  3 14:41:52 joker Intel machine check architecture supported.
Mar  3 14:41:52 joker Intel machine check reporting enabled on CPU#0.
Mar  3 14:41:52 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
Mar  3 14:41:52 joker Checking 'hlt' instruction... OK.
Mar  3 14:41:52 joker ACPI: Core revision 20070126
Mar  3 14:41:52 joker ENABLING IO-APIC IRQs
Mar  3 14:41:52 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar  3 14:41:52 joker NET: Registered protocol family 16
Mar  3 14:41:52 joker ACPI: bus type pci registered
Mar  3 14:41:52 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
Mar  3 14:41:52 joker PCI: Using configuration type 1
Mar  3 14:41:52 joker Setting up standard PCI resources
Mar  3 14:41:52 joker ACPI: Interpreter enabled
Mar  3 14:41:52 joker ACPI: (supports S0 S1 S3 S4 S5)
Mar  3 14:41:52 joker ACPI: Using IOAPIC for interrupt routing
Mar  3 14:41:52 joker ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  3 14:41:52 joker PCI: Probing PCI hardware (bus 00)
Mar  3 14:41:52 joker Boot video device is 0000:01:00.0
Mar  3 14:41:52 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  3 14:41:52 joker ACPI: Power Resource [URP1] (off)
Mar  3 14:41:52 joker ACPI: Power Resource [URP2] (off)
Mar  3 14:41:52 joker ACPI: Power Resource [FDDP] (off)
Mar  3 14:41:52 joker ACPI: Power Resource [LPTP] (off)
Mar  3 14:41:52 joker Linux Plug and Play Support v0.97 (c) Adam Belay
Mar  3 14:41:52 joker pnp: PnP ACPI init
Mar  3 14:41:52 joker pnp: PnP ACPI: found 11 devices
Mar  3 14:41:52 joker PCI: Using ACPI for IRQ routing
Mar  3 14:41:52 joker PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar  3 14:41:52 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
Mar  3 14:41:52 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
Mar  3 14:41:52 joker PCI: Bridge: 0000:00:01.0
Mar  3 14:41:52 joker IO window: disabled.
Mar  3 14:41:52 joker MEM window: dde00000-dfefffff
Mar  3 14:41:52 joker PREFETCH window: cdd00000-ddcfffff
Mar  3 14:41:52 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
Mar  3 14:41:52 joker NET: Registered protocol family 2
Mar  3 14:41:52 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar  3 14:41:52 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar  3 14:41:52 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar  3 14:41:52 joker TCP: Hash tables configured (established 16384 bind 16384)
Mar  3 14:41:52 joker TCP reno registered
Mar  3 14:41:52 joker checking if image is initramfs... it is
Mar  3 14:41:52 joker Freeing initrd memory: 864k freed
Mar  3 14:41:52 joker Machine check exception polling timer started.
Mar  3 14:41:52 joker VFS: Disk quotas dquot_6.5.1
Mar  3 14:41:52 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar  3 14:41:52 joker io scheduler noop registered
Mar  3 14:41:52 joker io scheduler anticipatory registered
Mar  3 14:41:52 joker io scheduler deadline registered
Mar  3 14:41:52 joker io scheduler cfq registered (default)
Mar  3 14:41:52 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
Mar  3 14:41:52 joker input: Power Button (FF) as /class/input/input0
Mar  3 14:41:52 joker ACPI: Power Button (FF) [PWRF]
Mar  3 14:41:52 joker input: Power Button (CM) as /class/input/input1
Mar  3 14:41:52 joker ACPI: Power Button (CM) [PWRB]
Mar  3 14:41:52 joker input: Sleep Button (CM) as /class/input/input2
Mar  3 14:41:52 joker ACPI: Sleep Button (CM) [SLPB]
Mar  3 14:41:52 joker isapnp: Scanning for PnP cards...
Mar  3 14:41:52 joker isapnp: No Plug & Play device found
Mar  3 14:41:52 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  3 14:41:52 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  3 14:41:52 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  3 14:41:52 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar  3 14:41:52 joker loop: loaded (max 8 devices)
Mar  3 14:41:52 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar  3 14:41:52 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
Mar  3 14:41:52 joker serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  3 14:41:52 joker serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  3 14:41:52 joker mice: PS/2 mouse device common for all mice
Mar  3 14:41:52 joker TCP cubic registered
Mar  3 14:41:52 joker NET: Registered protocol family 1
Mar  3 14:41:52 joker NET: Registered protocol family 17
Mar  3 14:41:52 joker Using IPI Shortcut mode
Mar  3 14:41:52 joker Time: tsc clocksource has been installed.
Mar  3 14:41:52 joker Freeing unused kernel memory: 188k freed
Mar  3 14:41:52 joker SCSI subsystem initialized
Mar  3 14:41:52 joker libata version 2.20 loaded.
Mar  3 14:41:52 joker pata_via 0000:00:0f.1: version 0.2.1
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
Mar  3 14:41:52 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
Mar  3 14:41:52 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
Mar  3 14:41:52 joker scsi0 : pata_via
Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
Mar  3 14:41:52 joker ata1.00: 160086528 sectors, multi 16: LBA 
Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ata1.00: configured for UDMA/133
Mar  3 14:41:52 joker scsi1 : pata_via
Mar  3 14:41:52 joker Switched to high resolution mode on CPU 0
Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ata2.00: ATAPI, max UDMA/33
Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ata2.01: ATAPI, max UDMA/33
Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ata2.00: configured for UDMA/33
Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
Mar  3 14:41:52 joker ata2.01: configured for UDMA/33
Mar  3 14:41:52 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Mar  3 14:41:52 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
Mar  3 14:41:52 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
Mar  3 14:41:52 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  3 14:41:52 joker sda: Write Protect is off
Mar  3 14:41:52 joker sda: Mode Sense: 00 3a 00 00
Mar  3 14:41:52 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  3 14:41:52 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  3 14:41:52 joker sda: Write Protect is off
Mar  3 14:41:52 joker sda: Mode Sense: 00 3a 00 00
Mar  3 14:41:52 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  3 14:41:52 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Mar  3 14:41:52 joker sd 0:0:0:0: Attached scsi disk sda
Mar  3 14:41:52 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Mar  3 14:41:52 joker Uniform CD-ROM driver Revision: 3.20
Mar  3 14:41:52 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar  3 14:41:52 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Mar  3 14:41:52 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
Mar  3 14:41:52 joker input: AT Translated Set 2 keyboard as /class/input/input3
Mar  3 14:41:52 joker EXT3-fs: INFO: recovery required on readonly filesystem.
Mar  3 14:41:52 joker EXT3-fs: write access will be enabled during recovery.
Mar  3 14:41:52 joker kjournald starting.  Commit interval 5 seconds
Mar  3 14:41:52 joker EXT3-fs: recovery complete.
Mar  3 14:41:52 joker EXT3-fs: mounted filesystem with ordered data mode.
Mar  3 14:41:52 joker usbcore: registered new interface driver usbfs
Mar  3 14:41:52 joker usbcore: registered new interface driver hub
Mar  3 14:41:52 joker usbcore: registered new device driver usb
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
Mar  3 14:41:52 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
Mar  3 14:41:52 joker Real Time Clock Driver v1.12ac
Mar  3 14:41:52 joker i2c /dev entries driver
Mar  3 14:41:52 joker fuse init (API version 7.8)
Mar  3 14:41:52 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar  3 14:41:52 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar  3 14:41:52 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
Mar  3 14:41:52 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
Mar  3 14:41:52 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
Mar  3 14:41:52 joker ieee1394: Initialized config rom entry `ip1394'
Mar  3 14:41:52 joker PPP generic driver version 2.4.2
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 19
Mar  3 14:41:52 joker parport: PnPBIOS parport detected.
Mar  3 14:41:52 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar  3 14:41:52 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Mar  3 14:41:52 joker pnp: Device 00:07 does not support disabling.
Mar  3 14:41:52 joker rtc_cmos: probe of 00:07 failed with error -16
Mar  3 14:41:52 joker input: PC Speaker as /class/input/input4
Mar  3 14:41:52 joker USB Universal Host Controller Interface driver v3.0
Mar  3 14:41:52 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Mar  3 14:41:52 joker sata_via 0000:00:0f.0: version 2.1
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
Mar  3 14:41:52 joker sata_via 0000:00:0f.0: routed to hard irq line 10
Mar  3 14:41:52 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16
Mar  3 14:41:52 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16
Mar  3 14:41:52 joker scsi2 : sata_via
Mar  3 14:41:52 joker lp0: using parport0 (interrupt-driven).
Mar  3 14:41:52 joker ppdev: user-space parallel port driver
Mar  3 14:41:52 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  3 14:41:52 joker ATA: abnormal status 0x7F on port 0x0001e807
Mar  3 14:41:52 joker scsi3 : sata_via
Mar  3 14:41:52 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  3 14:41:52 joker ATA: abnormal status 0x7F on port 0x0001e007
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000
Mar  3 14:41:52 joker usb usb1: configuration #1 chosen from 1 choice
Mar  3 14:41:52 joker hub 1-0:1.0: USB hub found
Mar  3 14:41:52 joker hub 1-0:1.0: 2 ports detected
Mar  3 14:41:52 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
Mar  3 14:41:52 joker atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c400
Mar  3 14:41:52 joker usb usb2: configuration #1 chosen from 1 choice
Mar  3 14:41:52 joker hub 2-0:1.0: USB hub found
Mar  3 14:41:52 joker hub 2-0:1.0: 2 ports detected
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c800
Mar  3 14:41:52 joker usb usb3: configuration #1 chosen from 1 choice
Mar  3 14:41:52 joker hub 3-0:1.0: USB hub found
Mar  3 14:41:52 joker hub 3-0:1.0: 2 ports detected
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Mar  3 14:41:52 joker uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00
Mar  3 14:41:52 joker usb usb4: configuration #1 chosen from 1 choice
Mar  3 14:41:52 joker hub 4-0:1.0: USB hub found
Mar  3 14:41:52 joker hub 4-0:1.0: 2 ports detected
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20
Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: irq 20, io mem 0xdfff9600
Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  3 14:41:52 joker usb usb5: configuration #1 chosen from 1 choice
Mar  3 14:41:52 joker hub 5-0:1.0: USB hub found
Mar  3 14:41:52 joker hub 5-0:1.0: 8 ports detected
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
Mar  3 14:41:52 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
Mar  3 14:41:52 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22
Mar  3 14:41:52 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 22.
Mar  3 14:41:52 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Mar  3 14:41:52 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
Mar  3 14:41:52 joker EXT3 FS on sda2, internal journal
Mar  3 14:41:52 joker usb 2-1: configuration #1 chosen from 1 choice
Mar  3 14:41:52 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
Mar  3 14:41:52 joker usbcore: registered new interface driver hiddev
Mar  3 14:41:52 joker input: HID 1241:1177 as /class/input/input5
Mar  3 14:41:52 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
Mar  3 14:41:52 joker usbcore: registered new interface driver usbhid
Mar  3 14:41:52 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  3 14:41:52 joker init: Going single user
Mar  3 14:42:25 joker shutdown[4197]: shutting down for system reboot
Mar  3 14:42:25 joker init: Switching to runlevel: 6
Mar  3 14:42:26 joker syslog-ng[4191]: SIGTERM received, terminating;  
Mar  3 14:42:26 joker syslog-ng[4191]: syslog-ng shutting down; version='2.0.0' 

And here's one with pci=noacpi (keyboard works):
Mar  3 14:43:13 joker syslog-ng[4211]: syslog-ng starting up; version='2.0.0' 
Mar  3 14:43:13 joker fef0000 end: 000000001fff0000 type: 1
Mar  3 14:43:13 joker copy_e820_map() type is E820_RAM
Mar  3 14:43:13 joker copy_e820_map() start: 000000001fff0000 size: 0000000000008000 end: 000000001fff8000 type: 3
Mar  3 14:43:13 joker copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4
Mar  3 14:43:13 joker copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
Mar  3 14:43:13 joker copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
Mar  3 14:43:13 joker copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
Mar  3 14:43:13 joker BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar  3 14:43:13 joker BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  3 14:43:13 joker BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:43:13 joker BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:43:13 joker BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar  3 14:43:13 joker BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar  3 14:43:13 joker BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar  3 14:43:13 joker BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar  3 14:43:13 joker BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Mar  3 14:43:13 joker limit_regions start: 0000000000000000 - 000000000009fc00 (usable)
Mar  3 14:43:13 joker limit_regions start: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  3 14:43:13 joker limit_regions start: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:43:13 joker limit_regions start: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:43:13 joker limit_regions start: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar  3 14:43:13 joker limit_regions start: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar  3 14:43:13 joker limit_regions start: 00000000fec00000 - 00000000fec01000 (reserved)
Mar  3 14:43:13 joker limit_regions start: 00000000fee00000 - 00000000fee01000 (reserved)
Mar  3 14:43:13 joker limit_regions start: 00000000fff80000 - 0000000100000000 (reserved)
Mar  3 14:43:13 joker limit_regions endfor: 0000000000000000 - 000000000009fc00 (usable)
Mar  3 14:43:13 joker limit_regions endfor: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  3 14:43:13 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:43:13 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:43:13 joker user-defined physical RAM map:
Mar  3 14:43:13 joker user: 0000000000000000 - 000000000009fc00 (usable)
Mar  3 14:43:13 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  3 14:43:13 joker user: 00000000000f0000 - 0000000000100000 (reserved)
Mar  3 14:43:13 joker user: 0000000000100000 - 000000001fff0000 (usable)
Mar  3 14:43:13 joker 511MB LOWMEM available.
Mar  3 14:43:13 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Mar  3 14:43:13 joker Zone PFN ranges:
Mar  3 14:43:13 joker DMA             0 ->     4096
Mar  3 14:43:13 joker Normal       4096 ->   131056
Mar  3 14:43:13 joker early_node_map[1] active PFN ranges
Mar  3 14:43:13 joker 0:        0 ->   131056
Mar  3 14:43:13 joker On node 0 totalpages: 131056
Mar  3 14:43:13 joker DMA zone: 32 pages used for memmap
Mar  3 14:43:13 joker DMA zone: 0 pages reserved
Mar  3 14:43:13 joker DMA zone: 4064 pages, LIFO batch:0
Mar  3 14:43:13 joker Normal zone: 991 pages used for memmap
Mar  3 14:43:13 joker Normal zone: 125969 pages, LIFO batch:31
Mar  3 14:43:13 joker DMI 2.3 present.
Mar  3 14:43:13 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
Mar  3 14:43:13 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
Mar  3 14:43:13 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
Mar  3 14:43:13 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
Mar  3 14:43:13 joker ACPI: FACS 1FFF8000, 0040
Mar  3 14:43:13 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
Mar  3 14:43:13 joker ACPI: PM-Timer IO Port: 0x808
Mar  3 14:43:13 joker ACPI: Local APIC address 0xfee00000
Mar  3 14:43:13 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar  3 14:43:13 joker Processor #0 6:10 APIC version 16
Mar  3 14:43:13 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
Mar  3 14:43:13 joker Detected 2198.080 MHz processor.
Mar  3 14:43:13 joker Built 1 zonelists.  Total pages: 130033
Mar  3 14:43:13 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off pci=noacpi mem=524224K
Mar  3 14:43:13 joker Found and enabled local APIC!
Mar  3 14:43:13 joker mapped APIC to ffffd000 (fee00000)
Mar  3 14:43:13 joker Enabling fast FPU save and restore... done.
Mar  3 14:43:13 joker Enabling unmasked SIMD FPU exception support... done.
Mar  3 14:43:13 joker Initializing CPU#0
Mar  3 14:43:13 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000
Mar  3 14:43:13 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar  3 14:43:13 joker Console: colour VGA+ 80x50
Mar  3 14:43:13 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar  3 14:43:13 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar  3 14:43:13 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem)
Mar  3 14:43:13 joker virtual kernel memory layout:
Mar  3 14:43:13 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
Mar  3 14:43:13 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
Mar  3 14:43:13 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
Mar  3 14:43:13 joker .init : 0xc02d1000 - 0xc0300000   ( 188 kB)
Mar  3 14:43:13 joker .data : 0xc024a4cd - 0xc02cf9b4   ( 533 kB)
Mar  3 14:43:13 joker .text : 0xc0100000 - 0xc024a4cd   (1321 kB)
Mar  3 14:43:13 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar  3 14:43:13 joker Calibrating delay using timer specific routine.. 4405.91 BogoMIPS (lpj=2546144)
Mar  3 14:43:13 joker Mount-cache hash table entries: 512
Mar  3 14:43:13 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar  3 14:43:13 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  3 14:43:13 joker CPU: L2 Cache: 512K (64 bytes/line)
Mar  3 14:43:13 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Mar  3 14:43:13 joker Intel machine check architecture supported.
Mar  3 14:43:13 joker Intel machine check reporting enabled on CPU#0.
Mar  3 14:43:13 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
Mar  3 14:43:13 joker Checking 'hlt' instruction... OK.
Mar  3 14:43:13 joker ACPI: Core revision 20070126
Mar  3 14:43:13 joker ACPI: setting ELCR to 1e20 (from 1c20)
Mar  3 14:43:13 joker NET: Registered protocol family 16
Mar  3 14:43:13 joker ACPI: bus type pci registered
Mar  3 14:43:13 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
Mar  3 14:43:13 joker PCI: Using configuration type 1
Mar  3 14:43:13 joker Setting up standard PCI resources
Mar  3 14:43:13 joker ACPI: Interpreter enabled
Mar  3 14:43:13 joker ACPI: (supports S0 S1 S3 S4 S5)
Mar  3 14:43:13 joker ACPI: Using PIC for interrupt routing
Mar  3 14:43:13 joker ACPI: Power Resource [URP1] (off)
Mar  3 14:43:13 joker ACPI: Power Resource [URP2] (off)
Mar  3 14:43:13 joker ACPI: Power Resource [FDDP] (off)
Mar  3 14:43:13 joker ACPI: Power Resource [LPTP] (off)
Mar  3 14:43:13 joker Linux Plug and Play Support v0.97 (c) Adam Belay
Mar  3 14:43:13 joker pnp: PnP ACPI init
Mar  3 14:43:13 joker pnp: PnP ACPI: found 11 devices
Mar  3 14:43:13 joker PCI: Probing PCI hardware
Mar  3 14:43:13 joker PCI: Probing PCI hardware (bus 00)
Mar  3 14:43:13 joker Boot video device is 0000:01:00.0
Mar  3 14:43:13 joker PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
Mar  3 14:43:13 joker PCI: setting IRQ 11 as level-triggered
Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0f.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  3 14:43:13 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
Mar  3 14:43:13 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
Mar  3 14:43:13 joker PCI: Bridge: 0000:00:01.0
Mar  3 14:43:13 joker IO window: disabled.
Mar  3 14:43:13 joker MEM window: dde00000-dfefffff
Mar  3 14:43:13 joker PREFETCH window: cdd00000-ddcfffff
Mar  3 14:43:13 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
Mar  3 14:43:13 joker NET: Registered protocol family 2
Mar  3 14:43:13 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar  3 14:43:13 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar  3 14:43:13 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar  3 14:43:13 joker TCP: Hash tables configured (established 16384 bind 16384)
Mar  3 14:43:13 joker TCP reno registered
Mar  3 14:43:13 joker checking if image is initramfs... it is
Mar  3 14:43:13 joker Freeing initrd memory: 864k freed
Mar  3 14:43:13 joker Machine check exception polling timer started.
Mar  3 14:43:13 joker VFS: Disk quotas dquot_6.5.1
Mar  3 14:43:13 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar  3 14:43:13 joker io scheduler noop registered
Mar  3 14:43:13 joker io scheduler anticipatory registered
Mar  3 14:43:13 joker io scheduler deadline registered
Mar  3 14:43:13 joker io scheduler cfq registered (default)
Mar  3 14:43:13 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
Mar  3 14:43:13 joker input: Power Button (FF) as /class/input/input0
Mar  3 14:43:13 joker ACPI: Power Button (FF) [PWRF]
Mar  3 14:43:13 joker input: Power Button (CM) as /class/input/input1
Mar  3 14:43:13 joker ACPI: Power Button (CM) [PWRB]
Mar  3 14:43:13 joker input: Sleep Button (CM) as /class/input/input2
Mar  3 14:43:13 joker ACPI: Sleep Button (CM) [SLPB]
Mar  3 14:43:13 joker isapnp: Scanning for PnP cards...
Mar  3 14:43:13 joker isapnp: No Plug & Play device found
Mar  3 14:43:13 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  3 14:43:13 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  3 14:43:13 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  3 14:43:13 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar  3 14:43:13 joker loop: loaded (max 8 devices)
Mar  3 14:43:13 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar  3 14:43:13 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
Mar  3 14:43:13 joker serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  3 14:43:13 joker serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  3 14:43:13 joker mice: PS/2 mouse device common for all mice
Mar  3 14:43:13 joker TCP cubic registered
Mar  3 14:43:13 joker NET: Registered protocol family 1
Mar  3 14:43:13 joker NET: Registered protocol family 17
Mar  3 14:43:13 joker Testing NMI watchdog ... OK.
Mar  3 14:43:13 joker Using IPI Shortcut mode
Mar  3 14:43:13 joker Freeing unused kernel memory: 188k freed
Mar  3 14:43:13 joker Time: tsc clocksource has been installed.
Mar  3 14:43:13 joker SCSI subsystem initialized
Mar  3 14:43:13 joker libata version 2.20 loaded.
Mar  3 14:43:13 joker pata_via 0000:00:0f.1: version 0.2.1
Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0f.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  3 14:43:13 joker PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 11
Mar  3 14:43:13 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
Mar  3 14:43:13 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
Mar  3 14:43:13 joker scsi0 : pata_via
Mar  3 14:43:13 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
Mar  3 14:43:13 joker ata1.00: 160086528 sectors, multi 16: LBA 
Mar  3 14:43:13 joker ata1.00: configured for UDMA/133
Mar  3 14:43:13 joker scsi1 : pata_via
Mar  3 14:43:13 joker Switched to high resolution mode on CPU 0
Mar  3 14:43:13 joker ata2.00: ATAPI, max UDMA/33
Mar  3 14:43:13 joker ata2.01: ATAPI, max UDMA/33
Mar  3 14:43:13 joker ata2.00: configured for UDMA/33
Mar  3 14:43:13 joker ata2.01: configured for UDMA/33
Mar  3 14:43:13 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Mar  3 14:43:13 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
Mar  3 14:43:13 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
Mar  3 14:43:13 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  3 14:43:13 joker sda: Write Protect is off
Mar  3 14:43:13 joker sda: Mode Sense: 00 3a 00 00
Mar  3 14:43:13 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  3 14:43:13 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  3 14:43:13 joker sda: Write Protect is off
Mar  3 14:43:13 joker sda: Mode Sense: 00 3a 00 00
Mar  3 14:43:13 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  3 14:43:13 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Mar  3 14:43:13 joker sd 0:0:0:0: Attached scsi disk sda
Mar  3 14:43:13 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Mar  3 14:43:13 joker Uniform CD-ROM driver Revision: 3.20
Mar  3 14:43:13 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar  3 14:43:13 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Mar  3 14:43:13 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
Mar  3 14:43:13 joker kjournald starting.  Commit interval 5 seconds
Mar  3 14:43:13 joker EXT3-fs: mounted filesystem with ordered data mode.
Mar  3 14:43:13 joker usbcore: registered new interface driver usbfs
Mar  3 14:43:13 joker usbcore: registered new interface driver hub
Mar  3 14:43:13 joker usbcore: registered new device driver usb
Mar  3 14:43:13 joker PCI: setting IRQ 5 as level-triggered
Mar  3 14:43:13 joker PCI: Found IRQ 5 for device 0000:00:0b.0
Mar  3 14:43:13 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
Mar  3 14:43:13 joker Real Time Clock Driver v1.12ac
Mar  3 14:43:13 joker i2c /dev entries driver
Mar  3 14:43:13 joker fuse init (API version 7.8)
Mar  3 14:43:13 joker spurious 8259A interrupt: IRQ7.
Mar  3 14:43:13 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar  3 14:43:13 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar  3 14:43:13 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
Mar  3 14:43:13 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
Mar  3 14:43:13 joker ieee1394: Initialized config rom entry `ip1394'
Mar  3 14:43:13 joker input: PC Speaker as /class/input/input3
Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0b.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  3 14:43:13 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Mar  3 14:43:13 joker PPP generic driver version 2.4.2
Mar  3 14:43:13 joker parport: PnPBIOS parport detected.
Mar  3 14:43:13 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar  3 14:43:13 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Mar  3 14:43:13 joker pnp: Device 00:07 does not support disabling.
Mar  3 14:43:13 joker rtc_cmos: probe of 00:07 failed with error -16
Mar  3 14:43:13 joker lp0: using parport0 (interrupt-driven).
Mar  3 14:43:13 joker ppdev: user-space parallel port driver
Mar  3 14:43:13 joker PCI: setting IRQ 12 as level-triggered
Mar  3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:0a.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:10.4
Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:11.5
Mar  3 14:43:13 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
Mar  3 14:43:13 joker sata_via 0000:00:0f.0: version 2.1
Mar  3 14:43:13 joker PCI: setting IRQ 10 as level-triggered
Mar  3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:0f.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.3
Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.2
Mar  3 14:43:13 joker sata_via 0000:00:0f.0: routed to hard irq line 10
Mar  3 14:43:13 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 10
Mar  3 14:43:13 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 10
Mar  3 14:43:13 joker scsi2 : sata_via
Mar  3 14:43:13 joker USB Universal Host Controller Interface driver v3.0
Mar  3 14:43:13 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  3 14:43:13 joker ATA: abnormal status 0x7F on port 0x0001e807
Mar  3 14:43:13 joker scsi3 : sata_via
Mar  3 14:43:13 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
Mar  3 14:43:13 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  3 14:43:13 joker ATA: abnormal status 0x7F on port 0x0001e007
Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:10.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.0: irq 11, io base 0x0000c000
Mar  3 14:43:13 joker usb usb1: configuration #1 chosen from 1 choice
Mar  3 14:43:13 joker hub 1-0:1.0: USB hub found
Mar  3 14:43:13 joker hub 1-0:1.0: 2 ports detected
Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:10.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.1: irq 11, io base 0x0000c400
Mar  3 14:43:13 joker usb usb2: configuration #1 chosen from 1 choice
Mar  3 14:43:13 joker hub 2-0:1.0: USB hub found
Mar  3 14:43:13 joker hub 2-0:1.0: 2 ports detected
Mar  3 14:43:13 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
Mar  3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:10.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:0f.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.3
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.2: irq 10, io base 0x0000c800
Mar  3 14:43:13 joker usb usb3: configuration #1 chosen from 1 choice
Mar  3 14:43:13 joker hub 3-0:1.0: USB hub found
Mar  3 14:43:13 joker hub 3-0:1.0: 2 ports detected
Mar  3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:10.3
Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:0f.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.2
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Mar  3 14:43:13 joker uhci_hcd 0000:00:10.3: irq 10, io base 0x0000cc00
Mar  3 14:43:13 joker usb usb4: configuration #1 chosen from 1 choice
Mar  3 14:43:13 joker hub 4-0:1.0: USB hub found
Mar  3 14:43:13 joker hub 4-0:1.0: 2 ports detected
Mar  3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:10.4
Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:0a.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:11.5
Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: irq 12, io mem 0xdfff9600
Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  3 14:43:13 joker usb usb5: configuration #1 chosen from 1 choice
Mar  3 14:43:13 joker hub 5-0:1.0: USB hub found
Mar  3 14:43:13 joker hub 5-0:1.0: 8 ports detected
Mar  3 14:43:13 joker input: AT Translated Set 2 keyboard as /class/input/input4
Mar  3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:11.5
Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:0a.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:10.4
Mar  3 14:43:13 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:12.0
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  3 14:43:13 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 11.
Mar  3 14:43:13 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Mar  3 14:43:13 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
Mar  3 14:43:13 joker EXT3 FS on sda2, internal journal
Mar  3 14:43:13 joker usb 2-1: configuration #1 chosen from 1 choice
Mar  3 14:43:13 joker usbcore: registered new interface driver hiddev
Mar  3 14:43:13 joker input: HID 1241:1177 as /class/input/input5
Mar  3 14:43:13 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
Mar  3 14:43:13 joker usbcore: registered new interface driver usbhid
Mar  3 14:43:13 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  3 14:43:13 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
Mar  3 14:43:13 joker init: Going single user
Mar  3 14:43:29 joker shutdown[4217]: shutting down for system reboot
Mar  3 14:43:29 joker init: Switching to runlevel: 6
Mar  3 14:43:30 joker syslog-ng[4211]: SIGTERM received, terminating;  
Mar  3 14:43:30 joker syslog-ng[4211]: syslog-ng shutting down; version='2.0.0' 


I hope that's informative. Cheers.

Ash

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Ash Milsted]

On Sat, 3 Mar 2007 15:14:24 +0000
Ash Milsted <thatistosayiseenem@gawab.com> wrote:

> Hi,
> With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> with one of the following on the command-line:
>  - nolapic
>  - irqfixup
>  - pci=noacpi
> Otherwise it gets stuck with the numlock on.
> The following options have no effect:
>  - nohz=off (who knows eh?)
>  - pci=nomsi
> 
> Here is my lspci:
> 00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
> 00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
> 00:0a.0 Network controller: RaLink RT2500 802.11g Cardbus/mini-PCI (rev 01)
> 00:0b.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
> 00:0b.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
> 00:0b.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
> 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
> 00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
> 00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
> 00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
> 00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
> 00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
> 00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
> 01:00.0 VGA compatible controller: nVidia Corporation NV11 [GeForce2 MX/MX 400] (rev a1)
> 
> And here is a boot log without any of those parameters (keyboard fails):
> Mar  3 14:38:24 joker syslog-ng[4183]: syslog-ng starting up; version='2.0.0' 
> Mar  3 14:38:24 joker a0000 (reserved)
> Mar  3 14:38:24 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:38:24 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:38:24 joker user-defined physical RAM map:
> Mar  3 14:38:24 joker user: 0000000000000000 - 000000000009fc00 (usable)
> Mar  3 14:38:24 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
> Mar  3 14:38:24 joker user: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:38:24 joker user: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:38:24 joker 511MB LOWMEM available.
> Mar  3 14:38:24 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
> Mar  3 14:38:24 joker Zone PFN ranges:
> Mar  3 14:38:24 joker DMA             0 ->     4096
> Mar  3 14:38:24 joker Normal       4096 ->   131056
> Mar  3 14:38:24 joker early_node_map[1] active PFN ranges
> Mar  3 14:38:24 joker 0:        0 ->   131056
> Mar  3 14:38:24 joker On node 0 totalpages: 131056
> Mar  3 14:38:24 joker DMA zone: 32 pages used for memmap
> Mar  3 14:38:24 joker DMA zone: 0 pages reserved
> Mar  3 14:38:24 joker DMA zone: 4064 pages, LIFO batch:0
> Mar  3 14:38:24 joker Normal zone: 991 pages used for memmap
> Mar  3 14:38:24 joker Normal zone: 125969 pages, LIFO batch:31
> Mar  3 14:38:24 joker DMI 2.3 present.
> Mar  3 14:38:24 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
> Mar  3 14:38:24 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
> Mar  3 14:38:24 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
> Mar  3 14:38:24 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
> Mar  3 14:38:24 joker ACPI: FACS 1FFF8000, 0040
> Mar  3 14:38:24 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
> Mar  3 14:38:24 joker ACPI: PM-Timer IO Port: 0x808
> Mar  3 14:38:24 joker ACPI: Local APIC address 0xfee00000
> Mar  3 14:38:24 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Mar  3 14:38:24 joker Processor #0 6:10 APIC version 16
> Mar  3 14:38:24 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> Mar  3 14:38:24 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
> Mar  3 14:38:24 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> Mar  3 14:38:24 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> Mar  3 14:38:24 joker ACPI: IRQ0 used by override.
> Mar  3 14:38:24 joker ACPI: IRQ2 used by override.
> Mar  3 14:38:24 joker ACPI: IRQ9 used by override.
> Mar  3 14:38:24 joker Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Mar  3 14:38:24 joker Using ACPI (MADT) for SMP configuration information
> Mar  3 14:38:24 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
> Mar  3 14:38:24 joker Detected 2198.080 MHz processor.
> Mar  3 14:38:24 joker Built 1 zonelists.  Total pages: 130033
> Mar  3 14:38:24 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off mem=524224K
> Mar  3 14:38:24 joker mapped APIC to ffffd000 (fee00000)
> Mar  3 14:38:24 joker mapped IOAPIC to ffffc000 (fec00000)
> Mar  3 14:38:24 joker Enabling fast FPU save and restore... done.
> Mar  3 14:38:24 joker Enabling unmasked SIMD FPU exception support... done.
> Mar  3 14:38:24 joker Initializing CPU#0
> Mar  3 14:38:24 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000
> Mar  3 14:38:24 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
> Mar  3 14:38:24 joker Console: colour VGA+ 80x50
> Mar  3 14:38:24 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Mar  3 14:38:24 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Mar  3 14:38:24 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem)
> Mar  3 14:38:24 joker virtual kernel memory layout:
> Mar  3 14:38:24 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
> Mar  3 14:38:24 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
> Mar  3 14:38:24 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
> Mar  3 14:38:24 joker .init : 0xc02d1000 - 0xc0300000   ( 188 kB)
> Mar  3 14:38:24 joker .data : 0xc024a4cd - 0xc02cf9b4   ( 533 kB)
> Mar  3 14:38:24 joker .text : 0xc0100000 - 0xc024a4cd   (1321 kB)
> Mar  3 14:38:24 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Mar  3 14:38:24 joker Calibrating delay using timer specific routine.. 4405.92 BogoMIPS (lpj=2546149)
> Mar  3 14:38:24 joker Mount-cache hash table entries: 512
> Mar  3 14:38:24 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
> Mar  3 14:38:24 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> Mar  3 14:38:24 joker CPU: L2 Cache: 512K (64 bytes/line)
> Mar  3 14:38:24 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
> Mar  3 14:38:24 joker Intel machine check architecture supported.
> Mar  3 14:38:24 joker Intel machine check reporting enabled on CPU#0.
> Mar  3 14:38:24 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
> Mar  3 14:38:24 joker Checking 'hlt' instruction... OK.
> Mar  3 14:38:24 joker ACPI: Core revision 20070126
> Mar  3 14:38:24 joker ENABLING IO-APIC IRQs
> Mar  3 14:38:24 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> Mar  3 14:38:24 joker NET: Registered protocol family 16
> Mar  3 14:38:24 joker ACPI: bus type pci registered
> Mar  3 14:38:24 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
> Mar  3 14:38:24 joker PCI: Using configuration type 1
> Mar  3 14:38:24 joker Setting up standard PCI resources
> Mar  3 14:38:24 joker ACPI: Interpreter enabled
> Mar  3 14:38:24 joker ACPI: (supports S0 S1 S3 S4 S5)
> Mar  3 14:38:24 joker ACPI: Using IOAPIC for interrupt routing
> Mar  3 14:38:24 joker ACPI: PCI Root Bridge [PCI0] (0000:00)
> Mar  3 14:38:24 joker PCI: Probing PCI hardware (bus 00)
> Mar  3 14:38:24 joker Boot video device is 0000:01:00.0
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:38:24 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:38:24 joker ACPI: Power Resource [URP1] (off)
> Mar  3 14:38:24 joker ACPI: Power Resource [URP2] (off)
> Mar  3 14:38:24 joker ACPI: Power Resource [FDDP] (off)
> Mar  3 14:38:24 joker ACPI: Power Resource [LPTP] (off)
> Mar  3 14:38:24 joker Linux Plug and Play Support v0.97 (c) Adam Belay
> Mar  3 14:38:24 joker pnp: PnP ACPI init
> Mar  3 14:38:24 joker pnp: PnP ACPI: found 11 devices
> Mar  3 14:38:24 joker PCI: Using ACPI for IRQ routing
> Mar  3 14:38:24 joker PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> Mar  3 14:38:24 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
> Mar  3 14:38:24 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
> Mar  3 14:38:24 joker PCI: Bridge: 0000:00:01.0
> Mar  3 14:38:24 joker IO window: disabled.
> Mar  3 14:38:24 joker MEM window: dde00000-dfefffff
> Mar  3 14:38:24 joker PREFETCH window: cdd00000-ddcfffff
> Mar  3 14:38:24 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
> Mar  3 14:38:24 joker NET: Registered protocol family 2
> Mar  3 14:38:24 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> Mar  3 14:38:24 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> Mar  3 14:38:24 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> Mar  3 14:38:24 joker TCP: Hash tables configured (established 16384 bind 16384)
> Mar  3 14:38:24 joker TCP reno registered
> Mar  3 14:38:24 joker checking if image is initramfs... it is
> Mar  3 14:38:24 joker Freeing initrd memory: 864k freed
> Mar  3 14:38:24 joker Machine check exception polling timer started.
> Mar  3 14:38:24 joker VFS: Disk quotas dquot_6.5.1
> Mar  3 14:38:24 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Mar  3 14:38:24 joker io scheduler noop registered
> Mar  3 14:38:24 joker io scheduler anticipatory registered
> Mar  3 14:38:24 joker io scheduler deadline registered
> Mar  3 14:38:24 joker io scheduler cfq registered (default)
> Mar  3 14:38:24 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
> Mar  3 14:38:24 joker input: Power Button (FF) as /class/input/input0
> Mar  3 14:38:24 joker ACPI: Power Button (FF) [PWRF]
> Mar  3 14:38:24 joker input: Power Button (CM) as /class/input/input1
> Mar  3 14:38:24 joker ACPI: Power Button (CM) [PWRB]
> Mar  3 14:38:24 joker input: Sleep Button (CM) as /class/input/input2
> Mar  3 14:38:24 joker ACPI: Sleep Button (CM) [SLPB]
> Mar  3 14:38:24 joker isapnp: Scanning for PnP cards...
> Mar  3 14:38:24 joker isapnp: No Plug & Play device found
> Mar  3 14:38:24 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> Mar  3 14:38:24 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Mar  3 14:38:24 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Mar  3 14:38:24 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> Mar  3 14:38:24 joker loop: loaded (max 8 devices)
> Mar  3 14:38:24 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> Mar  3 14:38:24 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
> Mar  3 14:38:24 joker serio: i8042 KBD port at 0x60,0x64 irq 1
> Mar  3 14:38:24 joker serio: i8042 AUX port at 0x60,0x64 irq 12
> Mar  3 14:38:24 joker mice: PS/2 mouse device common for all mice
> Mar  3 14:38:24 joker TCP cubic registered
> Mar  3 14:38:24 joker NET: Registered protocol family 1
> Mar  3 14:38:24 joker NET: Registered protocol family 17
> Mar  3 14:38:24 joker Using IPI Shortcut mode
> Mar  3 14:38:24 joker Time: tsc clocksource has been installed.
> Mar  3 14:38:24 joker Freeing unused kernel memory: 188k freed
> Mar  3 14:38:24 joker SCSI subsystem initialized
> Mar  3 14:38:24 joker libata version 2.20 loaded.
> Mar  3 14:38:24 joker pata_via 0000:00:0f.1: version 0.2.1
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
> Mar  3 14:38:24 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
> Mar  3 14:38:24 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
> Mar  3 14:38:24 joker scsi0 : pata_via
> Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
> Mar  3 14:38:24 joker ata1.00: 160086528 sectors, multi 16: LBA 
> Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ata1.00: configured for UDMA/133
> Mar  3 14:38:24 joker scsi1 : pata_via
> Mar  3 14:38:24 joker Switched to high resolution mode on CPU 0
> Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ata2.00: ATAPI, max UDMA/33
> Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ata2.01: ATAPI, max UDMA/33
> Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ata2.00: configured for UDMA/33
> Mar  3 14:38:24 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:38:24 joker ata2.01: configured for UDMA/33
> Mar  3 14:38:24 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
> Mar  3 14:38:24 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
> Mar  3 14:38:24 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
> Mar  3 14:38:24 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> Mar  3 14:38:24 joker sda: Write Protect is off
> Mar  3 14:38:24 joker sda: Mode Sense: 00 3a 00 00
> Mar  3 14:38:24 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Mar  3 14:38:24 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> Mar  3 14:38:24 joker sda: Write Protect is off
> Mar  3 14:38:24 joker sda: Mode Sense: 00 3a 00 00
> Mar  3 14:38:24 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Mar  3 14:38:24 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> Mar  3 14:38:24 joker sd 0:0:0:0: Attached scsi disk sda
> Mar  3 14:38:24 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
> Mar  3 14:38:24 joker Uniform CD-ROM driver Revision: 3.20
> Mar  3 14:38:24 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
> Mar  3 14:38:24 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
> Mar  3 14:38:24 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
> Mar  3 14:38:24 joker kjournald starting.  Commit interval 5 seconds
> Mar  3 14:38:24 joker EXT3-fs: mounted filesystem with ordered data mode.
> Mar  3 14:38:24 joker usbcore: registered new interface driver usbfs
> Mar  3 14:38:24 joker usbcore: registered new interface driver hub
> Mar  3 14:38:24 joker usbcore: registered new device driver usb
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
> Mar  3 14:38:24 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
> Mar  3 14:38:24 joker Real Time Clock Driver v1.12ac
> Mar  3 14:38:24 joker i2c /dev entries driver
> Mar  3 14:38:24 joker fuse init (API version 7.8)
> Mar  3 14:38:24 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
> Mar  3 14:38:24 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
> Mar  3 14:38:24 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
> Mar  3 14:38:24 joker input: PC Speaker as /class/input/input3
> Mar  3 14:38:24 joker PPP generic driver version 2.4.2
> Mar  3 14:38:24 joker ieee1394: Initialized config rom entry `ip1394'
> Mar  3 14:38:24 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
> Mar  3 14:38:24 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 19
> Mar  3 14:38:24 joker USB Universal Host Controller Interface driver v3.0
> Mar  3 14:38:24 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000
> Mar  3 14:38:24 joker usb usb1: configuration #1 chosen from 1 choice
> Mar  3 14:38:24 joker hub 1-0:1.0: USB hub found
> Mar  3 14:38:24 joker hub 1-0:1.0: 2 ports detected
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c400
> Mar  3 14:38:24 joker usb usb2: configuration #1 chosen from 1 choice
> Mar  3 14:38:24 joker hub 2-0:1.0: USB hub found
> Mar  3 14:38:24 joker hub 2-0:1.0: 2 ports detected
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c800
> Mar  3 14:38:24 joker usb usb3: configuration #1 chosen from 1 choice
> Mar  3 14:38:24 joker hub 3-0:1.0: USB hub found
> Mar  3 14:38:24 joker hub 3-0:1.0: 2 ports detected
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> Mar  3 14:38:24 joker uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00
> Mar  3 14:38:24 joker usb usb4: configuration #1 chosen from 1 choice
> Mar  3 14:38:24 joker hub 4-0:1.0: USB hub found
> Mar  3 14:38:24 joker hub 4-0:1.0: 2 ports detected
> Mar  3 14:38:24 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
> Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
> Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: irq 20, io mem 0xdfff9600
> Mar  3 14:38:24 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> Mar  3 14:38:24 joker usb usb5: configuration #1 chosen from 1 choice
> Mar  3 14:38:24 joker hub 5-0:1.0: USB hub found
> Mar  3 14:38:24 joker hub 5-0:1.0: 8 ports detected
> Mar  3 14:38:24 joker usb 2-1: unable to read config index 0 descriptor/start
> Mar  3 14:38:24 joker usb 2-1: chopping to 0 config(s)
> Mar  3 14:38:24 joker usb 2-1: no configuration chosen from 0 choices
> Mar  3 14:38:24 joker parport: PnPBIOS parport detected.
> Mar  3 14:38:24 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> Mar  3 14:38:24 joker sata_via 0000:00:0f.0: version 2.1
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
> Mar  3 14:38:24 joker sata_via 0000:00:0f.0: routed to hard irq line 10
> Mar  3 14:38:24 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16
> Mar  3 14:38:24 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16
> Mar  3 14:38:24 joker scsi2 : sata_via
> Mar  3 14:38:24 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> Mar  3 14:38:24 joker pnp: Device 00:07 does not support disabling.
> Mar  3 14:38:24 joker rtc_cmos: probe of 00:07 failed with error -16
> Mar  3 14:38:24 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> Mar  3 14:38:24 joker ATA: abnormal status 0x7F on port 0x0001e807
> Mar  3 14:38:24 joker scsi3 : sata_via
> Mar  3 14:38:24 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
> Mar  3 14:38:24 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> Mar  3 14:38:24 joker ATA: abnormal status 0x7F on port 0x0001e007
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
> Mar  3 14:38:24 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
> Mar  3 14:38:24 joker usb 2-1: USB disconnect, address 2
> Mar  3 14:38:24 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
> Mar  3 14:38:24 joker lp0: using parport0 (interrupt-driven).
> Mar  3 14:38:24 joker ppdev: user-space parallel port driver
> Mar  3 14:38:24 joker usb 2-1: new low speed USB device using uhci_hcd and address 3
> Mar  3 14:38:24 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22
> Mar  3 14:38:24 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 22.
> Mar  3 14:38:24 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
> Mar  3 14:38:24 joker usb 2-1: configuration #1 chosen from 1 choice
> Mar  3 14:38:24 joker usbcore: registered new interface driver hiddev
> Mar  3 14:38:24 joker input: HID 1241:1177 as /class/input/input4
> Mar  3 14:38:24 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
> Mar  3 14:38:24 joker usbcore: registered new interface driver usbhid
> Mar  3 14:38:24 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> Mar  3 14:38:24 joker EXT3 FS on sda2, internal journal
> Mar  3 14:38:24 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
> Mar  3 14:38:24 joker init: Going single user
> 
> An here's one with irqfixup (after a cold boot - doesn't always work after a warm boot) (keyboard works):
> Mar  3 14:41:52 joker syslog-ng[4191]: syslog-ng starting up; version='2.0.0' 
> Mar  3 14:41:52 joker 000 (usable)
> Mar  3 14:41:52 joker user-defined physical RAM map:
> Mar  3 14:41:52 joker user: 0000000000000000 - 000000000009fc00 (usable)
> Mar  3 14:41:52 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
> Mar  3 14:41:52 joker user: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:41:52 joker user: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:41:52 joker 511MB LOWMEM available.
> Mar  3 14:41:52 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
> Mar  3 14:41:52 joker Zone PFN ranges:
> Mar  3 14:41:52 joker DMA             0 ->     4096
> Mar  3 14:41:52 joker Normal       4096 ->   131056
> Mar  3 14:41:52 joker early_node_map[1] active PFN ranges
> Mar  3 14:41:52 joker 0:        0 ->   131056
> Mar  3 14:41:52 joker On node 0 totalpages: 131056
> Mar  3 14:41:52 joker DMA zone: 32 pages used for memmap
> Mar  3 14:41:52 joker DMA zone: 0 pages reserved
> Mar  3 14:41:52 joker DMA zone: 4064 pages, LIFO batch:0
> Mar  3 14:41:52 joker Normal zone: 991 pages used for memmap
> Mar  3 14:41:52 joker Normal zone: 125969 pages, LIFO batch:31
> Mar  3 14:41:52 joker DMI 2.3 present.
> Mar  3 14:41:52 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
> Mar  3 14:41:52 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
> Mar  3 14:41:52 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
> Mar  3 14:41:52 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
> Mar  3 14:41:52 joker ACPI: FACS 1FFF8000, 0040
> Mar  3 14:41:52 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
> Mar  3 14:41:52 joker ACPI: PM-Timer IO Port: 0x808
> Mar  3 14:41:52 joker ACPI: Local APIC address 0xfee00000
> Mar  3 14:41:52 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Mar  3 14:41:52 joker Processor #0 6:10 APIC version 16
> Mar  3 14:41:52 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> Mar  3 14:41:52 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
> Mar  3 14:41:52 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> Mar  3 14:41:52 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> Mar  3 14:41:52 joker ACPI: IRQ0 used by override.
> Mar  3 14:41:52 joker ACPI: IRQ2 used by override.
> Mar  3 14:41:52 joker ACPI: IRQ9 used by override.
> Mar  3 14:41:52 joker Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Mar  3 14:41:52 joker Using ACPI (MADT) for SMP configuration information
> Mar  3 14:41:52 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
> Mar  3 14:41:52 joker Detected 2198.080 MHz processor.
> Mar  3 14:41:52 joker Built 1 zonelists.  Total pages: 130033
> Mar  3 14:41:52 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off irqfixup mem=524224K
> Mar  3 14:41:52 joker Misrouted IRQ fixup support enabled.
> Mar  3 14:41:52 joker This may impact system performance.
> Mar  3 14:41:52 joker mapped APIC to ffffd000 (fee00000)
> Mar  3 14:41:52 joker mapped IOAPIC to ffffc000 (fec00000)
> Mar  3 14:41:52 joker Enabling fast FPU save and restore... done.
> Mar  3 14:41:52 joker Enabling unmasked SIMD FPU exception support... done.
> Mar  3 14:41:52 joker Initializing CPU#0
> Mar  3 14:41:52 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000
> Mar  3 14:41:52 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
> Mar  3 14:41:52 joker Console: colour VGA+ 80x50
> Mar  3 14:41:52 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Mar  3 14:41:52 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Mar  3 14:41:52 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem)
> Mar  3 14:41:52 joker virtual kernel memory layout:
> Mar  3 14:41:52 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
> Mar  3 14:41:52 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
> Mar  3 14:41:52 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
> Mar  3 14:41:52 joker .init : 0xc02d1000 - 0xc0300000   ( 188 kB)
> Mar  3 14:41:52 joker .data : 0xc024a4cd - 0xc02cf9b4   ( 533 kB)
> Mar  3 14:41:52 joker .text : 0xc0100000 - 0xc024a4cd   (1321 kB)
> Mar  3 14:41:52 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Mar  3 14:41:52 joker Calibrating delay using timer specific routine.. 4405.92 BogoMIPS (lpj=2546145)
> Mar  3 14:41:52 joker Mount-cache hash table entries: 512
> Mar  3 14:41:52 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
> Mar  3 14:41:52 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> Mar  3 14:41:52 joker CPU: L2 Cache: 512K (64 bytes/line)
> Mar  3 14:41:52 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
> Mar  3 14:41:52 joker Intel machine check architecture supported.
> Mar  3 14:41:52 joker Intel machine check reporting enabled on CPU#0.
> Mar  3 14:41:52 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
> Mar  3 14:41:52 joker Checking 'hlt' instruction... OK.
> Mar  3 14:41:52 joker ACPI: Core revision 20070126
> Mar  3 14:41:52 joker ENABLING IO-APIC IRQs
> Mar  3 14:41:52 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> Mar  3 14:41:52 joker NET: Registered protocol family 16
> Mar  3 14:41:52 joker ACPI: bus type pci registered
> Mar  3 14:41:52 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
> Mar  3 14:41:52 joker PCI: Using configuration type 1
> Mar  3 14:41:52 joker Setting up standard PCI resources
> Mar  3 14:41:52 joker ACPI: Interpreter enabled
> Mar  3 14:41:52 joker ACPI: (supports S0 S1 S3 S4 S5)
> Mar  3 14:41:52 joker ACPI: Using IOAPIC for interrupt routing
> Mar  3 14:41:52 joker ACPI: PCI Root Bridge [PCI0] (0000:00)
> Mar  3 14:41:52 joker PCI: Probing PCI hardware (bus 00)
> Mar  3 14:41:52 joker Boot video device is 0000:01:00.0
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:41:52 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
> Mar  3 14:41:52 joker ACPI: Power Resource [URP1] (off)
> Mar  3 14:41:52 joker ACPI: Power Resource [URP2] (off)
> Mar  3 14:41:52 joker ACPI: Power Resource [FDDP] (off)
> Mar  3 14:41:52 joker ACPI: Power Resource [LPTP] (off)
> Mar  3 14:41:52 joker Linux Plug and Play Support v0.97 (c) Adam Belay
> Mar  3 14:41:52 joker pnp: PnP ACPI init
> Mar  3 14:41:52 joker pnp: PnP ACPI: found 11 devices
> Mar  3 14:41:52 joker PCI: Using ACPI for IRQ routing
> Mar  3 14:41:52 joker PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
> Mar  3 14:41:52 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
> Mar  3 14:41:52 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
> Mar  3 14:41:52 joker PCI: Bridge: 0000:00:01.0
> Mar  3 14:41:52 joker IO window: disabled.
> Mar  3 14:41:52 joker MEM window: dde00000-dfefffff
> Mar  3 14:41:52 joker PREFETCH window: cdd00000-ddcfffff
> Mar  3 14:41:52 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
> Mar  3 14:41:52 joker NET: Registered protocol family 2
> Mar  3 14:41:52 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> Mar  3 14:41:52 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> Mar  3 14:41:52 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> Mar  3 14:41:52 joker TCP: Hash tables configured (established 16384 bind 16384)
> Mar  3 14:41:52 joker TCP reno registered
> Mar  3 14:41:52 joker checking if image is initramfs... it is
> Mar  3 14:41:52 joker Freeing initrd memory: 864k freed
> Mar  3 14:41:52 joker Machine check exception polling timer started.
> Mar  3 14:41:52 joker VFS: Disk quotas dquot_6.5.1
> Mar  3 14:41:52 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Mar  3 14:41:52 joker io scheduler noop registered
> Mar  3 14:41:52 joker io scheduler anticipatory registered
> Mar  3 14:41:52 joker io scheduler deadline registered
> Mar  3 14:41:52 joker io scheduler cfq registered (default)
> Mar  3 14:41:52 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
> Mar  3 14:41:52 joker input: Power Button (FF) as /class/input/input0
> Mar  3 14:41:52 joker ACPI: Power Button (FF) [PWRF]
> Mar  3 14:41:52 joker input: Power Button (CM) as /class/input/input1
> Mar  3 14:41:52 joker ACPI: Power Button (CM) [PWRB]
> Mar  3 14:41:52 joker input: Sleep Button (CM) as /class/input/input2
> Mar  3 14:41:52 joker ACPI: Sleep Button (CM) [SLPB]
> Mar  3 14:41:52 joker isapnp: Scanning for PnP cards...
> Mar  3 14:41:52 joker isapnp: No Plug & Play device found
> Mar  3 14:41:52 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> Mar  3 14:41:52 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Mar  3 14:41:52 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Mar  3 14:41:52 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> Mar  3 14:41:52 joker loop: loaded (max 8 devices)
> Mar  3 14:41:52 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> Mar  3 14:41:52 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
> Mar  3 14:41:52 joker serio: i8042 KBD port at 0x60,0x64 irq 1
> Mar  3 14:41:52 joker serio: i8042 AUX port at 0x60,0x64 irq 12
> Mar  3 14:41:52 joker mice: PS/2 mouse device common for all mice
> Mar  3 14:41:52 joker TCP cubic registered
> Mar  3 14:41:52 joker NET: Registered protocol family 1
> Mar  3 14:41:52 joker NET: Registered protocol family 17
> Mar  3 14:41:52 joker Using IPI Shortcut mode
> Mar  3 14:41:52 joker Time: tsc clocksource has been installed.
> Mar  3 14:41:52 joker Freeing unused kernel memory: 188k freed
> Mar  3 14:41:52 joker SCSI subsystem initialized
> Mar  3 14:41:52 joker libata version 2.20 loaded.
> Mar  3 14:41:52 joker pata_via 0000:00:0f.1: version 0.2.1
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
> Mar  3 14:41:52 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
> Mar  3 14:41:52 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
> Mar  3 14:41:52 joker scsi0 : pata_via
> Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
> Mar  3 14:41:52 joker ata1.00: 160086528 sectors, multi 16: LBA 
> Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c147489c), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ata1.00: configured for UDMA/133
> Mar  3 14:41:52 joker scsi1 : pata_via
> Mar  3 14:41:52 joker Switched to high resolution mode on CPU 0
> Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ata2.00: ATAPI, max UDMA/33
> Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ata2.01: ATAPI, max UDMA/33
> Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ata2.00: configured for UDMA/33
> Mar  3 14:41:52 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1474f04), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14747d4), AE_AML_OPERAND_VALUE
> Mar  3 14:41:52 joker ata2.01: configured for UDMA/33
> Mar  3 14:41:52 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
> Mar  3 14:41:52 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
> Mar  3 14:41:52 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
> Mar  3 14:41:52 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> Mar  3 14:41:52 joker sda: Write Protect is off
> Mar  3 14:41:52 joker sda: Mode Sense: 00 3a 00 00
> Mar  3 14:41:52 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Mar  3 14:41:52 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> Mar  3 14:41:52 joker sda: Write Protect is off
> Mar  3 14:41:52 joker sda: Mode Sense: 00 3a 00 00
> Mar  3 14:41:52 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Mar  3 14:41:52 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> Mar  3 14:41:52 joker sd 0:0:0:0: Attached scsi disk sda
> Mar  3 14:41:52 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
> Mar  3 14:41:52 joker Uniform CD-ROM driver Revision: 3.20
> Mar  3 14:41:52 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
> Mar  3 14:41:52 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
> Mar  3 14:41:52 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
> Mar  3 14:41:52 joker input: AT Translated Set 2 keyboard as /class/input/input3
> Mar  3 14:41:52 joker EXT3-fs: INFO: recovery required on readonly filesystem.
> Mar  3 14:41:52 joker EXT3-fs: write access will be enabled during recovery.
> Mar  3 14:41:52 joker kjournald starting.  Commit interval 5 seconds
> Mar  3 14:41:52 joker EXT3-fs: recovery complete.
> Mar  3 14:41:52 joker EXT3-fs: mounted filesystem with ordered data mode.
> Mar  3 14:41:52 joker usbcore: registered new interface driver usbfs
> Mar  3 14:41:52 joker usbcore: registered new interface driver hub
> Mar  3 14:41:52 joker usbcore: registered new device driver usb
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
> Mar  3 14:41:52 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
> Mar  3 14:41:52 joker Real Time Clock Driver v1.12ac
> Mar  3 14:41:52 joker i2c /dev entries driver
> Mar  3 14:41:52 joker fuse init (API version 7.8)
> Mar  3 14:41:52 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
> Mar  3 14:41:52 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
> Mar  3 14:41:52 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
> Mar  3 14:41:52 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
> Mar  3 14:41:52 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
> Mar  3 14:41:52 joker ieee1394: Initialized config rom entry `ip1394'
> Mar  3 14:41:52 joker PPP generic driver version 2.4.2
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 19
> Mar  3 14:41:52 joker parport: PnPBIOS parport detected.
> Mar  3 14:41:52 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> Mar  3 14:41:52 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> Mar  3 14:41:52 joker pnp: Device 00:07 does not support disabling.
> Mar  3 14:41:52 joker rtc_cmos: probe of 00:07 failed with error -16
> Mar  3 14:41:52 joker input: PC Speaker as /class/input/input4
> Mar  3 14:41:52 joker USB Universal Host Controller Interface driver v3.0
> Mar  3 14:41:52 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
> Mar  3 14:41:52 joker sata_via 0000:00:0f.0: version 2.1
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
> Mar  3 14:41:52 joker sata_via 0000:00:0f.0: routed to hard irq line 10
> Mar  3 14:41:52 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16
> Mar  3 14:41:52 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16
> Mar  3 14:41:52 joker scsi2 : sata_via
> Mar  3 14:41:52 joker lp0: using parport0 (interrupt-driven).
> Mar  3 14:41:52 joker ppdev: user-space parallel port driver
> Mar  3 14:41:52 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> Mar  3 14:41:52 joker ATA: abnormal status 0x7F on port 0x0001e807
> Mar  3 14:41:52 joker scsi3 : sata_via
> Mar  3 14:41:52 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> Mar  3 14:41:52 joker ATA: abnormal status 0x7F on port 0x0001e007
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.0: irq 20, io base 0x0000c000
> Mar  3 14:41:52 joker usb usb1: configuration #1 chosen from 1 choice
> Mar  3 14:41:52 joker hub 1-0:1.0: USB hub found
> Mar  3 14:41:52 joker hub 1-0:1.0: 2 ports detected
> Mar  3 14:41:52 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
> Mar  3 14:41:52 joker atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.1: irq 20, io base 0x0000c400
> Mar  3 14:41:52 joker usb usb2: configuration #1 chosen from 1 choice
> Mar  3 14:41:52 joker hub 2-0:1.0: USB hub found
> Mar  3 14:41:52 joker hub 2-0:1.0: 2 ports detected
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.2: irq 20, io base 0x0000c800
> Mar  3 14:41:52 joker usb usb3: configuration #1 chosen from 1 choice
> Mar  3 14:41:52 joker hub 3-0:1.0: USB hub found
> Mar  3 14:41:52 joker hub 3-0:1.0: 2 ports detected
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> Mar  3 14:41:52 joker uhci_hcd 0000:00:10.3: irq 20, io base 0x0000cc00
> Mar  3 14:41:52 joker usb usb4: configuration #1 chosen from 1 choice
> Mar  3 14:41:52 joker hub 4-0:1.0: USB hub found
> Mar  3 14:41:52 joker hub 4-0:1.0: 2 ports detected
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 20
> Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
> Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
> Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: irq 20, io mem 0xdfff9600
> Mar  3 14:41:52 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> Mar  3 14:41:52 joker usb usb5: configuration #1 chosen from 1 choice
> Mar  3 14:41:52 joker hub 5-0:1.0: USB hub found
> Mar  3 14:41:52 joker hub 5-0:1.0: 8 ports detected
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 21
> Mar  3 14:41:52 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
> Mar  3 14:41:52 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
> Mar  3 14:41:52 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 22
> Mar  3 14:41:52 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 22.
> Mar  3 14:41:52 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
> Mar  3 14:41:52 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
> Mar  3 14:41:52 joker EXT3 FS on sda2, internal journal
> Mar  3 14:41:52 joker usb 2-1: configuration #1 chosen from 1 choice
> Mar  3 14:41:52 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
> Mar  3 14:41:52 joker usbcore: registered new interface driver hiddev
> Mar  3 14:41:52 joker input: HID 1241:1177 as /class/input/input5
> Mar  3 14:41:52 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
> Mar  3 14:41:52 joker usbcore: registered new interface driver usbhid
> Mar  3 14:41:52 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> Mar  3 14:41:52 joker init: Going single user
> Mar  3 14:42:25 joker shutdown[4197]: shutting down for system reboot
> Mar  3 14:42:25 joker init: Switching to runlevel: 6
> Mar  3 14:42:26 joker syslog-ng[4191]: SIGTERM received, terminating;  
> Mar  3 14:42:26 joker syslog-ng[4191]: syslog-ng shutting down; version='2.0.0' 
> 
> And here's one with pci=noacpi (keyboard works):
> Mar  3 14:43:13 joker syslog-ng[4211]: syslog-ng starting up; version='2.0.0' 
> Mar  3 14:43:13 joker fef0000 end: 000000001fff0000 type: 1
> Mar  3 14:43:13 joker copy_e820_map() type is E820_RAM
> Mar  3 14:43:13 joker copy_e820_map() start: 000000001fff0000 size: 0000000000008000 end: 000000001fff8000 type: 3
> Mar  3 14:43:13 joker copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4
> Mar  3 14:43:13 joker copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
> Mar  3 14:43:13 joker copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
> Mar  3 14:43:13 joker copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> Mar  3 14:43:13 joker BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> Mar  3 14:43:13 joker BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> Mar  3 14:43:13 joker BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:43:13 joker BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:43:13 joker BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
> Mar  3 14:43:13 joker BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> Mar  3 14:43:13 joker BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> Mar  3 14:43:13 joker BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> Mar  3 14:43:13 joker BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> Mar  3 14:43:13 joker limit_regions start: 0000000000000000 - 000000000009fc00 (usable)
> Mar  3 14:43:13 joker limit_regions start: 000000000009fc00 - 00000000000a0000 (reserved)
> Mar  3 14:43:13 joker limit_regions start: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:43:13 joker limit_regions start: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:43:13 joker limit_regions start: 000000001fff0000 - 000000001fff8000 (ACPI data)
> Mar  3 14:43:13 joker limit_regions start: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> Mar  3 14:43:13 joker limit_regions start: 00000000fec00000 - 00000000fec01000 (reserved)
> Mar  3 14:43:13 joker limit_regions start: 00000000fee00000 - 00000000fee01000 (reserved)
> Mar  3 14:43:13 joker limit_regions start: 00000000fff80000 - 0000000100000000 (reserved)
> Mar  3 14:43:13 joker limit_regions endfor: 0000000000000000 - 000000000009fc00 (usable)
> Mar  3 14:43:13 joker limit_regions endfor: 000000000009fc00 - 00000000000a0000 (reserved)
> Mar  3 14:43:13 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:43:13 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:43:13 joker user-defined physical RAM map:
> Mar  3 14:43:13 joker user: 0000000000000000 - 000000000009fc00 (usable)
> Mar  3 14:43:13 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
> Mar  3 14:43:13 joker user: 00000000000f0000 - 0000000000100000 (reserved)
> Mar  3 14:43:13 joker user: 0000000000100000 - 000000001fff0000 (usable)
> Mar  3 14:43:13 joker 511MB LOWMEM available.
> Mar  3 14:43:13 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
> Mar  3 14:43:13 joker Zone PFN ranges:
> Mar  3 14:43:13 joker DMA             0 ->     4096
> Mar  3 14:43:13 joker Normal       4096 ->   131056
> Mar  3 14:43:13 joker early_node_map[1] active PFN ranges
> Mar  3 14:43:13 joker 0:        0 ->   131056
> Mar  3 14:43:13 joker On node 0 totalpages: 131056
> Mar  3 14:43:13 joker DMA zone: 32 pages used for memmap
> Mar  3 14:43:13 joker DMA zone: 0 pages reserved
> Mar  3 14:43:13 joker DMA zone: 4064 pages, LIFO batch:0
> Mar  3 14:43:13 joker Normal zone: 991 pages used for memmap
> Mar  3 14:43:13 joker Normal zone: 125969 pages, LIFO batch:31
> Mar  3 14:43:13 joker DMI 2.3 present.
> Mar  3 14:43:13 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
> Mar  3 14:43:13 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
> Mar  3 14:43:13 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
> Mar  3 14:43:13 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
> Mar  3 14:43:13 joker ACPI: FACS 1FFF8000, 0040
> Mar  3 14:43:13 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
> Mar  3 14:43:13 joker ACPI: PM-Timer IO Port: 0x808
> Mar  3 14:43:13 joker ACPI: Local APIC address 0xfee00000
> Mar  3 14:43:13 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Mar  3 14:43:13 joker Processor #0 6:10 APIC version 16
> Mar  3 14:43:13 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
> Mar  3 14:43:13 joker Detected 2198.080 MHz processor.
> Mar  3 14:43:13 joker Built 1 zonelists.  Total pages: 130033
> Mar  3 14:43:13 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off pci=noacpi mem=524224K
> Mar  3 14:43:13 joker Found and enabled local APIC!
> Mar  3 14:43:13 joker mapped APIC to ffffd000 (fee00000)
> Mar  3 14:43:13 joker Enabling fast FPU save and restore... done.
> Mar  3 14:43:13 joker Enabling unmasked SIMD FPU exception support... done.
> Mar  3 14:43:13 joker Initializing CPU#0
> Mar  3 14:43:13 joker CPU 0 irqstacks, hard=c0306000 soft=c0305000
> Mar  3 14:43:13 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
> Mar  3 14:43:13 joker Console: colour VGA+ 80x50
> Mar  3 14:43:13 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
> Mar  3 14:43:13 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
> Mar  3 14:43:13 joker Memory: 516036k/524224k available (1321k kernel code, 7612k reserved, 533k data, 188k init, 0k highmem)
> Mar  3 14:43:13 joker virtual kernel memory layout:
> Mar  3 14:43:13 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
> Mar  3 14:43:13 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
> Mar  3 14:43:13 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
> Mar  3 14:43:13 joker .init : 0xc02d1000 - 0xc0300000   ( 188 kB)
> Mar  3 14:43:13 joker .data : 0xc024a4cd - 0xc02cf9b4   ( 533 kB)
> Mar  3 14:43:13 joker .text : 0xc0100000 - 0xc024a4cd   (1321 kB)
> Mar  3 14:43:13 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Mar  3 14:43:13 joker Calibrating delay using timer specific routine.. 4405.91 BogoMIPS (lpj=2546144)
> Mar  3 14:43:13 joker Mount-cache hash table entries: 512
> Mar  3 14:43:13 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
> Mar  3 14:43:13 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> Mar  3 14:43:13 joker CPU: L2 Cache: 512K (64 bytes/line)
> Mar  3 14:43:13 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
> Mar  3 14:43:13 joker Intel machine check architecture supported.
> Mar  3 14:43:13 joker Intel machine check reporting enabled on CPU#0.
> Mar  3 14:43:13 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
> Mar  3 14:43:13 joker Checking 'hlt' instruction... OK.
> Mar  3 14:43:13 joker ACPI: Core revision 20070126
> Mar  3 14:43:13 joker ACPI: setting ELCR to 1e20 (from 1c20)
> Mar  3 14:43:13 joker NET: Registered protocol family 16
> Mar  3 14:43:13 joker ACPI: bus type pci registered
> Mar  3 14:43:13 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
> Mar  3 14:43:13 joker PCI: Using configuration type 1
> Mar  3 14:43:13 joker Setting up standard PCI resources
> Mar  3 14:43:13 joker ACPI: Interpreter enabled
> Mar  3 14:43:13 joker ACPI: (supports S0 S1 S3 S4 S5)
> Mar  3 14:43:13 joker ACPI: Using PIC for interrupt routing
> Mar  3 14:43:13 joker ACPI: Power Resource [URP1] (off)
> Mar  3 14:43:13 joker ACPI: Power Resource [URP2] (off)
> Mar  3 14:43:13 joker ACPI: Power Resource [FDDP] (off)
> Mar  3 14:43:13 joker ACPI: Power Resource [LPTP] (off)
> Mar  3 14:43:13 joker Linux Plug and Play Support v0.97 (c) Adam Belay
> Mar  3 14:43:13 joker pnp: PnP ACPI init
> Mar  3 14:43:13 joker pnp: PnP ACPI: found 11 devices
> Mar  3 14:43:13 joker PCI: Probing PCI hardware
> Mar  3 14:43:13 joker PCI: Probing PCI hardware (bus 00)
> Mar  3 14:43:13 joker Boot video device is 0000:01:00.0
> Mar  3 14:43:13 joker PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
> Mar  3 14:43:13 joker PCI: setting IRQ 11 as level-triggered
> Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0f.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
> Mar  3 14:43:13 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
> Mar  3 14:43:13 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
> Mar  3 14:43:13 joker PCI: Bridge: 0000:00:01.0
> Mar  3 14:43:13 joker IO window: disabled.
> Mar  3 14:43:13 joker MEM window: dde00000-dfefffff
> Mar  3 14:43:13 joker PREFETCH window: cdd00000-ddcfffff
> Mar  3 14:43:13 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
> Mar  3 14:43:13 joker NET: Registered protocol family 2
> Mar  3 14:43:13 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
> Mar  3 14:43:13 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
> Mar  3 14:43:13 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
> Mar  3 14:43:13 joker TCP: Hash tables configured (established 16384 bind 16384)
> Mar  3 14:43:13 joker TCP reno registered
> Mar  3 14:43:13 joker checking if image is initramfs... it is
> Mar  3 14:43:13 joker Freeing initrd memory: 864k freed
> Mar  3 14:43:13 joker Machine check exception polling timer started.
> Mar  3 14:43:13 joker VFS: Disk quotas dquot_6.5.1
> Mar  3 14:43:13 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Mar  3 14:43:13 joker io scheduler noop registered
> Mar  3 14:43:13 joker io scheduler anticipatory registered
> Mar  3 14:43:13 joker io scheduler deadline registered
> Mar  3 14:43:13 joker io scheduler cfq registered (default)
> Mar  3 14:43:13 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
> Mar  3 14:43:13 joker input: Power Button (FF) as /class/input/input0
> Mar  3 14:43:13 joker ACPI: Power Button (FF) [PWRF]
> Mar  3 14:43:13 joker input: Power Button (CM) as /class/input/input1
> Mar  3 14:43:13 joker ACPI: Power Button (CM) [PWRB]
> Mar  3 14:43:13 joker input: Sleep Button (CM) as /class/input/input2
> Mar  3 14:43:13 joker ACPI: Sleep Button (CM) [SLPB]
> Mar  3 14:43:13 joker isapnp: Scanning for PnP cards...
> Mar  3 14:43:13 joker isapnp: No Plug & Play device found
> Mar  3 14:43:13 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
> Mar  3 14:43:13 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Mar  3 14:43:13 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> Mar  3 14:43:13 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> Mar  3 14:43:13 joker loop: loaded (max 8 devices)
> Mar  3 14:43:13 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
> Mar  3 14:43:13 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
> Mar  3 14:43:13 joker serio: i8042 KBD port at 0x60,0x64 irq 1
> Mar  3 14:43:13 joker serio: i8042 AUX port at 0x60,0x64 irq 12
> Mar  3 14:43:13 joker mice: PS/2 mouse device common for all mice
> Mar  3 14:43:13 joker TCP cubic registered
> Mar  3 14:43:13 joker NET: Registered protocol family 1
> Mar  3 14:43:13 joker NET: Registered protocol family 17
> Mar  3 14:43:13 joker Testing NMI watchdog ... OK.
> Mar  3 14:43:13 joker Using IPI Shortcut mode
> Mar  3 14:43:13 joker Freeing unused kernel memory: 188k freed
> Mar  3 14:43:13 joker Time: tsc clocksource has been installed.
> Mar  3 14:43:13 joker SCSI subsystem initialized
> Mar  3 14:43:13 joker libata version 2.20 loaded.
> Mar  3 14:43:13 joker pata_via 0000:00:0f.1: version 0.2.1
> Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0f.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
> Mar  3 14:43:13 joker PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 11
> Mar  3 14:43:13 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
> Mar  3 14:43:13 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
> Mar  3 14:43:13 joker scsi0 : pata_via
> Mar  3 14:43:13 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
> Mar  3 14:43:13 joker ata1.00: 160086528 sectors, multi 16: LBA 
> Mar  3 14:43:13 joker ata1.00: configured for UDMA/133
> Mar  3 14:43:13 joker scsi1 : pata_via
> Mar  3 14:43:13 joker Switched to high resolution mode on CPU 0
> Mar  3 14:43:13 joker ata2.00: ATAPI, max UDMA/33
> Mar  3 14:43:13 joker ata2.01: ATAPI, max UDMA/33
> Mar  3 14:43:13 joker ata2.00: configured for UDMA/33
> Mar  3 14:43:13 joker ata2.01: configured for UDMA/33
> Mar  3 14:43:13 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
> Mar  3 14:43:13 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
> Mar  3 14:43:13 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
> Mar  3 14:43:13 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> Mar  3 14:43:13 joker sda: Write Protect is off
> Mar  3 14:43:13 joker sda: Mode Sense: 00 3a 00 00
> Mar  3 14:43:13 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Mar  3 14:43:13 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> Mar  3 14:43:13 joker sda: Write Protect is off
> Mar  3 14:43:13 joker sda: Mode Sense: 00 3a 00 00
> Mar  3 14:43:13 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> Mar  3 14:43:13 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
> Mar  3 14:43:13 joker sd 0:0:0:0: Attached scsi disk sda
> Mar  3 14:43:13 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
> Mar  3 14:43:13 joker Uniform CD-ROM driver Revision: 3.20
> Mar  3 14:43:13 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
> Mar  3 14:43:13 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
> Mar  3 14:43:13 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
> Mar  3 14:43:13 joker kjournald starting.  Commit interval 5 seconds
> Mar  3 14:43:13 joker EXT3-fs: mounted filesystem with ordered data mode.
> Mar  3 14:43:13 joker usbcore: registered new interface driver usbfs
> Mar  3 14:43:13 joker usbcore: registered new interface driver hub
> Mar  3 14:43:13 joker usbcore: registered new device driver usb
> Mar  3 14:43:13 joker PCI: setting IRQ 5 as level-triggered
> Mar  3 14:43:13 joker PCI: Found IRQ 5 for device 0000:00:0b.0
> Mar  3 14:43:13 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
> Mar  3 14:43:13 joker Real Time Clock Driver v1.12ac
> Mar  3 14:43:13 joker i2c /dev entries driver
> Mar  3 14:43:13 joker fuse init (API version 7.8)
> Mar  3 14:43:13 joker spurious 8259A interrupt: IRQ7.
> Mar  3 14:43:13 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
> Mar  3 14:43:13 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
> Mar  3 14:43:13 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
> Mar  3 14:43:13 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
> Mar  3 14:43:13 joker ieee1394: Initialized config rom entry `ip1394'
> Mar  3 14:43:13 joker input: PC Speaker as /class/input/input3
> Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:0b.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
> Mar  3 14:43:13 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
> Mar  3 14:43:13 joker PPP generic driver version 2.4.2
> Mar  3 14:43:13 joker parport: PnPBIOS parport detected.
> Mar  3 14:43:13 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> Mar  3 14:43:13 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
> Mar  3 14:43:13 joker pnp: Device 00:07 does not support disabling.
> Mar  3 14:43:13 joker rtc_cmos: probe of 00:07 failed with error -16
> Mar  3 14:43:13 joker lp0: using parport0 (interrupt-driven).
> Mar  3 14:43:13 joker ppdev: user-space parallel port driver
> Mar  3 14:43:13 joker PCI: setting IRQ 12 as level-triggered
> Mar  3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:0a.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:10.4
> Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:11.5
> Mar  3 14:43:13 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
> Mar  3 14:43:13 joker sata_via 0000:00:0f.0: version 2.1
> Mar  3 14:43:13 joker PCI: setting IRQ 10 as level-triggered
> Mar  3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:0f.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.3
> Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.2
> Mar  3 14:43:13 joker sata_via 0000:00:0f.0: routed to hard irq line 10
> Mar  3 14:43:13 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 10
> Mar  3 14:43:13 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 10
> Mar  3 14:43:13 joker scsi2 : sata_via
> Mar  3 14:43:13 joker USB Universal Host Controller Interface driver v3.0
> Mar  3 14:43:13 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> Mar  3 14:43:13 joker ATA: abnormal status 0x7F on port 0x0001e807
> Mar  3 14:43:13 joker scsi3 : sata_via
> Mar  3 14:43:13 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
> Mar  3 14:43:13 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
> Mar  3 14:43:13 joker ATA: abnormal status 0x7F on port 0x0001e007
> Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:10.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.0: irq 11, io base 0x0000c000
> Mar  3 14:43:13 joker usb usb1: configuration #1 chosen from 1 choice
> Mar  3 14:43:13 joker hub 1-0:1.0: USB hub found
> Mar  3 14:43:13 joker hub 1-0:1.0: 2 ports detected
> Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:10.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:12.0
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.1: irq 11, io base 0x0000c400
> Mar  3 14:43:13 joker usb usb2: configuration #1 chosen from 1 choice
> Mar  3 14:43:13 joker hub 2-0:1.0: USB hub found
> Mar  3 14:43:13 joker hub 2-0:1.0: 2 ports detected
> Mar  3 14:43:13 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
> Mar  3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:10.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:0f.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.3
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.2: irq 10, io base 0x0000c800
> Mar  3 14:43:13 joker usb usb3: configuration #1 chosen from 1 choice
> Mar  3 14:43:13 joker hub 3-0:1.0: USB hub found
> Mar  3 14:43:13 joker hub 3-0:1.0: 2 ports detected
> Mar  3 14:43:13 joker PCI: Found IRQ 10 for device 0000:00:10.3
> Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:0f.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 10 with 0000:00:10.2
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> Mar  3 14:43:13 joker uhci_hcd 0000:00:10.3: irq 10, io base 0x0000cc00
> Mar  3 14:43:13 joker usb usb4: configuration #1 chosen from 1 choice
> Mar  3 14:43:13 joker hub 4-0:1.0: USB hub found
> Mar  3 14:43:13 joker hub 4-0:1.0: 2 ports detected
> Mar  3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:10.4
> Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:0a.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:11.5
> Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
> Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
> Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: irq 12, io mem 0xdfff9600
> Mar  3 14:43:13 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> Mar  3 14:43:13 joker usb usb5: configuration #1 chosen from 1 choice
> Mar  3 14:43:13 joker hub 5-0:1.0: USB hub found
> Mar  3 14:43:13 joker hub 5-0:1.0: 8 ports detected
> Mar  3 14:43:13 joker input: AT Translated Set 2 keyboard as /class/input/input4
> Mar  3 14:43:13 joker PCI: Found IRQ 12 for device 0000:00:11.5
> Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:0a.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 12 with 0000:00:10.4
> Mar  3 14:43:13 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
> Mar  3 14:43:13 joker PCI: Found IRQ 11 for device 0000:00:12.0
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.1
> Mar  3 14:43:13 joker PCI: Sharing IRQ 11 with 0000:00:10.0
> Mar  3 14:43:13 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 11.
> Mar  3 14:43:13 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
> Mar  3 14:43:13 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
> Mar  3 14:43:13 joker EXT3 FS on sda2, internal journal
> Mar  3 14:43:13 joker usb 2-1: configuration #1 chosen from 1 choice
> Mar  3 14:43:13 joker usbcore: registered new interface driver hiddev
> Mar  3 14:43:13 joker input: HID 1241:1177 as /class/input/input5
> Mar  3 14:43:13 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
> Mar  3 14:43:13 joker usbcore: registered new interface driver usbhid
> Mar  3 14:43:13 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
> Mar  3 14:43:13 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
> Mar  3 14:43:13 joker init: Going single user
> Mar  3 14:43:29 joker shutdown[4217]: shutting down for system reboot
> Mar  3 14:43:29 joker init: Switching to runlevel: 6
> Mar  3 14:43:30 joker syslog-ng[4211]: SIGTERM received, terminating;  
> Mar  3 14:43:30 joker syslog-ng[4211]: syslog-ng shutting down; version='2.0.0' 
> 
> 
> I hope that's informative. Cheers.
> 
> Ash

Just checked 2.6.21-rc2-mm1, still has the problem.
Also, acpi=noirq fixes it too.
To clarify, the problem is that my ps/2 port keyboard is completely frozen
on boot - usually it gets activated when udev probes for hardware (my kernel
config is highly modular). It worked fine with 2.6.20 and earlier with acpi 
taking care of interrupt routing.

Ash

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Ash Milsted]

On Sun, 4 Mar 2007 14:23:50 +0000
Ash Milsted <thatistosayiseenem@gawab.com> wrote:

> On Sat, 3 Mar 2007 15:14:24 +0000
> Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> 
> > Hi,
> > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> > with one of the following on the command-line:
> >  - nolapic
> >  - irqfixup
> >  - pci=noacpi
> > Otherwise it gets stuck with the numlock on.
> > The following options have no effect:
> >  - nohz=off (who knows eh?)
> >  - pci=nomsi
> > 
snip
> > 
> > Ash
> 
> Just checked 2.6.21-rc2-mm1, still has the problem.
> Also, acpi=noirq fixes it too.
> To clarify, the problem is that my ps/2 port keyboard is completely frozen
> on boot - usually it gets activated when udev probes for hardware (my kernel
> config is highly modular). It worked fine with 2.6.20 and earlier with acpi 
> taking care of interrupt routing.
> 
> Ash

Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config
in case that helps. You'll see that I have swap-prefetch patched in (I
also have RDSL and some VM changes in there), but I have confirmed that
the problem occurs with no extra patches. By the way, I tested mm1 with
a rather different config (I used my distro package) and still saw the
problem.

Also, you should probably ignore that bit above where I suggest the
keyboard driver is being loaded as a module, because of course it
isn't.. Yet it does start responding (with pci=noacpi) at about that
time that udev does its thing.

Anyhoo:
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.21-beyond
# Tue Mar  6 15:07:17 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION="ash"
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SWAP_PREFETCH=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SHMEM=y
CONFIG_SLAB=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y

#
# Block layer
#
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_PARAVIRT is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
CONFIG_MK7=y
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_USE_3DNOW=y
CONFIG_X86_TSC=y
CONFIG_HPET_TIMER=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_KEXEC=y
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/hda1"

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_AC is not set
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_IBM is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# APM (Advanced Power Management) BIOS Support
#
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set

#
# PCI Hotplug Support
#
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
# CONFIG_NET_IPGRE_BROADCAST is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set

#
# IP: Virtual Server Configuration
#
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=y
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK_ENABLED=m
CONFIG_NF_CONNTRACK_SUPPORT=y
# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CONNTRACK_AMANDA=m
CONFIG_NF_CONNTRACK_FTP=m
CONFIG_NF_CONNTRACK_H323=m
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
CONFIG_NF_CONNTRACK_SANE=m
CONFIG_NF_CONNTRACK_SIP=m
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_IPRANGE=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_SAME=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
CONFIG_NF_NAT_AMANDA=m
CONFIG_NF_NAT_PPTP=m
CONFIG_NF_NAT_H323=m
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration (EXPERIMENTAL)
#
CONFIG_NF_CONNTRACK_IPV6=m
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set

#
# DCCP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_DCCP is not set

#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
CONFIG_SCTP_HMAC_SHA1=y
# CONFIG_SCTP_HMAC_MD5 is not set

#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
CONFIG_IPX=m
# CONFIG_IPX_INTERN is not set
CONFIG_ATALK=m
# CONFIG_DEV_APPLETALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
# CONFIG_IRTTY_SIR is not set

#
# Dongle support
#

#
# Old SIR device drivers
#
# CONFIG_IRPORT_SIR is not set

#
# Old Serial dongle support
#

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
# CONFIG_SIGMATEL_FIR is not set
# CONFIG_NSC_FIR is not set
# CONFIG_WINBOND_FIR is not set
# CONFIG_TOSHIBA_FIR is not set
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
CONFIG_WIRELESS_EXT=y

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set

#
# Memory Technology Devices (MTD)
#
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PARPORT_NOT_PC=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y

#
# Block devices
#
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=16384
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_BLK_DEV_INITRD=y
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set

#
# ATA/ATAPI/MFM/RLL support
#
CONFIG_IDE=m
CONFIG_BLK_DEV_IDE=m

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=m
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=m
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=m
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_PCI_AUTO is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=m
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
# CONFIG_IDE_CHIPSETS is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=m
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_PSI240I is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SEAGATE is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=m

#
# Serial ATA (prod) and Parallel ATA (experimental) drivers
#
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
CONFIG_SATA_ACPI=y
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set

#
# Old CD-ROM drivers (not SCSI, not IDE)
#
# CONFIG_CD_NO_IDESCSI is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_EXTRA_CONFIG_ROMS=y
CONFIG_IEEE1394_CONFIG_ROM_IP1394=y

#
# Device Drivers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m

#
# Macintosh device drivers
#
# CONFIG_MAC_EMUMOUSEBTN is not set

#
# Network device support
#
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
# CONFIG_NET_SB1000 is not set

#
# ARCnet devices
#
# CONFIG_ARCNET is not set

#
# PHY device support
#
# CONFIG_PHYLIB is not set

#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set

#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_DGRS is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
CONFIG_VIA_RHINE=m
CONFIG_VIA_RHINE_MMIO=y
CONFIG_VIA_RHINE_NAPI=y
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set

#
# Ethernet (1000 Mbit)
#
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set

#
# Ethernet (10000 Mbit)
#
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set

#
# Token Ring devices
#
# CONFIG_TR is not set

#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_NET_WIRELESS_RTNETLINK=y

#
# Obsolete Wireless cards support (pre-802.11)
#
# CONFIG_STRIP is not set
# CONFIG_ARLAN is not set
# CONFIG_WAVELAN is not set

#
# Wireless 802.11b ISA/PCI cards support
#
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set

#
# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support
#
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_ZD1211RW is not set
CONFIG_NET_WIRELESS=y

#
# Wan interfaces
#
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PLIP=m
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLHC=m
CONFIG_SLIP_SMART=y
# CONFIG_SLIP_MODE_SLIP6 is not set
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_RX is not set
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y

#
# ISDN subsystem
#
# CONFIG_ISDN is not set

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1280
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=960
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
# CONFIG_JOYSTICK_JOYDUMP is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_TOUCHSCREEN_ELO=m
CONFIG_TOUCHSCREEN_MTOUCH=m
CONFIG_TOUCHSCREEN_MK712=m
CONFIG_TOUCHSCREEN_PENMOUNT=m
CONFIG_TOUCHSCREEN_TOUCHRIGHT=m
CONFIG_TOUCHSCREEN_TOUCHWIN=m
CONFIG_TOUCHSCREEN_UCB1400=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_UINPUT=m

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_PARKBD=m
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
# CONFIG_TIPAR is not set

#
# IPMI
#
CONFIG_IPMI_HANDLER=m
# CONFIG_IPMI_PANIC_EVENT is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m

#
# Watchdog Cards
#
# CONFIG_WATCHDOG is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
CONFIG_NVRAM=m
CONFIG_RTC=m
CONFIG_GEN_RTC=m
CONFIG_GEN_RTC_X=y
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
# CONFIG_DRM is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set

#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_ELEKTOR is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_I810 is not set
# CONFIG_I2C_PIIX4 is not set
CONFIG_I2C_ISA=m
# CONFIG_I2C_NFORCE2 is not set
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
CONFIG_I2C_PARPORT_LIGHT=m
CONFIG_I2C_PASEMI=m
# CONFIG_I2C_PROSAVAGE is not set
# CONFIG_I2C_SAVAGE4 is not set
# CONFIG_SCx200_ACB is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_STUB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set
CONFIG_I2C_PCA_ISA=m

#
# Miscellaneous I2C Chip support
#
CONFIG_SENSORS_DS1337=m
CONFIG_SENSORS_DS1374=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
CONFIG_SENSORS_PCA9539=m
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_BUTTERFLY=m

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set

#
# Hardware Monitoring support
#
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
# CONFIG_SENSORS_SIS5595 is not set
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y

#
# Video Capture Adapters
#

#
# Video Capture Adapters
#
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_MSP3400=m
CONFIG_VIDEO_WM8775=m
CONFIG_VIDEO_SAA711X=m
CONFIG_VIDEO_CX25840=m
CONFIG_VIDEO_CX2341X=m
# CONFIG_VIDEO_VIVI is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set

#
# V4L USB devices
#
CONFIG_VIDEO_PVRUSB2=m
CONFIG_VIDEO_PVRUSB2_29XXX=y
CONFIG_VIDEO_PVRUSB2_24XXX=y
CONFIG_VIDEO_PVRUSB2_SYSFS=y
# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set
CONFIG_VIDEO_USBVISION=m

#
# Radio Adapters
#
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
CONFIG_USB_DSBR=m

#
# Digital Video Broadcasting Devices
#
# CONFIG_DVB is not set
CONFIG_VIDEO_TUNER=m
CONFIG_VIDEO_TVEEPROM=m
CONFIG_USB_DABUSB=m

#
# Graphics support
#
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_FB=m
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frambuffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
CONFIG_FB_NVIDIA_BACKLIGHT=y
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
CONFIG_FONTS=y
# CONFIG_FONT_8x8 is not set
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set

#
# Logo configuration
#
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=m
CONFIG_SND_VIA82XX_MODEM=m
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m

#
# SoC audio support
#
# CONFIG_SND_SOC is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID Devices
#
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_U132_HCD is not set
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_LIBUSUAL is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_PANTHERLORD_FF=y
CONFIG_THRUSTMASTER_FF=y
CONFIG_ZEROPLUS_FF=y
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_ACECAD=m
CONFIG_USB_KBTAB=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_TOUCHSCREEN=m
CONFIG_USB_TOUCHSCREEN_EGALAX=y
CONFIG_USB_TOUCHSCREEN_PANJIT=y
CONFIG_USB_TOUCHSCREEN_3M=y
CONFIG_USB_TOUCHSCREEN_ITM=y
CONFIG_USB_TOUCHSCREEN_ETURBO=y
CONFIG_USB_TOUCHSCREEN_GUNZE=y
CONFIG_USB_TOUCHSCREEN_DMC_TSC10=y
CONFIG_USB_YEALINK=m
CONFIG_USB_XPAD=m
CONFIG_USB_ATI_REMOTE=m
CONFIG_USB_ATI_REMOTE2=m
CONFIG_USB_KEYSPAN_REMOTE=m
CONFIG_USB_APPLETOUCH=m
CONFIG_USB_GTCO=m

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m

#
# USB Network Adapters
#
CONFIG_USB_CATC=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET_MII=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
# CONFIG_USB_ARMLINUX is not set
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_MPR=y
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_LEGOTOWER=m
CONFIG_USB_LCD=m
CONFIG_USB_BERRY_CHARGE=m
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
CONFIG_USB_CYTHERM=m
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
CONFIG_USB_TRANCEVIBRATOR=m
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set

#
# MMC/SD Card support
#
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
CONFIG_LEDS_TRIGGER_HEARTBEAT=m

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
# CONFIG_EDAC is not set

#
# Real Time Clock
#
CONFIG_RTC_LIB=m
CONFIG_RTC_CLASS=m

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=m
CONFIG_RTC_INTF_PROC=m
CONFIG_RTC_INTF_DEV=m
CONFIG_RTC_INTF_DEV_UIE_EMUL=y

#
# RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
# CONFIG_RTC_DRV_X1205 is not set
# CONFIG_RTC_DRV_DS1307 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_ISL1208 is not set
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_PCF8563 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
# CONFIG_RTC_DRV_M48T86 is not set
# CONFIG_RTC_DRV_TEST is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_V3020 is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set

#
# Virtualization
#
# CONFIG_KVM is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
# CONFIG_XFS_QUOTA is not set
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
CONFIG_OCFS2_FS=m
# CONFIG_OCFS2_DEBUG_MASKLOG is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
CONFIG_BEFS_FS=m
# CONFIG_BEFS_DEBUG is not set
CONFIG_BFS_FS=m
CONFIG_EFS_FS=m
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
CONFIG_HPFS_FS=m
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
CONFIG_KARMA_PARTITION=y
# CONFIG_EFI_PARTITION is not set

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=y

#
# Distributed Lock Manager
#
CONFIG_DLM=m
CONFIG_DLM_TCP=y
# CONFIG_DLM_SCTP is not set
# CONFIG_DLM_DEBUG is not set

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_DETECT_SOFTLOCKUP is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_FORCED_INLINING is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set

#
# Page alloc debug is incompatible with Software Suspend on i386
#
# CONFIG_DEBUG_RODATA is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=m
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_TEST=m

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set

#
# Library routines
#
CONFIG_BITREVERSE=m
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC32=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Dmitry Torokhov]

On 3/7/07, Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> On Sun, 4 Mar 2007 14:23:50 +0000
> Ash Milsted <thatistosayiseenem@gawab.com> wrote:
>
> > On Sat, 3 Mar 2007 15:14:24 +0000
> > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> >
> > > Hi,
> > > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> > > with one of the following on the command-line:
> > >  - nolapic
> > >  - irqfixup
> > >  - pci=noacpi
> > > Otherwise it gets stuck with the numlock on.
> > > The following options have no effect:
> > >  - nohz=off (who knows eh?)
> > >  - pci=nomsi
> > >
> snip
> > >
> > > Ash
> >
> > Just checked 2.6.21-rc2-mm1, still has the problem.
> > Also, acpi=noirq fixes it too.
> > To clarify, the problem is that my ps/2 port keyboard is completely frozen
> > on boot - usually it gets activated when udev probes for hardware (my kernel
> > config is highly modular). It worked fine with 2.6.20 and earlier with acpi
> > taking care of interrupt routing.
> >
> > Ash
>
> Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config
> in case that helps. You'll see that I have swap-prefetch patched in (I
> also have RDSL and some VM changes in there), but I have confirmed that
> the problem occurs with no extra patches. By the way, I tested mm1 with
> a rather different config (I used my distro package) and still saw the
> problem.
>

Your config looks fine so it must be some ACPI change that affected
IRQ routing. If IRQ's not being delievered AT keyboard probe will time
out. You said that it broke between 2.6.20 and 2.6.20-rc2.. Have you
tried -rc1?
 .
> Also, you should probably ignore that bit above where I suggest the
> keyboard driver is being loaded as a module, because of course it
> isn't.. Yet it does start responding (with pci=noacpi) at about that
> time that udev does its thing.

Tha happens because actual keyboard/mouse probing is offloaded to
kseriod thread so nothing happens untul it actually gets scheduled.

-- 
Dmitry

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Ash Milsted]

On Wed, 7 Mar 2007 12:00:04 +0000
Ash Milsted <thatistosayiseenem@gawab.com> wrote:

> On Sun, 4 Mar 2007 14:23:50 +0000
> Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> 
> > On Sat, 3 Mar 2007 15:14:24 +0000
> > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > 
> > > Hi,
> > > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> > > with one of the following on the command-line:
> > >  - nolapic
> > >  - irqfixup
> > >  - pci=noacpi
> > > Otherwise it gets stuck with the numlock on.
> > > The following options have no effect:
> > >  - nohz=off (who knows eh?)
> > >  - pci=nomsi
> > > 
> snip
> > > 
> > > Ash
> > 
> > Just checked 2.6.21-rc2-mm1, still has the problem.
> > Also, acpi=noirq fixes it too.
> > To clarify, the problem is that my ps/2 port keyboard is completely frozen
> > on boot - usually it gets activated when udev probes for hardware (my kernel
> > config is highly modular). It worked fine with 2.6.20 and earlier with acpi 
> > taking care of interrupt routing.
> > 
> > Ash
> 
> Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config
> in case that helps. You'll see that I have swap-prefetch patched in (I
> also have RDSL and some VM changes in there), but I have confirmed that
> the problem occurs with no extra patches. By the way, I tested mm1 with
> a rather different config (I used my distro package) and still saw the
> problem.
> 
> Also, you should probably ignore that bit above where I suggest the
> keyboard driver is being loaded as a module, because of course it
> isn't.. Yet it does start responding (with pci=noacpi) at about that
> time that udev does its thing.
> 
schnip

So, I tracked this down to 2.6.21-git7, the first snapshot that gives me
this problem. Tellingly it does contain an input tree merge. I would git bisect
but I don't have a local copy of the tree - I tried to get one, but it stopped
halfway through the clone, probably because I had to use http... So, I hope that
helps.

Ash

PS: I should have said I'm not subscribed, so please CC me on reply.
PPS: That almost rhymes. Almost.

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Linus Torvalds]

On Wed, 7 Mar 2007, Ash Milsted wrote:
> 
> So, I tracked this down to 2.6.21-git7, the first snapshot that gives me
> this problem.

Hmm. There is no "2.6.21-git7" (that would be the seventh nightly snapshot 
after 2.6.21 is released, which hasn't happened yet!).

Do you mean that it happens between 2.6.20-git6 and 2.6.20-git7? That 
would be git commits (the way to get them is to look at the "*.id" file 
that is associated with a snapshot):

	66efc5a7e3061c3597ac43a8bb1026488d57e66b -git6
	509cb37e173d4e39cec47238397e91b718730794 -git7

and yes, doing a

	gitk 66efc5a7..509cb37e

does show an input merge. 

> Tellingly it does contain an input tree merge. I would git bisect
> but I don't have a local copy of the tree - I tried to get one, but it stopped
> halfway through the clone, probably because I had to use http... So, I hope that
> helps.

Can you try "rsync"? It's not a great protocol in general, but it's 
perfectly fine for an initial clone..

After that, since you have already narrowed it down to a particular 
nightly snapshot, you could do the bisection startign from the known 
commits already:

	git bisect start
	git bisect good 66efc5a7	# 2.6.20-git6 was good
	git bisect bad 509cb37e		# 2.6.20-git7 was bad

and you'll have less than 500 commits to test (which is quite fast to 
bisect).

If you want to do some manual checking first (ie guessing that the 
bad behaviour came from that particular input merge), you could first try 
out commit 2a598df5, which is the head commit before of the merged input 
tree (this is all trivial to see with the above "gitk" - the SHA1's may 
sound scary and esoteric, but they're really easy to look up).

That manual check (*if* it turns out that 2a598df5 is indeed the bad one) 
would cut down the range from good to bad to just 18 commits (the range 
would be 66efc5a7..2a598df5), and then you should be able to pinpoint the 
exact bad one from just a few reboots..

(If you have to bisect all 500 commits, it would be ~10 reboots rather 
than four or five).

		Linus

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Dmitry Torokhov]

On 3/7/07, Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> On Wed, 7 Mar 2007 12:00:04 +0000
> Ash Milsted <thatistosayiseenem@gawab.com> wrote:
>
> > On Sun, 4 Mar 2007 14:23:50 +0000
> > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> >
> > > On Sat, 3 Mar 2007 15:14:24 +0000
> > > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > >
> > > > Hi,
> > > > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> > > > with one of the following on the command-line:
> > > >  - nolapic
> > > >  - irqfixup
> > > >  - pci=noacpi
> > > > Otherwise it gets stuck with the numlock on.
> > > > The following options have no effect:
> > > >  - nohz=off (who knows eh?)
> > > >  - pci=nomsi
> > > >
> > snip
> > > >
> > > > Ash
> > >
> > > Just checked 2.6.21-rc2-mm1, still has the problem.
> > > Also, acpi=noirq fixes it too.
> > > To clarify, the problem is that my ps/2 port keyboard is completely frozen
> > > on boot - usually it gets activated when udev probes for hardware (my kernel
> > > config is highly modular). It worked fine with 2.6.20 and earlier with acpi
> > > taking care of interrupt routing.
> > >
> > > Ash
> >
> > Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config
> > in case that helps. You'll see that I have swap-prefetch patched in (I
> > also have RDSL and some VM changes in there), but I have confirmed that
> > the problem occurs with no extra patches. By the way, I tested mm1 with
> > a rather different config (I used my distro package) and still saw the
> > problem.
> >
> > Also, you should probably ignore that bit above where I suggest the
> > keyboard driver is being loaded as a module, because of course it
> > isn't.. Yet it does start responding (with pci=noacpi) at about that
> > time that udev does its thing.
> >
> schnip
>
> So, I tracked this down to 2.6.21-git7, the first snapshot that gives me
> this problem. Tellingly it does contain an input tree merge. I would git bisect
> but I don't have a local copy of the tree - I tried to get one, but it stopped
> halfway through the clone, probably because I had to use http... So, I hope that
> helps.
>

Hm, that is strange... 2.6.20-rc7 has i8042 AUX IRQ delivery test fix
and fix for panic blink, both shoudl not really affect your keyboard.
Can I please get full dmesg of boot with "i8042.debug
log_buf_len=131072"?

-- 
Dmitry

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Ash Milsted]

On Wed, 7 Mar 2007 21:25:34 +0000
Ash Milsted <thatistosayiseenem@gawab.com> wrote:

> On Wed, 7 Mar 2007 12:00:04 +0000
> Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> 
> > On Sun, 4 Mar 2007 14:23:50 +0000
> > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > 
> > > On Sat, 3 Mar 2007 15:14:24 +0000
> > > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > > 
> > > > Hi,
> > > > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> > > > with one of the following on the command-line:
> > > >  - nolapic
> > > >  - irqfixup
> > > >  - pci=noacpi
> > > > Otherwise it gets stuck with the numlock on.
> > > > The following options have no effect:
> > > >  - nohz=off (who knows eh?)
> > > >  - pci=nomsi
> > > > 
> > snip
> > > > 
> > > > Ash
> > > 
> > > Just checked 2.6.21-rc2-mm1, still has the problem.
> > > Also, acpi=noirq fixes it too.
> > > To clarify, the problem is that my ps/2 port keyboard is completely frozen
> > > on boot - usually it gets activated when udev probes for hardware (my kernel
> > > config is highly modular). It worked fine with 2.6.20 and earlier with acpi 
> > > taking care of interrupt routing.
> > > 
> > > Ash
> > 
> > Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config
> > in case that helps. You'll see that I have swap-prefetch patched in (I
> > also have RDSL and some VM changes in there), but I have confirmed that
> > the problem occurs with no extra patches. By the way, I tested mm1 with
> > a rather different config (I used my distro package) and still saw the
> > problem.
> > 
> > Also, you should probably ignore that bit above where I suggest the
> > keyboard driver is being loaded as a module, because of course it
> > isn't.. Yet it does start responding (with pci=noacpi) at about that
> > time that udev does its thing.
> > 
> schnip
> 
> So, I tracked this down to 2.6.21-git7, the first snapshot that gives me
> this problem. Tellingly it does contain an input tree merge. I would git bisect
> but I don't have a local copy of the tree - I tried to get one, but it stopped
> halfway through the clone, probably because I had to use http... So, I hope that
> helps.
> 
> Ash
> 
> PS: I should have said I'm not subscribed, so please CC me on reply.
> PPS: That almost rhymes. Almost.

Apologies for only replying to my own mails, but I need to be CC'd if
any alternative is to be convenient :)

Linus, thanks for your detailed messages. I will try to get a bisect done, but 
the university firewall is likely to put up a fight against rsync as much as it
does with the git protocol. We will see. And yeah, that 2.6.21-git7 business was
a typo, should've been 2.6.20-git7, natch.

Anyway, here's the bootlog for Dmitry from a boot with broken keyboard (2.6.21-rc3):
Mar  7 23:16:41 joker syslog-ng[4349]: syslog-ng starting up; version='2.0.0' 
Mar  7 23:16:41 joker Linux version 2.6.21-beyondash (root@joker) (gcc version 4.1.2) #1 Wed Mar 7 11:39:45 GMT 2007
Mar  7 23:16:41 joker BIOS-provided physical RAM map:
Mar  7 23:16:41 joker sanitize start
Mar  7 23:16:41 joker sanitize end
Mar  7 23:16:41 joker copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
Mar  7 23:16:41 joker copy_e820_map() type is E820_RAM
Mar  7 23:16:41 joker copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
Mar  7 23:16:41 joker copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
Mar  7 23:16:41 joker copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
Mar  7 23:16:41 joker copy_e820_map() type is E820_RAM
Mar  7 23:16:41 joker copy_e820_map() start: 000000001fff0000 size: 0000000000008000 end: 000000001fff8000 type: 3
Mar  7 23:16:41 joker copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4
Mar  7 23:16:41 joker copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
Mar  7 23:16:41 joker copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
Mar  7 23:16:41 joker copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
Mar  7 23:16:41 joker BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:16:41 joker BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:16:41 joker BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:16:41 joker BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:16:41 joker BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar  7 23:16:41 joker BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar  7 23:16:41 joker BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar  7 23:16:41 joker BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar  7 23:16:41 joker BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Mar  7 23:16:41 joker limit_regions start: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:16:41 joker limit_regions start: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:16:41 joker limit_regions start: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:16:41 joker limit_regions start: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:16:41 joker limit_regions start: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar  7 23:16:41 joker limit_regions start: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar  7 23:16:41 joker limit_regions start: 00000000fec00000 - 00000000fec01000 (reserved)
Mar  7 23:16:41 joker limit_regions start: 00000000fee00000 - 00000000fee01000 (reserved)
Mar  7 23:16:41 joker limit_regions start: 00000000fff80000 - 0000000100000000 (reserved)
Mar  7 23:16:41 joker limit_regions endfor: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:16:41 joker limit_regions endfor: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:16:41 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:16:41 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:16:41 joker user-defined physical RAM map:
Mar  7 23:16:41 joker user: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:16:41 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:16:41 joker user: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:16:41 joker user: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:16:41 joker 511MB LOWMEM available.
Mar  7 23:16:41 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Mar  7 23:16:41 joker Zone PFN ranges:
Mar  7 23:16:41 joker DMA             0 ->     4096
Mar  7 23:16:41 joker Normal       4096 ->   131056
Mar  7 23:16:41 joker early_node_map[1] active PFN ranges
Mar  7 23:16:41 joker 0:        0 ->   131056
Mar  7 23:16:41 joker On node 0 totalpages: 131056
Mar  7 23:16:41 joker DMA zone: 32 pages used for memmap
Mar  7 23:16:41 joker DMA zone: 0 pages reserved
Mar  7 23:16:41 joker DMA zone: 4064 pages, LIFO batch:0
Mar  7 23:16:41 joker Normal zone: 991 pages used for memmap
Mar  7 23:16:41 joker Normal zone: 125969 pages, LIFO batch:31
Mar  7 23:16:41 joker DMI 2.3 present.
Mar  7 23:16:41 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
Mar  7 23:16:41 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
Mar  7 23:16:41 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
Mar  7 23:16:41 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
Mar  7 23:16:41 joker ACPI: FACS 1FFF8000, 0040
Mar  7 23:16:41 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
Mar  7 23:16:41 joker ACPI: PM-Timer IO Port: 0x808
Mar  7 23:16:41 joker ACPI: Local APIC address 0xfee00000
Mar  7 23:16:41 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar  7 23:16:41 joker Processor #0 6:10 APIC version 16
Mar  7 23:16:41 joker ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Mar  7 23:16:41 joker IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Mar  7 23:16:41 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Mar  7 23:16:41 joker ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Mar  7 23:16:41 joker ACPI: IRQ0 used by override.
Mar  7 23:16:41 joker ACPI: IRQ2 used by override.
Mar  7 23:16:41 joker ACPI: IRQ9 used by override.
Mar  7 23:16:41 joker Enabling APIC mode:  Flat.  Using 1 I/O APICs
Mar  7 23:16:41 joker Using ACPI (MADT) for SMP configuration information
Mar  7 23:16:41 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
Mar  7 23:16:41 joker Built 1 zonelists.  Total pages: 130033
Mar  7 23:16:41 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off i8042.debug log_buf_len=131072 mem=524224K
Mar  7 23:16:41 joker log_buf_len: 131072
Mar  7 23:16:41 joker mapped APIC to ffffd000 (fee00000)
Mar  7 23:16:41 joker mapped IOAPIC to ffffc000 (fec00000)
Mar  7 23:16:41 joker Enabling fast FPU save and restore... done.
Mar  7 23:16:41 joker Enabling unmasked SIMD FPU exception support... done.
Mar  7 23:16:41 joker Initializing CPU#0
Mar  7 23:16:41 joker CPU 0 irqstacks, hard=c0305000 soft=c0304000
Mar  7 23:16:41 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar  7 23:16:41 joker Detected 2198.078 MHz processor.
Mar  7 23:16:41 joker Console: colour VGA+ 80x50
Mar  7 23:16:41 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar  7 23:16:41 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar  7 23:16:41 joker Memory: 515908k/524224k available (1320k kernel code, 7740k reserved, 529k data, 188k init, 0k highmem)
Mar  7 23:16:41 joker virtual kernel memory layout:
Mar  7 23:16:41 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
Mar  7 23:16:41 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
Mar  7 23:16:41 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
Mar  7 23:16:41 joker .init : 0xc02d0000 - 0xc02ff000   ( 188 kB)
Mar  7 23:16:41 joker .data : 0xc024a19d - 0xc02ce994   ( 529 kB)
Mar  7 23:16:41 joker .text : 0xc0100000 - 0xc024a19d   (1320 kB)
Mar  7 23:16:41 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar  7 23:16:41 joker Calibrating delay using timer specific routine.. 4398.73 BogoMIPS (lpj=2199367)
Mar  7 23:16:41 joker Mount-cache hash table entries: 512
Mar  7 23:16:41 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar  7 23:16:41 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  7 23:16:41 joker CPU: L2 Cache: 512K (64 bytes/line)
Mar  7 23:16:41 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Mar  7 23:16:41 joker Intel machine check architecture supported.
Mar  7 23:16:41 joker Intel machine check reporting enabled on CPU#0.
Mar  7 23:16:41 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
Mar  7 23:16:41 joker Checking 'hlt' instruction... OK.
Mar  7 23:16:41 joker ACPI: Core revision 20070126
Mar  7 23:16:41 joker ENABLING IO-APIC IRQs
Mar  7 23:16:41 joker ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Mar  7 23:16:41 joker NET: Registered protocol family 16
Mar  7 23:16:41 joker ACPI: bus type pci registered
Mar  7 23:16:41 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
Mar  7 23:16:41 joker PCI: Using configuration type 1
Mar  7 23:16:41 joker Setting up standard PCI resources
Mar  7 23:16:41 joker ACPI: Interpreter enabled
Mar  7 23:16:41 joker ACPI: (supports S0 S1 S3 S4 S5)
Mar  7 23:16:41 joker ACPI: Using IOAPIC for interrupt routing
Mar  7 23:16:41 joker ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  7 23:16:41 joker PCI: Probing PCI hardware (bus 00)
Mar  7 23:16:41 joker 0000:00:0f.1: cannot adjust BAR0 (not I/O)
Mar  7 23:16:41 joker 0000:00:0f.1: cannot adjust BAR1 (not I/O)
Mar  7 23:16:41 joker 0000:00:0f.1: cannot adjust BAR2 (not I/O)
Mar  7 23:16:41 joker 0000:00:0f.1: cannot adjust BAR3 (not I/O)
Mar  7 23:16:41 joker Boot video device is 0000:01:00.0
Mar  7 23:16:41 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 *12 14 15)
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  7 23:16:41 joker ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Mar  7 23:16:41 joker ACPI: Power Resource [URP1] (off)
Mar  7 23:16:41 joker ACPI: Power Resource [URP2] (off)
Mar  7 23:16:41 joker ACPI: Power Resource [FDDP] (off)
Mar  7 23:16:41 joker ACPI: Power Resource [LPTP] (off)
Mar  7 23:16:41 joker Linux Plug and Play Support v0.97 (c) Adam Belay
Mar  7 23:16:41 joker pnp: PnP ACPI init
Mar  7 23:16:41 joker pnp: PnP ACPI: found 11 devices
Mar  7 23:16:41 joker PCI: Using ACPI for IRQ routing
Mar  7 23:16:41 joker PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
Mar  7 23:16:41 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
Mar  7 23:16:41 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
Mar  7 23:16:41 joker Time: tsc clocksource has been installed.
Mar  7 23:16:41 joker PCI: Bridge: 0000:00:01.0
Mar  7 23:16:41 joker IO window: disabled.
Mar  7 23:16:41 joker MEM window: dde00000-dfefffff
Mar  7 23:16:41 joker PREFETCH window: cdd00000-ddcfffff
Mar  7 23:16:41 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
Mar  7 23:16:41 joker NET: Registered protocol family 2
Mar  7 23:16:41 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar  7 23:16:41 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar  7 23:16:41 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar  7 23:16:41 joker TCP: Hash tables configured (established 16384 bind 16384)
Mar  7 23:16:41 joker TCP reno registered
Mar  7 23:16:41 joker checking if image is initramfs... it is
Mar  7 23:16:41 joker Freeing initrd memory: 866k freed
Mar  7 23:16:41 joker Machine check exception polling timer started.
Mar  7 23:16:41 joker VFS: Disk quotas dquot_6.5.1
Mar  7 23:16:41 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar  7 23:16:41 joker io scheduler noop registered
Mar  7 23:16:41 joker io scheduler anticipatory registered
Mar  7 23:16:41 joker io scheduler deadline registered
Mar  7 23:16:41 joker io scheduler cfq registered (default)
Mar  7 23:16:41 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
Mar  7 23:16:41 joker input: Power Button (FF) as /class/input/input0
Mar  7 23:16:41 joker ACPI: Power Button (FF) [PWRF]
Mar  7 23:16:41 joker input: Power Button (CM) as /class/input/input1
Mar  7 23:16:41 joker ACPI: Power Button (CM) [PWRB]
Mar  7 23:16:41 joker input: Sleep Button (CM) as /class/input/input2
Mar  7 23:16:41 joker ACPI: Sleep Button (CM) [SLPB]
Mar  7 23:16:41 joker isapnp: Scanning for PnP cards...
Mar  7 23:16:41 joker isapnp: No Plug & Play device found
Mar  7 23:16:41 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  7 23:16:41 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  7 23:16:41 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  7 23:16:41 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar  7 23:16:41 joker loop: loaded (max 8 devices)
Mar  7 23:16:41 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar  7 23:16:41 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 65 <- i8042 (return) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: d3 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c:      -- i8042 (auxerr) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: a9 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 00 <- i8042 (return) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: a7 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 74 <- i8042 (return) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: a8 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 20 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 54 <- i8042 (return) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: d3 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c:      -- i8042 (auxerr) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [1]
Mar  7 23:16:41 joker serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  7 23:16:41 joker serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  7 23:16:41 joker mice: PS/2 mouse device common for all mice
Mar  7 23:16:41 joker TCP cubic registered
Mar  7 23:16:41 joker NET: Registered protocol family 1
Mar  7 23:16:41 joker NET: Registered protocol family 17
Mar  7 23:16:41 joker Using IPI Shortcut mode
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [1]
Mar  7 23:16:41 joker Freeing unused kernel memory: 188k freed
Mar  7 23:16:41 joker Switched to high resolution mode on CPU 0
Mar  7 23:16:41 joker SCSI subsystem initialized
Mar  7 23:16:41 joker libata version 2.20 loaded.
Mar  7 23:16:41 joker pata_via 0000:00:0f.1: version 0.2.1
Mar  7 23:16:41 joker ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 16
Mar  7 23:16:41 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
Mar  7 23:16:41 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
Mar  7 23:16:41 joker scsi0 : pata_via
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [201]
Mar  7 23:16:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:16:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:16:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c149489c), AE_AML_OPERAND_VALUE
Mar  7 23:16:41 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
Mar  7 23:16:41 joker ata1.00: 160086528 sectors, multi 16: LBA 
Mar  7 23:16:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:16:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:16:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c149489c), AE_AML_OPERAND_VALUE
Mar  7 23:16:41 joker ata1.00: configured for UDMA/133
Mar  7 23:16:41 joker scsi1 : pata_via
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: d4 -> i8042 (command) [401]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [401]
Mar  7 23:16:41 joker drivers/input/serio/i8042.c: d4 -> i8042 (command) [601]
Mar  7 23:16:42 joker drivers/input/serio/i8042.c: ed -> i8042 (parameter) [601]
Mar  7 23:16:42 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ata2.00: ATAPI, max UDMA/33
Mar  7 23:16:42 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ata2.01: ATAPI, max UDMA/33
Mar  7 23:16:42 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ata2.00: configured for UDMA/33
Mar  7 23:16:42 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:16:42 joker ata2.01: configured for UDMA/33
Mar  7 23:16:42 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Mar  7 23:16:42 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
Mar  7 23:16:42 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
Mar  7 23:16:42 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  7 23:16:42 joker sda: Write Protect is off
Mar  7 23:16:42 joker sda: Mode Sense: 00 3a 00 00
Mar  7 23:16:42 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  7 23:16:42 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  7 23:16:42 joker sda: Write Protect is off
Mar  7 23:16:42 joker sda: Mode Sense: 00 3a 00 00
Mar  7 23:16:42 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  7 23:16:42 joker sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
Mar  7 23:16:42 joker sd 0:0:0:0: Attached scsi disk sda
Mar  7 23:16:42 joker sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Mar  7 23:16:42 joker Uniform CD-ROM driver Revision: 3.20
Mar  7 23:16:42 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar  7 23:16:42 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Mar  7 23:16:42 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
Mar  7 23:16:42 joker kjournald starting.  Commit interval 5 seconds
Mar  7 23:16:42 joker EXT3-fs: mounted filesystem with ordered data mode.
Mar  7 23:16:42 joker usbcore: registered new interface driver usbfs
Mar  7 23:16:42 joker usbcore: registered new interface driver hub
Mar  7 23:16:42 joker usbcore: registered new device driver usb
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 17
Mar  7 23:16:42 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
Mar  7 23:16:42 joker Real Time Clock Driver v1.12ac
Mar  7 23:16:42 joker i2c /dev entries driver
Mar  7 23:16:42 joker fuse init (API version 7.8)
Mar  7 23:16:42 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar  7 23:16:42 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar  7 23:16:42 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 18
Mar  7 23:16:42 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
Mar  7 23:16:42 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
Mar  7 23:16:42 joker ieee1394: Initialized config rom entry `ip1394'
Mar  7 23:16:42 joker sata_via 0000:00:0f.0: version 2.1
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 16
Mar  7 23:16:42 joker sata_via 0000:00:0f.0: routed to hard irq line 10
Mar  7 23:16:42 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 16
Mar  7 23:16:42 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 16
Mar  7 23:16:42 joker scsi2 : sata_via
Mar  7 23:16:42 joker USB Universal Host Controller Interface driver v3.0
Mar  7 23:16:42 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  7 23:16:42 joker ATA: abnormal status 0x7F on port 0x0001e807
Mar  7 23:16:42 joker scsi3 : sata_via
Mar  7 23:16:42 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
Mar  7 23:16:42 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  7 23:16:42 joker ATA: abnormal status 0x7F on port 0x0001e007
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 19
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.0: irq 19, io base 0x0000c000
Mar  7 23:16:42 joker usb usb1: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker hub 1-0:1.0: USB hub found
Mar  7 23:16:42 joker hub 1-0:1.0: 2 ports detected
Mar  7 23:16:42 joker drivers/input/serio/i8042.c: d4 -> i8042 (command) [6758]
Mar  7 23:16:42 joker drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [6758]
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 19
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.1: irq 19, io base 0x0000c400
Mar  7 23:16:42 joker usb usb2: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker hub 2-0:1.0: USB hub found
Mar  7 23:16:42 joker hub 2-0:1.0: 2 ports detected
Mar  7 23:16:42 joker PPP generic driver version 2.4.2
Mar  7 23:16:42 joker input: PC Speaker as /class/input/input3
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 19
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.2: irq 19, io base 0x0000c800
Mar  7 23:16:42 joker usb usb3: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker hub 3-0:1.0: USB hub found
Mar  7 23:16:42 joker hub 3-0:1.0: 2 ports detected
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 19
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Mar  7 23:16:42 joker uhci_hcd 0000:00:10.3: irq 19, io base 0x0000cc00
Mar  7 23:16:42 joker usb usb4: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker hub 4-0:1.0: USB hub found
Mar  7 23:16:42 joker hub 4-0:1.0: 2 ports detected
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:0b.2[B] -> GSI 16 (level, low) -> IRQ 20
Mar  7 23:16:42 joker parport: PnPBIOS parport detected.
Mar  7 23:16:42 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar  7 23:16:42 joker usb 2-1: new low speed USB device using uhci_hcd and address 2
Mar  7 23:16:42 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Mar  7 23:16:42 joker pnp: Device 00:07 does not support disabling.
Mar  7 23:16:42 joker rtc_cmos: probe of 00:07 failed with error -16
Mar  7 23:16:42 joker usb 2-1: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19
Mar  7 23:16:42 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
Mar  7 23:16:42 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
Mar  7 23:16:42 joker ehci_hcd 0000:00:10.4: irq 19, io mem 0xdfff9600
Mar  7 23:16:42 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  7 23:16:42 joker usb usb5: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker hub 5-0:1.0: USB hub found
Mar  7 23:16:42 joker hub 5-0:1.0: 8 ports detected
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 21
Mar  7 23:16:42 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 21.
Mar  7 23:16:42 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Mar  7 23:16:42 joker ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
Mar  7 23:16:42 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
Mar  7 23:16:42 joker usb 2-1: USB disconnect, address 2
Mar  7 23:16:42 joker lp0: using parport0 (interrupt-driven).
Mar  7 23:16:42 joker usbcore: registered new interface driver hiddev
Mar  7 23:16:42 joker usbcore: registered new interface driver usbhid
Mar  7 23:16:42 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  7 23:16:42 joker ppdev: user-space parallel port driver
Mar  7 23:16:42 joker usb 2-1: new low speed USB device using uhci_hcd and address 3
Mar  7 23:16:42 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
Mar  7 23:16:42 joker usb 2-1: configuration #1 chosen from 1 choice
Mar  7 23:16:42 joker input: HID 1241:1177 as /class/input/input4
Mar  7 23:16:42 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
Mar  7 23:16:42 joker EXT3 FS on sda2, internal journal
Mar  7 23:16:42 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
Mar  7 23:16:42 joker init: Going single user
--reset--

And here's one with acpi=noirq..
Mar  7 23:20:41 joker syslog-ng[4340]: syslog-ng starting up; version='2.0.0' 
Mar  7 23:20:41 joker Linux version 2.6.21-beyondash (root@joker) (gcc version 4.1.2) #1 Wed Mar 7 11:39:45 GMT 2007
Mar  7 23:20:41 joker BIOS-provided physical RAM map:
Mar  7 23:20:41 joker sanitize start
Mar  7 23:20:41 joker sanitize end
Mar  7 23:20:41 joker copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
Mar  7 23:20:41 joker copy_e820_map() type is E820_RAM
Mar  7 23:20:41 joker copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
Mar  7 23:20:41 joker copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
Mar  7 23:20:41 joker copy_e820_map() start: 0000000000100000 size: 000000001fef0000 end: 000000001fff0000 type: 1
Mar  7 23:20:41 joker copy_e820_map() type is E820_RAM
Mar  7 23:20:41 joker copy_e820_map() start: 000000001fff0000 size: 0000000000008000 end: 000000001fff8000 type: 3
Mar  7 23:20:41 joker copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4
Mar  7 23:20:41 joker copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
Mar  7 23:20:41 joker copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
Mar  7 23:20:41 joker copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
Mar  7 23:20:41 joker BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:20:41 joker BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:20:41 joker BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:20:41 joker BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:20:41 joker BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar  7 23:20:41 joker BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar  7 23:20:41 joker BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Mar  7 23:20:41 joker BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Mar  7 23:20:41 joker BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
Mar  7 23:20:41 joker limit_regions start: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:20:41 joker limit_regions start: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:20:41 joker limit_regions start: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:20:41 joker limit_regions start: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:20:41 joker limit_regions start: 000000001fff0000 - 000000001fff8000 (ACPI data)
Mar  7 23:20:41 joker limit_regions start: 000000001fff8000 - 0000000020000000 (ACPI NVS)
Mar  7 23:20:41 joker limit_regions start: 00000000fec00000 - 00000000fec01000 (reserved)
Mar  7 23:20:41 joker limit_regions start: 00000000fee00000 - 00000000fee01000 (reserved)
Mar  7 23:20:41 joker limit_regions start: 00000000fff80000 - 0000000100000000 (reserved)
Mar  7 23:20:41 joker limit_regions endfor: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:20:41 joker limit_regions endfor: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:20:41 joker limit_regions endfor: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:20:41 joker limit_regions endfor: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:20:41 joker user-defined physical RAM map:
Mar  7 23:20:41 joker user: 0000000000000000 - 000000000009fc00 (usable)
Mar  7 23:20:41 joker user: 000000000009fc00 - 00000000000a0000 (reserved)
Mar  7 23:20:41 joker user: 00000000000f0000 - 0000000000100000 (reserved)
Mar  7 23:20:41 joker user: 0000000000100000 - 000000001fff0000 (usable)
Mar  7 23:20:41 joker 511MB LOWMEM available.
Mar  7 23:20:41 joker Entering add_active_range(0, 0, 131056) 0 entries of 256 used
Mar  7 23:20:41 joker Zone PFN ranges:
Mar  7 23:20:41 joker DMA             0 ->     4096
Mar  7 23:20:41 joker Normal       4096 ->   131056
Mar  7 23:20:41 joker early_node_map[1] active PFN ranges
Mar  7 23:20:41 joker 0:        0 ->   131056
Mar  7 23:20:41 joker On node 0 totalpages: 131056
Mar  7 23:20:41 joker DMA zone: 32 pages used for memmap
Mar  7 23:20:41 joker DMA zone: 0 pages reserved
Mar  7 23:20:41 joker DMA zone: 4064 pages, LIFO batch:0
Mar  7 23:20:41 joker Normal zone: 991 pages used for memmap
Mar  7 23:20:41 joker Normal zone: 125969 pages, LIFO batch:31
Mar  7 23:20:41 joker DMI 2.3 present.
Mar  7 23:20:41 joker ACPI: RSDP 000FA8C0, 0014 (r0 AMI   )
Mar  7 23:20:41 joker ACPI: RSDT 1FFF0000, 002C (r1 AMIINT VIA_K7         10 MSFT       97)
Mar  7 23:20:41 joker ACPI: FACP 1FFF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
Mar  7 23:20:41 joker ACPI: DSDT 1FFF0120, 3502 (r1    VIA    K7VT4     1000 MSFT  100000D)
Mar  7 23:20:41 joker ACPI: FACS 1FFF8000, 0040
Mar  7 23:20:41 joker ACPI: APIC 1FFF00C0, 0054 (r1 AMIINT VIA_K7          9 MSFT       97)
Mar  7 23:20:41 joker ACPI: PM-Timer IO Port: 0x808
Mar  7 23:20:41 joker ACPI: Local APIC address 0xfee00000
Mar  7 23:20:41 joker ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Mar  7 23:20:41 joker Processor #0 6:10 APIC version 16
Mar  7 23:20:41 joker Allocating PCI resources starting at 20000000 (gap: 1fff0000:e0010000)
Mar  7 23:20:41 joker Built 1 zonelists.  Total pages: 130033
Mar  7 23:20:41 joker Kernel command line: root=/dev/disk/by-label/root vga=ext ro agp=off acpi=noirq i8042.debug log_buf_len=131072 mem=524224K
Mar  7 23:20:41 joker log_buf_len: 131072
Mar  7 23:20:41 joker Found and enabled local APIC!
Mar  7 23:20:41 joker mapped APIC to ffffd000 (fee00000)
Mar  7 23:20:41 joker Enabling fast FPU save and restore... done.
Mar  7 23:20:41 joker Enabling unmasked SIMD FPU exception support... done.
Mar  7 23:20:41 joker Initializing CPU#0
Mar  7 23:20:41 joker CPU 0 irqstacks, hard=c0305000 soft=c0304000
Mar  7 23:20:41 joker PID hash table entries: 2048 (order: 11, 8192 bytes)
Mar  7 23:20:41 joker Detected 2198.078 MHz processor.
Mar  7 23:20:41 joker Console: colour VGA+ 80x50
Mar  7 23:20:41 joker Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Mar  7 23:20:41 joker Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Mar  7 23:20:41 joker Memory: 515908k/524224k available (1320k kernel code, 7740k reserved, 529k data, 188k init, 0k highmem)
Mar  7 23:20:41 joker virtual kernel memory layout:
Mar  7 23:20:41 joker fixmap  : 0xfffb7000 - 0xfffff000   ( 288 kB)
Mar  7 23:20:41 joker vmalloc : 0xe0800000 - 0xfffb5000   ( 503 MB)
Mar  7 23:20:41 joker lowmem  : 0xc0000000 - 0xdfff0000   ( 511 MB)
Mar  7 23:20:41 joker .init : 0xc02d0000 - 0xc02ff000   ( 188 kB)
Mar  7 23:20:41 joker .data : 0xc024a19d - 0xc02ce994   ( 529 kB)
Mar  7 23:20:41 joker .text : 0xc0100000 - 0xc024a19d   (1320 kB)
Mar  7 23:20:41 joker Checking if this processor honours the WP bit even in supervisor mode... Ok.
Mar  7 23:20:41 joker Calibrating delay using timer specific routine.. 4398.73 BogoMIPS (lpj=2199367)
Mar  7 23:20:41 joker Mount-cache hash table entries: 512
Mar  7 23:20:41 joker CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
Mar  7 23:20:41 joker CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Mar  7 23:20:41 joker CPU: L2 Cache: 512K (64 bytes/line)
Mar  7 23:20:41 joker CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Mar  7 23:20:41 joker Intel machine check architecture supported.
Mar  7 23:20:41 joker Intel machine check reporting enabled on CPU#0.
Mar  7 23:20:41 joker CPU: AMD Athlon(tm) XP 3200+ stepping 00
Mar  7 23:20:41 joker Checking 'hlt' instruction... OK.
Mar  7 23:20:41 joker ACPI: Core revision 20070126
Mar  7 23:20:41 joker ACPI: setting ELCR to 1e20 (from 1c20)
Mar  7 23:20:41 joker NET: Registered protocol family 16
Mar  7 23:20:41 joker ACPI: bus type pci registered
Mar  7 23:20:41 joker PCI: PCI BIOS revision 2.10 entry at 0xfda71, last bus=1
Mar  7 23:20:41 joker PCI: Using configuration type 1
Mar  7 23:20:41 joker Setting up standard PCI resources
Mar  7 23:20:41 joker ACPI: Interpreter enabled
Mar  7 23:20:41 joker ACPI: (supports S0 S1 S3 S4 S5)
Mar  7 23:20:41 joker ACPI: Using PIC for interrupt routing
Mar  7 23:20:41 joker ACPI: PCI Root Bridge [PCI0] (0000:00)
Mar  7 23:20:41 joker PCI: Probing PCI hardware (bus 00)
Mar  7 23:20:41 joker 0000:00:0f.1: cannot adjust BAR0 (not I/O)
Mar  7 23:20:41 joker 0000:00:0f.1: cannot adjust BAR1 (not I/O)
Mar  7 23:20:41 joker 0000:00:0f.1: cannot adjust BAR2 (not I/O)
Mar  7 23:20:41 joker 0000:00:0f.1: cannot adjust BAR3 (not I/O)
Mar  7 23:20:41 joker Boot video device is 0000:01:00.0
Mar  7 23:20:41 joker ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Mar  7 23:20:41 joker ACPI: Power Resource [URP1] (off)
Mar  7 23:20:41 joker ACPI: Power Resource [URP2] (off)
Mar  7 23:20:41 joker ACPI: Power Resource [FDDP] (off)
Mar  7 23:20:41 joker ACPI: Power Resource [LPTP] (off)
Mar  7 23:20:41 joker Linux Plug and Play Support v0.97 (c) Adam Belay
Mar  7 23:20:41 joker pnp: PnP ACPI init
Mar  7 23:20:41 joker pnp: PnP ACPI: found 11 devices
Mar  7 23:20:41 joker PCI: Probing PCI hardware
Mar  7 23:20:41 joker pci 0000:00:01.0: Error creating sysfs bridge symlink, continuing...
Mar  7 23:20:41 joker PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0
Mar  7 23:20:41 joker PCI: setting IRQ 11 as level-triggered
Mar  7 23:20:41 joker PCI: Found IRQ 11 for device 0000:00:0f.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  7 23:20:41 joker pnp: 00:05: iomem range 0xfec00000-0xfec00fff has been reserved
Mar  7 23:20:41 joker pnp: 00:05: iomem range 0xfee00000-0xfee00fff has been reserved
Mar  7 23:20:41 joker Time: tsc clocksource has been installed.
Mar  7 23:20:41 joker PCI: Bridge: 0000:00:01.0
Mar  7 23:20:41 joker IO window: disabled.
Mar  7 23:20:41 joker MEM window: dde00000-dfefffff
Mar  7 23:20:41 joker PREFETCH window: cdd00000-ddcfffff
Mar  7 23:20:41 joker PCI: Setting latency timer of device 0000:00:01.0 to 64
Mar  7 23:20:41 joker NET: Registered protocol family 2
Mar  7 23:20:41 joker IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
Mar  7 23:20:41 joker TCP established hash table entries: 16384 (order: 5, 131072 bytes)
Mar  7 23:20:41 joker TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
Mar  7 23:20:41 joker TCP: Hash tables configured (established 16384 bind 16384)
Mar  7 23:20:41 joker TCP reno registered
Mar  7 23:20:41 joker checking if image is initramfs... it is
Mar  7 23:20:41 joker Freeing initrd memory: 866k freed
Mar  7 23:20:41 joker Machine check exception polling timer started.
Mar  7 23:20:41 joker VFS: Disk quotas dquot_6.5.1
Mar  7 23:20:41 joker Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Mar  7 23:20:41 joker io scheduler noop registered
Mar  7 23:20:41 joker io scheduler anticipatory registered
Mar  7 23:20:41 joker io scheduler deadline registered
Mar  7 23:20:41 joker io scheduler cfq registered (default)
Mar  7 23:20:41 joker PCI: Bypassing VIA 8237 APIC De-Assert Message
Mar  7 23:20:41 joker input: Power Button (FF) as /class/input/input0
Mar  7 23:20:41 joker ACPI: Power Button (FF) [PWRF]
Mar  7 23:20:41 joker input: Power Button (CM) as /class/input/input1
Mar  7 23:20:41 joker ACPI: Power Button (CM) [PWRB]
Mar  7 23:20:41 joker input: Sleep Button (CM) as /class/input/input2
Mar  7 23:20:41 joker ACPI: Sleep Button (CM) [SLPB]
Mar  7 23:20:41 joker isapnp: Scanning for PnP cards...
Mar  7 23:20:41 joker isapnp: No Plug & Play device found
Mar  7 23:20:41 joker Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
Mar  7 23:20:41 joker serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  7 23:20:41 joker 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Mar  7 23:20:41 joker RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Mar  7 23:20:41 joker loop: loaded (max 8 devices)
Mar  7 23:20:41 joker PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
Mar  7 23:20:41 joker PNP: PS/2 controller doesn't have AUX irq; using default 12
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 65 <- i8042 (return) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: d3 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 5a -> i8042 (parameter) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c:      -- i8042 (auxerr) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: a9 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 00 <- i8042 (return) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: a7 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 74 <- i8042 (return) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: a8 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 20 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 54 <- i8042 (return) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 74 -> i8042 (parameter) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: d3 -> i8042 (command) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f0 -> i8042 (parameter) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c:      -- i8042 (auxerr) [0]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 56 -> i8042 (parameter) [1]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 60 -> i8042 (command) [1]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 47 -> i8042 (parameter) [1]
Mar  7 23:20:41 joker serio: i8042 KBD port at 0x60,0x64 irq 1
Mar  7 23:20:41 joker serio: i8042 AUX port at 0x60,0x64 irq 12
Mar  7 23:20:41 joker mice: PS/2 mouse device common for all mice
Mar  7 23:20:41 joker TCP cubic registered
Mar  7 23:20:41 joker NET: Registered protocol family 1
Mar  7 23:20:41 joker NET: Registered protocol family 17
Mar  7 23:20:41 joker Using IPI Shortcut mode
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [1]
Mar  7 23:20:41 joker Freeing unused kernel memory: 188k freed
Mar  7 23:20:41 joker Switched to high resolution mode on CPU 0
Mar  7 23:20:41 joker SCSI subsystem initialized
Mar  7 23:20:41 joker libata version 2.20 loaded.
Mar  7 23:20:41 joker pata_via 0000:00:0f.1: version 0.2.1
Mar  7 23:20:41 joker PCI: Found IRQ 11 for device 0000:00:0f.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  7 23:20:41 joker PCI: VIA VLink IRQ fixup for 0000:00:0f.1, from 255 to 11
Mar  7 23:20:41 joker ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
Mar  7 23:20:41 joker ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
Mar  7 23:20:41 joker scsi0 : pata_via
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [201]
Mar  7 23:20:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c149489c), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ata1.00: ATA-7: Maxtor 6Y080L0, YAR41BW0, max UDMA/133
Mar  7 23:20:41 joker ata1.00: 160086528 sectors, multi 16: LBA 
Mar  7 23:20:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN0.DRV0._GTF] (Node c149489c), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ata1.00: configured for UDMA/133
Mar  7 23:20:41 joker scsi1 : pata_via
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: d4 -> i8042 (command) [401]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [401]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: d4 -> i8042 (command) [601]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: ed -> i8042 (parameter) [601]
Mar  7 23:20:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ata2.00: ATAPI, max UDMA/33
Mar  7 23:20:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ata2.01: ATAPI, max UDMA/33
Mar  7 23:20:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ata2.00: configured for UDMA/33
Mar  7 23:20:41 joker ACPI Error (dsopcode-0481): Attempt to CreateField of length zero [20070126]
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.RATA] (Node c1494f04), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.IDE0.CHN1.DRV0._GTF] (Node c14947d4), AE_AML_OPERAND_VALUE
Mar  7 23:20:41 joker ata2.01: configured for UDMA/33
Mar  7 23:20:41 joker scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080L0   YAR4 PQ: 0 ANSI: 5
Mar  7 23:20:41 joker scsi 1:0:0:0: CD-ROM            HL-DT-ST CD-RW GCE-8526B  1.03 PQ: 0 ANSI: 5
Mar  7 23:20:41 joker scsi 1:0:1:0: CD-ROM            LITE-ON  DVD SOHD-167T    9S19 PQ: 0 ANSI: 5
Mar  7 23:20:41 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  7 23:20:41 joker sda: Write Protect is off
Mar  7 23:20:41 joker sda: Mode Sense: 00 3a 00 00
Mar  7 23:20:41 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  7 23:20:41 joker SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
Mar  7 23:20:41 joker sda: Write Protect is off
Mar  7 23:20:41 joker sda: Mode Sense: 00 3a 00 00
Mar  7 23:20:41 joker SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Mar  7 23:20:41 joker sda:sr0: scsi3-mmc drive: 52x/52x writer cd/rw xa/form2 cdda tray
Mar  7 23:20:41 joker Uniform CD-ROM driver Revision: 3.20
Mar  7 23:20:41 joker sr 1:0:0:0: Attached scsi CD-ROM sr0
Mar  7 23:20:41 joker sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray
Mar  7 23:20:41 joker sr 1:0:1:0: Attached scsi CD-ROM sr1
Mar  7 23:20:41 joker sda1 sda2 sda3 sda4 < sda5 sda6 >
Mar  7 23:20:41 joker sd 0:0:0:0: Attached scsi disk sda
Mar  7 23:20:41 joker kjournald starting.  Commit interval 5 seconds
Mar  7 23:20:41 joker EXT3-fs: mounted filesystem with ordered data mode.
Mar  7 23:20:41 joker usbcore: registered new interface driver usbfs
Mar  7 23:20:41 joker usbcore: registered new interface driver hub
Mar  7 23:20:41 joker usbcore: registered new device driver usb
Mar  7 23:20:41 joker PCI: setting IRQ 5 as level-triggered
Mar  7 23:20:41 joker PCI: Found IRQ 5 for device 0000:00:0b.0
Mar  7 23:20:41 joker Installing spdif_bug patch: Audigy 2 Platinum [SB0240P]
Mar  7 23:20:41 joker Real Time Clock Driver v1.12ac
Mar  7 23:20:41 joker i2c /dev entries driver
Mar  7 23:20:41 joker fuse init (API version 7.8)
Mar  7 23:20:41 joker sd 0:0:0:0: Attached scsi generic sg0 type 0
Mar  7 23:20:41 joker sr 1:0:0:0: Attached scsi generic sg1 type 5
Mar  7 23:20:41 joker sr 1:0:1:0: Attached scsi generic sg2 type 5
Mar  7 23:20:41 joker PCI: setting IRQ 12 as level-triggered
Mar  7 23:20:41 joker PCI: Found IRQ 12 for device 0000:00:0a.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 12 with 0000:00:10.4
Mar  7 23:20:41 joker PCI: Sharing IRQ 12 with 0000:00:11.5
Mar  7 23:20:41 joker rt2500 1.1.0 CVS CVS http://rt2x00.serialmonkey.com
Mar  7 23:20:41 joker gameport: EMU10K1 is pci0000:00:0b.1/gameport0, io 0xec00, speed 1217kHz
Mar  7 23:20:41 joker USB Universal Host Controller Interface driver v3.0
Mar  7 23:20:41 joker PCI: Found IRQ 11 for device 0000:00:10.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.0: UHCI Host Controller
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.0: irq 11, io base 0x0000c000
Mar  7 23:20:41 joker usb usb1: configuration #1 chosen from 1 choice
Mar  7 23:20:41 joker hub 1-0:1.0: USB hub found
Mar  7 23:20:41 joker hub 1-0:1.0: 2 ports detected
Mar  7 23:20:41 joker sata_via 0000:00:0f.0: version 2.1
Mar  7 23:20:41 joker PCI: setting IRQ 10 as level-triggered
Mar  7 23:20:41 joker PCI: Found IRQ 10 for device 0000:00:0f.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 10 with 0000:00:10.3
Mar  7 23:20:41 joker PCI: Sharing IRQ 10 with 0000:00:10.2
Mar  7 23:20:41 joker sata_via 0000:00:0f.0: routed to hard irq line 10
Mar  7 23:20:41 joker ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 10
Mar  7 23:20:41 joker ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 10
Mar  7 23:20:41 joker scsi2 : sata_via
Mar  7 23:20:41 joker ieee1394: Initialized config rom entry `ip1394'
Mar  7 23:20:41 joker input: PC Speaker as /class/input/input3
Mar  7 23:20:41 joker via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
Mar  7 23:20:41 joker ata3: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  7 23:20:41 joker ATA: abnormal status 0x7F on port 0x0001e807
Mar  7 23:20:41 joker scsi3 : sata_via
Mar  7 23:20:41 joker ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
Mar  7 23:20:41 joker ATA: abnormal status 0x7F on port 0x0001e007
Mar  7 23:20:41 joker PCI: Found IRQ 12 for device 0000:00:10.4
Mar  7 23:20:41 joker PCI: Sharing IRQ 12 with 0000:00:0a.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 12 with 0000:00:11.5
Mar  7 23:20:41 joker ehci_hcd 0000:00:10.4: EHCI Host Controller
Mar  7 23:20:41 joker ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 2
Mar  7 23:20:41 joker ehci_hcd 0000:00:10.4: irq 12, io mem 0xdfff9600
Mar  7 23:20:41 joker ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 12) [7050]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f2 -> i8042 (kbd-data) [7050]
Mar  7 23:20:41 joker usb usb2: configuration #1 chosen from 1 choice
Mar  7 23:20:41 joker hub 2-0:1.0: USB hub found
Mar  7 23:20:41 joker hub 2-0:1.0: 8 ports detected
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7052]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [7053]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [7053]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: ed -> i8042 (kbd-data) [7053]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7055]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [7055]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7057]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f3 -> i8042 (kbd-data) [7057]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7059]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 00 -> i8042 (kbd-data) [7059]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7061]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f4 -> i8042 (kbd-data) [7061]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7063]
Mar  7 23:20:41 joker input: AT Translated Set 2 keyboard as /class/input/input4
Mar  7 23:20:41 joker PCI: Found IRQ 11 for device 0000:00:10.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.1: UHCI Host Controller
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.1: irq 11, io base 0x0000c400
Mar  7 23:20:41 joker usb usb3: configuration #1 chosen from 1 choice
Mar  7 23:20:41 joker hub 3-0:1.0: USB hub found
Mar  7 23:20:41 joker hub 3-0:1.0: 2 ports detected
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: d4 -> i8042 (command) [7194]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: f2 -> i8042 (parameter) [7194]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: fa <- i8042 (interrupt, 0, 1) [7196]
Mar  7 23:20:41 joker atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: ab <- i8042 (interrupt, 0, 1) [7196]
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: 41 <- i8042 (interrupt, 0, 1) [7197]
Mar  7 23:20:41 joker PPP generic driver version 2.4.2
Mar  7 23:20:41 joker parport: PnPBIOS parport detected.
Mar  7 23:20:41 joker parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
Mar  7 23:20:41 joker PCI: Found IRQ 10 for device 0000:00:10.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 10 with 0000:00:0f.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 10 with 0000:00:10.3
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.2: UHCI Host Controller
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 4
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.2: irq 10, io base 0x0000c800
Mar  7 23:20:41 joker usb usb4: configuration #1 chosen from 1 choice
Mar  7 23:20:41 joker hub 4-0:1.0: USB hub found
Mar  7 23:20:41 joker hub 4-0:1.0: 2 ports detected
Mar  7 23:20:41 joker drivers/input/serio/i8042.c: Interrupt 12, without any data [7255]
Mar  7 23:20:41 joker PCI: Found IRQ 10 for device 0000:00:10.3
Mar  7 23:20:41 joker PCI: Sharing IRQ 10 with 0000:00:0f.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 10 with 0000:00:10.2
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.3: UHCI Host Controller
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 5
Mar  7 23:20:41 joker uhci_hcd 0000:00:10.3: irq 10, io base 0x0000cc00
Mar  7 23:20:41 joker usb usb5: configuration #1 chosen from 1 choice
Mar  7 23:20:41 joker hub 5-0:1.0: USB hub found
Mar  7 23:20:41 joker hub 5-0:1.0: 2 ports detected
Mar  7 23:20:41 joker rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
Mar  7 23:20:41 joker pnp: Device 00:07 does not support disabling.
Mar  7 23:20:41 joker rtc_cmos: probe of 00:07 failed with error -16
Mar  7 23:20:41 joker PCI: Found IRQ 11 for device 0000:00:12.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0b.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  7 23:20:41 joker eth0: VIA Rhine II at 0xdfff9500, 00:0b:6a:99:27:12, IRQ 11.
Mar  7 23:20:41 joker eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 0021.
Mar  7 23:20:41 joker PCI: Found IRQ 11 for device 0000:00:0b.2
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:0f.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.1
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:10.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 11 with 0000:00:12.0
Mar  7 23:20:41 joker usb 3-1: new low speed USB device using uhci_hcd and address 2
Mar  7 23:20:41 joker ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[dfff9800-dfff9fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
Mar  7 23:20:41 joker PCI: Found IRQ 12 for device 0000:00:11.5
Mar  7 23:20:41 joker PCI: Sharing IRQ 12 with 0000:00:0a.0
Mar  7 23:20:41 joker PCI: Sharing IRQ 12 with 0000:00:10.4
Mar  7 23:20:41 joker PCI: Setting latency timer of device 0000:00:11.5 to 64
Mar  7 23:20:41 joker usb 3-1: configuration #1 chosen from 1 choice
Mar  7 23:20:41 joker lp0: using parport0 (interrupt-driven).
Mar  7 23:20:41 joker ppdev: user-space parallel port driver
Mar  7 23:20:41 joker usbcore: registered new interface driver hiddev
Mar  7 23:20:41 joker input: HID 1241:1177 as /class/input/input5
Mar  7 23:20:41 joker input: USB HID v1.00 Mouse [HID 1241:1177] on usb-0000:00:10.1-1
Mar  7 23:20:41 joker usbcore: registered new interface driver usbhid
Mar  7 23:20:41 joker drivers/usb/input/hid-core.c: v2.6:USB HID core driver
Mar  7 23:20:41 joker ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00023c00910047b3]
Mar  7 23:20:41 joker EXT3 FS on sda2, internal journal
Mar  7 23:20:41 joker Adding 1534168k swap on /dev/disk/by-label/swap.  Priority:-1 extents:1 across:1534168k
Mar  7 23:20:42 joker init: Going single user
Mar  7 23:20:44 joker drivers/input/serio/i8042.c: 36 <- i8042 (interrupt, 0, 1) [14807]
Mar  7 23:20:44 joker drivers/input/serio/i8042.c: 06 <- i8042 (interrupt, 0, 1) [14894]
Mar  7 23:20:44 joker drivers/input/serio/i8042.c: 86 <- i8042 (interrupt, 0, 1) [15004]
Mar  7 23:20:44 joker drivers/input/serio/i8042.c: b6 <- i8042 (interrupt, 0, 1) [15058]
Mar  7 23:20:44 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [15203]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [15375]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [15398]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [15421]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [15444]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [15467]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 1e <- i8042 (interrupt, 0, 1) [15486]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [15579]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 9e <- i8042 (interrupt, 0, 1) [15614]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [15667]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 12 <- i8042 (interrupt, 0, 1) [15753]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [15765]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 92 <- i8042 (interrupt, 0, 1) [15833]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 19 <- i8042 (interrupt, 0, 1) [15876]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 23 <- i8042 (interrupt, 0, 1) [15965]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 99 <- i8042 (interrupt, 0, 1) [15973]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: a3 <- i8042 (interrupt, 0, 1) [16040]
Mar  7 23:20:45 joker drivers/input/serio/i8042.c: 2a <- i8042 (interrupt, 0, 1) [16153]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 31 <- i8042 (interrupt, 0, 1) [16263]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: aa <- i8042 (interrupt, 0, 1) [16302]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: b1 <- i8042 (interrupt, 0, 1) [16358]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 16 <- i8042 (interrupt, 0, 1) [16463]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 96 <- i8042 (interrupt, 0, 1) [16541]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [16573]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [16632]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 26 <- i8042 (interrupt, 0, 1) [16712]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 0b <- i8042 (interrupt, 0, 1) [16780]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: a6 <- i8042 (interrupt, 0, 1) [16821]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 8b <- i8042 (interrupt, 0, 1) [16873]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 1c <- i8042 (interrupt, 0, 1) [16886]
Mar  7 23:20:46 joker drivers/input/serio/i8042.c: 9c <- i8042 (interrupt, 0, 1) [16989]
etc etc

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Linus Torvalds]

On Wed, 7 Mar 2007, Ash Milsted wrote:
> 
> Anyway, here's the bootlog for Dmitry from a boot with broken keyboard (2.6.21-rc3):

The non-working setup doesn't get any interrupts back, and thus doesn't 
see the ACK for the "\xd4\xed" command.

It really looks interrupt-related (especially considering that it goes 
away when you ask ACPI to not do certain things), but at the same time, 
the differences between -git6 and -git7 really don't seem to have *any* 
ACPI or PCI irq routing changes, so I think this really is related to the 
input-layer, and perhaps the real difference between ACPI irq routing and 
not is just the timing or IO acecss patterns that you get when you use the 
local apic vs the i8259 legacy irq controller.

For example, if there is a edge-triggered interrupt involved (and both 
keyboard *and* mouse are edge-triggered), the io-apic and the i8259 work 
differently: temporarily disabling the interrupt will reset the edge 
trigger logic on the i8259, but not on an IO-APIC.

So the lack of interrupts could be due to the input layer not clearing the 
interrupt source during setup, so some *old* interrupt just stays around, 
and because it's always set, on an IO-APIC it will never show as an edge 
at all - but on the i8259 the very action of registering the irq routine 
will create an edge.

There's some reason to believe that you may have a pending interrupt 
waiting: for the working case, you actually have:

> Mar  7 23:20:41 joker atkbd.c: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly.

so there was certainly *something* unexpected there.

I'm not saying that's it, but it could explain why something that looks 
interrupt-related and that changes depending on whether you use ACPI to 
set up interrupts or not can have these kinds of reasons, that just depend 
on which interrupt controller the kernel happens to use, even though it's 
not "really" about lost interrupts at all, but just a driver that doesn't 
acknowledge a pending one.

Or something.

Doing the git bisect would really help.

		Linus

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Dmitry Torokhov]

On Wednesday 07 March 2007 16:50, Dmitry Torokhov wrote:
> On 3/7/07, Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> >
> > So, I tracked this down to 2.6.21-git7, the first snapshot that gives me
> > this problem. Tellingly it does contain an input tree merge. I would git bisect
> > but I don't have a local copy of the tree - I tried to get one, but it stopped
> > halfway through the clone, probably because I had to use http... So, I hope that
> > helps.
> >
> 
> Hm, that is strange... 2.6.20-rc7 has i8042 AUX IRQ delivery test fix
> and fix for panic blink, both shoudl not really affect your keyboard.
> Can I please get full dmesg of boot with "i8042.debug
> log_buf_len=131072"?
> 

Argh, I can't believe I forgot to get this into my tree. Could you please
tell me if the patch below fixes ytour issue?

-- 
Dmitry

Input: i8042 - another attempt to fix AUX delivery checks

Do not assume that AUX_LOOP command is broken unless it
completes successfully but returns wrong (unexpected) data.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/serio/i8042.c |   10 ++++++++--
 1 file changed, 8 insertions(+), 2 deletions(-)

Index: linux/drivers/input/serio/i8042.c
===================================================================
--- linux.orig/drivers/input/serio/i8042.c
+++ linux/drivers/input/serio/i8042.c
@@ -553,7 +553,8 @@ static int __devinit i8042_check_aux(voi
  */
 
 	param = 0x5a;
-	if (i8042_command(&param, I8042_CMD_AUX_LOOP) || param != 0x5a) {
+	retval = i8042_command(&param, I8042_CMD_AUX_LOOP);
+	if (retval || param != 0x5a) {
 
 /*
  * External connection test - filters out AT-soldered PS/2 i8042's
@@ -567,7 +568,12 @@ static int __devinit i8042_check_aux(voi
 		    (param && param != 0xfa && param != 0xff))
 			return -1;
 
-		aux_loop_broken = 1;
+/*
+ * If AUX_LOOP completed without error but returned unexpected data
+ * mark it as broken
+ */
+		if (!retval)
+			aux_loop_broken = 1;
 	}
 
 /*

Re: 2.6.21-rc2 regression vs. 2.6.20: AT keyboard only works with pci=noacpi

[Ash Milsted]

On Wed, 7 Mar 2007 23:49:14 +0000
Ash Milsted <thatistosayiseenem@gawab.com> wrote:

> On Wed, 7 Mar 2007 21:25:34 +0000
> Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> 
> > On Wed, 7 Mar 2007 12:00:04 +0000
> > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > 
> > > On Sun, 4 Mar 2007 14:23:50 +0000
> > > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > > 
> > > > On Sat, 3 Mar 2007 15:14:24 +0000
> > > > Ash Milsted <thatistosayiseenem@gawab.com> wrote:
> > > > 
> > > > > Hi,
> > > > > With 2.6.21-rc2-git1 I have a problem with my ps/2 port keyboard - it only works
> > > > > with one of the following on the command-line:
> > > > >  - nolapic
> > > > >  - irqfixup
> > > > >  - pci=noacpi
> > > > > Otherwise it gets stuck with the numlock on.
> > > > > The following options have no effect:
> > > > >  - nohz=off (who knows eh?)
> > > > >  - pci=nomsi
> > > > > 
> > > snip
> > > > > 
> > > > > Ash
> > > > 
> > > > Just checked 2.6.21-rc2-mm1, still has the problem.
> > > > Also, acpi=noirq fixes it too.
> > > > To clarify, the problem is that my ps/2 port keyboard is completely frozen
> > > > on boot - usually it gets activated when udev probes for hardware (my kernel
> > > > config is highly modular). It worked fine with 2.6.20 and earlier with acpi 
> > > > taking care of interrupt routing.
> > > > 
> > > > Ash
> > > 
> > > Any thoughts on this? It still occurs with 2.6.21-rc3. Here's my config
> > > in case that helps. You'll see that I have swap-prefetch patched in (I
> > > also have RDSL and some VM changes in there), but I have confirmed that
> > > the problem occurs with no extra patches. By the way, I tested mm1 with
> > > a rather different config (I used my distro package) and still saw the
> > > problem.
> > > 
> > > Also, you should probably ignore that bit above where I suggest the
> > > keyboard driver is being loaded as a module, because of course it
> > > isn't.. Yet it does start responding (with pci=noacpi) at about that
> > > time that udev does its thing.
> > > 
> > schnip
> > 
> > So, I tracked this down to 2.6.21-git7, the first snapshot that gives me
> > this problem. Tellingly it does contain an input tree merge. I would git bisect
> > but I don't have a local copy of the tree - I tried to get one, but it stopped
> > halfway through the clone, probably because I had to use http... So, I hope that
> > helps.
> > 
> > Ash
> > 
> > PS: I should have said I'm not subscribed, so please CC me on reply.
> > PPS: That almost rhymes. Almost.
> 
> Apologies for only replying to my own mails, but I need to be CC'd if
> any alternative is to be convenient :)
> 
> Linus, thanks for your detailed messages. I will try to get a bisect done, but 
> the university firewall is likely to put up a fight against rsync as much as it
> does with the git protocol. We will see. And yeah, that 2.6.21-git7 business was
> a typo, should've been 2.6.20-git7, natch.
> 
ker-cut

>Argh, I can't believe I forgot to get this into my tree. Could you
>please tell me if the patch below fixes ytour issue?

Yup, that patch really hit the spot. Now I don't have to bisect :)

Thanks for your help (both of you),

Ash