[PATCH] rtc-cmos: make it load on PNPBIOS systems

[PATCH] rtc-cmos: make it load on PNPBIOS systems

[Marko Vrh]

Replace CONFIG_PNPACPI with CONFIG_PNP, so it loads on
ACPI-less PNPBIOS systems.

Signed-off-by: Marko Vrh <mvrh@freeshells.ch>

----

diff -urNp linux-2.6.21/drivers/rtc/rtc-cmos.c linux-2.6.21.new/drivers/rtc/rtc-cmos.c
--- linux-2.6.21/drivers/rtc/rtc-cmos.c	2007-04-26 05:08:32.000000000 +0200
+++ linux-2.6.21.new/drivers/rtc/rtc-cmos.c	2007-04-26 23:58:36.000000000 +0200
@@ -379,12 +379,12 @@ static irqreturn_t cmos_interrupt(int ir
  		return IRQ_NONE;
  }

-#ifdef	CONFIG_PNPACPI
-#define	is_pnpacpi()	1
+#ifdef	CONFIG_PNP
+#define	is_pnp()	1
  #define	INITSECTION

  #else
-#define	is_pnpacpi()	0
+#define	is_pnp()	0
  #define	INITSECTION	__init
  #endif

@@ -427,7 +427,7 @@ cmos_do_probe(struct device *dev, struct
  	 * REVISIT for non-x86 systems we may need to handle io memory
  	 * resources: ioremap them, and request_mem_region().
  	 */
-	if (is_pnpacpi()) {
+	if (is_pnp()) {
  		retval = request_resource(&ioport_resource, ports);
  		if (retval < 0) {
  			dev_dbg(dev, "i/o registers already in use\n");
@@ -520,7 +520,7 @@ static void __exit cmos_do_remove(struct

  	cmos_do_shutdown();

-	if (is_pnpacpi())
+	if (is_pnp())
  		release_resource(cmos->iomem);
  	rename_region(cmos->iomem, NULL);

@@ -613,7 +613,7 @@ static int cmos_resume(struct device *de
   * the device node will always be created as a PNPACPI device.
   */

-#ifdef	CONFIG_PNPACPI
+#ifdef	CONFIG_PNP

  #include <linux/pnp.h>

@@ -684,11 +684,11 @@ static void __exit cmos_exit(void)
  }
  module_exit(cmos_exit);

-#else	/* no PNPACPI */
+#else	/* no PNP */

  /*----------------------------------------------------------------*/

-/* Platform setup should have set up an RTC device, when PNPACPI is
+/* Platform setup should have set up an RTC device, when PNP is
   * unavailable ... this could happen even on (older) PCs.
   */

@@ -734,7 +734,7 @@ static void __exit cmos_exit(void)
  module_exit(cmos_exit);


-#endif	/* !PNPACPI */
+#endif	/* !PNP */

  MODULE_AUTHOR("David Brownell");
  MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");

Re: [PATCH] rtc-cmos: make it load on PNPBIOS systems

[David Brownell]

On Thursday 26 April 2007, Marko Vrh wrote:
> Replace CONFIG_PNPACPI with CONFIG_PNP, so it loads on
> ACPI-less PNPBIOS systems.
> 
> Signed-off-by: Marko Vrh <mvrh@freeshells.ch>

Acked-by: David Brownell <dbrownell@users.sourceforge.net>

> 
> ----
> 
> diff -urNp linux-2.6.21/drivers/rtc/rtc-cmos.c linux-2.6.21.new/drivers/rtc/rtc-cmos.c
> --- linux-2.6.21/drivers/rtc/rtc-cmos.c	2007-04-26 05:08:32.000000000 +0200
> +++ linux-2.6.21.new/drivers/rtc/rtc-cmos.c	2007-04-26 23:58:36.000000000 +0200
> @@ -379,12 +379,12 @@ static irqreturn_t cmos_interrupt(int ir
>   		return IRQ_NONE;
>   }
> 
> -#ifdef	CONFIG_PNPACPI
> -#define	is_pnpacpi()	1
> +#ifdef	CONFIG_PNP
> +#define	is_pnp()	1
>   #define	INITSECTION
> 
>   #else
> -#define	is_pnpacpi()	0
> +#define	is_pnp()	0
>   #define	INITSECTION	__init
>   #endif
> 
> @@ -427,7 +427,7 @@ cmos_do_probe(struct device *dev, struct
>   	 * REVISIT for non-x86 systems we may need to handle io memory
>   	 * resources: ioremap them, and request_mem_region().
>   	 */
> -	if (is_pnpacpi()) {
> +	if (is_pnp()) {
>   		retval = request_resource(&ioport_resource, ports);
>   		if (retval < 0) {
>   			dev_dbg(dev, "i/o registers already in use\n");
> @@ -520,7 +520,7 @@ static void __exit cmos_do_remove(struct
> 
>   	cmos_do_shutdown();
> 
> -	if (is_pnpacpi())
> +	if (is_pnp())
>   		release_resource(cmos->iomem);
>   	rename_region(cmos->iomem, NULL);
> 
> @@ -613,7 +613,7 @@ static int cmos_resume(struct device *de
>    * the device node will always be created as a PNPACPI device.
>    */
> 
> -#ifdef	CONFIG_PNPACPI
> +#ifdef	CONFIG_PNP
> 
>   #include <linux/pnp.h>
> 
> @@ -684,11 +684,11 @@ static void __exit cmos_exit(void)
>   }
>   module_exit(cmos_exit);
> 
> -#else	/* no PNPACPI */
> +#else	/* no PNP */
> 
>   /*----------------------------------------------------------------*/
> 
> -/* Platform setup should have set up an RTC device, when PNPACPI is
> +/* Platform setup should have set up an RTC device, when PNP is
>    * unavailable ... this could happen even on (older) PCs.
>    */
> 
> @@ -734,7 +734,7 @@ static void __exit cmos_exit(void)
>   module_exit(cmos_exit);
> 
> 
> -#endif	/* !PNPACPI */
> +#endif	/* !PNP */
> 
>   MODULE_AUTHOR("David Brownell");
>   MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs");
>