LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jean Delvare <khali@linux-fr.org>
To: "Antonino Ingargiola" <tritemio@gmail.com>
Cc: "Linus Torvalds" <torvalds@linux-foundation.org>,
	"Linux Kernel Mailing List" <linux-kernel@vger.kernel.org>
Subject: Re: Linux 2.6.22-rc1
Date: Mon, 14 May 2007 17:21:38 +0200	[thread overview]
Message-ID: <20070514172138.1c870793@hyperion.delvare> (raw)
In-Reply-To: <5486cca80705140628w5ff43ebdqf6a5413203226d5@mail.gmail.com>

On Mon, 14 May 2007 15:28:00 +0200, Antonino Ingargiola wrote:
> Hi Jean,
> 
> 2007/5/14, Jean Delvare <khali@linux-fr.org>:
> [cut]
> > This is a rather bad idea to build the abituguru and hdaps drivers into
> > your kernel if you don't have these devices. Especially abituguru, as
> > it does arbitrary port probing.
> 
> My bad. I have an abit motherboard and in doubt I selected the driver
> (and then leaved selected since all worked on previous kernels). I've
> disabled them and the problem persist.

Sure, I didn't expect it to solve the problem. But as a general advice,
hardware monitoring drivers are better selected as modules than
built-in.

> > > I'm not using any of the listed drivers.
> >
> > How strange, why are they loaded then?
> 
> My reply refers to your list of drivers that require a certain version
> of lm-sensors.

Ah, OK. Sorry, I got confused.

> > > However the lm-sensors package is version 2.10.1-3 and
> > > libsensors.so.3.1.1 is on my system too (package libsensors3).
> >
> > Can you please share the output of "sensors" under both kernels 2.6.21.1
> > and 2.6.22-rc1.
> 
> Sure. On 2.6.21.1:
> 
> via686a-isa-6000
> Adapter: ISA adapter
> CPU core:  +1.63 V  (min =  +0.06 V, max =  +3.10 V)
> +2.5V:     +2.45 V  (min =  +0.06 V, max =  +3.10 V)
> I/O:       +3.52 V  (min =  +3.12 V, max =  +3.45 V)   ALARM
> +5V:       +5.05 V  (min =  +4.73 V, max =  +5.20 V)
> +12V:     +12.30 V  (min = +11.35 V, max = +12.48 V)
> CPU Fan:     0 RPM  (min = 42187 RPM, div = 2)
> P/S Fan:  2657 RPM  (min = 42187 RPM, div = 2)          ALARM

Hint: increase the fan clock dividers to 4.

> SYS Temp:  +40.9°C  (high =  +146°C, hyst =   -71°C)
> CPU Temp:  +43.3°C  (high =  +146°C, hyst =   -71°C)
> SBr Temp:  +24.9°C  (high =   -63°C, hyst =   -71°C)   ALARM
> 
> while on 2.6.22-rc1:
> 
> via686a-i2c-9191-6000
>  ERROR: Can't get adapter or algorithm?!?

Ah, interesting. Could it be that the gnome applet quits because it
fails to get the adapter name? That wouldn't be very smart, but that's
possible.

This is a side effect of an i2c-core cleanup. This is already fixed in
lm_sensors 2.10.3 (libsensors.so.3.1.3). Care to give it a try and
confirm it fixes the problem? Note that it might be a bit tricky to get
the gnome applet to use your own libsensors rather than the system one.
You might need to set the LD_LIBRARY_PATH environment variable before
the applet starts, or something similar.

> CPU core:  +1.65 V  (min =  +0.06 V, max =  +3.10 V)
> +2.5V:     +2.45 V  (min =  +0.06 V, max =  +3.10 V)
> I/O:       +3.52 V  (min =  +3.12 V, max =  +3.45 V)   ALARM
> +5V:       +5.08 V  (min =  +4.73 V, max =  +5.20 V)
> +12V:     +12.24 V  (min = +11.35 V, max = +12.48 V)
> CPU Fan:     0 RPM  (min = 42187 RPM, div = 2)
> P/S Fan:     0 RPM  (min = 42187 RPM, div = 2)          ALARM
> SYS Temp:  +41.3°C  (high =  +146°C, hyst =   -71°C)
> CPU Temp:  +41.8°C  (high =  +146°C, hyst =   -71°C)
> SBr Temp:  +24.9°C  (high =   -63°C, hyst =   -71°C)   ALARM
> 
> In both kernels I have set:
> 
>      I2C Algorithms  --->
>       <M> I2C PCF 8584 interfaces
>       <M> I2C PCA 9564 interfaces

Irrelevant to your problem, but you most certainly need neither - else
they would have been selected automatically.

-- 
Jean Delvare

  reply	other threads:[~2007-05-14 15:21 UTC|newest]

Thread overview: 79+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-05-13  3:20 Linus Torvalds
2007-05-13  9:20 ` Jan Engelhardt
2007-05-17  6:55   ` Len Brown
2007-05-13  9:29 ` Linux 2.6.22-rc1, 'nother randconfig Jan Engelhardt
2007-05-13  9:47 ` [PATCH] driver core: fix warning of temporarily unused multithreaded probing function (was: Re: Linux 2.6.22-rc1) Borislav Petkov
2007-05-14  8:06   ` Cornelia Huck
2007-05-13 12:44 ` Linux 2.6.22-rc1 Alessandro Suardi
2007-05-13 12:44 ` Indan Zupancic
2007-05-13 17:10 ` Antonino Ingargiola
2007-05-13 17:53   ` Linus Torvalds
2007-05-13 18:50     ` Antonino Ingargiola
2007-05-14  6:10       ` Jean Delvare
2007-05-14  8:34         ` Antonino Ingargiola
2007-05-14 12:14           ` Jean Delvare
2007-05-14 13:28             ` Antonino Ingargiola
2007-05-14 15:21               ` Jean Delvare [this message]
2007-05-14 16:04                 ` Antonino Ingargiola
2007-05-14 16:23                   ` Michal Piotrowski
2007-05-14 18:08                   ` Jean Delvare
2007-05-14 18:25                     ` Antonino Ingargiola
2007-05-14 16:30                 ` Linus Torvalds
2007-05-14 18:24                   ` Jean Delvare
2007-05-14 18:43                     ` Linus Torvalds
2007-05-14 19:28                       ` Jean Delvare
2007-05-14 19:53                         ` Jeff Garzik
2007-05-14 20:18                           ` Christoph Hellwig
2007-05-14 20:17                         ` Christoph Hellwig
2007-05-14 20:15                       ` Christoph Hellwig
2007-05-15 20:31             ` CONFIG_BREAK_MY_MACHINE was " Pavel Machek
2007-05-16 18:11               ` CONFIG_BREAK_MY_MACHINE Jean Delvare
2007-05-17  8:32                 ` CONFIG_BREAK_MY_MACHINE Hans de Goede
2007-05-17  8:47                   ` CONFIG_BREAK_MY_MACHINE Pavel Machek
2007-05-13 18:19 ` Linux 2.6.22-rc1 Tilman Schmidt
2007-05-13 23:20   ` David Miller
2007-05-13 23:32     ` Roland Dreier
2007-05-13 23:57     ` Tilman Schmidt
2007-05-14  4:37     ` Sam Ravnborg
2007-05-14  4:53       ` David Miller
2007-05-14  6:21     ` Satyam Sharma
2007-05-14 17:21   ` Jan Engelhardt
2007-05-14 17:32     ` Stefan Richter
2007-05-14 20:27       ` Jan Engelhardt
2007-05-14 18:01     ` Tilman Schmidt
2007-05-14 20:33       ` Jan Engelhardt
2007-05-14 21:40         ` Tilman Schmidt
2007-05-14 22:09           ` Stefan Richter
2007-05-15  3:02             ` Satyam Sharma
2007-05-15  8:08               ` Jan Engelhardt
2007-05-14 21:54         ` Stefan Richter
2007-05-15  2:34         ` Satyam Sharma
2007-05-15  2:42           ` Satyam Sharma
2007-05-15  6:05             ` Stefan Richter
2007-05-15  6:01           ` Stefan Richter
2007-05-15  8:16           ` Jan Engelhardt
2007-05-16  1:52             ` Satyam Sharma
2007-05-16  6:29               ` Stefan Richter
2007-05-16  9:56                 ` Satyam Sharma
2007-05-15 10:43           ` Tilman Schmidt
2007-05-16  1:39             ` Satyam Sharma
2007-05-16  9:14               ` Tilman Schmidt
2007-05-16  9:17                 ` Satyam Sharma
2007-05-15  5:35         ` Michael Gerdau
2007-05-13 20:51 ` 2.6.22-rc1: loop.c Alexey Dobriyan
2007-05-14  3:52   ` Jeremy Fitzhardinge
2007-05-13 22:53 ` Linux 2.6.22-rc1 Jeff Chua
2007-05-14  1:08 ` andrew hendry
2007-05-14  7:49 ` V4L Regression (Was: Linux 2.6.22-rc1) Robert Fitzsimons
2007-05-14 11:44 ` Linux 2.6.22-rc1, 'nother randconfig David Howells
2007-05-14 17:23   ` Jan Engelhardt
2007-05-15  9:26   ` David Howells
2007-05-15  9:40     ` Jan Engelhardt
2007-05-15  4:14 ` Linux 2.6.22-rc1 andrew hendry
2007-05-15  4:38   ` Linus Torvalds
2007-05-15  5:10     ` andrew hendry
2007-05-15 15:57       ` Linus Torvalds
2007-05-15 22:50         ` andrew hendry
2007-05-13  6:00 Jeff Chua
2007-05-13  6:13 ` Jeff Chua
2007-05-13  8:04 ` Jan Engelhardt

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20070514172138.1c870793@hyperion.delvare \
    --to=khali@linux-fr.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=torvalds@linux-foundation.org \
    --cc=tritemio@gmail.com \
    --subject='Re: Linux 2.6.22-rc1' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).