LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* Re: Linux 2.6.23-rc2
@ 2007-08-05 12:11 Jeff Chua
  2007-08-05 12:40 ` Antonino A. Daplas
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-05 12:11 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: lkml, Linus Torvalds, Antonino A. Daplas


On 8/5/07, H. Peter Anvin <hpa@zytor.com> wrote:
> Also, please submit your .config and kernel command line.

# cat /proc/cmdline

BOOT_IMAGE=(hd0,14)/linux/bzc1 root=/dev/sda2 resume=/dev/sda3 reboot=bios


Below is my .config ...

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.22
# Sat Aug  4 21:21:58 2007
#
CONFIG_X86_32=y
CONFIG_GENERIC_TIME=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32

#
# General setup
#
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
# CONFIG_IPC_NS is not set
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_UTS_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CPUSETS is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0

#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
CONFIG_PARAVIRT=y
# CONFIG_VMI is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MCORE2 is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_BKL=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_MCE is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=m
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_NR_QUICK=1
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_PM_SYSFS_DEPRECATED is not set
CONFIG_SOFTWARE_SUSPEND=y
CONFIG_PM_STD_PARTITION="/dev/sda3"
CONFIG_SUSPEND_SMP=y

#
# ACPI (Advanced Configuration and Power Interface) Support
#
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_SLEEP_PROC_FS=y
# CONFIG_ACPI_SLEEP_PROC_SLEEP is not set
# CONFIG_ACPI_PROCFS is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
# CONFIG_ACPI_VIDEO is not set
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_APM is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=y
# CONFIG_X86_POWERNOW_K6 is not set
# CONFIG_X86_POWERNOW_K7 is not set
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_GX_SUSPMOD is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_SPEEDSTEP_ICH is not set
# CONFIG_X86_SPEEDSTEP_SMI is not set
# CONFIG_X86_P4_CLOCKMOD is not set
# CONFIG_X86_CPUFREQ_NFORCE2 is not set
# CONFIG_X86_LONGRUN is not set
# CONFIG_X86_LONGHAUL is not set
# CONFIG_X86_E_POWERSAVER is not set

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set

#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
CONFIG_PCI_GODIRECT=y
# CONFIG_PCI_GOANY is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set

#
# PCCARD (PCMCIA/CardBus) support
#
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
# CONFIG_PD6729 is not set
# CONFIG_I82092 is not set
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set

#
# Core Netfilter Configuration
#
# CONFIG_NETFILTER_NETLINK is not set
CONFIG_NF_CONNTRACK_ENABLED=y
CONFIG_NF_CONNTRACK=y
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
CONFIG_NF_CT_PROTO_SCTP=y
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=y
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=y
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y
CONFIG_NETFILTER_XT_TARGET_MARK=y
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y
CONFIG_NETFILTER_XT_TARGET_NFLOG=y
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNMARK is not set
# CONFIG_NETFILTER_XT_MATCH_CONNTRACK is not set
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
CONFIG_NETFILTER_XT_MATCH_MAC=y
CONFIG_NETFILTER_XT_MATCH_MARK=y
CONFIG_NETFILTER_XT_MATCH_POLICY=y
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=y
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y
# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=y
CONFIG_NETFILTER_XT_MATCH_STATE=y
# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
# CONFIG_NETFILTER_XT_MATCH_STRING is not set
CONFIG_NETFILTER_XT_MATCH_TCPMSS=y
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=y

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=y
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=y
CONFIG_IP_NF_IPTABLES=y
CONFIG_IP_NF_MATCH_IPRANGE=y
# CONFIG_IP_NF_MATCH_TOS is not set
# CONFIG_IP_NF_MATCH_RECENT is not set
# CONFIG_IP_NF_MATCH_ECN is not set
# CONFIG_IP_NF_MATCH_AH is not set
# CONFIG_IP_NF_MATCH_TTL is not set
# CONFIG_IP_NF_MATCH_OWNER is not set
# CONFIG_IP_NF_MATCH_ADDRTYPE is not set
CONFIG_IP_NF_FILTER=y
CONFIG_IP_NF_TARGET_REJECT=y
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
CONFIG_NF_NAT=y
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=y
CONFIG_IP_NF_TARGET_REDIRECT=y
CONFIG_IP_NF_TARGET_NETMAP=y
CONFIG_IP_NF_TARGET_SAME=y
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_FTP=y
# CONFIG_NF_NAT_IRC is not set
CONFIG_NF_NAT_TFTP=y
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
# CONFIG_IP_NF_RAW is not set
CONFIG_IP_NF_ARPTABLES=y
CONFIG_IP_NF_ARPFILTER=y
# CONFIG_IP_NF_ARP_MANGLE is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set

#
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
CONFIG_IRDA=y

#
# IrDA protocols
#
# CONFIG_IRLAN is not set
# CONFIG_IRNET is not set
CONFIG_IRCOMM=m
# CONFIG_IRDA_ULTRA is not set

#
# IrDA options
#
# CONFIG_IRDA_CACHE_LAST_LSAP is not set
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
# CONFIG_DONGLE is not set
# CONFIG_KINGSUN_DONGLE is not set

#
# Old SIR device drivers
#

#
# Old Serial dongle support
#

#
# FIR device drivers
#
# CONFIG_USB_IRDA is not set
# CONFIG_SIGMATEL_FIR is not set
CONFIG_NSC_FIR=m
# CONFIG_WINBOND_FIR is not set
CONFIG_TOSHIBA_FIR=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
# CONFIG_VLSI_FIR is not set
# CONFIG_VIA_FIR is not set
# CONFIG_MCS_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
# CONFIG_BT_CMTP is not set
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIDTL1 is not set
# CONFIG_BT_HCIBT3C is not set
# CONFIG_BT_HCIBLUECARD is not set
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_IEEE80211_SOFTMAC is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_SYS_HYPERVISOR is not set

#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set

#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y

#
# Plug and Play support
#
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=20480
CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set

#
# Misc devices
#
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_THINKPAD_ACPI=y
# CONFIG_THINKPAD_ACPI_DEBUG is not set
# CONFIG_THINKPAD_ACPI_DOCK is not set
# CONFIG_THINKPAD_ACPI_BAY is not set
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECS=m
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=m
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
# CONFIG_IDEDMA_ONLYDISK is not set
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
CONFIG_BLK_DEV_PDC202XX_NEW=y
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_IVB is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set

#
# SCSI low-level drivers
#
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
CONFIG_MEGARAID_NEWGEN=y
CONFIG_MEGARAID_MM=y
CONFIG_MEGARAID_MAILBOX=y
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=y
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set

#
# PCMCIA SCSI adapter support
#
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_RAID0 is not set
# CONFIG_MD_RAID1 is not set
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
# CONFIG_DM_CRYPT is not set
# CONFIG_DM_SNAPSHOT is not set
# CONFIG_DM_MIRROR is not set
# CONFIG_DM_ZERO is not set
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set

#
# Fusion MPT device support
#
# CONFIG_FUSION is not set
# CONFIG_FUSION_SPI is not set
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#

#
# Texas Instruments PCILynx requires I2C
#
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m

#
# I2O device support
#
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=y
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
# CONFIG_TYPHOON is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_DGRS is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
# CONFIG_8139TOO is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
CONFIG_E1000_DISABLE_PACKET_SPLIT=y
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8187 is not set
# CONFIG_HOSTAP is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET_MII is not set
# CONFIG_USB_USBNET is not set
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
# CONFIG_PCMCIA_FMVJ18X is not set
CONFIG_PCMCIA_PCNET=m
# CONFIG_PCMCIA_NMCLAN is not set
# CONFIG_PCMCIA_SMC91C92 is not set
# CONFIG_PCMCIA_XIRC2PS is not set
# CONFIG_PCMCIA_AXNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
# CONFIG_PPP_SYNC_TTY is not set
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
# CONFIG_PPP_MPPE is not set
# CONFIG_PPPOE is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set

#
# ISDN subsystem
#
CONFIG_ISDN=m

#
# Old ISDN4Linux
#
# CONFIG_ISDN_I4L is not set

#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
# CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON is not set
CONFIG_CAPI_TRACE=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m

#
# CAPI hardware drivers
#

#
# Active AVM cards
#
# CONFIG_CAPI_AVM is not set

#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_USERIDI=m
CONFIG_ISDN_DIVAS_MAINT=m

#
# Telephony Support
#
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_PRINTER is not set
# CONFIG_PPDEV is not set
# CONFIG_TIPAR is not set

#
# IPMI
#
# CONFIG_IPMI_HANDLER is not set
# CONFIG_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
CONFIG_AGP_INTEL=y
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
# CONFIG_DRM_I830 is not set
CONFIG_DRM_I915=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set

#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set

#
# Dallas's 1-wire bus
#
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
# CONFIG_VIDEO_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
# CONFIG_VIDEO_VIVI is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZR364XX is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_USB_DSBR is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_VGASTATE is not set
# CONFIG_FB is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_SEQ_RTCTIMER_DEFAULT=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_AC97_CODEC=m
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=y
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
CONFIG_SND_INTEL8X0=m
CONFIG_SND_INTEL8X0M=m
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_SPLIT_ISO is not set
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set

#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
CONFIG_USB_LCD=m
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set

#
# LED devices
#
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_IDE_DISK=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y

#
# InfiniBand support
#
# CONFIG_INFINIBAND is not set

#
# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
#
CONFIG_EDAC=y

#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=y
# CONFIG_EDAC_AMD76X is not set
# CONFIG_EDAC_E7XXX is not set
# CONFIG_EDAC_E752X is not set
# CONFIG_EDAC_I82875P is not set
# CONFIG_EDAC_I82860 is not set
# CONFIG_EDAC_R82600 is not set
CONFIG_EDAC_POLL=y

#
# Real Time Clock
#
# CONFIG_RTC_CLASS is not set

#
# DMA Engine support
#
# CONFIG_DMA_ENGINE is not set

#
# DMA Clients
#

#
# DMA Devices
#

#
# Auxiliary Display support
#
# CONFIG_KS0108 is not set

#
# Virtualization
#
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_POSIX_ACL is not set
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=m
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
# CONFIG_REISERFS_FS_XATTR is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_RAMFS=y
# CONFIG_CONFIGFS_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set

#
# Network File Systems
#
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
# CONFIG_9P_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y

#
# Native Language Support
#
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set

#
# Distributed Lock Manager
#
# CONFIG_DLM is not set

#
# Instrumentation Support
#
# CONFIG_PROFILING is not set
# CONFIG_KPROBES is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_MUST_CHECK=y
# CONFIG_MAGIC_SYSRQ is not set
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set

#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
# CONFIG_CRYPTO_XCBC is not set
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=m
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=m
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set

#
# Hardware crypto devices
#
# CONFIG_CRYPTO_DEV_PADLOCK is not set
CONFIG_CRYPTO_DEV_GEODE=m

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y




^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05 12:11 Linux 2.6.23-rc2 Jeff Chua
@ 2007-08-05 12:40 ` Antonino A. Daplas
  2007-08-05 13:26   ` Jeff Chua
  0 siblings, 1 reply; 39+ messages in thread
From: Antonino A. Daplas @ 2007-08-05 12:40 UTC (permalink / raw)
  To: Jeff Chua; +Cc: H. Peter Anvin, lkml, Linus Torvalds

On Sun, 2007-08-05 at 20:11 +0800, Jeff Chua wrote:
> On 8/5/07, H. Peter Anvin <hpa@zytor.com> wrote:
> > Also, please submit your .config and kernel command line.
> 
> # cat /proc/cmdline
> 
> BOOT_IMAGE=(hd0,14)/linux/bzc1 root=/dev/sda2 resume=/dev/sda3 reboot=bios
> 
> 

Can you try with the boot option acpi_sleep=s3_bios,s3_mode

OR

if using s2ram, use s2ram -f a3

Tony


^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05 12:40 ` Antonino A. Daplas
@ 2007-08-05 13:26   ` Jeff Chua
  2007-08-05 16:47     ` Rafael J. Wysocki
  2007-08-06 15:40     ` Jan Engelhardt
  0 siblings, 2 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-05 13:26 UTC (permalink / raw)
  To: Antonino A. Daplas; +Cc: H. Peter Anvin, lkml, Linus Torvalds

On 8/5/07, Antonino A. Daplas <adaplas@gmail.com> wrote:

> Can you try with the boot option acpi_sleep=s3_bios,s3_mode
> OR
> if using s2ram, use s2ram -f a3

Tried both, text-console still not restored.

In fact, with "s2ram -f a3", backlight doesn't get restored. I've to
switch to F1 and back to X to get backlight to come back on.

One way to get console back is to "suspend-to-disk", and upon resume,
text-console works just fine.

Here's what see when I "cat /dev/vcs1" ...

            ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ

The pattern repeats and fill the whole screen.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05 13:26   ` Jeff Chua
@ 2007-08-05 16:47     ` Rafael J. Wysocki
  2007-08-06  0:36       ` Jeff Chua
  2007-08-06 15:40     ` Jan Engelhardt
  1 sibling, 1 reply; 39+ messages in thread
From: Rafael J. Wysocki @ 2007-08-05 16:47 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds,
	suspend-devel List

On Sunday, 5 August 2007 15:26, Jeff Chua wrote:
> On 8/5/07, Antonino A. Daplas <adaplas@gmail.com> wrote:
> 
> > Can you try with the boot option acpi_sleep=s3_bios,s3_mode
> > OR
> > if using s2ram, use s2ram -f a3
> 
> Tried both, text-console still not restored.
> 
> In fact, with "s2ram -f a3", backlight doesn't get restored. I've to
> switch to F1 and back to X to get backlight to come back on.
> 
> One way to get console back is to "suspend-to-disk", and upon resume,
> text-console works just fine.

What does 's2ram -i' say about your machine?

Rafael


-- 
"Premature optimization is the root of all evil." - Donald Knuth

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05 16:47     ` Rafael J. Wysocki
@ 2007-08-06  0:36       ` Jeff Chua
  2007-08-06 11:26         ` Rafael J. Wysocki
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-06  0:36 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds,
	suspend-devel List

On 8/6/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:

> What does 's2ram -i' say about your machine?

This machine can be identified by:
    sys_vendor   = "LENOVO"
    sys_product  = "1702E7A"
    sys_version  = "ThinkPad X60s"
    bios_version = "7BETD0WW (2.11 )"


Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06  0:36       ` Jeff Chua
@ 2007-08-06 11:26         ` Rafael J. Wysocki
  2007-08-06 12:34           ` Jeff Chua
  2007-08-06 16:40           ` H. Peter Anvin
  0 siblings, 2 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2007-08-06 11:26 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds,
	suspend-devel List

On Monday, 6 August 2007 02:36, Jeff Chua wrote:
> On 8/6/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> 
> > What does 's2ram -i' say about your machine?
> 
> This machine can be identified by:
>     sys_vendor   = "LENOVO"
>     sys_product  = "1702E7A"
>     sys_version  = "ThinkPad X60s"
>     bios_version = "7BETD0WW (2.11 )"

This means it's not in the whitelist, AFAICS.

Similar machines are known to work with "--acpi_sleep=3" or with
"--acpi_sleep=1 --vbe_mode".

Greetings,
Rafael


-- 
"Premature optimization is the root of all evil." - Donald Knuth

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 11:26         ` Rafael J. Wysocki
@ 2007-08-06 12:34           ` Jeff Chua
  2007-08-06 16:40           ` H. Peter Anvin
  1 sibling, 0 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-06 12:34 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds,
	suspend-devel List

On 8/6/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:

> This means it's not in the whitelist, AFAICS.
>
> Similar machines are known to work with "--acpi_sleep=3" or with
> "--acpi_sleep=1 --vbe_mode".

Good news.

"s2ram --force --acpi_sleep 1 --vbe_mode" works.

I also tried "--acpi_sleep=3", but that doesn't work. Same
text-console messed up.


Tony, Peter, Linus, Rafael, thanks for all your help!!!

With this workaround, I'm all happy on 2.6.23-rc2.

If there's anything else you want to try, please let me know.

Thank you,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05 13:26   ` Jeff Chua
  2007-08-05 16:47     ` Rafael J. Wysocki
@ 2007-08-06 15:40     ` Jan Engelhardt
  2007-08-06 16:06       ` Jeff Chua
  1 sibling, 1 reply; 39+ messages in thread
From: Jan Engelhardt @ 2007-08-06 15:40 UTC (permalink / raw)
  To: Jeff Chua; +Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds

[-- Attachment #1: Type: TEXT/PLAIN, Size: 302 bytes --]


On Aug 5 2007 21:26, Jeff Chua wrote:
>Here's what see when I "cat /dev/vcs1" ...
>
>            ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
>
>The pattern repeats and fill the whole screen.

That looks pretty much like all-one-bits (ÿ = 255).
What about vcsa1 (use hexdump -C)?


	Jan
-- 

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 15:40     ` Jan Engelhardt
@ 2007-08-06 16:06       ` Jeff Chua
  2007-08-06 16:34         ` Jan Engelhardt
  2007-08-06 16:46         ` Indan Zupancic
  0 siblings, 2 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-06 16:06 UTC (permalink / raw)
  To: Jan Engelhardt; +Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds

On 8/6/07, Jan Engelhardt <jengelh@computergmbh.de> wrote:

> >            ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
> That looks pretty much like all-one-bits (ÿ = 255).
> What about vcsa1 (use hexdump -C)?

# hexdump -C /dev/vcsa1
00000000  19 50 00 18 ff ff ff ff  ff ff ff ff ff ff ff ff  |.P..............|
00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
*
00000fa0  ff ff ff ff                                       |....|
00000fa4

Yep, it's all one's.

And once "s2ram" (without parameter) is executed, there's no way to
restore back the console in text-mode even using "s2ram --force
--acpi_sleep 1 --vbe_mode" until a "suspend-to-disk" or a reboot.

"s2ram --force --acpi_sleep 1 --vbe_mode"  will only work on
non-messed-up-console.


Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 16:06       ` Jeff Chua
@ 2007-08-06 16:34         ` Jan Engelhardt
  2007-08-06 16:46         ` Indan Zupancic
  1 sibling, 0 replies; 39+ messages in thread
From: Jan Engelhardt @ 2007-08-06 16:34 UTC (permalink / raw)
  To: Jeff Chua; +Cc: Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds

[-- Attachment #1: Type: TEXT/PLAIN, Size: 1020 bytes --]


On Aug 7 2007 00:06, Jeff Chua wrote:
>On 8/6/07, Jan Engelhardt <jengelh@computergmbh.de> wrote:
>
>> >            ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
>> That looks pretty much like all-one-bits (ÿ = 255).
>> What about vcsa1 (use hexdump -C)?
>
># hexdump -C /dev/vcsa1
>00000000  19 50 00 18 ff ff ff ff  ff ff ff ff ff ff ff ff  |.P..............|
>00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
>*
>00000fa0  ff ff ff ff                                       |....|
>00000fa4
>
>Yep, it's all one's.

If no s2ram was involved at all, and vcs and vcsa output was as you
describe, then your display whould actually show white blinking ÿs on a
gray background. :>

>And once "s2ram" (without parameter) is executed, there's no way to
>restore back the console in text-mode even using "s2ram --force
>--acpi_sleep 1 --vbe_mode" until a "suspend-to-disk" or a reboot.
>
>"s2ram --force --acpi_sleep 1 --vbe_mode"  will only work on
>non-messed-up-console.


	Jan
-- 

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 11:26         ` Rafael J. Wysocki
  2007-08-06 12:34           ` Jeff Chua
@ 2007-08-06 16:40           ` H. Peter Anvin
  2007-08-06 19:17             ` [Suspend-devel] " Rafael J. Wysocki
  1 sibling, 1 reply; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-06 16:40 UTC (permalink / raw)
  To: Rafael J. Wysocki
  Cc: Jeff Chua, Antonino A. Daplas, lkml, Linus Torvalds, suspend-devel List

Rafael J. Wysocki wrote:
> On Monday, 6 August 2007 02:36, Jeff Chua wrote:
>> On 8/6/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:
>>
>>> What does 's2ram -i' say about your machine?
>> This machine can be identified by:
>>     sys_vendor   = "LENOVO"
>>     sys_product  = "1702E7A"
>>     sys_version  = "ThinkPad X60s"
>>     bios_version = "7BETD0WW (2.11 )"
> 
> This means it's not in the whitelist, AFAICS.
> 
> Similar machines are known to work with "--acpi_sleep=3" or with
> "--acpi_sleep=1 --vbe_mode".
> 

I'm not all that familiar with s2ram.  Any feel for why the behaviour
would have changed from the old setup code at all?  Since the setup code
isn't entered on resume from STR (unlike resume from STD), as far as I
know, there can only be "some little bit of state" hanging around.

If not then perhaps we should try to get a dump of the real-mode state
area for both kernels (which would need a patch, unfortunately.)

	-hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 16:06       ` Jeff Chua
  2007-08-06 16:34         ` Jan Engelhardt
@ 2007-08-06 16:46         ` Indan Zupancic
  2007-08-06 17:16           ` H. Peter Anvin
  2007-08-06 22:48           ` Jeff Chua
  1 sibling, 2 replies; 39+ messages in thread
From: Indan Zupancic @ 2007-08-06 16:46 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Jan Engelhardt, Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds

On Mon, August 6, 2007 18:06, Jeff Chua wrote:
> On 8/6/07, Jan Engelhardt <jengelh@computergmbh.de> wrote:
>
>> >            ���������������������������
>> That looks pretty much like all-one-bits (� = 255).
>> What about vcsa1 (use hexdump -C)?
>
> # hexdump -C /dev/vcsa1
> 00000000  19 50 00 18 ff ff ff ff  ff ff ff ff ff ff ff ff  |.P..............|
> 00000010  ff ff ff ff ff ff ff ff  ff ff ff ff ff ff ff ff  |................|
> *
> 00000fa0  ff ff ff ff                                       |....|
> 00000fa4
>
> Yep, it's all one's.
>
> And once "s2ram" (without parameter) is executed, there's no way to
> restore back the console in text-mode even using "s2ram --force
> --acpi_sleep 1 --vbe_mode" until a "suspend-to-disk" or a reboot.

Does executing unicode_start, unicode_stop fixes it?

Greetings,

Indan



^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 16:46         ` Indan Zupancic
@ 2007-08-06 17:16           ` H. Peter Anvin
  2007-08-06 17:32             ` Indan Zupancic
  2007-08-06 22:48           ` Jeff Chua
  1 sibling, 1 reply; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-06 17:16 UTC (permalink / raw)
  To: Indan Zupancic
  Cc: Jeff Chua, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

Indan Zupancic wrote:
> 
> Does executing unicode_start, unicode_stop fixes it?
> 

Does that seem likely, since his display isn't even in text mode?

	-hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 17:16           ` H. Peter Anvin
@ 2007-08-06 17:32             ` Indan Zupancic
  2007-08-06 17:33               ` H. Peter Anvin
  0 siblings, 1 reply; 39+ messages in thread
From: Indan Zupancic @ 2007-08-06 17:32 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Jeff Chua, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

On Mon, August 6, 2007 19:16, H. Peter Anvin wrote:
> Indan Zupancic wrote:
>>
>> Does executing unicode_start, unicode_stop fixes it?
>>
>
> Does that seem likely, since his display isn't even in text mode?

No idea, just thought it would be worth a try. My console is garbled
too, doing that unicode stuff fixed it for me. (Though it appears to
work better nowaday: new text is fine and other than the first consoles
are fine too, which wasn't the case a while ago I think.)

I thought he was using a VGA console, wouldn't that be in text mode?

Greetings,

Indan



^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 17:32             ` Indan Zupancic
@ 2007-08-06 17:33               ` H. Peter Anvin
  2007-08-06 22:53                 ` Jeff Chua
  0 siblings, 1 reply; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-06 17:33 UTC (permalink / raw)
  To: Indan Zupancic
  Cc: Jeff Chua, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

Indan Zupancic wrote:
> 
> I thought he was using a VGA console, wouldn't that be in text mode?
> 

That is, exactly, the problem.  It should be, it's not.

	-hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: [Suspend-devel] Linux 2.6.23-rc2
  2007-08-06 16:40           ` H. Peter Anvin
@ 2007-08-06 19:17             ` Rafael J. Wysocki
  0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2007-08-06 19:17 UTC (permalink / raw)
  To: suspend-devel
  Cc: H. Peter Anvin, Linus Torvalds, Antonino A. Daplas, Jeff Chua,
	lkml, Pavel Machek

On Monday, 6 August 2007 18:40, H. Peter Anvin wrote:
> Rafael J. Wysocki wrote:
> > On Monday, 6 August 2007 02:36, Jeff Chua wrote:
> >> On 8/6/07, Rafael J. Wysocki <rjw@sisk.pl> wrote:
> >>
> >>> What does 's2ram -i' say about your machine?
> >> This machine can be identified by:
> >>     sys_vendor   = "LENOVO"
> >>     sys_product  = "1702E7A"
> >>     sys_version  = "ThinkPad X60s"
> >>     bios_version = "7BETD0WW (2.11 )"
> > 
> > This means it's not in the whitelist, AFAICS.
> > 
> > Similar machines are known to work with "--acpi_sleep=3" or with
> > "--acpi_sleep=1 --vbe_mode".
> > 
> 
> I'm not all that familiar with s2ram.

It's just a wrapper around the kernel's suspend code that allows you to restore
the state of the graphics by running some additional code in real mode from
the user space.

> Any feel for why the behaviour would have changed from the old setup code at
> all?

With "--vbe_mode" s2ram saves the VBE mode setting before the suspend and sets
it to the same value after the resume.  Thus, it seems that the VBE mode
setting was previously preserved across the suspend/resume cycle and now it is
not.

Running s2ram with "--acpi_sleep 1" is equivalent to echoing 1 to
/proc/sys/kernel/acpi_video_flags before the suspend.

> Since the setup code isn't entered on resume from STR (unlike resume from
> STD), as far as I know, there can only be "some little bit of state" hanging
> around. 

The real mode code executed during resume is in
arch/x86_64/kernel/acpi/wakeup.S or in arch/i386/kernel/acpi/wakeup.S ,
depending on the architecture.

Greetings,
Rafael


-- 
"Premature optimization is the root of all evil." - Donald Knuth

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 16:46         ` Indan Zupancic
  2007-08-06 17:16           ` H. Peter Anvin
@ 2007-08-06 22:48           ` Jeff Chua
  1 sibling, 0 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-06 22:48 UTC (permalink / raw)
  To: Indan Zupancic
  Cc: Jan Engelhardt, Antonino A. Daplas, H. Peter Anvin, lkml, Linus Torvalds

On 8/7/07, Indan Zupancic <indan@nul.nu> wrote:

> Does executing unicode_start, unicode_stop fixes it?

Doesn't seem to fix it. Now that I've to type blinding, I realised
that the text-console is about 1/20 of the whole screen size. If I
hold on to ENTER key, I could see the screen scroll. But sometimes,
the screen would just be blank and nothing shown. Whatever it is, I
could still type "startx" to go into X.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 17:33               ` H. Peter Anvin
@ 2007-08-06 22:53                 ` Jeff Chua
  2007-08-06 22:54                   ` H. Peter Anvin
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-06 22:53 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Indan Zupancic, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

On 8/7/07, H. Peter Anvin <hpa@zytor.com> wrote:
> Indan Zupancic wrote:
> >
> > I thought he was using a VGA console, wouldn't that be in text mode?
> >
>
> That is, exactly, the problem.  It should be, it's not.

The text-console is the VGA console right? I hope we're refering to
the same thing. It's the first boot-up screen I get without going into
X (startx). It's /dev/tty1.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 22:53                 ` Jeff Chua
@ 2007-08-06 22:54                   ` H. Peter Anvin
  2007-08-06 22:57                     ` Jeff Chua
  0 siblings, 1 reply; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-06 22:54 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Indan Zupancic, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

Jeff Chua wrote:
> On 8/7/07, H. Peter Anvin <hpa@zytor.com> wrote:
>> Indan Zupancic wrote:
>>> I thought he was using a VGA console, wouldn't that be in text mode?
>>>
>> That is, exactly, the problem.  It should be, it's not.
> 
> The text-console is the VGA console right? I hope we're refering to
> the same thing. It's the first boot-up screen I get without going into
> X (startx). It's /dev/tty1.

Does it show little penguins as the system boots?

	-hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 22:54                   ` H. Peter Anvin
@ 2007-08-06 22:57                     ` Jeff Chua
  2007-08-06 23:00                       ` H. Peter Anvin
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-06 22:57 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Indan Zupancic, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

On 8/7/07, H. Peter Anvin <hpa@zytor.com> wrote:

> Does it show little penguins as the system boots?

No I don't have that. I'm not using a "splash" screen in grub2. And
funny thing is I don't get any problem up to 2.6.22.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-06 22:57                     ` Jeff Chua
@ 2007-08-06 23:00                       ` H. Peter Anvin
  0 siblings, 0 replies; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-06 23:00 UTC (permalink / raw)
  To: Jeff Chua
  Cc: Indan Zupancic, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds

Jeff Chua wrote:
> On 8/7/07, H. Peter Anvin <hpa@zytor.com> wrote:
> 
>> Does it show little penguins as the system boots?
> 
> No I don't have that. I'm not using a "splash" screen in grub2. And
> funny thing is I don't get any problem up to 2.6.22.
> 

I asked you about AS THE KERNEL IS BOOTING, not what grub2 does.

Anyway, I know you "didn't get any problems up to 2.6.22", which is why
we're trying to debug this.

Could you please post your dmesg output?

	-hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-07 17:05                 ` David Weinehall
@ 2007-08-08  2:46                   ` Jeff Chua
  0 siblings, 0 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-08  2:46 UTC (permalink / raw)
  To: Jeff Chua, H. Peter Anvin, Linus Torvalds, lkml, Antonino A. Daplas

On 8/8/07, David Weinehall <tao@kernel.org> wrote:

> Try adding acpi_sleep=s3_bios to your kernel boot options and see if it
> helps.

I tried, but that didn't help.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05 11:52               ` Jeff Chua
@ 2007-08-07 17:05                 ` David Weinehall
  2007-08-08  2:46                   ` Jeff Chua
  0 siblings, 1 reply; 39+ messages in thread
From: David Weinehall @ 2007-08-07 17:05 UTC (permalink / raw)
  To: Jeff Chua; +Cc: H. Peter Anvin, Linus Torvalds, lkml, Antonino A. Daplas

On Sun, Aug 05, 2007 at 07:52:07PM +0800, Jeff Chua wrote:
> On 8/5/07, H. Peter Anvin <hpa@zytor.com> wrote:
> 
> > Okay, since you're using VGA console this means suspend-to-ram isn't
> > restoring the mode.
> > Does it matter if you suspend from inside X or not?
> 
> Just tested it. It doesn't matter... text console still messed up. X
> is ok after resume.

Try adding acpi_sleep=s3_bios to your kernel boot options and see if it
helps.


Regards: David
-- 
 /) David Weinehall <tao@acc.umu.se> /) Northern lights wander      (\
//  Maintainer of the v2.0 kernel   //  Dance across the winter sky //
\)  http://www.acc.umu.se/~tao/    (/   Full colour fire           (/

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
@ 2007-08-06 23:20 Jeff Chua
  0 siblings, 0 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-06 23:20 UTC (permalink / raw)
  To: H. Peter Anvin
  Cc: Indan Zupancic, Jan Engelhardt, Antonino A. Daplas, lkml, Linus Torvalds


Here's my dmesg ...


Thanks,
Jeff

Linux version 2.6.23-rc2 (root@boston.corp.fedex.com) (gcc version 3.4.5) #5 SMP PREEMPT Sat Aug 4 13:03:10 SGT 2007
BIOS-provided physical RAM map:
  BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
  BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
  BIOS-e820: 0000000000100000 - 00000000bf6d0000 (usable)
  BIOS-e820: 00000000bf6d0000 - 00000000bf6df000 (ACPI data)
  BIOS-e820: 00000000bf6df000 - 00000000bf700000 (ACPI NVS)
  BIOS-e820: 00000000bf700000 - 00000000c0000000 (reserved)
  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
2166MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f67f0
Entering add_active_range(0, 0, 784080) 0 entries of 256 used
Zone PFN ranges:
   DMA             0 ->     4096
   Normal       4096 ->   229376
   HighMem    229376 ->   784080
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
     0:        0 ->   784080
On node 0 totalpages: 784080
   DMA zone: 32 pages used for memmap
   DMA zone: 0 pages reserved
   DMA zone: 4064 pages, LIFO batch:0
   Normal zone: 1760 pages used for memmap
   Normal zone: 223520 pages, LIFO batch:31
   HighMem zone: 4333 pages used for memmap
   HighMem zone: 550371 pages, LIFO batch:31
   Movable zone: 0 pages used for memmap
DMI present.
ACPI: RSDP 000F67B0, 0024 (r2 LENOVO)
ACPI: XSDT BF6D1828, 008C (r1 LENOVO TP-7B        2110  LTP        0)
ACPI: FACP BF6D1900, 00F4 (r3 LENOVO TP-7B        2110 LNVO        1)
ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
ACPI: DSDT BF6D1C90, CF2F (r1 LENOVO TP-7B        2110 MSFT  100000E)
ACPI: FACS BF6F4000, 0040
ACPI: SSDT BF6D1AB4, 01DC (r1 LENOVO TP-7B        2110 MSFT  100000E)
ACPI: ECDT BF6DEBBF, 0052 (r1 LENOVO TP-7B        2110 LNVO        1)
ACPI: TCPA BF6DEC11, 0032 (r2 LENOVO TP-7B        2110 LNVO        1)
ACPI: APIC BF6DEC43, 0068 (r1 LENOVO TP-7B        2110 LNVO        1)
ACPI: MCFG BF6DECAB, 003C (r1 LENOVO TP-7B        2110 LNVO        1)
ACPI: HPET BF6DECE7, 0038 (r1 LENOVO TP-7B        2110 LNVO        1)
ACPI: SLIC BF6DEE62, 0176 (r1 LENOVO TP-7B        2110  LTP        0)
ACPI: BOOT BF6DEFD8, 0028 (r1 LENOVO TP-7B        2110  LTP        1)
ACPI: SSDT BF6F2645, 025F (r1 LENOVO TP-7B        2110 INTL 20050513)
ACPI: SSDT BF6F28A4, 00A6 (r1 LENOVO TP-7B        2110 INTL 20050513)
ACPI: SSDT BF6F294A, 04F7 (r1 LENOVO TP-7B        2110 INTL 20050513)
ACPI: SSDT BF6F2E41, 01D8 (r1 LENOVO TP-7B        2110 INTL 20050513)
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 6:14 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 6:14 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at c4000000 (gap: c0000000:30000000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000dc000
swsusp: Registered nosave memory region: 00000000000dc000 - 0000000000100000
Built 1 zonelists in Zone order.  Total pages: 777955
Kernel command line: BOOT_IMAGE=(hd0,14)/linux/bzc1 root=/dev/sda2 resume=/dev/sda3 reboot=bios testing_only="this is got to be good. Now I can send in a very long line just like 2.4 and need not worry about the line being too long. What a great way to start a great year!!! Cool!"
mapped APIC to ffffb000 (fee00000)
mapped IOAPIC to ffffa000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 1828.798 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 3105480k/3136320k available (2531k kernel code, 29740k reserved, 1235k data, 224k init, 2218816k highmem)
virtual kernel memory layout:
     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
     vmalloc : 0xf8800000 - 0xffbfe000   ( 115 MB)
     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
       .init : 0xc04b4000 - 0xc04ec000   ( 224 kB)
       .data : 0xc0378cc2 - 0xc04ad8e0   (1235 kB)
       .text : 0xc0100000 - 0xc0378cc2   (2531 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 3661.54 BogoMIPS (lpj=7323093)
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 00000000
monitor/mwait feature present.
using mwait in idle threads.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000 00000000
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
CPU0: Intel(R) Core(TM) Duo CPU      L2500  @ 1.83GHz stepping 0c
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3657.57 BogoMIPS (lpj=7315142)
CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000 00000000
monitor/mwait feature present.
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 2048K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000 00000000
CPU1: Intel(R) Core(TM) Duo CPU      L2500  @ 1.83GHz stepping 0c
Total of 2 processors activated (7319.11 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
checking TSC synchronization [CPU#0 -> CPU#1]:
Measured 579667 cycles TSC warp between CPUs, turning off TSC clock.
Marking TSC unstable due to: check_tsc_sync_source failed.
Brought up 2 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: EC description table is found, configuring boot EC
ACPI: Interpreter enabled
ACPI: (supports S0 S3)
ACPI: Using IOAPIC for interrupt routing
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62<6>ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: Power Resource [PUBS] (on)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
libata version 2.21 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
NET: Registered protocol family 23
Time: hpet clocksource has been installed.
pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
pnp: 00:02: iomem range 0xf0000000-0xf3ffffff could not be reserved
pnp: 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
PCI: Bridge: 0000:00:1c.0
   IO window: 2000-2fff
   MEM window: ee000000-ee0fffff
   PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
   IO window: 3000-4fff
   MEM window: ec000000-edffffff
   PREFETCH window: e4000000-e40fffff
PCI: Bridge: 0000:00:1c.2
   IO window: 5000-6fff
   MEM window: e8000000-e9ffffff
   PREFETCH window: e4100000-e41fffff
PCI: Bridge: 0000:00:1c.3
   IO window: 7000-8fff
   MEM window: ea000000-ebffffff
   PREFETCH window: e4200000-e42fffff
PCI: Bus 22, cardbus bridge: 0000:15:00.0
   IO window: 00009000-000090ff
   IO window: 00009400-000094ff
   PREFETCH window: e0000000-e3ffffff
   MEM window: c4000000-c7ffffff
PCI: Bridge: 0000:00:1e.0
   IO window: 9000-cfff
   MEM window: e4300000-e7ffffff
   PREFETCH window: e0000000-e3ffffff
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 20 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 21 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 22 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1c.2 to 64
ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1c.3 to 64
PCI: Enabling device 0000:00:1e.0 (0005 -> 0007)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:15:00.0[A] -> GSI 16 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:15:00.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
PCI: Setting latency timer of device 0000:00:1c.2 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.2:pcie00]
Allocate Port Service[0000:00:1c.2:pcie02]
PCI: Setting latency timer of device 0000:00:1c.3 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.3:pcie00]
Allocate Port Service[0000:00:1c.3:pcie02]
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button (FF) as /devices/virtual/input/input0
ACPI: Power Button (FF) [PWRF]
input: Lid Switch as /devices/virtual/input/input1
ACPI: Lid Switch [LID]
input: Sleep Button (CM) as /devices/virtual/input/input2
ACPI: Sleep Button (CM) [SLPB]
ACPI: SSDT BF6F1D26, 0240 (r1  PmRef  Cpu0Ist      100 INTL 20050513)
ACPI: SSDT BF6F1FEB, 065A (r1  PmRef  Cpu0Cst      100 INTL 20050513)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT BF6F1C5E, 00C8 (r1  PmRef  Cpu1Ist      100 INTL 20050513)
ACPI: SSDT BF6F1F66, 0085 (r1  PmRef  Cpu1Cst      100 INTL 20050513)
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (55 C)
ACPI: Thermal Zone [THM1] (55 C)
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.102
agpgart: Detected an Intel 945GM Chipset.
agpgart: Detected 7932K stolen memory.
agpgart: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 20
[drm] Initialized i915 1.6.0 20060119 on minor 0
RAMDISK driver initialized: 16 RAM disks of 20480K size 1024 blocksize
loop: module loaded
thinkpad_acpi: ThinkPad ACPI Extras v0.15
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 7BETD0WW (2.11 ), EC 7BHT40WW-1.13
thinkpad_acpi: Lenovo ThinkPad X60s
thinkpad_acpi: radio switch found; radios are enabled
input: ThinkPad Extra Buttons as /devices/virtual/input/input3
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH7: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[C] -> GSI 16 (level, low) -> IRQ 20
ICH7: chipset revision 2
ICH7: not 100% native mode: will probe irqs later
     ide0: BM-DMA at 0x1810-0x1817, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
Clocksource tsc unstable (delta = -478084046 ns)
Probing IDE interface ide0...
Probing IDE interface ide1...
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
megasas: 00.00.03.10-rc5 Thu May 17 10:09:32 PDT 2007
ahci 0000:00:1f.2: version 2.3
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 16 (level, low) -> IRQ 20
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 cmd 0xf8846500 ctl 0x00000000 bmdma 0x00000000 irq 20
ata2: SATA max UDMA/133 cmd 0xf8846580 ctl 0x00000000 bmdma 0x00000000 irq 20
ata3: SATA max UDMA/133 cmd 0xf8846600 ctl 0x00000000 bmdma 0x00000000 irq 20
ata4: SATA max UDMA/133 cmd 0xf8846680 ctl 0x00000000 bmdma 0x00000000 irq 20
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541616J9SA00, SB4OC70P, max UDMA/100
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (not used)
ata1.00: configured for UDMA/100
ata2: SATA link down (SStatus 0 SControl 0)
ata3: SATA link down (SStatus 0 SControl 0)
ata4: SATA link down (SStatus 0 SControl 0)
scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS54161 SB4O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 >
sd 0:0:0:0: [sda] Attached SCSI disk
usbmon: debugfs is not available
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 21, io mem 0xee444000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 22, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 23
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 23, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 21, io base 0x00001880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EDAC MC: Ver: 2.1.0 Aug  4 2007
usb 5-2: new full speed USB device using uhci_hcd and address 2
usb 5-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Advanced Linux Sound Architecture Driver Version 1.0.14 (Fri Jul 20 09:12:58 2007 UTC).
ACPI: PCI Interrupt 0000:00:1b.0[B] -> GSI 17 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1b.0 to 64
ALSA device list:
   #0: HDA Intel at 0xee240000 irq 22
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
arp_tables: (C) 2002 David S. Miller
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Starting balanced_irq
Using IPI No-Shortcut mode
IBM TrackPoint firmware: 0x0e, buttons: 3/3
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input5
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
Adding 3719036k swap on /dev/sda3.  Priority:-1 extents:1 across:3719036k

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 16:11       ` Linus Torvalds
  2007-08-04 18:06         ` H. Peter Anvin
  2007-08-05  2:29         ` Jeff Chua
@ 2007-08-05 12:04         ` Jeff Chua
  2 siblings, 0 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-05 12:04 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: lkml, H. Peter Anvin

On 8/5/07, Linus Torvalds <torvalds@linux-foundation.org> wrote:

> I thought that the X server did all that on its own these days, but that may
> be just the newer "intel" driver, not the older "i810" driver that you
> probably use.

I've just checked. Upon boot-up into text-console (even without
starting X), suspend-to-ram and resume will still corrupt the display.

> (Side note: if you have a modern distro, you might try to change the line
> that says
>         Driver "i810"

I've try changing to "intel" and both still doesn't restore the
text-console. "X" restored ok. On my Xorg build, i810_drv.so is linked
to intel_drv.so.

I tried to "revert" the commit, but it doesn't look like it can be
done easily as there're changes after the commit that affected those 2
files.

If there's anything I can help to debug, please let me know.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05  3:11             ` H. Peter Anvin
@ 2007-08-05 11:52               ` Jeff Chua
  2007-08-07 17:05                 ` David Weinehall
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-05 11:52 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: Linus Torvalds, lkml, Antonino A. Daplas

On 8/5/07, H. Peter Anvin <hpa@zytor.com> wrote:

> Okay, since you're using VGA console this means suspend-to-ram isn't
> restoring the mode.
> Does it matter if you suspend from inside X or not?

Just tested it. It doesn't matter... text console still messed up. X
is ok after resume.


Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-05  2:37           ` Jeff Chua
@ 2007-08-05  3:11             ` H. Peter Anvin
  2007-08-05 11:52               ` Jeff Chua
  0 siblings, 1 reply; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-05  3:11 UTC (permalink / raw)
  To: Jeff Chua; +Cc: Linus Torvalds, lkml, Antonino A. Daplas

Jeff Chua wrote:
> On 8/5/07, H. Peter Anvin <hpa@zytor.com> wrote:
> 
>> Also, can you please describe "messed up" in more detail?
> 
> The screen went into some graphic mode that can't be reset no matter
> what I tried (stty reset). I see all kinds of ramdom pattern/color
> everywhere. Then typing "startx" would get in X just fine. But trying
> to get back to console (ALT F1) or (Ctrl ALT BackSpace) would still
> end up with the messed-up console.
> 

>> Are you using the VGA console or a framebuffer console?
>
> VGA console.

Okay, since you're using VGA console this means suspend-to-ram isn't
restoring the mode.

Does it matter if you suspend from inside X or not?

>> We had one report of "screen messed up" already that did get fixed
>> (CONFIG_FIRMWARE_EDID not working.)
> 
> How can I try this?

The patch for this is in -rc2.

	-hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 18:06         ` H. Peter Anvin
  2007-08-04 21:02           ` Antonino A. Daplas
@ 2007-08-05  2:37           ` Jeff Chua
  2007-08-05  3:11             ` H. Peter Anvin
  1 sibling, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-05  2:37 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: Linus Torvalds, lkml, Antonino A. Daplas

On 8/5/07, H. Peter Anvin <hpa@zytor.com> wrote:

> Also, can you please describe "messed up" in more detail?

The screen went into some graphic mode that can't be reset no matter
what I tried (stty reset). I see all kinds of ramdom pattern/color
everywhere. Then typing "startx" would get in X just fine. But trying
to get back to console (ALT F1) or (Ctrl ALT BackSpace) would still
end up with the messed-up console.

> We had one report of "screen messed up" already that did get fixed
> (CONFIG_FIRMWARE_EDID not working.)

How can I try this?

> Are you using the VGA console or a framebuffer console?

VGA console.

> Also, please submit your .config and kernel command line.

I'll get this to you later today. Don't have my PC with me now.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 16:11       ` Linus Torvalds
  2007-08-04 18:06         ` H. Peter Anvin
@ 2007-08-05  2:29         ` Jeff Chua
  2007-08-05 12:04         ` Jeff Chua
  2 siblings, 0 replies; 39+ messages in thread
From: Jeff Chua @ 2007-08-05  2:29 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: lkml, H. Peter Anvin

On 8/5/07, Linus Torvalds <torvalds@linux-foundation.org> wrote:

> Jeff - do I understand correctly that the "or" means that even *without* a
> suspend-to-ram sequence, and just by going into X and then going back to
> text-mode, the screen is corrupt?

I've done more tests. It seems that "suspend-to-ram" sequence is the
culprit. After resume, the text console is messed up. Not switching
X/console.

Boot up. Console -> X ok -> Console ok -> s2ram -> console bad -> X ok
-> console bad -> X ok.

> I just want to make sure that there is no suspend-related activity
> required for this at all, and the only common issue is probably just that
> suspend ends up *also* triggering the X mode-setting at resume..

It's suspend as indicated above.


> (Side note: if you have a modern distro, you might try to change the line
> that says
>         Driver "i810"
> in the /etc/X11/xorg.conf to say
>         Driver "intel"

I'll test this and get back.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 10:30 ` Rafael J. Wysocki
@ 2007-08-04 22:15   ` Rafael J. Wysocki
  0 siblings, 0 replies; 39+ messages in thread
From: Rafael J. Wysocki @ 2007-08-04 22:15 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List, Andrew Morton

On Saturday, 4 August 2007 12:30, Rafael J. Wysocki wrote:
> On Saturday, 4 August 2007 05:50, Linus Torvalds wrote:
> > 
> > So I tried to hold people to the merge window, and said no to a few pull 
> > requests, but this whole "-rc2 is the new -rc1" thing is a disease, and 
> > not only is -rc2 late, it's bigger than it should be. Oh, well.
> 
> Suspend and hibernation are busted on SMP x86_64, AFAICS.  My test boxes
> don't resume.
> 
> 2.6.23-rc1 and 2.6.23-rc1-mm2 both work just fine on the same machines, so
> this has to be due to a recent change.  I'll bisect later today.

Well, fortunately there's nothing wrong with 2.6.23-rc2 in this respect and it
was my own patch that busted suspend and hibernation for me.  Specifically,
this one: http://lkml.org/lkml/2007/8/4/29 .

Greetings,
Rafael


-- 
"Premature optimization is the root of all evil." - Donald Knuth

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 18:06         ` H. Peter Anvin
@ 2007-08-04 21:02           ` Antonino A. Daplas
  2007-08-05  2:37           ` Jeff Chua
  1 sibling, 0 replies; 39+ messages in thread
From: Antonino A. Daplas @ 2007-08-04 21:02 UTC (permalink / raw)
  To: H. Peter Anvin; +Cc: Linus Torvalds, Jeff Chua, lkml

On Sat, 2007-08-04 at 11:06 -0700, H. Peter Anvin wrote:
> Linus Torvalds wrote:
> > 
> > On Sat, 4 Aug 2007, Jeff Chua wrote:
> >> On 8/4/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
> >>>> After resume from s2ram or switching to console from X, my console is
> >>>> messed up on rc1 and rc2. Is there a fix for this?
> >>> This is on IBM X60. i915 chipset. No problem on 2.6.22. If this is a
> >>> known problem, than I don't need to bisect all over again.
> >> I managed to bisect down to this commit. Without this, console screen
> >> can resume without video mess.
> > 
> > [ The commit being 4fd06960f120e02e9abc802a09f9511c400042a5: "Use the new 
> >   x86 setup code for i386" ]
> > 
> > Very interesting. 
> > 
> > Jeff - do I understand correctly that the "or" means that even *without* a 
> > suspend-to-ram sequence, and just by going into X and then going back to 
> > text-mode, the screen is corrupt?
> 
> Also, can you please describe "messed up" in more detail?  We had one
> report of "screen messed up" already that did get fixed
> (CONFIG_FIRMWARE_EDID not working.)

I believe this is the case where VBE DDC reading is non-contributory.

> 
> Are you using the VGA console or a framebuffer console?
> 
> Also, please submit your .config and kernel command line.

The dmesg output, the X logs and the s2ram options will also be useful.

Tony



^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 16:11       ` Linus Torvalds
@ 2007-08-04 18:06         ` H. Peter Anvin
  2007-08-04 21:02           ` Antonino A. Daplas
  2007-08-05  2:37           ` Jeff Chua
  2007-08-05  2:29         ` Jeff Chua
  2007-08-05 12:04         ` Jeff Chua
  2 siblings, 2 replies; 39+ messages in thread
From: H. Peter Anvin @ 2007-08-04 18:06 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Jeff Chua, lkml, Antonino A. Daplas

Linus Torvalds wrote:
> 
> On Sat, 4 Aug 2007, Jeff Chua wrote:
>> On 8/4/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
>>>> After resume from s2ram or switching to console from X, my console is
>>>> messed up on rc1 and rc2. Is there a fix for this?
>>> This is on IBM X60. i915 chipset. No problem on 2.6.22. If this is a
>>> known problem, than I don't need to bisect all over again.
>> I managed to bisect down to this commit. Without this, console screen
>> can resume without video mess.
> 
> [ The commit being 4fd06960f120e02e9abc802a09f9511c400042a5: "Use the new 
>   x86 setup code for i386" ]
> 
> Very interesting. 
> 
> Jeff - do I understand correctly that the "or" means that even *without* a 
> suspend-to-ram sequence, and just by going into X and then going back to 
> text-mode, the screen is corrupt?

Also, can you please describe "messed up" in more detail?  We had one
report of "screen messed up" already that did get fixed
(CONFIG_FIRMWARE_EDID not working.)

Are you using the VGA console or a framebuffer console?

Also, please submit your .config and kernel command line.

	-=hpa

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04 13:52     ` Jeff Chua
@ 2007-08-04 16:11       ` Linus Torvalds
  2007-08-04 18:06         ` H. Peter Anvin
                           ` (2 more replies)
  0 siblings, 3 replies; 39+ messages in thread
From: Linus Torvalds @ 2007-08-04 16:11 UTC (permalink / raw)
  To: Jeff Chua; +Cc: lkml, H. Peter Anvin



On Sat, 4 Aug 2007, Jeff Chua wrote:
>
> On 8/4/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
> > 
> > > After resume from s2ram or switching to console from X, my console is
> > > messed up on rc1 and rc2. Is there a fix for this?
> >
> > This is on IBM X60. i915 chipset. No problem on 2.6.22. If this is a
> > known problem, than I don't need to bisect all over again.
> 
> I managed to bisect down to this commit. Without this, console screen
> can resume without video mess.

[ The commit being 4fd06960f120e02e9abc802a09f9511c400042a5: "Use the new 
  x86 setup code for i386" ]

Very interesting. 

Jeff - do I understand correctly that the "or" means that even *without* a 
suspend-to-ram sequence, and just by going into X and then going back to 
text-mode, the screen is corrupt?

I just want to make sure that there is no suspend-related activity 
required for this at all, and the only common issue is probably just that 
suspend ends up *also* triggering the X mode-setting at resume..

If so, the most likely thing is that we use a different video mode at 
boot, and while it may look similar, it's enough to confuse X. Not 
entirely surprising: X tends to be easily confused, and some VGA registers 
are write-only, so restoring modes can be surprisingly hard.

The other possibility is that the new code sets the same mode, but doesn't 
set some memory value or other that the kernel used to see, and that X 
queried to figure out the mode (ie likely some EDD info-block or other). I 
thought that the X server did all that on its own these days, but that may 
be just the newer "intel" driver, not the older "i810" driver that you 
probably use.

(Side note: if you have a modern distro, you might try to change the line 
that says

	Driver "i810"

in the /etc/X11/xorg.conf to say

	Driver "intel"

instead - just to check. However, the bug that triggered this 
obviously needs to be fixed regardless).

Peter, any ideas?

		Linus

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04  5:34   ` Jeff Chua
@ 2007-08-04 13:52     ` Jeff Chua
  2007-08-04 16:11       ` Linus Torvalds
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-04 13:52 UTC (permalink / raw)
  To: Linus Torvalds, lkml, H. Peter Anvin

On 8/4/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:

> > After resume from s2ram or switching to console from X, my console is
> > messed up on rc1 and rc2. Is there a fix for this?
>
> This is on IBM X60. i915 chipset. No problem on 2.6.22. If this is a
> known problem, than I don't need to bisect all over again.

I managed to bisect down to this commit. Without this, console screen
can resume without video mess.

Thanks,
Jeff.

4fd06960f120e02e9abc802a09f9511c400042a5 is first bad commit
commit 4fd06960f120e02e9abc802a09f9511c400042a5
Author: H. Peter Anvin <hpa@zytor.com>
Date:   Wed Jul 11 12:18:56 2007 -0700

    Use the new x86 setup code for i386

    This patch hooks the new x86 setup code into the Makefile machinery.  It
    also adapts boot/tools/build.c to a two-file (as opposed to three-file)
    universe, and simplifies it substantially.

    Signed-off-by: H. Peter Anvin <hpa@zytor.com>
    Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

:040000 040000 6560eb5b7e40d93813276544bced8c478f9067f5
fe5f90d9ca08e526559815789175602ba2c51743 M      arch

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04  3:50 Linus Torvalds
  2007-08-04  4:14 ` david
  2007-08-04  5:13 ` Jeff Chua
@ 2007-08-04 10:30 ` Rafael J. Wysocki
  2007-08-04 22:15   ` Rafael J. Wysocki
  2 siblings, 1 reply; 39+ messages in thread
From: Rafael J. Wysocki @ 2007-08-04 10:30 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List, Andrew Morton

On Saturday, 4 August 2007 05:50, Linus Torvalds wrote:
> 
> So I tried to hold people to the merge window, and said no to a few pull 
> requests, but this whole "-rc2 is the new -rc1" thing is a disease, and 
> not only is -rc2 late, it's bigger than it should be. Oh, well.

Suspend and hibernation are busted on SMP x86_64, AFAICS.  My test boxes
don't resume.

2.6.23-rc1 and 2.6.23-rc1-mm2 both work just fine on the same machines, so
this has to be due to a recent change.  I'll bisect later today.

Greetings,
Rafael


-- 
"Premature optimization is the root of all evil." - Donald Knuth

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04  5:13 ` Jeff Chua
@ 2007-08-04  5:34   ` Jeff Chua
  2007-08-04 13:52     ` Jeff Chua
  0 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-04  5:34 UTC (permalink / raw)
  To: Linus Torvalds, lkml

On 8/4/07, Jeff Chua <jeff.chua.linux@gmail.com> wrote:
> On 8/4/07, Linus Torvalds <torvalds@linux-foundation.org> wrote:

> After resume from s2ram or switching to console from X, my console is
> messed up on rc1 and rc2. Is there a fix for this?

This is on IBM X60. i915 chipset. No problem on 2.6.22. If this is a
known problem, than I don't need to bisect all over again.

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04  3:50 Linus Torvalds
  2007-08-04  4:14 ` david
@ 2007-08-04  5:13 ` Jeff Chua
  2007-08-04  5:34   ` Jeff Chua
  2007-08-04 10:30 ` Rafael J. Wysocki
  2 siblings, 1 reply; 39+ messages in thread
From: Jeff Chua @ 2007-08-04  5:13 UTC (permalink / raw)
  To: Linus Torvalds, lkml

On 8/4/07, Linus Torvalds <torvalds@linux-foundation.org> wrote:

> A lot of the changes are small, and a lot of them really are fixes, but
> there's a MIPS merge in there too, and some absolutely _huge_ diffs due to
> some drivers undergoing Lindent cleanups (28 _thousand_ lines changes in
> advansys.c, and the PNP files got Lindented too, although those weren't
> nearly as big).

After resume from s2ram or switching to console from X, my console is
messed up on rc1 and rc2. Is there a fix for this?

Thanks,
Jeff.

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Re: Linux 2.6.23-rc2
  2007-08-04  3:50 Linus Torvalds
@ 2007-08-04  4:14 ` david
  2007-08-04  5:13 ` Jeff Chua
  2007-08-04 10:30 ` Rafael J. Wysocki
  2 siblings, 0 replies; 39+ messages in thread
From: david @ 2007-08-04  4:14 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Linux Kernel Mailing List

On Fri, 3 Aug 2007, Linus Torvalds wrote:

> So I tried to hold people to the merge window, and said no to a few pull
> requests, but this whole "-rc2 is the new -rc1" thing is a disease, and
> not only is -rc2 late, it's bigger than it should be. Oh, well.

I don't think this is new, -rc1 has always been a mid-merge sync point as 
much as (or more then) a release candidate. I can't think of any -rc2s 
that haven't included fairly significant merges since -rc1. now some of 
the -rc1s have been more useable then others, and this series does look 
like it's going to be rougher and longer then most (due in large part to 
the scheduler changes), but it's more a difference in degree then in type.

David Lang

^ permalink raw reply	[flat|nested] 39+ messages in thread

* Linux 2.6.23-rc2
@ 2007-08-04  3:50 Linus Torvalds
  2007-08-04  4:14 ` david
                   ` (2 more replies)
  0 siblings, 3 replies; 39+ messages in thread
From: Linus Torvalds @ 2007-08-04  3:50 UTC (permalink / raw)
  To: Linux Kernel Mailing List


So I tried to hold people to the merge window, and said no to a few pull 
requests, but this whole "-rc2 is the new -rc1" thing is a disease, and 
not only is -rc2 late, it's bigger than it should be. Oh, well.

A lot of the changes are small, and a lot of them really are fixes, but 
there's a MIPS merge in there too, and some absolutely _huge_ diffs due to 
some drivers undergoing Lindent cleanups (28 _thousand_ lines changes in 
advansys.c, and the PNP files got Lindented too, although those weren't 
nearly as big).

But if you ignore the Lindent changes, the MIPS merge, the lguest 
documentation updates, and the MPT fusion driver changes, and the 
removal of the broken arm26 support, the rest of the changes really aren't 
that big.

But there's still a lot of those mostly small things all over. And the 
ShortLog is too large to post. But the full log along with the customary 
tar-balls and patches are out there on kernel.org. And as usual, the git 
tree gives you the goods if you just do

	git shortlog v2.6.23-rc1..

(the most interesting statistic from there is that we apparently had more 
than 250 people involved in just the -rc1 to -rc2 timeframe. Impressively 
spread out, in other words)

			Linus

^ permalink raw reply	[flat|nested] 39+ messages in thread

end of thread, other threads:[~2007-08-08  2:46 UTC | newest]

Thread overview: 39+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-08-05 12:11 Linux 2.6.23-rc2 Jeff Chua
2007-08-05 12:40 ` Antonino A. Daplas
2007-08-05 13:26   ` Jeff Chua
2007-08-05 16:47     ` Rafael J. Wysocki
2007-08-06  0:36       ` Jeff Chua
2007-08-06 11:26         ` Rafael J. Wysocki
2007-08-06 12:34           ` Jeff Chua
2007-08-06 16:40           ` H. Peter Anvin
2007-08-06 19:17             ` [Suspend-devel] " Rafael J. Wysocki
2007-08-06 15:40     ` Jan Engelhardt
2007-08-06 16:06       ` Jeff Chua
2007-08-06 16:34         ` Jan Engelhardt
2007-08-06 16:46         ` Indan Zupancic
2007-08-06 17:16           ` H. Peter Anvin
2007-08-06 17:32             ` Indan Zupancic
2007-08-06 17:33               ` H. Peter Anvin
2007-08-06 22:53                 ` Jeff Chua
2007-08-06 22:54                   ` H. Peter Anvin
2007-08-06 22:57                     ` Jeff Chua
2007-08-06 23:00                       ` H. Peter Anvin
2007-08-06 22:48           ` Jeff Chua
  -- strict thread matches above, loose matches on Subject: below --
2007-08-06 23:20 Jeff Chua
2007-08-04  3:50 Linus Torvalds
2007-08-04  4:14 ` david
2007-08-04  5:13 ` Jeff Chua
2007-08-04  5:34   ` Jeff Chua
2007-08-04 13:52     ` Jeff Chua
2007-08-04 16:11       ` Linus Torvalds
2007-08-04 18:06         ` H. Peter Anvin
2007-08-04 21:02           ` Antonino A. Daplas
2007-08-05  2:37           ` Jeff Chua
2007-08-05  3:11             ` H. Peter Anvin
2007-08-05 11:52               ` Jeff Chua
2007-08-07 17:05                 ` David Weinehall
2007-08-08  2:46                   ` Jeff Chua
2007-08-05  2:29         ` Jeff Chua
2007-08-05 12:04         ` Jeff Chua
2007-08-04 10:30 ` Rafael J. Wysocki
2007-08-04 22:15   ` Rafael J. Wysocki

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).