LKML Archive on
 help / color / Atom feed
From: "Ahmed S. Darwish" <>
To: Dmitri Vorobiev <>
Subject: Re: [PATCH] NTFS error messages: replace static char pointers by static char arrays
Date: Tue, 9 Oct 2007 14:40:35 +0200
Message-ID: <20071009124035.GA4245@Ahmed> (raw)
In-Reply-To: <>

On Tue, Oct 09, 2007 at 01:55:42AM +0400, Dmitri Vorobiev wrote:
> Hi,
> The patch below contains a small code clean-up for the NTFS driver: all
> static char pointers to error message strings have been replaced by 
> static char arrays.

Hi Dmitri,

Isn't the only difference between char *c = "msg" and char c[] = "msg" is 
that the first is a non-const pointer to a const char array while the second 
is a modifiable char array ?

If so, what's the point of the patch ?


Ahmed S. Darwish

  reply index

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2007-10-08 21:55 Dmitri Vorobiev
2007-10-09 12:40 ` Ahmed S. Darwish [this message]
2007-10-09 18:33   ` Philipp Matthias Hahn
2007-10-09 22:03     ` Ahmed S. Darwish
2007-10-09 18:45   ` Dmitri Vorobiev
2007-10-13 22:00     ` Folkert van Heusden

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20071009124035.GA4245@Ahmed \ \ \ \ \ \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on

Archives are clonable:
	git clone --mirror lkml/git/0.git
	git clone --mirror lkml/git/1.git
	git clone --mirror lkml/git/2.git
	git clone --mirror lkml/git/3.git
	git clone --mirror lkml/git/4.git
	git clone --mirror lkml/git/5.git
	git clone --mirror lkml/git/6.git
	git clone --mirror lkml/git/7.git
	git clone --mirror lkml/git/8.git
	git clone --mirror lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ \
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:

AGPL code for this site: git clone