LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Andrew Morton <akpm@linux-foundation.org>
To: Russell King <rmk+lkml@arm.linux.org.uk>
Cc: linux-kernel@vger.kernel.org, alan@lxorguk.ukuu.org.uk,
	"Rafael J. Wysocki" <rjw@sisk.pl>
Subject: Re: [PATCH: 2/2] [SERIAL] avoid stalling suspend if serial port won't drain
Date: Tue, 8 Jan 2008 16:06:10 -0800	[thread overview]
Message-ID: <20080108160610.53694773.akpm@linux-foundation.org> (raw)
In-Reply-To: <20080108115703.GA27179@flint.arm.linux.org.uk>

On Tue, 8 Jan 2008 11:57:03 +0000
Russell King <rmk+lkml@arm.linux.org.uk> wrote:

> Some ports seem to be unable to drain their transmitters on shut down.
> Such a problem can occur if the port is programmed for hardware imposed
> flow control, characters are in the FIFO but the CTS signal is inactive.
> 
> Normally, this isn't a problem because most places where we wait for the
> transmitter to drain have a time-out.  However, there is no timeout in
> the suspend path.
> 
> Give a port 30ms to drain; this is an arbitary value chosen to avoid
> long delays if there are many such ports in the system, while giving a
> reasonable chance for a single port to drain.  Should a port not drain
> within this timeout, issue a warning.
> 
> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
> 
> diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
> index 3bb5d24..4ce219c 100644
> --- a/drivers/serial/serial_core.c
> +++ b/drivers/serial/serial_core.c
> @@ -1977,6 +1977,7 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
>  
>  	if (state->info && state->info->flags & UIF_INITIALIZED) {
>  		const struct uart_ops *ops = port->ops;
> +		int tries;
>  
>  		state->info->flags = (state->info->flags & ~UIF_INITIALIZED)
>  				     | UIF_SUSPENDED;
> @@ -1990,9 +1991,14 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port)
>  		/*
>  		 * Wait for the transmitter to empty.
>  		 */
> -		while (!ops->tx_empty(port)) {
> +		for (tries = 3; !ops->tx_empty(port) && tries; tries--) {
>  			msleep(10);
>  		}
> +		if (!tries)
> +			printk(KERN_ERR "%s%s%s%d: Unable to drain transmitter\n",
> +			       port->dev ? port->dev->bus_id : "",
> +			       port->dev ? ": " : "",
> +			       drv->dev_name, port->line);
>  
>  		ops->shutdown(port);
>  	}
> 

One hopes that doing a printk from within uart_suspend_port() will dtrt if
that port is (was?) being used as a console.



  reply	other threads:[~2008-01-09  0:06 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-01-08 11:51 [PATCH: 1/2] [SERIAL] avoid waking up closed serial ports on resume Russell King
2008-01-08 11:57 ` [PATCH: 2/2] [SERIAL] avoid stalling suspend if serial port won't drain Russell King
2008-01-09  0:06   ` Andrew Morton [this message]
2008-01-09  1:29     ` Alan Cox
2008-01-09  8:34     ` Russell King
2008-01-11 10:17   ` Pavel Machek
2008-01-13 22:51     ` nigel
2008-01-14  0:49       ` Alan Cox
2008-01-14  2:40         ` nigel
2008-01-14 10:04           ` Russell King
2008-01-14  9:46         ` Russell King
2008-01-13 22:56     ` Benjamin Herrenschmidt
2008-01-14  0:29     ` Russell King
2008-01-14  9:04       ` Pavel Machek
2008-01-14  9:35         ` Russell King
2008-01-14 10:21           ` Alan Cox

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080108160610.53694773.akpm@linux-foundation.org \
    --to=akpm@linux-foundation.org \
    --cc=alan@lxorguk.ukuu.org.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rjw@sisk.pl \
    --cc=rmk+lkml@arm.linux.org.uk \
    --subject='Re: [PATCH: 2/2] [SERIAL] avoid stalling suspend if serial port won'\''t drain' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).