LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.24-rc7-rt2
@ 2008-01-14 18:41 Steven Rostedt
  2008-01-14 20:02 ` 2.6.24-rc7-rt2 Mark Knecht
                   ` (4 more replies)
  0 siblings, 5 replies; 30+ messages in thread
From: Steven Rostedt @ 2008-01-14 18:41 UTC (permalink / raw)
  To: LKML, RT; +Cc: Ingo Molnar, Thomas Gleixner

We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
downloaded from the location:

  http://rt.et.redhat.com/download/

Information on the RT patch can be found at:

  http://rt.wiki.kernel.org/index.php/Main_Page

Changes since 2.6.24-rc7-rt1

  - Several merge fixes reported by:
	Mariusz Kozloski

  - Removal of kvm-rt.patch (it's so old it is now bogus)

  - PPC compile fix (reported by: Robert Schwebel)

  - Remove of running softirq by hardirq (too dangerous)

  - Changed BUG_ON in filemap from atomic to pagefault disabled
       (Steven Rostedt)

Note: There are still some fixes that are not incorporated here yet.


to build a 2.6.24-rc7-rt2 tree, the following patches should be applied:

  http://www.kernel.org/pub/linux/kernel/v2.6/linux-2.6.23.tar.bz2
  http://www.kernel.org/pub/linux/kernel/v2.6/testing/patch-2.6.24-rc7.bz2
  http://rt.et.redhat.com/download/patch-2.6.24-rc7-rt2.bz2


And like always, my RT version of Matt Mackall's ketchup will get this
for you nicely:

  http://people.redhat.com/srostedt/rt/tools/ketchup-0.9.8-rt3


The broken out patches are also available.

-- Steve




^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-14 18:41 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-14 20:02 ` Mark Knecht
  2008-01-14 22:16 ` 2.6.24-rc7-rt2 Mariusz Kozlowski
                   ` (3 subsequent siblings)
  4 siblings, 0 replies; 30+ messages in thread
From: Mark Knecht @ 2008-01-14 20:02 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

On Jan 14, 2008 10:41 AM, Steven Rostedt <rostedt@goodmis.org> wrote:
> We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
> downloaded from the location:
>

Up and running here:

mark@lightning ~ $ uname -a
Linux lightning 2.6.24-rc7-rt2 #1 PREEMPT RT Mon Jan 14 11:18:04 PST
2008 x86_64 AMD Athlon(tm) 64 Processor 3000+ AuthenticAMD GNU/Linux
mark@lightning ~ $

I must learn how to use some of the test tools so I can do better
testing for you guys. I see no problems in dmesg but in
/var/log/messages I spotted this:

Jan 14 11:56:54 lightning sshd[5915]: Server listening on :: port 22.
Jan 14 11:56:54 lightning sshd[5915]: error: Bind to port 22 on
0.0.0.0 failed: Address already in use.

Scanning back through /var/log/messages I don't see that in earlier kernels.

- Mark

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-14 18:41 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-14 20:02 ` 2.6.24-rc7-rt2 Mark Knecht
@ 2008-01-14 22:16 ` Mariusz Kozlowski
  2008-01-14 22:30   ` 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-15  0:37 ` 2.6.24-rc7-rt2 S.Çağlar Onur
                   ` (2 subsequent siblings)
  4 siblings, 1 reply; 30+ messages in thread
From: Mariusz Kozlowski @ 2008-01-14 22:16 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 956 bytes --]

Hello,

> We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
> downloaded from the location:
> 
>   http://rt.et.redhat.com/download/

Compiles fine but I run into another problem. On startup kernel oopses
early and this 'oops' loops over and over again on the screen until you
shut down the box. So I can't (easily) capture the output. I tried different
boot_delay values but it seems that it doesn't work as intended. Seems that
it delays only the first printk from oops, then the rest loops over the screen
without delay - again it becomes unreadable. I used my usual config with a bunch
of debug options enabled so that maybe is not real rt system case. Also tried to
bisect it with quilt but that is hard. Lots of patches depends on another patches
so bisection brakes things. I'll look into this tommorow and reply if I get
anything substantial.

I attached my config in case anybody wants to try to reproduce that.

Regards,

	Mariusz

[-- Attachment #2: .config --]
[-- Type: text/plain, Size: 41179 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.24-rc7-rt2
# Mon Jan 14 20:54:36 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_ASM_SEMAPHORES=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_SUPPORTS_OPROFILE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
# CONFIG_CGROUPS is not set
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_FAIR_USER_SCHED=y
# CONFIG_FAIR_CGROUP_SCHED is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_RADIX_TREE_CONCURRENT is not set
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_SMP is not set
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
# CONFIG_X86_GENERIC is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
# CONFIG_HPET_TIMER is not set
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT_DESKTOP is not set
CONFIG_PREEMPT_RT=y
CONFIG_PREEMPT=y
CONFIG_PREEMPT_SOFTIRQS=y
CONFIG_PREEMPT_HARDIRQS=y
CONFIG_PREEMPT_BKL=y
# CONFIG_CLASSIC_RCU is not set
CONFIG_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU_BOOST=y
CONFIG_RCU_TRACE=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
# CONFIG_X86_MCE_P4THERMAL is not set
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
# CONFIG_X86_REBOOTFIXUPS is not set
# CONFIG_MICROCODE is not set
# CONFIG_X86_MSR is not set
# CONFIG_X86_CPUID is not set
CONFIG_NOHIGHMEM=y
# CONFIG_HIGHMEM4G is not set
# CONFIG_HIGHMEM64G is not set
CONFIG_PAGE_OFFSET=0xC0000000
# CONFIG_X86_PAE is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_RESOURCES_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
# CONFIG_KEXEC is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_COMPAT_VDSO is not set
CONFIG_HARDIRQS_SW_RESEND=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
CONFIG_SUSPEND_UP_POSSIBLE=y
# CONFIG_SUSPEND is not set
CONFIG_HIBERNATION_UP_POSSIBLE=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_PROC_EVENT is not set
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
CONFIG_ACPI_SBS=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_PCCARD=y
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
CONFIG_PCMCIA_PROBE=y
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_MISC=y

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
# CONFIG_INET_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
CONFIG_CFG80211=y
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=y
CONFIG_MAC80211_RCSIMPLE=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
# CONFIG_PARPORT_1284 is not set
CONFIG_PARPORT_NOT_PC=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
# CONFIG_ISAPNP is not set
# CONFIG_PNPBIOS is not set
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=m
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
# CONFIG_BLK_DEV_RAM is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_MISC_DEVICES is not set
CONFIG_TIFM_CORE=m
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
# CONFIG_IDEPCI_SHARE_IRQ is not set
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
# CONFIG_IDE_ARM is not set

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
# CONFIG_SCSI_SPI_ATTRS is not set
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#
CONFIG_FIREWIRE=m
# CONFIG_FIREWIRE_OHCI is not set
# CONFIG_FIREWIRE_SBP2 is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#

#
# Texas Instruments PCILynx requires I2C
#
# CONFIG_IEEE1394_OHCI1394 is not set

#
# Protocols
#
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_RAWIO is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_IP1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_NET_VENDOR_RACAL is not set
# CONFIG_NET_TULIP is not set
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
# CONFIG_NETDEV_1000 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_AIRO is not set
CONFIG_HERMES=m
# CONFIG_PLX_HERMES is not set
# CONFIG_TMD_HERMES is not set
# CONFIG_NORTEL_HERMES is not set
# CONFIG_PCI_HERMES is not set
CONFIG_PCMCIA_HERMES=m
# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_BCM43XX is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=y
# CONFIG_PPP_MULTILINK is not set
# CONFIG_PPP_FILTER is not set
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
# CONFIG_PPPOL2TP is not set
# CONFIG_SLIP is not set
CONFIG_SLHC=y
# CONFIG_NET_FC is not set
# CONFIG_SHAPER is not set
CONFIG_NETCONSOLE=m
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set

#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
CONFIG_FIX_EARLYCON_MEM=y

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
CONFIG_RTC=m
# CONFIG_RTC_HISTOGRAM is not set
# CONFIG_BLOCKER is not set
CONFIG_LPPTEST=m
# CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_SONYPI=m

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_HPET is not set
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_RMEM=m
CONFIG_ALLOC_RTSJ_MEM=m
CONFIG_DEVPORT=y
# CONFIG_I2C is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
# CONFIG_HWMON is not set
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=y
# CONFIG_AGP_ALI is not set
CONFIG_AGP_ATI=y
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
# CONFIG_AGP_VIA is not set
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=y
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
CONFIG_DRM_RADEON=y
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_RTCTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
# CONFIG_SND_SUPPORT_OLD_API is not set
# CONFIG_SND_VERBOSE_PROCFS is not set
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=y
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
# CONFIG_SND_PORTMAN2X4 is not set

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
# CONFIG_SND_WAVEFRONT is not set

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
CONFIG_SND_ALI5451=y
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# PCMCIA devices
#
# CONFIG_SND_VXPOCKET is not set
# CONFIG_SND_PDAUDIOCF is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# SoC Audio support for SuperH
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
CONFIG_USB_PERSIST=y
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_SPLIT_ISO=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_ISP116X_HCD=m
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
CONFIG_USB_U132_HCD=m
CONFIG_USB_SL811_HCD=m
CONFIG_USB_SL811_CS=m
CONFIG_USB_R8A66597_HCD=m

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_MICROTEK=m
# CONFIG_USB_MON is not set

#
# USB port drivers
#
CONFIG_USB_USS720=m

#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
# CONFIG_USB_SERIAL_GENERIC is not set
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_CP2101=m
CONFIG_USB_SERIAL_CYPRESS_M8=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_FUNSOFT=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KEYSPAN_MPR is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XA is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA28XB is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19 is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA18X is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QW is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA19QI is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49W is not set
# CONFIG_USB_SERIAL_KEYSPAN_USA49WLC is not set
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
CONFIG_USB_SERIAL_NAVMAN=m
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
CONFIG_USB_SERIAL_HP4X=m
CONFIG_USB_SERIAL_SAFE=m
# CONFIG_USB_SERIAL_SAFE_PADDED is not set
CONFIG_USB_SERIAL_SIERRAWIRELESS=m
CONFIG_USB_SERIAL_TI=m
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_SERIAL_DEBUG=m
CONFIG_USB_EZUSB=y

#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI62=m
CONFIG_USB_EMI26=m
CONFIG_USB_ADUTUX=m
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
CONFIG_USB_LED=m
CONFIG_USB_CYPRESS_CY7C63=m
# CONFIG_USB_CYTHERM is not set
CONFIG_USB_PHIDGET=m
CONFIG_USB_PHIDGETKIT=m
CONFIG_USB_PHIDGETMOTORCONTROL=m
CONFIG_USB_PHIDGETSERVO=m
CONFIG_USB_IDMOUSE=m
CONFIG_USB_FTDI_ELAN=m
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
CONFIG_USB_LD=m
# CONFIG_USB_TRANCEVIBRATOR is not set
CONFIG_USB_IOWARRIOR=m
# CONFIG_USB_TEST is not set

#
# USB DSL modem support
#

#
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_NEW_LEDS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_VIRTUALIZATION is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
# CONFIG_DMIID is not set

#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_FS_XATTR is not set
CONFIG_EXT4DEV_FS=m
# CONFIG_EXT4DEV_FS_XATTR is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=m
# CONFIG_JBD2_DEBUG is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=1250
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-2"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp1250"
# CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-2"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
# CONFIG_INSTRUMENTATION is not set
CONFIG_MARKERS=y

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
CONFIG_DEBUG_RT_MUTEXES=y
CONFIG_DEBUG_PI_LIST=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCKDEP=y
CONFIG_LOCK_STAT=y
CONFIG_DEBUG_LOCKDEP=y
CONFIG_TRACE_IRQFLAGS=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
CONFIG_DEBUG_LOCKING_API_SELFTESTS=y
CONFIG_STACKTRACE=y
CONFIG_PREEMPT_TRACE=y
# CONFIG_EVENT_TRACE is not set
# CONFIG_FUNCTION_TRACE is not set
# CONFIG_WAKEUP_TIMING is not set
# CONFIG_CRITICAL_PREEMPT_TIMING is not set
# CONFIG_CRITICAL_IRQSOFF_TIMING is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
CONFIG_DEBUG_LIST=y
CONFIG_DEBUG_SG=y
CONFIG_FRAME_POINTER=y
# CONFIG_FORCED_INLINING is not set
CONFIG_BOOT_PRINTK_DELAY=y
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_HAVE_MCOUNT=y
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_DEBUG_RODATA=y
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_MANAGER=y
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=y
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_TWOFISH_586 is not set
# CONFIG_CRYPTO_SERPENT is not set
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_586 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_DEFLATE is not set
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_HW is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-14 22:16 ` 2.6.24-rc7-rt2 Mariusz Kozlowski
@ 2008-01-14 22:30   ` Steven Rostedt
  2008-01-15 17:10     ` 2.6.24-rc7-rt2 Mariusz Kozlowski
  0 siblings, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-14 22:30 UTC (permalink / raw)
  To: Mariusz Kozlowski; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner


On Mon, 14 Jan 2008, Mariusz Kozlowski wrote:

> Hello,
>
> > We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
> > downloaded from the location:
> >
> >   http://rt.et.redhat.com/download/
>
> Compiles fine but I run into another problem. On startup kernel oopses
> early and this 'oops' loops over and over again on the screen until you
> shut down the box. So I can't (easily) capture the output. I tried different
> boot_delay values but it seems that it doesn't work as intended. Seems that
> it delays only the first printk from oops, then the rest loops over the screen
> without delay - again it becomes unreadable. I used my usual config with a bunch
> of debug options enabled so that maybe is not real rt system case. Also tried to
> bisect it with quilt but that is hard. Lots of patches depends on another patches
> so bisection brakes things. I'll look into this tommorow and reply if I get
> anything substantial.
>
> I attached my config in case anybody wants to try to reproduce that.
>

Turn off LOCKDEP and see if you still have the same problems. This might
be fixed with Daniel's patch.

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-14 18:41 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-14 20:02 ` 2.6.24-rc7-rt2 Mark Knecht
  2008-01-14 22:16 ` 2.6.24-rc7-rt2 Mariusz Kozlowski
@ 2008-01-15  0:37 ` S.Çağlar Onur
  2008-01-16  3:50   ` 2.6.24-rc7-rt2 Valdis.Kletnieks
  2008-01-16  4:01   ` 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-15  3:44 ` 2.6.24-rc7-rt2: WARNING: at include/linux/rcupreempt.h:110 rcu_enter_nohz() Mike Galbraith
  2008-01-15 16:27 ` 2.6.24-rc7-rt2 Luotao Fu
  4 siblings, 2 replies; 30+ messages in thread
From: S.Çağlar Onur @ 2008-01-15  0:37 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 1740 bytes --]

Hi;

14 Oca 2008 Pts tarihinde, Steven Rostedt şunları yazmıştı: 
> We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
> downloaded from the location:
[...]
> The broken out patches are also available.

2.6.24-rc7-rt2 (-rt2 patchset on top of Linus's current git commit 
031f2dcd7075e218e74dd7f942ad015cf82dffab) starts to complain like following 
(full dmesg can be found @ [1]) when try to login from console (the other 
acpi related errors also existed in 2.6.24-rc5-rt1) and FYI, plain 2.6.24-rc7 
(again commit 031f2dcd7075e218e74dd7f942ad015cf82dffab) has no issues.

[...]
sysfs: duplicate filename 'vcs1' can not be created
WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
Pid: 1298, comm: mingetty Not tainted 2.6.24-rc7-rt2-99 #1
[...]

And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch, closed 
source nvidia-new module cannot be used with this release (mcount is exported 
GPL only), i know this is not supported but i used it with that [2] patch up 
until now without a single problem. 

Please don't misunderstand this, i really do not want to start a discussion 
for this, i just want to ask the possibility of converting this into 
EXPORT_SYMBOL cause i thought some of the possible -rt users may need this 
closed source module explicitly because of its 3D performance. 

If anything else needed for sysfs warnings please just say it...

[1] http://cekirdek.pardus.org.tr/~caglar/dmesg.rt
[2] 
http://svn.pardus.org.tr/pardus/devel/kernel/drivers/nvidia-new/files/rt.patch

Cheers
-- 
S.Çağlar Onur <caglar@pardus.org.tr>
http://cekirdek.pardus.org.tr/~caglar/

Linux is like living in a teepee. No Windows, no Gates and an Apache in house!

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2: WARNING: at include/linux/rcupreempt.h:110 rcu_enter_nohz()
  2008-01-14 18:41 2.6.24-rc7-rt2 Steven Rostedt
                   ` (2 preceding siblings ...)
  2008-01-15  0:37 ` 2.6.24-rc7-rt2 S.Çağlar Onur
@ 2008-01-15  3:44 ` Mike Galbraith
  2008-01-15 16:27 ` 2.6.24-rc7-rt2 Luotao Fu
  4 siblings, 0 replies; 30+ messages in thread
From: Mike Galbraith @ 2008-01-15  3:44 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

Greetings,

I receive $subject upon every resume.

[  115.223202] CPU1 is down
[    3.725918] Intel machine check architecture supported.
[    3.725925] Intel machine check reporting enabled on CPU#0.
[    3.725927] CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
[    3.725930] CPU0: Thermal monitoring enabled
[    3.725936] Back to C!
[    3.726468] Force enabled HPET at resume
[    3.726532] Enabling non-boot CPUs ...
[    3.726796] CPU0 attaching NULL sched-domain.
[    3.726912] SMP alternatives: switching to SMP code
[    3.727602] Booting processor 1/1 eip 3000
[    3.727605] CPU 1 irqstacks, hard=b042d000 soft=b042b000
[    3.737950] Initializing CPU#1
[    3.798694] Calibrating delay using timer specific routine.. 5986.21 BogoMIPS (lpj=2993108)
[    3.798703] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000 00000000
[    3.798714] CPU: Trace cache: 12K uops, L1 D cache: 8K
[    3.798717] CPU: L2 cache: 512K
[    3.798719] CPU: Physical Processor ID: 0
[    3.798721] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000 00000000
[    3.798729] Intel machine check architecture supported.
[    3.798734] Intel machine check reporting enabled on CPU#1.
[    3.798738] CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
[    3.798741] CPU1: Thermal monitoring enabled
[    3.798893] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
[    3.798916] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    3.818995] CPU0 attaching sched-domain:
[    3.819000]  domain 0: span 3
[    3.819002]   groups: 1 2
[    3.819006]   domain 1: span 3
[    3.819009]    groups: 3
[    3.819013] CPU1 attaching sched-domain:
[    3.819016]  domain 0: span 3
[    3.819018]   groups: 2 1
[    3.819020]   domain 1: span 3
[    3.819021]    groups: 3
[    3.819615] CPU1 is up
[    3.820379] ACPI: Unable to turn cooling device [ef83ab80] 'off'
[    3.820424] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was 22a0a0a0, writing 2a0a0a0)
[    3.820444] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
[    3.820450] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.820481] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
[    3.820487] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.820517] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
[    3.820523] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    3.820553] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
[    3.820558] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    3.820614] BUG: bad accounting of dynamic ticks
[    3.820616]    will try to fix, but it is best to reboot
[    3.820618] WARNING: at include/linux/rcupreempt.h:110 rcu_enter_nohz()
[    3.820621] Pid: 0, comm: swapper Not tainted 2.6.24-rt2-smp #64
[    3.820624]  [<b010522a>] show_trace_log_lvl+0x1a/0x30
[    3.820631]  [<b0105ccd>] show_trace+0x12/0x14
[    3.820634]  [<b010641f>] dump_stack+0x6c/0x72
[    3.820637]  [<b0148f10>] tick_nohz_stop_sched_tick+0x2fa/0x30c
[    3.820641]  [<b010256d>] cpu_idle+0x27/0xd2
[    3.820644]  [<b0116f01>] start_secondary+0x19f/0x1a5
[    3.820648]  [<00000000>] 0x0
[    3.820661]  =======================



^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-14 18:41 2.6.24-rc7-rt2 Steven Rostedt
                   ` (3 preceding siblings ...)
  2008-01-15  3:44 ` 2.6.24-rc7-rt2: WARNING: at include/linux/rcupreempt.h:110 rcu_enter_nohz() Mike Galbraith
@ 2008-01-15 16:27 ` Luotao Fu
  2008-01-15 18:06   ` 2.6.24-rc7-rt2 Steven Rostedt
  4 siblings, 1 reply; 30+ messages in thread
From: Luotao Fu @ 2008-01-15 16:27 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 2655 bytes --]

Hi,

On Mon, Jan 14, 2008 at 01:41:20PM -0500, Steven Rostedt wrote:
> We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
> downloaded from the location:
> 
>   http://rt.et.redhat.com/download/
> 
.......... 
> Changes since 2.6.24-rc7-rt1
> 
 
..........
>   - PPC compile fix (reported by: Robert Schwebel)
> 

Compiling with tracing function turned seemed still to be broken to me:
kernel/built-in.o: In function `early_printk_name':
latency_trace.c:(.text+0x3cd18): undefined reference to `early_printk'
latency_trace.c:(.text+0x3cd40): undefined reference to `early_printk'
kernel/built-in.o: In function `early_print_entry':
latency_trace.c:(.text+0x3cd80): undefined reference to `early_printk'
latency_trace.c:(.text+0x3cdd8): undefined reference to `early_printk'
latency_trace.c:(.text+0x3cdfc): undefined reference to `early_printk'

We made a early_printk patch based on the 8250_early for powerpc 32bit here.
(still absolutely untested and incomplete, we will post it asap). I added
early_printk() and exported _mcount() and could compile succesfully. However the
kernel will not boot. I attached a bdi to it and found out that it stucks at
_mcount in arch/powerpc/kernel/entry_32.S at about line 1080, where the variable
mcount_enabled is loaded and checked. Obviously the variable is still not valid
at the time of check. To check this I took out the lines like above

--- arch/powerpc/kernel/entry_32.S.orig 2008-01-15 17:01:25.000000000 +0100
+++ arch/powerpc/kernel/entry_32.S      2008-01-15 17:17:18.000000000 +0100
@@ -1075,9 +1075,6 @@
        stw     r6, 24(r1)
        mflr    r3      /* will use as first arg to __trace() */
        mfcr    r4
-       lis     r5,mcount_enabled@ha
-       lwz     r5,mcount_enabled@l(r5)
-       cmpwi   r5,0
        stw     r3, 44(r1)      /* lr */
        stw     r4,  8(r1)      /* cr */
        stw     r7, 28(r1)

After recompiling the kernel started normally and it seems to work. I was even
able to make a trace with cyclictest. However there were several crashes (which
might be caused by other problems). I still have to take a closer look.

I am just wondering why the check for mcount_enabled is there at all and I think
that there due to be some better fixes than just throw it out ;-). On the other
side, I just can't find in which way mcount_enabled is used in the tracer at
all. Could you give me some hints on this one?

cheers
Luotao Fu
-- 
   Dipl.-Ing. Luotao Fu | Phone: +49-5121-206917-3
Pengutronix - Linux Solutions for Science and Industry
Entwicklungszentrum Nord     http://www.pengutronix.de


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-14 22:30   ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-15 17:10     ` Mariusz Kozlowski
  2008-01-17  2:07       ` 2.6.24-rc7-rt2 Steven Rostedt
  0 siblings, 1 reply; 30+ messages in thread
From: Mariusz Kozlowski @ 2008-01-15 17:10 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

> > > We are pleased to announce the 2.6.24-rc7-rt2 tree, which can be
> > > downloaded from the location:
> > >
> > >   http://rt.et.redhat.com/download/
> >
> > Compiles fine but I run into another problem. On startup kernel oopses
> > early and this 'oops' loops over and over again on the screen until you
> > shut down the box. So I can't (easily) capture the output. I tried different
> > boot_delay values but it seems that it doesn't work as intended. Seems that
> > it delays only the first printk from oops, then the rest loops over the screen
> > without delay - again it becomes unreadable. I used my usual config with a bunch
> > of debug options enabled so that maybe is not real rt system case. Also tried to
> > bisect it with quilt but that is hard. Lots of patches depends on another patches
> > so bisection brakes things. I'll look into this tommorow and reply if I get
> > anything substantial.
> >
> > I attached my config in case anybody wants to try to reproduce that.
> >
> 
> Turn off LOCKDEP and see if you still have the same problems. This might
> be fixed with Daniel's patch.

Ok. It works.

I found this in dmesg:

BUG: swapper:0 task might have lost a preemption check!
Pid: 0, comm: swapper Not tainted 2.6.24-rc7-rt2 #3
 [<c010386b>] show_trace_log_lvl+0x1d/0x3b
 [<c01042f3>] show_trace+0x12/0x14
 [<c0104a2f>] dump_stack+0x6a/0x70
 [<c0115419>] preempt_enable_no_resched+0x5c/0x5e
 [<c0100e35>] cpu_idle+0x6d/0x82
 [<c0323b6e>] rest_init+0x66/0x68
 [<c043aba6>] start_kernel+0x20c/0x276
 [<00000000>] 0x0
 =======================
---------------------------
| preempt count: 00000000 ]
| 0-level deep critical section nesting:
----------------------------------------

Box runs fine though.

Regards,

	Mariusz

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-15 16:27 ` 2.6.24-rc7-rt2 Luotao Fu
@ 2008-01-15 18:06   ` Steven Rostedt
  2008-01-15 20:04     ` 2.6.24-rc7-rt2 Luotao Fu
  2008-01-16 12:03     ` 2.6.24-rc7-rt2 [PATCH] latency tracer fix for ppc32 Luotao Fu
  0 siblings, 2 replies; 30+ messages in thread
From: Steven Rostedt @ 2008-01-15 18:06 UTC (permalink / raw)
  To: Luotao Fu; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner



On Tue, 15 Jan 2008, Luotao Fu wrote:
>
> Compiling with tracing function turned seemed still to be broken to me:

Could you email me your config (privately)

> kernel/built-in.o: In function `early_printk_name':
> latency_trace.c:(.text+0x3cd18): undefined reference to `early_printk'
> latency_trace.c:(.text+0x3cd40): undefined reference to `early_printk'
> kernel/built-in.o: In function `early_print_entry':
> latency_trace.c:(.text+0x3cd80): undefined reference to `early_printk'
> latency_trace.c:(.text+0x3cdd8): undefined reference to `early_printk'
> latency_trace.c:(.text+0x3cdfc): undefined reference to `early_printk'
>
> We made a early_printk patch based on the 8250_early for powerpc 32bit here.
> (still absolutely untested and incomplete, we will post it asap). I added
> early_printk() and exported _mcount() and could compile succesfully. However the
> kernel will not boot. I attached a bdi to it and found out that it stucks at
> _mcount in arch/powerpc/kernel/entry_32.S at about line 1080, where the variable
> mcount_enabled is loaded and checked. Obviously the variable is still not valid
> at the time of check. To check this I took out the lines like above
>
> --- arch/powerpc/kernel/entry_32.S.orig 2008-01-15 17:01:25.000000000 +0100
> +++ arch/powerpc/kernel/entry_32.S      2008-01-15 17:17:18.000000000 +0100
> @@ -1075,9 +1075,6 @@
>         stw     r6, 24(r1)
>         mflr    r3      /* will use as first arg to __trace() */
>         mfcr    r4
> -       lis     r5,mcount_enabled@ha
> -       lwz     r5,mcount_enabled@l(r5)
> -       cmpwi   r5,0
>         stw     r3, 44(r1)      /* lr */
>         stw     r4,  8(r1)      /* cr */
>         stw     r7, 28(r1)
>
> After recompiling the kernel started normally and it seems to work. I was even
> able to make a trace with cyclictest. However there were several crashes (which
> might be caused by other problems). I still have to take a closer look.
>
> I am just wondering why the check for mcount_enabled is there at all and I think
> that there due to be some better fixes than just throw it out ;-). On the other
> side, I just can't find in which way mcount_enabled is used in the tracer at
> all. Could you give me some hints on this one?
>

The way we turn on and off mcount function calls at run time is through
mcount_enable.  I'll look into why this is broken for you. I'm able to run
with this. My box is a ppc64, and my ppc32 (powerbook) wont come close to
booting RT (never did).  On boot up it locks up right away and the screen
looks like it starts to melt. No serial, so I don't have much to debug
that with.

Anyway, I'll take a deeper look into this.

Thanks,

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-15 18:06   ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-15 20:04     ` Luotao Fu
  2008-01-16 12:03     ` 2.6.24-rc7-rt2 [PATCH] latency tracer fix for ppc32 Luotao Fu
  1 sibling, 0 replies; 30+ messages in thread
From: Luotao Fu @ 2008-01-15 20:04 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: Luotao Fu, LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 2906 bytes --]

Hi Steven,

On Tue, Jan 15, 2008 at 01:06:25PM -0500, Steven Rostedt wrote:
> 
> 
> On Tue, 15 Jan 2008, Luotao Fu wrote:
> >
> > Compiling with tracing function turned seemed still to be broken to me:
> 
> Could you email me your config (privately)

will send it later in another private mail, actually nothing spectacular. The
early_printk() is simply missing for 32bit powerpc. The 64bit implementation
puts a dummy for early_printk in setup_64.c:
~ grep -A 4 EARLY_PRINTK ./arch/powerpc/kernel/setup_64.c | head -6
#ifdef CONFIG_EARLY_PRINTK
void notrace early_printk(const char *fmt, ...)
{
        BUG();
	}
	#endif /* CONFIG_EARLY_PRINTK */
;-)
that could be why it works for you.

> 
....
> > After recompiling the kernel started normally and it seems to work. I was even
> > able to make a trace with cyclictest. However there were several crashes (which
> > might be caused by other problems). I still have to take a closer look.
> >
> > I am just wondering why the check for mcount_enabled is there at all and I think
> > that there due to be some better fixes than just throw it out ;-). On the other
> > side, I just can't find in which way mcount_enabled is used in the tracer at
> > all. Could you give me some hints on this one?
> >
> 
> The way we turn on and off mcount function calls at run time is through
> mcount_enable.  I'll look into why this is broken for you. I'm able to run
> with this. My box is a ppc64, and my ppc32 (powerbook) wont come close to
> booting RT (never did).  On boot up it locks up right away and the screen
> looks like it starts to melt. No serial, so I don't have much to debug
> that with.
> 

ah, thx for the hint. I took a look in the entry_64.S file. The checking of
mcount_enabled is indeed literally the same as the 32bit architecture.
An important point for the failure on 32bit machines is that due to my bdi the
machine got stuck still before the mmu is running. Hence I get quite funny pc
address like
Current PC        : 0x000135dc
it still lies over on 0x0 as the physical adress of the decompressed kernel in
memory. I think that mcount_enabled is linked somewhere in the virtual addess
space, so that the cmpwi stucks forever for _mcount is called so early, that we
still don't work with virtual addresses. I don't understand enough powerpc
assembler to work out how the LOAD_REG_ADDR() (used in entry_64.S to load
mcount_enabled) of 64 bit powerpcs work around this problem. Anyway, If my guess
is right, we might need something to get or simply ignore mcount_enabled
checking in the _mcount calls during early initialisation.

> Anyway, I'll take a deeper look into this.
> 

Thanks


cheers
Luotao Fu
-- 
   Dipl.-Ing. Luotao Fu | Phone: +49-5121-206917-3
Pengutronix - Linux Solutions for Science and Industry
Entwicklungszentrum Nord     http://www.pengutronix.de


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-15  0:37 ` 2.6.24-rc7-rt2 S.Çağlar Onur
@ 2008-01-16  3:50   ` Valdis.Kletnieks
  2008-01-16  4:04     ` 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-16 13:17     ` 2.6.24-rc7-rt2 Alan Cox
  2008-01-16  4:01   ` 2.6.24-rc7-rt2 Steven Rostedt
  1 sibling, 2 replies; 30+ messages in thread
From: Valdis.Kletnieks @ 2008-01-16  3:50 UTC (permalink / raw)
  To: caglar; +Cc: Steven Rostedt, LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 694 bytes --]

On Tue, 15 Jan 2008 02:37:37 +0200, =?utf-8?q?S=2E=C3=87a=C4=9Flar?= Onur said:
> And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch, closed
> source nvidia-new module cannot be used with this release (mcount is exported
> GPL only), i know this is not supported but i used it with that [2] patch up
> until now without a single problem.

Playing devil's advocate here - the claim is that EXPORT_SYMBOL_GPL is to
indicate that code is getting too chummy with Linux internals.

However, in *this* case, isn't it "code that is too chummy with *GCC* internals",
and thus it isn't our place to say what can and can't be done with code that
is derivative of the GCC compiler? ;)

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-15  0:37 ` 2.6.24-rc7-rt2 S.Çağlar Onur
  2008-01-16  3:50   ` 2.6.24-rc7-rt2 Valdis.Kletnieks
@ 2008-01-16  4:01   ` Steven Rostedt
  2008-01-16  7:12     ` 2.6.24-rc7-rt2 S.Çağlar Onur
  1 sibling, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-16  4:01 UTC (permalink / raw)
  To: S.Çağlar Onur; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner


On Tue, 15 Jan 2008, [utf-8] S.Ã^GaÄ^_lar Onur wrote:

>
> 2.6.24-rc7-rt2 (-rt2 patchset on top of Linus's current git commit
> 031f2dcd7075e218e74dd7f942ad015cf82dffab) starts to complain like following
> (full dmesg can be found @ [1]) when try to login from console (the other
> acpi related errors also existed in 2.6.24-rc5-rt1) and FYI, plain 2.6.24-rc7
> (again commit 031f2dcd7075e218e74dd7f942ad015cf82dffab) has no issues.

Do you get the same issues if you add to -rc7 and not git.

>
> [...]
> sysfs: duplicate filename 'vcs1' can not be created
> WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> Pid: 1298, comm: mingetty Not tainted 2.6.24-rc7-rt2-99 #1
> [...]
>
> And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch, closed
> source nvidia-new module cannot be used with this release (mcount is exported
> GPL only), i know this is not supported but i used it with that [2] patch up
> until now without a single problem.

Ah, sorry about that. I'll try to fix that later on. You should still be
able to use NVidia by turning off function trace.

>
> Please don't misunderstand this, i really do not want to start a discussion
> for this, i just want to ask the possibility of converting this into
> EXPORT_SYMBOL cause i thought some of the possible -rt users may need this
> closed source module explicitly because of its 3D performance.
>
> If anything else needed for sysfs warnings please just say it...
>
> [1] http://cekirdek.pardus.org.tr/~caglar/dmesg.rt
> [2]
> http://svn.pardus.org.tr/pardus/devel/kernel/drivers/nvidia-new/files/rt.patch
>

Thanks for the report. I'll see what I can do for the next release. But
for now this will have to wait till after -rt3.

-- Steve

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16  3:50   ` 2.6.24-rc7-rt2 Valdis.Kletnieks
@ 2008-01-16  4:04     ` Steven Rostedt
  2008-01-16  6:23       ` 2.6.24-rc7-rt2 Valdis.Kletnieks
  2008-01-16 13:17     ` 2.6.24-rc7-rt2 Alan Cox
  1 sibling, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-16  4:04 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: caglar, LKML, RT, Ingo Molnar, Thomas Gleixner


On Tue, 15 Jan 2008 Valdis.Kletnieks@vt.edu wrote:

> On Tue, 15 Jan 2008 02:37:37 +0200, =?utf-8?q?S=2E=C3=87a=C4=9Flar?= Onur said:
> > And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch, closed
> > source nvidia-new module cannot be used with this release (mcount is exported
> > GPL only), i know this is not supported but i used it with that [2] patch up
> > until now without a single problem.
>
> Playing devil's advocate here - the claim is that EXPORT_SYMBOL_GPL is to
> indicate that code is getting too chummy with Linux internals.
>
> However, in *this* case, isn't it "code that is too chummy with *GCC* internals",
> and thus it isn't our place to say what can and can't be done with code that
> is derivative of the GCC compiler? ;)

Actually, it got put in there by accident. I usually default all my
exports as GPL.  But this breaks pretty much everything, so I'll leave it
as EXPORT_SYMBOL.

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16  4:04     ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-16  6:23       ` Valdis.Kletnieks
  2008-01-16 14:12         ` 2.6.24-rc7-rt2 Steven Rostedt
  0 siblings, 1 reply; 30+ messages in thread
From: Valdis.Kletnieks @ 2008-01-16  6:23 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: caglar, LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 1053 bytes --]

On Tue, 15 Jan 2008 23:04:39 EST, Steven Rostedt said:
> 
> On Tue, 15 Jan 2008 Valdis.Kletnieks@vt.edu wrote:
> 
> > On Tue, 15 Jan 2008 02:37:37 +0200, =?utf-8?q?S=2E=C3=87a=C4=9Flar?= Onur said:
> > > And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch, closed
> > > source nvidia-new module cannot be used with this release (mcount is exported
> > > GPL only), i know this is not supported but i used it with that [2] patch up
> > > until now without a single problem.
> >
> > Playing devil's advocate here - the claim is that EXPORT_SYMBOL_GPL is to
> > indicate that code is getting too chummy with Linux internals.
> >
> > However, in *this* case, isn't it "code that is too chummy with *GCC* internals",
> > and thus it isn't our place to say what can and can't be done with code that
> > is derivative of the GCC compiler? ;)
> 
> Actually, it got put in there by accident. I usually default all my
> exports as GPL.  But this breaks pretty much everything, so I'll leave it
> as EXPORT_SYMBOL.

OK, I can live with that. ;)

[-- Attachment #2: Type: application/pgp-signature, Size: 226 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16  4:01   ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-16  7:12     ` S.Çağlar Onur
  2008-01-16 10:11       ` 2.6.24-rc7-rt2 S.Çağlar Onur
  0 siblings, 1 reply; 30+ messages in thread
From: S.Çağlar Onur @ 2008-01-16  7:12 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 2178 bytes --]

Hi,

16 Oca 2008 Çar tarihinde, Steven Rostedt şunları yazmıştı: 
> On Tue, 15 Jan 2008, [utf-8] S.Ã^GaÄ^_lar Onur wrote:
> > 2.6.24-rc7-rt2 (-rt2 patchset on top of Linus's current git commit
> > 031f2dcd7075e218e74dd7f942ad015cf82dffab) starts to complain like
> > following (full dmesg can be found @ [1]) when try to login from console
> > (the other acpi related errors also existed in 2.6.24-rc5-rt1) and FYI,
> > plain 2.6.24-rc7 (again commit 031f2dcd7075e218e74dd7f942ad015cf82dffab)
> > has no issues.
>
> Do you get the same issues if you add to -rc7 and not git.

I'll try after trying -rt3.

> > [...]
> > sysfs: duplicate filename 'vcs1' can not be created
> > WARNING: at fs/sysfs/dir.c:424 sysfs_add_one()
> > Pid: 1298, comm: mingetty Not tainted 2.6.24-rc7-rt2-99 #1
> > [...]
> >
> > And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch,
> > closed source nvidia-new module cannot be used with this release (mcount
> > is exported GPL only), i know this is not supported but i used it with
> > that [2] patch up until now without a single problem.
>
> Ah, sorry about that. I'll try to fix that later on. You should still be
> able to use NVidia by turning off function trace.

Wonderfull news :) [and yes turning off function trace works]

> > Please don't misunderstand this, i really do not want to start a
> > discussion for this, i just want to ask the possibility of converting
> > this into EXPORT_SYMBOL cause i thought some of the possible -rt users
> > may need this closed source module explicitly because of its 3D
> > performance.
> >
> > If anything else needed for sysfs warnings please just say it...
> >
> > [1] http://cekirdek.pardus.org.tr/~caglar/dmesg.rt
> > [2]
> > http://svn.pardus.org.tr/pardus/devel/kernel/drivers/nvidia-new/files/rt.
> >patch
>
> Thanks for the report. I'll see what I can do for the next release. But
> for now this will have to wait till after -rt3.

Thanks...

Cheers
-- 
S.Çağlar Onur <caglar@pardus.org.tr>
http://cekirdek.pardus.org.tr/~caglar/

Linux is like living in a teepee. No Windows, no Gates and an Apache in house!

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16  7:12     ` 2.6.24-rc7-rt2 S.Çağlar Onur
@ 2008-01-16 10:11       ` S.Çağlar Onur
  2008-01-17  2:20         ` 2.6.24-rc7-rt2 Steven Rostedt
  0 siblings, 1 reply; 30+ messages in thread
From: S.Çağlar Onur @ 2008-01-16 10:11 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

[-- Attachment #1: Type: text/plain, Size: 1129 bytes --]

Hi Again;

16 Oca 2008 Çar tarihinde, S.Çağlar Onur şunları yazmıştı: 
> 16 Oca 2008 Çar tarihinde, Steven Rostedt şunları yazmıştı:
> > On Tue, 15 Jan 2008, [utf-8] S.Ã^GaÄ^_lar Onur wrote:
> > > 2.6.24-rc7-rt2 (-rt2 patchset on top of Linus's current git commit
> > > 031f2dcd7075e218e74dd7f942ad015cf82dffab) starts to complain like
> > > following (full dmesg can be found @ [1]) when try to login from
> > > console (the other acpi related errors also existed in 2.6.24-rc5-rt1)
> > > and FYI, plain 2.6.24-rc7 (again commit
> > > 031f2dcd7075e218e74dd7f942ad015cf82dffab) has no issues.
> >
> > Do you get the same issues if you add to -rc7 and not git.
>
> I'll try after trying -rt3.

-rt3 on top of 2.6.24-rc8 works fine without that sysfs problem (acpi warnings 
still there and full dmesg can be found from [1]), whatever causes this seems 
solved :)

[1] http://cekirdek.pardus.org.tr/~caglar/dmesg.rt3

Cheers
-- 
S.Çağlar Onur <caglar@pardus.org.tr>
http://cekirdek.pardus.org.tr/~caglar/

Linux is like living in a teepee. No Windows, no Gates and an Apache in house!

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2 [PATCH] latency tracer fix for ppc32
  2008-01-15 18:06   ` 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-15 20:04     ` 2.6.24-rc7-rt2 Luotao Fu
@ 2008-01-16 12:03     ` Luotao Fu
  2008-01-17  3:26       ` Steven Rostedt
  1 sibling, 1 reply; 30+ messages in thread
From: Luotao Fu @ 2008-01-16 12:03 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: Luotao Fu, LKML, RT, Ingo Molnar, Thomas Gleixner


[-- Attachment #1.1: Type: text/plain, Size: 767 bytes --]

Hi Steve,

I found out that the tracer got stuck on ppc32 platforms because some early
functions call _mcount before mcount_enabled is initialized at all. I made a
patch, which marks these functions as notrace to solve this problem. With this
patch I can successfully boot up our mpc5200b platform and make latency trace.
(tested with -b switch in cyclictest). Please comment.

I made my patch against the -rt2 tree since the dummy call early_printk() in
-rt3 conflicts with our implementation of a functional early_printk(). It
should also work with -rt3 though.

cheers
Luotao Fu
-- 
   Dipl.-Ing. Luotao Fu | Phone: +49-5121-206917-3
Pengutronix - Linux Solutions for Science and Industry
Entwicklungszentrum Nord     http://www.pengutronix.de


[-- Attachment #1.2: ppc32_notrace_init_functions.diff --]
[-- Type: text/x-diff, Size: 2726 bytes --]

Subject: don't trace early init functions for ppc32
By: Luotao Fu <l.fu@pengutronix.de>
  If the latency tracer is turned on in the kernel config, _mcount calls are
  added automatically to every function call during compiling since -pg
  compiling flag is set. _mcount() checks first the variable mcount_enabled.
  (see implementation of _mcount() in arch/powerpc/kernel/entry_32.S) This will
  stuck forever if _mcount is called before mcount_enabled is initialized. Hence
  we mark some init functions as notrace, so that _mcount calls are not added to
  these functions.

Signed-off-by: Luotao Fu <l.fu@pengutronix.de>

---
 arch/powerpc/kernel/cputable.c |    4 ++--
 arch/powerpc/kernel/io.c       |    2 +-
 arch/powerpc/kernel/setup_32.c |    2 +-
 3 files changed, 4 insertions(+), 4 deletions(-)

Index: arch/powerpc/kernel/cputable.c
===================================================================
--- arch/powerpc/kernel/cputable.c.orig
+++ arch/powerpc/kernel/cputable.c
@@ -1333,7 +1333,7 @@ static struct cpu_spec __initdata cpu_sp
 
 static struct cpu_spec the_cpu_spec;
 
-struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
+notrace struct cpu_spec * __init identify_cpu(unsigned long offset, unsigned int pvr)
 {
 	struct cpu_spec *s = cpu_specs;
 	struct cpu_spec *t = &the_cpu_spec;
@@ -1380,7 +1380,7 @@ struct cpu_spec * __init identify_cpu(un
 	return NULL;
 }
 
-void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
+notrace void do_feature_fixups(unsigned long value, void *fixup_start, void *fixup_end)
 {
 	struct fixup_entry {
 		unsigned long	mask;
Index: arch/powerpc/kernel/io.c
===================================================================
--- arch/powerpc/kernel/io.c.orig
+++ arch/powerpc/kernel/io.c
@@ -120,7 +120,7 @@ EXPORT_SYMBOL(_outsl_ns);
 
 #define IO_CHECK_ALIGN(v,a) ((((unsigned long)(v)) & ((a) - 1)) == 0)
 
-void _memset_io(volatile void __iomem *addr, int c, unsigned long n)
+notrace void _memset_io(volatile void __iomem *addr, int c, unsigned long n)
 {
 	void *p = (void __force *)addr;
 	u32 lc = c;
Index: arch/powerpc/kernel/setup_32.c
===================================================================
--- arch/powerpc/kernel/setup_32.c.orig
+++ arch/powerpc/kernel/setup_32.c
@@ -88,7 +88,7 @@ int ucache_bsize;
  * from the address that it was linked at, so we must use RELOC/PTRRELOC
  * to access static data (including strings).  -- paulus
  */
-unsigned long __init early_init(unsigned long dt_ptr)
+notrace unsigned long __init early_init(unsigned long dt_ptr)
 {
 	unsigned long offset = reloc_offset();
 	struct cpu_spec *spec;

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16  3:50   ` 2.6.24-rc7-rt2 Valdis.Kletnieks
  2008-01-16  4:04     ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-16 13:17     ` Alan Cox
  1 sibling, 0 replies; 30+ messages in thread
From: Alan Cox @ 2008-01-16 13:17 UTC (permalink / raw)
  To: Valdis.Kletnieks
  Cc: caglar, Steven Rostedt, LKML, RT, Ingo Molnar, Thomas Gleixner

> Playing devil's advocate here - the claim is that EXPORT_SYMBOL_GPL is to
> indicate that code is getting too chummy with Linux internals.
> 
> However, in *this* case, isn't it "code that is too chummy with *GCC* internals",
> and thus it isn't our place to say what can and can't be done with code that
> is derivative of the GCC compiler? ;)

Yes. It would be something to discuss with the FSF.

However I don't think it matters. If you are doing instruction profiling
you need *all* the code built with profiling to get good results. You
can't rebuild the Nvidia modules so you can't profile them. 

Alan

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16  6:23       ` 2.6.24-rc7-rt2 Valdis.Kletnieks
@ 2008-01-16 14:12         ` Steven Rostedt
  2008-01-16 16:22           ` 2.6.24-rc7-rt2 Steven Rostedt
  0 siblings, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-16 14:12 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: caglar, LKML, RT, Ingo Molnar, Thomas Gleixner, Alan Cox


> > > On Tue, 15 Jan 2008 02:37:37 +0200, =?utf-8?q?S=2E=C3=87a=C4=9Flar?= Onur said:
> > > > And because of mcount-add-basic-support-for-gcc-profiler-instrum.patch, closed
> > > > source nvidia-new module cannot be used with this release (mcount is exported
> > > > GPL only), i know this is not supported but i used it with that [2] patch up
> > > > until now without a single problem.
> > >
> > > Playing devil's advocate here - the claim is that EXPORT_SYMBOL_GPL is to
> > > indicate that code is getting too chummy with Linux internals.
> > >
> > > However, in *this* case, isn't it "code that is too chummy with *GCC* internals",
> > > and thus it isn't our place to say what can and can't be done with code that
> > > is derivative of the GCC compiler? ;)
> >
> > Actually, it got put in there by accident. I usually default all my
> > exports as GPL.  But this breaks pretty much everything, so I'll leave it
> > as EXPORT_SYMBOL.
>
> OK, I can live with that. ;)
>

We modified mcount now, and it is derived from an objdump of glibc. So
this is most definitely a "derived" work from glibc. But glibc is licensed
as LGPL, which IIRC allows for non GPL to link to it.

I personally could care less if we use EXPORT_SYMBOL or EXPORT_SYMBOL_GPL.
But I really want to do The Right Thing(tm). I'm not a lawyer and don't
claim that I know anything about the law, but I'm leaning towards the non
_GPL version because the code was from LGPL and not from strict GPL.

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16 14:12         ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-16 16:22           ` Steven Rostedt
  2008-01-21 11:31             ` 2.6.24-rc7-rt2 Esben Nielsen
  0 siblings, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-16 16:22 UTC (permalink / raw)
  To: Valdis.Kletnieks; +Cc: caglar, LKML, RT, Ingo Molnar, Thomas Gleixner, Alan Cox


On Wed, 16 Jan 2008, Steven Rostedt wrote:
>
> We modified mcount now, and it is derived from an objdump of glibc. So
> this is most definitely a "derived" work from glibc. But glibc is licensed
> as LGPL, which IIRC allows for non GPL to link to it.
>
> I personally could care less if we use EXPORT_SYMBOL or EXPORT_SYMBOL_GPL.
> But I really want to do The Right Thing(tm). I'm not a lawyer and don't
> claim that I know anything about the law, but I'm leaning towards the non
> _GPL version because the code was from LGPL and not from strict GPL.

Sorry folks, I'm going to stick with the _GPL version. It doesn't mean
that you can't still load your nVidia module into -rt. I just means you
can't turn on function trace and then load it. Well, you might if you
don't compile the nVidia wrapper against it with function trace on.

The reason simply is to cover my butt.  By limiting it to GPL, I'm fine.
Even if the original author didn't care. But by opening it up to external
prorietary modules, I may be considered infringing on the license.

So, unless I hear from a lawyer that is willing to back me up on a non
_GPL export publically, the mcount function will stay as an
EXPORT_SYMBOL_GPL.

Note: There is a definite reason for this change. The previous version
of mcount was written by Ingo Molnar, and he added the export. I've
changed mcount to be closer to the glibc code (which I derived it from),
so the change in EXPORT type is legitimate.

-- Steve

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-15 17:10     ` 2.6.24-rc7-rt2 Mariusz Kozlowski
@ 2008-01-17  2:07       ` Steven Rostedt
  2008-01-17 17:11         ` 2.6.24-rc7-rt2 Mariusz Kozlowski
  0 siblings, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-17  2:07 UTC (permalink / raw)
  To: Mariusz Kozlowski; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner


On Tue, 15 Jan 2008, Mariusz Kozlowski wrote:
> Ok. It works.
>
> I found this in dmesg:
>
> BUG: swapper:0 task might have lost a preemption check!
> Pid: 0, comm: swapper Not tainted 2.6.24-rc7-rt2 #3
>  [<c010386b>] show_trace_log_lvl+0x1d/0x3b
>  [<c01042f3>] show_trace+0x12/0x14
>  [<c0104a2f>] dump_stack+0x6a/0x70
>  [<c0115419>] preempt_enable_no_resched+0x5c/0x5e

This is really really strange. cpu_idle calls __preempt_enable_no_resched
and not preempt_enable_no_resched (notice the prefixed underscores).
So I don't know how you got that output. Did you get any strance rejects
in applying this patch?

-- Steve


>  [<c0100e35>] cpu_idle+0x6d/0x82
>  [<c0323b6e>] rest_init+0x66/0x68
>  [<c043aba6>] start_kernel+0x20c/0x276
>  [<00000000>] 0x0
>  =======================
> ---------------------------
> | preempt count: 00000000 ]
> | 0-level deep critical section nesting:
> ----------------------------------------
>
> Box runs fine though.
>
> Regards,
>
> 	Mariusz
> -
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16 10:11       ` 2.6.24-rc7-rt2 S.Çağlar Onur
@ 2008-01-17  2:20         ` Steven Rostedt
  0 siblings, 0 replies; 30+ messages in thread
From: Steven Rostedt @ 2008-01-17  2:20 UTC (permalink / raw)
  To: S.Çağlar Onur; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner


Thomas, can you look at this. He's getting APIC errors on bootup. I'm
wondering if this isn't another strange anomaly of this controller.

He also states that he doesn't get this with the non-rt kernel.

>
> -rt3 on top of 2.6.24-rc8 works fine without that sysfs problem (acpi warnings
> still there and full dmesg can be found from [1]), whatever causes this seems
> solved :)
>
> [1] http://cekirdek.pardus.org.tr/~caglar/dmesg.rt3

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2 [PATCH] latency tracer fix for ppc32
  2008-01-16 12:03     ` 2.6.24-rc7-rt2 [PATCH] latency tracer fix for ppc32 Luotao Fu
@ 2008-01-17  3:26       ` Steven Rostedt
  0 siblings, 0 replies; 30+ messages in thread
From: Steven Rostedt @ 2008-01-17  3:26 UTC (permalink / raw)
  To: Luotao Fu; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner



On Wed, 16 Jan 2008, Luotao Fu wrote:
>
> I found out that the tracer got stuck on ppc32 platforms because some early
> functions call _mcount before mcount_enabled is initialized at all. I made a
> patch, which marks these functions as notrace to solve this problem. With this
> patch I can successfully boot up our mpc5200b platform and make latency trace.
> (tested with -b switch in cyclictest). Please comment.
>
> I made my patch against the -rt2 tree since the dummy call early_printk() in
> -rt3 conflicts with our implementation of a functional early_printk(). It
> should also work with -rt3 though.
>

Thanks, applied.

But for future reference, if you attach your patch please name it with the
ending of .patch and not .diff. Also do it at a -p1 level and not -p0.

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-17  2:07       ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-17 17:11         ` Mariusz Kozlowski
  2008-01-17 17:25           ` 2.6.24-rc7-rt2 Steven Rostedt
  0 siblings, 1 reply; 30+ messages in thread
From: Mariusz Kozlowski @ 2008-01-17 17:11 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

Hello,

> > I found this in dmesg:
> >
> > BUG: swapper:0 task might have lost a preemption check!
> > Pid: 0, comm: swapper Not tainted 2.6.24-rc7-rt2 #3
> >  [<c010386b>] show_trace_log_lvl+0x1d/0x3b
> >  [<c01042f3>] show_trace+0x12/0x14
> >  [<c0104a2f>] dump_stack+0x6a/0x70
> >  [<c0115419>] preempt_enable_no_resched+0x5c/0x5e
> 
> This is really really strange. cpu_idle calls __preempt_enable_no_resched
> and not preempt_enable_no_resched (notice the prefixed underscores).
> So I don't know how you got that output. Did you get any strance rejects
> in applying this patch?

Nope. Your rt patch applied cleanly to vanilla 2.6.24-rc7.

Regards,

	Mariusz

> >  [<c0100e35>] cpu_idle+0x6d/0x82
> >  [<c0323b6e>] rest_init+0x66/0x68
> >  [<c043aba6>] start_kernel+0x20c/0x276
> >  [<00000000>] 0x0
> >  =======================
> > ---------------------------
> > | preempt count: 00000000 ]
> > | 0-level deep critical section nesting:
> > ----------------------------------------
> >
> > Box runs fine though.

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-17 17:11         ` 2.6.24-rc7-rt2 Mariusz Kozlowski
@ 2008-01-17 17:25           ` Steven Rostedt
  2008-01-17 17:57             ` 2.6.24-rc7-rt2 Mariusz Kozlowski
  0 siblings, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-17 17:25 UTC (permalink / raw)
  To: Mariusz Kozlowski; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner


On Thu, 17 Jan 2008, Mariusz Kozlowski wrote:

> Hello,
>
> > > I found this in dmesg:
> > >
> > > BUG: swapper:0 task might have lost a preemption check!
> > > Pid: 0, comm: swapper Not tainted 2.6.24-rc7-rt2 #3
> > >  [<c010386b>] show_trace_log_lvl+0x1d/0x3b
> > >  [<c01042f3>] show_trace+0x12/0x14
> > >  [<c0104a2f>] dump_stack+0x6a/0x70
> > >  [<c0115419>] preempt_enable_no_resched+0x5c/0x5e
> >
> > This is really really strange. cpu_idle calls __preempt_enable_no_resched
> > and not preempt_enable_no_resched (notice the prefixed underscores).
> > So I don't know how you got that output. Did you get any strance rejects
> > in applying this patch?
>
> Nope. Your rt patch applied cleanly to vanilla 2.6.24-rc7.
>

OK, do you still get this message? Also I'm assuming this is x86, right?

Could you also do the following.

Go into your kernel build directory.
Start up gdb (I'm hoping that you compiled with DEBUG_INFO)
  gdb vmlinux
(gdb) li *0xc0100e35

and show me what you get.

Thanks,

-- Steve

>
> > >  [<c0100e35>] cpu_idle+0x6d/0x82
> > >  [<c0323b6e>] rest_init+0x66/0x68
> > >  [<c043aba6>] start_kernel+0x20c/0x276
> > >  [<00000000>] 0x0
> > >  =======================
> > > ---------------------------
> > > | preempt count: 00000000 ]
> > > | 0-level deep critical section nesting:
> > > ----------------------------------------
> > >
> > > Box runs fine though.
>

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-17 17:25           ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-17 17:57             ` Mariusz Kozlowski
  0 siblings, 0 replies; 30+ messages in thread
From: Mariusz Kozlowski @ 2008-01-17 17:57 UTC (permalink / raw)
  To: Steven Rostedt; +Cc: LKML, RT, Ingo Molnar, Thomas Gleixner

Hello,

> > > > I found this in dmesg:
> > > >
> > > > BUG: swapper:0 task might have lost a preemption check!
> > > > Pid: 0, comm: swapper Not tainted 2.6.24-rc7-rt2 #3
> > > >  [<c010386b>] show_trace_log_lvl+0x1d/0x3b
> > > >  [<c01042f3>] show_trace+0x12/0x14
> > > >  [<c0104a2f>] dump_stack+0x6a/0x70
> > > >  [<c0115419>] preempt_enable_no_resched+0x5c/0x5e
> > >
> > > This is really really strange. cpu_idle calls __preempt_enable_no_resched
> > > and not preempt_enable_no_resched (notice the prefixed underscores).
> > > So I don't know how you got that output. Did you get any strance rejects
> > > in applying this patch?
> >
> > Nope. Your rt patch applied cleanly to vanilla 2.6.24-rc7.
> >
> 
> OK, do you still get this message? Also I'm assuming this is x86, right?
> 
> Could you also do the following.
> 
> Go into your kernel build directory.
> Start up gdb (I'm hoping that you compiled with DEBUG_INFO)
>   gdb vmlinux
> (gdb) li *0xc0100e35
> 
> and show me what you get.

Oh crap. You are totaly right. I messed with quilt on that tree to bisect that thing
with LOCKDEP. A few patches from rt series were left unapplied somehow :/ Sorry for
the noise then.

Regards,

	Mariusz

BTW this is the gdb output which ofcourse is bogus.

(gdb) l*0xc0100e35
0xc0100e35 is in cpu_idle (arch/x86/kernel/process_32.c:203).
198                             __get_cpu_var(irq_stat).idle_timestamp = jiffies;
199                             idle();
200                     }
201                     tick_nohz_restart_sched_tick();
202                     preempt_enable_no_resched();
203                     schedule();
204                     preempt_disable();
205             }
206     }
207   

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-16 16:22           ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-21 11:31             ` Esben Nielsen
  2008-01-21 12:49               ` 2.6.24-rc7-rt2 Steven Rostedt
  2008-01-28  2:32               ` 2.6.24-rc7-rt2 Stefan Monnier
  0 siblings, 2 replies; 30+ messages in thread
From: Esben Nielsen @ 2008-01-21 11:31 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Valdis.Kletnieks, caglar, LKML, RT, Ingo Molnar, Thomas Gleixner,
	Alan Cox



On Wed, 16 Jan 2008, Steven Rostedt wrote:

>
> On Wed, 16 Jan 2008, Steven Rostedt wrote:
>>
>> We modified mcount now, and it is derived from an objdump of glibc. So
>> this is most definitely a "derived" work from glibc. But glibc is licensed
>> as LGPL, which IIRC allows for non GPL to link to it.
>>
>> I personally could care less if we use EXPORT_SYMBOL or EXPORT_SYMBOL_GPL.
>> But I really want to do The Right Thing(tm). I'm not a lawyer and don't
>> claim that I know anything about the law, but I'm leaning towards the non
>> _GPL version because the code was from LGPL and not from strict GPL.
>
> Sorry folks, I'm going to stick with the _GPL version. It doesn't mean
> that you can't still load your nVidia module into -rt. I just means you
> can't turn on function trace and then load it. Well, you might if you
> don't compile the nVidia wrapper against it with function trace on.
>
> The reason simply is to cover my butt.  By limiting it to GPL, I'm fine.
> Even if the original author didn't care. But by opening it up to external
> prorietary modules, I may be considered infringing on the license.
>
> So, unless I hear from a lawyer that is willing to back me up on a non
> _GPL export publically, the mcount function will stay as an
> EXPORT_SYMBOL_GPL.
>
> Note: There is a definite reason for this change. The previous version
> of mcount was written by Ingo Molnar, and he added the export. I've
> changed mcount to be closer to the glibc code (which I derived it from),
> so the change in EXPORT type is legitimate.
>
> -- Steve


Please, tell what in the license forbids me to make a global replacement
EXPORT_SYMBOL_GPL -> EXPORT_SYMBOL and distribute the result?

For me, on the other hand, it is against the spirit of free software to 
actively make a block for people to do what ever they want with the code 
when they are only doing it to themselves. That includes loading non-GPL 
software into the kernel. The only thing they  are not allowed to do is to
distribute it and in that way "hurt" other people.

Esben


> -
> To unsubscribe from this list: send the line "unsubscribe linux-rt-users" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-21 11:31             ` 2.6.24-rc7-rt2 Esben Nielsen
@ 2008-01-21 12:49               ` Steven Rostedt
  2008-01-27 21:51                 ` 2.6.24-rc7-rt2 Esben Nielsen
  2008-01-28  2:32               ` 2.6.24-rc7-rt2 Stefan Monnier
  1 sibling, 1 reply; 30+ messages in thread
From: Steven Rostedt @ 2008-01-21 12:49 UTC (permalink / raw)
  To: Esben Nielsen
  Cc: Valdis.Kletnieks, caglar, LKML, RT, Ingo Molnar, Thomas Gleixner,
	Alan Cox


On Mon, 21 Jan 2008, Esben Nielsen wrote:
>
> Please, tell what in the license forbids me to make a global replacement
> EXPORT_SYMBOL_GPL -> EXPORT_SYMBOL and distribute the result?

If you want to distribute that code, the authors of that said code
may be able to challenge you in saying that you are enabling a means to
circumvent a way around the license, and hold you liable. Remember, all it
takes is one country with the laws that will grant this complaint.

>
> For me, on the other hand, it is against the spirit of free software to
> actively make a block for people to do what ever they want with the code
> when they are only doing it to themselves. That includes loading non-GPL
> software into the kernel. The only thing they  are not allowed to do is to
> distribute it and in that way "hurt" other people.

Honestly, I don't care which export it is. The thing is that I derived
that code from someone else. I did not look up the original author of the
code to find out which export they would like it to be. I may be able to
argue that since it was under a LGPL and not a GPL license, I may very
well be able to export it that way.

I'm taking the safe way out. By exporting it as EXPORT_SYMBOL_GPL, I am
safe either way. By exporting it as EXPORT_SYMBOL without first hearing
from the original author (and getting that in writing), or hearing it from
a lawyer, I may be putting myself at risk.

Feel free to creating a version of this code and
s/EXPORT_SYMBOL_GPL/EXPORT_SYMBOL/ and distribute it. I wont come after
you for that, but at least I know those that would, will go after you and
not me.

Call me a chicken, I don't care, but I'm just not going to put myself nor
my company I work for, at risk over this issue.

-- Steve


^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-21 12:49               ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-27 21:51                 ` Esben Nielsen
  0 siblings, 0 replies; 30+ messages in thread
From: Esben Nielsen @ 2008-01-27 21:51 UTC (permalink / raw)
  To: Steven Rostedt
  Cc: Valdis.Kletnieks, caglar, LKML, RT, Ingo Molnar, Thomas Gleixner,
	Alan Cox


On Mon, 21 Jan 2008, Steven Rostedt wrote:

>
> On Mon, 21 Jan 2008, Esben Nielsen wrote:
>>
>> Please, tell what in the license forbids me to make a global replacement
>> EXPORT_SYMBOL_GPL -> EXPORT_SYMBOL and distribute the result?
>
> If you want to distribute that code, the authors of that said code
> may be able to challenge you in saying that you are enabling a means to
> circumvent a way around the license, and hold you liable. Remember, all it
> takes is one country with the laws that will grant this complaint.
>
>>
>> For me, on the other hand, it is against the spirit of free software to
>> actively make a block for people to do what ever they want with the code
>> when they are only doing it to themselves. That includes loading non-GPL
>> software into the kernel. The only thing they  are not allowed to do is to
>> distribute it and in that way "hurt" other people.
>
> Honestly, I don't care which export it is. The thing is that I derived
> that code from someone else. I did not look up the original author of the
> code to find out which export they would like it to be. I may be able to
> argue that since it was under a LGPL and not a GPL license, I may very
> well be able to export it that way.
>
> I'm taking the safe way out. By exporting it as EXPORT_SYMBOL_GPL, I am
> safe either way. By exporting it as EXPORT_SYMBOL without first hearing
> from the original author (and getting that in writing), or hearing it from
> a lawyer, I may be putting myself at risk.
>
> Feel free to creating a version of this code and
> s/EXPORT_SYMBOL_GPL/EXPORT_SYMBOL/ and distribute it. I wont come after
> you for that, but at least I know those that would, will go after you and
> not me.
>
> Call me a chicken, I don't care, but I'm just not going to put myself nor
> my company I work for, at risk over this issue.
>

First off, sorry for sounding so harsh and sorry for taking this 
discussion onto you. It is quite off-topic in this context. It was just 
a rant about the misconception that adding/removing _GPL to 
EXPORT_SYMBOL can make non-GPL modules more or less legal. Is is a 
_political_ issue, not a legal one.

Esben

> -- Steve
>

^ permalink raw reply	[flat|nested] 30+ messages in thread

* Re: 2.6.24-rc7-rt2
  2008-01-21 11:31             ` 2.6.24-rc7-rt2 Esben Nielsen
  2008-01-21 12:49               ` 2.6.24-rc7-rt2 Steven Rostedt
@ 2008-01-28  2:32               ` Stefan Monnier
  1 sibling, 0 replies; 30+ messages in thread
From: Stefan Monnier @ 2008-01-28  2:32 UTC (permalink / raw)
  To: linux-kernel; +Cc: linux-rt-users

> For me, on the other hand, it is against the spirit of free software to
> actively make a block for people to do what ever they want with the code
> when they are only doing it to themselves.  That includes loading non-GPL
> software into the kernel.  The only thing they are not allowed to do is to
> distribute it and in that way "hurt" other people.

Since the GPL only applies to the people to whom you distribute your
code, if you do not distribute the code, licensing it under the GPL is
100% harmless to you.

So the requirement to only load GPL'd code does not prevent people from
loading code that they do not intend to distribute.  They just have to
label it as GPL and then not distribute it.


        Stefan


^ permalink raw reply	[flat|nested] 30+ messages in thread

end of thread, other threads:[~2008-01-28  2:33 UTC | newest]

Thread overview: 30+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-01-14 18:41 2.6.24-rc7-rt2 Steven Rostedt
2008-01-14 20:02 ` 2.6.24-rc7-rt2 Mark Knecht
2008-01-14 22:16 ` 2.6.24-rc7-rt2 Mariusz Kozlowski
2008-01-14 22:30   ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-15 17:10     ` 2.6.24-rc7-rt2 Mariusz Kozlowski
2008-01-17  2:07       ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-17 17:11         ` 2.6.24-rc7-rt2 Mariusz Kozlowski
2008-01-17 17:25           ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-17 17:57             ` 2.6.24-rc7-rt2 Mariusz Kozlowski
2008-01-15  0:37 ` 2.6.24-rc7-rt2 S.Çağlar Onur
2008-01-16  3:50   ` 2.6.24-rc7-rt2 Valdis.Kletnieks
2008-01-16  4:04     ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-16  6:23       ` 2.6.24-rc7-rt2 Valdis.Kletnieks
2008-01-16 14:12         ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-16 16:22           ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-21 11:31             ` 2.6.24-rc7-rt2 Esben Nielsen
2008-01-21 12:49               ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-27 21:51                 ` 2.6.24-rc7-rt2 Esben Nielsen
2008-01-28  2:32               ` 2.6.24-rc7-rt2 Stefan Monnier
2008-01-16 13:17     ` 2.6.24-rc7-rt2 Alan Cox
2008-01-16  4:01   ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-16  7:12     ` 2.6.24-rc7-rt2 S.Çağlar Onur
2008-01-16 10:11       ` 2.6.24-rc7-rt2 S.Çağlar Onur
2008-01-17  2:20         ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-15  3:44 ` 2.6.24-rc7-rt2: WARNING: at include/linux/rcupreempt.h:110 rcu_enter_nohz() Mike Galbraith
2008-01-15 16:27 ` 2.6.24-rc7-rt2 Luotao Fu
2008-01-15 18:06   ` 2.6.24-rc7-rt2 Steven Rostedt
2008-01-15 20:04     ` 2.6.24-rc7-rt2 Luotao Fu
2008-01-16 12:03     ` 2.6.24-rc7-rt2 [PATCH] latency tracer fix for ppc32 Luotao Fu
2008-01-17  3:26       ` Steven Rostedt

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).