LKML Archive on lore.kernel.org help / color / mirror / Atom feed
From: Yinghai Lu <Yinghai.Lu@Sun.COM> To: Andrew Morton <akpm@linux-foundation.org> Cc: Greg KH <greg@kroah.com>, Ingo Molnar <mingo@elte.hu>, Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Subject: [PATCH 3/4] x86: mmconf enable mcfg early Date: Mon, 11 Feb 2008 16:47:10 -0800 [thread overview] Message-ID: <200802111647.11154.yinghai.lu@sun.com> (raw) In-Reply-To: <200802111645.38984.yinghai.lu@sun.com> From: Yinghai Lu <Yinghai.Lu@Sun.COM> Patch x86: validate against ACPI motherboard resources changed the mmconf init sequence, and init MMCONF late in acpi_init. here change it back to old sequence 1. check hostbridge in early 2. check MCFG with e820 in early 3. if all fail, will check MCFg with acpi _CRS in acpi_init So we can make MCONF working again when acpi=off is set if hostbridge support that. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Greg KH <greg@kroah.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> --- arch/x86/pci/mmconfig-shared.c | 106 +++++++++++++++++-------------- 1 file changed, 61 insertions(+), 45 deletions(-) Index: linux-2.6/arch/x86/pci/mmconfig-shared.c =================================================================== --- linux-2.6.orig/arch/x86/pci/mmconfig-shared.c +++ linux-2.6/arch/x86/pci/mmconfig-shared.c @@ -241,7 +241,7 @@ static int __init is_acpi_reserved(unsig return mcfg_res.flags; } -static void __init pci_mmcfg_reject_broken(void) +static void __init pci_mmcfg_reject_broken(int type, int early) { typeof(pci_mmcfg_config[0]) *cfg; int i; @@ -266,34 +266,43 @@ static void __init pci_mmcfg_reject_brok } for (i = 0; i < pci_mmcfg_config_num; i++) { + int valid = 0; u32 size = (cfg->end_bus_number + 1) << 20; cfg = &pci_mmcfg_config[i]; - printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lu " + printk(KERN_NOTICE "PCI: MCFG configuration %d: base %lx " "segment %hu buses %u - %u\n", i, (unsigned long)cfg->address, cfg->pci_segment, (unsigned int)cfg->start_bus_number, (unsigned int)cfg->end_bus_number); - if (is_acpi_reserved(cfg->address, cfg->address + size - 1)) { + + if (!early && + is_acpi_reserved(cfg->address, cfg->address + size - 1)) { printk(KERN_NOTICE "PCI: MCFG area at %Lx reserved " "in ACPI motherboard resources\n", cfg->address); - } else { + valid = 1; + } + + if (valid) + continue; + + if (!early) printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %Lx is not" " reserved in ACPI motherboard resources\n", cfg->address); - /* Don't try to do this check unless configuration - type 1 is available. */ - if ((pci_probe & PCI_PROBE_CONF1) && - e820_all_mapped(cfg->address, - cfg->address + size - 1, - E820_RESERVED)) - printk(KERN_NOTICE - "PCI: MCFG area at %Lx reserved in " - "E820\n", - cfg->address); - else - goto reject; + /* Don't try to do this check unless configuration + type 1 is available. */ + if (type == 1 && e820_all_mapped(cfg->address, + cfg->address + size - 1, + E820_RESERVED)) { + printk(KERN_NOTICE + "PCI: MCFG area at %Lx reserved in E820\n", + cfg->address); + valid = 1; } + + if (!valid) + goto reject; } return; @@ -306,46 +315,36 @@ reject: pci_mmcfg_config_num = 0; } -void __init pci_mmcfg_early_init(int type) -{ - if ((pci_probe & PCI_PROBE_MMCONF) == 0) - return; - - /* If type 1 access is available, no need to enable MMCONFIG yet, we can - defer until later when the ACPI interpreter is available to better - validate things. */ - if (type == 1) - return; - - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); - - if ((pci_mmcfg_config_num == 0) || - (pci_mmcfg_config == NULL) || - (pci_mmcfg_config[0].address == 0)) - return; +static int __initdata known_bridge; - if (pci_mmcfg_arch_init()) - pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF; -} - -void __init pci_mmcfg_late_init(void) +void __init __pci_mmcfg_init(int type, int early) { - int known_bridge = 0; - /* MMCONFIG disabled */ if ((pci_probe & PCI_PROBE_MMCONF) == 0) return; /* MMCONFIG already enabled */ - if (!(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF)) + if (!early && !(pci_probe & PCI_PROBE_MASK & ~PCI_PROBE_MMCONF)) return; - if ((pci_probe & PCI_PROBE_CONF1) && pci_mmcfg_check_hostbridge()) - known_bridge = 1; - else - acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + /* for late to exit */ + if (known_bridge) + return; - pci_mmcfg_reject_broken(); + if (early && type == 1) { + if (pci_mmcfg_check_hostbridge()) + known_bridge = 1; +#if 0 + /* check e820 in late? */ + else + return; +#endif + } + + if (!known_bridge) { + acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg); + pci_mmcfg_reject_broken(type, early); + } if ((pci_mmcfg_config_num == 0) || (pci_mmcfg_config == NULL) || @@ -365,6 +364,21 @@ void __init pci_mmcfg_late_init(void) } } +void __init pci_mmcfg_early_init(int type) +{ + __pci_mmcfg_init(type, 1); +} + +void __init pci_mmcfg_late_init(void) +{ + int type = 0; + + if (pci_probe & PCI_PROBE_CONF1) + type = 1; + + __pci_mmcfg_init(type, 0); +} + static int __init pci_mmcfg_late_insert_resources(void) { /*
next prev parent reply other threads:[~2008-02-12 0:45 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2008-02-12 0:43 [PATCH 1/4] x86: validate against acpi motherboard resources Yinghai Lu 2008-02-12 0:45 ` [PATCH 2/4] x86: clear pci_mmcfg_virt when mmcfg get rejected Yinghai Lu 2008-02-12 0:47 ` Yinghai Lu [this message] 2008-02-12 0:48 ` [PATCH 4/4] x86_64: check msr to get mmconfig for amd family 10h opteron v3 Yinghai Lu 2008-02-12 1:09 ` Andrew Morton 2008-02-12 2:20 ` Yinghai Lu 2008-02-12 2:51 ` Andrew Morton 2008-02-12 3:45 ` Yinghai Lu
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=200802111647.11154.yinghai.lu@sun.com \ --to=yinghai.lu@sun.com \ --cc=akpm@linux-foundation.org \ --cc=greg@kroah.com \ --cc=linux-kernel@vger.kernel.org \ --cc=mingo@elte.hu \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).