LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] adt7473: New driver for Analog Devices ADT7473 sensor chip
@ 2007-12-19  3:41 Darrick J. Wong
       [not found] ` <20071219154759.7be5025c@hyperion.delvare>
  0 siblings, 1 reply; 8+ messages in thread
From: Darrick J. Wong @ 2007-12-19  3:41 UTC (permalink / raw)
  To: lm-sensors; +Cc: linux-kernel, Mark M. Hoffman

This driver reports voltage, temperature and fan sensor readings
on an ADT7473 chip.  The ADT7467 chip seems to share some registers
with this one, so it may be possible to add support for it, though
the therm_adt746x driver seems to cover it ok on a PPC Mac.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
---

 drivers/hwmon/Kconfig   |   10 
 drivers/hwmon/Makefile  |    1 
 drivers/hwmon/adt7473.c | 1164 +++++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 1175 insertions(+), 0 deletions(-)

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index af43d56..7ee4893 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -143,6 +143,16 @@ config SENSORS_ADT7470
 	  This driver can also be built as a module. If so, the module
 	  will be called adt7470.
 
+config SENSORS_ADT7473
+	tristate "Analog Devices ADT7473"
+	depends on I2C && EXPERIMENTAL
+	help
+	  If you say yes here you get support for the Analog Devices
+	  ADT7473 temperature monitoring chips.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called adt7473.
+
 config SENSORS_K8TEMP
 	tristate "AMD Athlon64/FX or Opteron temperature sensor"
 	depends on X86 && PCI && EXPERIMENTAL
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 77a3e09..802f6b3 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_SENSORS_ADM1029)	+= adm1029.o
 obj-$(CONFIG_SENSORS_ADM1031)	+= adm1031.o
 obj-$(CONFIG_SENSORS_ADM9240)	+= adm9240.o
 obj-$(CONFIG_SENSORS_ADT7470)	+= adt7470.o
+obj-$(CONFIG_SENSORS_ADT7473)	+= adt7473.o
 obj-$(CONFIG_SENSORS_APPLESMC)	+= applesmc.o
 obj-$(CONFIG_SENSORS_AMS)	+= ams/
 obj-$(CONFIG_SENSORS_ATXP1)	+= atxp1.o
diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c
new file mode 100644
index 0000000..ff041c7
--- /dev/null
+++ b/drivers/hwmon/adt7473.c
@@ -0,0 +1,1164 @@
+/*
+ * A hwmon driver for the Analog Devices ADT7473
+ * Copyright (C) 2007 IBM
+ *
+ * Author: Darrick J. Wong <djwong@us.ibm.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/log2.h>
+
+/* Addresses to scan */
+static unsigned short normal_i2c[] = { 0x2C, 0x2D, 0x2E, I2C_CLIENT_END };
+
+/* Insmod parameters */
+I2C_CLIENT_INSMOD_1(adt7473);
+
+/* ADT7473 registers */
+#define ADT7473_REG_BASE_ADDR			0x20
+
+#define ADT7473_REG_VOLT_BASE_ADDR		0x21
+#define ADT7473_REG_VOLT_MAX_ADDR		0x22
+#define ADT7473_REG_VOLT_MIN_BASE_ADDR		0x46
+#define ADT7473_REG_VOLT_MIN_MAX_ADDR		0x49
+
+#define ADT7473_REG_TEMP_BASE_ADDR		0x25
+#define ADT7473_REG_TEMP_MAX_ADDR		0x27
+#define ADT7473_REG_TEMP_LIMITS_BASE_ADDR	0x4E
+#define ADT7473_REG_TEMP_LIMITS_MAX_ADDR	0x53
+#define ADT7473_REG_TEMP_TMIN_BASE_ADDR		0x67
+#define ADT7473_REG_TEMP_TMIN_MAX_ADDR		0x69
+#define ADT7473_REG_TEMP_TMAX_BASE_ADDR		0x6A
+#define ADT7473_REG_TEMP_TMAX_MAX_ADDR		0x6C
+
+#define ADT7473_REG_FAN_BASE_ADDR		0x28
+#define ADT7473_REG_FAN_MAX_ADDR		0x2F
+#define ADT7473_REG_FAN_MIN_BASE_ADDR		0x54
+#define ADT7473_REG_FAN_MIN_MAX_ADDR		0x5B
+
+#define ADT7473_REG_PWM_BASE_ADDR		0x30
+#define ADT7473_REG_PWM_MAX_ADDR		0x32
+#define	ADT7473_REG_PWM_MIN_BASE_ADDR		0x64
+#define ADT7473_REG_PWM_MIN_MAX_ADDR		0x66
+#define ADT7473_REG_PWM_MAX_BASE_ADDR		0x38
+#define ADT7473_REG_PWM_MAX_MAX_ADDR		0x3A
+#define ADT7473_REG_PWM_BHVR_BASE_ADDR		0x5C
+#define ADT7473_REG_PWM_BHVR_MAX_ADDR		0x5E
+#define		ADT7473_PWM_BHVR_MASK		0xE0
+#define		ADT7473_PWM_BHVR_SHIFT		5
+
+#define ADT7473_REG_CFG1			0x40
+#define 	ADT7473_CFG1_START		0x01
+#define		ADT7473_CFG1_READY		0x04
+#define ADT7473_REG_CFG2			0x73
+#define ADT7473_REG_CFG3			0x78
+#define ADT7473_REG_CFG4			0x7D
+#define		ADT7473_CFG4_MAX_DUTY_AT_OVT	0x08
+#define ADT7473_REG_CFG5			0x7C
+#define		ADT7473_CFG5_TEMP_TWOS		0x01
+#define		ADT7473_CFG5_TEMP_OFFSET	0x02
+
+#define ADT7473_REG_DEVICE			0x3D
+#define 	ADT7473_VENDOR			0x41
+#define ADT7473_REG_VENDOR			0x3E
+#define 	ADT7473_DEVICE			0x73
+#define ADT7473_REG_REVISION			0x3F
+#define 	ADT7473_REV_68			0x68
+#define 	ADT7473_REV_69			0x69
+
+#define ADT7473_REG_ALARM1			0x41
+#define		ADT7473_VCCP_ALARM		0x02
+#define		ADT7473_VCC_ALARM		0x04
+#define		ADT7473_R1T_ALARM		0x10
+#define		ADT7473_LT_ALARM		0x20
+#define		ADT7473_R2T_ALARM		0x40
+#define		ADT7473_OOL			0x80
+#define ADT7473_REG_ALARM2			0x42
+#define		ADT7473_OVT_ALARM		0x02
+#define		ADT7473_FAN1_ALARM		0x04
+#define		ADT7473_FAN2_ALARM		0x08
+#define		ADT7473_FAN3_ALARM		0x10
+#define		ADT7473_FAN4_ALARM		0x20
+#define		ADT7473_R1T_SHORT		0x40
+#define		ADT7473_R2T_SHORT		0x80
+#define ADT7473_REG_MAX_ADDR			0x80
+
+#define ALARM2(x)	((x) << 8)
+
+#define ADT7473_VOLT_COUNT	2
+#define ADT7473_REG_VOLT(x)	(ADT7473_REG_VOLT_BASE_ADDR + (x))
+#define ADT7473_REG_VOLT_MIN(x)	(ADT7473_REG_VOLT_MIN_BASE_ADDR + ((x) * 2))
+#define ADT7473_REG_VOLT_MAX(x)	(ADT7473_REG_VOLT_MIN_BASE_ADDR + \
+				((x) * 2) + 1)
+
+#define ADT7473_TEMP_COUNT	3
+#define ADT7473_REG_TEMP(x)	(ADT7473_REG_TEMP_BASE_ADDR + (x))
+#define ADT7473_REG_TEMP_MIN(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + ((x) * 2))
+#define ADT7473_REG_TEMP_MAX(x) (ADT7473_REG_TEMP_LIMITS_BASE_ADDR + \
+				((x) * 2) + 1)
+#define ADT7473_REG_TEMP_TMIN(x)	(ADT7473_REG_TEMP_TMIN_BASE_ADDR + (x))
+#define ADT7473_REG_TEMP_TMAX(x)	(ADT7473_REG_TEMP_TMAX_BASE_ADDR + (x))
+
+#define ADT7473_FAN_COUNT	4
+#define ADT7473_REG_FAN(x)	(ADT7473_REG_FAN_BASE_ADDR + ((x) * 2))
+#define ADT7473_REG_FAN_MIN(x)	(ADT7473_REG_FAN_MIN_BASE_ADDR + ((x) * 2))
+
+#define ADT7473_PWM_COUNT	3
+#define ADT7473_REG_PWM(x)	(ADT7473_REG_PWM_BASE_ADDR + (x))
+#define ADT7473_REG_PWM_MAX(x)	(ADT7473_REG_PWM_MAX_BASE_ADDR + (x))
+#define ADT7473_REG_PWM_MIN(x)	(ADT7473_REG_PWM_MIN_BASE_ADDR + (x))
+#define ADT7473_REG_PWM_BHVR(x)	(ADT7473_REG_PWM_BHVR_BASE_ADDR + (x))
+
+/* How often do we reread sensors values? (In jiffies) */
+#define SENSOR_REFRESH_INTERVAL	(2 * HZ)
+
+/* How often do we reread sensor limit values? (In jiffies) */
+#define LIMIT_REFRESH_INTERVAL	(60 * HZ)
+
+/* datasheet says to divide this number by the fan reading to get fan rpm */
+#define FAN_PERIOD_TO_RPM(x)	((90000 * 60) / (x))
+#define FAN_RPM_TO_PERIOD	FAN_PERIOD_TO_RPM
+#define FAN_PERIOD_INVALID	65535
+#define FAN_DATA_VALID(x)	((x) && (x) != FAN_PERIOD_INVALID)
+
+struct adt7473_data {
+	struct i2c_client	client;
+	struct device		*hwmon_dev;
+	struct attribute_group	attrs;
+	struct mutex		lock;
+	char			sensors_valid;
+	char			limits_valid;
+	unsigned long		sensors_last_updated;	/* In jiffies */
+	unsigned long		limits_last_updated;	/* In jiffies */
+
+	u8			volt[ADT7473_VOLT_COUNT];
+	s8			volt_min[ADT7473_VOLT_COUNT];
+	s8			volt_max[ADT7473_VOLT_COUNT];
+
+	s8			temp[ADT7473_TEMP_COUNT];
+	s8			temp_min[ADT7473_TEMP_COUNT];
+	s8			temp_max[ADT7473_TEMP_COUNT];
+	s8			temp_tmin[ADT7473_TEMP_COUNT];
+	/* This is called the !THERM limit in the datasheet */
+	s8			temp_tmax[ADT7473_TEMP_COUNT];
+
+	u16			fan[ADT7473_FAN_COUNT];
+	u16			fan_min[ADT7473_FAN_COUNT];
+
+	u8			pwm[ADT7473_PWM_COUNT];
+	u8			pwm_max[ADT7473_PWM_COUNT];
+	u8			pwm_min[ADT7473_PWM_COUNT];
+	u8			pwm_behavior[ADT7473_PWM_COUNT];
+
+	u8			temp_twos_complement;
+	u8			temp_offset;
+
+	u8			alarm1, alarm2;
+	u8			max_duty_at_overheat;
+};
+
+static int adt7473_attach_adapter(struct i2c_adapter *adapter);
+static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind);
+static int adt7473_detach_client(struct i2c_client *client);
+
+static struct i2c_driver adt7473_driver = {
+	.driver = {
+		.name	= "adt7473",
+	},
+	.attach_adapter	= adt7473_attach_adapter,
+	.detach_client	= adt7473_detach_client,
+};
+
+/*
+ * 16-bit registers on the ADT7473 are low-byte first.  The data sheet says
+ * that the low byte must be read before the high byte.
+ */
+static inline int adt7473_read_word_data(struct i2c_client *client, u8 reg)
+{
+	u16 foo;
+	foo = i2c_smbus_read_byte_data(client, reg);
+	foo |= ((u16)i2c_smbus_read_byte_data(client, reg + 1) << 8);
+	return foo;
+}
+
+static inline int adt7473_write_word_data(struct i2c_client *client, u8 reg,
+					  u16 value)
+{
+	return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
+	       && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+}
+
+static void adt7473_init_client(struct i2c_client *client)
+{
+	int reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG1);
+
+	if (!(reg & ADT7473_CFG1_READY)) {
+		dev_err(&client->dev, "Chip not ready.\n");
+	} else {
+		/* start monitoring */
+		i2c_smbus_write_byte_data(client, ADT7473_REG_CFG1,
+					  reg | ADT7473_CFG1_START);
+	}
+}
+
+static struct adt7473_data *adt7473_update_device(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	unsigned long local_jiffies = jiffies;
+	u8 cfg;
+	int i;
+
+	mutex_lock(&data->lock);
+	if (time_before(local_jiffies, data->sensors_last_updated +
+		SENSOR_REFRESH_INTERVAL)
+		&& data->sensors_valid)
+		goto no_sensor_update;
+
+	for (i = 0; i < ADT7473_VOLT_COUNT; i++)
+		data->volt[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_VOLT(i));
+
+	/* Determine temperature encoding */
+	cfg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG5);
+	data->temp_twos_complement = (cfg & ADT7473_CFG5_TEMP_TWOS);
+
+	/*
+	 * What does this do? it implies a variable temperature sensor
+	 * offset, but the datasheet doesn't say anything about this bit
+	 * and other parts of the datasheet imply that "offset64" mode
+	 * means that you shift temp values by -64 if the above bit was set.
+	 */
+	data->temp_offset = (cfg & ADT7473_CFG5_TEMP_OFFSET);
+
+	for (i = 0; i < ADT7473_TEMP_COUNT; i++)
+		data->temp[i] = i2c_smbus_read_byte_data(client,
+							 ADT7473_REG_TEMP(i));
+
+	for (i = 0; i < ADT7473_FAN_COUNT; i++)
+		data->fan[i] = adt7473_read_word_data(client,
+						ADT7473_REG_FAN(i));
+
+	for (i = 0; i < ADT7473_PWM_COUNT; i++)
+		data->pwm[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM(i));
+
+	data->alarm1 = i2c_smbus_read_byte_data(client, ADT7473_REG_ALARM1);
+	if (data->alarm1 & ADT7473_OOL)
+		data->alarm2 = i2c_smbus_read_byte_data(client,
+							 ADT7473_REG_ALARM2);
+	else
+		data->alarm2 = 0;
+
+	data->sensors_last_updated = local_jiffies;
+	data->sensors_valid = 1;
+
+no_sensor_update:
+	if (time_before(local_jiffies, data->limits_last_updated +
+		LIMIT_REFRESH_INTERVAL)
+		&& data->limits_valid)
+		goto out;
+
+	for (i = 0; i < ADT7473_VOLT_COUNT; i++) {
+		data->volt_min[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_VOLT_MIN(i));
+		data->volt_max[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_VOLT_MAX(i));
+	}
+
+	for (i = 0; i < ADT7473_TEMP_COUNT; i++) {
+		data->temp_min[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_MIN(i));
+		data->temp_max[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_MAX(i));
+		data->temp_tmin[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_TMIN(i));
+		data->temp_tmax[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_TEMP_TMAX(i));
+	}
+
+	for (i = 0; i < ADT7473_FAN_COUNT; i++)
+		data->fan_min[i] = adt7473_read_word_data(client,
+						ADT7473_REG_FAN_MIN(i));
+
+	for (i = 0; i < ADT7473_PWM_COUNT; i++) {
+		data->pwm_max[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM_MAX(i));
+		data->pwm_min[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM_MIN(i));
+		data->pwm_behavior[i] = i2c_smbus_read_byte_data(client,
+						ADT7473_REG_PWM_BHVR(i));
+	}
+
+	data->limits_last_updated = local_jiffies;
+	data->limits_valid = 1;
+
+out:
+	mutex_unlock(&data->lock);
+	return data;
+}
+
+/*
+ * On this chip, voltages are given as a count of steps between a minimum
+ * and maximum voltage, not a direct voltage.
+ */
+static int volt_convert_table[][2] = {
+	{2997, 3},
+	{4395, 4},
+};
+
+static int decode_volt(int volt_index, u8 raw)
+{
+	int cmax = volt_convert_table[volt_index][0];
+	int cmin = volt_convert_table[volt_index][1];
+	return ((raw * (cmax - cmin)) / 255) + cmin;
+}
+
+static u8 encode_volt(int volt_index, int cooked)
+{
+	int cmax = volt_convert_table[volt_index][0];
+	int cmin = volt_convert_table[volt_index][1];
+	u8 x;
+
+	if (cooked > cmax)
+		cooked = cmax;
+	else if (cooked < cmin)
+		cooked = cmin;
+
+	x = ((cooked - cmin) * 255) / (cmax - cmin);
+
+	return x;
+}
+
+static ssize_t show_volt_min(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       decode_volt(attr->index, data->volt_min[attr->index]));
+}
+
+static ssize_t set_volt_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+
+	mutex_lock(&data->lock);
+	data->volt_min[attr->index] = volt;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MIN(attr->index),
+				  volt);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_volt_max(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       decode_volt(attr->index, data->volt_max[attr->index]));
+}
+
+static ssize_t set_volt_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int volt = encode_volt(attr->index, simple_strtol(buf, NULL, 10));
+
+	mutex_lock(&data->lock);
+	data->volt_max[attr->index] = volt;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_VOLT_MAX(attr->index),
+				  volt);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_volt(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	return sprintf(buf, "%d\n",
+		       decode_volt(attr->index, data->volt[attr->index]));
+}
+
+/*
+ * This chip can report temperature data either as a two's complement
+ * number in the range -128 to 127, or as an unsigned number that must
+ * be offset by 64.
+ */
+static int decode_temp(struct adt7473_data *data, u8 raw)
+{
+	if (data->temp_twos_complement)
+		return (s8)raw;
+	return raw - 64;
+}
+
+static u8 encode_temp(struct adt7473_data *data, int cooked)
+{
+	if (data->temp_twos_complement)
+		return (cooked & 0xFF);
+	return cooked + 64;
+}
+
+static ssize_t show_temp_min(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_min[attr->index]));
+}
+
+static ssize_t set_temp_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_min[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MIN(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp_max(struct device *dev,
+			     struct device_attribute *devattr,
+			     char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_max[attr->index]));
+}
+
+static ssize_t set_temp_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    const char *buf,
+			    size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_max[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_MAX(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp[attr->index]));
+}
+
+static ssize_t show_fan_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	if (FAN_DATA_VALID(data->fan_min[attr->index]))
+		return sprintf(buf, "%d\n",
+			       FAN_PERIOD_TO_RPM(data->fan_min[attr->index]));
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t set_fan_min(struct device *dev,
+			   struct device_attribute *devattr,
+			   const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	if (!temp)
+		return -EINVAL;
+	temp = FAN_RPM_TO_PERIOD(temp);
+
+	mutex_lock(&data->lock);
+	data->fan_min[attr->index] = temp;
+	adt7473_write_word_data(client, ADT7473_REG_FAN_MIN(attr->index), temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	if (FAN_DATA_VALID(data->fan[attr->index]))
+		return sprintf(buf, "%d\n",
+			       FAN_PERIOD_TO_RPM(data->fan[attr->index]));
+	else
+		return sprintf(buf, "0\n");
+}
+
+static ssize_t show_max_duty_at_crit(struct device *dev,
+				     struct device_attribute *devattr,
+				     char *buf)
+{
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->max_duty_at_overheat);
+}
+
+static ssize_t set_max_duty_at_crit(struct device *dev,
+				    struct device_attribute *devattr,
+				    const char *buf,
+				    size_t count)
+{
+	u8 reg;
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+	temp = temp && 0xFF;
+
+	mutex_lock(&data->lock);
+	data->max_duty_at_overheat = temp;
+	reg = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4);
+	if (temp)
+		reg |= ADT7473_CFG4_MAX_DUTY_AT_OVT;
+	else
+		reg &= ~ADT7473_CFG4_MAX_DUTY_AT_OVT;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_CFG4, reg);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
+			char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm[attr->index]);
+}
+
+static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
+			const char *buf, size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->lock);
+	data->pwm[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM(attr->index), temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_max(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_max[attr->index]);
+}
+
+static ssize_t set_pwm_max(struct device *dev,
+			   struct device_attribute *devattr,
+			   const char *buf,
+			   size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->lock);
+	data->pwm_max[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MAX(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_min(struct device *dev,
+			    struct device_attribute *devattr,
+			    char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n", data->pwm_min[attr->index]);
+}
+
+static ssize_t set_pwm_min(struct device *dev,
+			   struct device_attribute *devattr,
+			   const char *buf,
+			   size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	mutex_lock(&data->lock);
+	data->pwm_min[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_MIN(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp_tmax(struct device *dev,
+			      struct device_attribute *devattr,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_tmax[attr->index]));
+}
+
+static ssize_t set_temp_tmax(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_tmax[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMAX(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_temp_tmin(struct device *dev,
+			      struct device_attribute *devattr,
+			      char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	return sprintf(buf, "%d\n",
+		       1000 * decode_temp(data, data->temp_tmin[attr->index]));
+}
+
+static ssize_t set_temp_tmin(struct device *dev,
+			     struct device_attribute *devattr,
+			     const char *buf,
+			     size_t count)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10) / 1000;
+	temp = encode_temp(data, temp);
+
+	mutex_lock(&data->lock);
+	data->temp_tmin[attr->index] = temp;
+	i2c_smbus_write_byte_data(client, ADT7473_REG_TEMP_TMIN(attr->index),
+				  temp);
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_enable(struct device *dev,
+			       struct device_attribute *devattr,
+			       char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	switch (data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT) {
+	case 3:
+		return sprintf(buf, "0\n");
+	case 7:
+		return sprintf(buf, "1\n");
+	default:
+		return sprintf(buf, "2\n");
+	}
+}
+
+static ssize_t set_pwm_enable(struct device *dev,
+			      struct device_attribute *devattr,
+			      const char *buf,
+			      size_t count)
+{
+	u8 reg;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	switch (temp) {
+	case 0:
+		temp = 3;
+		break;
+	case 1:
+		temp = 7;
+		break;
+	case 2:
+		/* Enter automatic mode with fans off */
+		temp = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	reg = i2c_smbus_read_byte_data(client,
+				       ADT7473_REG_PWM_BHVR(attr->index));
+	reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
+	      (reg & ~ADT7473_PWM_BHVR_MASK);
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
+				  reg);
+	data->pwm_behavior[attr->index] = reg;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_pwm_auto_temp(struct device *dev,
+				  struct device_attribute *devattr,
+				  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+	int bhvr = data->pwm_behavior[attr->index] >> ADT7473_PWM_BHVR_SHIFT;
+
+	switch (bhvr) {
+	case 3:
+	case 4:
+	case 7:
+		return sprintf(buf, "0\n");
+	case 0:
+	case 1:
+	case 5:
+	case 6:
+		return sprintf(buf, "%d\n", bhvr + 1);
+	case 2:
+		return sprintf(buf, "4\n");
+	}
+	BUG();
+}
+
+static ssize_t set_pwm_auto_temp(struct device *dev,
+				 struct device_attribute *devattr,
+				 const char *buf,
+				 size_t count)
+{
+	u8 reg;
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct i2c_client *client = to_i2c_client(dev);
+	struct adt7473_data *data = i2c_get_clientdata(client);
+	int temp = simple_strtol(buf, NULL, 10);
+
+	switch (temp) {
+	case 1:
+	case 2:
+	case 6:
+	case 7:
+		temp--;
+		break;
+	case 0:
+		temp = 4;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	mutex_lock(&data->lock);
+	reg = i2c_smbus_read_byte_data(client,
+				       ADT7473_REG_PWM_BHVR(attr->index));
+	reg = (temp << ADT7473_PWM_BHVR_SHIFT) |
+	      (reg & ~ADT7473_PWM_BHVR_MASK);
+	i2c_smbus_write_byte_data(client, ADT7473_REG_PWM_BHVR(attr->index),
+				  reg);
+	data->pwm_behavior[attr->index] = reg;
+	mutex_unlock(&data->lock);
+
+	return count;
+}
+
+static ssize_t show_alarm(struct device *dev,
+			  struct device_attribute *devattr,
+			  char *buf)
+{
+	struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
+	struct adt7473_data *data = adt7473_update_device(dev);
+
+	if (data->alarm1 & (attr->index & 0xFF) ||
+	    data->alarm2 & (attr->index >> 8))
+		return sprintf(buf, "1\n");
+	else
+		return sprintf(buf, "0\n");
+}
+
+
+static SENSOR_DEVICE_ATTR(in1_max, S_IWUSR | S_IRUGO, show_volt_max,
+			  set_volt_max, 0);
+static SENSOR_DEVICE_ATTR(in2_max, S_IWUSR | S_IRUGO, show_volt_max,
+			  set_volt_max, 1);
+
+static SENSOR_DEVICE_ATTR(in1_min, S_IWUSR | S_IRUGO, show_volt_min,
+			  set_volt_min, 0);
+static SENSOR_DEVICE_ATTR(in2_min, S_IWUSR | S_IRUGO, show_volt_min,
+			  set_volt_min, 1);
+
+static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_volt, NULL, 0);
+static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_volt, NULL, 1);
+
+static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_VCCP_ALARM);
+static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_VCC_ALARM);
+
+static SENSOR_DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max,
+			  set_temp_max, 0);
+static SENSOR_DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_temp_max,
+			  set_temp_max, 1);
+static SENSOR_DEVICE_ATTR(temp3_max, S_IWUSR | S_IRUGO, show_temp_max,
+			  set_temp_max, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_min,
+			  set_temp_min, 0);
+static SENSOR_DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_temp_min,
+			  set_temp_min, 1);
+static SENSOR_DEVICE_ATTR(temp3_min, S_IWUSR | S_IRUGO, show_temp_min,
+			  set_temp_min, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
+static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
+static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_R1T_ALARM | ALARM2(ADT7473_R1T_SHORT));
+static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_LT_ALARM);
+static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
+			  ADT7473_R2T_ALARM | ALARM2(ADT7473_R2T_SHORT));
+
+static SENSOR_DEVICE_ATTR(fan1_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 0);
+static SENSOR_DEVICE_ATTR(fan2_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 1);
+static SENSOR_DEVICE_ATTR(fan3_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 2);
+static SENSOR_DEVICE_ATTR(fan4_min, S_IWUSR | S_IRUGO, show_fan_min,
+			  set_fan_min, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
+static SENSOR_DEVICE_ATTR(fan4_input, S_IRUGO, show_fan, NULL, 3);
+
+static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN1_ALARM));
+static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN2_ALARM));
+static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN3_ALARM));
+static SENSOR_DEVICE_ATTR(fan4_alarm, S_IRUGO, show_alarm, NULL,
+			  ALARM2(ADT7473_FAN4_ALARM));
+
+static SENSOR_DEVICE_ATTR(pwm_use_point2_pwm_at_crit, S_IWUSR | S_IRUGO,
+			  show_max_duty_at_crit, set_max_duty_at_crit, 0);
+
+static SENSOR_DEVICE_ATTR(pwm1, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 0);
+static SENSOR_DEVICE_ATTR(pwm2, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 1);
+static SENSOR_DEVICE_ATTR(pwm3, S_IWUSR | S_IRUGO, show_pwm, set_pwm, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point1_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_min, set_pwm_min, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point1_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_min, set_pwm_min, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point1_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_min, set_pwm_min, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_point2_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_max, set_pwm_max, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_point2_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_max, set_pwm_max, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_point2_pwm, S_IWUSR | S_IRUGO,
+			  show_pwm_max, set_pwm_max, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point1_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmin, set_temp_tmin, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point1_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmin, set_temp_tmin, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point1_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmin, set_temp_tmin, 2);
+
+static SENSOR_DEVICE_ATTR(temp1_auto_point2_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmax, set_temp_tmax, 0);
+static SENSOR_DEVICE_ATTR(temp2_auto_point2_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmax, set_temp_tmax, 1);
+static SENSOR_DEVICE_ATTR(temp3_auto_point2_temp, S_IWUSR | S_IRUGO,
+			  show_temp_tmax, set_temp_tmax, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+			  set_pwm_enable, 0);
+static SENSOR_DEVICE_ATTR(pwm2_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+			  set_pwm_enable, 1);
+static SENSOR_DEVICE_ATTR(pwm3_enable, S_IWUSR | S_IRUGO, show_pwm_enable,
+			  set_pwm_enable, 2);
+
+static SENSOR_DEVICE_ATTR(pwm1_auto_channels_temp, S_IWUSR | S_IRUGO,
+			  show_pwm_auto_temp, set_pwm_auto_temp, 0);
+static SENSOR_DEVICE_ATTR(pwm2_auto_channels_temp, S_IWUSR | S_IRUGO,
+			  show_pwm_auto_temp, set_pwm_auto_temp, 1);
+static SENSOR_DEVICE_ATTR(pwm3_auto_channels_temp, S_IWUSR | S_IRUGO,
+			  show_pwm_auto_temp, set_pwm_auto_temp, 2);
+
+static struct attribute *adt7473_attr[] =
+{
+	&sensor_dev_attr_in1_max.dev_attr.attr,
+	&sensor_dev_attr_in2_max.dev_attr.attr,
+	&sensor_dev_attr_in1_min.dev_attr.attr,
+	&sensor_dev_attr_in2_min.dev_attr.attr,
+	&sensor_dev_attr_in1_input.dev_attr.attr,
+	&sensor_dev_attr_in2_input.dev_attr.attr,
+	&sensor_dev_attr_in1_alarm.dev_attr.attr,
+	&sensor_dev_attr_in2_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_temp1_max.dev_attr.attr,
+	&sensor_dev_attr_temp2_max.dev_attr.attr,
+	&sensor_dev_attr_temp3_max.dev_attr.attr,
+	&sensor_dev_attr_temp1_min.dev_attr.attr,
+	&sensor_dev_attr_temp2_min.dev_attr.attr,
+	&sensor_dev_attr_temp3_min.dev_attr.attr,
+	&sensor_dev_attr_temp1_input.dev_attr.attr,
+	&sensor_dev_attr_temp2_input.dev_attr.attr,
+	&sensor_dev_attr_temp3_input.dev_attr.attr,
+	&sensor_dev_attr_temp1_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp2_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp3_alarm.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point1_temp.dev_attr.attr,
+	&sensor_dev_attr_temp1_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp2_auto_point2_temp.dev_attr.attr,
+	&sensor_dev_attr_temp3_auto_point2_temp.dev_attr.attr,
+
+	&sensor_dev_attr_fan1_min.dev_attr.attr,
+	&sensor_dev_attr_fan2_min.dev_attr.attr,
+	&sensor_dev_attr_fan3_min.dev_attr.attr,
+	&sensor_dev_attr_fan4_min.dev_attr.attr,
+	&sensor_dev_attr_fan1_input.dev_attr.attr,
+	&sensor_dev_attr_fan2_input.dev_attr.attr,
+	&sensor_dev_attr_fan3_input.dev_attr.attr,
+	&sensor_dev_attr_fan4_input.dev_attr.attr,
+	&sensor_dev_attr_fan1_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan2_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan3_alarm.dev_attr.attr,
+	&sensor_dev_attr_fan4_alarm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm_use_point2_pwm_at_crit.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1.dev_attr.attr,
+	&sensor_dev_attr_pwm2.dev_attr.attr,
+	&sensor_dev_attr_pwm3.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point1_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_point2_pwm.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_point2_pwm.dev_attr.attr,
+
+	&sensor_dev_attr_pwm1_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm2_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm3_enable.dev_attr.attr,
+	&sensor_dev_attr_pwm1_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm2_auto_channels_temp.dev_attr.attr,
+	&sensor_dev_attr_pwm3_auto_channels_temp.dev_attr.attr,
+
+	NULL
+};
+
+static int adt7473_attach_adapter(struct i2c_adapter *adapter)
+{
+	/*
+	 * Some NVIDIA cards have an adt7473 attached to the on-board
+	 * i2c controller, but the i2c adapter driver in the binary
+	 * nvidia superblob driver sets class to 0.
+	 */
+	if (!(adapter->class & I2C_CLASS_HWMON) && adapter->class)
+		return 0;
+	return i2c_probe(adapter, &addr_data, adt7473_detect);
+}
+
+static int adt7473_detect(struct i2c_adapter *adapter, int address, int kind)
+{
+	struct i2c_client *client;
+	struct adt7473_data *data;
+	int err = 0;
+
+	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
+		goto exit;
+
+	data = kzalloc(sizeof(struct adt7473_data), GFP_KERNEL);
+	if (!data) {
+		err = -ENOMEM;
+		goto exit;
+	}
+
+	client = &data->client;
+	client->addr = address;
+	client->adapter = adapter;
+	client->driver = &adt7473_driver;
+
+	i2c_set_clientdata(client, data);
+
+	mutex_init(&data->lock);
+
+	if (kind <= 0) {
+		int vendor, device, revision;
+
+		vendor = i2c_smbus_read_byte_data(client, ADT7473_REG_VENDOR);
+		if (vendor != ADT7473_VENDOR) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+
+		device = i2c_smbus_read_byte_data(client, ADT7473_REG_DEVICE);
+		if (device != ADT7473_DEVICE) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+
+		revision = i2c_smbus_read_byte_data(client,
+						    ADT7473_REG_REVISION);
+		if (revision != ADT7473_REV_68 && revision != ADT7473_REV_69) {
+			err = -ENODEV;
+			goto exit_free;
+		}
+	} else
+		dev_dbg(&adapter->dev, "detection forced\n");
+
+	strlcpy(client->name, "adt7473", I2C_NAME_SIZE);
+
+	err = i2c_attach_client(client);
+	if (err)
+		goto exit_free;
+
+	dev_info(&client->dev, "%s chip found\n", client->name);
+
+	/* Initialize the ADT7473 chip */
+	adt7473_init_client(client);
+
+	/* Register sysfs hooks */
+	data->attrs.attrs = adt7473_attr;
+	err = sysfs_create_group(&client->dev.kobj, &data->attrs);
+	if (err)
+		goto exit_detach;
+
+	data->hwmon_dev = hwmon_device_register(&client->dev);
+	if (IS_ERR(data->hwmon_dev)) {
+		err = PTR_ERR(data->hwmon_dev);
+		goto exit_remove;
+	}
+
+	return 0;
+
+exit_remove:
+	sysfs_remove_group(&client->dev.kobj, &data->attrs);
+exit_detach:
+	i2c_detach_client(client);
+exit_free:
+	kfree(data);
+exit:
+	return err;
+}
+
+static int adt7473_detach_client(struct i2c_client *client)
+{
+	struct adt7473_data *data = i2c_get_clientdata(client);
+
+	hwmon_device_unregister(data->hwmon_dev);
+	sysfs_remove_group(&client->dev.kobj, &data->attrs);
+	i2c_detach_client(client);
+	kfree(data);
+	return 0;
+}
+
+static int __init adt7473_init(void)
+{
+	return i2c_add_driver(&adt7473_driver);
+}
+
+static void __exit adt7473_exit(void)
+{
+	i2c_del_driver(&adt7473_driver);
+}
+
+MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>");
+MODULE_DESCRIPTION("ADT7473 driver");
+MODULE_LICENSE("GPL");
+
+module_init(adt7473_init);
+module_exit(adt7473_exit);

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2008-02-19 10:01 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2007-12-19  3:41 [PATCH] adt7473: New driver for Analog Devices ADT7473 sensor chip Darrick J. Wong
     [not found] ` <20071219154759.7be5025c@hyperion.delvare>
2007-12-19 23:14   ` Darrick J. Wong
2008-02-17 20:02     ` [lm-sensors] " Mark M. Hoffman
2008-02-18 21:32       ` Darrick J. Wong
2008-02-19  9:52         ` Jean Delvare
2008-02-18 21:33       ` [PATCH v2] " Darrick J. Wong
2008-02-19  3:06         ` [lm-sensors] " Mark M. Hoffman
2008-02-19  9:53       ` [PATCH] " Jean Delvare

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).