at program breaks with kernel 2.6.24

LKML Archive on lore.kernel.org
help / color / mirror / Atom feed

* at program breaks with kernel 2.6.24
@ 2008-02-27 12:27 BuraphaLinux Server
  2008-02-27 13:41 ` Jiri Kosina
  2008-02-27 18:17 ` serge
  0 siblings, 2 replies; 10+ messages in thread
From: BuraphaLinux Server @ 2008-02-27 12:27 UTC (permalink / raw)
  To: linux-kernel

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669

I have the same problem - it is not debian specific.  Did the
semantics of kill() change with the new kernel?  I thought as long as
something is setuid, even with capability stuff around the setuid
programs just get _all_ capabilities and would keep working.

I did a good search and found many people with the problem, but no
solutions except going back to 2.6.23.x kernels.  I guess you'll flame
me, but at least include a link to the solution too.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-27 12:27 at program breaks with kernel 2.6.24 BuraphaLinux Server
@ 2008-02-27 13:41 ` Jiri Kosina
  2008-02-27 18:17 ` serge
  1 sibling, 0 replies; 10+ messages in thread
From: Jiri Kosina @ 2008-02-27 13:41 UTC (permalink / raw)
  To: BuraphaLinux Server; +Cc: linux-kernel

On Wed, 27 Feb 2008, BuraphaLinux Server wrote:

> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> I have the same problem - it is not debian specific.  Did the
> semantics of kill() change with the new kernel?  I thought as long as
> something is setuid, even with capability stuff around the setuid
> programs just get _all_ capabilities and would keep working.

Does this still happen to you with current mainline? If so, what is your 
.config? It works for me(TM):

read(0, "/bin/echo \"aaa\"\n", 1024)    = 16
write(2, "at> ", 4)                     = 4
read(0, "", 1024)                       = 0
write(2, "<EOT>\n", 6)                  = 6
write(4, "#!/bin/sh\n# atrun uid=1000 gid=1"..., 4076) = 4076
close(4)                                = 0
munmap(0x7f068f383000, 4096)            = 0
fchmod(5, 0700)                         = 0
close(5)                                = 0
stat("/etc/localtime", {st_mode=S_IFREG|0644, st_size=2246, ...}) = 0
write(2, "job 1 at 2008-02-27 14:42\n", 26) = 26
open("/var/run/atd.pid", O_RDONLY)      = 3
fstat(3, {st_mode=S_IFREG|0644, st_size=5, ...}) = 0
fcntl(3, F_GETFL)                       = 0x8000 (flags 
O_RDONLY|O_LARGEFILE)
fstat(3, {st_mode=S_IFREG|0644, st_size=5, ...}) = 0
mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 
0x7f068f383000
lseek(3, 0, SEEK_CUR)                   = 0
read(3, "5679\n", 4096)                 = 5
setreuid(1000, 25)                      = 0
setregid(100, 25)                       = 0
kill(5679, SIGHUP)                      = 0

(this is 2.6.25-rc3).

-- 
Jiri Kosina
SUSE Labs


^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-27 12:27 at program breaks with kernel 2.6.24 BuraphaLinux Server
  2008-02-27 13:41 ` Jiri Kosina
@ 2008-02-27 18:17 ` serge
  2008-02-27 19:36   ` Frans Pop
  2008-02-27 19:47   ` BuraphaLinux Server
  1 sibling, 2 replies; 10+ messages in thread
From: serge @ 2008-02-27 18:17 UTC (permalink / raw)
  To: BuraphaLinux Server; +Cc: linux-kernel

Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> 
> I have the same problem - it is not debian specific.  Did the
> semantics of kill() change with the new kernel?  I thought as long as
> something is setuid, even with capability stuff around the setuid
> programs just get _all_ capabilities and would keep working.
> 
> I did a good search and found many people with the problem, but no
> solutions except going back to 2.6.23.x kernels.  I guess you'll flame
> me, but at least include a link to the solution too.

Why would we flame you?  I'll just apologize as I think it's my fault,
and ask you to please try the newest available kernel where I believe it
should be fixed.

thanks,
-serge

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-27 18:17 ` serge
@ 2008-02-27 19:36   ` Frans Pop
  2008-02-27 19:47   ` BuraphaLinux Server
  1 sibling, 0 replies; 10+ messages in thread
From: Frans Pop @ 2008-02-27 19:36 UTC (permalink / raw)
  To: serge; +Cc: buraphalinuxserver, linux-kernel

serge@hallyn.com wrote:
> Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
>> http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
>> 
>> I have the same problem - it is not debian specific.  Did the
>> semantics of kill() change with the new kernel?  I thought as long as
>> something is setuid, even with capability stuff around the setuid
>> programs just get _all_ capabilities and would keep working.
>> 
>> I did a good search and found many people with the problem, but no
>> solutions except going back to 2.6.23.x kernels.  I guess you'll flame
>> me, but at least include a link to the solution too.
> 
> Why would we flame you?  I'll just apologize as I think it's my fault,
> and ask you to please try the newest available kernel where I believe it
> should be fixed.

Would it be this commit that fixed this issue?
commit 094972840f2e7c1c6fc9e1a97d817cc17085378e
Author: Serge E. Hallyn <serue@us.ibm.com>
Date:   Sat Feb 23 15:23:33 2008 -0800
    file capabilities: simplify signal check

I see stable was CCed on it, so I guess it will be included in the next
point release, but distributions may want to apply it earlier.

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-27 18:17 ` serge
  2008-02-27 19:36   ` Frans Pop
@ 2008-02-27 19:47   ` BuraphaLinux Server
  2008-02-28  3:00     ` serge
  1 sibling, 1 reply; 10+ messages in thread
From: BuraphaLinux Server @ 2008-02-27 19:47 UTC (permalink / raw)
  To: serge; +Cc: linux-kernel

[-- Attachment #1: Type: text/plain, Size: 3061 bytes --]

This is gmail which has broken line wrapping I cannot fix. Anyway, I
did build the new kernel but it still does not work for me. I tried to
strace, but that didn't work for me either. This is as a non-root user
(and same 'at'/'atd' binaries work on 2.6.23.X):

bash-3.2$ at now
warning: commands will be executed using /bin/sh
at> echo "suid is busted"
at> <EOT>
job 4 at Thu Feb 28 02:16:00 2008
Can't signal atd (permission denied)
bash-3.2$ ls -ld $(which at)
-rws--x--x 1 daemon daemon 36468 Jan 11 15:37 /usr/bin/at
bash-3.2$ ps -ef | grep atd
daemon 2874 1 0 02:14 ? 00:00:00 /usr/sbin/atd -b 15 -l 1
bozo 3054 3049 0 02:16 pts/0 00:00:00 grep atd
bash-3.2$ ls -ld /var/spool/at*
drwxrwxrwt 2 daemon daemon 4096 Feb 28 02:16 /var/spool/atjobs
drwx------ 2 daemon daemon 4096 Feb 27 20:02 /var/spool/atspool
bash-3.2$ uname -a
Linux zappaman.cs.buu.ac.th 2.6.25-rc3 #1 SMP Thu Feb 28 01:29:46 ICT
2008 i686 pentium4 i386 GNU/Linux
bash-3.2$ strace -s 99999 -v -o /tmp/pain at now
warning: commands will be executed using /bin/sh
Cannot open lockfile /var/spool/atjobs/.SEQ: Permission denied
bash-3.2$ at now
warning: commands will be executed using /bin/sh
at> echo "hi"
at> <EOT>
job 7 at Thu Feb 28 02:19:00 2008
Can't signal atd (permission denied)

My kenrel .config is big, so it is attached so I don't get any cut and
paste error.

On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> >
> > I have the same problem - it is not debian specific. Did the
> > semantics of kill() change with the new kernel? I thought as long as
> > something is setuid, even with capability stuff around the setuid
> > programs just get _all_ capabilities and would keep working.
> >
> > I did a good search and found many people with the problem, but no
> > solutions except going back to 2.6.23.x kernels. I guess you'll flame
> > me, but at least include a link to the solution too.
>
> Why would we flame you?

Because maybe I'm doing something stupid and didn't patch/rebuild
something when changing kernels like I should.  I haven't had trouble
with at for many years of kernel changes, but 2.6.24 was the first
with the new security stuff and maybe I need to have some
capability-aware 'at' program?

>                                          I'll just apologize as I think it's my fault,
> and ask you to please try the newest available kernel where I believe it
> should be fixed.

Do I need to recompile glibc and the at software to adjust so some
kernel interface changes?  Did the 'make oldconfig' generate some bad
config combination?  As root it works, so I don't think the at or atd
are broken (but maybe they have to be patched for >2.6.23.X ?)

bash-3.2$ su - root
Password:
BLS #at now
warning: commands will be executed using /bin/sh
at> echo "uh-huh..."
at> <EOT>
job 8 at Thu Feb 28 02:30:00 2008

(and I checked and the job completes normally)

> thanks,
> -serge

Thank you for reading.  Any ideas on what to try next?

[-- Attachment #2: config-2.6.25-rc3.smp --]
[-- Type: application/octet-stream, Size: 56746 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc3
# Thu Feb 28 00:56:32 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_SEMAPHORE_SLEEPERS=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_DMI=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
# CONFIG_USER_SCHED is not set
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=m
CONFIG_IOSCHED_DEADLINE=m
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_CLASSIC_RCU=y
# CONFIG_PREEMPT_RCU is not set

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
CONFIG_MPENTIUMIII=y
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
# CONFIG_RCU_TRACE is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
# CONFIG_HIGHMEM4G is not set
CONFIG_HIGHMEM64G=y
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_X86_PAE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_HIGHPTE=y
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
# CONFIG_EFI is not set
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_HZ_1000=y
CONFIG_HZ=1000
CONFIG_SCHED_HRTICK=y
# CONFIG_KEXEC is not set
# CONFIG_CRASH_DUMP is not set
CONFIG_PHYSICAL_START=0x100000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
# CONFIG_HOTPLUG_CPU is not set
# CONFIG_COMPAT_VDSO is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_LEGACY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_WMI=m
CONFIG_ACPI_ASUS=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_CUSTOM_DSDT_INITRD is not set
CONFIG_ACPI_BLACKLIST_YEAR=2002
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
# CONFIG_ACPI_CONTAINER is not set
# CONFIG_ACPI_SBS is not set

#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=m
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m

#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_POWERNOW_K7=m
CONFIG_X86_POWERNOW_K7_ACPI=y
CONFIG_X86_POWERNOW_K8=m
CONFIG_X86_POWERNOW_K8_ACPI=y
CONFIG_X86_GX_SUSPMOD=m
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
CONFIG_X86_SPEEDSTEP_ICH=m
CONFIG_X86_SPEEDSTEP_SMI=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_CPUFREQ_NFORCE2=m
CONFIG_X86_LONGRUN=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_E_POWERSAVER=m

#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
CONFIG_X86_SPEEDSTEP_LIB=m
# CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK is not set
# CONFIG_CPU_IDLE is not set

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCIEPORTBUS=y
CONFIG_PCIEAER=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y

#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
# CONFIG_HOTPLUG_PCI is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
CONFIG_TCP_CONG_BIC=m
CONFIG_TCP_CONG_CUBIC=m
CONFIG_TCP_CONG_WESTWOOD=m
CONFIG_TCP_CONG_HTCP=m
CONFIG_TCP_CONG_HSTCP=m
CONFIG_TCP_CONG_HYBLA=m
CONFIG_TCP_CONG_VEGAS=m
CONFIG_TCP_CONG_SCALABLE=m
CONFIG_TCP_CONG_LP=m
CONFIG_TCP_CONG_VENO=m
CONFIG_TCP_CONG_YEAH=m
CONFIG_TCP_CONG_ILLINOIS=m
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
# CONFIG_DEFAULT_VEGAS is not set
# CONFIG_DEFAULT_WESTWOOD is not set
CONFIG_DEFAULT_RENO=y
CONFIG_DEFAULT_TCP_CONG="reno"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_NETLABEL is not set
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
# CONFIG_NF_CONNTRACK_EVENTS is not set
CONFIG_NF_CT_PROTO_GRE=m
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
# CONFIG_NF_NAT_SNMP_BASIC is not set
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_FTP=m
CONFIG_NF_NAT_IRC=m
CONFIG_NF_NAT_TFTP=m
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
# CONFIG_IP_NF_TARGET_CLUSTERIP is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
CONFIG_LLC2=m
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=y
CONFIG_NET_SCH_HTB=y
CONFIG_NET_SCH_HFSC=y
CONFIG_NET_SCH_PRIO=y
CONFIG_NET_SCH_RR=m
CONFIG_NET_SCH_RED=y
CONFIG_NET_SCH_SFQ=y
CONFIG_NET_SCH_TEQL=y
CONFIG_NET_SCH_TBF=y
CONFIG_NET_SCH_GRED=y
CONFIG_NET_SCH_DSMARK=y
# CONFIG_NET_SCH_NETEM is not set
CONFIG_NET_SCH_INGRESS=y

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=y
CONFIG_NET_CLS_TCINDEX=y
CONFIG_NET_CLS_ROUTE4=y
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=y
CONFIG_NET_CLS_U32=y
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=y
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_FLOW=m
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=y
CONFIG_NET_EMATCH_NBYTE=y
CONFIG_NET_EMATCH_U32=y
CONFIG_NET_EMATCH_META=y
CONFIG_NET_EMATCH_TEXT=y
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=y
CONFIG_NET_ACT_GACT=y
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=y
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=y
# CONFIG_NET_ACT_SIMP is not set
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=m
CONFIG_NL80211=y
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set

#
# Selecting 'y' for an algorithm will
#

#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_SIMPLE is not set
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_IEEE80211_SOFTMAC=m
# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
# CONFIG_PARPORT_SERIAL is not set
# CONFIG_PARPORT_PC_FIFO is not set
# CONFIG_PARPORT_PC_SUPERIO is not set
# CONFIG_PARPORT_PC_PCMCIA is not set
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
CONFIG_PNP_DEBUG=y

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
CONFIG_BLK_DEV_FD=y
# CONFIG_PARIDE is not set
CONFIG_BLK_CPQ_DA=y
CONFIG_BLK_CPQ_CISS_DA=y
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=y
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_SX8=y
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=7777
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
CONFIG_EEPROM_93CX6=m
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ACER_WMI is not set
CONFIG_ASUS_LAPTOP=m
CONFIG_FUJITSU_LAPTOP=m
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
# CONFIG_BLK_DEV_HD_IDE is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
# CONFIG_BLK_DEV_IDECS is not set
# CONFIG_BLK_DEV_DELKIN is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=m
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
CONFIG_BLK_DEV_CMD640=y
# CONFIG_BLK_DEV_CMD640_ENHANCED is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
CONFIG_BLK_DEV_ATIIXP=y
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_TRIFLEX=y
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
CONFIG_BLK_DEV_CS5530=y
CONFIG_BLK_DEV_CS5535=y
CONFIG_BLK_DEV_HPT34X=y
# CONFIG_HPT34X_AUTODMA is not set
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_JMICRON=y
CONFIG_BLK_DEV_SC1200=y
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_IT8213=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_NS87415=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=y
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
CONFIG_BLK_DEV_TRM290=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_BLK_DEV_TC86C001=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_IDE_ARCH_OBSOLETE_INIT=y
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=y
CONFIG_SCSI_SAS_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=y
# CONFIG_SCSI_SAS_ATA is not set
CONFIG_SCSI_SAS_HOST_SMP=y
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
CONFIG_SCSI_AIC7XXX=y
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=15000
# CONFIG_AIC7XXX_DEBUG_ENABLE is not set
CONFIG_AIC7XXX_DEBUG_MASK=2047
CONFIG_AIC7XXX_REG_PRETTY_PRINT=y
# CONFIG_SCSI_AIC7XXX_OLD is not set
CONFIG_SCSI_AIC79XX=y
CONFIG_AIC79XX_CMDS_PER_DEVICE=32
CONFIG_AIC79XX_RESET_DELAY_MS=15000
# CONFIG_AIC79XX_DEBUG_ENABLE is not set
CONFIG_AIC79XX_DEBUG_MASK=16383
CONFIG_AIC79XX_REG_PRETTY_PRINT=y
CONFIG_SCSI_AIC94XX=y
# CONFIG_AIC94XX_DEBUG is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
CONFIG_SCSI_IPS=y
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
CONFIG_SCSI_MVSAS=m
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
CONFIG_SCSI_LOWLEVEL_PCMCIA=y
# CONFIG_PCMCIA_AHA152X is not set
# CONFIG_PCMCIA_FDOMAIN is not set
# CONFIG_PCMCIA_NINJA_SCSI is not set
# CONFIG_PCMCIA_QLOGIC is not set
# CONFIG_PCMCIA_SYM53C500 is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_AHCI=y
CONFIG_SATA_SVW=y
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
CONFIG_SATA_NV=y
CONFIG_PDC_ADMA=y
CONFIG_SATA_QSTOR=y
CONFIG_SATA_PROMISE=y
CONFIG_SATA_SX4=y
CONFIG_SATA_SIL=y
CONFIG_SATA_SIL24=y
CONFIG_SATA_SIS=y
CONFIG_SATA_ULI=y
CONFIG_SATA_VIA=y
CONFIG_SATA_VITESSE=y
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
CONFIG_PATA_AMD=y
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
CONFIG_PATA_EFAR=y
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
CONFIG_PATA_IT821X=y
# CONFIG_PATA_IT8213 is not set
CONFIG_PATA_JMICRON=y
CONFIG_PATA_TRIFLEX=y
CONFIG_PATA_MARVELL=y
CONFIG_PATA_MPIIX=y
# CONFIG_PATA_OLDPIIX is not set
CONFIG_PATA_NETCELL=y
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
CONFIG_PATA_RZ1000=y
# CONFIG_PATA_SC1200 is not set
CONFIG_PATA_SERVERWORKS=y
CONFIG_PATA_PDC2027X=y
CONFIG_PATA_SIL680=y
CONFIG_PATA_SIS=y
CONFIG_PATA_VIA=y
CONFIG_PATA_WINBOND=y
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
# CONFIG_DM_MULTIPATH is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
# CONFIG_FUSION_FC is not set
# CONFIG_FUSION_SAS is not set
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=m

#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set

#
# Controllers
#
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_OHCI1394=m

#
# Protocols
#
CONFIG_IEEE1394_VIDEO1394=m
# CONFIG_IEEE1394_SBP2 is not set
# CONFIG_IEEE1394_ETH1394_ROM_ENTRY is not set
# CONFIG_IEEE1394_ETH1394 is not set
# CONFIG_IEEE1394_DV1394 is not set
CONFIG_IEEE1394_RAWIO=m
CONFIG_I2O=m
CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y
CONFIG_I2O_EXT_ADAPTEC=y
CONFIG_I2O_EXT_ADAPTEC_DMA64=y
CONFIG_I2O_CONFIG=m
CONFIG_I2O_CONFIG_OLD_IOCTL=y
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_IFB=m
# CONFIG_DUMMY is not set
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_PCMCIA_XIRCOM is not set
CONFIG_HP100=m
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
# CONFIG_PCNET32_NAPI is not set
CONFIG_AMD8111_ETH=m
CONFIG_AMD8111E_NAPI=y
CONFIG_ADAPTEC_STARFIRE=m
# CONFIG_ADAPTEC_STARFIRE_NAPI is not set
CONFIG_B44=m
CONFIG_B44_PCI_AUTOSELECT=y
CONFIG_B44_PCICORE_AUTOSELECT=y
CONFIG_B44_PCI=y
CONFIG_FORCEDETH=m
# CONFIG_FORCEDETH_NAPI is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
CONFIG_8139TOO_TUNE_TWISTER=y
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
# CONFIG_R6040 is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
# CONFIG_VIA_RHINE_NAPI is not set
CONFIG_SC92031=m
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=m
CONFIG_E1000E_ENABLED=y
CONFIG_IP1000=m
CONFIG_IGB=m
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
# CONFIG_R8169_NAPI is not set
CONFIG_R8169_VLAN=y
CONFIG_SIS190=m
CONFIG_SKGE=m
# CONFIG_SKGE_DEBUG is not set
CONFIG_SKY2=m
# CONFIG_SKY2_DEBUG is not set
# CONFIG_SK98LIN is not set
CONFIG_VIA_VELOCITY=m
CONFIG_TIGON3=m
CONFIG_BNX2=m
CONFIG_QLA3XXX=m
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
CONFIG_CHELSIO_T1=m
CONFIG_CHELSIO_T1_1G=y
CONFIG_CHELSIO_T1_NAPI=y
CONFIG_CHELSIO_T3=m
CONFIG_IXGBE=m
CONFIG_IXGB=m
# CONFIG_IXGB_NAPI is not set
CONFIG_S2IO=m
# CONFIG_S2IO_NAPI is not set
CONFIG_MYRI10GE=m
CONFIG_NETXEN_NIC=m
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
CONFIG_TEHUTI=m
CONFIG_BNX2X=m
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_CS is not set
# CONFIG_LIBERTAS_SDIO is not set
# CONFIG_LIBERTAS_DEBUG is not set
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_PCMCIA_SPECTRUM=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PCMCIA_ATMEL=m
CONFIG_AIRO_CS=m
CONFIG_PCMCIA_WL3501=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
CONFIG_USB_NET_RNDIS_WLAN=m
CONFIG_RTL8180=m
CONFIG_RTL8187=m
CONFIG_ADM8211=m
CONFIG_P54_COMMON=m
CONFIG_P54_USB=m
CONFIG_P54_PCI=m
CONFIG_ATH5K=m
CONFIG_IWL4965=m
# CONFIG_IWL4965_QOS is not set
# CONFIG_IWL4965_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL4965_SENSITIVITY is not set
# CONFIG_IWL4965_DEBUG is not set
CONFIG_IWL3945=m
# CONFIG_IWL3945_QOS is not set
# CONFIG_IWL3945_SPECTRUM_MEASUREMENT is not set
# CONFIG_IWL3945_DEBUG is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
# CONFIG_HOSTAP_FIRMWARE_NVRAM is not set
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
CONFIG_HOSTAP_CS=m
CONFIG_BCM43XX=m
CONFIG_BCM43XX_DEBUG=y
CONFIG_BCM43XX_DMA=y
CONFIG_BCM43XX_PIO=y
CONFIG_BCM43XX_DMA_AND_PIO_MODE=y
# CONFIG_BCM43XX_DMA_MODE is not set
# CONFIG_BCM43XX_PIO_MODE is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
CONFIG_B43_PCICORE_AUTOSELECT=y
# CONFIG_B43_PCMCIA is not set
# CONFIG_B43_DEBUG is not set
CONFIG_B43LEGACY=m
CONFIG_B43LEGACY_PCI_AUTOSELECT=y
CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y
# CONFIG_B43LEGACY_DEBUG is not set
CONFIG_B43LEGACY_DMA=y
CONFIG_B43LEGACY_PIO=y
CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y
# CONFIG_B43LEGACY_DMA_MODE is not set
# CONFIG_B43LEGACY_PIO_MODE is not set
CONFIG_ZD1211RW=m
# CONFIG_ZD1211RW_DEBUG is not set
CONFIG_RT2X00=m
CONFIG_RT2X00_LIB=m
CONFIG_RT2X00_LIB_PCI=m
CONFIG_RT2X00_LIB_USB=m
CONFIG_RT2X00_LIB_FIRMWARE=y
CONFIG_RT2400PCI=m
# CONFIG_RT2400PCI_RFKILL is not set
CONFIG_RT2500PCI=m
# CONFIG_RT2500PCI_RFKILL is not set
CONFIG_RT61PCI=m
# CONFIG_RT61PCI_RFKILL is not set
CONFIG_RT2500USB=m
CONFIG_RT73USB=m
# CONFIG_RT2X00_DEBUG is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
CONFIG_USB_NET_DM9601=m
CONFIG_USB_NET_GL620A=m
CONFIG_USB_NET_NET1080=m
CONFIG_USB_NET_PLUSB=m
CONFIG_USB_NET_MCS7830=m
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
# CONFIG_USB_EPSON2888 is not set
CONFIG_USB_KC2190=y
CONFIG_USB_NET_ZAURUS=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=m
CONFIG_SERIAL_8250_PNP=m
# CONFIG_SERIAL_8250_CS is not set
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
# CONFIG_PPDEV is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_GEODE=m
CONFIG_HW_RANDOM_VIA=m
# CONFIG_NVRAM is not set
CONFIG_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set

#
# PCMCIA character devices
#
# CONFIG_SYNCLINK_CS is not set
# CONFIG_CARDMAN_4000 is not set
# CONFIG_CARDMAN_4040 is not set
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=m
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m

#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
# CONFIG_I2C_AMD756_S4882 is not set
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PARPORT is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
# CONFIG_SCx200_ACB is not set
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_TINY_USB is not set
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
# CONFIG_I2C_VOODOO3 is not set

#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_TPS65010 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set

#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=m
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
CONFIG_SENSORS_APPLESMC=m
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set

#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
# CONFIG_I6300ESB_WDT is not set
CONFIG_ITCO_WDT=m
# CONFIG_ITCO_VENDOR_SUPPORT is not set
# CONFIG_IT8712F_WDT is not set
CONFIG_HP_WATCHDOG=m
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_SBC7240_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set

#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set

#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_PCIHOST_POSSIBLE=y
CONFIG_SSB_PCIHOST=y
CONFIG_SSB_PCMCIAHOST_POSSIBLE=y
# CONFIG_SSB_PCMCIAHOST is not set
# CONFIG_SSB_DEBUG is not set
CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y
CONFIG_SSB_DRIVER_PCICORE=y

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_ALI=m
CONFIG_AGP_ATI=m
CONFIG_AGP_AMD=m
CONFIG_AGP_AMD64=m
CONFIG_AGP_INTEL=m
CONFIG_AGP_NVIDIA=m
CONFIG_AGP_SIS=m
CONFIG_AGP_SWORKS=m
CONFIG_AGP_VIA=m
CONFIG_AGP_EFFICEON=m
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
CONFIG_DRM_VIA=m
CONFIG_DRM_SAVAGE=m
CONFIG_VGASTATE=m
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_DDC=m
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_SYS_FOPS is not set
CONFIG_FB_DEFERRED_IO=y
CONFIG_FB_SVGALIB=m
# CONFIG_FB_MACMODES is not set
CONFIG_FB_BACKLIGHT=y
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y

#
# Frame buffer hardware drivers
#
CONFIG_FB_CIRRUS=m
CONFIG_FB_PM2=m
# CONFIG_FB_PM2_FIFO_DISCONNECT is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
CONFIG_FB_VGA16=m
# CONFIG_FB_HECUBA is not set
# CONFIG_FB_HGA is not set
CONFIG_FB_S1D13XXX=m
CONFIG_FB_NVIDIA=m
CONFIG_FB_NVIDIA_I2C=y
# CONFIG_FB_NVIDIA_DEBUG is not set
CONFIG_FB_NVIDIA_BACKLIGHT=y
CONFIG_FB_RIVA=m
CONFIG_FB_RIVA_I2C=y
# CONFIG_FB_RIVA_DEBUG is not set
CONFIG_FB_RIVA_BACKLIGHT=y
CONFIG_FB_I810=m
# CONFIG_FB_I810_GTF is not set
CONFIG_FB_LE80578=m
CONFIG_FB_CARILLO_RANCH=m
CONFIG_FB_INTEL=m
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G=y
CONFIG_FB_MATROX_I2C=m
# CONFIG_FB_MATROX_MAVEN is not set
# CONFIG_FB_MATROX_MULTIHEAD is not set
CONFIG_FB_RADEON=m
CONFIG_FB_RADEON_I2C=y
CONFIG_FB_RADEON_BACKLIGHT=y
# CONFIG_FB_RADEON_DEBUG is not set
CONFIG_FB_ATY128=m
CONFIG_FB_ATY128_BACKLIGHT=y
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GENERIC_LCD=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_ATY_BACKLIGHT=y
CONFIG_FB_S3=m
CONFIG_FB_SAVAGE=m
CONFIG_FB_SAVAGE_I2C=y
# CONFIG_FB_SAVAGE_ACCEL is not set
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_KYRO=m
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
CONFIG_FB_VT8623=m
CONFIG_FB_CYBLA=m
CONFIG_FB_TRIDENT=m
# CONFIG_FB_TRIDENT_ACCEL is not set
CONFIG_FB_ARK=m
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set
# CONFIG_BACKLIGHT_CARILLO_RANCH is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_7x14 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
# CONFIG_FONT_MINI_4x6 is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
# CONFIG_SND is not set

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=y
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
CONFIG_USB_DEBUG=y
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_PERSIST is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
CONFIG_USB_ISP116X_HCD=y
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
CONFIG_USB_SL811_HCD=y
# CONFIG_USB_SL811_CS is not set
CONFIG_USB_R8A66597_HCD=y

#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
CONFIG_USB_STORAGE_KARMA=y
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set

#
# MMC/SD Host Controller Drivers
#
# CONFIG_MMC_SDHCI is not set
CONFIG_MMC_WBSD=m
# CONFIG_MMC_TIFM_SD is not set
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m

#
# LED drivers
#
# CONFIG_LEDS_CLEVO_MAIL is not set

#
# LED Triggers
#
# CONFIG_LEDS_TRIGGERS is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_AUXDISPLAY is not set

#
# Userspace I/O
#
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y

#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4DEV_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
# CONFIG_JFS_DEBUG is not set
# CONFIG_JFS_STATISTICS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_SECURITY=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
CONFIG_OCFS2_FS=m
CONFIG_OCFS2_DEBUG_MASKLOG=y
# CONFIG_OCFS2_DEBUG_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
# CONFIG_QUOTA_NETLINK_INTERFACE is not set
CONFIG_PRINT_QUOTA_WARNING=y
# CONFIG_QFMT_V1 is not set
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLBFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_CONFIGFS_FS=m

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
# CONFIG_NFS_V4 is not set
# CONFIG_NFS_DIRECTIO is not set
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
# CONFIG_NFSD_V4 is not set
CONFIG_NFSD_TCP=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
# CONFIG_PARTITION_ADVANCED is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="cp874"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
CONFIG_NLS_CODEPAGE_874=y
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
CONFIG_DEBUG_FS=y
CONFIG_HEADERS_CHECK=y
# CONFIG_DEBUG_KERNEL is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_WP512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_CCM=m
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_586=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_586=m
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_PADLOCK is not set
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=y
CONFIG_TEXTSEARCH_BM=y
CONFIG_TEXTSEARCH_FSM=y
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-27 19:47   ` BuraphaLinux Server
@ 2008-02-28  3:00     ` serge
  2008-02-28  5:23       ` BuraphaLinux Server
  0 siblings, 1 reply; 10+ messages in thread
From: serge @ 2008-02-28  3:00 UTC (permalink / raw)
  To: BuraphaLinux Server; +Cc: serge, linux-kernel

Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> This is gmail which has broken line wrapping I cannot fix. Anyway, I
> did build the new kernel but it still does not work for me. I tried to
> strace, but that didn't work for me either. This is as a non-root user
> (and same 'at'/'atd' binaries work on 2.6.23.X):
> 
> bash-3.2$ at now
> warning: commands will be executed using /bin/sh
> at> echo "suid is busted"
> at> <EOT>
> job 4 at Thu Feb 28 02:16:00 2008
> Can't signal atd (permission denied)
> bash-3.2$ ls -ld $(which at)
> -rws--x--x 1 daemon daemon 36468 Jan 11 15:37 /usr/bin/at
> bash-3.2$ ps -ef | grep atd
> daemon 2874 1 0 02:14 ? 00:00:00 /usr/sbin/atd -b 15 -l 1
> bozo 3054 3049 0 02:16 pts/0 00:00:00 grep atd
> bash-3.2$ ls -ld /var/spool/at*
> drwxrwxrwt 2 daemon daemon 4096 Feb 28 02:16 /var/spool/atjobs
> drwx------ 2 daemon daemon 4096 Feb 27 20:02 /var/spool/atspool
> bash-3.2$ uname -a
> Linux zappaman.cs.buu.ac.th 2.6.25-rc3 #1 SMP Thu Feb 28 01:29:46 ICT
> 2008 i686 pentium4 i386 GNU/Linux
> bash-3.2$ strace -s 99999 -v -o /tmp/pain at now
> warning: commands will be executed using /bin/sh
> Cannot open lockfile /var/spool/atjobs/.SEQ: Permission denied
> bash-3.2$ at now
> warning: commands will be executed using /bin/sh
> at> echo "hi"
> at> <EOT>
> job 7 at Thu Feb 28 02:19:00 2008
> Can't signal atd (permission denied)
> 
> My kenrel .config is big, so it is attached so I don't get any cut and
> paste error.
> 
> On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> > >
> > > I have the same problem - it is not debian specific. Did the
> > > semantics of kill() change with the new kernel? I thought as long as
> > > something is setuid, even with capability stuff around the setuid
> > > programs just get _all_ capabilities and would keep working.
> > >
> > > I did a good search and found many people with the problem, but no
> > > solutions except going back to 2.6.23.x kernels. I guess you'll flame
> > > me, but at least include a link to the solution too.
> >
> > Why would we flame you?
> 
> Because maybe I'm doing something stupid and didn't patch/rebuild
> something when changing kernels like I should.  I haven't had trouble
> with at for many years of kernel changes, but 2.6.24 was the first
> with the new security stuff and maybe I need to have some
> capability-aware 'at' program?
> 
> >                                          I'll just apologize as I think it's my fault,
> > and ask you to please try the newest available kernel where I believe it
> > should be fixed.
> 
> Do I need to recompile glibc and the at software to adjust so some
> kernel interface changes?  Did the 'make oldconfig' generate some bad
> config combination?  As root it works, so I don't think the at or atd
> are broken (but maybe they have to be patched for >2.6.23.X ?)
> 
> bash-3.2$ su - root
> Password:
> BLS #at now
> warning: commands will be executed using /bin/sh
> at> echo "uh-huh..."
> at> <EOT>
> job 8 at Thu Feb 28 02:30:00 2008
> 
> (and I checked and the job completes normally)
> 
> > thanks,
> > -serge
> 
> Thank you for reading.  Any ideas on what to try next?

I'm working on setting up something I can test this on better, but just
for good measure can you try the following patch?  It should simply
prevent the extra signal checks from happening.

thanks,
-serge

>From f48d28fe525652cb7321d5f545f9dcdfb3ce97d8 Mon Sep 17 00:00:00 2001
From: Serge Hallyn <serge@hallyn.com>
Date: Wed, 27 Feb 2008 20:53:47 +0000
Subject: [PATCH 1/1] file capabilities: get rid of cap_task_kill

This is just a test to not use cap_task_kill.  We will see whether
this fixes the atd problem

Signed-off-by: Serge Hallyn <serge@hallyn.com>
---
 include/linux/security.h |    2 +-
 security/capability.c    |    1 -
 2 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/include/linux/security.h b/include/linux/security.h
index fe52cde..4c43914 100644
--- a/include/linux/security.h
+++ b/include/linux/security.h
@@ -2138,7 +2138,7 @@ static inline int security_task_kill (struct task_struct *p,
 				      struct siginfo *info, int sig,
 				      u32 secid)
 {
-	return cap_task_kill(p, info, sig, secid);
+	return 0;
 }
 
 static inline int security_task_wait (struct task_struct *p)
diff --git a/security/capability.c b/security/capability.c
index 9e99f36..2c6e06d 100644
--- a/security/capability.c
+++ b/security/capability.c
@@ -40,7 +40,6 @@ static struct security_operations capability_ops = {
 	.inode_need_killpriv =		cap_inode_need_killpriv,
 	.inode_killpriv =		cap_inode_killpriv,
 
-	.task_kill =			cap_task_kill,
 	.task_setscheduler =		cap_task_setscheduler,
 	.task_setioprio =		cap_task_setioprio,
 	.task_setnice =			cap_task_setnice,
-- 
1.5.2.5



^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-28  3:00     ` serge
@ 2008-02-28  5:23       ` BuraphaLinux Server
  2008-02-28 14:54         ` serge
  2008-02-28 17:19         ` serge
  0 siblings, 2 replies; 10+ messages in thread
From: BuraphaLinux Server @ 2008-02-28  5:23 UTC (permalink / raw)
  To: serge; +Cc: linux-kernel

Thank you for the patch to try.  This patch works perfectly.  Is it
safe to apply this to 2.6.24.3?  I hope it is in 2.6.24.4


On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > This is gmail which has broken line wrapping I cannot fix. Anyway, I
> > did build the new kernel but it still does not work for me. I tried to
> > strace, but that didn't work for me either. This is as a non-root user
> > (and same 'at'/'atd' binaries work on 2.6.23.X):
> >
> > bash-3.2$ at now
> > warning: commands will be executed using /bin/sh
> > at> echo "suid is busted"
> > at> <EOT>
> > job 4 at Thu Feb 28 02:16:00 2008
> > Can't signal atd (permission denied)
> > bash-3.2$ ls -ld $(which at)
> > -rws--x--x 1 daemon daemon 36468 Jan 11 15:37 /usr/bin/at
> > bash-3.2$ ps -ef | grep atd
> > daemon 2874 1 0 02:14 ? 00:00:00 /usr/sbin/atd -b 15 -l 1
> > bozo 3054 3049 0 02:16 pts/0 00:00:00 grep atd
> > bash-3.2$ ls -ld /var/spool/at*
> > drwxrwxrwt 2 daemon daemon 4096 Feb 28 02:16 /var/spool/atjobs
> > drwx------ 2 daemon daemon 4096 Feb 27 20:02 /var/spool/atspool
> > bash-3.2$ uname -a
> > Linux zappaman.cs.buu.ac.th 2.6.25-rc3 #1 SMP Thu Feb 28 01:29:46 ICT
> > 2008 i686 pentium4 i386 GNU/Linux
> > bash-3.2$ strace -s 99999 -v -o /tmp/pain at now
> > warning: commands will be executed using /bin/sh
> > Cannot open lockfile /var/spool/atjobs/.SEQ: Permission denied
> > bash-3.2$ at now
> > warning: commands will be executed using /bin/sh
> > at> echo "hi"
> > at> <EOT>
> > job 7 at Thu Feb 28 02:19:00 2008
> > Can't signal atd (permission denied)
> >
> > My kenrel .config is big, so it is attached so I don't get any cut and
> > paste error.
> >
> > On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> > > >
> > > > I have the same problem - it is not debian specific. Did the
> > > > semantics of kill() change with the new kernel? I thought as long as
> > > > something is setuid, even with capability stuff around the setuid
> > > > programs just get _all_ capabilities and would keep working.
> > > >
> > > > I did a good search and found many people with the problem, but no
> > > > solutions except going back to 2.6.23.x kernels. I guess you'll flame
> > > > me, but at least include a link to the solution too.
> > >
> > > Why would we flame you?
> >
> > Because maybe I'm doing something stupid and didn't patch/rebuild
> > something when changing kernels like I should.  I haven't had trouble
> > with at for many years of kernel changes, but 2.6.24 was the first
> > with the new security stuff and maybe I need to have some
> > capability-aware 'at' program?
> >
> > >                                          I'll just apologize as I think
> it's my fault,
> > > and ask you to please try the newest available kernel where I believe it
> > > should be fixed.
> >
> > Do I need to recompile glibc and the at software to adjust so some
> > kernel interface changes?  Did the 'make oldconfig' generate some bad
> > config combination?  As root it works, so I don't think the at or atd
> > are broken (but maybe they have to be patched for >2.6.23.X ?)
> >
> > bash-3.2$ su - root
> > Password:
> > BLS #at now
> > warning: commands will be executed using /bin/sh
> > at> echo "uh-huh..."
> > at> <EOT>
> > job 8 at Thu Feb 28 02:30:00 2008
> >
> > (and I checked and the job completes normally)
> >
> > > thanks,
> > > -serge
> >
> > Thank you for reading.  Any ideas on what to try next?
>
> I'm working on setting up something I can test this on better, but just
> for good measure can you try the following patch?  It should simply
> prevent the extra signal checks from happening.
>
> thanks,
> -serge
>
> From f48d28fe525652cb7321d5f545f9dcdfb3ce97d8 Mon Sep 17 00:00:00 2001
> From: Serge Hallyn <serge@hallyn.com>
> Date: Wed, 27 Feb 2008 20:53:47 +0000
> Subject: [PATCH 1/1] file capabilities: get rid of cap_task_kill
>
> This is just a test to not use cap_task_kill.  We will see whether
> this fixes the atd problem
>
> Signed-off-by: Serge Hallyn <serge@hallyn.com>
> ---
>  include/linux/security.h |    2 +-
>  security/capability.c    |    1 -
>  2 files changed, 1 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/security.h b/include/linux/security.h
> index fe52cde..4c43914 100644
> --- a/include/linux/security.h
> +++ b/include/linux/security.h
> @@ -2138,7 +2138,7 @@ static inline int security_task_kill (struct
> task_struct *p,
>  				      struct siginfo *info, int sig,
>  				      u32 secid)
>  {
> -	return cap_task_kill(p, info, sig, secid);
> +	return 0;
>  }
>
>  static inline int security_task_wait (struct task_struct *p)
> diff --git a/security/capability.c b/security/capability.c
> index 9e99f36..2c6e06d 100644
> --- a/security/capability.c
> +++ b/security/capability.c
> @@ -40,7 +40,6 @@ static struct security_operations capability_ops = {
>  	.inode_need_killpriv =		cap_inode_need_killpriv,
>  	.inode_killpriv =		cap_inode_killpriv,
>
> -	.task_kill =			cap_task_kill,
>  	.task_setscheduler =		cap_task_setscheduler,
>  	.task_setioprio =		cap_task_setioprio,
>  	.task_setnice =			cap_task_setnice,
> --
> 1.5.2.5
>
>
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-28  5:23       ` BuraphaLinux Server
@ 2008-02-28 14:54         ` serge
  2008-02-28 17:19         ` serge
  1 sibling, 0 replies; 10+ messages in thread
From: serge @ 2008-02-28 14:54 UTC (permalink / raw)
  To: BuraphaLinux Server; +Cc: serge, linux-kernel

Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> Thank you for the patch to try.  This patch works perfectly.  Is it
> safe to apply this to 2.6.24.3?  I hope it is in 2.6.24.4

Hmm, in your 'uname -a' you showed 2.6.25-rc3.  I used
roughly 2.6.25-rc3 on a fedora 8 system and at worked
fine.  What distro are you using?  Looks like debian - any
particular version?  I'll have to try setting up another vm
(though I'm out of space... hmm) to test.

thanks,
-serge

> 
> 
> On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > This is gmail which has broken line wrapping I cannot fix. Anyway, I
> > > did build the new kernel but it still does not work for me. I tried to
> > > strace, but that didn't work for me either. This is as a non-root user
> > > (and same 'at'/'atd' binaries work on 2.6.23.X):
> > >
> > > bash-3.2$ at now
> > > warning: commands will be executed using /bin/sh
> > > at> echo "suid is busted"
> > > at> <EOT>
> > > job 4 at Thu Feb 28 02:16:00 2008
> > > Can't signal atd (permission denied)
> > > bash-3.2$ ls -ld $(which at)
> > > -rws--x--x 1 daemon daemon 36468 Jan 11 15:37 /usr/bin/at
> > > bash-3.2$ ps -ef | grep atd
> > > daemon 2874 1 0 02:14 ? 00:00:00 /usr/sbin/atd -b 15 -l 1
> > > bozo 3054 3049 0 02:16 pts/0 00:00:00 grep atd
> > > bash-3.2$ ls -ld /var/spool/at*
> > > drwxrwxrwt 2 daemon daemon 4096 Feb 28 02:16 /var/spool/atjobs
> > > drwx------ 2 daemon daemon 4096 Feb 27 20:02 /var/spool/atspool
> > > bash-3.2$ uname -a
> > > Linux zappaman.cs.buu.ac.th 2.6.25-rc3 #1 SMP Thu Feb 28 01:29:46 ICT
> > > 2008 i686 pentium4 i386 GNU/Linux
> > > bash-3.2$ strace -s 99999 -v -o /tmp/pain at now
> > > warning: commands will be executed using /bin/sh
> > > Cannot open lockfile /var/spool/atjobs/.SEQ: Permission denied
> > > bash-3.2$ at now
> > > warning: commands will be executed using /bin/sh
> > > at> echo "hi"
> > > at> <EOT>
> > > job 7 at Thu Feb 28 02:19:00 2008
> > > Can't signal atd (permission denied)
> > >
> > > My kenrel .config is big, so it is attached so I don't get any cut and
> > > paste error.
> > >
> > > On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > > > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> > > > >
> > > > > I have the same problem - it is not debian specific. Did the
> > > > > semantics of kill() change with the new kernel? I thought as long as
> > > > > something is setuid, even with capability stuff around the setuid
> > > > > programs just get _all_ capabilities and would keep working.
> > > > >
> > > > > I did a good search and found many people with the problem, but no
> > > > > solutions except going back to 2.6.23.x kernels. I guess you'll flame
> > > > > me, but at least include a link to the solution too.
> > > >
> > > > Why would we flame you?
> > >
> > > Because maybe I'm doing something stupid and didn't patch/rebuild
> > > something when changing kernels like I should.  I haven't had trouble
> > > with at for many years of kernel changes, but 2.6.24 was the first
> > > with the new security stuff and maybe I need to have some
> > > capability-aware 'at' program?
> > >
> > > >                                          I'll just apologize as I think
> > it's my fault,
> > > > and ask you to please try the newest available kernel where I believe it
> > > > should be fixed.
> > >
> > > Do I need to recompile glibc and the at software to adjust so some
> > > kernel interface changes?  Did the 'make oldconfig' generate some bad
> > > config combination?  As root it works, so I don't think the at or atd
> > > are broken (but maybe they have to be patched for >2.6.23.X ?)
> > >
> > > bash-3.2$ su - root
> > > Password:
> > > BLS #at now
> > > warning: commands will be executed using /bin/sh
> > > at> echo "uh-huh..."
> > > at> <EOT>
> > > job 8 at Thu Feb 28 02:30:00 2008
> > >
> > > (and I checked and the job completes normally)
> > >
> > > > thanks,
> > > > -serge
> > >
> > > Thank you for reading.  Any ideas on what to try next?
> >
> > I'm working on setting up something I can test this on better, but just
> > for good measure can you try the following patch?  It should simply
> > prevent the extra signal checks from happening.
> >
> > thanks,
> > -serge
> >
> > From f48d28fe525652cb7321d5f545f9dcdfb3ce97d8 Mon Sep 17 00:00:00 2001
> > From: Serge Hallyn <serge@hallyn.com>
> > Date: Wed, 27 Feb 2008 20:53:47 +0000
> > Subject: [PATCH 1/1] file capabilities: get rid of cap_task_kill
> >
> > This is just a test to not use cap_task_kill.  We will see whether
> > this fixes the atd problem
> >
> > Signed-off-by: Serge Hallyn <serge@hallyn.com>
> > ---
> >  include/linux/security.h |    2 +-
> >  security/capability.c    |    1 -
> >  2 files changed, 1 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/linux/security.h b/include/linux/security.h
> > index fe52cde..4c43914 100644
> > --- a/include/linux/security.h
> > +++ b/include/linux/security.h
> > @@ -2138,7 +2138,7 @@ static inline int security_task_kill (struct
> > task_struct *p,
> >  				      struct siginfo *info, int sig,
> >  				      u32 secid)
> >  {
> > -	return cap_task_kill(p, info, sig, secid);
> > +	return 0;
> >  }
> >
> >  static inline int security_task_wait (struct task_struct *p)
> > diff --git a/security/capability.c b/security/capability.c
> > index 9e99f36..2c6e06d 100644
> > --- a/security/capability.c
> > +++ b/security/capability.c
> > @@ -40,7 +40,6 @@ static struct security_operations capability_ops = {
> >  	.inode_need_killpriv =		cap_inode_need_killpriv,
> >  	.inode_killpriv =		cap_inode_killpriv,
> >
> > -	.task_kill =			cap_task_kill,
> >  	.task_setscheduler =		cap_task_setscheduler,
> >  	.task_setioprio =		cap_task_setioprio,
> >  	.task_setnice =			cap_task_setnice,
> > --
> > 1.5.2.5
> >
> >
> >

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-28  5:23       ` BuraphaLinux Server
  2008-02-28 14:54         ` serge
@ 2008-02-28 17:19         ` serge
  2008-02-28 17:51           ` BuraphaLinux Server
  1 sibling, 1 reply; 10+ messages in thread
From: serge @ 2008-02-28 17:19 UTC (permalink / raw)
  To: BuraphaLinux Server; +Cc: serge, linux-kernel

Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> Thank you for the patch to try.  This patch works perfectly.  Is it
> safe to apply this to 2.6.24.3?

I took care not to touch commoncap.c so that it should hopefully apply
cleanly to the past few kernels.

> I hope it is in 2.6.24.4

I'm getting ready to send out a more complete version of the patch.

thanks,
-serge

> On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > This is gmail which has broken line wrapping I cannot fix. Anyway, I
> > > did build the new kernel but it still does not work for me. I tried to
> > > strace, but that didn't work for me either. This is as a non-root user
> > > (and same 'at'/'atd' binaries work on 2.6.23.X):
> > >
> > > bash-3.2$ at now
> > > warning: commands will be executed using /bin/sh
> > > at> echo "suid is busted"
> > > at> <EOT>
> > > job 4 at Thu Feb 28 02:16:00 2008
> > > Can't signal atd (permission denied)
> > > bash-3.2$ ls -ld $(which at)
> > > -rws--x--x 1 daemon daemon 36468 Jan 11 15:37 /usr/bin/at
> > > bash-3.2$ ps -ef | grep atd
> > > daemon 2874 1 0 02:14 ? 00:00:00 /usr/sbin/atd -b 15 -l 1
> > > bozo 3054 3049 0 02:16 pts/0 00:00:00 grep atd
> > > bash-3.2$ ls -ld /var/spool/at*
> > > drwxrwxrwt 2 daemon daemon 4096 Feb 28 02:16 /var/spool/atjobs
> > > drwx------ 2 daemon daemon 4096 Feb 27 20:02 /var/spool/atspool
> > > bash-3.2$ uname -a
> > > Linux zappaman.cs.buu.ac.th 2.6.25-rc3 #1 SMP Thu Feb 28 01:29:46 ICT
> > > 2008 i686 pentium4 i386 GNU/Linux
> > > bash-3.2$ strace -s 99999 -v -o /tmp/pain at now
> > > warning: commands will be executed using /bin/sh
> > > Cannot open lockfile /var/spool/atjobs/.SEQ: Permission denied
> > > bash-3.2$ at now
> > > warning: commands will be executed using /bin/sh
> > > at> echo "hi"
> > > at> <EOT>
> > > job 7 at Thu Feb 28 02:19:00 2008
> > > Can't signal atd (permission denied)
> > >
> > > My kenrel .config is big, so it is attached so I don't get any cut and
> > > paste error.
> > >
> > > On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > > > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> > > > >
> > > > > I have the same problem - it is not debian specific. Did the
> > > > > semantics of kill() change with the new kernel? I thought as long as
> > > > > something is setuid, even with capability stuff around the setuid
> > > > > programs just get _all_ capabilities and would keep working.
> > > > >
> > > > > I did a good search and found many people with the problem, but no
> > > > > solutions except going back to 2.6.23.x kernels. I guess you'll flame
> > > > > me, but at least include a link to the solution too.
> > > >
> > > > Why would we flame you?
> > >
> > > Because maybe I'm doing something stupid and didn't patch/rebuild
> > > something when changing kernels like I should.  I haven't had trouble
> > > with at for many years of kernel changes, but 2.6.24 was the first
> > > with the new security stuff and maybe I need to have some
> > > capability-aware 'at' program?
> > >
> > > >                                          I'll just apologize as I think
> > it's my fault,
> > > > and ask you to please try the newest available kernel where I believe it
> > > > should be fixed.
> > >
> > > Do I need to recompile glibc and the at software to adjust so some
> > > kernel interface changes?  Did the 'make oldconfig' generate some bad
> > > config combination?  As root it works, so I don't think the at or atd
> > > are broken (but maybe they have to be patched for >2.6.23.X ?)
> > >
> > > bash-3.2$ su - root
> > > Password:
> > > BLS #at now
> > > warning: commands will be executed using /bin/sh
> > > at> echo "uh-huh..."
> > > at> <EOT>
> > > job 8 at Thu Feb 28 02:30:00 2008
> > >
> > > (and I checked and the job completes normally)
> > >
> > > > thanks,
> > > > -serge
> > >
> > > Thank you for reading.  Any ideas on what to try next?
> >
> > I'm working on setting up something I can test this on better, but just
> > for good measure can you try the following patch?  It should simply
> > prevent the extra signal checks from happening.
> >
> > thanks,
> > -serge
> >
> > From f48d28fe525652cb7321d5f545f9dcdfb3ce97d8 Mon Sep 17 00:00:00 2001
> > From: Serge Hallyn <serge@hallyn.com>
> > Date: Wed, 27 Feb 2008 20:53:47 +0000
> > Subject: [PATCH 1/1] file capabilities: get rid of cap_task_kill
> >
> > This is just a test to not use cap_task_kill.  We will see whether
> > this fixes the atd problem
> >
> > Signed-off-by: Serge Hallyn <serge@hallyn.com>
> > ---
> >  include/linux/security.h |    2 +-
> >  security/capability.c    |    1 -
> >  2 files changed, 1 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/linux/security.h b/include/linux/security.h
> > index fe52cde..4c43914 100644
> > --- a/include/linux/security.h
> > +++ b/include/linux/security.h
> > @@ -2138,7 +2138,7 @@ static inline int security_task_kill (struct
> > task_struct *p,
> >  				      struct siginfo *info, int sig,
> >  				      u32 secid)
> >  {
> > -	return cap_task_kill(p, info, sig, secid);
> > +	return 0;
> >  }
> >
> >  static inline int security_task_wait (struct task_struct *p)
> > diff --git a/security/capability.c b/security/capability.c
> > index 9e99f36..2c6e06d 100644
> > --- a/security/capability.c
> > +++ b/security/capability.c
> > @@ -40,7 +40,6 @@ static struct security_operations capability_ops = {
> >  	.inode_need_killpriv =		cap_inode_need_killpriv,
> >  	.inode_killpriv =		cap_inode_killpriv,
> >
> > -	.task_kill =			cap_task_kill,
> >  	.task_setscheduler =		cap_task_setscheduler,
> >  	.task_setioprio =		cap_task_setioprio,
> >  	.task_setnice =			cap_task_setnice,
> > --
> > 1.5.2.5
> >
> >
> >

^ permalink raw reply	[flat|nested] 10+ messages in thread

* Re: at program breaks with kernel 2.6.24
  2008-02-28 17:19         ` serge
@ 2008-02-28 17:51           ` BuraphaLinux Server
  0 siblings, 0 replies; 10+ messages in thread
From: BuraphaLinux Server @ 2008-02-28 17:51 UTC (permalink / raw)
  To: serge; +Cc: linux-kernel

Since you asked, for the record I am the maintainer of
http://www.buraphalinux.org/download/bls1.1/ which is a small-time
compiled-from-source distribution (except java and ant).  It is used
at the university where I teach, and for some government sites in
Bangkok.  My distribution uses vanilla kernels, vanilla gcc, vanilla
libc, etc.  I apply patches for path differences, CVEs, and for trying
to get old stuff to build with newer gcc, but otherwise I don't patch
things.  Of the known distributions, we are most similar to Slackware.
 I did try everything I knew before bothering the list with this.  I
am testing a beta of my next release that is the first with
capabilites enabled, and hit this problem with 'at' after updating a
test machine from 2.6.23.16 to the 2.6.24.2 kernel.

I will test the new version of the patch when I see it on the list and
report back what happens.

Thank you for your help.


On 2/29/08, serge@hallyn.com <serge@hallyn.com> wrote:
> Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > Thank you for the patch to try.  This patch works perfectly.  Is it
> > safe to apply this to 2.6.24.3?
>
> I took care not to touch commoncap.c so that it should hopefully apply
> cleanly to the past few kernels.
>
> > I hope it is in 2.6.24.4
>
> I'm getting ready to send out a more complete version of the patch.
>
> thanks,
> -serge
>
> > On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > > This is gmail which has broken line wrapping I cannot fix. Anyway, I
> > > > did build the new kernel but it still does not work for me. I tried to
> > > > strace, but that didn't work for me either. This is as a non-root user
> > > > (and same 'at'/'atd' binaries work on 2.6.23.X):
> > > >
> > > > bash-3.2$ at now
> > > > warning: commands will be executed using /bin/sh
> > > > at> echo "suid is busted"
> > > > at> <EOT>
> > > > job 4 at Thu Feb 28 02:16:00 2008
> > > > Can't signal atd (permission denied)
> > > > bash-3.2$ ls -ld $(which at)
> > > > -rws--x--x 1 daemon daemon 36468 Jan 11 15:37 /usr/bin/at
> > > > bash-3.2$ ps -ef | grep atd
> > > > daemon 2874 1 0 02:14 ? 00:00:00 /usr/sbin/atd -b 15 -l 1
> > > > bozo 3054 3049 0 02:16 pts/0 00:00:00 grep atd
> > > > bash-3.2$ ls -ld /var/spool/at*
> > > > drwxrwxrwt 2 daemon daemon 4096 Feb 28 02:16 /var/spool/atjobs
> > > > drwx------ 2 daemon daemon 4096 Feb 27 20:02 /var/spool/atspool
> > > > bash-3.2$ uname -a
> > > > Linux zappaman.cs.buu.ac.th 2.6.25-rc3 #1 SMP Thu Feb 28 01:29:46 ICT
> > > > 2008 i686 pentium4 i386 GNU/Linux
> > > > bash-3.2$ strace -s 99999 -v -o /tmp/pain at now
> > > > warning: commands will be executed using /bin/sh
> > > > Cannot open lockfile /var/spool/atjobs/.SEQ: Permission denied
> > > > bash-3.2$ at now
> > > > warning: commands will be executed using /bin/sh
> > > > at> echo "hi"
> > > > at> <EOT>
> > > > job 7 at Thu Feb 28 02:19:00 2008
> > > > Can't signal atd (permission denied)
> > > >
> > > > My kenrel .config is big, so it is attached so I don't get any cut and
> > > > paste error.
> > > >
> > > > On 2/28/08, serge@hallyn.com <serge@hallyn.com> wrote:
> > > > > Quoting BuraphaLinux Server (buraphalinuxserver@gmail.com):
> > > > > > http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=463669
> > > > > >
> > > > > > I have the same problem - it is not debian specific. Did the
> > > > > > semantics of kill() change with the new kernel? I thought as long
> as
> > > > > > something is setuid, even with capability stuff around the setuid
> > > > > > programs just get _all_ capabilities and would keep working.
> > > > > >
> > > > > > I did a good search and found many people with the problem, but no
> > > > > > solutions except going back to 2.6.23.x kernels. I guess you'll
> flame
> > > > > > me, but at least include a link to the solution too.
> > > > >
> > > > > Why would we flame you?
> > > >
> > > > Because maybe I'm doing something stupid and didn't patch/rebuild
> > > > something when changing kernels like I should.  I haven't had trouble
> > > > with at for many years of kernel changes, but 2.6.24 was the first
> > > > with the new security stuff and maybe I need to have some
> > > > capability-aware 'at' program?
> > > >
> > > > >                                          I'll just apologize as I
> think
> > > it's my fault,
> > > > > and ask you to please try the newest available kernel where I
> believe it
> > > > > should be fixed.
> > > >
> > > > Do I need to recompile glibc and the at software to adjust so some
> > > > kernel interface changes?  Did the 'make oldconfig' generate some bad
> > > > config combination?  As root it works, so I don't think the at or atd
> > > > are broken (but maybe they have to be patched for >2.6.23.X ?)
> > > >
> > > > bash-3.2$ su - root
> > > > Password:
> > > > BLS #at now
> > > > warning: commands will be executed using /bin/sh
> > > > at> echo "uh-huh..."
> > > > at> <EOT>
> > > > job 8 at Thu Feb 28 02:30:00 2008
> > > >
> > > > (and I checked and the job completes normally)
> > > >
> > > > > thanks,
> > > > > -serge
> > > >
> > > > Thank you for reading.  Any ideas on what to try next?
> > >
> > > I'm working on setting up something I can test this on better, but just
> > > for good measure can you try the following patch?  It should simply
> > > prevent the extra signal checks from happening.
> > >
> > > thanks,
> > > -serge
> > >
> > > From f48d28fe525652cb7321d5f545f9dcdfb3ce97d8 Mon Sep 17 00:00:00 2001
> > > From: Serge Hallyn <serge@hallyn.com>
> > > Date: Wed, 27 Feb 2008 20:53:47 +0000
> > > Subject: [PATCH 1/1] file capabilities: get rid of cap_task_kill
> > >
> > > This is just a test to not use cap_task_kill.  We will see whether
> > > this fixes the atd problem
> > >
> > > Signed-off-by: Serge Hallyn <serge@hallyn.com>
> > > ---
> > >  include/linux/security.h |    2 +-
> > >  security/capability.c    |    1 -
> > >  2 files changed, 1 insertions(+), 2 deletions(-)
> > >
> > > diff --git a/include/linux/security.h b/include/linux/security.h
> > > index fe52cde..4c43914 100644
> > > --- a/include/linux/security.h
> > > +++ b/include/linux/security.h
> > > @@ -2138,7 +2138,7 @@ static inline int security_task_kill (struct
> > > task_struct *p,
> > >  				      struct siginfo *info, int sig,
> > >  				      u32 secid)
> > >  {
> > > -	return cap_task_kill(p, info, sig, secid);
> > > +	return 0;
> > >  }
> > >
> > >  static inline int security_task_wait (struct task_struct *p)
> > > diff --git a/security/capability.c b/security/capability.c
> > > index 9e99f36..2c6e06d 100644
> > > --- a/security/capability.c
> > > +++ b/security/capability.c
> > > @@ -40,7 +40,6 @@ static struct security_operations capability_ops = {
> > >  	.inode_need_killpriv =		cap_inode_need_killpriv,
> > >  	.inode_killpriv =		cap_inode_killpriv,
> > >
> > > -	.task_kill =			cap_task_kill,
> > >  	.task_setscheduler =		cap_task_setscheduler,
> > >  	.task_setioprio =		cap_task_setioprio,
> > >  	.task_setnice =			cap_task_setnice,
> > > --
> > > 1.5.2.5
> > >
> > >
> > >
>

^ permalink raw reply	[flat|nested] 10+ messages in thread

end of thread, other threads:[~2008-02-28 17:51 UTC | newest]

Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-02-27 12:27 at program breaks with kernel 2.6.24 BuraphaLinux Server
2008-02-27 13:41 ` Jiri Kosina
2008-02-27 18:17 ` serge
2008-02-27 19:36   ` Frans Pop
2008-02-27 19:47   ` BuraphaLinux Server
2008-02-28  3:00     ` serge
2008-02-28  5:23       ` BuraphaLinux Server
2008-02-28 14:54         ` serge
2008-02-28 17:19         ` serge
2008-02-28 17:51           ` BuraphaLinux Server

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).