LKML Archive on lore.kernel.org help / color / mirror / Atom feed
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. [not found] ` <86802c440803030030p4ff9cec5tdb25d1cdc131d377@mail.gmail.com> @ 2008-03-03 10:01 ` Yinghai Lu 2008-03-03 10:10 ` Ingo Molnar 2008-03-03 10:11 ` Ingo Molnar 0 siblings, 2 replies; 10+ messages in thread From: Yinghai Lu @ 2008-03-03 10:01 UTC (permalink / raw) To: Ingo Molnar, Greg KH, Muli Ben-Yehuda Cc: Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 1796 bytes --] On Mon, Mar 3, 2008 at 12:30 AM, Yinghai Lu <yhlu.kernel@gmail.com> wrote: > that regression is caused by: > > commit 08f1c192c3c32797068bfe97738babb3295bbf42 > Author: Muli Ben-Yehuda <muli@il.ibm.com> > Date: Sun Jul 22 00:23:39 2007 +0300 > > x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata > > This patch introduces struct pci_sysdata to x86 and x86-64, and > converts the existing two users (NUMA, Calgary) to use it. > > This lays the groundwork for having other users of sysdata, such as > the PCI domains work. > > The Calgary bits are tested, the NUMA bits just look ok. > > Signed-off-by: Jeff Garzik <jeff@garzik.org> > Signed-off-by: Muli Ben-Yehuda <muli@il.ibm.com> > Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> > > that replace pcibios_scan_root by pci_scan_bus_parented... > - bus = pcibios_scan_root(busnum); > + sd->node = -1; > + > + pxm = acpi_get_pxm(device->handle); > +#ifdef CONFIG_ACPI_NUMA > + if (pxm >= 0) > > + sd->node = pxm_to_node(pxm); > +#endif > + > + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); > > and in pcibios_scan_root we have > > struct pci_bus *bus = NULL; > struct pci_sysdata *sd; > > dmi_check_system(pciprobe_dmi_table); > > while ((bus = pci_find_next_bus(bus)) != NULL) { > if (bus->number == busnum) { > /* Already scanned */ > return bus; > } > } > Ingo, Yakui's patch should be applied for 2.6.25, and 2.6.23 stable, and 2.6.24 stable. also please use attached patch to replace the one patch in x86.git# testing. old one can not be applied after Yakui's patch. YH [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: get_mp_bus_early_v2.patch --] [-- Type: text/x-patch; name=get_mp_bus_early_v2.patch, Size: 12386 bytes --] x86: get mp_bus_to_node early v2 current on amd k8 system with multi ht chain, the numa_node of pci devices under /sys/devices/pci0000:80/* always 0, even that chain is on node 1 or 2 or 3. workaround: pcibus_to_node(bus) is used when we want to get node that pci_device is on. In struct device, we already have numa_node member. and we could use dev_to_node() /set_dev_node() to get and set numa_node in the device. set_dev_node is called in pci_device_add() with pcibus_to_node(bus). and pcibus_to_node use bus->sysdata for nodeid. the problem is when pci_add_device is called, bus->sysdata is not assigned correct nodeid yet. the result will be numa_node always is 0. pcibios_scan_root and pci_scan_root could take sysdata. So we need to get mp_bus_to_node mapping before these two are called. and get_mp_bus_to_node could get correct node for sysdata in root bus. in scanning of root bus, all child bus will take parent bus sysdata. So all pci_device->dev.numa_node will be assigned correctly automatically. later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we could also could make other bus specific device get the correct numa_node too. this is one update version to pci_sysdata and jeff's pci_domain patch. and duplicated scan bus fix patch Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Index: linux-2.6/arch/x86/pci/Makefile_32 =================================================================== --- linux-2.6.orig/arch/x86/pci/Makefile_32 +++ linux-2.6/arch/x86/pci/Makefile_32 @@ -10,5 +10,6 @@ pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o +pci-$(CONFIG_NUMA) += mp_bus_to_node.o obj-y += $(pci-y) common.o early.o Index: linux-2.6/arch/x86/pci/common.c =================================================================== --- linux-2.6.orig/arch/x86/pci/common.c +++ linux-2.6/arch/x86/pci/common.c @@ -396,9 +396,14 @@ struct pci_bus * __devinit pcibios_scan_ return NULL; } + sd->node = get_mp_bus_to_node(busnum); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); - return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + return bus; } extern u8 pci_cache_line_size; @@ -541,7 +546,7 @@ void pcibios_disable_device (struct pci_ pcibios_disable_irq(dev); } -struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno) +struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) { struct pci_bus *bus = NULL; struct pci_sysdata *sd; @@ -556,10 +561,15 @@ struct pci_bus *__devinit pci_scan_bus_w printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); return NULL; } - sd->node = -1; - bus = pci_scan_bus(busno, &pci_root_ops, sd); + sd->node = node; + bus = pci_scan_bus(busno, ops, sd); if (!bus) kfree(sd); return bus; } + +struct pci_bus *pci_scan_bus_with_sysdata(int busno) +{ + return pci_scan_bus_on_node(busno, &pci_root_ops, -1); +} Index: linux-2.6/arch/x86/pci/irq.c =================================================================== --- linux-2.6.orig/arch/x86/pci/irq.c +++ linux-2.6/arch/x86/pci/irq.c @@ -136,9 +136,11 @@ static void __init pirq_peer_trick(void) busmap[e->bus] = 1; } for(i = 1; i < 256; i++) { + int node; if (!busmap[i] || pci_find_bus(0, i)) continue; - if (pci_scan_bus_with_sysdata(i)) + node = get_mp_bus_to_node(i); + if (pci_scan_bus_on_node(i, &pci_root_ops, node)) printk(KERN_INFO "PCI: Discovered primary peer " "bus %02x [IRQ]\n", i); } Index: linux-2.6/arch/x86/pci/k8-bus_64.c =================================================================== --- linux-2.6.orig/arch/x86/pci/k8-bus_64.c +++ linux-2.6/arch/x86/pci/k8-bus_64.c @@ -1,7 +1,9 @@ #include <linux/init.h> #include <linux/pci.h> +#include <asm/pci-direct.h> #include <asm/mpspec.h> #include <linux/cpumask.h> +#include <linux/topology.h> /* * This discovers the pcibus <-> node mapping on AMD K8. @@ -20,64 +22,96 @@ #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) #define PCI_DEVICE_ID_K8HTCONFIG 0x1100 +#define BUS_NR 256 + +static int mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node = -1; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return node; + + node = mp_bus_to_node[busnum]; + + /* + * let numa_node_id to decide it later in dma_alloc_pages + * if there is no ram on that node + */ + if (node != -1 && !node_online(node)) + node = -1; + + return node; +} + /** - * fill_mp_bus_to_cpumask() + * early_fill_mp_bus_to_node() + * called before pcibios_scan_root and pci_scan_bus * fills the mp_bus_to_cpumask array based according to the LDT Bus Number * Registers found in the K8 northbridge */ __init static int -fill_mp_bus_to_cpumask(void) +early_fill_mp_bus_to_node(void) { - struct pci_dev *nb_dev = NULL; int i, j; + unsigned slot; u32 ldtbus, nid; + u32 id; static int lbnr[3] = { LDT_BUS_NUMBER_REGISTER_0, LDT_BUS_NUMBER_REGISTER_1, LDT_BUS_NUMBER_REGISTER_2 }; - while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) { - pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid); + for (i = 0; i < BUS_NR; i++) + mp_bus_to_node[i] = -1; + + if (!early_pci_allowed()) + return -1; + + for (slot = 0x18; slot < 0x20; slot++) { + id = read_pci_config(0, slot, 0, PCI_VENDOR_ID); + if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_K8HTCONFIG<<16))) + break; + nid = read_pci_config(0, slot, 0, NODE_ID_REGISTER); for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { - pci_read_config_dword(nb_dev, lbnr[i], &ldtbus); + ldtbus = read_pci_config(0, slot, 0, lbnr[i]); /* * if there are no busses hanging off of the current * ldt link then both the secondary and subordinate * bus number fields are set to 0. - * + * * RED-PEN * This is slightly broken because it assumes - * HT node IDs == Linux node ids, which is not always + * HT node IDs == Linux node ids, which is not always * true. However it is probably mostly true. */ if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0 && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) { for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); - j++) { - struct pci_bus *bus; - struct pci_sysdata *sd; - - long node = NODE_ID(nid); - /* Algorithm a bit dumb, but - it shouldn't matter here */ - bus = pci_find_bus(0, j); - if (!bus) - continue; - if (!node_online(node)) - node = 0; - - sd = bus->sysdata; - sd->node = node; - } + j++) { + int node = NODE_ID(nid); + mp_bus_to_node[j] = (unsigned char)node; + } } } } + for (i = 0; i < BUS_NR; i++) { + int node = mp_bus_to_node[i]; + if (node >= 0) + printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node); + } return 0; } -fs_initcall(fill_mp_bus_to_cpumask); +postcore_initcall(early_fill_mp_bus_to_node); Index: linux-2.6/arch/x86/pci/legacy.c =================================================================== --- linux-2.6.orig/arch/x86/pci/legacy.c +++ linux-2.6/arch/x86/pci/legacy.c @@ -12,6 +12,7 @@ static void __devinit pcibios_fixup_peer_bridges(void) { int n, devfn; + long node; if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) return; @@ -21,12 +22,13 @@ static void __devinit pcibios_fixup_peer u32 l; if (pci_find_bus(0, n)) continue; + node = get_mp_bus_to_node(n); for (devfn = 0; devfn < 256; devfn += 8) { if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && l != 0x0000 && l != 0xffff) { DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); - pci_scan_bus_with_sysdata(n); + pci_scan_bus_on_node(n, &pci_root_ops, node); break; } } Index: linux-2.6/arch/x86/pci/mp_bus_to_node.c =================================================================== --- /dev/null +++ linux-2.6/arch/x86/pci/mp_bus_to_node.c @@ -0,0 +1,23 @@ +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/topology.h> + +#define BUS_NR 256 + +static unsigned char mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = (unsigned char) node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return 0; + node = mp_bus_to_node[busnum]; + return node; +} Index: linux-2.6/include/asm-x86/pci.h =================================================================== --- linux-2.6.orig/include/asm-x86/pci.h +++ linux-2.6/include/asm-x86/pci.h @@ -20,6 +20,8 @@ struct pci_sysdata { }; /* scan a bus after allocating a pci_sysdata for it */ +extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, + int node); extern struct pci_bus *pci_scan_bus_with_sysdata(int busno); static inline int pci_domain_nr(struct pci_bus *bus) Index: linux-2.6/include/asm-x86/topology.h =================================================================== --- linux-2.6.orig/include/asm-x86/topology.h +++ linux-2.6/include/asm-x86/topology.h @@ -165,8 +165,19 @@ extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) #endif +int get_mp_bus_to_node(int busnum); +void set_mp_bus_to_node(int busnum, int node); + #else /* CONFIG_NUMA */ +static inline int get_mp_bus_to_node(int busnum) +{ + return 0; +} +static inline void set_mp_bus_to_node(int busnum, int node) +{ +} + #include <asm-generic/topology.h> #endif Index: linux-2.6/arch/x86/pci/acpi.c =================================================================== --- linux-2.6.orig/arch/x86/pci/acpi.c +++ linux-2.6/arch/x86/pci/acpi.c @@ -191,7 +191,10 @@ struct pci_bus * __devinit pci_acpi_scan { struct pci_bus *bus; struct pci_sysdata *sd; + int node; +#ifdef CONFIG_ACPI_NUMA int pxm; +#endif dmi_check_system(acpi_pciprobe_dmi_table); @@ -201,54 +204,52 @@ struct pci_bus * __devinit pci_acpi_scan return NULL; } - /* Allocate per-root-bus (not per bus) arch-specific data. - * TODO: leak; this memory is never freed. - * It's arguable whether it's worth the trouble to care. - */ - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) { - printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); - return NULL; - } - - sd->domain = domain; - sd->node = -1; - - pxm = acpi_get_pxm(device->handle); + node = -1; #ifdef CONFIG_ACPI_NUMA + pxm = acpi_get_pxm(device->handle); if (pxm >= 0) - sd->node = pxm_to_node(pxm); + node = pxm_to_node(pxm); + if (node != -1) + set_mp_bus_to_node(busnum, node); + else + node = get_mp_bus_to_node(busnum); #endif - /* - * Maybe the desired pci bus has been already scanned. In such case - * it is unnecessary to scan the pci bus with the given domain,busnum. - */ + bus = pci_find_bus(domain, busnum); if (bus) { - /* - * If the desired bus exits, the content of bus->sysdata will - * be replaced by sd. + /* already scanned ?*/ + bus->sysdata->node = node; + } else { + /* Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. */ - memcpy(bus->sysdata, sd, sizeof(*sd)); - kfree(sd); - } else - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", + busnum); + return NULL; + } - if (!bus) - kfree(sd); + sd->domain = domain; + sd->node = node; + + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); + } #ifdef CONFIG_ACPI_NUMA - if (bus != NULL) { + if (bus) { if (pxm >= 0) { - printk("bus %d -> pxm %d -> node %d\n", - busnum, pxm, pxm_to_node(pxm)); + printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", + busnum, pxm, node); } } #endif if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, bus); - return bus; } ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 10:01 ` [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned Yinghai Lu @ 2008-03-03 10:10 ` Ingo Molnar 2008-03-03 10:33 ` Yinghai Lu 2008-03-03 10:11 ` Ingo Molnar 1 sibling, 1 reply; 10+ messages in thread From: Ingo Molnar @ 2008-03-03 10:10 UTC (permalink / raw) To: Yinghai Lu Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List * Yinghai Lu <yhlu.kernel@gmail.com> wrote: > also please use attached patch to replace the one patch in x86.git# > testing. old one can not be applied after Yakui's patch. ok, thanks. Note, i still have the patch below filed up against it - is that still needed? Ingo --------------> Subject: x86: fix k8-bus_64.c build From: Ingo Molnar <mingo@elte.hu> Date: Wed Feb 20 10:30:15 CET 2008 Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/pci/k8-bus_64.c | 6 ++++++ include/asm-x86/topology.h | 4 ++-- 2 files changed, 8 insertions(+), 2 deletions(-) Index: linux-x86.q/arch/x86/pci/k8-bus_64.c =================================================================== --- linux-x86.q.orig/arch/x86/pci/k8-bus_64.c +++ linux-x86.q/arch/x86/pci/k8-bus_64.c @@ -22,6 +22,8 @@ #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) #define PCI_DEVICE_ID_K8HTCONFIG 0x1100 +#ifdef CONFIG_NUMA + #define BUS_NR 256 static int mp_bus_to_node[BUS_NR]; @@ -51,6 +53,8 @@ int get_mp_bus_to_node(int busnum) return node; } +#endif + /** * early_fill_mp_bus_to_node() * called before pcibios_scan_root and pci_scan_bus @@ -60,6 +64,7 @@ int get_mp_bus_to_node(int busnum) __init static int early_fill_mp_bus_to_node(void) { +#ifdef CONFIG_NUMA int i, j; unsigned slot; u32 ldtbus, nid; @@ -111,6 +116,7 @@ early_fill_mp_bus_to_node(void) if (node >= 0) printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node); } +#endif return 0; } Index: linux-x86.q/include/asm-x86/topology.h =================================================================== --- linux-x86.q.orig/include/asm-x86/topology.h +++ linux-x86.q/include/asm-x86/topology.h @@ -165,8 +165,8 @@ extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) #endif -int get_mp_bus_to_node(int busnum); -void set_mp_bus_to_node(int busnum, int node); +extern int get_mp_bus_to_node(int busnum); +extern void set_mp_bus_to_node(int busnum, int node); #else /* CONFIG_NUMA */ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 10:10 ` Ingo Molnar @ 2008-03-03 10:33 ` Yinghai Lu 2008-03-03 11:11 ` Ingo Molnar 0 siblings, 1 reply; 10+ messages in thread From: Yinghai Lu @ 2008-03-03 10:33 UTC (permalink / raw) To: Ingo Molnar Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List On Mon, Mar 3, 2008 at 2:10 AM, Ingo Molnar <mingo@elte.hu> wrote: > > * Yinghai Lu <yhlu.kernel@gmail.com> wrote: > > > > also please use attached patch to replace the one patch in x86.git# > > testing. old one can not be applied after Yakui's patch. > > ok, thanks. Note, i still have the patch below filed up against it - is > that still needed? > > Ingo > > --------------> > Subject: x86: fix k8-bus_64.c build > From: Ingo Molnar <mingo@elte.hu> > Date: Wed Feb 20 10:30:15 CET 2008 > yes. still needed, or you can fold that to next one about multi pci root. YH ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 10:33 ` Yinghai Lu @ 2008-03-03 11:11 ` Ingo Molnar 2008-03-03 18:57 ` Yinghai Lu 0 siblings, 1 reply; 10+ messages in thread From: Ingo Molnar @ 2008-03-03 11:11 UTC (permalink / raw) To: Yinghai Lu Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 281 bytes --] well, the patch doesnt build with the attached .config: arch/x86/pci/acpi.c: In function 'pci_acpi_scan_root': arch/x86/pci/acpi.c:224: warning: dereferencing 'void *' pointer arch/x86/pci/acpi.c:224: error: request for member 'node' in something not a structure or union Ingo [-- Attachment #2: config --] [-- Type: text/plain, Size: 48717 bytes --] # # Automatically generated make config: don't edit # Linux kernel version: 2.6.25-rc3 # Mon Mar 3 12:01:35 2008 # # CONFIG_64BIT is not set CONFIG_X86_32=y # CONFIG_X86_64 is not set CONFIG_X86=y # CONFIG_GENERIC_LOCKBREAK is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y CONFIG_SEMAPHORE_SLEEPERS=y CONFIG_FAST_CMPXCHG_LOCAL=y CONFIG_MMU=y CONFIG_ZONE_DMA=y CONFIG_QUICKLIST=y CONFIG_GENERIC_ISA_DMA=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_HWEIGHT=y # CONFIG_GENERIC_GPIO is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_DMI=y # CONFIG_RWSEM_GENERIC_SPINLOCK is not set CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y CONFIG_GENERIC_CALIBRATE_DELAY=y # CONFIG_GENERIC_TIME_VSYSCALL is not set CONFIG_ARCH_HAS_CPU_RELAX=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_ZONE_DMA32 is not set CONFIG_ARCH_POPULATES_NODE_MAP=y # CONFIG_AUDIT_ARCH is not set CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_X86_BIOS_REBOOT=y CONFIG_KTIME_SCALAR=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # # General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y # CONFIG_SYSVIPC is not set CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set CONFIG_AUDIT=y CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=20 # CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_RT_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y # CONFIG_RELAY is not set CONFIG_NAMESPACES=y CONFIG_UTS_NS=y # CONFIG_USER_NS is not set # CONFIG_PID_NS is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set # CONFIG_TIMERFD is not set CONFIG_EVENTFD=y CONFIG_SHMEM=y # CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y # CONFIG_IOSCHED_AS is not set # CONFIG_IOSCHED_DEADLINE is not set CONFIG_IOSCHED_CFQ=y # CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_CLASSIC_RCU=y # CONFIG_PREEMPT_RCU is not set # # Processor type and features # # CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_SMP is not set # CONFIG_X86_PC is not set # CONFIG_X86_ELAN is not set # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set CONFIG_X86_GENERICARCH=y # CONFIG_X86_ES7000 is not set # CONFIG_X86_RDC321X is not set # CONFIG_X86_VSMP is not set # CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER is not set CONFIG_PARAVIRT_GUEST=y # CONFIG_VMI is not set # CONFIG_LGUEST_GUEST is not set CONFIG_PARAVIRT=y CONFIG_X86_CYCLONE_TIMER=y # CONFIG_M386 is not set CONFIG_M486=y # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set # CONFIG_MPENTIUMIII is not set # CONFIG_MPENTIUMM is not set # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MCRUSOE is not set # CONFIG_MEFFICEON is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MGEODEGX1 is not set # CONFIG_MGEODE_LX is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set # CONFIG_GENERIC_CPU is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_L1_CACHE_SHIFT=4 CONFIG_X86_XADD=y CONFIG_X86_PPRO_FENCE=y CONFIG_X86_F00F_BUG=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_ALIGNMENT_16=y CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_HPET_TIMER=y # CONFIG_IOMMU_HELPER is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set # CONFIG_RCU_TRACE is not set CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_MCE=y # CONFIG_X86_MCE_NONFATAL is not set # CONFIG_VM86 is not set CONFIG_TOSHIBA=y # CONFIG_I8K is not set # CONFIG_X86_REBOOTFIXUPS is not set CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y # CONFIG_X86_MSR is not set CONFIG_X86_CPUID=y # CONFIG_NOHIGHMEM is not set CONFIG_HIGHMEM4G=y # CONFIG_HIGHMEM64G is not set # CONFIG_VMSPLIT_3G is not set # CONFIG_VMSPLIT_3G_OPT is not set # CONFIG_VMSPLIT_2G is not set # CONFIG_VMSPLIT_2G_OPT is not set CONFIG_VMSPLIT_1G=y CONFIG_PAGE_OFFSET=0x40000000 CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_NR_QUICK=1 CONFIG_VIRT_TO_BUS=y CONFIG_HIGHPTE=y CONFIG_MATH_EMULATION=y # CONFIG_MTRR is not set # CONFIG_EFI is not set # CONFIG_SECCOMP is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set CONFIG_PHYSICAL_START=0x100000 CONFIG_RELOCATABLE=y CONFIG_PHYSICAL_ALIGN=0x100000 # CONFIG_COMPAT_VDSO is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y # # Power management options # CONFIG_PM=y # CONFIG_PM_LEGACY is not set CONFIG_PM_DEBUG=y CONFIG_PM_VERBOSE=y CONFIG_CAN_PM_TRACE=y CONFIG_PM_TRACE=y CONFIG_PM_TRACE_RTC=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y # CONFIG_HIBERNATION is not set CONFIG_ACPI=y CONFIG_ACPI_SLEEP=y # CONFIG_ACPI_PROCFS is not set CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_SYSFS_POWER=y CONFIG_ACPI_PROC_EVENT=y # CONFIG_ACPI_AC is not set # CONFIG_ACPI_BATTERY is not set # CONFIG_ACPI_BUTTON is not set CONFIG_ACPI_VIDEO=y CONFIG_ACPI_FAN=y # CONFIG_ACPI_DOCK is not set CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_WMI is not set # CONFIG_ACPI_ASUS is not set CONFIG_ACPI_TOSHIBA=y CONFIG_ACPI_CUSTOM_DSDT_INITRD=y CONFIG_ACPI_BLACKLIST_YEAR=0 # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_SYSTEM=y # CONFIG_X86_PM_TIMER is not set CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_SBS=y CONFIG_X86_APM_BOOT=y CONFIG_APM=y # CONFIG_APM_IGNORE_USER_SUSPEND is not set CONFIG_APM_DO_ENABLE=y CONFIG_APM_CPU_IDLE=y # CONFIG_APM_DISPLAY_BLANK is not set CONFIG_APM_ALLOW_INTS=y CONFIG_APM_REAL_MODE_POWER_OFF=y # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y # # Bus options (PCI etc.) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GOMMCONFIG is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_DOMAINS=y CONFIG_PCIEPORTBUS=y # CONFIG_PCIEAER is not set CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y CONFIG_PCI_LEGACY=y CONFIG_HT_IRQ=y CONFIG_ISA_DMA_API=y CONFIG_ISA=y # CONFIG_EISA is not set CONFIG_MCA=y # CONFIG_MCA_LEGACY is not set CONFIG_SCx200=y # CONFIG_SCx200HR_TIMER is not set CONFIG_K8_NB=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # # Executable file formats / Emulations # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Networking # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y CONFIG_XFRM_USER=y CONFIG_XFRM_SUB_POLICY=y CONFIG_XFRM_MIGRATE=y CONFIG_XFRM_STATISTICS=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set CONFIG_NET_IPGRE=y # CONFIG_NET_IPGRE_BROADCAST is not set CONFIG_IP_MROUTE=y # CONFIG_IP_PIMSM_V1 is not set CONFIG_IP_PIMSM_V2=y # CONFIG_ARPD is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set CONFIG_INET_IPCOMP=y CONFIG_INET_XFRM_TUNNEL=y CONFIG_INET_TUNNEL=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set CONFIG_INET_XFRM_MODE_BEET=y # CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y CONFIG_IP_VS=y CONFIG_IP_VS_DEBUG=y CONFIG_IP_VS_TAB_BITS=12 # # IPVS transport protocol load balancing support # # CONFIG_IP_VS_PROTO_TCP is not set # CONFIG_IP_VS_PROTO_UDP is not set # CONFIG_IP_VS_PROTO_ESP is not set CONFIG_IP_VS_PROTO_AH=y # # IPVS scheduler # CONFIG_IP_VS_RR=y CONFIG_IP_VS_WRR=y # CONFIG_IP_VS_LC is not set CONFIG_IP_VS_WLC=y CONFIG_IP_VS_LBLC=y CONFIG_IP_VS_LBLCR=y CONFIG_IP_VS_DH=y CONFIG_IP_VS_SH=y CONFIG_IP_VS_SED=y CONFIG_IP_VS_NQ=y # # IPVS application helper # # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set # CONFIG_NETLABEL is not set CONFIG_NETWORK_SECMARK=y CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # # Core Netfilter Configuration # CONFIG_NETFILTER_NETLINK=y # CONFIG_NETFILTER_NETLINK_QUEUE is not set CONFIG_NETFILTER_NETLINK_LOG=y # CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=y CONFIG_NETFILTER_XT_TARGET_CLASSIFY=y CONFIG_NETFILTER_XT_TARGET_MARK=y CONFIG_NETFILTER_XT_TARGET_NFQUEUE=y CONFIG_NETFILTER_XT_TARGET_NFLOG=y CONFIG_NETFILTER_XT_TARGET_RATEEST=y CONFIG_NETFILTER_XT_TARGET_SECMARK=y # CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set # CONFIG_NETFILTER_XT_MATCH_COMMENT is not set CONFIG_NETFILTER_XT_MATCH_DCCP=y # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=y # CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=y CONFIG_NETFILTER_XT_MATCH_LIMIT=y CONFIG_NETFILTER_XT_MATCH_MAC=y CONFIG_NETFILTER_XT_MATCH_MARK=y # CONFIG_NETFILTER_XT_MATCH_OWNER is not set CONFIG_NETFILTER_XT_MATCH_POLICY=y # CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set CONFIG_NETFILTER_XT_MATCH_PHYSDEV=y CONFIG_NETFILTER_XT_MATCH_PKTTYPE=y CONFIG_NETFILTER_XT_MATCH_QUOTA=y CONFIG_NETFILTER_XT_MATCH_RATEEST=y # CONFIG_NETFILTER_XT_MATCH_REALM is not set CONFIG_NETFILTER_XT_MATCH_SCTP=y # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=y CONFIG_NETFILTER_XT_MATCH_TCPMSS=y CONFIG_NETFILTER_XT_MATCH_TIME=y CONFIG_NETFILTER_XT_MATCH_U32=y # CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_QUEUE=y # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set # # DECnet: Netfilter Configuration # CONFIG_DECNET_NF_GRABULATOR=y # # Bridge: Netfilter Configuration # CONFIG_BRIDGE_NF_EBTABLES=y # CONFIG_BRIDGE_EBT_BROUTE is not set CONFIG_BRIDGE_EBT_T_FILTER=y CONFIG_BRIDGE_EBT_T_NAT=y # CONFIG_BRIDGE_EBT_802_3 is not set # CONFIG_BRIDGE_EBT_AMONG is not set # CONFIG_BRIDGE_EBT_ARP is not set # CONFIG_BRIDGE_EBT_IP is not set CONFIG_BRIDGE_EBT_LIMIT=y CONFIG_BRIDGE_EBT_MARK=y # CONFIG_BRIDGE_EBT_PKTTYPE is not set CONFIG_BRIDGE_EBT_STP=y CONFIG_BRIDGE_EBT_VLAN=y CONFIG_BRIDGE_EBT_ARPREPLY=y CONFIG_BRIDGE_EBT_DNAT=y # CONFIG_BRIDGE_EBT_MARK_T is not set # CONFIG_BRIDGE_EBT_REDIRECT is not set CONFIG_BRIDGE_EBT_SNAT=y # CONFIG_BRIDGE_EBT_LOG is not set # CONFIG_BRIDGE_EBT_ULOG is not set # CONFIG_IP_DCCP is not set CONFIG_IP_SCTP=y CONFIG_SCTP_DBG_MSG=y CONFIG_SCTP_DBG_OBJCNT=y # CONFIG_SCTP_HMAC_NONE is not set # CONFIG_SCTP_HMAC_SHA1 is not set CONFIG_SCTP_HMAC_MD5=y CONFIG_TIPC=y # CONFIG_TIPC_ADVANCED is not set # CONFIG_TIPC_DEBUG is not set CONFIG_ATM=y # CONFIG_ATM_CLIP is not set CONFIG_ATM_LANE=y # CONFIG_ATM_MPOA is not set CONFIG_ATM_BR2684=y CONFIG_ATM_BR2684_IPFILTER=y CONFIG_BRIDGE=y # CONFIG_VLAN_8021Q is not set CONFIG_DECNET=y CONFIG_DECNET_ROUTER=y CONFIG_LLC=y CONFIG_LLC2=y # CONFIG_IPX is not set CONFIG_ATALK=y CONFIG_DEV_APPLETALK=y CONFIG_LTPC=y # CONFIG_COPS is not set # CONFIG_IPDDP is not set # CONFIG_X25 is not set CONFIG_LAPB=y CONFIG_ECONET=y # CONFIG_ECONET_AUNUDP is not set CONFIG_ECONET_NATIVE=y # CONFIG_WAN_ROUTER is not set CONFIG_NET_SCHED=y # # Queueing/Scheduling # # CONFIG_NET_SCH_CBQ is not set CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_ATM=y CONFIG_NET_SCH_PRIO=y CONFIG_NET_SCH_RR=y CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y # CONFIG_NET_SCH_TEQL is not set # CONFIG_NET_SCH_TBF is not set CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y # CONFIG_NET_SCH_NETEM is not set # # Classification # CONFIG_NET_CLS=y # CONFIG_NET_CLS_BASIC is not set # CONFIG_NET_CLS_TCINDEX is not set CONFIG_NET_CLS_ROUTE4=y CONFIG_NET_CLS_ROUTE=y CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_U32 is not set CONFIG_NET_CLS_RSVP=y # CONFIG_NET_CLS_RSVP6 is not set # CONFIG_NET_CLS_FLOW is not set # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y # # Network testing # CONFIG_NET_PKTGEN=y # CONFIG_HAMRADIO is not set CONFIG_CAN=y CONFIG_CAN_RAW=y # CONFIG_CAN_BCM is not set # # CAN Device Drivers # # CONFIG_CAN_VCAN is not set CONFIG_CAN_DEBUG_DEVICES=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set CONFIG_FIB_RULES=y # # Wireless # CONFIG_CFG80211=y CONFIG_NL80211=y CONFIG_WIRELESS_EXT=y CONFIG_MAC80211=y # # Rate control algorithm selection # # CONFIG_MAC80211_RC_DEFAULT_PID is not set # CONFIG_MAC80211_RC_DEFAULT_SIMPLE is not set CONFIG_MAC80211_RC_DEFAULT_NONE=y # # Selecting 'y' for an algorithm will # # # build the algorithm into mac80211. # CONFIG_MAC80211_RC_DEFAULT="" # CONFIG_MAC80211_RC_PID is not set CONFIG_MAC80211_RC_SIMPLE=y # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUGFS is not set # CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set CONFIG_MAC80211_DEBUG=y CONFIG_MAC80211_HT_DEBUG=y # CONFIG_MAC80211_VERBOSE_DEBUG is not set CONFIG_MAC80211_LOWTX_FRAME_DUMP=y CONFIG_TKIP_DEBUG=y # CONFIG_MAC80211_DEBUG_COUNTERS is not set # CONFIG_MAC80211_IBSS_DEBUG is not set CONFIG_MAC80211_VERBOSE_PS_DEBUG=y CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set # CONFIG_IEEE80211_CRYPT_WEP is not set # CONFIG_IEEE80211_CRYPT_CCMP is not set CONFIG_IEEE80211_CRYPT_TKIP=y # CONFIG_IEEE80211_SOFTMAC is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set # # Device Drivers # # # Generic Driver Options # CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set CONFIG_CONNECTOR=y # CONFIG_PROC_EVENTS is not set # CONFIG_MTD is not set CONFIG_PARPORT=y # CONFIG_PARPORT_PC is not set # CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=y # CONFIG_PARPORT_1284 is not set CONFIG_PARPORT_NOT_PC=y CONFIG_PNP=y # CONFIG_PNP_DEBUG is not set # # Protocols # CONFIG_ISAPNP=y # CONFIG_PNPBIOS is not set CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_FD=y # CONFIG_BLK_DEV_XD is not set CONFIG_BLK_CPQ_DA=y CONFIG_BLK_CPQ_CISS_DA=y # CONFIG_CISS_SCSI_TAPE is not set # CONFIG_BLK_DEV_DAC960 is not set CONFIG_BLK_DEV_UMEM=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_SX8=y # CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=y CONFIG_VIRTIO_BLK=y CONFIG_MISC_DEVICES=y # CONFIG_IBM_ASM is not set # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=y CONFIG_TIFM_CORE=y CONFIG_TIFM_7XX1=y # CONFIG_ACER_WMI is not set CONFIG_ASUS_LAPTOP=y # CONFIG_FUJITSU_LAPTOP is not set # CONFIG_TC1100_WMI is not set CONFIG_MSI_LAPTOP=y CONFIG_SONY_LAPTOP=y # CONFIG_SONYPI_COMPAT is not set CONFIG_THINKPAD_ACPI=y # CONFIG_THINKPAD_ACPI_DEBUG is not set # CONFIG_THINKPAD_ACPI_DOCK is not set CONFIG_THINKPAD_ACPI_BAY=y CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y CONFIG_INTEL_MENLOW=y CONFIG_ENCLOSURE_SERVICES=y CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_TGT=y CONFIG_SCSI_NETLINK=y # CONFIG_SCSI_PROC_FS is not set # # SCSI support type (disk, tape, CD-ROM) # CONFIG_BLK_DEV_SD=y # CONFIG_CHR_DEV_ST is not set # CONFIG_CHR_DEV_OSST is not set # CONFIG_BLK_DEV_SR is not set # CONFIG_CHR_DEV_SG is not set CONFIG_CHR_DEV_SCH=y CONFIG_SCSI_ENCLOSURE=y # # Some SCSI devices (e.g. CD jukebox) support multiple LUNs # CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_CONSTANTS is not set CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y # # SCSI Transports # CONFIG_SCSI_SPI_ATTRS=y CONFIG_SCSI_FC_ATTRS=y # CONFIG_SCSI_FC_TGT_ATTRS is not set CONFIG_SCSI_ISCSI_ATTRS=y CONFIG_SCSI_SAS_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set CONFIG_SCSI_3W_9XXX=y # CONFIG_SCSI_7000FASST is not set CONFIG_SCSI_ACARD=y # CONFIG_SCSI_AHA152X is not set CONFIG_SCSI_AHA1542=y # CONFIG_SCSI_AACRAID is not set CONFIG_SCSI_AIC7XXX=y CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 CONFIG_AIC7XXX_RESET_DELAY_MS=5000 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set CONFIG_AIC7XXX_DEBUG_MASK=0 # CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set # CONFIG_SCSI_AIC7XXX_OLD is not set CONFIG_SCSI_AIC79XX=y CONFIG_AIC79XX_CMDS_PER_DEVICE=32 CONFIG_AIC79XX_RESET_DELAY_MS=5000 # CONFIG_AIC79XX_DEBUG_ENABLE is not set CONFIG_AIC79XX_DEBUG_MASK=0 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set CONFIG_SCSI_AIC94XX=y CONFIG_AIC94XX_DEBUG=y # CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ADVANSYS is not set CONFIG_SCSI_IN2000=y # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set CONFIG_MEGARAID_LEGACY=y CONFIG_MEGARAID_SAS=y # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_DTC3280 is not set # CONFIG_SCSI_EATA is not set CONFIG_SCSI_FUTURE_DOMAIN=y CONFIG_SCSI_GDTH=y CONFIG_SCSI_GENERIC_NCR5380=y # CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set # CONFIG_SCSI_GENERIC_NCR53C400 is not set CONFIG_SCSI_IBMMCA=y # CONFIG_IBMMCA_SCSI_ORDER_STANDARD is not set # CONFIG_IBMMCA_SCSI_DEV_RESET is not set CONFIG_SCSI_IPS=y CONFIG_SCSI_INITIO=y # CONFIG_SCSI_INIA100 is not set CONFIG_SCSI_MVSAS=y CONFIG_SCSI_NCR53C406A=y # CONFIG_SCSI_NCR_D700 is not set CONFIG_SCSI_STEX=y CONFIG_SCSI_SYM53C8XX_2=y CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 CONFIG_SCSI_SYM53C8XX_MMIO=y # CONFIG_SCSI_IPR is not set # CONFIG_SCSI_NCR_Q720 is not set # CONFIG_SCSI_PAS16 is not set CONFIG_SCSI_QLOGIC_FAS=y CONFIG_SCSI_QLOGIC_1280=y CONFIG_SCSI_QLA_FC=y CONFIG_SCSI_QLA_ISCSI=y CONFIG_SCSI_LPFC=y CONFIG_SCSI_SIM710=y CONFIG_SCSI_SYM53C416=y CONFIG_SCSI_DC395x=y CONFIG_SCSI_DC390T=y CONFIG_SCSI_T128=y # CONFIG_SCSI_U14_34F is not set CONFIG_SCSI_ULTRASTOR=y CONFIG_SCSI_NSP32=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_ATA_ACPI=y CONFIG_SATA_AHCI=y CONFIG_SATA_SVW=y CONFIG_ATA_PIIX=y # CONFIG_SATA_MV is not set CONFIG_SATA_NV=y # CONFIG_PDC_ADMA is not set # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set CONFIG_SATA_SX4=y # CONFIG_SATA_SIL is not set CONFIG_SATA_SIL24=y CONFIG_SATA_SIS=y # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set CONFIG_SATA_INIC162X=y # CONFIG_PATA_ACPI is not set # CONFIG_PATA_ALI is not set CONFIG_PATA_AMD=y # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD640_PCI is not set # CONFIG_PATA_CMD64X is not set CONFIG_PATA_CS5520=y # CONFIG_PATA_CS5530 is not set CONFIG_PATA_CS5535=y CONFIG_PATA_CS5536=y # CONFIG_PATA_CYPRESS is not set CONFIG_PATA_EFAR=y CONFIG_ATA_GENERIC=y # CONFIG_PATA_HPT366 is not set # CONFIG_PATA_HPT37X is not set CONFIG_PATA_HPT3X2N=y # CONFIG_PATA_HPT3X3 is not set # CONFIG_PATA_ISAPNP is not set # CONFIG_PATA_IT821X is not set CONFIG_PATA_IT8213=y # CONFIG_PATA_JMICRON is not set CONFIG_PATA_LEGACY=y CONFIG_PATA_TRIFLEX=y CONFIG_PATA_MARVELL=y CONFIG_PATA_MPIIX=y CONFIG_PATA_OLDPIIX=y CONFIG_PATA_NETCELL=y # CONFIG_PATA_NINJA32 is not set CONFIG_PATA_NS87410=y # CONFIG_PATA_NS87415 is not set CONFIG_PATA_OPTI=y # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set CONFIG_PATA_QDI=y # CONFIG_PATA_RADISYS is not set # CONFIG_PATA_RZ1000 is not set # CONFIG_PATA_SC1200 is not set CONFIG_PATA_SERVERWORKS=y CONFIG_PATA_PDC2027X=y CONFIG_PATA_SIL680=y CONFIG_PATA_SIS=y CONFIG_PATA_VIA=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_WINBOND_VLB=y CONFIG_PATA_PLATFORM=y CONFIG_MD=y # CONFIG_BLK_DEV_MD is not set # CONFIG_BLK_DEV_DM is not set # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # CONFIG_FIREWIRE=y # CONFIG_FIREWIRE_OHCI is not set # CONFIG_FIREWIRE_SBP2 is not set # CONFIG_IEEE1394 is not set CONFIG_I2O=y CONFIG_I2O_LCT_NOTIFY_ON_CHANGES=y # CONFIG_I2O_EXT_ADAPTEC is not set # CONFIG_I2O_CONFIG is not set CONFIG_I2O_BUS=y CONFIG_I2O_BLOCK=y CONFIG_I2O_SCSI=y CONFIG_I2O_PROC=y # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set CONFIG_EQUALIZER=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_NET_SB1000 is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=y # # MII PHY device drivers # # CONFIG_MARVELL_PHY is not set CONFIG_DAVICOM_PHY=y # CONFIG_QSEMI_PHY is not set CONFIG_LXT_PHY=y # CONFIG_CICADA_PHY is not set # CONFIG_VITESSE_PHY is not set CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set CONFIG_NET_VENDOR_3COM=y CONFIG_EL1=y CONFIG_EL2=y CONFIG_ELPLUS=y # CONFIG_EL16 is not set # CONFIG_EL3 is not set # CONFIG_3C515 is not set # CONFIG_VORTEX is not set # CONFIG_TYPHOON is not set CONFIG_LANCE=y # CONFIG_NET_VENDOR_SMC is not set CONFIG_NET_VENDOR_RACAL=y CONFIG_NI5010=y CONFIG_NI52=y # CONFIG_NI65 is not set # CONFIG_NET_TULIP is not set CONFIG_AT1700=y # CONFIG_DEPCA is not set CONFIG_HP100=y CONFIG_NET_ISA=y # CONFIG_E2100 is not set # CONFIG_EWRK3 is not set # CONFIG_EEXPRESS is not set CONFIG_EEXPRESS_PRO=y CONFIG_HPLAN_PLUS=y CONFIG_HPLAN=y CONFIG_LP486E=y CONFIG_ETH16I=y CONFIG_NE2000=y CONFIG_ZNET=y CONFIG_SEEQ8005=y CONFIG_IBMLANA=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y CONFIG_PCNET32=y CONFIG_PCNET32_NAPI=y # CONFIG_AMD8111_ETH is not set CONFIG_ADAPTEC_STARFIRE=y # CONFIG_ADAPTEC_STARFIRE_NAPI is not set # CONFIG_AC3200 is not set CONFIG_APRICOT=y # CONFIG_B44 is not set CONFIG_FORCEDETH=y CONFIG_FORCEDETH_NAPI=y # CONFIG_CS89x0 is not set CONFIG_EEPRO100=y CONFIG_E100=y CONFIG_FEALNX=y CONFIG_NATSEMI=y CONFIG_NE2K_PCI=y CONFIG_8139CP=y CONFIG_8139TOO=y # CONFIG_8139TOO_PIO is not set # CONFIG_8139TOO_TUNE_TWISTER is not set CONFIG_8139TOO_8129=y CONFIG_8139_OLD_RX_RESET=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set CONFIG_EPIC100=y CONFIG_SUNDANCE=y CONFIG_SUNDANCE_MMIO=y CONFIG_TLAN=y CONFIG_VIA_RHINE=y CONFIG_VIA_RHINE_MMIO=y # CONFIG_VIA_RHINE_NAPI is not set # CONFIG_SC92031 is not set # CONFIG_NET_POCKET is not set CONFIG_NETDEV_1000=y CONFIG_ACENIC=y # CONFIG_ACENIC_OMIT_TIGON_I is not set # CONFIG_DL2K is not set CONFIG_E1000=y # CONFIG_E1000_NAPI is not set CONFIG_E1000_DISABLE_PACKET_SPLIT=y # CONFIG_E1000E is not set # CONFIG_E1000E_ENABLED is not set CONFIG_IP1000=y CONFIG_IGB=y # CONFIG_NS83820 is not set CONFIG_HAMACHI=y CONFIG_YELLOWFIN=y # CONFIG_R8169 is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set CONFIG_SK98LIN=y # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y CONFIG_BNX2=y CONFIG_QLA3XXX=y CONFIG_ATL1=y # CONFIG_NETDEV_10000 is not set CONFIG_TR=y CONFIG_IBMTR=y CONFIG_IBMOL=y CONFIG_IBMLS=y # CONFIG_3C359 is not set CONFIG_TMS380TR=y CONFIG_TMSPCI=y CONFIG_SKISA=y # CONFIG_PROTEON is not set # CONFIG_ABYSS is not set # CONFIG_MADGEMC is not set CONFIG_SMCTR=y # # Wireless LAN # CONFIG_WLAN_PRE80211=y # CONFIG_STRIP is not set CONFIG_ARLAN=y CONFIG_WAVELAN=y # CONFIG_WLAN_80211 is not set # # USB Network Adapters # CONFIG_USB_CATC=y CONFIG_USB_KAWETH=y CONFIG_USB_PEGASUS=y CONFIG_USB_RTL8150=y CONFIG_USB_USBNET=y # CONFIG_USB_NET_AX8817X is not set # CONFIG_USB_NET_CDCETHER is not set # CONFIG_USB_NET_DM9601 is not set # CONFIG_USB_NET_GL620A is not set # CONFIG_USB_NET_NET1080 is not set CONFIG_USB_NET_PLUSB=y CONFIG_USB_NET_MCS7830=y # CONFIG_USB_NET_RNDIS_HOST is not set # CONFIG_USB_NET_CDC_SUBSET is not set # CONFIG_USB_NET_ZAURUS is not set # CONFIG_WAN is not set CONFIG_ATM_DRIVERS=y CONFIG_ATM_DUMMY=y CONFIG_ATM_TCP=y CONFIG_ATM_LANAI=y # CONFIG_ATM_ENI is not set CONFIG_ATM_FIRESTREAM=y # CONFIG_ATM_ZATM is not set # CONFIG_ATM_NICSTAR is not set CONFIG_ATM_IDT77252=y CONFIG_ATM_IDT77252_DEBUG=y # CONFIG_ATM_IDT77252_RCV_ALL is not set CONFIG_ATM_IDT77252_USE_SUNI=y # CONFIG_ATM_AMBASSADOR is not set # CONFIG_ATM_HORIZON is not set # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E_MAYBE is not set # CONFIG_ATM_HE is not set CONFIG_FDDI=y # CONFIG_DEFXX is not set CONFIG_SKFP=y # CONFIG_HIPPI is not set # CONFIG_PLIP is not set # CONFIG_PPP is not set CONFIG_SLIP=y CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=y CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set CONFIG_NET_FC=y CONFIG_NETCONSOLE=y # CONFIG_NETCONSOLE_DYNAMIC is not set CONFIG_NETPOLL=y # CONFIG_NETPOLL_TRAP is not set CONFIG_NET_POLL_CONTROLLER=y CONFIG_VIRTIO_NET=y # CONFIG_ISDN is not set # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set CONFIG_INPUT_POLLDEV=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_EVDEV is not set CONFIG_INPUT_EVBUG=y # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y CONFIG_KEYBOARD_SUNKBD=y # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_XTKBD=y # CONFIG_KEYBOARD_NEWTON is not set CONFIG_KEYBOARD_STOWAWAY=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Hardware I/O ports # CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_CT82C710=y # CONFIG_SERIO_PARKBD is not set CONFIG_SERIO_PCIPS2=y CONFIG_SERIO_LIBPS2=y CONFIG_SERIO_RAW=y # CONFIG_GAMEPORT is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_NONSTANDARD=y CONFIG_COMPUTONE=y # CONFIG_ROCKETPORT is not set # CONFIG_CYCLADES is not set # CONFIG_DIGIEPCA is not set CONFIG_ESPSERIAL=y # CONFIG_MOXA_INTELLIO is not set CONFIG_MOXA_SMARTIO=y CONFIG_ISI=y # CONFIG_SYNCLINK is not set # CONFIG_SYNCLINKMP is not set CONFIG_SYNCLINK_GT=y # CONFIG_N_HDLC is not set # CONFIG_RISCOM8 is not set # CONFIG_SPECIALIX is not set # CONFIG_SX is not set # CONFIG_RIO is not set # CONFIG_STALDRV is not set CONFIG_NOZOMI=y # # Serial drivers # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_FIX_EARLYCON_MEM=y CONFIG_SERIAL_8250_PCI=y # CONFIG_SERIAL_8250_PNP is not set CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y # CONFIG_SERIAL_8250_MANY_PORTS is not set CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y CONFIG_SERIAL_8250_MCA=y # # Non-8250 serial port support # CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set CONFIG_PPDEV=y CONFIG_HVC_DRIVER=y # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_INTEL=y CONFIG_HW_RANDOM_AMD=y # CONFIG_HW_RANDOM_GEODE is not set CONFIG_HW_RANDOM_VIA=y CONFIG_NVRAM=y # CONFIG_RTC is not set CONFIG_GEN_RTC=y # CONFIG_GEN_RTC_X is not set # CONFIG_DTLK is not set CONFIG_R3964=y # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # CONFIG_MWAVE is not set # CONFIG_SCx200_GPIO is not set # CONFIG_PC8736x_GPIO is not set CONFIG_NSC_GPIO=y # CONFIG_CS5535_GPIO is not set CONFIG_RAW_DRIVER=y CONFIG_MAX_RAW_DEVS=256 CONFIG_HPET=y CONFIG_HPET_RTC_IRQ=y CONFIG_HPET_MMAP=y CONFIG_HANGCHECK_TIMER=y CONFIG_TCG_TPM=y # CONFIG_TCG_TIS is not set # CONFIG_TCG_NSC is not set CONFIG_TCG_ATMEL=y # CONFIG_TCG_INFINEON is not set CONFIG_TELCLOCK=y CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # # I2C Algorithms # CONFIG_I2C_ALGOBIT=y CONFIG_I2C_ALGOPCF=y CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support # CONFIG_I2C_ALI1535=y CONFIG_I2C_ALI1563=y # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set CONFIG_I2C_ELEKTOR=y # CONFIG_I2C_I801 is not set CONFIG_I2C_I810=y CONFIG_I2C_PIIX4=y # CONFIG_I2C_NFORCE2 is not set CONFIG_I2C_OCORES=y CONFIG_I2C_PARPORT=y CONFIG_I2C_PARPORT_LIGHT=y # CONFIG_I2C_PROSAVAGE is not set # CONFIG_I2C_SAVAGE4 is not set CONFIG_I2C_SIMTEC=y CONFIG_SCx200_ACB=y # CONFIG_I2C_SIS5595 is not set CONFIG_I2C_SIS630=y # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set CONFIG_I2C_PCA_ISA=y # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set CONFIG_PCF8575=y CONFIG_SENSORS_PCF8591=y # CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set CONFIG_I2C_DEBUG_CORE=y CONFIG_I2C_DEBUG_ALGO=y CONFIG_I2C_DEBUG_BUS=y # CONFIG_I2C_DEBUG_CHIP is not set # # SPI support # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set CONFIG_W1=y # CONFIG_W1_CON is not set # # 1-wire Bus Masters # CONFIG_W1_MASTER_MATROX=y CONFIG_W1_MASTER_DS2490=y # CONFIG_W1_MASTER_DS2482 is not set # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=y # CONFIG_W1_SLAVE_SMEM is not set CONFIG_W1_SLAVE_DS2433=y # CONFIG_W1_SLAVE_DS2433_CRC is not set CONFIG_W1_SLAVE_DS2760=y CONFIG_POWER_SUPPLY=y CONFIG_POWER_SUPPLY_DEBUG=y CONFIG_PDA_POWER=y CONFIG_BATTERY_DS2760=y CONFIG_HWMON=y CONFIG_HWMON_VID=y CONFIG_SENSORS_ABITUGURU=y # CONFIG_SENSORS_ABITUGURU3 is not set # CONFIG_SENSORS_AD7418 is not set CONFIG_SENSORS_ADM1021=y CONFIG_SENSORS_ADM1025=y CONFIG_SENSORS_ADM1026=y CONFIG_SENSORS_ADM1029=y # CONFIG_SENSORS_ADM1031 is not set CONFIG_SENSORS_ADM9240=y # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_K8TEMP is not set CONFIG_SENSORS_ASB100=y # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set CONFIG_SENSORS_F71805F=y # CONFIG_SENSORS_F71882FG is not set CONFIG_SENSORS_F75375S=y CONFIG_SENSORS_FSCHER=y # CONFIG_SENSORS_FSCPOS is not set CONFIG_SENSORS_FSCHMD=y CONFIG_SENSORS_GL518SM=y # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_CORETEMP is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM63 is not set # CONFIG_SENSORS_LM75 is not set # CONFIG_SENSORS_LM77 is not set # CONFIG_SENSORS_LM78 is not set # CONFIG_SENSORS_LM80 is not set # CONFIG_SENSORS_LM83 is not set CONFIG_SENSORS_LM85=y # CONFIG_SENSORS_LM87 is not set # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set CONFIG_SENSORS_LM93=y CONFIG_SENSORS_MAX1619=y CONFIG_SENSORS_MAX6650=y CONFIG_SENSORS_PC87360=y CONFIG_SENSORS_PC87427=y CONFIG_SENSORS_SIS5595=y # CONFIG_SENSORS_DME1737 is not set CONFIG_SENSORS_SMSC47M1=y CONFIG_SENSORS_SMSC47M192=y CONFIG_SENSORS_SMSC47B397=y CONFIG_SENSORS_ADS7828=y # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set CONFIG_SENSORS_VT8231=y CONFIG_SENSORS_W83781D=y # CONFIG_SENSORS_W83791D is not set CONFIG_SENSORS_W83792D=y # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set # CONFIG_SENSORS_W83L786NG is not set CONFIG_SENSORS_W83627HF=y CONFIG_SENSORS_W83627EHF=y # CONFIG_SENSORS_HDAPS is not set CONFIG_SENSORS_APPLESMC=y CONFIG_HWMON_DEBUG_CHIP=y CONFIG_THERMAL=y CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=y # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set CONFIG_ALIM1535_WDT=y CONFIG_ALIM7101_WDT=y # CONFIG_SC520_WDT is not set # CONFIG_EUROTECH_WDT is not set CONFIG_IB700_WDT=y CONFIG_IBMASR=y # CONFIG_WAFER_WDT is not set # CONFIG_I6300ESB_WDT is not set CONFIG_ITCO_WDT=y CONFIG_ITCO_VENDOR_SUPPORT=y CONFIG_IT8712F_WDT=y CONFIG_HP_WATCHDOG=y CONFIG_SC1200_WDT=y CONFIG_SCx200_WDT=y # CONFIG_PC87413_WDT is not set CONFIG_60XX_WDT=y CONFIG_SBC8360_WDT=y # CONFIG_SBC7240_WDT is not set # CONFIG_CPU5_WDT is not set CONFIG_SMSC37B787_WDT=y CONFIG_W83627HF_WDT=y CONFIG_W83697HF_WDT=y CONFIG_W83877F_WDT=y CONFIG_W83977F_WDT=y CONFIG_MACHZ_WDT=y CONFIG_SBC_EPX_C3_WATCHDOG=y # # ISA-based Watchdog Cards # CONFIG_PCWATCHDOG=y # CONFIG_MIXCOMWD is not set # CONFIG_WDT is not set # # PCI-based Watchdog Cards # CONFIG_PCIPCWATCHDOG=y CONFIG_WDTPCI=y # CONFIG_WDT_501_PCI is not set # # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set # # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # CONFIG_MFD_SM501=y # # Multimedia devices # # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=y # CONFIG_DVB_CAPTURE_DRIVERS is not set # CONFIG_DAB is not set # # Graphics support # CONFIG_AGP=y CONFIG_AGP_ALI=y # CONFIG_AGP_ATI is not set # CONFIG_AGP_AMD is not set CONFIG_AGP_AMD64=y CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set CONFIG_AGP_EFFICEON=y CONFIG_DRM=y # CONFIG_DRM_TDFX is not set # CONFIG_DRM_R128 is not set # CONFIG_DRM_RADEON is not set # CONFIG_DRM_I810 is not set # CONFIG_DRM_I830 is not set CONFIG_DRM_I915=y # CONFIG_DRM_MGA is not set # CONFIG_DRM_SIS is not set # CONFIG_DRM_VIA is not set # CONFIG_DRM_SAVAGE is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y # CONFIG_BACKLIGHT_CORGI is not set CONFIG_BACKLIGHT_PROGEAR=y # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support # CONFIG_VGA_CONSOLE=y CONFIG_VGACON_SOFT_SCROLLBACK=y CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64 CONFIG_VIDEO_SELECT=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y # CONFIG_HID is not set # # USB Input Devices # # CONFIG_USB_HID is not set # # USB HID Boot Protocol drivers # # CONFIG_USB_KBD is not set CONFIG_USB_MOUSE=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # # CONFIG_USB_DEVICEFS is not set # CONFIG_USB_DEVICE_CLASS is not set # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_SUSPEND is not set # CONFIG_USB_PERSIST is not set # CONFIG_USB_OTG is not set # # USB Host Controller Drivers # CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set CONFIG_USB_R8A66597_HCD=y # # USB Device Class drivers # CONFIG_USB_ACM=y CONFIG_USB_PRINTER=y # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # # may also be needed; see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DEBUG=y CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set CONFIG_USB_STORAGE_SDDR55=y # CONFIG_USB_STORAGE_JUMPSHOT is not set CONFIG_USB_STORAGE_ALAUDA=y CONFIG_USB_STORAGE_KARMA=y # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # CONFIG_USB_MDC800=y CONFIG_USB_MICROTEK=y CONFIG_USB_MON=y # # USB port drivers # CONFIG_USB_USS720=y # CONFIG_USB_SERIAL is not set # # USB Miscellaneous drivers # # CONFIG_USB_EMI62 is not set CONFIG_USB_EMI26=y # CONFIG_USB_ADUTUX is not set CONFIG_USB_AUERSWALD=y # CONFIG_USB_RIO500 is not set CONFIG_USB_LEGOTOWER=y CONFIG_USB_LCD=y # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set CONFIG_USB_CYTHERM=y # CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set # CONFIG_USB_SISUSBVGA is not set CONFIG_USB_LD=y # CONFIG_USB_TRANCEVIBRATOR is not set CONFIG_USB_IOWARRIOR=y # CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set CONFIG_MMC_UNSAFE_RESUME=y # # MMC/SD Card Drivers # # CONFIG_MMC_BLOCK is not set CONFIG_SDIO_UART=y # # MMC/SD Host Controller Drivers # # CONFIG_MMC_SDHCI is not set CONFIG_MMC_WBSD=y CONFIG_MMC_TIFM_SD=y # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # CONFIG_LEDS_CLEVO_MAIL=y # # LED Triggers # CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_INFINIBAND is not set CONFIG_EDAC=y # # Reporting subsystems # # CONFIG_EDAC_DEBUG is not set CONFIG_EDAC_MM_EDAC=y # CONFIG_EDAC_AMD76X is not set CONFIG_EDAC_E7XXX=y CONFIG_EDAC_E752X=y # CONFIG_EDAC_I82875P is not set CONFIG_EDAC_I82975X=y CONFIG_EDAC_I3000=y CONFIG_EDAC_I82860=y # CONFIG_EDAC_R82600 is not set # CONFIG_EDAC_I5000 is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y # # Conflicting RTC option has been selected, check GEN_RTC and RTC # # CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_DEBUG is not set # # RTC interfaces # # CONFIG_RTC_INTF_SYSFS is not set CONFIG_RTC_INTF_PROC=y # CONFIG_RTC_INTF_DEV is not set CONFIG_RTC_DRV_TEST=y # # I2C RTC drivers # # CONFIG_RTC_DRV_DS1307 is not set # CONFIG_RTC_DRV_DS1374 is not set CONFIG_RTC_DRV_DS1672=y # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set # CONFIG_RTC_DRV_ISL1208 is not set CONFIG_RTC_DRV_X1205=y CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # # SPI RTC drivers # # # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set CONFIG_RTC_DRV_DS1511=y CONFIG_RTC_DRV_DS1553=y CONFIG_RTC_DRV_DS1742=y CONFIG_RTC_DRV_STK17TA8=y CONFIG_RTC_DRV_M48T86=y # CONFIG_RTC_DRV_M48T59 is not set CONFIG_RTC_DRV_V3020=y # # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set CONFIG_AUXDISPLAY=y # # Userspace I/O # CONFIG_UIO=y # CONFIG_UIO_CIF is not set # # Firmware Drivers # # CONFIG_EDD is not set CONFIG_DELL_RBU=y # CONFIG_DCDBAS is not set CONFIG_DMIID=y # # File systems # CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y # CONFIG_EXT2_FS_SECURITY is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4DEV_FS=y CONFIG_EXT4DEV_FS_XATTR=y CONFIG_EXT4DEV_FS_POSIX_ACL=y # CONFIG_EXT4DEV_FS_SECURITY is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_JBD2=y # CONFIG_JBD2_DEBUG is not set CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y CONFIG_REISERFS_CHECK=y CONFIG_REISERFS_PROC_INFO=y CONFIG_REISERFS_FS_XATTR=y CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_REISERFS_FS_SECURITY is not set CONFIG_JFS_FS=y # CONFIG_JFS_POSIX_ACL is not set CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set CONFIG_JFS_STATISTICS=y CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set CONFIG_GFS2_FS=y # CONFIG_GFS2_FS_LOCKING_NOLOCK is not set # CONFIG_GFS2_FS_LOCKING_DLM is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y CONFIG_FUSE_FS=y # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=y # CONFIG_JOLIET is not set CONFIG_ZISOFS=y # CONFIG_UDF_FS is not set # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=y # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=y CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_NTFS_FS=y CONFIG_NTFS_DEBUG=y CONFIG_NTFS_RW=y # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # CONFIG_ADFS_FS=y CONFIG_ADFS_FS_RW=y CONFIG_AFFS_FS=y CONFIG_ECRYPT_FS=y # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set CONFIG_BEFS_FS=y CONFIG_BEFS_DEBUG=y # CONFIG_BFS_FS is not set CONFIG_EFS_FS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set CONFIG_HPFS_FS=y CONFIG_QNX4FS_FS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set CONFIG_UFS_FS=y CONFIG_UFS_FS_WRITE=y # CONFIG_UFS_DEBUG is not set CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set # CONFIG_NFSD_TCP is not set CONFIG_LOCKD=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_BIND34=y # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=y CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set CONFIG_CODA_FS=y # CONFIG_CODA_FS_OLD_API is not set # CONFIG_AFS_FS is not set # # Partition Types # CONFIG_PARTITION_ADVANCED=y # CONFIG_ACORN_PARTITION is not set # CONFIG_OSF_PARTITION is not set # CONFIG_AMIGA_PARTITION is not set # CONFIG_ATARI_PARTITION is not set # CONFIG_MAC_PARTITION is not set CONFIG_MSDOS_PARTITION=y CONFIG_BSD_DISKLABEL=y CONFIG_MINIX_SUBPARTITION=y CONFIG_SOLARIS_X86_PARTITION=y # CONFIG_UNIXWARE_DISKLABEL is not set # CONFIG_LDM_PARTITION is not set # CONFIG_SGI_PARTITION is not set # CONFIG_ULTRIX_PARTITION is not set CONFIG_SUN_PARTITION=y CONFIG_KARMA_PARTITION=y CONFIG_EFI_PARTITION=y # CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="iso8859-1" # CONFIG_NLS_CODEPAGE_437 is not set # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set # CONFIG_NLS_CODEPAGE_850 is not set CONFIG_NLS_CODEPAGE_852=y CONFIG_NLS_CODEPAGE_855=y CONFIG_NLS_CODEPAGE_857=y # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set CONFIG_NLS_CODEPAGE_862=y # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set CONFIG_NLS_CODEPAGE_950=y # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set CONFIG_NLS_CODEPAGE_1250=y # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_2=y CONFIG_NLS_ISO8859_3=y # CONFIG_NLS_ISO8859_4 is not set CONFIG_NLS_ISO8859_5=y CONFIG_NLS_ISO8859_6=y CONFIG_NLS_ISO8859_7=y CONFIG_NLS_ISO8859_9=y # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=y # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=y # CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y CONFIG_MAGIC_SYSRQ=y CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_FS=y CONFIG_HEADERS_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_LATENCYTOP is not set CONFIG_PROVIDE_OHCI1394_DMA_INIT=y CONFIG_SAMPLES=y # CONFIG_SAMPLE_KOBJECT is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_NONPROMISC_DEVMEM is not set CONFIG_EARLY_PRINTK=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_MPPARSE=y CONFIG_DOUBLEFAULT=y # CONFIG_SYSPROF is not set # CONFIG_MMIOTRACE_HOOKS is not set CONFIG_IO_DELAY_TYPE_0X80=0 CONFIG_IO_DELAY_TYPE_0XED=1 CONFIG_IO_DELAY_TYPE_UDELAY=2 CONFIG_IO_DELAY_TYPE_NONE=3 CONFIG_IO_DELAY_0X80=y # CONFIG_IO_DELAY_0XED is not set # CONFIG_IO_DELAY_UDELAY is not set # CONFIG_IO_DELAY_NONE is not set CONFIG_DEFAULT_IO_DELAY_TYPE=0 # # Security options # CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y CONFIG_SECURITY=y # CONFIG_SECURITY_NETWORK is not set CONFIG_SECURITY_CAPABILITIES=y CONFIG_SECURITY_FILE_CAPABILITIES=y # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set # CONFIG_CRYPTO_NULL is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y # CONFIG_CRYPTO_SHA512 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_ECB=y # CONFIG_CRYPTO_CBC is not set CONFIG_CRYPTO_PCBC=y # CONFIG_CRYPTO_LRW is not set # CONFIG_CRYPTO_XTS is not set CONFIG_CRYPTO_CTR=y # CONFIG_CRYPTO_GCM is not set CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_CRYPTD=y # CONFIG_CRYPTO_DES is not set # CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_BLOWFISH is not set CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y # CONFIG_CRYPTO_TWOFISH_586 is not set # CONFIG_CRYPTO_SERPENT is not set CONFIG_CRYPTO_AES=y CONFIG_CRYPTO_AES_586=y CONFIG_CRYPTO_CAST5=y CONFIG_CRYPTO_CAST6=y # CONFIG_CRYPTO_TEA is not set CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_KHAZAD=y # CONFIG_CRYPTO_ANUBIS is not set CONFIG_CRYPTO_SEED=y # CONFIG_CRYPTO_SALSA20 is not set CONFIG_CRYPTO_SALSA20_586=y CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_MICHAEL_MIC=y # CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_AUTHENC is not set CONFIG_CRYPTO_LZO=y CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_PADLOCK is not set # CONFIG_CRYPTO_DEV_GEODE is not set # CONFIG_CRYPTO_DEV_HIFN_795X is not set CONFIG_HAVE_KVM=y CONFIG_VIRTUALIZATION=y CONFIG_KVM=y # CONFIG_KVM_INTEL is not set CONFIG_KVM_AMD=y CONFIG_LGUEST=y CONFIG_VIRTIO=y CONFIG_VIRTIO_RING=y CONFIG_VIRTIO_PCI=y # CONFIG_VIRTIO_BALLOON is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=y CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y CONFIG_LZO_DECOMPRESS=y CONFIG_TEXTSEARCH=y CONFIG_TEXTSEARCH_KMP=y CONFIG_TEXTSEARCH_BM=y CONFIG_TEXTSEARCH_FSM=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y CONFIG_CHECK_SIGNATURE=y ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 11:11 ` Ingo Molnar @ 2008-03-03 18:57 ` Yinghai Lu 2008-03-04 19:28 ` Yinghai Lu 0 siblings, 1 reply; 10+ messages in thread From: Yinghai Lu @ 2008-03-03 18:57 UTC (permalink / raw) To: Ingo Molnar Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 389 bytes --] On Mon, Mar 3, 2008 at 3:11 AM, Ingo Molnar <mingo@elte.hu> wrote: > > well, the patch doesnt build with the attached .config: > > arch/x86/pci/acpi.c: In function 'pci_acpi_scan_root': > arch/x86/pci/acpi.c:224: warning: dereferencing 'void *' pointer > arch/x86/pci/acpi.c:224: error: request for member 'node' in something not a structure or union sorry, pease check this one. YH [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: get_mp_bus_early_v2.patch --] [-- Type: text/x-patch; name=get_mp_bus_early_v2.patch, Size: 12398 bytes --] x86: get mp_bus_to_node early v2 current on amd k8 system with multi ht chain, the numa_node of pci devices under /sys/devices/pci0000:80/* always 0, even that chain is on node 1 or 2 or 3. workaround: pcibus_to_node(bus) is used when we want to get node that pci_device is on. In struct device, we already have numa_node member. and we could use dev_to_node() /set_dev_node() to get and set numa_node in the device. set_dev_node is called in pci_device_add() with pcibus_to_node(bus). and pcibus_to_node use bus->sysdata for nodeid. the problem is when pci_add_device is called, bus->sysdata is not assigned correct nodeid yet. the result will be numa_node always is 0. pcibios_scan_root and pci_scan_root could take sysdata. So we need to get mp_bus_to_node mapping before these two are called. and get_mp_bus_to_node could get correct node for sysdata in root bus. in scanning of root bus, all child bus will take parent bus sysdata. So all pci_device->dev.numa_node will be assigned correctly automatically. later we could use dev_to_node(&pci_dev->dev) to get numa_node, and we could also could make other bus specific device get the correct numa_node too. this is one update version to pci_sysdata and jeff's pci_domain patch. and duplicated scan bus fix patch Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Index: linux-2.6/arch/x86/pci/Makefile_32 =================================================================== --- linux-2.6.orig/arch/x86/pci/Makefile_32 +++ linux-2.6/arch/x86/pci/Makefile_32 @@ -10,5 +10,6 @@ pci-y += legacy.o irq.o pci-$(CONFIG_X86_VISWS) := visws.o fixup.o pci-$(CONFIG_X86_NUMAQ) := numa.o irq.o +pci-$(CONFIG_NUMA) += mp_bus_to_node.o obj-y += $(pci-y) common.o early.o Index: linux-2.6/arch/x86/pci/common.c =================================================================== --- linux-2.6.orig/arch/x86/pci/common.c +++ linux-2.6/arch/x86/pci/common.c @@ -396,9 +396,14 @@ struct pci_bus * __devinit pcibios_scan_ return NULL; } + sd->node = get_mp_bus_to_node(busnum); + printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum); + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); - return pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + return bus; } extern u8 pci_cache_line_size; @@ -541,7 +546,7 @@ void pcibios_disable_device (struct pci_ pcibios_disable_irq(dev); } -struct pci_bus *__devinit pci_scan_bus_with_sysdata(int busno) +struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, int node) { struct pci_bus *bus = NULL; struct pci_sysdata *sd; @@ -556,10 +561,15 @@ struct pci_bus *__devinit pci_scan_bus_w printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busno); return NULL; } - sd->node = -1; - bus = pci_scan_bus(busno, &pci_root_ops, sd); + sd->node = node; + bus = pci_scan_bus(busno, ops, sd); if (!bus) kfree(sd); return bus; } + +struct pci_bus *pci_scan_bus_with_sysdata(int busno) +{ + return pci_scan_bus_on_node(busno, &pci_root_ops, -1); +} Index: linux-2.6/arch/x86/pci/irq.c =================================================================== --- linux-2.6.orig/arch/x86/pci/irq.c +++ linux-2.6/arch/x86/pci/irq.c @@ -136,9 +136,11 @@ static void __init pirq_peer_trick(void) busmap[e->bus] = 1; } for(i = 1; i < 256; i++) { + int node; if (!busmap[i] || pci_find_bus(0, i)) continue; - if (pci_scan_bus_with_sysdata(i)) + node = get_mp_bus_to_node(i); + if (pci_scan_bus_on_node(i, &pci_root_ops, node)) printk(KERN_INFO "PCI: Discovered primary peer " "bus %02x [IRQ]\n", i); } Index: linux-2.6/arch/x86/pci/k8-bus_64.c =================================================================== --- linux-2.6.orig/arch/x86/pci/k8-bus_64.c +++ linux-2.6/arch/x86/pci/k8-bus_64.c @@ -1,7 +1,9 @@ #include <linux/init.h> #include <linux/pci.h> +#include <asm/pci-direct.h> #include <asm/mpspec.h> #include <linux/cpumask.h> +#include <linux/topology.h> /* * This discovers the pcibus <-> node mapping on AMD K8. @@ -20,64 +22,96 @@ #define SUBORDINATE_LDT_BUS_NUMBER(dword) ((dword >> 16) & 0xFF) #define PCI_DEVICE_ID_K8HTCONFIG 0x1100 +#define BUS_NR 256 + +static int mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node = -1; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return node; + + node = mp_bus_to_node[busnum]; + + /* + * let numa_node_id to decide it later in dma_alloc_pages + * if there is no ram on that node + */ + if (node != -1 && !node_online(node)) + node = -1; + + return node; +} + /** - * fill_mp_bus_to_cpumask() + * early_fill_mp_bus_to_node() + * called before pcibios_scan_root and pci_scan_bus * fills the mp_bus_to_cpumask array based according to the LDT Bus Number * Registers found in the K8 northbridge */ __init static int -fill_mp_bus_to_cpumask(void) +early_fill_mp_bus_to_node(void) { - struct pci_dev *nb_dev = NULL; int i, j; + unsigned slot; u32 ldtbus, nid; + u32 id; static int lbnr[3] = { LDT_BUS_NUMBER_REGISTER_0, LDT_BUS_NUMBER_REGISTER_1, LDT_BUS_NUMBER_REGISTER_2 }; - while ((nb_dev = pci_get_device(PCI_VENDOR_ID_AMD, - PCI_DEVICE_ID_K8HTCONFIG, nb_dev))) { - pci_read_config_dword(nb_dev, NODE_ID_REGISTER, &nid); + for (i = 0; i < BUS_NR; i++) + mp_bus_to_node[i] = -1; + + if (!early_pci_allowed()) + return -1; + + for (slot = 0x18; slot < 0x20; slot++) { + id = read_pci_config(0, slot, 0, PCI_VENDOR_ID); + if (id != (PCI_VENDOR_ID_AMD | (PCI_DEVICE_ID_K8HTCONFIG<<16))) + break; + nid = read_pci_config(0, slot, 0, NODE_ID_REGISTER); for (i = 0; i < NR_LDT_BUS_NUMBER_REGISTERS; i++) { - pci_read_config_dword(nb_dev, lbnr[i], &ldtbus); + ldtbus = read_pci_config(0, slot, 0, lbnr[i]); /* * if there are no busses hanging off of the current * ldt link then both the secondary and subordinate * bus number fields are set to 0. - * + * * RED-PEN * This is slightly broken because it assumes - * HT node IDs == Linux node ids, which is not always + * HT node IDs == Linux node ids, which is not always * true. However it is probably mostly true. */ if (!(SECONDARY_LDT_BUS_NUMBER(ldtbus) == 0 && SUBORDINATE_LDT_BUS_NUMBER(ldtbus) == 0)) { for (j = SECONDARY_LDT_BUS_NUMBER(ldtbus); j <= SUBORDINATE_LDT_BUS_NUMBER(ldtbus); - j++) { - struct pci_bus *bus; - struct pci_sysdata *sd; - - long node = NODE_ID(nid); - /* Algorithm a bit dumb, but - it shouldn't matter here */ - bus = pci_find_bus(0, j); - if (!bus) - continue; - if (!node_online(node)) - node = 0; - - sd = bus->sysdata; - sd->node = node; - } + j++) { + int node = NODE_ID(nid); + mp_bus_to_node[j] = (unsigned char)node; + } } } } + for (i = 0; i < BUS_NR; i++) { + int node = mp_bus_to_node[i]; + if (node >= 0) + printk(KERN_DEBUG "bus: %02x to node: %02x\n", i, node); + } return 0; } -fs_initcall(fill_mp_bus_to_cpumask); +postcore_initcall(early_fill_mp_bus_to_node); Index: linux-2.6/arch/x86/pci/legacy.c =================================================================== --- linux-2.6.orig/arch/x86/pci/legacy.c +++ linux-2.6/arch/x86/pci/legacy.c @@ -12,6 +12,7 @@ static void __devinit pcibios_fixup_peer_bridges(void) { int n, devfn; + long node; if (pcibios_last_bus <= 0 || pcibios_last_bus >= 0xff) return; @@ -21,12 +22,13 @@ static void __devinit pcibios_fixup_peer u32 l; if (pci_find_bus(0, n)) continue; + node = get_mp_bus_to_node(n); for (devfn = 0; devfn < 256; devfn += 8) { if (!raw_pci_read(0, n, devfn, PCI_VENDOR_ID, 2, &l) && l != 0x0000 && l != 0xffff) { DBG("Found device at %02x:%02x [%04x]\n", n, devfn, l); printk(KERN_INFO "PCI: Discovered peer bus %02x\n", n); - pci_scan_bus_with_sysdata(n); + pci_scan_bus_on_node(n, &pci_root_ops, node); break; } } Index: linux-2.6/arch/x86/pci/mp_bus_to_node.c =================================================================== --- /dev/null +++ linux-2.6/arch/x86/pci/mp_bus_to_node.c @@ -0,0 +1,23 @@ +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/topology.h> + +#define BUS_NR 256 + +static unsigned char mp_bus_to_node[BUS_NR]; + +void set_mp_bus_to_node(int busnum, int node) +{ + if (busnum >= 0 && busnum < BUS_NR) + mp_bus_to_node[busnum] = (unsigned char) node; +} + +int get_mp_bus_to_node(int busnum) +{ + int node; + + if (busnum < 0 || busnum > (BUS_NR - 1)) + return 0; + node = mp_bus_to_node[busnum]; + return node; +} Index: linux-2.6/include/asm-x86/pci.h =================================================================== --- linux-2.6.orig/include/asm-x86/pci.h +++ linux-2.6/include/asm-x86/pci.h @@ -20,6 +20,8 @@ struct pci_sysdata { }; /* scan a bus after allocating a pci_sysdata for it */ +extern struct pci_bus *pci_scan_bus_on_node(int busno, struct pci_ops *ops, + int node); extern struct pci_bus *pci_scan_bus_with_sysdata(int busno); static inline int pci_domain_nr(struct pci_bus *bus) Index: linux-2.6/include/asm-x86/topology.h =================================================================== --- linux-2.6.orig/include/asm-x86/topology.h +++ linux-2.6/include/asm-x86/topology.h @@ -165,8 +165,19 @@ extern int __node_distance(int, int); #define node_distance(a, b) __node_distance(a, b) #endif +int get_mp_bus_to_node(int busnum); +void set_mp_bus_to_node(int busnum, int node); + #else /* CONFIG_NUMA */ +static inline int get_mp_bus_to_node(int busnum) +{ + return 0; +} +static inline void set_mp_bus_to_node(int busnum, int node) +{ +} + #include <asm-generic/topology.h> #endif Index: linux-2.6/arch/x86/pci/acpi.c =================================================================== --- linux-2.6.orig/arch/x86/pci/acpi.c +++ linux-2.6/arch/x86/pci/acpi.c @@ -191,7 +191,10 @@ struct pci_bus * __devinit pci_acpi_scan { struct pci_bus *bus; struct pci_sysdata *sd; + int node; +#ifdef CONFIG_ACPI_NUMA int pxm; +#endif dmi_check_system(acpi_pciprobe_dmi_table); @@ -201,54 +204,53 @@ struct pci_bus * __devinit pci_acpi_scan return NULL; } - /* Allocate per-root-bus (not per bus) arch-specific data. - * TODO: leak; this memory is never freed. - * It's arguable whether it's worth the trouble to care. - */ - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) { - printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); - return NULL; - } - - sd->domain = domain; - sd->node = -1; - - pxm = acpi_get_pxm(device->handle); + node = -1; #ifdef CONFIG_ACPI_NUMA + pxm = acpi_get_pxm(device->handle); if (pxm >= 0) - sd->node = pxm_to_node(pxm); + node = pxm_to_node(pxm); + if (node != -1) + set_mp_bus_to_node(busnum, node); + else + node = get_mp_bus_to_node(busnum); #endif - /* - * Maybe the desired pci bus has been already scanned. In such case - * it is unnecessary to scan the pci bus with the given domain,busnum. - */ + bus = pci_find_bus(domain, busnum); if (bus) { - /* - * If the desired bus exits, the content of bus->sysdata will - * be replaced by sd. + /* already scanned ?*/ + sd = bus->sysdata; + sd->node = node; + } else { + /* Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. */ - memcpy(bus->sysdata, sd, sizeof(*sd)); - kfree(sd); - } else - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", + busnum); + return NULL; + } - if (!bus) - kfree(sd); + sd->domain = domain; + sd->node = node; + + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); + } #ifdef CONFIG_ACPI_NUMA - if (bus != NULL) { + if (bus) { if (pxm >= 0) { - printk("bus %d -> pxm %d -> node %d\n", - busnum, pxm, pxm_to_node(pxm)); + printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", + busnum, pxm, node); } } #endif if (bus && (pci_probe & PCI_USE__CRS)) get_current_resources(device, busnum, bus); - return bus; } ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 18:57 ` Yinghai Lu @ 2008-03-04 19:28 ` Yinghai Lu 2008-03-04 19:34 ` Yinghai Lu 0 siblings, 1 reply; 10+ messages in thread From: Yinghai Lu @ 2008-03-04 19:28 UTC (permalink / raw) To: Ingo Molnar Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 91 bytes --] I updated Yakui's patch, so it could be applied after x86.git#testing Please check it YH [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: acpi_scan_root_after.patch --] [-- Type: text/x-patch; name=acpi_scan_root_after.patch, Size: 2601 bytes --] From : Zhao Yakui <yakui.zhao@intel.com> [PATCH] Unneccessary to scan the PCI bus already scanned v2 http://bugzilla.kernel.org/show_bug.cgi?id=10124 commit 08f1c192c3c32797068bfe97738babb3295bbf42 Author: Muli Ben-Yehuda <muli@il.ibm.com> Date: Sun Jul 22 00:23:39 2007 +0300 x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. that replace pcibios_scan_root by pci_scan_bus_parented... but in pcibios_scan_root we have check about scanned bus Yinghai make it can be applied after patches in x86.git#tesing Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c index 2c1a651..7e2bfe3 100644 --- a/arch/x86/pci/acpi.c +++ b/arch/x86/pci/acpi.c @@ -213,33 +213,38 @@ struct pci_bus * __devinit pci_acpi_scan_root(struct acpi_device *device, int do set_mp_bus_to_node(busnum, node); else node = get_mp_bus_to_node(busnum); - - if (node != -1 && !node_online(node)) - node = -1; #endif - /* Allocate per-root-bus (not per bus) arch-specific data. - * TODO: leak; this memory is never freed. - * It's arguable whether it's worth the trouble to care. - */ - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) { - printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); - return NULL; - } + bus = pci_find_bus(domain, busnum); + if (bus) { + /* already scanned ?*/ + sd = bus->sysdata; + sd->node = node; + } else { + /* Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. + */ + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", + busnum); + return NULL; + } - sd->domain = domain; - sd->node = node; + sd->domain = domain; + sd->node = node; - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); - if (!bus) - kfree(sd); + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); + } #ifdef CONFIG_ACPI_NUMA if (bus) { if (pxm >= 0) { printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", - busnum, pxm, sd->node); + busnum, pxm, node); } } #endif ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-04 19:28 ` Yinghai Lu @ 2008-03-04 19:34 ` Yinghai Lu 2008-03-04 21:23 ` Ingo Molnar 0 siblings, 1 reply; 10+ messages in thread From: Yinghai Lu @ 2008-03-04 19:34 UTC (permalink / raw) To: Ingo Molnar Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List [-- Attachment #1: Type: text/plain, Size: 204 bytes --] On Tue, Mar 4, 2008 at 11:28 AM, Yinghai Lu <yhlu.kernel@gmail.com> wrote: > I updated Yakui's patch, so it could be applied after x86.git#testing > > Please check it > > YH use this v2 one please YH [-- Warning: decoded text below may be mangled, UTF-8 assumed --] [-- Attachment #2: acpi_scan_root_after_v2.patch --] [-- Type: text/x-patch; name=acpi_scan_root_after_v2.patch, Size: 2478 bytes --] From : Zhao Yakui <yakui.zhao@intel.com> [PATCH] Unneccessary to scan the PCI bus already scanned v2 http://bugzilla.kernel.org/show_bug.cgi?id=10124 commit 08f1c192c3c32797068bfe97738babb3295bbf42 Author: Muli Ben-Yehuda <muli@il.ibm.com> Date: Sun Jul 22 00:23:39 2007 +0300 x86-64: introduce struct pci_sysdata to facilitate sharing of ->sysdata This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. that replace pcibios_scan_root by pci_scan_bus_parented... but in pcibios_scan_root we have check about scanned bus Yinghai make it can be applied after patches in x86.git#tesing Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Index: linux-2.6/arch/x86/pci/acpi.c =================================================================== --- linux-2.6.orig/arch/x86/pci/acpi.c +++ linux-2.6/arch/x86/pci/acpi.c @@ -218,28 +218,36 @@ struct pci_bus * __devinit pci_acpi_scan node = -1; #endif - /* Allocate per-root-bus (not per bus) arch-specific data. - * TODO: leak; this memory is never freed. - * It's arguable whether it's worth the trouble to care. - */ - sd = kzalloc(sizeof(*sd), GFP_KERNEL); - if (!sd) { - printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", busnum); - return NULL; - } + bus = pci_find_bus(domain, busnum); + if (bus) { + /* already scanned ?*/ + sd = bus->sysdata; + sd->node = node; + } else { + /* Allocate per-root-bus (not per bus) arch-specific data. + * TODO: leak; this memory is never freed. + * It's arguable whether it's worth the trouble to care. + */ + sd = kzalloc(sizeof(*sd), GFP_KERNEL); + if (!sd) { + printk(KERN_ERR "PCI: OOM, not probing PCI bus %02x\n", + busnum); + return NULL; + } - sd->domain = domain; - sd->node = node; + sd->domain = domain; + sd->node = node; - bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); - if (!bus) - kfree(sd); + bus = pci_scan_bus_parented(NULL, busnum, &pci_root_ops, sd); + if (!bus) + kfree(sd); + } #ifdef CONFIG_ACPI_NUMA if (bus) { if (pxm >= 0) { printk(KERN_DEBUG "bus %02x -> pxm %d -> node %d\n", - busnum, pxm, sd->node); + busnum, pxm, node); } } #endif ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-04 19:34 ` Yinghai Lu @ 2008-03-04 21:23 ` Ingo Molnar 0 siblings, 0 replies; 10+ messages in thread From: Ingo Molnar @ 2008-03-04 21:23 UTC (permalink / raw) To: Yinghai Lu Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List * Yinghai Lu <yhlu.kernel@gmail.com> wrote: > use this v2 one please thanks, applied. (but this must ultimately go via the ACPI/PCI trees i suspect, as it patches arch/x86/pci/acpi.c) Ingo ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 10:01 ` [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned Yinghai Lu 2008-03-03 10:10 ` Ingo Molnar @ 2008-03-03 10:11 ` Ingo Molnar 2008-03-03 10:30 ` Yinghai Lu 1 sibling, 1 reply; 10+ messages in thread From: Ingo Molnar @ 2008-03-03 10:11 UTC (permalink / raw) To: Yinghai Lu Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List i also had to hand-merge the x86.git#testing patch below - could you double-check that it's needed in this form? Ingo -----------> Subject: x86/acpi: make dev_to_node return online node From: Yinghai Lu <Yinghai.Lu@Sun.COM> Date: Wed, 20 Feb 2008 12:41:52 -0800 some numa system (with multi HT chains) may return node without ram. aka it is not online. Try to get an online node, otherwise return -1 Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> --- arch/x86/pci/acpi.c | 3 +++ 1 file changed, 3 insertions(+) Index: linux-x86.q/arch/x86/pci/acpi.c =================================================================== --- linux-x86.q.orig/arch/x86/pci/acpi.c +++ linux-x86.q/arch/x86/pci/acpi.c @@ -213,6 +213,9 @@ struct pci_bus * __devinit pci_acpi_scan set_mp_bus_to_node(busnum, node); else node = get_mp_bus_to_node(busnum); + + if (node != -1 && !node_online(node)) + node = -1; #endif bus = pci_find_bus(domain, busnum); ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned. 2008-03-03 10:11 ` Ingo Molnar @ 2008-03-03 10:30 ` Yinghai Lu 0 siblings, 0 replies; 10+ messages in thread From: Yinghai Lu @ 2008-03-03 10:30 UTC (permalink / raw) To: Ingo Molnar Cc: Greg KH, Muli Ben-Yehuda, Zhao Yakui, lenb, linux-acpi, Linux Kernel Mailing List On Mon, Mar 3, 2008 at 2:11 AM, Ingo Molnar <mingo@elte.hu> wrote: > > i also had to hand-merge the x86.git#testing patch below - could you > double-check that it's needed in this form? > > Ingo > > -----------> > Subject: x86/acpi: make dev_to_node return online node > From: Yinghai Lu <Yinghai.Lu@Sun.COM> > Date: Wed, 20 Feb 2008 12:41:52 -0800 > > some numa system (with multi HT chains) may return node without ram. aka it > is not online. Try to get an online node, otherwise return -1 > > Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> > Signed-off-by: Ingo Molnar <mingo@elte.hu> > --- > arch/x86/pci/acpi.c | 3 +++ > 1 file changed, 3 insertions(+) > > Index: linux-x86.q/arch/x86/pci/acpi.c > =================================================================== > --- linux-x86.q.orig/arch/x86/pci/acpi.c > +++ linux-x86.q/arch/x86/pci/acpi.c > @@ -213,6 +213,9 @@ struct pci_bus * __devinit pci_acpi_scan > set_mp_bus_to_node(busnum, node); > else > node = get_mp_bus_to_node(busnum); > + > + if (node != -1 && !node_online(node)) > + node = -1; > #endif still needed... YH ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2008-03-04 21:24 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
[not found] <1204525186.4080.11.camel@yakui_zhao.sh.intel.com>
[not found] ` <20080303073214.GA5934@elte.hu>
[not found] ` <86802c440803030006m1879838awc238f07bc98ed43e@mail.gmail.com>
[not found] ` <86802c440803030030p4ff9cec5tdb25d1cdc131d377@mail.gmail.com>
2008-03-03 10:01 ` [PATCH] ACPI: Unneccessary to scan the PCI bus already scanned Yinghai Lu
2008-03-03 10:10 ` Ingo Molnar
2008-03-03 10:33 ` Yinghai Lu
2008-03-03 11:11 ` Ingo Molnar
2008-03-03 18:57 ` Yinghai Lu
2008-03-04 19:28 ` Yinghai Lu
2008-03-04 19:34 ` Yinghai Lu
2008-03-04 21:23 ` Ingo Molnar
2008-03-03 10:11 ` Ingo Molnar
2008-03-03 10:30 ` Yinghai Lu
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).