LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe
@ 2008-03-17  4:25 KOSAKI Motohiro
  2008-03-17 13:32 ` KOSAKI Motohiro
  2008-03-18  7:17 ` Andrew Morton
  0 siblings, 2 replies; 4+ messages in thread
From: KOSAKI Motohiro @ 2008-03-17  4:25 UTC (permalink / raw)
  To: LKML; +Cc: kosaki.motohiro

[-- Attachment #1: Type: text/plain, Size: 1546 bytes --]

Hi

I found strange message at 2.6.25-rc5-mm1 booting.
and it is always reproduce.


and, Eric Piel's spinlock related patch(below URL) can't fixed my problem.
http://marc.info/?l=linux-kernel&m=120561027011749&w=2

Is this known bug?
or should i do bisect?



-------------------------------------------------------------------
BUG: spinlock wrong CPU on CPU#3, udevd/2495
 lock: a040000058246510, .magic: dead4ead, .owner: udevd/2495, .owner_cpu: 2

Call Trace:
 [<a000000100015f00>] show_stack+0x80/0xa0
                                sp=e00001609262fbd0 bsp=e000016092620fd8
 [<a000000100015f50>] dump_stack+0x30/0x60
                                sp=e00001609262fda0 bsp=e000016092620fc0
 [<a0000001004674a0>] spin_bug+0x1a0/0x1c0
                                sp=e00001609262fda0 bsp=e000016092620f90
 [<a000000100467590>] _raw_spin_unlock+0xd0/0x120
                                sp=e00001609262fda0 bsp=e000016092620f60
 [<a00000010082bfe0>] _spin_unlock+0x20/0x40
                                sp=e00001609262fda0 bsp=e000016092620f40
 [<a000000100138100>] do_wp_page+0x500/0xfe0
                                sp=e00001609262fda0 bsp=e000016092620ed8
 [<a00000010013c560>] handle_mm_fault+0xe80/0x10e0
                                sp=e00001609262fda0 bsp=e000016092620e50
 [<a00000010006c140>] ia64_do_page_fault+0x600/0xa40
                                sp=e00001609262fda0 bsp=e000016092620df0
 [<a00000010000abe0>] ia64_leave_kernel+0x0/0x270
                                sp=e00001609262fe30 bsp=e000016092620df0



[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 24906 bytes --]

Linux version 2.6.25-rc5-mm1 (kosaki@PQ-muneda) (gcc version 4.1.2 20070626 (Red Hat 4.1.2-14)) #35 SMP Mon Mar 17 12:35:20 JST 2008
EFI v1.10 by Fujitsu: SALsystab=0x7fdebe00 ACPI 2.0=0x7f9a8000 SMBIOS=0xf0000
booting generic kernel on platform dig
ACPI: RSDP 7F9A8000, 0024 (r2 FUJITS)
ACPI: XSDT 7F9FDF70, 005C (r1 FUJITS PQ              3 FJ          1)
ACPI: FACP 7F9FC780, 00F4 (r3 FUJITS PQ              1 FJ          1)
ACPI: DSDT 7F9A8068, 54713 (r2 FUJITS PQ              1 MSFT  3000001)
ACPI: FACS 7F9A8028, 0040
ACPI: APIC 7F9FC878, 06F6 (r1 FUJITS PQ              1 FJ          1)
ACPI: SPCR 7F9FCF70, 0050 (r1 FUJITS PQ              1 FJ          1)
ACPI: SRAT 7F9FCFC0, 0E00 (r1 FUJITS PQ              1 FJ          1)
ACPI: SLIT 7F9FDDC0, 012C (r1 FUJITS PQ              1 FJ          1)
ACPI: SPMI 7F9FDEF0, 0054 (r1 FUJITS PQ              1 FJ          1)
ACPI: WSPT 7F9FDF48, 0028 (r1 FUJITS PQ              1 FJ          1)
Number of logical nodes in system = 16
Number of memory chunks in system = 18
Reserving 256MB of memory at 256MB for crashkernel (System RAM: 7904MB)
Entering add_active_range(2, 256, 29440) 0 entries of 51200 used
Entering add_active_range(2, 4227072, 4259840) 1 entries of 51200 used
Entering add_active_range(3, 23069696, 23134208) 2 entries of 51200 used
Initial ramdisk at: 0xe0000000711a7000 (5099270 bytes)
SAL 3.20: FUJITSU LIMITED PRIMEQUEST version 3.4
SAL Platform features: None
SAL: AP wakeup using external interrupt vector 0xf0
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0001) vector 30
8 CPUs available, 128 CPUs total
MCA related initialization done
sizeof(struct page) = 64
Zone PFN ranges:
  DMA           256 ->    65536
  Normal      65536 -> 23134208
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
    2:      256 ->    29440
    2:  4227072 ->  4259840
    3: 23069696 -> 23134208
Could not find start_pfn for node 0
On node 0 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 1
On node 1 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
On node 2 totalpages: 61952
  DMA zone: 63 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 29121 pages, LIFO batch:1
  Normal zone: 4096 pages used for memmap
  Normal zone: 28672 pages, LIFO batch:1
  Movable zone: 0 pages used for memmap
On node 3 totalpages: 64512
  DMA zone: 0 pages used for memmap
  Normal zone: 63 pages used for memmap
  Normal zone: 64449 pages, LIFO batch:1
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 4
On node 4 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 5
On node 5 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 6
On node 6 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 7
On node 7 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 8
On node 8 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 9
On node 9 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 10
On node 10 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 11
On node 11 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 12
On node 12 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 13
On node 13 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 14
On node 14 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
Could not find start_pfn for node 15
On node 15 totalpages: 0
  DMA zone: 0 pages used for memmap
  Normal zone: 0 pages used for memmap
  Movable zone: 0 pages used for memmap
SMP: Allowing 128 CPUs, 120 hotplug CPUs
Built 16 zonelists in Zone order, mobility grouping on.  Total pages: 122242
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi0:\EFI\redhat\vmlinuz-kosatest root=/dev/VolGroup00/LogVol00  console=ttyS0 noquiet selinux=0 crashkernel=256M@256M vector=percpu ro
PID hash table entries: 4096 (order: 12, 32768 bytes)
CPU 0: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
Console: colour VGA+ 80x25
Placing software IO TLB between 0x50e0000 - 0x90e0000
Memory: 7691584k/7809088k available (8371k code, 402112k reserved, 5488k data, 1728k init)
SLUB: Genslabs=17, HWalign=128, Order=0-4, MinObjects=60, CPUs=128, Nodes=1024
Calibrating delay loop... 3194.88 BogoMIPS (lpj=6389760)
Dentry cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 6, 4194304 bytes)
Mount-cache hash table entries: 4096
ACPI: Core revision 20070126
Boot processor id 0x0/0x1
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 138 cycles)
CPU 1: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 2: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 138 cycles)
CPU 2: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 138 cycles)
CPU 3: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 4: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 515 cycles)
CPU 4: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 5: synchronized ITC with CPU 0 (last diff 28 cycles, maxerr 459 cycles)
CPU 5: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 6: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 514 cycles)
CPU 6: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 515 cycles)
CPU 7: base freq=266.666MHz, ITC ratio=6/4, ITC freq=399.999MHz
Brought up 8 CPUs
Total of 8 processors activated (25559.04 BogoMIPS).
net_namespace: 328 bytes
DMI 2.3 present.
NET: Registered protocol family 16
ACPI: bus type pci registered
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: DMI System Vendor: <NULL>
ACPI: DMI Product Name: <NULL>
ACPI: DMI Product Version: <NULL>
ACPI: DMI Board Name: <NULL>
ACPI: DMI BIOS Vendor: FUJITSU LIMITED
ACPI: DMI BIOS Date: 1/17/2008
ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [SNFF] (0000:ff)
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:1f.0: quirk: region 0c00-0c7f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0c80-0cbf claimed by ICH6 GPIO
pci 0000:01:01.0: Boot video device
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2PB._PRT]
ACPI: PCI Root Bridge [PCI1] (0001:00)
pci 0001:02:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0001:02:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0001:08:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0001:08:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0001:12:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0001:12:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0001:05:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0001:05:00.2: PXH quirk detected; SHPC device MSI disabled
pci 0001:0d:00.0: PXH quirk detected; SHPC device MSI disabled
pci 0001:0d:00.2: PXH quirk detected; SHPC device MSI disabled
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B1.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B1.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B2._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B2.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B2.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B4.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I2B4.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B1.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B1.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B3._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B3.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B3.P2PB._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6.P2PA._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6.P2PA.P2P8._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.I3B6.P2PA.P2P9._PRT]
ACPI: PCI Root Bridge [PCI2] (0002:00)
ACPI: PCI Root Bridge [PCI3] (0003:00)
ACPI: PCI Root Bridge [PCI4] (0004:00)
ACPI: PCI Root Bridge [PCI5] (0005:00)
ACPI: PCI Root Bridge [PCI6] (0006:00)
ACPI: PCI Root Bridge [PCI7] (0007:00)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
GSI 8 (edge, high) -> CPU 0 (0x0001) vector 49
GSI 4 (edge, high) -> CPU 0 (0x0001) vector 50
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
SCSI subsystem initialized
Time: itc clocksource has been installed.
system 00:02: ioport range 0x4d0-0x4d1 has been reserved
system 00:02: ioport range 0xc00-0xc7f has been reserved
system 00:02: ioport range 0xc80-0xcbf has been reserved
system 00:02: ioport range 0xcf8-0xcff has been reserved
system 00:02: ioport range 0xd80-0xd81 has been reserved
system 00:02: iomem range 0xfee00000-0xfeefffff has been reserved
NET: Registered protocol family 2
IP route cache hash table entries: 65536 (order: 3, 524288 bytes)
TCP established hash table entries: 262144 (order: 6, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 5, 2097152 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 4928kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
Please use IA-32 EL for executing IA-32 binaries
Total HugeTLB memory allocated, 0
SGI XFS with large block/inode numbers, no debug enabled
msgmni has been set to 15032 for ipc namespace a000000100ce2480
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
pci 0000:01:00.0: Firmware left e100 interrupts enabled; disabling
pci 0000:01:08.0: Firmware left e100 interrupts enabled; disabling
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:00:01.1:pcie00]
Allocate Port Service[0001:00:01.1:pcie01]
Allocate Port Service[0001:00:01.1:pcie03]
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:00:01.2:pcie00]
Allocate Port Service[0001:00:01.2:pcie01]
Allocate Port Service[0001:00:01.2:pcie03]
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:00:01.4:pcie00]
Allocate Port Service[0001:00:01.4:pcie01]
Allocate Port Service[0001:00:01.4:pcie03]
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:00:02.1:pcie00]
Allocate Port Service[0001:00:02.1:pcie01]
Allocate Port Service[0001:00:02.1:pcie03]
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:00:02.3:pcie00]
Allocate Port Service[0001:00:02.3:pcie01]
Allocate Port Service[0001:00:02.3:pcie03]
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:00:02.6:pcie00]
Allocate Port Service[0001:00:02.6:pcie01]
Allocate Port Service[0001:00:02.6:pcie03]
GSI 16 (level, low) -> CPU 0 (0x0001) vector 51
ACPI: PCI Interrupt 0001:1e:00.0[A] -> GSI 16 (level, low) -> IRQ 51
assign_interrupt_mode Found MSI capability
ACPI: PCI Interrupt 0001:1f:08.0[A] -> GSI 16 (level, low) -> IRQ 51
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:1f:08.0:pcie22]
GSI 17 (level, low) -> CPU 0 (0x0001) vector 52
ACPI: PCI Interrupt 0001:1f:09.0[A] -> GSI 17 (level, low) -> IRQ 52
assign_interrupt_mode Found MSI capability
Allocate Port Service[0001:1f:09.0:pcie22]
_OSC FW not grant req. control
AER service couldn't init device 0001:00:01.1:pcie01 - no _OSC support
_OSC FW not grant req. control
AER service couldn't init device 0001:00:01.2:pcie01 - no _OSC support
_OSC FW not grant req. control
AER service couldn't init device 0001:00:01.4:pcie01 - no _OSC support
_OSC FW not grant req. control
AER service couldn't init device 0001:00:02.1:pcie01 - no _OSC support
_OSC FW not grant req. control
AER service couldn't init device 0001:00:02.3:pcie01 - no _OSC support
_OSC FW not grant req. control
AER service couldn't init device 0001:00:02.6:pcie01 - no _OSC support
EFI Time Services Driver v0.4
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
00:05: ttyS0 at I/O 0x3f8 (irq = 50) is a 16550A
console [ttyS0] enabled
brd: module loaded
Intel(R) PRO/1000 Network Driver - version 7.3.20-k2
Copyright (c) 1999-2006 Intel Corporation.
e1000e: Intel(R) PRO/1000 Network Driver - 0.2.0
e1000e: Copyright (c) 1999-2007 Intel Corporation.
tg3.c:v3.87 (December 20, 2007)
GSI 408 (level, low) -> CPU 0 (0x0001) vector 53
ACPI: PCI Interrupt 0001:03:01.0[A] -> GSI 408 (level, low) -> IRQ 53
eth0: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:a4
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 409 (level, low) -> CPU 0 (0x0001) vector 54
ACPI: PCI Interrupt 0001:03:01.1[B] -> GSI 409 (level, low) -> IRQ 54
eth1: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:a5
eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 456 (level, low) -> CPU 0 (0x0001) vector 55
ACPI: PCI Interrupt 0001:06:01.0[A] -> GSI 456 (level, low) -> IRQ 55
eth2: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:8a
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth2: dma_rwctrl[769f4000] dma_mask[64-bit]
GSI 457 (level, low) -> CPU 0 (0x0001) vector 56
ACPI: PCI Interrupt 0001:06:01.1[B] -> GSI 457 (level, low) -> IRQ 56
eth3: Tigon3 [partno(BCM95704A41) rev 2100 PHY(serdes)] (PCIX:100MHz:64-bit) 1000Base-SX Ethernet 00:0b:5d:6f:02:8b
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
eth3: dma_rwctrl[769f4000] dma_mask[64-bit]
console [netcon0] enabled
netconsole: network logging started
Uniform Multi-Platform E-IDE driver
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide-floppy driver 1.00
Driver 'sd' needs updating - please use bus_type methods
mice: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
Freeing unused kernel memory: 1728kB freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 51
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 51, io base 0x00000d00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 52
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 52, io base 0x00000d20
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 (level, low) -> CPU 0 (0x0001) vector 57
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 57
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 57, io base 0x00000d40
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 51
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 51, io mem 0x85f04000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Fusion MPT base driver 3.04.06
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT SPI Host driver 3.04.06
GSI 432 (level, low) -> CPU 0 (0x0001) vector 58
ACPI: PCI Interrupt 0001:04:01.0[A] -> GSI 432 (level, low) -> IRQ 58
mptbase: ioc0: Initiating bringup
ioc0: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi0 : ioc0: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=58
scsi 0:0:0:0: Direct-Access     FUJITSU  MAN3367MC        5207 PQ: 0 ANSI: 3
 target0:0:0: Beginning Domain Validation
 target0:0:0: Ending Domain Validation
 target0:0:0: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 127)
sd 0:0:0:0: [sda] 71390320 512-byte hardware sectors (36552 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b1 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 71390320 512-byte hardware sectors (36552 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: b1 00 00 08
sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 0:0:0:0: [sda] Attached SCSI disk
scsi 0:0:6:0: Processor         QLogic   GEM359           0204 PQ: 0 ANSI: 2
 target0:0:6: Beginning Domain Validation
 target0:0:6: Ending Domain Validation
 target0:0:6: asynchronous
GSI 433 (level, low) -> CPU 0 (0x0001) vector 59
ACPI: PCI Interrupt 0001:04:01.1[B] -> GSI 433 (level, low) -> IRQ 59
mptbase: ioc1: Initiating bringup
ioc1: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi1 : ioc1: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=59
GSI 480 (level, low) -> CPU 0 (0x0001) vector 60
ACPI: PCI Interrupt 0001:07:01.0[A] -> GSI 480 (level, low) -> IRQ 60
mptbase: ioc2: Initiating bringup
ioc2: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi2 : ioc2: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=60
scsi 2:0:0:0: Direct-Access     FUJITSU  MAT3147NC        3701 PQ: 0 ANSI: 3
 target2:0:0: Beginning Domain Validation
 target2:0:0: Ending Domain Validation
 target2:0:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RTI WRFLOW PCOMP (6.25 ns, offset 127)
sd 2:0:0:0: [sdb] 287132440 512-byte hardware sectors (147012 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: b3 00 00 08
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sd 2:0:0:0: [sdb] 287132440 512-byte hardware sectors (147012 MB)
sd 2:0:0:0: [sdb] Write Protect is off
sd 2:0:0:0: [sdb] Mode Sense: b3 00 00 08
sd 2:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sdb: sdb1
sd 2:0:0:0: [sdb] Attached SCSI disk
scsi 2:0:6:0: Processor         QLogic   GEM359           0204 PQ: 0 ANSI: 2
 target2:0:6: Beginning Domain Validation
 target2:0:6: Ending Domain Validation
 target2:0:6: asynchronous
GSI 481 (level, low) -> CPU 0 (0x0001) vector 61
ACPI: PCI Interrupt 0001:07:01.1[B] -> GSI 481 (level, low) -> IRQ 61
mptbase: ioc3: Initiating bringup
ioc3: LSI53C1030 C0: Capabilities={Initiator,Target}
scsi3 : ioc3: LSI53C1030 C0, FwRev=01032700h, Ports=1, MaxQ=255, IRQ=61
Emulex LightPulse Fibre Channel SCSI driver 8.2.5
Copyright(c) 2004-2008 Emulex.  All rights reserved.
GSI 552 (level, low) -> CPU 0 (0x0001) vector 62
ACPI: PCI Interrupt 0001:0e:01.0[A] -> GSI 552 (level, low) -> IRQ 62
scsi4 :  on PCI bus 0e device 08 irq 62
GSI 576 (level, low) -> CPU 0 (0x0001) vector 63
ACPI: PCI Interrupt 0001:10:01.0[A] -> GSI 576 (level, low) -> IRQ 63
scsi5 :  on PCI bus 10 device 08 irq 63
device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
eepro100.c:v1.09j-t 9/29/99 Donald Becker
eepro100.c: $Revision: 1.36 $ 2000/11/17 Modified by Andrey V. Savochkin <saw@saw.sw.com.sg> and others
GSI 19 (level, low) -> CPU 0 (0x0001) vector 64
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 19 (level, low) -> IRQ 64
eth4: 0000:01:00.0, 00:0b:5d:6e:40:10, IRQ 64.
  Board assembly 1011ff-255, Physical connectors present: RJ45
  Primary interface chip i82555 PHY #1.
  General self-test: passed.
  Serial sub-system self-test: passed.
  Internal registers self-test: passed.
  ROM checksum self-test: passed (0xd0a6c714).
e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
e100: Copyright(c) 1999-2006 Intel Corporation
GSI 20 (level, low) -> CPU 0 (0x0001) vector 65
ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 65
e100: eth5: e100_probe: addr 0x80ffe000, irq 65, MAC addr 00:0b:5d:6e:00:10
BUG: spinlock wrong CPU on CPU#3, udevd/2495
 lock: a040000058246510, .magic: dead4ead, .owner: udevd/2495, .owner_cpu: 2

Call Trace:
 [<a000000100015f00>] show_stack+0x80/0xa0
                                sp=e00001609262fbd0 bsp=e000016092620fd8
 [<a000000100015f50>] dump_stack+0x30/0x60
                                sp=e00001609262fda0 bsp=e000016092620fc0
 [<a0000001004674a0>] spin_bug+0x1a0/0x1c0
                                sp=e00001609262fda0 bsp=e000016092620f90
 [<a000000100467590>] _raw_spin_unlock+0xd0/0x120
                                sp=e00001609262fda0 bsp=e000016092620f60
 [<a00000010082bfe0>] _spin_unlock+0x20/0x40
                                sp=e00001609262fda0 bsp=e000016092620f40
 [<a000000100138100>] do_wp_page+0x500/0xfe0
                                sp=e00001609262fda0 bsp=e000016092620ed8
 [<a00000010013c560>] handle_mm_fault+0xe80/0x10e0
                                sp=e00001609262fda0 bsp=e000016092620e50
 [<a00000010006c140>] ia64_do_page_fault+0x600/0xa40
                                sp=e00001609262fda0 bsp=e000016092620df0
 [<a00000010000abe0>] ia64_leave_kernel+0x0/0x270
                                sp=e00001609262fe30 bsp=e000016092620df0
input: Power Button (FF) as /class/input/input0
ACPI: Power Button (FF) [PWRF]
ACPI: ACPI0007:00 is registered as cooling_device0
ACPI: ACPI0007:01 is registered as cooling_device1
ACPI: ACPI0007:02 is registered as cooling_device2
ACPI: ACPI0007:03 is registered as cooling_device3
ACPI: ACPI0007:04 is registered as cooling_device4
ACPI: ACPI0007:05 is registered as cooling_device5
ACPI: ACPI0007:06 is registered as cooling_device6
ACPI: ACPI0007:07 is registered as cooling_device7
eth3 renamed to __tmp357966323
eth1 renamed to eth3
eth0 renamed to eth1
sd 0:0:0:0: Attached scsi generic sg0 type 0
scsi 0:0:6:0: Attached scsi generic sg1 type 3
sd 2:0:0:0: Attached scsi generic sg2 type 0
scsi 2:0:6:0: Attached scsi generic sg3 type 3
Built 16 zonelists in Node order, mobility grouping on.  Total pages: 121985
Policy zone: Normal
device-mapper: multipath: version 1.0.5 loaded
EXT3 FS on dm-0, internal journal
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sdb1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 2031488k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031488k

[-- Attachment #3: .config --]
[-- Type: application/octet-stream, Size: 36269 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.25-rc5-mm1
# Fri Mar 14 21:39:59 2008
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLOCK_COMPAT=y

#
# IO Schedulers
#
CONFIG_IOSCHED_CFQ=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_NOOP=y
# CONFIG_DEFAULT_CFQ is not set
CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_DEADLINE is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_SWIOTLB=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_GENERIC_IOMAP=y
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
CONFIG_AUDIT_ARCH=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
# CONFIG_PGTABLE_4 is not set
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
# CONFIG_IA64_SGI_SN_XP is not set
CONFIG_FORCE_MAX_ZONEORDER=17
# CONFIG_VIRT_CPU_ACCOUNTING is not set
CONFIG_SMP=y
CONFIG_NR_CPUS=512
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_HAVE_MEMORY_PRESENT=y
# CONFIG_SPARSEMEM_STATIC is not set
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
# CONFIG_MEMORY_HOTPLUG is not set
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_MIGRATION=y
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID=y
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_IA32_SUPPORT=y
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set

#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y

#
# Firmware Drivers
#
CONFIG_EFI_VARS=y
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m

#
# Power management and ACPI
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
CONFIG_ACPI=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
# CONFIG_ACPI_DOCK is not set
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_CUSTOM_DSDT_INITRD is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_CONTAINER=m

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set

#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCIEASPM is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HOTPLUG_PCI=m
# CONFIG_HOTPLUG_PCI_FAKE is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_IP_MROUTE is not set
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_NET_SCHED is not set

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set

#
# Wireless
#
# CONFIG_CFG80211 is not set
# CONFIG_WIRELESS_EXT is not set
# CONFIG_MAC80211 is not set
# CONFIG_IEEE80211 is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=m
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=4
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=m
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=m
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=m
CONFIG_FUSION_MAX_SGE=128
CONFIG_FUSION_CTL=m
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
# CONFIG_NETDEVICES_MULTIQUEUE is not set
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
CONFIG_EEPRO100=m
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=y
# CONFIG_E1000_NAPI is not set
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
CONFIG_E1000E=y
CONFIG_E1000E_ENABLED=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_SK98LIN is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_TIGON3=y
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
# CONFIG_NETCONSOLE_DYNAMIC is not set
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
# CONFIG_NOZOMI is not set
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_IPMI_HANDLER=m
CONFIG_IPMI_PANIC_EVENT=y
# CONFIG_IPMI_PANIC_STRING is not set
CONFIG_IPMI_DEVICE_INTERFACE=m
CONFIG_IPMI_SI=m
CONFIG_IPMI_WATCHDOG=m
CONFIG_IPMI_POWEROFF=m
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
# CONFIG_HPET_RTC_IRQ is not set
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IBMPEX is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set

#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_DRM=m
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set

#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y

#
# Sound
#
CONFIG_SOUND=m

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set

#
# Generic devices
#
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m

#
# PCI devices
#
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_FM801_TEA575X_BOOL is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_AC97_POWER_SAVE is not set

#
# USB devices
#
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_CAIAQ is not set

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# ALSA SoC audio for Freescale SOCs
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
# CONFIG_USB_HIDDEV is not set

#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set

#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_LIBUSUAL is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
CONFIG_USB_MON=y

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_GOTEMP is not set
# CONFIG_USB_GADGET is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_UIO is not set
# CONFIG_MSPEC is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISER4_FS is not set
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_SECURITY is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_AUTOFS_FS=y
CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set

#
# Layered filesystems
#
# CONFIG_UNION_FS is not set

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
CONFIG_NFS_DIRECTIO=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_XPRT_RDMA=m
# CONFIG_SUNRPC_BIND34 is not set
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
# CONFIG_TRACE is not set
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_PER_CPU=y
CONFIG_IOMMU_HELPER=y

#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set

#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
CONFIG_DEBUG_VM=y
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_PROFILE_LIKELY is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_DEBUG_SYNCHRO_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_GRANULE_64MB is not set
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set
CONFIG_SYSVIPC_COMPAT=y

#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_BLKCIPHER=m
# CONFIG_CRYPTO_SEQIV is not set
CONFIG_CRYPTO_MANAGER=m
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_CBC=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_XTS is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_TEST is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_LZO is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe
  2008-03-17  4:25 [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe KOSAKI Motohiro
@ 2008-03-17 13:32 ` KOSAKI Motohiro
  2008-03-18  7:17 ` Andrew Morton
  1 sibling, 0 replies; 4+ messages in thread
From: KOSAKI Motohiro @ 2008-03-17 13:32 UTC (permalink / raw)
  To: linux-ia64, Fenghua Yu, Tony Luck; +Cc: kosaki.motohiro, LKML, Andrew Morton

[-- Attachment #1: Type: text/plain, Size: 1778 bytes --]

Hi

if revert following patch

    [IA64] Multiple outstanding ptc.g instruction support

then this problem doesn't reproduce.

I attached that revert patch.
Thanks!


> Hi
> 
> I found strange message at 2.6.25-rc5-mm1 booting.
> and it is always reproduce.
> 
> and, Eric Piel's spinlock related patch(below URL) can't fixed my problem.
> http://marc.info/?l=linux-kernel&m=120561027011749&w=2
> 
> Is this known bug?
> or should i do bisect?
> 
> -------------------------------------------------------------------
> BUG: spinlock wrong CPU on CPU#3, udevd/2495
>  lock: a040000058246510, .magic: dead4ead, .owner: udevd/2495, .owner_cpu: 2
> 
> Call Trace:
>  [<a000000100015f00>] show_stack+0x80/0xa0
>                                 sp=e00001609262fbd0 bsp=e000016092620fd8
>  [<a000000100015f50>] dump_stack+0x30/0x60
>                                 sp=e00001609262fda0 bsp=e000016092620fc0
>  [<a0000001004674a0>] spin_bug+0x1a0/0x1c0
>                                 sp=e00001609262fda0 bsp=e000016092620f90
>  [<a000000100467590>] _raw_spin_unlock+0xd0/0x120
>                                 sp=e00001609262fda0 bsp=e000016092620f60
>  [<a00000010082bfe0>] _spin_unlock+0x20/0x40
>                                 sp=e00001609262fda0 bsp=e000016092620f40
>  [<a000000100138100>] do_wp_page+0x500/0xfe0
>                                 sp=e00001609262fda0 bsp=e000016092620ed8
>  [<a00000010013c560>] handle_mm_fault+0xe80/0x10e0
>                                 sp=e00001609262fda0 bsp=e000016092620e50
>  [<a00000010006c140>] ia64_do_page_fault+0x600/0xa40
>                                 sp=e00001609262fda0 bsp=e000016092620df0
>  [<a00000010000abe0>] ia64_leave_kernel+0x0/0x270
>                                 sp=e00001609262fe30 bsp=e000016092620df0


[-- Attachment #2: revert-PALO.patch --]
[-- Type: application/octet-stream, Size: 8977 bytes --]

this patch is revert to following patch.

    [IA64] Multiple outstanding ptc.g instruction support
    
that scalability issue fixed patch makes more strong scalability issue.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>


---
 arch/ia64/kernel/efi.c      |   46 --------------------
 arch/ia64/kernel/setup.c    |    6 --
 arch/ia64/mm/tlb.c          |   99 ++++++--------------------------------------
 include/asm-ia64/sal.h      |   17 -------
 include/asm-ia64/tlbflush.h |    1 
 5 files changed, 17 insertions(+), 152 deletions(-)

Index: b/arch/ia64/kernel/efi.c
===================================================================
--- a/arch/ia64/kernel/efi.c	2008-03-14 21:38:10.000000000 +0900
+++ b/arch/ia64/kernel/efi.c	2008-03-17 22:30:49.000000000 +0900
@@ -37,7 +37,6 @@
 #include <asm/pgtable.h>
 #include <asm/processor.h>
 #include <asm/mca.h>
-#include <asm/tlbflush.h>
 
 #define EFI_DEBUG	0
 
@@ -404,41 +403,6 @@ efi_get_pal_addr (void)
 	return NULL;
 }
 
-
-static u8 __init palo_checksum(u8 *buffer, u32 length)
-{
-	u8 sum = 0;
-	u8 *end = buffer + length;
-
-	while (buffer < end)
-		sum = (u8) (sum + *(buffer++));
-
-	return sum;
-}
-
-/*
- * Parse and handle PALO table which is published at:
- * http://www.dig64.org/home/DIG64_PALO_R1_0.pdf
- */
-static void __init handle_palo(unsigned long palo_phys)
-{
-	struct palo_table *palo = __va(palo_phys);
-	u8  checksum;
-
-	if (strncmp(palo->signature, PALO_SIG, sizeof(PALO_SIG) - 1)) {
-		printk(KERN_INFO "PALO signature incorrect.\n");
-		return;
-	}
-
-	checksum = palo_checksum((u8 *)palo, palo->length);
-	if (checksum) {
-		printk(KERN_INFO "PALO checksum incorrect.\n");
-		return;
-	}
-
-	setup_ptcg_sem(palo->max_tlb_purges, 1);
-}
-
 void
 efi_map_pal_code (void)
 {
@@ -468,7 +432,6 @@ efi_init (void)
 	u64 efi_desc_size;
 	char *cp, vendor[100] = "unknown";
 	int i;
-	unsigned long palo_phys;
 
 	/*
 	 * It's too early to be able to use the standard kernel command line
@@ -533,8 +496,6 @@ efi_init (void)
 	efi.hcdp       = EFI_INVALID_TABLE_ADDR;
 	efi.uga        = EFI_INVALID_TABLE_ADDR;
 
-	palo_phys      = EFI_INVALID_TABLE_ADDR;
-
 	for (i = 0; i < (int) efi.systab->nr_tables; i++) {
 		if (efi_guidcmp(config_tables[i].guid, MPS_TABLE_GUID) == 0) {
 			efi.mps = config_tables[i].table;
@@ -554,17 +515,10 @@ efi_init (void)
 		} else if (efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID) == 0) {
 			efi.hcdp = config_tables[i].table;
 			printk(" HCDP=0x%lx", config_tables[i].table);
-		} else if (efi_guidcmp(config_tables[i].guid,
-			 PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID) == 0) {
-			palo_phys = config_tables[i].table;
-			printk(" PALO=0x%lx", config_tables[i].table);
 		}
 	}
 	printk("\n");
 
-	if (palo_phys != EFI_INVALID_TABLE_ADDR)
-		handle_palo(palo_phys);
-
 	runtime = __va(efi.systab->runtime);
 	efi.get_time = phys_get_time;
 	efi.set_time = phys_set_time;
Index: b/arch/ia64/kernel/setup.c
===================================================================
--- a/arch/ia64/kernel/setup.c	2008-03-14 21:38:10.000000000 +0900
+++ b/arch/ia64/kernel/setup.c	2008-03-17 22:30:49.000000000 +0900
@@ -59,7 +59,6 @@
 #include <asm/setup.h>
 #include <asm/smp.h>
 #include <asm/system.h>
-#include <asm/tlbflush.h>
 #include <asm/unistd.h>
 #include <asm/hpsim.h>
 
@@ -947,10 +946,9 @@ cpu_init (void)
 #endif
 
 	/* set ia64_ctx.max_rid to the maximum RID that is supported by all CPUs: */
-	if (ia64_pal_vm_summary(NULL, &vmi) == 0) {
+	if (ia64_pal_vm_summary(NULL, &vmi) == 0)
 		max_ctx = (1U << (vmi.pal_vm_info_2_s.rid_size - 3)) - 1;
-		setup_ptcg_sem(vmi.pal_vm_info_2_s.max_purges, 0);
-	} else {
+	else {
 		printk(KERN_WARNING "cpu_init: PAL VM summary failed, assuming 18 RID bits\n");
 		max_ctx = (1U << 15) - 1;	/* use architected minimum */
 	}
Index: b/arch/ia64/mm/tlb.c
===================================================================
--- a/arch/ia64/mm/tlb.c	2008-03-14 21:38:10.000000000 +0900
+++ b/arch/ia64/mm/tlb.c	2008-03-17 22:30:49.000000000 +0900
@@ -11,9 +11,6 @@
  * Rohit Seth <rohit.seth@intel.com>
  * Ken Chen <kenneth.w.chen@intel.com>
  * Christophe de Dinechin <ddd@hp.com>: Avoid ptc.e on memory allocation
- * Copyright (C) 2007 Intel Corp
- *	Fenghua Yu <fenghua.yu@intel.com>
- *	Add multiple ptc.g/ptc.ga instruction support in global tlb purge.
  */
 #include <linux/module.h>
 #include <linux/init.h>
@@ -29,7 +26,6 @@
 #include <asm/pal.h>
 #include <asm/tlbflush.h>
 #include <asm/dma.h>
-#include <asm/sal.h>
 
 static struct {
 	unsigned long mask;	/* mask of supported purge page-sizes */
@@ -88,77 +84,13 @@ wrap_mmu_context (struct mm_struct *mm)
 	local_flush_tlb_all();
 }
 
-static __DECLARE_SEMAPHORE_GENERIC(ptcg_sem, 1);
-static u16 nptcg = 1;
-static int need_ptcg_sem = 1;
-static int toolatetochangeptcgsem = 0;
-
-/*
- * Maximum number of simultaneous ptc.g purges in the system can
- * be defined by PAL_VM_SUMMARY (in which case we should take
- * the smallest value for any cpu in the system) or by the PAL
- * override table (in which case we should ignore the value from
- * PAL_VM_SUMMARY).
- *
- * Complicating the logic here is the fact that num_possible_cpus()
- * isn't fully setup until we start bringing cpus online.
- */
-void
-setup_ptcg_sem(int max_purges, int from_palo)
-{
-	static int have_palo;
-	static int firstcpu = 1;
-
-	if (toolatetochangeptcgsem) {
-		BUG_ON(max_purges < nptcg);
-		return;
-	}
-
-	if (from_palo) {
-		have_palo = 1;
-
-		/* In PALO max_purges == 0 really means it! */
-		if (max_purges == 0)
-			panic("Whoa! Platform does not support global TLB purges.\n");
-		nptcg = max_purges;
-		if (nptcg == PALO_MAX_TLB_PURGES) {
-			need_ptcg_sem = 0;
-			return;
-		}
-		goto resetsema;
-	}
-	if (have_palo) {
-		if (nptcg != PALO_MAX_TLB_PURGES)
-			need_ptcg_sem = (num_possible_cpus() > nptcg);
-		return;
-	}
-
-	/* In PAL_VM_SUMMARY max_purges == 0 actually means 1 */
-	if (max_purges == 0) max_purges = 1;
-
-	if (firstcpu) {
-		nptcg = max_purges;
-		firstcpu = 0;
-	}
-	if (max_purges < nptcg)
-		nptcg = max_purges;
-	if (nptcg == PAL_MAX_PURGES) {
-		need_ptcg_sem = 0;
-		return;
-	} else
-		need_ptcg_sem = (num_possible_cpus() > nptcg);
-
-resetsema:
-	sema_init(&ptcg_sem, max_purges);
-}
-
 void
 ia64_global_tlb_purge (struct mm_struct *mm, unsigned long start,
 		       unsigned long end, unsigned long nbits)
 {
-	struct mm_struct *active_mm = current->active_mm;
+	static DEFINE_SPINLOCK(ptcg_lock);
 
-	toolatetochangeptcgsem = 1;
+	struct mm_struct *active_mm = current->active_mm;
 
 	if (mm != active_mm) {
 		/* Restore region IDs for mm */
@@ -170,20 +102,19 @@ ia64_global_tlb_purge (struct mm_struct 
 		}
 	}
 
-	if (need_ptcg_sem)
-		down(&ptcg_sem);
-
-	do {
-		/*
-		 * Flush ALAT entries also.
-		 */
-		ia64_ptcga(start, (nbits << 2));
-		ia64_srlz_i();
-		start += (1UL << nbits);
-	} while (start < end);
-
-	if (need_ptcg_sem)
-		up(&ptcg_sem);
+	/* HW requires global serialization of ptc.ga.  */
+	spin_lock(&ptcg_lock);
+	{
+		do {
+			/*
+			 * Flush ALAT entries also.
+			 */
+			ia64_ptcga(start, (nbits<<2));
+			ia64_srlz_i();
+			start += (1UL << nbits);
+		} while (start < end);
+	}
+	spin_unlock(&ptcg_lock);
 
         if (mm != active_mm) {
                 activate_context(active_mm);
Index: b/include/asm-ia64/sal.h
===================================================================
--- a/include/asm-ia64/sal.h	2008-03-14 21:38:13.000000000 +0900
+++ b/include/asm-ia64/sal.h	2008-03-17 22:30:49.000000000 +0900
@@ -296,9 +296,6 @@ enum {
     EFI_GUID(0xe429faf8, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
 #define SAL_PLAT_BUS_ERR_SECT_GUID  \
     EFI_GUID(0xe429faf9, 0x3cb7, 0x11d4, 0xbc, 0xa7, 0x0, 0x80, 0xc7, 0x3c, 0x88, 0x81)
-#define PROCESSOR_ABSTRACTION_LAYER_OVERWRITE_GUID \
-    EFI_GUID(0x6cb0a200, 0x893a, 0x11da, 0x96, 0xd2, 0x0, 0x10, 0x83, 0xff, \
-		0xca, 0x4d)
 
 #define MAX_CACHE_ERRORS	6
 #define MAX_TLB_ERRORS		6
@@ -882,20 +879,6 @@ extern void ia64_jump_to_sal(struct sal_
 
 extern void ia64_sal_handler_init(void *entry_point, void *gpval);
 
-#define PALO_MAX_TLB_PURGES	0xFFFF
-#define PALO_SIG	"PALO"
-
-struct palo_table {
-	u8  signature[4];	/* Should be "PALO" */
-	u32 length;
-	u8  minor_revision;
-	u8  major_revision;
-	u8  checksum;
-	u8  reserved1[5];
-	u16 max_tlb_purges;
-	u8  reserved2[6];
-};
-
 #endif /* __ASSEMBLY__ */
 
 #endif /* _ASM_IA64_SAL_H */
Index: b/include/asm-ia64/tlbflush.h
===================================================================
--- a/include/asm-ia64/tlbflush.h	2008-03-14 21:38:13.000000000 +0900
+++ b/include/asm-ia64/tlbflush.h	2008-03-17 22:30:49.000000000 +0900
@@ -17,7 +17,6 @@
  * Now for some TLB flushing routines.  This is the kind of stuff that
  * can be very expensive, so try to avoid them whenever possible.
  */
-extern void setup_ptcg_sem(int max_purges, int from_palo);
 
 /*
  * Flush everything (kernel mapping may also have changed due to

^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe
  2008-03-17  4:25 [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe KOSAKI Motohiro
  2008-03-17 13:32 ` KOSAKI Motohiro
@ 2008-03-18  7:17 ` Andrew Morton
  2008-03-18  9:46   ` KOSAKI Motohiro
  1 sibling, 1 reply; 4+ messages in thread
From: Andrew Morton @ 2008-03-18  7:17 UTC (permalink / raw)
  To: KOSAKI Motohiro; +Cc: LKML

On Mon, 17 Mar 2008 13:25:26 +0900 KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> wrote:

> Hi
> 
> I found strange message at 2.6.25-rc5-mm1 booting.
> and it is always reproduce.
> 
> 
> and, Eric Piel's spinlock related patch(below URL) can't fixed my problem.
> http://marc.info/?l=linux-kernel&m=120561027011749&w=2
> 
> Is this known bug?
> or should i do bisect?
> 
> 
> 
> -------------------------------------------------------------------
> BUG: spinlock wrong CPU on CPU#3, udevd/2495
>  lock: a040000058246510, .magic: dead4ead, .owner: udevd/2495, .owner_cpu: 2
> 
> Call Trace:
>  [<a000000100015f00>] show_stack+0x80/0xa0
>                                 sp=e00001609262fbd0 bsp=e000016092620fd8
>  [<a000000100015f50>] dump_stack+0x30/0x60
>                                 sp=e00001609262fda0 bsp=e000016092620fc0
>  [<a0000001004674a0>] spin_bug+0x1a0/0x1c0
>                                 sp=e00001609262fda0 bsp=e000016092620f90
>  [<a000000100467590>] _raw_spin_unlock+0xd0/0x120
>                                 sp=e00001609262fda0 bsp=e000016092620f60
>  [<a00000010082bfe0>] _spin_unlock+0x20/0x40
>                                 sp=e00001609262fda0 bsp=e000016092620f40
>  [<a000000100138100>] do_wp_page+0x500/0xfe0
>                                 sp=e00001609262fda0 bsp=e000016092620ed8
>  [<a00000010013c560>] handle_mm_fault+0xe80/0x10e0
>                                 sp=e00001609262fda0 bsp=e000016092620e50
>  [<a00000010006c140>] ia64_do_page_fault+0x600/0xa40
>                                 sp=e00001609262fda0 bsp=e000016092620df0
>  [<a00000010000abe0>] ia64_leave_kernel+0x0/0x270
>                                 sp=e00001609262fe30 bsp=e000016092620df0
> 

I'm unaware of any other reports of anything like this so yes, please do
bisect it if you have the time.


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe
  2008-03-18  7:17 ` Andrew Morton
@ 2008-03-18  9:46   ` KOSAKI Motohiro
  0 siblings, 0 replies; 4+ messages in thread
From: KOSAKI Motohiro @ 2008-03-18  9:46 UTC (permalink / raw)
  To: Andrew Morton; +Cc: kosaki.motohiro, LKML

Hi Andrew

> > Call Trace:
> >  [<a000000100015f00>] show_stack+0x80/0xa0
> >                                 sp=e00001609262fbd0 bsp=e000016092620fd8
> >  [<a000000100015f50>] dump_stack+0x30/0x60
> >                                 sp=e00001609262fda0 bsp=e000016092620fc0
> >  [<a0000001004674a0>] spin_bug+0x1a0/0x1c0
> >                                 sp=e00001609262fda0 bsp=e000016092620f90
> >  [<a000000100467590>] _raw_spin_unlock+0xd0/0x120
> >                                 sp=e00001609262fda0 bsp=e000016092620f60
> >  [<a00000010082bfe0>] _spin_unlock+0x20/0x40
> >                                 sp=e00001609262fda0 bsp=e000016092620f40
> >  [<a000000100138100>] do_wp_page+0x500/0xfe0
> >                                 sp=e00001609262fda0 bsp=e000016092620ed8
> >  [<a00000010013c560>] handle_mm_fault+0xe80/0x10e0
> >                                 sp=e00001609262fda0 bsp=e000016092620e50
> >  [<a00000010006c140>] ia64_do_page_fault+0x600/0xa40
> >                                 sp=e00001609262fda0 bsp=e000016092620df0
> >  [<a00000010000abe0>] ia64_leave_kernel+0x0/0x270
> >                                 sp=e00001609262fe30 bsp=e000016092620df0
> > 
> 
> I'm unaware of any other reports of anything like this so yes, please do
> bisect it if you have the time.

sorry, my report was uncleared.
I already did bisect and found the bug in git-ia64.patch.
and already reported Tony Luck.

that mail is quote following.

> Hi
> 
> if revert following patch
> 
>     [IA64] Multiple outstanding ptc.g instruction support
> 
> then this problem doesn't reproduce.
> 
> I attached that revert patch.
> Thanks!


Thanks.



^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2008-03-18  9:48 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-17  4:25 [2.6.25-rc5-mm1][regression?] BUG: spinlock wrong CPU, modprobe KOSAKI Motohiro
2008-03-17 13:32 ` KOSAKI Motohiro
2008-03-18  7:17 ` Andrew Morton
2008-03-18  9:46   ` KOSAKI Motohiro

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).