LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
@ 2008-03-31 16:23 Didier Raboud
2008-03-31 16:33 ` Rafael J. Wysocki
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-03-31 16:23 UTC (permalink / raw)
To: linux-kernel; +Cc: Rafael J. Wysocki, debian-kernel
[-- Attachment #1.1: Type: text/plain, Size: 733 bytes --]
Hi,
I'm using the latest Debian 2.6.25-rc7 kernel [0] and I have big troubles with
hibernation. With this version, the hibernation (suspend on disk) is
sometimes not resuming correctly. The only thing I get is a blinking cursor
at the top-left of the screen. The problem is that it is not easily
reproducible : sometimes it works, sometimes not.
AFAIK, 2.6.24 is not affected, but 2.6.25-rc6 and -rc7 (at least) are.
I'm using a Dell Latitude D630. (lspci attached).
Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
hibernate/resume cycles.
Regards,
Didier Raboud, aka OdyX
N.B. Please keep me CC'ed as I'm not subscribed to the lists.
[0] http://wiki.debian.org/DebianKernel
[-- Attachment #1.2: d630_lspci --]
[-- Type: text/plain, Size: 2105 bytes --]
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Contoller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
03:01.0 CardBus bridge: O2 Micro, Inc. Cardbus bridge (rev 21)
03:01.4 FireWire (IEEE 1394): O2 Micro, Inc. Firewire (IEEE 1394) (rev 02)
09:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5755M Gigabit Ethernet PCI Express (rev 02)
0c:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
[-- Attachment #1.3: dmesg_hibernateTwice_2.6.25-rc7 --]
[-- Type: text/plain, Size: 63577 bytes --]
0000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC calibrated against PM_TIMER
[ 0.000001] time.c: Detected 2194.499 MHz processor.
[ 0.000022] Console: colour dummy device 80x25
[ 0.000025] console [tty0] enabled
[ 0.000047] Checking aperture...
[ 0.000059] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000060] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.004000] Memory: 2046156k/2087424k available (2205k kernel code, 40880k reserved, 1027k data, 372k init)
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] hpet clockevent registered
[ 0.080007] Calibrating delay using timer specific routine.. 4394.05 BogoMIPS (lpj=8788102)
[ 0.080051] Security Framework initialized
[ 0.080056] SELinux: Disabled at boot.
[ 0.080060] Capability LSM initialized
[ 0.080268] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.081480] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.082099] Mount-cache hash table entries: 256
[ 0.082249] Initializing cgroup subsys ns
[ 0.082253] Initializing cgroup subsys cpuacct
[ 0.082273] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.082274] CPU: L2 cache: 4096K
[ 0.082277] CPU 0/0 -> Node 0
[ 0.082278] CPU: Physical Processor ID: 0
[ 0.082279] CPU: Processor Core ID: 0
[ 0.082286] CPU0: Thermal monitoring enabled (TM2)
[ 0.082288] using mwait in idle threads.
[ 0.083121] ACPI: Core revision 20070126
[ 0.134667] Using local APIC timer interrupts.
[ 0.136009] APIC timer calibration result 12468744
[ 0.136011] Detected 12.468 MHz APIC timer.
[ 0.136165] Booting processor 1/2 APIC 0x1
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 4388.98 BogoMIPS (lpj=8777965)
[ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.004000] CPU: L2 cache: 4096K
[ 0.004000] CPU 1/1 -> Node 0
[ 0.004000] CPU: Physical Processor ID: 0
[ 0.004000] CPU: Processor Core ID: 1
[ 0.004000] CPU1: Thermal monitoring enabled (TM2)
[ 0.004000] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
[ 0.224619] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.228045] Brought up 2 CPUs
[ 0.228133] CPU0 attaching sched-domain:
[ 0.228135] domain 0: span 00000003
[ 0.228137] groups: 00000001 00000002
[ 0.228140] domain 1: span 00000003
[ 0.228141] groups: 00000003
[ 0.228143] CPU1 attaching sched-domain:
[ 0.228145] domain 0: span 00000003
[ 0.228146] groups: 00000002 00000001
[ 0.228148] domain 1: span 00000003
[ 0.228150] groups: 00000003
[ 0.228407] net_namespace: 1016 bytes
[ 0.228411] Booting paravirtualized kernel on bare hardware
[ 0.228588] NET: Registered protocol family 16
[ 0.228765] ACPI: bus type pci registered
[ 0.232540] PCI: Using MMCONFIG at f8000000 - fbffffff
[ 0.232542] PCI: Using configuration type 1
[ 0.240278] ACPI: EC: Look up EC in DSDT
[ 0.262055] ACPI: SSDT 7F690C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
[ 0.262228] ACPI: Interpreter enabled
[ 0.262231] ACPI: (supports S0 S3 S4 S5)
[ 0.262244] ACPI: Using IOAPIC for interrupt routing
[ 0.321140] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.322090] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.322094] pci 0000:00:1f.0: quirk: region 1080-10bf claimed by ICH6 GPIO
[ 0.323117] PCI: Transparent bridge - 0000:00:1e.0
[ 0.323179] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.323792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 0.323999] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.324153] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.324298] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.342911] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.343040] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.343151] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
[ 0.343277] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
[ 0.343404] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 0.343531] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 0.343658] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 0.343771] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.343921] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.343947] pnp: PnP ACPI init
[ 0.343953] ACPI: bus type pnp registered
[ 0.363269] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.363347] pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.363422] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.363495] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.363574] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.363616] 00:05: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173()
[ 0.363660] pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.363735] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.363811] pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.363928] 00:08: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173()
[ 0.363971] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.372994] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.381375] 00:0a: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173()
[ 0.381418] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385228] 00:0b: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173()
[ 0.385277] pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.385320] 00:0c: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173()
[ 0.385367] pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.408235] 00:0d: calling quirk 0xffffffff8035b7de: quirk_system_pci_resources+0x0/0x173()
[ 0.408291] pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.408411] pnp: PnP ACPI: found 14 devices
[ 0.408413] ACPI: ACPI bus type pnp unregistered
[ 0.408565] usbcore: registered new interface driver usbfs
[ 0.408614] usbcore: registered new interface driver hub
[ 0.408648] usbcore: registered new device driver usb
[ 0.408775] PCI: Using ACPI for IRQ routing
[ 0.408777] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.424048] NET: Registered protocol family 8
[ 0.424049] NET: Registered protocol family 20
[ 0.424082] PCI-GART: No AMD northbridge found.
[ 0.424089] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 11
[ 0.424093] hpet0: 3 64-bit timers, 14318180 Hz
[ 0.425127] ACPI: RTC can wake from S4
[ 0.440044] pnp: the driver 'system' has been registered
[ 0.440053] system 00:05: ioport range 0xc80-0xcaf has been reserved
[ 0.440056] system 00:05: ioport range 0xcc0-0xcff could not be reserved
[ 0.440057] system 00:05: driver attached
[ 0.440063] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.440065] system 00:08: driver attached
[ 0.440070] system 00:0a: ioport range 0xcb0-0xcbb has been reserved
[ 0.440073] system 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved
[ 0.440074] system 00:0a: driver attached
[ 0.440079] system 00:0b: ioport range 0x900-0x97f has been reserved
[ 0.440081] system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
[ 0.440084] system 00:0b: ioport range 0x1000-0x1005 has been reserved
[ 0.440086] system 00:0b: ioport range 0x1008-0x100f has been reserved
[ 0.440087] system 00:0b: driver attached
[ 0.440092] system 00:0c: ioport range 0xf400-0xf4fe has been reserved
[ 0.440094] system 00:0c: ioport range 0x1006-0x1007 has been reserved
[ 0.440097] system 00:0c: ioport range 0x100a-0x1059 could not be reserved
[ 0.440099] system 00:0c: ioport range 0x1060-0x107f has been reserved
[ 0.440101] system 00:0c: ioport range 0x1080-0x10bf has been reserved
[ 0.440103] system 00:0c: ioport range 0x10c0-0x10df has been reserved
[ 0.440105] system 00:0c: ioport range 0x1010-0x102f has been reserved
[ 0.440107] system 00:0c: ioport range 0x809-0x809 has been reserved
[ 0.440109] system 00:0c: driver attached
[ 0.440114] system 00:0d: iomem range 0x0-0x9efff could not be reserved
[ 0.440116] system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
[ 0.440118] system 00:0d: iomem range 0xc0000-0xcffff has been reserved
[ 0.440122] system 00:0d: iomem range 0xe0000-0xfffff has been reserved
[ 0.440124] system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved
[ 0.440127] system 00:0d: iomem range 0x7f680400-0x7f6fffff could not be reserved
[ 0.440129] system 00:0d: iomem range 0x7f700000-0x7f7fffff could not be reserved
[ 0.440131] system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved
[ 0.440134] system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
[ 0.440136] system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
[ 0.440139] system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 0.440141] system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 0.440143] system 00:0d: iomem range 0xfed20000-0xfed3ffff could not be reserved
[ 0.440146] system 00:0d: iomem range 0xfed45000-0xfed8ffff could not be reserved
[ 0.440148] system 00:0d: iomem range 0xfeda0000-0xfeda3fff could not be reserved
[ 0.440150] system 00:0d: iomem range 0xfeda4000-0xfeda4fff could not be reserved
[ 0.440153] system 00:0d: iomem range 0xfeda5000-0xfeda5fff could not be reserved
[ 0.440155] system 00:0d: iomem range 0xfeda6000-0xfeda6fff has been reserved
[ 0.440157] system 00:0d: iomem range 0xfed18000-0xfed1bfff could not be reserved
[ 0.440160] system 00:0d: iomem range 0xf8000000-0xfbffffff could not be reserved
[ 0.440161] system 00:0d: driver attached
[ 0.440517] PCI: Bridge: 0000:00:1c.0
[ 0.440518] IO window: disabled.
[ 0.440524] MEM window: disabled.
[ 0.440528] PREFETCH window: disabled.
[ 0.440535] PCI: Bridge: 0000:00:1c.1
[ 0.440536] IO window: disabled.
[ 0.440541] MEM window: 0xfe800000-0xfe8fffff
[ 0.440545] PREFETCH window: disabled.
[ 0.440552] PCI: Bridge: 0000:00:1c.5
[ 0.440553] IO window: disabled.
[ 0.440559] MEM window: 0xfe700000-0xfe7fffff
[ 0.440563] PREFETCH window: disabled.
[ 0.440575] PCI: Bus 4, cardbus bridge: 0000:03:01.0
[ 0.440577] IO window: 0x00002000-0x000020ff
[ 0.440581] IO window: 0x00002400-0x000024ff
[ 0.440586] PREFETCH window: 0x88000000-0x8bffffff
[ 0.440591] MEM window: 0x8c000000-0x8fffffff
[ 0.440596] PCI: Bridge: 0000:00:1e.0
[ 0.440599] IO window: 2000-2fff
[ 0.440604] MEM window: 0xfe600000-0xfe6fffff
[ 0.440608] PREFETCH window: 0x0000000088000000-0x000000008bffffff
[ 0.440639] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 0.440645] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.440668] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.440673] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.440695] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 0.440700] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.440713] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 0.440729] PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
[ 0.440733] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
[ 0.440761] NET: Registered protocol family 2
[ 0.476137] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.476791] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.478355] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.478885] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.478888] TCP reno registered
[ 0.488226] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.504044] Switched to high resolution mode on CPU 0
[ 0.758664] it is
[ 1.046924] Freeing initrd memory: 7523k freed
[ 0.826122] audit: initializing netlink socket (disabled)
[ 0.826141] type=2000 audit(1206978198.048:1): initialized
[ 0.826364] Total HugeTLB memory allocated, 0
[ 0.826457] VFS: Disk quotas dquot_6.5.1
[ 0.826481] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.826563] io scheduler noop registered
[ 0.826564] io scheduler anticipatory registered
[ 0.826566] io scheduler deadline registered
[ 0.826577] io scheduler cfq registered (default)
[ 0.826587] pci 0000:00:02.0: Boot video device
[ 0.826811] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 0.826857] assign_interrupt_mode Found MSI capability
[ 0.826906] Allocate Port Service[0000:00:1c.0:pcie00]
[ 0.826940] Allocate Port Service[0000:00:1c.0:pcie02]
[ 0.826971] Allocate Port Service[0000:00:1c.0:pcie03]
[ 0.827070] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 0.827116] assign_interrupt_mode Found MSI capability
[ 0.827160] Allocate Port Service[0000:00:1c.1:pcie00]
[ 0.827194] Allocate Port Service[0000:00:1c.1:pcie02]
[ 0.827224] Allocate Port Service[0000:00:1c.1:pcie03]
[ 0.827323] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 0.827368] assign_interrupt_mode Found MSI capability
[ 0.827412] Allocate Port Service[0000:00:1c.5:pcie00]
[ 0.827448] Allocate Port Service[0000:00:1c.5:pcie02]
[ 0.827479] Allocate Port Service[0000:00:1c.5:pcie03]
[ 0.828010] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004980000, using 6144k, total 7616k
[ 0.828012] vesafb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.828014] vesafb: scrolling: redraw
[ 0.828016] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.854933] Console: switching to colour frame buffer device 128x48
[ 0.879970] fb0: VESA VGA frame buffer device
[ 0.881953] Real Time Clock Driver v1.12ac
[ 0.882048] hpet_resources: 0xfed00000 is busy
[ 0.882119] Linux agpgart interface v0.103
[ 0.882122] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 0.882271] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.882457] pnp: the driver 'serial' has been registered
[ 0.882680] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.882714] serial 00:09: driver attached
[ 0.882806] isa bounce pool size: 16 pages
[ 0.883436] brd: module loaded
[ 0.883492] input: Macintosh mouse button emulation as /class/input/input0
[ 0.883573] pnp: the driver 'i8042 kbd' has been registered
[ 0.883582] i8042 kbd 00:02: driver attached
[ 0.883609] pnp: the driver 'i8042 aux' has been registered
[ 0.883618] i8042 aux 00:01: driver attached
[ 0.883648] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.886866] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.886871] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.916129] mice: PS/2 mouse device common for all mice
[ 0.916166] cpuidle: using governor ladder
[ 0.916168] cpuidle: using governor menu
[ 0.916475] TCP bic registered
[ 0.916483] NET: Registered protocol family 1
[ 0.916492] NET: Registered protocol family 17
[ 0.916597] registered taskstats version 1
[ 0.916703] Freeing unused kernel memory: 372k freed
[ 0.920167] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1.285700] ACPI: SSDT 7F6810F6, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 1.286034] ACPI: SSDT 7F680BBB, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 1.286571] Monitor-Mwait will be used to enter C-1 state
[ 1.286574] Monitor-Mwait will be used to enter C-2 state
[ 1.286576] Monitor-Mwait will be used to enter C-3 state
[ 1.286701] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1.286739] ACPI: ACPI0007:00 is registered as cooling_device0
[ 1.286742] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 1.287052] ACPI: SSDT 7F68137C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 1.287278] ACPI: SSDT 7F681071, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 1.288091] Marking TSC unstable due to TSC halts in idle
[ 1.063100] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 1.063138] ACPI: ACPI0007:01 is registered as cooling_device1
[ 1.063141] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 1.066103] ACPI: LNXTHERM:01 is registered as thermal_zone0
[ 1.067974] ACPI: Thermal Zone [THM] (55 C)
[ 1.534970] ACPI: ACPI Dock Station Driver
[ 1.554558] USB Universal Host Controller Interface driver v3.0
[ 1.554598] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.554609] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 1.554612] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.554760] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.554793] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
[ 1.554898] usb usb1: configuration #1 chosen from 1 choice
[ 1.554917] hub 1-0:1.0: USB hub found
[ 1.554922] hub 1-0:1.0: 2 ports detected
[ 1.624663] SCSI subsystem initialized
[ 1.635956] libata version 3.00 loaded.
[ 1.656474] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.656477] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.656479] usb usb1: Product: UHCI Host Controller
[ 1.656480] usb usb1: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 1.656482] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.656520] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.656530] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 1.656534] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.656579] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 1.656612] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
[ 1.656705] usb usb2: configuration #1 chosen from 1 choice
[ 1.656724] hub 2-0:1.0: USB hub found
[ 1.656731] hub 2-0:1.0: 2 ports detected
[ 1.760455] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.760460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.760464] usb usb2: Product: UHCI Host Controller
[ 1.760466] usb usb2: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 1.760469] usb usb2: SerialNumber: 0000:00:1a.1
[ 1.760516] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.760528] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 1.760533] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.760591] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.760619] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
[ 1.760704] usb usb3: configuration #1 chosen from 1 choice
[ 1.760723] hub 3-0:1.0: USB hub found
[ 1.760728] hub 3-0:1.0: 2 ports detected
[ 1.864045] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.864050] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.864053] usb usb3: Product: UHCI Host Controller
[ 1.864056] usb usb3: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 1.864059] usb usb3: SerialNumber: 0000:00:1d.0
[ 1.864091] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 1.864101] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 1.864106] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.864168] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[ 1.864202] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
[ 1.864283] usb usb4: configuration #1 chosen from 1 choice
[ 1.864304] hub 4-0:1.0: USB hub found
[ 1.864308] hub 4-0:1.0: 2 ports detected
[ 1.895933] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 1.967695] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.967699] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.967702] usb usb4: Product: UHCI Host Controller
[ 1.967705] usb usb4: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 1.967708] usb usb4: SerialNumber: 0000:00:1d.1
[ 1.967743] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 1.967754] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 1.967758] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.967824] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[ 1.967853] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
[ 1.967937] usb usb5: configuration #1 chosen from 1 choice
[ 1.967955] hub 5-0:1.0: USB hub found
[ 1.967960] hub 5-0:1.0: 2 ports detected
[ 1.995578] Clocksource tsc unstable (delta = -297745226 ns)
[ 2.071101] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.071105] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.071108] usb usb5: Product: UHCI Host Controller
[ 2.071111] usb usb5: Manufacturer: Linux 2.6.25-rc7-amd64 uhci_hcd
[ 2.071114] usb usb5: SerialNumber: 0000:00:1d.2
[ 1.845553] tg3.c:v3.88 (March 20, 2008)
[ 1.845582] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 1.845592] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 2.076029] usb 1-2: configuration #1 chosen from 1 choice
[ 2.079623] usb 1-2: New USB device found, idVendor=413c, idProduct=8140
[ 2.079626] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.866102] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:d6:63:72
[ 1.866105] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
[ 1.866107] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 1.866943] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19
[ 1.867015] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[ 1.867024] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 1.867027] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.867077] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[ 1.870975] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.870982] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 1.870987] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
[ 2.107141] Uniform Multi-Platform E-IDE driver
[ 2.107144] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.890334] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 1.890439] usb usb6: configuration #1 chosen from 1 choice
[ 1.890460] hub 6-0:1.0: USB hub found
[ 1.890466] hub 6-0:1.0: 4 ports detected
[ 1.937266] firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
[ 1.992418] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.992423] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.992427] usb usb6: Product: EHCI Host Controller
[ 1.992429] usb usb6: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd
[ 1.992432] usb usb6: SerialNumber: 0000:00:1a.7
[ 1.992494] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 1.992509] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 1.992512] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.992559] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[ 1.999690] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.999696] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 1.999702] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
[ 2.318693] usb 5-1: new full speed USB device using uhci_hcd and address 2
[ 2.107797] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 2.107941] usb usb7: configuration #1 chosen from 1 choice
[ 2.107979] hub 7-0:1.0: USB hub found
[ 2.107987] hub 7-0:1.0: 6 ports detected
[ 2.210448] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.210453] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.210456] usb usb7: Product: EHCI Host Controller
[ 2.210459] usb usb7: Manufacturer: Linux 2.6.25-rc7-amd64 ehci_hcd
[ 2.210462] usb usb7: SerialNumber: 0000:00:1d.7
[ 2.434060] ahci 0000:00:1f.2: version 3.0
[ 2.434060] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 2.293455] usb 1-2: USB disconnect, address 2
[ 2.655810] firewire_core: created device fw0: GUID 384fc0003b237850, S400
[ 3.428972] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x5 impl SATA mode
[ 3.428977] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 3.428985] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 3.429259] scsi0 : ahci
[ 3.429348] scsi1 : ahci
[ 3.429506] scsi2 : ahci
[ 3.429757] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 1276
[ 3.429759] ata2: DUMMY
[ 3.429761] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 1276
[ 3.379275] usb 1-2: new full speed USB device using uhci_hcd and address 3
[ 3.776981] usb 1-2: configuration #1 chosen from 1 choice
[ 3.780532] usb 1-2: New USB device found, idVendor=413c, idProduct=8140
[ 3.780534] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.692953] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.693897] ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100
[ 3.693901] ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 3.903744] ata1.00: configured for UDMA/100
[ 4.017233] usb 5-1: new full speed USB device using uhci_hcd and address 3
[ 4.165472] usb 5-1: configuration #1 chosen from 1 choice
[ 4.167866] hub 5-1:1.0: USB hub found
[ 4.169814] hub 5-1:1.0: 4 ports detected
[ 4.006623] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.212439] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
[ 4.212440] ICH8M: IDE controller (0x8086:0x2850 rev 0x02) at PCI slot 0000:00:1f.1
[ 4.212440] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 4.212440] ICH8M: not 100% native mode: will probe irqs later
[ 4.212440] ICH8M: IDE port disabled
[ 4.212440] ide0: BM-DMA at 0x6fa0-0x6fa7, BIOS settings: hda:DMA, hdb:PIO
[ 4.212440] Probing IDE interface ide0...
[ 4.221329] Driver 'sd' needs updating - please use bus_type methods
[ 4.225666] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.225689] sd 0:0:0:0: [sda] Write Protect is off
[ 4.225693] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.225727] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.225807] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 4.225819] sd 0:0:0:0: [sda] Write Protect is off
[ 4.225821] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.225841] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.225844] sda:<6>usb 5-1: New USB device found, idVendor=0b97, idProduct=7761
[ 4.276613] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.515768] usb 5-2: new full speed USB device using uhci_hcd and address 4
[ 4.640443] sda1 sda2 < sda5 >
[ 4.440493] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.481112] usb 5-2: configuration #1 chosen from 1 choice
[ 4.484051] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 4.484053] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.484055] usb 5-2: Product: Biometric Coprocessor
[ 4.484057] usb 5-2: Manufacturer: STMicroelectronics
[ 4.690077] usb 5-1.2: new full speed USB device using uhci_hcd and address 5
[ 4.805479] usb 5-1.2: configuration #1 chosen from 1 choice
[ 4.806852] usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772
[ 4.806852] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.806852] usb 5-1.2: Product: O2Micro CCID SC Reader
[ 4.806852] usb 5-1.2: Manufacturer: O2
[ 5.277571] hda: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
[ 5.277599] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 5.278679] hda: UDMA/33 mode selected
[ 5.279227] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 5.294953] hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[ 5.294962] Uniform CD-ROM driver Revision: 3.20
[ 5.282807] device-mapper: uevent: version 1.0.3
[ 5.283144] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com
[ 19.479478] PM: Starting manual resume from disk
[ 19.342472] kjournald starting. Commit interval 5 seconds
[ 19.342489] EXT3-fs: mounted filesystem with ordered data mode.
[ 22.361219] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 22.302608] agpgart: Detected an Intel 965GM Chipset.
[ 22.303537] agpgart: Detected 7676K stolen memory.
[ 22.315734] agpgart: AGP aperture is 256M @ 0xe0000000
[ 22.504624] ACPI: WMI: Mapper loaded
[ 22.530613] ACPI: AC Adapter [AC] (on-line)
[ 22.778371] input: Lid Switch as /class/input/input2
[ 22.812273] ACPI: Lid Switch [LID]
[ 22.812328] input: Power Button (CM) as /class/input/input3
[ 22.646073] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay
[ 22.646077] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler
[ 22.646108] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added
[ 22.646120] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay
[ 22.646124] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler
[ 22.646142] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added
[ 22.875604] ACPI: Power Button (CM) [PBTN]
[ 22.875659] input: Sleep Button (CM) as /class/input/input4
[ 22.937320] ACPI: Sleep Button (CM) [SBTN]
[ 22.775800] ACPI: Battery Slot [BAT0] (battery present)
[ 22.775847] ACPI: Battery Slot [BAT1] (battery absent)
[ 22.795661] input: Video Bus as /class/input/input5
[ 22.851422] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 22.852013] input: Video Bus as /class/input/input6
[ 22.914306] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 22.914452] input: Video Bus as /class/input/input7
[ 22.972002] Bluetooth: Core ver 2.11
[ 22.978303] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 22.987341] NET: Registered protocol family 31
[ 22.987343] Bluetooth: HCI device and connection manager initialized
[ 22.987347] Bluetooth: HCI socket layer initialized
[ 23.017969] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 23.018040] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 23.018077] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 23.202386] Bluetooth: HCI USB driver ver 2.9
[ 23.208339] usbcore: registered new interface driver hci_usb
[ 23.311310] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9]
[ 23.311333] Yenta O2: res at 0x94/0xD4: 00/ea
[ 23.311335] Yenta O2: enabling read prefetch/write burst
[ 23.439955] Yenta: ISA IRQ mask 0x04b8, PCI irq 19
[ 23.439959] Socket status: 30000006
[ 23.439961] Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
[ 23.439966] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff
[ 23.439968] pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
[ 23.439970] pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
[ 23.632922] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
[ 23.613341] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.23ks
[ 23.613344] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 23.613467] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 23.613481] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 23.613500] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 23.676200] iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
[ 23.676667] phy0: Selected rate control algorithm 'iwl-3945-rs'
[ 23.816874] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 24.261624] input: PS/2 Mouse as /class/input/input8
[ 24.297096] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 24.297116] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 24.109311] input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
[ 25.413291] EXT3 FS on dm-6, internal journal
[ 25.763186] loop: module loaded
[ 28.738265] kjournald starting. Commit interval 5 seconds
[ 28.748592] EXT3 FS on sda1, internal journal
[ 28.748592] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.827097] kjournald starting. Commit interval 5 seconds
[ 28.829843] EXT3 FS on dm-4, internal journal
[ 28.829846] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.874167] kjournald starting. Commit interval 5 seconds
[ 28.877006] EXT3 FS on dm-5, internal journal
[ 28.877010] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.921456] kjournald starting. Commit interval 5 seconds
[ 28.924202] EXT3 FS on dm-3, internal journal
[ 28.924204] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.954809] kjournald starting. Commit interval 5 seconds
[ 28.958698] EXT3 FS on dm-2, internal journal
[ 28.958704] EXT3-fs: mounted filesystem with ordered data mode.
[ 28.981242] Adding 6152184k swap on /dev/mapper/Tamino-swap_1. Priority:-1 extents:1 across:6152184k
[ 30.514873] fuse init (API version 7.9)
[ 32.435232] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 32.435378] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106)
[ 33.972769] NET: Registered protocol family 10
[ 33.973216] lo: Disabled Privacy Extensions
[ 33.973588] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.974038] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.410939] wlan0: Initial auth_alg=0
[ 36.410945] wlan0: authenticate with AP 00:18:84:21:ef:2b
[ 36.412647] wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0)
[ 36.412650] wlan0: authenticated
[ 36.412654] wlan0: associate with AP 00:18:84:21:ef:2b
[ 36.283355] wlan0: RX AssocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1)
[ 36.283359] wlan0: associated
[ 36.283407] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
[ 36.283411] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 36.283415] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 36.283419] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 36.283791] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.378878] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
[ 36.512003] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 36.379028] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 36.512193] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 38.070490] Bluetooth: L2CAP ver 2.9
[ 38.070494] Bluetooth: L2CAP socket layer initialized
[ 37.981386] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 38.329811] Bluetooth: RFCOMM socket layer initialized
[ 38.329820] Bluetooth: RFCOMM TTY layer initialized
[ 38.329822] Bluetooth: RFCOMM ver 1.8
[ 43.102835] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 46.278610] pnp: the driver 'parport_pc' has been registered
[ 46.278946] lp: driver loaded but no devices found
[ 46.392346] ppdev: user-space parallel port driver
[ 46.698214] wlan0: no IPv6 routers present
[ 50.457312] [drm] Initialized drm 1.1.0 20060810
[ 50.494946] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 50.494953] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 50.495044] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 104.258195] CPU0 attaching NULL sched-domain.
[ 104.258208] CPU1 attaching NULL sched-domain.
[ 104.273951] CPU0 attaching sched-domain:
[ 104.273964] domain 0: span 00000003
[ 104.273969] groups: 00000001 00000002
[ 104.273977] domain 1: span 00000003
[ 104.273981] groups: 00000003
[ 104.273987] CPU1 attaching sched-domain:
[ 104.273991] domain 0: span 00000003
[ 104.273995] groups: 00000002 00000001
[ 104.274002] domain 1: span 00000003
[ 104.274005] groups: 00000003
[ 121.494863] Syncing filesystems ... done.
[ 121.494915] Freezing user space processes ... (elapsed 0.00 seconds) done.
[ 121.495516] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 121.495614] PM: Shrinking memory... \b-\bdone (0 pages freed)
[ 121.514672] PM: Freed 0 kbytes in 0.04 seconds (0.00 MB/s)
[ 121.516965] ACPI: Preparing to enter system sleep state S4
[ 121.518827] Suspending console(s)
[ 121.518831] drm_sysfs_suspend
[ 121.521511] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 122.128192] serial 00:09: disabled
[ 122.128250] ACPI handle has no context!
[ 122.201724] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 122.246086] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 122.246121] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 122.246155] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 122.246189] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 122.262067] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 122.277875] ACPI: PCI interrupt for device 0000:00:1a.7 disabled
[ 122.277918] ACPI: PCI interrupt for device 0000:00:1a.1 disabled
[ 122.277961] ACPI: PCI interrupt for device 0000:00:1a.0 disabled
[ 122.278058] Disabling non-boot CPUs ...
[ 122.278072] CPU0 attaching NULL sched-domain.
[ 122.278074] CPU1 attaching NULL sched-domain.
[ 122.012363] CPU 1 is now offline
[ 122.012366] SMP alternatives: switching to UP code
[ 122.013615] CPU0 attaching sched-domain:
[ 122.013618] domain 0: span 00000001
[ 122.013619] groups: 00000001
[ 122.013793] CPU1 is down
[ 122.013916] Extended CMOS year: 2000
[ 122.014012] PM: Creating hibernation image:
[ 122.016358] PM: Need to copy 160268 pages
[ 122.016358] Extended CMOS year: 2000
[ 122.016358] Enabling non-boot CPUs ...
[ 122.016358] CPU0 attaching NULL sched-domain.
[ 122.024471] SMP alternatives: switching to SMP code
[ 122.025385] Booting processor 1/2 APIC 0x1
[ 122.292156] Initializing CPU#1
[ 122.293794] Calibrating delay using timer specific routine.. 4386.86 BogoMIPS (lpj=8773722)
[ 122.293794] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 122.293794] CPU: L2 cache: 4096K
[ 122.293794] CPU 1/1 -> Node 0
[ 122.293794] CPU: Physical Processor ID: 0
[ 122.293794] CPU: Processor Core ID: 1
[ 122.293794] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
[ 122.116979] CPU0 attaching sched-domain:
[ 122.116981] domain 0: span 00000003
[ 122.116983] groups: 00000001 00000002
[ 122.116985] domain 1: span 00000003
[ 122.116987] groups: 00000003
[ 122.116989] CPU1 attaching sched-domain:
[ 122.116990] domain 0: span 00000003
[ 122.116991] groups: 00000002 00000001
[ 122.116993] domain 1: span 00000003
[ 122.116995] groups: 00000003
[ 122.293794] CPU1 is up
[ 122.293800] Switched to high resolution mode on CPU 1
[ 122.166900] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Bay event
[ 122.355095] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 122.355100] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 122.355120] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 122.355125] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 122.355177] usb usb1: root hub lost power or was reset
[ 122.355199] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 122.355204] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 122.355272] usb usb2: root hub lost power or was reset
[ 122.355294] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[ 122.355299] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 122.355351] usb usb6: root hub lost power or was reset
[ 122.359236] ehci_hcd 0000:00:1a.7: debug port 1
[ 122.359242] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 122.372946] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
[ 122.372976] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 122.372985] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 122.497784] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 122.497860] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 122.497940] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 122.497948] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 122.497953] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 122.498004] usb usb3: root hub lost power or was reset
[ 122.498022] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 122.498027] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 122.498078] usb usb4: root hub lost power or was reset
[ 122.498096] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 122.498101] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 122.498152] usb usb5: root hub lost power or was reset
[ 122.498174] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 122.498183] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 122.498250] usb usb7: root hub lost power or was reset
[ 122.502131] ehci_hcd 0000:00:1d.7: debug port 1
[ 122.502137] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 122.502162] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20040300, writing 20070300)
[ 122.502190] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 122.502270] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 122.502315] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
[ 122.502360] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 122.516838] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 122.529126] PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing dfad0000)
[ 122.529154] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100106, writing 100506)
[ 122.590977] PM: Writing back config space on device 0000:03:01.0 at offset f (was 14001ff, writing 5c001ff)
[ 122.591004] PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 824000, writing 82a800)
[ 122.591011] PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 4100007, writing 4100087)
[ 122.591036] Yenta O2: res at 0x94/0xD4: 00/ea
[ 122.591037] Yenta O2: enabling read prefetch/write burst
[ 122.745779] PM: Writing back config space on device 0000:03:01.4 at offset f (was 100, writing 103)
[ 122.745803] PM: Writing back config space on device 0000:03:01.4 at offset 5 (was 0, writing fe6fe800)
[ 122.745810] PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing fe6ff000)
[ 122.745817] PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 0, writing 4010)
[ 122.745825] PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100080, writing 2180117)
[ 122.619021] ata3: SATA link down (SStatus 0 SControl 300)
[ 122.830640] pnp: Res cnt 2
[ 122.838113] pnp: res cnt 2
[ 122.838114] pnp: Encode irq
[ 122.838115] pnp: Encode io
[ 122.845289] serial 00:09: activated
[ 122.782508] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 122.784550] ata1.00: configured for UDMA/100
[ 122.798554] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 122.798576] sd 0:0:0:0: [sda] Write Protect is off
[ 122.798579] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 122.798612] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 124.442501] sd 0:0:0:0: [sda] Starting disk
[ 124.467524] do_drive_get_GTF: Run _GTF error: status = 0x5
[ 124.467524] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 124.468158] hda: UDMA/33 mode selected
[ 124.510014] Restarting tasks ... <6>usb 1-2: USB disconnect, address 3
[ 124.524315] done.
[ 124.651641] usb 5-1: USB disconnect, address 3
[ 124.651646] usb 5-1.2: USB disconnect, address 5
[ 124.779585] usb 5-2: USB disconnect, address 4
[ 125.862319] usb 1-2: new full speed USB device using uhci_hcd and address 4
[ 126.050633] usb 1-2: configuration #1 chosen from 1 choice
[ 126.311979] usb 1-2: New USB device found, idVendor=413c, idProduct=8140
[ 126.311984] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 126.549536] usb 5-1: new full speed USB device using uhci_hcd and address 6
[ 126.455994] usb 5-1: configuration #1 chosen from 1 choice
[ 126.458016] hub 5-1:1.0: USB hub found
[ 126.459912] hub 5-1:1.0: 4 ports detected
[ 126.569858] usb 5-1: New USB device found, idVendor=0b97, idProduct=7761
[ 126.569868] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 126.808228] usb 5-2: new full speed USB device using uhci_hcd and address 7
[ 126.982550] usb 5-2: configuration #1 chosen from 1 choice
[ 126.982728] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 126.982728] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 126.982728] usb 5-2: Product: Biometric Coprocessor
[ 126.982728] usb 5-2: Manufacturer: STMicroelectronics
[ 127.188237] usb 5-1.2: new full speed USB device using uhci_hcd and address 8
[ 127.301244] usb 5-1.2: configuration #1 chosen from 1 choice
[ 127.301449] usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772
[ 127.301449] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 127.301449] usb 5-1.2: Product: O2Micro CCID SC Reader
[ 127.301449] usb 5-1.2: Manufacturer: O2
[ 131.137161] wlan0: Initial auth_alg=0
[ 131.137179] wlan0: authenticate with AP 00:0c:41:9d:64:c2
[ 131.414772] wlan0: Initial auth_alg=0
[ 131.414786] wlan0: authenticate with AP 00:0c:41:9d:64:c2
[ 131.414821] wlan0: RX authentication from 00:0c:41:9d:64:c2 (alg=0 transaction=2 status=0)
[ 131.414827] wlan0: authenticated
[ 131.414833] wlan0: associate with AP 00:0c:41:9d:64:c2
[ 131.416313] wlan0: authentication frame received from 00:0c:41:9d:64:c2, but not in authenticate state - ignored
[ 131.418260] wlan0: authentication frame received from 00:0c:41:9d:64:c2, but not in authenticate state - ignored
[ 131.145365] wlan0: RX ReassocResp from 00:0c:41:9d:64:c2 (capab=0x411 status=0 aid=2)
[ 131.145374] wlan0: associated
[ 214.688933] Syncing filesystems ... done.
[ 214.688933] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 214.700037] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
[ 214.700128] PM: Shrinking memory... \b-\bdone (0 pages freed)
[ 214.719065] PM: Freed 0 kbytes in 0.04 seconds (0.00 MB/s)
[ 214.721413] ACPI: Preparing to enter system sleep state S4
[ 214.723227] Suspending console(s)
[ 214.724834] drm_sysfs_suspend
[ 214.724935] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 214.872565] serial 00:09: disabled
[ 214.872622] ACPI handle has no context!
[ 214.943325] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 214.987782] ACPI: PCI interrupt for device 0000:00:1d.7 disabled
[ 214.987817] ACPI: PCI interrupt for device 0000:00:1d.2 disabled
[ 214.987851] ACPI: PCI interrupt for device 0000:00:1d.1 disabled
[ 214.987885] ACPI: PCI interrupt for device 0000:00:1d.0 disabled
[ 215.003591] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[ 215.019405] ACPI: PCI interrupt for device 0000:00:1a.7 disabled
[ 215.019449] ACPI: PCI interrupt for device 0000:00:1a.1 disabled
[ 215.019492] ACPI: PCI interrupt for device 0000:00:1a.0 disabled
[ 215.019603] Disabling non-boot CPUs ...
[ 215.019612] CPU0 attaching NULL sched-domain.
[ 215.019614] CPU1 attaching NULL sched-domain.
[ 215.047340] CPU 1 is now offline
[ 215.047342] SMP alternatives: switching to UP code
[ 215.048557] CPU0 attaching sched-domain:
[ 215.048559] domain 0: span 00000001
[ 215.048561] groups: 00000001
[ 215.048741] CPU1 is down
[ 215.048865] Extended CMOS year: 2000
[ 215.048961] PM: Creating hibernation image:
[ 215.051329] PM: Need to copy 160501 pages
[ 215.051329] Extended CMOS year: 2000
[ 215.051329] Enabling non-boot CPUs ...
[ 215.051329] CPU0 attaching NULL sched-domain.
[ 215.059443] SMP alternatives: switching to SMP code
[ 215.060356] Booting processor 1/2 APIC 0x1
[ 216.467233] Initializing CPU#1
[ 216.467233] Calibrating delay using timer specific routine.. 4389.04 BogoMIPS (lpj=8778096)
[ 216.467233] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 216.467233] CPU: L2 cache: 4096K
[ 216.467233] CPU 1/1 -> Node 0
[ 216.467233] CPU: Physical Processor ID: 0
[ 216.467233] CPU: Processor Core ID: 1
[ 216.467233] Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
[ 215.152000] CPU0 attaching sched-domain:
[ 215.152003] domain 0: span 00000003
[ 215.152004] groups: 00000001 00000002
[ 215.152007] domain 1: span 00000003
[ 215.152008] groups: 00000003
[ 215.152010] CPU1 attaching sched-domain:
[ 215.152011] domain 0: span 00000003
[ 215.152013] groups: 00000002 00000001
[ 215.152015] domain 1: span 00000003
[ 215.152016] groups: 00000003
[ 216.467233] CPU1 is up
[ 216.467239] Switched to high resolution mode on CPU 1
[ 215.168991] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Bay event
[ 216.529391] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 216.529396] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 216.529416] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 216.529420] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 216.529472] usb usb1: root hub lost power or was reset
[ 216.529493] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 216.529498] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 216.529567] usb usb2: root hub lost power or was reset
[ 216.529588] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
[ 216.529593] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 216.529646] usb usb6: root hub lost power or was reset
[ 216.533523] ehci_hcd 0000:00:1a.7: debug port 1
[ 216.533529] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 216.546428] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
[ 216.546457] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
[ 216.546467] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 216.671014] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 216.671090] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 216.671165] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 216.671173] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
[ 216.671179] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 216.671230] usb usb3: root hub lost power or was reset
[ 216.671248] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
[ 216.671253] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 216.671305] usb usb4: root hub lost power or was reset
[ 216.671322] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
[ 216.671328] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 216.671379] usb usb5: root hub lost power or was reset
[ 216.671410] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
[ 216.671418] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 216.671472] usb usb7: root hub lost power or was reset
[ 216.675344] ehci_hcd 0000:00:1d.7: debug port 1
[ 216.675350] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 216.675375] PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20040300, writing 20070300)
[ 216.675404] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 216.675484] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 216.675529] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
[ 216.675573] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 216.690100] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 216.702399] PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing dbad0000)
[ 216.702427] PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100106, writing 100506)
[ 216.764196] PM: Writing back config space on device 0000:03:01.0 at offset f (was 14001ff, writing 5c001ff)
[ 216.764223] PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 824000, writing 82a800)
[ 216.764230] PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 4100007, writing 4100087)
[ 216.764254] Yenta O2: res at 0x94/0xD4: 00/ea
[ 216.764255] Yenta O2: enabling read prefetch/write burst
[ 216.920027] PM: Writing back config space on device 0000:03:01.4 at offset f (was 100, writing 103)
[ 216.920051] PM: Writing back config space on device 0000:03:01.4 at offset 5 (was 0, writing fe6fe800)
[ 216.920058] PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing fe6ff000)
[ 216.920065] PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 0, writing 4010)
[ 216.920073] PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100080, writing 2180117)
[ 215.653740] ata3: SATA link down (SStatus 0 SControl 300)
[ 217.003977] pnp: Res cnt 2
[ 217.011383] pnp: res cnt 2
[ 217.011384] pnp: Encode irq
[ 217.011385] pnp: Encode io
[ 217.018625] serial 00:09: activated
[ 215.816401] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 215.818443] ata1.00: configured for UDMA/100
[ 215.832446] sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 215.832468] sd 0:0:0:0: [sda] Write Protect is off
[ 215.832471] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 215.832504] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 217.480507] sd 0:0:0:0: [sda] Starting disk
[ 218.212824] do_drive_get_GTF: Run _GTF error: status = 0x5
[ 218.213712] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
[ 218.214529] hda: UDMA/33 mode selected
[ 218.256455] Restarting tasks ... <6>usb 1-2: USB disconnect, address 4
[ 218.269961] done.
[ 218.397075] usb 5-1: USB disconnect, address 6
[ 218.397079] usb 5-1.2: USB disconnect, address 8
[ 218.525014] usb 5-2: USB disconnect, address 7
[ 219.615552] usb 5-1: new full speed USB device using uhci_hcd and address 9
[ 219.767000] usb 5-1: configuration #1 chosen from 1 choice
[ 219.767173] hub 5-1:1.0: USB hub found
[ 219.768617] hub 5-1:1.0: 4 ports detected
[ 219.875599] usb 5-1: New USB device found, idVendor=0b97, idProduct=7761
[ 219.875610] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 220.114410] usb 5-2: new full speed USB device using uhci_hcd and address 10
[ 220.283517] usb 5-2: configuration #1 chosen from 1 choice
[ 220.283784] usb 5-2: New USB device found, idVendor=0483, idProduct=2016
[ 220.283784] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 220.283784] usb 5-2: Product: Biometric Coprocessor
[ 220.283784] usb 5-2: Manufacturer: STMicroelectronics
[ 220.519549] usb 1-2: new full speed USB device using uhci_hcd and address 5
[ 220.702401] usb 1-2: configuration #1 chosen from 1 choice
[ 220.706157] usb 1-2: New USB device found, idVendor=413c, idProduct=8140
[ 220.706169] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 220.911570] usb 5-1.2: new full speed USB device using uhci_hcd and address 11
[ 221.028870] usb 5-1.2: configuration #1 chosen from 1 choice
[ 221.029102] usb 5-1.2: New USB device found, idVendor=0b97, idProduct=7772
[ 221.029102] usb 5-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 221.029102] usb 5-1.2: Product: O2Micro CCID SC Reader
[ 221.029102] usb 5-1.2: Manufacturer: O2
[ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183245] wlan0: deauthenticated
[ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183245] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: RX deauthentication from 00:0c:41:9d:64:c2 (reason=7)
[ 224.183246] wlan0: authenticate with AP 00:0c:41:9d:64:c2
[ 224.187164] wlan0: RX authentication from 00:0c:41:9d:64:c2 (alg=0 transaction=2 status=0)
[ 224.187173] wlan0: authenticated
[ 224.187179] wlan0: associate with AP 00:0c:41:9d:64:c2
[ 224.191265] wlan0: RX ReassocResp from 00:0c:41:9d:64:c2 (capab=0x411 status=0 aid=2)
[ 224.191273] wlan0: associated
[ 225.648612] wlan0: Initial auth_alg=0
[ 225.648627] wlan0: authenticate with AP 00:18:84:21:ef:2b
[ 225.651138] wlan0: Initial auth_alg=0
[ 225.651152] wlan0: authenticate with AP 00:18:84:21:ef:2b
[ 225.651186] wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0)
[ 225.651191] wlan0: authenticated
[ 225.651197] wlan0: associate with AP 00:18:84:21:ef:2b
[ 225.653431] wlan0: authentication frame received from 00:18:84:21:ef:2b, but not in authenticate state - ignored
[ 225.657286] wlan0: Initial auth_alg=0
[ 225.657298] wlan0: authenticate with AP 00:18:84:21:ef:2b
[ 225.657328] wlan0: association frame received from 00:18:84:21:ef:2b, but not in associate state - ignored
[ 225.659210] wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0)
[ 225.659219] wlan0: authenticated
[ 225.659225] wlan0: associate with AP 00:18:84:21:ef:2b
[ 225.664308] wlan0: RX ReassocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1)
[ 225.664320] wlan0: associated
[ 225.664400] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
[ 225.664407] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 225.664414] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 225.664420] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 225.687616] wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
[ 225.687616] wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
[ 225.687616] wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
[ 225.687616] wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[ 224.807692] ACPI: PCI interrupt for device 0000:0c:00.0 disabled
[ 226.484082] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 226.484260] PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100102, writing 100106)
[ 226.547091] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 234.300158] wlan0: disassociate(reason=3)
[ 238.546500] wlan0: Initial auth_alg=0
[ 238.546514] wlan0: authenticate with AP 00:0f:cc:b4:4e:14
[ 236.844757] wlan0: Initial auth_alg=0
[ 236.844757] wlan0: authenticate with AP 00:0f:cc:b4:4e:14
[ 238.549303] wlan0: RX authentication from 00:0f:cc:b4:4e:14 (alg=0 transaction=2 status=0)
[ 238.549313] wlan0: authenticated
[ 238.549319] wlan0: associate with AP 00:0f:cc:b4:4e:14
[ 238.554791] wlan0: RX AssocResp from 00:0f:cc:b4:4e:14 (capab=0x451 status=0 aid=1)
[ 238.554803] wlan0: associated
[ 238.554813] wlan0: switched to long barker preamble (BSSID=00:0f:cc:b4:4e:14)
[ 238.555608] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[-- Attachment #1.4: dmesg_hibernateTwice_2.6.24 --]
[-- Type: text/plain, Size: 43896 bytes --]
Initializing cgroup subsys cpuset
Linux version 2.6.24-1-amd64 (Debian 2.6.24-5) (waldi@debian.org) (gcc version 4.1.3 20080308 (prerelease) (Debian 4.1.2-21)) #1 SMP Thu Mar 27 16:52:38 UTC 2008
Command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.24-1-amd64 root=/dev/mapper/Tamino-Root ro quiet vga=792
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f680400 (usable)
BIOS-e820: 000000007f680400 - 0000000080000000 (reserved)
BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed18000 - 00000000fed1c000 (reserved)
BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000feda0000 - 00000000feda6000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 521856) 1 entries of 3200 used
end_pfn_map = 1048576
DMI 2.4 present.
ACPI: RSDP 000FBB00, 0024 (r2 DELL )
ACPI: XSDT 7F681E00, 0064 (r1 DELL M08 27D70512 ASL 61)
ACPI: FACP 7F681C9C, 00F4 (r4 DELL M08 27D70512 ASL 61)
ACPI: DSDT 7F682400, 6122 (r2 INT430 SYSFexxx 1001 INTL 20050624)
ACPI: FACS 7F690C00, 0040
ACPI: HPET 7F681F00, 0038 (r1 DELL M08 1 ASL 61)
ACPI: APIC 7F682000, 0068 (r1 DELL M08 27D70512 ASL 47)
ACPI: ASF! 7F681C00, 007E (r32 DELL M08 27D70512 ASL 61)
ACPI: MCFG 7F681FC0, 003E (r16 DELL M08 27D70512 ASL 61)
ACPI: SLIC 7F68209C, 0176 (r1 DELL M08 27D70512 ASL 61)
ACPI: TCPA 7F682300, 0032 (r1 0 ASL 0)
ACPI: SSDT 7F6806EF, 04CC (r1 PmRef CpuPm 3000 INTL 20050624)
No NUMA configuration found
Faking a node at 0000000000000000-000000007f680000
Entering add_active_range(0, 0, 159) 0 entries of 3200 used
Entering add_active_range(0, 256, 521856) 1 entries of 3200 used
Bootmem setup node 0 0000000000000000-000000007f680000
No mptable found.
Zone PFN ranges:
DMA 0 -> 4096
DMA32 4096 -> 1048576
Normal 1048576 -> 1048576
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0 -> 159
0: 256 -> 521856
On node 0 totalpages: 521759
DMA zone: 56 pages used for memmap
DMA zone: 1064 pages reserved
DMA zone: 2879 pages, LIFO batch:0
DMA32 zone: 7078 pages used for memmap
DMA32 zone: 510682 pages, LIFO batch:31
Normal zone: 0 pages used for memmap
Movable zone: 0 pages used for memmap
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 (Bootup-CPU)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to flat
ACPI: HPET id: 0x8086a201 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 0000000000100000
Allocating PCI resources starting at 88000000 (gap: 80000000:78000000)
SMP: Allowing 2 CPUs, 0 hotplug CPUs
PERCPU: Allocating 34400 bytes of per cpu data
Built 1 zonelists in Node order, mobility grouping on. Total pages: 513561
Policy zone: DMA32
Kernel command line: BOOT_IMAGE=(hd0,1)/vmlinuz-2.6.24-1-amd64 root=/dev/mapper/Tamino-Root ro quiet vga=792
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Extended CMOS year: 2000
hpet clockevent registered
TSC calibrated against HPET
time.c: Detected 2194.496 MHz processor.
Console: colour dummy device 80x25
console [tty0] enabled
Checking aperture...
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 2046628k/2087424k available (2143k kernel code, 40408k reserved, 1003k data, 316k init)
Calibrating delay using timer specific routine.. 4393.98 BogoMIPS (lpj=8787961)
Security Framework initialized
SELinux: Disabled at boot.
Capability LSM initialized
Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 0/0 -> Node 0
using mwait in idle threads.
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
CPU0: Thermal monitoring enabled (TM2)
SMP alternatives: switching to UP code
ACPI: Core revision 20070126
Using local APIC timer interrupts.
APIC timer calibration result 12468728
Detected 12.468 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4400.45 BogoMIPS (lpj=8800918)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
CPU1: Thermal monitoring enabled (TM2)
Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
net_namespace: 120 bytes
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using MMCONFIG at f8000000 - fbffffff
ACPI: EC: Look up EC in DSDT
ACPI: SSDT 7F690C80, 0043 (r1 LMPWR DELLLOM 1001 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
PCI quirk: region 1080-10bf claimed by ICH6 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
pnpacpi: exceeded the max number of mem resources: 12
pnp 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NET: Registered protocol family 8
NET: Registered protocol family 20
PCI-GART: No AMD northbridge found.
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 64-bit timers, 14318180 Hz
ACPI: RTC can wake from S4
Time: tsc clocksource has been installed.
pnp: the driver 'system' has been registered
system 00:05: ioport range 0xc80-0xcaf has been reserved
system 00:05: ioport range 0xcc0-0xcff could not be reserved
system 00:05: driver attached
system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
system 00:08: driver attached
system 00:0a: ioport range 0xcb0-0xcbb has been reserved
system 00:0a: iomem range 0xfed40000-0xfed44fff could not be reserved
system 00:0a: driver attached
system 00:0b: ioport range 0x900-0x97f has been reserved
system 00:0b: ioport range 0x4d0-0x4d1 has been reserved
system 00:0b: ioport range 0x1000-0x1005 has been reserved
system 00:0b: ioport range 0x1008-0x100f has been reserved
system 00:0b: driver attached
system 00:0c: ioport range 0xf400-0xf4fe has been reserved
system 00:0c: ioport range 0x1006-0x1007 has been reserved
system 00:0c: ioport range 0x100a-0x1059 could not be reserved
system 00:0c: ioport range 0x1060-0x107f has been reserved
system 00:0c: ioport range 0x1080-0x10bf has been reserved
system 00:0c: ioport range 0x10c0-0x10df has been reserved
system 00:0c: ioport range 0x1010-0x102f has been reserved
system 00:0c: ioport range 0x809-0x809 has been reserved
system 00:0c: driver attached
system 00:0d: iomem range 0x0-0x9efff could not be reserved
system 00:0d: iomem range 0x9f000-0x9ffff could not be reserved
system 00:0d: iomem range 0xc0000-0xcffff has been reserved
system 00:0d: iomem range 0xe0000-0xfffff has been reserved
system 00:0d: iomem range 0x100000-0x7f6803ff could not be reserved
system 00:0d: iomem range 0x7f680400-0x7f6fffff could not be reserved
system 00:0d: iomem range 0x7f700000-0x7f7fffff could not be reserved
system 00:0d: iomem range 0x7f700000-0x7fefffff could not be reserved
system 00:0d: iomem range 0xffe00000-0xffffffff could not be reserved
system 00:0d: iomem range 0xffa00000-0xffbfffff has been reserved
system 00:0d: iomem range 0xfec00000-0xfec0ffff could not be reserved
system 00:0d: iomem range 0xfee00000-0xfee0ffff could not be reserved
system 00:0d: driver attached
PCI: Bridge: 0000:00:1c.0
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.1
IO window: disabled.
MEM window: fe800000-fe8fffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:1c.5
IO window: disabled.
MEM window: fe700000-fe7fffff
PREFETCH window: disabled.
PCI: Bus 4, cardbus bridge: 0000:03:01.0
IO window: 00001400-000014ff
IO window: 00001800-000018ff
PREFETCH window: 88000000-8bffffff
MEM window: 8c000000-8fffffff
PCI: Bridge: 0000:00:1e.0
IO window: disabled.
MEM window: fe600000-fe6fffff
PREFETCH window: disabled.
ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1c.0 to 64
ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.1 to 64
ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1c.5 to 64
PCI: Setting latency timer of device 0000:00:1e.0 to 64
PCI: Enabling device 0000:03:01.0 (0000 -> 0003)
ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
NET: Registered protocol family 2
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
checking if image is initramfs... it is
Freeing initrd memory: 7401k freed
audit: initializing netlink socket (disabled)
audit(1206977597.084:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:00:02.0
PCI: Setting latency timer of device 0000:00:1c.0 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.0:pcie00]
Allocate Port Service[0000:00:1c.0:pcie02]
Allocate Port Service[0000:00:1c.0:pcie03]
PCI: Setting latency timer of device 0000:00:1c.1 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.1:pcie00]
Allocate Port Service[0000:00:1c.1:pcie02]
Allocate Port Service[0000:00:1c.1:pcie03]
PCI: Setting latency timer of device 0000:00:1c.5 to 64
assign_interrupt_mode Found MSI capability
Allocate Port Service[0000:00:1c.5:pcie00]
Allocate Port Service[0000:00:1c.5:pcie02]
Allocate Port Service[0000:00:1c.5:pcie03]
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc20004980000, using 6144k, total 7616k
vesafb: mode is 1024x768x32, linelength=4096, pages=1
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Linux agpgart interface v0.102
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
pnp: the driver 'serial' has been registered
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial 00:09: driver attached
RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
input: Macintosh mouse button emulation as /class/input/input0
pnp: the driver 'i8042 kbd' has been registered
i8042 kbd 00:02: driver attached
pnp: the driver 'i8042 aux' has been registered
i8042 aux 00:01: driver attached
PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
registered taskstats version 1
Freeing unused kernel memory: 316k freed
input: AT Translated Set 2 keyboard as /class/input/input1
ACPI: SSDT 7F6810F6, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
ACPI: SSDT 7F680BBB, 04B6 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: SSDT 7F68137C, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
ACPI: SSDT 7F681071, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
Marking TSC unstable due to TSC halts in idle
ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU1] (supports 8 throttling states)
Time: hpet clocksource has been installed.
ACPI: Thermal Zone [THM] (57 C)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb 1-2: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
Clocksource tsc unstable (delta = -301309212 ns)
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
usb 1-2: configuration #1 chosen from 1 choice
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000
usb 5-1: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb7: configuration #1 chosen from 1 choice
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, low) -> IRQ 19
firewire_ohci: Added fw-ohci device 0000:03:01.4, OHCI version 1.10
tg3.c:v3.86 (November 9, 2007)
ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:09:00.0 to 64
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
pnp: the driver 'ide' has been registered
usb 1-2: USB disconnect, address 2
eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI Express) 10/100/1000Base-T Ethernet 00:18:8b:d6:63:72
eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
eth0: dma_rwctrl[76180000] dma_mask[64-bit]
ahci 0000:00:1f.2: version 3.0
ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports
ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
firewire_core: created new fw device fw0 (0 config rom retries, S400)
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
PCI: Setting latency timer of device 0000:00:1f.2 to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 1276
ata2: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb980 irq 1276
ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 1276
usb 1-2: new full speed USB device using uhci_hcd and address 3
usb 1-2: configuration #1 chosen from 1 choice
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-7: Hitachi HTS541612J9SA00, SBDOC74P, max UDMA/100
ata1.00: 234441648 sectors, multi 8: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/100
usb 5-1: new full speed USB device using uhci_hcd and address 3
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
ata2: SATA link down (SStatus 0 SControl 0)
usb 5-2: new full speed USB device using uhci_hcd and address 4
ata3: SATA link down (SStatus 0 SControl 300)
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54161 SBDO PQ: 0 ANSI: 5
ICH8M: IDE controller (0x8086:0x2850 rev 0x02) at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
ICH8M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x6fa0-0x6fa7, BIOS settings: hda:DMA, hdb:pio
ICH8M: IDE port disabled
Probing IDE interface ide0...
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda:<6>usb 5-2: configuration #1 chosen from 1 choice
usb 5-1.2: new full speed USB device using uhci_hcd and address 5
usb 5-1.2: configuration #1 chosen from 1 choice
sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
hda: HL-DT-ST DVD+/-RW GSA-T11N, ATAPI CD/DVD-ROM drive
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: dm-devel@redhat.com
Attempting manual resume
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting. Commit interval 5 seconds
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Battery Slot [BAT1] (battery absent)
agpgart: Detected an Intel 965GM Chipset.
agpgart: Detected 7676K stolen memory.
agpgart: AGP aperture is 256M @ 0xe0000000
input: Lid Switch as /class/input/input2
ACPI: Lid Switch [LID]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PBTN]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SBTN]
input: Video Bus as /class/input/input5
ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input6
ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
input: Video Bus as /class/input/input7
ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
ACPI: AC Adapter [AC] (on-line)
Bluetooth: Core ver 2.11
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.9
usbcore: registered new interface driver hci_usb
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
Yenta: CardBus bridge found at 0000:03:01.0 [1028:01f9]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0cb8, PCI irq 19
Socket status: 30000006
Yenta: Raising subordinate bus# of parent bus (#03) from #04 to #07
pcmcia: parent PCI bridge Memory window: 0xfe600000 - 0xfe6fffff
iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.1.17ks
iwl3945: Copyright(c) 2003-2007 Intel Corporation
ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:0c:00.0 to 64
iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
input: PS/2 Mouse as /class/input/input8
iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
phy0: Selected rate control algorithm 'iwl-3945-rs'
input: AlpsPS/2 ALPS GlidePoint as /class/input/input9
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
EXT3 FS on dm-6, internal journal
loop: module loaded
dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-4, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on dm-2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 6152184k swap on /dev/mapper/Tamino-swap_1. Priority:-1 extents:1 across:6152184k
fuse init (API version 7.9)
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ADDRCONF(NETDEV_UP): eth0: link is not ready
ADDRCONF(NETDEV_UP): wlan0: link is not ready
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:18:84:21:ef:2b
wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:18:84:21:ef:2b
wlan0: RX AssocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: switched to short barker preamble (BSSID=00:18:84:21:ef:2b)
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
Bluetooth: L2CAP ver 2.9
Bluetooth: L2CAP socket layer initialized
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
pnp: the driver 'parport_pc' has been registered
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
wlan0: no IPv6 routers present
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
[drm] Initialized i915 1.6.0 20060119 on minor 0
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Shrinking memory... \b-\bdone (0 pages freed)
Freed 0 kbytes in 0.07 seconds (0.00 MB/s)
Suspending console(s)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
serial 00:09: disabled
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI interrupt for device 0000:00:1a.7 disabled
ACPI: PCI interrupt for device 0000:00:1a.1 disabled
ACPI: PCI interrupt for device 0000:00:1a.0 disabled
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
swsusp: critical section:
swsusp: Need to copy 165823 pages
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4388.80 BogoMIPS (lpj=8777608)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
CPU1 is up
Switched to high resolution mode on CPU 1
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
usb usb6: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb5: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb7: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20040300, writing 20070300)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
PCI: Setting latency timer of device 0000:00:1f.2 to 64
Coming out of suspend...
PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100106, writing 100506)
PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing dfa50000)
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100106, writing 100506)
PM: Writing back config space on device 0000:03:01.0 at offset f (was 14001ff, writing 5c001ff)
PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 824000, writing 82a800)
PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 4100007, writing 4100087)
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 0)
PM: Writing back config space on device 0000:03:01.4 at offset f (was 100, writing 103)
PM: Writing back config space on device 0000:03:01.4 at offset 5 (was 0, writing fe6fe800)
PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing fe6ff000)
PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100080, writing 2180117)
i8042 aux 00:01: activation not supported
i8042 kbd 00:02: activation not supported
pnp: Res cnt 2
pnp: res cnt 2
pnp: Encode irq
pnp: Encode io
serial 00:09: activated
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Starting disk
do_drive_get_GTF: Run _GTF error: status = 0x5
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Restarting tasks ... <6>usb 1-2: USB disconnect, address 3
done.
swsusp: Basic memory bitmaps freed
usb 5-1: USB disconnect, address 3
usb 5-1.2: USB disconnect, address 5
usb 5-2: USB disconnect, address 4
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 5-1: new full speed USB device using uhci_hcd and address 6
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 5-2: new full speed USB device using uhci_hcd and address 7
usb 5-2: configuration #1 chosen from 1 choice
usb 5-1.2: new full speed USB device using uhci_hcd and address 8
usb 5-1.2: configuration #1 chosen from 1 choice
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:18:84:21:ef:2b
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:18:84:21:ef:2b
wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:18:84:21:ef:2b
wlan0: RX ReassocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
Syncing filesystems ... done.
Freezing user space processes ... (elapsed 0.00 seconds) done.
Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done.
Shrinking memory... \b-\bdone (0 pages freed)
Freed 0 kbytes in 0.07 seconds (0.00 MB/s)
Suspending console(s)
sd 0:0:0:0: [sda] Synchronizing SCSI cache
serial 00:09: disabled
ACPI handle has no context!
ACPI: PCI interrupt for device 0000:00:1d.7 disabled
ACPI: PCI interrupt for device 0000:00:1d.2 disabled
ACPI: PCI interrupt for device 0000:00:1d.1 disabled
ACPI: PCI interrupt for device 0000:00:1d.0 disabled
ACPI: PCI interrupt for device 0000:00:1b.0 disabled
ACPI: PCI interrupt for device 0000:00:1a.7 disabled
ACPI: PCI interrupt for device 0000:00:1a.1 disabled
ACPI: PCI interrupt for device 0000:00:1a.0 disabled
Disabling non-boot CPUs ...
CPU 1 is now offline
SMP alternatives: switching to UP code
CPU1 is down
Extended CMOS year: 2000
swsusp: critical section:
swsusp: Need to copy 166144 pages
Extended CMOS year: 2000
Enabling non-boot CPUs ...
SMP alternatives: switching to SMP code
Booting processor 1/2 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 4388.78 BogoMIPS (lpj=8777570)
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 4096K
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0a
CPU1 is up
Switched to high resolution mode on CPU 1
ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:02.0 to 64
ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1a.0 to 64
usb usb1: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1a.1 to 64
usb usb2: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1a.7 to 64
usb usb6: root hub lost power or was reset
ehci_hcd 0000:00:1a.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1a.7
PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100106, writing 100102)
ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1b.0 to 64
PCI: Setting latency timer of device 0000:00:1c.0 to 64
PCI: Setting latency timer of device 0000:00:1c.1 to 64
PCI: Setting latency timer of device 0000:00:1c.5 to 64
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.0 to 64
usb usb3: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1d.1 to 64
usb usb4: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
PCI: Setting latency timer of device 0000:00:1d.2 to 64
usb usb5: root hub lost power or was reset
ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
usb usb7: root hub lost power or was reset
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 32 is not supported by device 0000:00:1d.7
PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 8bf18801, writing 1fff1)
PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was a2802020, writing a28000f0)
PM: Writing back config space on device 0000:00:1e.0 at offset 6 (was 20040300, writing 20070300)
PCI: Setting latency timer of device 0000:00:1e.0 to 64
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00403, writing 2b00407)
PCI: Setting latency timer of device 0000:00:1f.2 to 64
Coming out of suspend...
PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100106, writing 100506)
PM: Writing back config space on device 0000:09:00.0 at offset c (was 0, writing dfa50000)
PM: Writing back config space on device 0000:09:00.0 at offset 1 (was 100106, writing 100506)
PM: Writing back config space on device 0000:03:01.0 at offset f (was 14001ff, writing 5c001ff)
PM: Writing back config space on device 0000:03:01.0 at offset e (was 24fd, writing 18fd)
PM: Writing back config space on device 0000:03:01.0 at offset d (was 2401, writing 1801)
PM: Writing back config space on device 0000:03:01.0 at offset c (was 20fd, writing 14fd)
PM: Writing back config space on device 0000:03:01.0 at offset b (was 2001, writing 1401)
PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 824000, writing 82a800)
PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 4100007, writing 4100087)
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
ata3: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 0)
PM: Writing back config space on device 0000:03:01.4 at offset f (was 100, writing 103)
PM: Writing back config space on device 0000:03:01.4 at offset 5 (was 0, writing fe6fe800)
PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing fe6ff000)
PM: Writing back config space on device 0000:03:01.4 at offset 3 (was 0, writing 4010)
PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100080, writing 2180117)
i8042 aux 00:01: activation not supported
i8042 kbd 00:02: activation not supported
pnp: Res cnt 2
pnp: res cnt 2
pnp: Encode irq
pnp: Encode io
serial 00:09: activated
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: configured for UDMA/100
sd 0:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Starting disk
do_drive_get_GTF: Run _GTF error: status = 0x5
hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
hda: UDMA/33 mode selected
Restarting tasks ... <6>usb 1-2: USB disconnect, address 4
done.
swsusp: Basic memory bitmaps freed
usb 5-1: USB disconnect, address 6
usb 5-1.2: USB disconnect, address 8
usb 5-2: USB disconnect, address 7
usb 5-1: new full speed USB device using uhci_hcd and address 9
usb 5-1: configuration #1 chosen from 1 choice
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 4 ports detected
usb 5-2: new full speed USB device using uhci_hcd and address 10
usb 5-2: configuration #1 chosen from 1 choice
usb 1-2: new full speed USB device using uhci_hcd and address 5
usb 1-2: configuration #1 chosen from 1 choice
usb 5-1.2: new full speed USB device using uhci_hcd and address 11
usb 5-1.2: configuration #1 chosen from 1 choice
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:18:84:21:ef:2b
wlan0: Initial auth_alg=0
wlan0: authenticate with AP 00:18:84:21:ef:2b
wlan0: RX authentication from 00:18:84:21:ef:2b (alg=0 transaction=2 status=0)
wlan0: authenticated
wlan0: associate with AP 00:18:84:21:ef:2b
wlan0: authentication frame received from 00:18:84:21:ef:2b, but not in authenticate state - ignored
wlan0: RX ReassocResp from 00:18:84:21:ef:2b (capab=0x431 status=0 aid=1)
wlan0: associated
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
wlan0: WMM queue=2 aci=0 acm=0 aifs=2 cWmin=7 cWmax=1023 burst=20
wlan0: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
wlan0: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
wlan0: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 16:23 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630 Didier Raboud
@ 2008-03-31 16:33 ` Rafael J. Wysocki
2008-03-31 17:03 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Rafael J. Wysocki @ 2008-03-31 16:33 UTC (permalink / raw)
To: Didier Raboud; +Cc: linux-kernel, debian-kernel
On Monday, 31 of March 2008, Didier Raboud wrote:
> Hi,
Hi,
> I'm using the latest Debian 2.6.25-rc7 kernel [0] and I have big troubles with
> hibernation. With this version, the hibernation (suspend on disk) is
> sometimes not resuming correctly. The only thing I get is a blinking cursor
> at the top-left of the screen. The problem is that it is not easily
> reproducible : sometimes it works, sometimes not.
>
> AFAIK, 2.6.24 is not affected, but 2.6.25-rc6 and -rc7 (at least) are.
>
> I'm using a Dell Latitude D630. (lspci attached).
>
> Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> hibernate/resume cycles.
Could you please check if the problem is still present if you boot with
acpi_new_pts_ordering kernel command line argument?
Thanks,
Rafael
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 16:33 ` Rafael J. Wysocki
@ 2008-03-31 17:03 ` Didier Raboud
2008-03-31 17:24 ` maximilian attems
2008-04-01 19:38 ` 2.6.25-rc7 Pavel Machek
0 siblings, 2 replies; 19+ messages in thread
From: Didier Raboud @ 2008-03-31 17:03 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 1177 bytes --]
Le lundi, 31 mars 2008 18.33:19 Rafael J. Wysocki, vous avez écrit :
> On Monday, 31 of March 2008, Didier Raboud wrote:
> > Hi,
>
> Hi,
>
> > I'm using the latest Debian 2.6.25-rc7 kernel [0] and I have big troubles
> > with hibernation. With this version, the hibernation (suspend on disk) is
> > sometimes not resuming correctly. The only thing I get is a blinking
> > cursor at the top-left of the screen. The problem is that it is not
> > easily reproducible : sometimes it works, sometimes not.
> >
> > AFAIK, 2.6.24 is not affected, but 2.6.25-rc6 and -rc7 (at least) are.
> >
> > I'm using a Dell Latitude D630. (lspci attached).
> >
> > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> > hibernate/resume cycles.
>
> Could you please check if the problem is still present if you boot with
> acpi_new_pts_ordering kernel command line argument?
>
> Thanks,
> Rafael
Hi.
It did not help. I had to test 4 hibernation/resume cycles to see the resume
fail.
By the way, I just added acp_new_pts_ordering at the end of the Grub line
beginning by "linux (hd0,1)/vmlinuz(...)". Is that correct ?
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 17:03 ` Didier Raboud
@ 2008-03-31 17:24 ` maximilian attems
2008-03-31 17:36 ` Didier Raboud
2008-04-01 19:38 ` 2.6.25-rc7 Pavel Machek
1 sibling, 1 reply; 19+ messages in thread
From: maximilian attems @ 2008-03-31 17:24 UTC (permalink / raw)
To: Didier Raboud; +Cc: Rafael J. Wysocki, linux-kernel, debian-kernel
On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
<snipp>
> > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> > > hibernate/resume cycles.
> >
> > Could you please check if the problem is still present if you boot with
> > acpi_new_pts_ordering kernel command line argument?
>
> By the way, I just added acp_new_pts_ordering at the end of the Grub line
> beginning by "linux (hd0,1)/vmlinuz(...)". Is that correct ?
seems strange you should add it to the kopt line and then kick as root
update-grub
# kopt=root=/dev/sda1 ro
it should land
kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 17:24 ` maximilian attems
@ 2008-03-31 17:36 ` Didier Raboud
2008-03-31 18:22 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-03-31 17:36 UTC (permalink / raw)
To: linux-kernel; +Cc: Rafael J. Wysocki, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 934 bytes --]
Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> <snipp>
>
> > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> > > > hibernate/resume cycles.
> > >
> > > Could you please check if the problem is still present if you boot with
> > > acpi_new_pts_ordering kernel command line argument?
> >
> > By the way, I just added acp_new_pts_ordering at the end of the Grub line
> > beginning by "linux (hd0,1)/vmlinuz(...)". Is that correct ?
>
> seems strange you should add it to the kopt line and then kick as root
> update-grub
>
> # kopt=root=/dev/sda1 ro
> it should land
> kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
Well... I'm using Grub2 (grub-pc). I altered the boot option at boot time but
forgot to check /proc/cmdline. Will try again and report back.
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 17:36 ` Didier Raboud
@ 2008-03-31 18:22 ` Didier Raboud
2008-03-31 20:29 ` Rafael J. Wysocki
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-03-31 18:22 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 1218 bytes --]
Le lundi, 31 mars 2008 19.36:00 Didier Raboud, vous avez écrit :
> Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> > On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> > <snipp>
> >
> > > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> > > > > hibernate/resume cycles.
> > > >
> > > > Could you please check if the problem is still present if you boot
> > > > with acpi_new_pts_ordering kernel command line argument?
> > >
> > > By the way, I just added acp_new_pts_ordering at the end of the Grub
> > > line beginning by "linux (hd0,1)/vmlinuz(...)". Is that correct ?
> >
> > seems strange you should add it to the kopt line and then kick as root
> > update-grub
> >
> > # kopt=root=/dev/sda1 ro
> > it should land
> > kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
>
> Well... I'm using Grub2 (grub-pc). I altered the boot option at boot time
> but forgot to check /proc/cmdline. Will try again and report back.
>
> Regards,
>
> Didier
Hi,
I tried again and ensured that /proc/cmdline 's end was
acpi_new_pts_ordering . It did work for 2-3 hibernation, but then failed.
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 18:22 ` Didier Raboud
@ 2008-03-31 20:29 ` Rafael J. Wysocki
2008-03-31 21:03 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Rafael J. Wysocki @ 2008-03-31 20:29 UTC (permalink / raw)
To: Didier Raboud; +Cc: linux-kernel, debian-kernel
On Monday, 31 of March 2008, Didier Raboud wrote:
> Le lundi, 31 mars 2008 19.36:00 Didier Raboud, vous avez écrit :
> > Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> > > On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> > > <snipp>
> > >
> > > > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> > > > > > hibernate/resume cycles.
> > > > >
> > > > > Could you please check if the problem is still present if you boot
> > > > > with acpi_new_pts_ordering kernel command line argument?
> > > >
> > > > By the way, I just added acp_new_pts_ordering at the end of the Grub
> > > > line beginning by "linux (hd0,1)/vmlinuz(...)". Is that correct ?
> > >
> > > seems strange you should add it to the kopt line and then kick as root
> > > update-grub
> > >
> > > # kopt=root=/dev/sda1 ro
> > > it should land
> > > kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
> >
> > Well... I'm using Grub2 (grub-pc). I altered the boot option at boot time
> > but forgot to check /proc/cmdline. Will try again and report back.
> >
> > Regards,
> >
> > Didier
>
> Hi,
>
> I tried again and ensured that /proc/cmdline 's end was
> acpi_new_pts_ordering . It did work for 2-3 hibernation, but then failed.
Well, there were quite a lot of suspend-related changes between 2.6.24 and
now.
Hmm, do you have CONFIG_USB_SUSPEND set in .config by chance?
Rafael
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 20:29 ` Rafael J. Wysocki
@ 2008-03-31 21:03 ` Didier Raboud
2008-04-01 6:18 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-03-31 21:03 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 1708 bytes --]
Le lundi, 31 mars 2008 22.29:20 Rafael J. Wysocki, vous avez écrit :
> On Monday, 31 of March 2008, Didier Raboud wrote:
> > Le lundi, 31 mars 2008 19.36:00 Didier Raboud, vous avez écrit :
> > > Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> > > > On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> > > > <snipp>
> > > >
> > > > > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two
> > > > > > > successful hibernate/resume cycles.
> > > > > >
> > > > > > Could you please check if the problem is still present if you
> > > > > > boot with acpi_new_pts_ordering kernel command line argument?
> > > > >
> > > > > By the way, I just added acp_new_pts_ordering at the end of the
> > > > > Grub line beginning by "linux (hd0,1)/vmlinuz(...)". Is that
> > > > > correct ?
> > > >
> > > > seems strange you should add it to the kopt line and then kick as
> > > > root update-grub
> > > >
> > > > # kopt=root=/dev/sda1 ro
> > > > it should land
> > > > kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
> > >
> > > Well... I'm using Grub2 (grub-pc). I altered the boot option at boot
> > > time but forgot to check /proc/cmdline. Will try again and report back.
> > >
> > > Regards,
> > >
> > > Didier
> >
> > Hi,
> >
> > I tried again and ensured that /proc/cmdline 's end was
> > acpi_new_pts_ordering . It did work for 2-3 hibernation, but then failed.
>
> Well, there were quite a lot of suspend-related changes between 2.6.24 and
> now.
>
> Hmm, do you have CONFIG_USB_SUSPEND set in .config by chance?
>
> Rafael
I do (Debian default option)... I will build a kernel without it and retry.
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-03-31 21:03 ` Didier Raboud
@ 2008-04-01 6:18 ` Didier Raboud
2008-04-01 6:41 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-04-01 6:18 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 2044 bytes --]
Le lundi, 31 mars 2008 23.03:16 Didier Raboud, vous avez écrit :
> Le lundi, 31 mars 2008 22.29:20 Rafael J. Wysocki, vous avez écrit :
> > On Monday, 31 of March 2008, Didier Raboud wrote:
> > > Le lundi, 31 mars 2008 19.36:00 Didier Raboud, vous avez écrit :
> > > > Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> > > > > On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> > > > > <snipp>
> > > > >
> > > > > > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two
> > > > > > > > successful hibernate/resume cycles.
> > > > > > >
> > > > > > > Could you please check if the problem is still present if you
> > > > > > > boot with acpi_new_pts_ordering kernel command line argument?
> > > > > >
> > > > > > By the way, I just added acp_new_pts_ordering at the end of the
> > > > > > Grub line beginning by "linux (hd0,1)/vmlinuz(...)". Is that
> > > > > > correct ?
> > > > >
> > > > > seems strange you should add it to the kopt line and then kick as
> > > > > root update-grub
> > > > >
> > > > > # kopt=root=/dev/sda1 ro
> > > > > it should land
> > > > > kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
> > > >
> > > > Well... I'm using Grub2 (grub-pc). I altered the boot option at boot
> > > > time but forgot to check /proc/cmdline. Will try again and report
> > > > back.
> > > >
> > > > Regards,
> > > >
> > > > Didier
> > >
> > > Hi,
> > >
> > > I tried again and ensured that /proc/cmdline 's end was
> > > acpi_new_pts_ordering . It did work for 2-3 hibernation, but then
> > > failed.
> >
> > Well, there were quite a lot of suspend-related changes between 2.6.24
> > and now.
> >
> > Hmm, do you have CONFIG_USB_SUSPEND set in .config by chance?
> >
> > Rafael
>
> I do (Debian default option)... I will build a kernel without it and retry.
>
> Didier
Hi again.
I compiled the same kernel with CONFIG_USB_SUSPEND not set. After 6
hibernations, I haven't had a problem for now.
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-01 6:18 ` Didier Raboud
@ 2008-04-01 6:41 ` Didier Raboud
2008-04-01 19:37 ` 2.6.25-rc7 Pavel Machek
2008-04-01 21:11 ` 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630 Rafael J. Wysocki
0 siblings, 2 replies; 19+ messages in thread
From: Didier Raboud @ 2008-04-01 6:41 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 2668 bytes --]
Le mardi, 1 avril 2008 08.18:57 Didier Raboud, vous avez écrit :
> Le lundi, 31 mars 2008 23.03:16 Didier Raboud, vous avez écrit :
> > Le lundi, 31 mars 2008 22.29:20 Rafael J. Wysocki, vous avez écrit :
> > > On Monday, 31 of March 2008, Didier Raboud wrote:
> > > > Le lundi, 31 mars 2008 19.36:00 Didier Raboud, vous avez écrit :
> > > > > Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> > > > > > On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> > > > > > <snipp>
> > > > > >
> > > > > > > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two
> > > > > > > > > successful hibernate/resume cycles.
> > > > > > > >
> > > > > > > > Could you please check if the problem is still present if you
> > > > > > > > boot with acpi_new_pts_ordering kernel command line argument?
> > > > > > >
> > > > > > > By the way, I just added acp_new_pts_ordering at the end of the
> > > > > > > Grub line beginning by "linux (hd0,1)/vmlinuz(...)". Is that
> > > > > > > correct ?
> > > > > >
> > > > > > seems strange you should add it to the kopt line and then kick as
> > > > > > root update-grub
> > > > > >
> > > > > > # kopt=root=/dev/sda1 ro
> > > > > > it should land
> > > > > > kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
> > > > >
> > > > > Well... I'm using Grub2 (grub-pc). I altered the boot option at
> > > > > boot time but forgot to check /proc/cmdline. Will try again and
> > > > > report back.
> > > > >
> > > > > Regards,
> > > > >
> > > > > Didier
> > > >
> > > > Hi,
> > > >
> > > > I tried again and ensured that /proc/cmdline 's end was
> > > > acpi_new_pts_ordering . It did work for 2-3 hibernation, but then
> > > > failed.
> > >
> > > Well, there were quite a lot of suspend-related changes between 2.6.24
> > > and now.
> > >
> > > Hmm, do you have CONFIG_USB_SUSPEND set in .config by chance?
> > >
> > > Rafael
> >
> > I do (Debian default option)... I will build a kernel without it and
> > retry.
> >
> > Didier
>
> Hi again.
>
> I compiled the same kernel with CONFIG_USB_SUSPEND not set. After 6
> hibernations, I haven't had a problem for now.
>
> Regards,
>
> Didier
Hi again again,
It hung after the 10th hibernation...
I wonder if the problem would not be of Debian's uswsusp binary, because tty1
tells me that the image is successfully loaded but I just can't act on my box
afterwards.
There is a bug open in the Debian BTS requesting a packaging of the new
upstream version (0.8) but the maintainer is told to be too busy to handle it
for now.
Don't know...
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7
2008-04-01 6:41 ` Didier Raboud
@ 2008-04-01 19:37 ` Pavel Machek
2008-04-01 21:11 ` 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630 Rafael J. Wysocki
1 sibling, 0 replies; 19+ messages in thread
From: Pavel Machek @ 2008-04-01 19:37 UTC (permalink / raw)
To: Didier Raboud; +Cc: Rafael J. Wysocki, linux-kernel, debian-kernel
Hi!
> > > I do (Debian default option)... I will build a kernel without it and
> > > retry.
> >
> > I compiled the same kernel with CONFIG_USB_SUSPEND not set. After 6
> > hibernations, I haven't had a problem for now.
> >
> It hung after the 10th hibernation...
>
> I wonder if the problem would not be of Debian's uswsusp binary, because tty1
> tells me that the image is successfully loaded but I just can't act on my box
> afterwards.
>
> There is a bug open in the Debian BTS requesting a packaging of the new
> upstream version (0.8) but the maintainer is told to be too busy to handle it
> for now.
>
> Don't know...
Just do echo disk > /sys/power/state to use swsusp and bypass uswsusp?
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7
2008-03-31 17:03 ` Didier Raboud
2008-03-31 17:24 ` maximilian attems
@ 2008-04-01 19:38 ` Pavel Machek
1 sibling, 0 replies; 19+ messages in thread
From: Pavel Machek @ 2008-04-01 19:38 UTC (permalink / raw)
To: Didier Raboud; +Cc: Rafael J. Wysocki, linux-kernel, debian-kernel
> > > with hibernation. With this version, the hibernation (suspend on disk) is
> > > sometimes not resuming correctly. The only thing I get is a blinking
> > > cursor at the top-left of the screen. The problem is that it is not
> > > easily reproducible : sometimes it works, sometimes not.
> > >
> > > AFAIK, 2.6.24 is not affected, but 2.6.25-rc6 and -rc7 (at least) are.
> > >
> > > I'm using a Dell Latitude D630. (lspci attached).
> > >
> > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two successful
> > > hibernate/resume cycles.
> >
> > Could you please check if the problem is still present if you boot with
> > acpi_new_pts_ordering kernel command line argument?
>
> It did not help. I had to test 4 hibernation/resume cycles to see the resume
> fail.
Try to unload modules before suspend/reload them after resume?
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-01 6:41 ` Didier Raboud
2008-04-01 19:37 ` 2.6.25-rc7 Pavel Machek
@ 2008-04-01 21:11 ` Rafael J. Wysocki
2008-04-01 21:18 ` Didier Raboud
1 sibling, 1 reply; 19+ messages in thread
From: Rafael J. Wysocki @ 2008-04-01 21:11 UTC (permalink / raw)
To: Didier Raboud; +Cc: linux-kernel, debian-kernel
On Tuesday, 1 of April 2008, Didier Raboud wrote:
> Le mardi, 1 avril 2008 08.18:57 Didier Raboud, vous avez écrit :
> > Le lundi, 31 mars 2008 23.03:16 Didier Raboud, vous avez écrit :
> > > Le lundi, 31 mars 2008 22.29:20 Rafael J. Wysocki, vous avez écrit :
> > > > On Monday, 31 of March 2008, Didier Raboud wrote:
> > > > > Le lundi, 31 mars 2008 19.36:00 Didier Raboud, vous avez écrit :
> > > > > > Le lundi, 31 mars 2008 19.24:55 maximilian attems, vous avez écrit :
> > > > > > > On Mon, Mar 31, 2008 at 07:03:13PM +0200, Didier Raboud wrote:
> > > > > > > <snipp>
> > > > > > >
> > > > > > > > > > Attached are a 2.6.25-rc7 and a 2.6.24 dmesg's after two
> > > > > > > > > > successful hibernate/resume cycles.
> > > > > > > > >
> > > > > > > > > Could you please check if the problem is still present if you
> > > > > > > > > boot with acpi_new_pts_ordering kernel command line argument?
> > > > > > > >
> > > > > > > > By the way, I just added acp_new_pts_ordering at the end of the
> > > > > > > > Grub line beginning by "linux (hd0,1)/vmlinuz(...)". Is that
> > > > > > > > correct ?
> > > > > > >
> > > > > > > seems strange you should add it to the kopt line and then kick as
> > > > > > > root update-grub
> > > > > > >
> > > > > > > # kopt=root=/dev/sda1 ro
> > > > > > > it should land
> > > > > > > kernel /boot/vmlinuz-2.6.25-rc7-amd64 root=/dev/sda1 ro
> > > > > >
> > > > > > Well... I'm using Grub2 (grub-pc). I altered the boot option at
> > > > > > boot time but forgot to check /proc/cmdline. Will try again and
> > > > > > report back.
> > > > > >
> > > > > > Regards,
> > > > > >
> > > > > > Didier
> > > > >
> > > > > Hi,
> > > > >
> > > > > I tried again and ensured that /proc/cmdline 's end was
> > > > > acpi_new_pts_ordering . It did work for 2-3 hibernation, but then
> > > > > failed.
> > > >
> > > > Well, there were quite a lot of suspend-related changes between 2.6.24
> > > > and now.
> > > >
> > > > Hmm, do you have CONFIG_USB_SUSPEND set in .config by chance?
> > > >
> > > > Rafael
> > >
> > > I do (Debian default option)... I will build a kernel without it and
> > > retry.
> > >
> > > Didier
> >
> > Hi again.
> >
> > I compiled the same kernel with CONFIG_USB_SUSPEND not set. After 6
> > hibernations, I haven't had a problem for now.
> >
> > Regards,
> >
> > Didier
>
> Hi again again,
>
> It hung after the 10th hibernation...
>
> I wonder if the problem would not be of Debian's uswsusp binary, because tty1
> tells me that the image is successfully loaded but I just can't act on my box
> afterwards.
I don't really think so. s2disk doesn't really do anything that could hang a
machine, except for the console switch maybe ...
> There is a bug open in the Debian BTS requesting a packaging of the new
> upstream version (0.8) but the maintainer is told to be too busy to handle it
> for now.
>
> Don't know...
Can you please test the in-kernel hibernation, then?
Rafael
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-01 21:11 ` 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630 Rafael J. Wysocki
@ 2008-04-01 21:18 ` Didier Raboud
2008-04-01 21:22 ` Rafael J. Wysocki
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-04-01 21:18 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 246 bytes --]
Le mardi, 1 avril 2008 23.11:15 Rafael J. Wysocki, vous avez écrit :
> (...)
> Can you please test the in-kernel hibernation, then?
>
> Rafael
Hi,
would like to. How ?
# echo -n disk > /sys/power/state
?
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-01 21:18 ` Didier Raboud
@ 2008-04-01 21:22 ` Rafael J. Wysocki
2008-04-02 12:06 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Rafael J. Wysocki @ 2008-04-01 21:22 UTC (permalink / raw)
To: Didier Raboud; +Cc: linux-kernel, debian-kernel
On Tuesday, 1 of April 2008, Didier Raboud wrote:
> Le mardi, 1 avril 2008 23.11:15 Rafael J. Wysocki, vous avez écrit :
> > (...)
> > Can you please test the in-kernel hibernation, then?
> >
> > Rafael
>
> Hi,
>
> would like to. How ?
>
> # echo -n disk > /sys/power/state
Yes, should work without the "-n", too. Of course, you have to use the
'resume=' kernel command line argument for this to work.
Perhaps increase the console log level before that.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-01 21:22 ` Rafael J. Wysocki
@ 2008-04-02 12:06 ` Didier Raboud
2008-04-03 13:41 ` Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-04-02 12:06 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 862 bytes --]
Le mardi, 1 avril 2008 23.22:35 Rafael J. Wysocki, vous avez écrit :
> On Tuesday, 1 of April 2008, Didier Raboud wrote:
> > Le mardi, 1 avril 2008 23.11:15 Rafael J. Wysocki, vous avez écrit :
> > > (...)
> > > Can you please test the in-kernel hibernation, then?
> > >
> > > Rafael
> >
> > Hi,
> >
> > would like to. How ?
> >
> > # echo -n disk > /sys/power/state
>
> Yes, should work without the "-n", too. Of course, you have to use the
> 'resume=' kernel command line argument for this to work.
>
> Perhaps increase the console log level before that.
>
> Thanks,
> Rafael
Ok. I found a "better" way to do it : just uninstall uswsusp and let
kpowersave use hal to use suspend :-)
Anyway, so far so good (with USB_SUSPEND not set), no hang. I will test with
USB_SUSPEND set and the incoming 2.6.25-rc8.
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-02 12:06 ` Didier Raboud
@ 2008-04-03 13:41 ` Didier Raboud
2008-04-03 15:48 ` Rafael J. Wysocki
0 siblings, 1 reply; 19+ messages in thread
From: Didier Raboud @ 2008-04-03 13:41 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 1239 bytes --]
Le mercredi, 2 avril 2008 14.06:29 Didier Raboud, vous avez écrit :
> Le mardi, 1 avril 2008 23.22:35 Rafael J. Wysocki, vous avez écrit :
> > On Tuesday, 1 of April 2008, Didier Raboud wrote:
> > > Le mardi, 1 avril 2008 23.11:15 Rafael J. Wysocki, vous avez écrit :
> > > > (...)
> > > > Can you please test the in-kernel hibernation, then?
> > > >
> > > > Rafael
> > >
> > > Hi,
> > >
> > > would like to. How ?
> > >
> > > # echo -n disk > /sys/power/state
> >
> > Yes, should work without the "-n", too. Of course, you have to use the
> > 'resume=' kernel command line argument for this to work.
> >
> > Perhaps increase the console log level before that.
> >
> > Thanks,
> > Rafael
>
> Ok. I found a "better" way to do it : just uninstall uswsusp and let
> kpowersave use hal to use suspend :-)
>
> Anyway, so far so good (with USB_SUSPEND not set), no hang. I will test
> with USB_SUSPEND set and the incoming 2.6.25-rc8.
>
> Regards,
>
> Didier
So far so good too with "stock" Debian Kernel (2.7.25-rc7-amd64) with
USB_SUSPEND set. No hang.
The kernel suspend is less user-friendly than uswsusp though...
So I bet there is a bug in uswsusp's kernel part ?
Regards,
Didier
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630
2008-04-03 13:41 ` Didier Raboud
@ 2008-04-03 15:48 ` Rafael J. Wysocki
2008-04-10 11:30 ` 2.6.25-rc8 : hibernation sometimes not resuming on Dell Latitude D630 (was: -rc7) Didier Raboud
0 siblings, 1 reply; 19+ messages in thread
From: Rafael J. Wysocki @ 2008-04-03 15:48 UTC (permalink / raw)
To: Didier Raboud; +Cc: linux-kernel, debian-kernel
On Thursday, 3 of April 2008, Didier Raboud wrote:
> Le mercredi, 2 avril 2008 14.06:29 Didier Raboud, vous avez écrit :
> > Le mardi, 1 avril 2008 23.22:35 Rafael J. Wysocki, vous avez écrit :
> > > On Tuesday, 1 of April 2008, Didier Raboud wrote:
> > > > Le mardi, 1 avril 2008 23.11:15 Rafael J. Wysocki, vous avez écrit :
> > > > > (...)
> > > > > Can you please test the in-kernel hibernation, then?
> > > > >
> > > > > Rafael
> > > >
> > > > Hi,
> > > >
> > > > would like to. How ?
> > > >
> > > > # echo -n disk > /sys/power/state
> > >
> > > Yes, should work without the "-n", too. Of course, you have to use the
> > > 'resume=' kernel command line argument for this to work.
> > >
> > > Perhaps increase the console log level before that.
> > >
> > > Thanks,
> > > Rafael
> >
> > Ok. I found a "better" way to do it : just uninstall uswsusp and let
> > kpowersave use hal to use suspend :-)
> >
> > Anyway, so far so good (with USB_SUSPEND not set), no hang. I will test
> > with USB_SUSPEND set and the incoming 2.6.25-rc8.
> >
> > Regards,
> >
> > Didier
>
> So far so good too with "stock" Debian Kernel (2.7.25-rc7-amd64) with
> USB_SUSPEND set. No hang.
>
> The kernel suspend is less user-friendly than uswsusp though...
>
> So I bet there is a bug in uswsusp's kernel part ?
It's almost the same as the in-kernel one, especially as far as the resume is
concerned. The simplest explanation coming to mind is that the image is
somehow damaged in the uswsusp case.
You can use the uswsusp's checksumming to verify that, though.
Thanks,
Rafael
^ permalink raw reply [flat|nested] 19+ messages in thread
* Re: 2.6.25-rc8 : hibernation sometimes not resuming on Dell Latitude D630 (was: -rc7)
2008-04-03 15:48 ` Rafael J. Wysocki
@ 2008-04-10 11:30 ` Didier Raboud
0 siblings, 0 replies; 19+ messages in thread
From: Didier Raboud @ 2008-04-10 11:30 UTC (permalink / raw)
To: Rafael J. Wysocki; +Cc: linux-kernel, debian-kernel
[-- Attachment #1: Type: text/plain, Size: 2445 bytes --]
Le jeudi, 3 avril 2008 17.48:57 Rafael J. Wysocki, vous avez écrit :
> On Thursday, 3 of April 2008, Didier Raboud wrote:
> > Le mercredi, 2 avril 2008 14.06:29 Didier Raboud, vous avez écrit :
> > > Le mardi, 1 avril 2008 23.22:35 Rafael J. Wysocki, vous avez écrit :
> > > > On Tuesday, 1 of April 2008, Didier Raboud wrote:
> > > > > Le mardi, 1 avril 2008 23.11:15 Rafael J. Wysocki, vous avez écrit :
> > > > > > (...)
> > > > > > Can you please test the in-kernel hibernation, then?
> > > > > >
> > > > > > Rafael
> > > > >
> > > > > Hi,
> > > > >
> > > > > would like to. How ?
> > > > >
> > > > > # echo -n disk > /sys/power/state
> > > >
> > > > Yes, should work without the "-n", too. Of course, you have to use
> > > > the 'resume=' kernel command line argument for this to work.
> > > >
> > > > Perhaps increase the console log level before that.
> > > >
> > > > Thanks,
> > > > Rafael
> > >
> > > Ok. I found a "better" way to do it : just uninstall uswsusp and let
> > > kpowersave use hal to use suspend :-)
> > >
> > > Anyway, so far so good (with USB_SUSPEND not set), no hang. I will test
> > > with USB_SUSPEND set and the incoming 2.6.25-rc8.
> > >
> > > Regards,
> > >
> > > Didier
> >
> > So far so good too with "stock" Debian Kernel (2.7.25-rc7-amd64) with
> > USB_SUSPEND set. No hang.
> >
> > The kernel suspend is less user-friendly than uswsusp though...
> >
> > So I bet there is a bug in uswsusp's kernel part ?
>
> It's almost the same as the in-kernel one, especially as far as the resume
> is concerned. The simplest explanation coming to mind is that the image is
> somehow damaged in the uswsusp case.
>
> You can use the uswsusp's checksumming to verify that, though.
>
> Thanks,
> Rafael
Hi,
I upgraded my uswsusp to 0.8 and my kernel to 2.6.25-rc8 from Debian. I
activated the checksumming. I have hangs _again_ (I probably always had...).
Here's my /etc/uswsusp.conf :
# --------
# /etc/uswsusp.conf(8) -- Configuration file for s2disk/s2both
resume device = /dev/mapper/Tamino-swap_1
compress = y
early writeout = y
image size = 967540654
shutdown method = platform
compute checksum = y
# --------
I don't know how I can help further... I will try without "early writeout".
Any help would be greatly appreciated !
Best regards,
Didier
--
Didier Raboud
Cornalles 2
1802 Corseaux
didier@raboud.com
079 480 67 82
[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 19+ messages in thread
end of thread, other threads:[~2008-04-10 11:31 UTC | newest]
Thread overview: 19+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-31 16:23 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630 Didier Raboud
2008-03-31 16:33 ` Rafael J. Wysocki
2008-03-31 17:03 ` Didier Raboud
2008-03-31 17:24 ` maximilian attems
2008-03-31 17:36 ` Didier Raboud
2008-03-31 18:22 ` Didier Raboud
2008-03-31 20:29 ` Rafael J. Wysocki
2008-03-31 21:03 ` Didier Raboud
2008-04-01 6:18 ` Didier Raboud
2008-04-01 6:41 ` Didier Raboud
2008-04-01 19:37 ` 2.6.25-rc7 Pavel Machek
2008-04-01 21:11 ` 2.6.25-rc7 : hibernation sometimes not resuming on Dell Latitude D630 Rafael J. Wysocki
2008-04-01 21:18 ` Didier Raboud
2008-04-01 21:22 ` Rafael J. Wysocki
2008-04-02 12:06 ` Didier Raboud
2008-04-03 13:41 ` Didier Raboud
2008-04-03 15:48 ` Rafael J. Wysocki
2008-04-10 11:30 ` 2.6.25-rc8 : hibernation sometimes not resuming on Dell Latitude D630 (was: -rc7) Didier Raboud
2008-04-01 19:38 ` 2.6.25-rc7 Pavel Machek
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).