LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [git pull] agp patches for 2.6.28-rc1.
@ 2008-10-16 6:59 Dave Airlie
2008-10-19 23:11 ` Andres Freund
0 siblings, 1 reply; 15+ messages in thread
From: Dave Airlie @ 2008-10-16 6:59 UTC (permalink / raw)
To: torvalds, Andrew Morton; +Cc: linux-kernel
Hi Linus,
Please pull the 'agp-next' branch from
ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6.git agp-next
This just contains some suspend/resume fixes for the SiS, Intel memory
sizing fix for new hw, and support for more memory types on the nvidia
AGP.
Dave.
drivers/char/agp/amd-k7-agp.c | 38 ++++++++++++++++++++++++++++++++------
drivers/char/agp/intel-agp.c | 18 ++++++++++--------
drivers/char/agp/nvidia-agp.c | 22 ++++++++++++++++++----
3 files changed, 60 insertions(+), 18 deletions(-)
commit a64d2b37c2259e169759c1701ac565f0a11dc0ea
Author: Thomas Hellstrom <thomas-at-tungstengraphics-dot-com>
Date: Wed Sep 10 14:13:33 2008 +0200
agp/nvidia: Support agp user-memory on nvidia agp.
This adds user memory support required for TTM to the nvidia AGP driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 2a32c3c894bcd3b3f8cc7e23f5ecbebca4a9f8e8
Author: Stuart Bennett <stuart@freedesktop.org>
Date: Tue Aug 12 15:19:18 2008 +0100
agp/amd-k7: Suspend support for AMD K7 GART driver
Reinitialize bridge registers after suspend, but avoid repeating the ioremap
Tested and works on AMD761
Signed-off-by: Stuart Bennett <stuart@freedesktop.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 44d494417278e49f5b42bd3ded1801b6d2254db8
Author: Keith Packard <keithp@keithp.com>
Date: Tue Oct 14 17:18:45 2008 -0700
agp/intel: Reduce extraneous PCI posting reads during init
Instead of doing a posting read after each GTT entry update, do a single one
at the end of the writes. This should reduce boot time a tiny amount by
avoiding a lot of extra uncached reads.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
commit 82e14a6215cbc9804ecc35281e973c6c8ce22fe7
Author: Eric Anholt <eric@anholt.net>
Date: Tue Oct 14 11:28:58 2008 -0700
agp: Fix stolen memory counting on G4X.
On the GM45, the amount of stolen memory mapped to the GTT was underestimated,
even though we had 508KB more available since the GTT doesn't take from
stolen memory. On the non-GM45 G4X, we overestimated how much stolen was
mapped to the GTT by 4KB, resulting in GPU page faults when that page was
accessed.
This update requires a corresponding update to xf86-video-intel to work
correctly.
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-16 6:59 [git pull] agp patches for 2.6.28-rc1 Dave Airlie
@ 2008-10-19 23:11 ` Andres Freund
2008-10-19 23:25 ` Dave Airlie
0 siblings, 1 reply; 15+ messages in thread
From: Andres Freund @ 2008-10-19 23:11 UTC (permalink / raw)
To: Dave Airlie; +Cc: torvalds, Andrew Morton, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 824 bytes --]
Hi Dave,
On Thursday 16 October 2008 08:59:57 Dave Airlie wrote:
> Please pull the 'agp-next' branch from
> ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6.git
> agp-next
>
> This just contains some suspend/resume fixes for the SiS, Intel memory
> sizing fix for new hw, and support for more memory types on the nvidia
> AGP.
One of those patches breaks X on my laptop with:
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01f7f000 (pgoffset 8063)
(WW) intel(0): xf86BindGARTMemory: binding of gart memory with key 0
at offset 0x1f7f000 failed (Invalid argument)
Fatal server error:
Couldn't bind memory for exa offscreen
(Found via bisect with some guessing)
If neccessary I can bisect further, but I guess you know what the problem is.
Andres
Xorg is: 1.5.2-2
Xorg Intel: 2.4.1-1ubuntu9
[-- Attachment #2: lspci-vv --]
[-- Type: text/plain, Size: 16400 bytes --]
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Lenovo Device 20e0
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 2114
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Capabilities: <access denied>
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Lenovo Device 2114
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f4200000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:03.0 Communication controller: Intel Corporation Mobile 4 Series Chipset MEI Controller (rev 07)
Subsystem: Lenovo Device 20e6
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc226800 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
Subsystem: Lenovo Device 20ee
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 2298
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at fc025000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc226c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Lenovo Device 20f2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fc020000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f4300000-f43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f40fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=14, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f4100000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 18e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Lenovo Device 20f0
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1c00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
Subsystem: Lenovo Device 20f1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 0: Memory at fc227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=15, subordinate=18, sec-latency=32
I/O behind bridge: 00004000-00007fff
Memory behind bridge: f4800000-f7ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Lenovo Device 20f5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01)
Subsystem: Lenovo Device 20f8
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 2299
Region 0: I/O ports at 1c48 [size=8]
Region 1: I/O ports at 183c [size=4]
Region 2: I/O ports at 1c40 [size=8]
Region 3: I/O ports at 1838 [size=4]
Region 4: I/O ports at 1c20 [size=32]
Region 5: Memory at fc226000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Lenovo Device 20f9
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc227400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c60 [size=32]
Kernel modules: i2c-i801
03:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Subsystem: Intel Corporation Device 1011
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f4300000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
15:00.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev ba)
Subsystem: Lenovo Device 20c6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f4800000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=15, secondary=16, subordinate=17, sec-latency=176
Memory window 0: f0000000-f3fff000 (prefetchable)
Memory window 1: c4000000-c7fff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
15:00.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 04) (prog-if 10)
Subsystem: Lenovo Device 20c7
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f4801000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
15:00.2 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 21)
Subsystem: Lenovo Device 20c8
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f4801800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
15:00.3 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev ff) (prog-if ff)
!!! Unknown header type 7f
Kernel driver in use: ricoh-mmc
Kernel modules: ricoh_mmc
15:00.4 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 11)
Subsystem: Lenovo Device 20ca
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4802000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
15:00.5 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 11)
Subsystem: Lenovo Device 20cb
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 11
Region 0: Memory at f4802400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
[-- Attachment #3: Xorg.0.log --]
[-- Type: text/x-log, Size: 17960 bytes --]
X.Org X Server 1.5.2
Release Date: 10 October 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-15-server x86_64 Ubuntu
Current Operating System: Linux alap2 2.6.27-andres-04909-ga45fbc3 #28 SMP Mon Oct 20 00:27:52 CEST 2008 x86_64
Build Date: 18 October 2008 10:30:27AM
xorg-server 2:1.5.2-2build1 (buildd@crested.buildd)
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Oct 20 00:33:27 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "Configured Monitor"
(**) | |-->Device "Configured Video Device"
(**) |-->Input Device "Generic Mouse"
(**) |-->Input Device "Generic Keyboard"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) No FontPath specified. Using compiled-in default.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x7b7320
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf4200000/1048576
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
(II) Matched intel from file name intel.ids
(==) Matched intel for the autoconfigured driver
(==) Assigned the driver to the xf86ConfigLayout
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.15.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.99.905, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Creating default Display subsection in Screen section
"Default Screen" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF4400000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 32704 kB
(II) intel(0): VESA VBE OEM: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Cantiga Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Configured Monitor
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16467
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SAM", prod id 952
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1680x1050"x60.0 147.14 1680 1784 1968 2256 1050 1051 1054 1087 -hsync +vsync (65.2 kHz)
(II) intel(0): Modeline "1280x1024"x60.0 108.88 1280 1360 1496 1712 1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x960"x60.0 102.10 1280 1360 1496 1712 960 961 964 994 -hsync +vsync (59.6 kHz)
(II) intel(0): Modeline "1152x864"x75.0 104.99 1152 1224 1352 1552 864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): EDID vendor "SAM", prod id 952
(II) intel(0): EDID vendor "LEN", prod id 16467
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1680x1050
(II) intel(0): Output LVDS using initial mode 1680x1050
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32252 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (470, 300) mm
(**) intel(0): DPI set to (90, 142)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x71034000 to 0x56020e00
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[B]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[B]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 1248000 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 4991996 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xf4400000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
(II) intel(0): [drm] mapped back buffer at 0xd2ef1000, handle = 0xd2ef1000
(II) intel(0): [drm] mapped depth buffer at 0xd3a6d000, handle = 0xd3a6d000
(II) intel(0): [drm] mapped classic textures at 0xd45e9000, handle = 0xd45e9000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 36126720 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01f7f000 (pgoffset 8063)
(WW) intel(0): xf86BindGARTMemory: binding of gart memory with key 0
at offset 0x1f7f000 failed (Invalid argument)
Fatal server error:
Couldn't bind memory for exa offscreen
Backtrace:
0: /usr/X11R6/bin/X(xf86SigHandler+0x65) [0x480f35]
1: /lib/libc.so.6 [0x7fcd73c5e060]
2: /usr/lib/xorg/modules/drivers//intel_drv.so(gen4_render_state_cleanup+0xe) [0x7fcd726a092e]
3: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7fcd7267c668]
4: /usr/X11R6/bin/X(AbortDDX+0x8d) [0x4681ed]
5: /usr/X11R6/bin/X(AbortServer+0x18) [0x4f8248]
6: /usr/X11R6/bin/X(FatalError+0xd5) [0x4f8915]
7: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7fcd72684ea5]
8: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7fcd7267ce97]
9: /usr/lib/xorg/modules/drivers//intel_drv.so [0x7fcd7267e75d]
10: /usr/X11R6/bin/X(AddScreen+0x1c9) [0x432d89]
11: /usr/X11R6/bin/X(InitOutput+0x241) [0x469a61]
12: /usr/X11R6/bin/X(main+0x286) [0x433526]
13: /lib/libc.so.6(__libc_start_main+0xe6) [0x7fcd73c49466]
14: /usr/X11R6/bin/X [0x432ad9]
Saw signal 11. Server aborting.
[-- Attachment #4: bisect-config --]
[-- Type: text/plain, Size: 67167 bytes --]
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.27
# Mon Oct 20 00:17:14 2008
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION="-andres"
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
CONFIG_RELAY=y
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
CONFIG_MARKERS=y
CONFIG_OPROFILE=m
# CONFIG_OPROFILE_IBS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
CONFIG_KMOD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_IO_TRACE=y
# CONFIG_BLK_DEV_BSG is not set
CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_CLASSIC_RCU=y
#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_VSMP is not set
CONFIG_PARAVIRT_GUEST=y
CONFIG_XEN=y
CONFIG_XEN_MAX_DOMAIN_MEMORY=32
CONFIG_XEN_SAVE_RESTORE=y
# CONFIG_XEN_DEBUG_FS is not set
CONFIG_KVM_CLOCK=y
CONFIG_KVM_GUEST=y
CONFIG_PARAVIRT=y
CONFIG_PARAVIRT_CLOCK=y
# CONFIG_PARAVIRT_DEBUG is not set
CONFIG_MEMTEST=y
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
CONFIG_MCORE2=y
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_CPU=y
CONFIG_X86_L1_CACHE_BYTES=64
CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_P6_NOP=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR_64=y
# CONFIG_X86_DS is not set
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
# CONFIG_AMD_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
CONFIG_NR_CPUS=64
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
CONFIG_PREEMPT_VOLUNTARY=y
# CONFIG_PREEMPT is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=m
# CONFIG_MICROCODE_INTEL is not set
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
# CONFIG_DISCONTIGMEM_MANUAL is not set
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_VMEMMAP=y
#
# Memory hotplug is currently incompatible with Software Suspend
#
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
# CONFIG_X86_RESERVE_LOW_64K is not set
CONFIG_MTRR=y
CONFIG_MTRR_SANITIZER=y
CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0
CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
CONFIG_HZ_300=y
# CONFIG_HZ_1000 is not set
CONFIG_HZ=300
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x200000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
#
# Power management options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_VERBOSE is not set
CONFIG_CAN_PM_TRACE=y
CONFIG_PM_TRACE=y
CONFIG_PM_TRACE_RTC=y
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_PM_TEST_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_BAY=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
CONFIG_ACPI_CUSTOM_DSDT_FILE=""
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_PCI_SLOT=m
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=m
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=m
CONFIG_CPU_FREQ_STAT_DETAILS=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
#
# CPUFreq processor drivers
#
CONFIG_X86_ACPI_CPUFREQ=m
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_ACPI_CPUFREQ_PROC_INTF is not set
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_DMAR is not set
# CONFIG_INTR_REMAP is not set
CONFIG_PCIEPORTBUS=y
CONFIG_HOTPLUG_PCI_PCIE=m
CONFIG_PCIEAER=y
CONFIG_PCIEASPM=y
# CONFIG_PCIEASPM_DEBUG is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_PCMCIA_LOAD_CIS=y
CONFIG_PCMCIA_IOCTL=y
CONFIG_CARDBUS=y
#
# PC-card bridges
#
CONFIG_YENTA=m
CONFIG_YENTA_O2=y
CONFIG_YENTA_RICOH=y
CONFIG_YENTA_TI=y
CONFIG_YENTA_ENE_TUNE=y
CONFIG_YENTA_TOSHIBA=y
CONFIG_PD6729=m
CONFIG_I82092=m
CONFIG_PCCARD_NONSTATIC=m
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_FAKE=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_ACPI_IBM=m
CONFIG_HOTPLUG_PCI_CPCI=y
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
CONFIG_HOTPLUG_PCI_SHPC=m
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_IA32_EMULATION=y
CONFIG_IA32_AOUT=m
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
CONFIG_XFRM_STATISTICS=y
CONFIG_XFRM_IPCOMP=m
CONFIG_NET_KEY=m
CONFIG_NET_KEY_MIGRATE=y
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
# CONFIG_IP_PNP is not set
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
CONFIG_INET_LRO=m
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
CONFIG_TCP_MD5SIG=y
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
CONFIG_IPV6_MIP6=m
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
CONFIG_IPV6_MULTIPLE_TABLES=y
CONFIG_IPV6_SUBTREES=y
CONFIG_IPV6_MROUTE=y
# CONFIG_IPV6_PIMSM_V2 is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=y
CONFIG_NETFILTER_NETLINK_QUEUE=y
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
# CONFIG_NF_CT_PROTO_SCTP is not set
# CONFIG_NF_CT_PROTO_UDPLITE is not set
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
# CONFIG_NF_CONNTRACK_TFTP is not set
# CONFIG_NF_CT_NETLINK is not set
CONFIG_NETFILTER_XTABLES=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_RECENT=m
# CONFIG_NETFILTER_XT_MATCH_RECENT_PROC_COMPAT is not set
# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_IP_VS=m
# CONFIG_IP_VS_IPV6 is not set
# CONFIG_IP_VS_DEBUG is not set
CONFIG_IP_VS_TAB_BITS=12
#
# IPVS transport protocol load balancing support
#
CONFIG_IP_VS_PROTO_TCP=y
CONFIG_IP_VS_PROTO_UDP=y
CONFIG_IP_VS_PROTO_AH_ESP=y
CONFIG_IP_VS_PROTO_ESP=y
CONFIG_IP_VS_PROTO_AH=y
#
# IPVS scheduler
#
CONFIG_IP_VS_RR=m
CONFIG_IP_VS_WRR=m
CONFIG_IP_VS_LC=m
CONFIG_IP_VS_WLC=m
CONFIG_IP_VS_LBLC=m
CONFIG_IP_VS_LBLCR=m
CONFIG_IP_VS_DH=m
CONFIG_IP_VS_SH=m
CONFIG_IP_VS_SED=m
CONFIG_IP_VS_NQ=m
#
# IPVS application helper
#
CONFIG_IP_VS_FTP=m
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_NF_NAT_SNMP_BASIC=m
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
# CONFIG_NF_NAT_PPTP is not set
# CONFIG_NF_NAT_H323 is not set
# CONFIG_NF_NAT_SIP is not set
# CONFIG_IP_NF_MANGLE is not set
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_SECURITY=m
# CONFIG_IP_NF_ARPTABLES is not set
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_QUEUE is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_STP=m
CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y
#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_MULTIQ=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m
#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
# CONFIG_CLS_U32_PERF is not set
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
CONFIG_NET_ACT_NAT=m
CONFIG_NET_ACT_PEDIT=m
CONFIG_NET_ACT_SIMP=m
CONFIG_NET_ACT_SKBEDIT=m
# CONFIG_NET_CLS_IND is not set
CONFIG_NET_SCH_FIFO=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
CONFIG_IRDA_DEBUG=y
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
CONFIG_KSDAZZLE_DONGLE=m
CONFIG_KS959_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m
#
# Bluetooth device drivers
#
CONFIG_BT_HCIBTUSB=m
CONFIG_BT_HCIBTSDIO=m
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIUART_LL=y
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
# CONFIG_BT_HCIBFUSB is not set
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIBTUART=m
CONFIG_BT_HCIVHCI=m
CONFIG_AF_RXRPC=m
# CONFIG_AF_RXRPC_DEBUG is not set
CONFIG_RXKAD=m
# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_PID=y
# CONFIG_MAC80211_RC_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
CONFIG_MAC80211_DEBUGFS=y
# CONFIG_MAC80211_DEBUG_MENU is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=m
CONFIG_RFKILL_LEDS=y
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_STANDALONE is not set
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_SX8 is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=65536
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=m
CONFIG_CDROM_PKTCDVD_BUFFERS=8
# CONFIG_CDROM_PKTCDVD_WCACHE is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XEN_BLKDEV_FRONTEND is not set
# CONFIG_VIRTIO_BLK is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
# CONFIG_TIFM_7XX1 is not set
# CONFIG_ACER_WMI is not set
# CONFIG_ASUS_LAPTOP is not set
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_HP_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_COMPAL_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
CONFIG_THINKPAD_ACPI=m
# CONFIG_THINKPAD_ACPI_DEBUG is not set
CONFIG_THINKPAD_ACPI_BAY=y
CONFIG_THINKPAD_ACPI_VIDEO=y
CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y
CONFIG_INTEL_MENLOW=m
# CONFIG_EEEPC_LAPTOP is not set
CONFIG_ENCLOSURE_SERVICES=m
# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
# CONFIG_SGI_GRU is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
#
# SCSI device support
#
CONFIG_RAID_ATTRS=m
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=m
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=m
# CONFIG_CHR_DEV_ST is not set
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_SCSI_WAIT_SCAN=m
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
CONFIG_SCSI_FC_TGT_ATTRS=y
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_SCSI_SRP_TGT_ATTRS=y
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=y
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
CONFIG_ATA_GENERIC=y
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PCMCIA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_AUTODETECT=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=y
CONFIG_MD_RAID456=y
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=y
CONFIG_MD_FAULTY=y
CONFIG_BLK_DEV_DM=y
# CONFIG_DM_DEBUG is not set
CONFIG_DM_CRYPT=y
CONFIG_DM_SNAPSHOT=y
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=y
CONFIG_DM_MULTIPATH=y
CONFIG_DM_DELAY=y
CONFIG_DM_UEVENT=y
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
#
# Enable only one of the two stacks, unless you know what you are doing
#
CONFIG_FIREWIRE=m
CONFIG_FIREWIRE_OHCI=m
CONFIG_FIREWIRE_OHCI_DEBUG=y
CONFIG_FIREWIRE_SBP2=m
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_IFB=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_MACVLAN=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_VETH=m
# CONFIG_NET_SB1000 is not set
# CONFIG_ARCNET is not set
# CONFIG_NET_ETHERNET is not set
CONFIG_MII=m
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000E=m
CONFIG_IP1000=m
CONFIG_IGB=m
# CONFIG_IGB_LRO is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
CONFIG_IWLWIFI=m
CONFIG_IWLCORE=m
CONFIG_IWLWIFI_LEDS=y
CONFIG_IWLWIFI_RFKILL=y
# CONFIG_IWLWIFI_DEBUG is not set
CONFIG_IWLAGN=m
CONFIG_IWLAGN_SPECTRUM_MEASUREMENT=y
CONFIG_IWLAGN_LEDS=y
CONFIG_IWL4965=y
CONFIG_IWL5000=y
CONFIG_IWL3945=m
CONFIG_IWL3945_RFKILL=y
CONFIG_IWL3945_SPECTRUM_MEASUREMENT=y
CONFIG_IWL3945_LEDS=y
# CONFIG_IWL3945_DEBUG is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
CONFIG_USB_USBNET=m
# CONFIG_USB_NET_AX8817X is not set
CONFIG_USB_NET_CDCETHER=m
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
# CONFIG_USB_NET_NET1080 is not set
# CONFIG_USB_NET_PLUSB is not set
# CONFIG_USB_NET_MCS7830 is not set
CONFIG_USB_NET_RNDIS_HOST=m
CONFIG_USB_NET_CDC_SUBSET=m
CONFIG_USB_ALI_M5632=y
CONFIG_USB_AN2720=y
CONFIG_USB_BELKIN=y
CONFIG_USB_ARMLINUX=y
CONFIG_USB_EPSON2888=y
CONFIG_USB_KC2190=y
# CONFIG_USB_NET_ZAURUS is not set
CONFIG_USB_HSO=m
# CONFIG_NET_PCMCIA is not set
# CONFIG_WAN is not set
# CONFIG_XEN_NETDEV_FRONTEND is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
CONFIG_NETCONSOLE=y
CONFIG_NETCONSOLE_DYNAMIC=y
CONFIG_NETPOLL=y
CONFIG_NETPOLL_TRAP=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_VIRTIO_NET is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_LKKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_KEYBOARD_STOWAWAY=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_APPLETOUCH=m
CONFIG_MOUSE_BCM5974=m
CONFIG_MOUSE_VSXXXAA=m
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
# CONFIG_INPUT_PCSPKR is not set
# CONFIG_INPUT_APANEL is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
# CONFIG_INPUT_ATI_REMOTE is not set
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
# CONFIG_INPUT_POWERMATE is not set
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_CM109 is not set
CONFIG_INPUT_UINPUT=m
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PCIPS2=m
CONFIG_SERIO_LIBPS2=y
CONFIG_SERIO_RAW=m
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_FM801=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_COMPUTONE is not set
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_DIGIEPCA is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_ISI is not set
# CONFIG_SYNCLINK is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_N_HDLC is not set
# CONFIG_RISCOM8 is not set
# CONFIG_SPECIALIX is not set
# CONFIG_SX is not set
# CONFIG_RIO is not set
# CONFIG_STALDRV is not set
CONFIG_NOZOMI=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_NR_UARTS=48
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_JSM=m
CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_XEN is not set
# CONFIG_VIRTIO_CONSOLE is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=m
CONFIG_HW_RANDOM_AMD=m
CONFIG_HW_RANDOM_VIRTIO=m
CONFIG_NVRAM=m
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_CARDMAN_4000=m
CONFIG_CARDMAN_4040=m
# CONFIG_IPWIRELESS is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HANGCHECK_TIMER=y
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
# CONFIG_I2C_HELPER_AUTO is not set
#
# I2C Algorithms
#
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
CONFIG_I2C_ISCH=m
CONFIG_I2C_PIIX4=m
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_SIMTEC is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Graphics adapter I2C/DDC channel drivers
#
# CONFIG_I2C_VOODOO3 is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
CONFIG_AT24=m
CONFIG_SENSORS_EEPROM=m
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
CONFIG_W1=m
#
# 1-wire Bus Masters
#
# CONFIG_W1_MASTER_MATROX is not set
# CONFIG_W1_MASTER_DS2490 is not set
# CONFIG_W1_MASTER_DS2482 is not set
#
# 1-wire Slaves
#
CONFIG_W1_SLAVE_THERM=m
# CONFIG_W1_SLAVE_SMEM is not set
# CONFIG_W1_SLAVE_DS2433 is not set
CONFIG_W1_SLAVE_DS2760=m
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
CONFIG_PDA_POWER=m
CONFIG_BATTERY_DS2760=m
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_CORETEMP=m
CONFIG_SENSORS_IT87=m
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
#
# Watchdog Device Drivers
#
CONFIG_SOFT_WATCHDOG=m
# CONFIG_ACQUIRE_WDT is not set
# CONFIG_ADVANTECH_WDT is not set
# CONFIG_ALIM1535_WDT is not set
# CONFIG_ALIM7101_WDT is not set
# CONFIG_SC520_WDT is not set
# CONFIG_EUROTECH_WDT is not set
# CONFIG_IB700_WDT is not set
# CONFIG_IBMASR is not set
# CONFIG_WAFER_WDT is not set
CONFIG_I6300ESB_WDT=m
CONFIG_ITCO_WDT=m
CONFIG_ITCO_VENDOR_SUPPORT=y
# CONFIG_IT8712F_WDT is not set
# CONFIG_IT87_WDT is not set
# CONFIG_HP_WATCHDOG is not set
# CONFIG_SC1200_WDT is not set
# CONFIG_PC87413_WDT is not set
# CONFIG_60XX_WDT is not set
# CONFIG_SBC8360_WDT is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_SMSC37B787_WDT is not set
# CONFIG_W83627HF_WDT is not set
# CONFIG_W83697HF_WDT is not set
# CONFIG_W83697UG_WDT is not set
# CONFIG_W83877F_WDT is not set
# CONFIG_W83977F_WDT is not set
# CONFIG_MACHZ_WDT is not set
# CONFIG_SBC_EPX_C3_WATCHDOG is not set
#
# PCI-based Watchdog Cards
#
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_WDTPCI is not set
#
# USB-based Watchdog Cards
#
# CONFIG_USBPCWATCHDOG is not set
#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_UCB1400_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
CONFIG_VIDEO_DEV=m
CONFIG_VIDEO_V4L2_COMMON=m
CONFIG_VIDEO_ALLOW_V4L1=y
CONFIG_VIDEO_V4L1_COMPAT=y
CONFIG_DVB_CORE=m
CONFIG_VIDEO_MEDIA=m
#
# Multimedia drivers
#
CONFIG_MEDIA_ATTACH=y
CONFIG_MEDIA_TUNER=m
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
CONFIG_MEDIA_TUNER_TEA5761=m
CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_MT2060=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
CONFIG_VIDEO_V4L2=m
CONFIG_VIDEO_V4L1=m
# CONFIG_VIDEO_CAPTURE_DRIVERS is not set
# CONFIG_RADIO_ADAPTERS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported SAA7146 based PCI Adapters
#
# CONFIG_TTPCI_EEPROM is not set
# CONFIG_DVB_AV7110 is not set
# CONFIG_DVB_BUDGET_CORE is not set
#
# Supported USB Adapters
#
CONFIG_DVB_USB=m
# CONFIG_DVB_USB_DEBUG is not set
# CONFIG_DVB_USB_A800 is not set
# CONFIG_DVB_USB_DIBUSB_MB is not set
# CONFIG_DVB_USB_DIBUSB_MC is not set
# CONFIG_DVB_USB_DIB0700 is not set
# CONFIG_DVB_USB_UMT_010 is not set
# CONFIG_DVB_USB_CXUSB is not set
# CONFIG_DVB_USB_M920X is not set
# CONFIG_DVB_USB_GL861 is not set
# CONFIG_DVB_USB_AU6610 is not set
# CONFIG_DVB_USB_DIGITV is not set
# CONFIG_DVB_USB_VP7045 is not set
# CONFIG_DVB_USB_VP702X is not set
# CONFIG_DVB_USB_GP8PSK is not set
CONFIG_DVB_USB_NOVA_T_USB2=m
# CONFIG_DVB_USB_TTUSB2 is not set
# CONFIG_DVB_USB_DTT200U is not set
# CONFIG_DVB_USB_OPERA1 is not set
# CONFIG_DVB_USB_AF9005 is not set
# CONFIG_DVB_USB_DW2102 is not set
# CONFIG_DVB_USB_CINERGY_T2 is not set
# CONFIG_DVB_USB_ANYSEE is not set
# CONFIG_DVB_USB_DTV5100 is not set
# CONFIG_DVB_USB_AF9015 is not set
# CONFIG_DVB_TTUSB_BUDGET is not set
# CONFIG_DVB_TTUSB_DEC is not set
# CONFIG_DVB_SIANO_SMS1XXX is not set
#
# Supported FlexCopII (B2C2) Adapters
#
# CONFIG_DVB_B2C2_FLEXCOP is not set
#
# Supported BT878 Adapters
#
#
# Supported Pluto2 Adapters
#
# CONFIG_DVB_PLUTO2 is not set
#
# Supported SDMC DM1105 Adapters
#
# CONFIG_DVB_DM1105 is not set
#
# Supported DVB Frontends
#
#
# Customise DVB Frontends
#
# CONFIG_DVB_FE_CUSTOMISE is not set
#
# DVB-S (satellite) frontends
#
# CONFIG_DVB_CX24110 is not set
# CONFIG_DVB_CX24123 is not set
# CONFIG_DVB_MT312 is not set
# CONFIG_DVB_S5H1420 is not set
# CONFIG_DVB_STV0288 is not set
# CONFIG_DVB_STB6000 is not set
# CONFIG_DVB_STV0299 is not set
# CONFIG_DVB_TDA8083 is not set
# CONFIG_DVB_TDA10086 is not set
# CONFIG_DVB_VES1X93 is not set
# CONFIG_DVB_TUNER_ITD1000 is not set
# CONFIG_DVB_TDA826X is not set
# CONFIG_DVB_TUA6100 is not set
# CONFIG_DVB_CX24116 is not set
# CONFIG_DVB_SI21XX is not set
#
# DVB-T (terrestrial) frontends
#
# CONFIG_DVB_SP8870 is not set
# CONFIG_DVB_SP887X is not set
# CONFIG_DVB_CX22700 is not set
# CONFIG_DVB_CX22702 is not set
# CONFIG_DVB_DRX397XD is not set
# CONFIG_DVB_L64781 is not set
# CONFIG_DVB_TDA1004X is not set
# CONFIG_DVB_NXT6000 is not set
# CONFIG_DVB_MT352 is not set
# CONFIG_DVB_ZL10353 is not set
CONFIG_DVB_DIB3000MB=m
CONFIG_DVB_DIB3000MC=m
CONFIG_DVB_DIB7000M=m
CONFIG_DVB_DIB7000P=m
CONFIG_DVB_TDA10048=m
#
# DVB-C (cable) frontends
#
CONFIG_DVB_VES1820=m
# CONFIG_DVB_TDA10021 is not set
# CONFIG_DVB_TDA10023 is not set
# CONFIG_DVB_STV0297 is not set
#
# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
#
# CONFIG_DVB_NXT200X is not set
# CONFIG_DVB_OR51211 is not set
# CONFIG_DVB_OR51132 is not set
# CONFIG_DVB_BCM3510 is not set
# CONFIG_DVB_LGDT330X is not set
# CONFIG_DVB_S5H1409 is not set
# CONFIG_DVB_AU8522 is not set
# CONFIG_DVB_S5H1411 is not set
#
# Digital terrestrial only tuners/PLL
#
CONFIG_DVB_PLL=m
CONFIG_DVB_TUNER_DIB0070=m
#
# SEC control devices for DVB-S
#
# CONFIG_DVB_LNBP21 is not set
# CONFIG_DVB_ISL6405 is not set
# CONFIG_DVB_ISL6421 is not set
# CONFIG_DVB_LGS8GL5 is not set
#
# Tools to develop new frontends
#
# CONFIG_DVB_DUMMY_FE is not set
# CONFIG_DVB_AF9013 is not set
# CONFIG_DAB is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_DRM=m
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_I915=m
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
CONFIG_VGASTATE=y
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
CONFIG_FB_DDC=y
CONFIG_FB_BOOT_VESA_SUPPORT=y
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
CONFIG_FB_TILEBLITTING=y
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
CONFIG_FB_VGA16=y
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
CONFIG_FB_LE80578=y
CONFIG_FB_CARILLO_RANCH=y
CONFIG_FB_INTEL=y
# CONFIG_FB_INTEL_DEBUG is not set
CONFIG_FB_INTEL_I2C=y
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_XEN_FBDEV_FRONTEND is not set
# CONFIG_FB_METRONOME is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
CONFIG_LCD_PLATFORM=m
CONFIG_BACKLIGHT_CLASS_DEVICE=y
CONFIG_BACKLIGHT_CORGI=m
CONFIG_BACKLIGHT_PROGEAR=m
CONFIG_BACKLIGHT_CARILLO_RANCH=m
CONFIG_BACKLIGHT_MBP_NVIDIA=m
#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=m
#
# Display hardware drivers
#
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=64
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_PCSP=m
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_HWDEP=y
CONFIG_SND_HDA_INPUT_BEEP=y
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_ATIHDMI=y
CONFIG_SND_HDA_CODEC_NVHDMI=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
CONFIG_SND_USB_AUDIO=m
# CONFIG_SND_USB_USX2Y is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_US122L is not set
# CONFIG_SND_PCMCIA is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=m
# CONFIG_HID_DEBUG is not set
CONFIG_HIDRAW=y
#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
#
# Special HID drivers
#
# CONFIG_HID_COMPAT is not set
CONFIG_HID_A4TECH=m
CONFIG_HID_APPLE=m
CONFIG_HID_BELKIN=m
CONFIG_HID_BRIGHT=m
CONFIG_HID_CHERRY=m
CONFIG_HID_CHICONY=m
CONFIG_HID_CYPRESS=m
CONFIG_HID_DELL=m
CONFIG_HID_EZKEY=m
CONFIG_HID_GYRATION=m
CONFIG_HID_LOGITECH=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=m
CONFIG_HID_MONTEREY=m
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=m
CONFIG_HID_SAMSUNG=m
CONFIG_HID_SONY=m
CONFIG_HID_SUNPLUS=m
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
CONFIG_USB_MON=y
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=m
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_WDM=m
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#
#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
CONFIG_USB_GADGET=m
# CONFIG_USB_GADGET_DEBUG is not set
# CONFIG_USB_GADGET_DEBUG_FILES is not set
# CONFIG_USB_GADGET_DEBUG_FS is not set
CONFIG_USB_GADGET_SELECTED=y
# CONFIG_USB_GADGET_AMD5536UDC is not set
# CONFIG_USB_GADGET_ATMEL_USBA is not set
# CONFIG_USB_GADGET_FSL_USB2 is not set
CONFIG_USB_GADGET_NET2280=y
CONFIG_USB_NET2280=m
# CONFIG_USB_GADGET_PXA25X is not set
# CONFIG_USB_GADGET_M66592 is not set
# CONFIG_USB_GADGET_PXA27X is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_S3C2410 is not set
# CONFIG_USB_GADGET_AT91 is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
CONFIG_USB_GADGET_DUALSPEED=y
CONFIG_USB_ZERO=m
CONFIG_USB_ETH=m
CONFIG_USB_ETH_RNDIS=y
CONFIG_USB_GADGETFS=m
CONFIG_USB_FILE_STORAGE=m
# CONFIG_USB_FILE_STORAGE_TEST is not set
CONFIG_USB_G_SERIAL=m
CONFIG_USB_MIDI_GADGET=m
CONFIG_USB_G_PRINTER=m
CONFIG_USB_CDC_COMPOSITE=m
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
CONFIG_SDIO_UART=m
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
CONFIG_MMC_RICOH_MMC=m
# CONFIG_MMC_WBSD is not set
# CONFIG_MMC_TIFM_SD is not set
CONFIG_MMC_SDRICOH_CS=m
CONFIG_MEMSTICK=m
# CONFIG_MEMSTICK_DEBUG is not set
#
# MemoryStick drivers
#
# CONFIG_MEMSTICK_UNSAFE_RESUME is not set
CONFIG_MSPRO_BLOCK=m
#
# MemoryStick Host Controller Drivers
#
# CONFIG_MEMSTICK_TIFM_MS is not set
# CONFIG_MEMSTICK_JMICRON_38X is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=m
#
# LED drivers
#
CONFIG_LEDS_PCA9532=m
CONFIG_LEDS_CLEVO_MAIL=m
CONFIG_LEDS_PCA955X=m
#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=m
CONFIG_LEDS_TRIGGER_HEARTBEAT=m
CONFIG_LEDS_TRIGGER_DEFAULT_ON=m
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
#
# Reporting subsystems
#
# CONFIG_EDAC_DEBUG is not set
CONFIG_EDAC_MM_EDAC=m
CONFIG_EDAC_E752X=m
CONFIG_EDAC_I82975X=m
CONFIG_EDAC_I3000=m
CONFIG_EDAC_I5000=m
CONFIG_EDAC_I5100=m
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_DRV_TEST=m
#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
# CONFIG_RTC_DRV_S35390A is not set
CONFIG_RTC_DRV_FM3130=m
#
# SPI RTC drivers
#
#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=y
# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
# CONFIG_RTC_DRV_M48T35 is not set
CONFIG_RTC_DRV_M48T59=m
# CONFIG_RTC_DRV_BQ4802 is not set
CONFIG_RTC_DRV_V3020=m
#
# on-CPU RTC drivers
#
CONFIG_DMADEVICES=y
#
# DMA Devices
#
CONFIG_INTEL_IOATDMA=m
CONFIG_DMA_ENGINE=y
#
# DMA Clients
#
CONFIG_NET_DMA=y
# CONFIG_DMATEST is not set
CONFIG_DCA=m
# CONFIG_UIO is not set
# CONFIG_XEN_BALLOON is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_EFI_VARS is not set
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set
#
# File systems
#
CONFIG_EXT2_FS=m
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4_FS=y
CONFIG_EXT4DEV_COMPAT=y
CONFIG_EXT4_FS_XATTR=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_QUOTA=y
CONFIG_QUOTA_NETLINK_INTERFACE=y
CONFIG_PRINT_QUOTA_WARNING=y
CONFIG_QFMT_V1=y
CONFIG_QFMT_V2=y
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y
#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
CONFIG_SMB_FS=m
# CONFIG_SMB_NLS_DEFAULT is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
CONFIG_CIFS_WEAK_PW_HASH=y
CONFIG_CIFS_UPCALL=y
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
CONFIG_CIFS_DFS_UPCALL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
# CONFIG_LDM_DEBUG is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
CONFIG_SYSV68_PARTITION=y
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="utf8"
CONFIG_NLS_CODEPAGE_437=m
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
CONFIG_NLS_CODEPAGE_852=m
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ASCII=m
CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=m
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
# CONFIG_ENABLE_WARN_DEPRECATED is not set
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FTRACE=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_TRACING=y
CONFIG_FTRACE=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_FIREWIRE_OHCI_REMOTE_DMA is not set
# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DIRECT_GBPAGES is not set
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_MMIOTRACE is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
# CONFIG_IO_DELAY_0X80 is not set
CONFIG_IO_DELAY_0XED=y
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=1
# CONFIG_DEBUG_BOOT_PARAMS is not set
# CONFIG_CPA_DEBUG is not set
CONFIG_OPTIMIZE_INLINING=y
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITYFS=y
CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_NETWORK_XFRM is not set
CONFIG_SECURITY_FILE_CAPABILITIES=y
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
# CONFIG_SECURITY_SMACK is not set
CONFIG_XOR_BLOCKS=y
CONFIG_ASYNC_CORE=y
CONFIG_ASYNC_MEMCPY=y
CONFIG_ASYNC_XOR=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_RNG=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#
# Ciphers
#
CONFIG_CRYPTO_AES=m
CONFIG_CRYPTO_AES_X86_64=m
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
CONFIG_CRYPTO_SALSA20_X86_64=m
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
CONFIG_CRYPTO_TWOFISH_X86_64=m
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
CONFIG_CRYPTO_DEV_HIFN_795X=m
CONFIG_CRYPTO_DEV_HIFN_795X_RNG=y
CONFIG_HAVE_KVM=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
# CONFIG_KVM_TRACE is not set
CONFIG_VIRTIO=m
CONFIG_VIRTIO_RING=m
CONFIG_VIRTIO_PCI=m
CONFIG_VIRTIO_BALLOON=m
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=m
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=m
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=m
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
[-- Attachment #5: dmesg --]
[-- Type: text/plain, Size: 61091 bytes --]
[ 0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
[ 0.000000] Linux version 2.6.27-andres-04904-gc813b4e (andres@alap2) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu10) ) #29 SMP Mon Oct 20 00:47:28 CEST 2008
[ 0.000000] Command line: root=/dev/mapper/root_crypt rootfstype=ext4dev ro
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000bd4a1000 (usable)
[ 0.000000] BIOS-e820: 00000000bd4a1000 - 00000000bd4a7000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd4a7000 - 00000000bd5b7000 (usable)
[ 0.000000] BIOS-e820: 00000000bd5b7000 - 00000000bd60f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd60f000 - 00000000bd6c6000 (usable)
[ 0.000000] BIOS-e820: 00000000bd6c6000 - 00000000bd6d1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6d1000 - 00000000bd6d4000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd6d4000 - 00000000bd6d8000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6d8000 - 00000000bd6dc000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd6dc000 - 00000000bd6df000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd6df000 - 00000000bd706000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd706000 - 00000000bd708000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd708000 - 00000000bd90f000 (reserved)
[ 0.000000] BIOS-e820: 00000000bd90f000 - 00000000bd99f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bd99f000 - 00000000bd9ff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bd9ff000 - 00000000bda00000 (usable)
[ 0.000000] BIOS-e820: 00000000bdc00000 - 00000000c0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable)
[ 0.000000] DMI present.
[ 0.000000] last_pfn = 0x13c000 max_arch_pfn = 0x3ffffffff
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbda00 max_arch_pfn = 0x3ffffffff
[ 0.000000] init_memory_mapping
[ 0.000000] 0000000000 - 00bda00000 page 2M
[ 0.000000] kernel direct mapping tables up to bda00000 @ 8000-c000
[ 0.000000] last_map_addr: bda00000 end: bda00000
[ 0.000000] init_memory_mapping
[ 0.000000] 0100000000 - 013c000000 page 2M
[ 0.000000] kernel direct mapping tables up to 13c000000 @ a000-10000
[ 0.000000] last_map_addr: 13c000000 end: 13c000000
[ 0.000000] RAMDISK: 36aac000 - 37fef111
[ 0.000000] ACPI: RSDP 000F6550, 0024 (r2 LENOVO)
[ 0.000000] ACPI: XSDT BD96A4DE, 009C (r1 LENOVO TP-6F 1130 LTP 0)
[ 0.000000] ACPI: FACP BD96A600, 00F4 (r3 LENOVO TP-6F 1130 LNVO 1)
[ 0.000000] ACPI: DSDT BD96A9DB, F190 (r1 LENOVO TP-6F 1130 MSFT 3000000)
[ 0.000000] ACPI: FACS BD98E000, 0040
[ 0.000000] ACPI: SSDT BD96A7B4, 0227 (r1 LENOVO TP-6F 1130 MSFT 3000000)
[ 0.000000] ACPI: ECDT BD979B6B, 0052 (r1 LENOVO TP-6F 1130 LNVO 1)
[ 0.000000] ACPI: APIC BD979BBD, 0078 (r1 LENOVO TP-6F 1130 LNVO 1)
[ 0.000000] ACPI: MCFG BD979C35, 003C (r1 LENOVO TP-6F 1130 LNVO 1)
[ 0.000000] ACPI: HPET BD979C71, 0038 (r1 LENOVO TP-6F 1130 LNVO 1)
[ 0.000000] ACPI: SLIC BD979DC2, 0176 (r1 LENOVO TP-6F 1130 LTP 0)
[ 0.000000] ACPI: BOOT BD979F38, 0028 (r1 LENOVO TP-6F 1130 LTP 1)
[ 0.000000] ACPI: ASF! BD979F60, 00A0 (r16 LENOVO TP-6F 1130 PTL 1)
[ 0.000000] ACPI: SSDT BD98D213, 054F (r1 LENOVO TP-6F 1130 INTL 20050513)
[ 0.000000] ACPI: TCPA BD707000, 0032 (r0 0 0)
[ 0.000000] ACPI: DMAR BD706000, 0120 (r1 \x01 1 0)
[ 0.000000] ACPI: SSDT BD6D3000, 0655 (r1 PmRef CpuPm 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT BD6D2000, 0274 (r1 PmRef Cpu0Tst 3000 INTL 20050624)
[ 0.000000] ACPI: SSDT BD6D1000, 0242 (r1 PmRef ApTst 3000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] (7 early reservations) ==> bootmem [0000000000 - 013c000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0000200000 - 000097982c] TEXT DATA BSS ==> [0000200000 - 000097982c]
[ 0.000000] #3 [0036aac000 - 0037fef111] RAMDISK ==> [0036aac000 - 0037fef111]
[ 0.000000] #4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
[ 0.000000] #5 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #6 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f6590] 000f6590
[ 0.000000] [ffffe20000000000-ffffe200045fffff] PMD -> [ffff880028200000-ffff88002c7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013c000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x000bd4a1
[ 0.000000] 0: 0x000bd4a7 -> 0x000bd5b7
[ 0.000000] 0: 0x000bd60f -> 0x000bd6c6
[ 0.000000] 0: 0x000bd9ff -> 0x000bda00
[ 0.000000] 0: 0x00100000 -> 0x0013c000
[ 0.000000] On node 0 totalpages: 1021447
[ 0.000000] DMA zone: 1924 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 757409 pages, LIFO batch:31
[ 0.000000] Normal zone: 242400 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
[ 0.000000] PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000bd4a1000 - 00000000bd4a7000
[ 0.000000] PM: Registered nosave memory: 00000000bd5b7000 - 00000000bd60f000
[ 0.000000] PM: Registered nosave memory: 00000000bd6c6000 - 00000000bd6d1000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d1000 - 00000000bd6d4000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d4000 - 00000000bd6d8000
[ 0.000000] PM: Registered nosave memory: 00000000bd6d8000 - 00000000bd6dc000
[ 0.000000] PM: Registered nosave memory: 00000000bd6dc000 - 00000000bd6df000
[ 0.000000] PM: Registered nosave memory: 00000000bd6df000 - 00000000bd706000
[ 0.000000] PM: Registered nosave memory: 00000000bd706000 - 00000000bd708000
[ 0.000000] PM: Registered nosave memory: 00000000bd708000 - 00000000bd90f000
[ 0.000000] PM: Registered nosave memory: 00000000bd90f000 - 00000000bd99f000
[ 0.000000] PM: Registered nosave memory: 00000000bd99f000 - 00000000bd9ff000
[ 0.000000] PM: Registered nosave memory: 00000000bda00000 - 00000000bdc00000
[ 0.000000] PM: Registered nosave memory: 00000000bdc00000 - 00000000c0000000
[ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec10000
[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed90000
[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff800000
[ 0.000000] PM: Registered nosave memory: 00000000ff800000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000)
[ 0.000000] PERCPU: Allocating 64096 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1001733
[ 0.000000] Kernel command line: root=/dev/mapper/root_crypt rootfstype=ext4dev ro
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2393.765 MHz processor.
[ 0.003333] Console: colour VGA+ 80x25
[ 0.003333] console [tty0] enabled
[ 0.003333] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.003333] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.003333] Checking aperture...
[ 0.003333] No AGP bridge found
[ 0.003333] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.003333] Placing software IO TLB between 0x20000000 - 0x24000000
[ 0.003333] Memory: 3911124k/5177344k available (3704k kernel code, 173756k reserved, 1933k data, 492k init)
[ 0.003333] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.003333] hpet clockevent registered
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.01 BogoMIPS (lpj=7979216)
[ 0.003333] Security Framework initialized
[ 0.003333] Mount-cache hash table entries: 256
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 3072K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 0
[ 0.003333] CPU0: Thermal monitoring enabled (TM2)
[ 0.003333] using mwait in idle threads.
[ 0.003333] ACPI: Core revision 20080609
[ 0.026704] Setting APIC routing to flat
[ 0.027156] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.060691] CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.063330] APIC timer calibration result 16623379
[ 0.063332] Detected 16.623 MHz APIC timer.
[ 0.063506] Booting processor 1/1 ip 6000
[ 0.003333] Initializing CPU#1
[ 0.003333] Calibrating delay using timer specific routine.. 5428.97 BogoMIPS (lpj=9043157)
[ 0.003333] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.003333] CPU: L2 cache: 3072K
[ 0.003333] CPU: Physical Processor ID: 0
[ 0.003333] CPU: Processor Core ID: 1
[ 0.003333] CPU1: Thermal monitoring enabled (TM2)
[ 0.003333] x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
[ 0.158427] CPU1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz stepping 06
[ 0.159592] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.160017] Brought up 2 CPUs
[ 0.160075] Total of 2 processors activated (10217.98 BogoMIPS).
[ 0.160175] CPU0 attaching sched-domain:
[ 0.160177] domain 0: span 0-1 level MC
[ 0.160180] groups: 0 1
[ 0.160184] CPU1 attaching sched-domain:
[ 0.160186] domain 0: span 0-1 level MC
[ 0.160188] groups: 1 0
[ 0.163526] net_namespace: 1752 bytes
[ 0.163588] Booting paravirtualized kernel on bare hardware
[ 0.163920] xor: automatically using best checksumming function: generic_sse
[ 0.176942] generic_sse: 8335.200 MB/sec
[ 0.177003] xor: using function: generic_sse (8335.200 MB/sec)
[ 0.177086] Time: 22:51:32 Date: 10/19/08
[ 0.177184] NET: Registered protocol family 16
[ 0.180904] ACPI: ACPI Dock Station Driver
[ 0.181651] ACPI: \_SB_.PCI0.SATA.PRT1: found ejectable bay
[ 0.181659] ACPI: \_SB_.PCI0.SATA.PRT1: Adding notify handler
[ 0.181713] ACPI: Bay [\_SB_.PCI0.SATA.PRT1] Added
[ 0.182222] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.182316] ACPI: bus type pci registered
[ 0.182497] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
[ 0.182564] PCI: MCFG area at e0000000 reserved in E820
[ 0.195567] PCI: Using MMCONFIG at e0000000 - e3ffffff
[ 0.195630] PCI: Using configuration type 1 for base access
[ 0.199348] ACPI: EC: EC description table is found, configuring boot EC
[ 0.214948] ACPI: BIOS _OSI(Linux) query ignored
[ 0.215011] ACPI: DMI System Vendor: LENOVO
[ 0.215072] ACPI: DMI Product Name: 208252G
[ 0.215132] ACPI: DMI Product Version: ThinkPad T500
[ 0.215194] ACPI: DMI Board Name: 208252G
[ 0.215254] ACPI: DMI BIOS Vendor: LENOVO
[ 0.215315] ACPI: DMI BIOS Date: 08/19/2008
[ 0.215375] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[ 0.215440] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[ 0.216669] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.253706] ACPI: Interpreter enabled
[ 0.253767] ACPI: (supports S0 S3 S4 S5)
[ 0.253961] ACPI: Using IOAPIC for interrupt routing
[ 0.300788] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[ 0.300854] ACPI: EC: driver started in interrupt mode
[ 0.300979] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.301172] PCI: 0000:00:02.0 reg 10 64bit mmio: [f4400000, f47fffff]
[ 0.301180] PCI: 0000:00:02.0 reg 18 32bit mmio: [d0000000, dfffffff]
[ 0.301189] PCI: 0000:00:02.0 reg 20 io port: [1800, 1807]
[ 0.301227] PCI: 0000:00:02.1 reg 10 64bit mmio: [f4200000, f42fffff]
[ 0.301289] PCI: 0000:00:03.0 reg 10 64bit mmio: [fc226800, fc22680f]
[ 0.301324] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[ 0.301391] pci 0000:00:03.0: PME# disabled
[ 0.301535] PCI: 0000:00:19.0 reg 10 32bit mmio: [fc000000, fc01ffff]
[ 0.301545] PCI: 0000:00:19.0 reg 14 32bit mmio: [fc025000, fc025fff]
[ 0.301554] PCI: 0000:00:19.0 reg 18 io port: [1840, 185f]
[ 0.301599] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.301666] pci 0000:00:19.0: PME# disabled
[ 0.301780] PCI: 0000:00:1a.0 reg 20 io port: [1860, 187f]
[ 0.301862] PCI: 0000:00:1a.1 reg 20 io port: [1880, 189f]
[ 0.301945] PCI: 0000:00:1a.2 reg 20 io port: [18a0, 18bf]
[ 0.302030] PCI: 0000:00:1a.7 reg 10 32bit mmio: [fc226c00, fc226fff]
[ 0.302092] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.302160] pci 0000:00:1a.7: PME# disabled
[ 0.302262] PCI: 0000:00:1b.0 reg 10 64bit mmio: [fc020000, fc023fff]
[ 0.302311] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.302378] pci 0000:00:1b.0: PME# disabled
[ 0.302501] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.302567] pci 0000:00:1c.0: PME# disabled
[ 0.302689] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.302756] pci 0000:00:1c.1: PME# disabled
[ 0.302879] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.302946] pci 0000:00:1c.3: PME# disabled
[ 0.303067] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.303323] pci 0000:00:1c.4: PME# disabled
[ 0.303441] PCI: 0000:00:1d.0 reg 20 io port: [18c0, 18df]
[ 0.303524] PCI: 0000:00:1d.1 reg 20 io port: [18e0, 18ff]
[ 0.303607] PCI: 0000:00:1d.2 reg 20 io port: [1c00, 1c1f]
[ 0.303695] PCI: 0000:00:1d.7 reg 10 32bit mmio: [fc227000, fc2273ff]
[ 0.303757] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.303825] pci 0000:00:1d.7: PME# disabled
[ 0.304079] PCI: 0000:00:1f.2 reg 10 io port: [1c48, 1c4f]
[ 0.304088] PCI: 0000:00:1f.2 reg 14 io port: [183c, 183f]
[ 0.304097] PCI: 0000:00:1f.2 reg 18 io port: [1c40, 1c47]
[ 0.304106] PCI: 0000:00:1f.2 reg 1c io port: [1838, 183b]
[ 0.304115] PCI: 0000:00:1f.2 reg 20 io port: [1c20, 1c3f]
[ 0.304124] PCI: 0000:00:1f.2 reg 24 32bit mmio: [fc226000, fc2267ff]
[ 0.304157] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.304222] pci 0000:00:1f.2: PME# disabled
[ 0.304305] PCI: 0000:00:1f.3 reg 10 64bit mmio: [fc227400, fc2274ff]
[ 0.304325] PCI: 0000:00:1f.3 reg 20 io port: [1c60, 1c7f]
[ 0.304521] PCI: 0000:03:00.0 reg 10 64bit mmio: [f4300000, f4301fff]
[ 0.304640] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.304731] pci 0000:03:00.0: PME# disabled
[ 0.304839] PCI: bridge 0000:00:1c.1 32bit mmio: [f4300000, f43fffff]
[ 0.304900] PCI: bridge 0000:00:1c.3 io port: [2000, 2fff]
[ 0.304906] PCI: bridge 0000:00:1c.3 32bit mmio: [f8000000, f9ffffff]
[ 0.304916] PCI: bridge 0000:00:1c.3 64bit mmio pref: [f4000000, f40fffff]
[ 0.304973] PCI: bridge 0000:00:1c.4 io port: [3000, 3fff]
[ 0.304979] PCI: bridge 0000:00:1c.4 32bit mmio: [fa000000, fbffffff]
[ 0.304989] PCI: bridge 0000:00:1c.4 64bit mmio pref: [f4100000, f41fffff]
[ 0.305037] PCI: 0000:15:00.0 reg 10 32bit mmio: [f4800000, f4800fff]
[ 0.305059] pci 0000:15:00.0: supports D1
[ 0.305062] pci 0000:15:00.0: supports D2
[ 0.305065] pci 0000:15:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305134] pci 0000:15:00.0: PME# disabled
[ 0.305233] PCI: 0000:15:00.1 reg 10 32bit mmio: [f4801000, f48017ff]
[ 0.305295] pci 0000:15:00.1: supports D1
[ 0.305298] pci 0000:15:00.1: supports D2
[ 0.305301] pci 0000:15:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305370] pci 0000:15:00.1: PME# disabled
[ 0.305469] PCI: 0000:15:00.2 reg 10 32bit mmio: [f4801800, f48018ff]
[ 0.305531] pci 0000:15:00.2: supports D1
[ 0.305534] pci 0000:15:00.2: supports D2
[ 0.305537] pci 0000:15:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305605] pci 0000:15:00.2: PME# disabled
[ 0.305704] PCI: 0000:15:00.3 reg 10 32bit mmio: [f4801c00, f4801cff]
[ 0.305766] pci 0000:15:00.3: supports D1
[ 0.305769] pci 0000:15:00.3: supports D2
[ 0.305772] pci 0000:15:00.3: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.305841] pci 0000:15:00.3: PME# disabled
[ 0.305939] PCI: 0000:15:00.4 reg 10 32bit mmio: [f4802000, f48020ff]
[ 0.306001] pci 0000:15:00.4: supports D1
[ 0.306003] pci 0000:15:00.4: supports D2
[ 0.306007] pci 0000:15:00.4: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306075] pci 0000:15:00.4: PME# disabled
[ 0.306174] PCI: 0000:15:00.5 reg 10 32bit mmio: [f4802400, f48024ff]
[ 0.306235] pci 0000:15:00.5: supports D1
[ 0.306238] pci 0000:15:00.5: supports D2
[ 0.306241] pci 0000:15:00.5: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.306310] pci 0000:15:00.5: PME# disabled
[ 0.306431] pci 0000:00:1e.0: transparent bridge
[ 0.306494] PCI: bridge 0000:00:1e.0 io port: [4000, 7fff]
[ 0.306501] PCI: bridge 0000:00:1e.0 32bit mmio: [f4800000, f7ffffff]
[ 0.306510] PCI: bridge 0000:00:1e.0 64bit mmio pref: [f0000000, f3ffffff]
[ 0.306565] bus 00 -> node 0
[ 0.306576] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.307389] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[ 0.307848] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.308308] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.308770] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP4._PRT]
[ 0.309231] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
[ 0.320617] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.321629] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.322639] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.323660] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.324681] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.325689] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.326708] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.327725] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[ 0.328296] ACPI: Power Resource [PUBS] (on)
[ 0.328296] ACPI: WMI: Mapper loaded
[ 0.328296] SCSI subsystem initialized
[ 0.330017] libata version 3.00 loaded.
[ 0.330241] PCI: Using ACPI for IRQ routing
[ 0.346668] NetLabel: Initializing
[ 0.346728] NetLabel: domain hash size = 128
[ 0.346789] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.346871] NetLabel: unlabeled traffic allowed by default
[ 0.346967] PCI-GART: No AMD northbridge found.
[ 0.347037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.347236] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.350862] tracer: 1286 pages allocated for 65536 entries of 80 bytes
[ 0.350928] actual entries 65586
[ 0.359981] pnp: PnP ACPI init
[ 0.360054] ACPI: bus type pnp registered
[ 0.429449] pnp: PnP ACPI: found 12 devices
[ 0.429512] ACPI: ACPI bus type pnp unregistered
[ 0.429585] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.429650] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[ 0.429716] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[ 0.429782] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[ 0.429848] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[ 0.429913] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[ 0.429991] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[ 0.430057] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[ 0.430124] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[ 0.430190] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[ 0.430257] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[ 0.430323] system 00:00: iomem range 0x100000-0xbfffffff could not be reserved
[ 0.430416] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[ 0.430509] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[ 0.430610] system 00:02: ioport range 0x164e-0x164f has been reserved
[ 0.430676] system 00:02: ioport range 0x1000-0x107f has been reserved
[ 0.430742] system 00:02: ioport range 0x1180-0x11ff has been reserved
[ 0.430807] system 00:02: ioport range 0x800-0x80f has been reserved
[ 0.430872] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[ 0.430938] system 00:02: ioport range 0x1600-0x1641 has been reserved
[ 0.431003] system 00:02: ioport range 0x1600-0x161b has been reserved
[ 0.431069] system 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
[ 0.431163] system 00:02: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 0.431256] system 00:02: iomem range 0xfed10000-0xfed13fff could not be reserved
[ 0.431350] system 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 0.431444] system 00:02: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 0.431538] system 00:02: iomem range 0xfed45000-0xfed4bfff could not be reserved
[ 0.437473] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.437538] pci 0000:00:1c.0: IO window: disabled
[ 0.437604] pci 0000:00:1c.0: MEM window: disabled
[ 0.437669] pci 0000:00:1c.0: PREFETCH window: disabled
[ 0.437737] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.437801] pci 0000:00:1c.1: IO window: disabled
[ 0.437867] pci 0000:00:1c.1: MEM window: 0xf4300000-0xf43fffff
[ 0.437933] pci 0000:00:1c.1: PREFETCH window: disabled
[ 0.438001] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.438067] pci 0000:00:1c.3: IO window: 0x2000-0x2fff
[ 0.438133] pci 0000:00:1c.3: MEM window: 0xf8000000-0xf9ffffff
[ 0.438200] pci 0000:00:1c.3: PREFETCH window: 0x000000f4000000-0x000000f40fffff
[ 0.438298] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:0d
[ 0.438363] pci 0000:00:1c.4: IO window: 0x3000-0x3fff
[ 0.438430] pci 0000:00:1c.4: MEM window: 0xfa000000-0xfbffffff
[ 0.438497] pci 0000:00:1c.4: PREFETCH window: 0x000000f4100000-0x000000f41fffff
[ 0.438600] pci 0000:15:00.0: CardBus bridge, secondary bus 0000:16
[ 0.438665] pci 0000:15:00.0: IO window: 0x004000-0x0040ff
[ 0.438732] pci 0000:15:00.0: IO window: 0x004400-0x0044ff
[ 0.438799] pci 0000:15:00.0: PREFETCH window: 0xf0000000-0xf3ffffff
[ 0.438867] pci 0000:15:00.0: MEM window: 0xc4000000-0xc7ffffff
[ 0.438935] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:15
[ 0.439000] pci 0000:00:1e.0: IO window: 0x4000-0x7fff
[ 0.439067] pci 0000:00:1e.0: MEM window: 0xf4800000-0xf7ffffff
[ 0.439134] pci 0000:00:1e.0: PREFETCH window: 0x000000f0000000-0x000000f3ffffff
[ 0.439243] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.439312] pci 0000:00:1c.0: setting latency timer to 64
[ 0.439324] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 0.439392] pci 0000:00:1c.1: setting latency timer to 64
[ 0.439404] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 0.439472] pci 0000:00:1c.3: setting latency timer to 64
[ 0.439482] pci 0000:00:1c.4: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 0.439549] pci 0000:00:1c.4: setting latency timer to 64
[ 0.439559] pci 0000:00:1e.0: setting latency timer to 64
[ 0.439573] pci 0000:15:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.439642] bus: 00 index 0 io port: [0, ffff]
[ 0.439714] bus: 00 index 1 mmio: [0, ffffffffffffffff]
[ 0.439777] bus: 02 index 0 mmio: [0, 0]
[ 0.439837] bus: 02 index 1 mmio: [0, 0]
[ 0.440440] bus: 02 index 2 mmio: [0, 0]
[ 0.440500] bus: 02 index 3 mmio: [0, 0]
[ 0.440560] bus: 03 index 0 mmio: [0, 0]
[ 0.440620] bus: 03 index 1 mmio: [f4300000, f43fffff]
[ 0.440683] bus: 03 index 2 mmio: [0, 0]
[ 0.440743] bus: 03 index 3 mmio: [0, 0]
[ 0.440803] bus: 05 index 0 io port: [2000, 2fff]
[ 0.440865] bus: 05 index 1 mmio: [f8000000, f9ffffff]
[ 0.440927] bus: 05 index 2 mmio: [f4000000, f40fffff]
[ 0.440989] bus: 05 index 3 mmio: [0, 0]
[ 0.441050] bus: 0d index 0 io port: [3000, 3fff]
[ 0.441111] bus: 0d index 1 mmio: [fa000000, fbffffff]
[ 0.441173] bus: 0d index 2 mmio: [f4100000, f41fffff]
[ 0.441235] bus: 0d index 3 mmio: [0, 0]
[ 0.441296] bus: 15 index 0 io port: [4000, 7fff]
[ 0.441358] bus: 15 index 1 mmio: [f4800000, f7ffffff]
[ 0.441420] bus: 15 index 2 mmio: [f0000000, f3ffffff]
[ 0.441483] bus: 15 index 3 io port: [0, ffff]
[ 0.441544] bus: 15 index 4 mmio: [0, ffffffffffffffff]
[ 0.441607] bus: 16 index 0 io port: [4000, 40ff]
[ 0.441669] bus: 16 index 1 io port: [4400, 44ff]
[ 0.441730] bus: 16 index 2 mmio: [f0000000, f3ffffff]
[ 0.441793] bus: 16 index 3 mmio: [c4000000, c7ffffff]
[ 0.441864] NET: Registered protocol family 2
[ 0.473082] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.473744] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 0.475435] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.475983] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.476050] TCP reno registered
[ 0.483152] NET: Registered protocol family 1
[ 0.483365] checking if image is initramfs...<7>Switched to high resolution mode on CPU 1
[ 0.546643] Switched to high resolution mode on CPU 0
[ 1.370243] it is
[ 2.306792] Freeing initrd memory: 21772k freed
[ 2.318708] Simple Boot Flag at 0x35 set to 0x1
[ 2.319508] audit: initializing netlink socket (disabled)
[ 2.319578] type=2000 audit(1224456694.317:1): initialized
[ 2.319963] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.321825] VFS: Disk quotas dquot_6.5.1
[ 2.321948] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.322531] fuse init (API version 7.9)
[ 2.322717] msgmni has been set to 7683
[ 2.322921] alg: No test for stdrng (krng)
[ 2.322992] async_tx: api initialized (async)
[ 2.323052] io scheduler noop registered
[ 2.323110] io scheduler anticipatory registered
[ 2.323168] io scheduler deadline registered
[ 2.323273] io scheduler cfq registered (default)
[ 2.323351] pci 0000:00:02.0: Boot video device
[ 2.323588] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 2.323625] pcieport-driver 0000:00:1c.0: found MSI capability
[ 2.323724] pci_express 0000:00:1c.0:pcie00: allocate port service
[ 2.323762] pci_express 0000:00:1c.0:pcie02: allocate port service
[ 2.323793] pci_express 0000:00:1c.0:pcie03: allocate port service
[ 2.323875] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 2.323911] pcieport-driver 0000:00:1c.1: found MSI capability
[ 2.324005] pci_express 0000:00:1c.1:pcie00: allocate port service
[ 2.324036] pci_express 0000:00:1c.1:pcie02: allocate port service
[ 2.324065] pci_express 0000:00:1c.1:pcie03: allocate port service
[ 2.324150] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 2.324185] pcieport-driver 0000:00:1c.3: found MSI capability
[ 2.324279] pci_express 0000:00:1c.3:pcie00: allocate port service
[ 2.324311] pci_express 0000:00:1c.3:pcie02: allocate port service
[ 2.324340] pci_express 0000:00:1c.3:pcie03: allocate port service
[ 2.324424] pcieport-driver 0000:00:1c.4: setting latency timer to 64
[ 2.324460] pcieport-driver 0000:00:1c.4: found MSI capability
[ 2.324554] pci_express 0000:00:1c.4:pcie00: allocate port service
[ 2.324586] pci_express 0000:00:1c.4:pcie02: allocate port service
[ 2.324615] pci_express 0000:00:1c.4:pcie03: allocate port service
[ 2.324744] vmlfb: initializing
[ 2.324777] Could not find Carillo Ranch MCH device.
[ 2.324950] vga16fb: initializing
[ 2.324952] vga16fb: mapped to 0xffff8800000a0000
[ 2.325055] fb0: VGA16 VGA frame buffer device
[ 2.325810] ACPI: AC Adapter [AC] (on-line)
[ 2.363580] ACPI: Battery Slot [BAT0] (battery present)
[ 2.363773] input: Power Button (FF) as /class/input/input0
[ 2.363835] ACPI: Power Button (FF) [PWRF]
[ 2.363982] input: Lid Switch as /class/input/input1
[ 2.368334] ACPI: Lid Switch [LID]
[ 2.368446] input: Sleep Button (CM) as /class/input/input2
[ 2.368509] ACPI: Sleep Button (CM) [SLPB]
[ 2.369156] ACPI: SSDT BD6D6C20, 02C8 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 2.369904] ACPI: SSDT BD6D4020, 087A (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 2.372616] Monitor-Mwait will be used to enter C-1 state
[ 2.372619] Monitor-Mwait will be used to enter C-2 state
[ 2.372621] Monitor-Mwait will be used to enter C-3 state
[ 2.372654] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 2.372848] processor ACPI0007:00: registered as cooling_device0
[ 2.372911] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 2.373467] ACPI: SSDT BD6D5CA0, 01CF (r1 PmRef ApIst 3000 INTL 20050624)
[ 2.374109] ACPI: SSDT BD6D5F20, 008D (r1 PmRef ApCst 3000 INTL 20050624)
[ 2.375675] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 2.375868] processor ACPI0007:01: registered as cooling_device1
[ 2.375930] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 2.419066] thermal LNXTHERM:01: registered as thermal_zone0
[ 2.421783] ACPI: Thermal Zone [THM0] (49 C)
[ 2.422767] thermal LNXTHERM:02: registered as thermal_zone1
[ 2.424027] ACPI: Thermal Zone [THM1] (48 C)
[ 2.470202] Linux agpgart interface v0.103
[ 2.470284] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset
[ 2.471449] agpgart-intel 0000:00:00.0: detected 32252K stolen memory
[ 2.481619] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.481727] Hangcheck: starting hangcheck timer 0.9.0 (tick is 180 seconds, margin is 60 seconds).
[ 2.481818] Hangcheck: Using get_cycles().
[ 2.481877] intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets
[ 2.481970] intelfb: Version 0.9.6
[ 2.482064] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.482262] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.482987] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.484247] brd: module loaded
[ 2.484329] console [netcon0] enabled
[ 2.484387] netconsole: network logging started
[ 2.484462] ahci 0000:00:1f.2: version 3.0
[ 2.484474] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.484620] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 2.484710] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part
[ 2.484802] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.484910] scsi0 : ahci
[ 2.485052] scsi1 : ahci
[ 2.485163] scsi2 : ahci
[ 2.485275] scsi3 : ahci
[ 2.486079] ata1: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226100 irq 2299
[ 2.486169] ata2: SATA max UDMA/133 abar m2048@0xfc226000 port 0xfc226180 irq 2299
[ 2.486258] ata3: DUMMY
[ 2.486313] ata4: DUMMY
[ 2.803351] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.805190] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.805192] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.805253] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.806947] ata1.00: ATA-8: WDC WD3200BEKT-22F3T0, 11.01A11, max UDMA/133
[ 2.807009] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.808886] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 2.808888] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 2.808948] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 2.810632] ata1.00: configured for UDMA/133
[ 2.826652] ata1.00: configured for UDMA/133
[ 2.826715] ata1: EH complete
[ 3.146680] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 3.148959] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3.148961] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.149022] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.149886] ata2.00: ATA-8: Hitachi HTS722020K9SA00, DC4OC54P, max UDMA/133
[ 3.149948] ata2.00: 390721968 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.152355] ata2.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[ 3.152358] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[ 3.152418] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[ 3.153284] ata2.00: configured for UDMA/133
[ 3.168474] ata2.00: configured for UDMA/133
[ 3.168533] ata2: EH complete
[ 3.168700] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-2 11.0 PQ: 0 ANSI: 5
[ 3.168927] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS72202 DC4O PQ: 0 ANSI: 5
[ 3.169280] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[ 3.177782] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.177844] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.178026] mice: PS/2 mouse device common for all mice
[ 3.178141] rtc_cmos 00:07: RTC can wake from S4
[ 3.178251] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 3.178335] rtc0: alarms up to one month, y3k, hpet irqs
[ 3.178421] md: linear personality registered for level -1
[ 3.178481] md: raid0 personality registered for level 0
[ 3.178540] md: raid1 personality registered for level 1
[ 3.178599] md: raid10 personality registered for level 10
[ 3.233333] raid6: int64x1 2171 MB/s
[ 3.290003] raid6: int64x2 2932 MB/s
[ 3.346680] raid6: int64x4 2760 MB/s
[ 3.403339] raid6: int64x8 1964 MB/s
[ 3.460003] raid6: sse2x1 3732 MB/s
[ 3.516675] raid6: sse2x2 4305 MB/s
[ 3.573331] raid6: sse2x4 6814 MB/s
[ 3.573388] raid6: using algorithm sse2x4 (6814 MB/s)
[ 3.573448] md: raid6 personality registered for level 6
[ 3.573507] md: raid5 personality registered for level 5
[ 3.573566] md: raid4 personality registered for level 4
[ 3.573626] md: multipath personality registered for level -4
[ 3.573686] md: faulty personality registered for level -5
[ 3.574072] device-mapper: uevent: version 1.0.3
[ 3.574228] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[ 3.574438] device-mapper: multipath: version 1.0.5 loaded
[ 3.574498] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 3.574777] cpuidle: using governor ladder
[ 3.575197] cpuidle: using governor menu
[ 3.575311] Netfilter messages via NETLINK v0.30.
[ 3.575587] TCP cubic registered
[ 3.575780] registered taskstats version 1
[ 3.575954] Magic number: 12:127:907
[ 3.576063] tty ptyz3: hash matches
[ 3.576203] rtc_cmos 00:07: setting system clock to 2008-10-19 22:51:36 UTC (1224456696)
[ 3.576366] Marking TSC unstable due to TSC halts in idle
[ 3.576381] Freeing unused kernel memory: 492k freed
[ 3.576538] Write protecting the kernel read-only data: 1596k
[ 3.579456] input: AT Translated Set 2 keyboard as /class/input/input3
[ 4.129246] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[ 4.129317] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[ 4.129419] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.129492] e1000e 0000:00:19.0: setting latency timer to 64
[ 4.158524] usbcore: registered new interface driver usbfs
[ 4.158607] usbcore: registered new interface driver hub
[ 4.158701] usbcore: registered new device driver usb
[ 4.170381] USB Universal Host Controller Interface driver v3.0
[ 4.196318] firewire_ohci 0000:15:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 4.205026] Driver 'sd' needs updating - please use bus_type methods
[ 4.205190] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
[ 4.205303] sd 0:0:0:0: [sda] Write Protect is off
[ 4.205366] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.205397] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.205554] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320GB/298GiB)
[ 4.205658] sd 0:0:0:0: [sda] Write Protect is off
[ 4.205718] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.205747] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.205840] sda:<6>0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:21:86:60:5d:d6
[ 4.229251] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[ 4.229333] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff
[ 4.230109] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[ 4.230176] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[ 4.230246] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.230250] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.230343] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 4.230466] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[ 4.230665] usb usb1: configuration #1 chosen from 1 choice
[ 4.230750] hub 1-0:1.0: USB hub found
[ 4.230815] hub 1-0:1.0: 2 ports detected
[ 4.243673] sda1 sda2 sda3
[ 4.244207] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.244335] sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200GB/186GiB)
[ 4.244437] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.244493] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.244523] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.244660] sd 1:0:0:0: [sdb] 390721968 512-byte hardware sectors: (200GB/186GiB)
[ 4.244760] sd 1:0:0:0: [sdb] Write Protect is off
[ 4.244817] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 4.244846] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.244935] sdb:<5>firewire_ohci: Added fw-ohci device 0000:15:00.1, OHCI version 1.10
[ 4.333541] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.333610] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.333698] usb usb1: Product: UHCI Host Controller
[ 4.333756] usb usb1: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e uhci_hcd
[ 4.333844] usb usb1: SerialNumber: 0000:00:1a.0
[ 4.335662] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[ 4.335735] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.335810] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.335813] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.335893] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 2
[ 4.339886] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.339948] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.339960] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xfc226c00
[ 4.353399] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.353571] usb usb2: configuration #1 chosen from 1 choice
[ 4.353650] hub 2-0:1.0: USB hub found
[ 4.353711] hub 2-0:1.0: 6 ports detected
[ 4.500062] Clocksource tsc unstable (delta = -255335965 ns)
[ 4.560134] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.560196] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.560289] usb usb2: Product: EHCI Host Controller
[ 4.560348] usb usb2: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e ehci_hcd
[ 4.560436] usb usb2: SerialNumber: 0000:00:1a.7
[ 4.560512] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.560578] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.560581] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.560655] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[ 4.560769] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[ 4.560896] usb usb3: configuration #1 chosen from 1 choice
[ 4.560973] hub 3-0:1.0: USB hub found
[ 4.561034] hub 3-0:1.0: 2 ports detected
[ 4.591351] sdb1 sdb2 sdb3
[ 4.591601] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 4.595749] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.595847] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.766871] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.766943] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.767031] usb usb3: Product: UHCI Host Controller
[ 4.767089] usb usb3: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e uhci_hcd
[ 4.767177] usb usb3: SerialNumber: 0000:00:1a.1
[ 4.768316] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[ 4.768387] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.768464] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.768467] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.768545] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 4.770511] firewire_core: created device fw0: GUID 00061b032a2f5b28, S400
[ 4.772539] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.772601] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.772615] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfc227000
[ 4.880070] usb 2-5: new high speed USB device using ehci_hcd and address 4
[ 4.884276] Monitor-Mwait will be used to enter C-3 state
[ 4.890463] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 4.890593] usb usb4: configuration #1 chosen from 1 choice
[ 4.890616] hub 4-0:1.0: USB hub found
[ 4.890624] hub 4-0:1.0: 6 ports detected
[ 5.013794] usb 2-5: configuration #1 chosen from 1 choice
[ 5.014192] hub 2-5:1.0: USB hub found
[ 5.014321] hub 2-5:1.0: 4 ports detected
[ 5.096871] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 5.096874] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.096877] usb usb4: Product: EHCI Host Controller
[ 5.096879] usb usb4: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e ehci_hcd
[ 5.096881] usb usb4: SerialNumber: 0000:00:1d.7
[ 5.098539] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[ 5.098549] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[ 5.098557] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.098560] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.098585] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 5.098618] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[ 5.098704] usb usb5: configuration #1 chosen from 1 choice
[ 5.098724] hub 5-0:1.0: USB hub found
[ 5.098730] hub 5-0:1.0: 2 ports detected
[ 5.120708] usb 2-5: New USB device found, idVendor=04b3, idProduct=4485
[ 5.120710] usb 2-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.226741] usb 3-1: new full speed USB device using uhci_hcd and address 2
[ 5.303536] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.303539] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.303541] usb usb5: Product: UHCI Host Controller
[ 5.303544] usb usb5: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e uhci_hcd
[ 5.303546] usb usb5: SerialNumber: 0000:00:1a.2
[ 5.304620] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[ 5.304629] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.304637] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.304641] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.304679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 5.304712] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[ 5.304786] usb usb6: configuration #1 chosen from 1 choice
[ 5.304807] hub 6-0:1.0: USB hub found
[ 5.304812] hub 6-0:1.0: 2 ports detected
[ 5.385975] usb 3-1: configuration #1 chosen from 1 choice
[ 5.388068] usb 3-1: New USB device found, idVendor=08ff, idProduct=2810
[ 5.388071] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 5.388074] usb 3-1: Product: Fingerprint Sensor
[ 5.510205] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.510208] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.510211] usb usb6: Product: UHCI Host Controller
[ 5.510213] usb usb6: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e uhci_hcd
[ 5.510215] usb usb6: SerialNumber: 0000:00:1d.0
[ 5.510243] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 5.510248] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.510250] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.510265] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 5.510286] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[ 5.510355] usb usb7: configuration #1 chosen from 1 choice
[ 5.510373] hub 7-0:1.0: USB hub found
[ 5.510377] hub 7-0:1.0: 2 ports detected
[ 5.613397] usb 3-2: new full speed USB device using uhci_hcd and address 3
[ 5.716807] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.716810] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.716813] usb usb7: Product: UHCI Host Controller
[ 5.716815] usb usb7: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e uhci_hcd
[ 5.716817] usb usb7: SerialNumber: 0000:00:1d.1
[ 5.716843] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.716854] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.716857] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.716872] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 5.716899] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[ 5.716964] usb usb8: configuration #1 chosen from 1 choice
[ 5.716982] hub 8-0:1.0: USB hub found
[ 5.716987] hub 8-0:1.0: 2 ports detected
[ 5.774976] usb 3-2: configuration #1 chosen from 1 choice
[ 5.777186] usb 3-2: New USB device found, idVendor=0a5c, idProduct=2145
[ 5.777188] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.777190] usb 3-2: Product: ThinkPad Bluetooth with Enhanced Data Rate II
[ 5.777191] usb 3-2: Manufacturer: Lenovo Computer Corp
[ 5.820206] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 5.820209] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.820212] usb usb8: Product: UHCI Host Controller
[ 5.820214] usb usb8: Manufacturer: Linux 2.6.27-andres-04904-gc813b4e uhci_hcd
[ 5.820216] usb usb8: SerialNumber: 0000:00:1d.2
[ 5.883418] usb 4-2: new high speed USB device using ehci_hcd and address 2
[ 6.008876] usb 4-2: configuration #1 chosen from 1 choice
[ 6.009498] usb 4-2: New USB device found, idVendor=2040, idProduct=9301
[ 6.009500] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.009502] usb 4-2: Product: SOHO-FX2
[ 6.009503] usb 4-2: Manufacturer: Hauppau??
[ 6.009505] usb 4-2: SerialNumber: 9301-00-F007422D
[ 6.113410] usb 4-4: new high speed USB device using ehci_hcd and address 3
[ 6.317856] usb 4-4: configuration #1 chosen from 2 choices
[ 6.360993] usb 4-4: New USB device found, idVendor=0bdb, idProduct=1900
[ 6.360995] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.360997] usb 4-4: Product: Ericsson F3507g Mobile Broadband Minicard Composite Device
[ 6.360999] usb 4-4: Manufacturer: Ericsson
[ 6.361000] usb 4-4: SerialNumber: 3541430202682800
[ 11.294543] PM: Starting manual resume from disk
[ 11.294603] PM: Resume from partition 253:1
[ 11.294605] PM: Checking hibernation image.
[ 11.294795] PM: Resume from disk failed.
[ 11.297557] EXT4-fs: Update your userspace programs to mount using ext4
[ 11.297620] EXT4-fs: ext4dev backwards compatibility will go away by 2.6.31
[ 11.401128] EXT4-fs: barriers enabled
[ 11.413286] kjournald2 starting. Commit interval 5 seconds
[ 11.413382] EXT4-fs: mounted filesystem with ordered data mode.
[ 11.413447] EXT4-fs: delayed allocation enabled
[ 11.413506] EXT4-fs: file extents enabled
[ 11.454727] EXT4-fs: mballoc enabled
[ 18.517990] udevd version 124 started
[ 18.875759] Non-volatile memory driver v1.2
[ 19.206068] thinkpad_acpi: ThinkPad ACPI Extras v0.21
[ 19.206134] thinkpad_acpi: http://ibm-acpi.sf.net/
[ 19.206193] thinkpad_acpi: ThinkPad BIOS 6FET43WW (1.13 ), EC 7VHT12WW-1.01
[ 19.206255] thinkpad_acpi: Lenovo ThinkPad T500, model 208252G
[ 19.208675] thinkpad_acpi: radio switch found; radios are enabled
[ 19.208847] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[ 19.208942] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[ 19.287763] acpi device:03: registered as cooling_device2
[ 19.288033] input: Video Bus as /class/input/input4
[ 19.322745] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 19.324190] acpi device:0a: registered as cooling_device3
[ 19.324419] input: Video Bus as /class/input/input5
[ 19.331085] Registered led device: tpacpi::thinklight
[ 19.331199] Registered led device: tpacpi::power
[ 19.331271] Registered led device: tpacpi:orange:batt
[ 19.331340] Registered led device: tpacpi:green:batt
[ 19.331433] Registered led device: tpacpi::dock_active
[ 19.331504] Registered led device: tpacpi::bay_active
[ 19.331574] Registered led device: tpacpi::dock_batt
[ 19.331644] Registered led device: tpacpi::unknown_led
[ 19.332260] Registered led device: tpacpi::standby
[ 19.350561] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 19.374580] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 19.375192] thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
[ 19.375281] thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
[ 19.375682] input: ThinkPad Extra Buttons as /class/input/input6
[ 19.446240] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 19.665737] sdhci: Secure Digital Host Controller Interface driver
[ 19.665817] sdhci: Copyright(c) Pierre Ossman
[ 19.749199] yenta_cardbus 0000:15:00.0: CardBus bridge found [17aa:20c6]
[ 19.761022] ricoh-mmc: Ricoh MMC Controller disabling driver
[ 19.761085] ricoh-mmc: Copyright(c) Philip Langdale
[ 19.876889] yenta_cardbus 0000:15:00.0: ISA IRQ mask 0x0cb8, PCI irq 16
[ 19.876957] yenta_cardbus 0000:15:00.0: Socket status: 30000006
[ 19.877019] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge I/O window: 0x4000 - 0x7fff
[ 19.877115] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf4800000 - 0xf7ffffff
[ 19.877206] yenta_cardbus 0000:15:00.0: pcmcia: parent PCI bridge Memory window: 0xf0000000 - 0xf3ffffff
[ 19.877489] ricoh-mmc: Ricoh MMC controller found at 0000:15:00.3 [1180:0843] (rev 11)
[ 19.877599] ricoh-mmc: Controller is now disabled.
[ 19.947411] cfg80211: Calling CRDA to update world regulatory domain
[ 19.979038] sdhci-pci 0000:15:00.2: SDHCI controller found [1180:0822] (rev 21)
[ 19.979162] sdhci-pci 0000:15:00.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 19.980411] sdhci-pci 0000:15:00.2: Will use DMA mode even though HW doesn't fully claim to support it.
[ 19.982840] mmc0: SDHCI controller on PCI [0000:15:00.2] using DMA
[ 20.201410] Bluetooth: Core ver 2.13
[ 20.201543] NET: Registered protocol family 31
[ 20.201602] Bluetooth: HCI device and connection manager initialized
[ 20.201666] Bluetooth: HCI socket layer initialized
[ 20.240256] cdc_acm 4-4:1.1: ttyACM0: USB ACM device
[ 20.242542] cdc_acm 4-4:1.3: ttyACM1: USB ACM device
[ 20.243315] cdc_acm 4-4:1.9: ttyACM2: USB ACM device
[ 20.243877] usbcore: registered new interface driver cdc_acm
[ 20.243947] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
[ 20.399476] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 20.399634] usbcore: registered new interface driver btusb
[ 20.536072] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000
[ 20.536175] serio: Synaptics pass-through port at isa0060/serio1/input0
[ 20.583963] input: SynPS/2 Synaptics TouchPad as /class/input/input7
[ 20.996995] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[ 20.997108] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[ 20.997331] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 20.997423] iwlagn 0000:03:00.0: setting latency timer to 64
[ 20.997472] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[ 21.029190] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[ 21.029623] iwlagn 0000:03:00.0: PCI INT A disabled
[ 21.029982] phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 21.098214] dvb-usb: found a 'Hauppauge WinTV-NOVA-T usb2' in warm state.
[ 21.100183] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 21.102292] DVB: registering new adapter (Hauppauge WinTV-NOVA-T usb2)
[ 21.103492] dvb-usb: MAC address: 00:0d:fe:07:42:2d
[ 21.105121] DVB: registering frontend 0 (DiBcom 3000MC/P)...
[ 21.379189] input: IR-receiver inside an USB DVB receiver as /class/input/input8
[ 21.397236] dvb-usb: schedule remote query interval to 100 msecs.
[ 21.397305] dvb-usb: Hauppauge WinTV-NOVA-T usb2 successfully initialized and connected.
[ 21.397417] usbcore: registered new interface driver dvb_usb_nova_t_usb2
[ 21.928774] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 21.928888] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 22.341571] loop: module loaded
[ 22.873730] EXT4 FS on dm-0, internal journal on dm-0:8
[ 23.312403] kjournald starting. Commit interval 5 seconds
[ 23.312904] EXT3 FS on sda2, internal journal
[ 23.312912] EXT3-fs: mounted filesystem with ordered data mode.
[ 23.355648] Adding 3903236k swap on /dev/mapper/swap_crypt. Priority:-1 extents:1 across:3903236k
[ 26.375342] NET: Registered protocol family 10
[ 26.375759] lo: Disabled Privacy Extensions
[ 26.420568] JBD: barrier-based sync failed on dm-0:8 - disabling barriers
[ 26.734433] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 26.984873] input: TPPS/2 IBM TrackPoint as /class/input/input9
[ 38.871700] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
[ 40.073922] Bluetooth: L2CAP ver 2.11
[ 40.073925] Bluetooth: L2CAP socket layer initialized
[ 40.117240] Bluetooth: SCO (Voice Link) ver 0.6
[ 40.117244] Bluetooth: SCO socket layer initialized
[ 40.256249] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.256253] Bluetooth: BNEP filters: protocol multicast
[ 40.422218] Bluetooth: RFCOMM socket layer initialized
[ 40.422230] Bluetooth: RFCOMM TTY layer initialized
[ 40.422232] Bluetooth: RFCOMM ver 1.10
[ 40.595935] Bridge firewalling registered
[ 40.596187] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 42.747666] [drm] Initialized drm 1.1.0 20060810
[ 42.816917] pci 0000:00:02.0: power state changed by ACPI to D0
[ 42.816926] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 42.816930] pci 0000:00:02.0: setting latency timer to 64
[ 42.817305] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 43.449435] set status page addr 0x02ef0000
[ 44.771203] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 44.771885] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 44.772339] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[ 44.772472] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[ 47.057372] 0000:00:19.0: eth0: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
[ 47.057377] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 47.083421] Registered led device: iwl-phy0:radio
[ 47.083448] Registered led device: iwl-phy0:assoc
[ 47.083471] Registered led device: iwl-phy0:RX
[ 47.083492] Registered led device: iwl-phy0:TX
[ 47.105376] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 47.114894] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 47.227601] NET: Registered protocol family 17
[ 55.621314] tun: Universal TUN/TAP device driver, 1.6
[ 55.621319] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 55.622162] tun0: Disabled Privacy Extensions
[ 56.756742] tun1: Disabled Privacy Extensions
[ 57.200504] eth0: no IPv6 routers present
[ 72.459549] CPU0 attaching NULL sched-domain.
[ 72.459555] CPU1 attaching NULL sched-domain.
[ 72.466739] CPU0 attaching sched-domain:
[ 72.466746] domain 0: span 0-1 level MC
[ 72.466749] groups: 0 1
[ 72.466754] CPU1 attaching sched-domain:
[ 72.466756] domain 0: span 0-1 level MC
[ 72.466758] groups: 1 0
[ 80.933147] iwlagn 0000:03:00.0: PCI INT A disabled
[ 113.962191] dtv_property_cache_sync()
[ 127.149585] dtv_property_cache_sync()
[ 220.191520] dtv_property_cache_sync()
[ 455.924629] dtv_property_cache_sync()
[ 863.332424] dtv_property_cache_sync()
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-19 23:11 ` Andres Freund
@ 2008-10-19 23:25 ` Dave Airlie
2008-10-19 23:44 ` Andres Freund
0 siblings, 1 reply; 15+ messages in thread
From: Dave Airlie @ 2008-10-19 23:25 UTC (permalink / raw)
To: Andres Freund; +Cc: linux-kernel, keithp
>
> On Thursday 16 October 2008 08:59:57 Dave Airlie wrote:
> > Please pull the 'agp-next' branch from
> > ssh://master.kernel.org/pub/scm/linux/kernel/git/airlied/agp-2.6.git
> > agp-next
> >
> > This just contains some suspend/resume fixes for the SiS, Intel memory
> > sizing fix for new hw, and support for more memory types on the nvidia
> > AGP.
> One of those patches breaks X on my laptop with:
>
> (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01f7f000 (pgoffset 8063)
> (WW) intel(0): xf86BindGARTMemory: binding of gart memory with key 0
> at offset 0x1f7f000 failed (Invalid argument)
>
> Fatal server error:
> Couldn't bind memory for exa offscreen
>
> (Found via bisect with some guessing)
>
> If neccessary I can bisect further, but I guess you know what the problem is.
>
> Andres
>
>
> Xorg is: 1.5.2-2
> Xorg Intel: 2.4.1-1ubuntu9
>
What type of laptop is it and what GPU has it.
if distros are carrying GM45 supporting stuff we might be in trouble..
Dave.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-19 23:25 ` Dave Airlie
@ 2008-10-19 23:44 ` Andres Freund
2008-10-20 0:19 ` Keith Packard
0 siblings, 1 reply; 15+ messages in thread
From: Andres Freund @ 2008-10-19 23:44 UTC (permalink / raw)
To: Dave Airlie; +Cc: linux-kernel, keithp
Hi Dave,
On Monday 20 October 2008 01:25:22 Dave Airlie wrote:
> What type of laptop is it and what GPU has it.
> if distros are carrying GM45 supporting stuff we might be in trouble..
Its a Thinkpad T500 with a hybrid ATI/intel card, but the ATI card is disabled
in bios (Intel card is not recognized properly if its enabled, havent started
trying to track this down).
Vendor classifies the intel card as GMA 4500 MHD, and X says:
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45
Express
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-19 23:44 ` Andres Freund
@ 2008-10-20 0:19 ` Keith Packard
2008-10-20 0:34 ` Andres Freund
2008-10-20 1:00 ` Andres Freund
0 siblings, 2 replies; 15+ messages in thread
From: Keith Packard @ 2008-10-20 0:19 UTC (permalink / raw)
To: Andres Freund; +Cc: keithp, Dave Airlie, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1248 bytes --]
On Mon, 2008-10-20 at 01:44 +0200, Andres Freund wrote:
> Hi Dave,
>
> On Monday 20 October 2008 01:25:22 Dave Airlie wrote:
> > What type of laptop is it and what GPU has it.
> > if distros are carrying GM45 supporting stuff we might be in trouble..
The GM45/G45 support in both kernel and user space was horribly broken,
causing the kernel to either overwrite stolen entries with freshly
allocated pages, and potentially corrupt the system, or leave some GTT
entries uninitialized and cause the hardware to lock up.
You appear to have a happy situation where this bug isn't obviously
breaking things. We couldn't find any machines where even simple 2D
graphics was stable for very long.
We applied a patch to both kernel and 2D driver (as both end up
computing the size of the GTT stolen area for historical reasons) to fix
this mistake. Updating your 2D driver to 2.4.98 should get you the other
half of the fix.
> Its a Thinkpad T500 with a hybrid ATI/intel card, but the ATI card is disabled
> in bios (Intel card is not recognized properly if its enabled, havent started
> trying to track this down).
Yeah, I'm getting information about how 'hybrid' graphics hardware
works.
--
keith.packard@intel.com
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 0:19 ` Keith Packard
@ 2008-10-20 0:34 ` Andres Freund
2008-10-20 1:00 ` Andres Freund
1 sibling, 0 replies; 15+ messages in thread
From: Andres Freund @ 2008-10-20 0:34 UTC (permalink / raw)
To: Keith Packard; +Cc: Dave Airlie, linux-kernel
Hi,
On Monday 20 October 2008 02:19:37 you wrote:
> The GM45/G45 support in both kernel and user space was horribly broken,
> causing the kernel to either overwrite stolen entries with freshly
> allocated pages, and potentially corrupt the system, or leave some GTT
> entries uninitialized and cause the hardware to lock up.
I had some crashes with 3d, but none in 2d as far as I know.
> You appear to have a happy situation where this bug isn't obviously
> breaking things. We couldn't find any machines where even simple 2D
> graphics was stable for very long.
Interesting. I had the system running for some days without problems related
to graphics.
> We applied a patch to both kernel and 2D driver (as both end up
> computing the size of the GTT stolen area for historical reasons) to fix
> this mistake. Updating your 2D driver to 2.4.98 should get you the other
> half of the fix.
Ok, will try, and also report this to ubuntu and maybe other distributions...
> Yeah, I'm getting information about how 'hybrid' graphics hardware
> works.
If you need some information/testing/whatever...
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 0:19 ` Keith Packard
2008-10-20 0:34 ` Andres Freund
@ 2008-10-20 1:00 ` Andres Freund
2008-10-20 1:04 ` Dave Airlie
2008-10-20 1:35 ` Keith Packard
1 sibling, 2 replies; 15+ messages in thread
From: Andres Freund @ 2008-10-20 1:00 UTC (permalink / raw)
To: Keith Packard; +Cc: Dave Airlie, linux-kernel
On Monday 20 October 2008 02:19:37 Keith Packard wrote:
> On Mon, 2008-10-20 at 01:44 +0200, Andres Freund wrote:
> > Hi Dave,
> >
> > On Monday 20 October 2008 01:25:22 Dave Airlie wrote:
> > > What type of laptop is it and what GPU has it.
> > > if distros are carrying GM45 supporting stuff we might be in trouble..
>
> The GM45/G45 support in both kernel and user space was horribly broken,
> causing the kernel to either overwrite stolen entries with freshly
> allocated pages, and potentially corrupt the system, or leave some GTT
> entries uninitialized and cause the hardware to lock up.
>
> You appear to have a happy situation where this bug isn't obviously
> breaking things. We couldn't find any machines where even simple 2D
> graphics was stable for very long.
>
> We applied a patch to both kernel and 2D driver (as both end up
> computing the size of the GTT stolen area for historical reasons) to fix
> this mistake. Updating your 2D driver to 2.4.98 should get you the other
> half of the fix.
Hm. But still, there is at least one distribution (ubuntu intrepid) which will
propably will ship 2.4.1 in its stable version soon (it seems unlikely that
they will update to an unstable version just before an release).
Which means, that this driver will get quite some spread...
Is it accepted that the kernel abi breaks that radically/fast?
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 1:00 ` Andres Freund
@ 2008-10-20 1:04 ` Dave Airlie
2008-10-20 1:18 ` Andres Freund
2008-10-20 1:35 ` Keith Packard
1 sibling, 1 reply; 15+ messages in thread
From: Dave Airlie @ 2008-10-20 1:04 UTC (permalink / raw)
To: Andres Freund; +Cc: Keith Packard, linux-kernel
> Hm. But still, there is at least one distribution (ubuntu intrepid) which will
> propably will ship 2.4.1 in its stable version soon (it seems unlikely that
> they will update to an unstable version just before an release).
> Which means, that this driver will get quite some spread...
Intel will give the fixes to Ubuntu to roll into 2.4.x hopefully.
> Is it accepted that the kernel abi breaks that radically/fast?
>
The problem is this isn't a kernel ABI at all. This is two pieces of code
which are doing the exact same thing to a piece of hardware, one from the
kernel and one from userspace. When they disagree things break, however
sometimes when they agree things are broken. . The solution is proper
kernel graphics drivers, however that future is further away.
Dave.
> Andres
>
>
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 1:04 ` Dave Airlie
@ 2008-10-20 1:18 ` Andres Freund
0 siblings, 0 replies; 15+ messages in thread
From: Andres Freund @ 2008-10-20 1:18 UTC (permalink / raw)
To: Dave Airlie; +Cc: Keith Packard, linux-kernel
Hi,
On Monday 20 October 2008 03:04:16 Dave Airlie wrote:
> > Hm. But still, there is at least one distribution (ubuntu intrepid) which
> > will propably will ship 2.4.1 in its stable version soon (it seems
> > unlikely that they will update to an unstable version just before an
> > release). Which means, that this driver will get quite some spread...
> Intel will give the fixes to Ubuntu to roll into 2.4.x hopefully.
I opened a bugreport on their bugtracker to make them aware of the issue:
https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-intel/+bug/286182
> > Is it accepted that the kernel abi breaks that radically/fast?
> The problem is this isn't a kernel ABI at all. This is two pieces of code
> which are doing the exact same thing to a piece of hardware, one from the
> kernel and one from userspace. When they disagree things break, however
> sometimes when they agree things are broken.
Hm, I understand what you are saying, but I don't see a fundamental difference
to an ABI here. But it doesn't matter anyway...
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 1:00 ` Andres Freund
2008-10-20 1:04 ` Dave Airlie
@ 2008-10-20 1:35 ` Keith Packard
2008-10-20 1:58 ` Andres Freund
1 sibling, 1 reply; 15+ messages in thread
From: Keith Packard @ 2008-10-20 1:35 UTC (permalink / raw)
To: Andres Freund; +Cc: keithp, Dave Airlie, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1193 bytes --]
On Mon, 2008-10-20 at 03:00 +0200, Andres Freund wrote:
> Hm. But still, there is at least one distribution (ubuntu intrepid) which will
> propably will ship 2.4.1 in its stable version soon (it seems unlikely that
> they will update to an unstable version just before an release).
We can backport the fix (it's tiny) to the 2.4 2D driver.
> Which means, that this driver will get quite some spread...
> Is it accepted that the kernel abi breaks that radically/fast?
We tested a pile of hardware and didn't find any GM45s that worked, so
we assumed they were all broken and that fixing the bug wouldn't cause
any working configurations to stop working.
We can hack up the kernel so the old X server just gets a WARN_ON
instead of breaking. This is a bit worrying though; the "fix" would let
user space continue to mis-program the hardware.
My concern here is that a common failure mode with this bug was to lock
up the graphics hardware and require a reboot. Having the X server fail
to start and leave the system in text mode where new packages can be
installed seems like a better mode than making the system hang during
boot.
--
keith.packard@intel.com
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 1:35 ` Keith Packard
@ 2008-10-20 1:58 ` Andres Freund
2008-10-20 2:19 ` Keith Packard
0 siblings, 1 reply; 15+ messages in thread
From: Andres Freund @ 2008-10-20 1:58 UTC (permalink / raw)
To: Keith Packard; +Cc: Dave Airlie, linux-kernel
Hi,
On Monday 20 October 2008 03:35:21 Keith Packard wrote:
> On Mon, 2008-10-20 at 03:00 +0200, Andres Freund wrote:
> > Hm. But still, there is at least one distribution (ubuntu intrepid) which
> > will propably will ship 2.4.1 in its stable version soon (it seems
> > unlikely that they will update to an unstable version just before an
> > release).
> We can backport the fix (it's tiny) to the 2.4 2D driver.
Its basically only this, right?
diff --git a/src/i830_driver.c b/src/i830_driver.c
index c1d61f4..eaf5d27 100644
--- a/src/i830_driver.c
+++ b/src/i830_driver.c
@@ -502,8 +502,8 @@ I830DetectMemory(ScrnInfoPtr pScrn)
range = gtt_size + 4;
/* new 4 series hardware has seperate GTT stolen with GFX stolen */
- if (IS_G4X(pI830))
- range = 0;
+ if (IS_G4X(pI830) || IS_GM45(pI830))
+ range = 4;
if (IS_I85X(pI830) || IS_I865G(pI830) || IS_I9XX(pI830)) {
switch (gmch_ctrl & I855_GMCH_GMS_MASK) {
Barring that I have absolutely idea about the code and all related stuff, do I
see it correct, that this also will result in problems if the kernel doesn't
have the related fix?
> > Which means, that this driver will get quite some spread...
> > Is it accepted that the kernel abi breaks that radically/fast?
> We tested a pile of hardware and didn't find any GM45s that worked, so
> we assumed they were all broken and that fixing the bug wouldn't cause
> any working configurations to stop working.
Seems sensible from your side.
> We can hack up the kernel so the old X server just gets a WARN_ON
> instead of breaking. This is a bit worrying though; the "fix" would let
> user space continue to mis-program the hardware.
If its really only a that small portion of hardware... At least the T500/T400
series, containing the same hw as mine, from Lenovo propably is not yet really
wide spread (Laptop is 4weeks old or so and wasn't available before).
> My concern here is that a common failure mode with this bug was to lock
> up the graphics hardware and require a reboot. Having the X server fail
> to start and leave the system in text mode where new packages can be
> installed seems like a better mode than making the system hang during
> boot.
Right.
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 1:58 ` Andres Freund
@ 2008-10-20 2:19 ` Keith Packard
2008-10-20 2:27 ` Andres Freund
2008-10-20 9:50 ` Andres Freund
0 siblings, 2 replies; 15+ messages in thread
From: Keith Packard @ 2008-10-20 2:19 UTC (permalink / raw)
To: Andres Freund; +Cc: keithp, Dave Airlie, linux-kernel
[-- Attachment #1: Type: text/plain, Size: 1274 bytes --]
On Mon, 2008-10-20 at 03:58 +0200, Andres Freund wrote:
> Its basically only this, right?
Yup.
> Barring that I have absolutely idea about the code and all related stuff, do I
> see it correct, that this also will result in problems if the kernel doesn't
> have the related fix?
Yes, on this hardware, the kernel is smashing the last few stolen
entries with a bad value, so running a new driver against an old kernel
will fail as well. There's not a lot we can do about this direction
though; until we have all of this hardware management in one place,
we're stuck trying to synchronize fixes across two code bases.
> If its really only a that small portion of hardware... At least the T500/T400
> series, containing the same hw as mine, from Lenovo propably is not yet really
> wide spread (Laptop is 4weeks old or so and wasn't available before).
I haven't even received my x200s yet as they've just entered production.
The problem here was that the prototype hardware had a different
behavior than what is now shipping, so we didn't catch this mistake
until the first production machines were tested.
If you care to try the above fix against your current driver sources,
that would be helpful for us.
--
keith.packard@intel.com
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 2:19 ` Keith Packard
@ 2008-10-20 2:27 ` Andres Freund
2008-10-20 9:50 ` Andres Freund
1 sibling, 0 replies; 15+ messages in thread
From: Andres Freund @ 2008-10-20 2:27 UTC (permalink / raw)
To: Keith Packard; +Cc: Dave Airlie, linux-kernel
Hi,
On Monday 20 October 2008 04:19:07 you wrote:
> On Mon, 2008-10-20 at 03:58 +0200, Andres Freund wrote:
> > Its basically only this, right?
> > Barring that I have absolutely idea about the code and all related stuff,
> > do I see it correct, that this also will result in problems if the kernel
> > doesn't have the related fix?
> Yes, on this hardware, the kernel is smashing the last few stolen
> entries with a bad value, so running a new driver against an old kernel
> will fail as well. There's not a lot we can do about this direction
> though; until we have all of this hardware management in one place,
> we're stuck trying to synchronize fixes across two code bases.
Ugly situation. So the distribution can't really do anything, because it will
get locked either way.
> > If its really only a that small portion of hardware... At least the
> > T500/T400 series, containing the same hw as mine, from Lenovo propably is
> > not yet really wide spread (Laptop is 4weeks old or so and wasn't
> > available before).
> I haven't even received my x200s yet as they've just entered production.
> The problem here was that the prototype hardware had a different
> behavior than what is now shipping, so we didn't catch this mistake
> until the first production machines were tested.
Life is fun.
> If you care to try the above fix against your current driver sources,
> that would be helpful for us.
Will do so tomorrow morning, its 4am here ;-) and I finished the work I had to
do tonight...
Greetings,
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 2:19 ` Keith Packard
2008-10-20 2:27 ` Andres Freund
@ 2008-10-20 9:50 ` Andres Freund
2008-10-20 10:29 ` Andres Freund
1 sibling, 1 reply; 15+ messages in thread
From: Andres Freund @ 2008-10-20 9:50 UTC (permalink / raw)
To: Keith Packard; +Cc: Dave Airlie, linux-kernel
Hi Keith,
On Monday 20 October 2008 04:19:07 Keith Packard wrote:
> If you care to try the above fix against your current driver sources,
> that would be helpful for us.
Ok, tested with 2.4.1 and current linus git
(0cfd81031a26717fe14380d18275f8e217571615) and it works without problems so
far.
I have a good reason to say no to bisection requests now ;-) switching drivers
every bisection run is annoying (unfortunately I could just cherry-pick the fix
and rebase, but who knows that...)
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [git pull] agp patches for 2.6.28-rc1.
2008-10-20 9:50 ` Andres Freund
@ 2008-10-20 10:29 ` Andres Freund
0 siblings, 0 replies; 15+ messages in thread
From: Andres Freund @ 2008-10-20 10:29 UTC (permalink / raw)
To: Keith Packard; +Cc: Dave Airlie, linux-kernel
On Monday 20 October 2008 11:50:37 Andres Freund wrote:
> Ok, tested with 2.4.1 and current linus git
> (0cfd81031a26717fe14380d18275f8e217571615) and it works without problems so
> far.
Ahem, this is with the patch out of 4dd00681dd0f9fce8dfd4592b46418edbbd2eeb4
applied...
Andres
^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2008-10-20 10:29 UTC | newest]
Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-10-16 6:59 [git pull] agp patches for 2.6.28-rc1 Dave Airlie
2008-10-19 23:11 ` Andres Freund
2008-10-19 23:25 ` Dave Airlie
2008-10-19 23:44 ` Andres Freund
2008-10-20 0:19 ` Keith Packard
2008-10-20 0:34 ` Andres Freund
2008-10-20 1:00 ` Andres Freund
2008-10-20 1:04 ` Dave Airlie
2008-10-20 1:18 ` Andres Freund
2008-10-20 1:35 ` Keith Packard
2008-10-20 1:58 ` Andres Freund
2008-10-20 2:19 ` Keith Packard
2008-10-20 2:27 ` Andres Freund
2008-10-20 9:50 ` Andres Freund
2008-10-20 10:29 ` Andres Freund
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).