LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* tmpfs support of xattrs?
@ 2008-10-25  8:49 Rob MacKinnon
  2008-10-25 21:59 ` H. Peter Anvin
  2008-10-26 12:26 ` Hugh Dickins
  0 siblings, 2 replies; 15+ messages in thread
From: Rob MacKinnon @ 2008-10-25  8:49 UTC (permalink / raw)
  To: linux-kernel

The background: So during the initial configuration of a box I enabled
the xattr flags for ext3 and options of xattr in coreutils, and at the
time didn't realize that I'd hit a snag that would finally annoy me
enough after a month of getting a non-fatal error messages from cp "cp:
listing attributes of `/dev/null`: Invalid argument" to spend half a day
researching the cause and a potential solution.

Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
Problem: the resulting tmpfs has no xattr support.
Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
xattr support, cp freaks.

Is there sometime in the forseable future when the tmpfs module will
support for xattrs in the stable branch, or should I "holler at the
maintainers of coreutils to fix their broken code in cp". Even better
(and I like this option the most) a little of both?

-- Rob

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-25  8:49 tmpfs support of xattrs? Rob MacKinnon
@ 2008-10-25 21:59 ` H. Peter Anvin
  2008-10-26 12:26 ` Hugh Dickins
  1 sibling, 0 replies; 15+ messages in thread
From: H. Peter Anvin @ 2008-10-25 21:59 UTC (permalink / raw)
  To: Rob MacKinnon; +Cc: linux-kernel

Rob MacKinnon wrote:
> 
> Is there sometime in the forseable future when the tmpfs module will
> support for xattrs in the stable branch, or should I "holler at the
> maintainers of coreutils to fix their broken code in cp". Even better
> (and I like this option the most) a little of both?
> 

The right answer is definitely "both".

	-hpa


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-25  8:49 tmpfs support of xattrs? Rob MacKinnon
  2008-10-25 21:59 ` H. Peter Anvin
@ 2008-10-26 12:26 ` Hugh Dickins
  2008-10-26 13:25   ` Andreas Gruenbacher
  1 sibling, 1 reply; 15+ messages in thread
From: Hugh Dickins @ 2008-10-26 12:26 UTC (permalink / raw)
  To: Rob MacKinnon; +Cc: Stephen Smalley, Andreas Gruenbacher, linux-kernel

On Sat, 25 Oct 2008, Rob MacKinnon wrote:

> The background: So during the initial configuration of a box I enabled
> the xattr flags for ext3 and options of xattr in coreutils, and at the
> time didn't realize that I'd hit a snag that would finally annoy me
> enough after a month of getting a non-fatal error messages from cp "cp:
> listing attributes of `/dev/null`: Invalid argument" to spend half a day
> researching the cause and a potential solution.
> 
> Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
> Problem: the resulting tmpfs has no xattr support.
> Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
> xattr support, cp freaks.
> 
> Is there sometime in the forseable future when the tmpfs module will
> support for xattrs in the stable branch, or should I "holler at the
> maintainers of coreutils to fix their broken code in cp". Even better
> (and I like this option the most) a little of both?

I've not seen "cp: listing attributes of `/dev/null': Invalid argument"
messages (or.. do I have a dim recollection of them once upon a time?).
I would certainly get irritated by them if I did, and want to fix them.
I tried "cp /dev/null temp" on a few distros just now but not seen it.

I never paid much attention to xattrs myself, but my understanding was
that tmpfs has supported xattrs since 2.6.10: from 2.6.10 to 2.6.13
there was CONFIG_TMPFS_XATTR to enable it, then from 2.6.14 to 2.6.18
it was using generic security fallbacks, then from 2.6.19 onwards
using generic security fallbacks plus its own enabled by
CONFIG_TMPFS_POSIX_ACL.

There's probably various pieces of info we need from you: what distro?
what kernel? what coreutils? CONFIG_TMPFS_POSIX_ACL=y? CONFIG_SHMEM=y?
what does "attr -l /dev/null" say?

But I may well be missing the _right_ questions to ask: Cc'ed
Stephen who made the 2.6.14 changes and Andreas who made the
2.6.19 changes, they may jump to the answer immediately.

Hugh

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-26 12:26 ` Hugh Dickins
@ 2008-10-26 13:25   ` Andreas Gruenbacher
  2008-10-27 20:14     ` Rob MacKinnon
  0 siblings, 1 reply; 15+ messages in thread
From: Andreas Gruenbacher @ 2008-10-26 13:25 UTC (permalink / raw)
  To: Hugh Dickins, Rob MacKinnon; +Cc: Stephen Smalley, linux-kernel

On Sunday, 26 October 2008 13:26:35 Hugh Dickins wrote:
> On Sat, 25 Oct 2008, Rob MacKinnon wrote:
> > The background: So during the initial configuration of a box I enabled
> > the xattr flags for ext3 and options of xattr in coreutils, and at the
> > time didn't realize that I'd hit a snag that would finally annoy me
> > enough after a month of getting a non-fatal error messages from cp "cp:
> > listing attributes of `/dev/null`: Invalid argument" to spend half a day
> > researching the cause and a potential solution.
> >
> > Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
> > Problem: the resulting tmpfs has no xattr support.
> > Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
> > xattr support, cp freaks.
> >
> > Is there sometime in the forseable future when the tmpfs module will
> > support for xattrs in the stable branch, or should I "holler at the
> > maintainers of coreutils to fix their broken code in cp". Even better
> > (and I like this option the most) a little of both?
>
> I've not seen "cp: listing attributes of `/dev/null': Invalid argument"
> messages (or.. do I have a dim recollection of them once upon a time?).
> I would certainly get irritated by them if I did, and want to fix them.
> I tried "cp /dev/null temp" on a few distros just now but not seen it.

As Hugh pointed out already, tmpfs does support xattrs since quite a while, so 
enabling that should fix the symptoms. Independent of that, cp must of course 
work correctly on filesystems that don't have xattrs. Those filesystems are 
not supposed to return EINVAL, though.

Could you please run cp under strace to show us what's happening at the 
syscall level (and perhaps under ltrace in addition to see the library level 
as well)?

If the error happens at the syscall level (*listxattr), then which kernel is 
it exactly, and where can I find its sources?

Thanks,
Andreas

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-26 13:25   ` Andreas Gruenbacher
@ 2008-10-27 20:14     ` Rob MacKinnon
  2008-10-27 20:25       ` Stephen Smalley
  0 siblings, 1 reply; 15+ messages in thread
From: Rob MacKinnon @ 2008-10-27 20:14 UTC (permalink / raw)
  To: Andreas Gruenbacher, hpa, hugh, agruen; +Cc: sds, linux-kernel, rob.mackinnon

[-- Attachment #1: Type: text/plain, Size: 3652 bytes --]

Andreas Gruenbacher wrote:
> On Sunday, 26 October 2008 13:26:35 Hugh Dickins wrote:
>> On Sat, 25 Oct 2008, Rob MacKinnon wrote:
>>> The background: So during the initial configuration of a box I enabled
>>> the xattr flags for ext3 and options of xattr in coreutils, and at the
>>> time didn't realize that I'd hit a snag that would finally annoy me
>>> enough after a month of getting a non-fatal error messages from cp "cp:
>>> listing attributes of `/dev/null`: Invalid argument" to spend half a day
>>> researching the cause and a potential solution.
>>>
>>> Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
>>> Problem: the resulting tmpfs has no xattr support.
>>> Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
>>> xattr support, cp freaks.
>>>
>>> Is there sometime in the forseable future when the tmpfs module will
>>> support for xattrs in the stable branch, or should I "holler at the
>>> maintainers of coreutils to fix their broken code in cp". Even better
>>> (and I like this option the most) a little of both?
>> I've not seen "cp: listing attributes of `/dev/null': Invalid argument"
>> messages (or.. do I have a dim recollection of them once upon a time?).
>> I would certainly get irritated by them if I did, and want to fix them.
>> I tried "cp /dev/null temp" on a few distros just now but not seen it.
> 
> As Hugh pointed out already, tmpfs does support xattrs since quite a while, so 
> enabling that should fix the symptoms. Independent of that, cp must of course 
> work correctly on filesystems that don't have xattrs. Those filesystems are 
> not supposed to return EINVAL, though.
> 
> Could you please run cp under strace to show us what's happening at the 
> syscall level (and perhaps under ltrace in addition to see the library level 
> as well)?
> 
> If the error happens at the syscall level (*listxattr), then which kernel is 
> it exactly, and where can I find its sources?
> 

Thanks Andreas, Hugh & HPA

First off, thanks for looking into this.  After googling around, hitting
forums and such and not getting any answers, this list seemed the best
place to come to ask.

Now onward to business...I can say that I too was under the general
understanding that xattr for tmpfs was added at 2.6.10...and was still
currently supported.  Unfortunately I already have the config flags set
(as seen below, for a full config set attached) so there is a continued
confusion in my mind why this is still plaguing me.

I've had several friends compare what was going on, and of them they
were all running rhel and cent (most with no udev support so the
comparison didn't help at all).

I'll start out with distro info and the like...
`uname -a`="Linux shin-yuko 2.6.26-gentoo-r2 #1 SMP PREEMPT Wed Oct 22
16:31:40 PDT 2008 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel
GNU/Linux"

coreutils-version="coreutils-6.12-r2"

My current config does have the following set:
	CONFIG_TMPFS=y
	CONFIG_TMPFS_POSIX_ACL=y
	CONFIG_SHMEM=y

Output from `strace /bin/cp /dev/null /root/temp`= #see attachment
Output from `ltrace -CS /bin/cp /dev/null /root/temp`= #see attachment

Output from `attr -l /dev/null`=Segfault (hmmm...lemme look at a strace
and ltrace of that too)

`strace attr -l /dev/null`= #see attachment
`ltrace -CS /bin/attr -l /dev/null`= #see attachment

Kernel source can be attained from:
http://distfiles.gentoo.org/distfiles/linux-2.6.26.tar.bz2

Patches:
http://sources.gentoo.org/viewcvs.py/linux-patches/genpatches-2.6/trunk/2.6.26/

I know this is silly but, setfattr and getfattr obviously don't work
either...just thought it was worth mentioning.

-- Rob

[-- Attachment #2: strace attr.txt --]
[-- Type: text/plain, Size: 2230 bytes --]

execve("/bin/attr", ["attr", "-l", "/dev/null"], [/* 74 vars */]) = 0
brk(0)                                  = 0x804c000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=130887, ...}) = 0
mmap2(NULL, 130887, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f7f000
close(3)                                = 0
open("/lib/libattr.so.1", O_RDONLY)     = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\20\0\0004\0\0\0t"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=17796, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f7e000
mmap2(NULL, 20660, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f78000
mmap2(0xb7f7c000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0xb7f7c000
close(3)                                = 0
open("/lib/libc.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260g\1\0004\0\0\0\244"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1417500, ...}) = 0
mmap2(NULL, 1422928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7e1c000
mmap2(0xb7f72000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x156) = 0xb7f72000
mmap2(0xb7f75000, 9808, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f75000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7e1b000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7e1b6c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb7f72000, 8192, PROT_READ)   = 0
mprotect(0xb7f7c000, 4096, PROT_READ)   = 0
mprotect(0x804a000, 4096, PROT_READ)    = 0
mprotect(0xb7fbd000, 4096, PROT_READ)   = 0
munmap(0xb7f7f000, 130887)              = 0
brk(0)                                  = 0x804c000
brk(0x806d000)                          = 0x806d000
llistxattr("/dev/null", 0xbfdaaf74, 65536) = 16
lgetxattr("/dev/null", "security.SMACK64", 0x0, 0) = 2
--- SIGSEGV (Segmentation fault) @ 0 (0) ---
+++ killed by SIGSEGV +++

[-- Attachment #3: strace cp (with xattr support).txt --]
[-- Type: text/plain, Size: 3722 bytes --]

shin-yuko root # strace /bin/cp /dev/null temp
execve("./cp-xattr", ["/bin/cp", "/dev/null", "temp"], [/* 77 vars */]) = 0
brk(0)                                  = 0x805f000
access("/etc/ld.so.preload", R_OK)      = -1 ENOENT (No such file or directory)
open("/etc/ld.so.cache", O_RDONLY)      = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=130887, ...}) = 0
mmap2(NULL, 130887, PROT_READ, MAP_PRIVATE, 3, 0) = 0xb7f50000
close(3)                                = 0
open("/lib/libacl.so.1", O_RDONLY)      = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\31\0\0004\0\0\0\20"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=26144, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7f4f000
mmap2(NULL, 29024, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f47000
mmap2(0xb7f4d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x5) = 0xb7f4d000
close(3)                                = 0
open("/lib/libattr.so.1", O_RDONLY)     = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\300\20\0\0004\0\0\0t"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=17796, ...}) = 0
mmap2(NULL, 20660, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7f41000
mmap2(0xb7f45000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x3) = 0xb7f45000
close(3)                                = 0
open("/lib/libc.so.6", O_RDONLY)        = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260g\1\0004\0\0\0\244"..., 512) = 512
fstat64(3, {st_mode=S_IFREG|0755, st_size=1417500, ...}) = 0
mmap2(NULL, 1422928, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0xb7de5000
mmap2(0xb7f3b000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x156) = 0xb7f3b000
mmap2(0xb7f3e000, 9808, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0xb7f3e000
close(3)                                = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb7de4000
set_thread_area({entry_number:-1 -> 6, base_addr:0xb7de46c0, limit:1048575, seg_32bit:1, contents:0, read_exec_only:0, limit_in_pages:1, seg_not_present:0, useable:1}) = 0
mprotect(0xb7f3b000, 8192, PROT_READ)   = 0
mprotect(0xb7f45000, 4096, PROT_READ)   = 0
mprotect(0xb7f4d000, 4096, PROT_READ)   = 0
mprotect(0x805d000, 4096, PROT_READ)    = 0
mprotect(0xb7f8e000, 4096, PROT_READ)   = 0
munmap(0xb7f50000, 130887)              = 0
brk(0)                                  = 0x805f000
brk(0x8080000)                          = 0x8080000
geteuid32()                             = 0
stat64("temp", 0xbfd8c7a4)              = -1 ENOENT (No such file or directory)
stat64("/dev/null", {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0
stat64("temp", 0xbfd8c5f0)              = -1 ENOENT (No such file or directory)
open("/dev/null", O_RDONLY|O_LARGEFILE) = 3
fstat64(3, {st_mode=S_IFCHR|0666, st_rdev=makedev(1, 3), ...}) = 0
open("temp", O_WRONLY|O_CREAT|O_EXCL|O_LARGEFILE, 0666) = 4
fstat64(4, {st_mode=S_IFREG|0644, st_size=0, ...}) = 0
read(3, ""..., 8192)                    = 0
llistxattr("/dev/null", (nil), 0)       = -1 EINVAL (Invalid argument)
write(2, "/bin/cp: "..., 12/bin/cp: )         = 12
write(2, "listing attributes of `/dev/null'"..., 33listing attributes of `/dev/null') = 33
write(2, ": Invalid argument"..., 18: Invalid argument)   = 18
write(2, "\n"..., 1
)                    = 1
close(4)                                = 0
close(3)                                = 0
close(0)                                = 0
close(1)                                = 0
close(2)                                = 0
exit_group(1)                           = ?


[-- Attachment #4: ltrace cp (with xattr support).txt --]
[-- Type: text/plain, Size: 11075 bytes --]

SYS_brk(NULL)                                                                           = 0x805f000
SYS_access("/etc/ld.so.preload", 04)                                                    = -2
SYS_open("/etc/ld.so.cache", 0, 00)                                                     = 3
SYS_fstat64(3, 0xbfbfcfcc, 0xb7efffc4, -1, 3)                                           = 0
SYS_mmap2(0, 130887, 1, 2, 3)                                                           = 0xb7ec1000
SYS_close(3)                                                                            = 0
SYS_open("/lib/libacl.so.1", 0, 00)                                                     = 3
SYS_read(3, "\177ELF\001\001\001", 512)                                                 = 512
SYS_fstat64(3, 0xbfbfd03c, 0xb7efffc4, 0, 0)                                            = 0
SYS_mmap2(0, 4096, 3, 34, -1)                                                           = 0xb7ec0000
SYS_mmap2(0, 29024, 5, 2050, 3)                                                         = 0xb7eb8000
SYS_mmap2(0xb7ebe000, 8192, 3, 2066, 3)                                                 = 0xb7ebe000
SYS_close(3)                                                                            = 0
SYS_open("/lib/libattr.so.1", 0, 00)                                                    = 3
SYS_read(3, "\177ELF\001\001\001", 512)                                                 = 512
SYS_fstat64(3, 0xbfbfd020, 0xb7efffc4, 0, 0)                                            = 0
SYS_mmap2(0, 20660, 5, 2050, 3)                                                         = 0xb7eb2000
SYS_mmap2(0xb7eb6000, 8192, 3, 2066, 3)                                                 = 0xb7eb6000
SYS_close(3)                                                                            = 0
SYS_open("/lib/libc.so.6", 0, 00)                                                       = 3
SYS_read(3, "\177ELF\001\001\001", 512)                                                 = 512
SYS_fstat64(3, 0xbfbfd004, 0xb7efffc4, 0, 0)                                            = 0
SYS_mmap2(0, 0x15b650, 5, 2050, 3)                                                      = 0xb7d56000
SYS_mmap2(0xb7eac000, 12288, 3, 2066, 3)                                                = 0xb7eac000
SYS_mmap2(0xb7eaf000, 9808, 3, 50, -1)                                                  = 0xb7eaf000
SYS_close(3)                                                                            = 0
SYS_mmap2(0, 4096, 3, 34, -1)                                                           = 0xb7d55000
SYS_set_thread_area(0xbfbfd58c, 0xb7d556c0, 243, 0xb7efffc4, 0xfffff)                   = 0
SYS_mprotect(0xb7eac000, 8192, 1)                                                       = 0
SYS_mprotect(0xb7eb6000, 4096, 1)                                                       = 0
SYS_mprotect(0xb7ebe000, 4096, 1)                                                       = 0
SYS_mprotect(0x805d000, 4096, 1)                                                        = 0
SYS_mprotect(0xb7eff000, 4096, 1)                                                       = 0
SYS_munmap(0xb7ec1000, 130887)                                                          = 0
__libc_start_main(0x804b35c, 3, 0xbfbfd834, 0x8059a40, 0x8059a30 <unfinished ...>
setlocale(6, "")                                                                        = "C"
bindtextdomain("coreutils", "/usr/share/locale" <unfinished ...>
SYS_brk(NULL)                                                                           = 0x805f000
SYS_brk(0x8080000)                                                                      = 0x8080000
<... bindtextdomain resumed> )                                                          = "/usr/share/locale"
textdomain("coreutils")                                                                 = "coreutils"
__cxa_atexit(0x80520de, 0, 0, 0xb7eadff4, 0x804b3bd)                                    = 0
geteuid( <unfinished ...>
SYS_geteuid32(0xbfbfd750, 0, 0xb7eaecb8, 0xb7effc80, 0xbfbfd788)                        = 0
<... geteuid resumed> )                                                                 = 0
getenv("POSIXLY_CORRECT")                                                               = NULL
getenv("SIMPLE_BACKUP_SUFFIX")                                                          = NULL
getopt_long(3, 0xbfbfd834, "abdfHilLprst:uvxPRS:T", 0x805a2a0, NULL)                    = -1
malloc(40)                                                                              = 0x805f038
calloc(131, 8)                                                                          = 0x805f068
__xstat64(3, "temp", 0xbfbfd624 <unfinished ...>
SYS_stat64(0xbfbfee39, 0xbfbfd624, 0xb7eadff4, 0, 0xbfbfd834)                           = 0
<... __xstat64 resumed> )                                                               = 0
__xstat64(3, "/dev/null", 0xbfbfd4d0 <unfinished ...>
SYS_stat64(0xbfbfee2f, 0xbfbfd4d0, 0xb7eadff4, 0xbfbfee2f, 0xbfbfee2f)                  = 0
<... __xstat64 resumed> )                                                               = 0
__xstat64(3, "temp", 0xbfbfd470 <unfinished ...>
SYS_stat64(0xbfbfee39, 0xbfbfd470, 0xb7eadff4, 0, 0xbfbfd470)                           = 0
<... __xstat64 resumed> )                                                               = 0
open64("/dev/null", 0, 00 <unfinished ...>
SYS_open("/dev/null", 32768, 00)                                                        = 3
<... open64 resumed> )                                                                  = 3
__fxstat64(3, 3, 0xbfbfd3b0 <unfinished ...>
SYS_fstat64(3, 0xbfbfd3b0, 0xb7eadff4, 0, 0xbfbfd750)                                   = 0
<... __fxstat64 resumed> )                                                              = 0
open64("temp", 513, 00 <unfinished ...>
SYS_open("temp", 33281, 00)                                                             = 4
<... open64 resumed> )                                                                  = 4
__errno_location()                                                                      = 0xb7d55688
__fxstat64(3, 4, 0xbfbfd410 <unfinished ...>
SYS_fstat64(4, 0xbfbfd410, 0xb7eadff4, 0xb7d55688, 0)                                   = 0
<... __fxstat64 resumed> )                                                              = 0
getpagesize()                                                                           = 4096
malloc(12291)                                                                           = 0x805f488
read(3,  <unfinished ...>
SYS_read(3, "", 8192)                                                                   = 0
<... read resumed> "", 8192)                                                            = 0
free(NULL)                                                                              = <void>
free(NULL)                                                                              = <void>
malloc(0)                                                                               = 0x8062490
malloc(256)                                                                             = 0x80624a0
re_compile_pattern(0x805b8ad, 0, 0x805e1f0, 0x8060000, 0xbfbfd598)                      = 0
attr_copy_file(0xbfbfee2f, 0xbfbfee39, 0x804c220, 0x805e1e0, 0xbfbfd598 <unfinished ...>
SYS_llistxattr("/dev/null", NULL, 0)                                                    = -22
__errno_location()                                                                      = 0xb7d55688
__ctype_get_mb_cur_max(0xb7ec0298, 0x804900c, 0xbfbfd1a0, 0xbfbfd188, 0xb7eb2a8e)       = 1
dcgettext(0, 0x805c2e2, 5, 0xb7d7a390, 0x805e340)                                       = 0x805c2e2
dcgettext(0, 0x805be2a, 5, 0xb7d7a390, 0x805e340)                                       = 0x805be2a
malloc(12)                                                                              = 0x8062a40
memcpy(0x8062a40, "`/dev/null'", 12)                                                    = 0x8062a40
__errno_location()                                                                      = 0xb7d55688
vsnprintf(NULL, 0, "listing attributes of %s", 0xbfbfd1f8)                              = 33
malloc(34)                                                                              = 0x8062648
vsnprintf("listing attributes of `/dev/null"..., 34, "listing attributes of %s", 0xbfbfd1f8) = 33
error(0, 22, 0x805c23b, 0x8062648, 0x804bbb5 <unfinished ...>
SYS_write(2, "/bin/cp: ", 12)                                                        = 12
SYS_write(2, "listing attributes of `/dev/null"..., 33)                                 = 33
SYS_write(2, ": Invalid argument", 18)                                                  = 18
SYS_write(2, "\n", 1)                                                                   = 1
<... error resumed> )                                                                   = 0
free(0x8062648)                                                                         = <void>
free(0x8062a40)                                                                         = <void>
<... attr_copy_file resumed> )                                                          = -1
close(4 <unfinished ...>
SYS_close(4)                                                                            = 0
<... close resumed> )                                                                   = 0
close(3 <unfinished ...>
SYS_close(3)                                                                            = 0
<... close resumed> )                                                                   = 0
free(0x805f488)                                                                         = <void>
free(NULL)                                                                              = <void>
free(0x805f068)                                                                         = <void>
free(0x805f038)                                                                         = <void>
exit(1 <unfinished ...>
__fpending(0xb7eae420, 1, 0x8049101, 0xb7ef08be, 0)                                     = 0
fclose(0xb7eae420 <unfinished ...>
SYS_close(0)                                                                            = 0
<... fclose resumed> )                                                                  = 0
__fpending(0xb7eae4c0, 1, 0x8049101, 0xb7ef08be, 0xb7eadff4)                            = 0
fclose(0xb7eae4c0 <unfinished ...>
SYS_close(1)                                                                            = 0
<... fclose resumed> )                                                                  = 0
__fpending(0xb7eae560, 1, 0x8049101, 0xb7ef08be, 0xb7eadff4)                            = 0
fclose(0xb7eae560 <unfinished ...>
SYS_close(2)                                                                            = 0
<... fclose resumed> )                                                                  = 0
SYS_exit_group(1 <no return ...>
+++ exited (status 1) +++

[-- Attachment #5: ltrace attr.txt --]
[-- Type: text/plain, Size: 4009 bytes --]

SYS_brk(NULL)                                                                           = 0x804c000
SYS_access("/etc/ld.so.preload", 04)                                                    = -2
SYS_open("/etc/ld.so.cache", 0, 00)                                                     = 3
SYS_fstat64(3, 0xbf8a4c2c, 0xb7fa7fc4, -1, 3)                                           = 0
SYS_mmap2(0, 130887, 1, 2, 3)                                                           = 0xb7f69000
SYS_close(3)                                                                            = 0
SYS_open("/lib/libattr.so.1", 0, 00)                                                    = 3
SYS_read(3, "\177ELF\001\001\001", 512)                                                 = 512
SYS_fstat64(3, 0xbf8a4c9c, 0xb7fa7fc4, 0, 0)                                            = 0
SYS_mmap2(0, 4096, 3, 34, -1)                                                           = 0xb7f68000
SYS_mmap2(0, 20660, 5, 2050, 3)                                                         = 0xb7f62000
SYS_mmap2(0xb7f66000, 8192, 3, 2066, 3)                                                 = 0xb7f66000
SYS_close(3)                                                                            = 0
SYS_open("/lib/libc.so.6", 0, 00)                                                       = 3
SYS_read(3, "\177ELF\001\001\001", 512)                                                 = 512
SYS_fstat64(3, 0xbf8a4c80, 0xb7fa7fc4, 0, 0)                                            = 0
SYS_mmap2(0, 0x15b650, 5, 2050, 3)                                                      = 0xb7e06000
SYS_mmap2(0xb7f5c000, 12288, 3, 2066, 3)                                                = 0xb7f5c000
SYS_mmap2(0xb7f5f000, 9808, 3, 50, -1)                                                  = 0xb7f5f000
SYS_close(3)                                                                            = 0
SYS_mmap2(0, 4096, 3, 34, -1)                                                           = 0xb7e05000
SYS_set_thread_area(0xbf8a51ec, 0xb7e056c0, 243, 0xb7fa7fc4, 0xfffff)                   = 0
SYS_mprotect(0xb7f5c000, 8192, 1)                                                       = 0
SYS_mprotect(0xb7f66000, 4096, 1)                                                       = 0
SYS_mprotect(0x804a000, 4096, 1)                                                        = 0
SYS_mprotect(0xb7fa7000, 4096, 1)                                                       = 0
SYS_munmap(0xb7f69000, 130887)                                                          = 0
__libc_start_main(0x8048af3, 3, 0xbf8a5494, 0x8049290, 0x8049280 <unfinished ...>
basename("attr")                                                                        = "attr"
setlocale(0, "")                                                                        = "C"
setlocale(5, "")                                                                        = "C"
bindtextdomain("attr", "/usr/share/locale" <unfinished ...>
SYS_brk(NULL)                                                                           = 0x804c000
SYS_brk(0x806d000)                                                                      = 0x806d000
<... bindtextdomain resumed> )                                                          = "/usr/share/locale"
textdomain("attr")                                                                      = "attr"
getopt(3, 0xbf8a5494, "s:V:g:r:lqLRS")                                                  = 108
getopt(3, 0xbf8a5494, "s:V:g:r:lqLRS")                                                  = -1
malloc(61440)                                                                           = 0x804c030
attr_list(0xbf8a6dd2, 0x804c030, 61440, 1, 0xbf8a53d4 <unfinished ...>
SYS_llistxattr("/dev/null", 0xbf895264, 65536)                                          = 16
SYS_lgetxattr("/dev/null", "security.SMACK64", NULL, 0)                                 = 2
--- SIGSEGV (Segmentation fault) ---
+++ killed by SIGSEGV +++

[-- Attachment #6: kernel-config-x86-2.6.26-gentoo-r2 --]
[-- Type: text/plain, Size: 66696 bytes --]

#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.26-gentoo-r1
# Fri Oct  3 19:33:30 2008
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_FAST_CMPXCHG_LOCAL=y
CONFIG_MMU=y
CONFIG_ZONE_DMA=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_HWEIGHT=y
# CONFIG_GENERIC_GPIO is not set
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
# CONFIG_RWSEM_GENERIC_SPINLOCK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_ARCH_HAS_CPU_IDLE_WAIT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_ZONE_DMA32 is not set
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_AOUT=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_X86_SMP=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"

#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
CONFIG_TASKSTATS=y
# CONFIG_TASK_DELAY_ACCT is not set
# CONFIG_TASK_XACCT is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=15
# CONFIG_CGROUPS is not set
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
# CONFIG_GROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
# CONFIG_HAVE_DMA_ATTRS is not set
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_KMOD is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_LSF=y
# CONFIG_BLK_DEV_BSG is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
CONFIG_CLASSIC_RCU=y

#
# Processor type and features
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_X86_PC=y
# CONFIG_X86_ELAN is not set
# CONFIG_X86_VOYAGER is not set
# CONFIG_X86_NUMAQ is not set
# CONFIG_X86_SUMMIT is not set
# CONFIG_X86_BIGSMP is not set
# CONFIG_X86_VISWS is not set
# CONFIG_X86_GENERICARCH is not set
# CONFIG_X86_ES7000 is not set
# CONFIG_X86_RDC321X is not set
# CONFIG_X86_VSMP is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_M386 is not set
# CONFIG_M486 is not set
# CONFIG_M586 is not set
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMII is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUMM is not set
CONFIG_MPENTIUM4=y
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MK8 is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MEFFICEON is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MGEODEGX1 is not set
# CONFIG_MGEODE_LX is not set
# CONFIG_MCYRIXIII is not set
# CONFIG_MVIAC3_2 is not set
# CONFIG_MVIAC7 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=7
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_INTEL_USERCOPY=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_X86_TSC=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=4
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_HPET_TIMER=y
CONFIG_HPET_EMULATE_RTC=y
CONFIG_DMI=y
# CONFIG_IOMMU_HELPER is not set
CONFIG_NR_CPUS=4
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
# CONFIG_PREEMPT_RCU is not set
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_VM86=y
# CONFIG_TOSHIBA is not set
# CONFIG_I8K is not set
CONFIG_X86_REBOOTFIXUPS=y
CONFIG_MICROCODE=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_VMSPLIT_3G=y
# CONFIG_VMSPLIT_3G_OPT is not set
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_2G_OPT is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_HIGHMEM=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_SPARSEMEM_STATIC=y
# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_RESOURCES_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_IRQBALANCE=y
CONFIG_SECCOMP=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
CONFIG_PHYSICAL_START=0x200000
# CONFIG_RELOCATABLE is not set
CONFIG_PHYSICAL_ALIGN=0x100000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y

#
# Power management options
#
CONFIG_PM=y
# CONFIG_PM_DEBUG is not set
CONFIG_PM_SLEEP_SMP=y
CONFIG_PM_SLEEP=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
# CONFIG_HIBERNATION is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_PROCFS=y
CONFIG_ACPI_PROCFS_POWER=y
CONFIG_ACPI_SYSFS_POWER=y
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
# CONFIG_ACPI_BATTERY is not set
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=m
# CONFIG_ACPI_BAY is not set
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_WMI=y
# CONFIG_ACPI_ASUS is not set
# CONFIG_ACPI_TOSHIBA is not set
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
CONFIG_ACPI_SBS=y
CONFIG_X86_APM_BOOT=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
CONFIG_APM_CPU_IDLE=y
# CONFIG_APM_DISPLAY_BLANK is not set
# CONFIG_APM_ALLOW_INTS is not set
CONFIG_APM_REAL_MODE_POWER_OFF=y

#
# CPU Frequency scaling
#
# CONFIG_CPU_FREQ is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y

#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GOMMCONFIG is not set
# CONFIG_PCI_GODIRECT is not set
# CONFIG_PCI_GOOLPC is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
CONFIG_HT_IRQ=y
CONFIG_ISA_DMA_API=y
CONFIG_ISA=y
# CONFIG_EISA is not set
# CONFIG_MCA is not set
# CONFIG_SCx200 is not set
# CONFIG_OLPC is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
# CONFIG_HOTPLUG_PCI_COMPAQ is not set
# CONFIG_HOTPLUG_PCI_IBM is not set
CONFIG_HOTPLUG_PCI_ACPI=m
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set

#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set

#
# Networking
#
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=y
CONFIG_XFRM_SUB_POLICY=y
CONFIG_XFRM_MIGRATE=y
# CONFIG_XFRM_STATISTICS is not set
CONFIG_NET_KEY=m
# CONFIG_NET_KEY_MIGRATE is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_ASK_IP_FIB_HASH=y
# CONFIG_IP_FIB_TRIE is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
# CONFIG_IP_ROUTE_VERBOSE is not set
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_BOOTP is not set
# CONFIG_IP_PNP_RARP is not set
CONFIG_NET_IPIP=y
CONFIG_NET_IPGRE=y
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
CONFIG_ARPD=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_INET_IPCOMP=m
CONFIG_INET_XFRM_TUNNEL=m
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=m
CONFIG_INET_XFRM_MODE_TUNNEL=m
CONFIG_INET_XFRM_MODE_BEET=m
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
CONFIG_TCP_CONG_ADVANCED=y
# CONFIG_TCP_CONG_BIC is not set
# CONFIG_TCP_CONG_CUBIC is not set
# CONFIG_TCP_CONG_WESTWOOD is not set
# CONFIG_TCP_CONG_HTCP is not set
# CONFIG_TCP_CONG_HSTCP is not set
# CONFIG_TCP_CONG_HYBLA is not set
CONFIG_TCP_CONG_VEGAS=y
# CONFIG_TCP_CONG_SCALABLE is not set
# CONFIG_TCP_CONG_LP is not set
# CONFIG_TCP_CONG_VENO is not set
# CONFIG_TCP_CONG_YEAH is not set
# CONFIG_TCP_CONG_ILLINOIS is not set
# CONFIG_DEFAULT_BIC is not set
# CONFIG_DEFAULT_CUBIC is not set
# CONFIG_DEFAULT_HTCP is not set
CONFIG_DEFAULT_VEGAS=y
# CONFIG_DEFAULT_WESTWOOD is not set
# CONFIG_DEFAULT_RENO is not set
CONFIG_DEFAULT_TCP_CONG="vegas"
CONFIG_TCP_MD5SIG=y
# CONFIG_IP_VS is not set
CONFIG_IPV6=m
CONFIG_IPV6_PRIVACY=y
CONFIG_IPV6_ROUTER_PREF=y
# CONFIG_IPV6_ROUTE_INFO is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
CONFIG_INET6_AH=m
CONFIG_INET6_ESP=m
CONFIG_INET6_IPCOMP=m
# CONFIG_IPV6_MIP6 is not set
CONFIG_INET6_XFRM_TUNNEL=m
CONFIG_INET6_TUNNEL=m
CONFIG_INET6_XFRM_MODE_TRANSPORT=m
CONFIG_INET6_XFRM_MODE_TUNNEL=m
CONFIG_INET6_XFRM_MODE_BEET=m
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=m
CONFIG_IPV6_NDISC_NODETYPE=y
CONFIG_IPV6_TUNNEL=m
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
CONFIG_NETLABEL=y
CONFIG_NETWORK_SECMARK=y
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
CONFIG_BRIDGE_NETFILTER=y

#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CT_ACCT=y
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_SECMARK=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_GRE=m
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
# CONFIG_NF_CONNTRACK_FTP is not set
# CONFIG_NF_CONNTRACK_H323 is not set
# CONFIG_NF_CONNTRACK_IRC is not set
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
CONFIG_NF_CONNTRACK_PPTP=m
# CONFIG_NF_CONNTRACK_SANE is not set
CONFIG_NF_CONNTRACK_SIP=m
# CONFIG_NF_CONNTRACK_TFTP is not set
CONFIG_NF_CT_NETLINK=m
CONFIG_NETFILTER_XTABLES=y
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
CONFIG_NETFILTER_XT_TARGET_DSCP=m
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_SECMARK=m
CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
CONFIG_NETFILTER_XT_MATCH_DCCP=m
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
CONFIG_NETFILTER_XT_MATCH_REALM=m
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m

#
# IP: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
# CONFIG_IP_NF_QUEUE is not set
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_RECENT=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_ADDRTYPE=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_NF_NAT=m
CONFIG_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_TARGET_NETMAP=m
CONFIG_NF_NAT_SNMP_BASIC=m
CONFIG_NF_NAT_PROTO_GRE=m
CONFIG_NF_NAT_PROTO_UDPLITE=m
CONFIG_NF_NAT_PROTO_SCTP=m
# CONFIG_NF_NAT_FTP is not set
# CONFIG_NF_NAT_IRC is not set
# CONFIG_NF_NAT_TFTP is not set
# CONFIG_NF_NAT_AMANDA is not set
CONFIG_NF_NAT_PPTP=m
# CONFIG_NF_NAT_H323 is not set
CONFIG_NF_NAT_SIP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m

#
# IPv6: Netfilter Configuration
#
CONFIG_NF_CONNTRACK_IPV6=m
# CONFIG_IP6_NF_QUEUE is not set
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_RT=m
CONFIG_IP6_NF_MATCH_OPTS=m
CONFIG_IP6_NF_MATCH_FRAG=m
CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_MH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_TARGET_REJECT=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_HL=m
CONFIG_IP6_NF_RAW=m

#
# Bridge: Netfilter Configuration
#
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_802_3=m
CONFIG_BRIDGE_EBT_AMONG=m
CONFIG_BRIDGE_EBT_ARP=m
CONFIG_BRIDGE_EBT_IP=m
CONFIG_BRIDGE_EBT_LIMIT=m
CONFIG_BRIDGE_EBT_MARK=m
CONFIG_BRIDGE_EBT_PKTTYPE=m
CONFIG_BRIDGE_EBT_STP=m
CONFIG_BRIDGE_EBT_VLAN=m
CONFIG_BRIDGE_EBT_ARPREPLY=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_LOG=m
# CONFIG_BRIDGE_EBT_ULOG is not set
CONFIG_BRIDGE_EBT_NFLOG=m
# CONFIG_IP_DCCP is not set
CONFIG_IP_SCTP=m
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
CONFIG_BRIDGE=m
CONFIG_VLAN_8021Q=m
# CONFIG_DECNET is not set
CONFIG_LLC=m
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
CONFIG_NET_SCHED=y

#
# Queueing/Scheduling
#
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_HFSC=m
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_NETEM=m
CONFIG_NET_SCH_INGRESS=m

#
# Classification
#
CONFIG_NET_CLS=y
CONFIG_NET_CLS_BASIC=m
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_CLS_U32_PERF=y
CONFIG_CLS_U32_MARK=y
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
# CONFIG_NET_CLS_FLOW is not set
CONFIG_NET_EMATCH=y
CONFIG_NET_EMATCH_STACK=32
CONFIG_NET_EMATCH_CMP=m
CONFIG_NET_EMATCH_NBYTE=m
CONFIG_NET_EMATCH_U32=m
CONFIG_NET_EMATCH_META=m
CONFIG_NET_EMATCH_TEXT=m
CONFIG_NET_CLS_ACT=y
CONFIG_NET_ACT_POLICE=m
CONFIG_NET_ACT_GACT=m
CONFIG_GACT_PROB=y
CONFIG_NET_ACT_MIRRED=m
CONFIG_NET_ACT_IPT=m
# CONFIG_NET_ACT_NAT is not set
CONFIG_NET_ACT_PEDIT=m
# CONFIG_NET_ACT_SIMP is not set
CONFIG_NET_CLS_IND=y
CONFIG_NET_SCH_FIFO=y

#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m

#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y

#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
CONFIG_IRDA_FAST_RR=y
# CONFIG_IRDA_DEBUG is not set

#
# Infrared-port device drivers
#

#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m

#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
CONFIG_TOIM3232_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MA600_DONGLE=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_KINGSUN_DONGLE=m
# CONFIG_KSDAZZLE_DONGLE is not set
# CONFIG_KS959_DONGLE is not set

#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_SIGMATEL_FIR=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
CONFIG_VIA_FIR=m
CONFIG_MCS_FIR=m
CONFIG_BT=y
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
CONFIG_BT_HIDP=m

#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
CONFIG_BT_HCIUSB_SCO=y
# CONFIG_BT_HCIBTSDIO is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
# CONFIG_BT_HCIUART_LL is not set
CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBPA10X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y

#
# Wireless
#
CONFIG_CFG80211=y
# CONFIG_NL80211 is not set
CONFIG_WIRELESS_EXT=y
CONFIG_MAC80211=m

#
# Rate control algorithm selection
#
CONFIG_MAC80211_RC_DEFAULT_PID=y
# CONFIG_MAC80211_RC_DEFAULT_NONE is not set

#
# Selecting 'y' for an algorithm will
#

#
# build the algorithm into mac80211.
#
CONFIG_MAC80211_RC_DEFAULT="pid"
CONFIG_MAC80211_RC_PID=y
CONFIG_MAC80211_MESH=y
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set
# CONFIG_MAC80211_DEBUG is not set
CONFIG_IEEE80211=m
# CONFIG_IEEE80211_DEBUG is not set
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
# CONFIG_PARPORT_GSC is not set
# CONFIG_PARPORT_AX88796 is not set
CONFIG_PARPORT_1284=y
CONFIG_PNP=y
# CONFIG_PNP_DEBUG is not set

#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
CONFIG_PNPBIOS_PROC_FS=y
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_UB=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
CONFIG_CDROM_PKTCDVD=y
CONFIG_CDROM_PKTCDVD_BUFFERS=8
CONFIG_CDROM_PKTCDVD_WCACHE=y
CONFIG_ATA_OVER_ETH=m
CONFIG_MISC_DEVICES=y
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_TC1100_WMI is not set
# CONFIG_MSI_LAPTOP is not set
# CONFIG_SONY_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_EEEPC_LAPTOP is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
CONFIG_IDE_MAX_HWIFS=8
CONFIG_BLK_DEV_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
CONFIG_BLK_DEV_IDETAPE=m
CONFIG_BLK_DEV_IDEFLOPPY=m
# CONFIG_BLK_DEV_IDESCSI is not set
CONFIG_BLK_DEV_IDEACPI=y
CONFIG_IDE_TASK_IOCTL=y
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
CONFIG_BLK_DEV_IDEPNP=y
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CY82C693 is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_CS5535 is not set
# CONFIG_BLK_DEV_HPT34X is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
# CONFIG_BLK_DEV_TC86C001 is not set

#
# Other IDE chipsets support
#

#
# Note: most of these also require special kernel boot parameters
#
# CONFIG_BLK_DEV_4DRIVES is not set
# CONFIG_BLK_DEV_ALI14XX is not set
# CONFIG_BLK_DEV_DTC2278 is not set
# CONFIG_BLK_DEV_HT6560B is not set
# CONFIG_BLK_DEV_QD65XX is not set
# CONFIG_BLK_DEV_UMC8672 is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_BLK_DEV_HD_ONLY is not set
# CONFIG_BLK_DEV_HD is not set

#
# SCSI device support
#
CONFIG_RAID_ATTRS=y
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_TGT=y
CONFIG_SCSI_NETLINK=y
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=m
CONFIG_CHR_DEV_SCH=m

#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_CONSTANTS is not set
CONFIG_SCSI_LOGGING=y
# CONFIG_SCSI_SCAN_ASYNC is not set
CONFIG_SCSI_WAIT_SCAN=m

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=m
CONFIG_SCSI_FC_ATTRS=m
# CONFIG_SCSI_FC_TGT_ATTRS is not set
CONFIG_SCSI_ISCSI_ATTRS=m
CONFIG_SCSI_SAS_ATTRS=m
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SAS_ATA=y
CONFIG_SCSI_SAS_HOST_SMP=y
# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
CONFIG_ISCSI_TCP=m
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_7000FASST is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AHA152X is not set
# CONFIG_SCSI_AHA1542 is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC7XXX_OLD is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_IN2000 is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_DTC3280 is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_GDTH is not set
# CONFIG_SCSI_GENERIC_NCR5380 is not set
# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_PPA is not set
# CONFIG_SCSI_IMM is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_NCR53C406A is not set
# CONFIG_SCSI_STEX is not set
# CONFIG_SCSI_SYM53C8XX_2 is not set
# CONFIG_SCSI_IPR is not set
# CONFIG_SCSI_PAS16 is not set
# CONFIG_SCSI_QLOGIC_FAS is not set
# CONFIG_SCSI_QLOGIC_1280 is not set
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_SYM53C416 is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_DC390T is not set
# CONFIG_SCSI_T128 is not set
# CONFIG_SCSI_U14_34F is not set
# CONFIG_SCSI_ULTRASTOR is not set
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
CONFIG_SCSI_SRP=y
CONFIG_ATA=m
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y
CONFIG_SATA_AHCI=m
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
# CONFIG_SATA_SVW is not set
# CONFIG_ATA_PIIX is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SX4 is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
CONFIG_SATA_VIA=m
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ACPI is not set
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5535 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_ISAPNP is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_QDI is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RZ1000 is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
CONFIG_PATA_VIA=m
# CONFIG_PATA_WINBOND is not set
# CONFIG_PATA_WINBOND_VLB is not set
# CONFIG_PATA_PLATFORM is not set
# CONFIG_PATA_SCH is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=y
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=y
CONFIG_MD_RAID10=m
CONFIG_MD_RAID456=m
CONFIG_MD_RAID5_RESHAPE=y
CONFIG_MD_MULTIPATH=m
CONFIG_MD_FAULTY=m
CONFIG_BLK_DEV_DM=y
CONFIG_DM_DEBUG=y
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
CONFIG_DM_MIRROR=y
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_EMC is not set
# CONFIG_DM_MULTIPATH_RDAC is not set
# CONFIG_DM_MULTIPATH_HP is not set
# CONFIG_DM_DELAY is not set
CONFIG_DM_UEVENT=y
CONFIG_BLK_DEV_DM_BBR=m
# CONFIG_FUSION is not set

#
# IEEE 1394 (FireWire) support
#

#
# Enable only one of the two stacks, unless you know what you are doing
#
# CONFIG_FIREWIRE is not set
CONFIG_IEEE1394=y
CONFIG_IEEE1394_OHCI1394=y
# CONFIG_IEEE1394_PCILYNX is not set
CONFIG_IEEE1394_SBP2=y
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394_ROM_ENTRY=y
CONFIG_IEEE1394_ETH1394=y
CONFIG_IEEE1394_RAWIO=y
CONFIG_IEEE1394_VIDEO1394=y
# CONFIG_IEEE1394_DV1394 is not set
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_I2O=m
# CONFIG_I2O_LCT_NOTIFY_ON_CHANGES is not set
# CONFIG_I2O_EXT_ADAPTEC is not set
CONFIG_I2O_CONFIG=m
# CONFIG_I2O_CONFIG_OLD_IOCTL is not set
CONFIG_I2O_BUS=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NETDEVICES_MULTIQUEUE=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_MACVLAN=m
# CONFIG_EQUALIZER is not set
CONFIG_TUN=m
# CONFIG_VETH is not set
CONFIG_NET_SB1000=m
# CONFIG_ARCNET is not set
CONFIG_PHYLIB=m

#
# MII PHY device drivers
#
CONFIG_MARVELL_PHY=m
CONFIG_DAVICOM_PHY=m
CONFIG_QSEMI_PHY=m
CONFIG_LXT_PHY=m
CONFIG_CICADA_PHY=m
CONFIG_VITESSE_PHY=m
CONFIG_SMSC_PHY=m
CONFIG_BROADCOM_PHY=m
CONFIG_ICPLUS_PHY=m
# CONFIG_REALTEK_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_EL1 is not set
# CONFIG_EL2 is not set
# CONFIG_ELPLUS is not set
# CONFIG_EL16 is not set
# CONFIG_EL3 is not set
# CONFIG_3C515 is not set
CONFIG_VORTEX=m
CONFIG_TYPHOON=m
# CONFIG_LANCE is not set
# CONFIG_NET_VENDOR_SMC is not set
# CONFIG_ENC28J60 is not set
# CONFIG_NET_VENDOR_RACAL is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
CONFIG_TULIP_MWI=y
CONFIG_TULIP_MMIO=y
CONFIG_TULIP_NAPI=y
CONFIG_TULIP_NAPI_HW_MITIGATION=y
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_ULI526X=m
# CONFIG_AT1700 is not set
# CONFIG_DEPCA is not set
# CONFIG_HP100 is not set
# CONFIG_NET_ISA is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_AC3200 is not set
# CONFIG_APRICOT is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_CS89x0 is not set
# CONFIG_EEPRO100 is not set
CONFIG_E100=m
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_NE2K_PCI is not set
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
# CONFIG_8139TOO_8129 is not set
CONFIG_8139_OLD_RX_RESET=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
# CONFIG_NET_POCKET is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
CONFIG_E1000=m
CONFIG_E1000_NAPI=y
# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set
# CONFIG_E1000E is not set
# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_R8169 is not set
# CONFIG_SIS190 is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set

#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
CONFIG_IPW2100=m
CONFIG_IPW2100_MONITOR=y
CONFIG_IPW2100_DEBUG=y
CONFIG_IPW2200=m
CONFIG_IPW2200_MONITOR=y
CONFIG_IPW2200_RADIOTAP=y
CONFIG_IPW2200_PROMISCUOUS=y
CONFIG_IPW2200_QOS=y
CONFIG_IPW2200_DEBUG=y
CONFIG_LIBERTAS=m
CONFIG_LIBERTAS_USB=m
# CONFIG_LIBERTAS_SDIO is not set
CONFIG_LIBERTAS_DEBUG=y
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_TMD_HERMES=m
CONFIG_NORTEL_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_ATMEL=m
CONFIG_PCI_ATMEL=m
CONFIG_PRISM54=m
CONFIG_USB_ZD1201=m
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_IWLCORE is not set
# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
CONFIG_HOSTAP_PLX=m
CONFIG_HOSTAP_PCI=m
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set

#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_WAN is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_PLIP is not set
CONFIG_PPP=m
CONFIG_PPP_MULTILINK=y
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPP_MPPE=m
CONFIG_PPPOE=m
CONFIG_PPPOL2TP=m
# CONFIG_SLIP is not set
CONFIG_SLHC=m
# CONFIG_NET_FC is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set

#
# Input device support
#
CONFIG_INPUT=y
CONFIG_INPUT_FF_MEMLESS=m
CONFIG_INPUT_POLLDEV=m

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_PS2_ALPS is not set
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
# CONFIG_MOUSE_PS2_LIFEBOOK is not set
# CONFIG_MOUSE_PS2_TRACKPOINT is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
CONFIG_MOUSE_SERIAL=m
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_INPORT is not set
# CONFIG_MOUSE_LOGIBM is not set
# CONFIG_MOUSE_PC110PAD is not set
# CONFIG_MOUSE_VSXXXAA is not set
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDJOY=m
# CONFIG_JOYSTICK_ZHENHUA is not set
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_JOYSTICK_JOYDUMP=m
CONFIG_JOYSTICK_XPAD=m
CONFIG_JOYSTICK_XPAD_FF=y
CONFIG_INPUT_TABLET=y
# CONFIG_TABLET_USB_ACECAD is not set
CONFIG_TABLET_USB_AIPTEK=m
# CONFIG_TABLET_USB_GTCO is not set
# CONFIG_TABLET_USB_KBTAB is not set
CONFIG_TABLET_USB_WACOM=m
# CONFIG_INPUT_TOUCHSCREEN is not set
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=y
# CONFIG_INPUT_WISTRON_BTNS is not set
# CONFIG_INPUT_ATLAS_BTNS is not set
CONFIG_INPUT_ATI_REMOTE=m
# CONFIG_INPUT_ATI_REMOTE2 is not set
# CONFIG_INPUT_KEYSPAN_REMOTE is not set
CONFIG_INPUT_POWERMATE=m
# CONFIG_INPUT_YEALINK is not set
# CONFIG_INPUT_UINPUT is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
CONFIG_SERIO_SERPORT=m
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PARKBD is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
CONFIG_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
# CONFIG_GAMEPORT_L4 is not set
CONFIG_GAMEPORT_EMU10K1=m
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set

#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_NR_UARTS=3
CONFIG_SERIAL_8250_RUNTIME_UARTS=1
# CONFIG_SERIAL_8250_EXTENDED is not set

#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_LEGACY_PTYS is not set
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_IPMI_HANDLER=y
CONFIG_IPMI_PANIC_EVENT=y
CONFIG_IPMI_PANIC_STRING=y
CONFIG_IPMI_DEVICE_INTERFACE=y
CONFIG_IPMI_SI=y
CONFIG_IPMI_WATCHDOG=y
CONFIG_IPMI_POWEROFF=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_GEODE is not set
CONFIG_HW_RANDOM_VIA=y
CONFIG_NVRAM=m
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_SONYPI is not set
# CONFIG_MWAVE is not set
# CONFIG_PC8736x_GPIO is not set
# CONFIG_NSC_GPIO is not set
# CONFIG_CS5535_GPIO is not set
# CONFIG_RAW_DRIVER is not set
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_TCG_TPM=m
CONFIG_TCG_TIS=m
CONFIG_TCG_NSC=m
CONFIG_TCG_ATMEL=m
CONFIG_TCG_INFINEON=m
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_ALGOPCA=m

#
# I2C Hardware Bus support
#
CONFIG_I2C_ALI1535=m
CONFIG_I2C_ALI1563=m
CONFIG_I2C_ALI15X3=m
CONFIG_I2C_AMD756=m
CONFIG_I2C_AMD756_S4882=m
CONFIG_I2C_AMD8111=m
CONFIG_I2C_I801=m
CONFIG_I2C_I810=m
CONFIG_I2C_PIIX4=m
CONFIG_I2C_NFORCE2=m
CONFIG_I2C_OCORES=m
CONFIG_I2C_PARPORT=m
# CONFIG_I2C_PARPORT_LIGHT is not set
CONFIG_I2C_PROSAVAGE=m
CONFIG_I2C_SAVAGE4=m
CONFIG_I2C_SIMTEC=m
CONFIG_SCx200_ACB=m
CONFIG_I2C_SIS5595=m
CONFIG_I2C_SIS630=m
CONFIG_I2C_SIS96X=m
CONFIG_I2C_TAOS_EVM=m
CONFIG_I2C_STUB=m
CONFIG_I2C_TINY_USB=m
CONFIG_I2C_VIA=m
CONFIG_I2C_VIAPRO=m
CONFIG_I2C_VOODOO3=m
CONFIG_I2C_PCA_ISA=m
# CONFIG_I2C_PCA_PLATFORM is not set

#
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=m
CONFIG_SENSORS_EEPROM=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
CONFIG_SENSORS_PCF8591=m
CONFIG_SENSORS_MAX6875=m
CONFIG_SENSORS_TSL2550=m
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_I2C_DEBUG_CHIP is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y

#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
# CONFIG_SPI_BUTTERFLY is not set
# CONFIG_SPI_LM70_LLP is not set

#
# SPI Protocol Masters
#
CONFIG_SPI_AT25=m
CONFIG_SPI_SPIDEV=m
CONFIG_SPI_TLE62X0=m
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=m
CONFIG_SENSORS_ABITUGURU=m
CONFIG_SENSORS_ABITUGURU3=m
CONFIG_SENSORS_AD7418=m
CONFIG_SENSORS_ADM1021=m
CONFIG_SENSORS_ADM1025=m
CONFIG_SENSORS_ADM1026=m
CONFIG_SENSORS_ADM1029=m
CONFIG_SENSORS_ADM1031=m
CONFIG_SENSORS_ADM9240=m
CONFIG_SENSORS_ADT7470=m
CONFIG_SENSORS_ADT7473=m
CONFIG_SENSORS_K8TEMP=m
CONFIG_SENSORS_ASB100=m
CONFIG_SENSORS_ATXP1=m
CONFIG_SENSORS_DS1621=m
CONFIG_SENSORS_I5K_AMB=m
CONFIG_SENSORS_F71805F=m
CONFIG_SENSORS_F71882FG=m
CONFIG_SENSORS_F75375S=m
CONFIG_SENSORS_FSCHER=m
CONFIG_SENSORS_FSCPOS=m
CONFIG_SENSORS_FSCHMD=m
CONFIG_SENSORS_GL518SM=m
CONFIG_SENSORS_GL520SM=m
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IBMAEM is not set
# CONFIG_SENSORS_IBMPEX is not set
CONFIG_SENSORS_IT87=m
CONFIG_SENSORS_LM63=m
CONFIG_SENSORS_LM70=m
CONFIG_SENSORS_LM75=m
CONFIG_SENSORS_LM77=m
CONFIG_SENSORS_LM78=m
CONFIG_SENSORS_LM80=m
CONFIG_SENSORS_LM83=m
CONFIG_SENSORS_LM85=m
CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
CONFIG_SENSORS_LM92=m
CONFIG_SENSORS_LM93=m
CONFIG_SENSORS_MAX1619=m
CONFIG_SENSORS_MAX6650=m
CONFIG_SENSORS_PC87360=m
CONFIG_SENSORS_PC87427=m
CONFIG_SENSORS_SIS5595=m
CONFIG_SENSORS_DME1737=m
CONFIG_SENSORS_SMSC47M1=m
CONFIG_SENSORS_SMSC47M192=m
CONFIG_SENSORS_SMSC47B397=m
CONFIG_SENSORS_ADS7828=m
CONFIG_SENSORS_THMC50=m
CONFIG_SENSORS_VIA686A=m
CONFIG_SENSORS_VT1211=m
CONFIG_SENSORS_VT8231=m
CONFIG_SENSORS_W83781D=m
CONFIG_SENSORS_W83791D=m
CONFIG_SENSORS_W83792D=m
CONFIG_SENSORS_W83793=m
CONFIG_SENSORS_W83L785TS=m
CONFIG_SENSORS_W83L786NG=m
CONFIG_SENSORS_W83627HF=m
CONFIG_SENSORS_W83627EHF=m
CONFIG_SENSORS_HDAPS=m
# CONFIG_SENSORS_APPLESMC is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
CONFIG_THERMAL=y
CONFIG_THERMAL_HWMON=y
# CONFIG_WATCHDOG is not set

#
# Sonics Silicon Backplane
#
CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set

#
# Multimedia devices
#

#
# Multimedia core support
#
CONFIG_VIDEO_DEV=y
CONFIG_VIDEO_V4L2_COMMON=y
# CONFIG_VIDEO_ALLOW_V4L1 is not set
CONFIG_VIDEO_V4L1_COMPAT=y
# CONFIG_DVB_CORE is not set
CONFIG_VIDEO_MEDIA=y

#
# Multimedia drivers
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=y
# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
CONFIG_MEDIA_TUNER_SIMPLE=y
CONFIG_MEDIA_TUNER_TDA8290=y
CONFIG_MEDIA_TUNER_TDA9887=y
CONFIG_MEDIA_TUNER_TEA5761=y
CONFIG_MEDIA_TUNER_TEA5767=y
CONFIG_MEDIA_TUNER_MT20XX=y
CONFIG_MEDIA_TUNER_XC2028=y
CONFIG_MEDIA_TUNER_XC5000=y
CONFIG_VIDEO_V4L2=y
CONFIG_VIDEOBUF_GEN=m
CONFIG_VIDEOBUF_VMALLOC=m
CONFIG_VIDEO_CAPTURE_DRIVERS=y
# CONFIG_VIDEO_ADV_DEBUG is not set
CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
CONFIG_VIDEO_VIVI=m
# CONFIG_VIDEO_BT848 is not set
# CONFIG_VIDEO_SAA5246A is not set
# CONFIG_VIDEO_SAA5249 is not set
# CONFIG_VIDEO_SAA7134 is not set
# CONFIG_VIDEO_HEXIUM_ORION is not set
# CONFIG_VIDEO_HEXIUM_GEMINI is not set
# CONFIG_VIDEO_CX88 is not set
# CONFIG_VIDEO_CAFE_CCIC is not set
CONFIG_V4L_USB_DRIVERS=y
# CONFIG_USB_VIDEO_CLASS is not set
# CONFIG_VIDEO_PVRUSB2 is not set
# CONFIG_VIDEO_EM28XX is not set
# CONFIG_VIDEO_USBVISION is not set
# CONFIG_USB_ET61X251 is not set
# CONFIG_USB_SN9C102 is not set
# CONFIG_USB_ZC0301 is not set
# CONFIG_USB_ZR364XX is not set
# CONFIG_USB_STKWEBCAM is not set
# CONFIG_SOC_CAMERA is not set
CONFIG_RADIO_ADAPTERS=y
# CONFIG_RADIO_CADET is not set
# CONFIG_RADIO_RTRACK is not set
# CONFIG_RADIO_RTRACK2 is not set
# CONFIG_RADIO_AZTECH is not set
# CONFIG_RADIO_GEMTEK is not set
# CONFIG_RADIO_GEMTEK_PCI is not set
# CONFIG_RADIO_MAXIRADIO is not set
# CONFIG_RADIO_MAESTRO is not set
# CONFIG_RADIO_SF16FMI is not set
# CONFIG_RADIO_SF16FMR2 is not set
# CONFIG_RADIO_TERRATEC is not set
# CONFIG_RADIO_TRUST is not set
# CONFIG_RADIO_TYPHOON is not set
# CONFIG_RADIO_ZOLTRIX is not set
# CONFIG_USB_DSBR is not set
# CONFIG_USB_SI470X is not set
# CONFIG_DAB is not set

#
# Graphics support
#
CONFIG_AGP=m
# CONFIG_AGP_ALI is not set
# CONFIG_AGP_ATI is not set
# CONFIG_AGP_AMD is not set
# CONFIG_AGP_AMD64 is not set
# CONFIG_AGP_INTEL is not set
# CONFIG_AGP_NVIDIA is not set
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_SWORKS is not set
CONFIG_AGP_VIA=m
# CONFIG_AGP_EFFICEON is not set
CONFIG_DRM=m
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=y
CONFIG_FB=y
CONFIG_FIRMWARE_EDID=y
# CONFIG_FB_DDC is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_ASILIANT is not set
# CONFIG_FB_IMSTT is not set
# CONFIG_FB_VGA16 is not set
CONFIG_FB_VESA=y
# CONFIG_FB_EFI is not set
# CONFIG_FB_IMAC is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I810 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_INTEL is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_VIRTUAL is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_BACKLIGHT_CORGI is not set
# CONFIG_BACKLIGHT_PROGEAR is not set

#
# Display device support
#
CONFIG_DISPLAY_SUPPORT=y

#
# Display hardware drivers
#

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_VIDEO_SELECT=y
# CONFIG_MDA_CONSOLE is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FB_CON_DECOR is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_LOGO=y
CONFIG_LOGO_LINUX_MONO=y
CONFIG_LOGO_LINUX_VGA16=y
CONFIG_LOGO_LINUX_CLUT224=y

#
# Sound
#
CONFIG_SOUND=y

#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_SEQ_DUMMY=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y

#
# Generic devices
#
# CONFIG_SND_PCSP is not set
CONFIG_SND_MPU401_UART=y
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=y
# CONFIG_SND_DUMMY is not set
CONFIG_SND_VIRMIDI=m
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_MTS64 is not set
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_PORTMAN2X4 is not set
CONFIG_SND_CS4231_LIB=m
CONFIG_SND_SB_COMMON=m
CONFIG_SND_SB16_DSP=m

#
# ISA devices
#
# CONFIG_SND_ADLIB is not set
# CONFIG_SND_AD1816A is not set
# CONFIG_SND_AD1848 is not set
# CONFIG_SND_ALS100 is not set
# CONFIG_SND_AZT2320 is not set
# CONFIG_SND_CMI8330 is not set
# CONFIG_SND_CS4231 is not set
# CONFIG_SND_CS4232 is not set
# CONFIG_SND_CS4236 is not set
# CONFIG_SND_DT019X is not set
# CONFIG_SND_ES968 is not set
# CONFIG_SND_ES1688 is not set
# CONFIG_SND_ES18XX is not set
# CONFIG_SND_SC6000 is not set
# CONFIG_SND_GUSCLASSIC is not set
# CONFIG_SND_GUSEXTREME is not set
# CONFIG_SND_GUSMAX is not set
# CONFIG_SND_INTERWAVE is not set
# CONFIG_SND_INTERWAVE_STB is not set
# CONFIG_SND_OPL3SA2 is not set
# CONFIG_SND_OPTI92X_AD1848 is not set
# CONFIG_SND_OPTI92X_CS4231 is not set
# CONFIG_SND_OPTI93X is not set
# CONFIG_SND_MIRO is not set
# CONFIG_SND_SB8 is not set
# CONFIG_SND_SB16 is not set
# CONFIG_SND_SBAWE is not set
# CONFIG_SND_SGALAXY is not set
# CONFIG_SND_SSCAPE is not set
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_WAVEFRONT_FIRMWARE_IN_KERNEL=y

#
# PCI devices
#
CONFIG_SND_AD1889=m
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
CONFIG_SND_CA0106=m
CONFIG_SND_CMIPCI=m
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
CONFIG_SND_CS5530=m
CONFIG_SND_CS5535AUDIO=m
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
CONFIG_SND_EMU10K1=m
CONFIG_SND_EMU10K1X=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
# CONFIG_SND_HDA_INTEL is not set
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_HIFIER is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SIS7019 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
CONFIG_SND_VIA82XX=y
CONFIG_SND_VIA82XX_MODEM=y
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_AC97_POWER_SAVE=y
CONFIG_SND_AC97_POWER_SAVE_DEFAULT=30

#
# SPI devices
#

#
# USB devices
#
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_USB_USX2Y=m
CONFIG_SND_USB_CAIAQ=m
CONFIG_SND_USB_CAIAQ_INPUT=y

#
# System on Chip audio support
#
# CONFIG_SND_SOC is not set

#
# ALSA SoC audio for Freescale SOCs
#

#
# SoC Audio for the Texas Instruments OMAP
#

#
# Open Sound System
#
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=y
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
# CONFIG_HID_DEBUG is not set
# CONFIG_HIDRAW is not set

#
# USB Input Devices
#
CONFIG_USB_HID=m
# CONFIG_USB_HIDINPUT_POWERBOOK is not set
# CONFIG_HID_FF is not set
CONFIG_USB_HIDDEV=y

#
# USB HID Boot Protocol drivers
#
CONFIG_USB_KBD=m
CONFIG_USB_MOUSE=m
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_DEVICE_CLASS is not set
CONFIG_USB_DYNAMIC_MINORS=y
CONFIG_USB_SUSPEND=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=m
# CONFIG_USB_WDM is not set

#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
#

#
# may also be needed; see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
CONFIG_USB_LIBUSUAL=y

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USB_MON is not set

#
# USB port drivers
#
# CONFIG_USB_USS720 is not set
CONFIG_USB_SERIAL=m
CONFIG_USB_EZUSB=y
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_AIRCABLE=m
CONFIG_USB_SERIAL_AIRPRIME=m
CONFIG_USB_SERIAL_ARK3116=m
# CONFIG_USB_SERIAL_BELKIN is not set
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
CONFIG_USB_SERIAL_CP2101=m
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
CONFIG_USB_SERIAL_FUNSOFT=m
# CONFIG_USB_SERIAL_VISOR is not set
# CONFIG_USB_SERIAL_IPAQ is not set
# CONFIG_USB_SERIAL_IR is not set
# CONFIG_USB_SERIAL_EDGEPORT is not set
# CONFIG_USB_SERIAL_EDGEPORT_TI is not set
CONFIG_USB_SERIAL_GARMIN=m
CONFIG_USB_SERIAL_IPW=m
# CONFIG_USB_SERIAL_IUU is not set
# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set
# CONFIG_USB_SERIAL_KEYSPAN is not set
# CONFIG_USB_SERIAL_KLSI is not set
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
# CONFIG_USB_SERIAL_MCT_U232 is not set
CONFIG_USB_SERIAL_MOS7720=m
CONFIG_USB_SERIAL_MOS7840=m
# CONFIG_USB_SERIAL_MOTOROLA is not set
CONFIG_USB_SERIAL_NAVMAN=m
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
CONFIG_USB_SERIAL_OPTION=m
CONFIG_USB_SERIAL_OMNINET=m
# CONFIG_USB_SERIAL_DEBUG is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_BERRY_CHARGE is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
CONFIG_USB_TRANCEVIBRATOR=m
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_GADGET is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set

#
# MMC/SD Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set

#
# MMC/SD Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
# CONFIG_LEDS_CLASS is not set

#
# LED drivers
#

#
# LED Triggers
#
CONFIG_LEDS_TRIGGERS=y
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
# CONFIG_RTC_DEBUG is not set

#
# RTC interfaces
#
CONFIG_RTC_INTF_SYSFS=y
CONFIG_RTC_INTF_PROC=y
CONFIG_RTC_INTF_DEV=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
# CONFIG_RTC_DRV_TEST is not set

#
# I2C RTC drivers
#
CONFIG_RTC_DRV_DS1307=m
CONFIG_RTC_DRV_DS1374=m
CONFIG_RTC_DRV_DS1672=m
CONFIG_RTC_DRV_MAX6900=m
CONFIG_RTC_DRV_RS5C372=m
CONFIG_RTC_DRV_ISL1208=m
CONFIG_RTC_DRV_X1205=m
CONFIG_RTC_DRV_PCF8563=m
CONFIG_RTC_DRV_PCF8583=m
CONFIG_RTC_DRV_M41T80=m
CONFIG_RTC_DRV_M41T80_WDT=y
CONFIG_RTC_DRV_S35390A=m
CONFIG_RTC_DRV_FM3130=m

#
# SPI RTC drivers
#
CONFIG_RTC_DRV_MAX6902=m
CONFIG_RTC_DRV_R9701=m
CONFIG_RTC_DRV_RS5C348=m

#
# Platform RTC drivers
#
CONFIG_RTC_DRV_CMOS=m
CONFIG_RTC_DRV_DS1511=m
CONFIG_RTC_DRV_DS1553=m
CONFIG_RTC_DRV_DS1742=m
CONFIG_RTC_DRV_STK17TA8=m
CONFIG_RTC_DRV_M48T86=m
CONFIG_RTC_DRV_M48T59=m
CONFIG_RTC_DRV_V3020=m

#
# on-CPU RTC drivers
#
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set

#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_EFI_VARS=m
# CONFIG_DELL_RBU is not set
# CONFIG_DCDBAS is not set
CONFIG_DMIID=y
# CONFIG_ISCSI_IBFT_FIND is not set

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
CONFIG_EXT2_FS_XIP=y
CONFIG_FS_XIP=y
CONFIG_EXT3_FS=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
CONFIG_EXT4DEV_FS=m
CONFIG_EXT4DEV_FS_XATTR=y
CONFIG_EXT4DEV_FS_POSIX_ACL=y
CONFIG_EXT4DEV_FS_SECURITY=y
CONFIG_JBD=y
CONFIG_JBD2=m
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
CONFIG_REISERFS_PROC_INFO=y
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_XFS_FS=m
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_GFS2_FS_LOCKING_NOLOCK=m
CONFIG_GFS2_FS_LOCKING_DLM=m
# CONFIG_OCFS2_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_QUOTACTL=y
# CONFIG_AUTOFS_FS is not set
CONFIG_AUTOFS4_FS=y
CONFIG_FUSE_FS=y
CONFIG_GENERIC_ACL=y

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
CONFIG_NTFS_RW=y

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_XATTR=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
CONFIG_CONFIGFS_FS=y

#
# Miscellaneous filesystems
#
# CONFIG_ADFS_FS is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_HFSPLUS_FS=m
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
CONFIG_CRAMFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_EMBEDDED=y
CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3
# CONFIG_VXFS_FS is not set
CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
CONFIG_UFS_FS=m
CONFIG_UFS_FS_WRITE=y
# CONFIG_UFS_DEBUG is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V3=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_NFSD=m
CONFIG_NFSD_V2_ACL=y
CONFIG_NFSD_V3=y
CONFIG_NFSD_V3_ACL=y
CONFIG_NFSD_V4=y
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_NFS_ACL_SUPPORT=m
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
CONFIG_SUNRPC_BIND34=y
CONFIG_RPCSEC_GSS_KRB5=m
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
CONFIG_CIFS_EXPERIMENTAL=y
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
CONFIG_MINIX_SUBPARTITION=y
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="UTF-8"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
CONFIG_NLS_CODEPAGE_936=y
CONFIG_NLS_CODEPAGE_950=y
CONFIG_NLS_CODEPAGE_932=y
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
CONFIG_DLM=m
# CONFIG_DLM_DEBUG is not set

#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
CONFIG_UNUSED_SYMBOLS=y
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_DEBUG_SLAB is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_FRAME_POINTER is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
# CONFIG_NONPROMISC_DEVMEM is not set
CONFIG_EARLY_PRINTK=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
# CONFIG_DEBUG_NX_TEST is not set
CONFIG_4KSTACKS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
CONFIG_DOUBLEFAULT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
# CONFIG_CPA_DEBUG is not set

#
# Security options
#
# CONFIG_KEYS is not set
CONFIG_SECURITY=y
CONFIG_SECURITY_NETWORK=y
CONFIG_SECURITY_NETWORK_XFRM=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_FILE_CAPABILITIES=y
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
# CONFIG_SECURITY_SELINUX is not set
CONFIG_SECURITY_SMACK=y
CONFIG_XOR_BLOCKS=m
CONFIG_ASYNC_CORE=m
CONFIG_ASYNC_MEMCPY=m
CONFIG_ASYNC_XOR=m
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_XCBC=m

#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=y
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=y

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
CONFIG_CRYPTO_AES_586=y
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=y
CONFIG_CRYPTO_CAMELLIA=m
CONFIG_CRYPTO_CAST5=m
CONFIG_CRYPTO_CAST6=m
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SALSA20_586 is not set
# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=y
CONFIG_CRYPTO_TWOFISH_586=y

#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
CONFIG_CRYPTO_LZO=y
# CONFIG_CRYPTO_HW is not set
CONFIG_HAVE_KVM=y
# CONFIG_VIRTUALIZATION is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
CONFIG_LIBCRC32C=y
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-27 20:14     ` Rob MacKinnon
@ 2008-10-27 20:25       ` Stephen Smalley
  2008-10-27 20:53         ` Andreas Gruenbacher
  2008-10-27 21:00         ` Rob MacKinnon
  0 siblings, 2 replies; 15+ messages in thread
From: Stephen Smalley @ 2008-10-27 20:25 UTC (permalink / raw)
  To: Rob MacKinnon
  Cc: Andreas Gruenbacher, hpa, hugh, linux-kernel, rob.mackinnon,
	Casey Schaufler

On Mon, 2008-10-27 at 13:14 -0700, Rob MacKinnon wrote:
> Andreas Gruenbacher wrote:
> > On Sunday, 26 October 2008 13:26:35 Hugh Dickins wrote:
> >> On Sat, 25 Oct 2008, Rob MacKinnon wrote:
> >>> The background: So during the initial configuration of a box I enabled
> >>> the xattr flags for ext3 and options of xattr in coreutils, and at the
> >>> time didn't realize that I'd hit a snag that would finally annoy me
> >>> enough after a month of getting a non-fatal error messages from cp "cp:
> >>> listing attributes of `/dev/null`: Invalid argument" to spend half a day
> >>> researching the cause and a potential solution.
> >>>
> >>> Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
> >>> Problem: the resulting tmpfs has no xattr support.
> >>> Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
> >>> xattr support, cp freaks.
> >>>
> >>> Is there sometime in the forseable future when the tmpfs module will
> >>> support for xattrs in the stable branch, or should I "holler at the
> >>> maintainers of coreutils to fix their broken code in cp". Even better
> >>> (and I like this option the most) a little of both?
> >> I've not seen "cp: listing attributes of `/dev/null': Invalid argument"
> >> messages (or.. do I have a dim recollection of them once upon a time?).
> >> I would certainly get irritated by them if I did, and want to fix them.
> >> I tried "cp /dev/null temp" on a few distros just now but not seen it.
> > 
> > As Hugh pointed out already, tmpfs does support xattrs since quite a while, so 
> > enabling that should fix the symptoms. Independent of that, cp must of course 
> > work correctly on filesystems that don't have xattrs. Those filesystems are 
> > not supposed to return EINVAL, though.
> > 
> > Could you please run cp under strace to show us what's happening at the 
> > syscall level (and perhaps under ltrace in addition to see the library level 
> > as well)?
> > 
> > If the error happens at the syscall level (*listxattr), then which kernel is 
> > it exactly, and where can I find its sources?
> > 
> 
> Thanks Andreas, Hugh & HPA
> 
> First off, thanks for looking into this.  After googling around, hitting
> forums and such and not getting any answers, this list seemed the best
> place to come to ask.
> 
> Now onward to business...I can say that I too was under the general
> understanding that xattr for tmpfs was added at 2.6.10...and was still
> currently supported.  Unfortunately I already have the config flags set
> (as seen below, for a full config set attached) so there is a continued
> confusion in my mind why this is still plaguing me.
> 
> I've had several friends compare what was going on, and of them they
> were all running rhel and cent (most with no udev support so the
> comparison didn't help at all).
> 
> I'll start out with distro info and the like...
> `uname -a`="Linux shin-yuko 2.6.26-gentoo-r2 #1 SMP PREEMPT Wed Oct 22
> 16:31:40 PDT 2008 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel
> GNU/Linux"
> 
> coreutils-version="coreutils-6.12-r2"
> 
> My current config does have the following set:
> 	CONFIG_TMPFS=y
> 	CONFIG_TMPFS_POSIX_ACL=y
> 	CONFIG_SHMEM=y
> 
> Output from `strace /bin/cp /dev/null /root/temp`= #see attachment
> Output from `ltrace -CS /bin/cp /dev/null /root/temp`= #see attachment
> 
> Output from `attr -l /dev/null`=Segfault (hmmm...lemme look at a strace
> and ltrace of that too)
> 
> `strace attr -l /dev/null`= #see attachment
> `ltrace -CS /bin/attr -l /dev/null`= #see attachment
> 
> Kernel source can be attained from:
> http://distfiles.gentoo.org/distfiles/linux-2.6.26.tar.bz2
> 
> Patches:
> http://sources.gentoo.org/viewcvs.py/linux-patches/genpatches-2.6/trunk/2.6.26/
> 
> I know this is silly but, setfattr and getfattr obviously don't work
> either...just thought it was worth mentioning.

Looks like a bug in Smack's implementation of the inode_listsecurity
hook to me.  Did you mean to enable Smack in your kernel config?

-- 
Stephen Smalley
National Security Agency


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-27 20:25       ` Stephen Smalley
@ 2008-10-27 20:53         ` Andreas Gruenbacher
  2008-10-27 21:12           ` Rob MacKinnon
  2008-10-27 21:00         ` Rob MacKinnon
  1 sibling, 1 reply; 15+ messages in thread
From: Andreas Gruenbacher @ 2008-10-27 20:53 UTC (permalink / raw)
  To: Stephen Smalley
  Cc: Rob MacKinnon, hpa, hugh, linux-kernel, rob.mackinnon, Casey Schaufler

On Monday, 27 October 2008 21:25:31 Stephen Smalley wrote:
> Looks like a bug in Smack's implementation of the inode_listsecurity
> hook to me.  Did you mean to enable Smack in your kernel config?

Yes, there is at least one bug there; this kernel is broken. You may want to 
try booting with a kernel command line option like "security=none", which 
*should* turn smack off.

Andreas

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-27 20:25       ` Stephen Smalley
  2008-10-27 20:53         ` Andreas Gruenbacher
@ 2008-10-27 21:00         ` Rob MacKinnon
  2008-10-27 21:54           ` Casey Schaufler
  1 sibling, 1 reply; 15+ messages in thread
From: Rob MacKinnon @ 2008-10-27 21:00 UTC (permalink / raw)
  To: Stephen Smalley
  Cc: rob.mackinnon, Andreas Gruenbacher, hpa, hugh, linux-kernel,
	Casey Schaufler

Stephen Smalley wrote:
> On Mon, 2008-10-27 at 13:14 -0700, Rob MacKinnon wrote:
>> Andreas Gruenbacher wrote:
>>> On Sunday, 26 October 2008 13:26:35 Hugh Dickins wrote:
>>>> On Sat, 25 Oct 2008, Rob MacKinnon wrote:
>>>>> The background: So during the initial configuration of a box I enabled
>>>>> the xattr flags for ext3 and options of xattr in coreutils, and at the
>>>>> time didn't realize that I'd hit a snag that would finally annoy me
>>>>> enough after a month of getting a non-fatal error messages from cp "cp:
>>>>> listing attributes of `/dev/null`: Invalid argument" to spend half a day
>>>>> researching the cause and a potential solution.
>>>>>
>>>>> Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
>>>>> Problem: the resulting tmpfs has no xattr support.
>>>>> Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
>>>>> xattr support, cp freaks.
>>>>>
>>>>> Is there sometime in the forseable future when the tmpfs module will
>>>>> support for xattrs in the stable branch, or should I "holler at the
>>>>> maintainers of coreutils to fix their broken code in cp". Even better
>>>>> (and I like this option the most) a little of both?
>>>> I've not seen "cp: listing attributes of `/dev/null': Invalid argument"
>>>> messages (or.. do I have a dim recollection of them once upon a time?).
>>>> I would certainly get irritated by them if I did, and want to fix them.
>>>> I tried "cp /dev/null temp" on a few distros just now but not seen it.
>>> As Hugh pointed out already, tmpfs does support xattrs since quite a while, so 
>>> enabling that should fix the symptoms. Independent of that, cp must of course 
>>> work correctly on filesystems that don't have xattrs. Those filesystems are 
>>> not supposed to return EINVAL, though.
>>>
>>> Could you please run cp under strace to show us what's happening at the 
>>> syscall level (and perhaps under ltrace in addition to see the library level 
>>> as well)?
>>>
>>> If the error happens at the syscall level (*listxattr), then which kernel is 
>>> it exactly, and where can I find its sources?
>>>
>> Thanks Andreas, Hugh & HPA
>>
>> First off, thanks for looking into this.  After googling around, hitting
>> forums and such and not getting any answers, this list seemed the best
>> place to come to ask.
>>
>> Now onward to business...I can say that I too was under the general
>> understanding that xattr for tmpfs was added at 2.6.10...and was still
>> currently supported.  Unfortunately I already have the config flags set
>> (as seen below, for a full config set attached) so there is a continued
>> confusion in my mind why this is still plaguing me.
>>
>> I've had several friends compare what was going on, and of them they
>> were all running rhel and cent (most with no udev support so the
>> comparison didn't help at all).
>>
>> I'll start out with distro info and the like...
>> `uname -a`="Linux shin-yuko 2.6.26-gentoo-r2 #1 SMP PREEMPT Wed Oct 22
>> 16:31:40 PDT 2008 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel
>> GNU/Linux"
>>
>> coreutils-version="coreutils-6.12-r2"
>>
>> My current config does have the following set:
>> 	CONFIG_TMPFS=y
>> 	CONFIG_TMPFS_POSIX_ACL=y
>> 	CONFIG_SHMEM=y
>>
>> Output from `strace /bin/cp /dev/null /root/temp`= #see attachment
>> Output from `ltrace -CS /bin/cp /dev/null /root/temp`= #see attachment
>>
>> Output from `attr -l /dev/null`=Segfault (hmmm...lemme look at a strace
>> and ltrace of that too)
>>
>> `strace attr -l /dev/null`= #see attachment
>> `ltrace -CS /bin/attr -l /dev/null`= #see attachment
>>
>> Kernel source can be attained from:
>> http://distfiles.gentoo.org/distfiles/linux-2.6.26.tar.bz2
>>
>> Patches:
>> http://sources.gentoo.org/viewcvs.py/linux-patches/genpatches-2.6/trunk/2.6.26/
>>
>> I know this is silly but, setfattr and getfattr obviously don't work
>> either...just thought it was worth mentioning.
> 
> Looks like a bug in Smack's implementation of the inode_listsecurity
> hook to me.  Did you mean to enable Smack in your kernel config?
> 

I had intensionally flipped CONFIG_SECURITY_SMACK to "y".  I'm used to
running hardened with GRSec and RBAC (ot: but found the gentoo
versioning was so far behind / and me being lazy and not wanting to
manually do the patching / I dropped using hardened sources) so when I
saw the option for what sounded like a good compromise I jumped at it.
Looks like I did a good thing too having uncovered a problem. :)

-- Rob

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-27 20:53         ` Andreas Gruenbacher
@ 2008-10-27 21:12           ` Rob MacKinnon
  2008-10-28  5:51             ` Casey Schaufler
  0 siblings, 1 reply; 15+ messages in thread
From: Rob MacKinnon @ 2008-10-27 21:12 UTC (permalink / raw)
  To: Andreas Gruenbacher
  Cc: Stephen Smalley, rob.mackinnon, hpa, hugh, linux-kernel, Casey Schaufler

Andreas Gruenbacher wrote:
> On Monday, 27 October 2008 21:25:31 Stephen Smalley wrote:
>> Looks like a bug in Smack's implementation of the inode_listsecurity
>> hook to me.  Did you mean to enable Smack in your kernel config?
> 
> Yes, there is at least one bug there; this kernel is broken. You may want to 
> try booting with a kernel command line option like "security=none", which 
> *should* turn smack off.
> 
> Andreas

All,

Indeed the kernel cmdline option security=none did disable smack. So
atleast that works. Thank you all for helping me track this down.  I can
now return to updating packages (some of which have been waiting
patiently for this to be cleared up)!  Though I will be looking forward
to this feature working as it was intended. ;)  Let me know if there is
a bug # assigned and I'll quietly return to lurking... ;)

-- Rob

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-27 21:00         ` Rob MacKinnon
@ 2008-10-27 21:54           ` Casey Schaufler
  0 siblings, 0 replies; 15+ messages in thread
From: Casey Schaufler @ 2008-10-27 21:54 UTC (permalink / raw)
  To: Rob MacKinnon
  Cc: Stephen Smalley, rob.mackinnon, Andreas Gruenbacher, hpa, hugh,
	linux-kernel

Rob MacKinnon wrote:
> Stephen Smalley wrote:
>   
>> On Mon, 2008-10-27 at 13:14 -0700, Rob MacKinnon wrote:
>>     
>>> Andreas Gruenbacher wrote:
>>>       
>>>> On Sunday, 26 October 2008 13:26:35 Hugh Dickins wrote:
>>>>         
>>>>> On Sat, 25 Oct 2008, Rob MacKinnon wrote:
>>>>>           
>>>>>> The background: So during the initial configuration of a box I enabled
>>>>>> the xattr flags for ext3 and options of xattr in coreutils, and at the
>>>>>> time didn't realize that I'd hit a snag that would finally annoy me
>>>>>> enough after a month of getting a non-fatal error messages from cp "cp:
>>>>>> listing attributes of `/dev/null`: Invalid argument" to spend half a day
>>>>>> researching the cause and a potential solution.
>>>>>>
>>>>>> Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
>>>>>> Problem: the resulting tmpfs has no xattr support.
>>>>>> Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
>>>>>> xattr support, cp freaks.
>>>>>>
>>>>>> Is there sometime in the forseable future when the tmpfs module will
>>>>>> support for xattrs in the stable branch, or should I "holler at the
>>>>>> maintainers of coreutils to fix their broken code in cp". Even better
>>>>>> (and I like this option the most) a little of both?
>>>>>>             
>>>>> I've not seen "cp: listing attributes of `/dev/null': Invalid argument"
>>>>> messages (or.. do I have a dim recollection of them once upon a time?).
>>>>> I would certainly get irritated by them if I did, and want to fix them.
>>>>> I tried "cp /dev/null temp" on a few distros just now but not seen it.
>>>>>           
>>>> As Hugh pointed out already, tmpfs does support xattrs since quite a while, so 
>>>> enabling that should fix the symptoms. Independent of that, cp must of course 
>>>> work correctly on filesystems that don't have xattrs. Those filesystems are 
>>>> not supposed to return EINVAL, though.
>>>>
>>>> Could you please run cp under strace to show us what's happening at the 
>>>> syscall level (and perhaps under ltrace in addition to see the library level 
>>>> as well)?
>>>>
>>>> If the error happens at the syscall level (*listxattr), then which kernel is 
>>>> it exactly, and where can I find its sources?
>>>>
>>>>         
>>> Thanks Andreas, Hugh & HPA
>>>
>>> First off, thanks for looking into this.  After googling around, hitting
>>> forums and such and not getting any answers, this list seemed the best
>>> place to come to ask.
>>>
>>> Now onward to business...I can say that I too was under the general
>>> understanding that xattr for tmpfs was added at 2.6.10...and was still
>>> currently supported.  Unfortunately I already have the config flags set
>>> (as seen below, for a full config set attached) so there is a continued
>>> confusion in my mind why this is still plaguing me.
>>>
>>> I've had several friends compare what was going on, and of them they
>>> were all running rhel and cent (most with no udev support so the
>>> comparison didn't help at all).
>>>
>>> I'll start out with distro info and the like...
>>> `uname -a`="Linux shin-yuko 2.6.26-gentoo-r2 #1 SMP PREEMPT Wed Oct 22
>>> 16:31:40 PDT 2008 i686 Intel(R) Pentium(R) 4 CPU 2.80GHz GenuineIntel
>>> GNU/Linux"
>>>
>>> coreutils-version="coreutils-6.12-r2"
>>>
>>> My current config does have the following set:
>>> 	CONFIG_TMPFS=y
>>> 	CONFIG_TMPFS_POSIX_ACL=y
>>> 	CONFIG_SHMEM=y
>>>
>>> Output from `strace /bin/cp /dev/null /root/temp`= #see attachment
>>> Output from `ltrace -CS /bin/cp /dev/null /root/temp`= #see attachment
>>>
>>> Output from `attr -l /dev/null`=Segfault (hmmm...lemme look at a strace
>>> and ltrace of that too)
>>>
>>> `strace attr -l /dev/null`= #see attachment
>>> `ltrace -CS /bin/attr -l /dev/null`= #see attachment
>>>
>>> Kernel source can be attained from:
>>> http://distfiles.gentoo.org/distfiles/linux-2.6.26.tar.bz2
>>>
>>> Patches:
>>> http://sources.gentoo.org/viewcvs.py/linux-patches/genpatches-2.6/trunk/2.6.26/
>>>
>>> I know this is silly but, setfattr and getfattr obviously don't work
>>> either...just thought it was worth mentioning.
>>>       
>> Looks like a bug in Smack's implementation of the inode_listsecurity
>> hook to me.  Did you mean to enable Smack in your kernel config?
>>
>>     
>
> I had intensionally flipped CONFIG_SECURITY_SMACK to "y".

Thank you!

>   I'm used to
> running hardened with GRSec and RBAC (ot: but found the gentoo
> versioning was so far behind / and me being lazy and not wanting to
> manually do the patching / I dropped using hardened sources) so when I
> saw the option for what sounded like a good compromise I jumped at it.
> Looks like I did a good thing too having uncovered a problem. :)
>
> -- Rob

Yes indeed, and thank you. Stephen has already suggested a fix, I just
need to do some code, build, and test once I get to Smack time.


^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-27 21:12           ` Rob MacKinnon
@ 2008-10-28  5:51             ` Casey Schaufler
  2008-10-29 15:15               ` [PATCH] smack inode_listsecurity fix Casey Schaufler
  2008-10-29 15:56               ` tmpfs support of xattrs? Rob MacKinnon
  0 siblings, 2 replies; 15+ messages in thread
From: Casey Schaufler @ 2008-10-28  5:51 UTC (permalink / raw)
  To: Rob MacKinnon
  Cc: Andreas Gruenbacher, Stephen Smalley, rob.mackinnon, hpa, hugh,
	linux-kernel, casey

Rob MacKinnon wrote:
> Andreas Gruenbacher wrote:
>   
>> On Monday, 27 October 2008 21:25:31 Stephen Smalley wrote:
>>     
>>> Looks like a bug in Smack's implementation of the inode_listsecurity
>>> hook to me.  Did you mean to enable Smack in your kernel config?
>>>       
>> Yes, there is at least one bug there; this kernel is broken. You may want to 
>> try booting with a kernel command line option like "security=none", which 
>> *should* turn smack off.
>>
>> Andreas
>>     
>
> All,
>
> Indeed the kernel cmdline option security=none did disable smack. So
> atleast that works. Thank you all for helping me track this down.  I can
> now return to updating packages (some of which have been waiting
> patiently for this to be cleared up)!  Though I will be looking forward
> to this feature working as it was intended. ;)  Let me know if there is
> a bug # assigned and I'll quietly return to lurking... ;

It looks like a trivial fix and the patch is here. I have just started
testing it myself, but if I don't send it now it will be Wednesday before
I do. No sign-off because I haven't verified it, but I would be delighted
if you would pass judgement on its efficacy. Thank you.


----

diff -uprN -X linux-2.6/Documentation/dontdiff linux-2.6/security/smack/smack_lsm.c linux-smack/security/smack/smack_lsm.c
--- linux-2.6/security/smack/smack_lsm.c	2008-10-26 17:37:08.000000000 -0700
+++ linux-smack/security/smack/smack_lsm.c	2008-10-26 19:11:23.000000000 -0700
@@ -763,13 +763,11 @@ static int smack_inode_getsecurity(const
 static int smack_inode_listsecurity(struct inode *inode, char *buffer,
 				    size_t buffer_size)
 {
-	int len = strlen(XATTR_NAME_SMACK);
+	int len = sizeof(XATTR_NAME_SMACK);
 
-	if (buffer != NULL && len <= buffer_size) {
+	if (buffer != NULL && len <= buffer_size)
 		memcpy(buffer, XATTR_NAME_SMACK, len);
-		return len;
-	}
-	return -EINVAL;
+	return len;
 }
 
 /**


^ permalink raw reply	[flat|nested] 15+ messages in thread

* [PATCH] smack inode_listsecurity fix
  2008-10-28  5:51             ` Casey Schaufler
@ 2008-10-29 15:15               ` Casey Schaufler
  2008-10-29 15:56               ` tmpfs support of xattrs? Rob MacKinnon
  1 sibling, 0 replies; 15+ messages in thread
From: Casey Schaufler @ 2008-10-29 15:15 UTC (permalink / raw)
  To: linux-kernel, linux-security-module
  Cc: Rob MacKinnon, Andreas Gruenbacher, Stephen Smalley,
	rob.mackinnon, hpa, hugh

From: Casey Schaufler <casey@schaufler-ca.com>

This patch fixes the problem known by "tmpfs support of xattrs?"
which is in fact the result of a bad implementation of the
inode_listsecurity LSM hook in Smack. Thanks to Stephen Smalley,
who identified the problem and all but coded the fix before I'd
even heard about it.

Signed-off-by: Casey Schaufler <casey@schaufler-ca.com>

---

 security/smack/smack_lsm.c |    8 +++-----
 1 file changed, 3 insertions(+), 5 deletions(-)

diff -uprN -X linux-2.6/Documentation/dontdiff linux-2.6/security/smack/smack_lsm.c linux-smack/security/smack/smack_lsm.c
--- linux-2.6/security/smack/smack_lsm.c	2008-10-26 17:37:08.000000000 -0700
+++ linux-smack/security/smack/smack_lsm.c	2008-10-26 19:11:23.000000000 -0700
@@ -763,13 +763,11 @@ static int smack_inode_getsecurity(const
 static int smack_inode_listsecurity(struct inode *inode, char *buffer,
 				    size_t buffer_size)
 {
-	int len = strlen(XATTR_NAME_SMACK);
+	int len = sizeof(XATTR_NAME_SMACK);
 
-	if (buffer != NULL && len <= buffer_size) {
+	if (buffer != NULL && len <= buffer_size)
 		memcpy(buffer, XATTR_NAME_SMACK, len);
-		return len;
-	}
-	return -EINVAL;
+	return len;
 }
 
 /**




^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-28  5:51             ` Casey Schaufler
  2008-10-29 15:15               ` [PATCH] smack inode_listsecurity fix Casey Schaufler
@ 2008-10-29 15:56               ` Rob MacKinnon
  2008-10-29 16:12                 ` Casey Schaufler
  1 sibling, 1 reply; 15+ messages in thread
From: Rob MacKinnon @ 2008-10-29 15:56 UTC (permalink / raw)
  To: Casey Schaufler
  Cc: rob.mackinnon, Andreas Gruenbacher, Stephen Smalley, hpa, hugh,
	linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Casey Schaufler wrote:
> Rob MacKinnon wrote:
>> Andreas Gruenbacher wrote:
>>  
>>> On Monday, 27 October 2008 21:25:31 Stephen Smalley wrote:
>>>    
>>>> Looks like a bug in Smack's implementation of the inode_listsecurity
>>>> hook to me.  Did you mean to enable Smack in your kernel config?
>>>>       
>>> Yes, there is at least one bug there; this kernel is broken. You may
>>> want to try booting with a kernel command line option like
>>> "security=none", which *should* turn smack off.
>>>
>>> Andreas
>>>     
>>
>> All,
>>
>> Indeed the kernel cmdline option security=none did disable smack. So
>> atleast that works. Thank you all for helping me track this down.  I can
>> now return to updating packages (some of which have been waiting
>> patiently for this to be cleared up)!  Though I will be looking forward
>> to this feature working as it was intended. ;)  Let me know if there is
>> a bug # assigned and I'll quietly return to lurking... ;
> 
> It looks like a trivial fix and the patch is here. I have just started
> testing it myself, but if I don't send it now it will be Wednesday before
> I do. No sign-off because I haven't verified it, but I would be delighted
> if you would pass judgement on its efficacy. Thank you.
> 

All,

Applied, compiled, and tested clean on a P4 Prescott. I'll try this a
little later on my x64. Thank you for this fix, and thank you all for
just a fast response.

- -- Rob

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
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=lrma
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 15+ messages in thread

* Re: tmpfs support of xattrs?
  2008-10-29 15:56               ` tmpfs support of xattrs? Rob MacKinnon
@ 2008-10-29 16:12                 ` Casey Schaufler
  0 siblings, 0 replies; 15+ messages in thread
From: Casey Schaufler @ 2008-10-29 16:12 UTC (permalink / raw)
  To: Rob MacKinnon
  Cc: rob.mackinnon, Andreas Gruenbacher, Stephen Smalley, hpa, hugh,
	linux-kernel

Rob MacKinnon wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Casey Schaufler wrote:
>   
>> Rob MacKinnon wrote:
>>     
>>> Andreas Gruenbacher wrote:
>>>  
>>>       
>>>> On Monday, 27 October 2008 21:25:31 Stephen Smalley wrote:
>>>>    
>>>>         
>>>>> Looks like a bug in Smack's implementation of the inode_listsecurity
>>>>> hook to me.  Did you mean to enable Smack in your kernel config?
>>>>>       
>>>>>           
>>>> Yes, there is at least one bug there; this kernel is broken. You may
>>>> want to try booting with a kernel command line option like
>>>> "security=none", which *should* turn smack off.
>>>>
>>>> Andreas
>>>>     
>>>>         
>>> All,
>>>
>>> Indeed the kernel cmdline option security=none did disable smack. So
>>> atleast that works. Thank you all for helping me track this down.  I can
>>> now return to updating packages (some of which have been waiting
>>> patiently for this to be cleared up)!  Though I will be looking forward
>>> to this feature working as it was intended. ;)  Let me know if there is
>>> a bug # assigned and I'll quietly return to lurking... ;
>>>       
>> It looks like a trivial fix and the patch is here. I have just started
>> testing it myself, but if I don't send it now it will be Wednesday before
>> I do. No sign-off because I haven't verified it, but I would be delighted
>> if you would pass judgement on its efficacy. Thank you.
>>
>>     
>
> All,
>
> Applied, compiled, and tested clean on a P4 Prescott. I'll try this a
> little later on my x64. Thank you for this fix, and thank you all for
> just a fast response

We aims to please. Thank you for the work you put in. That, and everyone
who jumped in to help identify the problem.



^ permalink raw reply	[flat|nested] 15+ messages in thread

* tmpfs support of xattrs?
@ 2008-10-25  8:27 Rob MacKinnon
  0 siblings, 0 replies; 15+ messages in thread
From: Rob MacKinnon @ 2008-10-25  8:27 UTC (permalink / raw)
  To: linux-kernel

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

The background: So during the initial configuration of a box I enabled
the xattr flags for ext3 and options of xattr in coreutils, and at the
time didn't realize that I'd hit a snag that would finally annoy me
enough after a month of getting a non-fatal error messages from cp "cp:
listing attributes of `/dev/null`: Invalid argument" to spend half a day
researching the cause and a potential solution.

Setup: udev mounts a tmpfs to /dev then fills it with device nodes.
Problem: the resulting tmpfs has no xattr support.
Therefore: Tmpfs without xattrs, and coreutils  and everywhere else with
xattr support, cp freaks.

Is there sometime in the forseable future when the tmpfs module will
support for xattrs in the stable branch, or should I "holler at the
maintainers of coreutils to fix their broken code in cp". Even better
(and I like this option the most) a little of both?

- -- Rob
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.9 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
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=Ezq7
-----END PGP SIGNATURE-----

^ permalink raw reply	[flat|nested] 15+ messages in thread

end of thread, other threads:[~2008-10-29 16:12 UTC | newest]

Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-10-25  8:49 tmpfs support of xattrs? Rob MacKinnon
2008-10-25 21:59 ` H. Peter Anvin
2008-10-26 12:26 ` Hugh Dickins
2008-10-26 13:25   ` Andreas Gruenbacher
2008-10-27 20:14     ` Rob MacKinnon
2008-10-27 20:25       ` Stephen Smalley
2008-10-27 20:53         ` Andreas Gruenbacher
2008-10-27 21:12           ` Rob MacKinnon
2008-10-28  5:51             ` Casey Schaufler
2008-10-29 15:15               ` [PATCH] smack inode_listsecurity fix Casey Schaufler
2008-10-29 15:56               ` tmpfs support of xattrs? Rob MacKinnon
2008-10-29 16:12                 ` Casey Schaufler
2008-10-27 21:00         ` Rob MacKinnon
2008-10-27 21:54           ` Casey Schaufler
  -- strict thread matches above, loose matches on Subject: below --
2008-10-25  8:27 Rob MacKinnon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).