LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] [V3][powerpc] GPIO: Adding new Xilinx driver
@ 2008-10-27 19:00 John Linn
  0 siblings, 0 replies; only message in thread
From: John Linn @ 2008-10-27 19:00 UTC (permalink / raw)
  To: grant.likely, jwboyer, avorontsov, linuxppc-dev, linux-kernel
  Cc: John Linn, Kiran Sutariya, Grant Likely

This driver supports the Xilinx XPS GPIO IP core which has the typical
GPIO features.

Signed-off-by: Kiran Sutariya <kirans@xilinx.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: John Linn <john.linn@xilinx.com>
---
V2 - Updated based on Anton's comments
V3 - Cleaned up Kconfig badness in patch generation and added Grant's signoff

 drivers/gpio/Kconfig       |    8 ++
 drivers/gpio/Makefile      |    1 +
 drivers/gpio/xilinx_gpio.c |  235 ++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 244 insertions(+), 0 deletions(-)
 create mode 100644 drivers/gpio/xilinx_gpio.c

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 7f2ee27..48f49d9 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -65,6 +65,14 @@ config GPIO_SYSFS
 
 # put expanders in the right section, in alphabetical order
 
+comment "Memory mapped GPIO expanders:"
+
+config GPIO_XILINX
+	bool "Xilinx GPIO support"
+	depends on PPC_OF
+	help
+	  Say yes here to support the Xilinx FPGA GPIO device
+
 comment "I2C GPIO expanders:"
 
 config GPIO_MAX732X
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 6aafdeb..49ac64e 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -10,4 +10,5 @@ obj-$(CONFIG_GPIO_MCP23S08)	+= mcp23s08.o
 obj-$(CONFIG_GPIO_PCA953X)	+= pca953x.o
 obj-$(CONFIG_GPIO_PCF857X)	+= pcf857x.o
 obj-$(CONFIG_GPIO_TWL4030)	+= twl4030-gpio.o
+obj-$(CONFIG_GPIO_XILINX)	+= xilinx_gpio.o
 obj-$(CONFIG_GPIO_BT8XX)	+= bt8xxgpio.o
diff --git a/drivers/gpio/xilinx_gpio.c b/drivers/gpio/xilinx_gpio.c
new file mode 100644
index 0000000..3c1177a
--- /dev/null
+++ b/drivers/gpio/xilinx_gpio.c
@@ -0,0 +1,235 @@
+/*
+ * Xilinx gpio driver
+ *
+ * Copyright 2008 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+/* Register Offset Definitions */
+#define XGPIO_DATA_OFFSET   (0x0)	/* Data register  */
+#define XGPIO_TRI_OFFSET    (0x4)	/* I/O direction register  */
+
+struct xgpio_instance {
+	struct of_mm_gpio_chip mmchip;
+	u32 gpio_state;		/* GPIO state shadow register */
+	u32 gpio_dir;		/* GPIO direction shadow register */
+	spinlock_t gpio_lock;	/* Lock used for synchronization */
+};
+
+/**
+ * xgpio_get - Read the specified signal of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * This function reads the specified signal of the GPIO device. It returns 0 if
+ * the signal clear, 1 if signal is set or negative value on error.
+ */
+static int xgpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+
+	return (in_be32(mm_gc->regs + XGPIO_DATA_OFFSET) >> gpio) & 1;
+}
+
+/**
+ * xgpio_set - Write the specified signal of the GPIO device.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * This function writes the specified value in to the specified signal of the
+ * GPIO device.
+ */
+static void xgpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct xgpio_instance *chip =
+	    container_of(mm_gc, struct xgpio_instance, mmchip);
+
+	spin_lock_irqsave(&chip->gpio_lock, flags);
+
+	/* Write to GPIO signal and set its direction to output */
+	if (val)
+		chip->gpio_state |= 1 << gpio;
+	else
+		chip->gpio_state &= ~(1 << gpio);
+	out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+
+	spin_unlock_irqrestore(&chip->gpio_lock, flags);
+}
+
+/**
+ * xgpio_dir_in - Set the direction of the specified GPIO signal as input.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ *
+ * This function sets the direction of specified GPIO signal as input.
+ * It returns 0 if direction of GPIO signals is set as input otherwise it
+ * returns negative error value.
+ */
+static int xgpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
+{
+	unsigned long flags;
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct xgpio_instance *chip =
+	    container_of(mm_gc, struct xgpio_instance, mmchip);
+
+	spin_lock_irqsave(&chip->gpio_lock, flags);
+
+	/* Set the GPIO bit in shadow register and set direction as input */
+	chip->gpio_dir |= (1 << gpio);
+	out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+
+	spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+	return 0;
+}
+
+/**
+ * xgpio_dir_out - Set the direction of the specified GPIO signal as output.
+ * @gc:     Pointer to gpio_chip device structure.
+ * @gpio:   GPIO signal number.
+ * @val:    Value to be written to specified signal.
+ *
+ * This function sets the direction of specified GPIO signal as output. If all
+ * GPIO signals of GPIO chip is configured as input then it returns
+ * error otherwise it returns 0.
+ */
+static int xgpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
+{
+	unsigned long flags;
+	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
+	struct xgpio_instance *chip =
+	    container_of(mm_gc, struct xgpio_instance, mmchip);
+
+	spin_lock_irqsave(&chip->gpio_lock, flags);
+
+	/* Write state of GPIO signal */
+	if (val)
+		chip->gpio_state |= 1 << gpio;
+	else
+		chip->gpio_state &= ~(1 << gpio);
+	out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+
+	/* Clear the GPIO bit in shadow register and set direction as output */
+	chip->gpio_dir &= (~(1 << gpio));
+	out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+
+	spin_unlock_irqrestore(&chip->gpio_lock, flags);
+
+	return 0;
+}
+
+/**
+ * xgpio_save_regs - Set initial values of GPIO pins
+ * @mm_gc: pointer to memory mapped GPIO chip structure
+ */
+static void xgpio_save_regs(struct of_mm_gpio_chip *mm_gc)
+{
+	struct xgpio_instance *chip =
+	    container_of(mm_gc, struct xgpio_instance, mmchip);
+
+	out_be32(mm_gc->regs + XGPIO_DATA_OFFSET, chip->gpio_state);
+	out_be32(mm_gc->regs + XGPIO_TRI_OFFSET, chip->gpio_dir);
+}
+
+/**
+ * xgpio_of_probe - Probe method for the GPIO device.
+ * @np: pointer to device tree node
+ *
+ * This function probes the GPIO device in the device tree. It initializes the
+ * driver data structure. It returns 0, if the driver is bound to the GPIO
+ * device, or a negative value if there is an error.
+ */
+static int __devinit xgpio_of_probe(struct device_node *np)
+{
+	struct xgpio_instance *chip;
+	struct of_gpio_chip *ofchip;
+	int status = 0;
+	const u32 *tree_info;
+
+	chip = kzalloc(sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+	ofchip = &chip->mmchip.of_gc;
+
+	/* Update GPIO state shadow register with default value */
+	tree_info = of_get_property(np, "xlnx,dout-default", NULL);
+	if (tree_info)
+		chip->gpio_state = *tree_info;
+
+	/* Update GPIO direction shadow register with default value */
+	chip->gpio_dir = 0xFFFFFFFF; /* By default, all pins are inputs */
+	tree_info = of_get_property(np, "xlnx,tri-default", NULL);
+	if (tree_info)
+		chip->gpio_dir = *tree_info;
+
+	/* Check device node and parent device node for device width */
+	ofchip->gc.ngpio = 32; /* By default assume full GPIO controller */
+	tree_info = of_get_property(np, "xlnx,gpio-width", NULL);
+	if (!tree_info)
+		tree_info = of_get_property(np->parent,
+					    "xlnx,gpio-width", NULL);
+	if (tree_info)
+		ofchip->gc.ngpio = *tree_info;
+
+	spin_lock_init(&chip->gpio_lock);
+
+	ofchip->gpio_cells = 2;
+	ofchip->gc.direction_input = xgpio_dir_in;
+	ofchip->gc.direction_output = xgpio_dir_out;
+	ofchip->gc.get = xgpio_get;
+	ofchip->gc.set = xgpio_set;
+
+	chip->mmchip.save_regs = xgpio_save_regs;
+
+	/* Call the OF gpio helper to setup and register the GPIO device */
+	status = of_mm_gpiochip_add(np, &chip->mmchip);
+	if (status) {
+		kfree(chip);
+		pr_err("%s: error in probe function with status %d\n",
+		       np->full_name, status);
+		return status;
+	}
+	pr_info("XGpio: %s: registered\n", np->full_name);
+	return 0;
+}
+
+static struct of_device_id xgpio_of_match[] __devinitdata = {
+	{ .compatible = "xlnx,xps-gpio-1.00.a", },
+	{ /* end of list */ },
+};
+
+static int __init xgpio_init(void)
+{
+	struct device_node *np;
+
+	for_each_matching_node(np, xgpio_of_match)
+		xgpio_of_probe(np);
+
+	return 0;
+}
+
+/* Make sure we get initialized before anyone else tries to use us */
+subsys_initcall(xgpio_init);
+/* No exit call at the moment as we cannot unregister of GPIO chips */
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Xilinx GPIO driver");
+MODULE_LICENSE("GPL");
-- 
1.5.2.1



This email and any attachments are intended for the sole use of the named recipient(s) and contain(s) confidential information that may be proprietary, privileged or copyrighted under applicable law. If you are not the intended recipient, do not read, copy, or forward this email message or any attachments. Delete this email message and any attachments immediately.



^ permalink raw reply	[flat|nested] only message in thread

only message in thread, other threads:[~2008-10-27 19:01 UTC | newest]

Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-10-27 19:00 [PATCH] [V3][powerpc] GPIO: Adding new Xilinx driver John Linn

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).