LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [git patches] libata updates
@ 2008-10-28  4:45 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2008-10-28  4:45 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


All bug fixes except for the one-line Promise PCI ID addition to ahci,
the zap-magic-numbers prep patch from David Milburn, and Alan's email
addr patch.

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ahci.c              |   41 +++++++++++++++++++++++++----------
 drivers/ata/ata_generic.c       |    2 +-
 drivers/ata/ata_piix.c          |    2 +-
 drivers/ata/libata-core.c       |   35 +++++++++++++++++-------------
 drivers/ata/libata-eh.c         |   14 +++++++++++-
 drivers/ata/pata_acpi.c         |    2 +-
 drivers/ata/pata_ali.c          |    1 -
 drivers/ata/pata_amd.c          |    1 -
 drivers/ata/pata_artop.c        |    2 +-
 drivers/ata/pata_atiixp.c       |    1 -
 drivers/ata/pata_cmd640.c       |    1 -
 drivers/ata/pata_cmd64x.c       |    2 +-
 drivers/ata/pata_cs5530.c       |    1 -
 drivers/ata/pata_cs5535.c       |    2 +-
 drivers/ata/pata_cypress.c      |    2 +-
 drivers/ata/pata_efar.c         |    2 +-
 drivers/ata/pata_isapnp.c       |    2 +-
 drivers/ata/pata_it821x.c       |    7 ++---
 drivers/ata/pata_jmicron.c      |    2 +-
 drivers/ata/pata_legacy.c       |    2 +-
 drivers/ata/pata_marvell.c      |    2 +-
 drivers/ata/pata_mpiix.c        |    2 +-
 drivers/ata/pata_netcell.c      |    2 +-
 drivers/ata/pata_ninja32.c      |   44 ++++++++++++++++++++++++++++++--------
 drivers/ata/pata_ns87410.c      |    1 -
 drivers/ata/pata_ns87415.c      |    2 +-
 drivers/ata/pata_oldpiix.c      |    2 +-
 drivers/ata/pata_opti.c         |    1 -
 drivers/ata/pata_optidma.c      |    1 -
 drivers/ata/pata_pcmcia.c       |    2 +-
 drivers/ata/pata_pdc202xx_old.c |    2 +-
 drivers/ata/pata_platform.c     |    2 +-
 drivers/ata/pata_qdi.c          |    2 +-
 drivers/ata/pata_radisys.c      |    2 +-
 drivers/ata/pata_sc1200.c       |    2 +-
 drivers/ata/pata_scc.c          |    2 +-
 drivers/ata/pata_serverworks.c  |    1 -
 drivers/ata/pata_sil680.c       |    1 -
 drivers/ata/pata_sis.c          |    2 +-
 drivers/ata/pata_sl82c105.c     |    1 -
 drivers/ata/pata_triflex.c      |    2 +-
 drivers/ata/pata_via.c          |    1 -
 drivers/ata/pata_winbond.c      |    2 +-
 drivers/ata/sata_sil24.c        |    5 ++++
 44 files changed, 130 insertions(+), 80 deletions(-)

Alan Cox (2):
      ata: Switch all my stuff to a common address
      pata_ninja32: suspend/resume support

David Milburn (2):
      libata: ahci enclosure management led sync
      libata: ahci enclosure management bit mask

Mark Nelson (1):
      ahci: Add support for Promise PDC42819

Ondrej Zary (1):
      libata: Fix LBA48 on pata_it821x RAID volumes.

Randy Dunlap (1):
      libata: add missing kernel-doc

Tejun Heo (3):
      libata: fix device iteration bugs
      sata_sil24: configure max read request size to 4k
      libata: clear saved xfer_mode and ncq_enabled on device detach

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index aeadd00..a67b8e7 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -49,6 +49,17 @@
 #define DRV_NAME	"ahci"
 #define DRV_VERSION	"3.0"
 
+/* Enclosure Management Control */
+#define EM_CTRL_MSG_TYPE              0x000f0000
+
+/* Enclosure Management LED Message Type */
+#define EM_MSG_LED_HBA_PORT           0x0000000f
+#define EM_MSG_LED_PMP_SLOT           0x0000ff00
+#define EM_MSG_LED_VALUE              0xffff0000
+#define EM_MSG_LED_VALUE_ACTIVITY     0x00070000
+#define EM_MSG_LED_VALUE_OFF          0xfff80000
+#define EM_MSG_LED_VALUE_ON           0x00010000
+
 static int ahci_skip_host_reset;
 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
@@ -588,6 +599,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
 	{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },	/* 6121 */
 
+	/* Promise */
+	{ PCI_VDEVICE(PROMISE, 0x3f20), board_ahci },	/* PDC42819 */
+
 	/* Generic, PCI class code for AHCI */
 	{ PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci },
@@ -1220,18 +1234,20 @@ static void ahci_sw_activity_blink(unsigned long arg)
 	struct ahci_em_priv *emp = &pp->em_priv[link->pmp];
 	unsigned long led_message = emp->led_state;
 	u32 activity_led_state;
+	unsigned long flags;
 
-	led_message &= 0xffff0000;
+	led_message &= EM_MSG_LED_VALUE;
 	led_message |= ap->port_no | (link->pmp << 8);
 
 	/* check to see if we've had activity.  If so,
 	 * toggle state of LED and reset timer.  If not,
 	 * turn LED to desired idle state.
 	 */
+	spin_lock_irqsave(ap->lock, flags);
 	if (emp->saved_activity != emp->activity) {
 		emp->saved_activity = emp->activity;
 		/* get the current LED state */
-		activity_led_state = led_message & 0x00010000;
+		activity_led_state = led_message & EM_MSG_LED_VALUE_ON;
 
 		if (activity_led_state)
 			activity_led_state = 0;
@@ -1239,17 +1255,18 @@ static void ahci_sw_activity_blink(unsigned long arg)
 			activity_led_state = 1;
 
 		/* clear old state */
-		led_message &= 0xfff8ffff;
+		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
 
 		/* toggle state */
 		led_message |= (activity_led_state << 16);
 		mod_timer(&emp->timer, jiffies + msecs_to_jiffies(100));
 	} else {
 		/* switch to idle */
-		led_message &= 0xfff8ffff;
+		led_message &= ~EM_MSG_LED_VALUE_ACTIVITY;
 		if (emp->blink_policy == BLINK_OFF)
 			led_message |= (1 << 16);
 	}
+	spin_unlock_irqrestore(ap->lock, flags);
 	ahci_transmit_led_message(ap, led_message, 4);
 }
 
@@ -1294,7 +1311,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	struct ahci_em_priv *emp;
 
 	/* get the slot number from the message */
-	pmp = (state & 0x0000ff00) >> 8;
+	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
 	if (pmp < MAX_SLOTS)
 		emp = &pp->em_priv[pmp];
 	else
@@ -1319,7 +1336,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	message[0] |= (4 << 8);
 
 	/* ignore 0:4 of byte zero, fill in port info yourself */
-	message[1] = ((state & 0xfffffff0) | ap->port_no);
+	message[1] = ((state & ~EM_MSG_LED_HBA_PORT) | ap->port_no);
 
 	/* write message to EM_LOC */
 	writel(message[0], mmio + hpriv->em_loc);
@@ -1362,7 +1379,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 	state = simple_strtoul(buf, NULL, 0);
 
 	/* get the slot number from the message */
-	pmp = (state & 0x0000ff00) >> 8;
+	pmp = (state & EM_MSG_LED_PMP_SLOT) >> 8;
 	if (pmp < MAX_SLOTS)
 		emp = &pp->em_priv[pmp];
 	else
@@ -1373,7 +1390,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 	 * activity led through em_message
 	 */
 	if (emp->blink_policy)
-		state &= 0xfff8ffff;
+		state &= ~EM_MSG_LED_VALUE_ACTIVITY;
 
 	return ahci_transmit_led_message(ap, state, size);
 }
@@ -1392,16 +1409,16 @@ static ssize_t ahci_activity_store(struct ata_device *dev, enum sw_activity val)
 		link->flags &= ~(ATA_LFLAG_SW_ACTIVITY);
 
 		/* set the LED to OFF */
-		port_led_state &= 0xfff80000;
+		port_led_state &= EM_MSG_LED_VALUE_OFF;
 		port_led_state |= (ap->port_no | (link->pmp << 8));
 		ahci_transmit_led_message(ap, port_led_state, 4);
 	} else {
 		link->flags |= ATA_LFLAG_SW_ACTIVITY;
 		if (val == BLINK_OFF) {
 			/* set LED to ON for idle */
-			port_led_state &= 0xfff80000;
+			port_led_state &= EM_MSG_LED_VALUE_OFF;
 			port_led_state |= (ap->port_no | (link->pmp << 8));
-			port_led_state |= 0x00010000; /* check this */
+			port_led_state |= EM_MSG_LED_VALUE_ON; /* check this */
 			ahci_transmit_led_message(ap, port_led_state, 4);
 		}
 	}
@@ -2612,7 +2629,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		u32 em_loc = readl(mmio + HOST_EM_LOC);
 		u32 em_ctl = readl(mmio + HOST_EM_CTL);
 
-		messages = (em_ctl & 0x000f0000) >> 16;
+		messages = (em_ctl & EM_CTRL_MSG_TYPE) >> 16;
 
 		/* we only support LED message type right now */
 		if ((messages & 0x01) && (ahci_em_messages == 1)) {
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 75a406f..5c33767 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -1,6 +1,6 @@
 /*
  *  ata_generic.c - Generic PATA/SATA controller driver.
- *  Copyright 2005 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *  Copyright 2005 Red Hat Inc, all rights reserved.
  *
  *  Elements from ide/pci/generic.c
  *	    Copyright (C) 2001-2002	Andre Hedrick <andre@linux-ide.org>
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e9e32ed..52dc2d8 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -14,7 +14,7 @@
  *
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *  Copyright (C) 2003 Red Hat Inc
  *
  *
  *  This program is free software; you can redistribute it and/or modify
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 8cb0b36..2ff633c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4156,29 +4156,33 @@ static int cable_is_40wire(struct ata_port *ap)
 	struct ata_link *link;
 	struct ata_device *dev;
 
-	/* If the controller thinks we are 40 wire, we are */
+	/* If the controller thinks we are 40 wire, we are. */
 	if (ap->cbl == ATA_CBL_PATA40)
 		return 1;
-	/* If the controller thinks we are 80 wire, we are */
+
+	/* If the controller thinks we are 80 wire, we are. */
 	if (ap->cbl == ATA_CBL_PATA80 || ap->cbl == ATA_CBL_SATA)
 		return 0;
-	/* If the system is known to be 40 wire short cable (eg laptop),
-	   then we allow 80 wire modes even if the drive isn't sure */
+
+	/* If the system is known to be 40 wire short cable (eg
+	 * laptop), then we allow 80 wire modes even if the drive
+	 * isn't sure.
+	 */
 	if (ap->cbl == ATA_CBL_PATA40_SHORT)
 		return 0;
-	/* If the controller doesn't know we scan
-
-	   - Note: We look for all 40 wire detects at this point.
-	     Any 80 wire detect is taken to be 80 wire cable
-	     because
-	     - In many setups only the one drive (slave if present)
-               will give a valid detect
-             - If you have a non detect capable drive you don't
-               want it to colour the choice
-        */
+
+	/* If the controller doesn't know, we scan.
+	 *
+	 * Note: We look for all 40 wire detects at this point.  Any
+	 *       80 wire detect is taken to be 80 wire cable because
+	 * - in many setups only the one drive (slave if present) will
+	 *   give a valid detect
+	 * - if you have a non detect capable drive you don't want it
+	 *   to colour the choice
+	 */
 	ata_port_for_each_link(link, ap) {
 		ata_link_for_each_dev(dev, link) {
-			if (!ata_is_40wire(dev))
+			if (ata_dev_enabled(dev) && !ata_is_40wire(dev))
 				return 0;
 		}
 	}
@@ -4553,6 +4557,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 /**
  *	ata_qc_new_init - Request an available ATA command, and initialize it
  *	@dev: Device from whom we request an available command structure
+ *	@tag: command tag
  *
  *	LOCKING:
  *	None.
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 5d687d7..8077bdf 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -603,6 +603,9 @@ void ata_scsi_error(struct Scsi_Host *host)
 			ata_link_for_each_dev(dev, link) {
 				int devno = dev->devno;
 
+				if (!ata_dev_enabled(dev))
+					continue;
+
 				ehc->saved_xfer_mode[devno] = dev->xfer_mode;
 				if (ata_ncq_enabled(dev))
 					ehc->saved_ncq_enabled |= 1 << devno;
@@ -1161,6 +1164,7 @@ void ata_eh_detach_dev(struct ata_device *dev)
 {
 	struct ata_link *link = dev->link;
 	struct ata_port *ap = link->ap;
+	struct ata_eh_context *ehc = &link->eh_context;
 	unsigned long flags;
 
 	ata_dev_disable(dev);
@@ -1174,9 +1178,11 @@ void ata_eh_detach_dev(struct ata_device *dev)
 		ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
 	}
 
-	/* clear per-dev EH actions */
+	/* clear per-dev EH info */
 	ata_eh_clear_action(link, dev, &link->eh_info, ATA_EH_PERDEV_MASK);
 	ata_eh_clear_action(link, dev, &link->eh_context.i, ATA_EH_PERDEV_MASK);
+	ehc->saved_xfer_mode[dev->devno] = 0;
+	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
 	spin_unlock_irqrestore(ap->lock, flags);
 }
@@ -2787,6 +2793,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
 	/* if data transfer is verified, clear DUBIOUS_XFER on ering top */
 	ata_link_for_each_dev(dev, link) {
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (!(dev->flags & ATA_DFLAG_DUBIOUS_XFER)) {
 			struct ata_ering_entry *ent;
 
@@ -2808,6 +2817,9 @@ int ata_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		u8 saved_xfer_mode = ehc->saved_xfer_mode[dev->devno];
 		u8 saved_ncq = !!(ehc->saved_ncq_enabled & (1 << dev->devno));
 
+		if (!ata_dev_enabled(dev))
+			continue;
+
 		if (dev->xfer_mode != saved_xfer_mode ||
 		    ata_ncq_enabled(dev) != saved_ncq)
 			dev->flags |= ATA_DFLAG_DUBIOUS_XFER;
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index eb919c1..e2e332d 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -1,7 +1,7 @@
 /*
  *	ACPI PATA driver
  *
- *	(c) 2007 Red Hat  <alan@redhat.com>
+ *	(c) 2007 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 5ca70fa..73c466e 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -1,7 +1,6 @@
 /*
  * pata_ali.c 	- ALI 15x3 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based in part upon
  * linux/drivers/ide/pci/alim15x3.c		Version 0.17	2003/01/02
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 57dd00f..0ec9c7d 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -1,7 +1,6 @@
 /*
  * pata_amd.c 	- AMD PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *  Based on pata-sil680. Errata information is taken from data sheets
  *  and the amd74xx.c driver by Vojtech Pavlik. Nvidia SATA devices are
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 0f513bc..6b3092c 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -1,7 +1,7 @@
 /*
  *    pata_artop.c - ARTOP ATA controller driver
  *
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat
  *	(C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based in part on drivers/ide/pci/aec62xx.c
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index e8a0d99..0e2cde8 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -1,7 +1,6 @@
 /*
  * pata_atiixp.c 	- ATI PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based on
  *
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 2de30b9..34a3942 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -1,7 +1,6 @@
 /*
  * pata_cmd640.c 	- CMD640 PCI PATA for new ATA layer
  *			  (C) 2007 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based upon
  *  linux/drivers/ide/pci/cmd640.c		Version 1.02  Sep 01, 1996
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index ddd09b7..3167d8f 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -1,7 +1,7 @@
 /*
  * pata_cmd64x.c 	- CMD64x PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * Based upon
  * linux/drivers/ide/pci/cmd64x.c		Version 1.30	Sept 10, 2002
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 0c4b271..bba4533 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -1,7 +1,6 @@
 /*
  * pata-cs5530.c 	- CS5530 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based upon cs5530.c by Mark Lord.
  *
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index f1b6556..1b2d4a0 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -1,7 +1,7 @@
 /*
  * pata-cs5535.c 	- CS5535 PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * based upon cs5535.c from AMD <Jens.Altmann@amd.com> as cleaned up and
  * made readable and Linux style by Wolfgang Zuleger <wolfgang.zuleger@gmx.de
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 2ff6260..d546425 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -1,7 +1,7 @@
 /*
  * pata_cypress.c 	- Cypress PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox
  *
  * Based heavily on
  * linux/drivers/ide/pci/cy82c693.c		Version 0.40	Sep. 10, 2002
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 9fba829..ac6392e 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -1,7 +1,7 @@
 /*
  *    pata_efar.c - EFAR PIIX clone controller driver
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 6a111ba..15cdb91 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -1,7 +1,7 @@
 
 /*
  *   pata-isapnp.c - ISA PnP PATA controller driver.
- *   Copyright 2005/2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005/2006 Red Hat Inc, all rights reserved.
  *
  *   Based in part on ide-pnp.c by Andrey Panin <pazke@donpac.ru>
  */
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 0221c9a..860ede5 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -1,7 +1,7 @@
 /*
  * pata_it821x.c 	- IT821x PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *			  (C) 2007 Bartlomiej Zolnierkiewicz
  *
  * based upon
@@ -10,7 +10,7 @@
  *
  * linux/drivers/ide/pci/it821x.c		Version 0.09	December 2004
  *
- * Copyright (C) 2004		Red Hat <alan@redhat.com>
+ * Copyright (C) 2004		Red Hat
  *
  *  May be copied or modified under the terms of the GNU General Public License
  *  Based in part on the ITE vendor provided SCSI driver.
@@ -557,9 +557,8 @@ static unsigned int it821x_read_id(struct ata_device *adev,
 	if (strstr(model_num, "Integrated Technology Express")) {
 		/* Set feature bits the firmware neglects */
 		id[49] |= 0x0300;	/* LBA, DMA */
-		id[82] |= 0x0400;	/* LBA48 */
 		id[83] &= 0x7FFF;
-		id[83] |= 0x4000;	/* Word 83 is valid */
+		id[83] |= 0x4400;	/* Word 83 is valid and LBA48 */
 		id[86] |= 0x0400;	/* LBA48 on */
 		id[ATA_ID_MAJOR_VER] |= 0x1F;
 	}
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 73b7596..38cf1ab 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -4,7 +4,7 @@
  *			driven by AHCI in the usual configuration although
  *			this driver can handle other setups if we need it.
  *
- *	(c) 2006 Red Hat  <alan@redhat.com>
+ *	(c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index bc037ff..930c220 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -1,6 +1,6 @@
 /*
  *   pata-legacy.c - Legacy port PATA/SATA controller driver.
- *   Copyright 2005/2006 Red Hat <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005/2006 Red Hat, all rights reserved.
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 0d87eec..76e399b 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -5,7 +5,7 @@
  *	isn't making full use of the device functionality but it is
  *	easy to get working.
  *
- *	(c) 2006 Red Hat  <alan@redhat.com>
+ *	(c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 7d7e3fd..7c8faa4 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -1,7 +1,7 @@
 /*
  * pata_mpiix.c 	- Intel MPIIX PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * The MPIIX is different enough to the PIIX4 and friends that we give it
  * a separate driver. The old ide/pci code handles this by just not tuning
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index d9719c8..9dc05e1 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -1,7 +1,7 @@
 /*
  *    pata_netcell.c - Netcell PATA driver
  *
- *	(c) 2006 Red Hat  <alan@redhat.com>
+ *	(c) 2006 Red Hat
  */
 
 #include <linux/kernel.h>
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 565e67c..4e466ea 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -1,7 +1,6 @@
 /*
  * pata_ninja32.c 	- Ninja32 PATA for new ATA layer
  *			  (C) 2007 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Note: The controller like many controllers has shared timings for
  * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back
@@ -45,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_ninja32"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.1.1"
 
 
 /**
@@ -89,6 +88,17 @@ static struct ata_port_operations ninja32_port_ops = {
 	.set_piomode	= ninja32_set_piomode,
 };
 
+static void ninja32_program(void __iomem *base)
+{
+	iowrite8(0x05, base + 0x01);	/* Enable interrupt lines */
+	iowrite8(0xBE, base + 0x02);	/* Burst, ?? setup */
+	iowrite8(0x01, base + 0x03);	/* Unknown */
+	iowrite8(0x20, base + 0x04);	/* WAIT0 */
+	iowrite8(0x8f, base + 0x05);	/* Unknown */
+	iowrite8(0xa4, base + 0x1c);	/* Unknown */
+	iowrite8(0x83, base + 0x1d);	/* BMDMA control: WAIT0 */
+}
+
 static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct ata_host *host;
@@ -134,18 +144,28 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	ap->ioaddr.bmdma_addr = base;
 	ata_sff_std_ports(&ap->ioaddr);
 
-	iowrite8(0x05, base + 0x01);	/* Enable interrupt lines */
-	iowrite8(0xBE, base + 0x02);	/* Burst, ?? setup */
-	iowrite8(0x01, base + 0x03);	/* Unknown */
-	iowrite8(0x20, base + 0x04);	/* WAIT0 */
-	iowrite8(0x8f, base + 0x05);	/* Unknown */
-	iowrite8(0xa4, base + 0x1c);	/* Unknown */
-	iowrite8(0x83, base + 0x1d);	/* BMDMA control: WAIT0 */
+	ninja32_program(base);
 	/* FIXME: Should we disable them at remove ? */
 	return ata_host_activate(host, dev->irq, ata_sff_interrupt,
 				 IRQF_SHARED, &ninja32_sht);
 }
 
+#ifdef CONFIG_PM
+
+static int ninja32_reinit_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+	ninja32_program(host->iomap[0]);
+	ata_host_resume(host);
+	return 0;			
+}
+#endif
+
 static const struct pci_device_id ninja32[] = {
 	{ 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
 	{ 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
@@ -156,7 +176,11 @@ static struct pci_driver ninja32_pci_driver = {
 	.name 		= DRV_NAME,
 	.id_table	= ninja32,
 	.probe 		= ninja32_init_one,
-	.remove		= ata_pci_remove_one
+	.remove		= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend	= ata_pci_device_suspend,
+	.resume		= ninja32_reinit_one,
+#endif
 };
 
 static int __init ninja32_init(void)
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index be756b7..40d411c 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -1,7 +1,6 @@
 /*
  * pata_ns87410.c 	- National Semiconductor 87410 PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *  This program is free software; you can redistribute it and/or modify
  *  it under the terms of the GNU General Public License as published by
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index e0aa7ea..89bf5f8 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -1,7 +1,7 @@
 /*
  *    pata_ns87415.c - NS87415 (non PARISC) PATA
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat <alan@lxorguk.ukuu.org.uk>
  *
  *    This is a fairly generic MWDMA controller. It has some limitations
  *    as it requires timing reloads on PIO/DMA transitions but it is otherwise
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index df64f24..c0dbc46 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -1,7 +1,7 @@
 /*
  *    pata_oldpiix.c - Intel PATA/SATA controllers
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index fb2cf66..e4fa4d5 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -1,7 +1,6 @@
 /*
  * pata_opti.c 	- ATI PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based on
  *  linux/drivers/ide/pci/opti621.c		Version 0.7	Sept 10, 2002
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 4cd7444..93bb6e9 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -1,7 +1,6 @@
 /*
  * pata_optidma.c 	- Opti DMA PATA for new ATA layer
  *			  (C) 2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *	The Opti DMA controllers are related to the older PIO PCI controllers
  *	and indeed the VLB ones. The main differences are that the timing
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 02b596b..271cb64 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -1,6 +1,6 @@
 /*
  *   pata_pcmcia.c - PCMCIA PATA controller driver.
- *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
  *   PCMCIA ident update Copyright 2006 Marcin Juszkiewicz
  *						<openembedded@hrw.one.pl>
  *
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index d267306..799a6a0 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -1,7 +1,7 @@
 /*
  * pata_pdc202xx_old.c 	- Promise PDC202xx PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *			  (C) 2007 Bartlomiej Zolnierkiewicz
  *
  * Based in part on linux/drivers/ide/pci/pdc202xx_old.c
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 8f65ad6..77e4e3b 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -5,7 +5,7 @@
  *
  * Based on pata_pcmcia:
  *
- *   Copyright 2005-2006 Red Hat Inc <alan@redhat.com>, all rights reserved.
+ *   Copyright 2005-2006 Red Hat Inc, all rights reserved.
  *
  * This file is subject to the terms and conditions of the GNU General Public
  * License.  See the file "COPYING" in the main directory of this archive
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index 63b7a1c..3080f37 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -1,6 +1,6 @@
 /*
  *    pata_qdi.c - QDI VLB ATA controllers
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat
  *
  * This driver mostly exists as a proof of concept for non PCI devices under
  * libata. While the QDI6580 was 'neat' in 1993 it is no longer terribly
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 1c0d9fa..0b0aa45 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -1,7 +1,7 @@
 /*
  *    pata_radisys.c - Intel PATA/SATA controllers
  *
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat <alan@lxorguk.ukuu.org.uk>
  *
  *    Some parts based on ata_piix.c by Jeff Garzik and others.
  *
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 0278fd2..9a4bdca 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -1,5 +1,5 @@
 /*
- * New ATA layer SC1200 driver		Alan Cox <alan@redhat.com>
+ * New ATA layer SC1200 driver		Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * TODO: Mode selection filtering
  * TODO: Can't enable second channel until ATA core has serialize
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 16673d1..cf3707e 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -8,7 +8,7 @@
  *  Copyright 2003-2005 Jeff Garzik
  *  Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
  *  Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- *  Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
+ *  Copyright (C) 2003 Red Hat Inc
  *
  * and drivers/ata/ahci.c:
  *  Copyright 2004-2005 Red Hat, Inc.
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index ffd26d0..72e41c9 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -1,7 +1,6 @@
 /*
  * pata_serverworks.c 	- Serverworks PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index a598bb3..83580a5 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -1,7 +1,6 @@
 /*
  * pata_sil680.c 	- SIL680 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 26345d7..d342366 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -1,7 +1,7 @@
 /*
  *    pata_sis.c - SiS ATA driver
  *
- *	(C) 2005 Red Hat <alan@redhat.com>
+ *	(C) 2005 Red Hat
  *	(C) 2007 Bartlomiej Zolnierkiewicz
  *
  *    Based upon linux/drivers/ide/pci/sis5513.c
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 69877bd..1b0e7b6 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -1,7 +1,6 @@
 /*
  * pata_sl82c105.c 	- SL82C105 PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  * Based in part on linux/drivers/ide/pci/sl82c105.c
  * 		SL82C105/Winbond 553 IDE driver
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index b181261..ef95975 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -1,7 +1,7 @@
 /*
  * pata_triflex.c 	- Compaq PATA for new ATA layer
  *			  (C) 2005 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
+ *			  Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * based upon
  *
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 8fdb2ce..681169c 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -1,7 +1,6 @@
 /*
  * pata_via.c 	- VIA PATA for new ATA layer
  *			  (C) 2005-2006 Red Hat Inc
- *			  Alan Cox <alan@redhat.com>
  *
  *  Documentation
  *	Most chipset documentation available under NDA only
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index a7606b0..319e164 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -1,6 +1,6 @@
 /*
  *    pata_winbond.c - Winbond VLB ATA controllers
- *	(C) 2006 Red Hat <alan@redhat.com>
+ *	(C) 2006 Red Hat
  *
  *    Support for the Winbond 83759A when operating in advanced mode.
  *    Multichip mode is not currently supported.
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 4621807..ccee930 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1329,6 +1329,11 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
+	/* Set max read request size to 4096.  This slightly increases
+	 * write throughput for pci-e variants.
+	 */
+	pcie_set_readrq(pdev, 4096);
+
 	sil24_init_controller(host);
 
 	pci_set_master(pdev);

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2013-04-30 22:26 Jeff Garzik
@ 2013-04-30 23:18 ` Linus Torvalds
  0 siblings, 0 replies; 95+ messages in thread
From: Linus Torvalds @ 2013-04-30 23:18 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, IDE-ML, LKML

On Tue, Apr 30, 2013 at 3:26 PM, Jeff Garzik <jeff@garzik.org> wrote:
>
> Summary:

return -EMISSINGDIFFSTAT;

I've pulled, but *please* make sure to fix your broken script. I
really do want to see the diffstat, partly because I want to know what
to expect even before pulling, partly just to verify that what I
pulled actually matches what you expected me to pull (iow, hopefully
you actually read your own diffstat and anything surprising would have
jumped out at you).

               Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2013-04-30 22:26 Jeff Garzik
  2013-04-30 23:18 ` Linus Torvalds
  0 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2013-04-30 22:26 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Summary:

1) More ACPI fixes, cleanups

2) Minor cleanups for sata_highbank, pata_at32, pata_octeon_cf,
   sata_rcar

3) pata_legacy: small bug found in opti chipset code (untested fix,
   due to ancient h/w)

4) sata_fsl: RX water mark config knob, some h/w needs it

5) pata_imx: cleanups, DeviceTree support

6) SCSI<->ATA translator: properly export translator version,
   not device firmware version


Please pull 2cc1144a31f76d4a9fb48bec5d6ba1359f980813 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream-linus


to receive the following updates:

Aaron Lu (2):
      libata-acpi: remove redundent code for power resource handling
      [libata] acpi: make ata_ap_acpi_handle not block

Alexandru Gheorghiu (1):
      pata_octeon_cf: Use resource_size function

Baruch Even (1):
      [libata] SCSI: really use SATL version in VPD

Dan Carpenter (1):
      pata_legacy: bogus clock in opti82c46x_set_piomode()

Jingoo Han (2):
      pata_at32: use module_platform_driver_probe()
      sata_highbank: make ahci_highbank_pm_ops static

Lv Zheng (1):
      ACPI/libata: Restore libata.noacpi support

Qiang Liu (1):
      fsl/sata: create a sysfs entry for rx water mark

Robert Richter (1):
      sata_highbank: Rename proc_name to the module name

Sachin Kamat (1):
      sata_rcar: Convert to devm_ioremap_resource()

Sascha Hauer (4):
      pata_imx: Use devm_clk_get
      pata_imx: cleanup error path
      pata_imx: use void __iomem * for regs
      pata_imx: add devicetree support


^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-26  2:10             ` Jeff Garzik
@ 2012-07-26 17:14               ` Linus Torvalds
  0 siblings, 0 replies; 95+ messages in thread
From: Linus Torvalds @ 2012-07-26 17:14 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On Wed, Jul 25, 2012 at 7:10 PM, Jeff Garzik <jgarzik@pobox.com> wrote:
>
> Thanks, so noted.  I guess if the merge gets more complex than something
> easily described in an email, that implies that maintainers should do more
> cross-coordination and maybe a merge tree.

It's fairly rare. It happens mostly with the arch trees for some
reason - the ARM tree used to be an unholy mess.

And then we have the small "oops, we didn't even notice" things when
some driver (or FS) interface changes, and we have a new driver/fs or
just extended an old one, and there's a subtle conflict. And people
miss those, and quite frankly, it's not a huge deal. We can fix it up
later. It's the "oh, I knew about this" cases where it's fixed up as a
separate commit I dislike.

And quite frankly, I really do a lot of merges, and over the history
of git we have not had all that many really complicated ones. I
commonly send people email saying "ok, this clashed, you need to
double-check my merge", but it's not common that they are really
problems.

So to a first approximation, I'd actually prefer that submaintainers
not care *at*all* about whether something clashes upstream or not. If
there are consistent and problematic clashes, that implies some deeper
problem, and the solution to that is not "let's pre-merge", but rather
more along the lines of "we're doing something wrong, maybe our
interfaces are crap, or our modularity is wrong, let's think about
it".

And for subsystems where we have had problems, it's actually really
nice if the maintainer sends me the unmerged "this is the work I've
done" tree, and then perhaps has a separate "xyzzy-merged" branch that
has a pre-merged version. For cases like that, I will do the merge
myself, but I'll actually double-check my merge against the maintainer
merge. And it's happened more than once that my merge has differed,
and _my_ merge is the correct one. The maintainer may know his code
better, but I know my merging. I do a ton of them.

For example, this week I've done 66 merges, and 15 of them had
conflicts. Of the 15, only two were interesting iirc, but even those
weren't really "problematic", they were just enough to trigger me to
send out emails to the maintainers about them. And I don't think your
libata merge would really have merited even that, apart from the small
semantic thing (which would also have been trivial with a oneliner
"heads up, check out the semantic change in xyz.c:abcdef()".

> What's the best way for libata to move forward, now that this hideous merge
> has been pushed out to the Well Known libata branches?  The
> pre-jgarzik-merge commit you would have pulled is
> dc7f71f486f4f5fa96f6dcf86833da020cde8a11 had my pull request been proper.

I'll take your merge, it's not like it's a huge problem. What I care
most about is the "flow", and I am making a stink just so that this
doesn't become a common issue. We have tons of ugly history, and I'm
not black-and-white - problems happen. Big deal. I just want to make
sure that they don't become systemic.

                  Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-26  5:17       ` Aaron Lu
@ 2012-07-26 14:58         ` Alan Stern
  0 siblings, 0 replies; 95+ messages in thread
From: Alan Stern @ 2012-07-26 14:58 UTC (permalink / raw)
  To: Aaron Lu
  Cc: James Bottomley, Jeff Garzik, linux-scsi, Lin Ming, linux-ide, LKML

On Thu, 26 Jul 2012, Aaron Lu wrote:

> On 07/26/2012 01:05 PM, James Bottomley wrote:
> > On Thu, 2012-07-26 at 12:47 +0800, Aaron Lu wrote:
> >> On 07/26/2012 05:38 AM, Jeff Garzik wrote:
> >>> On 07/25/2012 04:35 PM, Jeff Garzik wrote:
> >>>> * Updating libata to directly bind with ACPI / runtime power mgmt.
> >>>> This is a pre-req for SATA ZPODD (CD-ROM power management).
> >>>>
> >>>> Touches ACPI (exports++) and SCSI in minor ways. Has been in linux-next
> >>>> for weeks.
> >>>>
> >>>> The rest of [ZPODD] will probably come via SCSI tree, as it involves
> >>>> a lot of updates to the 'sr' driver etc.
> >>>
> >>> BTW Lin and Aaron, note that this did not include these changes:
> >>>
> >>> sr: check support for device busy class events
> >>> sr: support zero power ODD
> >>> sr: make sure ODD is in resumed state in block ioctl
> >>>
> >>> as in the end I wanted to put the brakes on SCSI-touching patches. These
> >>> should be able to go into James' scsi-misc tree with the other SCSI-area
> >>> ZPODD changes.
> >>>
> >>> For those three 'sr' changes listed above, you may add
> >>>
> >>> Acked-by: Jeff Garzik<jgarzik@redhat.com>
> >>>
> >>> when moving them over.
> >>
> >> Thanks Jeff.
> >>
> >> Hi James,
> >> I'll prepare these dropped patches plus some other fixes for ZPODD which
> >> I've sent v2 recently and merge them into v3 for you to review.
> >
> > They weren't exactly dropped ... I've been waiting for you to address
> > Alan Stern's comments, since he's our resident expert on suspend/resume.
> 
> Oh, I forgot to mention, that I agree with Alan's comments and have
> addressed them in my v2 patches here:
> http://marc.info/?l=linux-scsi&m=134312317325650&w=2
> 
> The 2 patches Alan has comments are:
> http://marc.info/?l=linux-scsi&m=134312311025619&w=2
> http://marc.info/?l=linux-scsi&m=134312308225610&w=2
> 
> Hi Alan,
> Are the v2 patches look OK to you?

Yes, they are better now.

Acked-by: Alan Stern <stern@rowland.harvard.edu>


^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 23:30           ` Linus Torvalds
  2012-07-26  2:10             ` Jeff Garzik
@ 2012-07-26  7:44             ` Ingo Molnar
  1 sibling, 0 replies; 95+ messages in thread
From: Ingo Molnar @ 2012-07-26  7:44 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Jeff Garzik, Andrew Morton, linux-ide, linux-scsi, LKML


* Linus Torvalds <torvalds@linux-foundation.org> wrote:

> I couldn't find an example of that in a quick look, it's 
> fairly uncommon to have non-conflicting merges that had 
> semantic - but not contextual - conflicts. [...]

This:

  git log --grep='Semantic merge\|Semantic conflict'

gives over a dozen examples of such semantic merges I've done in 
the past 4 years. I fully agree that they are best done in the 
merge commit - in hindsight perhaps with a tad more explanation 
than I did.

Thanks,

	Ingo

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-26  5:05     ` James Bottomley
@ 2012-07-26  5:17       ` Aaron Lu
  2012-07-26 14:58         ` Alan Stern
  0 siblings, 1 reply; 95+ messages in thread
From: Aaron Lu @ 2012-07-26  5:17 UTC (permalink / raw)
  To: James Bottomley, Alan Stern
  Cc: Jeff Garzik, linux-scsi, Lin Ming, linux-ide, LKML

On 07/26/2012 01:05 PM, James Bottomley wrote:
> On Thu, 2012-07-26 at 12:47 +0800, Aaron Lu wrote:
>> On 07/26/2012 05:38 AM, Jeff Garzik wrote:
>>> On 07/25/2012 04:35 PM, Jeff Garzik wrote:
>>>> * Updating libata to directly bind with ACPI / runtime power mgmt.
>>>> This is a pre-req for SATA ZPODD (CD-ROM power management).
>>>>
>>>> Touches ACPI (exports++) and SCSI in minor ways. Has been in linux-next
>>>> for weeks.
>>>>
>>>> The rest of [ZPODD] will probably come via SCSI tree, as it involves
>>>> a lot of updates to the 'sr' driver etc.
>>>
>>> BTW Lin and Aaron, note that this did not include these changes:
>>>
>>> sr: check support for device busy class events
>>> sr: support zero power ODD
>>> sr: make sure ODD is in resumed state in block ioctl
>>>
>>> as in the end I wanted to put the brakes on SCSI-touching patches. These
>>> should be able to go into James' scsi-misc tree with the other SCSI-area
>>> ZPODD changes.
>>>
>>> For those three 'sr' changes listed above, you may add
>>>
>>> Acked-by: Jeff Garzik<jgarzik@redhat.com>
>>>
>>> when moving them over.
>>
>> Thanks Jeff.
>>
>> Hi James,
>> I'll prepare these dropped patches plus some other fixes for ZPODD which
>> I've sent v2 recently and merge them into v3 for you to review.
>
> They weren't exactly dropped ... I've been waiting for you to address
> Alan Stern's comments, since he's our resident expert on suspend/resume.

Oh, I forgot to mention, that I agree with Alan's comments and have
addressed them in my v2 patches here:
http://marc.info/?l=linux-scsi&m=134312317325650&w=2

The 2 patches Alan has comments are:
http://marc.info/?l=linux-scsi&m=134312311025619&w=2
http://marc.info/?l=linux-scsi&m=134312308225610&w=2

Hi Alan,
Are the v2 patches look OK to you?

And James,
Do you want me to rebase these patches on top of scsi-misc tree?

Thanks,
Aaron


^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-26  4:47   ` Aaron Lu
@ 2012-07-26  5:05     ` James Bottomley
  2012-07-26  5:17       ` Aaron Lu
  0 siblings, 1 reply; 95+ messages in thread
From: James Bottomley @ 2012-07-26  5:05 UTC (permalink / raw)
  To: Aaron Lu; +Cc: Jeff Garzik, linux-scsi, Lin Ming, linux-ide, LKML

On Thu, 2012-07-26 at 12:47 +0800, Aaron Lu wrote:
> On 07/26/2012 05:38 AM, Jeff Garzik wrote:
> > On 07/25/2012 04:35 PM, Jeff Garzik wrote:
> >> * Updating libata to directly bind with ACPI / runtime power mgmt.
> >> This is a pre-req for SATA ZPODD (CD-ROM power management).
> >>
> >> Touches ACPI (exports++) and SCSI in minor ways. Has been in linux-next
> >> for weeks.
> >>
> >> The rest of [ZPODD] will probably come via SCSI tree, as it involves
> >> a lot of updates to the 'sr' driver etc.
> >
> > BTW Lin and Aaron, note that this did not include these changes:
> >
> > sr: check support for device busy class events
> > sr: support zero power ODD
> > sr: make sure ODD is in resumed state in block ioctl
> >
> > as in the end I wanted to put the brakes on SCSI-touching patches. These
> > should be able to go into James' scsi-misc tree with the other SCSI-area
> > ZPODD changes.
> >
> > For those three 'sr' changes listed above, you may add
> >
> > Acked-by: Jeff Garzik <jgarzik@redhat.com>
> >
> > when moving them over.
> 
> Thanks Jeff.
> 
> Hi James,
> I'll prepare these dropped patches plus some other fixes for ZPODD which
> I've sent v2 recently and merge them into v3 for you to review.

They weren't exactly dropped ... I've been waiting for you to address
Alan Stern's comments, since he's our resident expert on suspend/resume.

James



^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 21:38 ` Jeff Garzik
@ 2012-07-26  4:47   ` Aaron Lu
  2012-07-26  5:05     ` James Bottomley
  0 siblings, 1 reply; 95+ messages in thread
From: Aaron Lu @ 2012-07-26  4:47 UTC (permalink / raw)
  To: Jeff Garzik, James Bottomley; +Cc: linux-scsi, Lin Ming, linux-ide, LKML

On 07/26/2012 05:38 AM, Jeff Garzik wrote:
> On 07/25/2012 04:35 PM, Jeff Garzik wrote:
>> * Updating libata to directly bind with ACPI / runtime power mgmt.
>> This is a pre-req for SATA ZPODD (CD-ROM power management).
>>
>> Touches ACPI (exports++) and SCSI in minor ways. Has been in linux-next
>> for weeks.
>>
>> The rest of [ZPODD] will probably come via SCSI tree, as it involves
>> a lot of updates to the 'sr' driver etc.
>
> BTW Lin and Aaron, note that this did not include these changes:
>
> sr: check support for device busy class events
> sr: support zero power ODD
> sr: make sure ODD is in resumed state in block ioctl
>
> as in the end I wanted to put the brakes on SCSI-touching patches. These
> should be able to go into James' scsi-misc tree with the other SCSI-area
> ZPODD changes.
>
> For those three 'sr' changes listed above, you may add
>
> Acked-by: Jeff Garzik <jgarzik@redhat.com>
>
> when moving them over.

Thanks Jeff.

Hi James,
I'll prepare these dropped patches plus some other fixes for ZPODD which
I've sent v2 recently and merge them into v3 for you to review.

Thanks,
Aaron


^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 23:30           ` Linus Torvalds
@ 2012-07-26  2:10             ` Jeff Garzik
  2012-07-26 17:14               ` Linus Torvalds
  2012-07-26  7:44             ` Ingo Molnar
  1 sibling, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2012-07-26  2:10 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On 07/25/2012 07:30 PM, Linus Torvalds wrote:
> On Wed, Jul 25, 2012 at 3:58 PM, Jeff Garzik <jgarzik@pobox.com> wrote:
>>
>> What is the right course in when a post-merge change is needed?
>
> Just describe the issue and the required change. Than I can just do it
> as part of the merge, and now the whole series is bisectable,
> including the merge itself.
>
> Here's a (fairly bad) example:
>
>    http://www.spinics.net/lists/netdev/msg192349.html
>
> and the reason I call that a bad example is not because that's a bad
> pull request, but simply that those are all real data conflicts, not
> the more subtle kind of "it merges fine, but because new code
> introduced uses an interface that changed, you need to do xyz".

Thanks, so noted.  I guess if the merge gets more complex than something 
easily described in an email, that implies that maintainers should do 
more cross-coordination and maybe a merge tree.

What's the best way for libata to move forward, now that this hideous 
merge has been pushed out to the Well Known libata branches?  The 
pre-jgarzik-merge commit you would have pulled is 
dc7f71f486f4f5fa96f6dcf86833da020cde8a11 had my pull request been proper.

I can lop off the top 3 commits and force-update the libata-dev.git 
branches, then send a new pull request -- but you have grumbled at that 
sort of behavior in maintainer trees before too...

	Jeff



^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 22:58         ` Jeff Garzik
@ 2012-07-25 23:30           ` Linus Torvalds
  2012-07-26  2:10             ` Jeff Garzik
  2012-07-26  7:44             ` Ingo Molnar
  0 siblings, 2 replies; 95+ messages in thread
From: Linus Torvalds @ 2012-07-25 23:30 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On Wed, Jul 25, 2012 at 3:58 PM, Jeff Garzik <jgarzik@pobox.com> wrote:
>
> What is the right course in when a post-merge change is needed?

Just describe the issue and the required change. Than I can just do it
as part of the merge, and now the whole series is bisectable,
including the merge itself.

Here's a (fairly bad) example:

  http://www.spinics.net/lists/netdev/msg192349.html

and the reason I call that a bad example is not because that's a bad
pull request, but simply that those are all real data conflicts, not
the more subtle kind of "it merges fine, but because new code
introduced uses an interface that changed, you need to do xyz".

I couldn't find an example of that in a quick look, it's fairly
uncommon to have non-conflicting merges that had semantic - but not
contextual - conflicts. (Although it does happen, and sometimes it's
actually not the developer, but Stephen Rothwell who notices it in
-next and lets me know before the merge).

                  Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 22:31       ` Linus Torvalds
@ 2012-07-25 22:58         ` Jeff Garzik
  2012-07-25 23:30           ` Linus Torvalds
  0 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2012-07-25 22:58 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On 07/25/2012 06:31 PM, Linus Torvalds wrote:
> On Wed, Jul 25, 2012 at 3:26 PM, Jeff Garzik <jgarzik@pobox.com> wrote:
>>
>> Even so, separately, it still needed that post-merge compile fix.
>
> And that's yet another example of how *NOT* to do things.
>
> If the merge has errors like that, then they should be fixed up in the merge.
>
> Please. Don't do this. Let me merge stuff, and you explain in the pull
> request why it gets merge problems. Not this mess.
>
> That merge itself was *trivial*. I do those kinds of fixups in my
> sleep and you don't even need to explain those. The non-trivial part
> you did as a separate commit. But neither of those should have been
> "I'll pre-merge for Linus so that he doesn't see these problems".

What is the right course in when a post-merge change is needed?

	Jeff






^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 22:26     ` Jeff Garzik
@ 2012-07-25 22:31       ` Linus Torvalds
  2012-07-25 22:58         ` Jeff Garzik
  0 siblings, 1 reply; 95+ messages in thread
From: Linus Torvalds @ 2012-07-25 22:31 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On Wed, Jul 25, 2012 at 3:26 PM, Jeff Garzik <jgarzik@pobox.com> wrote:
>
> Even so, separately, it still needed that post-merge compile fix.

And that's yet another example of how *NOT* to do things.

If the merge has errors like that, then they should be fixed up in the merge.

Please. Don't do this. Let me merge stuff, and you explain in the pull
request why it gets merge problems. Not this mess.

That merge itself was *trivial*. I do those kinds of fixups in my
sleep and you don't even need to explain those. The non-trivial part
you did as a separate commit. But neither of those should have been
"I'll pre-merge for Linus so that he doesn't see these problems".

          Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 22:06   ` Linus Torvalds
@ 2012-07-25 22:26     ` Jeff Garzik
  2012-07-25 22:31       ` Linus Torvalds
  0 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2012-07-25 22:26 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On 07/25/2012 06:06 PM, Linus Torvalds wrote:
> On Wed, Jul 25, 2012 at 1:43 PM, Jeff Garzik <jeff@garzik.org> wrote:
>> On Wed, Jul 25, 2012 at 04:35:51PM -0400, Jeff Garzik wrote:
>>> Please pull 641589bff714f39b33ef1d7f02eaa009f2993b64 from
>>> git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream
>>>
>>
>> Oh, I forgot to point out the merge commit, making my HEAD more recent
>> than might be expected.  There was a merge conflict and an API change
>> that needed to be dealt with, in order for your pull to be correct.
>
> So I'd *much* rather see an explanation of what the conflict is when
> you ask me to pull, and let me handle it, rather than you pre-merging
> things for me. I *want* to see conflicts between subsystems.
> Seriously.

Tried to add some explanation to the merge commit itself, giving plenty 
of detail.

Even so, separately, it still needed that post-merge compile fix.

	Jeff




^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 20:43 ` Jeff Garzik
@ 2012-07-25 22:06   ` Linus Torvalds
  2012-07-25 22:26     ` Jeff Garzik
  0 siblings, 1 reply; 95+ messages in thread
From: Linus Torvalds @ 2012-07-25 22:06 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, linux-ide, linux-scsi, LKML

On Wed, Jul 25, 2012 at 1:43 PM, Jeff Garzik <jeff@garzik.org> wrote:
> On Wed, Jul 25, 2012 at 04:35:51PM -0400, Jeff Garzik wrote:
>> Please pull 641589bff714f39b33ef1d7f02eaa009f2993b64 from
>> git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream
>>
>
> Oh, I forgot to point out the merge commit, making my HEAD more recent
> than might be expected.  There was a merge conflict and an API change
> that needed to be dealt with, in order for your pull to be correct.

So I'd *much* rather see an explanation of what the conflict is when
you ask me to pull, and let me handle it, rather than you pre-merging
things for me. I *want* to see conflicts between subsystems.
Seriously.

                   Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 20:35 Jeff Garzik
  2012-07-25 20:43 ` Jeff Garzik
@ 2012-07-25 21:38 ` Jeff Garzik
  2012-07-26  4:47   ` Aaron Lu
  1 sibling, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2012-07-25 21:38 UTC (permalink / raw)
  To: linux-scsi, Lin Ming, Aaron Lu, James Bottomley; +Cc: linux-ide, LKML

On 07/25/2012 04:35 PM, Jeff Garzik wrote:
>
> Please pull 641589bff714f39b33ef1d7f02eaa009f2993b64 from
> git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream
>
> (text copied from the upstream-linus tag)
> Notable changes:
>
> * Updating libata to directly bind with ACPI / runtime power mgmt.
>    This is a pre-req for SATA ZPODD (CD-ROM power management).
>
>    Touches ACPI (exports++) and SCSI in minor ways.  Has been in linux-next
>    for weeks.
>
>    The rest of [ZPODD] will probably come via SCSI tree, as it involves
>    a lot of updates to the 'sr' driver etc.

BTW Lin and Aaron, note that this did not include these changes:

       sr: check support for device busy class events
       sr: support zero power ODD
       sr: make sure ODD is in resumed state in block ioctl

as in the end I wanted to put the brakes on SCSI-touching patches. 
These should be able to go into James' scsi-misc tree with the other 
SCSI-area ZPODD changes.

For those three 'sr' changes listed above, you may add

	Acked-by: Jeff Garzik <jgarzik@redhat.com>

when moving them over.

	Jeff




^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2012-07-25 20:35 Jeff Garzik
@ 2012-07-25 20:43 ` Jeff Garzik
  2012-07-25 22:06   ` Linus Torvalds
  2012-07-25 21:38 ` Jeff Garzik
  1 sibling, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2012-07-25 20:43 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, linux-scsi, LKML

On Wed, Jul 25, 2012 at 04:35:51PM -0400, Jeff Garzik wrote:
> Please pull 641589bff714f39b33ef1d7f02eaa009f2993b64 from
> git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream
> 

Oh, I forgot to point out the merge commit, making my HEAD more recent
than might be expected.  There was a merge conflict and an API change
that needed to be dealt with, in order for your pull to be correct.

	Jeff




^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2012-07-25 20:35 Jeff Garzik
  2012-07-25 20:43 ` Jeff Garzik
  2012-07-25 21:38 ` Jeff Garzik
  0 siblings, 2 replies; 95+ messages in thread
From: Jeff Garzik @ 2012-07-25 20:35 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, linux-scsi, LKML


Please pull 641589bff714f39b33ef1d7f02eaa009f2993b64 from
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git tags/upstream

(text copied from the upstream-linus tag)
Notable changes:
    
* Updating libata to directly bind with ACPI / runtime power mgmt.
  This is a pre-req for SATA ZPODD (CD-ROM power management).

  Touches ACPI (exports++) and SCSI in minor ways.  Has been in linux-next
  for weeks.

  The rest of [ZPODD] will probably come via SCSI tree, as it involves
  a lot of updates to the 'sr' driver etc.

Other, minor changes:

* module_pci_driver() removes a lot of common boilerplate from each
  PCI driver

* minor coding style, whitespace cleanups

* pata_pcmcia bug fix, caught by Coccinelle

* pata_imx, sata_dwc_460ex minor vendor updates

* ahci_platform: use simple PM ops, and thereby add hibernation cb's

* Add a few device-specific quirks


to receive the following updates:

 drivers/acpi/glue.c             |    4 +-
 drivers/acpi/power.c            |    2 +
 drivers/acpi/sleep.c            |    2 +
 drivers/ata/acard-ahci.c        |   13 +--
 drivers/ata/ahci.c              |   63 +++----
 drivers/ata/ahci_platform.c     |   10 +-
 drivers/ata/ata_generic.c       |   15 +--
 drivers/ata/libata-acpi.c       |  408 ++++++++++++++++++++++++++++-----------
 drivers/ata/libata-core.c       |   12 +-
 drivers/ata/libata-eh.c         |    2 +-
 drivers/ata/libata-pmp.c        |    4 -
 drivers/ata/libata-scsi.c       |    3 +
 drivers/ata/libata-transport.c  |    6 +-
 drivers/ata/libata.h            |   15 +-
 drivers/ata/pata_acpi.c         |   18 +--
 drivers/ata/pata_amd.c          |   13 +--
 drivers/ata/pata_artop.c        |   13 +--
 drivers/ata/pata_atiixp.c       |   14 +--
 drivers/ata/pata_atp867x.c      |   13 +--
 drivers/ata/pata_cmd640.c       |   13 +--
 drivers/ata/pata_cmd64x.c       |   17 +--
 drivers/ata/pata_cs5520.c       |   14 +--
 drivers/ata/pata_cs5530.c       |   13 +--
 drivers/ata/pata_cs5535.c       |   13 +--
 drivers/ata/pata_cs5536.c       |   13 +--
 drivers/ata/pata_cypress.c      |   15 +--
 drivers/ata/pata_efar.c         |   14 +--
 drivers/ata/pata_hpt366.c       |   13 +--
 drivers/ata/pata_hpt37x.c       |   13 +--
 drivers/ata/pata_hpt3x2n.c      |   13 +--
 drivers/ata/pata_hpt3x3.c       |   15 +--
 drivers/ata/pata_imx.c          |   10 +-
 drivers/ata/pata_it8213.c       |   13 +--
 drivers/ata/pata_it821x.c       |   14 +--
 drivers/ata/pata_jmicron.c      |   13 +--
 drivers/ata/pata_marvell.c      |   14 +--
 drivers/ata/pata_mpiix.c        |   13 +--
 drivers/ata/pata_netcell.c      |   14 +--
 drivers/ata/pata_ninja32.c      |   13 +--
 drivers/ata/pata_ns87410.c      |   13 +--
 drivers/ata/pata_ns87415.c      |   13 +--
 drivers/ata/pata_oldpiix.c      |   14 +--
 drivers/ata/pata_opti.c         |   14 +--
 drivers/ata/pata_optidma.c      |   13 +--
 drivers/ata/pata_pcmcia.c       |    3 +-
 drivers/ata/pata_pdc2027x.c     |   19 +--
 drivers/ata/pata_pdc202xx_old.c |   13 +--
 drivers/ata/pata_piccolo.c      |   16 +--
 drivers/ata/pata_radisys.c      |   14 +--
 drivers/ata/pata_rdc.c          |   13 +--
 drivers/ata/pata_rz1000.c       |   14 +--
 drivers/ata/pata_sc1200.c       |   13 +--
 drivers/ata/pata_scc.c          |   21 +--
 drivers/ata/pata_sch.c          |   13 +--
 drivers/ata/pata_serverworks.c  |   13 +--
 drivers/ata/pata_sil680.c       |   13 +--
 drivers/ata/pata_sis.c          |   14 +--
 drivers/ata/pata_sl82c105.c     |   13 +--
 drivers/ata/pata_triflex.c      |   13 +--
 drivers/ata/pata_via.c          |   13 +--
 drivers/ata/pdc_adma.c          |   13 +--
 drivers/ata/sata_dwc_460ex.c    |   72 +++++--
 drivers/ata/sata_inic162x.c     |   13 +--
 drivers/ata/sata_nv.c           |   13 +--
 drivers/ata/sata_promise.c      |   13 +--
 drivers/ata/sata_qstor.c        |   13 +--
 drivers/ata/sata_sil.c          |   14 +--
 drivers/ata/sata_sil24.c        |   13 +--
 drivers/ata/sata_sis.c          |   13 +--
 drivers/ata/sata_svw.c          |   13 +--
 drivers/ata/sata_sx4.c          |   16 +--
 drivers/ata/sata_uli.c          |   14 +--
 drivers/ata/sata_via.c          |   13 +--
 drivers/ata/sata_vsc.c          |   13 +--
 drivers/scsi/scsi_lib.c         |   17 ++
 include/linux/ata.h             |    1 +
 include/linux/libata.h          |    9 +-
 include/scsi/scsi.h             |   10 +
 include/scsi/scsi_device.h      |    1 +
 79 files changed, 510 insertions(+), 959 deletions(-)
 mode change 100644 => 100755 drivers/ata/sata_dwc_460ex.c

Aaron Lu (1):
      libata: tell scsi layer device supports runtime power off

Axel Lin (1):
      ata: use module_pci_driver

Daniel J Blueman (1):
      [libata] Prevent interface errors with Seagate FreeAgent GoFlex

Fabio Estevam (1):
      pata_imx: Convert to clk_prepare_enable/clk_disable_unprepare

H Hartley Sweeten (2):
      libata-transport.c: local functions should not be exposed globally
      libata-eh.c: local functions should not be exposed globally

Holger Macht (1):
      [SCSI] add wrapper to access and set scsi_bus_type in struct acpi_bus_type

Jeff Garzik (2):
      drivers/acpi/glue: revert accidental license-related 6b66d95895c bits
      [libata] pata_cmd64x: whitespace cleanup

Jeffrin Jose (1):
      ahci, trivial: fixed coding style issues related to braces

Julia Lawall (1):
      drivers/ata/pata_pcmcia.c: adjust suspicious bit operation

Lin Ming (5):
      libata-acpi: set acpi state for SATA port
      libata-acpi: add ata port runtime D3Cold support
      libata-acpi: register/unregister device to/from power resource
      libata: detect Device Attention support
      libata-acpi: add missing inlines in libata.h

Mark Nelson (1):
      ahci: Enable SB600 64bit DMA on MSI K9AGM2 (MS-7327) v2

Matthew Garrett (2):
      libata: bind the Linux device tree to the ACPI device tree
      libata: migrate ACPI code over to new bindings

Shiraz Hashim (1):
      ahci_platform: add hibernation callbacks

Stephen Rothwell (1):
      libata-acpi: fix up for acpi_pm_device_sleep_state API

Thang Q. Nguyen (2):
      sata_dwc_460ex: support hardreset
      sata_dwc_460ex: device tree may specify dma_channel

diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c
index 1564e09..243ee85 100644
--- a/drivers/acpi/glue.c
+++ b/drivers/acpi/glue.c
@@ -39,6 +39,7 @@ int register_acpi_bus_type(struct acpi_bus_type *type)
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(register_acpi_bus_type);
 
 int unregister_acpi_bus_type(struct acpi_bus_type *type)
 {
@@ -54,6 +55,7 @@ int unregister_acpi_bus_type(struct acpi_bus_type *type)
 	}
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(unregister_acpi_bus_type);
 
 static struct acpi_bus_type *acpi_get_bus_type(struct bus_type *type)
 {
@@ -69,7 +71,6 @@ static struct acpi_bus_type *acpi_get_bus_type(struct bus_type *type)
 	up_read(&bus_type_sem);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(register_acpi_bus_type);
 
 static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle)
 {
@@ -86,7 +87,6 @@ static int acpi_find_bridge_device(struct device *dev, acpi_handle * handle)
 	up_read(&bus_type_sem);
 	return ret;
 }
-EXPORT_SYMBOL_GPL(unregister_acpi_bus_type);
 
 /* Get device's handler per its address under its parent */
 struct acpi_find_child {
diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c
index 894d45c..215ecd0 100644
--- a/drivers/acpi/power.c
+++ b/drivers/acpi/power.c
@@ -392,6 +392,7 @@ void acpi_power_resource_unregister_device(struct device *dev, acpi_handle handl
 		__acpi_power_resource_unregister_device(dev,
 			list->handles[i]);
 }
+EXPORT_SYMBOL_GPL(acpi_power_resource_unregister_device);
 
 static int __acpi_power_resource_register_device(
 	struct acpi_power_managed_device *powered_device, acpi_handle handle)
@@ -462,6 +463,7 @@ no_power_resource:
 	printk(KERN_WARNING PREFIX "Invalid Power Resource to register!");
 	return -ENODEV;
 }
+EXPORT_SYMBOL_GPL(acpi_power_resource_register_device);
 
 /**
  * acpi_device_sleep_wake - execute _DSW (Device Sleep Wake) or (deprecated in
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 1cc02ca..028dd42 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -809,6 +809,7 @@ int acpi_pm_device_sleep_state(struct device *dev, int *d_min_p, int d_max_in)
 	}
 	return d_max;
 }
+EXPORT_SYMBOL(acpi_pm_device_sleep_state);
 #endif /* CONFIG_PM */
 
 #ifdef CONFIG_PM_SLEEP
@@ -845,6 +846,7 @@ int acpi_pm_device_run_wake(struct device *phys_dev, bool enable)
 
 	return 0;
 }
+EXPORT_SYMBOL(acpi_pm_device_run_wake);
 
 /**
  *	acpi_pm_device_sleep_wake - enable or disable the system wake-up
diff --git a/drivers/ata/acard-ahci.c b/drivers/ata/acard-ahci.c
index 3bc8c79..4e94ba2 100644
--- a/drivers/ata/acard-ahci.c
+++ b/drivers/ata/acard-ahci.c
@@ -503,21 +503,10 @@ static int acard_ahci_init_one(struct pci_dev *pdev, const struct pci_device_id
 				 &acard_ahci_sht);
 }
 
-static int __init acard_ahci_init(void)
-{
-	return pci_register_driver(&acard_ahci_pci_driver);
-}
-
-static void __exit acard_ahci_exit(void)
-{
-	pci_unregister_driver(&acard_ahci_pci_driver);
-}
+module_pci_driver(acard_ahci_pci_driver);
 
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("ACard AHCI SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, acard_ahci_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(acard_ahci_init);
-module_exit(acard_ahci_exit);
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ebaf67e..062e6a1 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -105,31 +105,27 @@ static struct ata_port_operations ahci_p5wdh_ops = {
 
 static const struct ata_port_info ahci_port_info[] = {
 	/* by features */
-	[board_ahci] =
-	{
+	[board_ahci] = {
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_ign_iferr] =
-	{
+	[board_ahci_ign_iferr] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_IRQ_IF_ERR),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_nosntf] =
-	{
+	[board_ahci_nosntf] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_SNTF),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_yes_fbs] =
-	{
+	[board_ahci_yes_fbs] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_YES_FBS),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
@@ -137,8 +133,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.port_ops	= &ahci_ops,
 	},
 	/* by chipsets */
-	[board_ahci_mcp65] =
-	{
+	[board_ahci_mcp65] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP |
 				 AHCI_HFLAG_YES_NCQ),
 		.flags		= AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
@@ -146,24 +141,21 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_mcp77] =
-	{
+	[board_ahci_mcp77] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_mcp89] =
-	{
+	[board_ahci_mcp89] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_FPDMA_AA),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_mv] =
-	{
+	[board_ahci_mv] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_MSI |
 				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
@@ -171,8 +163,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	[board_ahci_sb600] =
-	{
+	[board_ahci_sb600] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL |
 				 AHCI_HFLAG_NO_MSI | AHCI_HFLAG_SECT255 |
 				 AHCI_HFLAG_32BIT_ONLY),
@@ -181,16 +172,14 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_pmp_retry_srst_ops,
 	},
-	[board_ahci_sb700] =	/* for SB700 and SB800 */
-	{
+	[board_ahci_sb700] = {	/* for SB700 and SB800 */
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_pmp_retry_srst_ops,
 	},
-	[board_ahci_vt8251] =
-	{
+	[board_ahci_vt8251] = {
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
 		.pio_mask	= ATA_PIO4,
@@ -777,6 +766,22 @@ static bool ahci_sb600_enable_64bit(struct pci_dev *pdev)
 			},
 		},
 		/*
+		 * All BIOS versions for the MSI K9AGM2 (MS-7327) support
+		 * 64bit DMA.
+		 *
+		 * This board also had the typo mentioned above in the
+		 * Manufacturer DMI field (fixed in BIOS version 1.5), so
+		 * match on DMI_BOARD_VENDOR of "MICRO-STAR INTER" again.
+		 */
+		{
+			.ident = "MSI K9AGM2",
+			.matches = {
+				DMI_MATCH(DMI_BOARD_VENDOR,
+					  "MICRO-STAR INTER"),
+				DMI_MATCH(DMI_BOARD_NAME, "MS-7327"),
+			},
+		},
+		/*
 		 * All BIOS versions for the Asus M3A support 64bit DMA.
 		 * (all release versions from 0301 to 1206 were tested)
 		 */
@@ -1233,22 +1238,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				 &ahci_sht);
 }
 
-static int __init ahci_init(void)
-{
-	return pci_register_driver(&ahci_pci_driver);
-}
-
-static void __exit ahci_exit(void)
-{
-	pci_unregister_driver(&ahci_pci_driver);
-}
-
+module_pci_driver(ahci_pci_driver);
 
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("AHCI SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ahci_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(ahci_init);
-module_exit(ahci_exit);
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 9e419e1..09728e0 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/gfp.h>
 #include <linux/module.h>
+#include <linux/pm.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/device.h>
@@ -271,13 +272,10 @@ static int ahci_resume(struct device *dev)
 
 	return 0;
 }
-
-static struct dev_pm_ops ahci_pm_ops = {
-	.suspend		= &ahci_suspend,
-	.resume			= &ahci_resume,
-};
 #endif
 
+SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
+
 static const struct of_device_id ahci_of_match[] = {
 	{ .compatible = "calxeda,hb-ahci", },
 	{ .compatible = "snps,spear-ahci", },
@@ -291,9 +289,7 @@ static struct platform_driver ahci_driver = {
 		.name = "ahci",
 		.owner = THIS_MODULE,
 		.of_match_table = ahci_of_match,
-#ifdef CONFIG_PM
 		.pm = &ahci_pm_ops,
-#endif
 	},
 	.id_table	= ahci_devtype,
 };
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index aae1156..f8f38a0 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -255,17 +255,7 @@ static struct pci_driver ata_generic_pci_driver = {
 #endif
 };
 
-static int __init ata_generic_init(void)
-{
-	return pci_register_driver(&ata_generic_pci_driver);
-}
-
-
-static void __exit ata_generic_exit(void)
-{
-	pci_unregister_driver(&ata_generic_pci_driver);
-}
-
+module_pci_driver(ata_generic_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for generic ATA");
@@ -273,7 +263,4 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ata_generic);
 MODULE_VERSION(DRV_VERSION);
 
-module_init(ata_generic_init);
-module_exit(ata_generic_exit);
-
 module_param(all_generic_ide, int, 0);
diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index bb7c5f1..902b5a4 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -16,6 +16,7 @@
 #include <linux/libata.h>
 #include <linux/pci.h>
 #include <linux/slab.h>
+#include <linux/pm_runtime.h>
 #include <scsi/scsi_device.h>
 #include "libata.h"
 
@@ -48,62 +49,53 @@ static void ata_acpi_clear_gtf(struct ata_device *dev)
 }
 
 /**
- * ata_acpi_associate_sata_port - associate SATA port with ACPI objects
- * @ap: target SATA port
+ * ata_ap_acpi_handle - provide the acpi_handle for an ata_port
+ * @ap: the acpi_handle returned will correspond to this port
  *
- * Look up ACPI objects associated with @ap and initialize acpi_handle
- * fields of @ap, the port and devices accordingly.
- *
- * LOCKING:
- * EH context.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
+ * Returns the acpi_handle for the ACPI namespace object corresponding to
+ * the ata_port passed into the function, or NULL if no such object exists
  */
-void ata_acpi_associate_sata_port(struct ata_port *ap)
+acpi_handle ata_ap_acpi_handle(struct ata_port *ap)
 {
-	WARN_ON(!(ap->flags & ATA_FLAG_ACPI_SATA));
-
-	if (!sata_pmp_attached(ap)) {
-		u64 adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
-
-		ap->link.device->acpi_handle =
-			acpi_get_child(ap->host->acpi_handle, adr);
-	} else {
-		struct ata_link *link;
-
-		ap->link.device->acpi_handle = NULL;
-
-		ata_for_each_link(link, ap, EDGE) {
-			u64 adr = SATA_ADR(ap->port_no, link->pmp);
+	if (ap->flags & ATA_FLAG_ACPI_SATA)
+		return NULL;
 
-			link->device->acpi_handle =
-				acpi_get_child(ap->host->acpi_handle, adr);
-		}
-	}
+	/*
+	 * If acpi bind operation has already happened, we can get the handle
+	 * for the port by checking the corresponding scsi_host device's
+	 * firmware node, otherwise we will need to find out the handle from
+	 * its parent's acpi node.
+	 */
+	if (ap->scsi_host)
+		return DEVICE_ACPI_HANDLE(&ap->scsi_host->shost_gendev);
+	else
+		return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev),
+				ap->port_no);
 }
+EXPORT_SYMBOL(ata_ap_acpi_handle);
 
-static void ata_acpi_associate_ide_port(struct ata_port *ap)
+/**
+ * ata_dev_acpi_handle - provide the acpi_handle for an ata_device
+ * @dev: the acpi_device returned will correspond to this port
+ *
+ * Returns the acpi_handle for the ACPI namespace object corresponding to
+ * the ata_device passed into the function, or NULL if no such object exists
+ */
+acpi_handle ata_dev_acpi_handle(struct ata_device *dev)
 {
-	int max_devices, i;
-
-	ap->acpi_handle = acpi_get_child(ap->host->acpi_handle, ap->port_no);
-	if (!ap->acpi_handle)
-		return;
-
-	max_devices = 1;
-	if (ap->flags & ATA_FLAG_SLAVE_POSS)
-		max_devices++;
-
-	for (i = 0; i < max_devices; i++) {
-		struct ata_device *dev = &ap->link.device[i];
-
-		dev->acpi_handle = acpi_get_child(ap->acpi_handle, i);
-	}
+	acpi_integer adr;
+	struct ata_port *ap = dev->link->ap;
 
-	if (ata_acpi_gtm(ap, &ap->__acpi_init_gtm) == 0)
-		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
+	if (ap->flags & ATA_FLAG_ACPI_SATA) {
+		if (!sata_pmp_attached(ap))
+			adr = SATA_ADR(ap->port_no, NO_PORT_MULT);
+		else
+			adr = SATA_ADR(ap->port_no, dev->link->pmp);
+		return acpi_get_child(DEVICE_ACPI_HANDLE(ap->host->dev), adr);
+	} else
+		return acpi_get_child(ata_ap_acpi_handle(ap), dev->devno);
 }
+EXPORT_SYMBOL(ata_dev_acpi_handle);
 
 /* @ap and @dev are the same as ata_acpi_handle_hotplug() */
 static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev)
@@ -229,56 +221,6 @@ static const struct acpi_dock_ops ata_acpi_ap_dock_ops = {
 };
 
 /**
- * ata_acpi_associate - associate ATA host with ACPI objects
- * @host: target ATA host
- *
- * Look up ACPI objects associated with @host and initialize
- * acpi_handle fields of @host, its ports and devices accordingly.
- *
- * LOCKING:
- * EH context.
- *
- * RETURNS:
- * 0 on success, -errno on failure.
- */
-void ata_acpi_associate(struct ata_host *host)
-{
-	int i, j;
-
-	if (!is_pci_dev(host->dev) || libata_noacpi)
-		return;
-
-	host->acpi_handle = DEVICE_ACPI_HANDLE(host->dev);
-	if (!host->acpi_handle)
-		return;
-
-	for (i = 0; i < host->n_ports; i++) {
-		struct ata_port *ap = host->ports[i];
-
-		if (host->ports[0]->flags & ATA_FLAG_ACPI_SATA)
-			ata_acpi_associate_sata_port(ap);
-		else
-			ata_acpi_associate_ide_port(ap);
-
-		if (ap->acpi_handle) {
-			/* we might be on a docking station */
-			register_hotplug_dock_device(ap->acpi_handle,
-					     &ata_acpi_ap_dock_ops, ap);
-		}
-
-		for (j = 0; j < ata_link_max_devices(&ap->link); j++) {
-			struct ata_device *dev = &ap->link.device[j];
-
-			if (dev->acpi_handle) {
-				/* we might be on a docking station */
-				register_hotplug_dock_device(dev->acpi_handle,
-					     &ata_acpi_dev_dock_ops, dev);
-			}
-		}
-	}
-}
-
-/**
  * ata_acpi_dissociate - dissociate ATA host from ACPI objects
  * @host: target ATA host
  *
@@ -299,7 +241,7 @@ void ata_acpi_dissociate(struct ata_host *host)
 		struct ata_port *ap = host->ports[i];
 		const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
 
-		if (ap->acpi_handle && gtm)
+		if (ata_ap_acpi_handle(ap) && gtm)
 			ata_acpi_stm(ap, gtm);
 	}
 }
@@ -324,7 +266,8 @@ int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *gtm)
 	acpi_status status;
 	int rc = 0;
 
-	status = acpi_evaluate_object(ap->acpi_handle, "_GTM", NULL, &output);
+	status = acpi_evaluate_object(ata_ap_acpi_handle(ap), "_GTM", NULL,
+				      &output);
 
 	rc = -ENOENT;
 	if (status == AE_NOT_FOUND)
@@ -394,7 +337,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm)
 	input.count = 3;
 	input.pointer = in_params;
 
-	status = acpi_evaluate_object(ap->acpi_handle, "_STM", &input, NULL);
+	status = acpi_evaluate_object(ata_ap_acpi_handle(ap), "_STM", &input,
+				      NULL);
 
 	if (status == AE_NOT_FOUND)
 		return -ENOENT;
@@ -451,7 +395,8 @@ static int ata_dev_get_GTF(struct ata_device *dev, struct ata_acpi_gtf **gtf)
 			    __func__, ap->port_no);
 
 	/* _GTF has no input parameters */
-	status = acpi_evaluate_object(dev->acpi_handle, "_GTF", NULL, &output);
+	status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_GTF", NULL,
+				      &output);
 	out_obj = dev->gtf_cache = output.pointer;
 
 	if (ACPI_FAILURE(status)) {
@@ -817,7 +762,8 @@ static int ata_acpi_push_id(struct ata_device *dev)
 
 	/* It's OK for _SDD to be missing too. */
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
-	status = acpi_evaluate_object(dev->acpi_handle, "_SDD", &input, NULL);
+	status = acpi_evaluate_object(ata_dev_acpi_handle(dev), "_SDD", &input,
+				      NULL);
 	swap_buf_le16(dev->id, ATA_ID_WORDS);
 
 	if (status == AE_NOT_FOUND)
@@ -867,7 +813,7 @@ void ata_acpi_on_resume(struct ata_port *ap)
 	const struct ata_acpi_gtm *gtm = ata_acpi_init_gtm(ap);
 	struct ata_device *dev;
 
-	if (ap->acpi_handle && gtm) {
+	if (ata_ap_acpi_handle(ap) && gtm) {
 		/* _GTM valid */
 
 		/* restore timing parameters */
@@ -907,23 +853,39 @@ void ata_acpi_on_resume(struct ata_port *ap)
 void ata_acpi_set_state(struct ata_port *ap, pm_message_t state)
 {
 	struct ata_device *dev;
-
-	if (!ap->acpi_handle || (ap->flags & ATA_FLAG_ACPI_SATA))
-		return;
+	acpi_handle handle;
+	int acpi_state;
 
 	/* channel first and then drives for power on and vica versa
 	   for power off */
-	if (state.event == PM_EVENT_ON)
-		acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D0);
+	handle = ata_ap_acpi_handle(ap);
+	if (handle && state.event == PM_EVENT_ON)
+		acpi_bus_set_power(handle, ACPI_STATE_D0);
 
 	ata_for_each_dev(dev, &ap->link, ENABLED) {
-		if (dev->acpi_handle)
-			acpi_bus_set_power(dev->acpi_handle,
-				state.event == PM_EVENT_ON ?
-					ACPI_STATE_D0 : ACPI_STATE_D3);
+		handle = ata_dev_acpi_handle(dev);
+		if (!handle)
+			continue;
+
+		if (state.event != PM_EVENT_ON) {
+			acpi_state = acpi_pm_device_sleep_state(
+				&dev->sdev->sdev_gendev, NULL, ACPI_STATE_D3);
+			if (acpi_state > 0)
+				acpi_bus_set_power(handle, acpi_state);
+			/* TBD: need to check if it's runtime pm request */
+			acpi_pm_device_run_wake(
+				&dev->sdev->sdev_gendev, true);
+		} else {
+			/* Ditto */
+			acpi_pm_device_run_wake(
+				&dev->sdev->sdev_gendev, false);
+			acpi_bus_set_power(handle, ACPI_STATE_D0);
+		}
 	}
-	if (state.event != PM_EVENT_ON)
-		acpi_bus_set_power(ap->acpi_handle, ACPI_STATE_D3);
+
+	handle = ata_ap_acpi_handle(ap);
+	if (handle && state.event != PM_EVENT_ON)
+		acpi_bus_set_power(handle, ACPI_STATE_D3);
 }
 
 /**
@@ -948,7 +910,7 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
 	int nr_executed = 0;
 	int rc;
 
-	if (!dev->acpi_handle)
+	if (!ata_dev_acpi_handle(dev))
 		return 0;
 
 	/* do we need to do _GTF? */
@@ -994,7 +956,6 @@ int ata_acpi_on_devcfg(struct ata_device *dev)
 	}
 
 	ata_dev_warn(dev, "ACPI: failed the second time, disabled\n");
-	dev->acpi_handle = NULL;
 
 	/* We can safely continue if no _GTF command has been executed
 	 * and port is not frozen.
@@ -1018,3 +979,218 @@ void ata_acpi_on_disable(struct ata_device *dev)
 {
 	ata_acpi_clear_gtf(dev);
 }
+
+static void ata_acpi_wake_dev(acpi_handle handle, u32 event, void *context)
+{
+	struct ata_device *ata_dev = context;
+
+	if (event == ACPI_NOTIFY_DEVICE_WAKE && ata_dev &&
+			pm_runtime_suspended(&ata_dev->sdev->sdev_gendev))
+		scsi_autopm_get_device(ata_dev->sdev);
+}
+
+static void ata_acpi_add_pm_notifier(struct ata_device *dev)
+{
+	struct acpi_device *acpi_dev;
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ata_dev_acpi_handle(dev);
+	if (!handle)
+		return;
+
+	status = acpi_bus_get_device(handle, &acpi_dev);
+	if (ACPI_FAILURE(status))
+		return;
+
+	if (dev->sdev->can_power_off) {
+		acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+			ata_acpi_wake_dev, dev);
+		device_set_run_wake(&dev->sdev->sdev_gendev, true);
+	}
+}
+
+static void ata_acpi_remove_pm_notifier(struct ata_device *dev)
+{
+	struct acpi_device *acpi_dev;
+	acpi_handle handle;
+	acpi_status status;
+
+	handle = ata_dev_acpi_handle(dev);
+	if (!handle)
+		return;
+
+	status = acpi_bus_get_device(handle, &acpi_dev);
+	if (ACPI_FAILURE(status))
+		return;
+
+	if (dev->sdev->can_power_off) {
+		device_set_run_wake(&dev->sdev->sdev_gendev, false);
+		acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+			ata_acpi_wake_dev);
+	}
+}
+
+static void ata_acpi_register_power_resource(struct ata_device *dev)
+{
+	struct scsi_device *sdev = dev->sdev;
+	acpi_handle handle;
+	struct device *device;
+
+	handle = ata_dev_acpi_handle(dev);
+	if (!handle)
+		return;
+
+	device = &sdev->sdev_gendev;
+
+	acpi_power_resource_register_device(device, handle);
+}
+
+static void ata_acpi_unregister_power_resource(struct ata_device *dev)
+{
+	struct scsi_device *sdev = dev->sdev;
+	acpi_handle handle;
+	struct device *device;
+
+	handle = ata_dev_acpi_handle(dev);
+	if (!handle)
+		return;
+
+	device = &sdev->sdev_gendev;
+
+	acpi_power_resource_unregister_device(device, handle);
+}
+
+void ata_acpi_bind(struct ata_device *dev)
+{
+	ata_acpi_add_pm_notifier(dev);
+	ata_acpi_register_power_resource(dev);
+}
+
+void ata_acpi_unbind(struct ata_device *dev)
+{
+	ata_acpi_remove_pm_notifier(dev);
+	ata_acpi_unregister_power_resource(dev);
+}
+
+static int compat_pci_ata(struct ata_port *ap)
+{
+	struct device *dev = ap->tdev.parent;
+	struct pci_dev *pdev;
+
+	if (!is_pci_dev(dev))
+		return 0;
+
+	pdev = to_pci_dev(dev);
+
+	if ((pdev->class >> 8) != PCI_CLASS_STORAGE_SATA &&
+	    (pdev->class >> 8) != PCI_CLASS_STORAGE_IDE)
+		return 0;
+
+	return 1;
+}
+
+static int ata_acpi_bind_host(struct ata_port *ap, acpi_handle *handle)
+{
+	if (ap->flags & ATA_FLAG_ACPI_SATA)
+		return -ENODEV;
+
+	*handle = acpi_get_child(DEVICE_ACPI_HANDLE(ap->tdev.parent),
+			ap->port_no);
+
+	if (!*handle)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int ata_acpi_bind_device(struct ata_port *ap, struct scsi_device *sdev,
+				acpi_handle *handle)
+{
+	struct ata_device *ata_dev;
+	acpi_status status;
+	struct acpi_device *acpi_dev;
+	struct acpi_device_power_state *states;
+
+	if (ap->flags & ATA_FLAG_ACPI_SATA)
+		ata_dev = &ap->link.device[sdev->channel];
+	else
+		ata_dev = &ap->link.device[sdev->id];
+
+	*handle = ata_dev_acpi_handle(ata_dev);
+
+	if (!*handle)
+		return -ENODEV;
+
+	status = acpi_bus_get_device(*handle, &acpi_dev);
+	if (ACPI_FAILURE(status))
+		return 0;
+
+	/*
+	 * If firmware has _PS3 or _PR3 for this device,
+	 * and this ata ODD device support device attention,
+	 * it means this device can be powered off
+	 */
+	states = acpi_dev->power.states;
+	if ((states[ACPI_STATE_D3_HOT].flags.valid ||
+			states[ACPI_STATE_D3_COLD].flags.explicit_set) &&
+			ata_dev->flags & ATA_DFLAG_DA)
+		sdev->can_power_off = 1;
+
+	return 0;
+}
+
+static int is_ata_port(const struct device *dev)
+{
+	return dev->type == &ata_port_type;
+}
+
+static struct ata_port *dev_to_ata_port(struct device *dev)
+{
+	while (!is_ata_port(dev)) {
+		if (!dev->parent)
+			return NULL;
+		dev = dev->parent;
+	}
+	return to_ata_port(dev);
+}
+
+static int ata_acpi_find_device(struct device *dev, acpi_handle *handle)
+{
+	struct ata_port *ap = dev_to_ata_port(dev);
+
+	if (!ap)
+		return -ENODEV;
+
+	if (!compat_pci_ata(ap))
+		return -ENODEV;
+
+	if (scsi_is_host_device(dev))
+		return ata_acpi_bind_host(ap, handle);
+	else if (scsi_is_sdev_device(dev)) {
+		struct scsi_device *sdev = to_scsi_device(dev);
+
+		return ata_acpi_bind_device(ap, sdev, handle);
+	} else
+		return -ENODEV;
+}
+
+static int ata_acpi_find_dummy(struct device *dev, acpi_handle *handle)
+{
+	return -ENODEV;
+}
+
+static struct acpi_bus_type ata_acpi_bus = {
+	.find_bridge = ata_acpi_find_dummy,
+	.find_device = ata_acpi_find_device,
+};
+
+int ata_acpi_register(void)
+{
+	return scsi_register_acpi_bus_type(&ata_acpi_bus);
+}
+
+void ata_acpi_unregister(void)
+{
+	scsi_unregister_acpi_bus_type(&ata_acpi_bus);
+}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 3fe1202..fadd586 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2376,6 +2376,9 @@ int ata_dev_configure(struct ata_device *dev)
 			dma_dir_string = ", DMADIR";
 		}
 
+		if (ata_id_has_da(dev->id))
+			dev->flags |= ATA_DFLAG_DA;
+
 		/* print device info to dmesg */
 		if (ata_msg_drv(ap) && print_info)
 			ata_dev_info(dev,
@@ -4128,6 +4131,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 
 	/* Devices which aren't very happy with higher link speeds */
 	{ "WD My Book",			NULL,	ATA_HORKAGE_1_5_GBPS, },
+	{ "Seagate FreeAgent GoFlex",	NULL,	ATA_HORKAGE_1_5_GBPS, },
 
 	/*
 	 * Devices which choke on SETXFER.  Applies only if both the
@@ -5290,8 +5294,6 @@ static int ata_port_request_pm(struct ata_port *ap, pm_message_t mesg,
 	return rc;
 }
 
-#define to_ata_port(d) container_of(d, struct ata_port, tdev)
-
 static int ata_port_suspend_common(struct device *dev, pm_message_t mesg)
 {
 	struct ata_port *ap = to_ata_port(dev);
@@ -6053,9 +6055,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 	if (rc)
 		goto err_tadd;
 
-	/* associate with ACPI nodes */
-	ata_acpi_associate(host);
-
 	/* set cable, sata_spd_limit and report */
 	for (i = 0; i < host->n_ports; i++) {
 		struct ata_port *ap = host->ports[i];
@@ -6515,6 +6514,8 @@ static int __init ata_init(void)
 
 	ata_parse_force_param();
 
+	ata_acpi_register();
+
 	rc = ata_sff_init();
 	if (rc) {
 		kfree(ata_force_tbl);
@@ -6541,6 +6542,7 @@ static void __exit ata_exit(void)
 	ata_release_transport(ata_scsi_transport_template);
 	libata_transport_exit();
 	ata_sff_exit();
+	ata_acpi_unregister();
 	kfree(ata_force_tbl);
 }
 
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 77fc806..7d4535e 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -419,7 +419,7 @@ int ata_ering_map(struct ata_ering *ering,
 	return rc;
 }
 
-int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg)
+static int ata_ering_clear_cb(struct ata_ering_entry *ent, void *void_arg)
 {
 	ent->eflags |= ATA_EFLAG_OLD_ER;
 	return 0;
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 21b80c5..61c59ee 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -529,8 +529,6 @@ int sata_pmp_attach(struct ata_device *dev)
 	ata_for_each_link(tlink, ap, EDGE)
 		sata_link_init_spd(tlink);
 
-	ata_acpi_associate_sata_port(ap);
-
 	return 0;
 
  fail:
@@ -570,8 +568,6 @@ static void sata_pmp_detach(struct ata_device *dev)
 	ap->nr_pmp_links = 0;
 	link->pmp = 0;
 	spin_unlock_irqrestore(ap->lock, flags);
-
-	ata_acpi_associate_sata_port(ap);
 }
 
 /**
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2222635..8ec81ca 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3445,6 +3445,7 @@ void ata_scsi_scan_host(struct ata_port *ap, int sync)
 			if (!IS_ERR(sdev)) {
 				dev->sdev = sdev;
 				scsi_device_put(sdev);
+				ata_acpi_bind(dev);
 			} else {
 				dev->sdev = NULL;
 			}
@@ -3541,6 +3542,8 @@ static void ata_scsi_remove_dev(struct ata_device *dev)
 	mutex_lock(&ap->scsi_host->scan_mutex);
 	spin_lock_irqsave(ap->lock, flags);
 
+	ata_acpi_unbind(dev);
+
 	/* clearing dev->sdev is protected by host lock */
 	sdev = dev->sdev;
 	dev->sdev = NULL;
diff --git a/drivers/ata/libata-transport.c b/drivers/ata/libata-transport.c
index c341904..c04d393 100644
--- a/drivers/ata/libata-transport.c
+++ b/drivers/ata/libata-transport.c
@@ -232,7 +232,7 @@ static void ata_tport_release(struct device *dev)
  * Returns:
  *	%1 if the device represents a ATA Port, %0 else
  */
-int ata_is_port(const struct device *dev)
+static int ata_is_port(const struct device *dev)
 {
 	return dev->release == ata_tport_release;
 }
@@ -355,7 +355,7 @@ static void ata_tlink_release(struct device *dev)
  * Returns:
  *	%1 if the device represents a ATA link, %0 else
  */
-int ata_is_link(const struct device *dev)
+static int ata_is_link(const struct device *dev)
 {
 	return dev->release == ata_tlink_release;
 }
@@ -572,7 +572,7 @@ static void ata_tdev_release(struct device *dev)
  * Returns:
  *	%1 if the device represents a ATA device, %0 else
  */
-int ata_is_ata_dev(const struct device *dev)
+static int ata_is_ata_dev(const struct device *dev)
 {
 	return dev->release == ata_tdev_release;
 }
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index 9d0fd0b..50e4dff 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -107,21 +107,22 @@ extern const char *sata_spd_string(unsigned int spd);
 extern int ata_port_probe(struct ata_port *ap);
 extern void __ata_port_probe(struct ata_port *ap);
 
+#define to_ata_port(d) container_of(d, struct ata_port, tdev)
+
 /* libata-acpi.c */
 #ifdef CONFIG_ATA_ACPI
 extern unsigned int ata_acpi_gtf_filter;
-
-extern void ata_acpi_associate_sata_port(struct ata_port *ap);
-extern void ata_acpi_associate(struct ata_host *host);
 extern void ata_acpi_dissociate(struct ata_host *host);
 extern int ata_acpi_on_suspend(struct ata_port *ap);
 extern void ata_acpi_on_resume(struct ata_port *ap);
 extern int ata_acpi_on_devcfg(struct ata_device *dev);
 extern void ata_acpi_on_disable(struct ata_device *dev);
 extern void ata_acpi_set_state(struct ata_port *ap, pm_message_t state);
+extern int ata_acpi_register(void);
+extern void ata_acpi_unregister(void);
+extern void ata_acpi_bind(struct ata_device *dev);
+extern void ata_acpi_unbind(struct ata_device *dev);
 #else
-static inline void ata_acpi_associate_sata_port(struct ata_port *ap) { }
-static inline void ata_acpi_associate(struct ata_host *host) { }
 static inline void ata_acpi_dissociate(struct ata_host *host) { }
 static inline int ata_acpi_on_suspend(struct ata_port *ap) { return 0; }
 static inline void ata_acpi_on_resume(struct ata_port *ap) { }
@@ -129,6 +130,10 @@ static inline int ata_acpi_on_devcfg(struct ata_device *dev) { return 0; }
 static inline void ata_acpi_on_disable(struct ata_device *dev) { }
 static inline void ata_acpi_set_state(struct ata_port *ap,
 				      pm_message_t state) { }
+static inline int ata_acpi_register(void) { return 0; }
+static inline void ata_acpi_unregister(void) { }
+static inline void ata_acpi_bind(struct ata_device *dev) { }
+static inline void ata_acpi_unbind(struct ata_device *dev) { }
 #endif
 
 /* libata-scsi.c */
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 54145ed..09723b7 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -39,7 +39,7 @@ static int pacpi_pre_reset(struct ata_link *link, unsigned long deadline)
 {
 	struct ata_port *ap = link->ap;
 	struct pata_acpi *acpi = ap->private_data;
-	if (ap->acpi_handle == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
+	if (ata_ap_acpi_handle(ap) == NULL || ata_acpi_gtm(ap, &acpi->gtm) < 0)
 		return -ENODEV;
 
 	return ata_sff_prereset(link, deadline);
@@ -195,7 +195,7 @@ static int pacpi_port_start(struct ata_port *ap)
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 	struct pata_acpi *acpi;
 
-	if (ap->acpi_handle == NULL)
+	if (ata_ap_acpi_handle(ap) == NULL)
 		return -ENODEV;
 
 	acpi = ap->private_data = devm_kzalloc(&pdev->dev, sizeof(struct pata_acpi), GFP_KERNEL);
@@ -273,22 +273,10 @@ static struct pci_driver pacpi_pci_driver = {
 #endif
 };
 
-static int __init pacpi_init(void)
-{
-	return pci_register_driver(&pacpi_pci_driver);
-}
-
-static void __exit pacpi_exit(void)
-{
-	pci_unregister_driver(&pacpi_pci_driver);
-}
-
-module_init(pacpi_init);
-module_exit(pacpi_exit);
+module_pci_driver(pacpi_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for ATA in ACPI mode");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pacpi_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index dc6b5da..82a0892 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -632,21 +632,10 @@ static struct pci_driver amd_pci_driver = {
 #endif
 };
 
-static int __init amd_init(void)
-{
-	return pci_register_driver(&amd_pci_driver);
-}
-
-static void __exit amd_exit(void)
-{
-	pci_unregister_driver(&amd_pci_driver);
-}
+module_pci_driver(amd_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for AMD and Nvidia PATA IDE");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, amd);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(amd_init);
-module_exit(amd_exit);
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 4b8b22e..74b215c 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -451,18 +451,7 @@ static struct pci_driver artop_pci_driver = {
 #endif
 };
 
-static int __init artop_init(void)
-{
-	return pci_register_driver(&artop_pci_driver);
-}
-
-static void __exit artop_exit(void)
-{
-	pci_unregister_driver(&artop_pci_driver);
-}
-
-module_init(artop_init);
-module_exit(artop_exit);
+module_pci_driver(artop_pci_driver);
 
 MODULE_AUTHOR("Alan Cox, Bartlomiej Zolnierkiewicz");
 MODULE_DESCRIPTION("SCSI low-level driver for ARTOP PATA");
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index be1aa14..361c75c 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -289,22 +289,10 @@ static struct pci_driver atiixp_pci_driver = {
 #endif
 };
 
-static int __init atiixp_init(void)
-{
-	return pci_register_driver(&atiixp_pci_driver);
-}
-
-
-static void __exit atiixp_exit(void)
-{
-	pci_unregister_driver(&atiixp_pci_driver);
-}
+module_pci_driver(atiixp_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for ATI IXP200/300/400");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, atiixp);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(atiixp_init);
-module_exit(atiixp_exit);
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index 3cfabb2..041f50d 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -565,21 +565,10 @@ static struct pci_driver atp867x_driver = {
 #endif
 };
 
-static int __init atp867x_init(void)
-{
-	return pci_register_driver(&atp867x_driver);
-}
-
-static void __exit atp867x_exit(void)
-{
-	pci_unregister_driver(&atp867x_driver);
-}
+module_pci_driver(atp867x_driver);
 
 MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
 MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(atp867x_init);
-module_exit(atp867x_exit);
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 549d28d..504b98b 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -263,21 +263,10 @@ static struct pci_driver cmd640_pci_driver = {
 #endif
 };
 
-static int __init cmd640_init(void)
-{
-	return pci_register_driver(&cmd640_pci_driver);
-}
-
-static void __exit cmd640_exit(void)
-{
-	pci_unregister_driver(&cmd640_pci_driver);
-}
+module_pci_driver(cmd640_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for CMD640 PATA controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cmd640);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cmd640_init);
-module_exit(cmd640_exit);
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 1c17cd1..7ba0141 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -423,7 +423,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 			.port_ops = &cmd648_port_ops
 		}
 	};
-	const struct ata_port_info *ppi[] = { 
+	const struct ata_port_info *ppi[] = {
 		&cmd_info[id->driver_data],
 		&cmd_info[id->driver_data],
 		NULL
@@ -478,7 +478,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
 		ppi[0] = &ata_dummy_port_info;
-		
+
 	}
 	if (port_ok && !(reg & CNTRL_CH1)) {
 		dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
@@ -525,21 +525,10 @@ static struct pci_driver cmd64x_pci_driver = {
 #endif
 };
 
-static int __init cmd64x_init(void)
-{
-	return pci_register_driver(&cmd64x_pci_driver);
-}
-
-static void __exit cmd64x_exit(void)
-{
-	pci_unregister_driver(&cmd64x_pci_driver);
-}
+module_pci_driver(cmd64x_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cmd64x);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cmd64x_init);
-module_exit(cmd64x_exit);
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 9ddcddc..de74d80 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -302,22 +302,10 @@ static struct pci_driver cs5520_pci_driver = {
 #endif
 };
 
-static int __init cs5520_init(void)
-{
-	return pci_register_driver(&cs5520_pci_driver);
-}
-
-static void __exit cs5520_exit(void)
-{
-	pci_unregister_driver(&cs5520_pci_driver);
-}
+module_pci_driver(cs5520_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Cyrix CS5510/5520");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pata_cs5520);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cs5520_init);
-module_exit(cs5520_exit);
-
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index f792330..48389ae 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -363,21 +363,10 @@ static struct pci_driver cs5530_pci_driver = {
 #endif
 };
 
-static int __init cs5530_init(void)
-{
-	return pci_register_driver(&cs5530_pci_driver);
-}
-
-static void __exit cs5530_exit(void)
-{
-	pci_unregister_driver(&cs5530_pci_driver);
-}
+module_pci_driver(cs5530_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Cyrix/NS/AMD 5530");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cs5530);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cs5530_init);
-module_exit(cs5530_exit);
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index a0b4640..997e16a 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -207,21 +207,10 @@ static struct pci_driver cs5535_pci_driver = {
 #endif
 };
 
-static int __init cs5535_init(void)
-{
-	return pci_register_driver(&cs5535_pci_driver);
-}
-
-static void __exit cs5535_exit(void)
-{
-	pci_unregister_driver(&cs5535_pci_driver);
-}
+module_pci_driver(cs5535_pci_driver);
 
 MODULE_AUTHOR("Alan Cox, Jens Altmann, Wolfgan Zuleger, Alexander Kiausch");
 MODULE_DESCRIPTION("low-level driver for the NS/AMD 5535");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cs5535);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cs5535_init);
-module_exit(cs5535_exit);
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 7a402c7..dec1b6c 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -274,21 +274,10 @@ static struct pci_driver cs5536_pci_driver = {
 #endif
 };
 
-static int __init cs5536_init(void)
-{
-	return pci_register_driver(&cs5536_pci_driver);
-}
-
-static void __exit cs5536_exit(void)
-{
-	pci_unregister_driver(&cs5536_pci_driver);
-}
+module_pci_driver(cs5536_pci_driver);
 
 MODULE_AUTHOR("Martin K. Petersen");
 MODULE_DESCRIPTION("low-level driver for the CS5536 IDE controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cs5536);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cs5536_init);
-module_exit(cs5536_exit);
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 6d915b0..810bc99 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -158,23 +158,10 @@ static struct pci_driver cy82c693_pci_driver = {
 #endif
 };
 
-static int __init cy82c693_init(void)
-{
-	return pci_register_driver(&cy82c693_pci_driver);
-}
-
-
-static void __exit cy82c693_exit(void)
-{
-	pci_unregister_driver(&cy82c693_pci_driver);
-}
-
+module_pci_driver(cy82c693_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the CY82C693 PATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, cy82c693);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(cy82c693_init);
-module_exit(cy82c693_exit);
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index f0243ed..3c12fd7 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -295,22 +295,10 @@ static struct pci_driver efar_pci_driver = {
 #endif
 };
 
-static int __init efar_init(void)
-{
-	return pci_register_driver(&efar_pci_driver);
-}
-
-static void __exit efar_exit(void)
-{
-	pci_unregister_driver(&efar_pci_driver);
-}
-
-module_init(efar_init);
-module_exit(efar_exit);
+module_pci_driver(efar_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for EFAR PIIX clones");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, efar_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 42cffd3..4be884a 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -418,21 +418,10 @@ static struct pci_driver hpt36x_pci_driver = {
 #endif
 };
 
-static int __init hpt36x_init(void)
-{
-	return pci_register_driver(&hpt36x_pci_driver);
-}
-
-static void __exit hpt36x_exit(void)
-{
-	pci_unregister_driver(&hpt36x_pci_driver);
-}
+module_pci_driver(hpt36x_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT366/368");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, hpt36x);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(hpt36x_init);
-module_exit(hpt36x_exit);
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 9620636..a9d74ef 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -1058,21 +1058,10 @@ static struct pci_driver hpt37x_pci_driver = {
 	.remove		= ata_pci_remove_one
 };
 
-static int __init hpt37x_init(void)
-{
-	return pci_register_driver(&hpt37x_pci_driver);
-}
-
-static void __exit hpt37x_exit(void)
-{
-	pci_unregister_driver(&hpt37x_pci_driver);
-}
+module_pci_driver(hpt37x_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT37x/30x");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, hpt37x);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(hpt37x_init);
-module_exit(hpt37x_exit);
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 765f136..4be0398 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -621,21 +621,10 @@ static struct pci_driver hpt3x2n_pci_driver = {
 	.remove		= ata_pci_remove_one
 };
 
-static int __init hpt3x2n_init(void)
-{
-	return pci_register_driver(&hpt3x2n_pci_driver);
-}
-
-static void __exit hpt3x2n_exit(void)
-{
-	pci_unregister_driver(&hpt3x2n_pci_driver);
-}
+module_pci_driver(hpt3x2n_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT3xxN");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, hpt3x2n);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(hpt3x2n_init);
-module_exit(hpt3x2n_exit);
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index b3042da..76c9314 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -284,23 +284,10 @@ static struct pci_driver hpt3x3_pci_driver = {
 #endif
 };
 
-static int __init hpt3x3_init(void)
-{
-	return pci_register_driver(&hpt3x3_pci_driver);
-}
-
-
-static void __exit hpt3x3_exit(void)
-{
-	pci_unregister_driver(&hpt3x3_pci_driver);
-}
-
+module_pci_driver(hpt3x3_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the Highpoint HPT343/363");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, hpt3x3);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(hpt3x3_init);
-module_exit(hpt3x3_exit);
diff --git a/drivers/ata/pata_imx.c b/drivers/ata/pata_imx.c
index c5af97f..87bb05b 100644
--- a/drivers/ata/pata_imx.c
+++ b/drivers/ata/pata_imx.c
@@ -118,7 +118,7 @@ static int __devinit pata_imx_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);
 	}
 
-	clk_enable(priv->clk);
+	clk_prepare_enable(priv->clk);
 
 	host = ata_host_alloc(&pdev->dev, 1);
 	if (!host)
@@ -162,7 +162,7 @@ static int __devinit pata_imx_probe(struct platform_device *pdev)
 				&pata_imx_sht);
 
 free_priv:
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 	clk_put(priv->clk);
 	return -ENOMEM;
 }
@@ -176,7 +176,7 @@ static int __devexit pata_imx_remove(struct platform_device *pdev)
 
 	__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
 
-	clk_disable(priv->clk);
+	clk_disable_unprepare(priv->clk);
 	clk_put(priv->clk);
 
 	return 0;
@@ -194,7 +194,7 @@ static int pata_imx_suspend(struct device *dev)
 		__raw_writel(0, priv->host_regs + PATA_IMX_ATA_INT_EN);
 		priv->ata_ctl =
 			__raw_readl(priv->host_regs + PATA_IMX_ATA_CONTROL);
-		clk_disable(priv->clk);
+		clk_disable_unprepare(priv->clk);
 	}
 
 	return ret;
@@ -205,7 +205,7 @@ static int pata_imx_resume(struct device *dev)
 	struct ata_host *host = dev_get_drvdata(dev);
 	struct pata_imx_priv *priv = host->private_data;
 
-	clk_enable(priv->clk);
+	clk_prepare_enable(priv->clk);
 
 	__raw_writel(priv->ata_ctl, priv->host_regs + PATA_IMX_ATA_CONTROL);
 
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index cf9164d..2a8dd95 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -290,18 +290,7 @@ static struct pci_driver it8213_pci_driver = {
 #endif
 };
 
-static int __init it8213_init(void)
-{
-	return pci_register_driver(&it8213_pci_driver);
-}
-
-static void __exit it8213_exit(void)
-{
-	pci_unregister_driver(&it8213_pci_driver);
-}
-
-module_init(it8213_init);
-module_exit(it8213_exit);
+module_pci_driver(it8213_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for the ITE 8213");
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 62c5d00..9cc05d8 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -972,15 +972,7 @@ static struct pci_driver it821x_pci_driver = {
 #endif
 };
 
-static int __init it821x_init(void)
-{
-	return pci_register_driver(&it821x_pci_driver);
-}
-
-static void __exit it821x_exit(void)
-{
-	pci_unregister_driver(&it821x_pci_driver);
-}
+module_pci_driver(it821x_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for the IT8211/IT8212 IDE RAID controller");
@@ -988,9 +980,5 @@ MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, it821x);
 MODULE_VERSION(DRV_VERSION);
 
-
 module_param_named(noraid, it8212_noraid, int, S_IRUGO);
 MODULE_PARM_DESC(noraid, "Force card into bypass mode");
-
-module_init(it821x_init);
-module_exit(it821x_exit);
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index cb3babb..76e739b0 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -164,18 +164,7 @@ static struct pci_driver jmicron_pci_driver = {
 #endif
 };
 
-static int __init jmicron_init(void)
-{
-	return pci_register_driver(&jmicron_pci_driver);
-}
-
-static void __exit jmicron_exit(void)
-{
-	pci_unregister_driver(&jmicron_pci_driver);
-}
-
-module_init(jmicron_init);
-module_exit(jmicron_exit);
+module_pci_driver(jmicron_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for Jmicron PATA ports");
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 5d7f58a..a4f5e78 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -178,22 +178,10 @@ static struct pci_driver marvell_pci_driver = {
 #endif
 };
 
-static int __init marvell_init(void)
-{
-	return pci_register_driver(&marvell_pci_driver);
-}
-
-static void __exit marvell_exit(void)
-{
-	pci_unregister_driver(&marvell_pci_driver);
-}
-
-module_init(marvell_init);
-module_exit(marvell_exit);
+module_pci_driver(marvell_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for Marvell ATA in legacy mode");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, marvell_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 9dc16df..1f5f28b 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -230,21 +230,10 @@ static struct pci_driver mpiix_pci_driver = {
 #endif
 };
 
-static int __init mpiix_init(void)
-{
-	return pci_register_driver(&mpiix_pci_driver);
-}
-
-static void __exit mpiix_exit(void)
-{
-	pci_unregister_driver(&mpiix_pci_driver);
-}
+module_pci_driver(mpiix_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Intel MPIIX");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, mpiix);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(mpiix_init);
-module_exit(mpiix_exit);
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 9979a43..ad1a0fe 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -99,22 +99,10 @@ static struct pci_driver netcell_pci_driver = {
 #endif
 };
 
-static int __init netcell_init(void)
-{
-	return pci_register_driver(&netcell_pci_driver);
-}
-
-static void __exit netcell_exit(void)
-{
-	pci_unregister_driver(&netcell_pci_driver);
-}
-
-module_init(netcell_init);
-module_exit(netcell_exit);
+module_pci_driver(netcell_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for Netcell PATA RAID");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, netcell_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index e277a14..12010ed 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -190,21 +190,10 @@ static struct pci_driver ninja32_pci_driver = {
 #endif
 };
 
-static int __init ninja32_init(void)
-{
-	return pci_register_driver(&ninja32_pci_driver);
-}
-
-static void __exit ninja32_exit(void)
-{
-	pci_unregister_driver(&ninja32_pci_driver);
-}
+module_pci_driver(ninja32_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Ninja32 ATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ninja32);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(ninja32_init);
-module_exit(ninja32_exit);
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 31d5986..0c424da 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -168,21 +168,10 @@ static struct pci_driver ns87410_pci_driver = {
 #endif
 };
 
-static int __init ns87410_init(void)
-{
-	return pci_register_driver(&ns87410_pci_driver);
-}
-
-static void __exit ns87410_exit(void)
-{
-	pci_unregister_driver(&ns87410_pci_driver);
-}
+module_pci_driver(ns87410_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Nat Semi 87410");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ns87410);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(ns87410_init);
-module_exit(ns87410_exit);
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index f1d517b..6f6fa10 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -414,18 +414,7 @@ static struct pci_driver ns87415_pci_driver = {
 #endif
 };
 
-static int __init ns87415_init(void)
-{
-	return pci_register_driver(&ns87415_pci_driver);
-}
-
-static void __exit ns87415_exit(void)
-{
-	pci_unregister_driver(&ns87415_pci_driver);
-}
-
-module_init(ns87415_init);
-module_exit(ns87415_exit);
+module_pci_driver(ns87415_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("ATA low-level driver for NS87415 controllers");
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 98cdf50..d77b2e1 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -265,22 +265,10 @@ static struct pci_driver oldpiix_pci_driver = {
 #endif
 };
 
-static int __init oldpiix_init(void)
-{
-	return pci_register_driver(&oldpiix_pci_driver);
-}
-
-static void __exit oldpiix_exit(void)
-{
-	pci_unregister_driver(&oldpiix_pci_driver);
-}
-
-module_init(oldpiix_init);
-module_exit(oldpiix_exit);
+module_pci_driver(oldpiix_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for early PIIX series controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, oldpiix_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index accc033..4ea70cd 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -191,22 +191,10 @@ static struct pci_driver opti_pci_driver = {
 #endif
 };
 
-static int __init opti_init(void)
-{
-	return pci_register_driver(&opti_pci_driver);
-}
-
-static void __exit opti_exit(void)
-{
-	pci_unregister_driver(&opti_pci_driver);
-}
-
+module_pci_driver(opti_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Opti 621/621X");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, opti);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(opti_init);
-module_exit(opti_exit);
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 77cb914..78ede3f 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -447,21 +447,10 @@ static struct pci_driver optidma_pci_driver = {
 #endif
 };
 
-static int __init optidma_init(void)
-{
-	return pci_register_driver(&optidma_pci_driver);
-}
-
-static void __exit optidma_exit(void)
-{
-	pci_unregister_driver(&optidma_pci_driver);
-}
+module_pci_driver(optidma_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Opti Firestar/Firestar Plus");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, optidma);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(optidma_init);
-module_exit(optidma_exit);
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index a808ba0..958238d 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -170,7 +170,8 @@ static int pcmcia_check_one_config(struct pcmcia_device *pdev, void *priv_data)
 {
 	int *is_kme = priv_data;
 
-	if (!(pdev->resource[0]->flags & IO_DATA_PATH_WIDTH_8)) {
+	if ((pdev->resource[0]->flags & IO_DATA_PATH_WIDTH)
+	    != IO_DATA_PATH_WIDTH_8) {
 		pdev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
 		pdev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO;
 	}
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 7d63f24..c9399c8 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -784,21 +784,4 @@ static int pdc2027x_reinit_one(struct pci_dev *pdev)
 }
 #endif
 
-/**
- * pdc2027x_init - Called after this module is loaded into the kernel.
- */
-static int __init pdc2027x_init(void)
-{
-	return pci_register_driver(&pdc2027x_pci_driver);
-}
-
-/**
- * pdc2027x_exit - Called before this module unloaded from the kernel
- */
-static void __exit pdc2027x_exit(void)
-{
-	pci_unregister_driver(&pdc2027x_pci_driver);
-}
-
-module_init(pdc2027x_init);
-module_exit(pdc2027x_exit);
+module_pci_driver(pdc2027x_pci_driver);
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index c2ed586..c34fc50 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -384,21 +384,10 @@ static struct pci_driver pdc202xx_pci_driver = {
 #endif
 };
 
-static int __init pdc202xx_init(void)
-{
-	return pci_register_driver(&pdc202xx_pci_driver);
-}
-
-static void __exit pdc202xx_exit(void)
-{
-	pci_unregister_driver(&pdc202xx_pci_driver);
-}
+module_pci_driver(pdc202xx_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Promise 2024x and 20262-20267");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pdc202xx);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(pdc202xx_init);
-module_exit(pdc202xx_exit);
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index cb01bf9..2beb6b5 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -117,24 +117,10 @@ static struct pci_driver ata_tosh_pci_driver = {
 #endif
 };
 
-static int __init ata_tosh_init(void)
-{
-	return pci_register_driver(&ata_tosh_pci_driver);
-}
-
-
-static void __exit ata_tosh_exit(void)
-{
-	pci_unregister_driver(&ata_tosh_pci_driver);
-}
-
+module_pci_driver(ata_tosh_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("Low level driver for Toshiba Piccolo ATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, ata_tosh);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(ata_tosh_init);
-module_exit(ata_tosh_exit);
-
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index b2d3a2b..f582ba1 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -244,22 +244,10 @@ static struct pci_driver radisys_pci_driver = {
 #endif
 };
 
-static int __init radisys_init(void)
-{
-	return pci_register_driver(&radisys_pci_driver);
-}
-
-static void __exit radisys_exit(void)
-{
-	pci_unregister_driver(&radisys_pci_driver);
-}
-
-module_init(radisys_init);
-module_exit(radisys_exit);
+module_pci_driver(radisys_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for Radisys R82600 controllers");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, radisys_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index e6a2dd7..32a3499 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -394,18 +394,7 @@ static struct pci_driver rdc_pci_driver = {
 };
 
 
-static int __init rdc_init(void)
-{
-	return pci_register_driver(&rdc_pci_driver);
-}
-
-static void __exit rdc_exit(void)
-{
-	pci_unregister_driver(&rdc_pci_driver);
-}
-
-module_init(rdc_init);
-module_exit(rdc_exit);
+module_pci_driver(rdc_pci_driver);
 
 MODULE_AUTHOR("Alan Cox (based on ata_piix)");
 MODULE_DESCRIPTION("SCSI low-level driver for RDC PATA controllers");
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index aca321e..60f4de2 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -140,22 +140,10 @@ static struct pci_driver rz1000_pci_driver = {
 #endif
 };
 
-static int __init rz1000_init(void)
-{
-	return pci_register_driver(&rz1000_pci_driver);
-}
-
-static void __exit rz1000_exit(void)
-{
-	pci_unregister_driver(&rz1000_pci_driver);
-}
+module_pci_driver(rz1000_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pata_rz1000);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(rz1000_init);
-module_exit(rz1000_exit);
-
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index c0e603a..ce2f828 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -261,21 +261,10 @@ static struct pci_driver sc1200_pci_driver = {
 #endif
 };
 
-static int __init sc1200_init(void)
-{
-	return pci_register_driver(&sc1200_pci_driver);
-}
-
-static void __exit sc1200_exit(void)
-{
-	pci_unregister_driver(&sc1200_pci_driver);
-}
+module_pci_driver(sc1200_pci_driver);
 
 MODULE_AUTHOR("Alan Cox, Mark Lord");
 MODULE_DESCRIPTION("low-level driver for the NS/AMD SC1200");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sc1200);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(sc1200_init);
-module_exit(sc1200_exit);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index e265f83..f35f15f 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1103,26 +1103,7 @@ static struct pci_driver scc_pci_driver = {
 #endif
 };
 
-static int __init scc_init (void)
-{
-	int rc;
-
-	DPRINTK("pci_register_driver\n");
-	rc = pci_register_driver(&scc_pci_driver);
-	if (rc)
-		return rc;
-
-	DPRINTK("done\n");
-	return 0;
-}
-
-static void __exit scc_exit (void)
-{
-	pci_unregister_driver(&scc_pci_driver);
-}
-
-module_init(scc_init);
-module_exit(scc_exit);
+module_pci_driver(scc_pci_driver);
 
 MODULE_AUTHOR("Toshiba corp");
 MODULE_DESCRIPTION("SCSI low-level driver for Toshiba SCC PATA controller");
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index 7c78b99..db0d18c 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -179,15 +179,4 @@ static int __devinit sch_init_one(struct pci_dev *pdev,
 	return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
 }
 
-static int __init sch_init(void)
-{
-	return pci_register_driver(&sch_pci_driver);
-}
-
-static void __exit sch_exit(void)
-{
-	pci_unregister_driver(&sch_pci_driver);
-}
-
-module_init(sch_init);
-module_exit(sch_exit);
+module_pci_driver(sch_pci_driver);
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 71eaf38..f3febbc 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -475,21 +475,10 @@ static struct pci_driver serverworks_pci_driver = {
 #endif
 };
 
-static int __init serverworks_init(void)
-{
-	return pci_register_driver(&serverworks_pci_driver);
-}
-
-static void __exit serverworks_exit(void)
-{
-	pci_unregister_driver(&serverworks_pci_driver);
-}
+module_pci_driver(serverworks_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Serverworks OSB4/CSB5/CSB6");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, serverworks);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(serverworks_init);
-module_exit(serverworks_exit);
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index b92eacf..5cfdf94 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -437,21 +437,10 @@ static struct pci_driver sil680_pci_driver = {
 #endif
 };
 
-static int __init sil680_init(void)
-{
-	return pci_register_driver(&sil680_pci_driver);
-}
-
-static void __exit sil680_exit(void)
-{
-	pci_unregister_driver(&sil680_pci_driver);
-}
+module_pci_driver(sil680_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for SI680 PATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sil680);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(sil680_init);
-module_exit(sil680_exit);
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index b0edc7d..2d5ac13 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -906,22 +906,10 @@ static struct pci_driver sis_pci_driver = {
 #endif
 };
 
-static int __init sis_init(void)
-{
-	return pci_register_driver(&sis_pci_driver);
-}
-
-static void __exit sis_exit(void)
-{
-	pci_unregister_driver(&sis_pci_driver);
-}
-
-module_init(sis_init);
-module_exit(sis_exit);
+module_pci_driver(sis_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("SCSI low-level driver for SiS ATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sis_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 24cf200..738e000 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -372,21 +372,10 @@ static struct pci_driver sl82c105_pci_driver = {
 #endif
 };
 
-static int __init sl82c105_init(void)
-{
-	return pci_register_driver(&sl82c105_pci_driver);
-}
-
-static void __exit sl82c105_exit(void)
-{
-	pci_unregister_driver(&sl82c105_pci_driver);
-}
+module_pci_driver(sl82c105_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Sl82c105");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sl82c105);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(sl82c105_init);
-module_exit(sl82c105_exit);
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 28da1c6..c8e589d 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -240,21 +240,10 @@ static struct pci_driver triflex_pci_driver = {
 #endif
 };
 
-static int __init triflex_init(void)
-{
-	return pci_register_driver(&triflex_pci_driver);
-}
-
-static void __exit triflex_exit(void)
-{
-	pci_unregister_driver(&triflex_pci_driver);
-}
+module_pci_driver(triflex_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for Compaq Triflex");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, triflex);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(triflex_init);
-module_exit(triflex_exit);
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 255f336..8d2a9fd 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -711,21 +711,10 @@ static struct pci_driver via_pci_driver = {
 #endif
 };
 
-static int __init via_init(void)
-{
-	return pci_register_driver(&via_pci_driver);
-}
-
-static void __exit via_exit(void)
-{
-	pci_unregister_driver(&via_pci_driver);
-}
+module_pci_driver(via_pci_driver);
 
 MODULE_AUTHOR("Alan Cox");
 MODULE_DESCRIPTION("low-level driver for VIA PATA");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, via);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(via_init);
-module_exit(via_exit);
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index 04911d5..5053333 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -660,21 +660,10 @@ static int adma_ata_init_one(struct pci_dev *pdev,
 				 &adma_ata_sht);
 }
 
-static int __init adma_ata_init(void)
-{
-	return pci_register_driver(&adma_ata_pci_driver);
-}
-
-static void __exit adma_ata_exit(void)
-{
-	pci_unregister_driver(&adma_ata_pci_driver);
-}
+module_pci_driver(adma_ata_pci_driver);
 
 MODULE_AUTHOR("Mark Lord");
 MODULE_DESCRIPTION("Pacific Digital Corporation ADMA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, adma_ata_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(adma_ata_init);
-module_exit(adma_ata_exit);
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
old mode 100644
new mode 100755
index 69f7cde..937aeb3
--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -158,6 +158,7 @@ enum {
 /* Assign HW handshaking interface (x) to destination / source peripheral */
 #define	DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
 #define	DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
+#define	DMA_CFG_HW_CH_PRIOR(int_num) (((int_num) & 0xF) << 5)
 #define	DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
 
 /*
@@ -318,6 +319,7 @@ struct sata_dwc_host_priv {
 	u32	dma_interrupt_count;
 	struct	ahb_dma_regs	*sata_dma_regs;
 	struct	device	*dwc_dev;
+	int	dma_channel;
 };
 struct sata_dwc_host_priv host_pvt;
 /*
@@ -437,15 +439,12 @@ static  void clear_chan_interrupts(int c)
  */
 static int dma_request_channel(void)
 {
-	int i;
-
-	for (i = 0; i < DMA_NUM_CHANS; i++) {
-		if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &\
-			DMA_CHANNEL(i)))
-			return i;
-	}
-	dev_err(host_pvt.dwc_dev, "%s NO channel chan_en: 0x%08x\n", __func__,
-		in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)));
+	/* Check if the channel is not currently in use */
+	if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &
+		DMA_CHANNEL(host_pvt.dma_channel)))
+		return host_pvt.dma_channel;
+	dev_err(host_pvt.dwc_dev, "%s Channel %d is currently in use\n",
+		__func__, host_pvt.dma_channel);
 	return -1;
 }
 
@@ -481,7 +480,8 @@ static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
 	dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
 		tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
 
-	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+	chan = host_pvt.dma_channel;
+	if (chan >= 0) {
 		/* Check for end-of-transfer interrupt. */
 		if (tfr_reg & DMA_CHANNEL(chan)) {
 			/*
@@ -534,9 +534,9 @@ static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
 static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
 {
 	int retval = 0;
-	int chan;
+	int chan = host_pvt.dma_channel;
 
-	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+	if (chan >= 0) {
 		/* Unmask error interrupt */
 		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
 			 DMA_ENABLE_CHAN(chan));
@@ -575,7 +575,10 @@ static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
 	int fis_len = 0;
 	dma_addr_t next_llp;
 	int bl;
+	int sms_val, dms_val;
 
+	sms_val = 0;
+	dms_val = 1 + host_pvt.dma_channel;
 	dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x"
 		" dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli,
 		(u32)dmadr_addr);
@@ -635,8 +638,8 @@ static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
 
 				lli[idx].ctl.low = cpu_to_le32(
 					DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
-					DMA_CTL_SMS(0) |
-					DMA_CTL_DMS(1) |
+					DMA_CTL_SMS(sms_val) |
+					DMA_CTL_DMS(dms_val) |
 					DMA_CTL_SRC_MSIZE(bl) |
 					DMA_CTL_DST_MSIZE(bl) |
 					DMA_CTL_SINC_NOCHANGE |
@@ -651,8 +654,8 @@ static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
 
 				lli[idx].ctl.low = cpu_to_le32(
 					DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
-					DMA_CTL_SMS(1) |
-					DMA_CTL_DMS(0) |
+					DMA_CTL_SMS(dms_val) |
+					DMA_CTL_DMS(sms_val) |
 					DMA_CTL_SRC_MSIZE(bl) |
 					DMA_CTL_DST_MSIZE(bl) |
 					DMA_CTL_DINC_NOCHANGE |
@@ -744,8 +747,10 @@ static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
 
 	/* Program the CFG register. */
 	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
+		 DMA_CFG_HW_HS_SRC(dma_ch) | DMA_CFG_HW_HS_DEST(dma_ch) |
 		 DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
-	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), 0);
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low),
+		 DMA_CFG_HW_CH_PRIOR(dma_ch));
 
 	/* Program the address of the linked list */
 	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
@@ -1581,10 +1586,31 @@ static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
 
 static void sata_dwc_error_handler(struct ata_port *ap)
 {
-	ap->link.flags |= ATA_LFLAG_NO_HRST;
 	ata_sff_error_handler(ap);
 }
 
+int sata_dwc_hardreset(struct ata_link *link, unsigned int *class,
+			unsigned long deadline)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(link->ap);
+	int ret;
+
+	ret = sata_sff_hardreset(link, class, deadline);
+
+	sata_dwc_enable_interrupts(hsdev);
+
+	/* Reconfigure the DMA control register */
+	out_le32(&hsdev->sata_dwc_regs->dmacr,
+		 SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+	/* Reconfigure the DMA Burst Transaction Size register */
+	out_le32(&hsdev->sata_dwc_regs->dbtsr,
+		 SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+		 SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
+
+	return ret;
+}
+
 /*
  * scsi mid-layer and libata interface structures
  */
@@ -1604,6 +1630,7 @@ static struct ata_port_operations sata_dwc_ops = {
 	.inherits		= &ata_sff_port_ops,
 
 	.error_handler		= sata_dwc_error_handler,
+	.hardreset		= sata_dwc_hardreset,
 
 	.qc_prep		= sata_dwc_qc_prep,
 	.qc_issue		= sata_dwc_qc_issue,
@@ -1638,6 +1665,8 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 	struct ata_host *host;
 	struct ata_port_info pi = sata_dwc_port_info[0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
+	struct device_node *np = ofdev->dev.of_node;
+	u32 dma_chan;
 
 	/* Allocate DWC SATA device */
 	hsdev = kzalloc(sizeof(*hsdev), GFP_KERNEL);
@@ -1647,6 +1676,13 @@ static int sata_dwc_probe(struct platform_device *ofdev)
 		goto error;
 	}
 
+	if (of_property_read_u32(np, "dma-channel", &dma_chan)) {
+		dev_warn(&ofdev->dev, "no dma-channel property set."
+			 " Use channel 0\n");
+		dma_chan = 0;
+	}
+	host_pvt.dma_channel = dma_chan;
+
 	/* Ioremap SATA registers */
 	base = of_iomap(ofdev->dev.of_node, 0);
 	if (!base) {
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 5c7d70c..dc35f4d 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -894,21 +894,10 @@ static struct pci_driver inic_pci_driver = {
 	.remove		= ata_pci_remove_one,
 };
 
-static int __init inic_init(void)
-{
-	return pci_register_driver(&inic_pci_driver);
-}
-
-static void __exit inic_exit(void)
-{
-	pci_unregister_driver(&inic_pci_driver);
-}
+module_pci_driver(inic_pci_driver);
 
 MODULE_AUTHOR("Tejun Heo");
 MODULE_DESCRIPTION("low-level driver for Initio 162x SATA");
 MODULE_LICENSE("GPL v2");
 MODULE_DEVICE_TABLE(pci, inic_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(inic_init);
-module_exit(inic_exit);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 55d6179..85ee499 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -2510,22 +2510,11 @@ static void nv_adma_host_stop(struct ata_host *host)
 	nv_ck804_host_stop(host);
 }
 
-static int __init nv_init(void)
-{
-	return pci_register_driver(&nv_pci_driver);
-}
-
-static void __exit nv_exit(void)
-{
-	pci_unregister_driver(&nv_pci_driver);
-}
+module_pci_driver(nv_pci_driver);
 
-module_init(nv_init);
-module_exit(nv_exit);
 module_param_named(adma, adma_enabled, bool, 0444);
 MODULE_PARM_DESC(adma, "Enable use of ADMA (Default: false)");
 module_param_named(swncq, swncq_enabled, bool, 0444);
 MODULE_PARM_DESC(swncq, "Enable use of SWNCQ (Default: true)");
 module_param_named(msi, msi_enabled, bool, 0444);
 MODULE_PARM_DESC(msi, "Enable use of MSI (Default: false)");
-
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 000fcc9..489c817 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -1249,21 +1249,10 @@ static int pdc_ata_init_one(struct pci_dev *pdev,
 				 &pdc_ata_sht);
 }
 
-static int __init pdc_ata_init(void)
-{
-	return pci_register_driver(&pdc_ata_pci_driver);
-}
-
-static void __exit pdc_ata_exit(void)
-{
-	pci_unregister_driver(&pdc_ata_pci_driver);
-}
+module_pci_driver(pdc_ata_pci_driver);
 
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(pdc_ata_init);
-module_exit(pdc_ata_exit);
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index 9d1a47b..3b0dd57 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -635,21 +635,10 @@ static int qs_ata_init_one(struct pci_dev *pdev,
 				 &qs_ata_sht);
 }
 
-static int __init qs_ata_init(void)
-{
-	return pci_register_driver(&qs_ata_pci_driver);
-}
-
-static void __exit qs_ata_exit(void)
-{
-	pci_unregister_driver(&qs_ata_pci_driver);
-}
+module_pci_driver(qs_ata_pci_driver);
 
 MODULE_AUTHOR("Mark Lord");
 MODULE_DESCRIPTION("Pacific Digital Corporation QStor SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, qs_ata_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(qs_ata_init);
-module_exit(qs_ata_exit);
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 9dfb40b..a7b3167 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -819,16 +819,4 @@ static int sil_pci_device_resume(struct pci_dev *pdev)
 }
 #endif
 
-static int __init sil_init(void)
-{
-	return pci_register_driver(&sil_pci_driver);
-}
-
-static void __exit sil_exit(void)
-{
-	pci_unregister_driver(&sil_pci_driver);
-}
-
-
-module_init(sil_init);
-module_exit(sil_exit);
+module_pci_driver(sil_pci_driver);
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index e7e610a..a5f2a56 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -1382,20 +1382,9 @@ static int sil24_port_resume(struct ata_port *ap)
 }
 #endif
 
-static int __init sil24_init(void)
-{
-	return pci_register_driver(&sil24_pci_driver);
-}
-
-static void __exit sil24_exit(void)
-{
-	pci_unregister_driver(&sil24_pci_driver);
-}
+module_pci_driver(sil24_pci_driver);
 
 MODULE_AUTHOR("Tejun Heo");
 MODULE_DESCRIPTION("Silicon Image 3124/3132 SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, sil24_pci_tbl);
-
-module_init(sil24_init);
-module_exit(sil24_exit);
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 95ec435..fe3ca09 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -308,15 +308,4 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				 IRQF_SHARED, &sis_sht);
 }
 
-static int __init sis_init(void)
-{
-	return pci_register_driver(&sis_pci_driver);
-}
-
-static void __exit sis_exit(void)
-{
-	pci_unregister_driver(&sis_pci_driver);
-}
-
-module_init(sis_init);
-module_exit(sis_exit);
+module_pci_driver(sis_pci_driver);
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index c646118..44a4256 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -525,21 +525,10 @@ static struct pci_driver k2_sata_pci_driver = {
 	.remove			= ata_pci_remove_one,
 };
 
-static int __init k2_sata_init(void)
-{
-	return pci_register_driver(&k2_sata_pci_driver);
-}
-
-static void __exit k2_sata_exit(void)
-{
-	pci_unregister_driver(&k2_sata_pci_driver);
-}
+module_pci_driver(k2_sata_pci_driver);
 
 MODULE_AUTHOR("Benjamin Herrenschmidt");
 MODULE_DESCRIPTION("low-level driver for K2 SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, k2_sata_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(k2_sata_init);
-module_exit(k2_sata_exit);
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index cdaebbe..1226055 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -1498,24 +1498,10 @@ static int pdc_sata_init_one(struct pci_dev *pdev,
 				 IRQF_SHARED, &pdc_sata_sht);
 }
 
-
-static int __init pdc_sata_init(void)
-{
-	return pci_register_driver(&pdc_sata_pci_driver);
-}
-
-
-static void __exit pdc_sata_exit(void)
-{
-	pci_unregister_driver(&pdc_sata_pci_driver);
-}
-
+module_pci_driver(pdc_sata_pci_driver);
 
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Promise SATA low-level driver");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, pdc_sata_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(pdc_sata_init);
-module_exit(pdc_sata_exit);
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index b54ebfc..6d64891 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -243,16 +243,4 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				 IRQF_SHARED, &uli_sht);
 }
 
-static int __init uli_init(void)
-{
-	return pci_register_driver(&uli_pci_driver);
-}
-
-static void __exit uli_exit(void)
-{
-	pci_unregister_driver(&uli_pci_driver);
-}
-
-
-module_init(uli_init);
-module_exit(uli_exit);
+module_pci_driver(uli_pci_driver);
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index f93e43b..5913ea9 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -655,15 +655,4 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 				 IRQF_SHARED, &svia_sht);
 }
 
-static int __init svia_init(void)
-{
-	return pci_register_driver(&svia_pci_driver);
-}
-
-static void __exit svia_exit(void)
-{
-	pci_unregister_driver(&svia_pci_driver);
-}
-
-module_init(svia_init);
-module_exit(svia_exit);
+module_pci_driver(svia_pci_driver);
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 6135a52..e8cf88ba 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -436,21 +436,10 @@ static struct pci_driver vsc_sata_pci_driver = {
 	.remove			= ata_pci_remove_one,
 };
 
-static int __init vsc_sata_init(void)
-{
-	return pci_register_driver(&vsc_sata_pci_driver);
-}
-
-static void __exit vsc_sata_exit(void)
-{
-	pci_unregister_driver(&vsc_sata_pci_driver);
-}
+module_pci_driver(vsc_sata_pci_driver);
 
 MODULE_AUTHOR("Jeremy Higdon");
 MODULE_DESCRIPTION("low-level driver for Vitesse VSC7174 SATA controller");
 MODULE_LICENSE("GPL");
 MODULE_DEVICE_TABLE(pci, vsc_sata_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
-
-module_init(vsc_sata_init);
-module_exit(vsc_sata_exit);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index b583277..ffd7773 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -68,6 +68,23 @@ static struct scsi_host_sg_pool scsi_sg_pools[] = {
 
 struct kmem_cache *scsi_sdb_cache;
 
+#ifdef CONFIG_ACPI
+#include <acpi/acpi_bus.h>
+
+int scsi_register_acpi_bus_type(struct acpi_bus_type *bus)
+{
+        bus->bus = &scsi_bus_type;
+        return register_acpi_bus_type(bus);
+}
+EXPORT_SYMBOL_GPL(scsi_register_acpi_bus_type);
+
+void scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus)
+{
+	unregister_acpi_bus_type(bus);
+}
+EXPORT_SYMBOL_GPL(scsi_unregister_acpi_bus_type);
+#endif
+
 /*
  * When to reinvoke queueing after a resource shortage. It's 3 msecs to
  * not change behaviour from the previous unplug mechanism, experimentation
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 32df2b6..5713d3a 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -578,6 +578,7 @@ static inline int ata_is_data(u8 prot)
 	  ((u64) (id)[(n) + 0]) )
 
 #define ata_id_cdb_intr(id)	(((id)[ATA_ID_CONFIG] & 0x60) == 0x20)
+#define ata_id_has_da(id)	((id)[77] & (1 << 4))
 
 static inline bool ata_id_has_hipm(const u16 *id)
 {
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 53da442..64f90e1 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -161,6 +161,8 @@ enum {
 	ATA_DFLAG_DETACH	= (1 << 24),
 	ATA_DFLAG_DETACHED	= (1 << 25),
 
+	ATA_DFLAG_DA		= (1 << 26), /* device supports Device Attention */
+
 	ATA_DEV_UNKNOWN		= 0,	/* unknown device */
 	ATA_DEV_ATA		= 1,	/* ATA device */
 	ATA_DEV_ATA_UNSUP	= 2,	/* ATA device (unsupported) */
@@ -545,9 +547,6 @@ struct ata_host {
 	struct mutex		eh_mutex;
 	struct task_struct	*eh_owner;
 
-#ifdef CONFIG_ATA_ACPI
-	acpi_handle		acpi_handle;
-#endif
 	struct ata_port		*simplex_claimed;	/* channel owning the DMA */
 	struct ata_port		*ports[0];
 };
@@ -615,7 +614,6 @@ struct ata_device {
 	struct scsi_device	*sdev;		/* attached SCSI device */
 	void			*private_data;
 #ifdef CONFIG_ATA_ACPI
-	acpi_handle		acpi_handle;
 	union acpi_object	*gtf_cache;
 	unsigned int		gtf_filter;
 #endif
@@ -797,7 +795,6 @@ struct ata_port {
 	void			*private_data;
 
 #ifdef CONFIG_ATA_ACPI
-	acpi_handle		acpi_handle;
 	struct ata_acpi_gtm	__acpi_init_gtm; /* use ata_acpi_init_gtm() */
 #endif
 	/* owned by EH */
@@ -1116,6 +1113,8 @@ int ata_acpi_stm(struct ata_port *ap, const struct ata_acpi_gtm *stm);
 int ata_acpi_gtm(struct ata_port *ap, struct ata_acpi_gtm *stm);
 unsigned long ata_acpi_gtm_xfermask(struct ata_device *dev,
 				    const struct ata_acpi_gtm *gtm);
+acpi_handle ata_ap_acpi_handle(struct ata_port *ap);
+acpi_handle ata_dev_acpi_handle(struct ata_device *dev);
 int ata_acpi_cbl_80wire(struct ata_port *ap, const struct ata_acpi_gtm *gtm);
 #else
 static inline const struct ata_acpi_gtm *ata_acpi_init_gtm(struct ata_port *ap)
diff --git a/include/scsi/scsi.h b/include/scsi/scsi.h
index c6f0974..66216c1 100644
--- a/include/scsi/scsi.h
+++ b/include/scsi/scsi.h
@@ -216,6 +216,16 @@ scsi_command_size(const unsigned char *cmnd)
 		scsi_varlen_cdb_length(cmnd) : COMMAND_SIZE(cmnd[0]);
 }
 
+#ifdef CONFIG_ACPI
+struct acpi_bus_type;
+
+extern int
+scsi_register_acpi_bus_type(struct acpi_bus_type *bus);
+
+extern void
+scsi_unregister_acpi_bus_type(struct acpi_bus_type *bus);
+#endif
+
 /*
  *  SCSI Architecture Model (SAM) Status codes. Taken from SAM-3 draft
  *  T10/1561-D Revision 4 Draft dated 7th November 2002.
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 7539f52..9895f69 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -154,6 +154,7 @@ struct scsi_device {
 	unsigned no_read_capacity_16:1; /* Avoid READ_CAPACITY_16 cmds */
 	unsigned try_rc_10_first:1;	/* Try READ_CAPACACITY_10 first */
 	unsigned is_visible:1;	/* is the device visible in sysfs */
+	unsigned can_power_off:1; /* Device supports runtime power off */
 	unsigned wce_default_on:1;	/* Cache is ON by default */
 
 	DECLARE_BITMAP(supported_events, SDEV_EVT_MAXBITS); /* supported events */

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2011-01-28  8:29 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2011-01-28  8:29 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


1. DMA alignment fix for PIO + ATAPI.

2. various other minor fixes and PCI IDs

3. And a couple pata_hpt* cosmetics.

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ahci.c         |    3 +
 drivers/ata/libata-core.c  |    1 +
 drivers/ata/libata-scsi.c  |   24 +++++++--
 drivers/ata/pata_hpt366.c  |    6 +-
 drivers/ata/pata_hpt37x.c  |  112 +++++++++++++++++++++-----------------------
 drivers/ata/pata_hpt3x2n.c |   12 ++---
 drivers/ata/pata_mpc52xx.c |    2 +-
 7 files changed, 85 insertions(+), 75 deletions(-)

Anssi Hannula (1):
      ahci: add HFLAG_YES_FBS and apply it to 88SE9128

Francesco Antonacci (1):
      libata: DVR-212D can't do SETXFER DVD-RW DVR-212D

Sergei Shtylyov (4):
      pata_hpt{366|37x}: use pr_warning(...) instead of printk(KERN_WARNING ...)
      pata_hpt{37x|3x2n}: use pr_*(DRV_NAME ...) instead of printk(KERN_* ...)
      pata_hpt37x: fold 'if' statement into 'switch'
      pata_hpt37x: inherit prereset() method for HPT374

Seth Heasley (1):
      ahci: AHCI mode SATA patch for Intel DH89xxCC DeviceIDs

Tejun Heo (2):
      pata_mpc52xx: inherit from ata_bmdma_port_ops
      libata: set queue DMA alignment to sector size for ATAPI too

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 3288263..b8d96ce 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -260,6 +260,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x1d02), board_ahci }, /* PBG AHCI */
 	{ PCI_VDEVICE(INTEL, 0x1d04), board_ahci }, /* PBG RAID */
 	{ PCI_VDEVICE(INTEL, 0x1d06), board_ahci }, /* PBG RAID */
+	{ PCI_VDEVICE(INTEL, 0x2323), board_ahci }, /* DH89xxCC AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -379,6 +380,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
 	{ PCI_VDEVICE(MARVELL, 0x6121), board_ahci_mv },	/* 6121 */
 	{ PCI_DEVICE(0x1b4b, 0x9123),
+	  .class = PCI_CLASS_STORAGE_SATA_AHCI,
+	  .class_mask = 0xffffff,
 	  .driver_data = board_ahci_yes_fbs },			/* 88se9128 */
 
 	/* Promise */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index a31fe96..d4e52e2 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4138,6 +4138,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	 * device and controller are SATA.
 	 */
 	{ "PIONEER DVD-RW  DVRTD08",	"1.00",	ATA_HORKAGE_NOSETXFER },
+	{ "PIONEER DVD-RW  DVR-212D",	"1.28", ATA_HORKAGE_NOSETXFER },
 
 	/* End Marker */
 	{ }
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 5defc74..600f635 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -1099,9 +1099,9 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
 		struct request_queue *q = sdev->request_queue;
 		void *buf;
 
-		/* set the min alignment and padding */
-		blk_queue_update_dma_alignment(sdev->request_queue,
-					       ATA_DMA_PAD_SZ - 1);
+		sdev->sector_size = ATA_SECT_SIZE;
+
+		/* set DMA padding */
 		blk_queue_update_dma_pad(sdev->request_queue,
 					 ATA_DMA_PAD_SZ - 1);
 
@@ -1115,13 +1115,25 @@ static int ata_scsi_dev_config(struct scsi_device *sdev,
 
 		blk_queue_dma_drain(q, atapi_drain_needed, buf, ATAPI_MAX_DRAIN);
 	} else {
-		/* ATA devices must be sector aligned */
 		sdev->sector_size = ata_id_logical_sector_size(dev->id);
-		blk_queue_update_dma_alignment(sdev->request_queue,
-					       sdev->sector_size - 1);
 		sdev->manage_start_stop = 1;
 	}
 
+	/*
+	 * ata_pio_sectors() expects buffer for each sector to not cross
+	 * page boundary.  Enforce it by requiring buffers to be sector
+	 * aligned, which works iff sector_size is not larger than
+	 * PAGE_SIZE.  ATAPI devices also need the alignment as
+	 * IDENTIFY_PACKET is executed as ATA_PROT_PIO.
+	 */
+	if (sdev->sector_size > PAGE_SIZE)
+		ata_dev_printk(dev, KERN_WARNING,
+			"sector_size=%u > PAGE_SIZE, PIO may malfunction\n",
+			sdev->sector_size);
+
+	blk_queue_update_dma_alignment(sdev->request_queue,
+				       sdev->sector_size - 1);
+
 	if (dev->flags & ATA_DFLAG_AN)
 		set_bit(SDEV_EVT_MEDIA_CHANGE, sdev->supported_events);
 
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index d7e57db..538ec38 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.6.9"
+#define DRV_VERSION	"0.6.10"
 
 struct hpt_clock {
 	u8	xfer_mode;
@@ -160,8 +160,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
 
 	while (list[i] != NULL) {
 		if (!strcmp(list[i], model_num)) {
-			printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
-				modestr, list[i]);
+			pr_warning(DRV_NAME ": %s is not supported for %s.\n",
+				   modestr, list[i]);
 			return 1;
 		}
 		i++;
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index efdd18b..4c5b518 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.6.18"
+#define DRV_VERSION	"0.6.22"
 
 struct hpt_clock {
 	u8	xfer_speed;
@@ -229,8 +229,8 @@ static int hpt_dma_blacklisted(const struct ata_device *dev, char *modestr,
 
 	while (list[i] != NULL) {
 		if (!strcmp(list[i], model_num)) {
-			printk(KERN_WARNING DRV_NAME ": %s is not supported for %s.\n",
-				modestr, list[i]);
+			pr_warning(DRV_NAME ": %s is not supported for %s.\n",
+				   modestr, list[i]);
 			return 1;
 		}
 		i++;
@@ -642,7 +642,6 @@ static struct ata_port_operations hpt372_port_ops = {
 static struct ata_port_operations hpt374_fn1_port_ops = {
 	.inherits	= &hpt372_port_ops,
 	.cable_detect	= hpt374_fn1_cable_detect,
-	.prereset	= hpt37x_pre_reset,
 };
 
 /**
@@ -803,7 +802,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt302_port_ops
 	};
-	/* HPT374 - UDMA100, function 1 uses different prereset method */
+	/* HPT374 - UDMA100, function 1 uses different cable_detect method */
 	static const struct ata_port_info info_hpt374_fn0 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = ATA_PIO4,
@@ -838,7 +837,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
-	if (dev->device == PCI_DEVICE_ID_TTI_HPT366) {
+	switch (dev->device) {
+	case PCI_DEVICE_ID_TTI_HPT366:
 		/* May be a later chip in disguise. Check */
 		/* Older chips are in the HPT366 driver. Ignore them */
 		if (rev < 3)
@@ -863,54 +863,50 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			chip_table = &hpt372;
 			break;
 		default:
-			printk(KERN_ERR "pata_hpt37x: Unknown HPT366 subtype, "
+			pr_err(DRV_NAME ": Unknown HPT366 subtype, "
 			       "please report (%d).\n", rev);
 			return -ENODEV;
 		}
-	} else {
-		switch (dev->device) {
-		case PCI_DEVICE_ID_TTI_HPT372:
-			/* 372N if rev >= 2 */
-			if (rev >= 2)
-				return -ENODEV;
-			ppi[0] = &info_hpt372;
-			chip_table = &hpt372a;
-			break;
-		case PCI_DEVICE_ID_TTI_HPT302:
-			/* 302N if rev > 1 */
-			if (rev > 1)
-				return -ENODEV;
-			ppi[0] = &info_hpt302;
-			/* Check this */
-			chip_table = &hpt302;
-			break;
-		case PCI_DEVICE_ID_TTI_HPT371:
-			if (rev > 1)
-				return -ENODEV;
-			ppi[0] = &info_hpt302;
-			chip_table = &hpt371;
-			/*
-			 * Single channel device, master is not present
-			 * but the BIOS (or us for non x86) must mark it
-			 * absent
-			 */
-			pci_read_config_byte(dev, 0x50, &mcr1);
-			mcr1 &= ~0x04;
-			pci_write_config_byte(dev, 0x50, mcr1);
-			break;
-		case PCI_DEVICE_ID_TTI_HPT374:
-			chip_table = &hpt374;
-			if (!(PCI_FUNC(dev->devfn) & 1))
-				*ppi = &info_hpt374_fn0;
-			else
-				*ppi = &info_hpt374_fn1;
-			break;
-		default:
-			printk(KERN_ERR
-			       "pata_hpt37x: PCI table is bogus, please report (%d).\n",
-			       dev->device);
-				return -ENODEV;
-		}
+		break;
+	case PCI_DEVICE_ID_TTI_HPT372:
+		/* 372N if rev >= 2 */
+		if (rev >= 2)
+			return -ENODEV;
+		ppi[0] = &info_hpt372;
+		chip_table = &hpt372a;
+		break;
+	case PCI_DEVICE_ID_TTI_HPT302:
+		/* 302N if rev > 1 */
+		if (rev > 1)
+			return -ENODEV;
+		ppi[0] = &info_hpt302;
+		/* Check this */
+		chip_table = &hpt302;
+		break;
+	case PCI_DEVICE_ID_TTI_HPT371:
+		if (rev > 1)
+			return -ENODEV;
+		ppi[0] = &info_hpt302;
+		chip_table = &hpt371;
+		/*
+		 * Single channel device, master is not present but the BIOS
+		 * (or us for non x86) must mark it absent
+		 */
+		pci_read_config_byte(dev, 0x50, &mcr1);
+		mcr1 &= ~0x04;
+		pci_write_config_byte(dev, 0x50, mcr1);
+		break;
+	case PCI_DEVICE_ID_TTI_HPT374:
+		chip_table = &hpt374;
+		if (!(PCI_FUNC(dev->devfn) & 1))
+			*ppi = &info_hpt374_fn0;
+		else
+			*ppi = &info_hpt374_fn1;
+		break;
+	default:
+		pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
+		       dev->device);
+		return -ENODEV;
 	}
 	/* Ok so this is a chip we support */
 
@@ -957,8 +953,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		u8 sr;
 		u32 total = 0;
 
-		printk(KERN_WARNING
-		       "pata_hpt37x: BIOS has not set timing clocks.\n");
+		pr_warning(DRV_NAME ": BIOS has not set timing clocks.\n");
 
 		/* This is the process the HPT371 BIOS is reported to use */
 		for (i = 0; i < 128; i++) {
@@ -1014,7 +1009,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 					       (f_high << 16) | f_low | 0x100);
 		}
 		if (adjust == 8) {
-			printk(KERN_ERR "pata_hpt37x: DPLL did not stabilize!\n");
+			pr_err(DRV_NAME ": DPLL did not stabilize!\n");
 			return -ENODEV;
 		}
 		if (dpll == 3)
@@ -1022,8 +1017,8 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		else
 			private_data = (void *)hpt37x_timings_50;
 
-		printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using %dMHz DPLL.\n",
-		       MHz[clock_slot], MHz[dpll]);
+		pr_info(DRV_NAME ": bus clock %dMHz, using %dMHz DPLL.\n",
+			MHz[clock_slot], MHz[dpll]);
 	} else {
 		private_data = (void *)chip_table->clocks[clock_slot];
 		/*
@@ -1036,8 +1031,9 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			ppi[0] = &info_hpt370_33;
 		if (clock_slot < 2 && ppi[0] == &info_hpt370a)
 			ppi[0] = &info_hpt370a_33;
-		printk(KERN_INFO "pata_hpt37x: %s using %dMHz bus clock.\n",
-		       chip_table->name, MHz[clock_slot]);
+
+		pr_info(DRV_NAME ": %s using %dMHz bus clock.\n",
+			chip_table->name, MHz[clock_slot]);
 	}
 
 	/* Now kick off ATA set up */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d2239bb..eca68ca 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.13"
+#define DRV_VERSION	"0.3.14"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -418,7 +418,7 @@ static int hpt3x2n_pci_clock(struct pci_dev *pdev)
 		u16 sr;
 		u32 total = 0;
 
-		printk(KERN_WARNING "pata_hpt3x2n: BIOS clock data not set.\n");
+		pr_warning(DRV_NAME ": BIOS clock data not set.\n");
 
 		/* This is the process the HPT371 BIOS is reported to use */
 		for (i = 0; i < 128; i++) {
@@ -528,8 +528,7 @@ hpt372n:
 		ppi[0] = &info_hpt372n;
 		break;
 	default:
-		printk(KERN_ERR
-		       "pata_hpt3x2n: PCI table is bogus please report (%d).\n",
+		pr_err(DRV_NAME ": PCI table is bogus, please report (%d).\n",
 		       dev->device);
 		return -ENODEV;
 	}
@@ -579,12 +578,11 @@ hpt372n:
 		pci_write_config_dword(dev, 0x5C, (f_high << 16) | f_low);
 	}
 	if (adjust == 8) {
-		printk(KERN_ERR "pata_hpt3x2n: DPLL did not stabilize!\n");
+		pr_err(DRV_NAME ": DPLL did not stabilize!\n");
 		return -ENODEV;
 	}
 
-	printk(KERN_INFO "pata_hpt37x: bus clock %dMHz, using 66MHz DPLL.\n",
-	       pci_mhz);
+	pr_info(DRV_NAME ": bus clock %dMHz, using 66MHz DPLL.\n", pci_mhz);
 
 	/*
 	 * Set our private data up. We only need a few flags
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 8cc536e..d7d8026 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -610,7 +610,7 @@ static struct scsi_host_template mpc52xx_ata_sht = {
 };
 
 static struct ata_port_operations mpc52xx_ata_port_ops = {
-	.inherits		= &ata_sff_port_ops,
+	.inherits		= &ata_bmdma_port_ops,
 	.sff_dev_select		= mpc52xx_ata_dev_select,
 	.set_piomode		= mpc52xx_ata_set_piomode,
 	.set_dmamode		= mpc52xx_ata_set_dmamode,

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2010-08-04 18:32 ` Linus Torvalds
@ 2010-08-04 18:46   ` Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2010-08-04 18:46 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Andrew Morton, linux-ide, LKML

On 08/04/2010 02:32 PM, Linus Torvalds wrote:
> On Tue, Aug 3, 2010 at 6:55 PM, Jeff Garzik<jeff@garzik.org>  wrote:
>>
>> Tejun Heo (4):
>>       ata_generic: drop hard coded DMA force logic for CENATEK
>>       ata_piix: fix locking around SIDPR access
>>       libata: more PCI IDs for jmicron controllers
>>       sata_fsl,mv,nv: prepare for NCQ command completion update
>
> Hmm. Aren't these the ones that you said causes "sata_mv is behaving
> weirdly"? I think I'll wait for you to do another pull request when
> that is sorted out..

"prepare for..." is patch #1 of 2.  With #2, sata_mv starts behaving 
strangely.  #1 seems to be working here.

	Jeff



^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2010-08-04  1:55 Jeff Garzik
@ 2010-08-04 18:32 ` Linus Torvalds
  2010-08-04 18:46   ` Jeff Garzik
  0 siblings, 1 reply; 95+ messages in thread
From: Linus Torvalds @ 2010-08-04 18:32 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, linux-ide, LKML

On Tue, Aug 3, 2010 at 6:55 PM, Jeff Garzik <jeff@garzik.org> wrote:
>
> Tejun Heo (4):
>      ata_generic: drop hard coded DMA force logic for CENATEK
>      ata_piix: fix locking around SIDPR access
>      libata: more PCI IDs for jmicron controllers
>      sata_fsl,mv,nv: prepare for NCQ command completion update

Hmm. Aren't these the ones that you said causes "sata_mv is behaving
weirdly"? I think I'll wait for you to do another pull request when
that is sorted out..

             Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2010-08-04  1:55 Jeff Garzik
  2010-08-04 18:32 ` Linus Torvalds
  0 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2010-08-04  1:55 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/Kconfig           |   18 +
 drivers/ata/Makefile          |    2 +
 drivers/ata/ahci.c            |    2 +-
 drivers/ata/ahci_platform.c   |   26 +-
 drivers/ata/ata_generic.c     |    4 -
 drivers/ata/ata_piix.c        |    8 +
 drivers/ata/libata-core.c     |  161 ++---
 drivers/ata/libata-eh.c       |    1 +
 drivers/ata/pata_samsung_cf.c |  683 ++++++++++++++++
 drivers/ata/pata_scc.c        |    3 +-
 drivers/ata/sata_dwc_460ex.c  | 1756 +++++++++++++++++++++++++++++++++++++++++
 drivers/ata/sata_fsl.c        |   20 +-
 drivers/ata/sata_mv.c         |   47 +-
 drivers/ata/sata_nv.c         |   32 +-
 drivers/pci/quirks.c          |    6 +
 include/linux/ahci_platform.h |    4 +-
 include/linux/pci_ids.h       |    2 +
 17 files changed, 2616 insertions(+), 159 deletions(-)
 create mode 100644 drivers/ata/pata_samsung_cf.c
 create mode 100644 drivers/ata/sata_dwc_460ex.c

Abhilash Kesavan (1):
      [libata] Add Samsung PATA controller driver, pata_samsung_cf

Anton Vorontsov (1):
      ahci_platform: Remove unneeded ahci_driver.probe assignment

FUJITA Tomonori (1):
      [libata] add ATA_CMD_DSM to ata_get_cmd_descript

Jassi Brar (1):
      ahci_platform: Provide for vendor specific init

Justin P. Mattock (1):
      [libata] ahci: Fix warning: comparison between 'enum <anonymous>' and 'enum <anonymous>'

Mark Lord (5):
      libata: glob_match for ata_device_blacklist (v2)
      libata: reduce blacklist size (v2)
      libata: reduce blacklist size even more (v2)
      libata: allow hyphenated pattern ranges
      [libata] update blacklist for new hyphenated pattern ranges (v2)

Peter Huewe (1):
      ata: Convert pci_table entries to PCI_VDEVICE (if PCI_ANY_ID is used)

Rupjyoti Sarmah (1):
      [libata] Add 460EX on-chip SATA driver, sata_dwc_460ex

Tejun Heo (4):
      ata_generic: drop hard coded DMA force logic for CENATEK
      ata_piix: fix locking around SIDPR access
      libata: more PCI IDs for jmicron controllers
      sata_fsl,mv,nv: prepare for NCQ command completion update

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index aa85a98..8fae6af 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -187,6 +187,15 @@ config ATA_PIIX
 
 	  If unsure, say N.
 
+config SATA_DWC
+	tristate "DesignWare Cores SATA support"
+	depends on 460EX
+	help
+	  This option enables support for the on-chip SATA controller of the
+	  AppliedMicro processor 460EX.
+
+	  If unsure, say N.
+
 config SATA_MV
 	tristate "Marvell SATA support"
 	help
@@ -796,6 +805,15 @@ config PATA_RZ1000
 
 	  If unsure, say N.
 
+config PATA_SAMSUNG_CF
+	tristate "Samsung SoC PATA support"
+	depends on SAMSUNG_DEV_IDE
+	help
+	  This option enables basic support for Samsung's S3C/S5P board
+	  PATA controllers via the new ATA layer
+
+	  If unsure, say N.
+
 config PATA_WINBOND_VLB
 	tristate "Winbond W83759A VLB PATA support (Experimental)"
 	depends on ISA && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 7ef89d7..6540632 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
 obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
+obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
 
 # SFF w/ custom DMA
 obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
@@ -87,6 +88,7 @@ obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
+obj-$(CONFIG_PATA_SAMSUNG_CF)	+= pata_samsung_cf.o
 obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
 
 # Should be last but two libata driver
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index f252253..fe75d8b 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -1042,7 +1042,7 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	VPRINTK("ENTER\n");
 
-	WARN_ON(ATA_MAX_QUEUE > AHCI_MAX_CMDS);
+	WARN_ON((int)ATA_MAX_QUEUE > AHCI_MAX_CMDS);
 
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
diff --git a/drivers/ata/ahci_platform.c b/drivers/ata/ahci_platform.c
index 5e11b16..4e97f33 100644
--- a/drivers/ata/ahci_platform.c
+++ b/drivers/ata/ahci_platform.c
@@ -54,19 +54,13 @@ static int __init ahci_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (pdata && pdata->init) {
-		rc = pdata->init(dev);
-		if (rc)
-			return rc;
-	}
-
 	if (pdata && pdata->ata_port_info)
 		pi = *pdata->ata_port_info;
 
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv) {
-		rc = -ENOMEM;
-		goto err0;
+		dev_err(dev, "can't alloc ahci_host_priv\n");
+		return -ENOMEM;
 	}
 
 	hpriv->flags |= (unsigned long)pi.private_data;
@@ -74,8 +68,19 @@ static int __init ahci_probe(struct platform_device *pdev)
 	hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
 	if (!hpriv->mmio) {
 		dev_err(dev, "can't map %pR\n", mem);
-		rc = -ENOMEM;
-		goto err0;
+		return -ENOMEM;
+	}
+
+	/*
+	 * Some platforms might need to prepare for mmio region access,
+	 * which could be done in the following init call. So, the mmio
+	 * region shouldn't be accessed before init (if provided) has
+	 * returned successfully.
+	 */
+	if (pdata && pdata->init) {
+		rc = pdata->init(dev, hpriv->mmio);
+		if (rc)
+			return rc;
 	}
 
 	ahci_save_initial_config(dev, hpriv,
@@ -166,7 +171,6 @@ static int __devexit ahci_remove(struct platform_device *pdev)
 }
 
 static struct platform_driver ahci_driver = {
-	.probe = ahci_probe,
 	.remove = __devexit_p(ahci_remove),
 	.driver = {
 		.name = "ahci",
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 7107a69..cc5f772 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -54,7 +54,6 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 	const struct pci_device_id *id = ap->host->private_data;
 	int dma_enabled = 0;
 	struct ata_device *dev;
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
 
 	if (id->driver_data & ATA_GEN_FORCE_DMA) {
 		dma_enabled = 0xff;
@@ -63,9 +62,6 @@ static int generic_set_mode(struct ata_link *link, struct ata_device **unused)
 		dma_enabled = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 	}
 
-	if (pdev->vendor == PCI_VENDOR_ID_CENATEK)
-		dma_enabled = 0xFF;
-
 	ata_for_each_dev(dev, link, ENABLED) {
 		/* We don't really care */
 		dev->pio_mode = XFER_PIO_0;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 7409f98..3971bc0 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -158,6 +158,7 @@ struct piix_map_db {
 struct piix_host_priv {
 	const int *map;
 	u32 saved_iocfg;
+	spinlock_t sidpr_lock;	/* FIXME: remove once locking in EH is fixed */
 	void __iomem *sidpr;
 };
 
@@ -951,12 +952,15 @@ static int piix_sidpr_scr_read(struct ata_link *link,
 			       unsigned int reg, u32 *val)
 {
 	struct piix_host_priv *hpriv = link->ap->host->private_data;
+	unsigned long flags;
 
 	if (reg >= ARRAY_SIZE(piix_sidx_map))
 		return -EINVAL;
 
+	spin_lock_irqsave(&hpriv->sidpr_lock, flags);
 	piix_sidpr_sel(link, reg);
 	*val = ioread32(hpriv->sidpr + PIIX_SIDPR_DATA);
+	spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
 	return 0;
 }
 
@@ -964,12 +968,15 @@ static int piix_sidpr_scr_write(struct ata_link *link,
 				unsigned int reg, u32 val)
 {
 	struct piix_host_priv *hpriv = link->ap->host->private_data;
+	unsigned long flags;
 
 	if (reg >= ARRAY_SIZE(piix_sidx_map))
 		return -EINVAL;
 
+	spin_lock_irqsave(&hpriv->sidpr_lock, flags);
 	piix_sidpr_sel(link, reg);
 	iowrite32(val, hpriv->sidpr + PIIX_SIDPR_DATA);
+	spin_unlock_irqrestore(&hpriv->sidpr_lock, flags);
 	return 0;
 }
 
@@ -1566,6 +1573,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
 	if (!hpriv)
 		return -ENOMEM;
+	spin_lock_init(&hpriv->sidpr_lock);
 
 	/* Save IOCFG, this will be used for cable detection, quirk
 	 * detection and restoration on detach.  This is necessary
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ddf8e48..a0a4d69 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4167,15 +4167,13 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "WDC AC23200L",	"21.10N21",	ATA_HORKAGE_NODMA },
 	{ "Compaq CRD-8241B", 	NULL,		ATA_HORKAGE_NODMA },
 	{ "CRD-8400B",		NULL, 		ATA_HORKAGE_NODMA },
-	{ "CRD-8480B",		NULL,		ATA_HORKAGE_NODMA },
-	{ "CRD-8482B",		NULL,		ATA_HORKAGE_NODMA },
+	{ "CRD-848[02]B",	NULL,		ATA_HORKAGE_NODMA },
 	{ "CRD-84",		NULL,		ATA_HORKAGE_NODMA },
 	{ "SanDisk SDP3B",	NULL,		ATA_HORKAGE_NODMA },
 	{ "SanDisk SDP3B-64",	NULL,		ATA_HORKAGE_NODMA },
 	{ "SANYO CD-ROM CRD",	NULL,		ATA_HORKAGE_NODMA },
 	{ "HITACHI CDR-8",	NULL,		ATA_HORKAGE_NODMA },
-	{ "HITACHI CDR-8335",	NULL,		ATA_HORKAGE_NODMA },
-	{ "HITACHI CDR-8435",	NULL,		ATA_HORKAGE_NODMA },
+	{ "HITACHI CDR-8[34]35",NULL,		ATA_HORKAGE_NODMA },
 	{ "Toshiba CD-ROM XM-6202B", NULL,	ATA_HORKAGE_NODMA },
 	{ "TOSHIBA CD-ROM XM-1702BC", NULL,	ATA_HORKAGE_NODMA },
 	{ "CD-532E-A", 		NULL,		ATA_HORKAGE_NODMA },
@@ -4211,70 +4209,16 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "OCZ CORE_SSD",	"02.10104",	ATA_HORKAGE_NONCQ },
 
 	/* Seagate NCQ + FLUSH CACHE firmware bug */
-	{ "ST31500341AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31500341AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST31500341AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	{ "ST31000333AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST31000333AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST31000333AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	{ "ST3640623AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640623AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST3640[36]23AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
-	{ "ST3640323AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3640323AS",	"SD19",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-
-	{ "ST3320813AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320813AS",	"SD19",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-
-	{ "ST3320613AS",	"SD15",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD16",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD17",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD18",		ATA_HORKAGE_NONCQ |
-						ATA_HORKAGE_FIRMWARE_WARN },
-	{ "ST3320613AS",	"SD19",		ATA_HORKAGE_NONCQ |
+	{ "ST3320[68]13AS",	"SD1[5-9]",	ATA_HORKAGE_NONCQ |
 						ATA_HORKAGE_FIRMWARE_WARN },
 
 	/* Blacklist entries taken from Silicon Image 3124/3132
@@ -4303,12 +4247,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Devices which get the IVB wrong */
 	{ "QUANTUM FIREBALLlct10 05", "A03.0900", ATA_HORKAGE_IVB, },
 	/* Maybe we should just blacklist TSSTcorp... */
-	{ "TSSTcorp CDDVDW SH-S202H", "SB00",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202H", "SB01",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202J", "SB00",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202J", "SB01",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202N", "SB00",	  ATA_HORKAGE_IVB, },
-	{ "TSSTcorp CDDVDW SH-S202N", "SB01",	  ATA_HORKAGE_IVB, },
+	{ "TSSTcorp CDDVDW SH-S202[HJN]", "SB0[01]",  ATA_HORKAGE_IVB, },
 
 	/* Devices that do not need bridging limits applied */
 	{ "MTRON MSP-SATA*",		NULL,	ATA_HORKAGE_BRIDGE_OK, },
@@ -4326,29 +4265,73 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ }
 };
 
-static int strn_pattern_cmp(const char *patt, const char *name, int wildchar)
+/**
+ *	glob_match - match a text string against a glob-style pattern
+ *	@text: the string to be examined
+ *	@pattern: the glob-style pattern to be matched against
+ *
+ *	Either/both of text and pattern can be empty strings.
+ *
+ *	Match text against a glob-style pattern, with wildcards and simple sets:
+ *
+ *		?	matches any single character.
+ *		*	matches any run of characters.
+ *		[xyz]	matches a single character from the set: x, y, or z.
+ *		[a-d]	matches a single character from the range: a, b, c, or d.
+ *		[a-d0-9] matches a single character from either range.
+ *
+ *	The special characters ?, [, -, or *, can be matched using a set, eg. [*]
+ *	Behaviour with malformed patterns is undefined, though generally reasonable.
+ *
+ *	Example patterns:  "SD1?",  "SD1[0-5]",  "*R0",  SD*1?[012]*xx"
+ *
+ *	This function uses one level of recursion per '*' in pattern.
+ *	Since it calls _nothing_ else, and has _no_ explicit local variables,
+ *	this will not cause stack problems for any reasonable use here.
+ *
+ *	RETURNS:
+ *	0 on match, 1 otherwise.
+ */
+static int glob_match (const char *text, const char *pattern)
 {
-	const char *p;
-	int len;
-
-	/*
-	 * check for trailing wildcard: *\0
-	 */
-	p = strchr(patt, wildchar);
-	if (p && ((*(p + 1)) == 0))
-		len = p - patt;
-	else {
-		len = strlen(name);
-		if (!len) {
-			if (!*patt)
-				return 0;
-			return -1;
+	do {
+		/* Match single character or a '?' wildcard */
+		if (*text == *pattern || *pattern == '?') {
+			if (!*pattern++)
+				return 0;  /* End of both strings: match */
+		} else {
+			/* Match single char against a '[' bracketed ']' pattern set */
+			if (!*text || *pattern != '[')
+				break;  /* Not a pattern set */
+			while (*++pattern && *pattern != ']' && *text != *pattern) {
+				if (*pattern == '-' && *(pattern - 1) != '[')
+					if (*text > *(pattern - 1) && *text < *(pattern + 1)) {
+						++pattern;
+						break;
+					}
+			}
+			if (!*pattern || *pattern == ']')
+				return 1;  /* No match */
+			while (*pattern && *pattern++ != ']');
+		}
+	} while (*++text && *pattern);
+
+	/* Match any run of chars against a '*' wildcard */
+	if (*pattern == '*') {
+		if (!*++pattern)
+			return 0;  /* Match: avoid recursion at end of pattern */
+		/* Loop to handle additional pattern chars after the wildcard */
+		while (*text) {
+			if (glob_match(text, pattern) == 0)
+				return 0;  /* Remainder matched */
+			++text;  /* Absorb (match) this char and try again */
 		}
 	}
-
-	return strncmp(patt, name, len);
+	if (!*text && !*pattern)
+		return 0;  /* End of both strings: match */
+	return 1;  /* No match */
 }
-
+ 
 static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 {
 	unsigned char model_num[ATA_ID_PROD_LEN + 1];
@@ -4359,10 +4342,10 @@ static unsigned long ata_dev_blacklisted(const struct ata_device *dev)
 	ata_id_c_string(dev->id, model_rev, ATA_ID_FW_REV, sizeof(model_rev));
 
 	while (ad->model_num) {
-		if (!strn_pattern_cmp(ad->model_num, model_num, '*')) {
+		if (!glob_match(model_num, ad->model_num)) {
 			if (ad->model_rev == NULL)
 				return ad->horkage;
-			if (!strn_pattern_cmp(ad->model_rev, model_rev, '*'))
+			if (!glob_match(model_rev, ad->model_rev))
 				return ad->horkage;
 		}
 		ad++;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index f77a673..697474b 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2214,6 +2214,7 @@ const char *ata_get_cmd_descript(u8 command)
 		{ ATA_CMD_SMART,		"SMART" },
 		{ ATA_CMD_MEDIA_LOCK,		"DOOR LOCK" },
 		{ ATA_CMD_MEDIA_UNLOCK,		"DOOR UNLOCK" },
+		{ ATA_CMD_DSM,			"DATA SET MANAGEMENT" },
 		{ ATA_CMD_CHK_MED_CRD_TYP, 	"CHECK MEDIA CARD TYPE" },
 		{ ATA_CMD_CFA_REQ_EXT_ERR, 	"CFA REQUEST EXTENDED ERROR" },
 		{ ATA_CMD_CFA_WRITE_NE,		"CFA WRITE SECTORS WITHOUT ERASE" },
diff --git a/drivers/ata/pata_samsung_cf.c b/drivers/ata/pata_samsung_cf.c
new file mode 100644
index 0000000..6f9cfb2
--- /dev/null
+++ b/drivers/ata/pata_samsung_cf.c
@@ -0,0 +1,683 @@
+/*
+ * Copyright (c) 2010 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ *
+ * PATA driver for Samsung SoCs.
+ * Supports CF Interface in True IDE mode. Currently only PIO mode has been
+ * implemented; UDMA support has to be added.
+ *
+ * Based on:
+ *	PATA driver for AT91SAM9260 Static Memory Controller
+ *	PATA driver for Toshiba SCC controller
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <plat/ata.h>
+#include <plat/regs-ata.h>
+
+#define DRV_NAME "pata_samsung_cf"
+#define DRV_VERSION "0.1"
+
+enum s3c_cpu_type {
+	TYPE_S3C64XX,
+	TYPE_S5PC100,
+	TYPE_S5PV210,
+};
+
+/*
+ * struct s3c_ide_info - S3C PATA instance.
+ * @clk: The clock resource for this controller.
+ * @ide_addr: The area mapped for the hardware registers.
+ * @sfr_addr: The area mapped for the special function registers.
+ * @irq: The IRQ number we are using.
+ * @cpu_type: The exact type of this controller.
+ * @fifo_status_reg: The ATA_FIFO_STATUS register offset.
+ */
+struct s3c_ide_info {
+	struct clk *clk;
+	void __iomem *ide_addr;
+	void __iomem *sfr_addr;
+	unsigned int irq;
+	enum s3c_cpu_type cpu_type;
+	unsigned int fifo_status_reg;
+};
+
+static void pata_s3c_set_endian(void __iomem *s3c_ide_regbase, u8 mode)
+{
+	u32 reg = readl(s3c_ide_regbase + S3C_ATA_CFG);
+	reg = mode ? (reg & ~S3C_ATA_CFG_SWAP) : (reg | S3C_ATA_CFG_SWAP);
+	writel(reg, s3c_ide_regbase + S3C_ATA_CFG);
+}
+
+static void pata_s3c_cfg_mode(void __iomem *s3c_ide_sfrbase)
+{
+	/* Select true-ide as the internal operating mode */
+	writel(readl(s3c_ide_sfrbase + S3C_CFATA_MUX) | S3C_CFATA_MUX_TRUEIDE,
+		s3c_ide_sfrbase + S3C_CFATA_MUX);
+}
+
+static unsigned long
+pata_s3c_setup_timing(struct s3c_ide_info *info, const struct ata_timing *ata)
+{
+	int t1 = ata->setup;
+	int t2 = ata->act8b;
+	int t2i = ata->rec8b;
+	ulong piotime;
+
+	piotime = ((t2i & 0xff) << 12) | ((t2 & 0xff) << 4) | (t1 & 0xf);
+
+	return piotime;
+}
+
+static void pata_s3c_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct s3c_ide_info *info = ap->host->private_data;
+	struct ata_timing timing;
+	int cycle_time;
+	ulong ata_cfg = readl(info->ide_addr + S3C_ATA_CFG);
+	ulong piotime;
+
+	/* Enables IORDY if mode requires it */
+	if (ata_pio_need_iordy(adev))
+		ata_cfg |= S3C_ATA_CFG_IORDYEN;
+	else
+		ata_cfg &= ~S3C_ATA_CFG_IORDYEN;
+
+	cycle_time = (int)(1000000000UL / clk_get_rate(info->clk));
+
+	ata_timing_compute(adev, adev->pio_mode, &timing,
+					cycle_time * 1000, 0);
+
+	piotime = pata_s3c_setup_timing(info, &timing);
+
+	writel(ata_cfg, info->ide_addr + S3C_ATA_CFG);
+	writel(piotime, info->ide_addr + S3C_ATA_PIO_TIME);
+}
+
+/*
+ * Waits until the IDE controller is able to perform next read/write
+ * operation to the disk. Needed for 64XX series boards only.
+ */
+static int wait_for_host_ready(struct s3c_ide_info *info)
+{
+	ulong timeout;
+	void __iomem *fifo_reg = info->ide_addr + info->fifo_status_reg;
+
+	/* wait for maximum of 20 msec */
+	timeout = jiffies + msecs_to_jiffies(20);
+	while (time_before(jiffies, timeout)) {
+		if ((readl(fifo_reg) >> 28) == 0)
+			return 0;
+	}
+	return -EBUSY;
+}
+
+/*
+ * Writes to one of the task file registers.
+ */
+static void ata_outb(struct ata_host *host, u8 addr, void __iomem *reg)
+{
+	struct s3c_ide_info *info = host->private_data;
+
+	wait_for_host_ready(info);
+	writeb(addr, reg);
+}
+
+/*
+ * Reads from one of the task file registers.
+ */
+static u8 ata_inb(struct ata_host *host, void __iomem *reg)
+{
+	struct s3c_ide_info *info = host->private_data;
+	u8 temp;
+
+	wait_for_host_ready(info);
+	(void) readb(reg);
+	wait_for_host_ready(info);
+	temp = readb(info->ide_addr + S3C_ATA_PIO_RDATA);
+	return temp;
+}
+
+/*
+ * pata_s3c_tf_load - send taskfile registers to host controller
+ */
+static void pata_s3c_tf_load(struct ata_port *ap,
+				const struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		ata_outb(ap->host, tf->hob_feature, ioaddr->feature_addr);
+		ata_outb(ap->host, tf->hob_nsect, ioaddr->nsect_addr);
+		ata_outb(ap->host, tf->hob_lbal, ioaddr->lbal_addr);
+		ata_outb(ap->host, tf->hob_lbam, ioaddr->lbam_addr);
+		ata_outb(ap->host, tf->hob_lbah, ioaddr->lbah_addr);
+	}
+
+	if (is_addr) {
+		ata_outb(ap->host, tf->feature, ioaddr->feature_addr);
+		ata_outb(ap->host, tf->nsect, ioaddr->nsect_addr);
+		ata_outb(ap->host, tf->lbal, ioaddr->lbal_addr);
+		ata_outb(ap->host, tf->lbam, ioaddr->lbam_addr);
+		ata_outb(ap->host, tf->lbah, ioaddr->lbah_addr);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE)
+		ata_outb(ap->host, tf->device, ioaddr->device_addr);
+
+	ata_wait_idle(ap);
+}
+
+/*
+ * pata_s3c_tf_read - input device's ATA taskfile shadow registers
+ */
+static void pata_s3c_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	tf->feature = ata_inb(ap->host, ioaddr->error_addr);
+	tf->nsect = ata_inb(ap->host, ioaddr->nsect_addr);
+	tf->lbal = ata_inb(ap->host, ioaddr->lbal_addr);
+	tf->lbam = ata_inb(ap->host, ioaddr->lbam_addr);
+	tf->lbah = ata_inb(ap->host, ioaddr->lbah_addr);
+	tf->device = ata_inb(ap->host, ioaddr->device_addr);
+
+	if (tf->flags & ATA_TFLAG_LBA48) {
+		ata_outb(ap->host, tf->ctl | ATA_HOB, ioaddr->ctl_addr);
+		tf->hob_feature = ata_inb(ap->host, ioaddr->error_addr);
+		tf->hob_nsect = ata_inb(ap->host, ioaddr->nsect_addr);
+		tf->hob_lbal = ata_inb(ap->host, ioaddr->lbal_addr);
+		tf->hob_lbam = ata_inb(ap->host, ioaddr->lbam_addr);
+		tf->hob_lbah = ata_inb(ap->host, ioaddr->lbah_addr);
+		ata_outb(ap->host, tf->ctl, ioaddr->ctl_addr);
+		ap->last_ctl = tf->ctl;
+	}
+}
+
+/*
+ * pata_s3c_exec_command - issue ATA command to host controller
+ */
+static void pata_s3c_exec_command(struct ata_port *ap,
+				const struct ata_taskfile *tf)
+{
+	ata_outb(ap->host, tf->command, ap->ioaddr.command_addr);
+	ata_sff_pause(ap);
+}
+
+/*
+ * pata_s3c_check_status - Read device status register
+ */
+static u8 pata_s3c_check_status(struct ata_port *ap)
+{
+	return ata_inb(ap->host, ap->ioaddr.status_addr);
+}
+
+/*
+ * pata_s3c_check_altstatus - Read alternate device status register
+ */
+static u8 pata_s3c_check_altstatus(struct ata_port *ap)
+{
+	return ata_inb(ap->host, ap->ioaddr.altstatus_addr);
+}
+
+/*
+ * pata_s3c_data_xfer - Transfer data by PIO
+ */
+unsigned int pata_s3c_data_xfer(struct ata_device *dev, unsigned char *buf,
+				unsigned int buflen, int rw)
+{
+	struct ata_port *ap = dev->link->ap;
+	struct s3c_ide_info *info = ap->host->private_data;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 1, i;
+	u16 *data_ptr = (u16 *)buf;
+
+	/* Requires wait same as in ata_inb/ata_outb */
+	if (rw == READ)
+		for (i = 0; i < words; i++, data_ptr++) {
+			wait_for_host_ready(info);
+			(void) readw(data_addr);
+			wait_for_host_ready(info);
+			*data_ptr = readw(info->ide_addr
+					+ S3C_ATA_PIO_RDATA);
+		}
+	else
+		for (i = 0; i < words; i++, data_ptr++) {
+			wait_for_host_ready(info);
+			writew(*data_ptr, data_addr);
+		}
+
+	if (buflen & 0x01)
+		dev_err(ap->dev, "unexpected trailing data\n");
+
+	return words << 1;
+}
+
+/*
+ * pata_s3c_dev_select - Select device on ATA bus
+ */
+static void pata_s3c_dev_select(struct ata_port *ap, unsigned int device)
+{
+	u8 tmp = ATA_DEVICE_OBS;
+
+	if (device != 0)
+		tmp |= ATA_DEV1;
+
+	ata_outb(ap->host, tmp, ap->ioaddr.device_addr);
+	ata_sff_pause(ap);
+}
+
+/*
+ * pata_s3c_devchk - PATA device presence detection
+ */
+static unsigned int pata_s3c_devchk(struct ata_port *ap,
+				unsigned int device)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	u8 nsect, lbal;
+
+	pata_s3c_dev_select(ap, device);
+
+	ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
+	ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);
+
+	ata_outb(ap->host, 0xaa, ioaddr->nsect_addr);
+	ata_outb(ap->host, 0x55, ioaddr->lbal_addr);
+
+	ata_outb(ap->host, 0x55, ioaddr->nsect_addr);
+	ata_outb(ap->host, 0xaa, ioaddr->lbal_addr);
+
+	nsect = ata_inb(ap->host, ioaddr->nsect_addr);
+	lbal = ata_inb(ap->host, ioaddr->lbal_addr);
+
+	if ((nsect == 0x55) && (lbal == 0xaa))
+		return 1;	/* we found a device */
+
+	return 0;		/* nothing found */
+}
+
+/*
+ * pata_s3c_wait_after_reset - wait for devices to become ready after reset
+ */
+static int pata_s3c_wait_after_reset(struct ata_link *link,
+		unsigned long deadline)
+{
+	int rc;
+
+	msleep(ATA_WAIT_AFTER_RESET);
+
+	/* always check readiness of the master device */
+	rc = ata_sff_wait_ready(link, deadline);
+	/* -ENODEV means the odd clown forgot the D7 pulldown resistor
+	 * and TF status is 0xff, bail out on it too.
+	 */
+	if (rc)
+		return rc;
+
+	return 0;
+}
+
+/*
+ * pata_s3c_bus_softreset - PATA device software reset
+ */
+static unsigned int pata_s3c_bus_softreset(struct ata_port *ap,
+		unsigned long deadline)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+
+	/* software reset.  causes dev0 to be selected */
+	ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
+	udelay(20);
+	ata_outb(ap->host, ap->ctl | ATA_SRST, ioaddr->ctl_addr);
+	udelay(20);
+	ata_outb(ap->host, ap->ctl, ioaddr->ctl_addr);
+	ap->last_ctl = ap->ctl;
+
+	return pata_s3c_wait_after_reset(&ap->link, deadline);
+}
+
+/*
+ * pata_s3c_softreset - reset host port via ATA SRST
+ */
+static int pata_s3c_softreset(struct ata_link *link, unsigned int *classes,
+			 unsigned long deadline)
+{
+	struct ata_port *ap = link->ap;
+	unsigned int devmask = 0;
+	int rc;
+	u8 err;
+
+	/* determine if device 0 is present */
+	if (pata_s3c_devchk(ap, 0))
+		devmask |= (1 << 0);
+
+	/* select device 0 again */
+	pata_s3c_dev_select(ap, 0);
+
+	/* issue bus reset */
+	rc = pata_s3c_bus_softreset(ap, deadline);
+	/* if link is occupied, -ENODEV too is an error */
+	if (rc && rc != -ENODEV) {
+		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
+		return rc;
+	}
+
+	/* determine by signature whether we have ATA or ATAPI devices */
+	classes[0] = ata_sff_dev_classify(&ap->link.device[0],
+					  devmask & (1 << 0), &err);
+
+	return 0;
+}
+
+/*
+ * pata_s3c_set_devctl - Write device control register
+ */
+static void pata_s3c_set_devctl(struct ata_port *ap, u8 ctl)
+{
+	ata_outb(ap->host, ctl, ap->ioaddr.ctl_addr);
+}
+
+static struct scsi_host_template pata_s3c_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_s3c_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.sff_check_status	= pata_s3c_check_status,
+	.sff_check_altstatus    = pata_s3c_check_altstatus,
+	.sff_tf_load		= pata_s3c_tf_load,
+	.sff_tf_read		= pata_s3c_tf_read,
+	.sff_data_xfer		= pata_s3c_data_xfer,
+	.sff_exec_command	= pata_s3c_exec_command,
+	.sff_dev_select         = pata_s3c_dev_select,
+	.sff_set_devctl         = pata_s3c_set_devctl,
+	.softreset		= pata_s3c_softreset,
+	.set_piomode		= pata_s3c_set_piomode,
+};
+
+static struct ata_port_operations pata_s5p_port_ops = {
+	.inherits		= &ata_sff_port_ops,
+	.set_piomode		= pata_s3c_set_piomode,
+};
+
+static void pata_s3c_enable(void *s3c_ide_regbase, bool state)
+{
+	u32 temp = readl(s3c_ide_regbase + S3C_ATA_CTRL);
+	temp = state ? (temp | 1) : (temp & ~1);
+	writel(temp, s3c_ide_regbase + S3C_ATA_CTRL);
+}
+
+static irqreturn_t pata_s3c_irq(int irq, void *dev_instance)
+{
+	struct ata_host *host = dev_instance;
+	struct s3c_ide_info *info = host->private_data;
+	u32 reg;
+
+	reg = readl(info->ide_addr + S3C_ATA_IRQ);
+	writel(reg, info->ide_addr + S3C_ATA_IRQ);
+
+	return ata_sff_interrupt(irq, dev_instance);
+}
+
+static void pata_s3c_hwinit(struct s3c_ide_info *info,
+				struct s3c_ide_platdata *pdata)
+{
+	switch (info->cpu_type) {
+	case TYPE_S3C64XX:
+		/* Configure as big endian */
+		pata_s3c_cfg_mode(info->sfr_addr);
+		pata_s3c_set_endian(info->ide_addr, 1);
+		pata_s3c_enable(info->ide_addr, true);
+		msleep(100);
+
+		/* Remove IRQ Status */
+		writel(0x1f, info->ide_addr + S3C_ATA_IRQ);
+		writel(0x1b, info->ide_addr + S3C_ATA_IRQ_MSK);
+		break;
+
+	case TYPE_S5PC100:
+		pata_s3c_cfg_mode(info->sfr_addr);
+		/* FALLTHROUGH */
+
+	case TYPE_S5PV210:
+		/* Configure as little endian */
+		pata_s3c_set_endian(info->ide_addr, 0);
+		pata_s3c_enable(info->ide_addr, true);
+		msleep(100);
+
+		/* Remove IRQ Status */
+		writel(0x3f, info->ide_addr + S3C_ATA_IRQ);
+		writel(0x3f, info->ide_addr + S3C_ATA_IRQ_MSK);
+		break;
+
+	default:
+		BUG();
+	}
+}
+
+static int __init pata_s3c_probe(struct platform_device *pdev)
+{
+	struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct s3c_ide_info *info;
+	struct resource *res;
+	struct ata_port *ap;
+	struct ata_host *host;
+	enum s3c_cpu_type cpu_type;
+	int ret;
+
+	cpu_type = platform_get_device_id(pdev)->driver_data;
+
+	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		dev_err(dev, "failed to allocate memory for device data\n");
+		return -ENOMEM;
+	}
+
+	info->irq = platform_get_irq(pdev, 0);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res == NULL) {
+		dev_err(dev, "failed to get mem resource\n");
+		return -EINVAL;
+	}
+
+	if (!devm_request_mem_region(dev, res->start,
+				resource_size(res), DRV_NAME)) {
+		dev_err(dev, "error requesting register region\n");
+		return -EBUSY;
+	}
+
+	info->ide_addr = devm_ioremap(dev, res->start, resource_size(res));
+	if (!info->ide_addr) {
+		dev_err(dev, "failed to map IO base address\n");
+		return -ENOMEM;
+	}
+
+	info->clk = clk_get(&pdev->dev, "cfcon");
+	if (IS_ERR(info->clk)) {
+		dev_err(dev, "failed to get access to cf controller clock\n");
+		ret = PTR_ERR(info->clk);
+		info->clk = NULL;
+		return ret;
+	}
+
+	clk_enable(info->clk);
+
+	/* init ata host */
+	host = ata_host_alloc(dev, 1);
+	if (!host) {
+		dev_err(dev, "failed to allocate ide host\n");
+		ret = -ENOMEM;
+		goto stop_clk;
+	}
+
+	ap = host->ports[0];
+	ap->flags |= ATA_FLAG_MMIO;
+	ap->pio_mask = ATA_PIO4;
+
+	if (cpu_type == TYPE_S3C64XX) {
+		ap->ops = &pata_s3c_port_ops;
+		info->sfr_addr = info->ide_addr + 0x1800;
+		info->ide_addr += 0x1900;
+		info->fifo_status_reg = 0x94;
+	} else if (cpu_type == TYPE_S5PC100) {
+		ap->ops = &pata_s5p_port_ops;
+		info->sfr_addr = info->ide_addr + 0x1800;
+		info->ide_addr += 0x1900;
+		info->fifo_status_reg = 0x84;
+	} else {
+		ap->ops = &pata_s5p_port_ops;
+		info->fifo_status_reg = 0x84;
+	}
+
+	info->cpu_type = cpu_type;
+
+	if (info->irq <= 0) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		info->irq = 0;
+		ata_port_desc(ap, "no IRQ, using PIO polling\n");
+	}
+
+	ap->ioaddr.cmd_addr =  info->ide_addr + S3C_ATA_CMD;
+	ap->ioaddr.data_addr = info->ide_addr + S3C_ATA_PIO_DTR;
+	ap->ioaddr.error_addr = info->ide_addr + S3C_ATA_PIO_FED;
+	ap->ioaddr.feature_addr = info->ide_addr + S3C_ATA_PIO_FED;
+	ap->ioaddr.nsect_addr = info->ide_addr + S3C_ATA_PIO_SCR;
+	ap->ioaddr.lbal_addr = info->ide_addr + S3C_ATA_PIO_LLR;
+	ap->ioaddr.lbam_addr = info->ide_addr + S3C_ATA_PIO_LMR;
+	ap->ioaddr.lbah_addr = info->ide_addr + S3C_ATA_PIO_LHR;
+	ap->ioaddr.device_addr = info->ide_addr + S3C_ATA_PIO_DVR;
+	ap->ioaddr.status_addr = info->ide_addr + S3C_ATA_PIO_CSD;
+	ap->ioaddr.command_addr = info->ide_addr + S3C_ATA_PIO_CSD;
+	ap->ioaddr.altstatus_addr = info->ide_addr + S3C_ATA_PIO_DAD;
+	ap->ioaddr.ctl_addr = info->ide_addr + S3C_ATA_PIO_DAD;
+
+	ata_port_desc(ap, "mmio cmd 0x%llx ",
+			(unsigned long long)res->start);
+
+	host->private_data = info;
+
+	if (pdata && pdata->setup_gpio)
+		pdata->setup_gpio();
+
+	/* Set endianness and enable the interface */
+	pata_s3c_hwinit(info, pdata);
+
+	platform_set_drvdata(pdev, host);
+
+	return ata_host_activate(host, info->irq,
+			info->irq ? pata_s3c_irq : NULL,
+			0, &pata_s3c_sht);
+
+stop_clk:
+	clk_disable(info->clk);
+	clk_put(info->clk);
+	return ret;
+}
+
+static int __exit pata_s3c_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct s3c_ide_info *info = host->private_data;
+
+	ata_host_detach(host);
+
+	clk_disable(info->clk);
+	clk_put(info->clk);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pata_s3c_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
+
+	return ata_host_suspend(host, PMSG_SUSPEND);
+}
+
+static int pata_s3c_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct s3c_ide_platdata *pdata = pdev->dev.platform_data;
+	struct s3c_ide_info *info = host->private_data;
+
+	pata_s3c_hwinit(info, pdata);
+	ata_host_resume(host);
+
+	return 0;
+}
+
+static const struct dev_pm_ops pata_s3c_pm_ops = {
+	.suspend	= pata_s3c_suspend,
+	.resume		= pata_s3c_resume,
+};
+#endif
+
+/* driver device registration */
+static struct platform_device_id pata_s3c_driver_ids[] = {
+	{
+		.name		= "s3c64xx-pata",
+		.driver_data	= TYPE_S3C64XX,
+	}, {
+		.name		= "s5pc100-pata",
+		.driver_data	= TYPE_S5PC100,
+	}, {
+		.name		= "s5pv210-pata",
+		.driver_data	= TYPE_S5PV210,
+	},
+	{ }
+};
+
+MODULE_DEVICE_TABLE(platform, pata_s3c_driver_ids);
+
+static struct platform_driver pata_s3c_driver = {
+	.remove		= __exit_p(pata_s3c_remove),
+	.id_table	= pata_s3c_driver_ids,
+	.driver		= {
+		.name	= DRV_NAME,
+		.owner	= THIS_MODULE,
+#ifdef CONFIG_PM
+		.pm	= &pata_s3c_pm_ops,
+#endif
+	},
+};
+
+static int __init pata_s3c_init(void)
+{
+	return platform_driver_probe(&pata_s3c_driver, pata_s3c_probe);
+}
+
+static void __exit pata_s3c_exit(void)
+{
+	platform_driver_unregister(&pata_s3c_driver);
+}
+
+module_init(pata_s3c_init);
+module_exit(pata_s3c_exit);
+
+MODULE_AUTHOR("Abhilash Kesavan, <a.kesavan@samsung.com>");
+MODULE_DESCRIPTION("low-level driver for Samsung PATA controller");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index d9db3f8..fe36966 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -168,8 +168,7 @@ static const unsigned long JCACTSELtbl[2][7] = {
 };
 
 static const struct pci_device_id scc_pci_tbl[] = {
-	{PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA,
-	 PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+	{ PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0},
 	{ }	/* terminate list */
 };
 
diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c
new file mode 100644
index 0000000..ea24c1e
--- /dev/null
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -0,0 +1,1756 @@
+/*
+ * drivers/ata/sata_dwc_460ex.c
+ *
+ * Synopsys DesignWare Cores (DWC) SATA host driver
+ *
+ * Author: Mark Miesfeld <mmiesfeld@amcc.com>
+ *
+ * Ported from 2.6.19.2 to 2.6.25/26 by Stefan Roese <sr@denx.de>
+ * Copyright 2008 DENX Software Engineering
+ *
+ * Based on versions provided by AMCC and Synopsys which are:
+ *          Copyright 2006 Applied Micro Circuits Corporation
+ *          COPYRIGHT (C) 2005  SYNOPSYS, INC.  ALL RIGHTS RESERVED
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#ifdef CONFIG_SATA_DWC_DEBUG
+#define DEBUG
+#endif
+
+#ifdef CONFIG_SATA_DWC_VDEBUG
+#define VERBOSE_DEBUG
+#define DEBUG_NCQ
+#endif
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/libata.h>
+#include <linux/slab.h>
+#include "libata.h"
+
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_cmnd.h>
+
+#define DRV_NAME        "sata-dwc"
+#define DRV_VERSION     "1.0"
+
+/* SATA DMA driver Globals */
+#define DMA_NUM_CHANS		1
+#define DMA_NUM_CHAN_REGS	8
+
+/* SATA DMA Register definitions */
+#define AHB_DMA_BRST_DFLT	64	/* 16 data items burst length*/
+
+struct dmareg {
+	u32 low;		/* Low bits 0-31 */
+	u32 high;		/* High bits 32-63 */
+};
+
+/* DMA Per Channel registers */
+struct dma_chan_regs {
+	struct dmareg sar;	/* Source Address */
+	struct dmareg dar;	/* Destination address */
+	struct dmareg llp;	/* Linked List Pointer */
+	struct dmareg ctl;	/* Control */
+	struct dmareg sstat;	/* Source Status not implemented in core */
+	struct dmareg dstat;	/* Destination Status not implemented in core*/
+	struct dmareg sstatar;	/* Source Status Address not impl in core */
+	struct dmareg dstatar;	/* Destination Status Address not implemente */
+	struct dmareg cfg;	/* Config */
+	struct dmareg sgr;	/* Source Gather */
+	struct dmareg dsr;	/* Destination Scatter */
+};
+
+/* Generic Interrupt Registers */
+struct dma_interrupt_regs {
+	struct dmareg tfr;	/* Transfer Interrupt */
+	struct dmareg block;	/* Block Interrupt */
+	struct dmareg srctran;	/* Source Transfer Interrupt */
+	struct dmareg dsttran;	/* Dest Transfer Interrupt */
+	struct dmareg error;	/* Error */
+};
+
+struct ahb_dma_regs {
+	struct dma_chan_regs	chan_regs[DMA_NUM_CHAN_REGS];
+	struct dma_interrupt_regs interrupt_raw;	/* Raw Interrupt */
+	struct dma_interrupt_regs interrupt_status;	/* Interrupt Status */
+	struct dma_interrupt_regs interrupt_mask;	/* Interrupt Mask */
+	struct dma_interrupt_regs interrupt_clear;	/* Interrupt Clear */
+	struct dmareg		statusInt;	/* Interrupt combined*/
+	struct dmareg		rq_srcreg;	/* Src Trans Req */
+	struct dmareg		rq_dstreg;	/* Dst Trans Req */
+	struct dmareg		rq_sgl_srcreg;	/* Sngl Src Trans Req*/
+	struct dmareg		rq_sgl_dstreg;	/* Sngl Dst Trans Req*/
+	struct dmareg		rq_lst_srcreg;	/* Last Src Trans Req*/
+	struct dmareg		rq_lst_dstreg;	/* Last Dst Trans Req*/
+	struct dmareg		dma_cfg;		/* DMA Config */
+	struct dmareg		dma_chan_en;		/* DMA Channel Enable*/
+	struct dmareg		dma_id;			/* DMA ID */
+	struct dmareg		dma_test;		/* DMA Test */
+	struct dmareg		res1;			/* reserved */
+	struct dmareg		res2;			/* reserved */
+	/*
+	 * DMA Comp Params
+	 * Param 6 = dma_param[0], Param 5 = dma_param[1],
+	 * Param 4 = dma_param[2] ...
+	 */
+	struct dmareg		dma_params[6];
+};
+
+/* Data structure for linked list item */
+struct lli {
+	u32		sar;		/* Source Address */
+	u32		dar;		/* Destination address */
+	u32		llp;		/* Linked List Pointer */
+	struct dmareg	ctl;		/* Control */
+	struct dmareg	dstat;		/* Destination Status */
+};
+
+enum {
+	SATA_DWC_DMAC_LLI_SZ =	(sizeof(struct lli)),
+	SATA_DWC_DMAC_LLI_NUM =	256,
+	SATA_DWC_DMAC_LLI_TBL_SZ = (SATA_DWC_DMAC_LLI_SZ * \
+					SATA_DWC_DMAC_LLI_NUM),
+	SATA_DWC_DMAC_TWIDTH_BYTES = 4,
+	SATA_DWC_DMAC_CTRL_TSIZE_MAX = (0x00000800 * \
+						SATA_DWC_DMAC_TWIDTH_BYTES),
+};
+
+/* DMA Register Operation Bits */
+enum {
+	DMA_EN	=		0x00000001, /* Enable AHB DMA */
+	DMA_CTL_LLP_SRCEN =	0x10000000, /* Blk chain enable Src */
+	DMA_CTL_LLP_DSTEN =	0x08000000, /* Blk chain enable Dst */
+};
+
+#define	DMA_CTL_BLK_TS(size)	((size) & 0x000000FFF)	/* Blk Transfer size */
+#define DMA_CHANNEL(ch)		(0x00000001 << (ch))	/* Select channel */
+	/* Enable channel */
+#define	DMA_ENABLE_CHAN(ch)	((0x00000001 << (ch)) |			\
+				 ((0x000000001 << (ch)) << 8))
+	/* Disable channel */
+#define	DMA_DISABLE_CHAN(ch)	(0x00000000 | ((0x000000001 << (ch)) << 8))
+	/* Transfer Type & Flow Controller */
+#define	DMA_CTL_TTFC(type)	(((type) & 0x7) << 20)
+#define	DMA_CTL_SMS(num)	(((num) & 0x3) << 25) /* Src Master Select */
+#define	DMA_CTL_DMS(num)	(((num) & 0x3) << 23)/* Dst Master Select */
+	/* Src Burst Transaction Length */
+#define DMA_CTL_SRC_MSIZE(size) (((size) & 0x7) << 14)
+	/* Dst Burst Transaction Length */
+#define	DMA_CTL_DST_MSIZE(size) (((size) & 0x7) << 11)
+	/* Source Transfer Width */
+#define	DMA_CTL_SRC_TRWID(size) (((size) & 0x7) << 4)
+	/* Destination Transfer Width */
+#define	DMA_CTL_DST_TRWID(size) (((size) & 0x7) << 1)
+
+/* Assign HW handshaking interface (x) to destination / source peripheral */
+#define	DMA_CFG_HW_HS_DEST(int_num) (((int_num) & 0xF) << 11)
+#define	DMA_CFG_HW_HS_SRC(int_num) (((int_num) & 0xF) << 7)
+#define	DMA_LLP_LMS(addr, master) (((addr) & 0xfffffffc) | (master))
+
+/*
+ * This define is used to set block chaining disabled in the control low
+ * register.  It is already in little endian format so it can be &'d dirctly.
+ * It is essentially: cpu_to_le32(~(DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN))
+ */
+enum {
+	DMA_CTL_LLP_DISABLE_LE32 = 0xffffffe7,
+	DMA_CTL_TTFC_P2M_DMAC =	0x00000002, /* Per to mem, DMAC cntr */
+	DMA_CTL_TTFC_M2P_PER =	0x00000003, /* Mem to per, peripheral cntr */
+	DMA_CTL_SINC_INC =	0x00000000, /* Source Address Increment */
+	DMA_CTL_SINC_DEC =	0x00000200,
+	DMA_CTL_SINC_NOCHANGE =	0x00000400,
+	DMA_CTL_DINC_INC =	0x00000000, /* Destination Address Increment */
+	DMA_CTL_DINC_DEC =	0x00000080,
+	DMA_CTL_DINC_NOCHANGE =	0x00000100,
+	DMA_CTL_INT_EN =	0x00000001, /* Interrupt Enable */
+
+/* Channel Configuration Register high bits */
+	DMA_CFG_FCMOD_REQ =	0x00000001, /* Flow Control - request based */
+	DMA_CFG_PROTCTL	=	(0x00000003 << 2),/* Protection Control */
+
+/* Channel Configuration Register low bits */
+	DMA_CFG_RELD_DST =	0x80000000, /* Reload Dest / Src Addr */
+	DMA_CFG_RELD_SRC =	0x40000000,
+	DMA_CFG_HS_SELSRC =	0x00000800, /* Software handshake Src/ Dest */
+	DMA_CFG_HS_SELDST =	0x00000400,
+	DMA_CFG_FIFOEMPTY =     (0x00000001 << 9), /* FIFO Empty bit */
+
+/* Channel Linked List Pointer Register */
+	DMA_LLP_AHBMASTER1 =	0,	/* List Master Select */
+	DMA_LLP_AHBMASTER2 =	1,
+
+	SATA_DWC_MAX_PORTS = 1,
+
+	SATA_DWC_SCR_OFFSET = 0x24,
+	SATA_DWC_REG_OFFSET = 0x64,
+};
+
+/* DWC SATA Registers */
+struct sata_dwc_regs {
+	u32 fptagr;		/* 1st party DMA tag */
+	u32 fpbor;		/* 1st party DMA buffer offset */
+	u32 fptcr;		/* 1st party DMA Xfr count */
+	u32 dmacr;		/* DMA Control */
+	u32 dbtsr;		/* DMA Burst Transac size */
+	u32 intpr;		/* Interrupt Pending */
+	u32 intmr;		/* Interrupt Mask */
+	u32 errmr;		/* Error Mask */
+	u32 llcr;		/* Link Layer Control */
+	u32 phycr;		/* PHY Control */
+	u32 physr;		/* PHY Status */
+	u32 rxbistpd;		/* Recvd BIST pattern def register */
+	u32 rxbistpd1;		/* Recvd BIST data dword1 */
+	u32 rxbistpd2;		/* Recvd BIST pattern data dword2 */
+	u32 txbistpd;		/* Trans BIST pattern def register */
+	u32 txbistpd1;		/* Trans BIST data dword1 */
+	u32 txbistpd2;		/* Trans BIST data dword2 */
+	u32 bistcr;		/* BIST Control Register */
+	u32 bistfctr;		/* BIST FIS Count Register */
+	u32 bistsr;		/* BIST Status Register */
+	u32 bistdecr;		/* BIST Dword Error count register */
+	u32 res[15];		/* Reserved locations */
+	u32 testr;		/* Test Register */
+	u32 versionr;		/* Version Register */
+	u32 idr;		/* ID Register */
+	u32 unimpl[192];	/* Unimplemented */
+	u32 dmadr[256];	/* FIFO Locations in DMA Mode */
+};
+
+enum {
+	SCR_SCONTROL_DET_ENABLE	=	0x00000001,
+	SCR_SSTATUS_DET_PRESENT	=	0x00000001,
+	SCR_SERROR_DIAG_X	=	0x04000000,
+/* DWC SATA Register Operations */
+	SATA_DWC_TXFIFO_DEPTH	=	0x01FF,
+	SATA_DWC_RXFIFO_DEPTH	=	0x01FF,
+	SATA_DWC_DMACR_TMOD_TXCHEN =	0x00000004,
+	SATA_DWC_DMACR_TXCHEN	= (0x00000001 | SATA_DWC_DMACR_TMOD_TXCHEN),
+	SATA_DWC_DMACR_RXCHEN	= (0x00000002 | SATA_DWC_DMACR_TMOD_TXCHEN),
+	SATA_DWC_DMACR_TXRXCH_CLEAR =	SATA_DWC_DMACR_TMOD_TXCHEN,
+	SATA_DWC_INTPR_DMAT	=	0x00000001,
+	SATA_DWC_INTPR_NEWFP	=	0x00000002,
+	SATA_DWC_INTPR_PMABRT	=	0x00000004,
+	SATA_DWC_INTPR_ERR	=	0x00000008,
+	SATA_DWC_INTPR_NEWBIST	=	0x00000010,
+	SATA_DWC_INTPR_IPF	=	0x10000000,
+	SATA_DWC_INTMR_DMATM	=	0x00000001,
+	SATA_DWC_INTMR_NEWFPM	=	0x00000002,
+	SATA_DWC_INTMR_PMABRTM	=	0x00000004,
+	SATA_DWC_INTMR_ERRM	=	0x00000008,
+	SATA_DWC_INTMR_NEWBISTM	=	0x00000010,
+	SATA_DWC_LLCR_SCRAMEN	=	0x00000001,
+	SATA_DWC_LLCR_DESCRAMEN	=	0x00000002,
+	SATA_DWC_LLCR_RPDEN	=	0x00000004,
+/* This is all error bits, zero's are reserved fields. */
+	SATA_DWC_SERROR_ERR_BITS =	0x0FFF0F03
+};
+
+#define SATA_DWC_SCR0_SPD_GET(v)	(((v) >> 4) & 0x0000000F)
+#define SATA_DWC_DMACR_TX_CLEAR(v)	(((v) & ~SATA_DWC_DMACR_TXCHEN) |\
+						 SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DMACR_RX_CLEAR(v)	(((v) & ~SATA_DWC_DMACR_RXCHEN) |\
+						 SATA_DWC_DMACR_TMOD_TXCHEN)
+#define SATA_DWC_DBTSR_MWR(size)	(((size)/4) & SATA_DWC_TXFIFO_DEPTH)
+#define SATA_DWC_DBTSR_MRD(size)	((((size)/4) & SATA_DWC_RXFIFO_DEPTH)\
+						 << 16)
+struct sata_dwc_device {
+	struct device		*dev;		/* generic device struct */
+	struct ata_probe_ent	*pe;		/* ptr to probe-ent */
+	struct ata_host		*host;
+	u8			*reg_base;
+	struct sata_dwc_regs	*sata_dwc_regs;	/* DW Synopsys SATA specific */
+	int			irq_dma;
+};
+
+#define SATA_DWC_QCMD_MAX	32
+
+struct sata_dwc_device_port {
+	struct sata_dwc_device	*hsdev;
+	int			cmd_issued[SATA_DWC_QCMD_MAX];
+	struct lli		*llit[SATA_DWC_QCMD_MAX];  /* DMA LLI table */
+	dma_addr_t		llit_dma[SATA_DWC_QCMD_MAX];
+	u32			dma_chan[SATA_DWC_QCMD_MAX];
+	int			dma_pending[SATA_DWC_QCMD_MAX];
+};
+
+/*
+ * Commonly used DWC SATA driver Macros
+ */
+#define HSDEV_FROM_HOST(host)  ((struct sata_dwc_device *)\
+					(host)->private_data)
+#define HSDEV_FROM_AP(ap)  ((struct sata_dwc_device *)\
+					(ap)->host->private_data)
+#define HSDEVP_FROM_AP(ap)   ((struct sata_dwc_device_port *)\
+					(ap)->private_data)
+#define HSDEV_FROM_QC(qc)	((struct sata_dwc_device *)\
+					(qc)->ap->host->private_data)
+#define HSDEV_FROM_HSDEVP(p)	((struct sata_dwc_device *)\
+						(hsdevp)->hsdev)
+
+enum {
+	SATA_DWC_CMD_ISSUED_NOT		= 0,
+	SATA_DWC_CMD_ISSUED_PEND	= 1,
+	SATA_DWC_CMD_ISSUED_EXEC	= 2,
+	SATA_DWC_CMD_ISSUED_NODATA	= 3,
+
+	SATA_DWC_DMA_PENDING_NONE	= 0,
+	SATA_DWC_DMA_PENDING_TX		= 1,
+	SATA_DWC_DMA_PENDING_RX		= 2,
+};
+
+struct sata_dwc_host_priv {
+	void	__iomem	 *scr_addr_sstatus;
+	u32	sata_dwc_sactive_issued ;
+	u32	sata_dwc_sactive_queued ;
+	u32	dma_interrupt_count;
+	struct	ahb_dma_regs	*sata_dma_regs;
+	struct	device	*dwc_dev;
+};
+struct sata_dwc_host_priv host_pvt;
+/*
+ * Prototypes
+ */
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag);
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+				u32 check_status);
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status);
+static void sata_dwc_port_stop(struct ata_port *ap);
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq);
+static void dma_dwc_exit(struct sata_dwc_device *hsdev);
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+			      struct lli *lli, dma_addr_t dma_lli,
+			      void __iomem *addr, int dir);
+static void dma_dwc_xfer_start(int dma_ch);
+
+static void sata_dwc_tf_dump(struct ata_taskfile *tf)
+{
+	dev_vdbg(host_pvt.dwc_dev, "taskfile cmd: 0x%02x protocol: %s flags:"
+		"0x%lx device: %x\n", tf->command, ata_get_cmd_descript\
+		(tf->protocol), tf->flags, tf->device);
+	dev_vdbg(host_pvt.dwc_dev, "feature: 0x%02x nsect: 0x%x lbal: 0x%x "
+		"lbam: 0x%x lbah: 0x%x\n", tf->feature, tf->nsect, tf->lbal,
+		 tf->lbam, tf->lbah);
+	dev_vdbg(host_pvt.dwc_dev, "hob_feature: 0x%02x hob_nsect: 0x%x "
+		"hob_lbal: 0x%x hob_lbam: 0x%x hob_lbah: 0x%x\n",
+		tf->hob_feature, tf->hob_nsect, tf->hob_lbal, tf->hob_lbam,
+		tf->hob_lbah);
+}
+
+/*
+ * Function: get_burst_length_encode
+ * arguments: datalength: length in bytes of data
+ * returns value to be programmed in register corrresponding to data length
+ * This value is effectively the log(base 2) of the length
+ */
+static  int get_burst_length_encode(int datalength)
+{
+	int items = datalength >> 2;	/* div by 4 to get lword count */
+
+	if (items >= 64)
+		return 5;
+
+	if (items >= 32)
+		return 4;
+
+	if (items >= 16)
+		return 3;
+
+	if (items >= 8)
+		return 2;
+
+	if (items >= 4)
+		return 1;
+
+	return 0;
+}
+
+static  void clear_chan_interrupts(int c)
+{
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.tfr.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.block.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.srctran.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.dsttran.low),
+		 DMA_CHANNEL(c));
+	out_le32(&(host_pvt.sata_dma_regs->interrupt_clear.error.low),
+		 DMA_CHANNEL(c));
+}
+
+/*
+ * Function: dma_request_channel
+ * arguments: None
+ * returns channel number if available else -1
+ * This function assigns the next available DMA channel from the list to the
+ * requester
+ */
+static int dma_request_channel(void)
+{
+	int i;
+
+	for (i = 0; i < DMA_NUM_CHANS; i++) {
+		if (!(in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) &\
+			DMA_CHANNEL(i)))
+			return i;
+	}
+	dev_err(host_pvt.dwc_dev, "%s NO channel chan_en: 0x%08x\n", __func__,
+		in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)));
+	return -1;
+}
+
+/*
+ * Function: dma_dwc_interrupt
+ * arguments: irq, dev_id, pt_regs
+ * returns channel number if available else -1
+ * Interrupt Handler for DW AHB SATA DMA
+ */
+static irqreturn_t dma_dwc_interrupt(int irq, void *hsdev_instance)
+{
+	int chan;
+	u32 tfr_reg, err_reg;
+	unsigned long flags;
+	struct sata_dwc_device *hsdev =
+		(struct sata_dwc_device *)hsdev_instance;
+	struct ata_host *host = (struct ata_host *)hsdev->host;
+	struct ata_port *ap;
+	struct sata_dwc_device_port *hsdevp;
+	u8 tag = 0;
+	unsigned int port = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+	ap = host->ports[port];
+	hsdevp = HSDEVP_FROM_AP(ap);
+	tag = ap->link.active_tag;
+
+	tfr_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.tfr\
+			.low));
+	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error\
+			.low));
+
+	dev_dbg(ap->dev, "eot=0x%08x err=0x%08x pending=%d active port=%d\n",
+		tfr_reg, err_reg, hsdevp->dma_pending[tag], port);
+
+	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+		/* Check for end-of-transfer interrupt. */
+		if (tfr_reg & DMA_CHANNEL(chan)) {
+			/*
+			 * Each DMA command produces 2 interrupts.  Only
+			 * complete the command after both interrupts have been
+			 * seen. (See sata_dwc_isr())
+			 */
+			host_pvt.dma_interrupt_count++;
+			sata_dwc_clear_dmacr(hsdevp, tag);
+
+			if (hsdevp->dma_pending[tag] ==
+			    SATA_DWC_DMA_PENDING_NONE) {
+				dev_err(ap->dev, "DMA not pending eot=0x%08x "
+					"err=0x%08x tag=0x%02x pending=%d\n",
+					tfr_reg, err_reg, tag,
+					hsdevp->dma_pending[tag]);
+			}
+
+			if ((host_pvt.dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+
+			/* Clear the interrupt */
+			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
+				.tfr.low),
+				 DMA_CHANNEL(chan));
+		}
+
+		/* Check for error interrupt. */
+		if (err_reg & DMA_CHANNEL(chan)) {
+			/* TODO Need error handler ! */
+			dev_err(ap->dev, "error interrupt err_reg=0x%08x\n",
+				err_reg);
+
+			/* Clear the interrupt. */
+			out_le32(&(host_pvt.sata_dma_regs->interrupt_clear\
+				.error.low),
+				 DMA_CHANNEL(chan));
+		}
+	}
+	spin_unlock_irqrestore(&host->lock, flags);
+	return IRQ_HANDLED;
+}
+
+/*
+ * Function: dma_request_interrupts
+ * arguments: hsdev
+ * returns status
+ * This function registers ISR for a particular DMA channel interrupt
+ */
+static int dma_request_interrupts(struct sata_dwc_device *hsdev, int irq)
+{
+	int retval = 0;
+	int chan;
+
+	for (chan = 0; chan < DMA_NUM_CHANS; chan++) {
+		/* Unmask error interrupt */
+		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.error.low,
+			 DMA_ENABLE_CHAN(chan));
+
+		/* Unmask end-of-transfer interrupt */
+		out_le32(&(host_pvt.sata_dma_regs)->interrupt_mask.tfr.low,
+			 DMA_ENABLE_CHAN(chan));
+	}
+
+	retval = request_irq(irq, dma_dwc_interrupt, 0, "SATA DMA", hsdev);
+	if (retval) {
+		dev_err(host_pvt.dwc_dev, "%s: could not get IRQ %d\n",
+		__func__, irq);
+		return -ENODEV;
+	}
+
+	/* Mark this interrupt as requested */
+	hsdev->irq_dma = irq;
+	return 0;
+}
+
+/*
+ * Function: map_sg_to_lli
+ * The Synopsis driver has a comment proposing that better performance
+ * is possible by only enabling interrupts on the last item in the linked list.
+ * However, it seems that could be a problem if an error happened on one of the
+ * first items.  The transfer would halt, but no error interrupt would occur.
+ * Currently this function sets interrupts enabled for each linked list item:
+ * DMA_CTL_INT_EN.
+ */
+static int map_sg_to_lli(struct scatterlist *sg, int num_elems,
+			struct lli *lli, dma_addr_t dma_lli,
+			void __iomem *dmadr_addr, int dir)
+{
+	int i, idx = 0;
+	int fis_len = 0;
+	dma_addr_t next_llp;
+	int bl;
+
+	dev_dbg(host_pvt.dwc_dev, "%s: sg=%p nelem=%d lli=%p dma_lli=0x%08x"
+		" dmadr=0x%08x\n", __func__, sg, num_elems, lli, (u32)dma_lli,
+		(u32)dmadr_addr);
+
+	bl = get_burst_length_encode(AHB_DMA_BRST_DFLT);
+
+	for (i = 0; i < num_elems; i++, sg++) {
+		u32 addr, offset;
+		u32 sg_len, len;
+
+		addr = (u32) sg_dma_address(sg);
+		sg_len = sg_dma_len(sg);
+
+		dev_dbg(host_pvt.dwc_dev, "%s: elem=%d sg_addr=0x%x sg_len"
+			"=%d\n", __func__, i, addr, sg_len);
+
+		while (sg_len) {
+			if (idx >= SATA_DWC_DMAC_LLI_NUM) {
+				/* The LLI table is not large enough. */
+				dev_err(host_pvt.dwc_dev, "LLI table overrun "
+				"(idx=%d)\n", idx);
+				break;
+			}
+			len = (sg_len > SATA_DWC_DMAC_CTRL_TSIZE_MAX) ?
+				SATA_DWC_DMAC_CTRL_TSIZE_MAX : sg_len;
+
+			offset = addr & 0xffff;
+			if ((offset + sg_len) > 0x10000)
+				len = 0x10000 - offset;
+
+			/*
+			 * Make sure a LLI block is not created that will span
+			 * 8K max FIS boundary.  If the block spans such a FIS
+			 * boundary, there is a chance that a DMA burst will
+			 * cross that boundary -- this results in an error in
+			 * the host controller.
+			 */
+			if (fis_len + len > 8192) {
+				dev_dbg(host_pvt.dwc_dev, "SPLITTING: fis_len="
+					"%d(0x%x) len=%d(0x%x)\n", fis_len,
+					 fis_len, len, len);
+				len = 8192 - fis_len;
+				fis_len = 0;
+			} else {
+				fis_len += len;
+			}
+			if (fis_len == 8192)
+				fis_len = 0;
+
+			/*
+			 * Set DMA addresses and lower half of control register
+			 * based on direction.
+			 */
+			if (dir == DMA_FROM_DEVICE) {
+				lli[idx].dar = cpu_to_le32(addr);
+				lli[idx].sar = cpu_to_le32((u32)dmadr_addr);
+
+				lli[idx].ctl.low = cpu_to_le32(
+					DMA_CTL_TTFC(DMA_CTL_TTFC_P2M_DMAC) |
+					DMA_CTL_SMS(0) |
+					DMA_CTL_DMS(1) |
+					DMA_CTL_SRC_MSIZE(bl) |
+					DMA_CTL_DST_MSIZE(bl) |
+					DMA_CTL_SINC_NOCHANGE |
+					DMA_CTL_SRC_TRWID(2) |
+					DMA_CTL_DST_TRWID(2) |
+					DMA_CTL_INT_EN |
+					DMA_CTL_LLP_SRCEN |
+					DMA_CTL_LLP_DSTEN);
+			} else {	/* DMA_TO_DEVICE */
+				lli[idx].sar = cpu_to_le32(addr);
+				lli[idx].dar = cpu_to_le32((u32)dmadr_addr);
+
+				lli[idx].ctl.low = cpu_to_le32(
+					DMA_CTL_TTFC(DMA_CTL_TTFC_M2P_PER) |
+					DMA_CTL_SMS(1) |
+					DMA_CTL_DMS(0) |
+					DMA_CTL_SRC_MSIZE(bl) |
+					DMA_CTL_DST_MSIZE(bl) |
+					DMA_CTL_DINC_NOCHANGE |
+					DMA_CTL_SRC_TRWID(2) |
+					DMA_CTL_DST_TRWID(2) |
+					DMA_CTL_INT_EN |
+					DMA_CTL_LLP_SRCEN |
+					DMA_CTL_LLP_DSTEN);
+			}
+
+			dev_dbg(host_pvt.dwc_dev, "%s setting ctl.high len: "
+				"0x%08x val: 0x%08x\n", __func__,
+				len, DMA_CTL_BLK_TS(len / 4));
+
+			/* Program the LLI CTL high register */
+			lli[idx].ctl.high = cpu_to_le32(DMA_CTL_BLK_TS\
+						(len / 4));
+
+			/* Program the next pointer.  The next pointer must be
+			 * the physical address, not the virtual address.
+			 */
+			next_llp = (dma_lli + ((idx + 1) * sizeof(struct \
+							lli)));
+
+			/* The last 2 bits encode the list master select. */
+			next_llp = DMA_LLP_LMS(next_llp, DMA_LLP_AHBMASTER2);
+
+			lli[idx].llp = cpu_to_le32(next_llp);
+			idx++;
+			sg_len -= len;
+			addr += len;
+		}
+	}
+
+	/*
+	 * The last next ptr has to be zero and the last control low register
+	 * has to have LLP_SRC_EN and LLP_DST_EN (linked list pointer source
+	 * and destination enable) set back to 0 (disabled.) This is what tells
+	 * the core that this is the last item in the linked list.
+	 */
+	if (idx) {
+		lli[idx-1].llp = 0x00000000;
+		lli[idx-1].ctl.low &= DMA_CTL_LLP_DISABLE_LE32;
+
+		/* Flush cache to memory */
+		dma_cache_sync(NULL, lli, (sizeof(struct lli) * idx),
+			       DMA_BIDIRECTIONAL);
+	}
+
+	return idx;
+}
+
+/*
+ * Function: dma_dwc_xfer_start
+ * arguments: Channel number
+ * Return : None
+ * Enables the DMA channel
+ */
+static void dma_dwc_xfer_start(int dma_ch)
+{
+	/* Enable the DMA channel */
+	out_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low),
+		 in_le32(&(host_pvt.sata_dma_regs->dma_chan_en.low)) |
+		 DMA_ENABLE_CHAN(dma_ch));
+}
+
+static int dma_dwc_xfer_setup(struct scatterlist *sg, int num_elems,
+			      struct lli *lli, dma_addr_t dma_lli,
+			      void __iomem *addr, int dir)
+{
+	int dma_ch;
+	int num_lli;
+	/* Acquire DMA channel */
+	dma_ch = dma_request_channel();
+	if (dma_ch == -1) {
+		dev_err(host_pvt.dwc_dev, "%s: dma channel unavailable\n",
+			 __func__);
+		return -EAGAIN;
+	}
+
+	/* Convert SG list to linked list of items (LLIs) for AHB DMA */
+	num_lli = map_sg_to_lli(sg, num_elems, lli, dma_lli, addr, dir);
+
+	dev_dbg(host_pvt.dwc_dev, "%s sg: 0x%p, count: %d lli: %p dma_lli:"
+		" 0x%0xlx addr: %p lli count: %d\n", __func__, sg, num_elems,
+		 lli, (u32)dma_lli, addr, num_lli);
+
+	clear_chan_interrupts(dma_ch);
+
+	/* Program the CFG register. */
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.high),
+		 DMA_CFG_PROTCTL | DMA_CFG_FCMOD_REQ);
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].cfg.low), 0);
+
+	/* Program the address of the linked list */
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].llp.low),
+		 DMA_LLP_LMS(dma_lli, DMA_LLP_AHBMASTER2));
+
+	/* Program the CTL register with src enable / dst enable */
+	out_le32(&(host_pvt.sata_dma_regs->chan_regs[dma_ch].ctl.low),
+		 DMA_CTL_LLP_SRCEN | DMA_CTL_LLP_DSTEN);
+	return 0;
+}
+
+/*
+ * Function: dma_dwc_exit
+ * arguments: None
+ * returns status
+ * This function exits the SATA DMA driver
+ */
+static void dma_dwc_exit(struct sata_dwc_device *hsdev)
+{
+	dev_dbg(host_pvt.dwc_dev, "%s:\n", __func__);
+	if (host_pvt.sata_dma_regs)
+		iounmap(host_pvt.sata_dma_regs);
+
+	if (hsdev->irq_dma)
+		free_irq(hsdev->irq_dma, hsdev);
+}
+
+/*
+ * Function: dma_dwc_init
+ * arguments: hsdev
+ * returns status
+ * This function initializes the SATA DMA driver
+ */
+static int dma_dwc_init(struct sata_dwc_device *hsdev, int irq)
+{
+	int err;
+
+	err = dma_request_interrupts(hsdev, irq);
+	if (err) {
+		dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
+			" %d\n", __func__, err);
+		goto error_out;
+	}
+
+	/* Enabe DMA */
+	out_le32(&(host_pvt.sata_dma_regs->dma_cfg.low), DMA_EN);
+
+	dev_notice(host_pvt.dwc_dev, "DMA initialized\n");
+	dev_dbg(host_pvt.dwc_dev, "SATA DMA registers=0x%p\n", host_pvt.\
+		sata_dma_regs);
+
+	return 0;
+
+error_out:
+	dma_dwc_exit(hsdev);
+
+	return err;
+}
+
+static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
+{
+	if (scr > SCR_NOTIFICATION) {
+		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+			__func__, scr);
+		return -EINVAL;
+	}
+
+	*val = in_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4));
+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+		__func__, link->ap->print_id, scr, *val);
+
+	return 0;
+}
+
+static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
+{
+	dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
+		__func__, link->ap->print_id, scr, val);
+	if (scr > SCR_NOTIFICATION) {
+		dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
+			 __func__, scr);
+		return -EINVAL;
+	}
+	out_le32((void *)link->ap->ioaddr.scr_addr + (scr * 4), val);
+
+	return 0;
+}
+
+static u32 core_scr_read(unsigned int scr)
+{
+	return in_le32((void __iomem *)(host_pvt.scr_addr_sstatus) +\
+			(scr * 4));
+}
+
+static void core_scr_write(unsigned int scr, u32 val)
+{
+	out_le32((void __iomem *)(host_pvt.scr_addr_sstatus) + (scr * 4),
+		val);
+}
+
+static void clear_serror(void)
+{
+	u32 val;
+	val = core_scr_read(SCR_ERROR);
+	core_scr_write(SCR_ERROR, val);
+
+}
+
+static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
+{
+	out_le32(&hsdev->sata_dwc_regs->intpr,
+		 in_le32(&hsdev->sata_dwc_regs->intpr));
+}
+
+static u32 qcmd_tag_to_mask(u8 tag)
+{
+	return 0x00000001 << (tag & 0x1f);
+}
+
+/* See ahci.c */
+static void sata_dwc_error_intr(struct ata_port *ap,
+				struct sata_dwc_device *hsdev, uint intpr)
+{
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	unsigned int err_mask = 0, action = 0;
+	struct ata_queued_cmd *qc;
+	u32 serror;
+	u8 status, tag;
+	u32 err_reg;
+
+	ata_ehi_clear_desc(ehi);
+
+	serror = core_scr_read(SCR_ERROR);
+	status = ap->ops->sff_check_status(ap);
+
+	err_reg = in_le32(&(host_pvt.sata_dma_regs->interrupt_status.error.\
+			low));
+	tag = ap->link.active_tag;
+
+	dev_err(ap->dev, "%s SCR_ERROR=0x%08x intpr=0x%08x status=0x%08x "
+		"dma_intp=%d pending=%d issued=%d dma_err_status=0x%08x\n",
+		__func__, serror, intpr, status, host_pvt.dma_interrupt_count,
+		hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag], err_reg);
+
+	/* Clear error register and interrupt bit */
+	clear_serror();
+	clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
+
+	/* This is the only error happening now.  TODO check for exact error */
+
+	err_mask |= AC_ERR_HOST_BUS;
+	action |= ATA_EH_RESET;
+
+	/* Pass this on to EH */
+	ehi->serror |= serror;
+	ehi->action |= action;
+
+	qc = ata_qc_from_tag(ap, tag);
+	if (qc)
+		qc->err_mask |= err_mask;
+	else
+		ehi->err_mask |= err_mask;
+
+	ata_port_abort(ap);
+}
+
+/*
+ * Function : sata_dwc_isr
+ * arguments : irq, void *dev_instance, struct pt_regs *regs
+ * Return value : irqreturn_t - status of IRQ
+ * This Interrupt handler called via port ops registered function.
+ * .irq_handler = sata_dwc_isr
+ */
+static irqreturn_t sata_dwc_isr(int irq, void *dev_instance)
+{
+	struct ata_host *host = (struct ata_host *)dev_instance;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_HOST(host);
+	struct ata_port *ap;
+	struct ata_queued_cmd *qc;
+	unsigned long flags;
+	u8 status, tag;
+	int handled, num_processed, port = 0;
+	uint intpr, sactive, sactive2, tag_mask;
+	struct sata_dwc_device_port *hsdevp;
+	host_pvt.sata_dwc_sactive_issued = 0;
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	/* Read the interrupt register */
+	intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
+
+	ap = host->ports[port];
+	hsdevp = HSDEVP_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s intpr=0x%08x active_tag=%d\n", __func__, intpr,
+		ap->link.active_tag);
+
+	/* Check for error interrupt */
+	if (intpr & SATA_DWC_INTPR_ERR) {
+		sata_dwc_error_intr(ap, hsdev, intpr);
+		handled = 1;
+		goto DONE;
+	}
+
+	/* Check for DMA SETUP FIS (FP DMA) interrupt */
+	if (intpr & SATA_DWC_INTPR_NEWFP) {
+		clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
+
+		tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
+		dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
+		if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
+			dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
+
+		host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
+
+		qc = ata_qc_from_tag(ap, tag);
+		/*
+		 * Start FP DMA for NCQ command.  At this point the tag is the
+		 * active tag.  It is the tag that matches the command about to
+		 * be completed.
+		 */
+		qc->ap->link.active_tag = tag;
+		sata_dwc_bmdma_start_by_tag(qc, tag);
+
+		handled = 1;
+		goto DONE;
+	}
+	sactive = core_scr_read(SCR_ACTIVE);
+	tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+
+	/* If no sactive issued and tag_mask is zero then this is not NCQ */
+	if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
+		if (ap->link.active_tag == ATA_TAG_POISON)
+			tag = 0;
+		else
+			tag = ap->link.active_tag;
+		qc = ata_qc_from_tag(ap, tag);
+
+		/* DEV interrupt w/ no active qc? */
+		if (unlikely(!qc || (qc->tf.flags & ATA_TFLAG_POLLING))) {
+			dev_err(ap->dev, "%s interrupt with no active qc "
+				"qc=%p\n", __func__, qc);
+			ap->ops->sff_check_status(ap);
+			handled = 1;
+			goto DONE;
+		}
+		status = ap->ops->sff_check_status(ap);
+
+		qc->ap->link.active_tag = tag;
+		hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+		if (status & ATA_ERR) {
+			dev_dbg(ap->dev, "interrupt ATA_ERR (0x%x)\n", status);
+			sata_dwc_qc_complete(ap, qc, 1);
+			handled = 1;
+			goto DONE;
+		}
+
+		dev_dbg(ap->dev, "%s non-NCQ cmd interrupt, protocol: %s\n",
+			__func__, ata_get_cmd_descript(qc->tf.protocol));
+DRVSTILLBUSY:
+		if (ata_is_dma(qc->tf.protocol)) {
+			/*
+			 * Each DMA transaction produces 2 interrupts. The DMAC
+			 * transfer complete interrupt and the SATA controller
+			 * operation done interrupt. The command should be
+			 * completed only after both interrupts are seen.
+			 */
+			host_pvt.dma_interrupt_count++;
+			if (hsdevp->dma_pending[tag] == \
+					SATA_DWC_DMA_PENDING_NONE) {
+				dev_err(ap->dev, "%s: DMA not pending "
+					"intpr=0x%08x status=0x%08x pending"
+					"=%d\n", __func__, intpr, status,
+					hsdevp->dma_pending[tag]);
+			}
+
+			if ((host_pvt.dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+		} else if (ata_is_pio(qc->tf.protocol)) {
+			ata_sff_hsm_move(ap, qc, status, 0);
+			handled = 1;
+			goto DONE;
+		} else {
+			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+				goto DRVSTILLBUSY;
+		}
+
+		handled = 1;
+		goto DONE;
+	}
+
+	/*
+	 * This is a NCQ command. At this point we need to figure out for which
+	 * tags we have gotten a completion interrupt.  One interrupt may serve
+	 * as completion for more than one operation when commands are queued
+	 * (NCQ).  We need to process each completed command.
+	 */
+
+	 /* process completed commands */
+	sactive = core_scr_read(SCR_ACTIVE);
+	tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
+
+	if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
+							tag_mask > 1) {
+		dev_dbg(ap->dev, "%s NCQ:sactive=0x%08x  sactive_issued=0x%08x"
+			"tag_mask=0x%08x\n", __func__, sactive,
+			host_pvt.sata_dwc_sactive_issued, tag_mask);
+	}
+
+	if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
+					(host_pvt.sata_dwc_sactive_issued)) {
+		dev_warn(ap->dev, "Bad tag mask?  sactive=0x%08x "
+			 "(host_pvt.sata_dwc_sactive_issued)=0x%08x  tag_mask"
+			 "=0x%08x\n", sactive, host_pvt.sata_dwc_sactive_issued,
+			  tag_mask);
+	}
+
+	/* read just to clear ... not bad if currently still busy */
+	status = ap->ops->sff_check_status(ap);
+	dev_dbg(ap->dev, "%s ATA status register=0x%x\n", __func__, status);
+
+	tag = 0;
+	num_processed = 0;
+	while (tag_mask) {
+		num_processed++;
+		while (!(tag_mask & 0x00000001)) {
+			tag++;
+			tag_mask <<= 1;
+		}
+
+		tag_mask &= (~0x00000001);
+		qc = ata_qc_from_tag(ap, tag);
+
+		/* To be picked up by completion functions */
+		qc->ap->link.active_tag = tag;
+		hsdevp->cmd_issued[tag] = SATA_DWC_CMD_ISSUED_NOT;
+
+		/* Let libata/scsi layers handle error */
+		if (status & ATA_ERR) {
+			dev_dbg(ap->dev, "%s ATA_ERR (0x%x)\n", __func__,
+				status);
+			sata_dwc_qc_complete(ap, qc, 1);
+			handled = 1;
+			goto DONE;
+		}
+
+		/* Process completed command */
+		dev_dbg(ap->dev, "%s NCQ command, protocol: %s\n", __func__,
+			ata_get_cmd_descript(qc->tf.protocol));
+		if (ata_is_dma(qc->tf.protocol)) {
+			host_pvt.dma_interrupt_count++;
+			if (hsdevp->dma_pending[tag] == \
+					SATA_DWC_DMA_PENDING_NONE)
+				dev_warn(ap->dev, "%s: DMA not pending?\n",
+					__func__);
+			if ((host_pvt.dma_interrupt_count % 2) == 0)
+				sata_dwc_dma_xfer_complete(ap, 1);
+		} else {
+			if (unlikely(sata_dwc_qc_complete(ap, qc, 1)))
+				goto STILLBUSY;
+		}
+		continue;
+
+STILLBUSY:
+		ap->stats.idle_irq++;
+		dev_warn(ap->dev, "STILL BUSY IRQ ata%d: irq trap\n",
+			ap->print_id);
+	} /* while tag_mask */
+
+	/*
+	 * Check to see if any commands completed while we were processing our
+	 * initial set of completed commands (read status clears interrupts,
+	 * so we might miss a completed command interrupt if one came in while
+	 * we were processing --we read status as part of processing a completed
+	 * command).
+	 */
+	sactive2 = core_scr_read(SCR_ACTIVE);
+	if (sactive2 != sactive) {
+		dev_dbg(ap->dev, "More completed - sactive=0x%x sactive2"
+			"=0x%x\n", sactive, sactive2);
+	}
+	handled = 1;
+
+DONE:
+	spin_unlock_irqrestore(&host->lock, flags);
+	return IRQ_RETVAL(handled);
+}
+
+static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
+{
+	struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
+
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			 SATA_DWC_DMACR_RX_CLEAR(
+				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+	} else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			 SATA_DWC_DMACR_TX_CLEAR(
+				 in_le32(&(hsdev->sata_dwc_regs->dmacr))));
+	} else {
+		/*
+		 * This should not happen, it indicates the driver is out of
+		 * sync.  If it does happen, clear dmacr anyway.
+		 */
+		dev_err(host_pvt.dwc_dev, "%s DMA protocol RX and"
+			"TX DMA not pending tag=0x%02x pending=%d"
+			" dmacr: 0x%08x\n", __func__, tag,
+			hsdevp->dma_pending[tag],
+			in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+		out_le32(&(hsdev->sata_dwc_regs->dmacr),
+			SATA_DWC_DMACR_TXRXCH_CLEAR);
+	}
+}
+
+static void sata_dwc_dma_xfer_complete(struct ata_port *ap, u32 check_status)
+{
+	struct ata_queued_cmd *qc;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	u8 tag = 0;
+
+	tag = ap->link.active_tag;
+	qc = ata_qc_from_tag(ap, tag);
+	if (!qc) {
+		dev_err(ap->dev, "failed to get qc");
+		return;
+	}
+
+#ifdef DEBUG_NCQ
+	if (tag > 0) {
+		dev_info(ap->dev, "%s tag=%u cmd=0x%02x dma dir=%s proto=%s "
+			 "dmacr=0x%08x\n", __func__, qc->tag, qc->tf.command,
+			 ata_get_cmd_descript(qc->dma_dir),
+			 ata_get_cmd_descript(qc->tf.protocol),
+			 in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+	}
+#endif
+
+	if (ata_is_dma(qc->tf.protocol)) {
+		if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_NONE) {
+			dev_err(ap->dev, "%s DMA protocol RX and TX DMA not "
+				"pending dmacr: 0x%08x\n", __func__,
+				in_le32(&(hsdev->sata_dwc_regs->dmacr)));
+		}
+
+		hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
+		sata_dwc_qc_complete(ap, qc, check_status);
+		ap->link.active_tag = ATA_TAG_POISON;
+	} else {
+		sata_dwc_qc_complete(ap, qc, check_status);
+	}
+}
+
+static int sata_dwc_qc_complete(struct ata_port *ap, struct ata_queued_cmd *qc,
+				u32 check_status)
+{
+	u8 status = 0;
+	u32 mask = 0x0;
+	u8 tag = qc->tag;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	host_pvt.sata_dwc_sactive_queued = 0;
+	dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
+
+	if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
+		dev_err(ap->dev, "TX DMA PENDING\n");
+	else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX)
+		dev_err(ap->dev, "RX DMA PENDING\n");
+	dev_dbg(ap->dev, "QC complete cmd=0x%02x status=0x%02x ata%u:"
+		" protocol=%d\n", qc->tf.command, status, ap->print_id,
+		 qc->tf.protocol);
+
+	/* clear active bit */
+	mask = (~(qcmd_tag_to_mask(tag)));
+	host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
+						& mask;
+	host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
+						& mask;
+	ata_qc_complete(qc);
+	return 0;
+}
+
+static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
+{
+	/* Enable selective interrupts by setting the interrupt maskregister*/
+	out_le32(&hsdev->sata_dwc_regs->intmr,
+		 SATA_DWC_INTMR_ERRM |
+		 SATA_DWC_INTMR_NEWFPM |
+		 SATA_DWC_INTMR_PMABRTM |
+		 SATA_DWC_INTMR_DMATM);
+	/*
+	 * Unmask the error bits that should trigger an error interrupt by
+	 * setting the error mask register.
+	 */
+	out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
+
+	dev_dbg(host_pvt.dwc_dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
+		 __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
+		in_le32(&hsdev->sata_dwc_regs->errmr));
+}
+
+static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
+{
+	port->cmd_addr = (void *)base + 0x00;
+	port->data_addr = (void *)base + 0x00;
+
+	port->error_addr = (void *)base + 0x04;
+	port->feature_addr = (void *)base + 0x04;
+
+	port->nsect_addr = (void *)base + 0x08;
+
+	port->lbal_addr = (void *)base + 0x0c;
+	port->lbam_addr = (void *)base + 0x10;
+	port->lbah_addr = (void *)base + 0x14;
+
+	port->device_addr = (void *)base + 0x18;
+	port->command_addr = (void *)base + 0x1c;
+	port->status_addr = (void *)base + 0x1c;
+
+	port->altstatus_addr = (void *)base + 0x20;
+	port->ctl_addr = (void *)base + 0x20;
+}
+
+/*
+ * Function : sata_dwc_port_start
+ * arguments : struct ata_ioports *port
+ * Return value : returns 0 if success, error code otherwise
+ * This function allocates the scatter gather LLI table for AHB DMA
+ */
+static int sata_dwc_port_start(struct ata_port *ap)
+{
+	int err = 0;
+	struct sata_dwc_device *hsdev;
+	struct sata_dwc_device_port *hsdevp = NULL;
+	struct device *pdev;
+	int i;
+
+	hsdev = HSDEV_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s: port_no=%d\n", __func__, ap->port_no);
+
+	hsdev->host = ap->host;
+	pdev = ap->host->dev;
+	if (!pdev) {
+		dev_err(ap->dev, "%s: no ap->host->dev\n", __func__);
+		err = -ENODEV;
+		goto CLEANUP;
+	}
+
+	/* Allocate Port Struct */
+	hsdevp = kzalloc(sizeof(*hsdevp), GFP_KERNEL);
+	if (!hsdevp) {
+		dev_err(ap->dev, "%s: kmalloc failed for hsdevp\n", __func__);
+		err = -ENOMEM;
+		goto CLEANUP;
+	}
+	hsdevp->hsdev = hsdev;
+
+	for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
+		hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
+
+	ap->bmdma_prd = 0;	/* set these so libata doesn't use them */
+	ap->bmdma_prd_dma = 0;
+
+	/*
+	 * DMA - Assign scatter gather LLI table. We can't use the libata
+	 * version since it's PRD is IDE PCI specific.
+	 */
+	for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+		hsdevp->llit[i] = dma_alloc_coherent(pdev,
+						     SATA_DWC_DMAC_LLI_TBL_SZ,
+						     &(hsdevp->llit_dma[i]),
+						     GFP_ATOMIC);
+		if (!hsdevp->llit[i]) {
+			dev_err(ap->dev, "%s: dma_alloc_coherent failed\n",
+				 __func__);
+			err = -ENOMEM;
+			goto CLEANUP;
+		}
+	}
+
+	if (ap->port_no == 0)  {
+		dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
+			__func__);
+		out_le32(&hsdev->sata_dwc_regs->dmacr,
+			 SATA_DWC_DMACR_TXRXCH_CLEAR);
+
+		dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
+			 __func__);
+		out_le32(&hsdev->sata_dwc_regs->dbtsr,
+			 (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
+			  SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
+	}
+
+	/* Clear any error bits before libata starts issuing commands */
+	clear_serror();
+	ap->private_data = hsdevp;
+
+CLEANUP:
+	if (err) {
+		sata_dwc_port_stop(ap);
+		dev_dbg(ap->dev, "%s: fail\n", __func__);
+	} else {
+		dev_dbg(ap->dev, "%s: done\n", __func__);
+	}
+
+	return err;
+}
+
+static void sata_dwc_port_stop(struct ata_port *ap)
+{
+	int i;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
+
+	if (hsdevp && hsdev) {
+		/* deallocate LLI table */
+		for (i = 0; i < SATA_DWC_QCMD_MAX; i++) {
+			dma_free_coherent(ap->host->dev,
+					  SATA_DWC_DMAC_LLI_TBL_SZ,
+					 hsdevp->llit[i], hsdevp->llit_dma[i]);
+		}
+
+		kfree(hsdevp);
+	}
+	ap->private_data = NULL;
+}
+
+/*
+ * Function : sata_dwc_exec_command_by_tag
+ * arguments : ata_port *ap, ata_taskfile *tf, u8 tag, u32 cmd_issued
+ * Return value : None
+ * This function keeps track of individual command tag ids and calls
+ * ata_exec_command in libata
+ */
+static void sata_dwc_exec_command_by_tag(struct ata_port *ap,
+					 struct ata_taskfile *tf,
+					 u8 tag, u32 cmd_issued)
+{
+	unsigned long flags;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+
+	dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
+		ata_get_cmd_descript(tf), tag);
+
+	spin_lock_irqsave(&ap->host->lock, flags);
+	hsdevp->cmd_issued[tag] = cmd_issued;
+	spin_unlock_irqrestore(&ap->host->lock, flags);
+	/*
+	 * Clear SError before executing a new command.
+	 * sata_dwc_scr_write and read can not be used here. Clearing the PM
+	 * managed SError register for the disk needs to be done before the
+	 * task file is loaded.
+	 */
+	clear_serror();
+	ata_sff_exec_command(ap, tf);
+}
+
+static void sata_dwc_bmdma_setup_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	sata_dwc_exec_command_by_tag(qc->ap, &qc->tf, tag,
+				     SATA_DWC_CMD_ISSUED_PEND);
+}
+
+static void sata_dwc_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	u8 tag = qc->tag;
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+			__func__, qc->ap->link.sactive, tag);
+	} else {
+		tag = 0;
+	}
+	sata_dwc_bmdma_setup_by_tag(qc, tag);
+}
+
+static void sata_dwc_bmdma_start_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	int start_dma;
+	u32 reg, dma_chan;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_QC(qc);
+	struct ata_port *ap = qc->ap;
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	int dir = qc->dma_dir;
+	dma_chan = hsdevp->dma_chan[tag];
+
+	if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_NOT) {
+		start_dma = 1;
+		if (dir == DMA_TO_DEVICE)
+			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_TX;
+		else
+			hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_RX;
+	} else {
+		dev_err(ap->dev, "%s: Command not pending cmd_issued=%d "
+			"(tag=%d) DMA NOT started\n", __func__,
+			hsdevp->cmd_issued[tag], tag);
+		start_dma = 0;
+	}
+
+	dev_dbg(ap->dev, "%s qc=%p tag: %x cmd: 0x%02x dma_dir: %s "
+		"start_dma? %x\n", __func__, qc, tag, qc->tf.command,
+		ata_get_cmd_descript(qc->dma_dir), start_dma);
+	sata_dwc_tf_dump(&(qc->tf));
+
+	if (start_dma) {
+		reg = core_scr_read(SCR_ERROR);
+		if (reg & SATA_DWC_SERROR_ERR_BITS) {
+			dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
+				__func__, reg);
+		}
+
+		if (dir == DMA_TO_DEVICE)
+			out_le32(&hsdev->sata_dwc_regs->dmacr,
+				SATA_DWC_DMACR_TXCHEN);
+		else
+			out_le32(&hsdev->sata_dwc_regs->dmacr,
+				SATA_DWC_DMACR_RXCHEN);
+
+		/* Enable AHB DMA transfer on the specified channel */
+		dma_dwc_xfer_start(dma_chan);
+	}
+}
+
+static void sata_dwc_bmdma_start(struct ata_queued_cmd *qc)
+{
+	u8 tag = qc->tag;
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		dev_dbg(qc->ap->dev, "%s: ap->link.sactive=0x%08x tag=%d\n",
+			__func__, qc->ap->link.sactive, tag);
+	} else {
+		tag = 0;
+	}
+	dev_dbg(qc->ap->dev, "%s\n", __func__);
+	sata_dwc_bmdma_start_by_tag(qc, tag);
+}
+
+/*
+ * Function : sata_dwc_qc_prep_by_tag
+ * arguments : ata_queued_cmd *qc, u8 tag
+ * Return value : None
+ * qc_prep for a particular queued command based on tag
+ */
+static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
+{
+	struct scatterlist *sg = qc->sg;
+	struct ata_port *ap = qc->ap;
+	u32 dma_chan;
+	struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
+	struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
+	int err;
+
+	dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
+		__func__, ap->port_no, ata_get_cmd_descript(qc->dma_dir),
+		 qc->n_elem);
+
+	dma_chan = dma_dwc_xfer_setup(sg, qc->n_elem, hsdevp->llit[tag],
+				      hsdevp->llit_dma[tag],
+				      (void *__iomem)(&hsdev->sata_dwc_regs->\
+				      dmadr), qc->dma_dir);
+	if (dma_chan < 0) {
+		dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns err %d\n",
+			__func__, err);
+		return;
+	}
+	hsdevp->dma_chan[tag] = dma_chan;
+}
+
+static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
+{
+	u32 sactive;
+	u8 tag = qc->tag;
+	struct ata_port *ap = qc->ap;
+
+#ifdef DEBUG_NCQ
+	if (qc->tag > 0 || ap->link.sactive > 1)
+		dev_info(ap->dev, "%s ap id=%d cmd(0x%02x)=%s qc tag=%d "
+			 "prot=%s ap active_tag=0x%08x ap sactive=0x%08x\n",
+			 __func__, ap->print_id, qc->tf.command,
+			 ata_get_cmd_descript(&qc->tf),
+			 qc->tag, ata_get_cmd_descript(qc->tf.protocol),
+			 ap->link.active_tag, ap->link.sactive);
+#endif
+
+	if (!ata_is_ncq(qc->tf.protocol))
+		tag = 0;
+	sata_dwc_qc_prep_by_tag(qc, tag);
+
+	if (ata_is_ncq(qc->tf.protocol)) {
+		sactive = core_scr_read(SCR_ACTIVE);
+		sactive |= (0x00000001 << tag);
+		core_scr_write(SCR_ACTIVE, sactive);
+
+		dev_dbg(qc->ap->dev, "%s: tag=%d ap->link.sactive = 0x%08x "
+			"sactive=0x%08x\n", __func__, tag, qc->ap->link.sactive,
+			sactive);
+
+		ap->ops->sff_tf_load(ap, &qc->tf);
+		sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
+					     SATA_DWC_CMD_ISSUED_PEND);
+	} else {
+		ata_sff_qc_issue(qc);
+	}
+	return 0;
+}
+
+/*
+ * Function : sata_dwc_qc_prep
+ * arguments : ata_queued_cmd *qc
+ * Return value : None
+ * qc_prep for a particular queued command
+ */
+
+static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
+{
+	if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
+		return;
+
+#ifdef DEBUG_NCQ
+	if (qc->tag > 0)
+		dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
+			 __func__, tag, qc->ap->link.active_tag);
+
+	return ;
+#endif
+}
+
+static void sata_dwc_error_handler(struct ata_port *ap)
+{
+	ap->link.flags |= ATA_LFLAG_NO_HRST;
+	ata_sff_error_handler(ap);
+}
+
+/*
+ * scsi mid-layer and libata interface structures
+ */
+static struct scsi_host_template sata_dwc_sht = {
+	ATA_NCQ_SHT(DRV_NAME),
+	/*
+	 * test-only: Currently this driver doesn't handle NCQ
+	 * correctly. We enable NCQ but set the queue depth to a
+	 * max of 1. This will get fixed in in a future release.
+	 */
+	.sg_tablesize		= LIBATA_MAX_PRD,
+	.can_queue		= ATA_DEF_QUEUE,	/* ATA_MAX_QUEUE */
+	.dma_boundary		= ATA_DMA_BOUNDARY,
+};
+
+static struct ata_port_operations sata_dwc_ops = {
+	.inherits		= &ata_sff_port_ops,
+
+	.error_handler		= sata_dwc_error_handler,
+
+	.qc_prep		= sata_dwc_qc_prep,
+	.qc_issue		= sata_dwc_qc_issue,
+
+	.scr_read		= sata_dwc_scr_read,
+	.scr_write		= sata_dwc_scr_write,
+
+	.port_start		= sata_dwc_port_start,
+	.port_stop		= sata_dwc_port_stop,
+
+	.bmdma_setup		= sata_dwc_bmdma_setup,
+	.bmdma_start		= sata_dwc_bmdma_start,
+};
+
+static const struct ata_port_info sata_dwc_port_info[] = {
+	{
+		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
+				  ATA_FLAG_MMIO | ATA_FLAG_NCQ,
+		.pio_mask	= 0x1f,	/* pio 0-4 */
+		.udma_mask	= ATA_UDMA6,
+		.port_ops	= &sata_dwc_ops,
+	},
+};
+
+static int sata_dwc_probe(struct of_device *ofdev,
+			const struct of_device_id *match)
+{
+	struct sata_dwc_device *hsdev;
+	u32 idr, versionr;
+	char *ver = (char *)&versionr;
+	u8 *base = NULL;
+	int err = 0;
+	int irq, rc;
+	struct ata_host *host;
+	struct ata_port_info pi = sata_dwc_port_info[0];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+
+	/* Allocate DWC SATA device */
+	hsdev = kmalloc(sizeof(*hsdev), GFP_KERNEL);
+	if (hsdev == NULL) {
+		dev_err(&ofdev->dev, "kmalloc failed for hsdev\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+	memset(hsdev, 0, sizeof(*hsdev));
+
+	/* Ioremap SATA registers */
+	base = of_iomap(ofdev->dev.of_node, 0);
+	if (!base) {
+		dev_err(&ofdev->dev, "ioremap failed for SATA register"
+			" address\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+	hsdev->reg_base = base;
+	dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
+
+	/* Synopsys DWC SATA specific Registers */
+	hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
+
+	/* Allocate and fill host */
+	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
+	if (!host) {
+		dev_err(&ofdev->dev, "ata_host_alloc_pinfo failed\n");
+		err = -ENOMEM;
+		goto error_out;
+	}
+
+	host->private_data = hsdev;
+
+	/* Setup port */
+	host->ports[0]->ioaddr.cmd_addr = base;
+	host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
+	host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
+	sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
+
+	/* Read the ID and Version Registers */
+	idr = in_le32(&hsdev->sata_dwc_regs->idr);
+	versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
+	dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
+		   idr, ver[0], ver[1], ver[2]);
+
+	/* Get SATA DMA interrupt number */
+	irq = irq_of_parse_and_map(ofdev->dev.of_node, 1);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no SATA DMA irq\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/* Get physical SATA DMA register base address */
+	host_pvt.sata_dma_regs = of_iomap(ofdev->dev.of_node, 1);
+	if (!(host_pvt.sata_dma_regs)) {
+		dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
+			" address\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/* Save dev for later use in dev_xxx() routines */
+	host_pvt.dwc_dev = &ofdev->dev;
+
+	/* Initialize AHB DMAC */
+	dma_dwc_init(hsdev, irq);
+
+	/* Enable SATA Interrupts */
+	sata_dwc_enable_interrupts(hsdev);
+
+	/* Get SATA interrupt number */
+	irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
+	if (irq == NO_IRQ) {
+		dev_err(&ofdev->dev, "no SATA DMA irq\n");
+		err = -ENODEV;
+		goto error_out;
+	}
+
+	/*
+	 * Now, register with libATA core, this will also initiate the
+	 * device discovery process, invoking our port_start() handler &
+	 * error_handler() to execute a dummy Softreset EH session
+	 */
+	rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+
+	if (rc != 0)
+		dev_err(&ofdev->dev, "failed to activate host");
+
+	dev_set_drvdata(&ofdev->dev, host);
+	return 0;
+
+error_out:
+	/* Free SATA DMA resources */
+	dma_dwc_exit(hsdev);
+
+	if (base)
+		iounmap(base);
+	return err;
+}
+
+static int sata_dwc_remove(struct of_device *ofdev)
+{
+	struct device *dev = &ofdev->dev;
+	struct ata_host *host = dev_get_drvdata(dev);
+	struct sata_dwc_device *hsdev = host->private_data;
+
+	ata_host_detach(host);
+	dev_set_drvdata(dev, NULL);
+
+	/* Free SATA DMA resources */
+	dma_dwc_exit(hsdev);
+
+	iounmap(hsdev->reg_base);
+	kfree(hsdev);
+	kfree(host);
+	dev_dbg(&ofdev->dev, "done\n");
+	return 0;
+}
+
+static const struct of_device_id sata_dwc_match[] = {
+	{ .compatible = "amcc,sata-460ex", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, sata_dwc_match);
+
+static struct of_platform_driver sata_dwc_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.owner = THIS_MODULE,
+		.of_match_table = sata_dwc_match,
+	},
+	.probe = sata_dwc_probe,
+	.remove = sata_dwc_remove,
+};
+
+static int __init sata_dwc_init(void)
+{
+	return	of_register_platform_driver(&sata_dwc_driver);
+}
+
+static void __exit sata_dwc_exit(void)
+{
+	of_unregister_platform_driver(&sata_dwc_driver);
+}
+
+module_init(sata_dwc_init);
+module_exit(sata_dwc_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Miesfeld <mmiesfeld@amcc.com>");
+MODULE_DESCRIPTION("DesignWare Cores SATA controller low lever driver");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 61c89b5..18c986d 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1096,7 +1096,7 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 {
 	struct sata_fsl_host_priv *host_priv = ap->host->private_data;
 	void __iomem *hcr_base = host_priv->hcr_base;
-	u32 hstatus, qc_active = 0;
+	u32 hstatus, done_mask = 0;
 	struct ata_queued_cmd *qc;
 	u32 SError;
 
@@ -1116,28 +1116,28 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 	}
 
 	/* Read command completed register */
-	qc_active = ioread32(hcr_base + CC);
+	done_mask = ioread32(hcr_base + CC);
 
 	VPRINTK("Status of all queues :\n");
-	VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
-		qc_active,
+	VPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n",
+		done_mask,
 		ioread32(hcr_base + CA),
 		ioread32(hcr_base + CE),
 		ioread32(hcr_base + CQ),
 		ap->qc_active);
 
-	if (qc_active & ap->qc_active) {
+	if (done_mask & ap->qc_active) {
 		int i;
 		/* clear CC bit, this will also complete the interrupt */
-		iowrite32(qc_active, hcr_base + CC);
+		iowrite32(done_mask, hcr_base + CC);
 
 		DPRINTK("Status of all queues :\n");
-		DPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
-			qc_active, ioread32(hcr_base + CA),
+		DPRINTK("done_mask/CC = 0x%x, CA = 0x%x, CE=0x%x\n",
+			done_mask, ioread32(hcr_base + CA),
 			ioread32(hcr_base + CE));
 
 		for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) {
-			if (qc_active & (1 << i)) {
+			if (done_mask & (1 << i)) {
 				qc = ata_qc_from_tag(ap, i);
 				if (qc) {
 					ata_qc_complete(qc);
@@ -1164,7 +1164,7 @@ static void sata_fsl_host_intr(struct ata_port *ap)
 		/* Spurious Interrupt!! */
 		DPRINTK("spurious interrupt!!, CC = 0x%x\n",
 			ioread32(hcr_base + CC));
-		iowrite32(qc_active, hcr_base + CC);
+		iowrite32(done_mask, hcr_base + CC);
 		return;
 	}
 }
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a476cd9..9463c71 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2716,34 +2716,35 @@ static void mv_err_intr(struct ata_port *ap)
 static void mv_process_crpb_response(struct ata_port *ap,
 		struct mv_crpb *response, unsigned int tag, int ncq_enabled)
 {
+	u8 ata_status;
+	u16 edma_status = le16_to_cpu(response->flags);
 	struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
 
-	if (qc) {
-		u8 ata_status;
-		u16 edma_status = le16_to_cpu(response->flags);
-		/*
-		 * edma_status from a response queue entry:
-		 *   LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
-		 *   MSB is saved ATA status from command completion.
-		 */
-		if (!ncq_enabled) {
-			u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
-			if (err_cause) {
-				/*
-				 * Error will be seen/handled by mv_err_intr().
-				 * So do nothing at all here.
-				 */
-				return;
-			}
-		}
-		ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
-		if (!ac_err_mask(ata_status))
-			ata_qc_complete(qc);
-		/* else: leave it for mv_err_intr() */
-	} else {
+	if (unlikely(!qc)) {
 		ata_port_printk(ap, KERN_ERR, "%s: no qc for tag=%d\n",
 				__func__, tag);
+		return;
+	}
+
+	/*
+	 * edma_status from a response queue entry:
+	 *   LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
+	 *   MSB is saved ATA status from command completion.
+	 */
+	if (!ncq_enabled) {
+		u8 err_cause = edma_status & 0xff & ~EDMA_ERR_DEV;
+		if (err_cause) {
+			/*
+			 * Error will be seen/handled by
+			 * mv_err_intr().  So do nothing at all here.
+			 */
+			return;
+		}
 	}
+	ata_status = edma_status >> CRPB_FLAG_STATUS_SHIFT;
+	if (!ac_err_mask(ata_status))
+		ata_qc_complete(qc);
+	/* else: leave it for mv_err_intr() */
 }
 
 static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp)
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 2116113..cb89ef8 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1018,7 +1018,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 			      NV_ADMA_STAT_CPBERR |
 			      NV_ADMA_STAT_CMD_COMPLETE)) {
 			u32 check_commands = notifier_clears[i];
-			int pos, error = 0;
+			int pos, rc;
 
 			if (status & NV_ADMA_STAT_CPBERR) {
 				/* check all active commands */
@@ -1030,10 +1030,12 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
 			}
 
 			/* check CPBs for completed commands */
-			while ((pos = ffs(check_commands)) && !error) {
+			while ((pos = ffs(check_commands))) {
 				pos--;
-				error = nv_adma_check_cpb(ap, pos,
+				rc = nv_adma_check_cpb(ap, pos,
 						notifier_error & (1 << pos));
+				if (unlikely(rc))
+					check_commands = 0;
 				check_commands &= ~(1 << pos);
 			}
 		}
@@ -2129,7 +2131,6 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 	struct nv_swncq_port_priv *pp = ap->private_data;
 	struct ata_eh_info *ehi = &ap->link.eh_info;
 	u32 sactive;
-	int nr_done = 0;
 	u32 done_mask;
 	int i;
 	u8 host_stat;
@@ -2170,22 +2171,21 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 			pp->dhfis_bits &= ~(1 << i);
 			pp->dmafis_bits &= ~(1 << i);
 			pp->sdbfis_bits |= (1 << i);
-			nr_done++;
 		}
 	}
 
 	if (!ap->qc_active) {
 		DPRINTK("over\n");
 		nv_swncq_pp_reinit(ap);
-		return nr_done;
+		return 0;
 	}
 
 	if (pp->qc_active & pp->dhfis_bits)
-		return nr_done;
+		return 0;
 
 	if ((pp->ncq_flags & ncq_saw_backout) ||
 	    (pp->qc_active ^ pp->dhfis_bits))
-		/* if the controller cann't get a device to host register FIS,
+		/* if the controller can't get a device to host register FIS,
 		 * The driver needs to reissue the new command.
 		 */
 		lack_dhfis = 1;
@@ -2202,7 +2202,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 	if (lack_dhfis) {
 		qc = ata_qc_from_tag(ap, pp->last_issue_tag);
 		nv_swncq_issue_atacmd(ap, qc);
-		return nr_done;
+		return 0;
 	}
 
 	if (pp->defer_queue.defer_bits) {
@@ -2212,7 +2212,7 @@ static int nv_swncq_sdbfis(struct ata_port *ap)
 		nv_swncq_issue_atacmd(ap, qc);
 	}
 
-	return nr_done;
+	return 0;
 }
 
 static inline u32 nv_swncq_tag(struct ata_port *ap)
@@ -2224,7 +2224,7 @@ static inline u32 nv_swncq_tag(struct ata_port *ap)
 	return (tag & 0x1f);
 }
 
-static int nv_swncq_dmafis(struct ata_port *ap)
+static void nv_swncq_dmafis(struct ata_port *ap)
 {
 	struct ata_queued_cmd *qc;
 	unsigned int rw;
@@ -2239,7 +2239,7 @@ static int nv_swncq_dmafis(struct ata_port *ap)
 	qc = ata_qc_from_tag(ap, tag);
 
 	if (unlikely(!qc))
-		return 0;
+		return;
 
 	rw = qc->tf.flags & ATA_TFLAG_WRITE;
 
@@ -2254,8 +2254,6 @@ static int nv_swncq_dmafis(struct ata_port *ap)
 		dmactl |= ATA_DMA_WR;
 
 	iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD);
-
-	return 1;
 }
 
 static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
@@ -2265,7 +2263,6 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 	struct ata_eh_info *ehi = &ap->link.eh_info;
 	u32 serror;
 	u8 ata_stat;
-	int rc = 0;
 
 	ata_stat = ap->ops->sff_check_status(ap);
 	nv_swncq_irq_clear(ap, fis);
@@ -2310,8 +2307,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 			"dhfis 0x%X dmafis 0x%X sactive 0x%X\n",
 			ap->print_id, pp->qc_active, pp->dhfis_bits,
 			pp->dmafis_bits, readl(pp->sactive_block));
-		rc = nv_swncq_sdbfis(ap);
-		if (rc < 0)
+		if (nv_swncq_sdbfis(ap) < 0)
 			goto irq_error;
 	}
 
@@ -2348,7 +2344,7 @@ static void nv_swncq_host_interrupt(struct ata_port *ap, u16 fis)
 		 */
 		pp->dmafis_bits |= (0x1 << nv_swncq_tag(ap));
 		pp->ncq_flags |= ncq_saw_dmas;
-		rc = nv_swncq_dmafis(ap);
+		nv_swncq_dmafis(ap);
 	}
 
 irq_exit:
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index 477345d..a0c20d9 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1459,6 +1459,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
 	switch (pdev->device) {
 	case PCI_DEVICE_ID_JMICRON_JMB360: /* SATA single port */
 	case PCI_DEVICE_ID_JMICRON_JMB362: /* SATA dual ports */
+	case PCI_DEVICE_ID_JMICRON_JMB364: /* SATA dual ports */
 		/* The controller should be in single function ahci mode */
 		conf1 |= 0x0002A100; /* Set 8, 13, 15, 17 */
 		break;
@@ -1470,6 +1471,7 @@ static void quirk_jmicron_ata(struct pci_dev *pdev)
 		/* Fall through */
 	case PCI_DEVICE_ID_JMICRON_JMB361:
 	case PCI_DEVICE_ID_JMICRON_JMB363:
+	case PCI_DEVICE_ID_JMICRON_JMB369:
 		/* Enable dual function mode, AHCI on fn 0, IDE fn1 */
 		/* Set the class codes correctly and then direct IDE 0 */
 		conf1 |= 0x00C2A1B3; /* Set 0, 1, 4, 5, 7, 8, 13, 15, 17, 22, 23 */
@@ -1496,16 +1498,20 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, qui
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB360, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB361, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB362, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB363, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB364, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB365, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB366, quirk_jmicron_ata);
 DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB368, quirk_jmicron_ata);
+DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB369, quirk_jmicron_ata);
 
 #endif
 
diff --git a/include/linux/ahci_platform.h b/include/linux/ahci_platform.h
index f7dd576..be3d9a7 100644
--- a/include/linux/ahci_platform.h
+++ b/include/linux/ahci_platform.h
@@ -15,11 +15,13 @@
 #ifndef _AHCI_PLATFORM_H
 #define _AHCI_PLATFORM_H
 
+#include <linux/compiler.h>
+
 struct device;
 struct ata_port_info;
 
 struct ahci_platform_data {
-	int (*init)(struct device *dev);
+	int (*init)(struct device *dev, void __iomem *addr);
 	void (*exit)(struct device *dev);
 	const struct ata_port_info *ata_port_info;
 	unsigned int force_port_map;
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 3bedcc1..eb200e6 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2324,9 +2324,11 @@
 #define PCI_DEVICE_ID_JMICRON_JMB361	0x2361
 #define PCI_DEVICE_ID_JMICRON_JMB362	0x2362
 #define PCI_DEVICE_ID_JMICRON_JMB363	0x2363
+#define PCI_DEVICE_ID_JMICRON_JMB364	0x2364
 #define PCI_DEVICE_ID_JMICRON_JMB365	0x2365
 #define PCI_DEVICE_ID_JMICRON_JMB366	0x2366
 #define PCI_DEVICE_ID_JMICRON_JMB368	0x2368
+#define PCI_DEVICE_ID_JMICRON_JMB369	0x2369
 #define PCI_DEVICE_ID_JMICRON_JMB38X_SD	0x2381
 #define PCI_DEVICE_ID_JMICRON_JMB38X_MMC 0x2382
 #define PCI_DEVICE_ID_JMICRON_JMB38X_MS	0x2383

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2010-06-02 18:08 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2010-06-02 18:08 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-scsi, linux-ide, LKML


1) Last half of a block layer update to support the host-protected area
   (HPA) on ATA disks, an ATA feature which controls whether the disk
   reports full capacity (normal + host area) or reduced capacity
   (normal area only).

2) various fixes


Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/Kconfig       |    6 +++---
 drivers/ata/libata-core.c |    6 +++---
 drivers/ata/libata-scsi.c |   29 +++++++++++++++++++++++++++++
 drivers/ata/sata_nv.c     |    2 --
 drivers/ata/sata_via.c    |   13 +++++++++++++
 drivers/scsi/sd.c         |   22 ++++++++++++++++++++++
 include/linux/libata.h    |    2 ++
 include/scsi/scsi_host.h  |    8 ++++++++
 8 files changed, 80 insertions(+), 8 deletions(-)

Stefan Richter (1):
      libata-sff: trivial corrections to Kconfig help text

Tejun Heo (5):
      sata_via: magic vt6421 fix for transmission problems w/ WD drives
      sata_nv: don't diddle with nIEN on mcp55
      SCSI: implement sd_unlock_native_capacity()
      libata: use the enlarged capacity after late HPA unlock
      libata: implement on-demand HPA unlocking

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 73f8833..aa85a98 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -168,10 +168,10 @@ config ATA_BMDMA
 	default y
 	help
 	  This option adds support for SFF ATA controllers with BMDMA
-	  capability.  BMDMA stands for bus-master DMA and the
-	  de-facto DMA interface for SFF controllers.
+	  capability.  BMDMA stands for bus-master DMA and is the
+	  de facto DMA interface for SFF controllers.
 
-	  If unuser, say Y.
+	  If unsure, say Y.
 
 if ATA_BMDMA
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 06b7e49..ddf8e48 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4119,9 +4119,8 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 	    dev->n_sectors > n_sectors && dev->n_sectors == n_native_sectors) {
 		ata_dev_printk(dev, KERN_WARNING,
 			       "new n_sectors matches native, probably "
-			       "late HPA unlock, continuing\n");
-		/* keep using the old n_sectors */
-		dev->n_sectors = n_sectors;
+			       "late HPA unlock, n_sectors updated\n");
+		/* use the larger n_sectors */
 		return 0;
 	}
 
@@ -6669,6 +6668,7 @@ EXPORT_SYMBOL_GPL(ata_dummy_port_info);
 EXPORT_SYMBOL_GPL(ata_link_next);
 EXPORT_SYMBOL_GPL(ata_dev_next);
 EXPORT_SYMBOL_GPL(ata_std_bios_param);
+EXPORT_SYMBOL_GPL(ata_scsi_unlock_native_capacity);
 EXPORT_SYMBOL_GPL(ata_host_init);
 EXPORT_SYMBOL_GPL(ata_host_alloc);
 EXPORT_SYMBOL_GPL(ata_host_alloc_pinfo);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index cfa9dd3..a54273d 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,35 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 }
 
 /**
+ *	ata_scsi_unlock_native_capacity - unlock native capacity
+ *	@sdev: SCSI device to adjust device capacity for
+ *
+ *	This function is called if a partition on @sdev extends beyond
+ *	the end of the device.  It requests EH to unlock HPA.
+ *
+ *	LOCKING:
+ *	Defined by the SCSI layer.  Might sleep.
+ */
+void ata_scsi_unlock_native_capacity(struct scsi_device *sdev)
+{
+	struct ata_port *ap = ata_shost_to_port(sdev->host);
+	struct ata_device *dev;
+	unsigned long flags;
+
+	spin_lock_irqsave(ap->lock, flags);
+
+	dev = ata_scsi_find_dev(ap, sdev);
+	if (dev && dev->n_sectors < dev->n_native_sectors) {
+		dev->flags |= ATA_DFLAG_UNLOCK_HPA;
+		dev->link->eh_info.action |= ATA_EH_RESET;
+		ata_port_schedule_eh(ap);
+	}
+
+	spin_unlock_irqrestore(ap->lock, flags);
+	ata_port_wait_eh(ap);
+}
+
+/**
  *	ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
  *	@ap: target port
  *	@sdev: SCSI device to get identify data for
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index 6fd1147..2116113 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -1669,7 +1669,6 @@ static void nv_mcp55_freeze(struct ata_port *ap)
 	mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
 	mask &= ~(NV_INT_ALL_MCP55 << shift);
 	writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
-	ata_sff_freeze(ap);
 }
 
 static void nv_mcp55_thaw(struct ata_port *ap)
@@ -1683,7 +1682,6 @@ static void nv_mcp55_thaw(struct ata_port *ap)
 	mask = readl(mmio_base + NV_INT_ENABLE_MCP55);
 	mask |= (NV_INT_MASK_MCP55 << shift);
 	writel(mask, mmio_base + NV_INT_ENABLE_MCP55);
-	ata_sff_thaw(ap);
 }
 
 static void nv_adma_error_handler(struct ata_port *ap)
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 101d8c2..0ecd0f6 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -575,6 +575,19 @@ static void svia_configure(struct pci_dev *pdev)
 		tmp8 |= NATIVE_MODE_ALL;
 		pci_write_config_byte(pdev, SATA_NATIVE_MODE, tmp8);
 	}
+
+	/*
+	 * vt6421 has problems talking to some drives.  The following
+	 * is the magic fix from Joseph Chan <JosephChan@via.com.tw>.
+	 * Please add proper documentation if possible.
+	 *
+	 * https://bugzilla.kernel.org/show_bug.cgi?id=15173
+	 */
+	if (pdev->device == 0x3249) {
+		pci_read_config_byte(pdev, 0x52, &tmp8);
+		tmp8 |= 1 << 2;
+		pci_write_config_byte(pdev, 0x52, tmp8);
+	}
 }
 
 static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 829cc37..8802e48 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -97,6 +97,7 @@ MODULE_ALIAS_SCSI_DEVICE(TYPE_RBC);
 #endif
 
 static int  sd_revalidate_disk(struct gendisk *);
+static void sd_unlock_native_capacity(struct gendisk *disk);
 static int  sd_probe(struct device *);
 static int  sd_remove(struct device *);
 static void sd_shutdown(struct device *);
@@ -1101,6 +1102,7 @@ static const struct block_device_operations sd_fops = {
 #endif
 	.media_changed		= sd_media_changed,
 	.revalidate_disk	= sd_revalidate_disk,
+	.unlock_native_capacity	= sd_unlock_native_capacity,
 };
 
 static unsigned int sd_completed_bytes(struct scsi_cmnd *scmd)
@@ -2121,6 +2123,26 @@ static int sd_revalidate_disk(struct gendisk *disk)
 }
 
 /**
+ *	sd_unlock_native_capacity - unlock native capacity
+ *	@disk: struct gendisk to set capacity for
+ *
+ *	Block layer calls this function if it detects that partitions
+ *	on @disk reach beyond the end of the device.  If the SCSI host
+ *	implements ->unlock_native_capacity() method, it's invoked to
+ *	give it a chance to adjust the device capacity.
+ *
+ *	CONTEXT:
+ *	Defined by block layer.  Might sleep.
+ */
+static void sd_unlock_native_capacity(struct gendisk *disk)
+{
+	struct scsi_device *sdev = scsi_disk(disk)->device;
+
+	if (sdev->host->hostt->unlock_native_capacity)
+		sdev->host->hostt->unlock_native_capacity(sdev);
+}
+
+/**
  *	sd_format_disk_name - format disk name
  *	@prefix: name prefix - ie. "sd" for SCSI disks
  *	@index: index of the disk to format name for
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3bad270..b85f3ff 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1023,6 +1023,7 @@ extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
 extern int ata_std_bios_param(struct scsi_device *sdev,
 			      struct block_device *bdev,
 			      sector_t capacity, int geom[]);
+extern void ata_scsi_unlock_native_capacity(struct scsi_device *sdev);
 extern int ata_scsi_slave_config(struct scsi_device *sdev);
 extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
 extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
@@ -1174,6 +1175,7 @@ extern struct device_attribute *ata_common_sdev_attrs[];
 	.slave_configure	= ata_scsi_slave_config,	\
 	.slave_destroy		= ata_scsi_slave_destroy,	\
 	.bios_param		= ata_std_bios_param,		\
+	.unlock_native_capacity	= ata_scsi_unlock_native_capacity, \
 	.sdev_attrs		= ata_common_sdev_attrs
 
 #define ATA_NCQ_SHT(drv_name)					\
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index c50a97f..b7bdecb 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -327,6 +327,14 @@ struct scsi_host_template {
 			sector_t, int []);
 
 	/*
+	 * This function is called when one or more partitions on the
+	 * device reach beyond the end of the device.
+	 *
+	 * Status: OPTIONAL
+	 */
+	void (*unlock_native_capacity)(struct scsi_device *);
+
+	/*
 	 * Can be used to export driver statistics and other infos to the
 	 * world outside the kernel ie. userspace and it also provides an
 	 * interface to feed the driver with information.

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2010-05-28  1:18 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2010-05-28  1:18 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


1) Finish Tejun's SFF<->BMDMA separation patchset, as mentioned in
   initial 2.6.35 push.  These had been submitted prior to merge
   window open, but had to wait to resolve some patch/merge conflicts.

2) Disable Asynchronous Notification (AN) by default.  Proper use
   is vague, and behavior of firmwares in the field do not match each
   other.

3) add 'dump_id' debugging output helper, to give us better bug reports


Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 Documentation/kernel-parameters.txt |    2 +
 drivers/ata/Kconfig                 |  511 ++++++++++++++++++-----------------
 drivers/ata/Makefile                |   83 ++++---
 drivers/ata/ata_generic.c           |    2 +-
 drivers/ata/ata_piix.c              |    4 +-
 drivers/ata/libata-core.c           |   16 +-
 drivers/ata/libata-sff.c            |  416 ++++++++++++++++++++---------
 drivers/ata/pata_acpi.c             |    2 +-
 drivers/ata/pata_ali.c              |    5 +-
 drivers/ata/pata_amd.c              |    2 +-
 drivers/ata/pata_artop.c            |    2 +-
 drivers/ata/pata_atiixp.c           |    4 +-
 drivers/ata/pata_atp867x.c          |    2 +-
 drivers/ata/pata_bf54x.c            |    2 +-
 drivers/ata/pata_cmd64x.c           |    2 +-
 drivers/ata/pata_cs5520.c           |    2 +-
 drivers/ata/pata_cs5530.c           |    2 +-
 drivers/ata/pata_cs5535.c           |    2 +-
 drivers/ata/pata_cs5536.c           |    2 +-
 drivers/ata/pata_cypress.c          |    2 +-
 drivers/ata/pata_efar.c             |    4 +-
 drivers/ata/pata_hpt366.c           |    2 +-
 drivers/ata/pata_hpt37x.c           |    2 +-
 drivers/ata/pata_hpt3x2n.c          |    2 +-
 drivers/ata/pata_hpt3x3.c           |    2 +-
 drivers/ata/pata_icside.c           |    2 +-
 drivers/ata/pata_it8213.c           |    2 +-
 drivers/ata/pata_it821x.c           |    2 +-
 drivers/ata/pata_jmicron.c          |    2 +-
 drivers/ata/pata_macio.c            |    2 +-
 drivers/ata/pata_marvell.c          |    2 +-
 drivers/ata/pata_mpc52xx.c          |    2 +-
 drivers/ata/pata_netcell.c          |    2 +-
 drivers/ata/pata_ninja32.c          |    2 +-
 drivers/ata/pata_ns87415.c          |    2 +-
 drivers/ata/pata_octeon_cf.c        |   18 --
 drivers/ata/pata_oldpiix.c          |    2 +-
 drivers/ata/pata_optidma.c          |    2 +-
 drivers/ata/pata_pdc2027x.c         |    2 +-
 drivers/ata/pata_pdc202xx_old.c     |    2 +-
 drivers/ata/pata_piccolo.c          |    2 +-
 drivers/ata/pata_radisys.c          |    2 +-
 drivers/ata/pata_rdc.c              |    4 +-
 drivers/ata/pata_sc1200.c           |    2 +-
 drivers/ata/pata_scc.c              |    4 +-
 drivers/ata/pata_sch.c              |    2 +-
 drivers/ata/pata_serverworks.c      |    2 +-
 drivers/ata/pata_sil680.c           |    4 +-
 drivers/ata/pata_sis.c              |    2 +-
 drivers/ata/pata_sl82c105.c         |    2 +-
 drivers/ata/pata_triflex.c          |    2 +-
 drivers/ata/pata_via.c              |    2 +-
 drivers/ata/sata_mv.c               |    4 +-
 drivers/ata/sata_nv.c               |    8 +-
 drivers/ata/sata_qstor.c            |   16 +-
 drivers/ata/sata_sil.c              |    4 +-
 drivers/ata/sata_sis.c              |    4 +-
 drivers/ata/sata_svw.c              |    2 +-
 drivers/ata/sata_uli.c              |    2 +-
 drivers/ata/sata_via.c              |    8 +-
 drivers/ata/sata_vsc.c              |    2 +-
 include/linux/libata.h              |   36 ++-
 62 files changed, 720 insertions(+), 519 deletions(-)

Tejun Heo (8):
      sata_mv: drop unncessary EH callback resetting
      libata-sff: ata_sff_irq_clear() is BMDMA specific
      libata-sff: separate out BMDMA irq handler
      libata-sff: separate out BMDMA init
      libata-sff: kill dummy BMDMA ops from sata_qstor and pata_octeon_cf
      libata-sff: make BMDMA optional
      libata: disable ATAPI AN by default
      libata: implement dump_id force param

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b56ea86..a5c0550 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1252,6 +1252,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			* nohrst, nosrst, norst: suppress hard, soft
                           and both resets.
 
+			* dump_id: dump IDENTIFY data.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index e68541f..73f8833 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -57,6 +57,8 @@ config SATA_PMP
 	  This option adds support for SATA Port Multipliers
 	  (the SATA version of an ethernet hub, or SAS expander).
 
+comment "Controllers with non-SFF native interface"
+
 config SATA_AHCI
 	tristate "AHCI SATA support"
 	depends on PCI
@@ -73,11 +75,12 @@ config SATA_AHCI_PLATFORM
 
 	  If unsure, say N.
 
-config SATA_SIL24
-	tristate "Silicon Image 3124/3132 SATA support"
-	depends on PCI
+config SATA_FSL
+	tristate "Freescale 3.0Gbps SATA support"
+	depends on FSL_SOC
 	help
-	  This option enables support for Silicon Image 3124/3132 Serial ATA.
+	  This option enables support for Freescale 3.0Gbps SATA controller.
+	  It can be found on MPC837x and MPC8315.
 
 	  If unsure, say N.
 
@@ -87,12 +90,11 @@ config SATA_INIC162X
 	help
 	  This option enables support for Initio 162x Serial ATA.
 
-config SATA_FSL
-	tristate "Freescale 3.0Gbps SATA support"
-	depends on FSL_SOC
+config SATA_SIL24
+	tristate "Silicon Image 3124/3132 SATA support"
+	depends on PCI
 	help
-	  This option enables support for Freescale 3.0Gbps SATA controller.
-	  It can be found on MPC837x and MPC8315.
+	  This option enables support for Silicon Image 3124/3132 Serial ATA.
 
 	  If unsure, say N.
 
@@ -116,15 +118,65 @@ config ATA_SFF
 
 if ATA_SFF
 
-config SATA_SVW
-	tristate "ServerWorks Frodo / Apple K2 SATA support"
+comment "SFF controllers with custom DMA interface"
+
+config PDC_ADMA
+	tristate "Pacific Digital ADMA support"
 	depends on PCI
 	help
-	  This option enables support for Broadcom/Serverworks/Apple K2
-	  SATA support.
+	  This option enables support for Pacific Digital ADMA controllers
+
+	  If unsure, say N.
+
+config PATA_MPC52xx
+	tristate "Freescale MPC52xx SoC internal IDE"
+	depends on PPC_MPC52xx && PPC_BESTCOMM
+	select PPC_BESTCOMM_ATA
+	help
+	  This option enables support for integrated IDE controller
+	  of the Freescale MPC52xx SoC.
+
+	  If unsure, say N.
+
+config PATA_OCTEON_CF
+	tristate "OCTEON Boot Bus Compact Flash support"
+	depends on CPU_CAVIUM_OCTEON
+	help
+	  This option enables a polled compact flash driver for use with
+	  compact flash cards attached to the OCTEON boot bus.
+
+	  If unsure, say N.
+
+config SATA_QSTOR
+	tristate "Pacific Digital SATA QStor support"
+	depends on PCI
+	help
+	  This option enables support for Pacific Digital Serial ATA QStor.
+
+	  If unsure, say N.
+
+config SATA_SX4
+	tristate "Promise SATA SX4 support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for Promise Serial ATA SX4.
 
 	  If unsure, say N.
 
+config ATA_BMDMA
+	bool "ATA BMDMA support"
+	default y
+	help
+	  This option adds support for SFF ATA controllers with BMDMA
+	  capability.  BMDMA stands for bus-master DMA and the
+	  de-facto DMA interface for SFF controllers.
+
+	  If unuser, say Y.
+
+if ATA_BMDMA
+
+comment "SATA SFF controllers with BMDMA"
+
 config ATA_PIIX
 	tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 	depends on PCI
@@ -152,22 +204,6 @@ config SATA_NV
 
 	  If unsure, say N.
 
-config PDC_ADMA
-	tristate "Pacific Digital ADMA support"
-	depends on PCI
-	help
-	  This option enables support for Pacific Digital ADMA controllers
-
-	  If unsure, say N.
-
-config SATA_QSTOR
-	tristate "Pacific Digital SATA QStor support"
-	depends on PCI
-	help
-	  This option enables support for Pacific Digital Serial ATA QStor.
-
-	  If unsure, say N.
-
 config SATA_PROMISE
 	tristate "Promise SATA TX2/TX4 support"
 	depends on PCI
@@ -176,14 +212,6 @@ config SATA_PROMISE
 
 	  If unsure, say N.
 
-config SATA_SX4
-	tristate "Promise SATA SX4 support (Experimental)"
-	depends on PCI && EXPERIMENTAL
-	help
-	  This option enables support for Promise Serial ATA SX4.
-
-	  If unsure, say N.
-
 config SATA_SIL
 	tristate "Silicon Image SATA support"
 	depends on PCI
@@ -203,6 +231,15 @@ config SATA_SIS
 	  enable the PATA_SIS driver in the config.
 	  If unsure, say N.
 
+config SATA_SVW
+	tristate "ServerWorks Frodo / Apple K2 SATA support"
+	depends on PCI
+	help
+	  This option enables support for Broadcom/Serverworks/Apple K2
+	  SATA support.
+
+	  If unsure, say N.
+
 config SATA_ULI
 	tristate "ULi Electronics SATA support"
 	depends on PCI
@@ -227,14 +264,7 @@ config SATA_VITESSE
 
 	  If unsure, say N.
 
-config PATA_ACPI
-	tristate "ACPI firmware driver for PATA"
-	depends on ATA_ACPI
-	help
-	  This option enables an ACPI method driver which drives
-	  motherboard PATA controller interfaces through the ACPI
-	  firmware in the BIOS. This driver can sometimes handle
-	  otherwise unsupported hardware.
+comment "PATA SFF controllers with BMDMA"
 
 config PATA_ALI
 	tristate "ALi PATA support"
@@ -262,40 +292,30 @@ config PATA_ARTOP
 
 	  If unsure, say N.
 
-config PATA_ATP867X
-	tristate "ARTOP/Acard ATP867X PATA support"
+config PATA_ATIIXP
+	tristate "ATI PATA support"
 	depends on PCI
 	help
-	  This option enables support for ARTOP/Acard ATP867X PATA
-	  controllers.
-
-	  If unsure, say N.
-
-config PATA_AT32
-	tristate "Atmel AVR32 PATA support (Experimental)"
-	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
-	help
-	  This option enables support for the IDE devices on the
-	  Atmel AT32AP platform.
+	  This option enables support for the ATI ATA interfaces
+	  found on the many ATI chipsets.
 
 	  If unsure, say N.
 
-config PATA_ATIIXP
-	tristate "ATI PATA support"
+config PATA_ATP867X
+	tristate "ARTOP/Acard ATP867X PATA support"
 	depends on PCI
 	help
-	  This option enables support for the ATI ATA interfaces
-	  found on the many ATI chipsets.
+	  This option enables support for ARTOP/Acard ATP867X PATA
+	  controllers.
 
 	  If unsure, say N.
 
-config PATA_CMD640_PCI
-	tristate "CMD640 PCI PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
+config PATA_BF54X
+	tristate "Blackfin 54x ATAPI support"
+	depends on BF542 || BF548 || BF549
 	help
-	  This option enables support for the CMD640 PCI IDE
-	  interface chip. Only the primary channel is currently
-	  supported.
+	  This option enables support for the built-in ATAPI controller on
+	  Blackfin 54x family chips.
 
 	  If unsure, say N.
 
@@ -362,15 +382,6 @@ config PATA_EFAR
 
 	  If unsure, say N.
 
-config ATA_GENERIC
-	tristate "Generic ATA support"
-	depends on PCI
-	help
-	  This option enables support for generic BIOS configured
-	  ATA controllers via the new ATA layer
-
-	  If unsure, say N.
-
 config PATA_HPT366
 	tristate "HPT 366/368 PATA support"
 	depends on PCI
@@ -415,12 +426,20 @@ config PATA_HPT3X3_DMA
 	  controllers. Enable with care as there are still some
 	  problems with DMA on this chipset.
 
-config PATA_ISAPNP
-	tristate "ISA Plug and Play PATA support"
-	depends on ISAPNP
+config PATA_ICSIDE
+	tristate "Acorn ICS PATA support"
+	depends on ARM && ARCH_ACORN
 	help
-	  This option enables support for ISA plug & play ATA
-	  controllers such as those found on old soundcards.
+	  On Acorn systems, say Y here if you wish to use the ICS PATA
+	  interface card.  This is not required for ICS partition support.
+	  If you are unsure, say N to this.
+
+config PATA_IT8213
+	tristate "IT8213 PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the ITE 821 PATA
+          controllers via the new ATA layer.
 
 	  If unsure, say N.
 
@@ -434,15 +453,6 @@ config PATA_IT821X
 
 	  If unsure, say N.
 
-config PATA_IT8213
-	tristate "IT8213 PATA support (Experimental)"
-	depends on PCI && EXPERIMENTAL
-	help
-	  This option enables support for the ITE 821 PATA
-          controllers via the new ATA layer.
-
-	  If unsure, say N.
-
 config PATA_JMICRON
 	tristate "JMicron PATA support"
 	depends on PCI
@@ -452,23 +462,14 @@ config PATA_JMICRON
 
 	  If unsure, say N.
 
-config PATA_LEGACY
-	tristate "Legacy ISA PATA support (Experimental)"
-	depends on (ISA || PCI)  && EXPERIMENTAL
-	help
-	  This option enables support for ISA/VLB/PCI bus legacy PATA
-	  ports and allows them to be accessed via the new ATA layer.
-
-	  If unsure, say N.
-
-config PATA_TRIFLEX
-	tristate "Compaq Triflex PATA support"
-	depends on PCI
+config PATA_MACIO
+	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
+	depends on PPC_PMAC
 	help
-	  Enable support for the Compaq 'Triflex' IDE controller as found
-	  on many Compaq Pentium-Pro systems, via the new ATA layer.
-
-	  If unsure, say N.
+	  Most IDE capable PowerMacs have IDE busses driven by a variant
+          of this controller which is part of the Apple chipset used on
+          most PowerMac models. Some models have multiple busses using
+          different chipsets, though generally, MacIO is one of them.
 
 config PATA_MARVELL
 	tristate "Marvell PATA support via legacy mode"
@@ -481,32 +482,6 @@ config PATA_MARVELL
 
 	  If unsure, say N.
 
-config PATA_MPC52xx
-	tristate "Freescale MPC52xx SoC internal IDE"
-	depends on PPC_MPC52xx && PPC_BESTCOMM
-	select PPC_BESTCOMM_ATA
-	help
-	  This option enables support for integrated IDE controller
-	  of the Freescale MPC52xx SoC.
-
-	  If unsure, say N.
-
-config PATA_MPIIX
-	tristate "Intel PATA MPIIX support"
-	depends on PCI
-	help
-	  This option enables support for MPIIX PATA support.
-
-	  If unsure, say N.
-
-config PATA_OLDPIIX
-	tristate "Intel PATA old PIIX support"
-	depends on PCI
-	help
-	  This option enables support for early PIIX PATA support.
-
-	  If unsure, say N.
-
 config PATA_NETCELL
 	tristate "NETCELL Revolution RAID support"
 	depends on PCI
@@ -525,15 +500,6 @@ config PATA_NINJA32
 
 	  If unsure, say N.
 
-config PATA_NS87410
-	tristate "Nat Semi NS87410 PATA support"
-	depends on PCI
-	help
-	  This option enables support for the National Semiconductor
-	  NS87410 PCI-IDE controller.
-
-	  If unsure, say N.
-
 config PATA_NS87415
 	tristate "Nat Semi NS87415 PATA support"
 	depends on PCI
@@ -543,12 +509,11 @@ config PATA_NS87415
 
 	  If unsure, say N.
 
-config PATA_OPTI
-	tristate "OPTI621/6215 PATA support (Very Experimental)"
-	depends on PCI && EXPERIMENTAL
+config PATA_OLDPIIX
+	tristate "Intel PATA old PIIX support"
+	depends on PCI
 	help
-	  This option enables full PIO support for the early Opti ATA
-	  controllers found on some old motherboards.
+	  This option enables support for early PIIX PATA support.
 
 	  If unsure, say N.
 
@@ -562,24 +527,6 @@ config PATA_OPTIDMA
 
 	  If unsure, say N.
 
-config PATA_PALMLD
-	tristate "Palm LifeDrive PATA support"
-	depends on MACH_PALMLD
-	help
-	  This option enables support for Palm LifeDrive's internal ATA
-	  port via the new ATA layer.
-
-	  If unsure, say N.
-
-config PATA_PCMCIA
-	tristate "PCMCIA PATA support"
-	depends on PCMCIA
-	help
-	  This option enables support for PCMCIA ATA interfaces, including
-	  compact flash card adapters via the new ATA layer.
-
-	  If unsure, say N.
-
 config PATA_PDC2027X
 	tristate "Promise PATA 2027x support"
 	depends on PCI
@@ -597,12 +544,6 @@ config PATA_PDC_OLD
 
 	  If unsure, say N.
 
-config PATA_QDI
-	tristate "QDI VLB PATA support"
-	depends on ISA
-	help
-	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
-
 config PATA_RADISYS
 	tristate "RADISYS 82600 PATA support (Experimental)"
 	depends on PCI && EXPERIMENTAL
@@ -612,15 +553,6 @@ config PATA_RADISYS
 
 	  If unsure, say N.
 
-config PATA_RB532
-	tristate "RouterBoard 532 PATA CompactFlash support"
-	depends on MIKROTIK_RB532
-	help
-	  This option enables support for the RouterBoard 532
-	  PATA CompactFlash controller.
-
-	  If unsure, say N.
-
 config PATA_RDC
 	tristate "RDC PATA support"
 	depends on PCI
@@ -631,21 +563,30 @@ config PATA_RDC
 
 	  If unsure, say N.
 
-config PATA_RZ1000
-	tristate "PC Tech RZ1000 PATA support"
+config PATA_SC1200
+	tristate "SC1200 PATA support"
 	depends on PCI
 	help
-	  This option enables basic support for the PC Tech RZ1000/1
-	  PATA controllers via the new ATA layer
+	  This option enables support for the NatSemi/AMD SC1200 SoC
+	  companion chip used with the Geode processor family.
 
 	  If unsure, say N.
 
-config PATA_SC1200
-	tristate "SC1200 PATA support"
+config PATA_SCC
+	tristate "Toshiba's Cell Reference Set IDE support"
+	depends on PCI && PPC_CELLEB
+	help
+	  This option enables support for the built-in IDE controller on
+	  Toshiba Cell Reference Board.
+
+	  If unsure, say N.
+
+config PATA_SCH
+	tristate "Intel SCH PATA support"
 	depends on PCI
 	help
-	  This option enables support for the NatSemi/AMD SC1200 SoC
-	  companion chip used with the Geode processor family.
+	  This option enables support for Intel SCH PATA on the Intel
+	  SCH (US15W, US15L, UL11L) series host controllers.
 
 	  If unsure, say N.
 
@@ -683,6 +624,15 @@ config PATA_TOSHIBA
 
 	  If unsure, say N.
 
+config PATA_TRIFLEX
+	tristate "Compaq Triflex PATA support"
+	depends on PCI
+	help
+	  Enable support for the Compaq 'Triflex' IDE controller as found
+	  on many Compaq Pentium-Pro systems, via the new ATA layer.
+
+	  If unsure, say N.
+
 config PATA_VIA
 	tristate "VIA PATA support"
 	depends on PCI
@@ -701,12 +651,99 @@ config PATA_WINBOND
 
 	  If unsure, say N.
 
-config PATA_WINBOND_VLB
-	tristate "Winbond W83759A VLB PATA support (Experimental)"
-	depends on ISA && EXPERIMENTAL
+endif # ATA_BMDMA
+
+comment "PIO-only SFF controllers"
+
+config PATA_AT32
+	tristate "Atmel AVR32 PATA support (Experimental)"
+	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 	help
-	  Support for the Winbond W83759A controller on Vesa Local Bus
-	  systems.
+	  This option enables support for the IDE devices on the
+	  Atmel AT32AP platform.
+
+	  If unsure, say N.
+
+config PATA_AT91
+	tristate "PATA support for AT91SAM9260"
+	depends on ARM && ARCH_AT91
+	help
+	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+	  If unsure, say N.
+
+config PATA_CMD640_PCI
+	tristate "CMD640 PCI PATA support (Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables support for the CMD640 PCI IDE
+	  interface chip. Only the primary channel is currently
+	  supported.
+
+	  If unsure, say N.
+
+config PATA_ISAPNP
+	tristate "ISA Plug and Play PATA support"
+	depends on ISAPNP
+	help
+	  This option enables support for ISA plug & play ATA
+	  controllers such as those found on old soundcards.
+
+	  If unsure, say N.
+
+config PATA_IXP4XX_CF
+	tristate "IXP4XX Compact Flash support"
+	depends on ARCH_IXP4XX
+	help
+	  This option enables support for a Compact Flash connected on
+	  the ixp4xx expansion bus. This driver had been written for
+	  Loft/Avila boards in mind but can work with others.
+
+	  If unsure, say N.
+
+config PATA_MPIIX
+	tristate "Intel PATA MPIIX support"
+	depends on PCI
+	help
+	  This option enables support for MPIIX PATA support.
+
+	  If unsure, say N.
+
+config PATA_NS87410
+	tristate "Nat Semi NS87410 PATA support"
+	depends on PCI
+	help
+	  This option enables support for the National Semiconductor
+	  NS87410 PCI-IDE controller.
+
+	  If unsure, say N.
+
+config PATA_OPTI
+	tristate "OPTI621/6215 PATA support (Very Experimental)"
+	depends on PCI && EXPERIMENTAL
+	help
+	  This option enables full PIO support for the early Opti ATA
+	  controllers found on some old motherboards.
+
+	  If unsure, say N.
+
+config PATA_PALMLD
+	tristate "Palm LifeDrive PATA support"
+	depends on MACH_PALMLD
+	help
+	  This option enables support for Palm LifeDrive's internal ATA
+	  port via the new ATA layer.
+
+	  If unsure, say N.
+
+config PATA_PCMCIA
+	tristate "PCMCIA PATA support"
+	depends on PCMCIA
+	help
+	  This option enables support for PCMCIA ATA interfaces, including
+	  compact flash card adapters via the new ATA layer.
+
+	  If unsure, say N.
 
 config HAVE_PATA_PLATFORM
 	bool
@@ -725,14 +762,6 @@ config PATA_PLATFORM
 
 	  If unsure, say N.
 
-config PATA_AT91
-	tristate "PATA support for AT91SAM9260"
-	depends on ARM && ARCH_AT91
-	help
-	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
-
-	  If unsure, say N.
-
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
 	depends on PATA_PLATFORM && PPC_OF
@@ -743,69 +772,65 @@ config PATA_OF_PLATFORM
 
 	  If unsure, say N.
 
-config PATA_ICSIDE
-	tristate "Acorn ICS PATA support"
-	depends on ARM && ARCH_ACORN
+config PATA_QDI
+	tristate "QDI VLB PATA support"
+	depends on ISA
 	help
-	  On Acorn systems, say Y here if you wish to use the ICS PATA
-	  interface card.  This is not required for ICS partition support.
-	  If you are unsure, say N to this.
+	  Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 
-config PATA_IXP4XX_CF
-	tristate "IXP4XX Compact Flash support"
-	depends on ARCH_IXP4XX
+config PATA_RB532
+	tristate "RouterBoard 532 PATA CompactFlash support"
+	depends on MIKROTIK_RB532
 	help
-	  This option enables support for a Compact Flash connected on
-	  the ixp4xx expansion bus. This driver had been written for
-	  Loft/Avila boards in mind but can work with others.
+	  This option enables support for the RouterBoard 532
+	  PATA CompactFlash controller.
 
 	  If unsure, say N.
 
-config PATA_OCTEON_CF
-	tristate "OCTEON Boot Bus Compact Flash support"
-	depends on CPU_CAVIUM_OCTEON
+config PATA_RZ1000
+	tristate "PC Tech RZ1000 PATA support"
+	depends on PCI
 	help
-	  This option enables a polled compact flash driver for use with
-	  compact flash cards attached to the OCTEON boot bus.
+	  This option enables basic support for the PC Tech RZ1000/1
+	  PATA controllers via the new ATA layer
 
 	  If unsure, say N.
 
-config PATA_SCC
-	tristate "Toshiba's Cell Reference Set IDE support"
-	depends on PCI && PPC_CELLEB
+config PATA_WINBOND_VLB
+	tristate "Winbond W83759A VLB PATA support (Experimental)"
+	depends on ISA && EXPERIMENTAL
 	help
-	  This option enables support for the built-in IDE controller on
-	  Toshiba Cell Reference Board.
+	  Support for the Winbond W83759A controller on Vesa Local Bus
+	  systems.
 
-	  If unsure, say N.
+comment "Generic fallback / legacy drivers"
 
-config PATA_SCH
-	tristate "Intel SCH PATA support"
-	depends on PCI
+config PATA_ACPI
+	tristate "ACPI firmware driver for PATA"
+	depends on ATA_ACPI && ATA_BMDMA
 	help
-	  This option enables support for Intel SCH PATA on the Intel
-	  SCH (US15W, US15L, UL11L) series host controllers.
-
-	  If unsure, say N.
+	  This option enables an ACPI method driver which drives
+	  motherboard PATA controller interfaces through the ACPI
+	  firmware in the BIOS. This driver can sometimes handle
+	  otherwise unsupported hardware.
 
-config PATA_BF54X
-	tristate "Blackfin 54x ATAPI support"
-	depends on BF542 || BF548 || BF549
+config ATA_GENERIC
+	tristate "Generic ATA support"
+	depends on PCI && ATA_BMDMA
 	help
-	  This option enables support for the built-in ATAPI controller on
-	  Blackfin 54x family chips.
+	  This option enables support for generic BIOS configured
+	  ATA controllers via the new ATA layer
 
 	  If unsure, say N.
 
-config PATA_MACIO
-	tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
-	depends on PPC_PMAC
+config PATA_LEGACY
+	tristate "Legacy ISA PATA support (Experimental)"
+	depends on (ISA || PCI) && EXPERIMENTAL
 	help
-	  Most IDE capable PowerMacs have IDE busses driven by a variant
-          of this controller which is part of the Apple chipset used on
-          most PowerMac models. Some models have multiple busses using
-          different chipsets, though generally, MacIO is one of them.
+	  This option enables support for ISA/VLB/PCI bus legacy PATA
+	  ports and allows them to be accessed via the new ATA layer.
 
+	  If unsure, say N.
 
 endif # ATA_SFF
 endif # ATA
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index d0a93c4..7ef89d7 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -1,33 +1,39 @@
 
 obj-$(CONFIG_ATA)		+= libata.o
 
+# non-SFF interface
 obj-$(CONFIG_SATA_AHCI)		+= ahci.o libahci.o
 obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o
-obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
+obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
+obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
+obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
+
+# SFF w/ custom DMA
+obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
+obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
+obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
+obj-$(CONFIG_SATA_QSTOR)	+= sata_qstor.o
+obj-$(CONFIG_SATA_SX4)		+= sata_sx4.o
+
+# SFF SATA w/ BMDMA
 obj-$(CONFIG_ATA_PIIX)		+= ata_piix.o
+obj-$(CONFIG_SATA_MV)		+= sata_mv.o
+obj-$(CONFIG_SATA_NV)		+= sata_nv.o
 obj-$(CONFIG_SATA_PROMISE)	+= sata_promise.o
-obj-$(CONFIG_SATA_QSTOR)	+= sata_qstor.o
 obj-$(CONFIG_SATA_SIL)		+= sata_sil.o
-obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
-obj-$(CONFIG_SATA_VIA)		+= sata_via.o
-obj-$(CONFIG_SATA_VITESSE)	+= sata_vsc.o
 obj-$(CONFIG_SATA_SIS)		+= sata_sis.o
-obj-$(CONFIG_SATA_SX4)		+= sata_sx4.o
-obj-$(CONFIG_SATA_NV)		+= sata_nv.o
+obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
 obj-$(CONFIG_SATA_ULI)		+= sata_uli.o
-obj-$(CONFIG_SATA_MV)		+= sata_mv.o
-obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
-obj-$(CONFIG_PDC_ADMA)		+= pdc_adma.o
-obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
-obj-$(CONFIG_PATA_MACIO)	+= pata_macio.o
+obj-$(CONFIG_SATA_VIA)		+= sata_via.o
+obj-$(CONFIG_SATA_VITESSE)	+= sata_vsc.o
 
+# SFF PATA w/ BMDMA
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
-obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
-obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
-obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
+obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
+obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_CMD64X)	+= pata_cmd64x.o
 obj-$(CONFIG_PATA_CS5520)	+= pata_cs5520.o
 obj-$(CONFIG_PATA_CS5530)	+= pata_cs5530.o
@@ -39,47 +45,50 @@ obj-$(CONFIG_PATA_HPT366)	+= pata_hpt366.o
 obj-$(CONFIG_PATA_HPT37X)	+= pata_hpt37x.o
 obj-$(CONFIG_PATA_HPT3X2N)	+= pata_hpt3x2n.o
 obj-$(CONFIG_PATA_HPT3X3)	+= pata_hpt3x3.o
-obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
-obj-$(CONFIG_PATA_IT821X)	+= pata_it821x.o
+obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
 obj-$(CONFIG_PATA_IT8213)	+= pata_it8213.o
+obj-$(CONFIG_PATA_IT821X)	+= pata_it821x.o
 obj-$(CONFIG_PATA_JMICRON)	+= pata_jmicron.o
+obj-$(CONFIG_PATA_MACIO)	+= pata_macio.o
+obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
 obj-$(CONFIG_PATA_NETCELL)	+= pata_netcell.o
 obj-$(CONFIG_PATA_NINJA32)	+= pata_ninja32.o
-obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
 obj-$(CONFIG_PATA_NS87415)	+= pata_ns87415.o
-obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
-obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
-obj-$(CONFIG_PATA_MPC52xx)	+= pata_mpc52xx.o
-obj-$(CONFIG_PATA_MARVELL)	+= pata_marvell.o
-obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
 obj-$(CONFIG_PATA_OLDPIIX)	+= pata_oldpiix.o
-obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
-obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
+obj-$(CONFIG_PATA_OPTIDMA)	+= pata_optidma.o
 obj-$(CONFIG_PATA_PDC2027X)	+= pata_pdc2027x.o
 obj-$(CONFIG_PATA_PDC_OLD)	+= pata_pdc202xx_old.o
-obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
 obj-$(CONFIG_PATA_RADISYS)	+= pata_radisys.o
-obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
 obj-$(CONFIG_PATA_RDC)		+= pata_rdc.o
-obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
 obj-$(CONFIG_PATA_SC1200)	+= pata_sc1200.o
+obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
+obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_SERVERWORKS)	+= pata_serverworks.o
 obj-$(CONFIG_PATA_SIL680)	+= pata_sil680.o
+obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
 obj-$(CONFIG_PATA_TOSHIBA)	+= pata_piccolo.o
+obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
 obj-$(CONFIG_PATA_VIA)		+= pata_via.o
 obj-$(CONFIG_PATA_WINBOND)	+= pata_sl82c105.o
-obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
-obj-$(CONFIG_PATA_SIS)		+= pata_sis.o
-obj-$(CONFIG_PATA_TRIFLEX)	+= pata_triflex.o
+
+# SFF PIO only
+obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
+obj-$(CONFIG_PATA_AT91)		+= pata_at91.o
+obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
+obj-$(CONFIG_PATA_ISAPNP)	+= pata_isapnp.o
 obj-$(CONFIG_PATA_IXP4XX_CF)	+= pata_ixp4xx_cf.o
-obj-$(CONFIG_PATA_SCC)		+= pata_scc.o
-obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
-obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
-obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
+obj-$(CONFIG_PATA_MPIIX)	+= pata_mpiix.o
+obj-$(CONFIG_PATA_NS87410)	+= pata_ns87410.o
+obj-$(CONFIG_PATA_OPTI)		+= pata_opti.o
+obj-$(CONFIG_PATA_PCMCIA)	+= pata_pcmcia.o
+obj-$(CONFIG_PATA_PALMLD)	+= pata_palmld.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
-obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
-obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
+obj-$(CONFIG_PATA_QDI)		+= pata_qdi.o
+obj-$(CONFIG_PATA_RB532)	+= pata_rb532_cf.o
+obj-$(CONFIG_PATA_RZ1000)	+= pata_rz1000.o
+obj-$(CONFIG_PATA_WINBOND_VLB)	+= pata_winbond.o
+
 # Should be last but two libata driver
 obj-$(CONFIG_PATA_ACPI)		+= pata_acpi.o
 # Should be last but one libata driver
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index 33fb614..573158a 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -155,7 +155,7 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 			return rc;
 		pcim_pin_device(dev);
 	}
-	return ata_pci_sff_init_one(dev, ppi, &generic_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &generic_sht, NULL, 0);
 }
 
 static struct pci_device_id ata_generic[] = {
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ec52fc6..7409f98 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1589,7 +1589,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 		hpriv->map = piix_init_sata_map(pdev, port_info,
 					piix_map_db_table[ent->driver_data]);
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	host->private_data = hpriv;
@@ -1626,7 +1626,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	host->flags |= ATA_HOST_PARALLEL_SCAN;
 
 	pci_set_master(pdev);
-	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
+	return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &piix_sht);
 }
 
 static void piix_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index c47373f..06b7e49 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -160,6 +160,10 @@ int libata_allow_tpm = 0;
 module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
 MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
 
+static int atapi_an;
+module_param(atapi_an, int, 0444);
+MODULE_PARM_DESC(atapi_an, "Enable ATAPI AN media presence notification (0=0ff [default], 1=on)");
+
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
 MODULE_LICENSE("GPL");
@@ -2122,6 +2126,14 @@ retry:
 		goto err_out;
 	}
 
+	if (dev->horkage & ATA_HORKAGE_DUMP_ID) {
+		ata_dev_printk(dev, KERN_DEBUG, "dumping IDENTIFY data, "
+			       "class=%d may_fallback=%d tried_spinup=%d\n",
+			       class, may_fallback, tried_spinup);
+		print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET,
+			       16, 2, id, ATA_ID_WORDS * sizeof(*id), true);
+	}
+
 	/* Falling back doesn't make sense if ID data was read
 	 * successfully at least once.
 	 */
@@ -2510,7 +2522,8 @@ int ata_dev_configure(struct ata_device *dev)
 		 * to enable ATAPI AN to discern between PHY status
 		 * changed notifications and ATAPI ANs.
 		 */
-		if ((ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
+		if (atapi_an &&
+		    (ap->flags & ATA_FLAG_AN) && ata_id_has_atapi_AN(id) &&
 		    (!sata_pmp_attached(ap) ||
 		     sata_scr_read(&ap->link, SCR_NOTIFICATION, &sntf) == 0)) {
 			unsigned int err_mask;
@@ -6372,6 +6385,7 @@ static int __init ata_parse_force_one(char **cur,
 		{ "3.0Gbps",	.spd_limit	= 2 },
 		{ "noncq",	.horkage_on	= ATA_HORKAGE_NONCQ },
 		{ "ncq",	.horkage_off	= ATA_HORKAGE_NONCQ },
+		{ "dump_id",	.horkage_on	= ATA_HORKAGE_DUMP_ID },
 		{ "pio0",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 0) },
 		{ "pio1",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 1) },
 		{ "pio2",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 2) },
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 19ddf92..efa4a18 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -63,7 +63,6 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.sff_tf_read		= ata_sff_tf_read,
 	.sff_exec_command	= ata_sff_exec_command,
 	.sff_data_xfer		= ata_sff_data_xfer,
-	.sff_irq_clear		= ata_sff_irq_clear,
 	.sff_drain_fifo		= ata_sff_drain_fifo,
 
 	.lost_interrupt		= ata_sff_lost_interrupt,
@@ -395,33 +394,12 @@ void ata_sff_irq_on(struct ata_port *ap)
 		ata_sff_set_devctl(ap, ap->ctl);
 	ata_wait_idle(ap);
 
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_irq_on);
 
 /**
- *	ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
- *	@ap: Port associated with this ATA transaction.
- *
- *	Clear interrupt and error flags in DMA status register.
- *
- *	May be used as the irq_clear() entry in ata_port_operations.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- */
-void ata_sff_irq_clear(struct ata_port *ap)
-{
-	void __iomem *mmio = ap->ioaddr.bmdma_addr;
-
-	if (!mmio)
-		return;
-
-	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
-}
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-
-/**
  *	ata_sff_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
@@ -820,11 +798,15 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc)
 	case ATAPI_PROT_NODATA:
 		ap->hsm_task_state = HSM_ST_LAST;
 		break;
+#ifdef CONFIG_ATA_BMDMA
 	case ATAPI_PROT_DMA:
 		ap->hsm_task_state = HSM_ST_LAST;
 		/* initiate bmdma */
 		ap->ops->bmdma_start(qc);
 		break;
+#endif /* CONFIG_ATA_BMDMA */
+	default:
+		BUG();
 	}
 }
 
@@ -1491,27 +1473,27 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
 }
 EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
 
-/**
- *	ata_sff_host_intr - Handle host interrupt for given (port, task)
- *	@ap: Port on which interrupt arrived (possibly...)
- *	@qc: Taskfile currently active in engine
- *
- *	Handle host interrupt for given queued command.  Currently,
- *	only DMA interrupts are handled.  All other commands are
- *	handled via polling with interrupts disabled (nIEN bit).
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	One if interrupt was handled, zero if not (shared irq).
- */
-unsigned int ata_sff_host_intr(struct ata_port *ap,
-				      struct ata_queued_cmd *qc)
+static unsigned int ata_sff_idle_irq(struct ata_port *ap)
 {
-	struct ata_eh_info *ehi = &ap->link.eh_info;
-	u8 status, host_stat = 0;
-	bool bmdma_stopped = false;
+	ap->stats.idle_irq++;
+
+#ifdef ATA_IRQ_TRAP
+	if ((ap->stats.idle_irq % 1000) == 0) {
+		ap->ops->sff_check_status(ap);
+		if (ap->ops->sff_irq_clear)
+			ap->ops->sff_irq_clear(ap);
+		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
+		return 1;
+	}
+#endif
+	return 0;	/* irq not handled */
+}
+
+static unsigned int __ata_sff_port_intr(struct ata_port *ap,
+					struct ata_queued_cmd *qc,
+					bool hsmv_on_idle)
+{
+	u8 status;
 
 	VPRINTK("ata%u: protocol %d task_state %d\n",
 		ap->print_id, qc->tf.protocol, ap->hsm_task_state);
@@ -1528,90 +1510,56 @@ unsigned int ata_sff_host_intr(struct ata_port *ap,
 		 * need to check ata_is_atapi(qc->tf.protocol) again.
 		 */
 		if (!(qc->dev->flags & ATA_DFLAG_CDB_INTR))
-			goto idle_irq;
-		break;
-	case HSM_ST_LAST:
-		if (qc->tf.protocol == ATA_PROT_DMA ||
-		    qc->tf.protocol == ATAPI_PROT_DMA) {
-			/* check status of DMA engine */
-			host_stat = ap->ops->bmdma_status(ap);
-			VPRINTK("ata%u: host_stat 0x%X\n",
-				ap->print_id, host_stat);
-
-			/* if it's not our irq... */
-			if (!(host_stat & ATA_DMA_INTR))
-				goto idle_irq;
-
-			/* before we do anything else, clear DMA-Start bit */
-			ap->ops->bmdma_stop(qc);
-			bmdma_stopped = true;
-
-			if (unlikely(host_stat & ATA_DMA_ERR)) {
-				/* error when transfering data to/from memory */
-				qc->err_mask |= AC_ERR_HOST_BUS;
-				ap->hsm_task_state = HSM_ST_ERR;
-			}
-		}
+			return ata_sff_idle_irq(ap);
 		break;
 	case HSM_ST:
+	case HSM_ST_LAST:
 		break;
 	default:
-		goto idle_irq;
+		return ata_sff_idle_irq(ap);
 	}
 
-
 	/* check main status, clearing INTRQ if needed */
 	status = ata_sff_irq_status(ap);
 	if (status & ATA_BUSY) {
-		if (bmdma_stopped) {
+		if (hsmv_on_idle) {
 			/* BMDMA engine is already stopped, we're screwed */
 			qc->err_mask |= AC_ERR_HSM;
 			ap->hsm_task_state = HSM_ST_ERR;
 		} else
-			goto idle_irq;
+			return ata_sff_idle_irq(ap);
 	}
 
 	/* clear irq events */
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 
 	ata_sff_hsm_move(ap, qc, status, 0);
 
-	if (unlikely(qc->err_mask) && (qc->tf.protocol == ATA_PROT_DMA ||
-				       qc->tf.protocol == ATAPI_PROT_DMA))
-		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
-
 	return 1;	/* irq handled */
-
-idle_irq:
-	ap->stats.idle_irq++;
-
-#ifdef ATA_IRQ_TRAP
-	if ((ap->stats.idle_irq % 1000) == 0) {
-		ap->ops->sff_check_status(ap);
-		ap->ops->sff_irq_clear(ap);
-		ata_port_printk(ap, KERN_WARNING, "irq trap\n");
-		return 1;
-	}
-#endif
-	return 0;	/* irq not handled */
 }
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
 
 /**
- *	ata_sff_interrupt - Default ATA host interrupt handler
- *	@irq: irq line (unused)
- *	@dev_instance: pointer to our ata_host information structure
+ *	ata_sff_port_intr - Handle SFF port interrupt
+ *	@ap: Port on which interrupt arrived (possibly...)
+ *	@qc: Taskfile currently active in engine
  *
- *	Default interrupt handler for PCI IDE devices.  Calls
- *	ata_sff_host_intr() for each port that is not disabled.
+ *	Handle port interrupt for given queued command.
  *
  *	LOCKING:
- *	Obtains host lock during operation.
+ *	spin_lock_irqsave(host lock)
  *
  *	RETURNS:
- *	IRQ_NONE or IRQ_HANDLED.
+ *	One if interrupt was handled, zero if not (shared irq).
  */
-irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+unsigned int ata_sff_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+	return __ata_sff_port_intr(ap, qc, false);
+}
+EXPORT_SYMBOL_GPL(ata_sff_port_intr);
+
+static inline irqreturn_t __ata_sff_interrupt(int irq, void *dev_instance,
+	unsigned int (*port_intr)(struct ata_port *, struct ata_queued_cmd *))
 {
 	struct ata_host *host = dev_instance;
 	bool retried = false;
@@ -1631,7 +1579,7 @@ retry:
 		qc = ata_qc_from_tag(ap, ap->link.active_tag);
 		if (qc) {
 			if (!(qc->tf.flags & ATA_TFLAG_POLLING))
-				handled |= ata_sff_host_intr(ap, qc);
+				handled |= port_intr(ap, qc);
 			else
 				polling |= 1 << i;
 		} else
@@ -1658,7 +1606,8 @@ retry:
 
 			if (idle & (1 << i)) {
 				ap->ops->sff_check_status(ap);
-				ap->ops->sff_irq_clear(ap);
+				if (ap->ops->sff_irq_clear)
+					ap->ops->sff_irq_clear(ap);
 			} else {
 				/* clear INTRQ and check if BUSY cleared */
 				if (!(ap->ops->sff_check_status(ap) & ATA_BUSY))
@@ -1680,6 +1629,25 @@ retry:
 
 	return IRQ_RETVAL(handled);
 }
+
+/**
+ *	ata_sff_interrupt - Default SFF ATA host interrupt handler
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host information structure
+ *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_sff_port_intr() for each port that is not disabled.
+ *
+ *	LOCKING:
+ *	Obtains host lock during operation.
+ *
+ *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
+{
+	return __ata_sff_interrupt(irq, dev_instance, ata_sff_port_intr);
+}
 EXPORT_SYMBOL_GPL(ata_sff_interrupt);
 
 /**
@@ -1717,7 +1685,7 @@ void ata_sff_lost_interrupt(struct ata_port *ap)
 								status);
 	/* Run the host interrupt logic as if the interrupt had not been
 	   lost */
-	ata_sff_host_intr(ap, qc);
+	ata_sff_port_intr(ap, qc);
 }
 EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
 
@@ -1744,7 +1712,8 @@ void ata_sff_freeze(struct ata_port *ap)
 	 */
 	ap->ops->sff_check_status(ap);
 
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_freeze);
 
@@ -1761,7 +1730,8 @@ void ata_sff_thaw(struct ata_port *ap)
 {
 	/* clear & re-enable interrupts */
 	ap->ops->sff_check_status(ap);
-	ap->ops->sff_irq_clear(ap);
+	if (ap->ops->sff_irq_clear)
+		ap->ops->sff_irq_clear(ap);
 	ata_sff_irq_on(ap);
 }
 EXPORT_SYMBOL_GPL(ata_sff_thaw);
@@ -2349,13 +2319,13 @@ int ata_pci_sff_init_host(struct ata_host *host)
 EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
 
 /**
- *	ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
+ *	ata_pci_sff_prepare_host - helper to prepare PCI PIO-only SFF ATA host
  *	@pdev: target PCI device
  *	@ppi: array of port_info, must be enough for two ports
  *	@r_host: out argument for the initialized ATA host
  *
- *	Helper to allocate ATA host for @pdev, acquire all native PCI
- *	resources and initialize it accordingly in one go.
+ *	Helper to allocate PIO-only SFF ATA host for @pdev, acquire
+ *	all PCI resources and initialize it accordingly in one go.
  *
  *	LOCKING:
  *	Inherited from calling layer (may sleep).
@@ -2385,9 +2355,6 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
 	if (rc)
 		goto err_out;
 
-	/* init DMA related stuff */
-	ata_pci_bmdma_init(host);
-
 	devres_remove_group(&pdev->dev, NULL);
 	*r_host = host;
 	return 0;
@@ -2492,8 +2459,21 @@ out:
 }
 EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
 
+static const struct ata_port_info *ata_sff_find_valid_pi(
+					const struct ata_port_info * const *ppi)
+{
+	int i;
+
+	/* look up the first valid port_info */
+	for (i = 0; i < 2 && ppi[i]; i++)
+		if (ppi[i]->port_ops != &ata_dummy_port_ops)
+			return ppi[i];
+
+	return NULL;
+}
+
 /**
- *	ata_pci_sff_init_one - Initialize/register PCI IDE host controller
+ *	ata_pci_sff_init_one - Initialize/register PIO-only PCI IDE controller
  *	@pdev: Controller to be initialized
  *	@ppi: array of port_info, must be enough for two ports
  *	@sht: scsi_host_template to use when registering the host
@@ -2502,11 +2482,7 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
  *
  *	This is a helper function which can be called from a driver's
  *	xxx_init_one() probe function if the hardware uses traditional
- *	IDE taskfile registers.
- *
- *	This function calls pci_enable_device(), reserves its register
- *	regions, sets the dma mask, enables bus master mode, and calls
- *	ata_device_add()
+ *	IDE taskfile registers and is PIO only.
  *
  *	ASSUMPTION:
  *	Nobody makes a single channel controller that appears solely as
@@ -2523,20 +2499,13 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 		 struct scsi_host_template *sht, void *host_priv, int hflag)
 {
 	struct device *dev = &pdev->dev;
-	const struct ata_port_info *pi = NULL;
+	const struct ata_port_info *pi;
 	struct ata_host *host = NULL;
-	int i, rc;
+	int rc;
 
 	DPRINTK("ENTER\n");
 
-	/* look up the first valid port_info */
-	for (i = 0; i < 2 && ppi[i]; i++) {
-		if (ppi[i]->port_ops != &ata_dummy_port_ops) {
-			pi = ppi[i];
-			break;
-		}
-	}
-
+	pi = ata_sff_find_valid_pi(ppi);
 	if (!pi) {
 		dev_printk(KERN_ERR, &pdev->dev,
 			   "no valid port_info specified\n");
@@ -2557,7 +2526,6 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 	host->private_data = host_priv;
 	host->flags |= hflag;
 
-	pci_set_master(pdev);
 	rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
 out:
 	if (rc == 0)
@@ -2571,6 +2539,12 @@ EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 
 #endif /* CONFIG_PCI */
 
+/*
+ *	BMDMA support
+ */
+
+#ifdef CONFIG_ATA_BMDMA
+
 const struct ata_port_operations ata_bmdma_port_ops = {
 	.inherits		= &ata_sff_port_ops,
 
@@ -2580,6 +2554,7 @@ const struct ata_port_operations ata_bmdma_port_ops = {
 	.qc_prep		= ata_bmdma_qc_prep,
 	.qc_issue		= ata_bmdma_qc_issue,
 
+	.sff_irq_clear		= ata_bmdma_irq_clear,
 	.bmdma_setup		= ata_bmdma_setup,
 	.bmdma_start		= ata_bmdma_start,
 	.bmdma_stop		= ata_bmdma_stop,
@@ -2804,6 +2779,75 @@ unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc)
 EXPORT_SYMBOL_GPL(ata_bmdma_qc_issue);
 
 /**
+ *	ata_bmdma_port_intr - Handle BMDMA port interrupt
+ *	@ap: Port on which interrupt arrived (possibly...)
+ *	@qc: Taskfile currently active in engine
+ *
+ *	Handle port interrupt for given queued command.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ *
+ *	RETURNS:
+ *	One if interrupt was handled, zero if not (shared irq).
+ */
+unsigned int ata_bmdma_port_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+{
+	struct ata_eh_info *ehi = &ap->link.eh_info;
+	u8 host_stat = 0;
+	bool bmdma_stopped = false;
+	unsigned int handled;
+
+	if (ap->hsm_task_state == HSM_ST_LAST && ata_is_dma(qc->tf.protocol)) {
+		/* check status of DMA engine */
+		host_stat = ap->ops->bmdma_status(ap);
+		VPRINTK("ata%u: host_stat 0x%X\n", ap->print_id, host_stat);
+
+		/* if it's not our irq... */
+		if (!(host_stat & ATA_DMA_INTR))
+			return ata_sff_idle_irq(ap);
+
+		/* before we do anything else, clear DMA-Start bit */
+		ap->ops->bmdma_stop(qc);
+		bmdma_stopped = true;
+
+		if (unlikely(host_stat & ATA_DMA_ERR)) {
+			/* error when transfering data to/from memory */
+			qc->err_mask |= AC_ERR_HOST_BUS;
+			ap->hsm_task_state = HSM_ST_ERR;
+		}
+	}
+
+	handled = __ata_sff_port_intr(ap, qc, bmdma_stopped);
+
+	if (unlikely(qc->err_mask) && ata_is_dma(qc->tf.protocol))
+		ata_ehi_push_desc(ehi, "BMDMA stat 0x%x", host_stat);
+
+	return handled;
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_port_intr);
+
+/**
+ *	ata_bmdma_interrupt - Default BMDMA ATA host interrupt handler
+ *	@irq: irq line (unused)
+ *	@dev_instance: pointer to our ata_host information structure
+ *
+ *	Default interrupt handler for PCI IDE devices.  Calls
+ *	ata_bmdma_port_intr() for each port that is not disabled.
+ *
+ *	LOCKING:
+ *	Obtains host lock during operation.
+ *
+ *	RETURNS:
+ *	IRQ_NONE or IRQ_HANDLED.
+ */
+irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance)
+{
+	return __ata_sff_interrupt(irq, dev_instance, ata_bmdma_port_intr);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_interrupt);
+
+/**
  *	ata_bmdma_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
  *
@@ -2848,7 +2892,8 @@ void ata_bmdma_error_handler(struct ata_port *ap)
 		/* if we're gonna thaw, make sure IRQ is clear */
 		if (thaw) {
 			ap->ops->sff_check_status(ap);
-			ap->ops->sff_irq_clear(ap);
+			if (ap->ops->sff_irq_clear)
+				ap->ops->sff_irq_clear(ap);
 		}
 	}
 
@@ -2882,6 +2927,28 @@ void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
 EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
 
 /**
+ *	ata_bmdma_irq_clear - Clear PCI IDE BMDMA interrupt.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	Clear interrupt and error flags in DMA status register.
+ *
+ *	May be used as the irq_clear() entry in ata_port_operations.
+ *
+ *	LOCKING:
+ *	spin_lock_irqsave(host lock)
+ */
+void ata_bmdma_irq_clear(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	if (!mmio)
+		return;
+
+	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
+}
+EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
+
+/**
  *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
  *	@qc: Info associated with this ATA transaction.
  *
@@ -3137,7 +3204,100 @@ void ata_pci_bmdma_init(struct ata_host *host)
 }
 EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
 
+/**
+ *	ata_pci_bmdma_prepare_host - helper to prepare PCI BMDMA ATA host
+ *	@pdev: target PCI device
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@r_host: out argument for the initialized ATA host
+ *
+ *	Helper to allocate BMDMA ATA host for @pdev, acquire all PCI
+ *	resources and initialize it accordingly in one go.
+ *
+ *	LOCKING:
+ *	Inherited from calling layer (may sleep).
+ *
+ *	RETURNS:
+ *	0 on success, -errno otherwise.
+ */
+int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+			       const struct ata_port_info * const * ppi,
+			       struct ata_host **r_host)
+{
+	int rc;
+
+	rc = ata_pci_sff_prepare_host(pdev, ppi, r_host);
+	if (rc)
+		return rc;
+
+	ata_pci_bmdma_init(*r_host);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_prepare_host);
+
+/**
+ *	ata_pci_bmdma_init_one - Initialize/register BMDMA PCI IDE controller
+ *	@pdev: Controller to be initialized
+ *	@ppi: array of port_info, must be enough for two ports
+ *	@sht: scsi_host_template to use when registering the host
+ *	@host_priv: host private_data
+ *	@hflags: host flags
+ *
+ *	This function is similar to ata_pci_sff_init_one() but also
+ *	takes care of BMDMA initialization.
+ *
+ *	LOCKING:
+ *	Inherited from PCI layer (may sleep).
+ *
+ *	RETURNS:
+ *	Zero on success, negative on errno-based value on error.
+ */
+int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+			   const struct ata_port_info * const * ppi,
+			   struct scsi_host_template *sht, void *host_priv,
+			   int hflags)
+{
+	struct device *dev = &pdev->dev;
+	const struct ata_port_info *pi;
+	struct ata_host *host = NULL;
+	int rc;
+
+	DPRINTK("ENTER\n");
+
+	pi = ata_sff_find_valid_pi(ppi);
+	if (!pi) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			   "no valid port_info specified\n");
+		return -EINVAL;
+	}
+
+	if (!devres_open_group(dev, NULL, GFP_KERNEL))
+		return -ENOMEM;
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		goto out;
+
+	/* prepare and activate BMDMA host */
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
+	if (rc)
+		goto out;
+	host->private_data = host_priv;
+	host->flags |= hflags;
+
+	pci_set_master(pdev);
+	rc = ata_pci_sff_activate_host(host, ata_bmdma_interrupt, sht);
+ out:
+	if (rc == 0)
+		devres_remove_group(&pdev->dev, NULL);
+	else
+		devres_release_group(&pdev->dev, NULL);
+
+	return rc;
+}
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init_one);
+
 #endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
 
 /**
  *	ata_sff_port_init - Initialize SFF/BMDMA ATA port
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 066b9f3..c8d4703 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -260,7 +260,7 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 			return rc;
 		pcim_pin_device(pdev);
 	}
-	return ata_pci_sff_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &pacpi_sht, NULL, 0);
 }
 
 static const struct pci_device_id pacpi_pci_tbl[] = {
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index f306e10..794ec6e 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -583,7 +583,10 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	        	ppi[0] = &info_20_udma;
 	}
 
-	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+	if (!ppi[0]->mwdma_mask && !ppi[0]->udma_mask)
+		return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL, 0);
+	else
+		return ata_pci_bmdma_init_one(pdev, ppi, &ali_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index d95eca9..620a07c 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -574,7 +574,7 @@ static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* And fire it up */
-	return ata_pci_sff_init_one(pdev, ppi, &amd_sht, hpriv, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &amd_sht, hpriv, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 4d066d6..ba43f0f 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -421,7 +421,7 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	BUG_ON(ppi[0] == NULL);
 
-	return ata_pci_sff_init_one(pdev, ppi, &artop_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &artop_sht, NULL, 0);
 }
 
 static const struct pci_device_id artop_pci_tbl[] = {
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 44d88b3..4375561 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -246,8 +246,8 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		if (!pci_test_config_bits(pdev, &atiixp_enable_bits[i]))
 			ppi[i] = &ata_dummy_port_info;
 
-	return ata_pci_sff_init_one(pdev, ppi, &atiixp_sht, NULL,
-						ATA_HOST_PARALLEL_SCAN);
+	return ata_pci_bmdma_init_one(pdev, ppi, &atiixp_sht, NULL,
+				      ATA_HOST_PARALLEL_SCAN);
 }
 
 static const struct pci_device_id atiixp[] = {
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index bb6e074..9529593 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -525,7 +525,7 @@ static int atp867x_init_one(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 
-	rc = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	rc = ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				IRQF_SHARED, &atp867x_sht);
 	if (rc)
 		dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 6422cfd..9cae65d 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1214,7 +1214,7 @@ static unsigned int bfin_data_xfer(struct ata_device *dev, unsigned char *buf,
  *	bfin_irq_clear - Clear ATAPI interrupt.
  *	@ap: Port associated with this ATA transaction.
  *
- *	Note: Original code is ata_sff_irq_clear().
+ *	Note: Original code is ata_bmdma_irq_clear().
  */
 
 static void bfin_irq_clear(struct ata_port *ap)
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 4c81a71..9f5da1c 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -367,7 +367,7 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
 #endif
 
-	return ata_pci_sff_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 17c5f34..030952f 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -221,7 +221,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 			continue;
 
 		rc = devm_request_irq(&pdev->dev, irq[ap->port_no],
-				      ata_sff_interrupt, 0, DRV_NAME, host);
+				      ata_bmdma_interrupt, 0, DRV_NAME, host);
 		if (rc)
 			return rc;
 
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index e809a42..f792330 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -324,7 +324,7 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ppi[1] = &info_palmax_secondary;
 
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &cs5530_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index a02e645..03a9318 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -198,7 +198,7 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	rdmsr(ATAC_CH0D1_PIO, timings, dummy);
 	if (CS5535_BAD_PIO(timings))
 		wrmsr(ATAC_CH0D1_PIO, 0xF7F4F7F4UL, 0);
-	return ata_pci_sff_init_one(dev, ppi, &cs5535_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &cs5535_sht, NULL, 0);
 }
 
 static const struct pci_device_id cs5535[] = {
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index 914ae35..21ee23f 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -260,7 +260,7 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
-	return ata_pci_sff_init_one(dev, ppi, &cs5536_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &cs5536_sht, NULL, 0);
 }
 
 static const struct pci_device_id cs5536[] = {
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index 0fcc096..6d915b0 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -138,7 +138,7 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 	if (PCI_FUNC(pdev->devfn) != 1)
 		return -ENODEV;
 
-	return ata_pci_sff_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &cy82c693_sht, NULL, 0);
 }
 
 static const struct pci_device_id cy82c693[] = {
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index 3bac0e0..a088347 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -277,8 +277,8 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &efar_sht, NULL,
-					ATA_HOST_PARALLEL_SCAN);
+	return ata_pci_bmdma_init_one(pdev, ppi, &efar_sht, NULL,
+				      ATA_HOST_PARALLEL_SCAN);
 }
 
 static const struct pci_device_id efar_pci_tbl[] = {
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 8580eb3..7688868 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -361,7 +361,7 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 			break;
 	}
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt36x_sht, hpriv, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 98b498b..9ae4c08 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -987,7 +987,7 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	}
 
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt37x_sht, private_data, 0);
 }
 
 static const struct pci_device_id hpt37x[] = {
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 8b95aeb..32f3463 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -548,7 +548,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 		outb(inb(iobase + 0x9c) | 0x04, iobase + 0x9c);
 
 	/* Now kick off ATA set up */
-	return ata_pci_sff_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &hpt3x2n_sht, hpriv, 0);
 }
 
 static const struct pci_device_id hpt3x2n[] = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index 727a81c..b63d5e2 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -248,7 +248,7 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		ata_port_pbar_desc(ap, 4, offset_cmd[i], "cmd");
 	}
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &hpt3x3_sht);
 }
 
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index b56e8f7..9f2889f 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -470,7 +470,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
 		pata_icside_setup_ioaddr(ap, info->base, info, info->port[i]);
 	}
 
-	return ata_host_activate(host, ec->irq, ata_sff_interrupt, 0,
+	return ata_host_activate(host, ec->irq, ata_bmdma_interrupt, 0,
 				 &pata_icside_sht);
 }
 
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index f971f0d..4d142a2 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -273,7 +273,7 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &it8213_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &it8213_sht, NULL, 0);
 }
 
 static const struct pci_device_id it8213_pci_tbl[] = {
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 2bd2b00..bf88f71 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -933,7 +933,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		else
 			ppi[0] = &info_smart;
 	}
-	return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &it821x_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 565e01e..cb3babb 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -144,7 +144,7 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_sff_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &jmicron_sht, NULL, 0);
 }
 
 static const struct pci_device_id jmicron_pci_tbl[] = {
diff --git a/drivers/ata/pata_macio.c b/drivers/ata/pata_macio.c
index b5b48e7..76640ac 100644
--- a/drivers/ata/pata_macio.c
+++ b/drivers/ata/pata_macio.c
@@ -1110,7 +1110,7 @@ static int __devinit pata_macio_common_init(struct pata_macio_priv	*priv,
 
 	/* Start it up */
 	priv->irq = irq;
-	return ata_host_activate(priv->host, irq, ata_sff_interrupt, 0,
+	return ata_host_activate(priv->host, irq, ata_bmdma_interrupt, 0,
 				 &pata_macio_sht);
 }
 
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index e8ca02e..dd38083 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -153,7 +153,7 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 		return -ENODEV;
 	}
 #endif
-	return ata_pci_sff_init_one(pdev, ppi, &marvell_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &marvell_sht, NULL, 0);
 }
 
 static const struct pci_device_id marvell_pci_tbl[] = {
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 36afe2c..f087ab5 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -659,7 +659,7 @@ mpc52xx_ata_init_one(struct device *dev, struct mpc52xx_ata_priv *priv,
 	ata_port_desc(ap, "ata_regs 0x%lx", raw_ata_regs);
 
 	/* activate host */
-	return ata_host_activate(host, priv->ata_irq, ata_sff_interrupt, 0,
+	return ata_host_activate(host, priv->ata_irq, ata_bmdma_interrupt, 0,
 				 &mpc52xx_ata_sht);
 }
 
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 94f979a..3eb921c 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -82,7 +82,7 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	ata_pci_bmdma_clear_simplex(pdev);
 
 	/* And let the library code do the work */
-	return ata_pci_sff_init_one(pdev, port_info, &netcell_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, port_info, &netcell_sht, NULL, 0);
 }
 
 static const struct pci_device_id netcell_pci_tbl[] = {
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index dd53a66..cc50bd0 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -149,7 +149,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 
 	ninja32_program(base);
 	/* FIXME: Should we disable them at remove ? */
-	return ata_host_activate(host, dev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, dev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &ninja32_sht);
 }
 
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index fdbba2d..605f198 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -380,7 +380,7 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
 	ns87415_fixup(pdev);
 
-	return ata_pci_sff_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &ns87415_sht, NULL, 0);
 }
 
 static const struct pci_device_id ns87415_pci_tbl[] = {
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 3001109..06ddd91 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -750,20 +750,6 @@ static void octeon_cf_dev_config(struct ata_device *dev)
 }
 
 /*
- * Trap if driver tries to do standard bmdma commands.  They are not
- * supported.
- */
-static void unreachable_qc(struct ata_queued_cmd *qc)
-{
-	BUG();
-}
-
-static u8 unreachable_port(struct ata_port *ap)
-{
-	BUG();
-}
-
-/*
  * We don't do ATAPI DMA so return 0.
  */
 static int octeon_cf_check_atapi_dma(struct ata_queued_cmd *qc)
@@ -804,10 +790,6 @@ static struct ata_port_operations octeon_cf_ops = {
 	.sff_dev_select		= octeon_cf_dev_select,
 	.sff_irq_on		= octeon_cf_irq_on,
 	.sff_irq_clear		= octeon_cf_irq_clear,
-	.bmdma_setup		= unreachable_qc,
-	.bmdma_start		= unreachable_qc,
-	.bmdma_stop		= unreachable_qc,
-	.bmdma_status		= unreachable_port,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= octeon_cf_set_piomode,
 	.set_dmamode		= octeon_cf_set_dmamode,
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 988ef26..b811c16 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -248,7 +248,7 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &oldpiix_sht, NULL, 0);
 }
 
 static const struct pci_device_id oldpiix_pci_tbl[] = {
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 76b7d12..0852cd0 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -429,7 +429,7 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (optiplus_with_udma(dev))
 		ppi[0] = &info_82c700_udma;
 
-	return ata_pci_sff_init_one(dev, ppi, &optidma_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &optidma_sht, NULL, 0);
 }
 
 static const struct pci_device_id optidma[] = {
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index 09f1f22..b183511 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -754,7 +754,7 @@ static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_de
 		return -EIO;
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &pdc2027x_sht);
 }
 
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index fa1e2f3..c39f213 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -337,7 +337,7 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 				return -ENODEV;
 		}
 	}
-	return ata_pci_sff_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &pdc202xx_sht, NULL, 0);
 }
 
 static const struct pci_device_id pdc202xx[] = {
diff --git a/drivers/ata/pata_piccolo.c b/drivers/ata/pata_piccolo.c
index 9816154..cb01bf9 100644
--- a/drivers/ata/pata_piccolo.c
+++ b/drivers/ata/pata_piccolo.c
@@ -95,7 +95,7 @@ static int ata_tosh_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
 	/* Just one port for the moment */
-	return ata_pci_sff_init_one(dev, ppi, &tosh_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &tosh_sht, NULL, 0);
 }
 
 static struct pci_device_id ata_tosh[] = {
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index a5fa388..8574b31 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -227,7 +227,7 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &radisys_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &radisys_sht, NULL, 0);
 }
 
 static const struct pci_device_id radisys_pci_tbl[] = {
diff --git a/drivers/ata/pata_rdc.c b/drivers/ata/pata_rdc.c
index 37092cf..5fbe9b1 100644
--- a/drivers/ata/pata_rdc.c
+++ b/drivers/ata/pata_rdc.c
@@ -344,7 +344,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev,
 	 */
 	pci_read_config_dword(pdev, 0x54, &hpriv->saved_iocfg);
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	host->private_data = hpriv;
@@ -354,7 +354,7 @@ static int __devinit rdc_init_one(struct pci_dev *pdev,
 	host->flags |= ATA_HOST_PARALLEL_SCAN;
 
 	pci_set_master(pdev);
-	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &rdc_sht);
+	return ata_pci_sff_activate_host(host, ata_bmdma_interrupt, &rdc_sht);
 }
 
 static void rdc_remove_one(struct pci_dev *pdev)
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 6b5b63a..e2c1825 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -237,7 +237,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
 
-	return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &sc1200_sht, NULL, 0);
 }
 
 static const struct pci_device_id sc1200[] = {
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 6f6193b..d9db3f8 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -875,7 +875,7 @@ static void scc_postreset(struct ata_link *link, unsigned int *classes)
  *	scc_irq_clear - Clear PCI IDE BMDMA interrupt.
  *	@ap: Port associated with this ATA transaction.
  *
- *	Note: Original code is ata_sff_irq_clear().
+ *	Note: Original code is ata_bmdma_irq_clear().
  */
 
 static void scc_irq_clear (struct ata_port *ap)
@@ -1105,7 +1105,7 @@ static int scc_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (rc)
 		return rc;
 
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &scc_sht);
 }
 
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index 86b3d01..e97b32f 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -179,7 +179,7 @@ static int __devinit sch_init_one(struct pci_dev *pdev,
 		dev_printk(KERN_DEBUG, &pdev->dev,
 			   "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(pdev, ppi, &sch_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &sch_sht, NULL, 0);
 }
 
 static int __init sch_init(void)
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 43ea389..86dd714 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -460,7 +460,7 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	if (pdev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
 		ata_pci_bmdma_clear_simplex(pdev);
 
-	return ata_pci_sff_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &serverworks_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 43faf10..d3190d7 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -374,11 +374,11 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 	ata_sff_std_ports(&host->ports[1]->ioaddr);
 
 	/* Register & activate */
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &sil680_sht);
 
 use_ioports:
-	return ata_pci_sff_init_one(pdev, ppi, &sil680_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &sil680_sht, NULL, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index b670803..60cea13 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -826,7 +826,7 @@ static int sis_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	sis_fixup(pdev, chipset);
 
-	return ata_pci_sff_init_one(pdev, ppi, &sis_sht, chipset, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &sis_sht, chipset, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 733b042..98548f6 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -316,7 +316,7 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
 	pci_write_config_dword(dev, 0x40, val);
 
-	return ata_pci_sff_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &sl82c105_sht, NULL, 0);
 }
 
 static const struct pci_device_id sl82c105[] = {
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index 48f5060..0d1f89e 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -201,7 +201,7 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &dev->dev, "version " DRV_VERSION "\n");
 
-	return ata_pci_sff_init_one(dev, ppi, &triflex_sht, NULL, 0);
+	return ata_pci_bmdma_init_one(dev, ppi, &triflex_sht, NULL, 0);
 }
 
 static const struct pci_device_id triflex[] = {
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 7e3e0a5..5e65988 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -627,7 +627,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	/* We have established the device type, now fire it up */
-	return ata_pci_sff_init_one(pdev, ppi, &via_sht, (void *)config, 0);
+	return ata_pci_bmdma_init_one(pdev, ppi, &via_sht, (void *)config, 0);
 }
 
 #ifdef CONFIG_PM
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f3471bc..a476cd9 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -675,8 +675,6 @@ static struct ata_port_operations mv5_ops = {
 	.freeze			= mv_eh_freeze,
 	.thaw			= mv_eh_thaw,
 	.hardreset		= mv_hardreset,
-	.error_handler		= ata_std_error_handler, /* avoid SFF EH */
-	.post_internal_cmd	= ATA_OP_NULL,
 
 	.scr_read		= mv5_scr_read,
 	.scr_write		= mv5_scr_write,
@@ -2813,7 +2811,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause)
 	} else if (!edma_was_enabled) {
 		struct ata_queued_cmd *qc = mv_get_active_qc(ap);
 		if (qc)
-			ata_sff_host_intr(ap, qc);
+			ata_bmdma_port_intr(ap, qc);
 		else
 			mv_unexpected_intr(ap, edma_was_enabled);
 	}
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index baa8f0d..6fd1147 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -920,7 +920,7 @@ static int nv_host_intr(struct ata_port *ap, u8 irq_stat)
 	}
 
 	/* handle interrupt */
-	return ata_sff_host_intr(ap, qc);
+	return ata_bmdma_port_intr(ap, qc);
 }
 
 static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance)
@@ -1100,7 +1100,7 @@ static void nv_adma_irq_clear(struct ata_port *ap)
 	u32 notifier_clears[2];
 
 	if (pp->flags & NV_ADMA_ATAPI_SETUP_COMPLETE) {
-		ata_sff_irq_clear(ap);
+		ata_bmdma_irq_clear(ap);
 		return;
 	}
 
@@ -1505,7 +1505,7 @@ static irqreturn_t nv_generic_interrupt(int irq, void *dev_instance)
 
 		qc = ata_qc_from_tag(ap, ap->link.active_tag);
 		if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING))) {
-			handled += ata_sff_host_intr(ap, qc);
+			handled += ata_bmdma_port_intr(ap, qc);
 		} else {
 			/*
 			 * No request pending?  Clear interrupt status
@@ -2430,7 +2430,7 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	ppi[0] = &nv_port_info[type];
 	ipriv = ppi[0]->private_data;
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index d533b3d..daeebf1 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -120,8 +120,6 @@ static void qs_host_stop(struct ata_host *host);
 static void qs_qc_prep(struct ata_queued_cmd *qc);
 static unsigned int qs_qc_issue(struct ata_queued_cmd *qc);
 static int qs_check_atapi_dma(struct ata_queued_cmd *qc);
-static void qs_bmdma_stop(struct ata_queued_cmd *qc);
-static u8 qs_bmdma_status(struct ata_port *ap);
 static void qs_freeze(struct ata_port *ap);
 static void qs_thaw(struct ata_port *ap);
 static int qs_prereset(struct ata_link *link, unsigned long deadline);
@@ -137,8 +135,6 @@ static struct ata_port_operations qs_ata_ops = {
 	.inherits		= &ata_sff_port_ops,
 
 	.check_atapi_dma	= qs_check_atapi_dma,
-	.bmdma_stop		= qs_bmdma_stop,
-	.bmdma_status		= qs_bmdma_status,
 	.qc_prep		= qs_qc_prep,
 	.qc_issue		= qs_qc_issue,
 
@@ -190,16 +186,6 @@ static int qs_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 1;	/* ATAPI DMA not supported */
 }
 
-static void qs_bmdma_stop(struct ata_queued_cmd *qc)
-{
-	/* nothing */
-}
-
-static u8 qs_bmdma_status(struct ata_port *ap)
-{
-	return 0;
-}
-
 static inline void qs_enter_reg_mode(struct ata_port *ap)
 {
 	u8 __iomem *chan = qs_mmio_base(ap->host) + (ap->port_no * 0x4000);
@@ -454,7 +440,7 @@ static inline unsigned int qs_intr_mmio(struct ata_host *host)
 		if (!pp || pp->state != qs_state_mmio)
 			continue;
 		if (!(qc->tf.flags & ATA_TFLAG_POLLING))
-			handled |= ata_sff_host_intr(ap, qc);
+			handled |= ata_sff_port_intr(ap, qc);
 	}
 	return handled;
 }
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 2dda312..3a4f842 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -503,7 +503,7 @@ static void sil_host_intr(struct ata_port *ap, u32 bmdma2)
 		goto err_hsm;
 
 	/* ack bmdma irq events */
-	ata_sff_irq_clear(ap);
+	ata_bmdma_irq_clear(ap);
 
 	/* kick HSM in the ass */
 	ata_sff_hsm_move(ap, qc, status, 0);
@@ -584,7 +584,7 @@ static void sil_thaw(struct ata_port *ap)
 
 	/* clear IRQ */
 	ap->ops->sff_check_status(ap);
-	ata_sff_irq_clear(ap);
+	ata_bmdma_irq_clear(ap);
 
 	/* turn on SATA IRQ if supported */
 	if (!(ap->flags & SIL_FLAG_NO_SATA_IRQ))
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index f8a91bf..2bfe3ae 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -279,7 +279,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		break;
 	}
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 
@@ -308,7 +308,7 @@ static int sis_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &sis_sht);
 }
 
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 101fd6a..7d9db4a 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -502,7 +502,7 @@ static int k2_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *en
 	writel(0x0, mmio_base + K2_SATA_SIM_OFFSET);
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &k2_sata_sht);
 }
 
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index d8dac17..b8578c3 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -242,7 +242,7 @@ static int uli_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	pci_set_master(pdev);
 	pci_intx(pdev, 1);
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &uli_sht);
 }
 
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 08f6549..101d8c2 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -308,7 +308,7 @@ static void svia_noop_freeze(struct ata_port *ap)
 	 * certain way.  Leave it alone and just clear pending IRQ.
 	 */
 	ap->ops->sff_check_status(ap);
-	ata_sff_irq_clear(ap);
+	ata_bmdma_irq_clear(ap);
 }
 
 /**
@@ -463,7 +463,7 @@ static int vt6420_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int rc;
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;
@@ -520,7 +520,7 @@ static int vt8251_prepare_host(struct pci_dev *pdev, struct ata_host **r_host)
 	struct ata_host *host;
 	int i, rc;
 
-	rc = ata_pci_sff_prepare_host(pdev, ppi, &host);
+	rc = ata_pci_bmdma_prepare_host(pdev, ppi, &host);
 	if (rc)
 		return rc;
 	*r_host = host;
@@ -628,7 +628,7 @@ static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	svia_configure(pdev);
 
 	pci_set_master(pdev);
-	return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+	return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 				 IRQF_SHARED, &svia_sht);
 }
 
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index 2107952..b777176 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -245,7 +245,7 @@ static void vsc_port_intr(u8 port_status, struct ata_port *ap)
 
 	qc = ata_qc_from_tag(ap, ap->link.active_tag);
 	if (qc && likely(!(qc->tf.flags & ATA_TFLAG_POLLING)))
-		handled = ata_sff_host_intr(ap, qc);
+		handled = ata_bmdma_port_intr(ap, qc);
 
 	/* We received an interrupt during a polled command,
 	 * or some other spurious condition.  Interrupt reporting
diff --git a/include/linux/libata.h b/include/linux/libata.h
index ee84e7e..3bad270 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -386,6 +386,7 @@ enum {
 	ATA_HORKAGE_1_5_GBPS	= (1 << 13),	/* force 1.5 Gbps */
 	ATA_HORKAGE_NOSETXFER	= (1 << 14),	/* skip SETXFER, SATA only */
 	ATA_HORKAGE_BROKEN_FPDMA_AA	= (1 << 15),	/* skip AA */
+	ATA_HORKAGE_DUMP_ID	= (1 << 16),	/* dump IDENTIFY data */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
@@ -513,7 +514,9 @@ struct ata_ioports {
 	void __iomem		*command_addr;
 	void __iomem		*altstatus_addr;
 	void __iomem		*ctl_addr;
+#ifdef CONFIG_ATA_BMDMA
 	void __iomem		*bmdma_addr;
+#endif /* CONFIG_ATA_BMDMA */
 	void __iomem		*scr_addr;
 };
 #endif /* CONFIG_ATA_SFF */
@@ -721,8 +724,10 @@ struct ata_port {
 	u8			ctl;	/* cache of ATA control register */
 	u8			last_ctl;	/* Cache last written value */
 	struct delayed_work	sff_pio_task;
+#ifdef CONFIG_ATA_BMDMA
 	struct ata_bmdma_prd	*bmdma_prd;	/* BMDMA SG list */
 	dma_addr_t		bmdma_prd_dma;	/* and its DMA mapping */
+#endif /* CONFIG_ATA_BMDMA */
 #endif /* CONFIG_ATA_SFF */
 
 	unsigned int		pio_mask;
@@ -856,10 +861,12 @@ struct ata_port_operations {
 	void (*sff_irq_clear)(struct ata_port *);
 	void (*sff_drain_fifo)(struct ata_queued_cmd *qc);
 
+#ifdef CONFIG_ATA_BMDMA
 	void (*bmdma_setup)(struct ata_queued_cmd *qc);
 	void (*bmdma_start)(struct ata_queued_cmd *qc);
 	void (*bmdma_stop)(struct ata_queued_cmd *qc);
 	u8   (*bmdma_status)(struct ata_port *ap);
+#endif /* CONFIG_ATA_BMDMA */
 #endif /* CONFIG_ATA_SFF */
 
 	ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -1555,7 +1562,6 @@ extern void sata_pmp_error_handler(struct ata_port *ap);
 #ifdef CONFIG_ATA_SFF
 
 extern const struct ata_port_operations ata_sff_port_ops;
-extern const struct ata_port_operations ata_bmdma_port_ops;
 extern const struct ata_port_operations ata_bmdma32_port_ops;
 
 /* PIO only, sg_tablesize and dma_boundary limits can be removed */
@@ -1564,11 +1570,6 @@ extern const struct ata_port_operations ata_bmdma32_port_ops;
 	.sg_tablesize		= LIBATA_MAX_PRD,		\
 	.dma_boundary		= ATA_DMA_BOUNDARY
 
-#define ATA_BMDMA_SHT(drv_name)					\
-	ATA_BASE_SHT(drv_name),					\
-	.sg_tablesize		= LIBATA_MAX_PRD,		\
-	.dma_boundary		= ATA_DMA_BOUNDARY
-
 extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device);
 extern u8 ata_sff_check_status(struct ata_port *ap);
 extern void ata_sff_pause(struct ata_port *ap);
@@ -1593,7 +1594,7 @@ extern int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc,
 extern void ata_sff_queue_pio_task(struct ata_port *ap, unsigned long delay);
 extern unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc);
 extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
-extern unsigned int ata_sff_host_intr(struct ata_port *ap,
+extern unsigned int ata_sff_port_intr(struct ata_port *ap,
 				      struct ata_queued_cmd *qc);
 extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
 extern void ata_sff_lost_interrupt(struct ata_port *ap);
@@ -1625,11 +1626,24 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev,
 		struct scsi_host_template *sht, void *host_priv, int hflags);
 #endif /* CONFIG_PCI */
 
+#ifdef CONFIG_ATA_BMDMA
+
+extern const struct ata_port_operations ata_bmdma_port_ops;
+
+#define ATA_BMDMA_SHT(drv_name)					\
+	ATA_BASE_SHT(drv_name),					\
+	.sg_tablesize		= LIBATA_MAX_PRD,		\
+	.dma_boundary		= ATA_DMA_BOUNDARY
+
 extern void ata_bmdma_qc_prep(struct ata_queued_cmd *qc);
 extern unsigned int ata_bmdma_qc_issue(struct ata_queued_cmd *qc);
 extern void ata_bmdma_dumb_qc_prep(struct ata_queued_cmd *qc);
+extern unsigned int ata_bmdma_port_intr(struct ata_port *ap,
+				      struct ata_queued_cmd *qc);
+extern irqreturn_t ata_bmdma_interrupt(int irq, void *dev_instance);
 extern void ata_bmdma_error_handler(struct ata_port *ap);
 extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_bmdma_irq_clear(struct ata_port *ap);
 extern void ata_bmdma_setup(struct ata_queued_cmd *qc);
 extern void ata_bmdma_start(struct ata_queued_cmd *qc);
 extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
@@ -1640,7 +1654,15 @@ extern int ata_bmdma_port_start32(struct ata_port *ap);
 #ifdef CONFIG_PCI
 extern int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev);
 extern void ata_pci_bmdma_init(struct ata_host *host);
+extern int ata_pci_bmdma_prepare_host(struct pci_dev *pdev,
+				      const struct ata_port_info * const * ppi,
+				      struct ata_host **r_host);
+extern int ata_pci_bmdma_init_one(struct pci_dev *pdev,
+				  const struct ata_port_info * const * ppi,
+				  struct scsi_host_template *sht,
+				  void *host_priv, int hflags);
 #endif /* CONFIG_PCI */
+#endif /* CONFIG_ATA_BMDMA */
 
 /**
  *	ata_sff_busy_wait - Wait for a port status register

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-12-19 19:05 ` Linus Torvalds
@ 2009-12-19 20:11   ` Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-12-19 20:11 UTC (permalink / raw)
  To: Linus Torvalds; +Cc: Andrew Morton, linux-ide, LKML, saeed bishara

On 12/19/2009 02:05 PM, Linus Torvalds wrote:
> On Sat, 19 Dec 2009, Jeff Garzik wrote:
>>
>> to receive the following updates:
>>
>>   drivers/ata/libata-scsi.c    |    2 +-
>>   drivers/ata/libata-sff.c     |    2 +-
>>   drivers/ata/pata_hpt3x2n.c   |   64 ++++++++++---------
>>   drivers/ata/pata_octeon_cf.c |    2 +-
>>   drivers/ata/sata_mv.c        |  144 ++++++++++++++++++++++++++++++++++++------
>>   5 files changed, 163 insertions(+), 51 deletions(-)
>>   mode change 100644 =>  100755 drivers/ata/sata_mv.c
>
> WTF is that mode change?
>
> It's introduced by commit 6481f2b52cd5411ea6342b749daf0e4f3b390d7b:
> "sata_mv: add power management support for the platform driver", and it's
> totally nonsensical.
>
> I fixed that crazy stuff when merging, but you should look at your own
> summaries a bit, and should have noticed that it was crazy. That file
> isn't an executable.

Whoops, you're absolutely right.  That's broken.

	Jeff




^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-12-19 18:13 Jeff Garzik
@ 2009-12-19 19:05 ` Linus Torvalds
  2009-12-19 20:11   ` Jeff Garzik
  0 siblings, 1 reply; 95+ messages in thread
From: Linus Torvalds @ 2009-12-19 19:05 UTC (permalink / raw)
  To: Jeff Garzik; +Cc: Andrew Morton, linux-ide, LKML



On Sat, 19 Dec 2009, Jeff Garzik wrote:
> 
> to receive the following updates:
> 
>  drivers/ata/libata-scsi.c    |    2 +-
>  drivers/ata/libata-sff.c     |    2 +-
>  drivers/ata/pata_hpt3x2n.c   |   64 ++++++++++---------
>  drivers/ata/pata_octeon_cf.c |    2 +-
>  drivers/ata/sata_mv.c        |  144 ++++++++++++++++++++++++++++++++++++------
>  5 files changed, 163 insertions(+), 51 deletions(-)
>  mode change 100644 => 100755 drivers/ata/sata_mv.c

WTF is that mode change?

It's introduced by commit 6481f2b52cd5411ea6342b749daf0e4f3b390d7b: 
"sata_mv: add power management support for the platform driver", and it's 
totally nonsensical.

I fixed that crazy stuff when merging, but you should look at your own 
summaries a bit, and should have noticed that it was crazy. That file 
isn't an executable.

			Linus

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-12-19 18:13 Jeff Garzik
  2009-12-19 19:05 ` Linus Torvalds
  0 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2009-12-19 18:13 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Various fixes, and sata_mv suspend/resume support.



Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/libata-scsi.c    |    2 +-
 drivers/ata/libata-sff.c     |    2 +-
 drivers/ata/pata_hpt3x2n.c   |   64 ++++++++++---------
 drivers/ata/pata_octeon_cf.c |    2 +-
 drivers/ata/sata_mv.c        |  144 ++++++++++++++++++++++++++++++++++++------
 5 files changed, 163 insertions(+), 51 deletions(-)
 mode change 100644 => 100755 drivers/ata/sata_mv.c

Christoph Hellwig (1):
      libata: use the WRITE_SAME_16 define

H Hartley Sweeten (1):
      pata_octeon_cf: use resource_size(), to fix resource sizing bug

Jeff Garzik (1):
      sata_mv: remove pointless NULL test

Robert Hancock (1):
      libata: fix reporting of drained bytes when clearing DRQ

Saeed Bishara (6):
      sata_mv: increase PIO IORDY timeout
      sata_mv: support clkdev framework
      sata_mv: add power management support for the platform driver
      sata_mv: move the PCI bar description initialization code
      sata_mv: store the board_idx into the host private data
      sata_mv: add power management support for the PCI controllers.

Sergei Shtylyov (1):
      pata_hpt3x2n: fix clock turnaround

diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 1683ebd..f4ea5a8 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -3022,7 +3022,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd)
 	case WRITE_16:
 		return ata_scsi_rw_xlat;
 
-	case 0x93 /*WRITE_SAME_16*/:
+	case WRITE_SAME_16:
 		return ata_scsi_write_same_xlat;
 
 	case SYNCHRONIZE_CACHE:
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index efa8773..741065c 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -2275,7 +2275,7 @@ void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
 	ap = qc->ap;
 	/* Drain up to 64K of data before we give up this recovery method */
 	for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
-						&& count < 32768; count++)
+						&& count < 65536; count += 2)
 		ioread16(ap->ioaddr.data_addr);
 
 	/* Can become DEBUG later */
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index 9a09a1b..dd26bc7 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -8,7 +8,7 @@
  * Copyright (C) 1999-2003		Andre Hedrick <andre@linux-ide.org>
  * Portions Copyright (C) 2001	        Sun Microsystems, Inc.
  * Portions Copyright (C) 2003		Red Hat Inc
- * Portions Copyright (C) 2005-2007	MontaVista Software, Inc.
+ * Portions Copyright (C) 2005-2009	MontaVista Software, Inc.
  *
  *
  * TODO
@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.7"
+#define DRV_VERSION	"0.3.8"
 
 enum {
 	HPT_PCI_FAST	=	(1 << 31),
@@ -264,7 +264,7 @@ static void hpt3x2n_bmdma_stop(struct ata_queued_cmd *qc)
 
 static void hpt3x2n_set_clock(struct ata_port *ap, int source)
 {
-	void __iomem *bmdma = ap->ioaddr.bmdma_addr;
+	void __iomem *bmdma = ap->ioaddr.bmdma_addr - ap->port_no * 8;
 
 	/* Tristate the bus */
 	iowrite8(0x80, bmdma+0x73);
@@ -274,9 +274,9 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source)
 	iowrite8(source, bmdma+0x7B);
 	iowrite8(0xC0, bmdma+0x79);
 
-	/* Reset state machines */
-	iowrite8(0x37, bmdma+0x70);
-	iowrite8(0x37, bmdma+0x74);
+	/* Reset state machines, avoid enabling the disabled channels */
+	iowrite8(ioread8(bmdma+0x70) | 0x32, bmdma+0x70);
+	iowrite8(ioread8(bmdma+0x74) | 0x32, bmdma+0x74);
 
 	/* Complete reset */
 	iowrite8(0x00, bmdma+0x79);
@@ -286,21 +286,10 @@ static void hpt3x2n_set_clock(struct ata_port *ap, int source)
 	iowrite8(0x00, bmdma+0x77);
 }
 
-/* Check if our partner interface is busy */
-
-static int hpt3x2n_pair_idle(struct ata_port *ap)
-{
-	struct ata_host *host = ap->host;
-	struct ata_port *pair = host->ports[ap->port_no ^ 1];
-
-	if (pair->hsm_task_state == HSM_ST_IDLE)
-		return 1;
-	return 0;
-}
-
 static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
 {
 	long flags = (long)ap->host->private_data;
+
 	/* See if we should use the DPLL */
 	if (writing)
 		return USE_DPLL;	/* Needed for write */
@@ -309,20 +298,35 @@ static int hpt3x2n_use_dpll(struct ata_port *ap, int writing)
 	return 0;
 }
 
+static int hpt3x2n_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct ata_port *alt = ap->host->ports[ap->port_no ^ 1];
+	int rc, flags = (long)ap->host->private_data;
+	int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE);
+
+	/* First apply the usual rules */
+	rc = ata_std_qc_defer(qc);
+	if (rc != 0)
+		return rc;
+
+	if ((flags & USE_DPLL) != dpll && alt->qc_active)
+		return ATA_DEFER_PORT;
+	return 0;
+}
+
 static unsigned int hpt3x2n_qc_issue(struct ata_queued_cmd *qc)
 {
-	struct ata_taskfile *tf = &qc->tf;
 	struct ata_port *ap = qc->ap;
 	int flags = (long)ap->host->private_data;
+	int dpll = hpt3x2n_use_dpll(ap, qc->tf.flags & ATA_TFLAG_WRITE);
 
-	if (hpt3x2n_pair_idle(ap)) {
-		int dpll = hpt3x2n_use_dpll(ap, (tf->flags & ATA_TFLAG_WRITE));
-		if ((flags & USE_DPLL) != dpll) {
-			if (dpll == 1)
-				hpt3x2n_set_clock(ap, 0x21);
-			else
-				hpt3x2n_set_clock(ap, 0x23);
-		}
+	if ((flags & USE_DPLL) != dpll) {
+		flags &= ~USE_DPLL;
+		flags |= dpll;
+		ap->host->private_data = (void *)(long)flags;
+
+		hpt3x2n_set_clock(ap, dpll ? 0x21 : 0x23);
 	}
 	return ata_sff_qc_issue(qc);
 }
@@ -339,6 +343,8 @@ static struct ata_port_operations hpt3x2n_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 
 	.bmdma_stop	= hpt3x2n_bmdma_stop,
+
+	.qc_defer	= hpt3x2n_qc_defer,
 	.qc_issue	= hpt3x2n_qc_issue,
 
 	.cable_detect	= hpt3x2n_cable_detect,
@@ -454,7 +460,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	unsigned int f_low, f_high;
 	int adjust;
 	unsigned long iobase = pci_resource_start(dev, 4);
-	void *hpriv = NULL;
+	void *hpriv = (void *)USE_DPLL;
 	int rc;
 
 	rc = pcim_enable_device(dev);
@@ -539,7 +545,7 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* Set our private data up. We only need a few flags so we use
 	   it directly */
 	if (pci_mhz > 60) {
-		hpriv = (void *)PCI66;
+		hpriv = (void *)(PCI66 | USE_DPLL);
 		/*
 		 * On  HPT371N, if ATA clock is 66 MHz we must set bit 2 in
 		 * the MISC. register to stretch the UltraDMA Tss timing.
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index d6f6956..37ef416 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -853,7 +853,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
 			return -EINVAL;
 
 		cs1 = devm_ioremap_nocache(&pdev->dev, res_cs1->start,
-					   res_cs0->end - res_cs1->start + 1);
+					   resource_size(res_cs1));
 
 		if (!cs1)
 			return -ENOMEM;
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
old mode 100644
new mode 100755
index a8a7be0..df8ee32
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -59,6 +59,7 @@
 #include <linux/dmapool.h>
 #include <linux/dma-mapping.h>
 #include <linux/device.h>
+#include <linux/clk.h>
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 #include <linux/mbus.h>
@@ -538,6 +539,7 @@ struct mv_port_signal {
 
 struct mv_host_priv {
 	u32			hp_flags;
+	unsigned int 		board_idx;
 	u32			main_irq_mask;
 	struct mv_port_signal	signal[8];
 	const struct mv_hw_ops	*ops;
@@ -548,6 +550,10 @@ struct mv_host_priv {
 	u32			irq_cause_offset;
 	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
+
+#if defined(CONFIG_HAVE_CLK)
+	struct clk		*clk;
+#endif
 	/*
 	 * These consistent DMA memory pools give us guaranteed
 	 * alignment for hardware-accessed data structures,
@@ -2775,7 +2781,7 @@ static void mv_port_intr(struct ata_port *ap, u32 port_cause)
 	struct mv_port_priv *pp;
 	int edma_was_enabled;
 
-	if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+	if (ap->flags & ATA_FLAG_DISABLED) {
 		mv_unexpected_intr(ap, 0);
 		return;
 	}
@@ -3393,7 +3399,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
 	ZERO(0x024);		/* respq outp */
 	ZERO(0x020);		/* respq inp */
 	ZERO(0x02c);		/* test control */
-	writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
+	writel(0x800, port_mmio + EDMA_IORDY_TMOUT);
 }
 
 #undef ZERO
@@ -3854,7 +3860,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 /**
  *      mv_init_host - Perform some early initialization of the host.
  *	@host: ATA host to initialize
- *      @board_idx: controller index
  *
  *      If possible, do an early global reset of the host.  Then do
  *      our port init and clear/unmask all/relevant host interrupts.
@@ -3862,13 +3867,13 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
  *      LOCKING:
  *      Inherited from caller.
  */
-static int mv_init_host(struct ata_host *host, unsigned int board_idx)
+static int mv_init_host(struct ata_host *host)
 {
 	int rc = 0, n_hc, port, hc;
 	struct mv_host_priv *hpriv = host->private_data;
 	void __iomem *mmio = hpriv->base;
 
-	rc = mv_chip_id(host, board_idx);
+	rc = mv_chip_id(host, hpriv->board_idx);
 	if (rc)
 		goto done;
 
@@ -3905,14 +3910,6 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 		void __iomem *port_mmio = mv_port_base(mmio, port);
 
 		mv_port_init(&ap->ioaddr, port_mmio);
-
-#ifdef CONFIG_PCI
-		if (!IS_SOC(hpriv)) {
-			unsigned int offset = port_mmio - mmio;
-			ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
-			ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
-		}
-#endif
 	}
 
 	for (hc = 0; hc < n_hc; hc++) {
@@ -4035,12 +4032,21 @@ static int mv_platform_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
+	hpriv->board_idx = chip_soc;
 
 	host->iomap = NULL;
 	hpriv->base = devm_ioremap(&pdev->dev, res->start,
 				   resource_size(res));
 	hpriv->base -= SATAHC0_REG_BASE;
 
+#if defined(CONFIG_HAVE_CLK)
+	hpriv->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(hpriv->clk))
+		dev_notice(&pdev->dev, "cannot get clkdev\n");
+	else
+		clk_enable(hpriv->clk);
+#endif
+
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
 	 */
@@ -4049,12 +4055,12 @@ static int mv_platform_probe(struct platform_device *pdev)
 
 	rc = mv_create_dma_pools(hpriv, &pdev->dev);
 	if (rc)
-		return rc;
+		goto err;
 
 	/* initialize adapter */
-	rc = mv_init_host(host, chip_soc);
+	rc = mv_init_host(host);
 	if (rc)
-		return rc;
+		goto err;
 
 	dev_printk(KERN_INFO, &pdev->dev,
 		   "slots %u ports %d\n", (unsigned)MV_MAX_Q_DEPTH,
@@ -4062,6 +4068,15 @@ static int mv_platform_probe(struct platform_device *pdev)
 
 	return ata_host_activate(host, platform_get_irq(pdev, 0), mv_interrupt,
 				 IRQF_SHARED, &mv6_sht);
+err:
+#if defined(CONFIG_HAVE_CLK)
+	if (!IS_ERR(hpriv->clk)) {
+		clk_disable(hpriv->clk);
+		clk_put(hpriv->clk);
+	}
+#endif
+
+	return rc;
 }
 
 /*
@@ -4076,14 +4091,66 @@ static int __devexit mv_platform_remove(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct ata_host *host = dev_get_drvdata(dev);
-
+#if defined(CONFIG_HAVE_CLK)
+	struct mv_host_priv *hpriv = host->private_data;
+#endif
 	ata_host_detach(host);
+
+#if defined(CONFIG_HAVE_CLK)
+	if (!IS_ERR(hpriv->clk)) {
+		clk_disable(hpriv->clk);
+		clk_put(hpriv->clk);
+	}
+#endif
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int mv_platform_suspend(struct platform_device *pdev, pm_message_t state)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	if (host)
+		return ata_host_suspend(host, state);
+	else
+		return 0;
+}
+
+static int mv_platform_resume(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int ret;
+
+	if (host) {
+		struct mv_host_priv *hpriv = host->private_data;
+		const struct mv_sata_platform_data *mv_platform_data = \
+			pdev->dev.platform_data;
+		/*
+		 * (Re-)program MBUS remapping windows if we are asked to.
+		 */
+		if (mv_platform_data->dram != NULL)
+			mv_conf_mbus_windows(hpriv, mv_platform_data->dram);
+
+		/* initialize adapter */
+		ret = mv_init_host(host);
+		if (ret) {
+			printk(KERN_ERR DRV_NAME ": Error during HW init\n");
+			return ret;
+		}
+		ata_host_resume(host);
+	}
+
+	return 0;
+}
+#else
+#define mv_platform_suspend NULL
+#define mv_platform_resume NULL
+#endif
+
 static struct platform_driver mv_platform_driver = {
 	.probe			= mv_platform_probe,
 	.remove			= __devexit_p(mv_platform_remove),
+	.suspend		= mv_platform_suspend,
+	.resume			= mv_platform_resume,
 	.driver			= {
 				   .name = DRV_NAME,
 				   .owner = THIS_MODULE,
@@ -4094,6 +4161,9 @@ static struct platform_driver mv_platform_driver = {
 #ifdef CONFIG_PCI
 static int mv_pci_init_one(struct pci_dev *pdev,
 			   const struct pci_device_id *ent);
+#ifdef CONFIG_PM
+static int mv_pci_device_resume(struct pci_dev *pdev);
+#endif
 
 
 static struct pci_driver mv_pci_driver = {
@@ -4101,6 +4171,11 @@ static struct pci_driver mv_pci_driver = {
 	.id_table		= mv_pci_tbl,
 	.probe			= mv_pci_init_one,
 	.remove			= ata_pci_remove_one,
+#ifdef CONFIG_PM
+	.suspend		= ata_pci_device_suspend,
+	.resume			= mv_pci_device_resume,
+#endif
+
 };
 
 /* move to PCI layer or libata core? */
@@ -4194,7 +4269,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 	const struct ata_port_info *ppi[] = { &mv_port_info[board_idx], NULL };
 	struct ata_host *host;
 	struct mv_host_priv *hpriv;
-	int n_ports, rc;
+	int n_ports, port, rc;
 
 	if (!printed_version++)
 		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
@@ -4208,6 +4283,7 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 		return -ENOMEM;
 	host->private_data = hpriv;
 	hpriv->n_ports = n_ports;
+	hpriv->board_idx = board_idx;
 
 	/* acquire resources */
 	rc = pcim_enable_device(pdev);
@@ -4230,8 +4306,17 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 	if (rc)
 		return rc;
 
+	for (port = 0; port < host->n_ports; port++) {
+		struct ata_port *ap = host->ports[port];
+		void __iomem *port_mmio = mv_port_base(hpriv->base, port);
+		unsigned int offset = port_mmio - hpriv->base;
+
+		ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio");
+		ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port");
+	}
+
 	/* initialize adapter */
-	rc = mv_init_host(host, board_idx);
+	rc = mv_init_host(host);
 	if (rc)
 		return rc;
 
@@ -4247,6 +4332,27 @@ static int mv_pci_init_one(struct pci_dev *pdev,
 	return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED,
 				 IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht);
 }
+
+#ifdef CONFIG_PM
+static int mv_pci_device_resume(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	int rc;
+
+	rc = ata_pci_device_do_resume(pdev);
+	if (rc)
+		return rc;
+
+	/* initialize adapter */
+	rc = mv_init_host(host);
+	if (rc)
+		return rc;
+
+	ata_host_resume(host);
+
+	return 0;
+}
+#endif
 #endif
 
 static int mv_platform_probe(struct platform_device *pdev);

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-10-06 22:26         ` Bartlomiej Zolnierkiewicz
@ 2009-10-06 23:02           ` Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-10-06 23:02 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: Jung-Ik (John) Lee, Andrew Morton, Linus Torvalds, linux-ide,
	LKML, Grant Grundler, Gwendal Gringo

On 10/06/2009 06:26 PM, Bartlomiej Zolnierkiewicz wrote:
> To the previous patch.  For your convenience I'll re-post all overdue
> pata_atp867x patches to the date on linux-ide ML..


Much appreciated...

	Jeff




^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-10-06  4:24       ` Jeff Garzik
@ 2009-10-06 22:26         ` Bartlomiej Zolnierkiewicz
  2009-10-06 23:02           ` Jeff Garzik
  0 siblings, 1 reply; 95+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-10-06 22:26 UTC (permalink / raw)
  To: Jeff Garzik
  Cc: Jung-Ik (John) Lee, Andrew Morton, Linus Torvalds, linux-ide,
	LKML, Grant Grundler, Gwendal Gringo

On Tuesday 06 October 2009 06:24:05 Jeff Garzik wrote:
> On 09/28/2009 11:34 AM, Bartlomiej Zolnierkiewicz wrote:
> > Thanks, your patch looks good to me but since there are still some
> > leftover issues left we would also need something like the incremental
> > patch below:
> >
> > From: Bartlomiej Zolnierkiewicz<bzolnier@gmail.com>
> > Subject: [PATCH] pata_atp867x: PIO support fixes
> >
> > * use  8 clk setting for active clocks == 7 (was 12 clk)
> > * use 12 clk setting for active clocks>  12 (was  8 clk)
> > * do 66MHz bus fixup before mapping active clocks
> > * fix setup of PIO command timings
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz<bzolnier@gmail.com>
> > ---
> >   drivers/ata/pata_atp867x.c |   36 +++++++++++++++++++-----------------
> >   1 file changed, 19 insertions(+), 17 deletions(-)
> >
> > Index: b/drivers/ata/pata_atp867x.c
> > ===================================================================
> > --- a/drivers/ata/pata_atp867x.c
> > +++ b/drivers/ata/pata_atp867x.c
> > @@ -155,30 +155,31 @@ static int atp867x_get_active_clocks_shi
> >   	struct atp867x_priv *dp = ap->private_data;
> >   	unsigned char clocks = clk;
> >
> > +	/*
> > +	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> > +	 * on 66MHz bus
> > +	 */
> > +	if (dp->pci66mhz)
> > +		clocks++;
> > +
> >   	switch (clocks) {
> >   	case 0:
> >   		clocks = 1;
> >   		break;
> > -	case 1 ... 7:
> > -		break;
> > -	case 9 ... 12:
> > -		clocks = 7;
> > +	case 1 ... 6:
> >   		break;
> >   	default:
> >   		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> > -			"Using default 8clk.\n", clk);
> > +			"Using 12clk.\n", clk);
> > +	case 9 ... 12:
> > +		clocks = 7;	/* 12 clk */
> > +		break;
> > +	case 7:
> >   	case 8:	/* default 8 clk */
> >   		clocks = 0;
> >   		goto active_clock_shift_done;
> >   	}
> >
> > -	/*
> > -	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> > -	 * on 66MHz bus
> > -	 */
> > -	if (dp->pci66mhz&&  clocks<  7)
> > -		clocks++;
> > -
> >   active_clock_shift_done:
> >   	return clocks<<  ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
> >   }
> > @@ -193,7 +194,8 @@ static int atp867x_get_recover_clocks_sh
> >   		break;
> >   	case 1 ... 11:
> >   		break;
> > -	case 13: case 14:
> > +	case 13:
> > +	case 14:
> >   		--clocks;	/* by the spec */
> >   		break;
> >   	case 15:
> > @@ -235,16 +237,16 @@ static void atp867x_set_piomode(struct a
> >   	iowrite8(b, dp->dma_mode);
> >
> >   	b = atp867x_get_active_clocks_shifted(ap, t.active) |
> > -		atp867x_get_recover_clocks_shifted(t.recover);
> > +	    atp867x_get_recover_clocks_shifted(t.recover);
> >
> >   	if (adev->devno&  1)
> >   		iowrite8(b, dp->slave_piospd);
> >   	else
> >   		iowrite8(b, dp->mstr_piospd);
> >
> > -	/*
> > -	 * use the same value for comand timing as for PIO timimg
> > -	 */
> > +	b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
> > +	    atp867x_get_recover_clocks_shifted(t.rec8b);
> > +
> >   	iowrite8(b, dp->eightb_piospd);
> >   }
> >
> >
> 
> This was incremental to the previous patch, or upstream?

To the previous patch.  For your convenience I'll re-post all overdue
pata_atp867x patches to the date on linux-ide ML..

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-28 15:34     ` Bartlomiej Zolnierkiewicz
  2009-09-28 20:20       ` Jung-Ik (John) Lee
  2009-09-28 20:49       ` Jung-Ik (John) Lee
@ 2009-10-06  4:24       ` Jeff Garzik
  2009-10-06 22:26         ` Bartlomiej Zolnierkiewicz
  2 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2009-10-06  4:24 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: Jung-Ik (John) Lee, Andrew Morton, Linus Torvalds, linux-ide,
	LKML, Grant Grundler, Gwendal Gringo

On 09/28/2009 11:34 AM, Bartlomiej Zolnierkiewicz wrote:
> Thanks, your patch looks good to me but since there are still some
> leftover issues left we would also need something like the incremental
> patch below:
>
> From: Bartlomiej Zolnierkiewicz<bzolnier@gmail.com>
> Subject: [PATCH] pata_atp867x: PIO support fixes
>
> * use  8 clk setting for active clocks == 7 (was 12 clk)
> * use 12 clk setting for active clocks>  12 (was  8 clk)
> * do 66MHz bus fixup before mapping active clocks
> * fix setup of PIO command timings
>
> Signed-off-by: Bartlomiej Zolnierkiewicz<bzolnier@gmail.com>
> ---
>   drivers/ata/pata_atp867x.c |   36 +++++++++++++++++++-----------------
>   1 file changed, 19 insertions(+), 17 deletions(-)
>
> Index: b/drivers/ata/pata_atp867x.c
> ===================================================================
> --- a/drivers/ata/pata_atp867x.c
> +++ b/drivers/ata/pata_atp867x.c
> @@ -155,30 +155,31 @@ static int atp867x_get_active_clocks_shi
>   	struct atp867x_priv *dp = ap->private_data;
>   	unsigned char clocks = clk;
>
> +	/*
> +	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> +	 * on 66MHz bus
> +	 */
> +	if (dp->pci66mhz)
> +		clocks++;
> +
>   	switch (clocks) {
>   	case 0:
>   		clocks = 1;
>   		break;
> -	case 1 ... 7:
> -		break;
> -	case 9 ... 12:
> -		clocks = 7;
> +	case 1 ... 6:
>   		break;
>   	default:
>   		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> -			"Using default 8clk.\n", clk);
> +			"Using 12clk.\n", clk);
> +	case 9 ... 12:
> +		clocks = 7;	/* 12 clk */
> +		break;
> +	case 7:
>   	case 8:	/* default 8 clk */
>   		clocks = 0;
>   		goto active_clock_shift_done;
>   	}
>
> -	/*
> -	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> -	 * on 66MHz bus
> -	 */
> -	if (dp->pci66mhz&&  clocks<  7)
> -		clocks++;
> -
>   active_clock_shift_done:
>   	return clocks<<  ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>   }
> @@ -193,7 +194,8 @@ static int atp867x_get_recover_clocks_sh
>   		break;
>   	case 1 ... 11:
>   		break;
> -	case 13: case 14:
> +	case 13:
> +	case 14:
>   		--clocks;	/* by the spec */
>   		break;
>   	case 15:
> @@ -235,16 +237,16 @@ static void atp867x_set_piomode(struct a
>   	iowrite8(b, dp->dma_mode);
>
>   	b = atp867x_get_active_clocks_shifted(ap, t.active) |
> -		atp867x_get_recover_clocks_shifted(t.recover);
> +	    atp867x_get_recover_clocks_shifted(t.recover);
>
>   	if (adev->devno&  1)
>   		iowrite8(b, dp->slave_piospd);
>   	else
>   		iowrite8(b, dp->mstr_piospd);
>
> -	/*
> -	 * use the same value for comand timing as for PIO timimg
> -	 */
> +	b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
> +	    atp867x_get_recover_clocks_shifted(t.rec8b);
> +
>   	iowrite8(b, dp->eightb_piospd);
>   }
>
>

This was incremental to the previous patch, or upstream?

	Jeff



^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-28 15:34     ` Bartlomiej Zolnierkiewicz
  2009-09-28 20:20       ` Jung-Ik (John) Lee
@ 2009-09-28 20:49       ` Jung-Ik (John) Lee
  2009-10-06  4:24       ` Jeff Garzik
  2 siblings, 0 replies; 95+ messages in thread
From: Jung-Ik (John) Lee @ 2009-09-28 20:49 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: Jeff Garzik, Andrew Morton, Linus Torvalds, linux-ide, LKML,
	Grant Grundler, Gwendal Gringo

On Mon, Sep 28, 2009 at 8:34 AM, Bartlomiej Zolnierkiewicz
<bzolnier@gmail.com> wrote:
> On Tuesday 22 September 2009 04:36:13 Jung-Ik (John) Lee wrote:
>> On Sun, Sep 20, 2009 at 2:05 PM, Bartlomiej Zolnierkiewicz
>> <bzolnier@gmail.com> wrote:
>> > On Thursday 17 September 2009 22:49:35 Jeff Garzik wrote:
>> >>
>> >> Bug fixes, and a new driver.
>> >>
>> >>
>> >>
>> >> Please pull from 'upstream-linus' branch of
>> >> master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
>> >>
>> >> to receive the following updates:
>> >>
>> >>  drivers/ata/Kconfig        |    9 +
>> >>  drivers/ata/Makefile       |    1 +
>> >>  drivers/ata/ahci.c         |    4 +-
>> >>  drivers/ata/libata-core.c  |    4 +-
>> >>  drivers/ata/pata_amd.c     |    3 +
>> >>  drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
>> >>  drivers/ata/sata_promise.c |  155 +++++++++++--
>> >>  include/linux/pci_ids.h    |    2 +
>> >>  8 files changed, 704 insertions(+), 22 deletions(-)
>> >>  create mode 100644 drivers/ata/pata_atp867x.c
>> >>
>> >> John(Jung-Ik) Lee (1):
>> >>       libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers
>> >
>> > That was really fast..  Not necessarily a bad thing but this driver would
>> > benefit from few polishing touches..
>> >
>> >> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
>> >> new file mode 100644
>> >> index 0000000..7990de9
>> >> --- /dev/null
>> >> +++ b/drivers/ata/pata_atp867x.c
>> >> @@ -0,0 +1,548 @@
>> >> +/*
>> >> + * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
>> >> + *
>> >> + *   (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
>> >> + *
>> >> + * Per Atp867 data sheet rev 1.2, Acard.
>> >> + * Based in part on early ide code from
>> >> + *   2003-2004 by Eric Uhrhane, Google, Inc.
>> >> + *
>> >> + * This program is free software; you can redistribute it and/or modify
>> >> + * it under the terms of the GNU General Public License as published by
>> >> + * the Free Software Foundation; either version 2 of the License, or
>> >> + * (at your option) any later version.
>> >> + *
>> >> + * This program is distributed in the hope that it will be useful,
>> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> >> + * GNU General Public License for more details.
>> >> + *
>> >> + * You should have received a copy of the GNU General Public License
>> >> + * along with this program; if not, write to the Free Software
>> >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> >> + *
>> >> + *
>> >> + * TODO:
>> >> + *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
>> >> + */
>> >> +
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/pci.h>
>> >> +#include <linux/init.h>
>> >> +#include <linux/blkdev.h>
>> >> +#include <linux/delay.h>
>> >> +#include <linux/device.h>
>> >> +#include <scsi/scsi_host.h>
>> >> +#include <linux/libata.h>
>> >> +
>> >> +#define      DRV_NAME        "pata_atp867x"
>> >> +#define      DRV_VERSION     "0.7.5"
>> >> +
>> >> +/*
>> >> + * IO Registers
>> >> + * Note that all runtime hot priv ports are cached in ap private_data
>> >> + */
>> >> +
>> >> +enum {
>> >> +     ATP867X_IO_CHANNEL_OFFSET       = 0x10,
>> >> +
>> >> +     /*
>> >> +      * IO Register Bitfields
>> >> +      */
>> >> +
>> >> +     ATP867X_IO_PIOSPD_ACTIVE_SHIFT  = 4,
>> >> +     ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
>> >> +
>> >> +     ATP867X_IO_DMAMODE_MSTR_SHIFT   = 0,
>> >> +     ATP867X_IO_DMAMODE_MSTR_MASK    = 0x07,
>> >> +     ATP867X_IO_DMAMODE_SLAVE_SHIFT  = 4,
>> >> +     ATP867X_IO_DMAMODE_SLAVE_MASK   = 0x70,
>> >> +
>> >> +     ATP867X_IO_DMAMODE_UDMA_6       = 0x07,
>> >> +     ATP867X_IO_DMAMODE_UDMA_5       = 0x06,
>> >> +     ATP867X_IO_DMAMODE_UDMA_4       = 0x05,
>> >> +     ATP867X_IO_DMAMODE_UDMA_3       = 0x04,
>> >> +     ATP867X_IO_DMAMODE_UDMA_2       = 0x03,
>> >> +     ATP867X_IO_DMAMODE_UDMA_1       = 0x02,
>> >> +     ATP867X_IO_DMAMODE_UDMA_0       = 0x01,
>> >> +     ATP867X_IO_DMAMODE_DISABLE      = 0x00,
>> >> +
>> >> +     ATP867X_IO_SYS_INFO_66MHZ       = 0x04,
>> >> +     ATP867X_IO_SYS_INFO_SLOW_UDMA5  = 0x02,
>> >> +     ATP867X_IO_SYS_MASK_RESERVED    = (~0xf1),
>> >> +
>> >> +     ATP867X_IO_PORTSPD_VAL          = 0x1143,
>> >> +     ATP867X_PREREAD_VAL             = 0x0200,
>> >> +
>> >> +     ATP867X_NUM_PORTS               = 4,
>> >> +     ATP867X_BAR_IOBASE              = 0,
>> >> +     ATP867X_BAR_ROMBASE             = 6,
>> >> +};
>> >> +
>> >> +#define ATP867X_IOBASE(ap)           ((ap)->host->iomap[0])
>> >> +#define ATP867X_SYS_INFO(ap)         (0x3F + ATP867X_IOBASE(ap))
>> >> +
>> >> +#define ATP867X_IO_PORTBASE(ap, port)        (0x00 + ATP867X_IOBASE(ap) + \
>> >> +                                     (port) * ATP867X_IO_CHANNEL_OFFSET)
>> >> +#define ATP867X_IO_DMABASE(ap, port) (0x40 + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +
>> >> +#define ATP867X_IO_STATUS(ap, port)  (0x07 + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +#define ATP867X_IO_ALTSTATUS(ap, port)       (0x0E + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +
>> >> +/*
>> >> + * hot priv ports
>> >> + */
>> >> +#define ATP867X_IO_MSTRPIOSPD(ap, port)      (0x08 + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +#define ATP867X_IO_SLAVPIOSPD(ap, port)      (0x09 + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +#define ATP867X_IO_8BPIOSPD(ap, port)        (0x0A + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +#define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +
>> >> +#define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +#define ATP867X_IO_PREREAD(ap, port) (0x4C + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +
>> >> +struct atp867x_priv {
>> >> +     void __iomem *dma_mode;
>> >> +     void __iomem *mstr_piospd;
>> >> +     void __iomem *slave_piospd;
>> >> +     void __iomem *eightb_piospd;
>> >> +     int             pci66mhz;
>> >> +};
>> >> +
>> >> +static inline u8 atp867x_speed_to_mode(u8 speed)
>> >> +{
>> >> +     return speed - XFER_UDMA_0 + 1;
>> >> +}
>> >> +
>> >> +static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
>> >> +{
>> >> +     struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
>> >> +     struct atp867x_priv *dp = ap->private_data;
>> >> +     u8 speed = adev->dma_mode;
>> >> +     u8 b;
>> >> +     u8 mode;
>> >> +
>> >> +     mode = atp867x_speed_to_mode(speed);
>> >
>> > The driver currently doesn't support MWDMA modes but claims otherwise
>> > (fixed in the attached patch).
>> >
>> >> +     /*
>> >> +      * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
>> >> +      * on 66MHz bus
>> >> +      *   rev-A: UDMA_1~4 (5, 6 no change)
>> >> +      *   rev-B: all UDMA modes
>> >> +      *   UDMA_0 stays not to disable UDMA
>> >> +      */
>> >> +     if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
>> >> +        (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
>> >> +         mode < ATP867X_IO_DMAMODE_UDMA_5))
>> >> +             mode--;
>> >> +
>> >> +     b = ioread8(dp->dma_mode);
>> >> +     if (adev->devno & 1) {
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
>> >> +                     (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
>> >> +     } else {
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
>> >> +                     (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
>> >> +     }
>> >> +     iowrite8(b, dp->dma_mode);
>> >> +}
>> >> +
>> >> +static int atp867x_get_active_clocks_shifted(unsigned int clk)
>> >> +{
>> >> +     unsigned char clocks = clk;
>> >> +
>> >> +     switch (clocks) {
>> >> +     case 0:
>> >> +             clocks = 1;
>> >> +             break;
>> >> +     case 1 ... 7:
>> >> +             break;
>> >> +     case 8 ... 12:
>> >> +             clocks = 7;
>> >
>> > Shouldn't "clocks = 0" (the default case) be used here?
>>
>> The clocks value 0 sets it to 8 clocks, while value 7 sets to 12 clocks.
>
> This would explain it but then there is no need to use "clocks = 7"
> for the _input_ "clocks == 7".
>
>> I cleaned up a bit on clocks_shift. See the patch below.
>>
>> > Otherwise it seems to result in underclocked timings for dp->pci66mhz == 0.
>> >
>> >> +             break;
>> >> +     default:
>> >> +             printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
>> >> +                     "Using default 8clk.\n", clk);
>> >> +             clocks = 0;     /* 8 clk */
>> >> +             break;
>> >> +     }
>> >> +     return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>> >> +}
>> >> +
>> >> +static int atp867x_get_recover_clocks_shifted(unsigned int clk)
>> >> +{
>> >> +     unsigned char clocks = clk;
>> >> +
>> >> +     switch (clocks) {
>> >> +     case 0:
>> >> +             clocks = 1;
>> >> +             break;
>> >> +     case 1 ... 11:
>> >> +             break;
>> >> +     case 12:
>> >> +             clocks = 0;
>> >> +             break;
>> >> +     case 13: case 14:
>> >> +             --clocks;
>> >> +             break;
>> >
>> > Is "clocks == 14" a reserved setting?
>>
>> 12 is reserved for the default (== 0), and 13, 14 are set to value 12,
>> 13 respectively.
>
> I meant the _output_ "clocks == 14" here.
>
>> >
>> > If so a comment documenting it would be appreciated.
>>
>> Sure. see the new patch below.
>>
>> >
>> >> +     case 15:
>> >> +             break;
>> >> +     default:
>> >> +             printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
>> >> +                     "Using default 15clk.\n", clk);
>> >> +             clocks = 0;     /* 12 clk */
>> >
>> > Shouldn't it use "clocks == 15" setting?
>> It was a typo. 12 is the right default.
>>
>> >
>> >> +             break;
>> >> +     }
>> >> +     return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
>> >> +}
>> >> +
>> >> +static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
>> >> +{
>> >> +     struct ata_device *peer = ata_dev_pair(adev);
>> >> +     struct atp867x_priv *dp = ap->private_data;
>> >> +     u8 speed = adev->pio_mode;
>> >> +     struct ata_timing t, p;
>> >> +     int T, UT;
>> >> +     u8 b;
>> >> +
>> >> +     T = 1000000000 / 33333;
>> >> +     UT = T / 4;
>> >> +
>> >> +     ata_timing_compute(adev, speed, &t, T, UT);
>> >> +     if (peer && peer->pio_mode) {
>> >> +             ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
>> >> +             ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
>> >> +     }
>> >> +
>> >> +     b = ioread8(dp->dma_mode);
>> >> +     if (adev->devno & 1)
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
>> >> +     else
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
>> >> +     iowrite8(b, dp->dma_mode);
>> >> +
>> >> +     b = atp867x_get_active_clocks_shifted(t.active) |
>> >> +             atp867x_get_recover_clocks_shifted(t.recover);
>> >> +     if (dp->pci66mhz)
>> >> +             b += 0x10;
>> >
>> > What is the purpose of the above hack?
>>
>> For safe PIO mode according to spec.
>>
>> >
>> > AFAICS (I don't have a datasheet) it may result in invalid active
>> > clocks being used for t.active > 12 and 0x80 bit being set incorrectly
>> > for t.active values 7..12 (unless it was the purpose of the hack).
>>
>> See the patch below..
>>
>> >
>> >> +     if (adev->devno & 1)
>> >> +             iowrite8(b, dp->slave_piospd);
>> >> +     else
>> >> +             iowrite8(b, dp->mstr_piospd);
>> >> +
>> >> +     /*
>> >> +      * use the same value for comand timing as for PIO timimg
>> >> +      */
>> >> +     iowrite8(b, dp->eightb_piospd);
>> >
>> > This is incorrect if slave/master devices use different PIO modes
>> > or if PIO mode <= 2 is used by any device.
>> >
>> > Timing based on t.act8b and t.rec8b values should be used instead.
>>
>> act8b and rec8b have the same values as active, recovery of the port.
>
> Please take a look at drivers/ata/libata-core.c::ata_timing[] table:
>
> ...
>        { XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
>        { XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
>        { XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
>        { XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
>        { XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
>        { XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
>        { XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
> ...
>
> For PIO modes <= 2 (or if master/slave devices use different PIO modes)
> we'll have different values, i.e. for PIO2 in case of a single device on
> the port using standard timings we'll have:
>
> t.active   =  4
> t.recovery =  4
> t.act8b    = 10
> t.rec8b    =  2
>
> Most likely we won't see much use of this driver with older devices,
> however this should not stop us from supporting them and at the same
> time making the driver easier to maintain.
>
>> If a:r=3:1 then they become 4:1 on 66mhz for safer transfer, and
>> a8:r8=3:1, which is identical but the a8 should be incremented by 1.
>> I can use a8:r8 with 66mhz fixup but it becomes the same as using a:r.
>> Take a look at the patch below.
>>
>> >
>> > On the somehow related note:
>> >
>> > * I don't see how PIO0-2 command timings can be met with only 3 bits
>> >  used for active clocks.  Could it be that dp->eight_piospd should be
>> >  programmed in a slightly different way than dp->{mstr,slave}_piospd?
>> >
>>
>> See new patch on clocks_shift below.
>>
>> > * The controller allows higher clocks values for recovery timings but
>> >  ata_timing_compute() tries to fairly increase both recovery and active
>> >  timings to meet the required cycle timing.
>> >
>> >> +}
>> >> +
>> >> +static int atp867x_cable_detect(struct ata_port *ap)
>> >> +{
>> >> +     return ATA_CBL_PATA40_SHORT;
>> >> +}
>> >
>> > As noticed by Robert and Alan already:
>> >
>> > This should use ATA_CBL_PATA_UNK and rely on the driver-side cable detection.
>>
>> I modified cable_detect() to use override; on a certain
>> subsystem_vendor|device, its 40short, others, unknown.
>>
>> >
>> >
>> > One last thing: Power Management support is missing from this driver
>> > (I tried addressing this in the separately posted patch but it needs
>> > testing by somebody with the hardware).
>> >
>> >
>> > MWDMA fix:
>> >
>> > From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>> > Subject: [PATCH] pata_atp867x: fix it to not claim MWDMA support
>> >
>> > MWDMA modes are not supported by this driver currently.
>> >
>> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>> > ---
>> >  drivers/ata/pata_atp867x.c |   10 +---------
>> >  1 file changed, 1 insertion(+), 9 deletions(-)
>> >
>> > Index: b/drivers/ata/pata_atp867x.c
>> > ===================================================================
>> > --- a/drivers/ata/pata_atp867x.c
>> > +++ b/drivers/ata/pata_atp867x.c
>> > @@ -118,20 +118,13 @@ struct atp867x_priv {
>> >        int             pci66mhz;
>> >  };
>> >
>> > -static inline u8 atp867x_speed_to_mode(u8 speed)
>> > -{
>> > -       return speed - XFER_UDMA_0 + 1;
>> > -}
>> > -
>> >  static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
>> >  {
>> >        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
>> >        struct atp867x_priv *dp = ap->private_data;
>> >        u8 speed = adev->dma_mode;
>> >        u8 b;
>> > -       u8 mode;
>> > -
>> > -       mode = atp867x_speed_to_mode(speed);
>> > +       u8 mode = speed - XFER_UDMA_0 + 1;
>> >
>> >        /*
>> >         * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
>> > @@ -471,7 +464,6 @@ static int atp867x_init_one(struct pci_d
>> >        static const struct ata_port_info info_867x = {
>> >                .flags          = ATA_FLAG_SLAVE_POSS,
>> >                .pio_mask       = ATA_PIO4,
>> > -               .mwdma_mask     = ATA_MWDMA2,
>>
>> This looks good to me. thx.
>>
>> >                .udma_mask      = ATA_UDMA6,
>> >                .port_ops       = &atp867x_ops,
>> >        };
>> >
>>
>>
>> From: John(Jung-Ik) Lee <jilee@google.com>
>>
>> clarifications in timings calculations and cable detection
>>
>> Signed-off-by: John(Jung-Ik) Lee <jilee@google.com>
>> ---
>>
>>  pata_atp867x.c |   50 +++++++++++++++++++++++++++++++++++++-------------
>>  1 files changed, 37 insertions, 13 deletions
>>
>> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
>> index e6c4706..c1c691f 100644
>> --- a/drivers/ata/pata_atp867x.c
>> +++ b/drivers/ata/pata_atp867x.c
>> @@ -156,8 +156,10 @@ static void atp867x_set_dmamode(struct ata_port
>> *ap, struct ata_device *adev)
>>       iowrite8(b, dp->dma_mode);
>>  }
>>
>> -static int atp867x_get_active_clocks_shifted(unsigned int clk)
>> +static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
>> +     unsigned int clk)
>>  {
>> +     struct atp867x_priv *dp = ap->private_data;
>>       unsigned char clocks = clk;
>>
>>       switch (clocks) {
>> @@ -166,15 +168,25 @@ static int
>> atp867x_get_active_clocks_shifted(unsigned int clk)
>>               break;
>>       case 1 ... 7:
>>               break;
>> -     case 8 ... 12:
>> +     case 9 ... 12:
>>               clocks = 7;
>>               break;
>>       default:
>>               printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
>>                       "Using default 8clk.\n", clk);
>> -             clocks = 0;     /* 8 clk */
>> -             break;
>> +     case 8: /* default 8 clk */
>> +             clocks = 0;
>> +             goto active_clock_shift_done;
>>       }
>> +
>> +     /*
>> +      * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
>> +      * on 66MHz bus
>> +      */
>> +     if (dp->pci66mhz && clocks < 7)
>> +             clocks++;
>> +
>> +active_clock_shift_done:
>>       return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>>  }
>>
>> @@ -188,20 +200,19 @@ static int
>> atp867x_get_recover_clocks_shifted(unsigned int clk)
>>               break;
>>       case 1 ... 11:
>>               break;
>> -     case 12:
>> -             clocks = 0;
>> -             break;
>>       case 13: case 14:
>> -             --clocks;
>> +             --clocks;       /* by the spec */
>>               break;
>>       case 15:
>>               break;
>>       default:
>>               printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
>>                       "Using default 12clk.\n", clk);
>> -             clocks = 0;     /* 12 clk */
>> +     case 12:        /* default 12 clk */
>> +             clocks = 0;
>>               break;
>>       }
>> +
>>       return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
>>  }
>>
>> @@ -230,10 +241,8 @@ static void atp867x_set_piomode(struct ata_port
>> *ap, struct ata_device *adev)
>>               b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
>>       iowrite8(b, dp->dma_mode);
>>
>> -     b = atp867x_get_active_clocks_shifted(t.active) |
>> +     b = atp867x_get_active_clocks_shifted(ap, t.active) |
>>               atp867x_get_recover_clocks_shifted(t.recover);
>> -     if (dp->pci66mhz)
>> -             b += 0x10;
>>
>>       if (adev->devno & 1)
>>               iowrite8(b, dp->slave_piospd);
>> @@ -246,9 +255,24 @@ static void atp867x_set_piomode(struct ata_port
>> *ap, struct ata_device *adev)
>>       iowrite8(b, dp->eightb_piospd);
>>  }
>>
>> +static int atp867x_cable_override(struct pci_dev *pdev)
>> +{
>> +     if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
>> +             (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
>> +              pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
>> +             return 1;
>> +     }
>> +     return 0;
>> +}
>> +
>>  static int atp867x_cable_detect(struct ata_port *ap)
>>  {
>> -     return ATA_CBL_PATA40_SHORT;
>> +     struct pci_dev *pdev = to_pci_dev(ap->host->dev);
>> +
>> +     if (atp867x_cable_override(pdev))
>> +             return ATA_CBL_PATA40_SHORT;
>> +
>> +     return ATA_CBL_PATA_UNK;
>>  }
>>
>>  static struct scsi_host_template atp867x_sht = {
>
> Thanks, your patch looks good to me but since there are still some
> leftover issues left we would also need something like the incremental
> patch below:
>
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] pata_atp867x: PIO support fixes
>
> * use  8 clk setting for active clocks == 7 (was 12 clk)
> * use 12 clk setting for active clocks > 12 (was  8 clk)
> * do 66MHz bus fixup before mapping active clocks
> * fix setup of PIO command timings
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
>  drivers/ata/pata_atp867x.c |   36 +++++++++++++++++++-----------------
>  1 file changed, 19 insertions(+), 17 deletions(-)
>
> Index: b/drivers/ata/pata_atp867x.c
> ===================================================================
> --- a/drivers/ata/pata_atp867x.c
> +++ b/drivers/ata/pata_atp867x.c
> @@ -155,30 +155,31 @@ static int atp867x_get_active_clocks_shi
>        struct atp867x_priv *dp = ap->private_data;
>        unsigned char clocks = clk;
>
> +       /*
> +        * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> +        * on 66MHz bus
> +        */
> +       if (dp->pci66mhz)
> +               clocks++;
> +
>        switch (clocks) {
>        case 0:
>                clocks = 1;
>                break;
> -       case 1 ... 7:
> -               break;
> -       case 9 ... 12:
> -               clocks = 7;
> +       case 1 ... 6:
>                break;
>        default:
>                printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> -                       "Using default 8clk.\n", clk);
> +                       "Using 12clk.\n", clk);
> +       case 9 ... 12:
> +               clocks = 7;     /* 12 clk */
> +               break;
> +       case 7:
>        case 8: /* default 8 clk */
>                clocks = 0;
>                goto active_clock_shift_done;
>        }
>
> -       /*
> -        * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> -        * on 66MHz bus
> -        */
> -       if (dp->pci66mhz && clocks < 7)
> -               clocks++;
> -
>  active_clock_shift_done:
>        return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>  }
> @@ -193,7 +194,8 @@ static int atp867x_get_recover_clocks_sh
>                break;
>        case 1 ... 11:
>                break;
> -       case 13: case 14:
> +       case 13:
> +       case 14:
>                --clocks;       /* by the spec */
>                break;
>        case 15:
> @@ -235,16 +237,16 @@ static void atp867x_set_piomode(struct a
>        iowrite8(b, dp->dma_mode);
>
>        b = atp867x_get_active_clocks_shifted(ap, t.active) |
> -               atp867x_get_recover_clocks_shifted(t.recover);
> +           atp867x_get_recover_clocks_shifted(t.recover);
>
>        if (adev->devno & 1)
>                iowrite8(b, dp->slave_piospd);
>        else
>                iowrite8(b, dp->mstr_piospd);
>
> -       /*
> -        * use the same value for comand timing as for PIO timimg
> -        */
> +       b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
> +           atp867x_get_recover_clocks_shifted(t.rec8b);
> +
>        iowrite8(b, dp->eightb_piospd);
>  }
>
>

Looks good. Thanks Bart.

Acked-by: Jung-Ik (John) Lee <jilee@google.com>

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-28 20:20       ` Jung-Ik (John) Lee
@ 2009-09-28 20:36         ` Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-09-28 20:36 UTC (permalink / raw)
  To: Jung-Ik (John) Lee
  Cc: Bartlomiej Zolnierkiewicz, Andrew Morton, Linus Torvalds,
	linux-ide, LKML, Grant Grundler, Gwendal Gringo

On 09/28/2009 04:20 PM, Jung-Ik (John) Lee wrote:
>> Thanks, your patch looks good to me but since there are still some
>> leftover issues left we would also need something like the incremental
>> patch below:
>
> [resending - bounced back from -ide, -kernel]
>
> your patch below looks good to me.


By convention, you should reply to a patch such as Bart's, and provide 
an explicit line of text that may be pasted into the patch at merge time:

Acked-by: Your Name <your@email.address>


^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-28 15:34     ` Bartlomiej Zolnierkiewicz
@ 2009-09-28 20:20       ` Jung-Ik (John) Lee
  2009-09-28 20:36         ` Jeff Garzik
  2009-09-28 20:49       ` Jung-Ik (John) Lee
  2009-10-06  4:24       ` Jeff Garzik
  2 siblings, 1 reply; 95+ messages in thread
From: Jung-Ik (John) Lee @ 2009-09-28 20:20 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: Jeff Garzik, Andrew Morton, Linus Torvalds, linux-ide, LKML,
	Grant Grundler, Gwendal Gringo

On Mon, Sep 28, 2009 at 8:34 AM, Bartlomiej Zolnierkiewicz
<bzolnier@gmail.com> wrote:
> On Tuesday 22 September 2009 04:36:13 Jung-Ik (John) Lee wrote:
>> On Sun, Sep 20, 2009 at 2:05 PM, Bartlomiej Zolnierkiewicz
>> <bzolnier@gmail.com> wrote:
>> > On Thursday 17 September 2009 22:49:35 Jeff Garzik wrote:
>> >>
>> >> Bug fixes, and a new driver.
>> >>
>> >>
>> >>
>> >> Please pull from 'upstream-linus' branch of
>> >> master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
>> >>
>> >> to receive the following updates:
>> >>
>> >>  drivers/ata/Kconfig        |    9 +
>> >>  drivers/ata/Makefile       |    1 +
>> >>  drivers/ata/ahci.c         |    4 +-
>> >>  drivers/ata/libata-core.c  |    4 +-
>> >>  drivers/ata/pata_amd.c     |    3 +
>> >>  drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
>> >>  drivers/ata/sata_promise.c |  155 +++++++++++--
>> >>  include/linux/pci_ids.h    |    2 +
>> >>  8 files changed, 704 insertions(+), 22 deletions(-)
>> >>  create mode 100644 drivers/ata/pata_atp867x.c
>> >>
>> >> John(Jung-Ik) Lee (1):
>> >>       libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers
>> >
>> > That was really fast..  Not necessarily a bad thing but this driver would
>> > benefit from few polishing touches..
>> >
>> >> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
>> >> new file mode 100644
>> >> index 0000000..7990de9
>> >> --- /dev/null
>> >> +++ b/drivers/ata/pata_atp867x.c
>> >> @@ -0,0 +1,548 @@
>> >> +/*
>> >> + * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
>> >> + *
>> >> + *   (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
>> >> + *
>> >> + * Per Atp867 data sheet rev 1.2, Acard.
>> >> + * Based in part on early ide code from
>> >> + *   2003-2004 by Eric Uhrhane, Google, Inc.
>> >> + *
>> >> + * This program is free software; you can redistribute it and/or modify
>> >> + * it under the terms of the GNU General Public License as published by
>> >> + * the Free Software Foundation; either version 2 of the License, or
>> >> + * (at your option) any later version.
>> >> + *
>> >> + * This program is distributed in the hope that it will be useful,
>> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> >> + * GNU General Public License for more details.
>> >> + *
>> >> + * You should have received a copy of the GNU General Public License
>> >> + * along with this program; if not, write to the Free Software
>> >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> >> + *
>> >> + *
>> >> + * TODO:
>> >> + *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
>> >> + */
>> >> +
>> >> +#include <linux/kernel.h>
>> >> +#include <linux/module.h>
>> >> +#include <linux/pci.h>
>> >> +#include <linux/init.h>
>> >> +#include <linux/blkdev.h>
>> >> +#include <linux/delay.h>
>> >> +#include <linux/device.h>
>> >> +#include <scsi/scsi_host.h>
>> >> +#include <linux/libata.h>
>> >> +
>> >> +#define      DRV_NAME        "pata_atp867x"
>> >> +#define      DRV_VERSION     "0.7.5"
>> >> +
>> >> +/*
>> >> + * IO Registers
>> >> + * Note that all runtime hot priv ports are cached in ap private_data
>> >> + */
>> >> +
>> >> +enum {
>> >> +     ATP867X_IO_CHANNEL_OFFSET       = 0x10,
>> >> +
>> >> +     /*
>> >> +      * IO Register Bitfields
>> >> +      */
>> >> +
>> >> +     ATP867X_IO_PIOSPD_ACTIVE_SHIFT  = 4,
>> >> +     ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
>> >> +
>> >> +     ATP867X_IO_DMAMODE_MSTR_SHIFT   = 0,
>> >> +     ATP867X_IO_DMAMODE_MSTR_MASK    = 0x07,
>> >> +     ATP867X_IO_DMAMODE_SLAVE_SHIFT  = 4,
>> >> +     ATP867X_IO_DMAMODE_SLAVE_MASK   = 0x70,
>> >> +
>> >> +     ATP867X_IO_DMAMODE_UDMA_6       = 0x07,
>> >> +     ATP867X_IO_DMAMODE_UDMA_5       = 0x06,
>> >> +     ATP867X_IO_DMAMODE_UDMA_4       = 0x05,
>> >> +     ATP867X_IO_DMAMODE_UDMA_3       = 0x04,
>> >> +     ATP867X_IO_DMAMODE_UDMA_2       = 0x03,
>> >> +     ATP867X_IO_DMAMODE_UDMA_1       = 0x02,
>> >> +     ATP867X_IO_DMAMODE_UDMA_0       = 0x01,
>> >> +     ATP867X_IO_DMAMODE_DISABLE      = 0x00,
>> >> +
>> >> +     ATP867X_IO_SYS_INFO_66MHZ       = 0x04,
>> >> +     ATP867X_IO_SYS_INFO_SLOW_UDMA5  = 0x02,
>> >> +     ATP867X_IO_SYS_MASK_RESERVED    = (~0xf1),
>> >> +
>> >> +     ATP867X_IO_PORTSPD_VAL          = 0x1143,
>> >> +     ATP867X_PREREAD_VAL             = 0x0200,
>> >> +
>> >> +     ATP867X_NUM_PORTS               = 4,
>> >> +     ATP867X_BAR_IOBASE              = 0,
>> >> +     ATP867X_BAR_ROMBASE             = 6,
>> >> +};
>> >> +
>> >> +#define ATP867X_IOBASE(ap)           ((ap)->host->iomap[0])
>> >> +#define ATP867X_SYS_INFO(ap)         (0x3F + ATP867X_IOBASE(ap))
>> >> +
>> >> +#define ATP867X_IO_PORTBASE(ap, port)        (0x00 + ATP867X_IOBASE(ap) + \
>> >> +                                     (port) * ATP867X_IO_CHANNEL_OFFSET)
>> >> +#define ATP867X_IO_DMABASE(ap, port) (0x40 + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +
>> >> +#define ATP867X_IO_STATUS(ap, port)  (0x07 + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +#define ATP867X_IO_ALTSTATUS(ap, port)       (0x0E + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +
>> >> +/*
>> >> + * hot priv ports
>> >> + */
>> >> +#define ATP867X_IO_MSTRPIOSPD(ap, port)      (0x08 + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +#define ATP867X_IO_SLAVPIOSPD(ap, port)      (0x09 + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +#define ATP867X_IO_8BPIOSPD(ap, port)        (0x0A + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +#define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
>> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> >> +
>> >> +#define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +#define ATP867X_IO_PREREAD(ap, port) (0x4C + \
>> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> >> +
>> >> +struct atp867x_priv {
>> >> +     void __iomem *dma_mode;
>> >> +     void __iomem *mstr_piospd;
>> >> +     void __iomem *slave_piospd;
>> >> +     void __iomem *eightb_piospd;
>> >> +     int             pci66mhz;
>> >> +};
>> >> +
>> >> +static inline u8 atp867x_speed_to_mode(u8 speed)
>> >> +{
>> >> +     return speed - XFER_UDMA_0 + 1;
>> >> +}
>> >> +
>> >> +static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
>> >> +{
>> >> +     struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
>> >> +     struct atp867x_priv *dp = ap->private_data;
>> >> +     u8 speed = adev->dma_mode;
>> >> +     u8 b;
>> >> +     u8 mode;
>> >> +
>> >> +     mode = atp867x_speed_to_mode(speed);
>> >
>> > The driver currently doesn't support MWDMA modes but claims otherwise
>> > (fixed in the attached patch).
>> >
>> >> +     /*
>> >> +      * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
>> >> +      * on 66MHz bus
>> >> +      *   rev-A: UDMA_1~4 (5, 6 no change)
>> >> +      *   rev-B: all UDMA modes
>> >> +      *   UDMA_0 stays not to disable UDMA
>> >> +      */
>> >> +     if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
>> >> +        (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
>> >> +         mode < ATP867X_IO_DMAMODE_UDMA_5))
>> >> +             mode--;
>> >> +
>> >> +     b = ioread8(dp->dma_mode);
>> >> +     if (adev->devno & 1) {
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
>> >> +                     (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
>> >> +     } else {
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
>> >> +                     (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
>> >> +     }
>> >> +     iowrite8(b, dp->dma_mode);
>> >> +}
>> >> +
>> >> +static int atp867x_get_active_clocks_shifted(unsigned int clk)
>> >> +{
>> >> +     unsigned char clocks = clk;
>> >> +
>> >> +     switch (clocks) {
>> >> +     case 0:
>> >> +             clocks = 1;
>> >> +             break;
>> >> +     case 1 ... 7:
>> >> +             break;
>> >> +     case 8 ... 12:
>> >> +             clocks = 7;
>> >
>> > Shouldn't "clocks = 0" (the default case) be used here?
>>
>> The clocks value 0 sets it to 8 clocks, while value 7 sets to 12 clocks.
>
> This would explain it but then there is no need to use "clocks = 7"
> for the _input_ "clocks == 7".
>
>> I cleaned up a bit on clocks_shift. See the patch below.
>>
>> > Otherwise it seems to result in underclocked timings for dp->pci66mhz == 0.
>> >
>> >> +             break;
>> >> +     default:
>> >> +             printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
>> >> +                     "Using default 8clk.\n", clk);
>> >> +             clocks = 0;     /* 8 clk */
>> >> +             break;
>> >> +     }
>> >> +     return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>> >> +}
>> >> +
>> >> +static int atp867x_get_recover_clocks_shifted(unsigned int clk)
>> >> +{
>> >> +     unsigned char clocks = clk;
>> >> +
>> >> +     switch (clocks) {
>> >> +     case 0:
>> >> +             clocks = 1;
>> >> +             break;
>> >> +     case 1 ... 11:
>> >> +             break;
>> >> +     case 12:
>> >> +             clocks = 0;
>> >> +             break;
>> >> +     case 13: case 14:
>> >> +             --clocks;
>> >> +             break;
>> >
>> > Is "clocks == 14" a reserved setting?
>>
>> 12 is reserved for the default (== 0), and 13, 14 are set to value 12,
>> 13 respectively.
>
> I meant the _output_ "clocks == 14" here.
>
>> >
>> > If so a comment documenting it would be appreciated.
>>
>> Sure. see the new patch below.
>>
>> >
>> >> +     case 15:
>> >> +             break;
>> >> +     default:
>> >> +             printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
>> >> +                     "Using default 15clk.\n", clk);
>> >> +             clocks = 0;     /* 12 clk */
>> >
>> > Shouldn't it use "clocks == 15" setting?
>> It was a typo. 12 is the right default.
>>
>> >
>> >> +             break;
>> >> +     }
>> >> +     return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
>> >> +}
>> >> +
>> >> +static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
>> >> +{
>> >> +     struct ata_device *peer = ata_dev_pair(adev);
>> >> +     struct atp867x_priv *dp = ap->private_data;
>> >> +     u8 speed = adev->pio_mode;
>> >> +     struct ata_timing t, p;
>> >> +     int T, UT;
>> >> +     u8 b;
>> >> +
>> >> +     T = 1000000000 / 33333;
>> >> +     UT = T / 4;
>> >> +
>> >> +     ata_timing_compute(adev, speed, &t, T, UT);
>> >> +     if (peer && peer->pio_mode) {
>> >> +             ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
>> >> +             ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
>> >> +     }
>> >> +
>> >> +     b = ioread8(dp->dma_mode);
>> >> +     if (adev->devno & 1)
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
>> >> +     else
>> >> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
>> >> +     iowrite8(b, dp->dma_mode);
>> >> +
>> >> +     b = atp867x_get_active_clocks_shifted(t.active) |
>> >> +             atp867x_get_recover_clocks_shifted(t.recover);
>> >> +     if (dp->pci66mhz)
>> >> +             b += 0x10;
>> >
>> > What is the purpose of the above hack?
>>
>> For safe PIO mode according to spec.
>>
>> >
>> > AFAICS (I don't have a datasheet) it may result in invalid active
>> > clocks being used for t.active > 12 and 0x80 bit being set incorrectly
>> > for t.active values 7..12 (unless it was the purpose of the hack).
>>
>> See the patch below..
>>
>> >
>> >> +     if (adev->devno & 1)
>> >> +             iowrite8(b, dp->slave_piospd);
>> >> +     else
>> >> +             iowrite8(b, dp->mstr_piospd);
>> >> +
>> >> +     /*
>> >> +      * use the same value for comand timing as for PIO timimg
>> >> +      */
>> >> +     iowrite8(b, dp->eightb_piospd);
>> >
>> > This is incorrect if slave/master devices use different PIO modes
>> > or if PIO mode <= 2 is used by any device.
>> >
>> > Timing based on t.act8b and t.rec8b values should be used instead.
>>
>> act8b and rec8b have the same values as active, recovery of the port.
>
> Please take a look at drivers/ata/libata-core.c::ata_timing[] table:
>
> ...
>        { XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
>        { XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
>        { XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
>        { XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
>        { XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
>        { XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
>        { XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
> ...
>
> For PIO modes <= 2 (or if master/slave devices use different PIO modes)
> we'll have different values, i.e. for PIO2 in case of a single device on
> the port using standard timings we'll have:
>
> t.active   =  4
> t.recovery =  4
> t.act8b    = 10
> t.rec8b    =  2
>
> Most likely we won't see much use of this driver with older devices,
> however this should not stop us from supporting them and at the same
> time making the driver easier to maintain.
>
>> If a:r=3:1 then they become 4:1 on 66mhz for safer transfer, and
>> a8:r8=3:1, which is identical but the a8 should be incremented by 1.
>> I can use a8:r8 with 66mhz fixup but it becomes the same as using a:r.
>> Take a look at the patch below.
>>
>> >
>> > On the somehow related note:
>> >
>> > * I don't see how PIO0-2 command timings can be met with only 3 bits
>> >  used for active clocks.  Could it be that dp->eight_piospd should be
>> >  programmed in a slightly different way than dp->{mstr,slave}_piospd?
>> >
>>
>> See new patch on clocks_shift below.
>>
>> > * The controller allows higher clocks values for recovery timings but
>> >  ata_timing_compute() tries to fairly increase both recovery and active
>> >  timings to meet the required cycle timing.
>> >
>> >> +}
>> >> +
>> >> +static int atp867x_cable_detect(struct ata_port *ap)
>> >> +{
>> >> +     return ATA_CBL_PATA40_SHORT;
>> >> +}
>> >
>> > As noticed by Robert and Alan already:
>> >
>> > This should use ATA_CBL_PATA_UNK and rely on the driver-side cable detection.
>>
>> I modified cable_detect() to use override; on a certain
>> subsystem_vendor|device, its 40short, others, unknown.
>>
>> >
>> >
>> > One last thing: Power Management support is missing from this driver
>> > (I tried addressing this in the separately posted patch but it needs
>> > testing by somebody with the hardware).
>> >
>> >
>> > MWDMA fix:
>> >
>> > From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>> > Subject: [PATCH] pata_atp867x: fix it to not claim MWDMA support
>> >
>> > MWDMA modes are not supported by this driver currently.
>> >
>> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
>> > ---
>> >  drivers/ata/pata_atp867x.c |   10 +---------
>> >  1 file changed, 1 insertion(+), 9 deletions(-)
>> >
>> > Index: b/drivers/ata/pata_atp867x.c
>> > ===================================================================
>> > --- a/drivers/ata/pata_atp867x.c
>> > +++ b/drivers/ata/pata_atp867x.c
>> > @@ -118,20 +118,13 @@ struct atp867x_priv {
>> >        int             pci66mhz;
>> >  };
>> >
>> > -static inline u8 atp867x_speed_to_mode(u8 speed)
>> > -{
>> > -       return speed - XFER_UDMA_0 + 1;
>> > -}
>> > -
>> >  static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
>> >  {
>> >        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
>> >        struct atp867x_priv *dp = ap->private_data;
>> >        u8 speed = adev->dma_mode;
>> >        u8 b;
>> > -       u8 mode;
>> > -
>> > -       mode = atp867x_speed_to_mode(speed);
>> > +       u8 mode = speed - XFER_UDMA_0 + 1;
>> >
>> >        /*
>> >         * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
>> > @@ -471,7 +464,6 @@ static int atp867x_init_one(struct pci_d
>> >        static const struct ata_port_info info_867x = {
>> >                .flags          = ATA_FLAG_SLAVE_POSS,
>> >                .pio_mask       = ATA_PIO4,
>> > -               .mwdma_mask     = ATA_MWDMA2,
>>
>> This looks good to me. thx.
>>
>> >                .udma_mask      = ATA_UDMA6,
>> >                .port_ops       = &atp867x_ops,
>> >        };
>> >
>>
>>
>> From: John(Jung-Ik) Lee <jilee@google.com>
>>
>> clarifications in timings calculations and cable detection
>>
>> Signed-off-by: John(Jung-Ik) Lee <jilee@google.com>
>> ---
>>
>>  pata_atp867x.c |   50 +++++++++++++++++++++++++++++++++++++-------------
>>  1 files changed, 37 insertions, 13 deletions
>>
>> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
>> index e6c4706..c1c691f 100644
>> --- a/drivers/ata/pata_atp867x.c
>> +++ b/drivers/ata/pata_atp867x.c
>> @@ -156,8 +156,10 @@ static void atp867x_set_dmamode(struct ata_port
>> *ap, struct ata_device *adev)
>>       iowrite8(b, dp->dma_mode);
>>  }
>>
>> -static int atp867x_get_active_clocks_shifted(unsigned int clk)
>> +static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
>> +     unsigned int clk)
>>  {
>> +     struct atp867x_priv *dp = ap->private_data;
>>       unsigned char clocks = clk;
>>
>>       switch (clocks) {
>> @@ -166,15 +168,25 @@ static int
>> atp867x_get_active_clocks_shifted(unsigned int clk)
>>               break;
>>       case 1 ... 7:
>>               break;
>> -     case 8 ... 12:
>> +     case 9 ... 12:
>>               clocks = 7;
>>               break;
>>       default:
>>               printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
>>                       "Using default 8clk.\n", clk);
>> -             clocks = 0;     /* 8 clk */
>> -             break;
>> +     case 8: /* default 8 clk */
>> +             clocks = 0;
>> +             goto active_clock_shift_done;
>>       }
>> +
>> +     /*
>> +      * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
>> +      * on 66MHz bus
>> +      */
>> +     if (dp->pci66mhz && clocks < 7)
>> +             clocks++;
>> +
>> +active_clock_shift_done:
>>       return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>>  }
>>
>> @@ -188,20 +200,19 @@ static int
>> atp867x_get_recover_clocks_shifted(unsigned int clk)
>>               break;
>>       case 1 ... 11:
>>               break;
>> -     case 12:
>> -             clocks = 0;
>> -             break;
>>       case 13: case 14:
>> -             --clocks;
>> +             --clocks;       /* by the spec */
>>               break;
>>       case 15:
>>               break;
>>       default:
>>               printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
>>                       "Using default 12clk.\n", clk);
>> -             clocks = 0;     /* 12 clk */
>> +     case 12:        /* default 12 clk */
>> +             clocks = 0;
>>               break;
>>       }
>> +
>>       return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
>>  }
>>
>> @@ -230,10 +241,8 @@ static void atp867x_set_piomode(struct ata_port
>> *ap, struct ata_device *adev)
>>               b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
>>       iowrite8(b, dp->dma_mode);
>>
>> -     b = atp867x_get_active_clocks_shifted(t.active) |
>> +     b = atp867x_get_active_clocks_shifted(ap, t.active) |
>>               atp867x_get_recover_clocks_shifted(t.recover);
>> -     if (dp->pci66mhz)
>> -             b += 0x10;
>>
>>       if (adev->devno & 1)
>>               iowrite8(b, dp->slave_piospd);
>> @@ -246,9 +255,24 @@ static void atp867x_set_piomode(struct ata_port
>> *ap, struct ata_device *adev)
>>       iowrite8(b, dp->eightb_piospd);
>>  }
>>
>> +static int atp867x_cable_override(struct pci_dev *pdev)
>> +{
>> +     if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
>> +             (pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
>> +              pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
>> +             return 1;
>> +     }
>> +     return 0;
>> +}
>> +
>>  static int atp867x_cable_detect(struct ata_port *ap)
>>  {
>> -     return ATA_CBL_PATA40_SHORT;
>> +     struct pci_dev *pdev = to_pci_dev(ap->host->dev);
>> +
>> +     if (atp867x_cable_override(pdev))
>> +             return ATA_CBL_PATA40_SHORT;
>> +
>> +     return ATA_CBL_PATA_UNK;
>>  }
>>
>>  static struct scsi_host_template atp867x_sht = {
>
> Thanks, your patch looks good to me but since there are still some
> leftover issues left we would also need something like the incremental
> patch below:

[resending - bounced back from -ide, -kernel]

your patch below looks good to me.
-John

>
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] pata_atp867x: PIO support fixes
>
> * use  8 clk setting for active clocks == 7 (was 12 clk)
> * use 12 clk setting for active clocks > 12 (was  8 clk)
> * do 66MHz bus fixup before mapping active clocks
> * fix setup of PIO command timings
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
>  drivers/ata/pata_atp867x.c |   36 +++++++++++++++++++-----------------
>  1 file changed, 19 insertions(+), 17 deletions(-)
>
> Index: b/drivers/ata/pata_atp867x.c
> ===================================================================
> --- a/drivers/ata/pata_atp867x.c
> +++ b/drivers/ata/pata_atp867x.c
> @@ -155,30 +155,31 @@ static int atp867x_get_active_clocks_shi
>        struct atp867x_priv *dp = ap->private_data;
>        unsigned char clocks = clk;
>
> +       /*
> +        * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> +        * on 66MHz bus
> +        */
> +       if (dp->pci66mhz)
> +               clocks++;
> +
>        switch (clocks) {
>        case 0:
>                clocks = 1;
>                break;
> -       case 1 ... 7:
> -               break;
> -       case 9 ... 12:
> -               clocks = 7;
> +       case 1 ... 6:
>                break;
>        default:
>                printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> -                       "Using default 8clk.\n", clk);
> +                       "Using 12clk.\n", clk);
> +       case 9 ... 12:
> +               clocks = 7;     /* 12 clk */
> +               break;
> +       case 7:
>        case 8: /* default 8 clk */
>                clocks = 0;
>                goto active_clock_shift_done;
>        }
>
> -       /*
> -        * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> -        * on 66MHz bus
> -        */
> -       if (dp->pci66mhz && clocks < 7)
> -               clocks++;
> -
>  active_clock_shift_done:
>        return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>  }
> @@ -193,7 +194,8 @@ static int atp867x_get_recover_clocks_sh
>                break;
>        case 1 ... 11:
>                break;
> -       case 13: case 14:
> +       case 13:
> +       case 14:
>                --clocks;       /* by the spec */
>                break;
>        case 15:
> @@ -235,16 +237,16 @@ static void atp867x_set_piomode(struct a
>        iowrite8(b, dp->dma_mode);
>
>        b = atp867x_get_active_clocks_shifted(ap, t.active) |
> -               atp867x_get_recover_clocks_shifted(t.recover);
> +           atp867x_get_recover_clocks_shifted(t.recover);
>
>        if (adev->devno & 1)
>                iowrite8(b, dp->slave_piospd);
>        else
>                iowrite8(b, dp->mstr_piospd);
>
> -       /*
> -        * use the same value for comand timing as for PIO timimg
> -        */
> +       b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
> +           atp867x_get_recover_clocks_shifted(t.rec8b);
> +
>        iowrite8(b, dp->eightb_piospd);
>  }
>
>

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-22  2:36   ` Jung-Ik (John) Lee
@ 2009-09-28 15:34     ` Bartlomiej Zolnierkiewicz
  2009-09-28 20:20       ` Jung-Ik (John) Lee
                         ` (2 more replies)
  0 siblings, 3 replies; 95+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-09-28 15:34 UTC (permalink / raw)
  To: Jung-Ik (John) Lee
  Cc: Jeff Garzik, Andrew Morton, Linus Torvalds, linux-ide, LKML,
	Grant Grundler, Gwendal Gringo

On Tuesday 22 September 2009 04:36:13 Jung-Ik (John) Lee wrote:
> On Sun, Sep 20, 2009 at 2:05 PM, Bartlomiej Zolnierkiewicz
> <bzolnier@gmail.com> wrote:
> > On Thursday 17 September 2009 22:49:35 Jeff Garzik wrote:
> >>
> >> Bug fixes, and a new driver.
> >>
> >>
> >>
> >> Please pull from 'upstream-linus' branch of
> >> master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
> >>
> >> to receive the following updates:
> >>
> >>  drivers/ata/Kconfig        |    9 +
> >>  drivers/ata/Makefile       |    1 +
> >>  drivers/ata/ahci.c         |    4 +-
> >>  drivers/ata/libata-core.c  |    4 +-
> >>  drivers/ata/pata_amd.c     |    3 +
> >>  drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
> >>  drivers/ata/sata_promise.c |  155 +++++++++++--
> >>  include/linux/pci_ids.h    |    2 +
> >>  8 files changed, 704 insertions(+), 22 deletions(-)
> >>  create mode 100644 drivers/ata/pata_atp867x.c
> >>
> >> John(Jung-Ik) Lee (1):
> >>       libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers
> >
> > That was really fast..  Not necessarily a bad thing but this driver would
> > benefit from few polishing touches..
> >
> >> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
> >> new file mode 100644
> >> index 0000000..7990de9
> >> --- /dev/null
> >> +++ b/drivers/ata/pata_atp867x.c
> >> @@ -0,0 +1,548 @@
> >> +/*
> >> + * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
> >> + *
> >> + *   (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
> >> + *
> >> + * Per Atp867 data sheet rev 1.2, Acard.
> >> + * Based in part on early ide code from
> >> + *   2003-2004 by Eric Uhrhane, Google, Inc.
> >> + *
> >> + * This program is free software; you can redistribute it and/or modify
> >> + * it under the terms of the GNU General Public License as published by
> >> + * the Free Software Foundation; either version 2 of the License, or
> >> + * (at your option) any later version.
> >> + *
> >> + * This program is distributed in the hope that it will be useful,
> >> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> >> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> >> + * GNU General Public License for more details.
> >> + *
> >> + * You should have received a copy of the GNU General Public License
> >> + * along with this program; if not, write to the Free Software
> >> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> >> + *
> >> + *
> >> + * TODO:
> >> + *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
> >> + */
> >> +
> >> +#include <linux/kernel.h>
> >> +#include <linux/module.h>
> >> +#include <linux/pci.h>
> >> +#include <linux/init.h>
> >> +#include <linux/blkdev.h>
> >> +#include <linux/delay.h>
> >> +#include <linux/device.h>
> >> +#include <scsi/scsi_host.h>
> >> +#include <linux/libata.h>
> >> +
> >> +#define      DRV_NAME        "pata_atp867x"
> >> +#define      DRV_VERSION     "0.7.5"
> >> +
> >> +/*
> >> + * IO Registers
> >> + * Note that all runtime hot priv ports are cached in ap private_data
> >> + */
> >> +
> >> +enum {
> >> +     ATP867X_IO_CHANNEL_OFFSET       = 0x10,
> >> +
> >> +     /*
> >> +      * IO Register Bitfields
> >> +      */
> >> +
> >> +     ATP867X_IO_PIOSPD_ACTIVE_SHIFT  = 4,
> >> +     ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
> >> +
> >> +     ATP867X_IO_DMAMODE_MSTR_SHIFT   = 0,
> >> +     ATP867X_IO_DMAMODE_MSTR_MASK    = 0x07,
> >> +     ATP867X_IO_DMAMODE_SLAVE_SHIFT  = 4,
> >> +     ATP867X_IO_DMAMODE_SLAVE_MASK   = 0x70,
> >> +
> >> +     ATP867X_IO_DMAMODE_UDMA_6       = 0x07,
> >> +     ATP867X_IO_DMAMODE_UDMA_5       = 0x06,
> >> +     ATP867X_IO_DMAMODE_UDMA_4       = 0x05,
> >> +     ATP867X_IO_DMAMODE_UDMA_3       = 0x04,
> >> +     ATP867X_IO_DMAMODE_UDMA_2       = 0x03,
> >> +     ATP867X_IO_DMAMODE_UDMA_1       = 0x02,
> >> +     ATP867X_IO_DMAMODE_UDMA_0       = 0x01,
> >> +     ATP867X_IO_DMAMODE_DISABLE      = 0x00,
> >> +
> >> +     ATP867X_IO_SYS_INFO_66MHZ       = 0x04,
> >> +     ATP867X_IO_SYS_INFO_SLOW_UDMA5  = 0x02,
> >> +     ATP867X_IO_SYS_MASK_RESERVED    = (~0xf1),
> >> +
> >> +     ATP867X_IO_PORTSPD_VAL          = 0x1143,
> >> +     ATP867X_PREREAD_VAL             = 0x0200,
> >> +
> >> +     ATP867X_NUM_PORTS               = 4,
> >> +     ATP867X_BAR_IOBASE              = 0,
> >> +     ATP867X_BAR_ROMBASE             = 6,
> >> +};
> >> +
> >> +#define ATP867X_IOBASE(ap)           ((ap)->host->iomap[0])
> >> +#define ATP867X_SYS_INFO(ap)         (0x3F + ATP867X_IOBASE(ap))
> >> +
> >> +#define ATP867X_IO_PORTBASE(ap, port)        (0x00 + ATP867X_IOBASE(ap) + \
> >> +                                     (port) * ATP867X_IO_CHANNEL_OFFSET)
> >> +#define ATP867X_IO_DMABASE(ap, port) (0x40 + \
> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
> >> +
> >> +#define ATP867X_IO_STATUS(ap, port)  (0x07 + \
> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
> >> +#define ATP867X_IO_ALTSTATUS(ap, port)       (0x0E + \
> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
> >> +
> >> +/*
> >> + * hot priv ports
> >> + */
> >> +#define ATP867X_IO_MSTRPIOSPD(ap, port)      (0x08 + \
> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
> >> +#define ATP867X_IO_SLAVPIOSPD(ap, port)      (0x09 + \
> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
> >> +#define ATP867X_IO_8BPIOSPD(ap, port)        (0x0A + \
> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
> >> +#define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
> >> +                                     ATP867X_IO_DMABASE((ap), (port)))
> >> +
> >> +#define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
> >> +#define ATP867X_IO_PREREAD(ap, port) (0x4C + \
> >> +                                     ATP867X_IO_PORTBASE((ap), (port)))
> >> +
> >> +struct atp867x_priv {
> >> +     void __iomem *dma_mode;
> >> +     void __iomem *mstr_piospd;
> >> +     void __iomem *slave_piospd;
> >> +     void __iomem *eightb_piospd;
> >> +     int             pci66mhz;
> >> +};
> >> +
> >> +static inline u8 atp867x_speed_to_mode(u8 speed)
> >> +{
> >> +     return speed - XFER_UDMA_0 + 1;
> >> +}
> >> +
> >> +static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
> >> +{
> >> +     struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
> >> +     struct atp867x_priv *dp = ap->private_data;
> >> +     u8 speed = adev->dma_mode;
> >> +     u8 b;
> >> +     u8 mode;
> >> +
> >> +     mode = atp867x_speed_to_mode(speed);
> >
> > The driver currently doesn't support MWDMA modes but claims otherwise
> > (fixed in the attached patch).
> >
> >> +     /*
> >> +      * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
> >> +      * on 66MHz bus
> >> +      *   rev-A: UDMA_1~4 (5, 6 no change)
> >> +      *   rev-B: all UDMA modes
> >> +      *   UDMA_0 stays not to disable UDMA
> >> +      */
> >> +     if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
> >> +        (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
> >> +         mode < ATP867X_IO_DMAMODE_UDMA_5))
> >> +             mode--;
> >> +
> >> +     b = ioread8(dp->dma_mode);
> >> +     if (adev->devno & 1) {
> >> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
> >> +                     (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
> >> +     } else {
> >> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
> >> +                     (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
> >> +     }
> >> +     iowrite8(b, dp->dma_mode);
> >> +}
> >> +
> >> +static int atp867x_get_active_clocks_shifted(unsigned int clk)
> >> +{
> >> +     unsigned char clocks = clk;
> >> +
> >> +     switch (clocks) {
> >> +     case 0:
> >> +             clocks = 1;
> >> +             break;
> >> +     case 1 ... 7:
> >> +             break;
> >> +     case 8 ... 12:
> >> +             clocks = 7;
> >
> > Shouldn't "clocks = 0" (the default case) be used here?
> 
> The clocks value 0 sets it to 8 clocks, while value 7 sets to 12 clocks.

This would explain it but then there is no need to use "clocks = 7"
for the _input_ "clocks == 7".

> I cleaned up a bit on clocks_shift. See the patch below.
> 
> > Otherwise it seems to result in underclocked timings for dp->pci66mhz == 0.
> >
> >> +             break;
> >> +     default:
> >> +             printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> >> +                     "Using default 8clk.\n", clk);
> >> +             clocks = 0;     /* 8 clk */
> >> +             break;
> >> +     }
> >> +     return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
> >> +}
> >> +
> >> +static int atp867x_get_recover_clocks_shifted(unsigned int clk)
> >> +{
> >> +     unsigned char clocks = clk;
> >> +
> >> +     switch (clocks) {
> >> +     case 0:
> >> +             clocks = 1;
> >> +             break;
> >> +     case 1 ... 11:
> >> +             break;
> >> +     case 12:
> >> +             clocks = 0;
> >> +             break;
> >> +     case 13: case 14:
> >> +             --clocks;
> >> +             break;
> >
> > Is "clocks == 14" a reserved setting?
> 
> 12 is reserved for the default (== 0), and 13, 14 are set to value 12,
> 13 respectively.

I meant the _output_ "clocks == 14" here.

> >
> > If so a comment documenting it would be appreciated.
> 
> Sure. see the new patch below.
> 
> >
> >> +     case 15:
> >> +             break;
> >> +     default:
> >> +             printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
> >> +                     "Using default 15clk.\n", clk);
> >> +             clocks = 0;     /* 12 clk */
> >
> > Shouldn't it use "clocks == 15" setting?
> It was a typo. 12 is the right default.
> 
> >
> >> +             break;
> >> +     }
> >> +     return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
> >> +}
> >> +
> >> +static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
> >> +{
> >> +     struct ata_device *peer = ata_dev_pair(adev);
> >> +     struct atp867x_priv *dp = ap->private_data;
> >> +     u8 speed = adev->pio_mode;
> >> +     struct ata_timing t, p;
> >> +     int T, UT;
> >> +     u8 b;
> >> +
> >> +     T = 1000000000 / 33333;
> >> +     UT = T / 4;
> >> +
> >> +     ata_timing_compute(adev, speed, &t, T, UT);
> >> +     if (peer && peer->pio_mode) {
> >> +             ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
> >> +             ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
> >> +     }
> >> +
> >> +     b = ioread8(dp->dma_mode);
> >> +     if (adev->devno & 1)
> >> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
> >> +     else
> >> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
> >> +     iowrite8(b, dp->dma_mode);
> >> +
> >> +     b = atp867x_get_active_clocks_shifted(t.active) |
> >> +             atp867x_get_recover_clocks_shifted(t.recover);
> >> +     if (dp->pci66mhz)
> >> +             b += 0x10;
> >
> > What is the purpose of the above hack?
> 
> For safe PIO mode according to spec.
> 
> >
> > AFAICS (I don't have a datasheet) it may result in invalid active
> > clocks being used for t.active > 12 and 0x80 bit being set incorrectly
> > for t.active values 7..12 (unless it was the purpose of the hack).
> 
> See the patch below..
> 
> >
> >> +     if (adev->devno & 1)
> >> +             iowrite8(b, dp->slave_piospd);
> >> +     else
> >> +             iowrite8(b, dp->mstr_piospd);
> >> +
> >> +     /*
> >> +      * use the same value for comand timing as for PIO timimg
> >> +      */
> >> +     iowrite8(b, dp->eightb_piospd);
> >
> > This is incorrect if slave/master devices use different PIO modes
> > or if PIO mode <= 2 is used by any device.
> >
> > Timing based on t.act8b and t.rec8b values should be used instead.
> 
> act8b and rec8b have the same values as active, recovery of the port.

Please take a look at drivers/ata/libata-core.c::ata_timing[] table:

...
	{ XFER_PIO_0,     70, 290, 240, 600, 165, 150, 0,  600,   0 },
	{ XFER_PIO_1,     50, 290,  93, 383, 125, 100, 0,  383,   0 },
	{ XFER_PIO_2,     30, 290,  40, 330, 100,  90, 0,  240,   0 },
	{ XFER_PIO_3,     30,  80,  70, 180,  80,  70, 0,  180,   0 },
	{ XFER_PIO_4,     25,  70,  25, 120,  70,  25, 0,  120,   0 },
	{ XFER_PIO_5,     15,  65,  25, 100,  65,  25, 0,  100,   0 },
	{ XFER_PIO_6,     10,  55,  20,  80,  55,  20, 0,   80,   0 },
...

For PIO modes <= 2 (or if master/slave devices use different PIO modes)
we'll have different values, i.e. for PIO2 in case of a single device on
the port using standard timings we'll have:

t.active   =  4
t.recovery =  4
t.act8b    = 10
t.rec8b    =  2

Most likely we won't see much use of this driver with older devices,
however this should not stop us from supporting them and at the same
time making the driver easier to maintain.

> If a:r=3:1 then they become 4:1 on 66mhz for safer transfer, and
> a8:r8=3:1, which is identical but the a8 should be incremented by 1.
> I can use a8:r8 with 66mhz fixup but it becomes the same as using a:r.
> Take a look at the patch below.
> 
> >
> > On the somehow related note:
> >
> > * I don't see how PIO0-2 command timings can be met with only 3 bits
> >  used for active clocks.  Could it be that dp->eight_piospd should be
> >  programmed in a slightly different way than dp->{mstr,slave}_piospd?
> >
> 
> See new patch on clocks_shift below.
> 
> > * The controller allows higher clocks values for recovery timings but
> >  ata_timing_compute() tries to fairly increase both recovery and active
> >  timings to meet the required cycle timing.
> >
> >> +}
> >> +
> >> +static int atp867x_cable_detect(struct ata_port *ap)
> >> +{
> >> +     return ATA_CBL_PATA40_SHORT;
> >> +}
> >
> > As noticed by Robert and Alan already:
> >
> > This should use ATA_CBL_PATA_UNK and rely on the driver-side cable detection.
> 
> I modified cable_detect() to use override; on a certain
> subsystem_vendor|device, its 40short, others, unknown.
> 
> >
> >
> > One last thing: Power Management support is missing from this driver
> > (I tried addressing this in the separately posted patch but it needs
> > testing by somebody with the hardware).
> >
> >
> > MWDMA fix:
> >
> > From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> > Subject: [PATCH] pata_atp867x: fix it to not claim MWDMA support
> >
> > MWDMA modes are not supported by this driver currently.
> >
> > Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> > ---
> >  drivers/ata/pata_atp867x.c |   10 +---------
> >  1 file changed, 1 insertion(+), 9 deletions(-)
> >
> > Index: b/drivers/ata/pata_atp867x.c
> > ===================================================================
> > --- a/drivers/ata/pata_atp867x.c
> > +++ b/drivers/ata/pata_atp867x.c
> > @@ -118,20 +118,13 @@ struct atp867x_priv {
> >        int             pci66mhz;
> >  };
> >
> > -static inline u8 atp867x_speed_to_mode(u8 speed)
> > -{
> > -       return speed - XFER_UDMA_0 + 1;
> > -}
> > -
> >  static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
> >  {
> >        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
> >        struct atp867x_priv *dp = ap->private_data;
> >        u8 speed = adev->dma_mode;
> >        u8 b;
> > -       u8 mode;
> > -
> > -       mode = atp867x_speed_to_mode(speed);
> > +       u8 mode = speed - XFER_UDMA_0 + 1;
> >
> >        /*
> >         * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
> > @@ -471,7 +464,6 @@ static int atp867x_init_one(struct pci_d
> >        static const struct ata_port_info info_867x = {
> >                .flags          = ATA_FLAG_SLAVE_POSS,
> >                .pio_mask       = ATA_PIO4,
> > -               .mwdma_mask     = ATA_MWDMA2,
> 
> This looks good to me. thx.
> 
> >                .udma_mask      = ATA_UDMA6,
> >                .port_ops       = &atp867x_ops,
> >        };
> >
> 
> 
> From: John(Jung-Ik) Lee <jilee@google.com>
> 
> clarifications in timings calculations and cable detection
> 
> Signed-off-by: John(Jung-Ik) Lee <jilee@google.com>
> ---
> 
>  pata_atp867x.c |   50 +++++++++++++++++++++++++++++++++++++-------------
>  1 files changed, 37 insertions, 13 deletions
> 
> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
> index e6c4706..c1c691f 100644
> --- a/drivers/ata/pata_atp867x.c
> +++ b/drivers/ata/pata_atp867x.c
> @@ -156,8 +156,10 @@ static void atp867x_set_dmamode(struct ata_port
> *ap, struct ata_device *adev)
>  	iowrite8(b, dp->dma_mode);
>  }
> 
> -static int atp867x_get_active_clocks_shifted(unsigned int clk)
> +static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
> +	unsigned int clk)
>  {
> +	struct atp867x_priv *dp = ap->private_data;
>  	unsigned char clocks = clk;
> 
>  	switch (clocks) {
> @@ -166,15 +168,25 @@ static int
> atp867x_get_active_clocks_shifted(unsigned int clk)
>  		break;
>  	case 1 ... 7:
>  		break;
> -	case 8 ... 12:
> +	case 9 ... 12:
>  		clocks = 7;
>  		break;
>  	default:
>  		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
>  			"Using default 8clk.\n", clk);
> -		clocks = 0;	/* 8 clk */
> -		break;
> +	case 8:	/* default 8 clk */
> +		clocks = 0;
> +		goto active_clock_shift_done;
>  	}
> +
> +	/*
> +	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
> +	 * on 66MHz bus
> +	 */
> +	if (dp->pci66mhz && clocks < 7)
> +		clocks++;
> +
> +active_clock_shift_done:
>  	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>  }
> 
> @@ -188,20 +200,19 @@ static int
> atp867x_get_recover_clocks_shifted(unsigned int clk)
>  		break;
>  	case 1 ... 11:
>  		break;
> -	case 12:
> -		clocks = 0;
> -		break;
>  	case 13: case 14:
> -		--clocks;
> +		--clocks;	/* by the spec */
>  		break;
>  	case 15:
>  		break;
>  	default:
>  		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
>  			"Using default 12clk.\n", clk);
> -		clocks = 0;	/* 12 clk */
> +	case 12:	/* default 12 clk */
> +		clocks = 0;
>  		break;
>  	}
> +
>  	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
>  }
> 
> @@ -230,10 +241,8 @@ static void atp867x_set_piomode(struct ata_port
> *ap, struct ata_device *adev)
>  		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
>  	iowrite8(b, dp->dma_mode);
> 
> -	b = atp867x_get_active_clocks_shifted(t.active) |
> +	b = atp867x_get_active_clocks_shifted(ap, t.active) |
>  		atp867x_get_recover_clocks_shifted(t.recover);
> -	if (dp->pci66mhz)
> -		b += 0x10;
> 
>  	if (adev->devno & 1)
>  		iowrite8(b, dp->slave_piospd);
> @@ -246,9 +255,24 @@ static void atp867x_set_piomode(struct ata_port
> *ap, struct ata_device *adev)
>  	iowrite8(b, dp->eightb_piospd);
>  }
> 
> +static int atp867x_cable_override(struct pci_dev *pdev)
> +{
> +	if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
> +		(pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
> +		 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
> +		return 1;
> +	}
> +	return 0;
> +}
> +
>  static int atp867x_cable_detect(struct ata_port *ap)
>  {
> -	return ATA_CBL_PATA40_SHORT;
> +	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
> +
> +	if (atp867x_cable_override(pdev))
> +		return ATA_CBL_PATA40_SHORT;
> +
> +	return ATA_CBL_PATA_UNK;
>  }
> 
>  static struct scsi_host_template atp867x_sht = {

Thanks, your patch looks good to me but since there are still some
leftover issues left we would also need something like the incremental
patch below:

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_atp867x: PIO support fixes

* use  8 clk setting for active clocks == 7 (was 12 clk)
* use 12 clk setting for active clocks > 12 (was  8 clk)
* do 66MHz bus fixup before mapping active clocks
* fix setup of PIO command timings

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ata/pata_atp867x.c |   36 +++++++++++++++++++-----------------
 1 file changed, 19 insertions(+), 17 deletions(-)

Index: b/drivers/ata/pata_atp867x.c
===================================================================
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -155,30 +155,31 @@ static int atp867x_get_active_clocks_shi
 	struct atp867x_priv *dp = ap->private_data;
 	unsigned char clocks = clk;
 
+	/*
+	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+	 * on 66MHz bus
+	 */
+	if (dp->pci66mhz)
+		clocks++;
+
 	switch (clocks) {
 	case 0:
 		clocks = 1;
 		break;
-	case 1 ... 7:
-		break;
-	case 9 ... 12:
-		clocks = 7;
+	case 1 ... 6:
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
-			"Using default 8clk.\n", clk);
+			"Using 12clk.\n", clk);
+	case 9 ... 12:
+		clocks = 7;	/* 12 clk */
+		break;
+	case 7:
 	case 8:	/* default 8 clk */
 		clocks = 0;
 		goto active_clock_shift_done;
 	}
 
-	/*
-	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
-	 * on 66MHz bus
-	 */
-	if (dp->pci66mhz && clocks < 7)
-		clocks++;
-
 active_clock_shift_done:
 	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
 }
@@ -193,7 +194,8 @@ static int atp867x_get_recover_clocks_sh
 		break;
 	case 1 ... 11:
 		break;
-	case 13: case 14:
+	case 13:
+	case 14:
 		--clocks;	/* by the spec */
 		break;
 	case 15:
@@ -235,16 +237,16 @@ static void atp867x_set_piomode(struct a
 	iowrite8(b, dp->dma_mode);
 
 	b = atp867x_get_active_clocks_shifted(ap, t.active) |
-		atp867x_get_recover_clocks_shifted(t.recover);
+	    atp867x_get_recover_clocks_shifted(t.recover);
 
 	if (adev->devno & 1)
 		iowrite8(b, dp->slave_piospd);
 	else
 		iowrite8(b, dp->mstr_piospd);
 
-	/*
-	 * use the same value for comand timing as for PIO timimg
-	 */
+	b = atp867x_get_active_clocks_shifted(ap, t.act8b) |
+	    atp867x_get_recover_clocks_shifted(t.rec8b);
+
 	iowrite8(b, dp->eightb_piospd);
 }
 

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-20 21:05 ` Bartlomiej Zolnierkiewicz
@ 2009-09-22  2:36   ` Jung-Ik (John) Lee
  2009-09-28 15:34     ` Bartlomiej Zolnierkiewicz
  0 siblings, 1 reply; 95+ messages in thread
From: Jung-Ik (John) Lee @ 2009-09-22  2:36 UTC (permalink / raw)
  To: Bartlomiej Zolnierkiewicz
  Cc: Jeff Garzik, Andrew Morton, Linus Torvalds, linux-ide, LKML,
	Grant Grundler, Gwendal Gringo

On Sun, Sep 20, 2009 at 2:05 PM, Bartlomiej Zolnierkiewicz
<bzolnier@gmail.com> wrote:
> On Thursday 17 September 2009 22:49:35 Jeff Garzik wrote:
>>
>> Bug fixes, and a new driver.
>>
>>
>>
>> Please pull from 'upstream-linus' branch of
>> master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
>>
>> to receive the following updates:
>>
>>  drivers/ata/Kconfig        |    9 +
>>  drivers/ata/Makefile       |    1 +
>>  drivers/ata/ahci.c         |    4 +-
>>  drivers/ata/libata-core.c  |    4 +-
>>  drivers/ata/pata_amd.c     |    3 +
>>  drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
>>  drivers/ata/sata_promise.c |  155 +++++++++++--
>>  include/linux/pci_ids.h    |    2 +
>>  8 files changed, 704 insertions(+), 22 deletions(-)
>>  create mode 100644 drivers/ata/pata_atp867x.c
>>
>> John(Jung-Ik) Lee (1):
>>       libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers
>
> That was really fast..  Not necessarily a bad thing but this driver would
> benefit from few polishing touches..
>
>> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
>> new file mode 100644
>> index 0000000..7990de9
>> --- /dev/null
>> +++ b/drivers/ata/pata_atp867x.c
>> @@ -0,0 +1,548 @@
>> +/*
>> + * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
>> + *
>> + *   (C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
>> + *
>> + * Per Atp867 data sheet rev 1.2, Acard.
>> + * Based in part on early ide code from
>> + *   2003-2004 by Eric Uhrhane, Google, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + *
>> + * You should have received a copy of the GNU General Public License
>> + * along with this program; if not, write to the Free Software
>> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
>> + *
>> + *
>> + * TODO:
>> + *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
>> + */
>> +
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/pci.h>
>> +#include <linux/init.h>
>> +#include <linux/blkdev.h>
>> +#include <linux/delay.h>
>> +#include <linux/device.h>
>> +#include <scsi/scsi_host.h>
>> +#include <linux/libata.h>
>> +
>> +#define      DRV_NAME        "pata_atp867x"
>> +#define      DRV_VERSION     "0.7.5"
>> +
>> +/*
>> + * IO Registers
>> + * Note that all runtime hot priv ports are cached in ap private_data
>> + */
>> +
>> +enum {
>> +     ATP867X_IO_CHANNEL_OFFSET       = 0x10,
>> +
>> +     /*
>> +      * IO Register Bitfields
>> +      */
>> +
>> +     ATP867X_IO_PIOSPD_ACTIVE_SHIFT  = 4,
>> +     ATP867X_IO_PIOSPD_RECOVER_SHIFT = 0,
>> +
>> +     ATP867X_IO_DMAMODE_MSTR_SHIFT   = 0,
>> +     ATP867X_IO_DMAMODE_MSTR_MASK    = 0x07,
>> +     ATP867X_IO_DMAMODE_SLAVE_SHIFT  = 4,
>> +     ATP867X_IO_DMAMODE_SLAVE_MASK   = 0x70,
>> +
>> +     ATP867X_IO_DMAMODE_UDMA_6       = 0x07,
>> +     ATP867X_IO_DMAMODE_UDMA_5       = 0x06,
>> +     ATP867X_IO_DMAMODE_UDMA_4       = 0x05,
>> +     ATP867X_IO_DMAMODE_UDMA_3       = 0x04,
>> +     ATP867X_IO_DMAMODE_UDMA_2       = 0x03,
>> +     ATP867X_IO_DMAMODE_UDMA_1       = 0x02,
>> +     ATP867X_IO_DMAMODE_UDMA_0       = 0x01,
>> +     ATP867X_IO_DMAMODE_DISABLE      = 0x00,
>> +
>> +     ATP867X_IO_SYS_INFO_66MHZ       = 0x04,
>> +     ATP867X_IO_SYS_INFO_SLOW_UDMA5  = 0x02,
>> +     ATP867X_IO_SYS_MASK_RESERVED    = (~0xf1),
>> +
>> +     ATP867X_IO_PORTSPD_VAL          = 0x1143,
>> +     ATP867X_PREREAD_VAL             = 0x0200,
>> +
>> +     ATP867X_NUM_PORTS               = 4,
>> +     ATP867X_BAR_IOBASE              = 0,
>> +     ATP867X_BAR_ROMBASE             = 6,
>> +};
>> +
>> +#define ATP867X_IOBASE(ap)           ((ap)->host->iomap[0])
>> +#define ATP867X_SYS_INFO(ap)         (0x3F + ATP867X_IOBASE(ap))
>> +
>> +#define ATP867X_IO_PORTBASE(ap, port)        (0x00 + ATP867X_IOBASE(ap) + \
>> +                                     (port) * ATP867X_IO_CHANNEL_OFFSET)
>> +#define ATP867X_IO_DMABASE(ap, port) (0x40 + \
>> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> +
>> +#define ATP867X_IO_STATUS(ap, port)  (0x07 + \
>> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> +#define ATP867X_IO_ALTSTATUS(ap, port)       (0x0E + \
>> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> +
>> +/*
>> + * hot priv ports
>> + */
>> +#define ATP867X_IO_MSTRPIOSPD(ap, port)      (0x08 + \
>> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> +#define ATP867X_IO_SLAVPIOSPD(ap, port)      (0x09 + \
>> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> +#define ATP867X_IO_8BPIOSPD(ap, port)        (0x0A + \
>> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> +#define ATP867X_IO_DMAMODE(ap, port) (0x0B + \
>> +                                     ATP867X_IO_DMABASE((ap), (port)))
>> +
>> +#define ATP867X_IO_PORTSPD(ap, port) (0x4A + \
>> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> +#define ATP867X_IO_PREREAD(ap, port) (0x4C + \
>> +                                     ATP867X_IO_PORTBASE((ap), (port)))
>> +
>> +struct atp867x_priv {
>> +     void __iomem *dma_mode;
>> +     void __iomem *mstr_piospd;
>> +     void __iomem *slave_piospd;
>> +     void __iomem *eightb_piospd;
>> +     int             pci66mhz;
>> +};
>> +
>> +static inline u8 atp867x_speed_to_mode(u8 speed)
>> +{
>> +     return speed - XFER_UDMA_0 + 1;
>> +}
>> +
>> +static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
>> +{
>> +     struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
>> +     struct atp867x_priv *dp = ap->private_data;
>> +     u8 speed = adev->dma_mode;
>> +     u8 b;
>> +     u8 mode;
>> +
>> +     mode = atp867x_speed_to_mode(speed);
>
> The driver currently doesn't support MWDMA modes but claims otherwise
> (fixed in the attached patch).
>
>> +     /*
>> +      * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
>> +      * on 66MHz bus
>> +      *   rev-A: UDMA_1~4 (5, 6 no change)
>> +      *   rev-B: all UDMA modes
>> +      *   UDMA_0 stays not to disable UDMA
>> +      */
>> +     if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
>> +        (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
>> +         mode < ATP867X_IO_DMAMODE_UDMA_5))
>> +             mode--;
>> +
>> +     b = ioread8(dp->dma_mode);
>> +     if (adev->devno & 1) {
>> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
>> +                     (mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
>> +     } else {
>> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
>> +                     (mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
>> +     }
>> +     iowrite8(b, dp->dma_mode);
>> +}
>> +
>> +static int atp867x_get_active_clocks_shifted(unsigned int clk)
>> +{
>> +     unsigned char clocks = clk;
>> +
>> +     switch (clocks) {
>> +     case 0:
>> +             clocks = 1;
>> +             break;
>> +     case 1 ... 7:
>> +             break;
>> +     case 8 ... 12:
>> +             clocks = 7;
>
> Shouldn't "clocks = 0" (the default case) be used here?

The clocks value 0 sets it to 8 clocks, while value 7 sets to 12 clocks.
I cleaned up a bit on clocks_shift. See the patch below.

>
> Otherwise it seems to result in underclocked timings for dp->pci66mhz == 0.
>
>> +             break;
>> +     default:
>> +             printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
>> +                     "Using default 8clk.\n", clk);
>> +             clocks = 0;     /* 8 clk */
>> +             break;
>> +     }
>> +     return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
>> +}
>> +
>> +static int atp867x_get_recover_clocks_shifted(unsigned int clk)
>> +{
>> +     unsigned char clocks = clk;
>> +
>> +     switch (clocks) {
>> +     case 0:
>> +             clocks = 1;
>> +             break;
>> +     case 1 ... 11:
>> +             break;
>> +     case 12:
>> +             clocks = 0;
>> +             break;
>> +     case 13: case 14:
>> +             --clocks;
>> +             break;
>
> Is "clocks == 14" a reserved setting?

12 is reserved for the default (== 0), and 13, 14 are set to value 12,
13 respectively.

>
> If so a comment documenting it would be appreciated.

Sure. see the new patch below.

>
>> +     case 15:
>> +             break;
>> +     default:
>> +             printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
>> +                     "Using default 15clk.\n", clk);
>> +             clocks = 0;     /* 12 clk */
>
> Shouldn't it use "clocks == 15" setting?
It was a typo. 12 is the right default.

>
>> +             break;
>> +     }
>> +     return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
>> +}
>> +
>> +static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
>> +{
>> +     struct ata_device *peer = ata_dev_pair(adev);
>> +     struct atp867x_priv *dp = ap->private_data;
>> +     u8 speed = adev->pio_mode;
>> +     struct ata_timing t, p;
>> +     int T, UT;
>> +     u8 b;
>> +
>> +     T = 1000000000 / 33333;
>> +     UT = T / 4;
>> +
>> +     ata_timing_compute(adev, speed, &t, T, UT);
>> +     if (peer && peer->pio_mode) {
>> +             ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
>> +             ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
>> +     }
>> +
>> +     b = ioread8(dp->dma_mode);
>> +     if (adev->devno & 1)
>> +             b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
>> +     else
>> +             b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
>> +     iowrite8(b, dp->dma_mode);
>> +
>> +     b = atp867x_get_active_clocks_shifted(t.active) |
>> +             atp867x_get_recover_clocks_shifted(t.recover);
>> +     if (dp->pci66mhz)
>> +             b += 0x10;
>
> What is the purpose of the above hack?

For safe PIO mode according to spec.

>
> AFAICS (I don't have a datasheet) it may result in invalid active
> clocks being used for t.active > 12 and 0x80 bit being set incorrectly
> for t.active values 7..12 (unless it was the purpose of the hack).

See the patch below..

>
>> +     if (adev->devno & 1)
>> +             iowrite8(b, dp->slave_piospd);
>> +     else
>> +             iowrite8(b, dp->mstr_piospd);
>> +
>> +     /*
>> +      * use the same value for comand timing as for PIO timimg
>> +      */
>> +     iowrite8(b, dp->eightb_piospd);
>
> This is incorrect if slave/master devices use different PIO modes
> or if PIO mode <= 2 is used by any device.
>
> Timing based on t.act8b and t.rec8b values should be used instead.

act8b and rec8b have the same values as active, recovery of the port.
If a:r=3:1 then they become 4:1 on 66mhz for safer transfer, and
a8:r8=3:1, which is identical but the a8 should be incremented by 1.
I can use a8:r8 with 66mhz fixup but it becomes the same as using a:r.
Take a look at the patch below.

>
> On the somehow related note:
>
> * I don't see how PIO0-2 command timings can be met with only 3 bits
>  used for active clocks.  Could it be that dp->eight_piospd should be
>  programmed in a slightly different way than dp->{mstr,slave}_piospd?
>

See new patch on clocks_shift below.

> * The controller allows higher clocks values for recovery timings but
>  ata_timing_compute() tries to fairly increase both recovery and active
>  timings to meet the required cycle timing.
>
>> +}
>> +
>> +static int atp867x_cable_detect(struct ata_port *ap)
>> +{
>> +     return ATA_CBL_PATA40_SHORT;
>> +}
>
> As noticed by Robert and Alan already:
>
> This should use ATA_CBL_PATA_UNK and rely on the driver-side cable detection.

I modified cable_detect() to use override; on a certain
subsystem_vendor|device, its 40short, others, unknown.

>
>
> One last thing: Power Management support is missing from this driver
> (I tried addressing this in the separately posted patch but it needs
> testing by somebody with the hardware).
>
>
> MWDMA fix:
>
> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] pata_atp867x: fix it to not claim MWDMA support
>
> MWDMA modes are not supported by this driver currently.
>
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> ---
>  drivers/ata/pata_atp867x.c |   10 +---------
>  1 file changed, 1 insertion(+), 9 deletions(-)
>
> Index: b/drivers/ata/pata_atp867x.c
> ===================================================================
> --- a/drivers/ata/pata_atp867x.c
> +++ b/drivers/ata/pata_atp867x.c
> @@ -118,20 +118,13 @@ struct atp867x_priv {
>        int             pci66mhz;
>  };
>
> -static inline u8 atp867x_speed_to_mode(u8 speed)
> -{
> -       return speed - XFER_UDMA_0 + 1;
> -}
> -
>  static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
>  {
>        struct pci_dev *pdev    = to_pci_dev(ap->host->dev);
>        struct atp867x_priv *dp = ap->private_data;
>        u8 speed = adev->dma_mode;
>        u8 b;
> -       u8 mode;
> -
> -       mode = atp867x_speed_to_mode(speed);
> +       u8 mode = speed - XFER_UDMA_0 + 1;
>
>        /*
>         * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
> @@ -471,7 +464,6 @@ static int atp867x_init_one(struct pci_d
>        static const struct ata_port_info info_867x = {
>                .flags          = ATA_FLAG_SLAVE_POSS,
>                .pio_mask       = ATA_PIO4,
> -               .mwdma_mask     = ATA_MWDMA2,

This looks good to me. thx.

>                .udma_mask      = ATA_UDMA6,
>                .port_ops       = &atp867x_ops,
>        };
>


From: John(Jung-Ik) Lee <jilee@google.com>

clarifications in timings calculations and cable detection

Signed-off-by: John(Jung-Ik) Lee <jilee@google.com>
---

 pata_atp867x.c |   50 +++++++++++++++++++++++++++++++++++++-------------
 1 files changed, 37 insertions, 13 deletions

diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
index e6c4706..c1c691f 100644
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -156,8 +156,10 @@ static void atp867x_set_dmamode(struct ata_port
*ap, struct ata_device *adev)
 	iowrite8(b, dp->dma_mode);
 }

-static int atp867x_get_active_clocks_shifted(unsigned int clk)
+static int atp867x_get_active_clocks_shifted(struct ata_port *ap,
+	unsigned int clk)
 {
+	struct atp867x_priv *dp = ap->private_data;
 	unsigned char clocks = clk;

 	switch (clocks) {
@@ -166,15 +168,25 @@ static int
atp867x_get_active_clocks_shifted(unsigned int clk)
 		break;
 	case 1 ... 7:
 		break;
-	case 8 ... 12:
+	case 9 ... 12:
 		clocks = 7;
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
 			"Using default 8clk.\n", clk);
-		clocks = 0;	/* 8 clk */
-		break;
+	case 8:	/* default 8 clk */
+		clocks = 0;
+		goto active_clock_shift_done;
 	}
+
+	/*
+	 * Doc 6.6.9: increase the clock value by 1 for safer PIO speed
+	 * on 66MHz bus
+	 */
+	if (dp->pci66mhz && clocks < 7)
+		clocks++;
+
+active_clock_shift_done:
 	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
 }

@@ -188,20 +200,19 @@ static int
atp867x_get_recover_clocks_shifted(unsigned int clk)
 		break;
 	case 1 ... 11:
 		break;
-	case 12:
-		clocks = 0;
-		break;
 	case 13: case 14:
-		--clocks;
+		--clocks;	/* by the spec */
 		break;
 	case 15:
 		break;
 	default:
 		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
 			"Using default 12clk.\n", clk);
-		clocks = 0;	/* 12 clk */
+	case 12:	/* default 12 clk */
+		clocks = 0;
 		break;
 	}
+
 	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
 }

@@ -230,10 +241,8 @@ static void atp867x_set_piomode(struct ata_port
*ap, struct ata_device *adev)
 		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
 	iowrite8(b, dp->dma_mode);

-	b = atp867x_get_active_clocks_shifted(t.active) |
+	b = atp867x_get_active_clocks_shifted(ap, t.active) |
 		atp867x_get_recover_clocks_shifted(t.recover);
-	if (dp->pci66mhz)
-		b += 0x10;

 	if (adev->devno & 1)
 		iowrite8(b, dp->slave_piospd);
@@ -246,9 +255,24 @@ static void atp867x_set_piomode(struct ata_port
*ap, struct ata_device *adev)
 	iowrite8(b, dp->eightb_piospd);
 }

+static int atp867x_cable_override(struct pci_dev *pdev)
+{
+	if (pdev->subsystem_vendor == PCI_VENDOR_ID_ARTOP &&
+		(pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867A ||
+		 pdev->subsystem_device == PCI_DEVICE_ID_ARTOP_ATP867B)) {
+		return 1;
+	}
+	return 0;
+}
+
 static int atp867x_cable_detect(struct ata_port *ap)
 {
-	return ATA_CBL_PATA40_SHORT;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	if (atp867x_cable_override(pdev))
+		return ATA_CBL_PATA40_SHORT;
+
+	return ATA_CBL_PATA_UNK;
 }

 static struct scsi_host_template atp867x_sht = {

^ permalink raw reply	[flat|nested] 95+ messages in thread

* Re: [git patches] libata updates
  2009-09-17 20:49 Jeff Garzik
@ 2009-09-20 21:05 ` Bartlomiej Zolnierkiewicz
  2009-09-22  2:36   ` Jung-Ik (John) Lee
  0 siblings, 1 reply; 95+ messages in thread
From: Bartlomiej Zolnierkiewicz @ 2009-09-20 21:05 UTC (permalink / raw)
  To: Jeff Garzik
  Cc: Andrew Morton, Linus Torvalds, linux-ide, LKML, John Lee,
	Grant Grundler, Gwendal Gringo

On Thursday 17 September 2009 22:49:35 Jeff Garzik wrote:
> 
> Bug fixes, and a new driver.
> 
> 
> 
> Please pull from 'upstream-linus' branch of
> master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus
> 
> to receive the following updates:
> 
>  drivers/ata/Kconfig        |    9 +
>  drivers/ata/Makefile       |    1 +
>  drivers/ata/ahci.c         |    4 +-
>  drivers/ata/libata-core.c  |    4 +-
>  drivers/ata/pata_amd.c     |    3 +
>  drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/ata/sata_promise.c |  155 +++++++++++--
>  include/linux/pci_ids.h    |    2 +
>  8 files changed, 704 insertions(+), 22 deletions(-)
>  create mode 100644 drivers/ata/pata_atp867x.c
> 
> John(Jung-Ik) Lee (1):
>       libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers

That was really fast..  Not necessarily a bad thing but this driver would
benefit from few polishing touches..

> diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
> new file mode 100644
> index 0000000..7990de9
> --- /dev/null
> +++ b/drivers/ata/pata_atp867x.c
> @@ -0,0 +1,548 @@
> +/*
> + * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
> + *
> + *	(C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
> + *
> + * Per Atp867 data sheet rev 1.2, Acard.
> + * Based in part on early ide code from
> + *	2003-2004 by Eric Uhrhane, Google, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> + *
> + *
> + * TODO:
> + *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/pci.h>
> +#include <linux/init.h>
> +#include <linux/blkdev.h>
> +#include <linux/delay.h>
> +#include <linux/device.h>
> +#include <scsi/scsi_host.h>
> +#include <linux/libata.h>
> +
> +#define	DRV_NAME	"pata_atp867x"
> +#define	DRV_VERSION	"0.7.5"
> +
> +/*
> + * IO Registers
> + * Note that all runtime hot priv ports are cached in ap private_data
> + */
> +
> +enum {
> +	ATP867X_IO_CHANNEL_OFFSET	= 0x10,
> +
> +	/*
> +	 * IO Register Bitfields
> +	 */
> +
> +	ATP867X_IO_PIOSPD_ACTIVE_SHIFT	= 4,
> +	ATP867X_IO_PIOSPD_RECOVER_SHIFT	= 0,
> +
> +	ATP867X_IO_DMAMODE_MSTR_SHIFT	= 0,
> +	ATP867X_IO_DMAMODE_MSTR_MASK	= 0x07,
> +	ATP867X_IO_DMAMODE_SLAVE_SHIFT	= 4,
> +	ATP867X_IO_DMAMODE_SLAVE_MASK	= 0x70,
> +
> +	ATP867X_IO_DMAMODE_UDMA_6	= 0x07,
> +	ATP867X_IO_DMAMODE_UDMA_5	= 0x06,
> +	ATP867X_IO_DMAMODE_UDMA_4	= 0x05,
> +	ATP867X_IO_DMAMODE_UDMA_3	= 0x04,
> +	ATP867X_IO_DMAMODE_UDMA_2	= 0x03,
> +	ATP867X_IO_DMAMODE_UDMA_1	= 0x02,
> +	ATP867X_IO_DMAMODE_UDMA_0	= 0x01,
> +	ATP867X_IO_DMAMODE_DISABLE	= 0x00,
> +
> +	ATP867X_IO_SYS_INFO_66MHZ	= 0x04,
> +	ATP867X_IO_SYS_INFO_SLOW_UDMA5	= 0x02,
> +	ATP867X_IO_SYS_MASK_RESERVED	= (~0xf1),
> +
> +	ATP867X_IO_PORTSPD_VAL		= 0x1143,
> +	ATP867X_PREREAD_VAL		= 0x0200,
> +
> +	ATP867X_NUM_PORTS		= 4,
> +	ATP867X_BAR_IOBASE		= 0,
> +	ATP867X_BAR_ROMBASE		= 6,
> +};
> +
> +#define ATP867X_IOBASE(ap)		((ap)->host->iomap[0])
> +#define ATP867X_SYS_INFO(ap)		(0x3F + ATP867X_IOBASE(ap))
> +
> +#define ATP867X_IO_PORTBASE(ap, port)	(0x00 + ATP867X_IOBASE(ap) + \
> +					(port) * ATP867X_IO_CHANNEL_OFFSET)
> +#define ATP867X_IO_DMABASE(ap, port)	(0x40 + \
> +					ATP867X_IO_PORTBASE((ap), (port)))
> +
> +#define ATP867X_IO_STATUS(ap, port)	(0x07 + \
> +					ATP867X_IO_PORTBASE((ap), (port)))
> +#define ATP867X_IO_ALTSTATUS(ap, port)	(0x0E + \
> +					ATP867X_IO_PORTBASE((ap), (port)))
> +
> +/*
> + * hot priv ports
> + */
> +#define ATP867X_IO_MSTRPIOSPD(ap, port)	(0x08 + \
> +					ATP867X_IO_DMABASE((ap), (port)))
> +#define ATP867X_IO_SLAVPIOSPD(ap, port)	(0x09 + \
> +					ATP867X_IO_DMABASE((ap), (port)))
> +#define ATP867X_IO_8BPIOSPD(ap, port)	(0x0A + \
> +					ATP867X_IO_DMABASE((ap), (port)))
> +#define ATP867X_IO_DMAMODE(ap, port)	(0x0B + \
> +					ATP867X_IO_DMABASE((ap), (port)))
> +
> +#define ATP867X_IO_PORTSPD(ap, port)	(0x4A + \
> +					ATP867X_IO_PORTBASE((ap), (port)))
> +#define ATP867X_IO_PREREAD(ap, port)	(0x4C + \
> +					ATP867X_IO_PORTBASE((ap), (port)))
> +
> +struct atp867x_priv {
> +	void __iomem *dma_mode;
> +	void __iomem *mstr_piospd;
> +	void __iomem *slave_piospd;
> +	void __iomem *eightb_piospd;
> +	int		pci66mhz;
> +};
> +
> +static inline u8 atp867x_speed_to_mode(u8 speed)
> +{
> +	return speed - XFER_UDMA_0 + 1;
> +}
> +
> +static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
> +{
> +	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
> +	struct atp867x_priv *dp = ap->private_data;
> +	u8 speed = adev->dma_mode;
> +	u8 b;
> +	u8 mode;
> +
> +	mode = atp867x_speed_to_mode(speed);

The driver currently doesn't support MWDMA modes but claims otherwise
(fixed in the attached patch).

> +	/*
> +	 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
> +	 * on 66MHz bus
> +	 *   rev-A: UDMA_1~4 (5, 6 no change)
> +	 *   rev-B: all UDMA modes
> +	 *   UDMA_0 stays not to disable UDMA
> +	 */
> +	if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
> +	   (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
> +	    mode < ATP867X_IO_DMAMODE_UDMA_5))
> +		mode--;
> +
> +	b = ioread8(dp->dma_mode);
> +	if (adev->devno & 1) {
> +		b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
> +			(mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
> +	} else {
> +		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
> +			(mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
> +	}
> +	iowrite8(b, dp->dma_mode);
> +}
> +
> +static int atp867x_get_active_clocks_shifted(unsigned int clk)
> +{
> +	unsigned char clocks = clk;
> +
> +	switch (clocks) {
> +	case 0:
> +		clocks = 1;
> +		break;
> +	case 1 ... 7:
> +		break;
> +	case 8 ... 12:
> +		clocks = 7;

Shouldn't "clocks = 0" (the default case) be used here?

Otherwise it seems to result in underclocked timings for dp->pci66mhz == 0.

> +		break;
> +	default:
> +		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
> +			"Using default 8clk.\n", clk);
> +		clocks = 0;	/* 8 clk */
> +		break;
> +	}
> +	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
> +}
> +
> +static int atp867x_get_recover_clocks_shifted(unsigned int clk)
> +{
> +	unsigned char clocks = clk;
> +
> +	switch (clocks) {
> +	case 0:
> +		clocks = 1;
> +		break;
> +	case 1 ... 11:
> +		break;
> +	case 12:
> +		clocks = 0;
> +		break;
> +	case 13: case 14:
> +		--clocks;
> +		break;

Is "clocks == 14" a reserved setting?

If so a comment documenting it would be appreciated.

> +	case 15:
> +		break;
> +	default:
> +		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
> +			"Using default 15clk.\n", clk);
> +		clocks = 0;	/* 12 clk */

Shouldn't it use "clocks == 15" setting?

> +		break;
> +	}
> +	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
> +}
> +
> +static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
> +{
> +	struct ata_device *peer = ata_dev_pair(adev);
> +	struct atp867x_priv *dp = ap->private_data;
> +	u8 speed = adev->pio_mode;
> +	struct ata_timing t, p;
> +	int T, UT;
> +	u8 b;
> +
> +	T = 1000000000 / 33333;
> +	UT = T / 4;
> +
> +	ata_timing_compute(adev, speed, &t, T, UT);
> +	if (peer && peer->pio_mode) {
> +		ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
> +		ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
> +	}
> +
> +	b = ioread8(dp->dma_mode);
> +	if (adev->devno & 1)
> +		b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
> +	else
> +		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
> +	iowrite8(b, dp->dma_mode);
> +
> +	b = atp867x_get_active_clocks_shifted(t.active) |
> +		atp867x_get_recover_clocks_shifted(t.recover);
> +	if (dp->pci66mhz)
> +		b += 0x10;

What is the purpose of the above hack?

AFAICS (I don't have a datasheet) it may result in invalid active
clocks being used for t.active > 12 and 0x80 bit being set incorrectly
for t.active values 7..12 (unless it was the purpose of the hack).

> +	if (adev->devno & 1)
> +		iowrite8(b, dp->slave_piospd);
> +	else
> +		iowrite8(b, dp->mstr_piospd);
> +
> +	/*
> +	 * use the same value for comand timing as for PIO timimg
> +	 */
> +	iowrite8(b, dp->eightb_piospd);

This is incorrect if slave/master devices use different PIO modes
or if PIO mode <= 2 is used by any device.

Timing based on t.act8b and t.rec8b values should be used instead.

On the somehow related note:

* I don't see how PIO0-2 command timings can be met with only 3 bits
  used for active clocks.  Could it be that dp->eight_piospd should be
  programmed in a slightly different way than dp->{mstr,slave}_piospd?

* The controller allows higher clocks values for recovery timings but
  ata_timing_compute() tries to fairly increase both recovery and active
  timings to meet the required cycle timing.

> +}
> +
> +static int atp867x_cable_detect(struct ata_port *ap)
> +{
> +	return ATA_CBL_PATA40_SHORT;
> +}

As noticed by Robert and Alan already:

This should use ATA_CBL_PATA_UNK and rely on the driver-side cable detection.


One last thing: Power Management support is missing from this driver
(I tried addressing this in the separately posted patch but it needs
testing by somebody with the hardware).


MWDMA fix:

From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] pata_atp867x: fix it to not claim MWDMA support

MWDMA modes are not supported by this driver currently.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ata/pata_atp867x.c |   10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

Index: b/drivers/ata/pata_atp867x.c
===================================================================
--- a/drivers/ata/pata_atp867x.c
+++ b/drivers/ata/pata_atp867x.c
@@ -118,20 +118,13 @@ struct atp867x_priv {
 	int		pci66mhz;
 };
 
-static inline u8 atp867x_speed_to_mode(u8 speed)
-{
-	return speed - XFER_UDMA_0 + 1;
-}
-
 static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
 	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
 	struct atp867x_priv *dp = ap->private_data;
 	u8 speed = adev->dma_mode;
 	u8 b;
-	u8 mode;
-
-	mode = atp867x_speed_to_mode(speed);
+	u8 mode = speed - XFER_UDMA_0 + 1;
 
 	/*
 	 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
@@ -471,7 +464,6 @@ static int atp867x_init_one(struct pci_d
 	static const struct ata_port_info info_867x = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		.pio_mask	= ATA_PIO4,
-		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA6,
 		.port_ops	= &atp867x_ops,
 	};

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-09-17 20:49 Jeff Garzik
  2009-09-20 21:05 ` Bartlomiej Zolnierkiewicz
  0 siblings, 1 reply; 95+ messages in thread
From: Jeff Garzik @ 2009-09-17 20:49 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Bug fixes, and a new driver.



Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/Kconfig        |    9 +
 drivers/ata/Makefile       |    1 +
 drivers/ata/ahci.c         |    4 +-
 drivers/ata/libata-core.c  |    4 +-
 drivers/ata/pata_amd.c     |    3 +
 drivers/ata/pata_atp867x.c |  548 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/ata/sata_promise.c |  155 +++++++++++--
 include/linux/pci_ids.h    |    2 +
 8 files changed, 704 insertions(+), 22 deletions(-)
 create mode 100644 drivers/ata/pata_atp867x.c

John(Jung-Ik) Lee (1):
      libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers

Mikael Pettersson (2):
      sata_promise: disable hotplug on 1st gen chips
      sata_promise: update reset code

Robert Hancock (1):
      pata_amd: do not filter out valid modes in nv_mode_filter

Tejun Heo (2):
      ahci: restore pci_intx() handling
      libata: fix spurious WARN_ON_ONCE() on port freeze

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index ab2fa4e..f2df6e2 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -255,6 +255,15 @@ config PATA_ARTOP
 
 	  If unsure, say N.
 
+config PATA_ATP867X
+	tristate "ARTOP/Acard ATP867X PATA support"
+	depends on PCI
+	help
+	  This option enables support for ARTOP/Acard ATP867X PATA
+	  controllers.
+
+	  If unsure, say N.
+
 config PATA_AT32
 	tristate "Atmel AVR32 PATA support (Experimental)"
 	depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 463eb52..01e126f 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
 obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
 obj-$(CONFIG_PATA_AMD)		+= pata_amd.o
 obj-$(CONFIG_PATA_ARTOP)	+= pata_artop.o
+obj-$(CONFIG_PATA_ATP867X)	+= pata_atp867x.o
 obj-$(CONFIG_PATA_AT32)		+= pata_at32.o
 obj-$(CONFIG_PATA_ATIIXP)	+= pata_atiixp.o
 obj-$(CONFIG_PATA_CMD640_PCI)	+= pata_cmd640.o
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index d4cd9c2..acd1162 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -2930,8 +2930,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (ahci_sb600_32bit_only(pdev))
 		hpriv->flags |= AHCI_HFLAG_32BIT_ONLY;
 
-	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
-		pci_enable_msi(pdev);
+	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
+		pci_intx(pdev, 1);
 
 	/* save initial config */
 	ahci_save_initial_config(pdev, hpriv);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index df31dea..0ddaf43 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -5024,8 +5024,6 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 		struct ata_device *dev = qc->dev;
 		struct ata_eh_info *ehi = &dev->link->eh_info;
 
-		WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
-
 		if (unlikely(qc->err_mask))
 			qc->flags |= ATA_QCFLAG_FAILED;
 
@@ -5038,6 +5036,8 @@ void ata_qc_complete(struct ata_queued_cmd *qc)
 			}
 		}
 
+		WARN_ON_ONCE(ap->pflags & ATA_PFLAG_FROZEN);
+
 		/* read result TF if requested */
 		if (qc->flags & ATA_QCFLAG_RESULT_TF)
 			fill_result_tf(qc);
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 33a74f1..567f3f7 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -307,6 +307,9 @@ static unsigned long nv_mode_filter(struct ata_device *dev,
 		limit |= ATA_MASK_PIO;
 	if (!(limit & (ATA_MASK_MWDMA | ATA_MASK_UDMA)))
 		limit |= ATA_MASK_MWDMA | ATA_MASK_UDMA;
+	/* PIO4, MWDMA2, UDMA2 should always be supported regardless of
+	   cable detection result */
+	limit |= ata_pack_xfermask(ATA_PIO4, ATA_MWDMA2, ATA_UDMA2);
 
 	ata_port_printk(ap, KERN_DEBUG, "nv_mode_filter: 0x%lx&0x%lx->0x%lx, "
 			"BIOS=0x%lx (0x%x) ACPI=0x%lx%s\n",
diff --git a/drivers/ata/pata_atp867x.c b/drivers/ata/pata_atp867x.c
new file mode 100644
index 0000000..7990de9
--- /dev/null
+++ b/drivers/ata/pata_atp867x.c
@@ -0,0 +1,548 @@
+/*
+ * pata_atp867x.c - ARTOP 867X 64bit 4-channel UDMA133 ATA controller driver
+ *
+ *	(C) 2009 Google Inc. John(Jung-Ik) Lee <jilee@google.com>
+ *
+ * Per Atp867 data sheet rev 1.2, Acard.
+ * Based in part on early ide code from
+ *	2003-2004 by Eric Uhrhane, Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * TODO:
+ *   1. RAID features [comparison, XOR, striping, mirroring, etc.]
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include <linux/libata.h>
+
+#define	DRV_NAME	"pata_atp867x"
+#define	DRV_VERSION	"0.7.5"
+
+/*
+ * IO Registers
+ * Note that all runtime hot priv ports are cached in ap private_data
+ */
+
+enum {
+	ATP867X_IO_CHANNEL_OFFSET	= 0x10,
+
+	/*
+	 * IO Register Bitfields
+	 */
+
+	ATP867X_IO_PIOSPD_ACTIVE_SHIFT	= 4,
+	ATP867X_IO_PIOSPD_RECOVER_SHIFT	= 0,
+
+	ATP867X_IO_DMAMODE_MSTR_SHIFT	= 0,
+	ATP867X_IO_DMAMODE_MSTR_MASK	= 0x07,
+	ATP867X_IO_DMAMODE_SLAVE_SHIFT	= 4,
+	ATP867X_IO_DMAMODE_SLAVE_MASK	= 0x70,
+
+	ATP867X_IO_DMAMODE_UDMA_6	= 0x07,
+	ATP867X_IO_DMAMODE_UDMA_5	= 0x06,
+	ATP867X_IO_DMAMODE_UDMA_4	= 0x05,
+	ATP867X_IO_DMAMODE_UDMA_3	= 0x04,
+	ATP867X_IO_DMAMODE_UDMA_2	= 0x03,
+	ATP867X_IO_DMAMODE_UDMA_1	= 0x02,
+	ATP867X_IO_DMAMODE_UDMA_0	= 0x01,
+	ATP867X_IO_DMAMODE_DISABLE	= 0x00,
+
+	ATP867X_IO_SYS_INFO_66MHZ	= 0x04,
+	ATP867X_IO_SYS_INFO_SLOW_UDMA5	= 0x02,
+	ATP867X_IO_SYS_MASK_RESERVED	= (~0xf1),
+
+	ATP867X_IO_PORTSPD_VAL		= 0x1143,
+	ATP867X_PREREAD_VAL		= 0x0200,
+
+	ATP867X_NUM_PORTS		= 4,
+	ATP867X_BAR_IOBASE		= 0,
+	ATP867X_BAR_ROMBASE		= 6,
+};
+
+#define ATP867X_IOBASE(ap)		((ap)->host->iomap[0])
+#define ATP867X_SYS_INFO(ap)		(0x3F + ATP867X_IOBASE(ap))
+
+#define ATP867X_IO_PORTBASE(ap, port)	(0x00 + ATP867X_IOBASE(ap) + \
+					(port) * ATP867X_IO_CHANNEL_OFFSET)
+#define ATP867X_IO_DMABASE(ap, port)	(0x40 + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+
+#define ATP867X_IO_STATUS(ap, port)	(0x07 + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+#define ATP867X_IO_ALTSTATUS(ap, port)	(0x0E + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+
+/*
+ * hot priv ports
+ */
+#define ATP867X_IO_MSTRPIOSPD(ap, port)	(0x08 + \
+					ATP867X_IO_DMABASE((ap), (port)))
+#define ATP867X_IO_SLAVPIOSPD(ap, port)	(0x09 + \
+					ATP867X_IO_DMABASE((ap), (port)))
+#define ATP867X_IO_8BPIOSPD(ap, port)	(0x0A + \
+					ATP867X_IO_DMABASE((ap), (port)))
+#define ATP867X_IO_DMAMODE(ap, port)	(0x0B + \
+					ATP867X_IO_DMABASE((ap), (port)))
+
+#define ATP867X_IO_PORTSPD(ap, port)	(0x4A + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+#define ATP867X_IO_PREREAD(ap, port)	(0x4C + \
+					ATP867X_IO_PORTBASE((ap), (port)))
+
+struct atp867x_priv {
+	void __iomem *dma_mode;
+	void __iomem *mstr_piospd;
+	void __iomem *slave_piospd;
+	void __iomem *eightb_piospd;
+	int		pci66mhz;
+};
+
+static inline u8 atp867x_speed_to_mode(u8 speed)
+{
+	return speed - XFER_UDMA_0 + 1;
+}
+
+static void atp867x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct pci_dev *pdev	= to_pci_dev(ap->host->dev);
+	struct atp867x_priv *dp = ap->private_data;
+	u8 speed = adev->dma_mode;
+	u8 b;
+	u8 mode;
+
+	mode = atp867x_speed_to_mode(speed);
+
+	/*
+	 * Doc 6.6.9: decrease the udma mode value by 1 for safer UDMA speed
+	 * on 66MHz bus
+	 *   rev-A: UDMA_1~4 (5, 6 no change)
+	 *   rev-B: all UDMA modes
+	 *   UDMA_0 stays not to disable UDMA
+	 */
+	if (dp->pci66mhz && mode > ATP867X_IO_DMAMODE_UDMA_0  &&
+	   (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B ||
+	    mode < ATP867X_IO_DMAMODE_UDMA_5))
+		mode--;
+
+	b = ioread8(dp->dma_mode);
+	if (adev->devno & 1) {
+		b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK) |
+			(mode << ATP867X_IO_DMAMODE_SLAVE_SHIFT);
+	} else {
+		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK) |
+			(mode << ATP867X_IO_DMAMODE_MSTR_SHIFT);
+	}
+	iowrite8(b, dp->dma_mode);
+}
+
+static int atp867x_get_active_clocks_shifted(unsigned int clk)
+{
+	unsigned char clocks = clk;
+
+	switch (clocks) {
+	case 0:
+		clocks = 1;
+		break;
+	case 1 ... 7:
+		break;
+	case 8 ... 12:
+		clocks = 7;
+		break;
+	default:
+		printk(KERN_WARNING "ATP867X: active %dclk is invalid. "
+			"Using default 8clk.\n", clk);
+		clocks = 0;	/* 8 clk */
+		break;
+	}
+	return clocks << ATP867X_IO_PIOSPD_ACTIVE_SHIFT;
+}
+
+static int atp867x_get_recover_clocks_shifted(unsigned int clk)
+{
+	unsigned char clocks = clk;
+
+	switch (clocks) {
+	case 0:
+		clocks = 1;
+		break;
+	case 1 ... 11:
+		break;
+	case 12:
+		clocks = 0;
+		break;
+	case 13: case 14:
+		--clocks;
+		break;
+	case 15:
+		break;
+	default:
+		printk(KERN_WARNING "ATP867X: recover %dclk is invalid. "
+			"Using default 15clk.\n", clk);
+		clocks = 0;	/* 12 clk */
+		break;
+	}
+	return clocks << ATP867X_IO_PIOSPD_RECOVER_SHIFT;
+}
+
+static void atp867x_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct ata_device *peer = ata_dev_pair(adev);
+	struct atp867x_priv *dp = ap->private_data;
+	u8 speed = adev->pio_mode;
+	struct ata_timing t, p;
+	int T, UT;
+	u8 b;
+
+	T = 1000000000 / 33333;
+	UT = T / 4;
+
+	ata_timing_compute(adev, speed, &t, T, UT);
+	if (peer && peer->pio_mode) {
+		ata_timing_compute(peer, peer->pio_mode, &p, T, UT);
+		ata_timing_merge(&p, &t, &t, ATA_TIMING_8BIT);
+	}
+
+	b = ioread8(dp->dma_mode);
+	if (adev->devno & 1)
+		b = (b & ~ATP867X_IO_DMAMODE_SLAVE_MASK);
+	else
+		b = (b & ~ATP867X_IO_DMAMODE_MSTR_MASK);
+	iowrite8(b, dp->dma_mode);
+
+	b = atp867x_get_active_clocks_shifted(t.active) |
+		atp867x_get_recover_clocks_shifted(t.recover);
+	if (dp->pci66mhz)
+		b += 0x10;
+
+	if (adev->devno & 1)
+		iowrite8(b, dp->slave_piospd);
+	else
+		iowrite8(b, dp->mstr_piospd);
+
+	/*
+	 * use the same value for comand timing as for PIO timimg
+	 */
+	iowrite8(b, dp->eightb_piospd);
+}
+
+static int atp867x_cable_detect(struct ata_port *ap)
+{
+	return ATA_CBL_PATA40_SHORT;
+}
+
+static struct scsi_host_template atp867x_sht = {
+	ATA_BMDMA_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations atp867x_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+	.cable_detect		= atp867x_cable_detect,
+	.set_piomode		= atp867x_set_piomode,
+	.set_dmamode		= atp867x_set_dmamode,
+};
+
+
+#ifdef	ATP867X_DEBUG
+static void atp867x_check_res(struct pci_dev *pdev)
+{
+	int i;
+	unsigned long start, len;
+
+	/* Check the PCI resources for this channel are enabled */
+	for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
+		start = pci_resource_start(pdev, i);
+		len   = pci_resource_len(pdev, i);
+		printk(KERN_DEBUG "ATP867X: resource start:len=%lx:%lx\n",
+			start, len);
+	}
+}
+
+static void atp867x_check_ports(struct ata_port *ap, int port)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	struct atp867x_priv *dp = ap->private_data;
+
+	printk(KERN_DEBUG "ATP867X: port[%d] addresses\n"
+		"  cmd_addr	=0x%llx, 0x%llx\n"
+		"  ctl_addr	=0x%llx, 0x%llx\n"
+		"  bmdma_addr	=0x%llx, 0x%llx\n"
+		"  data_addr	=0x%llx\n"
+		"  error_addr	=0x%llx\n"
+		"  feature_addr	=0x%llx\n"
+		"  nsect_addr	=0x%llx\n"
+		"  lbal_addr	=0x%llx\n"
+		"  lbam_addr	=0x%llx\n"
+		"  lbah_addr	=0x%llx\n"
+		"  device_addr	=0x%llx\n"
+		"  status_addr	=0x%llx\n"
+		"  command_addr	=0x%llx\n"
+		"  dp->dma_mode	=0x%llx\n"
+		"  dp->mstr_piospd	=0x%llx\n"
+		"  dp->slave_piospd	=0x%llx\n"
+		"  dp->eightb_piospd	=0x%llx\n"
+		"  dp->pci66mhz		=0x%lx\n",
+		port,
+		(unsigned long long)ioaddr->cmd_addr,
+		(unsigned long long)ATP867X_IO_PORTBASE(ap, port),
+		(unsigned long long)ioaddr->ctl_addr,
+		(unsigned long long)ATP867X_IO_ALTSTATUS(ap, port),
+		(unsigned long long)ioaddr->bmdma_addr,
+		(unsigned long long)ATP867X_IO_DMABASE(ap, port),
+		(unsigned long long)ioaddr->data_addr,
+		(unsigned long long)ioaddr->error_addr,
+		(unsigned long long)ioaddr->feature_addr,
+		(unsigned long long)ioaddr->nsect_addr,
+		(unsigned long long)ioaddr->lbal_addr,
+		(unsigned long long)ioaddr->lbam_addr,
+		(unsigned long long)ioaddr->lbah_addr,
+		(unsigned long long)ioaddr->device_addr,
+		(unsigned long long)ioaddr->status_addr,
+		(unsigned long long)ioaddr->command_addr,
+		(unsigned long long)dp->dma_mode,
+		(unsigned long long)dp->mstr_piospd,
+		(unsigned long long)dp->slave_piospd,
+		(unsigned long long)dp->eightb_piospd,
+		(unsigned long)dp->pci66mhz);
+}
+#endif
+
+static int atp867x_set_priv(struct ata_port *ap)
+{
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct atp867x_priv *dp;
+	int port = ap->port_no;
+
+	dp = ap->private_data =
+		devm_kzalloc(&pdev->dev, sizeof(*dp), GFP_KERNEL);
+	if (dp == NULL)
+		return -ENOMEM;
+
+	dp->dma_mode	 = ATP867X_IO_DMAMODE(ap, port);
+	dp->mstr_piospd	 = ATP867X_IO_MSTRPIOSPD(ap, port);
+	dp->slave_piospd = ATP867X_IO_SLAVPIOSPD(ap, port);
+	dp->eightb_piospd = ATP867X_IO_8BPIOSPD(ap, port);
+
+	dp->pci66mhz =
+		ioread8(ATP867X_SYS_INFO(ap)) & ATP867X_IO_SYS_INFO_66MHZ;
+
+	return 0;
+}
+
+static void atp867x_fixup(struct ata_host *host)
+{
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct ata_port *ap = host->ports[0];
+	int i;
+	u8 v;
+
+	/*
+	 * Broken BIOS might not set latency high enough
+	 */
+	pci_read_config_byte(pdev, PCI_LATENCY_TIMER, &v);
+	if (v < 0x80) {
+		v = 0x80;
+		pci_write_config_byte(pdev, PCI_LATENCY_TIMER, v);
+		printk(KERN_DEBUG "ATP867X: set latency timer of device %s"
+			" to %d\n", pci_name(pdev), v);
+	}
+
+	/*
+	 * init 8bit io ports speed(0aaarrrr) to 43h and
+	 * init udma modes of master/slave to 0/0(11h)
+	 */
+	for (i = 0; i < ATP867X_NUM_PORTS; i++)
+		iowrite16(ATP867X_IO_PORTSPD_VAL, ATP867X_IO_PORTSPD(ap, i));
+
+	/*
+	 * init PreREAD counts
+	 */
+	for (i = 0; i < ATP867X_NUM_PORTS; i++)
+		iowrite16(ATP867X_PREREAD_VAL, ATP867X_IO_PREREAD(ap, i));
+
+	v = ioread8(ATP867X_IOBASE(ap) + 0x28);
+	v &= 0xcf;	/* Enable INTA#: bit4=0 means enable */
+	v |= 0xc0;	/* Enable PCI burst, MRM & not immediate interrupts */
+	iowrite8(v, ATP867X_IOBASE(ap) + 0x28);
+
+	/*
+	 * Turn off the over clocked udma5 mode, only for Rev-B
+	 */
+	v = ioread8(ATP867X_SYS_INFO(ap));
+	v &= ATP867X_IO_SYS_MASK_RESERVED;
+	if (pdev->device == PCI_DEVICE_ID_ARTOP_ATP867B)
+		v |= ATP867X_IO_SYS_INFO_SLOW_UDMA5;
+	iowrite8(v, ATP867X_SYS_INFO(ap));
+}
+
+static int atp867x_ata_pci_sff_init_host(struct ata_host *host)
+{
+	struct device *gdev = host->dev;
+	struct pci_dev *pdev = to_pci_dev(gdev);
+	unsigned int mask = 0;
+	int i, rc;
+
+	/*
+	 * do not map rombase
+	 */
+	rc = pcim_iomap_regions(pdev, 1 << ATP867X_BAR_IOBASE, DRV_NAME);
+	if (rc == -EBUSY)
+		pcim_pin_device(pdev);
+	if (rc)
+		return rc;
+	host->iomap = pcim_iomap_table(pdev);
+
+#ifdef	ATP867X_DEBUG
+	atp867x_check_res(pdev);
+
+	for (i = 0; i < PCI_ROM_RESOURCE; i++)
+		printk(KERN_DEBUG "ATP867X: iomap[%d]=0x%llx\n", i,
+			(unsigned long long)(host->iomap[i]));
+#endif
+
+	/*
+	 * request, iomap BARs and init port addresses accordingly
+	 */
+	for (i = 0; i < host->n_ports; i++) {
+		struct ata_port *ap = host->ports[i];
+		struct ata_ioports *ioaddr = &ap->ioaddr;
+
+		ioaddr->cmd_addr = ATP867X_IO_PORTBASE(ap, i);
+		ioaddr->ctl_addr = ioaddr->altstatus_addr
+				 = ATP867X_IO_ALTSTATUS(ap, i);
+		ioaddr->bmdma_addr = ATP867X_IO_DMABASE(ap, i);
+
+		ata_sff_std_ports(ioaddr);
+		rc = atp867x_set_priv(ap);
+		if (rc)
+			return rc;
+
+#ifdef	ATP867X_DEBUG
+		atp867x_check_ports(ap, i);
+#endif
+		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx",
+			(unsigned long)ioaddr->cmd_addr,
+			(unsigned long)ioaddr->ctl_addr);
+		ata_port_desc(ap, "bmdma 0x%lx",
+			(unsigned long)ioaddr->bmdma_addr);
+
+		mask |= 1 << i;
+	}
+
+	if (!mask) {
+		dev_printk(KERN_ERR, gdev, "no available native port\n");
+		return -ENODEV;
+	}
+
+	atp867x_fixup(host);
+
+	rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
+	if (rc)
+		return rc;
+
+	rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
+	return rc;
+}
+
+static int atp867x_init_one(struct pci_dev *pdev,
+	const struct pci_device_id *id)
+{
+	static int printed_version;
+	static const struct ata_port_info info_867x = {
+		.flags		= ATA_FLAG_SLAVE_POSS,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA6,
+		.port_ops	= &atp867x_ops,
+	};
+
+	struct ata_host *host;
+	const struct ata_port_info *ppi[] = { &info_867x, NULL };
+	int rc;
+
+	if (!printed_version++)
+		dev_printk(KERN_INFO, &pdev->dev, "version " DRV_VERSION "\n");
+
+	rc = pcim_enable_device(pdev);
+	if (rc)
+		return rc;
+
+	printk(KERN_INFO "ATP867X: ATP867 ATA UDMA133 controller (rev %02X)",
+		pdev->device);
+
+	host = ata_host_alloc_pinfo(&pdev->dev, ppi, ATP867X_NUM_PORTS);
+	if (!host) {
+		dev_printk(KERN_ERR, &pdev->dev,
+			"failed to allocate ATA host\n");
+		rc = -ENOMEM;
+		goto err_out;
+	}
+
+	rc = atp867x_ata_pci_sff_init_host(host);
+	if (rc) {
+		dev_printk(KERN_ERR, &pdev->dev, "failed to init host\n");
+		goto err_out;
+	}
+
+	pci_set_master(pdev);
+
+	rc = ata_host_activate(host, pdev->irq, ata_sff_interrupt,
+				IRQF_SHARED, &atp867x_sht);
+	if (rc)
+		dev_printk(KERN_ERR, &pdev->dev, "failed to activate host\n");
+
+err_out:
+	return rc;
+}
+
+static struct pci_device_id atp867x_pci_tbl[] = {
+	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867A),	0 },
+	{ PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP867B),	0 },
+	{ },
+};
+
+static struct pci_driver atp867x_driver = {
+	.name 		= DRV_NAME,
+	.id_table 	= atp867x_pci_tbl,
+	.probe 		= atp867x_init_one,
+	.remove		= ata_pci_remove_one,
+};
+
+static int __init atp867x_init(void)
+{
+	return pci_register_driver(&atp867x_driver);
+}
+
+static void __exit atp867x_exit(void)
+{
+	pci_unregister_driver(&atp867x_driver);
+}
+
+MODULE_AUTHOR("John(Jung-Ik) Lee, Google Inc.");
+MODULE_DESCRIPTION("low level driver for Artop/Acard 867x ATA controller");
+MODULE_LICENSE("GPL");
+MODULE_DEVICE_TABLE(pci, atp867x_pci_tbl);
+MODULE_VERSION(DRV_VERSION);
+
+module_init(atp867x_init);
+module_exit(atp867x_exit);
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index b1fd7d6..07d8d00 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -56,6 +56,7 @@ enum {
 	/* host register offsets (from host->iomap[PDC_MMIO_BAR]) */
 	PDC_INT_SEQMASK		= 0x40,	/* Mask of asserted SEQ INTs */
 	PDC_FLASH_CTL		= 0x44, /* Flash control register */
+	PDC_PCI_CTL		= 0x48, /* PCI control/status reg */
 	PDC_SATA_PLUG_CSR	= 0x6C, /* SATA Plug control/status reg */
 	PDC2_SATA_PLUG_CSR	= 0x60, /* SATAII Plug control/status reg */
 	PDC_TBG_MODE		= 0x41C, /* TBG mode (not SATAII) */
@@ -75,7 +76,17 @@ enum {
 	PDC_CTLSTAT		= 0x60,	/* IDE control and status (per port) */
 
 	/* per-port SATA register offsets (from ap->ioaddr.scr_addr) */
+	PDC_SATA_ERROR		= 0x04,
 	PDC_PHYMODE4		= 0x14,
+	PDC_LINK_LAYER_ERRORS	= 0x6C,
+	PDC_FPDMA_CTLSTAT	= 0xD8,
+	PDC_INTERNAL_DEBUG_1	= 0xF8,	/* also used for PATA */
+	PDC_INTERNAL_DEBUG_2	= 0xFC,	/* also used for PATA */
+
+	/* PDC_FPDMA_CTLSTAT bit definitions */
+	PDC_FPDMA_CTLSTAT_RESET			= 1 << 3,
+	PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG	= 1 << 10,
+	PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG	= 1 << 11,
 
 	/* PDC_GLOBAL_CTL bit definitions */
 	PDC_PH_ERR		= (1 <<  8), /* PCI error while loading packet */
@@ -195,9 +206,12 @@ static struct ata_port_operations pdc_sata_ops = {
 	.hardreset		= pdc_sata_hardreset,
 };
 
-/* First-generation chips need a more restrictive ->check_atapi_dma op */
+/* First-generation chips need a more restrictive ->check_atapi_dma op,
+   and ->freeze/thaw that ignore the hotplug controls. */
 static struct ata_port_operations pdc_old_sata_ops = {
 	.inherits		= &pdc_sata_ops,
+	.freeze			= pdc_freeze,
+	.thaw			= pdc_thaw,
 	.check_atapi_dma	= pdc_old_sata_check_atapi_dma,
 };
 
@@ -356,12 +370,76 @@ static int pdc_sata_port_start(struct ata_port *ap)
 	return 0;
 }
 
+static void pdc_fpdma_clear_interrupt_flag(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+	u32 tmp;
+
+	tmp = readl(sata_mmio + PDC_FPDMA_CTLSTAT);
+	tmp |= PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG;
+	tmp |= PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG;
+
+	/* It's not allowed to write to the entire FPDMA_CTLSTAT register
+	   when NCQ is running. So do a byte-sized write to bits 10 and 11. */
+	writeb(tmp >> 8, sata_mmio + PDC_FPDMA_CTLSTAT + 1);
+	readb(sata_mmio + PDC_FPDMA_CTLSTAT + 1); /* flush */
+}
+
+static void pdc_fpdma_reset(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+	u8 tmp;
+
+	tmp = (u8)readl(sata_mmio + PDC_FPDMA_CTLSTAT);
+	tmp &= 0x7F;
+	tmp |= PDC_FPDMA_CTLSTAT_RESET;
+	writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT);
+	readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */
+	udelay(100);
+	tmp &= ~PDC_FPDMA_CTLSTAT_RESET;
+	writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT);
+	readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */
+
+	pdc_fpdma_clear_interrupt_flag(ap);
+}
+
+static void pdc_not_at_command_packet_phase(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+	unsigned int i;
+	u32 tmp;
+
+	/* check not at ASIC packet command phase */
+	for (i = 0; i < 100; ++i) {
+		writel(0, sata_mmio + PDC_INTERNAL_DEBUG_1);
+		tmp = readl(sata_mmio + PDC_INTERNAL_DEBUG_2);
+		if ((tmp & 0xF) != 1)
+			break;
+		udelay(100);
+	}
+}
+
+static void pdc_clear_internal_debug_record_error_register(struct ata_port *ap)
+{
+	void __iomem *sata_mmio = ap->ioaddr.scr_addr;
+
+	writel(0xffffffff, sata_mmio + PDC_SATA_ERROR);
+	writel(0xffff0000, sata_mmio + PDC_LINK_LAYER_ERRORS);
+}
+
 static void pdc_reset_port(struct ata_port *ap)
 {
 	void __iomem *ata_ctlstat_mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
 	unsigned int i;
 	u32 tmp;
 
+	if (ap->flags & PDC_FLAG_GEN_II)
+		pdc_not_at_command_packet_phase(ap);
+
+	tmp = readl(ata_ctlstat_mmio);
+	tmp |= PDC_RESET;
+	writel(tmp, ata_ctlstat_mmio);
+
 	for (i = 11; i > 0; i--) {
 		tmp = readl(ata_ctlstat_mmio);
 		if (tmp & PDC_RESET)
@@ -376,6 +454,11 @@ static void pdc_reset_port(struct ata_port *ap)
 	tmp &= ~PDC_RESET;
 	writel(tmp, ata_ctlstat_mmio);
 	readl(ata_ctlstat_mmio);	/* flush */
+
+	if (sata_scr_valid(&ap->link) && (ap->flags & PDC_FLAG_GEN_II)) {
+		pdc_fpdma_reset(ap);
+		pdc_clear_internal_debug_record_error_register(ap);
+	}
 }
 
 static int pdc_pata_cable_detect(struct ata_port *ap)
@@ -626,11 +709,6 @@ static unsigned int pdc_sata_ata_port_to_ata_no(const struct ata_port *ap)
 	return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
 }
 
-static unsigned int pdc_sata_hotplug_offset(const struct ata_port *ap)
-{
-	return (ap->flags & PDC_FLAG_GEN_II) ? PDC2_SATA_PLUG_CSR : PDC_SATA_PLUG_CSR;
-}
-
 static void pdc_freeze(struct ata_port *ap)
 {
 	void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
@@ -647,7 +725,7 @@ static void pdc_sata_freeze(struct ata_port *ap)
 {
 	struct ata_host *host = ap->host;
 	void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
-	unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+	unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR;
 	unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
 	u32 hotplug_status;
 
@@ -685,7 +763,7 @@ static void pdc_sata_thaw(struct ata_port *ap)
 {
 	struct ata_host *host = ap->host;
 	void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
-	unsigned int hotplug_offset = pdc_sata_hotplug_offset(ap);
+	unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR;
 	unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
 	u32 hotplug_status;
 
@@ -708,11 +786,50 @@ static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
 	return ata_sff_softreset(link, class, deadline);
 }
 
+static unsigned int pdc_ata_port_to_ata_no(const struct ata_port *ap)
+{
+	void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
+	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
+
+	/* ata_mmio == host_mmio + 0x200 + ata_no * 0x80 */
+	return (ata_mmio - host_mmio - 0x200) / 0x80;
+}
+
+static void pdc_hard_reset_port(struct ata_port *ap)
+{
+	void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
+	void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1;
+	unsigned int ata_no = pdc_ata_port_to_ata_no(ap);
+	u8 tmp;
+
+	spin_lock(&ap->host->lock);
+
+	tmp = readb(pcictl_b1_mmio);
+	tmp &= ~(0x10 << ata_no);
+	writeb(tmp, pcictl_b1_mmio);
+	readb(pcictl_b1_mmio); /* flush */
+	udelay(100);
+	tmp |= (0x10 << ata_no);
+	writeb(tmp, pcictl_b1_mmio);
+	readb(pcictl_b1_mmio); /* flush */
+
+	spin_unlock(&ap->host->lock);
+}
+
 static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
 			      unsigned long deadline)
 {
+	if (link->ap->flags & PDC_FLAG_GEN_II)
+		pdc_not_at_command_packet_phase(link->ap);
+	/* hotplug IRQs should have been masked by pdc_sata_freeze() */
+	pdc_hard_reset_port(link->ap);
 	pdc_reset_port(link->ap);
-	return sata_sff_hardreset(link, class, deadline);
+
+	/* sata_promise can't reliably acquire the first D2H Reg FIS
+	 * after hardreset.  Do non-waiting hardreset and request
+	 * follow-up SRST.
+	 */
+	return sata_std_hardreset(link, class, deadline);
 }
 
 static void pdc_error_handler(struct ata_port *ap)
@@ -832,14 +949,14 @@ static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
 	spin_lock(&host->lock);
 
 	/* read and clear hotplug flags for all ports */
-	if (host->ports[0]->flags & PDC_FLAG_GEN_II)
+	if (host->ports[0]->flags & PDC_FLAG_GEN_II) {
 		hotplug_offset = PDC2_SATA_PLUG_CSR;
-	else
-		hotplug_offset = PDC_SATA_PLUG_CSR;
-	hotplug_status = readl(host_mmio + hotplug_offset);
-	if (hotplug_status & 0xff)
-		writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
-	hotplug_status &= 0xff;	/* clear uninteresting bits */
+		hotplug_status = readl(host_mmio + hotplug_offset);
+		if (hotplug_status & 0xff)
+			writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
+		hotplug_status &= 0xff;	/* clear uninteresting bits */
+	} else
+		hotplug_status = 0;
 
 	/* reading should also clear interrupts */
 	mask = readl(host_mmio + PDC_INT_SEQMASK);
@@ -1034,9 +1151,11 @@ static void pdc_host_init(struct ata_host *host)
 	tmp = readl(host_mmio + hotplug_offset);
 	writel(tmp | 0xff, host_mmio + hotplug_offset);
 
-	/* unmask plug/unplug ints */
 	tmp = readl(host_mmio + hotplug_offset);
-	writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
+	if (is_gen2)	/* unmask plug/unplug ints */
+		writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
+	else		/* mask plug/unplug ints */
+		writel(tmp | 0xff0000, host_mmio + hotplug_offset);
 
 	/* don't initialise TBG or SLEW on 2nd generation chips */
 	if (is_gen2)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 8975add..3b6b788 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1529,6 +1529,8 @@
 #define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
 #define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
 #define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
+#define PCI_DEVICE_ID_ARTOP_ATP867A	0x000A
+#define PCI_DEVICE_ID_ARTOP_ATP867B	0x000B
 #define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
 #define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
 #define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-06-23  6:06 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-06-23  6:06 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/Kconfig       |    8 +
 drivers/ata/Makefile      |    1 +
 drivers/ata/libata-core.c |   25 ++--
 drivers/ata/pata_at91.c   |  361 +++++++++++++++++++++++++++++++++++++++++++++
 drivers/ata/sata_fsl.c    |   35 +++++
 5 files changed, 420 insertions(+), 10 deletions(-)
 create mode 100644 drivers/ata/pata_at91.c

Dave Liu (1):
      sata_fsl: Add power mgmt support

Evgeni Golov (1):
      [libata] beautify module parameters

Sergey Matyukevich (1):
      [libata] PATA driver for CF interface on AT91SAM9260 SoC

Tejun Heo (1):
      libata: don't set IORDY for reset

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 2aa1908..b17c57f 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -679,6 +679,14 @@ config PATA_PLATFORM
 
 	  If unsure, say N.
 
+config PATA_AT91
+	tristate "PATA support for AT91SAM9260"
+	depends on ARM && ARCH_AT91
+	help
+	  This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
+
+	  If unsure, say N.
+
 config PATA_OF_PLATFORM
 	tristate "OpenFirmware platform device PATA support"
 	depends on PATA_PLATFORM && PPC_OF
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 1558059..38906f9 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -72,6 +72,7 @@ obj-$(CONFIG_PATA_SCH)		+= pata_sch.o
 obj-$(CONFIG_PATA_BF54X)	+= pata_bf54x.o
 obj-$(CONFIG_PATA_OCTEON_CF)	+= pata_octeon_cf.o
 obj-$(CONFIG_PATA_PLATFORM)	+= pata_platform.o
+obj-$(CONFIG_PATA_AT91)	+= pata_at91.o
 obj-$(CONFIG_PATA_OF_PLATFORM)	+= pata_of_platform.o
 obj-$(CONFIG_PATA_ICSIDE)	+= pata_icside.o
 # Should be last but two libata driver
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index ca4d208..045a486 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -125,19 +125,19 @@ MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link spe
 
 static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
-MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on [default])");
 
 static int atapi_dmadir = 0;
 module_param(atapi_dmadir, int, 0444);
-MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_dmadir, "Enable ATAPI DMADIR bridge support (0=off [default], 1=on)");
 
 int atapi_passthru16 = 1;
 module_param(atapi_passthru16, int, 0444);
-MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices; on by default (0=off, 1=on)");
+MODULE_PARM_DESC(atapi_passthru16, "Enable ATA_16 passthru for ATAPI devices (0=off, 1=on [default])");
 
 int libata_fua = 0;
 module_param_named(fua, libata_fua, int, 0444);
-MODULE_PARM_DESC(fua, "FUA support (0=off, 1=on)");
+MODULE_PARM_DESC(fua, "FUA support (0=off [default], 1=on)");
 
 static int ata_ignore_hpa;
 module_param_named(ignore_hpa, ata_ignore_hpa, int, 0644);
@@ -153,11 +153,11 @@ MODULE_PARM_DESC(ata_probe_timeout, "Set ATA probing timeout (seconds)");
 
 int libata_noacpi = 0;
 module_param_named(noacpi, libata_noacpi, int, 0444);
-MODULE_PARM_DESC(noacpi, "Disables the use of ACPI in probe/suspend/resume when set");
+MODULE_PARM_DESC(noacpi, "Disable the use of ACPI in probe/suspend/resume (0=off [default], 1=on)");
 
 int libata_allow_tpm = 0;
 module_param_named(allow_tpm, libata_allow_tpm, int, 0444);
-MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands");
+MODULE_PARM_DESC(allow_tpm, "Permit the use of TPM commands (0=off [default], 1=on)");
 
 MODULE_AUTHOR("Jeff Garzik");
 MODULE_DESCRIPTION("Library module for ATA devices");
@@ -1993,11 +1993,17 @@ unsigned int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
  *	Check if the current speed of the device requires IORDY. Used
  *	by various controllers for chip configuration.
  */
-
 unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 {
-	/* Controller doesn't support  IORDY. Probably a pointless check
-	   as the caller should know this */
+	/* Don't set IORDY if we're preparing for reset.  IORDY may
+	 * lead to controller lock up on certain controllers if the
+	 * port is not occupied.  See bko#11703 for details.
+	 */
+	if (adev->link->ap->pflags & ATA_PFLAG_RESETTING)
+		return 0;
+	/* Controller doesn't support IORDY.  Probably a pointless
+	 * check as the caller should know this.
+	 */
 	if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
 		return 0;
 	/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6.  */
@@ -2020,7 +2026,6 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
  *	Compute the highest mode possible if we are not using iordy. Return
  *	-1 if no iordy mode is available.
  */
-
 static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 {
 	/* If we have no drive specific rule, then PIO 2 is non IORDY */
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
new file mode 100644
index 0000000..4b27617
--- /dev/null
+++ b/drivers/ata/pata_at91.c
@@ -0,0 +1,361 @@
+/*
+ * PATA driver for AT91SAM9260 Static Memory Controller
+ * with CompactFlash interface in True IDE mode
+ *
+ * Copyright (C) 2009 Matyukevich Sergey
+ *
+ * Based on:
+ *      * generic platform driver by Paul Mundt: drivers/ata/pata_platform.c
+ *      * pata_at32 driver by Kristoffer Nyborg Gregertsen
+ *      * at91_ide driver by Stanislaw Gruszka
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/blkdev.h>
+#include <scsi/scsi_host.h>
+#include <linux/ata.h>
+#include <linux/clk.h>
+#include <linux/libata.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+
+#include <mach/at91sam9260_matrix.h>
+#include <mach/at91sam9_smc.h>
+#include <mach/at91sam9260.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+
+
+#define DRV_NAME "pata_at91"
+#define DRV_VERSION "0.1"
+
+#define CF_IDE_OFFSET	    0x00c00000
+#define CF_ALT_IDE_OFFSET   0x00e00000
+#define CF_IDE_RES_SIZE     0x08
+
+struct at91_ide_info {
+	unsigned long mode;
+	unsigned int cs;
+
+	void __iomem *ide_addr;
+	void __iomem *alt_addr;
+};
+
+const struct ata_timing initial_timing =
+	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
+
+static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+{
+	unsigned long mul;
+
+    /*
+     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+     *     x * (f / 1_000_000_000) =
+     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
+     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+     */
+
+    mul = (mck_hz / 10000) << 16;
+    mul /= 100000;
+
+    return (ns * mul + 65536) >> 16;    /* rounding */
+}
+
+static void set_smc_mode(struct at91_ide_info *info)
+{
+    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+    return;
+}
+
+static void set_smc_timing(struct device *dev,
+		struct at91_ide_info *info, const struct ata_timing *ata)
+{
+	int read_cycle, write_cycle, active, recover;
+	int nrd_setup, nrd_pulse, nrd_recover;
+	int nwe_setup, nwe_pulse;
+
+	int ncs_write_setup, ncs_write_pulse;
+	int ncs_read_setup, ncs_read_pulse;
+
+	unsigned int mck_hz;
+	struct clk *mck;
+
+	read_cycle  = ata->cyc8b;
+	nrd_setup   = ata->setup;
+	nrd_pulse   = ata->act8b;
+	nrd_recover = ata->rec8b;
+
+	mck = clk_get(NULL, "mck");
+	BUG_ON(IS_ERR(mck));
+	mck_hz = clk_get_rate(mck);
+
+	read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
+	nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
+	nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
+	nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
+
+	clk_put(mck);
+
+	active  = nrd_setup + nrd_pulse;
+	recover = read_cycle - active;
+
+	/* Need at least two cycles recovery */
+	if (recover < 2)
+		read_cycle = active + 2;
+
+	/* (CS0, CS1, DIR, OE) <= (CFCE1, CFCE2, CFRNW, NCSX) timings */
+	ncs_read_setup = 1;
+	ncs_read_pulse = read_cycle - 2;
+
+	/* Write timings same as read timings */
+	write_cycle = read_cycle;
+	nwe_setup = nrd_setup;
+	nwe_pulse = nrd_pulse;
+	ncs_write_setup = ncs_read_setup;
+	ncs_write_pulse = ncs_read_pulse;
+
+	dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+			nrd_setup, nrd_pulse, read_cycle);
+	dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+			nwe_setup, nwe_pulse, write_cycle);
+	dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+			ncs_read_setup, ncs_read_pulse);
+	dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+			ncs_write_setup, ncs_write_pulse);
+
+	at91_sys_write(AT91_SMC_SETUP(info->cs),
+			AT91_SMC_NWESETUP_(nwe_setup) |
+			AT91_SMC_NRDSETUP_(nrd_setup) |
+			AT91_SMC_NCS_WRSETUP_(ncs_write_setup) |
+			AT91_SMC_NCS_RDSETUP_(ncs_read_setup));
+
+	at91_sys_write(AT91_SMC_PULSE(info->cs),
+			AT91_SMC_NWEPULSE_(nwe_pulse) |
+			AT91_SMC_NRDPULSE_(nrd_pulse) |
+			AT91_SMC_NCS_WRPULSE_(ncs_write_pulse) |
+			AT91_SMC_NCS_RDPULSE_(ncs_read_pulse));
+
+	at91_sys_write(AT91_SMC_CYCLE(info->cs),
+			AT91_SMC_NWECYCLE_(write_cycle) |
+			AT91_SMC_NRDCYCLE_(read_cycle));
+
+	return;
+}
+
+static void pata_at91_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct at91_ide_info *info = ap->host->private_data;
+	struct ata_timing timing;
+	int ret;
+
+	/* Compute ATA timing and set it to SMC */
+	ret = ata_timing_compute(adev, adev->pio_mode, &timing, 1000, 0);
+	if (ret) {
+		dev_warn(ap->dev, "Failed to compute ATA timing %d, \
+				set PIO_0 timing\n", ret);
+		set_smc_timing(ap->dev, info, &initial_timing);
+	} else {
+		set_smc_timing(ap->dev, info, &timing);
+	}
+
+	/* Setup SMC mode */
+	set_smc_mode(info);
+
+	return;
+}
+
+static unsigned int pata_at91_data_xfer_noirq(struct ata_device *dev,
+		unsigned char *buf, unsigned int buflen, int rw)
+{
+	struct at91_ide_info *info = dev->link->ap->host->private_data;
+	unsigned int consumed;
+	unsigned long flags;
+	unsigned int mode;
+
+	local_irq_save(flags);
+	mode = at91_sys_read(AT91_SMC_MODE(info->cs));
+
+	/* set 16bit mode before writing data */
+	at91_sys_write(AT91_SMC_MODE(info->cs),
+			(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_16);
+
+	consumed = ata_sff_data_xfer(dev, buf, buflen, rw);
+
+	/* restore 8bit mode after data is written */
+	at91_sys_write(AT91_SMC_MODE(info->cs),
+			(mode & ~AT91_SMC_DBW) | AT91_SMC_DBW_8);
+
+	local_irq_restore(flags);
+	return consumed;
+}
+
+static struct scsi_host_template pata_at91_sht = {
+	ATA_PIO_SHT(DRV_NAME),
+};
+
+static struct ata_port_operations pata_at91_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+
+	.sff_data_xfer	= pata_at91_data_xfer_noirq,
+	.set_piomode	= pata_at91_set_piomode,
+	.cable_detect	= ata_cable_40wire,
+	.port_start	= ATA_OP_NULL,
+};
+
+static int __devinit pata_at91_probe(struct platform_device *pdev)
+{
+	struct at91_cf_data *board = pdev->dev.platform_data;
+	struct device *dev = &pdev->dev;
+	struct at91_ide_info *info;
+	struct resource *mem_res;
+	struct ata_host *host;
+	struct ata_port *ap;
+	int irq_flags = 0;
+	int irq = 0;
+	int ret;
+
+	/*  get platform resources: IO/CTL memories and irq/rst pins */
+
+	if (pdev->num_resources != 1) {
+		dev_err(&pdev->dev, "invalid number of resources\n");
+		return -EINVAL;
+	}
+
+	mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+	if (!mem_res) {
+		dev_err(dev, "failed to get mem resource\n");
+		return -EINVAL;
+	}
+
+	irq = board->irq_pin;
+
+	/* init ata host */
+
+	host = ata_host_alloc(dev, 1);
+
+	if (!host)
+		return -ENOMEM;
+
+	ap = host->ports[0];
+	ap->ops = &pata_at91_port_ops;
+	ap->flags |= ATA_FLAG_SLAVE_POSS;
+	ap->pio_mask = ATA_PIO4;
+
+	if (!irq) {
+		ap->flags |= ATA_FLAG_PIO_POLLING;
+		ata_port_desc(ap, "no IRQ, using PIO polling");
+	}
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+
+	if (!info) {
+		dev_err(dev, "failed to allocate memory for private data\n");
+		return -ENOMEM;
+	}
+
+	info->cs    = board->chipselect;
+	info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
+		AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
+		AT91_SMC_DBW_8 | AT91_SMC_TDF_(0);
+
+	info->ide_addr = devm_ioremap(dev,
+			mem_res->start + CF_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+	if (!info->ide_addr) {
+		dev_err(dev, "failed to map IO base\n");
+		ret = -ENOMEM;
+		goto err_ide_ioremap;
+	}
+
+	info->alt_addr = devm_ioremap(dev,
+			mem_res->start + CF_ALT_IDE_OFFSET, CF_IDE_RES_SIZE);
+
+	if (!info->alt_addr) {
+		dev_err(dev, "failed to map CTL base\n");
+		ret = -ENOMEM;
+		goto err_alt_ioremap;
+	}
+
+	ap->ioaddr.cmd_addr = info->ide_addr;
+	ap->ioaddr.ctl_addr = info->alt_addr + 0x06;
+	ap->ioaddr.altstatus_addr = ap->ioaddr.ctl_addr;
+
+	ata_sff_std_ports(&ap->ioaddr);
+
+	ata_port_desc(ap, "mmio cmd 0x%llx ctl 0x%llx",
+			(unsigned long long)mem_res->start + CF_IDE_OFFSET,
+			(unsigned long long)mem_res->start + CF_ALT_IDE_OFFSET);
+
+	host->private_data = info;
+
+	return ata_host_activate(host, irq ? gpio_to_irq(irq) : 0,
+			irq ? ata_sff_interrupt : NULL,
+			irq_flags, &pata_at91_sht);
+
+err_alt_ioremap:
+	devm_iounmap(dev, info->ide_addr);
+
+err_ide_ioremap:
+	kfree(info);
+
+	return ret;
+}
+
+static int __devexit pata_at91_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct at91_ide_info *info = host->private_data;
+	struct device *dev = &pdev->dev;
+
+	if (!host)
+		return 0;
+
+	ata_host_detach(host);
+
+	if (!info)
+		return 0;
+
+	devm_iounmap(dev, info->ide_addr);
+	devm_iounmap(dev, info->alt_addr);
+
+	kfree(info);
+	return 0;
+}
+
+static struct platform_driver pata_at91_driver = {
+	.probe		= pata_at91_probe,
+	.remove		= __devexit_p(pata_at91_remove),
+	.driver 	= {
+		.name		= DRV_NAME,
+		.owner		= THIS_MODULE,
+	},
+};
+
+static int __init pata_at91_init(void)
+{
+	return platform_driver_register(&pata_at91_driver);
+}
+
+static void __exit pata_at91_exit(void)
+{
+	platform_driver_unregister(&pata_at91_driver);
+}
+
+
+module_init(pata_at91_init);
+module_exit(pata_at91_exit);
+
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Driver for CF in True IDE mode on AT91SAM9260 SoC");
+MODULE_AUTHOR("Matyukevich Sergey");
+MODULE_VERSION(DRV_VERSION);
+
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 36b8629..94eaa43 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1378,6 +1378,37 @@ static int sata_fsl_remove(struct of_device *ofdev)
 	return 0;
 }
 
+#ifdef CONFIG_PM
+static int sata_fsl_suspend(struct of_device *op, pm_message_t state)
+{
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+	return ata_host_suspend(host, state);
+}
+
+static int sata_fsl_resume(struct of_device *op)
+{
+	struct ata_host *host = dev_get_drvdata(&op->dev);
+	struct sata_fsl_host_priv *host_priv = host->private_data;
+	int ret;
+	void __iomem *hcr_base = host_priv->hcr_base;
+	struct ata_port *ap = host->ports[0];
+	struct sata_fsl_port_priv *pp = ap->private_data;
+
+	ret = sata_fsl_init_controller(host);
+	if (ret) {
+		dev_printk(KERN_ERR, &op->dev,
+			"Error initialize hardware\n");
+		return ret;
+	}
+
+	/* Recovery the CHBA register in host controller cmd register set */
+	iowrite32(pp->cmdslot_paddr & 0xffffffff, hcr_base + CHBA);
+
+	ata_host_resume(host);
+	return 0;
+}
+#endif
+
 static struct of_device_id fsl_sata_match[] = {
 	{
 		.compatible = "fsl,pq-sata",
@@ -1392,6 +1423,10 @@ static struct of_platform_driver fsl_sata_driver = {
 	.match_table	= fsl_sata_match,
 	.probe		= sata_fsl_probe,
 	.remove		= sata_fsl_remove,
+#ifdef CONFIG_PM
+	.suspend	= sata_fsl_suspend,
+	.resume		= sata_fsl_resume,
+#endif
 };
 
 static int __init sata_fsl_init(void)

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-04-07  1:42 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-04-07  1:42 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: LKML, linux-ide, axboe


Notables:

- sata_mv fixes

- add definitions for TRIM infrastructure to linux/ata.h 
  (part of "discard" support, for more SSD/flash-friendly operation)

- block/blk-settings.c: code comment speling fix from Alan

- other misc fixes


Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 block/blk-settings.c         |    2 +-
 drivers/ata/ahci.c           |   17 ++-
 drivers/ata/ata_piix.c       |    7 +
 drivers/ata/pata_octeon_cf.c |    6 +-
 drivers/ata/sata_mv.c        |  487 ++++++++++++++++++++++++------------------
 include/linux/ata.h          |   41 ++++
 6 files changed, 344 insertions(+), 216 deletions(-)

Alan Cox (1):
      pata_artop: typo

David Daney (1):
      libata: Remove some redundant casts from pata_octeon_cf.c

David Milburn (1):
      libata: ahci enclosure management bios workaround

Mark Lord (8):
      sata_mv: revert SoC irq breakage
      sata_mv: fix irq mask races
      sata_mv: replace 0x1f with ATA_PIO4 (v2)
      sata_mv: workaround errata PCI#7
      sata_mv: workaround errata SATA#26
      sata_mv: cosmetic renames
      sata_mv: workaround errata SATA#13
      sata_mv: shorten register names

Matthew Wilcox (1):
      ata: Add TRIM infrastructure

Tejun Heo (1):
      ata_piix: VGN-BX297XP wants the controller power up on suspend

diff --git a/block/blk-settings.c b/block/blk-settings.c
index 59fd05d..69c42ad 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -431,7 +431,7 @@ EXPORT_SYMBOL(blk_queue_segment_boundary);
  *
  * description:
  *    set required memory and length alignment for direct dma transactions.
- *    this is used when buiding direct io requests for the queue.
+ *    this is used when building direct io requests for the queue.
  *
  **/
 void blk_queue_dma_alignment(struct request_queue *q, int mask)
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 788bba2..6ca4bc0 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -78,6 +78,7 @@ static ssize_t ahci_led_store(struct ata_port *ap, const char *buf,
 static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 					ssize_t size);
 #define MAX_SLOTS 8
+#define MAX_RETRY 15
 
 enum {
 	AHCI_PCI_BAR		= 5,
@@ -1115,6 +1116,8 @@ static void ahci_start_port(struct ata_port *ap)
 	struct ahci_port_priv *pp = ap->private_data;
 	struct ata_link *link;
 	struct ahci_em_priv *emp;
+	ssize_t rc;
+	int i;
 
 	/* enable FIS reception */
 	ahci_start_fis_rx(ap);
@@ -1126,7 +1129,17 @@ static void ahci_start_port(struct ata_port *ap)
 	if (ap->flags & ATA_FLAG_EM) {
 		ata_for_each_link(link, ap, EDGE) {
 			emp = &pp->em_priv[link->pmp];
-			ahci_transmit_led_message(ap, emp->led_state, 4);
+
+			/* EM Transmit bit maybe busy during init */
+			for (i = 0; i < MAX_RETRY; i++) {
+				rc = ahci_transmit_led_message(ap,
+							       emp->led_state,
+							       4);
+				if (rc == -EBUSY)
+					udelay(100);
+				else
+					break;
+			}
 		}
 	}
 
@@ -1331,7 +1344,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	em_ctl = readl(mmio + HOST_EM_CTL);
 	if (em_ctl & EM_CTL_TM) {
 		spin_unlock_irqrestore(ap->lock, flags);
-		return -EINVAL;
+		return -EBUSY;
 	}
 
 	/*
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index e5cbe80..942d14a 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -1053,6 +1053,13 @@ static int piix_broken_suspend(void)
 				DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"),
 			},
 		},
+		{
+			.ident = "VGN-BX297XP",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "VGN-BX297XP"),
+			},
+		},
 
 		{ }	/* terminate list */
 	};
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index efe2c19..8d9343a 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -503,7 +503,7 @@ static void octeon_cf_dma_setup(struct ata_queued_cmd *qc)
 	struct ata_port *ap = qc->ap;
 	struct octeon_cf_port *cf_port;
 
-	cf_port = (struct octeon_cf_port *)ap->private_data;
+	cf_port = ap->private_data;
 	DPRINTK("ENTER\n");
 	/* issue r/w command */
 	qc->cursg = qc->sg;
@@ -596,7 +596,7 @@ static unsigned int octeon_cf_dma_finished(struct ata_port *ap,
 	if (ap->hsm_task_state != HSM_ST_LAST)
 		return 0;
 
-	cf_port = (struct octeon_cf_port *)ap->private_data;
+	cf_port = ap->private_data;
 
 	dma_cfg.u64 = cvmx_read_csr(CVMX_MIO_BOOT_DMA_CFGX(ocd->dma_engine));
 	if (dma_cfg.s.size != 0xfffff) {
@@ -657,7 +657,7 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 			continue;
 
 		ocd = ap->dev->platform_data;
-		cf_port = (struct octeon_cf_port *)ap->private_data;
+		cf_port = ap->private_data;
 		dma_int.u64 =
 			cvmx_read_csr(CVMX_MIO_BOOT_DMA_INTX(ocd->dma_engine));
 		dma_cfg.u64 =
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index a377226..fffba9b 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -28,10 +28,6 @@
 /*
  * sata_mv TODO list:
  *
- * --> More errata workarounds for PCI-X.
- *
- * --> Complete a full errata audit for all chipsets to identify others.
- *
  * --> Develop a low-power-consumption strategy, and implement it.
  *
  * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds.
@@ -44,6 +40,15 @@
  *       connect two SATA ports.
  */
 
+/*
+ * 80x1-B2 errata PCI#11:
+ *
+ * Users of the 6041/6081 Rev.B2 chips (current is C0)
+ * should be careful to insert those cards only onto PCI-X bus #0,
+ * and only in device slots 0..7, not higher.  The chips may not
+ * work correctly otherwise  (note: this is a pretty rare condition).
+ */
+
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -64,7 +69,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"1.27"
+#define DRV_VERSION	"1.28"
 
 /*
  * module options
@@ -109,23 +114,23 @@ enum {
 	 * Coalescing defers the interrupt until either the IO_THRESHOLD
 	 * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
 	 */
-	MV_COAL_REG_BASE	= 0x18000,
-	MV_IRQ_COAL_CAUSE	= (MV_COAL_REG_BASE + 0x08),
+	COAL_REG_BASE		= 0x18000,
+	IRQ_COAL_CAUSE		= (COAL_REG_BASE + 0x08),
 	ALL_PORTS_COAL_IRQ	= (1 << 4),	/* all ports irq event */
 
-	MV_IRQ_COAL_IO_THRESHOLD   = (MV_COAL_REG_BASE + 0xcc),
-	MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0),
+	IRQ_COAL_IO_THRESHOLD   = (COAL_REG_BASE + 0xcc),
+	IRQ_COAL_TIME_THRESHOLD = (COAL_REG_BASE + 0xd0),
 
 	/*
 	 * Registers for the (unused here) transaction coalescing feature:
 	 */
-	MV_TRAN_COAL_CAUSE_LO	= (MV_COAL_REG_BASE + 0x88),
-	MV_TRAN_COAL_CAUSE_HI	= (MV_COAL_REG_BASE + 0x8c),
+	TRAN_COAL_CAUSE_LO	= (COAL_REG_BASE + 0x88),
+	TRAN_COAL_CAUSE_HI	= (COAL_REG_BASE + 0x8c),
 
-	MV_SATAHC0_REG_BASE	= 0x20000,
-	MV_FLASH_CTL_OFS	= 0x1046c,
-	MV_GPIO_PORT_CTL_OFS	= 0x104f0,
-	MV_RESET_CFG_OFS	= 0x180d8,
+	SATAHC0_REG_BASE	= 0x20000,
+	FLASH_CTL		= 0x1046c,
+	GPIO_PORT_CTL		= 0x104f0,
+	RESET_CFG		= 0x180d8,
 
 	MV_PCI_REG_SZ		= MV_MAJOR_REG_AREA_SZ,
 	MV_SATAHC_REG_SZ	= MV_MAJOR_REG_AREA_SZ,
@@ -180,40 +185,41 @@ enum {
 
 	/* PCI interface registers */
 
-	PCI_COMMAND_OFS		= 0xc00,
-	PCI_COMMAND_MRDTRIG	= (1 << 7),	/* PCI Master Read Trigger */
+	MV_PCI_COMMAND		= 0xc00,
+	MV_PCI_COMMAND_MWRCOM	= (1 << 4),	/* PCI Master Write Combining */
+	MV_PCI_COMMAND_MRDTRIG	= (1 << 7),	/* PCI Master Read Trigger */
 
-	PCI_MAIN_CMD_STS_OFS	= 0xd30,
+	PCI_MAIN_CMD_STS	= 0xd30,
 	STOP_PCI_MASTER		= (1 << 2),
 	PCI_MASTER_EMPTY	= (1 << 3),
 	GLOB_SFT_RST		= (1 << 4),
 
-	MV_PCI_MODE_OFS		= 0xd00,
+	MV_PCI_MODE		= 0xd00,
 	MV_PCI_MODE_MASK	= 0x30,
 
 	MV_PCI_EXP_ROM_BAR_CTL	= 0xd2c,
 	MV_PCI_DISC_TIMER	= 0xd04,
 	MV_PCI_MSI_TRIGGER	= 0xc38,
 	MV_PCI_SERR_MASK	= 0xc28,
-	MV_PCI_XBAR_TMOUT_OFS	= 0x1d04,
+	MV_PCI_XBAR_TMOUT	= 0x1d04,
 	MV_PCI_ERR_LOW_ADDRESS	= 0x1d40,
 	MV_PCI_ERR_HIGH_ADDRESS	= 0x1d44,
 	MV_PCI_ERR_ATTRIBUTE	= 0x1d48,
 	MV_PCI_ERR_COMMAND	= 0x1d50,
 
-	PCI_IRQ_CAUSE_OFS	= 0x1d58,
-	PCI_IRQ_MASK_OFS	= 0x1d5c,
+	PCI_IRQ_CAUSE		= 0x1d58,
+	PCI_IRQ_MASK		= 0x1d5c,
 	PCI_UNMASK_ALL_IRQS	= 0x7fffff,	/* bits 22-0 */
 
-	PCIE_IRQ_CAUSE_OFS	= 0x1900,
-	PCIE_IRQ_MASK_OFS	= 0x1910,
+	PCIE_IRQ_CAUSE		= 0x1900,
+	PCIE_IRQ_MASK		= 0x1910,
 	PCIE_UNMASK_ALL_IRQS	= 0x40a,	/* assorted bits */
 
 	/* Host Controller Main Interrupt Cause/Mask registers (1 per-chip) */
-	PCI_HC_MAIN_IRQ_CAUSE_OFS = 0x1d60,
-	PCI_HC_MAIN_IRQ_MASK_OFS  = 0x1d64,
-	SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
-	SOC_HC_MAIN_IRQ_MASK_OFS  = 0x20024,
+	PCI_HC_MAIN_IRQ_CAUSE	= 0x1d60,
+	PCI_HC_MAIN_IRQ_MASK	= 0x1d64,
+	SOC_HC_MAIN_IRQ_CAUSE	= 0x20020,
+	SOC_HC_MAIN_IRQ_MASK	= 0x20024,
 	ERR_IRQ			= (1 << 0),	/* shift by (2 * port #) */
 	DONE_IRQ		= (1 << 1),	/* shift by (2 * port #) */
 	HC0_IRQ_PEND		= 0x1ff,	/* bits 0-8 = HC0's ports */
@@ -234,9 +240,9 @@ enum {
 	HC_MAIN_RSVD_SOC	= (0x3fffffb << 6),     /* bits 31-9, 7-6 */
 
 	/* SATAHC registers */
-	HC_CFG_OFS		= 0,
+	HC_CFG			= 0x00,
 
-	HC_IRQ_CAUSE_OFS	= 0x14,
+	HC_IRQ_CAUSE		= 0x14,
 	DMA_IRQ			= (1 << 0),	/* shift by port # */
 	HC_COAL_IRQ		= (1 << 4),	/* IRQ coalescing */
 	DEV_IRQ			= (1 << 8),	/* shift by port # */
@@ -248,53 +254,54 @@ enum {
 	 * Coalescing defers the interrupt until either the IO_THRESHOLD
 	 * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
 	 */
-	HC_IRQ_COAL_IO_THRESHOLD_OFS	= 0x000c,
-	HC_IRQ_COAL_TIME_THRESHOLD_OFS	= 0x0010,
+	HC_IRQ_COAL_IO_THRESHOLD	= 0x000c,
+	HC_IRQ_COAL_TIME_THRESHOLD	= 0x0010,
 
-	SOC_LED_CTRL_OFS	= 0x2c,
+	SOC_LED_CTRL		= 0x2c,
 	SOC_LED_CTRL_BLINK	= (1 << 0),	/* Active LED blink */
 	SOC_LED_CTRL_ACT_PRESENCE = (1 << 2),	/* Multiplex dev presence */
 						/*  with dev activity LED */
 
 	/* Shadow block registers */
-	SHD_BLK_OFS		= 0x100,
-	SHD_CTL_AST_OFS		= 0x20,		/* ofs from SHD_BLK_OFS */
+	SHD_BLK			= 0x100,
+	SHD_CTL_AST		= 0x20,		/* ofs from SHD_BLK */
 
 	/* SATA registers */
-	SATA_STATUS_OFS		= 0x300,  /* ctrl, err regs follow status */
-	SATA_ACTIVE_OFS		= 0x350,
-	SATA_FIS_IRQ_CAUSE_OFS	= 0x364,
-	SATA_FIS_IRQ_AN		= (1 << 9),	/* async notification */
+	SATA_STATUS		= 0x300,  /* ctrl, err regs follow status */
+	SATA_ACTIVE		= 0x350,
+	FIS_IRQ_CAUSE		= 0x364,
+	FIS_IRQ_CAUSE_AN	= (1 << 9),	/* async notification */
 
-	LTMODE_OFS		= 0x30c,
+	LTMODE			= 0x30c,	/* requires read-after-write */
 	LTMODE_BIT8		= (1 << 8),	/* unknown, but necessary */
 
+	PHY_MODE2		= 0x330,
 	PHY_MODE3		= 0x310,
-	PHY_MODE4		= 0x314,
+
+	PHY_MODE4		= 0x314,	/* requires read-after-write */
 	PHY_MODE4_CFG_MASK	= 0x00000003,	/* phy internal config field */
 	PHY_MODE4_CFG_VALUE	= 0x00000001,	/* phy internal config field */
 	PHY_MODE4_RSVD_ZEROS	= 0x5de3fffa,	/* Gen2e always write zeros */
 	PHY_MODE4_RSVD_ONES	= 0x00000005,	/* Gen2e always write ones */
 
-	PHY_MODE2		= 0x330,
-	SATA_IFCTL_OFS		= 0x344,
-	SATA_TESTCTL_OFS	= 0x348,
-	SATA_IFSTAT_OFS		= 0x34c,
-	VENDOR_UNIQUE_FIS_OFS	= 0x35c,
+	SATA_IFCTL		= 0x344,
+	SATA_TESTCTL		= 0x348,
+	SATA_IFSTAT		= 0x34c,
+	VENDOR_UNIQUE_FIS	= 0x35c,
 
-	FISCFG_OFS		= 0x360,
+	FISCFG			= 0x360,
 	FISCFG_WAIT_DEV_ERR	= (1 << 8),	/* wait for host on DevErr */
 	FISCFG_SINGLE_SYNC	= (1 << 16),	/* SYNC on DMA activation */
 
 	MV5_PHY_MODE		= 0x74,
-	MV5_LTMODE_OFS		= 0x30,
-	MV5_PHY_CTL_OFS		= 0x0C,
-	SATA_INTERFACE_CFG_OFS	= 0x050,
+	MV5_LTMODE		= 0x30,
+	MV5_PHY_CTL		= 0x0C,
+	SATA_IFCFG		= 0x050,
 
 	MV_M2_PREAMP_MASK	= 0x7e0,
 
 	/* Port registers */
-	EDMA_CFG_OFS		= 0,
+	EDMA_CFG		= 0,
 	EDMA_CFG_Q_DEPTH	= 0x1f,		/* max device queue depth */
 	EDMA_CFG_NCQ		= (1 << 5),	/* for R/W FPDMA queued */
 	EDMA_CFG_NCQ_GO_ON_ERR	= (1 << 14),	/* continue on error */
@@ -303,8 +310,8 @@ enum {
 	EDMA_CFG_EDMA_FBS	= (1 << 16),	/* EDMA FIS-Based Switching */
 	EDMA_CFG_FBS		= (1 << 26),	/* FIS-Based Switching */
 
-	EDMA_ERR_IRQ_CAUSE_OFS	= 0x8,
-	EDMA_ERR_IRQ_MASK_OFS	= 0xc,
+	EDMA_ERR_IRQ_CAUSE	= 0x8,
+	EDMA_ERR_IRQ_MASK	= 0xc,
 	EDMA_ERR_D_PAR		= (1 << 0),	/* UDMA data parity err */
 	EDMA_ERR_PRD_PAR	= (1 << 1),	/* UDMA PRD parity err */
 	EDMA_ERR_DEV		= (1 << 2),	/* device error */
@@ -373,36 +380,36 @@ enum {
 				  EDMA_ERR_INTRL_PAR |
 				  EDMA_ERR_IORDY,
 
-	EDMA_REQ_Q_BASE_HI_OFS	= 0x10,
-	EDMA_REQ_Q_IN_PTR_OFS	= 0x14,		/* also contains BASE_LO */
+	EDMA_REQ_Q_BASE_HI	= 0x10,
+	EDMA_REQ_Q_IN_PTR	= 0x14,		/* also contains BASE_LO */
 
-	EDMA_REQ_Q_OUT_PTR_OFS	= 0x18,
+	EDMA_REQ_Q_OUT_PTR	= 0x18,
 	EDMA_REQ_Q_PTR_SHIFT	= 5,
 
-	EDMA_RSP_Q_BASE_HI_OFS	= 0x1c,
-	EDMA_RSP_Q_IN_PTR_OFS	= 0x20,
-	EDMA_RSP_Q_OUT_PTR_OFS	= 0x24,		/* also contains BASE_LO */
+	EDMA_RSP_Q_BASE_HI	= 0x1c,
+	EDMA_RSP_Q_IN_PTR	= 0x20,
+	EDMA_RSP_Q_OUT_PTR	= 0x24,		/* also contains BASE_LO */
 	EDMA_RSP_Q_PTR_SHIFT	= 3,
 
-	EDMA_CMD_OFS		= 0x28,		/* EDMA command register */
+	EDMA_CMD		= 0x28,		/* EDMA command register */
 	EDMA_EN			= (1 << 0),	/* enable EDMA */
 	EDMA_DS			= (1 << 1),	/* disable EDMA; self-negated */
 	EDMA_RESET		= (1 << 2),	/* reset eng/trans/link/phy */
 
-	EDMA_STATUS_OFS		= 0x30,		/* EDMA engine status */
+	EDMA_STATUS		= 0x30,		/* EDMA engine status */
 	EDMA_STATUS_CACHE_EMPTY	= (1 << 6),	/* GenIIe command cache empty */
 	EDMA_STATUS_IDLE	= (1 << 7),	/* GenIIe EDMA enabled/idle */
 
-	EDMA_IORDY_TMOUT_OFS	= 0x34,
-	EDMA_ARB_CFG_OFS	= 0x38,
+	EDMA_IORDY_TMOUT	= 0x34,
+	EDMA_ARB_CFG		= 0x38,
 
-	EDMA_HALTCOND_OFS	= 0x60,		/* GenIIe halt conditions */
-	EDMA_UNKNOWN_RSVD_OFS	= 0x6C,		/* GenIIe unknown/reserved */
+	EDMA_HALTCOND		= 0x60,		/* GenIIe halt conditions */
+	EDMA_UNKNOWN_RSVD	= 0x6C,		/* GenIIe unknown/reserved */
 
-	BMDMA_CMD_OFS		= 0x224,	/* bmdma command register */
-	BMDMA_STATUS_OFS	= 0x228,	/* bmdma status register */
-	BMDMA_PRD_LOW_OFS	= 0x22c,	/* bmdma PRD addr 31:0 */
-	BMDMA_PRD_HIGH_OFS	= 0x230,	/* bmdma PRD addr 63:32 */
+	BMDMA_CMD		= 0x224,	/* bmdma command register */
+	BMDMA_STATUS		= 0x228,	/* bmdma status register */
+	BMDMA_PRD_LOW		= 0x22c,	/* bmdma PRD addr 31:0 */
+	BMDMA_PRD_HIGH		= 0x230,	/* bmdma PRD addr 63:32 */
 
 	/* Host private flags (hp_flags) */
 	MV_HP_FLAG_MSI		= (1 << 0),
@@ -534,8 +541,8 @@ struct mv_host_priv {
 	void __iomem		*base;
 	void __iomem		*main_irq_cause_addr;
 	void __iomem		*main_irq_mask_addr;
-	u32			irq_cause_ofs;
-	u32			irq_mask_ofs;
+	u32			irq_cause_offset;
+	u32			irq_mask_offset;
 	u32			unmask_all_irqs;
 	/*
 	 * These consistent DMA memory pools give us guaranteed
@@ -694,49 +701,49 @@ static struct ata_port_operations mv_iie_ops = {
 static const struct ata_port_info mv_port_info[] = {
 	{  /* chip_504x */
 		.flags		= MV_GEN_I_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_508x */
 		.flags		= MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_5080 */
 		.flags		= MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_604x */
 		.flags		= MV_GEN_II_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_608x */
 		.flags		= MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_6042 */
 		.flags		= MV_GEN_IIE_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_7042 */
 		.flags		= MV_GEN_IIE_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_soc */
 		.flags		= MV_GEN_IIE_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
@@ -840,7 +847,7 @@ static inline unsigned int mv_hardport_from_port(unsigned int port)
 
 static inline void __iomem *mv_hc_base(void __iomem *base, unsigned int hc)
 {
-	return (base + MV_SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
+	return (base + SATAHC0_REG_BASE + (hc * MV_SATAHC_REG_SZ));
 }
 
 static inline void __iomem *mv_hc_base_from_port(void __iomem *base,
@@ -895,10 +902,10 @@ static void mv_save_cached_regs(struct ata_port *ap)
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
 
-	pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS);
-	pp->cached.ltmode = readl(port_mmio + LTMODE_OFS);
-	pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
-	pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS);
+	pp->cached.fiscfg = readl(port_mmio + FISCFG);
+	pp->cached.ltmode = readl(port_mmio + LTMODE);
+	pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND);
+	pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD);
 }
 
 /**
@@ -913,8 +920,26 @@ static void mv_save_cached_regs(struct ata_port *ap)
 static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new)
 {
 	if (new != *old) {
+		unsigned long laddr;
 		*old = new;
-		writel(new, addr);
+		/*
+		 * Workaround for 88SX60x1-B2 FEr SATA#13:
+		 * Read-after-write is needed to prevent generating 64-bit
+		 * write cycles on the PCI bus for SATA interface registers
+		 * at offsets ending in 0x4 or 0xc.
+		 *
+		 * Looks like a lot of fuss, but it avoids an unnecessary
+		 * +1 usec read-after-write delay for unaffected registers.
+		 */
+		laddr = (long)addr & 0xffff;
+		if (laddr >= 0x300 && laddr <= 0x33c) {
+			laddr &= 0x000f;
+			if (laddr == 0x4 || laddr == 0xc) {
+				writelfl(new, addr); /* read after write */
+				return;
+			}
+		}
+		writel(new, addr); /* unaffected by the errata */
 	}
 }
 
@@ -931,10 +956,10 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio,
 	index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
 
 	WARN_ON(pp->crqb_dma & 0x3ff);
-	writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS);
+	writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI);
 	writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index,
-		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
-	writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS);
+		 port_mmio + EDMA_REQ_Q_IN_PTR);
+	writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR);
 
 	/*
 	 * initialize response queue
@@ -943,10 +968,10 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio,
 	index = pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT;
 
 	WARN_ON(pp->crpb_dma & 0xff);
-	writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS);
-	writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS);
+	writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI);
+	writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR);
 	writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index,
-		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+		 port_mmio + EDMA_RSP_Q_OUT_PTR);
 }
 
 static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv)
@@ -1004,15 +1029,15 @@ static void mv_clear_and_enable_port_irqs(struct ata_port *ap,
 	u32 hc_irq_cause;
 
 	/* clear EDMA event indicators, if any */
-	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE);
 
 	/* clear pending irq events */
 	hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
-	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE);
 
 	/* clear FIS IRQ Cause */
 	if (IS_GEN_IIE(hpriv))
-		writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+		writelfl(0, port_mmio + FIS_IRQ_CAUSE);
 
 	mv_enable_port_irqs(ap, port_irqs);
 }
@@ -1048,10 +1073,10 @@ static void mv_set_irq_coalescing(struct ata_host *host,
 		 * GEN_II/GEN_IIE with dual host controllers:
 		 * one set of global thresholds for the entire chip.
 		 */
-		writel(clks,  mmio + MV_IRQ_COAL_TIME_THRESHOLD);
-		writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD);
+		writel(clks,  mmio + IRQ_COAL_TIME_THRESHOLD);
+		writel(count, mmio + IRQ_COAL_IO_THRESHOLD);
 		/* clear leftover coal IRQ bit */
-		writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE);
+		writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE);
 		if (count)
 			coal_enable = ALL_PORTS_COAL_DONE;
 		clks = count = 0; /* force clearing of regular regs below */
@@ -1061,16 +1086,16 @@ static void mv_set_irq_coalescing(struct ata_host *host,
 	 * All chips: independent thresholds for each HC on the chip.
 	 */
 	hc_mmio = mv_hc_base_from_port(mmio, 0);
-	writel(clks,  hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS);
-	writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS);
-	writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS);
+	writel(clks,  hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD);
+	writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD);
+	writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE);
 	if (count)
 		coal_enable |= PORTS_0_3_COAL_DONE;
 	if (is_dual_hc) {
 		hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC);
-		writel(clks,  hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS);
-		writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS);
-		writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS);
+		writel(clks,  hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD);
+		writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD);
+		writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE);
 		if (count)
 			coal_enable |= PORTS_4_7_COAL_DONE;
 	}
@@ -1108,7 +1133,7 @@ static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio,
 		mv_set_edma_ptrs(port_mmio, hpriv, pp);
 		mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ);
 
-		writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
+		writelfl(EDMA_EN, port_mmio + EDMA_CMD);
 		pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
 	}
 }
@@ -1128,7 +1153,7 @@ static void mv_wait_for_edma_empty_idle(struct ata_port *ap)
 	 * as a rough guess at what even more drives might require.
 	 */
 	for (i = 0; i < timeout; ++i) {
-		u32 edma_stat = readl(port_mmio + EDMA_STATUS_OFS);
+		u32 edma_stat = readl(port_mmio + EDMA_STATUS);
 		if ((edma_stat & empty_idle) == empty_idle)
 			break;
 		udelay(per_loop);
@@ -1148,11 +1173,11 @@ static int mv_stop_edma_engine(void __iomem *port_mmio)
 	int i;
 
 	/* Disable eDMA.  The disable bit auto clears. */
-	writelfl(EDMA_DS, port_mmio + EDMA_CMD_OFS);
+	writelfl(EDMA_DS, port_mmio + EDMA_CMD);
 
 	/* Wait for the chip to confirm eDMA is off. */
 	for (i = 10000; i > 0; i--) {
-		u32 reg = readl(port_mmio + EDMA_CMD_OFS);
+		u32 reg = readl(port_mmio + EDMA_CMD);
 		if (!(reg & EDMA_EN))
 			return 0;
 		udelay(10);
@@ -1262,10 +1287,10 @@ static unsigned int mv_scr_offset(unsigned int sc_reg_in)
 	case SCR_STATUS:
 	case SCR_CONTROL:
 	case SCR_ERROR:
-		ofs = SATA_STATUS_OFS + (sc_reg_in * sizeof(u32));
+		ofs = SATA_STATUS + (sc_reg_in * sizeof(u32));
 		break;
 	case SCR_ACTIVE:
-		ofs = SATA_ACTIVE_OFS;   /* active is not with the others */
+		ofs = SATA_ACTIVE;   /* active is not with the others */
 		break;
 	default:
 		ofs = 0xffffffffU;
@@ -1290,7 +1315,25 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 	unsigned int ofs = mv_scr_offset(sc_reg_in);
 
 	if (ofs != 0xffffffffU) {
-		writelfl(val, mv_ap_base(link->ap) + ofs);
+		void __iomem *addr = mv_ap_base(link->ap) + ofs;
+		if (sc_reg_in == SCR_CONTROL) {
+			/*
+			 * Workaround for 88SX60x1 FEr SATA#26:
+			 *
+			 * COMRESETs have to take care not to accidently
+			 * put the drive to sleep when writing SCR_CONTROL.
+			 * Setting bits 12..15 prevents this problem.
+			 *
+			 * So if we see an outbound COMMRESET, set those bits.
+			 * Ditto for the followup write that clears the reset.
+			 *
+			 * The proprietary driver does this for
+			 * all chip versions, and so do we.
+			 */
+			if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
+				val |= 0xf000;
+		}
+		writelfl(val, addr);
 		return 0;
 	} else
 		return -EINVAL;
@@ -1368,9 +1411,9 @@ static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs)
 	}
 
 	port_mmio = mv_ap_base(ap);
-	mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg);
-	mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode);
-	mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond);
+	mv_write_cached_reg(port_mmio + FISCFG, old_fiscfg, fiscfg);
+	mv_write_cached_reg(port_mmio + LTMODE, old_ltmode, ltmode);
+	mv_write_cached_reg(port_mmio + EDMA_HALTCOND, old_haltcond, haltcond);
 }
 
 static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
@@ -1379,13 +1422,13 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
 	u32 old, new;
 
 	/* workaround for 88SX60x1 FEr SATA#25 (part 1) */
-	old = readl(hpriv->base + MV_GPIO_PORT_CTL_OFS);
+	old = readl(hpriv->base + GPIO_PORT_CTL);
 	if (want_ncq)
 		new = old | (1 << 22);
 	else
 		new = old & ~(1 << 22);
 	if (new != old)
-		writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
+		writel(new, hpriv->base + GPIO_PORT_CTL);
 }
 
 /**
@@ -1409,7 +1452,7 @@ static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma)
 		new = *old | 1;
 	else
 		new = *old & ~1;
-	mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new);
+	mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD, old, new);
 }
 
 /*
@@ -1437,8 +1480,8 @@ static void mv_soc_led_blink_enable(struct ata_port *ap)
 		return;
 	hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN;
 	hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no);
-	led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS);
-	writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS);
+	led_ctrl = readl(hc_mmio + SOC_LED_CTRL);
+	writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL);
 }
 
 static void mv_soc_led_blink_disable(struct ata_port *ap)
@@ -1463,8 +1506,8 @@ static void mv_soc_led_blink_disable(struct ata_port *ap)
 
 	hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN;
 	hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no);
-	led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS);
-	writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS);
+	led_ctrl = readl(hc_mmio + SOC_LED_CTRL);
+	writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL);
 }
 
 static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma)
@@ -1528,7 +1571,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma)
 		pp->pp_flags |=  MV_PP_FLAG_NCQ_EN;
 	}
 
-	writelfl(cfg, port_mmio + EDMA_CFG_OFS);
+	writelfl(cfg, port_mmio + EDMA_CFG);
 }
 
 static void mv_port_free_dma_mem(struct ata_port *ap)
@@ -1575,6 +1618,7 @@ static int mv_port_start(struct ata_port *ap)
 	struct device *dev = ap->host->dev;
 	struct mv_host_priv *hpriv = ap->host->private_data;
 	struct mv_port_priv *pp;
+	unsigned long flags;
 	int tag;
 
 	pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
@@ -1610,8 +1654,12 @@ static int mv_port_start(struct ata_port *ap)
 			pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
 		}
 	}
+
+	spin_lock_irqsave(ap->lock, flags);
 	mv_save_cached_regs(ap);
 	mv_edma_cfg(ap, 0, 0);
+	spin_unlock_irqrestore(ap->lock, flags);
+
 	return 0;
 
 out_port_free_dma_mem:
@@ -1630,8 +1678,12 @@ out_port_free_dma_mem:
  */
 static void mv_port_stop(struct ata_port *ap)
 {
+	unsigned long flags;
+
+	spin_lock_irqsave(ap->lock, flags);
 	mv_stop_edma(ap);
 	mv_enable_port_irqs(ap, 0);
+	spin_unlock_irqrestore(ap->lock, flags);
 	mv_port_free_dma_mem(ap);
 }
 
@@ -1749,13 +1801,13 @@ static void mv_bmdma_setup(struct ata_queued_cmd *qc)
 	mv_fill_sg(qc);
 
 	/* clear all DMA cmd bits */
-	writel(0, port_mmio + BMDMA_CMD_OFS);
+	writel(0, port_mmio + BMDMA_CMD);
 
 	/* load PRD table addr. */
 	writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16,
-		port_mmio + BMDMA_PRD_HIGH_OFS);
+		port_mmio + BMDMA_PRD_HIGH);
 	writelfl(pp->sg_tbl_dma[qc->tag],
-		port_mmio + BMDMA_PRD_LOW_OFS);
+		port_mmio + BMDMA_PRD_LOW);
 
 	/* issue r/w command */
 	ap->ops->sff_exec_command(ap, &qc->tf);
@@ -1776,7 +1828,7 @@ static void mv_bmdma_start(struct ata_queued_cmd *qc)
 	u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START;
 
 	/* start host DMA transaction */
-	writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
+	writelfl(cmd, port_mmio + BMDMA_CMD);
 }
 
 /**
@@ -1795,9 +1847,9 @@ static void mv_bmdma_stop(struct ata_queued_cmd *qc)
 	u32 cmd;
 
 	/* clear start/stop bit */
-	cmd = readl(port_mmio + BMDMA_CMD_OFS);
+	cmd = readl(port_mmio + BMDMA_CMD);
 	cmd &= ~ATA_DMA_START;
-	writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
+	writelfl(cmd, port_mmio + BMDMA_CMD);
 
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
 	ata_sff_dma_pause(ap);
@@ -1821,7 +1873,7 @@ static u8 mv_bmdma_status(struct ata_port *ap)
 	 * Other bits are valid only if ATA_DMA_ACTIVE==0,
 	 * and the ATA_DMA_INTR bit doesn't exist.
 	 */
-	reg = readl(port_mmio + BMDMA_STATUS_OFS);
+	reg = readl(port_mmio + BMDMA_STATUS);
 	if (reg & ATA_DMA_ACTIVE)
 		status = ATA_DMA_ACTIVE;
 	else
@@ -2029,28 +2081,28 @@ static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords)
 	int i, timeout = 200, final_word = nwords - 1;
 
 	/* Initiate FIS transmission mode */
-	old_ifctl = readl(port_mmio + SATA_IFCTL_OFS);
+	old_ifctl = readl(port_mmio + SATA_IFCTL);
 	ifctl = 0x100 | (old_ifctl & 0xf);
-	writelfl(ifctl, port_mmio + SATA_IFCTL_OFS);
+	writelfl(ifctl, port_mmio + SATA_IFCTL);
 
 	/* Send all words of the FIS except for the final word */
 	for (i = 0; i < final_word; ++i)
-		writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS);
+		writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS);
 
 	/* Flag end-of-transmission, and then send the final word */
-	writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS);
-	writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS);
+	writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL);
+	writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS);
 
 	/*
 	 * Wait for FIS transmission to complete.
 	 * This typically takes just a single iteration.
 	 */
 	do {
-		ifstat = readl(port_mmio + SATA_IFSTAT_OFS);
+		ifstat = readl(port_mmio + SATA_IFSTAT);
 	} while (!(ifstat & 0x1000) && --timeout);
 
 	/* Restore original port configuration */
-	writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS);
+	writelfl(old_ifctl, port_mmio + SATA_IFCTL);
 
 	/* See if it worked */
 	if ((ifstat & 0x3000) != 0x1000) {
@@ -2148,7 +2200,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 
 		/* Write the request in pointer to kick the EDMA to life */
 		writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
-					port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+					port_mmio + EDMA_REQ_Q_IN_PTR);
 		return 0;
 
 	case ATA_PROT_PIO:
@@ -2259,7 +2311,7 @@ static unsigned int mv_get_err_pmp_map(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 
-	return readl(port_mmio + SATA_TESTCTL_OFS) >> 16;
+	return readl(port_mmio + SATA_TESTCTL) >> 16;
 }
 
 static void mv_pmp_eh_prep(struct ata_port *ap, unsigned int pmp_map)
@@ -2292,9 +2344,9 @@ static int mv_req_q_empty(struct ata_port *ap)
 	void __iomem *port_mmio = mv_ap_base(ap);
 	u32 in_ptr, out_ptr;
 
-	in_ptr  = (readl(port_mmio + EDMA_REQ_Q_IN_PTR_OFS)
+	in_ptr  = (readl(port_mmio + EDMA_REQ_Q_IN_PTR)
 			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
-	out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR_OFS)
+	out_ptr = (readl(port_mmio + EDMA_REQ_Q_OUT_PTR)
 			>> EDMA_REQ_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 	return (in_ptr == out_ptr);	/* 1 == queue_is_empty */
 }
@@ -2456,12 +2508,12 @@ static void mv_err_intr(struct ata_port *ap)
 	sata_scr_read(&ap->link, SCR_ERROR, &serr);
 	sata_scr_write_flush(&ap->link, SCR_ERROR, serr);
 
-	edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+	edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE);
 	if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
-		fis_cause = readl(port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
-		writelfl(~fis_cause, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+		fis_cause = readl(port_mmio + FIS_IRQ_CAUSE);
+		writelfl(~fis_cause, port_mmio + FIS_IRQ_CAUSE);
 	}
-	writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+	writelfl(~edma_err_cause, port_mmio + EDMA_ERR_IRQ_CAUSE);
 
 	if (edma_err_cause & EDMA_ERR_DEV) {
 		/*
@@ -2479,7 +2531,7 @@ static void mv_err_intr(struct ata_port *ap)
 
 	if (IS_GEN_IIE(hpriv) && (edma_err_cause & EDMA_ERR_TRANS_IRQ_7)) {
 		ata_ehi_push_desc(ehi, "fis_cause=%08x", fis_cause);
-		if (fis_cause & SATA_FIS_IRQ_AN) {
+		if (fis_cause & FIS_IRQ_CAUSE_AN) {
 			u32 ec = edma_err_cause &
 			       ~(EDMA_ERR_TRANS_IRQ_7 | EDMA_ERR_IRQ_TRANSIENT);
 			sata_async_notification(ap);
@@ -2581,7 +2633,7 @@ static void mv_process_crpb_response(struct ata_port *ap,
 		u16 edma_status = le16_to_cpu(response->flags);
 		/*
 		 * edma_status from a response queue entry:
-		 *   LSB is from EDMA_ERR_IRQ_CAUSE_OFS (non-NCQ only).
+		 *   LSB is from EDMA_ERR_IRQ_CAUSE (non-NCQ only).
 		 *   MSB is saved ATA status from command completion.
 		 */
 		if (!ncq_enabled) {
@@ -2613,7 +2665,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp
 	int ncq_enabled = (pp->pp_flags & MV_PP_FLAG_NCQ_EN);
 
 	/* Get the hardware queue position index */
-	in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR_OFS)
+	in_index = (readl(port_mmio + EDMA_RSP_Q_IN_PTR)
 			>> EDMA_RSP_Q_PTR_SHIFT) & MV_MAX_Q_DEPTH_MASK;
 
 	/* Process new responses from since the last time we looked */
@@ -2638,7 +2690,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp
 	if (work_done)
 		writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) |
 			 (pp->resp_idx << EDMA_RSP_Q_PTR_SHIFT),
-			 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
+			 port_mmio + EDMA_RSP_Q_OUT_PTR);
 }
 
 static void mv_port_intr(struct ata_port *ap, u32 port_cause)
@@ -2695,7 +2747,7 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
 
 	/* If asserted, clear the "all ports" IRQ coalescing bit */
 	if (main_irq_cause & ALL_PORTS_COAL_DONE)
-		writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE);
+		writel(~ALL_PORTS_COAL_IRQ, mmio + IRQ_COAL_CAUSE);
 
 	for (port = 0; port < hpriv->n_ports; port++) {
 		struct ata_port *ap = host->ports[port];
@@ -2739,7 +2791,7 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
 					ack_irqs |= (DMA_IRQ | DEV_IRQ) << p;
 			}
 			hc_mmio = mv_hc_base_from_port(mmio, port);
-			writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE_OFS);
+			writelfl(~ack_irqs, hc_mmio + HC_IRQ_CAUSE);
 			handled = 1;
 		}
 		/*
@@ -2761,7 +2813,7 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
 	unsigned int i, err_mask, printed = 0;
 	u32 err_cause;
 
-	err_cause = readl(mmio + hpriv->irq_cause_ofs);
+	err_cause = readl(mmio + hpriv->irq_cause_offset);
 
 	dev_printk(KERN_ERR, host->dev, "PCI ERROR; PCI IRQ cause=0x%08x\n",
 		   err_cause);
@@ -2769,7 +2821,7 @@ static int mv_pci_error(struct ata_host *host, void __iomem *mmio)
 	DPRINTK("All regs @ PCI error\n");
 	mv_dump_all_regs(mmio, -1, to_pci_dev(host->dev));
 
-	writelfl(0, mmio + hpriv->irq_cause_ofs);
+	writelfl(0, mmio + hpriv->irq_cause_offset);
 
 	for (i = 0; i < host->n_ports; i++) {
 		ap = host->ports[i];
@@ -2906,7 +2958,7 @@ static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio)
 
 static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
 {
-	writel(0x0fcfffff, mmio + MV_FLASH_CTL_OFS);
+	writel(0x0fcfffff, mmio + FLASH_CTL);
 }
 
 static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx,
@@ -2925,7 +2977,7 @@ static void mv5_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
 {
 	u32 tmp;
 
-	writel(0, mmio + MV_GPIO_PORT_CTL_OFS);
+	writel(0, mmio + GPIO_PORT_CTL);
 
 	/* FIXME: handle MV_HP_ERRATA_50XXB2 errata */
 
@@ -2943,14 +2995,14 @@ static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
 	int fix_apm_sq = (hpriv->hp_flags & MV_HP_ERRATA_50XXB0);
 
 	if (fix_apm_sq) {
-		tmp = readl(phy_mmio + MV5_LTMODE_OFS);
+		tmp = readl(phy_mmio + MV5_LTMODE);
 		tmp |= (1 << 19);
-		writel(tmp, phy_mmio + MV5_LTMODE_OFS);
+		writel(tmp, phy_mmio + MV5_LTMODE);
 
-		tmp = readl(phy_mmio + MV5_PHY_CTL_OFS);
+		tmp = readl(phy_mmio + MV5_PHY_CTL);
 		tmp &= ~0x3;
 		tmp |= 0x1;
-		writel(tmp, phy_mmio + MV5_PHY_CTL_OFS);
+		writel(tmp, phy_mmio + MV5_PHY_CTL);
 	}
 
 	tmp = readl(phy_mmio + MV5_PHY_MODE);
@@ -2971,7 +3023,7 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
 	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);	/* command */
-	writel(0x11f, port_mmio + EDMA_CFG_OFS);
+	writel(0x11f, port_mmio + EDMA_CFG);
 	ZERO(0x004);	/* timer */
 	ZERO(0x008);	/* irq err cause */
 	ZERO(0x00c);	/* irq err mask */
@@ -2982,7 +3034,7 @@ static void mv5_reset_hc_port(struct mv_host_priv *hpriv, void __iomem *mmio,
 	ZERO(0x024);	/* respq outp */
 	ZERO(0x020);	/* respq inp */
 	ZERO(0x02c);	/* test control */
-	writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
+	writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
 }
 #undef ZERO
 
@@ -3028,16 +3080,16 @@ static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio)
 	struct mv_host_priv *hpriv = host->private_data;
 	u32 tmp;
 
-	tmp = readl(mmio + MV_PCI_MODE_OFS);
+	tmp = readl(mmio + MV_PCI_MODE);
 	tmp &= 0xff00ffff;
-	writel(tmp, mmio + MV_PCI_MODE_OFS);
+	writel(tmp, mmio + MV_PCI_MODE);
 
 	ZERO(MV_PCI_DISC_TIMER);
 	ZERO(MV_PCI_MSI_TRIGGER);
-	writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT_OFS);
+	writel(0x000100ff, mmio + MV_PCI_XBAR_TMOUT);
 	ZERO(MV_PCI_SERR_MASK);
-	ZERO(hpriv->irq_cause_ofs);
-	ZERO(hpriv->irq_mask_ofs);
+	ZERO(hpriv->irq_cause_offset);
+	ZERO(hpriv->irq_mask_offset);
 	ZERO(MV_PCI_ERR_LOW_ADDRESS);
 	ZERO(MV_PCI_ERR_HIGH_ADDRESS);
 	ZERO(MV_PCI_ERR_ATTRIBUTE);
@@ -3051,10 +3103,10 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
 
 	mv5_reset_flash(hpriv, mmio);
 
-	tmp = readl(mmio + MV_GPIO_PORT_CTL_OFS);
+	tmp = readl(mmio + GPIO_PORT_CTL);
 	tmp &= 0x3;
 	tmp |= (1 << 5) | (1 << 6);
-	writel(tmp, mmio + MV_GPIO_PORT_CTL_OFS);
+	writel(tmp, mmio + GPIO_PORT_CTL);
 }
 
 /**
@@ -3069,7 +3121,7 @@ static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio)
 static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio,
 			unsigned int n_hc)
 {
-	void __iomem *reg = mmio + PCI_MAIN_CMD_STS_OFS;
+	void __iomem *reg = mmio + PCI_MAIN_CMD_STS;
 	int i, rc = 0;
 	u32 t;
 
@@ -3127,7 +3179,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
 	void __iomem *port_mmio;
 	u32 tmp;
 
-	tmp = readl(mmio + MV_RESET_CFG_OFS);
+	tmp = readl(mmio + RESET_CFG);
 	if ((tmp & (1 << 0)) == 0) {
 		hpriv->signal[idx].amps = 0x7 << 8;
 		hpriv->signal[idx].pre = 0x1 << 5;
@@ -3143,7 +3195,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx,
 
 static void mv6_enable_leds(struct mv_host_priv *hpriv, void __iomem *mmio)
 {
-	writel(0x00000060, mmio + MV_GPIO_PORT_CTL_OFS);
+	writel(0x00000060, mmio + GPIO_PORT_CTL);
 }
 
 static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -3201,6 +3253,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio,
 	 * Workaround for 60x1-B2 errata SATA#13:
 	 * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3,
 	 * so we must always rewrite PHY_MODE3 after PHY_MODE4.
+	 * Or ensure we use writelfl() when writing PHY_MODE4.
 	 */
 	writel(m3, port_mmio + PHY_MODE3);
 
@@ -3252,7 +3305,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
 	mv_reset_channel(hpriv, mmio, port);
 
 	ZERO(0x028);		/* command */
-	writel(0x101f, port_mmio + EDMA_CFG_OFS);
+	writel(0x101f, port_mmio + EDMA_CFG);
 	ZERO(0x004);		/* timer */
 	ZERO(0x008);		/* irq err cause */
 	ZERO(0x00c);		/* irq err mask */
@@ -3263,7 +3316,7 @@ static void mv_soc_reset_hc_port(struct mv_host_priv *hpriv,
 	ZERO(0x024);		/* respq outp */
 	ZERO(0x020);		/* respq inp */
 	ZERO(0x02c);		/* test control */
-	writel(0xbc, port_mmio + EDMA_IORDY_TMOUT_OFS);
+	writel(0xbc, port_mmio + EDMA_IORDY_TMOUT);
 }
 
 #undef ZERO
@@ -3308,12 +3361,12 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
 
 static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
 {
-	u32 ifcfg = readl(port_mmio + SATA_INTERFACE_CFG_OFS);
+	u32 ifcfg = readl(port_mmio + SATA_IFCFG);
 
 	ifcfg = (ifcfg & 0xf7f) | 0x9b1000;	/* from chip spec */
 	if (want_gen2i)
 		ifcfg |= (1 << 7);		/* enable gen2i speed */
-	writelfl(ifcfg, port_mmio + SATA_INTERFACE_CFG_OFS);
+	writelfl(ifcfg, port_mmio + SATA_IFCFG);
 }
 
 static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
@@ -3327,7 +3380,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 	 * to disable the EDMA engine before doing the EDMA_RESET operation.
 	 */
 	mv_stop_edma_engine(port_mmio);
-	writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
+	writelfl(EDMA_RESET, port_mmio + EDMA_CMD);
 
 	if (!IS_GEN_I(hpriv)) {
 		/* Enable 3.0gb/s link speed: this survives EDMA_RESET */
@@ -3336,11 +3389,11 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 	/*
 	 * Strobing EDMA_RESET here causes a hard reset of the SATA transport,
 	 * link, and physical layers.  It resets all SATA interface registers
-	 * (except for SATA_INTERFACE_CFG), and issues a COMRESET to the dev.
+	 * (except for SATA_IFCFG), and issues a COMRESET to the dev.
 	 */
-	writelfl(EDMA_RESET, port_mmio + EDMA_CMD_OFS);
+	writelfl(EDMA_RESET, port_mmio + EDMA_CMD);
 	udelay(25);	/* allow reset propagation */
-	writelfl(0, port_mmio + EDMA_CMD_OFS);
+	writelfl(0, port_mmio + EDMA_CMD);
 
 	hpriv->ops->phy_errata(hpriv, mmio, port_no);
 
@@ -3352,12 +3405,12 @@ static void mv_pmp_select(struct ata_port *ap, int pmp)
 {
 	if (sata_pmp_supported(ap)) {
 		void __iomem *port_mmio = mv_ap_base(ap);
-		u32 reg = readl(port_mmio + SATA_IFCTL_OFS);
+		u32 reg = readl(port_mmio + SATA_IFCTL);
 		int old = reg & 0xf;
 
 		if (old != pmp) {
 			reg = (reg & ~0xf) | pmp;
-			writelfl(reg, port_mmio + SATA_IFCTL_OFS);
+			writelfl(reg, port_mmio + SATA_IFCTL);
 		}
 	}
 }
@@ -3432,11 +3485,11 @@ static void mv_eh_thaw(struct ata_port *ap)
 	u32 hc_irq_cause;
 
 	/* clear EDMA errors on this port */
-	writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+	writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE);
 
 	/* clear pending irq events */
 	hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
-	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE);
 
 	mv_enable_port_irqs(ap, ERR_IRQ);
 }
@@ -3455,8 +3508,7 @@ static void mv_eh_thaw(struct ata_port *ap)
  */
 static void mv_port_init(struct ata_ioports *port,  void __iomem *port_mmio)
 {
-	void __iomem *shd_base = port_mmio + SHD_BLK_OFS;
-	unsigned serr_ofs;
+	void __iomem *serr, *shd_base = port_mmio + SHD_BLK;
 
 	/* PIO related setup
 	 */
@@ -3471,23 +3523,23 @@ static void mv_port_init(struct ata_ioports *port,  void __iomem *port_mmio)
 	port->status_addr =
 		port->command_addr = shd_base + (sizeof(u32) * ATA_REG_STATUS);
 	/* special case: control/altstatus doesn't have ATA_REG_ address */
-	port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST_OFS;
+	port->altstatus_addr = port->ctl_addr = shd_base + SHD_CTL_AST;
 
 	/* unused: */
 	port->cmd_addr = port->bmdma_addr = port->scr_addr = NULL;
 
 	/* Clear any currently outstanding port interrupt conditions */
-	serr_ofs = mv_scr_offset(SCR_ERROR);
-	writelfl(readl(port_mmio + serr_ofs), port_mmio + serr_ofs);
-	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+	serr = port_mmio + mv_scr_offset(SCR_ERROR);
+	writelfl(readl(serr), serr);
+	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE);
 
 	/* unmask all non-transient EDMA error interrupts */
-	writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK_OFS);
+	writelfl(~EDMA_ERR_IRQ_TRANSIENT, port_mmio + EDMA_ERR_IRQ_MASK);
 
 	VPRINTK("EDMA cfg=0x%08x EDMA IRQ err cause/mask=0x%08x/0x%08x\n",
-		readl(port_mmio + EDMA_CFG_OFS),
-		readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS),
-		readl(port_mmio + EDMA_ERR_IRQ_MASK_OFS));
+		readl(port_mmio + EDMA_CFG),
+		readl(port_mmio + EDMA_ERR_IRQ_CAUSE),
+		readl(port_mmio + EDMA_ERR_IRQ_MASK));
 }
 
 static unsigned int mv_in_pcix_mode(struct ata_host *host)
@@ -3498,7 +3550,7 @@ static unsigned int mv_in_pcix_mode(struct ata_host *host)
 
 	if (IS_SOC(hpriv) || !IS_PCIE(hpriv))
 		return 0;	/* not PCI-X capable */
-	reg = readl(mmio + MV_PCI_MODE_OFS);
+	reg = readl(mmio + MV_PCI_MODE);
 	if ((reg & MV_PCI_MODE_MASK) == 0)
 		return 0;	/* conventional PCI mode */
 	return 1;	/* chip is in PCI-X mode */
@@ -3511,13 +3563,25 @@ static int mv_pci_cut_through_okay(struct ata_host *host)
 	u32 reg;
 
 	if (!mv_in_pcix_mode(host)) {
-		reg = readl(mmio + PCI_COMMAND_OFS);
-		if (reg & PCI_COMMAND_MRDTRIG)
+		reg = readl(mmio + MV_PCI_COMMAND);
+		if (reg & MV_PCI_COMMAND_MRDTRIG)
 			return 0; /* not okay */
 	}
 	return 1; /* okay */
 }
 
+static void mv_60x1b2_errata_pci7(struct ata_host *host)
+{
+	struct mv_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->base;
+
+	/* workaround for 60x1-B2 errata PCI#7 */
+	if (mv_in_pcix_mode(host)) {
+		u32 reg = readl(mmio + MV_PCI_COMMAND);
+		writelfl(reg & ~MV_PCI_COMMAND_MWRCOM, mmio + MV_PCI_COMMAND);
+	}
+}
+
 static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 {
 	struct pci_dev *pdev = to_pci_dev(host->dev);
@@ -3571,6 +3635,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 
 		switch (pdev->revision) {
 		case 0x7:
+			mv_60x1b2_errata_pci7(host);
 			hp_flags |= MV_HP_ERRATA_60X1B2;
 			break;
 		case 0x9:
@@ -3647,12 +3712,12 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 
 	hpriv->hp_flags = hp_flags;
 	if (hp_flags & MV_HP_PCIE) {
-		hpriv->irq_cause_ofs	= PCIE_IRQ_CAUSE_OFS;
-		hpriv->irq_mask_ofs	= PCIE_IRQ_MASK_OFS;
+		hpriv->irq_cause_offset	= PCIE_IRQ_CAUSE;
+		hpriv->irq_mask_offset	= PCIE_IRQ_MASK;
 		hpriv->unmask_all_irqs	= PCIE_UNMASK_ALL_IRQS;
 	} else {
-		hpriv->irq_cause_ofs	= PCI_IRQ_CAUSE_OFS;
-		hpriv->irq_mask_ofs	= PCI_IRQ_MASK_OFS;
+		hpriv->irq_cause_offset	= PCI_IRQ_CAUSE;
+		hpriv->irq_mask_offset	= PCI_IRQ_MASK;
 		hpriv->unmask_all_irqs	= PCI_UNMASK_ALL_IRQS;
 	}
 
@@ -3681,11 +3746,11 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 		goto done;
 
 	if (IS_SOC(hpriv)) {
-		hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS;
-		hpriv->main_irq_mask_addr  = mmio + SOC_HC_MAIN_IRQ_MASK_OFS;
+		hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE;
+		hpriv->main_irq_mask_addr  = mmio + SOC_HC_MAIN_IRQ_MASK;
 	} else {
-		hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS;
-		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK_OFS;
+		hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE;
+		hpriv->main_irq_mask_addr  = mmio + PCI_HC_MAIN_IRQ_MASK;
 	}
 
 	/* initialize shadow irq mask with register's value */
@@ -3727,18 +3792,20 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 
 		VPRINTK("HC%i: HC config=0x%08x HC IRQ cause "
 			"(before clear)=0x%08x\n", hc,
-			readl(hc_mmio + HC_CFG_OFS),
-			readl(hc_mmio + HC_IRQ_CAUSE_OFS));
+			readl(hc_mmio + HC_CFG),
+			readl(hc_mmio + HC_IRQ_CAUSE));
 
 		/* Clear any currently outstanding hc interrupt conditions */
-		writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS);
+		writelfl(0, hc_mmio + HC_IRQ_CAUSE);
 	}
 
-	/* Clear any currently outstanding host interrupt conditions */
-	writelfl(0, mmio + hpriv->irq_cause_ofs);
+	if (!IS_SOC(hpriv)) {
+		/* Clear any currently outstanding host interrupt conditions */
+		writelfl(0, mmio + hpriv->irq_cause_offset);
 
-	/* and unmask interrupt generation for host regs */
-	writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_ofs);
+		/* and unmask interrupt generation for host regs */
+		writelfl(hpriv->unmask_all_irqs, mmio + hpriv->irq_mask_offset);
+	}
 
 	/*
 	 * enable only global host interrupts for now.
@@ -3844,7 +3911,7 @@ static int mv_platform_probe(struct platform_device *pdev)
 	host->iomap = NULL;
 	hpriv->base = devm_ioremap(&pdev->dev, res->start,
 				   res->end - res->start + 1);
-	hpriv->base -= MV_SATAHC0_REG_BASE;
+	hpriv->base -= SATAHC0_REG_BASE;
 
 	/*
 	 * (Re-)program MBUS remapping windows if we are asked to.
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 6617c9f..cb79b7a 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -29,6 +29,8 @@
 #ifndef __LINUX_ATA_H__
 #define __LINUX_ATA_H__
 
+#include <linux/kernel.h>
+#include <linux/string.h>
 #include <linux/types.h>
 #include <asm/byteorder.h>
 
@@ -91,6 +93,7 @@ enum {
 	ATA_ID_CFA_POWER	= 160,
 	ATA_ID_CFA_KEY_MGMT	= 162,
 	ATA_ID_CFA_MODES	= 163,
+	ATA_ID_DATA_SET_MGMT	= 169,
 	ATA_ID_ROT_SPEED	= 217,
 	ATA_ID_PIO4		= (1 << 1),
 
@@ -248,6 +251,7 @@ enum {
 	ATA_CMD_SMART		= 0xB0,
 	ATA_CMD_MEDIA_LOCK	= 0xDE,
 	ATA_CMD_MEDIA_UNLOCK	= 0xDF,
+	ATA_CMD_DSM		= 0x06,
 	/* marked obsolete in the ATA/ATAPI-7 spec */
 	ATA_CMD_RESTORE		= 0x10,
 
@@ -321,6 +325,9 @@ enum {
 	ATA_SMART_READ_VALUES	= 0xD0,
 	ATA_SMART_READ_THRESHOLDS = 0xD1,
 
+	/* feature values for Data Set Management */
+	ATA_DSM_TRIM		= 0x01,
+
 	/* password used in LBA Mid / LBA High for executing SMART commands */
 	ATA_SMART_LBAM_PASS	= 0x4F,
 	ATA_SMART_LBAH_PASS	= 0xC2,
@@ -723,6 +730,14 @@ static inline int ata_id_has_unload(const u16 *id)
 	return 0;
 }
 
+static inline int ata_id_has_trim(const u16 *id)
+{
+	if (ata_id_major_version(id) >= 7 &&
+	    (id[ATA_ID_DATA_SET_MGMT] & 1))
+		return 1;
+	return 0;
+}
+
 static inline int ata_id_current_chs_valid(const u16 *id)
 {
 	/* For ATA-1 devices, if the INITIALIZE DEVICE PARAMETERS command
@@ -863,6 +878,32 @@ static inline void ata_id_to_hd_driveid(u16 *id)
 #endif
 }
 
+/*
+ * Write up to 'max' LBA Range Entries to the buffer that will cover the
+ * extent from sector to sector + count.  This is used for TRIM and for
+ * ADD LBA(S) TO NV CACHE PINNED SET.
+ */
+static inline unsigned ata_set_lba_range_entries(void *_buffer, unsigned max,
+						u64 sector, unsigned long count)
+{
+	__le64 *buffer = _buffer;
+	unsigned i = 0;
+
+	while (i < max) {
+		u64 entry = sector |
+			((u64)(count > 0xffff ? 0xffff : count) << 48);
+		buffer[i++] = __cpu_to_le64(entry);
+		if (count <= 0xffff)
+			break;
+		count -= 0xffff;
+		sector += 0xffff;
+	}
+
+	max = ALIGN(i * 8, 512);
+	memset(buffer + i, 0, max - i * 8);
+	return max;
+}
+
 static inline int is_multi_taskfile(struct ata_taskfile *tf)
 {
 	return (tf->command == ATA_CMD_READ_MULTI) ||

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-03-25  3:01 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-03-25  3:01 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


No major 2.6.29 fixes have cropped up so far, since release.

Summary, nothing highly notable:
- sata_mv: large update, include ATAPI support (previously thought impossible)
- core updates from Alan that should help with error handling on SFF hardware
- large "magic number" -> "named constant" cleanup
- other minor updates, see shortlog below

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ahci.c              |   31 +-
 drivers/ata/ata_generic.c       |    4 +-
 drivers/ata/ata_piix.c          |   60 ++--
 drivers/ata/libata-core.c       |   14 +-
 drivers/ata/libata-eh.c         |   19 +-
 drivers/ata/libata-sff.c        |   91 ++++-
 drivers/ata/libata.h            |    2 -
 drivers/ata/pata_acpi.c         |    6 +-
 drivers/ata/pata_ali.c          |   28 +-
 drivers/ata/pata_amd.c          |   70 ++--
 drivers/ata/pata_artop.c        |   49 ++-
 drivers/ata/pata_at32.c         |    4 +-
 drivers/ata/pata_atiixp.c       |    6 +-
 drivers/ata/pata_bf54x.c        |    2 +-
 drivers/ata/pata_cmd640.c       |    2 +-
 drivers/ata/pata_cmd64x.c       |   24 +-
 drivers/ata/pata_cs5520.c       |    2 +-
 drivers/ata/pata_cs5530.c       |    8 +-
 drivers/ata/pata_cs5535.c       |    4 +-
 drivers/ata/pata_cs5536.c       |    4 +-
 drivers/ata/pata_cypress.c      |    4 +-
 drivers/ata/pata_efar.c         |    6 +-
 drivers/ata/pata_hpt366.c       |    4 +-
 drivers/ata/pata_hpt37x.c       |   28 +-
 drivers/ata/pata_hpt3x2n.c      |    4 +-
 drivers/ata/pata_hpt3x3.c       |    6 +-
 drivers/ata/pata_icside.c       |    4 +-
 drivers/ata/pata_isapnp.c       |   14 +-
 drivers/ata/pata_it8213.c       |    4 +-
 drivers/ata/pata_it821x.c       |   16 +-
 drivers/ata/pata_ixp4xx_cf.c    |    2 +-
 drivers/ata/pata_jmicron.c      |    4 +-
 drivers/ata/pata_legacy.c       |    2 +-
 drivers/ata/pata_marvell.c      |    8 +-
 drivers/ata/pata_mpc52xx.c      |    4 +-
 drivers/ata/pata_mpiix.c        |    2 +-
 drivers/ata/pata_netcell.c      |    4 +-
 drivers/ata/pata_ninja32.c      |    2 +-
 drivers/ata/pata_ns87410.c      |    2 +-
 drivers/ata/pata_ns87415.c      |    8 +-
 drivers/ata/pata_octeon_cf.c    |    4 +-
 drivers/ata/pata_oldpiix.c      |    4 +-
 drivers/ata/pata_opti.c         |    2 +-
 drivers/ata/pata_optidma.c      |   10 +-
 drivers/ata/pata_pcmcia.c       |   36 ++-
 drivers/ata/pata_pdc2027x.c     |   12 +-
 drivers/ata/pata_pdc202xx_old.c |   12 +-
 drivers/ata/pata_qdi.c          |    4 +-
 drivers/ata/pata_radisys.c      |    6 +-
 drivers/ata/pata_rb532_cf.c     |   64 +---
 drivers/ata/pata_rz1000.c       |    2 +-
 drivers/ata/pata_sc1200.c       |   35 ++-
 drivers/ata/pata_scc.c          |    4 +-
 drivers/ata/pata_sch.c          |    6 +-
 drivers/ata/pata_serverworks.c  |   20 +-
 drivers/ata/pata_sil680.c       |    8 +-
 drivers/ata/pata_sis.c          |   32 +-
 drivers/ata/pata_sl82c105.c     |    6 +-
 drivers/ata/pata_triflex.c      |    4 +-
 drivers/ata/pata_via.c          |   24 +-
 drivers/ata/pata_winbond.c      |    2 +-
 drivers/ata/pdc_adma.c          |    4 +-
 drivers/ata/sata_fsl.c          |    4 +-
 drivers/ata/sata_inic162x.c     |    4 +-
 drivers/ata/sata_mv.c           |  868 +++++++++++++++++++++++++++++++++------
 drivers/ata/sata_nv.c           |    7 +-
 drivers/ata/sata_promise.c      |   30 +-
 drivers/ata/sata_qstor.c        |    3 +-
 drivers/ata/sata_sil.c          |   16 +-
 drivers/ata/sata_sil24.c        |   18 +-
 drivers/ata/sata_sis.c          |    4 +-
 drivers/ata/sata_svw.c          |   16 +-
 drivers/ata/sata_sx4.c          |    4 +-
 drivers/ata/sata_uli.c          |    2 +-
 drivers/ata/sata_via.c          |   16 +-
 drivers/ata/sata_vsc.c          |    7 +-
 include/linux/ata.h             |    6 +
 include/linux/libata.h          |    8 +
 78 files changed, 1330 insertions(+), 542 deletions(-)

Alan Cox (4):
      pata_artop: Serializing support
      pata_sc1200: Activate secondary channel
      [libata] Drain data on errors
      [libata] Improve timeout handling

David Milburn (1):
      [libata] ahci: correct enclosure LED state save

Erik Inge Bolsø (4):
      include/linux/ata.h: add some more transfer masks
      [libata] convert drivers to use ata.h mode mask defines
      pata_radisys: fix mwdma_mask to exclude mwdma0
      pata_efar: fix *dma_mask

Florian Fainelli (1):
      pata-rb532-cf: platform_get_irq() fix ignored failure

Maciej Rutecki (1):
      ahci: Blacklist HP Compaq 6720s that spins off disks during ACPI power off

Mark Lord (19):
      sata_mv: cleanup chipset GENeration FLAGS
      sata_mv: rearrange mv_start_dma() and friends
      sata_mv: restructure mv_qc_issue
      sata_mv: update ata_qc_from_tag
      sata_mv: mv_fill_sg fixes v2
      sata_mv: introduce support for ATAPI devices
      sata_mv: optimize use of mv_edma_cfg
      sata_mv: remove leftovers
      [libata] sata_mv: cache frequently-accessed registers
      [libata] sata_mv: Enable use of (basic) DMA for ATAPI on GEN_IIE chips
      [libata] sata_mv: Tighten up interrupt masking in mv_qc_issue()
      [libata] sata_mv: Add a new mv_sff_check_status() function to sata_mv.
      [libata] Export ata_pio_queue_task() so that it can be used from sata_mv.
      [libata] sata_mv: Implement direct FIS transmission via mv_qc_issue_fis().
      sata_mv: cosmetic preparations for IRQ coalescing
      sata_mv: implement IRQ coalescing (v2)
      sata_mv: optimize IRQ coalescing for 8-port chips
      sata_mv: fix LED blinking for SoC+NCQ
      [libata] More robust parsing for IDENTIFY DEVICE multi_count field

Phil Sutter (4):
      pata-rb532-cf: replace rb532_pata_finish_io()
      pata-rb532-cf: use ata_sff_exec_command()
      pata-rb532-cf: use ata_sff_data_xfer32()
      pata-rb532-cf: drop custom freeze and thaw

Tejun Heo (1):
      ahci: drop intx manipulation on msi enable

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 66e012c..788bba2 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -404,7 +404,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	/* board_ahci */
 	{
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -412,7 +412,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_NCQ | AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_vt8251_ops,
 	},
@@ -420,7 +420,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_IRQ_IF_ERR),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -430,7 +430,7 @@ static const struct ata_port_info ahci_port_info[] = {
 				 AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI |
 				 AHCI_HFLAG_SECT255),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_sb600_ops,
 	},
@@ -440,7 +440,7 @@ static const struct ata_port_info ahci_port_info[] = {
 				 AHCI_HFLAG_MV_PATA | AHCI_HFLAG_NO_PMP),
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -448,7 +448,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_sb600_ops,
 	},
@@ -456,7 +456,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_YES_NCQ),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -464,7 +464,7 @@ static const struct ata_port_info ahci_port_info[] = {
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_NO_PMP),
 		.flags		= AHCI_FLAG_COMMON,
-		.pio_mask	= 0x1f, /* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
@@ -1348,7 +1348,7 @@ static ssize_t ahci_transmit_led_message(struct ata_port *ap, u32 state,
 	writel(message[1], mmio + hpriv->em_loc+4);
 
 	/* save off new led state for port/slot */
-	emp->led_state = message[1];
+	emp->led_state = state;
 
 	/*
 	 * tell hardware to transmit the message
@@ -2565,6 +2565,15 @@ static bool ahci_broken_system_poweroff(struct pci_dev *pdev)
 			/* PCI slot number of the controller */
 			.driver_data = (void *)0x1FUL,
 		},
+		{
+			.ident = "HP Compaq 6720s",
+			.matches = {
+				DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+				DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6720s"),
+			},
+			/* PCI slot number of the controller */
+			.driver_data = (void *)0x1FUL,
+		},
 
 		{ }	/* terminate list */
 	};
@@ -2647,8 +2656,8 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
 		hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
 
-	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
-		pci_intx(pdev, 1);
+	if (!(hpriv->flags & AHCI_HFLAG_NO_MSI))
+		pci_enable_msi(pdev);
 
 	/* save initial config */
 	ahci_save_initial_config(pdev, hpriv);
diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c
index dc48a63..ecfd22b 100644
--- a/drivers/ata/ata_generic.c
+++ b/drivers/ata/ata_generic.c
@@ -118,8 +118,8 @@ static int ata_generic_init_one(struct pci_dev *dev, const struct pci_device_id
 	u16 command;
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &generic_port_ops
 	};
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index ef8b30d..e5cbe80 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -446,34 +446,34 @@ static struct ata_port_info piix_port_info[] = {
 	[piix_pata_mwdma] = 	/* PIIX3 MWDMA only */
 	{
 		.flags		= PIIX_PATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
 		.port_ops	= &piix_pata_ops,
 	},
 
 	[piix_pata_33] =	/* PIIX4 at 33MHz */
 	{
 		.flags		= PIIX_PATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
-		.udma_mask	= ATA_UDMA_MASK_40C,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+		.udma_mask	= ATA_UDMA2,
 		.port_ops	= &piix_pata_ops,
 	},
 
 	[ich_pata_33] = 	/* ICH0 - ICH at 33Mhz*/
 	{
 		.flags		= PIIX_PATA_FLAGS,
-		.pio_mask 	= 0x1f,	/* pio 0-4 */
-		.mwdma_mask	= 0x06, /* Check: maybe 0x07  */
-		.udma_mask	= ATA_UDMA2, /* UDMA33 */
+		.pio_mask 	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY, /* Check: maybe MWDMA0 is ok  */
+		.udma_mask	= ATA_UDMA2,
 		.port_ops	= &ich_pata_ops,
 	},
 
 	[ich_pata_66] = 	/* ICH controllers up to 66MHz */
 	{
 		.flags		= PIIX_PATA_FLAGS,
-		.pio_mask 	= 0x1f,	/* pio 0-4 */
-		.mwdma_mask	= 0x06, /* MWDMA0 is broken on chip */
+		.pio_mask 	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY, /* MWDMA0 is broken on chip */
 		.udma_mask	= ATA_UDMA4,
 		.port_ops	= &ich_pata_ops,
 	},
@@ -481,17 +481,17 @@ static struct ata_port_info piix_port_info[] = {
 	[ich_pata_100] =
 	{
 		.flags		= PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x06, /* mwdma1-2 */
-		.udma_mask	= ATA_UDMA5, /* udma0-5 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY,
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &ich_pata_ops,
 	},
 
 	[ich5_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -499,8 +499,8 @@ static struct ata_port_info piix_port_info[] = {
 	[ich6_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -508,8 +508,8 @@ static struct ata_port_info piix_port_info[] = {
 	[ich6m_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -517,8 +517,8 @@ static struct ata_port_info piix_port_info[] = {
 	[ich8_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -526,8 +526,8 @@ static struct ata_port_info piix_port_info[] = {
 	[ich8_2port_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -535,8 +535,8 @@ static struct ata_port_info piix_port_info[] = {
 	[tolapai_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -544,8 +544,8 @@ static struct ata_port_info piix_port_info[] = {
 	[ich8m_apple_sata] =
 	{
 		.flags		= PIIX_SATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &piix_sata_ops,
 	},
@@ -553,9 +553,9 @@ static struct ata_port_info piix_port_info[] = {
 	[piix_pata_vmw] =
 	{
 		.flags		= PIIX_PATA_FLAGS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
-		.udma_mask	= ATA_UDMA_MASK_40C,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY, /* mwdma1-2 ?? CHECK 0 should be ok but slow */
+		.udma_mask	= ATA_UDMA2,
 		.port_ops	= &piix_vmw_ops,
 	},
 
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 060bcd6..e7ea77c 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -57,6 +57,7 @@
 #include <linux/scatterlist.h>
 #include <linux/io.h>
 #include <linux/async.h>
+#include <linux/log2.h>
 #include <scsi/scsi.h>
 #include <scsi/scsi_cmnd.h>
 #include <scsi/scsi_host.h>
@@ -2389,6 +2390,7 @@ int ata_dev_configure(struct ata_device *dev)
 	dev->cylinders = 0;
 	dev->heads = 0;
 	dev->sectors = 0;
+	dev->multi_count = 0;
 
 	/*
 	 * common ATA, ATAPI feature tests
@@ -2426,8 +2428,15 @@ int ata_dev_configure(struct ata_device *dev)
 
 		dev->n_sectors = ata_id_n_sectors(id);
 
-		if (dev->id[59] & 0x100)
-			dev->multi_count = dev->id[59] & 0xff;
+		/* get current R/W Multiple count setting */
+		if ((dev->id[47] >> 8) == 0x80 && (dev->id[59] & 0x100)) {
+			unsigned int max = dev->id[47] & 0xff;
+			unsigned int cnt = dev->id[59] & 0xff;
+			/* only recognize/allow powers of two here */
+			if (is_power_of_2(max) && is_power_of_2(cnt))
+				if (cnt <= max)
+					dev->multi_count = cnt;
+		}
 
 		if (ata_id_has_lba(id)) {
 			const char *lba_desc;
@@ -6709,6 +6718,7 @@ EXPORT_SYMBOL_GPL(ata_id_c_string);
 EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
+EXPORT_SYMBOL_GPL(ata_pio_queue_task);
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
 EXPORT_SYMBOL_GPL(ata_timing_find_mode);
 EXPORT_SYMBOL_GPL(ata_timing_compute);
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index ea89091..0183131 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -547,7 +547,7 @@ void ata_scsi_error(struct Scsi_Host *host)
 
 	/* For new EH, all qcs are finished in one of three ways -
 	 * normal completion, error completion, and SCSI timeout.
-	 * Both cmpletions can race against SCSI timeout.  When normal
+	 * Both completions can race against SCSI timeout.  When normal
 	 * completion wins, the qc never reaches EH.  When error
 	 * completion wins, the qc has ATA_QCFLAG_FAILED set.
 	 *
@@ -562,7 +562,19 @@ void ata_scsi_error(struct Scsi_Host *host)
 		int nr_timedout = 0;
 
 		spin_lock_irqsave(ap->lock, flags);
-
+		
+		/* This must occur under the ap->lock as we don't want
+		   a polled recovery to race the real interrupt handler
+		   
+		   The lost_interrupt handler checks for any completed but
+		   non-notified command and completes much like an IRQ handler.
+		   
+		   We then fall into the error recovery code which will treat
+		   this as if normal completion won the race */
+
+		if (ap->ops->lost_interrupt)
+			ap->ops->lost_interrupt(ap);
+			
 		list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) {
 			struct ata_queued_cmd *qc;
 
@@ -606,6 +618,9 @@ void ata_scsi_error(struct Scsi_Host *host)
 		ap->eh_tries = ATA_EH_MAX_TRIES;
 	} else
 		spin_unlock_wait(ap->lock);
+		
+	/* If we timed raced normal completion and there is nothing to
+	   recover nr_timedout == 0 why exactly are we doing error recovery ? */
 
  repeat:
 	/* invoke error handler */
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index f93dc02..8332e97 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -52,6 +52,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.softreset		= ata_sff_softreset,
 	.hardreset		= sata_sff_hardreset,
 	.postreset		= ata_sff_postreset,
+	.drain_fifo		= ata_sff_drain_fifo,
 	.error_handler		= ata_sff_error_handler,
 	.post_internal_cmd	= ata_sff_post_internal_cmd,
 
@@ -64,6 +65,8 @@ const struct ata_port_operations ata_sff_port_ops = {
 	.sff_irq_on		= ata_sff_irq_on,
 	.sff_irq_clear		= ata_sff_irq_clear,
 
+	.lost_interrupt		= ata_sff_lost_interrupt,
+
 	.port_start		= ata_sff_port_start,
 };
 EXPORT_SYMBOL_GPL(ata_sff_port_ops);
@@ -1646,7 +1649,7 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
  *	RETURNS:
  *	One if interrupt was handled, zero if not (shared irq).
  */
-inline unsigned int ata_sff_host_intr(struct ata_port *ap,
+unsigned int ata_sff_host_intr(struct ata_port *ap,
 				      struct ata_queued_cmd *qc)
 {
 	struct ata_eh_info *ehi = &ap->link.eh_info;
@@ -1775,6 +1778,48 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
 EXPORT_SYMBOL_GPL(ata_sff_interrupt);
 
 /**
+ *	ata_sff_lost_interrupt	-	Check for an apparent lost interrupt
+ *	@ap: port that appears to have timed out
+ *
+ *	Called from the libata error handlers when the core code suspects
+ *	an interrupt has been lost. If it has complete anything we can and
+ *	then return. Interface must support altstatus for this faster
+ *	recovery to occur.
+ *
+ *	Locking:
+ *	Caller holds host lock
+ */
+
+void ata_sff_lost_interrupt(struct ata_port *ap)
+{
+	u8 status;
+	struct ata_queued_cmd *qc;
+
+	/* Only one outstanding command per SFF channel */
+	qc = ata_qc_from_tag(ap, ap->link.active_tag);
+	/* Check we have a live one.. */
+	if (qc == NULL ||  !(qc->flags & ATA_QCFLAG_ACTIVE))
+		return;
+	/* We cannot lose an interrupt on a polled command */
+	if (qc->tf.flags & ATA_TFLAG_POLLING)
+		return;
+	/* See if the controller thinks it is still busy - if so the command
+	   isn't a lost IRQ but is still in progress */
+	status = ata_sff_altstatus(ap);
+	if (status & ATA_BUSY)
+		return;
+
+	/* There was a command running, we are no longer busy and we have
+	   no interrupt. */
+	ata_port_printk(ap, KERN_WARNING, "lost interrupt (Status 0x%x)\n",
+								status);
+	/* Run the host interrupt logic as if the interrupt had not been
+	   lost */
+	ata_sff_host_intr(ap, qc);
+}
+EXPORT_SYMBOL_GPL(ata_sff_lost_interrupt);
+
+/**
  *	ata_sff_freeze - Freeze SFF controller port
  *	@ap: port to freeze
  *
@@ -2199,6 +2244,39 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 EXPORT_SYMBOL_GPL(ata_sff_postreset);
 
 /**
+ *	ata_sff_drain_fifo - Stock FIFO drain logic for SFF controllers
+ *	@qc: command
+ *
+ *	Drain the FIFO and device of any stuck data following a command
+ *	failing to complete. In some cases this is neccessary before a
+ *	reset will recover the device.
+ *
+ */
+
+void ata_sff_drain_fifo(struct ata_queued_cmd *qc)
+{
+	int count;
+	struct ata_port *ap;
+
+	/* We only need to flush incoming data when a command was running */
+	if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+		return;
+
+	ap = qc->ap;
+	/* Drain up to 64K of data before we give up this recovery method */
+	for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+						&& count < 32768; count++)
+		ioread16(ap->ioaddr.data_addr);
+
+	/* Can become DEBUG later */
+	if (count)
+		ata_port_printk(ap, KERN_DEBUG,
+			"drained %d bytes to clear DRQ.\n", count);
+
+}
+EXPORT_SYMBOL_GPL(ata_sff_drain_fifo);
+
+/**
  *	ata_sff_error_handler - Stock error handler for BMDMA controller
  *	@ap: port to handle error for
  *
@@ -2239,7 +2317,8 @@ void ata_sff_error_handler(struct ata_port *ap)
 		 * really a timeout event, adjust error mask and
 		 * cancel frozen state.
 		 */
-		if (qc->err_mask == AC_ERR_TIMEOUT && (host_stat & ATA_DMA_ERR)) {
+		if (qc->err_mask == AC_ERR_TIMEOUT
+						&& (host_stat & ATA_DMA_ERR)) {
 			qc->err_mask = AC_ERR_HOST_BUS;
 			thaw = 1;
 		}
@@ -2250,6 +2329,13 @@ void ata_sff_error_handler(struct ata_port *ap)
 	ata_sff_sync(ap);		/* FIXME: We don't need this */
 	ap->ops->sff_check_status(ap);
 	ap->ops->sff_irq_clear(ap);
+	/* We *MUST* do FIFO draining before we issue a reset as several
+	 * devices helpfully clear their internal state and will lock solid
+	 * if we touch the data port post reset. Pass qc in case anyone wants
+	 *  to do different PIO/DMA recovery or has per command fixups
+	 */
+	if (ap->ops->drain_fifo)
+		ap->ops->drain_fifo(qc);
 
 	spin_unlock_irqrestore(ap->lock, flags);
 
@@ -2959,4 +3045,3 @@ out:
 EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 
 #endif /* CONFIG_PCI */
-
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index cea8014..89a1e00 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -79,8 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
 extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_pio_queue_task(struct ata_port *ap, void *data,
-			       unsigned long delay);
 extern void ata_port_flush_task(struct ata_port *ap);
 extern unsigned ata_exec_internal(struct ata_device *dev,
 				  struct ata_taskfile *tf, const u8 *cdb,
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index 8b77a98..d8f35fe 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -246,9 +246,9 @@ static int pacpi_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
-		.udma_mask 	= 0x7f,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA6,
 
 		.port_ops	= &pacpi_ops,
 	};
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index eb99dbe..751b7ea 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -492,53 +492,53 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_early = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &ali_early_port_ops
 	};
 	/* Revision 0x20 added DMA */
 	static const struct ata_port_info info_20 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &ali_20_port_ops
 	};
 	/* Revision 0x20 with support logic added UDMA */
 	static const struct ata_port_info info_20_udma = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,	/* UDMA33 */
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &ali_20_port_ops
 	};
 	/* Revision 0xC2 adds UDMA66 */
 	static const struct ata_port_info info_c2 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC3 is UDMA66 for now */
 	static const struct ata_port_info info_c3 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &ali_c2_port_ops
 	};
 	/* Revision 0xC4 is UDMA100 */
 	static const struct ata_port_info info_c4 = {
 		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &ali_c4_port_ops
 	};
 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
 	static const struct ata_port_info info_c5 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &ali_c5_port_ops
 	};
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 115b1cd..33a74f1 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -455,74 +455,74 @@ static void amd_clear_fifo(struct pci_dev *pdev)
 static int amd_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info[10] = {
-		{	/* 0: AMD 7401 */
+		{	/* 0: AMD 7401 - no swdma */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,	/* No SWDMA */
-			.udma_mask = 0x07,	/* UDMA 33 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA2,
 			.port_ops = &amd33_port_ops
 		},
 		{	/* 1: Early AMD7409 - no swdma */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA4,	/* UDMA 66 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA4,
 			.port_ops = &amd66_port_ops
 		},
-		{	/* 2: AMD 7409, no swdma errata */
+		{	/* 2: AMD 7409 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA4,	/* UDMA 66 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA4,
 			.port_ops = &amd66_port_ops
 		},
 		{	/* 3: AMD 7411 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &amd100_port_ops
 		},
 		{	/* 4: AMD 7441 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &amd100_port_ops
 		},
-		{	/* 5: AMD 8111*/
+		{	/* 5: AMD 8111 - no swdma */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA6,	/* UDMA 133, no swdma */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA6,
 			.port_ops = &amd133_port_ops
 		},
-		{	/* 6: AMD 8111 UDMA 100 (Serenade) */
+		{	/* 6: AMD 8111 UDMA 100 (Serenade) - no swdma */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA5,	/* UDMA 100, no swdma */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &amd133_port_ops
 		},
 		{	/* 7: Nvidia Nforce */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &nv100_port_ops
 		},
-		{	/* 8: Nvidia Nforce2 and later */
+		{	/* 8: Nvidia Nforce2 and later - no swdma */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA6,	/* UDMA 133, no swdma */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA6,
 			.port_ops = &nv133_port_ops
 		},
 		{	/* 9: AMD CS5536 (Geode companion) */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = ATA_UDMA5,	/* UDMA 100 */
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA5,
 			.port_ops = &amd100_port_ops
 		}
 	};
diff --git a/drivers/ata/pata_artop.c b/drivers/ata/pata_artop.c
index 6b3092c..d332cfd 100644
--- a/drivers/ata/pata_artop.c
+++ b/drivers/ata/pata_artop.c
@@ -12,7 +12,6 @@
  *		performance Alessandro Zummo <alessandro.zummo@towertech.it>
  *
  *	TODO
- *	850 serialization once the core supports it
  *	Investigate no_dsc on 850R
  *	Clock detect
  */
@@ -29,7 +28,7 @@
 #include <linux/ata.h>
 
 #define DRV_NAME	"pata_artop"
-#define DRV_VERSION	"0.4.4"
+#define DRV_VERSION	"0.4.5"
 
 /*
  *	The ARTOP has 33 Mhz and "over clocked" timing tables. Until we
@@ -283,6 +282,31 @@ static void artop6260_set_dmamode (struct ata_port *ap, struct ata_device *adev)
 	pci_write_config_byte(pdev, 0x44 + ap->port_no, ultra);
 }
 
+/**
+ *	artop_6210_qc_defer	-	implement serialization
+ *	@qc: command
+ *
+ *	Issue commands per host on this chip.
+ */
+
+static int artop6210_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_host *host = qc->ap->host;
+	struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+	int rc;
+
+	/* First apply the usual rules */
+	rc = ata_std_qc_defer(qc);
+	if (rc != 0)
+		return rc;
+
+	/* Now apply serialization rules. Only allow a command if the
+	   other channel state machine is idle */
+	if (alt && alt->qc_active)
+		return	ATA_DEFER_PORT;
+	return 0;
+}
+
 static struct scsi_host_template artop_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -293,6 +317,7 @@ static struct ata_port_operations artop6210_ops = {
 	.set_piomode		= artop6210_set_piomode,
 	.set_dmamode		= artop6210_set_dmamode,
 	.prereset		= artop6210_pre_reset,
+	.qc_defer		= artop6210_qc_defer,
 };
 
 static struct ata_port_operations artop6260_ops = {
@@ -323,29 +348,29 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	static const struct ata_port_info info_6210 = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA2,
 		.port_ops	= &artop6210_ops,
 	};
 	static const struct ata_port_info info_626x = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA4,
 		.port_ops	= &artop6260_ops,
 	};
 	static const struct ata_port_info info_628x = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5,
 		.port_ops	= &artop6260_ops,
 	};
 	static const struct ata_port_info info_628x_fast = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA6,
 		.port_ops	= &artop6260_ops,
 	};
@@ -362,12 +387,8 @@ static int artop_init_one (struct pci_dev *pdev, const struct pci_device_id *id)
 
 	if (id->driver_data == 0) {	/* 6210 variant */
 		ppi[0] = &info_6210;
-		ppi[1] = &ata_dummy_port_info;
 		/* BIOS may have left us in UDMA, clear it before libata probe */
 		pci_write_config_byte(pdev, 0x54, 0);
-		/* For the moment (also lacks dsc) */
-		printk(KERN_WARNING "ARTOP 6210 requires serialize functionality not yet supported by libata.\n");
-		printk(KERN_WARNING "Secondary ATA ports will not be activated.\n");
 	}
 	else if (id->driver_data == 1)	/* 6260 */
 		ppi[0] = &info_626x;
diff --git a/drivers/ata/pata_at32.c b/drivers/ata/pata_at32.c
index ab61095..5c129f9 100644
--- a/drivers/ata/pata_at32.c
+++ b/drivers/ata/pata_at32.c
@@ -67,7 +67,9 @@
  *
  * Alter PIO_MASK below according to table to set maximal PIO mode.
  */
-#define PIO_MASK (0x1f)
+enum {
+  PIO_MASK = ATA_PIO4,
+};
 
 /*
  * Struct containing private information about device.
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index 506adde..bec0b8a 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -220,9 +220,9 @@ static int atiixp_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x06,	/* No MWDMA0 support */
-		.udma_mask = 0x3F,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA12_ONLY,
+		.udma_mask = ATA_UDMA5,
 		.port_ops = &atiixp_port_ops
 	};
 	static const struct pci_bits atiixp_enable_bits[] = {
diff --git a/drivers/ata/pata_bf54x.c b/drivers/ata/pata_bf54x.c
index 1050fed..c4b47a3 100644
--- a/drivers/ata/pata_bf54x.c
+++ b/drivers/ata/pata_bf54x.c
@@ -1502,7 +1502,7 @@ static struct ata_port_info bfin_port_info[] = {
 		.flags		= ATA_FLAG_SLAVE_POSS
 				| ATA_FLAG_MMIO
 				| ATA_FLAG_NO_LEGACY,
-		.pio_mask	= 0x1f,	/* pio0-4 */
+		.pio_mask	= ATA_PIO4,
 		.mwdma_mask	= 0,
 		.udma_mask	= 0,
 		.port_ops	= &bfin_pata_ops,
diff --git a/drivers/ata/pata_cmd640.c b/drivers/ata/pata_cmd640.c
index 34a3942..5acf9fa 100644
--- a/drivers/ata/pata_cmd640.c
+++ b/drivers/ata/pata_cmd640.c
@@ -211,7 +211,7 @@ static int cmd640_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &cmd640_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_cmd64x.c b/drivers/ata/pata_cmd64x.c
index 3167d8f..f98dffe 100644
--- a/drivers/ata/pata_cmd64x.c
+++ b/drivers/ata/pata_cmd64x.c
@@ -299,40 +299,40 @@ static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static const struct ata_port_info cmd_info[6] = {
 		{	/* CMD 643 - no UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with broken UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 with working UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA2,
 			.port_ops = &cmd64x_port_ops
 		},
 		{	/* CMD 646 rev 1  */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.port_ops = &cmd646r1_port_ops
 		},
 		{	/* CMD 648 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &cmd648_port_ops
 		},
 		{	/* CMD 649 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA5,
 			.port_ops = &cmd648_port_ops
 		}
diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c
index 1186bcd..db6a969 100644
--- a/drivers/ata/pata_cs5520.c
+++ b/drivers/ata/pata_cs5520.c
@@ -158,7 +158,7 @@ static int __devinit cs5520_init_one(struct pci_dev *pdev, const struct pci_devi
 	static const unsigned int ctl_port[] = { 0x3F6, 0x376 };
 	struct ata_port_info pi = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,
+		.pio_mask	= ATA_PIO4,
 		.port_ops	= &cs5520_port_ops,
 	};
 	const struct ata_port_info *ppi[2];
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index bba4533..c974b05 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -298,15 +298,15 @@ static int cs5530_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &cs5530_port_ops
 	};
 	/* The docking connector doesn't do UDMA, and it seems not MWDMA */
 	static const struct ata_port_info info_palmax_secondary = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &cs5530_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_cs5535.c b/drivers/ata/pata_cs5535.c
index 8b236af..d33aa28 100644
--- a/drivers/ata/pata_cs5535.c
+++ b/drivers/ata/pata_cs5535.c
@@ -181,8 +181,8 @@ static int cs5535_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &cs5535_port_ops
 	};
diff --git a/drivers/ata/pata_cs5536.c b/drivers/ata/pata_cs5536.c
index afed929..6da4cb4 100644
--- a/drivers/ata/pata_cs5536.c
+++ b/drivers/ata/pata_cs5536.c
@@ -241,8 +241,8 @@ static int cs5536_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &cs5536_port_ops,
 	};
diff --git a/drivers/ata/pata_cypress.c b/drivers/ata/pata_cypress.c
index d546425..8fb040b 100644
--- a/drivers/ata/pata_cypress.c
+++ b/drivers/ata/pata_cypress.c
@@ -124,8 +124,8 @@ static int cy82c693_init_one(struct pci_dev *pdev, const struct pci_device_id *i
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &cy82c693_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c
index ac6392e..2085e0a 100644
--- a/drivers/ata/pata_efar.c
+++ b/drivers/ata/pata_efar.c
@@ -251,9 +251,9 @@ static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma1-2 */
-		.udma_mask 	= 0x0f, /* UDMA 66 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask 	= ATA_UDMA4,
 		.port_ops	= &efar_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index 65c28e5..d7f2da1 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -336,8 +336,8 @@ static int hpt36x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_hpt366 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &hpt366_port_ops
 	};
diff --git a/drivers/ata/pata_hpt37x.c b/drivers/ata/pata_hpt37x.c
index 4216399..81ab570 100644
--- a/drivers/ata/pata_hpt37x.c
+++ b/drivers/ata/pata_hpt37x.c
@@ -753,55 +753,55 @@ static int hpt37x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370_port_ops
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370a_port_ops
 	};
 	/* HPT370 - UDMA100 */
 	static const struct ata_port_info info_hpt370_33 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370_port_ops
 	};
 	/* HPT370A - UDMA100 */
 	static const struct ata_port_info info_hpt370a_33 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt370a_port_ops
 	};
 	/* HPT371, 372 and friends - UDMA133 */
 	static const struct ata_port_info info_hpt372 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt372_port_ops
 	};
 	/* HPT374 - UDMA100, function 1 uses different prereset method */
 	static const struct ata_port_info info_hpt374_fn0 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt372_port_ops
 	};
 	static const struct ata_port_info info_hpt374_fn1 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &hpt374_fn1_port_ops
 	};
diff --git a/drivers/ata/pata_hpt3x2n.c b/drivers/ata/pata_hpt3x2n.c
index d5c9fd7..3d59fe0 100644
--- a/drivers/ata/pata_hpt3x2n.c
+++ b/drivers/ata/pata_hpt3x2n.c
@@ -441,8 +441,8 @@ static int hpt3x2n_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	/* HPT372N and friends - UDMA133 */
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &hpt3x2n_port_ops
 	};
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index f19cc64..7e31025 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -188,11 +188,11 @@ static int hpt3x3_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
 		/* Further debug needed */
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 #endif
 		.port_ops = &hpt3x3_port_ops
 	};
diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c
index cf9e984..e7347db 100644
--- a/drivers/ata/pata_icside.c
+++ b/drivers/ata/pata_icside.c
@@ -297,7 +297,7 @@ static int icside_dma_init(struct pata_icside_info *info)
 
 	if (ec->dma != NO_DMA && !request_dma(ec->dma, DRV_NAME)) {
 		state->dma = ec->dma;
-		info->mwdma_mask = 0x07;	/* MW0..2 */
+		info->mwdma_mask = ATA_MWDMA2;
 	}
 
 	return 0;
@@ -473,7 +473,7 @@ static int __devinit pata_icside_add_ports(struct pata_icside_info *info)
 	for (i = 0; i < info->nr_ports; i++) {
 		struct ata_port *ap = host->ports[i];
 
-		ap->pio_mask = 0x1f;
+		ap->pio_mask = ATA_PIO4;
 		ap->mwdma_mask = info->mwdma_mask;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ops = &pata_icside_port_ops;
diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c
index 15cdb91..4bceb88 100644
--- a/drivers/ata/pata_isapnp.c
+++ b/drivers/ata/pata_isapnp.c
@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.2.2"
+#define DRV_VERSION "0.2.5"
 
 static struct scsi_host_template isapnp_sht = {
 	ATA_PIO_SHT(DRV_NAME),
@@ -28,6 +28,13 @@ static struct ata_port_operations isapnp_port_ops = {
 	.cable_detect	= ata_cable_40wire,
 };
 
+static struct ata_port_operations isapnp_noalt_port_ops = {
+	.inherits	= &ata_sff_port_ops,
+	.cable_detect	= ata_cable_40wire,
+	/* No altstatus so we don't want to use the lost interrupt poll */
+	.lost_interrupt = ATA_OP_NULL,
+};
+
 /**
  *	isapnp_init_one		-	attach an isapnp interface
  *	@idev: PnP device
@@ -65,8 +72,8 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 
 	ap = host->ports[0];
 
-	ap->ops = &isapnp_port_ops;
-	ap->pio_mask = 1;
+	ap->ops = &isapnp_noalt_port_ops;
+	ap->pio_mask = ATA_PIO0;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	ap->ioaddr.cmd_addr = cmd_addr;
@@ -76,6 +83,7 @@ static int isapnp_init_one(struct pnp_dev *idev, const struct pnp_device_id *dev
 					   pnp_port_start(idev, 1), 1);
 		ap->ioaddr.altstatus_addr = ctl_addr;
 		ap->ioaddr.ctl_addr = ctl_addr;
+		ap->ops = &isapnp_port_ops;
 	}
 
 	ata_sff_std_ports(&ap->ioaddr);
diff --git a/drivers/ata/pata_it8213.c b/drivers/ata/pata_it8213.c
index c113d7c..f156da8 100644
--- a/drivers/ata/pata_it8213.c
+++ b/drivers/ata/pata_it8213.c
@@ -262,8 +262,8 @@ static int it8213_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA4, /* FIXME: want UDMA 100? */
 		.port_ops	= &it8213_ops,
 	};
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index b05b86a..188bc2f 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -875,29 +875,29 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	static const struct ata_port_info info_smart = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_passthru_port_ops
 	};
 	static const struct ata_port_info info_rdc = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_rdc_port_ops
 	};
 	static const struct ata_port_info info_rdc_11 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		/* No UDMA */
 		.port_ops = &it821x_rdc_port_ops
 	};
diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c
index b173c15..19fdecf 100644
--- a/drivers/ata/pata_ixp4xx_cf.c
+++ b/drivers/ata/pata_ixp4xx_cf.c
@@ -176,7 +176,7 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev)
 	ap = host->ports[0];
 
 	ap->ops	= &ixp4xx_port_ops;
-	ap->pio_mask = 0x1f; /* PIO4 */
+	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY | ATA_FLAG_NO_ATAPI;
 
 	ixp4xx_setup_port(ap, data, cs0->start, cs1->start);
diff --git a/drivers/ata/pata_jmicron.c b/drivers/ata/pata_jmicron.c
index 38cf1ab..3a1474a 100644
--- a/drivers/ata/pata_jmicron.c
+++ b/drivers/ata/pata_jmicron.c
@@ -136,8 +136,8 @@ static int jmicron_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	static const struct ata_port_info info = {
 		.flags	= ATA_FLAG_SLAVE_POSS,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5,
 
 		.port_ops	= &jmicron_ops,
diff --git a/drivers/ata/pata_legacy.c b/drivers/ata/pata_legacy.c
index e3bc1b4..3f830f0 100644
--- a/drivers/ata/pata_legacy.c
+++ b/drivers/ata/pata_legacy.c
@@ -129,7 +129,7 @@ static int qdi;			/* Set to probe QDI controllers */
 static int winbond;		/* Set to probe Winbond controllers,
 					give I/O port if non standard */
 static int autospeed;		/* Chip present which snoops speed changes */
-static int pio_mask = 0x1F;	/* PIO range for autospeed devices */
+static int pio_mask = ATA_PIO4;	/* PIO range for autospeed devices */
 static int iordy_mask = 0xFFFFFFFF;	/* Use iordy if available */
 
 /**
diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c
index 76e399b..2096fb7 100644
--- a/drivers/ata/pata_marvell.c
+++ b/drivers/ata/pata_marvell.c
@@ -126,8 +126,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5,
 
 		.port_ops	= &marvell_ops,
@@ -136,8 +136,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i
 		/* Slave possible as its magically mapped not real */
 		.flags		= ATA_FLAG_SLAVE_POSS,
 
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA6,
 
 		.port_ops	= &marvell_ops,
diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c
index 50ae6d1..68d27bc 100644
--- a/drivers/ata/pata_mpc52xx.c
+++ b/drivers/ata/pata_mpc52xx.c
@@ -737,10 +737,10 @@ mpc52xx_ata_probe(struct of_device *op, const struct of_device_id *match)
 	 */
 	prop = of_get_property(op->node, "mwdma-mode", &proplen);
 	if ((prop) && (proplen >= 4))
-		mwdma_mask = 0x7 & ((1 << (*prop + 1)) - 1);
+		mwdma_mask = ATA_MWDMA2 & ((1 << (*prop + 1)) - 1);
 	prop = of_get_property(op->node, "udma-mode", &proplen);
 	if ((prop) && (proplen >= 4))
-		udma_mask = 0x7 & ((1 << (*prop + 1)) - 1);
+		udma_mask = ATA_UDMA2 & ((1 << (*prop + 1)) - 1);
 
 	ata_irq = irq_of_parse_and_map(op->node, 0);
 	if (ata_irq == NO_IRQ) {
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index aa576ca..b21f002 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -200,7 +200,7 @@ static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	   the MPIIX your box goes castors up */
 
 	ap->ops = &mpiix_port_ops;
-	ap->pio_mask = 0x1F;
+	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	ap->ioaddr.cmd_addr = cmd_addr;
diff --git a/drivers/ata/pata_netcell.c b/drivers/ata/pata_netcell.c
index 9dc05e1..bdb2369 100644
--- a/drivers/ata/pata_netcell.c
+++ b/drivers/ata/pata_netcell.c
@@ -51,8 +51,8 @@ static int netcell_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		.flags		= ATA_FLAG_SLAVE_POSS,
 		/* Actually we don't really care about these as the
 		   firmware deals with it */
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask 	= ATA_UDMA5, /* UDMA 133 */
 		.port_ops	= &netcell_ops,
 	};
diff --git a/drivers/ata/pata_ninja32.c b/drivers/ata/pata_ninja32.c
index 4dd9a3b..0fb6b1b 100644
--- a/drivers/ata/pata_ninja32.c
+++ b/drivers/ata/pata_ninja32.c
@@ -136,7 +136,7 @@ static int ninja32_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 	if (!base)
 		return -ENOMEM;
 	ap->ops = &ninja32_port_ops;
-	ap->pio_mask = 0x1F;
+	ap->pio_mask = ATA_PIO4;
 	ap->flags |= ATA_FLAG_SLAVE_POSS;
 
 	ap->ioaddr.cmd_addr = base + 0x10;
diff --git a/drivers/ata/pata_ns87410.c b/drivers/ata/pata_ns87410.c
index 40d411c..ca53fac 100644
--- a/drivers/ata/pata_ns87410.c
+++ b/drivers/ata/pata_ns87410.c
@@ -144,7 +144,7 @@ static int ns87410_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x0F,
+		.pio_mask = ATA_PIO3,
 		.port_ops = &ns87410_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_ns87415.c b/drivers/ata/pata_ns87415.c
index 89bf5f8..773b159 100644
--- a/drivers/ata/pata_ns87415.c
+++ b/drivers/ata/pata_ns87415.c
@@ -346,8 +346,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.port_ops	= &ns87415_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
@@ -355,8 +355,8 @@ static int ns87415_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 #if defined(CONFIG_SUPERIO)
 	static const struct ata_port_info info87560 = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.port_ops	= &ns87560_pata_ops,
 	};
 
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 0fe4ef3..efe2c19 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -871,7 +871,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
 	ap->private_data = cf_port;
 	cf_port->ap = ap;
 	ap->ops = &octeon_cf_ops;
-	ap->pio_mask = 0x7f; /* Support PIO 0-6 */
+	ap->pio_mask = ATA_PIO6;
 	ap->flags |= ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY
 		  | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING;
 
@@ -900,7 +900,7 @@ static int __devinit octeon_cf_probe(struct platform_device *pdev)
 		ap->ioaddr.ctl_addr	= cs1 + (6 << 1) + 1;
 		octeon_cf_ops.sff_data_xfer = octeon_cf_data_xfer16;
 
-		ap->mwdma_mask	= 0x1f; /* Support MWDMA 0-4 */
+		ap->mwdma_mask	= ATA_MWDMA4;
 		irq = platform_get_irq(pdev, 0);
 		irq_handler = octeon_cf_interrupt;
 
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index 2c1a91c..84ac503 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -238,8 +238,8 @@ static int oldpiix_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma1-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.port_ops	= &oldpiix_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_opti.c b/drivers/ata/pata_opti.c
index e4fa4d5..99eddda 100644
--- a/drivers/ata/pata_opti.c
+++ b/drivers/ata/pata_opti.c
@@ -163,7 +163,7 @@ static int opti_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &opti_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_optidma.c b/drivers/ata/pata_optidma.c
index 93bb6e9..86885a4 100644
--- a/drivers/ata/pata_optidma.c
+++ b/drivers/ata/pata_optidma.c
@@ -399,15 +399,15 @@ static int optidma_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info_82c700 = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &optidma_port_ops
 	};
 	static const struct ata_port_info info_82c700_udma = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &optiplus_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info_82c700, NULL };
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index 64b2e22..f4d009e 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.5"
 
 /*
  *	Private data structure to glue stuff together
@@ -126,6 +126,37 @@ static unsigned int ata_data_xfer_8bit(struct ata_device *dev,
 	return buflen;
 }
 
+/**
+ *	pcmcia_8bit_drain_fifo - Stock FIFO drain logic for SFF controllers
+ *	@qc: command
+ *
+ *	Drain the FIFO and device of any stuck data following a command
+ *	failing to complete. In some cases this is neccessary before a
+ *	reset will recover the device.
+ *
+ */
+ 
+void pcmcia_8bit_drain_fifo(struct ata_queued_cmd *qc)
+{
+	int count;
+	struct ata_port *ap;
+
+	/* We only need to flush incoming data when a command was running */
+	if (qc == NULL || qc->dma_dir == DMA_TO_DEVICE)
+		return;
+
+	ap = qc->ap;
+
+	/* Drain up to 64K of data before we give up this recovery method */
+	for (count = 0; (ap->ops->sff_check_status(ap) & ATA_DRQ)
+							&& count++ < 65536;)
+		ioread8(ap->ioaddr.data_addr);
+
+	if (count)
+		ata_port_printk(ap, KERN_WARNING, "drained %d bytes to clear DRQ.\n",
+								count);
+
+}
 
 static struct scsi_host_template pcmcia_sht = {
 	ATA_PIO_SHT(DRV_NAME),
@@ -143,6 +174,7 @@ static struct ata_port_operations pcmcia_8bit_port_ops = {
 	.sff_data_xfer	= ata_data_xfer_8bit,
 	.cable_detect	= ata_cable_40wire,
 	.set_mode	= pcmcia_set_mode_8bit,
+	.drain_fifo	= pcmcia_8bit_drain_fifo,
 };
 
 #define CS_CHECK(fn, ret) \
@@ -299,7 +331,7 @@ static int pcmcia_init_one(struct pcmcia_device *pdev)
 		ap = host->ports[p];
 
 		ap->ops = ops;
-		ap->pio_mask = 1;		/* ISA so PIO 0 cycles */
+		ap->pio_mask = ATA_PIO0;	/* ISA so PIO 0 cycles */
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ioaddr.cmd_addr = io_addr + 0x10 * p;
 		ap->ioaddr.altstatus_addr = ctl_addr + 0x10 * p;
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index e94efcc..ca5cad0 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -152,18 +152,18 @@ static struct ata_port_info pdc2027x_port_info[] = {
 	{
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
 		                  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= ATA_UDMA5, /* udma0-5 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &pdc2027x_pata100_ops,
 	},
 	/* PDC_UDMA_133 */
 	{
 		.flags		= ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
                         	  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
-		.udma_mask	= ATA_UDMA6, /* udma0-6 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc2027x_pata133_ops,
 	},
 };
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 799a6a0..5fedb3d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -291,22 +291,22 @@ static int pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id
 	static const struct ata_port_info info[3] = {
 		{
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA2,
 			.port_ops = &pdc2024x_port_ops
 		},
 		{
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &pdc2026x_port_ops
 		},
 		{
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA5,
 			.port_ops = &pdc2026x_port_ops
 		}
diff --git a/drivers/ata/pata_qdi.c b/drivers/ata/pata_qdi.c
index f1b26f7..45879dc 100644
--- a/drivers/ata/pata_qdi.c
+++ b/drivers/ata/pata_qdi.c
@@ -212,11 +212,11 @@ static __init int qdi_init_one(unsigned long port, int type, unsigned long io, i
 
 	if (type == 6580) {
 		ap->ops = &qdi6580_port_ops;
-		ap->pio_mask = 0x1F;
+		ap->pio_mask = ATA_PIO4;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 	} else {
 		ap->ops = &qdi6500_port_ops;
-		ap->pio_mask = 0x07;	/* Actually PIO3 !IORDY is possible */
+		ap->pio_mask = ATA_PIO2; /* Actually PIO3 !IORDY is possible */
 		ap->flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_IORDY;
 	}
 
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 695d44a..4401b33 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c
@@ -216,9 +216,9 @@ static int radisys_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags		= ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma1-2 */
-		.udma_mask	= 0x14, /* UDMA33/66 only */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA12_ONLY,
+		.udma_mask	= ATA_UDMA24_ONLY,
 		.port_ops	= &radisys_pata_ops,
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c
index ebfcda2..8e3cdef 100644
--- a/drivers/ata/pata_rb532_cf.c
+++ b/drivers/ata/pata_rb532_cf.c
@@ -48,63 +48,11 @@
 struct rb532_cf_info {
 	void __iomem	*iobase;
 	unsigned int	gpio_line;
-	int		frozen;
 	unsigned int	irq;
 };
 
 /* ------------------------------------------------------------------------ */
 
-static inline void rb532_pata_finish_io(struct ata_port *ap)
-{
-	struct ata_host *ah = ap->host;
-	struct rb532_cf_info *info = ah->private_data;
-
-	/* FIXME: Keep previous delay. If this is merely a fence then
-	   ata_sff_sync might be sufficient. */
-	ata_sff_dma_pause(ap);
-	ndelay(RB500_CF_IO_DELAY);
-}
-
-static void rb532_pata_exec_command(struct ata_port *ap,
-				const struct ata_taskfile *tf)
-{
-	writeb(tf->command, ap->ioaddr.command_addr);
-	rb532_pata_finish_io(ap);
-}
-
-static unsigned int rb532_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
-				unsigned int buflen, int write_data)
-{
-	struct ata_port *ap = adev->link->ap;
-	void __iomem *ioaddr = ap->ioaddr.data_addr;
-	int retlen = buflen;
-
-	if (write_data) {
-		for (; buflen > 0; buflen--, buf++)
-			writeb(*buf, ioaddr);
-	} else {
-		for (; buflen > 0; buflen--, buf++)
-			*buf = readb(ioaddr);
-	}
-
-	rb532_pata_finish_io(adev->link->ap);
-	return retlen;
-}
-
-static void rb532_pata_freeze(struct ata_port *ap)
-{
-	struct rb532_cf_info *info = ap->host->private_data;
-
-	info->frozen = 1;
-}
-
-static void rb532_pata_thaw(struct ata_port *ap)
-{
-	struct rb532_cf_info *info = ap->host->private_data;
-
-	info->frozen = 0;
-}
-
 static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
 {
 	struct ata_host *ah = dev_instance;
@@ -112,8 +60,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
 
 	if (gpio_get_value(info->gpio_line)) {
 		set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
-		if (!info->frozen)
-			ata_sff_interrupt(info->irq, dev_instance);
+		ata_sff_interrupt(info->irq, dev_instance);
 	} else {
 		set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
 	}
@@ -123,10 +70,7 @@ static irqreturn_t rb532_pata_irq_handler(int irq, void *dev_instance)
 
 static struct ata_port_operations rb532_pata_port_ops = {
 	.inherits		= &ata_sff_port_ops,
-	.sff_exec_command	= rb532_pata_exec_command,
-	.sff_data_xfer		= rb532_pata_data_xfer,
-	.freeze			= rb532_pata_freeze,
-	.thaw			= rb532_pata_thaw,
+	.sff_data_xfer		= ata_sff_data_xfer32,
 };
 
 /* ------------------------------------------------------------------------ */
@@ -145,7 +89,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
 	ap = ah->ports[0];
 
 	ap->ops		= &rb532_pata_port_ops;
-	ap->pio_mask	= 0x1f; /* PIO4 */
+	ap->pio_mask	= ATA_PIO4;
 	ap->flags	= ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
 
 	ap->ioaddr.cmd_addr	= info->iobase + RB500_CF_REG_BASE;
@@ -160,7 +104,7 @@ static void rb532_pata_setup_ports(struct ata_host *ah)
 
 static __devinit int rb532_pata_driver_probe(struct platform_device *pdev)
 {
-	unsigned int irq;
+	int irq;
 	int gpio;
 	struct resource *res;
 	struct ata_host *ah;
diff --git a/drivers/ata/pata_rz1000.c b/drivers/ata/pata_rz1000.c
index 46d6bc1..0c574c0 100644
--- a/drivers/ata/pata_rz1000.c
+++ b/drivers/ata/pata_rz1000.c
@@ -88,7 +88,7 @@ static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *en
 	static int printed_version;
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &rz1000_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 9a4bdca..f49814d 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -2,7 +2,6 @@
  * New ATA layer SC1200 driver		Alan Cox <alan@lxorguk.ukuu.org.uk>
  *
  * TODO: Mode selection filtering
- * TODO: Can't enable second channel until ATA core has serialize
  * TODO: Needs custom DMA cleanup code
  *
  * Based very heavily on
@@ -178,6 +177,31 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 	return ata_sff_qc_issue(qc);
 }
 
+/**
+ *	sc1200_qc_defer	-	implement serialization
+ *	@qc: command
+ *
+ *	Serialize command issue on this controller.
+ */
+
+static int sc1200_qc_defer(struct ata_queued_cmd *qc)
+{
+	struct ata_host *host = qc->ap->host;
+	struct ata_port *alt = host->ports[1 ^ qc->ap->port_no];
+	int rc;
+
+	/* First apply the usual rules */
+	rc = ata_std_qc_defer(qc);
+	if (rc != 0)
+		return rc;
+
+	/* Now apply serialization rules. Only allow a command if the
+	   other channel state machine is idle */
+	if (alt && alt->qc_active)
+		return	ATA_DEFER_PORT;
+	return 0;
+}
+
 static struct scsi_host_template sc1200_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 	.sg_tablesize	= LIBATA_DUMB_MAX_PRD,
@@ -187,6 +211,7 @@ static struct ata_port_operations sc1200_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
 	.qc_prep 	= ata_sff_dumb_qc_prep,
 	.qc_issue	= sc1200_qc_issue,
+	.qc_defer	= sc1200_qc_defer,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= sc1200_set_piomode,
 	.set_dmamode	= sc1200_set_dmamode,
@@ -205,13 +230,13 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
-		.udma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
+		.udma_mask = ATA_UDMA2,
 		.port_ops = &sc1200_port_ops
 	};
 	/* Can't enable port 2 yet, see top comments */
-	const struct ata_port_info *ppi[] = { &info, &ata_dummy_port_info };
+	const struct ata_port_info *ppi[] = { &info, };
 
 	return ata_pci_sff_init_one(dev, ppi, &sc1200_sht, NULL);
 }
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index d447f1c..4257d6b 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -1001,8 +1001,8 @@ static struct ata_port_operations scc_pata_ops = {
 static struct ata_port_info scc_port_info[] = {
 	{
 		.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_MMIO | ATA_FLAG_NO_LEGACY,
-		.pio_mask	= 0x1f,	/* pio0-4 */
-		.mwdma_mask	= 0x00,
+		.pio_mask	= ATA_PIO4,
+		/* No MWDMA */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &scc_pata_ops,
 	},
diff --git a/drivers/ata/pata_sch.c b/drivers/ata/pata_sch.c
index 6aeeeeb..99cceb4 100644
--- a/drivers/ata/pata_sch.c
+++ b/drivers/ata/pata_sch.c
@@ -84,9 +84,9 @@ static struct ata_port_operations sch_pata_ops = {
 
 static struct ata_port_info sch_port_info = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= ATA_PIO4,   /* pio0-4 */
-	.mwdma_mask	= ATA_MWDMA2, /* mwdma0-2 */
-	.udma_mask	= ATA_UDMA5,  /* udma0-5 */
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &sch_pata_ops,
 };
 
diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c
index 8d2fd9d..beaed12 100644
--- a/drivers/ata/pata_serverworks.c
+++ b/drivers/ata/pata_serverworks.c
@@ -398,26 +398,26 @@ static int serverworks_init_one(struct pci_dev *pdev, const struct pci_device_id
 	static const struct ata_port_info info[4] = {
 		{ /* OSB4 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			.udma_mask = ATA_UDMA2,
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* OSB4 no UDMA */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
-			.udma_mask = 0x00,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
+			/* No UDMA */
 			.port_ops = &serverworks_osb4_port_ops
 		}, { /* CSB5 */
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA4,
 			.port_ops = &serverworks_csb_port_ops
 		}, { /* CSB5 - later revisions*/
 			.flags = ATA_FLAG_SLAVE_POSS,
-			.pio_mask = 0x1f,
-			.mwdma_mask = 0x07,
+			.pio_mask = ATA_PIO4,
+			.mwdma_mask = ATA_MWDMA2,
 			.udma_mask = ATA_UDMA5,
 			.port_ops = &serverworks_csb_port_ops
 		}
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 9e764e5..4cb649d 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -282,15 +282,15 @@ static int __devinit sil680_init_one(struct pci_dev *pdev,
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &sil680_port_ops
 	};
 	static const struct ata_port_info info_slow = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &sil680_port_ops
 	};
diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c
index 27ceb42..488e77b 100644
--- a/drivers/ata/pata_sis.c
+++ b/drivers/ata/pata_sis.c
@@ -552,51 +552,57 @@ static struct ata_port_operations sis_old_ops = {
 
 static const struct ata_port_info sis_info = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
-	.mwdma_mask	= 0x07,
-	.udma_mask	= 0,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	/* No UDMA */
 	.port_ops	= &sis_old_ops,
 };
 static const struct ata_port_info sis_info33 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
-	.mwdma_mask	= 0x07,
-	.udma_mask	= ATA_UDMA2,	/* UDMA 33 */
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
+	.udma_mask	= ATA_UDMA2,
 	.port_ops	= &sis_old_ops,
 };
 static const struct ata_port_info sis_info66 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
-	.udma_mask	= ATA_UDMA4,	/* UDMA 66 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
+	.udma_mask	= ATA_UDMA4,
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info100 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA5,
 	.port_ops	= &sis_100_ops,
 };
 static const struct ata_port_info sis_info100_early = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA5,
-	.pio_mask	= 0x1f,	/* pio0-4 */
 	.port_ops	= &sis_66_ops,
 };
 static const struct ata_port_info sis_info133 = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_ops,
 };
 const struct ata_port_info sis_info133_for_sata = {
 	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_for_sata_ops,
 };
 static const struct ata_port_info sis_info133_early = {
 	.flags		= ATA_FLAG_SLAVE_POSS,
-	.pio_mask	= 0x1f,	/* pio0-4 */
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_133_early_ops,
 };
diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c
index 1b0e7b6..29f733c 100644
--- a/drivers/ata/pata_sl82c105.c
+++ b/drivers/ata/pata_sl82c105.c
@@ -283,13 +283,13 @@ static int sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id
 {
 	static const struct ata_port_info info_dma = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &sl82c105_port_ops
 	};
 	static const struct ata_port_info info_early = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
+		.pio_mask = ATA_PIO4,
 		.port_ops = &sl82c105_port_ops
 	};
 	/* for now use only the first port */
diff --git a/drivers/ata/pata_triflex.c b/drivers/ata/pata_triflex.c
index ef95975..f1f13ff 100644
--- a/drivers/ata/pata_triflex.c
+++ b/drivers/ata/pata_triflex.c
@@ -191,8 +191,8 @@ static int triflex_init_one(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	static const struct ata_port_info info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &triflex_port_ops
 	};
 	const struct ata_port_info *ppi[] = { &info, NULL };
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index ba556d3..b08e6e0 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -422,46 +422,46 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* Early VIA without UDMA support */
 	static const struct ata_port_info via_mwdma_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &via_port_ops
 	};
 	/* Ditto with IRQ masking required */
 	static const struct ata_port_info via_mwdma_info_borked = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.port_ops = &via_port_ops_noirq,
 	};
 	/* VIA UDMA 33 devices (and borked 66) */
 	static const struct ata_port_info via_udma33_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA2,
 		.port_ops = &via_port_ops
 	};
 	/* VIA UDMA 66 devices */
 	static const struct ata_port_info via_udma66_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA4,
 		.port_ops = &via_port_ops
 	};
 	/* VIA UDMA 100 devices */
 	static const struct ata_port_info via_udma100_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA5,
 		.port_ops = &via_port_ops
 	};
 	/* UDMA133 with bad AST (All current 133) */
 	static const struct ata_port_info via_udma133_info = {
 		.flags = ATA_FLAG_SLAVE_POSS,
-		.pio_mask = 0x1f,
-		.mwdma_mask = 0x07,
+		.pio_mask = ATA_PIO4,
+		.mwdma_mask = ATA_MWDMA2,
 		.udma_mask = ATA_UDMA6,	/* FIXME: should check north bridge */
 		.port_ops = &via_port_ops
 	};
diff --git a/drivers/ata/pata_winbond.c b/drivers/ata/pata_winbond.c
index 319e164..6d8619b 100644
--- a/drivers/ata/pata_winbond.c
+++ b/drivers/ata/pata_winbond.c
@@ -193,7 +193,7 @@ static __init int winbond_init_one(unsigned long port)
 		ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", cmd_port, ctl_port);
 
 		ap->ops = &winbond_port_ops;
-		ap->pio_mask = 0x1F;
+		ap->pio_mask = ATA_PIO4;
 		ap->flags |= ATA_FLAG_SLAVE_POSS;
 		ap->ioaddr.cmd_addr = cmd_addr;
 		ap->ioaddr.altstatus_addr = ctl_addr;
diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c
index be53545..3958817 100644
--- a/drivers/ata/pdc_adma.c
+++ b/drivers/ata/pdc_adma.c
@@ -148,6 +148,8 @@ static struct scsi_host_template adma_ata_sht = {
 static struct ata_port_operations adma_ata_ops = {
 	.inherits		= &ata_sff_port_ops,
 
+	.lost_interrupt		= ATA_OP_NULL,
+
 	.check_atapi_dma	= adma_check_atapi_dma,
 	.qc_prep		= adma_qc_prep,
 	.qc_issue		= adma_qc_issue,
@@ -166,7 +168,7 @@ static struct ata_port_info adma_port_info[] = {
 		.flags		= ATA_FLAG_SLAVE_POSS |
 				  ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO |
 				  ATA_FLAG_PIO_POLLING,
-		.pio_mask	= 0x10, /* pio4 */
+		.pio_mask	= ATA_PIO4_ONLY,
 		.udma_mask	= ATA_UDMA4,
 		.port_ops	= &adma_ata_ops,
 	},
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index 55bc88c..c2e90e1 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -1279,8 +1279,8 @@ static struct ata_port_operations sata_fsl_ops = {
 static const struct ata_port_info sata_fsl_port_info[] = {
 	{
 	 .flags = SATA_FSL_HOST_FLAGS,
-	 .pio_mask = 0x1f,	/* pio 0-4 */
-	 .udma_mask = 0x7f,	/* udma 0-6 */
+	 .pio_mask = ATA_PIO4,
+	 .udma_mask = ATA_UDMA6,
 	 .port_ops = &sata_fsl_ops,
 	 },
 };
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index fbbd87c..305a4f8 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -744,8 +744,8 @@ static struct ata_port_operations inic_port_ops = {
 
 static struct ata_port_info inic_port_info = {
 	.flags			= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA,
-	.pio_mask		= 0x1f,	/* pio0-4 */
-	.mwdma_mask		= 0x07, /* mwdma0-2 */
+	.pio_mask		= ATA_PIO4,
+	.mwdma_mask		= ATA_MWDMA2,
 	.udma_mask		= ATA_UDMA6,
 	.port_ops		= &inic_port_ops
 };
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 74b1080..a377226 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1,10 +1,13 @@
 /*
  * sata_mv.c - Marvell SATA support
  *
- * Copyright 2008: Marvell Corporation, all rights reserved.
+ * Copyright 2008-2009: Marvell Corporation, all rights reserved.
  * Copyright 2005: EMC Corporation, all rights reserved.
  * Copyright 2005 Red Hat, Inc.  All rights reserved.
  *
+ * Originally written by Brett Russ.
+ * Extensive overhaul and enhancement by Mark Lord <mlord@pobox.com>.
+ *
  * Please ALWAYS copy linux-ide@vger.kernel.org on emails.
  *
  * This program is free software; you can redistribute it and/or modify
@@ -25,20 +28,13 @@
 /*
  * sata_mv TODO list:
  *
- * --> Errata workaround for NCQ device errors.
- *
  * --> More errata workarounds for PCI-X.
  *
  * --> Complete a full errata audit for all chipsets to identify others.
  *
- * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it).
- *
  * --> Develop a low-power-consumption strategy, and implement it.
  *
- * --> [Experiment, low priority] Investigate interrupt coalescing.
- *       Quite often, especially with PCI Message Signalled Interrupts (MSI),
- *       the overhead reduced by interrupt mitigation is quite often not
- *       worth the latency cost.
+ * --> Add sysfs attributes for per-chip / per-HC IRQ coalescing thresholds.
  *
  * --> [Experiment, Marvell value added] Is it possible to use target
  *       mode to cross-connect two Linux boxes with Marvell cards?  If so,
@@ -68,7 +64,27 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"1.25"
+#define DRV_VERSION	"1.27"
+
+/*
+ * module options
+ */
+
+static int msi;
+#ifdef CONFIG_PCI
+module_param(msi, int, S_IRUGO);
+MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
+#endif
+
+static int irq_coalescing_io_count;
+module_param(irq_coalescing_io_count, int, S_IRUGO);
+MODULE_PARM_DESC(irq_coalescing_io_count,
+		 "IRQ coalescing I/O count threshold (0..255)");
+
+static int irq_coalescing_usecs;
+module_param(irq_coalescing_usecs, int, S_IRUGO);
+MODULE_PARM_DESC(irq_coalescing_usecs,
+		 "IRQ coalescing time threshold in usecs");
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */
@@ -79,13 +95,32 @@ enum {
 	MV_MAJOR_REG_AREA_SZ	= 0x10000,	/* 64KB */
 	MV_MINOR_REG_AREA_SZ	= 0x2000,	/* 8KB */
 
+	/* For use with both IRQ coalescing methods ("all ports" or "per-HC" */
+	COAL_CLOCKS_PER_USEC	= 150,		/* for calculating COAL_TIMEs */
+	MAX_COAL_TIME_THRESHOLD	= ((1 << 24) - 1), /* internal clocks count */
+	MAX_COAL_IO_COUNT	= 255,		/* completed I/O count */
+
 	MV_PCI_REG_BASE		= 0,
-	MV_IRQ_COAL_REG_BASE	= 0x18000,	/* 6xxx part only */
-	MV_IRQ_COAL_CAUSE		= (MV_IRQ_COAL_REG_BASE + 0x08),
-	MV_IRQ_COAL_CAUSE_LO		= (MV_IRQ_COAL_REG_BASE + 0x88),
-	MV_IRQ_COAL_CAUSE_HI		= (MV_IRQ_COAL_REG_BASE + 0x8c),
-	MV_IRQ_COAL_THRESHOLD		= (MV_IRQ_COAL_REG_BASE + 0xcc),
-	MV_IRQ_COAL_TIME_THRESHOLD	= (MV_IRQ_COAL_REG_BASE + 0xd0),
+
+	/*
+	 * Per-chip ("all ports") interrupt coalescing feature.
+	 * This is only for GEN_II / GEN_IIE hardware.
+	 *
+	 * Coalescing defers the interrupt until either the IO_THRESHOLD
+	 * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
+	 */
+	MV_COAL_REG_BASE	= 0x18000,
+	MV_IRQ_COAL_CAUSE	= (MV_COAL_REG_BASE + 0x08),
+	ALL_PORTS_COAL_IRQ	= (1 << 4),	/* all ports irq event */
+
+	MV_IRQ_COAL_IO_THRESHOLD   = (MV_COAL_REG_BASE + 0xcc),
+	MV_IRQ_COAL_TIME_THRESHOLD = (MV_COAL_REG_BASE + 0xd0),
+
+	/*
+	 * Registers for the (unused here) transaction coalescing feature:
+	 */
+	MV_TRAN_COAL_CAUSE_LO	= (MV_COAL_REG_BASE + 0x88),
+	MV_TRAN_COAL_CAUSE_HI	= (MV_COAL_REG_BASE + 0x8c),
 
 	MV_SATAHC0_REG_BASE	= 0x20000,
 	MV_FLASH_CTL_OFS	= 0x1046c,
@@ -117,17 +152,16 @@ enum {
 
 	/* Host Flags */
 	MV_FLAG_DUAL_HC		= (1 << 30),  /* two SATA Host Controllers */
-	MV_FLAG_IRQ_COALESCE	= (1 << 29),  /* IRQ coalescing capability */
 
 	MV_COMMON_FLAGS		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
-				  ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI |
-				  ATA_FLAG_PIO_POLLING,
+				  ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
+
+	MV_GEN_I_FLAGS		= MV_COMMON_FLAGS | ATA_FLAG_NO_ATAPI,
 
-	MV_6XXX_FLAGS		= MV_FLAG_IRQ_COALESCE,
+	MV_GEN_II_FLAGS		= MV_COMMON_FLAGS | ATA_FLAG_NCQ |
+				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA,
 
-	MV_GENIIE_FLAGS		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
-				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
-				  ATA_FLAG_NCQ | ATA_FLAG_AN,
+	MV_GEN_IIE_FLAGS	= MV_GEN_II_FLAGS | ATA_FLAG_AN,
 
 	CRQB_FLAG_READ		= (1 << 0),
 	CRQB_TAG_SHIFT		= 1,
@@ -180,16 +214,18 @@ enum {
 	PCI_HC_MAIN_IRQ_MASK_OFS  = 0x1d64,
 	SOC_HC_MAIN_IRQ_CAUSE_OFS = 0x20020,
 	SOC_HC_MAIN_IRQ_MASK_OFS  = 0x20024,
-	ERR_IRQ			= (1 << 0),	/* shift by port # */
-	DONE_IRQ		= (1 << 1),	/* shift by port # */
+	ERR_IRQ			= (1 << 0),	/* shift by (2 * port #) */
+	DONE_IRQ		= (1 << 1),	/* shift by (2 * port #) */
 	HC0_IRQ_PEND		= 0x1ff,	/* bits 0-8 = HC0's ports */
 	HC_SHIFT		= 9,		/* bits 9-17 = HC1's ports */
+	DONE_IRQ_0_3		= 0x000000aa,	/* DONE_IRQ ports 0,1,2,3 */
+	DONE_IRQ_4_7		= (DONE_IRQ_0_3 << HC_SHIFT),  /* 4,5,6,7 */
 	PCI_ERR			= (1 << 18),
-	TRAN_LO_DONE		= (1 << 19),	/* 6xxx: IRQ coalescing */
-	TRAN_HI_DONE		= (1 << 20),	/* 6xxx: IRQ coalescing */
-	PORTS_0_3_COAL_DONE	= (1 << 8),
-	PORTS_4_7_COAL_DONE	= (1 << 17),
-	PORTS_0_7_COAL_DONE	= (1 << 21),	/* 6xxx: IRQ coalescing */
+	TRAN_COAL_LO_DONE	= (1 << 19),	/* transaction coalescing */
+	TRAN_COAL_HI_DONE	= (1 << 20),	/* transaction coalescing */
+	PORTS_0_3_COAL_DONE	= (1 << 8),	/* HC0 IRQ coalescing */
+	PORTS_4_7_COAL_DONE	= (1 << 17),	/* HC1 IRQ coalescing */
+	ALL_PORTS_COAL_DONE	= (1 << 21),	/* GEN_II(E) IRQ coalescing */
 	GPIO_INT		= (1 << 22),
 	SELF_INT		= (1 << 23),
 	TWSI_INT		= (1 << 24),
@@ -205,6 +241,21 @@ enum {
 	HC_COAL_IRQ		= (1 << 4),	/* IRQ coalescing */
 	DEV_IRQ			= (1 << 8),	/* shift by port # */
 
+	/*
+	 * Per-HC (Host-Controller) interrupt coalescing feature.
+	 * This is present on all chip generations.
+	 *
+	 * Coalescing defers the interrupt until either the IO_THRESHOLD
+	 * (count of completed I/Os) is met, or the TIME_THRESHOLD is met.
+	 */
+	HC_IRQ_COAL_IO_THRESHOLD_OFS	= 0x000c,
+	HC_IRQ_COAL_TIME_THRESHOLD_OFS	= 0x0010,
+
+	SOC_LED_CTRL_OFS	= 0x2c,
+	SOC_LED_CTRL_BLINK	= (1 << 0),	/* Active LED blink */
+	SOC_LED_CTRL_ACT_PRESENCE = (1 << 2),	/* Multiplex dev presence */
+						/*  with dev activity LED */
+
 	/* Shadow block registers */
 	SHD_BLK_OFS		= 0x100,
 	SHD_CTL_AST_OFS		= 0x20,		/* ofs from SHD_BLK_OFS */
@@ -346,6 +397,12 @@ enum {
 	EDMA_ARB_CFG_OFS	= 0x38,
 
 	EDMA_HALTCOND_OFS	= 0x60,		/* GenIIe halt conditions */
+	EDMA_UNKNOWN_RSVD_OFS	= 0x6C,		/* GenIIe unknown/reserved */
+
+	BMDMA_CMD_OFS		= 0x224,	/* bmdma command register */
+	BMDMA_STATUS_OFS	= 0x228,	/* bmdma status register */
+	BMDMA_PRD_LOW_OFS	= 0x22c,	/* bmdma PRD addr 31:0 */
+	BMDMA_PRD_HIGH_OFS	= 0x230,	/* bmdma PRD addr 63:32 */
 
 	/* Host private flags (hp_flags) */
 	MV_HP_FLAG_MSI		= (1 << 0),
@@ -359,12 +416,14 @@ enum {
 	MV_HP_PCIE		= (1 << 9),	/* PCIe bus/regs: 7042 */
 	MV_HP_CUT_THROUGH	= (1 << 10),	/* can use EDMA cut-through */
 	MV_HP_FLAG_SOC		= (1 << 11),	/* SystemOnChip, no PCI */
+	MV_HP_QUIRK_LED_BLINK_EN = (1 << 12),	/* is led blinking enabled? */
 
 	/* Port private flags (pp_flags) */
 	MV_PP_FLAG_EDMA_EN	= (1 << 0),	/* is EDMA engine enabled? */
 	MV_PP_FLAG_NCQ_EN	= (1 << 1),	/* is EDMA set up for NCQ? */
 	MV_PP_FLAG_FBS_EN	= (1 << 2),	/* is EDMA set up for FBS? */
 	MV_PP_FLAG_DELAYED_EH	= (1 << 3),	/* delayed dev err handling */
+	MV_PP_FLAG_FAKE_ATA_BUSY = (1 << 4),	/* ignore initial ATA_DRDY */
 };
 
 #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I)
@@ -433,6 +492,18 @@ struct mv_sg {
 	__le32			reserved;
 };
 
+/*
+ * We keep a local cache of a few frequently accessed port
+ * registers here, to avoid having to read them (very slow)
+ * when switching between EDMA and non-EDMA modes.
+ */
+struct mv_cached_regs {
+	u32			fiscfg;
+	u32			ltmode;
+	u32			haltcond;
+	u32			unknown_rsvd;
+};
+
 struct mv_port_priv {
 	struct mv_crqb		*crqb;
 	dma_addr_t		crqb_dma;
@@ -445,6 +516,7 @@ struct mv_port_priv {
 	unsigned int		resp_idx;
 
 	u32			pp_flags;
+	struct mv_cached_regs	cached;
 	unsigned int		delayed_eh_pmp_map;
 };
 
@@ -535,7 +607,7 @@ static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
 			     unsigned int port_no);
 static int mv_stop_edma(struct ata_port *ap);
 static int mv_stop_edma_engine(void __iomem *port_mmio);
-static void mv_edma_cfg(struct ata_port *ap, int want_ncq);
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma);
 
 static void mv_pmp_select(struct ata_port *ap, int pmp);
 static int mv_pmp_hardreset(struct ata_link *link, unsigned int *class,
@@ -546,6 +618,14 @@ static void mv_pmp_error_handler(struct ata_port *ap);
 static void mv_process_crpb_entries(struct ata_port *ap,
 					struct mv_port_priv *pp);
 
+static void mv_sff_irq_clear(struct ata_port *ap);
+static int mv_check_atapi_dma(struct ata_queued_cmd *qc);
+static void mv_bmdma_setup(struct ata_queued_cmd *qc);
+static void mv_bmdma_start(struct ata_queued_cmd *qc);
+static void mv_bmdma_stop(struct ata_queued_cmd *qc);
+static u8   mv_bmdma_status(struct ata_port *ap);
+static u8 mv_sff_check_status(struct ata_port *ap);
+
 /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below
  * because we have to allow room for worst case splitting of
  * PRDs for 64K boundaries in mv_fill_sg().
@@ -566,6 +646,8 @@ static struct scsi_host_template mv6_sht = {
 static struct ata_port_operations mv5_ops = {
 	.inherits		= &ata_sff_port_ops,
 
+	.lost_interrupt		= ATA_OP_NULL,
+
 	.qc_defer		= mv_qc_defer,
 	.qc_prep		= mv_qc_prep,
 	.qc_issue		= mv_qc_issue,
@@ -593,6 +675,14 @@ static struct ata_port_operations mv6_ops = {
 	.pmp_softreset		= mv_softreset,
 	.softreset		= mv_softreset,
 	.error_handler		= mv_pmp_error_handler,
+
+	.sff_check_status	= mv_sff_check_status,
+	.sff_irq_clear		= mv_sff_irq_clear,
+	.check_atapi_dma	= mv_check_atapi_dma,
+	.bmdma_setup		= mv_bmdma_setup,
+	.bmdma_start		= mv_bmdma_start,
+	.bmdma_stop		= mv_bmdma_stop,
+	.bmdma_status		= mv_bmdma_status,
 };
 
 static struct ata_port_operations mv_iie_ops = {
@@ -603,53 +693,49 @@ static struct ata_port_operations mv_iie_ops = {
 
 static const struct ata_port_info mv_port_info[] = {
 	{  /* chip_504x */
-		.flags		= MV_COMMON_FLAGS,
+		.flags		= MV_GEN_I_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_508x */
-		.flags		= MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
+		.flags		= MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_5080 */
-		.flags		= MV_COMMON_FLAGS | MV_FLAG_DUAL_HC,
+		.flags		= MV_GEN_I_FLAGS | MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv5_ops,
 	},
 	{  /* chip_604x */
-		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
-				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
-				  ATA_FLAG_NCQ,
+		.flags		= MV_GEN_II_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_608x */
-		.flags		= MV_COMMON_FLAGS | MV_6XXX_FLAGS |
-				  ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA |
-				  ATA_FLAG_NCQ | MV_FLAG_DUAL_HC,
+		.flags		= MV_GEN_II_FLAGS | MV_FLAG_DUAL_HC,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv6_ops,
 	},
 	{  /* chip_6042 */
-		.flags		= MV_GENIIE_FLAGS,
+		.flags		= MV_GEN_IIE_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_7042 */
-		.flags		= MV_GENIIE_FLAGS,
+		.flags		= MV_GEN_IIE_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
 	},
 	{  /* chip_soc */
-		.flags		= MV_GENIIE_FLAGS,
+		.flags		= MV_GEN_IIE_FLAGS,
 		.pio_mask	= 0x1f,	/* pio0-4 */
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &mv_iie_ops,
@@ -794,6 +880,44 @@ static inline int mv_get_hc_count(unsigned long port_flags)
 	return ((port_flags & MV_FLAG_DUAL_HC) ? 2 : 1);
 }
 
+/**
+ *      mv_save_cached_regs - (re-)initialize cached port registers
+ *      @ap: the port whose registers we are caching
+ *
+ *	Initialize the local cache of port registers,
+ *	so that reading them over and over again can
+ *	be avoided on the hotter paths of this driver.
+ *	This saves a few microseconds each time we switch
+ *	to/from EDMA mode to perform (eg.) a drive cache flush.
+ */
+static void mv_save_cached_regs(struct ata_port *ap)
+{
+	void __iomem *port_mmio = mv_ap_base(ap);
+	struct mv_port_priv *pp = ap->private_data;
+
+	pp->cached.fiscfg = readl(port_mmio + FISCFG_OFS);
+	pp->cached.ltmode = readl(port_mmio + LTMODE_OFS);
+	pp->cached.haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
+	pp->cached.unknown_rsvd = readl(port_mmio + EDMA_UNKNOWN_RSVD_OFS);
+}
+
+/**
+ *      mv_write_cached_reg - write to a cached port register
+ *      @addr: hardware address of the register
+ *      @old: pointer to cached value of the register
+ *      @new: new value for the register
+ *
+ *	Write a new value to a cached register,
+ *	but only if the value is different from before.
+ */
+static inline void mv_write_cached_reg(void __iomem *addr, u32 *old, u32 new)
+{
+	if (new != *old) {
+		*old = new;
+		writel(new, addr);
+	}
+}
+
 static void mv_set_edma_ptrs(void __iomem *port_mmio,
 			     struct mv_host_priv *hpriv,
 			     struct mv_port_priv *pp)
@@ -825,6 +949,23 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio,
 		 port_mmio + EDMA_RSP_Q_OUT_PTR_OFS);
 }
 
+static void mv_write_main_irq_mask(u32 mask, struct mv_host_priv *hpriv)
+{
+	/*
+	 * When writing to the main_irq_mask in hardware,
+	 * we must ensure exclusivity between the interrupt coalescing bits
+	 * and the corresponding individual port DONE_IRQ bits.
+	 *
+	 * Note that this register is really an "IRQ enable" register,
+	 * not an "IRQ mask" register as Marvell's naming might suggest.
+	 */
+	if (mask & (ALL_PORTS_COAL_DONE | PORTS_0_3_COAL_DONE))
+		mask &= ~DONE_IRQ_0_3;
+	if (mask & (ALL_PORTS_COAL_DONE | PORTS_4_7_COAL_DONE))
+		mask &= ~DONE_IRQ_4_7;
+	writelfl(mask, hpriv->main_irq_mask_addr);
+}
+
 static void mv_set_main_irq_mask(struct ata_host *host,
 				 u32 disable_bits, u32 enable_bits)
 {
@@ -835,7 +976,7 @@ static void mv_set_main_irq_mask(struct ata_host *host,
 	new_mask = (old_mask & ~disable_bits) | enable_bits;
 	if (new_mask != old_mask) {
 		hpriv->main_irq_mask = new_mask;
-		writelfl(new_mask, hpriv->main_irq_mask_addr);
+		mv_write_main_irq_mask(new_mask, hpriv);
 	}
 }
 
@@ -852,8 +993,94 @@ static void mv_enable_port_irqs(struct ata_port *ap,
 	mv_set_main_irq_mask(ap->host, disable_bits, enable_bits);
 }
 
+static void mv_clear_and_enable_port_irqs(struct ata_port *ap,
+					  void __iomem *port_mmio,
+					  unsigned int port_irqs)
+{
+	struct mv_host_priv *hpriv = ap->host->private_data;
+	int hardport = mv_hardport_from_port(ap->port_no);
+	void __iomem *hc_mmio = mv_hc_base_from_port(
+				mv_host_base(ap->host), ap->port_no);
+	u32 hc_irq_cause;
+
+	/* clear EDMA event indicators, if any */
+	writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
+
+	/* clear pending irq events */
+	hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
+	writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
+
+	/* clear FIS IRQ Cause */
+	if (IS_GEN_IIE(hpriv))
+		writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+
+	mv_enable_port_irqs(ap, port_irqs);
+}
+
+static void mv_set_irq_coalescing(struct ata_host *host,
+				  unsigned int count, unsigned int usecs)
+{
+	struct mv_host_priv *hpriv = host->private_data;
+	void __iomem *mmio = hpriv->base, *hc_mmio;
+	u32 coal_enable = 0;
+	unsigned long flags;
+	unsigned int clks, is_dual_hc = hpriv->n_ports > MV_PORTS_PER_HC;
+	const u32 coal_disable = PORTS_0_3_COAL_DONE | PORTS_4_7_COAL_DONE |
+							ALL_PORTS_COAL_DONE;
+
+	/* Disable IRQ coalescing if either threshold is zero */
+	if (!usecs || !count) {
+		clks = count = 0;
+	} else {
+		/* Respect maximum limits of the hardware */
+		clks = usecs * COAL_CLOCKS_PER_USEC;
+		if (clks > MAX_COAL_TIME_THRESHOLD)
+			clks = MAX_COAL_TIME_THRESHOLD;
+		if (count > MAX_COAL_IO_COUNT)
+			count = MAX_COAL_IO_COUNT;
+	}
+
+	spin_lock_irqsave(&host->lock, flags);
+	mv_set_main_irq_mask(host, coal_disable, 0);
+
+	if (is_dual_hc && !IS_GEN_I(hpriv)) {
+		/*
+		 * GEN_II/GEN_IIE with dual host controllers:
+		 * one set of global thresholds for the entire chip.
+		 */
+		writel(clks,  mmio + MV_IRQ_COAL_TIME_THRESHOLD);
+		writel(count, mmio + MV_IRQ_COAL_IO_THRESHOLD);
+		/* clear leftover coal IRQ bit */
+		writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE);
+		if (count)
+			coal_enable = ALL_PORTS_COAL_DONE;
+		clks = count = 0; /* force clearing of regular regs below */
+	}
+
+	/*
+	 * All chips: independent thresholds for each HC on the chip.
+	 */
+	hc_mmio = mv_hc_base_from_port(mmio, 0);
+	writel(clks,  hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS);
+	writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS);
+	writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS);
+	if (count)
+		coal_enable |= PORTS_0_3_COAL_DONE;
+	if (is_dual_hc) {
+		hc_mmio = mv_hc_base_from_port(mmio, MV_PORTS_PER_HC);
+		writel(clks,  hc_mmio + HC_IRQ_COAL_TIME_THRESHOLD_OFS);
+		writel(count, hc_mmio + HC_IRQ_COAL_IO_THRESHOLD_OFS);
+		writel(~HC_COAL_IRQ, hc_mmio + HC_IRQ_CAUSE_OFS);
+		if (count)
+			coal_enable |= PORTS_4_7_COAL_DONE;
+	}
+
+	mv_set_main_irq_mask(host, 0, coal_enable);
+	spin_unlock_irqrestore(&host->lock, flags);
+}
+
 /**
- *      mv_start_dma - Enable eDMA engine
+ *      mv_start_edma - Enable eDMA engine
  *      @base: port base address
  *      @pp: port private data
  *
@@ -863,7 +1090,7 @@ static void mv_enable_port_irqs(struct ata_port *ap,
  *      LOCKING:
  *      Inherited from caller.
  */
-static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
+static void mv_start_edma(struct ata_port *ap, void __iomem *port_mmio,
 			 struct mv_port_priv *pp, u8 protocol)
 {
 	int want_ncq = (protocol == ATA_PROT_NCQ);
@@ -875,26 +1102,11 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio,
 	}
 	if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN)) {
 		struct mv_host_priv *hpriv = ap->host->private_data;
-		int hardport = mv_hardport_from_port(ap->port_no);
-		void __iomem *hc_mmio = mv_hc_base_from_port(
-					mv_host_base(ap->host), ap->port_no);
-		u32 hc_irq_cause;
-
-		/* clear EDMA event indicators, if any */
-		writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
 
-		/* clear pending irq events */
-		hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport);
-		writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS);
-
-		mv_edma_cfg(ap, want_ncq);
-
-		/* clear FIS IRQ Cause */
-		if (IS_GEN_IIE(hpriv))
-			writelfl(0, port_mmio + SATA_FIS_IRQ_CAUSE_OFS);
+		mv_edma_cfg(ap, want_ncq, 1);
 
 		mv_set_edma_ptrs(port_mmio, hpriv, pp);
-		mv_enable_port_irqs(ap, DONE_IRQ|ERR_IRQ);
+		mv_clear_and_enable_port_irqs(ap, port_mmio, DONE_IRQ|ERR_IRQ);
 
 		writelfl(EDMA_EN, port_mmio + EDMA_CMD_OFS);
 		pp->pp_flags |= MV_PP_FLAG_EDMA_EN;
@@ -952,6 +1164,7 @@ static int mv_stop_edma(struct ata_port *ap)
 {
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
+	int err = 0;
 
 	if (!(pp->pp_flags & MV_PP_FLAG_EDMA_EN))
 		return 0;
@@ -959,9 +1172,10 @@ static int mv_stop_edma(struct ata_port *ap)
 	mv_wait_for_edma_empty_idle(ap);
 	if (mv_stop_edma_engine(port_mmio)) {
 		ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
-		return -EIO;
+		err = -EIO;
 	}
-	return 0;
+	mv_edma_cfg(ap, 0, 0);
+	return err;
 }
 
 #ifdef ATA_DEBUG
@@ -1130,35 +1344,33 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	return ATA_DEFER_PORT;
 }
 
-static void mv_config_fbs(void __iomem *port_mmio, int want_ncq, int want_fbs)
+static void mv_config_fbs(struct ata_port *ap, int want_ncq, int want_fbs)
 {
-	u32 new_fiscfg, old_fiscfg;
-	u32 new_ltmode, old_ltmode;
-	u32 new_haltcond, old_haltcond;
+	struct mv_port_priv *pp = ap->private_data;
+	void __iomem *port_mmio;
 
-	old_fiscfg   = readl(port_mmio + FISCFG_OFS);
-	old_ltmode   = readl(port_mmio + LTMODE_OFS);
-	old_haltcond = readl(port_mmio + EDMA_HALTCOND_OFS);
+	u32 fiscfg,   *old_fiscfg   = &pp->cached.fiscfg;
+	u32 ltmode,   *old_ltmode   = &pp->cached.ltmode;
+	u32 haltcond, *old_haltcond = &pp->cached.haltcond;
 
-	new_fiscfg   = old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
-	new_ltmode   = old_ltmode & ~LTMODE_BIT8;
-	new_haltcond = old_haltcond | EDMA_ERR_DEV;
+	ltmode   = *old_ltmode & ~LTMODE_BIT8;
+	haltcond = *old_haltcond | EDMA_ERR_DEV;
 
 	if (want_fbs) {
-		new_fiscfg = old_fiscfg | FISCFG_SINGLE_SYNC;
-		new_ltmode = old_ltmode | LTMODE_BIT8;
+		fiscfg = *old_fiscfg | FISCFG_SINGLE_SYNC;
+		ltmode = *old_ltmode | LTMODE_BIT8;
 		if (want_ncq)
-			new_haltcond &= ~EDMA_ERR_DEV;
+			haltcond &= ~EDMA_ERR_DEV;
 		else
-			new_fiscfg |=  FISCFG_WAIT_DEV_ERR;
+			fiscfg |=  FISCFG_WAIT_DEV_ERR;
+	} else {
+		fiscfg = *old_fiscfg & ~(FISCFG_SINGLE_SYNC | FISCFG_WAIT_DEV_ERR);
 	}
 
-	if (new_fiscfg != old_fiscfg)
-		writelfl(new_fiscfg, port_mmio + FISCFG_OFS);
-	if (new_ltmode != old_ltmode)
-		writelfl(new_ltmode, port_mmio + LTMODE_OFS);
-	if (new_haltcond != old_haltcond)
-		writelfl(new_haltcond, port_mmio + EDMA_HALTCOND_OFS);
+	port_mmio = mv_ap_base(ap);
+	mv_write_cached_reg(port_mmio + FISCFG_OFS, old_fiscfg, fiscfg);
+	mv_write_cached_reg(port_mmio + LTMODE_OFS, old_ltmode, ltmode);
+	mv_write_cached_reg(port_mmio + EDMA_HALTCOND_OFS, old_haltcond, haltcond);
 }
 
 static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
@@ -1176,7 +1388,86 @@ static void mv_60x1_errata_sata25(struct ata_port *ap, int want_ncq)
 		writel(new, hpriv->base + MV_GPIO_PORT_CTL_OFS);
 }
 
-static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
+/**
+ *	mv_bmdma_enable - set a magic bit on GEN_IIE to allow bmdma
+ *	@ap: Port being initialized
+ *
+ *	There are two DMA modes on these chips:  basic DMA, and EDMA.
+ *
+ *	Bit-0 of the "EDMA RESERVED" register enables/disables use
+ *	of basic DMA on the GEN_IIE versions of the chips.
+ *
+ *	This bit survives EDMA resets, and must be set for basic DMA
+ *	to function, and should be cleared when EDMA is active.
+ */
+static void mv_bmdma_enable_iie(struct ata_port *ap, int enable_bmdma)
+{
+	struct mv_port_priv *pp = ap->private_data;
+	u32 new, *old = &pp->cached.unknown_rsvd;
+
+	if (enable_bmdma)
+		new = *old | 1;
+	else
+		new = *old & ~1;
+	mv_write_cached_reg(mv_ap_base(ap) + EDMA_UNKNOWN_RSVD_OFS, old, new);
+}
+
+/*
+ * SOC chips have an issue whereby the HDD LEDs don't always blink
+ * during I/O when NCQ is enabled. Enabling a special "LED blink" mode
+ * of the SOC takes care of it, generating a steady blink rate when
+ * any drive on the chip is active.
+ *
+ * Unfortunately, the blink mode is a global hardware setting for the SOC,
+ * so we must use it whenever at least one port on the SOC has NCQ enabled.
+ *
+ * We turn "LED blink" off when NCQ is not in use anywhere, because the normal
+ * LED operation works then, and provides better (more accurate) feedback.
+ *
+ * Note that this code assumes that an SOC never has more than one HC onboard.
+ */
+static void mv_soc_led_blink_enable(struct ata_port *ap)
+{
+	struct ata_host *host = ap->host;
+	struct mv_host_priv *hpriv = host->private_data;
+	void __iomem *hc_mmio;
+	u32 led_ctrl;
+
+	if (hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN)
+		return;
+	hpriv->hp_flags |= MV_HP_QUIRK_LED_BLINK_EN;
+	hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no);
+	led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS);
+	writel(led_ctrl | SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS);
+}
+
+static void mv_soc_led_blink_disable(struct ata_port *ap)
+{
+	struct ata_host *host = ap->host;
+	struct mv_host_priv *hpriv = host->private_data;
+	void __iomem *hc_mmio;
+	u32 led_ctrl;
+	unsigned int port;
+
+	if (!(hpriv->hp_flags & MV_HP_QUIRK_LED_BLINK_EN))
+		return;
+
+	/* disable led-blink only if no ports are using NCQ */
+	for (port = 0; port < hpriv->n_ports; port++) {
+		struct ata_port *this_ap = host->ports[port];
+		struct mv_port_priv *pp = this_ap->private_data;
+
+		if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
+			return;
+	}
+
+	hpriv->hp_flags &= ~MV_HP_QUIRK_LED_BLINK_EN;
+	hc_mmio = mv_hc_base_from_port(mv_host_base(host), ap->port_no);
+	led_ctrl = readl(hc_mmio + SOC_LED_CTRL_OFS);
+	writel(led_ctrl & ~SOC_LED_CTRL_BLINK, hc_mmio + SOC_LED_CTRL_OFS);
+}
+
+static void mv_edma_cfg(struct ata_port *ap, int want_ncq, int want_edma)
 {
 	u32 cfg;
 	struct mv_port_priv *pp    = ap->private_data;
@@ -1185,7 +1476,8 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
 
 	/* set up non-NCQ EDMA configuration */
 	cfg = EDMA_CFG_Q_DEPTH;		/* always 0x1f for *all* chips */
-	pp->pp_flags &= ~MV_PP_FLAG_FBS_EN;
+	pp->pp_flags &=
+	  ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY);
 
 	if (IS_GEN_I(hpriv))
 		cfg |= (1 << 8);	/* enab config burst size mask */
@@ -1206,7 +1498,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
 		 */
 		want_fbs &= want_ncq;
 
-		mv_config_fbs(port_mmio, want_ncq, want_fbs);
+		mv_config_fbs(ap, want_ncq, want_fbs);
 
 		if (want_fbs) {
 			pp->pp_flags |= MV_PP_FLAG_FBS_EN;
@@ -1214,18 +1506,27 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq)
 		}
 
 		cfg |= (1 << 23);	/* do not mask PM field in rx'd FIS */
-		cfg |= (1 << 22);	/* enab 4-entry host queue cache */
-		if (!IS_SOC(hpriv))
-			cfg |= (1 << 18);	/* enab early completion */
+		if (want_edma) {
+			cfg |= (1 << 22); /* enab 4-entry host queue cache */
+			if (!IS_SOC(hpriv))
+				cfg |= (1 << 18); /* enab early completion */
+		}
 		if (hpriv->hp_flags & MV_HP_CUT_THROUGH)
 			cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */
+		mv_bmdma_enable_iie(ap, !want_edma);
+
+		if (IS_SOC(hpriv)) {
+			if (want_ncq)
+				mv_soc_led_blink_enable(ap);
+			else
+				mv_soc_led_blink_disable(ap);
+		}
 	}
 
 	if (want_ncq) {
 		cfg |= EDMA_CFG_NCQ;
 		pp->pp_flags |=  MV_PP_FLAG_NCQ_EN;
-	} else
-		pp->pp_flags &= ~MV_PP_FLAG_NCQ_EN;
+	}
 
 	writelfl(cfg, port_mmio + EDMA_CFG_OFS);
 }
@@ -1309,6 +1610,8 @@ static int mv_port_start(struct ata_port *ap)
 			pp->sg_tbl_dma[tag] = pp->sg_tbl_dma[0];
 		}
 	}
+	mv_save_cached_regs(ap);
+	mv_edma_cfg(ap, 0, 0);
 	return 0;
 
 out_port_free_dma_mem:
@@ -1357,12 +1660,13 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 			u32 offset = addr & 0xffff;
 			u32 len = sg_len;
 
-			if ((offset + sg_len > 0x10000))
+			if (offset + len > 0x10000)
 				len = 0x10000 - offset;
 
 			mv_sg->addr = cpu_to_le32(addr & 0xffffffff);
 			mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16);
 			mv_sg->flags_size = cpu_to_le32(len & 0xffff);
+			mv_sg->reserved = 0;
 
 			sg_len -= len;
 			addr += len;
@@ -1374,6 +1678,7 @@ static void mv_fill_sg(struct ata_queued_cmd *qc)
 
 	if (likely(last_sg))
 		last_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL);
+	mb(); /* ensure data structure is visible to the chipset */
 }
 
 static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
@@ -1384,6 +1689,147 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last)
 }
 
 /**
+ *	mv_sff_irq_clear - Clear hardware interrupt after DMA.
+ *	@ap: Port associated with this ATA transaction.
+ *
+ *	We need this only for ATAPI bmdma transactions,
+ *	as otherwise we experience spurious interrupts
+ *	after libata-sff handles the bmdma interrupts.
+ */
+static void mv_sff_irq_clear(struct ata_port *ap)
+{
+	mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ);
+}
+
+/**
+ *	mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA.
+ *	@qc: queued command to check for chipset/DMA compatibility.
+ *
+ *	The bmdma engines cannot handle speculative data sizes
+ *	(bytecount under/over flow).  So only allow DMA for
+ *	data transfer commands with known data sizes.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static int mv_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+	struct scsi_cmnd *scmd = qc->scsicmd;
+
+	if (scmd) {
+		switch (scmd->cmnd[0]) {
+		case READ_6:
+		case READ_10:
+		case READ_12:
+		case WRITE_6:
+		case WRITE_10:
+		case WRITE_12:
+		case GPCMD_READ_CD:
+		case GPCMD_SEND_DVD_STRUCTURE:
+		case GPCMD_SEND_CUE_SHEET:
+			return 0; /* DMA is safe */
+		}
+	}
+	return -EOPNOTSUPP; /* use PIO instead */
+}
+
+/**
+ *	mv_bmdma_setup - Set up BMDMA transaction
+ *	@qc: queued command to prepare DMA for.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static void mv_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *port_mmio = mv_ap_base(ap);
+	struct mv_port_priv *pp = ap->private_data;
+
+	mv_fill_sg(qc);
+
+	/* clear all DMA cmd bits */
+	writel(0, port_mmio + BMDMA_CMD_OFS);
+
+	/* load PRD table addr. */
+	writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16,
+		port_mmio + BMDMA_PRD_HIGH_OFS);
+	writelfl(pp->sg_tbl_dma[qc->tag],
+		port_mmio + BMDMA_PRD_LOW_OFS);
+
+	/* issue r/w command */
+	ap->ops->sff_exec_command(ap, &qc->tf);
+}
+
+/**
+ *	mv_bmdma_start - Start a BMDMA transaction
+ *	@qc: queued command to start DMA on.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static void mv_bmdma_start(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *port_mmio = mv_ap_base(ap);
+	unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE);
+	u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START;
+
+	/* start host DMA transaction */
+	writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
+}
+
+/**
+ *	mv_bmdma_stop - Stop BMDMA transfer
+ *	@qc: queued command to stop DMA on.
+ *
+ *	Clears the ATA_DMA_START flag in the bmdma control register
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static void mv_bmdma_stop(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	void __iomem *port_mmio = mv_ap_base(ap);
+	u32 cmd;
+
+	/* clear start/stop bit */
+	cmd = readl(port_mmio + BMDMA_CMD_OFS);
+	cmd &= ~ATA_DMA_START;
+	writelfl(cmd, port_mmio + BMDMA_CMD_OFS);
+
+	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
+	ata_sff_dma_pause(ap);
+}
+
+/**
+ *	mv_bmdma_status - Read BMDMA status
+ *	@ap: port for which to retrieve DMA status.
+ *
+ *	Read and return equivalent of the sff BMDMA status register.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ */
+static u8 mv_bmdma_status(struct ata_port *ap)
+{
+	void __iomem *port_mmio = mv_ap_base(ap);
+	u32 reg, status;
+
+	/*
+	 * Other bits are valid only if ATA_DMA_ACTIVE==0,
+	 * and the ATA_DMA_INTR bit doesn't exist.
+	 */
+	reg = readl(port_mmio + BMDMA_STATUS_OFS);
+	if (reg & ATA_DMA_ACTIVE)
+		status = ATA_DMA_ACTIVE;
+	else
+		status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR;
+	return status;
+}
+
+/**
  *      mv_qc_prep - Host specific command preparation.
  *      @qc: queued command to prepare
  *
@@ -1545,6 +1991,132 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
 }
 
 /**
+ *	mv_sff_check_status - fetch device status, if valid
+ *	@ap: ATA port to fetch status from
+ *
+ *	When using command issue via mv_qc_issue_fis(),
+ *	the initial ATA_BUSY state does not show up in the
+ *	ATA status (shadow) register.  This can confuse libata!
+ *
+ *	So we have a hook here to fake ATA_BUSY for that situation,
+ *	until the first time a BUSY, DRQ, or ERR bit is seen.
+ *
+ *	The rest of the time, it simply returns the ATA status register.
+ */
+static u8 mv_sff_check_status(struct ata_port *ap)
+{
+	u8 stat = ioread8(ap->ioaddr.status_addr);
+	struct mv_port_priv *pp = ap->private_data;
+
+	if (pp->pp_flags & MV_PP_FLAG_FAKE_ATA_BUSY) {
+		if (stat & (ATA_BUSY | ATA_DRQ | ATA_ERR))
+			pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY;
+		else
+			stat = ATA_BUSY;
+	}
+	return stat;
+}
+
+/**
+ *	mv_send_fis - Send a FIS, using the "Vendor-Unique FIS" register
+ *	@fis: fis to be sent
+ *	@nwords: number of 32-bit words in the fis
+ */
+static unsigned int mv_send_fis(struct ata_port *ap, u32 *fis, int nwords)
+{
+	void __iomem *port_mmio = mv_ap_base(ap);
+	u32 ifctl, old_ifctl, ifstat;
+	int i, timeout = 200, final_word = nwords - 1;
+
+	/* Initiate FIS transmission mode */
+	old_ifctl = readl(port_mmio + SATA_IFCTL_OFS);
+	ifctl = 0x100 | (old_ifctl & 0xf);
+	writelfl(ifctl, port_mmio + SATA_IFCTL_OFS);
+
+	/* Send all words of the FIS except for the final word */
+	for (i = 0; i < final_word; ++i)
+		writel(fis[i], port_mmio + VENDOR_UNIQUE_FIS_OFS);
+
+	/* Flag end-of-transmission, and then send the final word */
+	writelfl(ifctl | 0x200, port_mmio + SATA_IFCTL_OFS);
+	writelfl(fis[final_word], port_mmio + VENDOR_UNIQUE_FIS_OFS);
+
+	/*
+	 * Wait for FIS transmission to complete.
+	 * This typically takes just a single iteration.
+	 */
+	do {
+		ifstat = readl(port_mmio + SATA_IFSTAT_OFS);
+	} while (!(ifstat & 0x1000) && --timeout);
+
+	/* Restore original port configuration */
+	writelfl(old_ifctl, port_mmio + SATA_IFCTL_OFS);
+
+	/* See if it worked */
+	if ((ifstat & 0x3000) != 0x1000) {
+		ata_port_printk(ap, KERN_WARNING,
+				"%s transmission error, ifstat=%08x\n",
+				__func__, ifstat);
+		return AC_ERR_OTHER;
+	}
+	return 0;
+}
+
+/**
+ *	mv_qc_issue_fis - Issue a command directly as a FIS
+ *	@qc: queued command to start
+ *
+ *	Note that the ATA shadow registers are not updated
+ *	after command issue, so the device will appear "READY"
+ *	if polled, even while it is BUSY processing the command.
+ *
+ *	So we use a status hook to fake ATA_BUSY until the drive changes state.
+ *
+ *	Note: we don't get updated shadow regs on *completion*
+ *	of non-data commands. So avoid sending them via this function,
+ *	as they will appear to have completed immediately.
+ *
+ *	GEN_IIE has special registers that we could get the result tf from,
+ *	but earlier chipsets do not.  For now, we ignore those registers.
+ */
+static unsigned int mv_qc_issue_fis(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	struct mv_port_priv *pp = ap->private_data;
+	struct ata_link *link = qc->dev->link;
+	u32 fis[5];
+	int err = 0;
+
+	ata_tf_to_fis(&qc->tf, link->pmp, 1, (void *)fis);
+	err = mv_send_fis(ap, fis, sizeof(fis) / sizeof(fis[0]));
+	if (err)
+		return err;
+
+	switch (qc->tf.protocol) {
+	case ATAPI_PROT_PIO:
+		pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY;
+		/* fall through */
+	case ATAPI_PROT_NODATA:
+		ap->hsm_task_state = HSM_ST_FIRST;
+		break;
+	case ATA_PROT_PIO:
+		pp->pp_flags |= MV_PP_FLAG_FAKE_ATA_BUSY;
+		if (qc->tf.flags & ATA_TFLAG_WRITE)
+			ap->hsm_task_state = HSM_ST_FIRST;
+		else
+			ap->hsm_task_state = HSM_ST;
+		break;
+	default:
+		ap->hsm_task_state = HSM_ST_LAST;
+		break;
+	}
+
+	if (qc->tf.flags & ATA_TFLAG_POLLING)
+		ata_pio_queue_task(ap, qc, 0);
+	return 0;
+}
+
+/**
  *      mv_qc_issue - Initiate a command to the host
  *      @qc: queued command to start
  *
@@ -1558,14 +2130,28 @@ static void mv_qc_prep_iie(struct ata_queued_cmd *qc)
  */
 static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 {
+	static int limit_warnings = 10;
 	struct ata_port *ap = qc->ap;
 	void __iomem *port_mmio = mv_ap_base(ap);
 	struct mv_port_priv *pp = ap->private_data;
 	u32 in_index;
+	unsigned int port_irqs;
 
-	if ((qc->tf.protocol != ATA_PROT_DMA) &&
-	    (qc->tf.protocol != ATA_PROT_NCQ)) {
-		static int limit_warnings = 10;
+	pp->pp_flags &= ~MV_PP_FLAG_FAKE_ATA_BUSY; /* paranoia */
+
+	switch (qc->tf.protocol) {
+	case ATA_PROT_DMA:
+	case ATA_PROT_NCQ:
+		mv_start_edma(ap, port_mmio, pp, qc->tf.protocol);
+		pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
+		in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
+
+		/* Write the request in pointer to kick the EDMA to life */
+		writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
+					port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+		return 0;
+
+	case ATA_PROT_PIO:
 		/*
 		 * Errata SATA#16, SATA#24: warn if multiple DRQs expected.
 		 *
@@ -1583,27 +2169,46 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc)
 					": attempting PIO w/multiple DRQ: "
 					"this may fail due to h/w errata\n");
 		}
-		/*
-		 * We're about to send a non-EDMA capable command to the
-		 * port.  Turn off EDMA so there won't be problems accessing
-		 * shadow block, etc registers.
-		 */
-		mv_stop_edma(ap);
-		mv_enable_port_irqs(ap, ERR_IRQ);
-		mv_pmp_select(ap, qc->dev->link->pmp);
-		return ata_sff_qc_issue(qc);
+		/* drop through */
+	case ATA_PROT_NODATA:
+	case ATAPI_PROT_PIO:
+	case ATAPI_PROT_NODATA:
+		if (ap->flags & ATA_FLAG_PIO_POLLING)
+			qc->tf.flags |= ATA_TFLAG_POLLING;
+		break;
 	}
 
-	mv_start_dma(ap, port_mmio, pp, qc->tf.protocol);
-
-	pp->req_idx = (pp->req_idx + 1) & MV_MAX_Q_DEPTH_MASK;
-	in_index = pp->req_idx << EDMA_REQ_Q_PTR_SHIFT;
+	if (qc->tf.flags & ATA_TFLAG_POLLING)
+		port_irqs = ERR_IRQ;	/* mask device interrupt when polling */
+	else
+		port_irqs = ERR_IRQ | DONE_IRQ;	/* unmask all interrupts */
 
-	/* and write the request in pointer to kick the EDMA to life */
-	writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | in_index,
-		 port_mmio + EDMA_REQ_Q_IN_PTR_OFS);
+	/*
+	 * We're about to send a non-EDMA capable command to the
+	 * port.  Turn off EDMA so there won't be problems accessing
+	 * shadow block, etc registers.
+	 */
+	mv_stop_edma(ap);
+	mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), port_irqs);
+	mv_pmp_select(ap, qc->dev->link->pmp);
 
-	return 0;
+	if (qc->tf.command == ATA_CMD_READ_LOG_EXT) {
+		struct mv_host_priv *hpriv = ap->host->private_data;
+		/*
+		 * Workaround for 88SX60x1 FEr SATA#25 (part 2).
+		 *
+		 * After any NCQ error, the READ_LOG_EXT command
+		 * from libata-eh *must* use mv_qc_issue_fis().
+		 * Otherwise it might fail, due to chip errata.
+		 *
+		 * Rather than special-case it, we'll just *always*
+		 * use this method here for READ_LOG_EXT, making for
+		 * easier testing.
+		 */
+		if (IS_GEN_II(hpriv))
+			return mv_qc_issue_fis(qc);
+	}
+	return ata_sff_qc_issue(qc);
 }
 
 static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
@@ -1614,8 +2219,12 @@ static struct ata_queued_cmd *mv_get_active_qc(struct ata_port *ap)
 	if (pp->pp_flags & MV_PP_FLAG_NCQ_EN)
 		return NULL;
 	qc = ata_qc_from_tag(ap, ap->link.active_tag);
-	if (qc && (qc->tf.flags & ATA_TFLAG_POLLING))
-		qc = NULL;
+	if (qc) {
+		if (qc->tf.flags & ATA_TFLAG_POLLING)
+			qc = NULL;
+		else if (!(qc->flags & ATA_QCFLAG_ACTIVE))
+			qc = NULL;
+	}
 	return qc;
 }
 
@@ -2084,6 +2693,10 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
 	void __iomem *mmio = hpriv->base, *hc_mmio;
 	unsigned int handled = 0, port;
 
+	/* If asserted, clear the "all ports" IRQ coalescing bit */
+	if (main_irq_cause & ALL_PORTS_COAL_DONE)
+		writel(~ALL_PORTS_COAL_IRQ, mmio + MV_IRQ_COAL_CAUSE);
+
 	for (port = 0; port < hpriv->n_ports; port++) {
 		struct ata_port *ap = host->ports[port];
 		unsigned int p, shift, hardport, port_cause;
@@ -2116,6 +2729,8 @@ static int mv_host_intr(struct ata_host *host, u32 main_irq_cause)
 			 * to ack (only) those ports via hc_irq_cause.
 			 */
 			ack_irqs = 0;
+			if (hc_cause & PORTS_0_3_COAL_DONE)
+				ack_irqs = HC_COAL_IRQ;
 			for (p = 0; p < MV_PORTS_PER_HC; ++p) {
 				if ((port + p) >= hpriv->n_ports)
 					break;
@@ -2204,7 +2819,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 
 	/* for MSI:  block new interrupts while in here */
 	if (using_msi)
-		writel(0, hpriv->main_irq_mask_addr);
+		mv_write_main_irq_mask(0, hpriv);
 
 	main_irq_cause = readl(hpriv->main_irq_cause_addr);
 	pending_irqs   = main_irq_cause & hpriv->main_irq_mask;
@@ -2221,7 +2836,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance)
 
 	/* for MSI: unmask; interrupt cause bits will retrigger now */
 	if (using_msi)
-		writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr);
+		mv_write_main_irq_mask(hpriv->main_irq_mask, hpriv);
 
 	spin_unlock(&host->lock);
 
@@ -2774,6 +3389,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 
 	mv_reset_channel(hpriv, mmio, ap->port_no);
 	pp->pp_flags &= ~MV_PP_FLAG_EDMA_EN;
+	pp->pp_flags &=
+	  ~(MV_PP_FLAG_FBS_EN | MV_PP_FLAG_NCQ_EN | MV_PP_FLAG_FAKE_ATA_BUSY);
 
 	/* Workaround for errata FEr SATA#10 (part 2) */
 	do {
@@ -2793,6 +3410,8 @@ static int mv_hardreset(struct ata_link *link, unsigned int *class,
 				extra = HZ; /* only extend it once, max */
 		}
 	} while (sstatus != 0x0 && sstatus != 0x113 && sstatus != 0x123);
+	mv_save_cached_regs(ap);
+	mv_edma_cfg(ap, 0, 0);
 
 	return rc;
 }
@@ -3126,6 +3745,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
 	 * The per-port interrupts get done later as ports are set up.
 	 */
 	mv_set_main_irq_mask(host, 0, PCI_ERR);
+	mv_set_irq_coalescing(host, irq_coalescing_io_count,
+				    irq_coalescing_usecs);
 done:
 	return rc;
 }
@@ -3287,12 +3908,6 @@ static struct pci_driver mv_pci_driver = {
 	.remove			= ata_pci_remove_one,
 };
 
-/*
- * module options
- */
-static int msi;	      /* Use PCI msi; either zero (off, default) or non-zero */
-
-
 /* move to PCI layer or libata core? */
 static int pci_go_64(struct pci_dev *pdev)
 {
@@ -3474,10 +4089,5 @@ MODULE_DEVICE_TABLE(pci, mv_pci_tbl);
 MODULE_VERSION(DRV_VERSION);
 MODULE_ALIAS("platform:" DRV_NAME);
 
-#ifdef CONFIG_PCI
-module_param(msi, int, 0444);
-MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)");
-#endif
-
 module_init(mv_init);
 module_exit(mv_exit);
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index f65b537..6cda12b 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -57,9 +57,9 @@ enum {
 	NV_MMIO_BAR			= 5,
 
 	NV_PORTS			= 2,
-	NV_PIO_MASK			= 0x1f,
-	NV_MWDMA_MASK			= 0x07,
-	NV_UDMA_MASK			= 0x7f,
+	NV_PIO_MASK			= ATA_PIO4,
+	NV_MWDMA_MASK			= ATA_MWDMA2,
+	NV_UDMA_MASK			= ATA_UDMA6,
 	NV_PORT0_SCR_REG_OFFSET		= 0x00,
 	NV_PORT1_SCR_REG_OFFSET		= 0x40,
 
@@ -408,6 +408,7 @@ static struct scsi_host_template nv_swncq_sht = {
 
 static struct ata_port_operations nv_common_ops = {
 	.inherits		= &ata_bmdma_port_ops,
+	.lost_interrupt		= ATA_OP_NULL,
 	.scr_read		= nv_scr_read,
 	.scr_write		= nv_scr_write,
 };
diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index ba9a257..b1fd7d6 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -176,7 +176,9 @@ static const struct ata_port_operations pdc_common_ops = {
 	.check_atapi_dma	= pdc_check_atapi_dma,
 	.qc_prep		= pdc_qc_prep,
 	.qc_issue		= pdc_qc_issue,
+
 	.sff_irq_clear		= pdc_irq_clear,
+	.lost_interrupt		= ATA_OP_NULL,
 
 	.post_internal_cmd	= pdc_post_internal_cmd,
 	.error_handler		= pdc_error_handler,
@@ -213,8 +215,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
 				  PDC_FLAG_SATA_PATA,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_old_sata_ops,
 	},
@@ -222,8 +224,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	[board_2037x_pata] =
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_pata_ops,
 	},
@@ -232,8 +234,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
 				  PDC_FLAG_4_PORTS,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_old_sata_ops,
 	},
@@ -242,8 +244,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
 				  PDC_FLAG_4_PORTS,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_pata_ops,
 	},
@@ -252,8 +254,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
 				  PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_sata_ops,
 	},
@@ -262,8 +264,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
 				  PDC_FLAG_GEN_II,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_pata_ops,
 	},
@@ -272,8 +274,8 @@ static const struct ata_port_info pdc_port_info[] = {
 	{
 		.flags		= PDC_COMMON_FLAGS | ATA_FLAG_SATA |
 				  PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_sata_ops,
 	},
diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c
index a000c86..c3936d3 100644
--- a/drivers/ata/sata_qstor.c
+++ b/drivers/ata/sata_qstor.c
@@ -147,6 +147,7 @@ static struct ata_port_operations qs_ata_ops = {
 	.softreset		= ATA_OP_NULL,
 	.error_handler		= qs_error_handler,
 	.post_internal_cmd	= ATA_OP_NULL,
+	.lost_interrupt		= ATA_OP_NULL,
 
 	.scr_read		= qs_scr_read,
 	.scr_write		= qs_scr_write,
@@ -160,7 +161,7 @@ static const struct ata_port_info qs_port_info[] = {
 	{
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | ATA_FLAG_PIO_POLLING,
-		.pio_mask	= 0x10, /* pio4 */
+		.pio_mask	= ATA_PIO4_ONLY,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &qs_ata_ops,
 	},
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index d009160..e67ce8e 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -200,8 +200,8 @@ static const struct ata_port_info sil_port_info[] = {
 	/* sil_3112 */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE,
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
@@ -209,24 +209,24 @@ static const struct ata_port_info sil_port_info[] = {
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_MOD15WRITE |
 				  SIL_FLAG_NO_SATA_IRQ,
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
 	/* sil_3512 */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
 	/* sil_3114 */
 	{
 		.flags		= SIL_DFL_PORT_FLAGS | SIL_FLAG_RERR_ON_DMA_ACT,
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil_ops,
 	},
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index 2590c22..0d8990d 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -429,25 +429,25 @@ static const struct ata_port_info sil24_port_info[] = {
 	{
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(4) |
 				  SIL24_FLAG_PCIX_IRQ_WOC,
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil24_ops,
 	},
 	/* sil_3132 */
 	{
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(2),
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil24_ops,
 	},
 	/* sil_3131/sil_3531 */
 	{
 		.flags		= SIL24_COMMON_FLAGS | SIL24_NPORTS2FLAG(1),
-		.pio_mask	= 0x1f,			/* pio0-4 */
-		.mwdma_mask	= 0x07,			/* mwdma0-2 */
-		.udma_mask	= ATA_UDMA5,		/* udma0-5 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA5,
 		.port_ops	= &sil24_ops,
 	},
 };
diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c
index 9c43b4e..8f98332 100644
--- a/drivers/ata/sata_sis.c
+++ b/drivers/ata/sata_sis.c
@@ -97,8 +97,8 @@ static struct ata_port_operations sis_ops = {
 
 static const struct ata_port_info sis_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-	.pio_mask	= 0x1f,
-	.mwdma_mask	= 0x7,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &sis_ops,
 };
diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c
index 609d147..7257f2d 100644
--- a/drivers/ata/sata_svw.c
+++ b/drivers/ata/sata_svw.c
@@ -361,8 +361,8 @@ static const struct ata_port_info k2_port_info[] = {
 	{
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA,
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &k2_sata_ops,
 	},
@@ -371,8 +371,8 @@ static const struct ata_port_info k2_port_info[] = {
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | K2_FLAG_NO_ATAPI_DMA |
 				  K2_FLAG_SATA_8_PORTS,
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &k2_sata_ops,
 	},
@@ -380,8 +380,8 @@ static const struct ata_port_info k2_port_info[] = {
 	{
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO | K2_FLAG_BAR_POS_3,
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &k2_sata_ops,
 	},
@@ -389,8 +389,8 @@ static const struct ata_port_info k2_port_info[] = {
 	{
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &k2_sata_ops,
 	},
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index ec04b8d..dce3dcc 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -265,8 +265,8 @@ static const struct ata_port_info pdc_port_info[] = {
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_SRST | ATA_FLAG_MMIO |
 				  ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING,
-		.pio_mask	= 0x1f, /* pio0-4 */
-		.mwdma_mask	= 0x07, /* mwdma0-2 */
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &pdc_20621_ops,
 	},
diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c
index 019575b..e5bff47 100644
--- a/drivers/ata/sata_uli.c
+++ b/drivers/ata/sata_uli.c
@@ -89,7 +89,7 @@ static struct ata_port_operations uli_ops = {
 static const struct ata_port_info uli_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 			  ATA_FLAG_IGN_SIMPLEX,
-	.pio_mask       = 0x1f,		/* pio0-4 */
+	.pio_mask       = ATA_PIO4,
 	.udma_mask      = ATA_UDMA6,
 	.port_ops       = &uli_ops,
 };
diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c
index 5c62da9..98e8c50 100644
--- a/drivers/ata/sata_via.c
+++ b/drivers/ata/sata_via.c
@@ -146,24 +146,24 @@ static struct ata_port_operations vt8251_ops = {
 
 static const struct ata_port_info vt6420_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-	.pio_mask	= 0x1f,
-	.mwdma_mask	= 0x07,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt6420_sata_ops,
 };
 
 static struct ata_port_info vt6421_sport_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY,
-	.pio_mask	= 0x1f,
-	.mwdma_mask	= 0x07,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt6421_sata_ops,
 };
 
 static struct ata_port_info vt6421_pport_info = {
 	.flags		= ATA_FLAG_SLAVE_POSS | ATA_FLAG_NO_LEGACY,
-	.pio_mask	= 0x1f,
-	.mwdma_mask	= 0,
+	.pio_mask	= ATA_PIO4,
+	/* No MWDMA */
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt6421_pata_ops,
 };
@@ -171,8 +171,8 @@ static struct ata_port_info vt6421_pport_info = {
 static struct ata_port_info vt8251_port_info = {
 	.flags		= ATA_FLAG_SATA | ATA_FLAG_SLAVE_POSS |
 			  ATA_FLAG_NO_LEGACY,
-	.pio_mask	= 0x1f,
-	.mwdma_mask	= 0x07,
+	.pio_mask	= ATA_PIO4,
+	.mwdma_mask	= ATA_MWDMA2,
 	.udma_mask	= ATA_UDMA6,
 	.port_ops	= &vt8251_ops,
 };
diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c
index c57cdff..ed70bd2 100644
--- a/drivers/ata/sata_vsc.c
+++ b/drivers/ata/sata_vsc.c
@@ -308,6 +308,9 @@ static struct scsi_host_template vsc_sata_sht = {
 
 static struct ata_port_operations vsc_sata_ops = {
 	.inherits		= &ata_bmdma_port_ops,
+	/* The IRQ handling is not quite standard SFF behaviour so we
+	   cannot use the default lost interrupt handler */
+	.lost_interrupt		= ATA_OP_NULL,
 	.sff_tf_load		= vsc_sata_tf_load,
 	.sff_tf_read		= vsc_sata_tf_read,
 	.freeze			= vsc_freeze,
@@ -345,8 +348,8 @@ static int __devinit vsc_sata_init_one(struct pci_dev *pdev,
 	static const struct ata_port_info pi = {
 		.flags		= ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY |
 				  ATA_FLAG_MMIO,
-		.pio_mask	= 0x1f,
-		.mwdma_mask	= 0x07,
+		.pio_mask	= ATA_PIO4,
+		.mwdma_mask	= ATA_MWDMA2,
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &vsc_sata_ops,
 	};
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 9a061ac..3901b00 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -108,6 +108,8 @@ enum {
 	ATA_PIO5		= ATA_PIO4 | (1 << 5),
 	ATA_PIO6		= ATA_PIO5 | (1 << 6),
 
+	ATA_PIO4_ONLY		= (1 << 4),
+
 	ATA_SWDMA0		= (1 << 0),
 	ATA_SWDMA1		= ATA_SWDMA0 | (1 << 1),
 	ATA_SWDMA2		= ATA_SWDMA1 | (1 << 2),
@@ -117,6 +119,8 @@ enum {
 	ATA_MWDMA0		= (1 << 0),
 	ATA_MWDMA1		= ATA_MWDMA0 | (1 << 1),
 	ATA_MWDMA2		= ATA_MWDMA1 | (1 << 2),
+	ATA_MWDMA3		= ATA_MWDMA2 | (1 << 3),
+	ATA_MWDMA4		= ATA_MWDMA3 | (1 << 4),
 
 	ATA_MWDMA12_ONLY	= (1 << 1) | (1 << 2),
 	ATA_MWDMA2_ONLY		= (1 << 2),
@@ -131,6 +135,8 @@ enum {
 	ATA_UDMA7		= ATA_UDMA6 | (1 << 7),
 	/* ATA_UDMA7 is just for completeness... doesn't exist (yet?).  */
 
+	ATA_UDMA24_ONLY		= (1 << 2) | (1 << 4),
+
 	ATA_UDMA_MASK_40C	= ATA_UDMA2,	/* udma0-2 */
 
 	/* DMA-related */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index dc18b87..76262d8 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -795,6 +795,7 @@ struct ata_port_operations {
 	ata_reset_fn_t		pmp_hardreset;
 	ata_postreset_fn_t	pmp_postreset;
 	void (*error_handler)(struct ata_port *ap);
+	void (*lost_interrupt)(struct ata_port *ap);
 	void (*post_internal_cmd)(struct ata_queued_cmd *qc);
 
 	/*
@@ -836,6 +837,8 @@ struct ata_port_operations {
 	void (*bmdma_start)(struct ata_queued_cmd *qc);
 	void (*bmdma_stop)(struct ata_queued_cmd *qc);
 	u8   (*bmdma_status)(struct ata_port *ap);
+
+	void (*drain_fifo)(struct ata_queued_cmd *qc);
 #endif /* CONFIG_ATA_SFF */
 
 	ssize_t (*em_show)(struct ata_port *ap, char *buf);
@@ -1008,6 +1011,9 @@ extern int ata_cable_sata(struct ata_port *ap);
 extern int ata_cable_ignore(struct ata_port *ap);
 extern int ata_cable_unknown(struct ata_port *ap);
 
+extern void ata_pio_queue_task(struct ata_port *ap, void *data,
+			       unsigned long delay);
+
 /* Timing helpers */
 extern unsigned int ata_pio_need_iordy(const struct ata_device *);
 extern const struct ata_timing *ata_timing_find_mode(u8 xfer_mode);
@@ -1572,6 +1578,7 @@ extern bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc);
 extern unsigned int ata_sff_host_intr(struct ata_port *ap,
 				      struct ata_queued_cmd *qc);
 extern irqreturn_t ata_sff_interrupt(int irq, void *dev_instance);
+extern void ata_sff_lost_interrupt(struct ata_port *ap);
 extern void ata_sff_freeze(struct ata_port *ap);
 extern void ata_sff_thaw(struct ata_port *ap);
 extern int ata_sff_prereset(struct ata_link *link, unsigned long deadline);
@@ -1584,6 +1591,7 @@ extern int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 extern int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 			       unsigned long deadline);
 extern void ata_sff_postreset(struct ata_link *link, unsigned int *classes);
+extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc);
 extern void ata_sff_error_handler(struct ata_port *ap);
 extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc);
 extern int ata_sff_port_start(struct ata_port *ap);

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-02-03  4:27 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-02-03  4:27 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


1) 8-patch patchset from Tejun to fix eSata cable flakiness and
   WD My Book issues

2) A CompactFlash (CFA) identification fix, which also affects
   drivers/ide, since drivers/ide shares some definitions with libata
   via include/linux/ata.h.

Other minor fixes, and an AHCI workaround for staggered spin-up ("SSS")
from Arjan related to the async stuff.

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ahci.c        |    9 ++++-
 drivers/ata/libata-core.c |   96 +++++++++++++++++++++++++++++++++-----------
 drivers/ata/libata-eh.c   |   87 +++++++++++++++++++++++++++++++++++++----
 drivers/ata/libata-pmp.c  |    2 +-
 drivers/ata/libata-scsi.c |    1 +
 drivers/ata/libata.h      |    4 +-
 drivers/ata/sata_mv.c     |    4 +-
 drivers/ata/sata_nv.c     |    7 +++-
 drivers/ata/sata_sil.c    |    2 +-
 include/linux/ata.h       |   15 +++++--
 include/linux/libata.h    |   19 +++++----
 11 files changed, 193 insertions(+), 53 deletions(-)

Arjan van de Ven (1):
      ahci: add a module parameter to ignore the SSS flags for async scanning

Mark Lord (1):
      sata_mv: Fix chip type for Hightpoint RocketRaid 1740/1742

Pasi Kärkkäinen (1):
      [libata] sata_sil: Fix compilation error with libata debugging enabled

Randy Dunlap (1):
      libata: fix kernel-doc warnings

Sergei Shtylyov (1):
      ide/libata: fix ata_id_is_cfa() (take 4)

Tejun Heo (9):
      sata_nv: ck804 has borked hardreset too
      libata: fix EH device failure handling
      libata: move ata_dev_disable() to libata-eh.c
      libata: check onlineness before using SPD in sata_down_spd_limit()
      libata: clear dev->ering in smarter way
      libata: add @spd_limit to sata_down_spd_limit()
      libata: improve probe failure handling
      libata: add no penalty retry request for EH device handling routines
      libata: implement HORKAGE_1_5_GBPS and apply it to WD My Book

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 77bba4c..a603bbf 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -61,9 +61,14 @@
 #define EM_MSG_LED_VALUE_ON           0x00010000
 
 static int ahci_skip_host_reset;
+static int ahci_ignore_sss;
+
 module_param_named(skip_host_reset, ahci_skip_host_reset, int, 0444);
 MODULE_PARM_DESC(skip_host_reset, "skip global host reset (0=don't skip, 1=skip)");
 
+module_param_named(ignore_sss, ahci_ignore_sss, int, 0444);
+MODULE_PARM_DESC(ignore_sss, "Ignore staggered spinup flag (0=don't ignore, 1=ignore)");
+
 static int ahci_enable_alpm(struct ata_port *ap,
 		enum link_pm policy);
 static void ahci_disable_alpm(struct ata_port *ap);
@@ -2692,8 +2697,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	host->iomap = pcim_iomap_table(pdev);
 	host->private_data = hpriv;
 
-	if (!(hpriv->cap & HOST_CAP_SSS))
+	if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
 		host->flags |= ATA_HOST_PARALLEL_SCAN;
+	else
+		printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
 
 	if (pi.flags & ATA_FLAG_EM)
 		ahci_reset_em(host);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 88c2428..9fbf059 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -164,6 +164,11 @@ MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_VERSION);
 
 
+static bool ata_sstatus_online(u32 sstatus)
+{
+	return (sstatus & 0xf) == 0x3;
+}
+
 /**
  *	ata_link_next - link iteration helper
  *	@link: the previous link, NULL to start
@@ -1015,18 +1020,6 @@ static const char *sata_spd_string(unsigned int spd)
 	return spd_str[spd - 1];
 }
 
-void ata_dev_disable(struct ata_device *dev)
-{
-	if (ata_dev_enabled(dev)) {
-		if (ata_msg_drv(dev->link->ap))
-			ata_dev_printk(dev, KERN_WARNING, "disabled\n");
-		ata_acpi_on_disable(dev);
-		ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 |
-					     ATA_DNXFER_QUIET);
-		dev->class++;
-	}
-}
-
 static int ata_dev_set_dipm(struct ata_device *dev, enum link_pm policy)
 {
 	struct ata_link *link = dev->link;
@@ -2239,6 +2232,40 @@ retry:
 	return rc;
 }
 
+static int ata_do_link_spd_horkage(struct ata_device *dev)
+{
+	struct ata_link *plink = ata_dev_phys_link(dev);
+	u32 target, target_limit;
+
+	if (!sata_scr_valid(plink))
+		return 0;
+
+	if (dev->horkage & ATA_HORKAGE_1_5_GBPS)
+		target = 1;
+	else
+		return 0;
+
+	target_limit = (1 << target) - 1;
+
+	/* if already on stricter limit, no need to push further */
+	if (plink->sata_spd_limit <= target_limit)
+		return 0;
+
+	plink->sata_spd_limit = target_limit;
+
+	/* Request another EH round by returning -EAGAIN if link is
+	 * going faster than the target speed.  Forward progress is
+	 * guaranteed by setting sata_spd_limit to target_limit above.
+	 */
+	if (plink->sata_spd > target) {
+		ata_dev_printk(dev, KERN_INFO,
+			       "applying link speed limit horkage to %s\n",
+			       sata_spd_string(target));
+		return -EAGAIN;
+	}
+	return 0;
+}
+
 static inline u8 ata_dev_knobble(struct ata_device *dev)
 {
 	struct ata_port *ap = dev->link->ap;
@@ -2329,6 +2356,10 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	rc = ata_do_link_spd_horkage(dev);
+	if (rc)
+		return rc;
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -2784,7 +2815,7 @@ int ata_bus_probe(struct ata_port *ap)
 			/* This is the last chance, better to slow
 			 * down than lose it.
 			 */
-			sata_down_spd_limit(&ap->link);
+			sata_down_spd_limit(&ap->link, 0);
 			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
 		}
 	}
@@ -2880,21 +2911,27 @@ void ata_port_disable(struct ata_port *ap)
 /**
  *	sata_down_spd_limit - adjust SATA spd limit downward
  *	@link: Link to adjust SATA spd limit for
+ *	@spd_limit: Additional limit
  *
  *	Adjust SATA spd limit of @link downward.  Note that this
  *	function only adjusts the limit.  The change must be applied
  *	using sata_set_spd().
  *
+ *	If @spd_limit is non-zero, the speed is limited to equal to or
+ *	lower than @spd_limit if such speed is supported.  If
+ *	@spd_limit is slower than any supported speed, only the lowest
+ *	supported speed is allowed.
+ *
  *	LOCKING:
  *	Inherited from caller.
  *
  *	RETURNS:
  *	0 on success, negative errno on failure
  */
-int sata_down_spd_limit(struct ata_link *link)
+int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
 {
 	u32 sstatus, spd, mask;
-	int rc, highbit;
+	int rc, bit;
 
 	if (!sata_scr_valid(link))
 		return -EOPNOTSUPP;
@@ -2903,7 +2940,7 @@ int sata_down_spd_limit(struct ata_link *link)
 	 * If not, use cached value in link->sata_spd.
 	 */
 	rc = sata_scr_read(link, SCR_STATUS, &sstatus);
-	if (rc == 0)
+	if (rc == 0 && ata_sstatus_online(sstatus))
 		spd = (sstatus >> 4) & 0xf;
 	else
 		spd = link->sata_spd;
@@ -2913,8 +2950,8 @@ int sata_down_spd_limit(struct ata_link *link)
 		return -EINVAL;
 
 	/* unconditionally mask off the highest bit */
-	highbit = fls(mask) - 1;
-	mask &= ~(1 << highbit);
+	bit = fls(mask) - 1;
+	mask &= ~(1 << bit);
 
 	/* Mask off all speeds higher than or equal to the current
 	 * one.  Force 1.5Gbps if current SPD is not available.
@@ -2928,6 +2965,15 @@ int sata_down_spd_limit(struct ata_link *link)
 	if (!mask)
 		return -EINVAL;
 
+	if (spd_limit) {
+		if (mask & ((1 << spd_limit) - 1))
+			mask &= (1 << spd_limit) - 1;
+		else {
+			bit = ffs(mask) - 1;
+			mask = 1 << bit;
+		}
+	}
+
 	link->sata_spd_limit = mask;
 
 	ata_link_printk(link, KERN_WARNING, "limiting SATA link speed to %s\n",
@@ -4215,6 +4261,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Devices that do not need bridging limits applied */
 	{ "MTRON MSP-SATA*",		NULL,	ATA_HORKAGE_BRIDGE_OK, },
 
+	/* Devices which aren't very happy with higher link speeds */
+	{ "WD My Book",			NULL,	ATA_HORKAGE_1_5_GBPS, },
+
 	/* End Marker */
 	{ }
 };
@@ -4709,8 +4758,7 @@ void swap_buf_le16(u16 *buf, unsigned int buf_words)
 
 /**
  *	ata_qc_new - Request an available ATA command, for queueing
- *	@ap: Port associated with device @dev
- *	@dev: Device from whom we request an available command structure
+ *	@ap: target port
  *
  *	LOCKING:
  *	None.
@@ -5175,7 +5223,7 @@ bool ata_phys_link_online(struct ata_link *link)
 	u32 sstatus;
 
 	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
-	    (sstatus & 0xf) == 0x3)
+	    ata_sstatus_online(sstatus))
 		return true;
 	return false;
 }
@@ -5199,7 +5247,7 @@ bool ata_phys_link_offline(struct ata_link *link)
 	u32 sstatus;
 
 	if (sata_scr_read(link, SCR_STATUS, &sstatus) == 0 &&
-	    (sstatus & 0xf) != 0x3)
+	    !ata_sstatus_online(sstatus))
 		return true;
 	return false;
 }
@@ -5412,8 +5460,8 @@ void ata_dev_init(struct ata_device *dev)
 	dev->horkage = 0;
 	spin_unlock_irqrestore(ap->lock, flags);
 
-	memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0,
-	       sizeof(*dev) - ATA_DEVICE_CLEAR_OFFSET);
+	memset((void *)dev + ATA_DEVICE_CLEAR_BEGIN, 0,
+	       ATA_DEVICE_CLEAR_END - ATA_DEVICE_CLEAR_BEGIN);
 	dev->pio_mask = UINT_MAX;
 	dev->mwdma_mask = UINT_MAX;
 	dev->udma_mask = UINT_MAX;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 8147a83..ce2ef04 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -82,6 +82,10 @@ enum {
 	ATA_EH_FASTDRAIN_INTERVAL	=  3000,
 
 	ATA_EH_UA_TRIES			= 5,
+
+	/* probe speed down parameters, see ata_eh_schedule_probe() */
+	ATA_EH_PROBE_TRIAL_INTERVAL	= 60000,	/* 1 min */
+	ATA_EH_PROBE_TRIALS		= 2,
 };
 
 /* The following table determines how we sequence resets.  Each entry
@@ -1176,6 +1180,32 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc)
 }
 
 /**
+ *	ata_dev_disable - disable ATA device
+ *	@dev: ATA device to disable
+ *
+ *	Disable @dev.
+ *
+ *	Locking:
+ *	EH context.
+ */
+void ata_dev_disable(struct ata_device *dev)
+{
+	if (!ata_dev_enabled(dev))
+		return;
+
+	if (ata_msg_drv(dev->link->ap))
+		ata_dev_printk(dev, KERN_WARNING, "disabled\n");
+	ata_acpi_on_disable(dev);
+	ata_down_xfermask_limit(dev, ATA_DNXFER_FORCE_PIO0 | ATA_DNXFER_QUIET);
+	dev->class++;
+
+	/* From now till the next successful probe, ering is used to
+	 * track probe failures.  Clear accumulated device error info.
+	 */
+	ata_ering_clear(&dev->ering);
+}
+
+/**
  *	ata_eh_detach_dev - detach ATA device
  *	@dev: ATA device to detach
  *
@@ -1849,7 +1879,7 @@ static unsigned int ata_eh_speed_down(struct ata_device *dev,
 	/* speed down? */
 	if (verdict & ATA_EH_SPDN_SPEED_DOWN) {
 		/* speed down SATA link speed if possible */
-		if (sata_down_spd_limit(link) == 0) {
+		if (sata_down_spd_limit(link, 0) == 0) {
 			action |= ATA_EH_RESET;
 			goto done;
 		}
@@ -2601,11 +2631,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	}
 
 	if (try == max_tries - 1) {
-		sata_down_spd_limit(link);
+		sata_down_spd_limit(link, 0);
 		if (slave)
-			sata_down_spd_limit(slave);
+			sata_down_spd_limit(slave, 0);
 	} else if (rc == -EPIPE)
-		sata_down_spd_limit(failed_link);
+		sata_down_spd_limit(failed_link, 0);
 
 	if (hardreset)
 		reset = hardreset;
@@ -2744,6 +2774,8 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
 						     readid_flags, dev->id);
 			switch (rc) {
 			case 0:
+				/* clear error info accumulated during probe */
+				ata_ering_clear(&dev->ering);
 				new_mask |= 1 << dev->devno;
 				break;
 			case -ENOENT:
@@ -2947,9 +2979,24 @@ static int ata_eh_skip_recovery(struct ata_link *link)
 	return 1;
 }
 
+static int ata_count_probe_trials_cb(struct ata_ering_entry *ent, void *void_arg)
+{
+	u64 interval = msecs_to_jiffies(ATA_EH_PROBE_TRIAL_INTERVAL);
+	u64 now = get_jiffies_64();
+	int *trials = void_arg;
+
+	if (ent->timestamp < now - min(now, interval))
+		return -1;
+
+	(*trials)++;
+	return 0;
+}
+
 static int ata_eh_schedule_probe(struct ata_device *dev)
 {
 	struct ata_eh_context *ehc = &dev->link->eh_context;
+	struct ata_link *link = ata_dev_phys_link(dev);
+	int trials = 0;
 
 	if (!(ehc->i.probe_mask & (1 << dev->devno)) ||
 	    (ehc->did_probe_mask & (1 << dev->devno)))
@@ -2962,6 +3009,25 @@ static int ata_eh_schedule_probe(struct ata_device *dev)
 	ehc->saved_xfer_mode[dev->devno] = 0;
 	ehc->saved_ncq_enabled &= ~(1 << dev->devno);
 
+	/* Record and count probe trials on the ering.  The specific
+	 * error mask used is irrelevant.  Because a successful device
+	 * detection clears the ering, this count accumulates only if
+	 * there are consecutive failed probes.
+	 *
+	 * If the count is equal to or higher than ATA_EH_PROBE_TRIALS
+	 * in the last ATA_EH_PROBE_TRIAL_INTERVAL, link speed is
+	 * forced to 1.5Gbps.
+	 *
+	 * This is to work around cases where failed link speed
+	 * negotiation results in device misdetection leading to
+	 * infinite DEVXCHG or PHRDY CHG events.
+	 */
+	ata_ering_record(&dev->ering, 0, AC_ERR_OTHER);
+	ata_ering_map(&dev->ering, ata_count_probe_trials_cb, &trials);
+
+	if (trials > ATA_EH_PROBE_TRIALS)
+		sata_down_spd_limit(link, 1);
+
 	return 1;
 }
 
@@ -2969,7 +3035,11 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 {
 	struct ata_eh_context *ehc = &dev->link->eh_context;
 
-	ehc->tries[dev->devno]--;
+	/* -EAGAIN from EH routine indicates retry without prejudice.
+	 * The requester is responsible for ensuring forward progress.
+	 */
+	if (err != -EAGAIN)
+		ehc->tries[dev->devno]--;
 
 	switch (err) {
 	case -ENODEV:
@@ -2979,12 +3049,13 @@ static int ata_eh_handle_dev_fail(struct ata_device *dev, int err)
 		/* give it just one more chance */
 		ehc->tries[dev->devno] = min(ehc->tries[dev->devno], 1);
 	case -EIO:
-		if (ehc->tries[dev->devno] == 1 && dev->pio_mode > XFER_PIO_0) {
+		if (ehc->tries[dev->devno] == 1) {
 			/* This is the last chance, better to slow
 			 * down than lose it.
 			 */
-			sata_down_spd_limit(ata_dev_phys_link(dev));
-			ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
+			sata_down_spd_limit(ata_dev_phys_link(dev), 0);
+			if (dev->pio_mode > XFER_PIO_0)
+				ata_down_xfermask_limit(dev, ATA_DNXFER_PIO);
 		}
 	}
 
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index 98ca07a..619f2c3 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -729,7 +729,7 @@ static int sata_pmp_eh_recover_pmp(struct ata_port *ap,
 		if (tries) {
 			/* consecutive revalidation failures? speed down */
 			if (reval_failed)
-				sata_down_spd_limit(link);
+				sata_down_spd_limit(link, 0);
 			else
 				reval_failed = 1;
 
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 3c4c5ae..b9747fa 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -415,6 +415,7 @@ int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
 
 /**
  *	ata_get_identity - Handler for HDIO_GET_IDENTITY ioctl
+ *	@ap: target port
  *	@sdev: SCSI device to get identify data for
  *	@arg: User buffer area for identify data
  *
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index fe2839e..cea8014 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -79,7 +79,6 @@ extern int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
 			   u64 block, u32 n_block, unsigned int tf_flags,
 			   unsigned int tag);
 extern u64 ata_tf_read_block(struct ata_taskfile *tf, struct ata_device *dev);
-extern void ata_dev_disable(struct ata_device *dev);
 extern void ata_pio_queue_task(struct ata_port *ap, void *data,
 			       unsigned long delay);
 extern void ata_port_flush_task(struct ata_port *ap);
@@ -100,7 +99,7 @@ extern int ata_dev_reread_id(struct ata_device *dev, unsigned int readid_flags);
 extern int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 			      unsigned int readid_flags);
 extern int ata_dev_configure(struct ata_device *dev);
-extern int sata_down_spd_limit(struct ata_link *link);
+extern int sata_down_spd_limit(struct ata_link *link, u32 spd_limit);
 extern int ata_down_xfermask_limit(struct ata_device *dev, unsigned int sel);
 extern void ata_sg_clean(struct ata_queued_cmd *qc);
 extern void ata_qc_free(struct ata_queued_cmd *qc);
@@ -160,6 +159,7 @@ extern void ata_scsi_error(struct Scsi_Host *host);
 extern void ata_port_wait_eh(struct ata_port *ap);
 extern void ata_eh_fastdrain_timerfn(unsigned long arg);
 extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
+extern void ata_dev_disable(struct ata_device *dev);
 extern void ata_eh_detach_dev(struct ata_device *dev);
 extern void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev,
 			       unsigned int action);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index f2d8a02..4ae1a41 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -663,8 +663,8 @@ static const struct pci_device_id mv_pci_tbl[] = {
 	{ PCI_VDEVICE(MARVELL, 0x5081), chip_508x },
 	/* RocketRAID 1720/174x have different identifiers */
 	{ PCI_VDEVICE(TTI, 0x1720), chip_6042 },
-	{ PCI_VDEVICE(TTI, 0x1740), chip_508x },
-	{ PCI_VDEVICE(TTI, 0x1742), chip_508x },
+	{ PCI_VDEVICE(TTI, 0x1740), chip_6042 },
+	{ PCI_VDEVICE(TTI, 0x1742), chip_6042 },
 
 	{ PCI_VDEVICE(MARVELL, 0x6040), chip_604x },
 	{ PCI_VDEVICE(MARVELL, 0x6041), chip_604x },
diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c
index c49ad0e..444af04 100644
--- a/drivers/ata/sata_nv.c
+++ b/drivers/ata/sata_nv.c
@@ -436,11 +436,16 @@ static struct ata_port_operations nv_nf2_ops = {
 	.hardreset		= nv_noclassify_hardreset,
 };
 
-/* CK804 finally gets hardreset right */
+/* For initial probing after boot and hot plugging, hardreset mostly
+ * works fine on CK804 but curiously, reprobing on the initial port by
+ * rescanning or rmmod/insmod fails to acquire the initial D2H Reg FIS
+ * in somewhat undeterministic way.  Use noclassify hardreset.
+ */
 static struct ata_port_operations nv_ck804_ops = {
 	.inherits		= &nv_common_ops,
 	.freeze			= nv_ck804_freeze,
 	.thaw			= nv_ck804_thaw,
+	.hardreset		= nv_noclassify_hardreset,
 	.host_stop		= nv_ck804_host_stop,
 };
 
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 9f02959..d009160 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -324,7 +324,7 @@ static void sil_fill_sg(struct ata_queued_cmd *qc)
 
 		prd->addr = cpu_to_le32(addr);
 		prd->flags_len = cpu_to_le32(sg_len);
-		VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", pi, addr, sg_len);
+		VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", si, addr, sg_len);
 
 		last_prd = prd;
 		prd++;
diff --git a/include/linux/ata.h b/include/linux/ata.h
index a53318b..08a86d5 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -731,12 +731,17 @@ static inline int ata_id_current_chs_valid(const u16 *id)
 
 static inline int ata_id_is_cfa(const u16 *id)
 {
-	if (id[ATA_ID_CONFIG] == 0x848A)	/* Standard CF */
+	if (id[ATA_ID_CONFIG] == 0x848A)	/* Traditional CF */
 		return 1;
-	/* Could be CF hiding as standard ATA */
-	if (ata_id_major_version(id) >= 3 &&
-	    id[ATA_ID_COMMAND_SET_1] != 0xFFFF &&
-	   (id[ATA_ID_COMMAND_SET_1] & (1 << 2)))
+	/*
+	 * CF specs don't require specific value in the word 0 anymore and yet
+	 * they forbid to report the ATA version in the word 80 and require the
+	 * CFA feature set support to be indicated in the word 83 in this case.
+	 * Unfortunately, some cards only follow either of this requirements,
+	 * and while those that don't indicate CFA feature support need some
+	 * sort of quirk list, it seems impractical for the ones that do...
+	 */
+	if ((id[ATA_ID_COMMAND_SET_2] & 0xC004) == 0x4004)
 		return 1;
 	return 0;
 }
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bca3ba2..5d87bc0 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -380,6 +380,7 @@ enum {
 	ATA_HORKAGE_ATAPI_MOD16_DMA = (1 << 11), /* use ATAPI DMA for commands
 						    not multiple of 16 bytes */
 	ATA_HORKAGE_FIRMWARE_WARN = (1 << 12),	/* firwmare update warning */
+	ATA_HORKAGE_1_5_GBPS	= (1 << 13),	/* force 1.5 Gbps */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
@@ -580,7 +581,7 @@ struct ata_device {
 	acpi_handle		acpi_handle;
 	union acpi_object	*gtf_cache;
 #endif
-	/* n_sector is used as CLEAR_OFFSET, read comment above CLEAR_OFFSET */
+	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
 	u64			n_sectors;	/* size of device, if ATA */
 	unsigned int		class;		/* ATA_DEV_xxx */
 	unsigned long		unpark_deadline;
@@ -605,20 +606,22 @@ struct ata_device {
 	u16			heads;		/* Number of heads */
 	u16			sectors;	/* Number of sectors per track */
 
-	/* error history */
-	int			spdn_cnt;
-	struct ata_ering	ering;
-
 	union {
 		u16		id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
 		u32		gscr[SATA_PMP_GSCR_DWORDS]; /* PMP GSCR block */
 	};
+
+	/* error history */
+	int			spdn_cnt;
+	/* ering is CLEAR_END, read comment above CLEAR_END */
+	struct ata_ering	ering;
 };
 
-/* Offset into struct ata_device.  Fields above it are maintained
- * acress device init.  Fields below are zeroed.
+/* Fields between ATA_DEVICE_CLEAR_BEGIN and ATA_DEVICE_CLEAR_END are
+ * cleared to zero on ata_dev_init().
  */
-#define ATA_DEVICE_CLEAR_OFFSET		offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_BEGIN		offsetof(struct ata_device, n_sectors)
+#define ATA_DEVICE_CLEAR_END		offsetof(struct ata_device, ering)
 
 struct ata_eh_info {
 	struct ata_device	*dev;		/* offending device */

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2009-01-08 21:46 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2009-01-08 21:46 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Lots of little bits.  The only notable piece is Alan's 32-bit PIO
support; but even that is small and nicely contained, thanks to the
nifty inheritance system from Tejun.

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ahci.c          |   10 ++-
 drivers/ata/ata_piix.c      |   51 ++++++++----
 drivers/ata/libata-core.c   |    5 +
 drivers/ata/libata-sff.c    |  185 ++++++++++++++++++++++++++++---------------
 drivers/ata/pata_ali.c      |  107 ++++++++++++++++---------
 drivers/ata/pata_amd.c      |    4 +-
 drivers/ata/pata_hpt366.c   |  109 ++++++++++---------------
 drivers/ata/pata_hpt3x3.c   |   49 ++++++++++-
 drivers/ata/pata_mpiix.c    |    3 +-
 drivers/ata/pata_platform.c |    2 +-
 drivers/ata/pata_sil680.c   |    4 +-
 drivers/ata/sata_sil24.c    |    7 --
 include/linux/libata.h      |    3 +
 13 files changed, 336 insertions(+), 203 deletions(-)

Alan Cox (5):
      pata_hpt3x3: Workarounds for chipset
      pata_ali: force initialise a few bits
      pata_ali: Fix and workaround for FIFO DMA bug
      libata: Add 32bit PIO support
      libata: clean up the SFF code for coding style

David Daney (1):
      libata: Add special ata_pio_need_iordy() handling for Compact Flash.

Grant Grundler (1):
      sata_sil24: remove unused sil24_port_multiplier

Jeff Garzik (1):
      [libata] pata_hpt3x3: correct _freeze() function declaration

Shane Huang (2):
      [libata] ahci: Add SATA GEN3 related messages
      [libata] ahci: Withdraw IGN_SERR_INTERNAL for SB800 SATA

Sonic Zhang (1):
      pata_platform: __pata_platform_remove() shouldn't be in discard section

Tejun Heo (2):
      ata_piix: save, use saved and restore IOCFG
      pata_hpt366: reimplement mode programming

diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 656448c..7f701cb 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -105,7 +105,7 @@ enum {
 	board_ahci_ign_iferr	= 2,
 	board_ahci_sb600	= 3,
 	board_ahci_mv		= 4,
-	board_ahci_sb700	= 5,
+	board_ahci_sb700	= 5, /* for SB700 and SB800 */
 	board_ahci_mcp65	= 6,
 	board_ahci_nopmp	= 7,
 
@@ -439,7 +439,7 @@ static const struct ata_port_info ahci_port_info[] = {
 		.udma_mask	= ATA_UDMA6,
 		.port_ops	= &ahci_ops,
 	},
-	/* board_ahci_sb700 */
+	/* board_ahci_sb700, for SB700 and SB800 */
 	{
 		AHCI_HFLAGS	(AHCI_HFLAG_IGN_SERR_INTERNAL),
 		.flags		= AHCI_FLAG_COMMON,
@@ -2446,6 +2446,8 @@ static void ahci_print_info(struct ata_host *host)
 		speed_s = "1.5";
 	else if (speed == 2)
 		speed_s = "3";
+	else if (speed == 3)
+		speed_s = "6";
 	else
 		speed_s = "?";
 
@@ -2610,6 +2612,10 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	    (pdev->revision == 0xa1 || pdev->revision == 0xa2))
 		hpriv->flags |= AHCI_HFLAG_NO_MSI;
 
+	/* SB800 does NOT need the workaround to ignore SERR_INTERNAL */
+	if (board_id == board_ahci_sb700 && pdev->revision >= 0x40)
+		hpriv->flags &= ~AHCI_HFLAG_IGN_SERR_INTERNAL;
+
 	if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev))
 		pci_intx(pdev, 1);
 
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 5fdf167..887d8f4 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -154,11 +154,13 @@ struct piix_map_db {
 
 struct piix_host_priv {
 	const int *map;
+	u32 saved_iocfg;
 	void __iomem *sidpr;
 };
 
 static int piix_init_one(struct pci_dev *pdev,
 			 const struct pci_device_id *ent);
+static void piix_remove_one(struct pci_dev *pdev);
 static int piix_pata_prereset(struct ata_link *link, unsigned long deadline);
 static void piix_set_piomode(struct ata_port *ap, struct ata_device *adev);
 static void piix_set_dmamode(struct ata_port *ap, struct ata_device *adev);
@@ -296,7 +298,7 @@ static struct pci_driver piix_pci_driver = {
 	.name			= DRV_NAME,
 	.id_table		= piix_pci_tbl,
 	.probe			= piix_init_one,
-	.remove			= ata_pci_remove_one,
+	.remove			= piix_remove_one,
 #ifdef CONFIG_PM
 	.suspend		= piix_pci_device_suspend,
 	.resume			= piix_pci_device_resume,
@@ -308,7 +310,7 @@ static struct scsi_host_template piix_sht = {
 };
 
 static struct ata_port_operations piix_pata_ops = {
-	.inherits		= &ata_bmdma_port_ops,
+	.inherits		= &ata_bmdma32_port_ops,
 	.cable_detect		= ata_cable_40wire,
 	.set_piomode		= piix_set_piomode,
 	.set_dmamode		= piix_set_dmamode,
@@ -610,8 +612,9 @@ static const struct ich_laptop ich_laptop[] = {
 static int ich_pata_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+	struct piix_host_priv *hpriv = ap->host->private_data;
 	const struct ich_laptop *lap = &ich_laptop[0];
-	u8 tmp, mask;
+	u8 mask;
 
 	/* Check for specials - Acer Aspire 5602WLMi */
 	while (lap->device) {
@@ -625,8 +628,7 @@ static int ich_pata_cable_detect(struct ata_port *ap)
 
 	/* check BIOS cable detect results */
 	mask = ap->port_no == 0 ? PIIX_80C_PRI : PIIX_80C_SEC;
-	pci_read_config_byte(pdev, PIIX_IOCFG, &tmp);
-	if ((tmp & mask) == 0)
+	if ((hpriv->saved_iocfg & mask) == 0)
 		return ATA_CBL_PATA40;
 	return ATA_CBL_PATA80;
 }
@@ -1350,7 +1352,7 @@ static int __devinit piix_init_sidpr(struct ata_host *host)
 	return 0;
 }
 
-static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
+static void piix_iocfg_bit18_quirk(struct ata_host *host)
 {
 	static const struct dmi_system_id sysids[] = {
 		{
@@ -1367,7 +1369,8 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
 
 		{ }	/* terminate list */
 	};
-	u32 iocfg;
+	struct pci_dev *pdev = to_pci_dev(host->dev);
+	struct piix_host_priv *hpriv = host->private_data;
 
 	if (!dmi_check_system(sysids))
 		return;
@@ -1376,12 +1379,11 @@ static void piix_iocfg_bit18_quirk(struct pci_dev *pdev)
 	 * seem to use it to disable a channel.  Clear the bit on the
 	 * affected systems.
 	 */
-	pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg);
-	if (iocfg & (1 << 18)) {
+	if (hpriv->saved_iocfg & (1 << 18)) {
 		dev_printk(KERN_INFO, &pdev->dev,
 			   "applying IOCFG bit18 quirk\n");
-		iocfg &= ~(1 << 18);
-		pci_write_config_dword(pdev, PIIX_IOCFG, iocfg);
+		pci_write_config_dword(pdev, PIIX_IOCFG,
+				       hpriv->saved_iocfg & ~(1 << 18));
 	}
 }
 
@@ -1430,6 +1432,17 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	if (rc)
 		return rc;
 
+	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
+	if (!hpriv)
+		return -ENOMEM;
+
+	/* Save IOCFG, this will be used for cable detection, quirk
+	 * detection and restoration on detach.  This is necessary
+	 * because some ACPI implementations mess up cable related
+	 * bits on _STM.  Reported on kernel bz#11879.
+	 */
+	pci_read_config_dword(pdev, PIIX_IOCFG, &hpriv->saved_iocfg);
+
 	/* ICH6R may be driven by either ata_piix or ahci driver
 	 * regardless of BIOS configuration.  Make sure AHCI mode is
 	 * off.
@@ -1441,10 +1454,6 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	}
 
 	/* SATA map init can change port_info, do it before prepping host */
-	hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
-	if (!hpriv)
-		return -ENOMEM;
-
 	if (port_flags & ATA_FLAG_SATA)
 		hpriv->map = piix_init_sata_map(pdev, port_info,
 					piix_map_db_table[ent->driver_data]);
@@ -1463,7 +1472,7 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	}
 
 	/* apply IOCFG bit18 quirk */
-	piix_iocfg_bit18_quirk(pdev);
+	piix_iocfg_bit18_quirk(host);
 
 	/* On ICH5, some BIOSen disable the interrupt using the
 	 * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3.
@@ -1488,6 +1497,16 @@ static int __devinit piix_init_one(struct pci_dev *pdev,
 	return ata_pci_sff_activate_host(host, ata_sff_interrupt, &piix_sht);
 }
 
+static void piix_remove_one(struct pci_dev *pdev)
+{
+	struct ata_host *host = dev_get_drvdata(&pdev->dev);
+	struct piix_host_priv *hpriv = host->private_data;
+
+	pci_write_config_dword(pdev, PIIX_IOCFG, hpriv->saved_iocfg);
+
+	ata_pci_remove_one(pdev);
+}
+
 static int __init piix_init(void)
 {
 	int rc;
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index f178a45..175df54 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1007,6 +1007,7 @@ static const char *sata_spd_string(unsigned int spd)
 	static const char * const spd_str[] = {
 		"1.5 Gbps",
 		"3.0 Gbps",
+		"6.0 Gbps",
 	};
 
 	if (spd == 0 || (spd - 1) >= ARRAY_SIZE(spd_str))
@@ -2000,6 +2001,10 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
 	   as the caller should know this */
 	if (adev->link->ap->flags & ATA_FLAG_NO_IORDY)
 		return 0;
+	/* CF spec. r4.1 Table 22 says no iordy on PIO5 and PIO6.  */
+	if (ata_id_is_cfa(adev->id)
+	    && (adev->pio_mode == XFER_PIO_5 || adev->pio_mode == XFER_PIO_6))
+		return 0;
 	/* PIO3 and higher it is mandatory */
 	if (adev->pio_mode > XFER_PIO_2)
 		return 1;
diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c
index 9033d16..c59ad76 100644
--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -66,6 +66,7 @@ const struct ata_port_operations ata_sff_port_ops = {
 
 	.port_start		= ata_sff_port_start,
 };
+EXPORT_SYMBOL_GPL(ata_sff_port_ops);
 
 const struct ata_port_operations ata_bmdma_port_ops = {
 	.inherits		= &ata_sff_port_ops,
@@ -77,6 +78,14 @@ const struct ata_port_operations ata_bmdma_port_ops = {
 	.bmdma_stop		= ata_bmdma_stop,
 	.bmdma_status		= ata_bmdma_status,
 };
+EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
+
+const struct ata_port_operations ata_bmdma32_port_ops = {
+	.inherits		= &ata_bmdma_port_ops,
+
+	.sff_data_xfer		= ata_sff_data_xfer32,
+};
+EXPORT_SYMBOL_GPL(ata_bmdma32_port_ops);
 
 /**
  *	ata_fill_sg - Fill PCI IDE PRD table
@@ -166,8 +175,9 @@ static void ata_fill_sg_dumb(struct ata_queued_cmd *qc)
 			blen = len & 0xffff;
 			ap->prd[pi].addr = cpu_to_le32(addr);
 			if (blen == 0) {
-			   /* Some PATA chipsets like the CS5530 can't
-			      cope with 0x0000 meaning 64K as the spec says */
+				/* Some PATA chipsets like the CS5530 can't
+				   cope with 0x0000 meaning 64K as the spec
+				   says */
 				ap->prd[pi].flags_len = cpu_to_le32(0x8000);
 				blen = 0x8000;
 				ap->prd[++pi].addr = cpu_to_le32(addr + 0x8000);
@@ -200,6 +210,7 @@ void ata_sff_qc_prep(struct ata_queued_cmd *qc)
 
 	ata_fill_sg(qc);
 }
+EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
 
 /**
  *	ata_sff_dumb_qc_prep - Prepare taskfile for submission
@@ -217,6 +228,7 @@ void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc)
 
 	ata_fill_sg_dumb(qc);
 }
+EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
 
 /**
  *	ata_sff_check_status - Read device status reg & clear interrupt
@@ -233,6 +245,7 @@ u8 ata_sff_check_status(struct ata_port *ap)
 {
 	return ioread8(ap->ioaddr.status_addr);
 }
+EXPORT_SYMBOL_GPL(ata_sff_check_status);
 
 /**
  *	ata_sff_altstatus - Read device alternate status reg
@@ -275,7 +288,7 @@ static u8 ata_sff_irq_status(struct ata_port *ap)
 		status = ata_sff_altstatus(ap);
 		/* Not us: We are busy */
 		if (status & ATA_BUSY)
-		    	return status;
+			return status;
 	}
 	/* Clear INTRQ latch */
 	status = ap->ops->sff_check_status(ap);
@@ -319,6 +332,7 @@ void ata_sff_pause(struct ata_port *ap)
 	ata_sff_sync(ap);
 	ndelay(400);
 }
+EXPORT_SYMBOL_GPL(ata_sff_pause);
 
 /**
  *	ata_sff_dma_pause	-	Pause before commencing DMA
@@ -327,7 +341,7 @@ void ata_sff_pause(struct ata_port *ap)
  *	Perform I/O fencing and ensure sufficient cycle delays occur
  *	for the HDMA1:0 transition
  */
- 
+
 void ata_sff_dma_pause(struct ata_port *ap)
 {
 	if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) {
@@ -341,6 +355,7 @@ void ata_sff_dma_pause(struct ata_port *ap)
 	   corruption. */
 	BUG();
 }
+EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
 
 /**
  *	ata_sff_busy_sleep - sleep until BSY clears, or timeout
@@ -396,6 +411,7 @@ int ata_sff_busy_sleep(struct ata_port *ap,
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
 
 static int ata_sff_check_ready(struct ata_link *link)
 {
@@ -422,6 +438,7 @@ int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline)
 {
 	return ata_wait_ready(link, deadline, ata_sff_check_ready);
 }
+EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
 
 /**
  *	ata_sff_dev_select - Select device 0/1 on ATA bus
@@ -449,6 +466,7 @@ void ata_sff_dev_select(struct ata_port *ap, unsigned int device)
 	iowrite8(tmp, ap->ioaddr.device_addr);
 	ata_sff_pause(ap);	/* needed; also flushes, for mmio */
 }
+EXPORT_SYMBOL_GPL(ata_sff_dev_select);
 
 /**
  *	ata_dev_select - Select device 0/1 on ATA bus
@@ -513,6 +531,7 @@ u8 ata_sff_irq_on(struct ata_port *ap)
 
 	return tmp;
 }
+EXPORT_SYMBOL_GPL(ata_sff_irq_on);
 
 /**
  *	ata_sff_irq_clear - Clear PCI IDE BMDMA interrupt.
@@ -534,6 +553,7 @@ void ata_sff_irq_clear(struct ata_port *ap)
 
 	iowrite8(ioread8(mmio + ATA_DMA_STATUS), mmio + ATA_DMA_STATUS);
 }
+EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
 
 /**
  *	ata_sff_tf_load - send taskfile registers to host controller
@@ -593,6 +613,7 @@ void ata_sff_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 
 	ata_wait_idle(ap);
 }
+EXPORT_SYMBOL_GPL(ata_sff_tf_load);
 
 /**
  *	ata_sff_tf_read - input device's ATA taskfile shadow registers
@@ -633,6 +654,7 @@ void ata_sff_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
 			WARN_ON(1);
 	}
 }
+EXPORT_SYMBOL_GPL(ata_sff_tf_read);
 
 /**
  *	ata_sff_exec_command - issue ATA command to host controller
@@ -652,6 +674,7 @@ void ata_sff_exec_command(struct ata_port *ap, const struct ata_taskfile *tf)
 	iowrite8(tf->command, ap->ioaddr.command_addr);
 	ata_sff_pause(ap);
 }
+EXPORT_SYMBOL_GPL(ata_sff_exec_command);
 
 /**
  *	ata_tf_to_host - issue ATA taskfile to host controller
@@ -717,6 +740,53 @@ unsigned int ata_sff_data_xfer(struct ata_device *dev, unsigned char *buf,
 
 	return words << 1;
 }
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
+
+/**
+ *	ata_sff_data_xfer32 - Transfer data by PIO
+ *	@dev: device to target
+ *	@buf: data buffer
+ *	@buflen: buffer length
+ *	@rw: read/write
+ *
+ *	Transfer data from/to the device data register by PIO using 32bit
+ *	I/O operations.
+ *
+ *	LOCKING:
+ *	Inherited from caller.
+ *
+ *	RETURNS:
+ *	Bytes consumed.
+ */
+
+unsigned int ata_sff_data_xfer32(struct ata_device *dev, unsigned char *buf,
+			       unsigned int buflen, int rw)
+{
+	struct ata_port *ap = dev->link->ap;
+	void __iomem *data_addr = ap->ioaddr.data_addr;
+	unsigned int words = buflen >> 2;
+	int slop = buflen & 3;
+
+	/* Transfer multiple of 4 bytes */
+	if (rw == READ)
+		ioread32_rep(data_addr, buf, words);
+	else
+		iowrite32_rep(data_addr, buf, words);
+
+	if (unlikely(slop)) {
+		__le32 pad;
+		if (rw == READ) {
+			pad = cpu_to_le32(ioread32(ap->ioaddr.data_addr));
+			memcpy(buf + buflen - slop, &pad, slop);
+		} else {
+			memcpy(&pad, buf + buflen - slop, slop);
+			iowrite32(le32_to_cpu(pad), ap->ioaddr.data_addr);
+		}
+		words++;
+	}
+	return words << 2;
+}
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer32);
 
 /**
  *	ata_sff_data_xfer_noirq - Transfer data by PIO
@@ -746,6 +816,7 @@ unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev, unsigned char *buf,
 
 	return consumed;
 }
+EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
 
 /**
  *	ata_pio_sector - Transfer a sector of data.
@@ -922,13 +993,15 @@ next_sg:
 		buf = kmap_atomic(page, KM_IRQ0);
 
 		/* do the actual data transfer */
-		consumed = ap->ops->sff_data_xfer(dev,  buf + offset, count, rw);
+		consumed = ap->ops->sff_data_xfer(dev,  buf + offset,
+								count, rw);
 
 		kunmap_atomic(buf, KM_IRQ0);
 		local_irq_restore(flags);
 	} else {
 		buf = page_address(page);
-		consumed = ap->ops->sff_data_xfer(dev,  buf + offset, count, rw);
+		consumed = ap->ops->sff_data_xfer(dev,  buf + offset,
+								count, rw);
 	}
 
 	bytes -= min(bytes, consumed);
@@ -1013,18 +1086,19 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
  *	RETURNS:
  *	1 if ok in workqueue, 0 otherwise.
  */
-static inline int ata_hsm_ok_in_wq(struct ata_port *ap, struct ata_queued_cmd *qc)
+static inline int ata_hsm_ok_in_wq(struct ata_port *ap,
+						struct ata_queued_cmd *qc)
 {
 	if (qc->tf.flags & ATA_TFLAG_POLLING)
 		return 1;
 
 	if (ap->hsm_task_state == HSM_ST_FIRST) {
 		if (qc->tf.protocol == ATA_PROT_PIO &&
-		    (qc->tf.flags & ATA_TFLAG_WRITE))
+		   (qc->tf.flags & ATA_TFLAG_WRITE))
 		    return 1;
 
 		if (ata_is_atapi(qc->tf.protocol) &&
-		    !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
+		   !(qc->dev->flags & ATA_DFLAG_CDB_INTR))
 			return 1;
 	}
 
@@ -1338,6 +1412,7 @@ fsm_start:
 
 	return poll_next;
 }
+EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
 
 void ata_pio_task(struct work_struct *work)
 {
@@ -1507,6 +1582,7 @@ unsigned int ata_sff_qc_issue(struct ata_queued_cmd *qc)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
 
 /**
  *	ata_sff_qc_fill_rtf - fill result TF using ->sff_tf_read
@@ -1526,6 +1602,7 @@ bool ata_sff_qc_fill_rtf(struct ata_queued_cmd *qc)
 	qc->ap->ops->sff_tf_read(qc->ap, &qc->result_tf);
 	return true;
 }
+EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
 
 /**
  *	ata_sff_host_intr - Handle host interrupt for given (port, task)
@@ -1623,6 +1700,7 @@ idle_irq:
 #endif
 	return 0;	/* irq not handled */
 }
+EXPORT_SYMBOL_GPL(ata_sff_host_intr);
 
 /**
  *	ata_sff_interrupt - Default ATA host interrupt handler
@@ -1667,6 +1745,7 @@ irqreturn_t ata_sff_interrupt(int irq, void *dev_instance)
 
 	return IRQ_RETVAL(handled);
 }
+EXPORT_SYMBOL_GPL(ata_sff_interrupt);
 
 /**
  *	ata_sff_freeze - Freeze SFF controller port
@@ -1695,6 +1774,7 @@ void ata_sff_freeze(struct ata_port *ap)
 
 	ap->ops->sff_irq_clear(ap);
 }
+EXPORT_SYMBOL_GPL(ata_sff_freeze);
 
 /**
  *	ata_sff_thaw - Thaw SFF controller port
@@ -1712,6 +1792,7 @@ void ata_sff_thaw(struct ata_port *ap)
 	ap->ops->sff_irq_clear(ap);
 	ap->ops->sff_irq_on(ap);
 }
+EXPORT_SYMBOL_GPL(ata_sff_thaw);
 
 /**
  *	ata_sff_prereset - prepare SFF link for reset
@@ -1753,6 +1834,7 @@ int ata_sff_prereset(struct ata_link *link, unsigned long deadline)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_sff_prereset);
 
 /**
  *	ata_devchk - PATA device presence detection
@@ -1865,6 +1947,7 @@ unsigned int ata_sff_dev_classify(struct ata_device *dev, int present,
 
 	return class;
 }
+EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
 
 /**
  *	ata_sff_wait_after_reset - wait for devices to become ready after reset
@@ -1941,6 +2024,7 @@ int ata_sff_wait_after_reset(struct ata_link *link, unsigned int devmask,
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
 
 static int ata_bus_softreset(struct ata_port *ap, unsigned int devmask,
 			     unsigned long deadline)
@@ -2013,6 +2097,7 @@ int ata_sff_softreset(struct ata_link *link, unsigned int *classes,
 	DPRINTK("EXIT, classes[0]=%u [1]=%u\n", classes[0], classes[1]);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_sff_softreset);
 
 /**
  *	sata_sff_hardreset - reset host port via SATA phy reset
@@ -2045,6 +2130,7 @@ int sata_sff_hardreset(struct ata_link *link, unsigned int *class,
 	DPRINTK("EXIT, class=%u\n", *class);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(sata_sff_hardreset);
 
 /**
  *	ata_sff_postreset - SFF postreset callback
@@ -2080,6 +2166,7 @@ void ata_sff_postreset(struct ata_link *link, unsigned int *classes)
 	if (ap->ioaddr.ctl_addr)
 		iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
 }
+EXPORT_SYMBOL_GPL(ata_sff_postreset);
 
 /**
  *	ata_sff_error_handler - Stock error handler for BMDMA controller
@@ -2152,6 +2239,7 @@ void ata_sff_error_handler(struct ata_port *ap)
 	ata_do_eh(ap, ap->ops->prereset, softreset, hardreset,
 		  ap->ops->postreset);
 }
+EXPORT_SYMBOL_GPL(ata_sff_error_handler);
 
 /**
  *	ata_sff_post_internal_cmd - Stock post_internal_cmd for SFF controller
@@ -2174,6 +2262,7 @@ void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc)
 
 	spin_unlock_irqrestore(ap->lock, flags);
 }
+EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
 
 /**
  *	ata_sff_port_start - Set port up for dma.
@@ -2194,6 +2283,7 @@ int ata_sff_port_start(struct ata_port *ap)
 		return ata_port_start(ap);
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_sff_port_start);
 
 /**
  *	ata_sff_std_ports - initialize ioaddr with standard port offsets.
@@ -2219,6 +2309,7 @@ void ata_sff_std_ports(struct ata_ioports *ioaddr)
 	ioaddr->status_addr = ioaddr->cmd_addr + ATA_REG_STATUS;
 	ioaddr->command_addr = ioaddr->cmd_addr + ATA_REG_CMD;
 }
+EXPORT_SYMBOL_GPL(ata_sff_std_ports);
 
 unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
 				    unsigned long xfer_mask)
@@ -2230,6 +2321,7 @@ unsigned long ata_bmdma_mode_filter(struct ata_device *adev,
 		xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA);
 	return xfer_mask;
 }
+EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
 
 /**
  *	ata_bmdma_setup - Set up PCI IDE BMDMA transaction
@@ -2258,6 +2350,7 @@ void ata_bmdma_setup(struct ata_queued_cmd *qc)
 	/* issue r/w command */
 	ap->ops->sff_exec_command(ap, &qc->tf);
 }
+EXPORT_SYMBOL_GPL(ata_bmdma_setup);
 
 /**
  *	ata_bmdma_start - Start a PCI IDE BMDMA transaction
@@ -2290,6 +2383,7 @@ void ata_bmdma_start(struct ata_queued_cmd *qc)
 	 * unneccessarily delayed for MMIO
 	 */
 }
+EXPORT_SYMBOL_GPL(ata_bmdma_start);
 
 /**
  *	ata_bmdma_stop - Stop PCI IDE BMDMA transfer
@@ -2314,6 +2408,7 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc)
 	/* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */
 	ata_sff_dma_pause(ap);
 }
+EXPORT_SYMBOL_GPL(ata_bmdma_stop);
 
 /**
  *	ata_bmdma_status - Read PCI IDE BMDMA status
@@ -2330,6 +2425,7 @@ u8 ata_bmdma_status(struct ata_port *ap)
 {
 	return ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
 }
+EXPORT_SYMBOL_GPL(ata_bmdma_status);
 
 /**
  *	ata_bus_reset - reset host port and associated ATA channel
@@ -2422,6 +2518,7 @@ err_out:
 
 	DPRINTK("EXIT\n");
 }
+EXPORT_SYMBOL_GPL(ata_bus_reset);
 
 #ifdef CONFIG_PCI
 
@@ -2449,6 +2546,7 @@ int ata_pci_bmdma_clear_simplex(struct pci_dev *pdev)
 		return -EOPNOTSUPP;
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
 
 /**
  *	ata_pci_bmdma_init - acquire PCI BMDMA resources and init ATA host
@@ -2501,11 +2599,12 @@ int ata_pci_bmdma_init(struct ata_host *host)
 			host->flags |= ATA_HOST_SIMPLEX;
 
 		ata_port_desc(ap, "bmdma 0x%llx",
-			(unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
+		    (unsigned long long)pci_resource_start(pdev, 4) + 8 * i);
 	}
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
 
 static int ata_resources_present(struct pci_dev *pdev, int port)
 {
@@ -2513,7 +2612,7 @@ static int ata_resources_present(struct pci_dev *pdev, int port)
 
 	/* Check the PCI resources for this channel are enabled */
 	port = port * 2;
-	for (i = 0; i < 2; i ++) {
+	for (i = 0; i < 2; i++) {
 		if (pci_resource_start(pdev, port + i) == 0 ||
 		    pci_resource_len(pdev, port + i) == 0)
 			return 0;
@@ -2598,6 +2697,7 @@ int ata_pci_sff_init_host(struct ata_host *host)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
 
 /**
  *	ata_pci_sff_prepare_host - helper to prepare native PCI ATA host
@@ -2615,7 +2715,7 @@ int ata_pci_sff_init_host(struct ata_host *host)
  *	0 on success, -errno otherwise.
  */
 int ata_pci_sff_prepare_host(struct pci_dev *pdev,
-			     const struct ata_port_info * const * ppi,
+			     const struct ata_port_info * const *ppi,
 			     struct ata_host **r_host)
 {
 	struct ata_host *host;
@@ -2645,17 +2745,18 @@ int ata_pci_sff_prepare_host(struct pci_dev *pdev,
 	*r_host = host;
 	return 0;
 
- err_bmdma:
+err_bmdma:
 	/* This is necessary because PCI and iomap resources are
 	 * merged and releasing the top group won't release the
 	 * acquired resources if some of those have been acquired
 	 * before entering this function.
 	 */
 	pcim_iounmap_regions(pdev, 0xf);
- err_out:
+err_out:
 	devres_release_group(&pdev->dev, NULL);
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
 
 /**
  *	ata_pci_sff_activate_host - start SFF host, request IRQ and register it
@@ -2741,7 +2842,7 @@ int ata_pci_sff_activate_host(struct ata_host *host,
 	}
 
 	rc = ata_host_register(host, sht);
- out:
+out:
 	if (rc == 0)
 		devres_remove_group(dev, NULL);
 	else
@@ -2749,6 +2850,7 @@ int ata_pci_sff_activate_host(struct ata_host *host,
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
 
 /**
  *	ata_pci_sff_init_one - Initialize/register PCI IDE host controller
@@ -2776,7 +2878,7 @@ int ata_pci_sff_activate_host(struct ata_host *host,
  *	Zero on success, negative on errno-based value on error.
  */
 int ata_pci_sff_init_one(struct pci_dev *pdev,
-			 const struct ata_port_info * const * ppi,
+			 const struct ata_port_info * const *ppi,
 			 struct scsi_host_template *sht, void *host_priv)
 {
 	struct device *dev = &pdev->dev;
@@ -2815,7 +2917,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 
 	pci_set_master(pdev);
 	rc = ata_pci_sff_activate_host(host, ata_sff_interrupt, sht);
- out:
+out:
 	if (rc == 0)
 		devres_remove_group(&pdev->dev, NULL);
 	else
@@ -2823,54 +2925,7 @@ int ata_pci_sff_init_one(struct pci_dev *pdev,
 
 	return rc;
 }
+EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
 
 #endif /* CONFIG_PCI */
 
-EXPORT_SYMBOL_GPL(ata_sff_port_ops);
-EXPORT_SYMBOL_GPL(ata_bmdma_port_ops);
-EXPORT_SYMBOL_GPL(ata_sff_qc_prep);
-EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep);
-EXPORT_SYMBOL_GPL(ata_sff_dev_select);
-EXPORT_SYMBOL_GPL(ata_sff_check_status);
-EXPORT_SYMBOL_GPL(ata_sff_dma_pause);
-EXPORT_SYMBOL_GPL(ata_sff_pause);
-EXPORT_SYMBOL_GPL(ata_sff_busy_sleep);
-EXPORT_SYMBOL_GPL(ata_sff_wait_ready);
-EXPORT_SYMBOL_GPL(ata_sff_tf_load);
-EXPORT_SYMBOL_GPL(ata_sff_tf_read);
-EXPORT_SYMBOL_GPL(ata_sff_exec_command);
-EXPORT_SYMBOL_GPL(ata_sff_data_xfer);
-EXPORT_SYMBOL_GPL(ata_sff_data_xfer_noirq);
-EXPORT_SYMBOL_GPL(ata_sff_irq_on);
-EXPORT_SYMBOL_GPL(ata_sff_irq_clear);
-EXPORT_SYMBOL_GPL(ata_sff_hsm_move);
-EXPORT_SYMBOL_GPL(ata_sff_qc_issue);
-EXPORT_SYMBOL_GPL(ata_sff_qc_fill_rtf);
-EXPORT_SYMBOL_GPL(ata_sff_host_intr);
-EXPORT_SYMBOL_GPL(ata_sff_interrupt);
-EXPORT_SYMBOL_GPL(ata_sff_freeze);
-EXPORT_SYMBOL_GPL(ata_sff_thaw);
-EXPORT_SYMBOL_GPL(ata_sff_prereset);
-EXPORT_SYMBOL_GPL(ata_sff_dev_classify);
-EXPORT_SYMBOL_GPL(ata_sff_wait_after_reset);
-EXPORT_SYMBOL_GPL(ata_sff_softreset);
-EXPORT_SYMBOL_GPL(sata_sff_hardreset);
-EXPORT_SYMBOL_GPL(ata_sff_postreset);
-EXPORT_SYMBOL_GPL(ata_sff_error_handler);
-EXPORT_SYMBOL_GPL(ata_sff_post_internal_cmd);
-EXPORT_SYMBOL_GPL(ata_sff_port_start);
-EXPORT_SYMBOL_GPL(ata_sff_std_ports);
-EXPORT_SYMBOL_GPL(ata_bmdma_mode_filter);
-EXPORT_SYMBOL_GPL(ata_bmdma_setup);
-EXPORT_SYMBOL_GPL(ata_bmdma_start);
-EXPORT_SYMBOL_GPL(ata_bmdma_stop);
-EXPORT_SYMBOL_GPL(ata_bmdma_status);
-EXPORT_SYMBOL_GPL(ata_bus_reset);
-#ifdef CONFIG_PCI
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_clear_simplex);
-EXPORT_SYMBOL_GPL(ata_pci_bmdma_init);
-EXPORT_SYMBOL_GPL(ata_pci_sff_init_host);
-EXPORT_SYMBOL_GPL(ata_pci_sff_prepare_host);
-EXPORT_SYMBOL_GPL(ata_pci_sff_activate_host);
-EXPORT_SYMBOL_GPL(ata_pci_sff_init_one);
-#endif /* CONFIG_PCI */
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 73c466e..a7999c1 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -19,7 +19,9 @@
  *
  *  TODO/CHECK
  *	Cannot have ATAPI on both master & slave for rev < c2 (???) but
- *	otherwise should do atapi DMA.
+ *	otherwise should do atapi DMA (For now for old we do PIO only for
+ *	ATAPI)
+ *	Review Sunblade workaround.
  */
 
 #include <linux/kernel.h>
@@ -33,12 +35,14 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.5"
+#define DRV_VERSION "0.7.8"
 
 static int ali_atapi_dma = 0;
 module_param_named(atapi_dma, ali_atapi_dma, int, 0644);
 MODULE_PARM_DESC(atapi_dma, "Enable ATAPI DMA (0=disable, 1=enable)");
 
+static struct pci_dev *isa_bridge;
+
 /*
  *	Cable special cases
  */
@@ -147,8 +151,7 @@ static void ali_fifo_control(struct ata_port *ap, struct ata_device *adev, int o
 
 	pci_read_config_byte(pdev, pio_fifo, &fifo);
 	fifo &= ~(0x0F << shift);
-	if (on)
-		fifo |= (on << shift);
+	fifo |= (on << shift);
 	pci_write_config_byte(pdev, pio_fifo, fifo);
 }
 
@@ -337,6 +340,23 @@ static int ali_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+static void ali_c2_c3_postreset(struct ata_link *link, unsigned int *classes)
+{
+	u8 r;
+	int port_bit = 4 << link->ap->port_no;
+
+	/* If our bridge is an ALI 1533 then do the extra work */
+	if (isa_bridge) {
+		/* Tristate and re-enable the bus signals */
+		pci_read_config_byte(isa_bridge, 0x58, &r);
+		r &= ~port_bit;
+		pci_write_config_byte(isa_bridge, 0x58, r);
+		r |= port_bit;
+		pci_write_config_byte(isa_bridge, 0x58, r);
+	}
+	ata_sff_postreset(link, classes);
+}
+
 static struct scsi_host_template ali_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -349,10 +369,11 @@ static struct ata_port_operations ali_early_port_ops = {
 	.inherits	= &ata_sff_port_ops,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= ali_set_piomode,
+	.sff_data_xfer  = ata_sff_data_xfer32,
 };
 
 static const struct ata_port_operations ali_dma_base_ops = {
-	.inherits	= &ata_bmdma_port_ops,
+	.inherits	= &ata_bmdma32_port_ops,
 	.set_piomode	= ali_set_piomode,
 	.set_dmamode	= ali_set_dmamode,
 };
@@ -377,6 +398,17 @@ static struct ata_port_operations ali_c2_port_ops = {
 	.check_atapi_dma = ali_check_atapi_dma,
 	.cable_detect	= ali_c2_cable_detect,
 	.dev_config	= ali_lock_sectors,
+	.postreset	= ali_c2_c3_postreset,
+};
+
+/*
+ *	Port operations for DMA capable ALi with cable detect
+ */
+static struct ata_port_operations ali_c4_port_ops = {
+	.inherits	= &ali_dma_base_ops,
+	.check_atapi_dma = ali_check_atapi_dma,
+	.cable_detect	= ali_c2_cable_detect,
+	.dev_config	= ali_lock_sectors,
 };
 
 /*
@@ -401,52 +433,49 @@ static struct ata_port_operations ali_c5_port_ops = {
 static void ali_init_chipset(struct pci_dev *pdev)
 {
 	u8 tmp;
-	struct pci_dev *north, *isa_bridge;
+	struct pci_dev *north;
 
 	/*
 	 * The chipset revision selects the driver operations and
 	 * mode data.
 	 */
 
-	if (pdev->revision >= 0x20 && pdev->revision < 0xC2) {
-		/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
-		pci_read_config_byte(pdev, 0x4B, &tmp);
-		/* Clear CD-ROM DMA write bit */
-		tmp &= 0x7F;
-		pci_write_config_byte(pdev, 0x4B, tmp);
-	} else if (pdev->revision >= 0xC2) {
-		/* Enable cable detection logic */
+	if (pdev->revision <= 0x20) {
+		pci_read_config_byte(pdev, 0x53, &tmp);
+		tmp |= 0x03;
+		pci_write_config_byte(pdev, 0x53, tmp);
+	} else {
+		pci_read_config_byte(pdev, 0x4a, &tmp);
+		pci_write_config_byte(pdev, 0x4a, tmp | 0x20);
 		pci_read_config_byte(pdev, 0x4B, &tmp);
-		pci_write_config_byte(pdev, 0x4B, tmp | 0x08);
-	}
-	north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
-	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
-	if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
-		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
-		   Set the south bridge enable bit */
-		pci_read_config_byte(isa_bridge, 0x79, &tmp);
-		if (pdev->revision == 0xC2)
-			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
-		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
-			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
-	}
-	if (pdev->revision >= 0x20) {
+		if (pdev->revision < 0xC2)
+			/* 1543-E/F, 1543C-C, 1543C-D, 1543C-E */
+			/* Clear CD-ROM DMA write bit */
+			tmp &= 0x7F;
+		/* Cable and UDMA */
+		pci_write_config_byte(pdev, 0x4B, tmp | 0x09);
 		/*
 		 * CD_ROM DMA on (0x53 bit 0). Enable this even if we want
 		 * to use PIO. 0x53 bit 1 (rev 20 only) - enable FIFO control
 		 * via 0x54/55.
 		 */
 		pci_read_config_byte(pdev, 0x53, &tmp);
-		if (pdev->revision <= 0x20)
-			tmp &= ~0x02;
 		if (pdev->revision >= 0xc7)
 			tmp |= 0x03;
 		else
 			tmp |= 0x01;	/* CD_ROM enable for DMA */
 		pci_write_config_byte(pdev, 0x53, tmp);
 	}
-	pci_dev_put(isa_bridge);
+	north = pci_get_bus_and_slot(0, PCI_DEVFN(0,0));
+	if (north && north->vendor == PCI_VENDOR_ID_AL && isa_bridge) {
+		/* Configure the ALi bridge logic. For non ALi rely on BIOS.
+		   Set the south bridge enable bit */
+		pci_read_config_byte(isa_bridge, 0x79, &tmp);
+		if (pdev->revision == 0xC2)
+			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x04);
+		else if (pdev->revision > 0xC2 && pdev->revision < 0xC5)
+			pci_write_config_byte(isa_bridge, 0x79, tmp | 0x02);
+	}
 	pci_dev_put(north);
 	ata_pci_bmdma_clear_simplex(pdev);
 }
@@ -503,7 +532,7 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
 		.udma_mask = ATA_UDMA5,
-		.port_ops = &ali_c2_port_ops
+		.port_ops = &ali_c4_port_ops
 	};
 	/* Revision 0xC5 is UDMA133 with LBA48 DMA */
 	static const struct ata_port_info info_c5 = {
@@ -516,7 +545,6 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	u8 tmp;
-	struct pci_dev *isa_bridge;
 	int rc;
 
 	rc = pcim_enable_device(pdev);
@@ -543,14 +571,12 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	ali_init_chipset(pdev);
 
-	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
 	if (isa_bridge && pdev->revision >= 0x20 && pdev->revision < 0xC2) {
 		/* Are we paired with a UDMA capable chip */
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
 	        	ppi[0] = &info_20_udma;
 	}
-	pci_dev_put(isa_bridge);
 
 	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
@@ -590,13 +616,20 @@ static struct pci_driver ali_pci_driver = {
 
 static int __init ali_init(void)
 {
-	return pci_register_driver(&ali_pci_driver);
+	int ret;
+	isa_bridge = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
+
+	ret = pci_register_driver(&ali_pci_driver);
+	if (ret < 0)
+		pci_dev_put(isa_bridge);
+	return ret;
 }
 
 
 static void __exit ali_exit(void)
 {
 	pci_unregister_driver(&ali_pci_driver);
+	pci_dev_put(isa_bridge);
 }
 
 
diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c
index 0ec9c7d..63719ab 100644
--- a/drivers/ata/pata_amd.c
+++ b/drivers/ata/pata_amd.c
@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.3.10"
+#define DRV_VERSION "0.3.11"
 
 /**
  *	timing_setup		-	shared timing computation and load
@@ -345,7 +345,7 @@ static struct scsi_host_template amd_sht = {
 };
 
 static const struct ata_port_operations amd_base_port_ops = {
-	.inherits	= &ata_bmdma_port_ops,
+	.inherits	= &ata_bmdma32_port_ops,
 	.prereset	= amd_pre_reset,
 };
 
diff --git a/drivers/ata/pata_hpt366.c b/drivers/ata/pata_hpt366.c
index e0c4f05..65c28e5 100644
--- a/drivers/ata/pata_hpt366.c
+++ b/drivers/ata/pata_hpt366.c
@@ -30,7 +30,7 @@
 #define DRV_VERSION	"0.6.2"
 
 struct hpt_clock {
-	u8	xfer_speed;
+	u8	xfer_mode;
 	u32	timing;
 };
 
@@ -189,28 +189,6 @@ static unsigned long hpt366_filter(struct ata_device *adev, unsigned long mask)
 	return ata_bmdma_mode_filter(adev, mask);
 }
 
-/**
- *	hpt36x_find_mode	-	reset the hpt36x bus
- *	@ap: ATA port
- *	@speed: transfer mode
- *
- *	Return the 32bit register programming information for this channel
- *	that matches the speed provided.
- */
-
-static u32 hpt36x_find_mode(struct ata_port *ap, int speed)
-{
-	struct hpt_clock *clocks = ap->host->private_data;
-
-	while(clocks->xfer_speed) {
-		if (clocks->xfer_speed == speed)
-			return clocks->timing;
-		clocks++;
-	}
-	BUG();
-	return 0xffffffffU;	/* silence compiler warning */
-}
-
 static int hpt36x_cable_detect(struct ata_port *ap)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
@@ -226,25 +204,16 @@ static int hpt36x_cable_detect(struct ata_port *ap)
 	return ATA_CBL_PATA80;
 }
 
-/**
- *	hpt366_set_piomode		-	PIO setup
- *	@ap: ATA interface
- *	@adev: device on the interface
- *
- *	Perform PIO mode setup.
- */
-
-static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
+static void hpt366_set_mode(struct ata_port *ap, struct ata_device *adev,
+			    u8 mode)
 {
+	struct hpt_clock *clocks = ap->host->private_data;
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u32 addr1, addr2;
-	u32 reg;
-	u32 mode;
+	u32 addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
+	u32 addr2 = 0x51 + 4 * ap->port_no;
+	u32 mask, reg;
 	u8 fast;
 
-	addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
-	addr2 = 0x51 + 4 * ap->port_no;
-
 	/* Fast interrupt prediction disable, hold off interrupt disable */
 	pci_read_config_byte(pdev, addr2, &fast);
 	if (fast & 0x80) {
@@ -252,12 +221,43 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
 		pci_write_config_byte(pdev, addr2, fast);
 	}
 
+	/* determine timing mask and find matching clock entry */
+	if (mode < XFER_MW_DMA_0)
+		mask = 0xc1f8ffff;
+	else if (mode < XFER_UDMA_0)
+		mask = 0x303800ff;
+	else
+		mask = 0x30070000;
+
+	while (clocks->xfer_mode) {
+		if (clocks->xfer_mode == mode)
+			break;
+		clocks++;
+	}
+	if (!clocks->xfer_mode)
+		BUG();
+
+	/*
+	 * Combine new mode bits with old config bits and disable
+	 * on-chip PIO FIFO/buffer (and PIO MST mode as well) to avoid
+	 * problems handling I/O errors later.
+	 */
 	pci_read_config_dword(pdev, addr1, &reg);
-	mode = hpt36x_find_mode(ap, adev->pio_mode);
-	mode &= ~0x8000000;	/* No FIFO in PIO */
-	mode &= ~0x30070000;	/* Leave config bits alone */
-	reg &= 0x30070000;	/* Strip timing bits */
-	pci_write_config_dword(pdev, addr1, reg | mode);
+	reg = ((reg & ~mask) | (clocks->timing & mask)) & ~0xc0000000;
+	pci_write_config_dword(pdev, addr1, reg);
+}
+
+/**
+ *	hpt366_set_piomode		-	PIO setup
+ *	@ap: ATA interface
+ *	@adev: device on the interface
+ *
+ *	Perform PIO mode setup.
+ */
+
+static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	hpt366_set_mode(ap, adev, adev->pio_mode);
 }
 
 /**
@@ -271,28 +271,7 @@ static void hpt366_set_piomode(struct ata_port *ap, struct ata_device *adev)
 
 static void hpt366_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 {
-	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u32 addr1, addr2;
-	u32 reg;
-	u32 mode;
-	u8 fast;
-
-	addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
-	addr2 = 0x51 + 4 * ap->port_no;
-
-	/* Fast interrupt prediction disable, hold off interrupt disable */
-	pci_read_config_byte(pdev, addr2, &fast);
-	if (fast & 0x80) {
-		fast &= ~0x80;
-		pci_write_config_byte(pdev, addr2, fast);
-	}
-
-	pci_read_config_dword(pdev, addr1, &reg);
-	mode = hpt36x_find_mode(ap, adev->dma_mode);
-	mode |= 0x8000000;	/* FIFO in MWDMA or UDMA */
-	mode &= ~0xC0000000;	/* Leave config bits alone */
-	reg &= 0xC0000000;	/* Strip timing bits */
-	pci_write_config_dword(pdev, addr1, reg | mode);
+	hpt366_set_mode(ap, adev, adev->dma_mode);
 }
 
 static struct scsi_host_template hpt36x_sht = {
diff --git a/drivers/ata/pata_hpt3x3.c b/drivers/ata/pata_hpt3x3.c
index f11a320..f19cc64 100644
--- a/drivers/ata/pata_hpt3x3.c
+++ b/drivers/ata/pata_hpt3x3.c
@@ -23,7 +23,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x3"
-#define DRV_VERSION	"0.5.3"
+#define DRV_VERSION	"0.6.1"
 
 /**
  *	hpt3x3_set_piomode		-	PIO setup
@@ -80,14 +80,48 @@ static void hpt3x3_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	r2 &= ~(0x11 << dn);	/* Clear MWDMA and UDMA bits */
 
 	if (adev->dma_mode >= XFER_UDMA_0)
-		r2 |= (0x10 << dn);	/* Ultra mode */
+		r2 |= (0x01 << dn);	/* Ultra mode */
 	else
-		r2 |= (0x01 << dn);	/* MWDMA */
+		r2 |= (0x10 << dn);	/* MWDMA */
 
 	pci_write_config_dword(pdev, 0x44, r1);
 	pci_write_config_dword(pdev, 0x48, r2);
 }
-#endif /* CONFIG_PATA_HPT3X3_DMA */
+
+/**
+ *	hpt3x3_freeze		-	DMA workaround
+ *	@ap: port to freeze
+ *
+ *	When freezing an HPT3x3 we must stop any pending DMA before
+ *	writing to the control register or the chip will hang
+ */
+
+static void hpt3x3_freeze(struct ata_port *ap)
+{
+	void __iomem *mmio = ap->ioaddr.bmdma_addr;
+
+	iowrite8(ioread8(mmio + ATA_DMA_CMD) & ~ ATA_DMA_START,
+			mmio + ATA_DMA_CMD);
+	ata_sff_dma_pause(ap);
+	ata_sff_freeze(ap);
+}
+
+/**
+ *	hpt3x3_bmdma_setup	-	DMA workaround
+ *	@qc: Queued command
+ *
+ *	When issuing BMDMA we must clean up the error/active bits in
+ *	software on this device
+ */
+
+static void hpt3x3_bmdma_setup(struct ata_queued_cmd *qc)
+{
+	struct ata_port *ap = qc->ap;
+	u8 r = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	r |= ATA_DMA_INTR | ATA_DMA_ERR;
+	iowrite8(r, ap->ioaddr.bmdma_addr + ATA_DMA_STATUS);
+	return ata_bmdma_setup(qc);
+}
 
 /**
  *	hpt3x3_atapi_dma	-	ATAPI DMA check
@@ -101,18 +135,23 @@ static int hpt3x3_atapi_dma(struct ata_queued_cmd *qc)
 	return 1;
 }
 
+#endif /* CONFIG_PATA_HPT3X3_DMA */
+
 static struct scsi_host_template hpt3x3_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
 
 static struct ata_port_operations hpt3x3_port_ops = {
 	.inherits	= &ata_bmdma_port_ops,
-	.check_atapi_dma= hpt3x3_atapi_dma,
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= hpt3x3_set_piomode,
 #if defined(CONFIG_PATA_HPT3X3_DMA)
 	.set_dmamode	= hpt3x3_set_dmamode,
+	.bmdma_setup	= hpt3x3_bmdma_setup,
+	.check_atapi_dma= hpt3x3_atapi_dma,
+	.freeze		= hpt3x3_freeze,
 #endif
+	
 };
 
 /**
diff --git a/drivers/ata/pata_mpiix.c b/drivers/ata/pata_mpiix.c
index 7c8faa4..aa576ca 100644
--- a/drivers/ata/pata_mpiix.c
+++ b/drivers/ata/pata_mpiix.c
@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_mpiix"
-#define DRV_VERSION "0.7.6"
+#define DRV_VERSION "0.7.7"
 
 enum {
 	IDETIM = 0x6C,		/* IDE control register */
@@ -146,6 +146,7 @@ static struct ata_port_operations mpiix_port_ops = {
 	.cable_detect	= ata_cable_40wire,
 	.set_piomode	= mpiix_set_piomode,
 	.prereset	= mpiix_pre_reset,
+	.sff_data_xfer	= ata_sff_data_xfer32,
 };
 
 static int mpiix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c
index 6afa07a..d8d743a 100644
--- a/drivers/ata/pata_platform.c
+++ b/drivers/ata/pata_platform.c
@@ -186,7 +186,7 @@ EXPORT_SYMBOL_GPL(__pata_platform_probe);
  *	A platform bus ATA device has been unplugged. Perform the needed
  *	cleanup. Also called on module unload for any active devices.
  */
-int __devexit __pata_platform_remove(struct device *dev)
+int __pata_platform_remove(struct device *dev)
 {
 	struct ata_host *host = dev_get_drvdata(dev);
 
diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c
index 83580a5..9e764e5 100644
--- a/drivers/ata/pata_sil680.c
+++ b/drivers/ata/pata_sil680.c
@@ -32,7 +32,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sil680"
-#define DRV_VERSION "0.4.8"
+#define DRV_VERSION "0.4.9"
 
 #define SIL680_MMIO_BAR		5
 
@@ -195,7 +195,7 @@ static struct scsi_host_template sil680_sht = {
 };
 
 static struct ata_port_operations sil680_port_ops = {
-	.inherits	= &ata_bmdma_port_ops,
+	.inherits	= &ata_bmdma32_port_ops,
 	.cable_detect	= sil680_cable_detect,
 	.set_piomode	= sil680_set_piomode,
 	.set_dmamode	= sil680_set_dmamode,
diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c
index ccee930..2590c22 100644
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -51,13 +51,6 @@ struct sil24_sge {
 	__le32	flags;
 };
 
-/*
- * Port multiplier
- */
-struct sil24_port_multiplier {
-	__le32	diag;
-	__le32	sactive;
-};
 
 enum {
 	SIL24_HOST_BAR		= 0,
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 3449de5..4f7c8fb 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -1518,6 +1518,7 @@ extern void sata_pmp_error_handler(struct ata_port *ap);
 
 extern const struct ata_port_operations ata_sff_port_ops;
 extern const struct ata_port_operations ata_bmdma_port_ops;
+extern const struct ata_port_operations ata_bmdma32_port_ops;
 
 /* PIO only, sg_tablesize and dma_boundary limits can be removed */
 #define ATA_PIO_SHT(drv_name)					\
@@ -1545,6 +1546,8 @@ extern void ata_sff_exec_command(struct ata_port *ap,
 				 const struct ata_taskfile *tf);
 extern unsigned int ata_sff_data_xfer(struct ata_device *dev,
 			unsigned char *buf, unsigned int buflen, int rw);
+extern unsigned int ata_sff_data_xfer32(struct ata_device *dev,
+			unsigned char *buf, unsigned int buflen, int rw);
 extern unsigned int ata_sff_data_xfer_noirq(struct ata_device *dev,
 			unsigned char *buf, unsigned int buflen, int rw);
 extern u8 ata_sff_irq_on(struct ata_port *ap);

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2008-08-22  7:04 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2008-08-22  7:04 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Main items of note:
* Tejun's error handling (soft/hard reset) fixes
* Tejun's sata_mv fix
* Alan's dma_mode fixes

pata_via is a cleanup not a fix, but it is cleaning up some
vendor mistakes, with a net decrease in code size.

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 Documentation/kernel-parameters.txt |    3 ++
 drivers/ata/ahci.c                  |    8 +++--
 drivers/ata/ata_piix.c              |    8 +++++
 drivers/ata/libata-core.c           |   60 +++++++++++++++++++++-------------
 drivers/ata/libata-eh.c             |   30 +++++++----------
 drivers/ata/pata_acpi.c             |    2 +-
 drivers/ata/pata_atiixp.c           |    2 +-
 drivers/ata/pata_cs5530.c           |    6 ++--
 drivers/ata/pata_it821x.c           |    2 +-
 drivers/ata/pata_oldpiix.c          |    2 +-
 drivers/ata/pata_sc1200.c           |    6 ++--
 drivers/ata/pata_via.c              |   59 ++++++----------------------------
 drivers/ata/sata_mv.c               |   37 +++++++--------------
 include/linux/libata.h              |   24 ++++++++++++++
 14 files changed, 123 insertions(+), 126 deletions(-)

Alan Cox (1):
      libata: Fix a large collection of DMA mode mismatches

Jeff Garzik (1):
      [libata] pata_it821x: fix warning

Saeed Bishara (1):
      sata_mv: add the Gen IIE flag to the SoC devices.

Seth Heasley (2):
      ahci: RAID mode SATA patch for Intel Ibex Peak DeviceIDs
      ata_piix: IDE Mode SATA patch for Intel Ibex Peak DeviceIDs

Tejun Heo (8):
      libata: implement no[hs]rst force params
      sata_mv: don't issue two DMA commands concurrently
      libata: fix EH action overwriting in ata_eh_reset()
      libata: always do follow-up SRST if hardreset returned -EAGAIN
      libata: use ata_link_printk() when printing SError
      libata: restore SControl on detach
      pata_via: clean up recent tf_load changes
      ahci: sis controllers actually can do PMP

diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index a897646..1150444 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1074,6 +1074,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 			* [no]ncq: Turn on or off NCQ.
 
+			* nohrst, nosrst, norst: suppress hard, soft
+                          and both resets.
+
 			If there are multiple matching configurations changing
 			the same attribute, the last one is used.
 
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index ef3e552..c729e69 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -486,6 +486,8 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x502b), board_ahci }, /* Tolapai */
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
@@ -575,9 +577,9 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci },		/* MCP7B */
 
 	/* SiS */
-	{ PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp },		/* SiS 966 */
-	{ PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp },		/* SiS 968 */
-	{ PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x1184), board_ahci },		/* SiS 966 */
+	{ PCI_VDEVICE(SI, 0x1185), board_ahci },		/* SiS 968 */
+	{ PCI_VDEVICE(SI, 0x0186), board_ahci },		/* SiS 968 */
 
 	/* Marvell */
 	{ PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv },	/* 6145 */
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index c294121..b1d08a8 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -275,6 +275,14 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	{ 0x8086, 0x3a20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH10) */
 	{ 0x8086, 0x3a26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b20, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b26, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata },
+	/* SATA Controller IDE (PCH) */
+	{ 0x8086, 0x3b2e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 
 	{ }	/* terminate list */
 };
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5ba96c5..79e3a8e 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -104,6 +104,7 @@ struct ata_force_param {
 	unsigned long	xfer_mask;
 	unsigned int	horkage_on;
 	unsigned int	horkage_off;
+	unsigned int	lflags;
 };
 
 struct ata_force_ent {
@@ -196,22 +197,23 @@ void ata_force_cbl(struct ata_port *ap)
 }
 
 /**
- *	ata_force_spd_limit - force SATA spd limit according to libata.force
+ *	ata_force_link_limits - force link limits according to libata.force
  *	@link: ATA link of interest
  *
- *	Force SATA spd limit according to libata.force and whine about
- *	it.  When only the port part is specified (e.g. 1:), the limit
- *	applies to all links connected to both the host link and all
- *	fan-out ports connected via PMP.  If the device part is
- *	specified as 0 (e.g. 1.00:), it specifies the first fan-out
- *	link not the host link.  Device number 15 always points to the
- *	host link whether PMP is attached or not.
+ *	Force link flags and SATA spd limit according to libata.force
+ *	and whine about it.  When only the port part is specified
+ *	(e.g. 1:), the limit applies to all links connected to both
+ *	the host link and all fan-out ports connected via PMP.  If the
+ *	device part is specified as 0 (e.g. 1.00:), it specifies the
+ *	first fan-out link not the host link.  Device number 15 always
+ *	points to the host link whether PMP is attached or not.
  *
  *	LOCKING:
  *	EH context.
  */
-static void ata_force_spd_limit(struct ata_link *link)
+static void ata_force_link_limits(struct ata_link *link)
 {
+	bool did_spd = false;
 	int linkno, i;
 
 	if (ata_is_host_link(link))
@@ -228,13 +230,22 @@ static void ata_force_spd_limit(struct ata_link *link)
 		if (fe->device != -1 && fe->device != linkno)
 			continue;
 
-		if (!fe->param.spd_limit)
-			continue;
+		/* only honor the first spd limit */
+		if (!did_spd && fe->param.spd_limit) {
+			link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: PHY spd limit set to %s\n",
+					fe->param.name);
+			did_spd = true;
+		}
 
-		link->hw_sata_spd_limit = (1 << fe->param.spd_limit) - 1;
-		ata_link_printk(link, KERN_NOTICE,
-			"FORCE: PHY spd limit set to %s\n", fe->param.name);
-		return;
+		/* let lflags stack */
+		if (fe->param.lflags) {
+			link->flags |= fe->param.lflags;
+			ata_link_printk(link, KERN_NOTICE,
+					"FORCE: link flag 0x%x forced -> 0x%x\n",
+					fe->param.lflags, link->flags);
+		}
 	}
 }
 
@@ -3277,7 +3288,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 		dev->dma_mode = ata_xfer_mask2mode(dma_mask);
 
 		found = 1;
-		if (dev->dma_mode != 0xff)
+		if (ata_dma_enabled(dev))
 			used_dma = 1;
 	}
 	if (!found)
@@ -3302,7 +3313,7 @@ int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev)
 
 	/* step 3: set host DMA timings */
 	ata_link_for_each_dev(dev, link) {
-		if (!ata_dev_enabled(dev) || dev->dma_mode == 0xff)
+		if (!ata_dev_enabled(dev) || !ata_dma_enabled(dev))
 			continue;
 
 		dev->xfer_mode = dev->dma_mode;
@@ -5188,19 +5199,18 @@ void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp)
  */
 int sata_link_init_spd(struct ata_link *link)
 {
-	u32 scontrol;
 	u8 spd;
 	int rc;
 
-	rc = sata_scr_read(link, SCR_CONTROL, &scontrol);
+	rc = sata_scr_read(link, SCR_CONTROL, &link->saved_scontrol);
 	if (rc)
 		return rc;
 
-	spd = (scontrol >> 4) & 0xf;
+	spd = (link->saved_scontrol >> 4) & 0xf;
 	if (spd)
 		link->hw_sata_spd_limit &= (1 << spd) - 1;
 
-	ata_force_spd_limit(link);
+	ata_force_link_limits(link);
 
 	link->sata_spd_limit = link->hw_sata_spd_limit;
 
@@ -5783,9 +5793,10 @@ static void ata_port_detach(struct ata_port *ap)
 	ata_port_wait_eh(ap);
 
 	/* EH is now guaranteed to see UNLOADING - EH context belongs
-	 * to us.  Disable all existing devices.
+	 * to us.  Restore SControl and disable all existing devices.
 	 */
-	ata_port_for_each_link(link, ap) {
+	__ata_port_for_each_link(link, ap) {
+		sata_scr_write(link, SCR_CONTROL, link->saved_scontrol);
 		ata_link_for_each_dev(dev, link)
 			ata_dev_disable(dev);
 	}
@@ -5991,6 +6002,9 @@ static int __init ata_parse_force_one(char **cur,
 		{ "udma133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma/133",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 6) },
 		{ "udma7",	.xfer_mask	= 1 << (ATA_SHIFT_UDMA + 7) },
+		{ "nohrst",	.lflags		= ATA_LFLAG_NO_HRST },
+		{ "nosrst",	.lflags		= ATA_LFLAG_NO_SRST },
+		{ "norst",	.lflags		= ATA_LFLAG_NO_HRST | ATA_LFLAG_NO_SRST },
 	};
 	char *start = *cur, *p = *cur;
 	char *id, *val, *endp;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 58bdc53..c1db2f2 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2040,7 +2040,7 @@ static void ata_eh_link_report(struct ata_link *link)
 	}
 
 	if (ehc->i.serror)
-		ata_port_printk(ap, KERN_ERR,
+		ata_link_printk(link, KERN_ERR,
 		  "SError: { %s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
 		  ehc->i.serror & SERR_DATA_RECOVERED ? "RecovData " : "",
 		  ehc->i.serror & SERR_COMM_RECOVERED ? "RecovComm " : "",
@@ -2171,18 +2171,12 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 }
 
 static int ata_eh_followup_srst_needed(struct ata_link *link,
-				       int rc, int classify,
-				       const unsigned int *classes)
+				       int rc, const unsigned int *classes)
 {
 	if ((link->flags & ATA_LFLAG_NO_SRST) || ata_link_offline(link))
 		return 0;
-	if (rc == -EAGAIN) {
-		if (classify)
-			return 1;
-		rc = 0;
-	}
-	if (rc != 0)
-		return 0;
+	if (rc == -EAGAIN)
+		return 1;
 	if (sata_pmp_supported(link->ap) && ata_is_host_link(link))
 		return 1;
 	return 0;
@@ -2210,6 +2204,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	 */
 	while (ata_eh_reset_timeouts[max_tries] != ULONG_MAX)
 		max_tries++;
+	if (link->flags & ATA_LFLAG_NO_HRST)
+		hardreset = NULL;
+	if (link->flags & ATA_LFLAG_NO_SRST)
+		softreset = NULL;
 
 	now = jiffies;
 	deadline = ata_deadline(ehc->last_reset, ATA_EH_RESET_COOL_DOWN);
@@ -2247,10 +2245,10 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	ehc->i.action &= ~ATA_EH_RESET;
 	if (hardreset) {
 		reset = hardreset;
-		ehc->i.action = ATA_EH_HARDRESET;
+		ehc->i.action |= ATA_EH_HARDRESET;
 	} else if (softreset) {
 		reset = softreset;
-		ehc->i.action = ATA_EH_SOFTRESET;
+		ehc->i.action |= ATA_EH_SOFTRESET;
 	}
 
 	if (prereset) {
@@ -2305,9 +2303,11 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ehc->i.flags |= ATA_EHI_DID_SOFTRESET;
 
 		rc = ata_do_reset(link, reset, classes, deadline);
+		if (rc && rc != -EAGAIN)
+			goto fail;
 
 		if (reset == hardreset &&
-		    ata_eh_followup_srst_needed(link, rc, classify, classes)) {
+		    ata_eh_followup_srst_needed(link, rc, classes)) {
 			/* okay, let's do follow-up softreset */
 			reset = softreset;
 
@@ -2322,10 +2322,6 @@ int ata_eh_reset(struct ata_link *link, int classify,
 			ata_eh_about_to_do(link, NULL, ATA_EH_RESET);
 			rc = ata_do_reset(link, reset, classes, deadline);
 		}
-
-		/* -EAGAIN can happen if we skipped followup SRST */
-		if (rc && rc != -EAGAIN)
-			goto fail;
 	} else {
 		if (verbose)
 			ata_link_printk(link, KERN_INFO, "no reset method "
diff --git a/drivers/ata/pata_acpi.c b/drivers/ata/pata_acpi.c
index fbe6057..eb919c1 100644
--- a/drivers/ata/pata_acpi.c
+++ b/drivers/ata/pata_acpi.c
@@ -181,7 +181,7 @@ static unsigned int pacpi_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != acpi->last) {
 		pacpi_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			pacpi_set_dmamode(ap, adev);
 		acpi->last = adev;
 	}
diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c
index d7de7ba..e8a0d99 100644
--- a/drivers/ata/pata_atiixp.c
+++ b/drivers/ata/pata_atiixp.c
@@ -183,7 +183,7 @@ static void atiixp_bmdma_start(struct ata_queued_cmd *qc)
 	u16 tmp16;
 
 	pci_read_config_word(pdev, ATIIXP_IDE_UDMA_CONTROL, &tmp16);
-	if (adev->dma_mode >= XFER_UDMA_0)
+	if (ata_using_udma(adev))
 		tmp16 |= (1 << dn);
 	else
 		tmp16 &= ~(1 << dn);
diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c
index 744beeb..0c4b271 100644
--- a/drivers/ata/pata_cs5530.c
+++ b/drivers/ata/pata_cs5530.c
@@ -149,10 +149,10 @@ static unsigned int cs5530_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	cs5530_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index 27843c7..0221c9a 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -606,7 +606,7 @@ static void it821x_display_disk(int n, u8 *buf)
 {
 	unsigned char id[41];
 	int mode = 0;
-	char *mtype;
+	char *mtype = "";
 	char mbuf[8];
 	char *cbl = "(40 wire cable)";
 
diff --git a/drivers/ata/pata_oldpiix.c b/drivers/ata/pata_oldpiix.c
index e678af3..df64f24 100644
--- a/drivers/ata/pata_oldpiix.c
+++ b/drivers/ata/pata_oldpiix.c
@@ -198,7 +198,7 @@ static unsigned int oldpiix_qc_issue(struct ata_queued_cmd *qc)
 
 	if (adev != ap->private_data) {
 		oldpiix_set_piomode(ap, adev);
-		if (adev->dma_mode)
+		if (ata_dma_enabled(adev))
 			oldpiix_set_dmamode(ap, adev);
 	}
 	return ata_sff_qc_issue(qc);
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index cbab397..0278fd2 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -167,10 +167,10 @@ static unsigned int sc1200_qc_issue(struct ata_queued_cmd *qc)
 	struct ata_device *prev = ap->private_data;
 
 	/* See if the DMA settings could be wrong */
-	if (adev->dma_mode != 0 && adev != prev && prev != NULL) {
+	if (ata_dma_enabled(adev) && adev != prev && prev != NULL) {
 		/* Maybe, but do the channels match MWDMA/UDMA ? */
-		if ((adev->dma_mode >= XFER_UDMA_0 && prev->dma_mode < XFER_UDMA_0) ||
-		    (adev->dma_mode < XFER_UDMA_0 && prev->dma_mode >= XFER_UDMA_0))
+		if ((ata_using_udma(adev) && !ata_using_udma(prev)) ||
+		    (ata_using_udma(prev) && !ata_using_udma(adev)))
 		    	/* Switch the mode bits */
 		    	sc1200_set_dmamode(ap, adev);
 	}
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 57d951b..8fdb2ce 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -324,62 +324,26 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 }
 
 /**
- *	via_ata_sff_tf_load - send taskfile registers to host controller
+ *	via_tf_load - send taskfile registers to host controller
  *	@ap: Port to which output is sent
  *	@tf: ATA taskfile register set
  *
  *	Outputs ATA taskfile to standard ATA host controller.
  *
  *	Note: This is to fix the internal bug of via chipsets, which
- *  will reset the device register after changing the IEN bit on
- *  ctl register
+ *	will reset the device register after changing the IEN bit on
+ *	ctl register
  */
-static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+static void via_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
 {
-	struct ata_ioports *ioaddr = &ap->ioaddr;
-	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
-	if (tf->ctl != ap->last_ctl) {
-		iowrite8(tf->ctl, ioaddr->ctl_addr);
-		iowrite8(tf->device, ioaddr->device_addr);
-		ap->last_ctl = tf->ctl;
-		ata_wait_idle(ap);
-	}
-
-	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
-		iowrite8(tf->hob_feature, ioaddr->feature_addr);
-		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
-		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
-		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
-		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
-		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
-			tf->hob_feature,
-			tf->hob_nsect,
-			tf->hob_lbal,
-			tf->hob_lbam,
-			tf->hob_lbah);
-	}
+	struct ata_taskfile tmp_tf;
 
-	if (is_addr) {
-		iowrite8(tf->feature, ioaddr->feature_addr);
-		iowrite8(tf->nsect, ioaddr->nsect_addr);
-		iowrite8(tf->lbal, ioaddr->lbal_addr);
-		iowrite8(tf->lbam, ioaddr->lbam_addr);
-		iowrite8(tf->lbah, ioaddr->lbah_addr);
-		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
-			tf->feature,
-			tf->nsect,
-			tf->lbal,
-			tf->lbam,
-			tf->lbah);
+	if (ap->ctl != ap->last_ctl && !(tf->flags & ATA_TFLAG_DEVICE)) {
+		tmp_tf = *tf;
+		tmp_tf.flags |= ATA_TFLAG_DEVICE;
+		tf = &tmp_tf;
 	}
-
-	if (tf->flags & ATA_TFLAG_DEVICE) {
-		iowrite8(tf->device, ioaddr->device_addr);
-		VPRINTK("device 0x%X\n", tf->device);
-	}
-
-	ata_wait_idle(ap);
+	ata_sff_tf_load(ap, tf);
 }
 
 static struct scsi_host_template via_sht = {
@@ -392,13 +356,12 @@ static struct ata_port_operations via_port_ops = {
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
-	.sff_tf_load = via_ata_tf_load,
+	.sff_tf_load	= via_tf_load,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
 	.inherits	= &via_port_ops,
 	.sff_data_xfer	= ata_sff_data_xfer_noirq,
-	.sff_tf_load = via_ata_tf_load,
 };
 
 /**
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index ad169ff..13c1d2a 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -1134,30 +1134,16 @@ static int mv_qc_defer(struct ata_queued_cmd *qc)
 	if (ap->nr_active_links == 0)
 		return 0;
 
-	if (pp->pp_flags & MV_PP_FLAG_EDMA_EN) {
-		/*
-		 * The port is operating in host queuing mode (EDMA).
-		 * It can accomodate a new qc if the qc protocol
-		 * is compatible with the current host queue mode.
-		 */
-		if (pp->pp_flags & MV_PP_FLAG_NCQ_EN) {
-			/*
-			 * The host queue (EDMA) is in NCQ mode.
-			 * If the new qc is also an NCQ command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_NCQ)
-				return 0;
-		} else {
-			/*
-			 * The host queue (EDMA) is in non-NCQ, DMA mode.
-			 * If the new qc is also a non-NCQ, DMA command,
-			 * then allow the new qc.
-			 */
-			if (qc->tf.protocol == ATA_PROT_DMA)
-				return 0;
-		}
-	}
+	/*
+	 * The port is operating in host queuing mode (EDMA) with NCQ
+	 * enabled, allow multiple NCQ commands.  EDMA also allows
+	 * queueing multiple DMA commands but libata core currently
+	 * doesn't allow it.
+	 */
+	if ((pp->pp_flags & MV_PP_FLAG_EDMA_EN) &&
+	    (pp->pp_flags & MV_PP_FLAG_NCQ_EN) && ata_is_ncq(qc->tf.protocol))
+		return 0;
+
 	return ATA_DEFER_PORT;
 }
 
@@ -3036,7 +3022,8 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
 		break;
 	case chip_soc:
 		hpriv->ops = &mv_soc_ops;
-		hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0;
+		hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
+			MV_HP_ERRATA_60X1C0;
 		break;
 
 	default:
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 06b8033..225bfc5 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -163,6 +163,7 @@ enum {
 	ATA_DEV_NONE		= 9,	/* no device */
 
 	/* struct ata_link flags */
+	ATA_LFLAG_NO_HRST	= (1 << 1), /* avoid hardreset */
 	ATA_LFLAG_NO_SRST	= (1 << 2), /* avoid softreset */
 	ATA_LFLAG_ASSUME_ATA	= (1 << 3), /* assume ATA class */
 	ATA_LFLAG_ASSUME_SEMB	= (1 << 4), /* assume SEMB class */
@@ -646,6 +647,7 @@ struct ata_link {
 
 	unsigned int		flags;		/* ATA_LFLAG_xxx */
 
+	u32			saved_scontrol;	/* SControl on probe */
 	unsigned int		hw_sata_spd_limit;
 	unsigned int		sata_spd_limit;
 	unsigned int		sata_spd;	/* current SATA PHY speed */
@@ -1427,6 +1429,28 @@ static inline unsigned long ata_deadline(unsigned long from_jiffies,
 	return from_jiffies + msecs_to_jiffies(timeout_msecs);
 }
 
+/* Don't open code these in drivers as there are traps. Firstly the range may
+   change in future hardware and specs, secondly 0xFF means 'no DMA' but is
+   > UDMA_0. Dyma ddreigiau */
+
+static inline int ata_using_mwdma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_MW_DMA_0 && adev->dma_mode <= XFER_MW_DMA_4)
+		return 1;
+	return 0;
+}
+
+static inline int ata_using_udma(struct ata_device *adev)
+{
+	if (adev->dma_mode >= XFER_UDMA_0 && adev->dma_mode <= XFER_UDMA_7)
+		return 1;
+	return 0;
+}
+
+static inline int ata_dma_enabled(struct ata_device *adev)
+{
+	return (adev->dma_mode == 0xFF ? 0 : 1);
+}
 
 /**************************************************************************
  * PMP - drivers/ata/libata-pmp.c

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2008-07-31  6:51 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2008-07-31  6:51 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/ata_piix.c    |    1 +
 drivers/ata/libata-core.c |   57 ++++++++--
 drivers/ata/libata-scsi.c |   34 +------
 drivers/ata/libata.h      |    1 -
 drivers/ata/pata_ali.c    |    3 +-
 drivers/ata/pata_it821x.c |  270 +++++++++++++++++++++++++++++++++++++++------
 drivers/ata/pata_via.c    |   64 +++++++++++-
 include/linux/libata.h    |    9 +-
 8 files changed, 356 insertions(+), 83 deletions(-)

Alan Cox (1):
      pata_it821x: Driver updates and reworking

Alexander Beregalov (1):
      libata.h: replace __FUNCTION__ with __func__

Ben Dooks (1):
      pata_ali: misplaced pci_dev_put()

Elias Oltmanns (1):
      libata-core: make sure that ata_force_tbl is freed in case of an error

JosephChan@via.com.tw (1):
      pata_via: add VX800 flag; add function for fixing h/w bugs

Tejun Heo (2):
      libata: update atapi disable handling
      ata_piix: subsys 106b:00a3 is apple ich8m too

diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index a90ae03..c294121 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -250,6 +250,7 @@ static const struct pci_device_id piix_pci_tbl[] = {
 	/* Mobile SATA Controller IDE (ICH8M), Apple */
 	{ 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata },
 	{ 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata },
+	{ 0x8086, 0x2828, 0x106b, 0x00a3, 0, 0, ich8m_apple_sata },
 	/* Mobile SATA Controller IDE (ICH8M) */
 	{ 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata },
 	/* SATA Controller IDE (ICH9) */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 9bef1a8..5ba96c5 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -120,7 +120,7 @@ static char ata_force_param_buf[PAGE_SIZE] __initdata;
 module_param_string(force, ata_force_param_buf, sizeof(ata_force_param_buf), 0);
 MODULE_PARM_DESC(force, "Force ATA configurations including cable type, link speed and transfer mode (see Documentation/kernel-parameters.txt for details)");
 
-int atapi_enabled = 1;
+static int atapi_enabled = 1;
 module_param(atapi_enabled, int, 0444);
 MODULE_PARM_DESC(atapi_enabled, "Enable discovery of ATAPI devices (0=off, 1=on)");
 
@@ -1132,6 +1132,8 @@ void ata_id_string(const u16 *id, unsigned char *s,
 {
 	unsigned int c;
 
+	BUG_ON(len & 1);
+
 	while (len > 0) {
 		c = id[ofs] >> 8;
 		*s = c;
@@ -1165,8 +1167,6 @@ void ata_id_c_string(const u16 *id, unsigned char *s,
 {
 	unsigned char *p;
 
-	WARN_ON(!(len & 1));
-
 	ata_id_string(id, s, ofs, len - 1);
 
 	p = s + strnlen(s, len - 1);
@@ -1886,6 +1886,23 @@ static u32 ata_pio_mask_no_iordy(const struct ata_device *adev)
 }
 
 /**
+ *	ata_do_dev_read_id		-	default ID read method
+ *	@dev: device
+ *	@tf: proposed taskfile
+ *	@id: data buffer
+ *
+ *	Issue the identify taskfile and hand back the buffer containing
+ *	identify data. For some RAID controllers and for pre ATA devices
+ *	this function is wrapped or replaced by the driver
+ */
+unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id)
+{
+	return ata_exec_internal(dev, tf, NULL, DMA_FROM_DEVICE,
+				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+}
+
+/**
  *	ata_dev_read_id - Read ID data from the specified device
  *	@dev: target device
  *	@p_class: pointer to class of the target device (may be changed)
@@ -1920,7 +1937,7 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	if (ata_msg_ctl(ap))
 		ata_dev_printk(dev, KERN_DEBUG, "%s: ENTER\n", __func__);
 
- retry:
+retry:
 	ata_tf_init(dev, &tf);
 
 	switch (class) {
@@ -1948,8 +1965,11 @@ int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
 	 */
 	tf.flags |= ATA_TFLAG_POLLING;
 
-	err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
-				     id, sizeof(id[0]) * ATA_ID_WORDS, 0);
+	if (ap->ops->read_id)
+		err_mask = ap->ops->read_id(dev, &tf, id);
+	else
+		err_mask = ata_do_dev_read_id(dev, &tf, id);
+
 	if (err_mask) {
 		if (err_mask & AC_ERR_NODEV_HINT) {
 			ata_dev_printk(dev, KERN_DEBUG,
@@ -2142,6 +2162,16 @@ int ata_dev_configure(struct ata_device *dev)
 		return 0;
 	}
 
+	if ((!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) &&
+	    dev->class == ATA_DEV_ATAPI) {
+		ata_dev_printk(dev, KERN_WARNING,
+			"WARNING: ATAPI is %s, device ignored.\n",
+			atapi_enabled ? "not supported with this driver"
+				      : "disabled");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -6088,16 +6118,20 @@ static int __init ata_init(void)
 
 	ata_wq = create_workqueue("ata");
 	if (!ata_wq)
-		return -ENOMEM;
+		goto free_force_tbl;
 
 	ata_aux_wq = create_singlethread_workqueue("ata_aux");
-	if (!ata_aux_wq) {
-		destroy_workqueue(ata_wq);
-		return -ENOMEM;
-	}
+	if (!ata_aux_wq)
+		goto free_wq;
 
 	printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
 	return 0;
+
+free_wq:
+	destroy_workqueue(ata_wq);
+free_force_tbl:
+	kfree(ata_force_tbl);
+	return -ENOMEM;
 }
 
 static void __exit ata_exit(void)
@@ -6269,6 +6303,7 @@ EXPORT_SYMBOL_GPL(ata_host_resume);
 #endif /* CONFIG_PM */
 EXPORT_SYMBOL_GPL(ata_id_string);
 EXPORT_SYMBOL_GPL(ata_id_c_string);
+EXPORT_SYMBOL_GPL(ata_do_dev_read_id);
 EXPORT_SYMBOL_GPL(ata_scsi_simulate);
 
 EXPORT_SYMBOL_GPL(ata_pio_need_iordy);
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index f3b4b15..b9d3ba4 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -2551,36 +2551,6 @@ static struct ata_device *__ata_scsi_find_dev(struct ata_port *ap,
 }
 
 /**
- *	ata_scsi_dev_enabled - determine if device is enabled
- *	@dev: ATA device
- *
- *	Determine if commands should be sent to the specified device.
- *
- *	LOCKING:
- *	spin_lock_irqsave(host lock)
- *
- *	RETURNS:
- *	0 if commands are not allowed / 1 if commands are allowed
- */
-
-static int ata_scsi_dev_enabled(struct ata_device *dev)
-{
-	if (unlikely(!ata_dev_enabled(dev)))
-		return 0;
-
-	if (!atapi_enabled || (dev->link->ap->flags & ATA_FLAG_NO_ATAPI)) {
-		if (unlikely(dev->class == ATA_DEV_ATAPI)) {
-			ata_dev_printk(dev, KERN_WARNING,
-				       "WARNING: ATAPI is %s, device ignored.\n",
-				       atapi_enabled ? "not supported with this driver" : "disabled");
-			return 0;
-		}
-	}
-
-	return 1;
-}
-
-/**
  *	ata_scsi_find_dev - lookup ata_device from scsi_cmnd
  *	@ap: ATA port to which the device is attached
  *	@scsidev: SCSI device from which we derive the ATA device
@@ -2601,7 +2571,7 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
 {
 	struct ata_device *dev = __ata_scsi_find_dev(ap, scsidev);
 
-	if (unlikely(!dev || !ata_scsi_dev_enabled(dev)))
+	if (unlikely(!dev || !ata_dev_enabled(dev)))
 		return NULL;
 
 	return dev;
@@ -3622,7 +3592,7 @@ int ata_sas_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
 
 	ata_scsi_dump_cdb(ap, cmd);
 
-	if (likely(ata_scsi_dev_enabled(ap->link.device)))
+	if (likely(ata_dev_enabled(ap->link.device)))
 		rc = __ata_scsi_queuecmd(cmd, done, ap->link.device);
 	else {
 		cmd->result = (DID_BAD_TARGET << 16);
diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h
index f6f9c28..ade5c75 100644
--- a/drivers/ata/libata.h
+++ b/drivers/ata/libata.h
@@ -66,7 +66,6 @@ enum {
 
 extern unsigned int ata_print_id;
 extern struct workqueue_struct *ata_aux_wq;
-extern int atapi_enabled;
 extern int atapi_passthru16;
 extern int libata_fua;
 extern int libata_noacpi;
diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 0f3e659..5ca70fa 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -550,8 +550,9 @@ static int ali_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		pci_read_config_byte(isa_bridge, 0x5E, &tmp);
 		if ((tmp & 0x1E) == 0x12)
 	        	ppi[0] = &info_20_udma;
-		pci_dev_put(isa_bridge);
 	}
+	pci_dev_put(isa_bridge);
+
 	return ata_pci_sff_init_one(pdev, ppi, &ali_sht, NULL);
 }
 
diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c
index e108169..27843c7 100644
--- a/drivers/ata/pata_it821x.c
+++ b/drivers/ata/pata_it821x.c
@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.8"
+#define DRV_VERSION "0.4.0"
 
 struct it821x_dev
 {
@@ -425,6 +425,8 @@ static unsigned int it821x_smart_qc_issue(struct ata_queued_cmd *qc)
 		case ATA_CMD_WRITE_MULTI:
 		case ATA_CMD_WRITE_MULTI_EXT:
 		case ATA_CMD_ID_ATA:
+		case ATA_CMD_INIT_DEV_PARAMS:
+		case 0xFC:	/* Internal 'report rebuild state' */
 		/* Arguably should just no-op this one */
 		case ATA_CMD_SET_FEATURES:
 			return ata_sff_qc_issue(qc);
@@ -509,7 +511,7 @@ static void it821x_dev_config(struct ata_device *adev)
 
 	if (strstr(model_num, "Integrated Technology Express")) {
 		/* RAID mode */
-		printk(KERN_INFO "IT821x %sRAID%d volume",
+		ata_dev_printk(adev, KERN_INFO, "%sRAID%d volume",
 			adev->id[147]?"Bootable ":"",
 			adev->id[129]);
 		if (adev->id[129] != 1)
@@ -519,37 +521,51 @@ static void it821x_dev_config(struct ata_device *adev)
 	/* This is a controller firmware triggered funny, don't
 	   report the drive faulty! */
 	adev->horkage &= ~ATA_HORKAGE_DIAGNOSTIC;
+	/* No HPA in 'smart' mode */
+	adev->horkage |= ATA_HORKAGE_BROKEN_HPA;
 }
 
 /**
- *	it821x_ident_hack	-	Hack identify data up
- *	@ap: Port
+ *	it821x_read_id	-	Hack identify data up
+ *	@adev: device to read
+ *	@tf: proposed taskfile
+ *	@id: buffer for returned ident data
  *
- *	Walk the devices on this firmware driven port and slightly
+ *	Query the devices on this firmware driven port and slightly
  *	mash the identify data to stop us and common tools trying to
  *	use features not firmware supported. The firmware itself does
  *	some masking (eg SMART) but not enough.
- *
- *	This is a bit of an abuse of the cable method, but it is the
- *	only method called at the right time. We could modify the libata
- *	core specifically for ident hacking but while we have one offender
- *	it seems better to keep the fallout localised.
  */
 
-static int it821x_ident_hack(struct ata_port *ap)
+static unsigned int it821x_read_id(struct ata_device *adev,
+					struct ata_taskfile *tf, u16 *id)
 {
-	struct ata_device *adev;
-	ata_link_for_each_dev(adev, &ap->link) {
-		if (ata_dev_enabled(adev)) {
-			adev->id[84] &= ~(1 << 6);	/* No FUA */
-			adev->id[85] &= ~(1 << 10);	/* No HPA */
-			adev->id[76] = 0;		/* No NCQ/AN etc */
-		}
+	unsigned int err_mask;
+	unsigned char model_num[ATA_ID_PROD_LEN + 1];
+
+	err_mask = ata_do_dev_read_id(adev, tf, id);
+	if (err_mask)
+		return err_mask;
+	ata_id_c_string(id, model_num, ATA_ID_PROD, sizeof(model_num));
+
+	id[83] &= ~(1 << 12);	/* Cache flush is firmware handled */
+	id[83] &= ~(1 << 13);	/* Ditto for LBA48 flushes */
+	id[84] &= ~(1 << 6);	/* No FUA */
+	id[85] &= ~(1 << 10);	/* No HPA */
+	id[76] = 0;		/* No NCQ/AN etc */
+
+	if (strstr(model_num, "Integrated Technology Express")) {
+		/* Set feature bits the firmware neglects */
+		id[49] |= 0x0300;	/* LBA, DMA */
+		id[82] |= 0x0400;	/* LBA48 */
+		id[83] &= 0x7FFF;
+		id[83] |= 0x4000;	/* Word 83 is valid */
+		id[86] |= 0x0400;	/* LBA48 on */
+		id[ATA_ID_MAJOR_VER] |= 0x1F;
 	}
-	return ata_cable_unknown(ap);
+	return err_mask;
 }
 
-
 /**
  *	it821x_check_atapi_dma	-	ATAPI DMA handler
  *	@qc: Command we are about to issue
@@ -577,6 +593,136 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc)
 	return 0;
 }
 
+/**
+ *	it821x_display_disk	-	display disk setup
+ *	@n: Device number
+ *	@buf: Buffer block from firmware
+ *
+ *	Produce a nice informative display of the device setup as provided
+ *	by the firmware.
+ */
+
+static void it821x_display_disk(int n, u8 *buf)
+{
+	unsigned char id[41];
+	int mode = 0;
+	char *mtype;
+	char mbuf[8];
+	char *cbl = "(40 wire cable)";
+
+	static const char *types[5] = {
+		"RAID0", "RAID1" "RAID 0+1", "JBOD", "DISK"
+	};
+
+	if (buf[52] > 4)	/* No Disk */
+		return;
+
+	ata_id_c_string((u16 *)buf, id, 0, 41); 
+
+	if (buf[51]) {
+		mode = ffs(buf[51]);
+		mtype = "UDMA";
+	} else if (buf[49]) {
+		mode = ffs(buf[49]);
+		mtype = "MWDMA";
+	}
+
+	if (buf[76])
+		cbl = "";
+
+	if (mode)
+		snprintf(mbuf, 8, "%5s%d", mtype, mode - 1);
+	else
+		strcpy(mbuf, "PIO");
+	if (buf[52] == 4)
+		printk(KERN_INFO "%d: %-6s %-8s          %s %s\n",
+				n, mbuf, types[buf[52]], id, cbl);
+	else
+		printk(KERN_INFO "%d: %-6s %-8s Volume: %1d %s %s\n",
+				n, mbuf, types[buf[52]], buf[53], id, cbl);
+	if (buf[125] < 100)
+		printk(KERN_INFO "%d: Rebuilding: %d%%\n", n, buf[125]);
+}
+
+/**
+ *	it821x_firmware_command		-	issue firmware command
+ *	@ap: IT821x port to interrogate
+ *	@cmd: command
+ *	@len: length
+ *
+ *	Issue firmware commands expecting data back from the controller. We
+ *	use this to issue commands that do not go via the normal paths. Other
+ *	commands such as 0xFC can be issued normally.
+ */
+
+static u8 *it821x_firmware_command(struct ata_port *ap, u8 cmd, int len)
+{
+	u8 status;
+	int n = 0;
+	u16 *buf = kmalloc(len, GFP_KERNEL);
+	if (buf == NULL) {
+		printk(KERN_ERR "it821x_firmware_command: Out of memory\n");
+		return NULL;
+	}
+	/* This isn't quite a normal ATA command as we are talking to the
+	   firmware not the drives */
+	ap->ctl |= ATA_NIEN;
+	iowrite8(ap->ctl, ap->ioaddr.ctl_addr);
+	ata_wait_idle(ap);
+	iowrite8(ATA_DEVICE_OBS, ap->ioaddr.device_addr);
+	iowrite8(cmd, ap->ioaddr.command_addr);
+	udelay(1);
+	/* This should be almost immediate but a little paranoia goes a long
+	   way. */
+	while(n++ < 10) {
+		status = ioread8(ap->ioaddr.status_addr);
+		if (status & ATA_ERR) {
+			kfree(buf);
+			printk(KERN_ERR "it821x_firmware_command: rejected\n");
+			return NULL;
+		}
+		if (status & ATA_DRQ) {
+			ioread16_rep(ap->ioaddr.data_addr, buf, len/2);
+			return (u8 *)buf;
+		}
+		mdelay(1);
+	}
+	kfree(buf);
+	printk(KERN_ERR "it821x_firmware_command: timeout\n");
+	return NULL;
+}
+
+/**
+ *	it821x_probe_firmware	-	firmware reporting/setup
+ *	@ap: IT821x port being probed
+ *
+ *	Probe the firmware of the controller by issuing firmware command
+ *	0xFA and analysing the returned data.
+ */
+
+static void it821x_probe_firmware(struct ata_port *ap)
+{
+	u8 *buf;
+	int i;
+
+	/* This is a bit ugly as we can't just issue a task file to a device
+	   as this is controller magic */
+
+	buf = it821x_firmware_command(ap, 0xFA, 512);
+
+	if (buf != NULL) {
+		printk(KERN_INFO "pata_it821x: Firmware %02X/%02X/%02X%02X\n",
+				buf[505],
+				buf[506],
+				buf[507],
+				buf[508]);
+		for (i = 0; i < 4; i++)
+ 			it821x_display_disk(i, buf + 128 * i);
+		kfree(buf);
+	}
+}
+
+
 
 /**
  *	it821x_port_start	-	port setup
@@ -610,6 +756,8 @@ static int it821x_port_start(struct ata_port *ap)
 		/* Long I/O's although allowed in LBA48 space cause the
 		   onboard firmware to enter the twighlight zone */
 		/* No ATAPI DMA in this mode either */
+		if (ap->port_no == 0)
+			it821x_probe_firmware(ap);
 	}
 	/* Pull the current clocks from 0x50 */
 	if (conf & (1 << (1 + ap->port_no)))
@@ -631,6 +779,25 @@ static int it821x_port_start(struct ata_port *ap)
 	return 0;
 }
 
+/**
+ *	it821x_rdc_cable	-	Cable detect for RDC1010
+ *	@ap: port we are checking
+ *
+ *	Return the RDC1010 cable type. Unlike the IT821x we know how to do
+ *	this and can do host side cable detect
+ */
+
+static int it821x_rdc_cable(struct ata_port *ap)
+{
+	u16 r40;
+	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
+
+	pci_read_config_word(pdev, 0x40, &r40);
+	if (r40 & (1 << (2 + ap->port_no)))
+		return ATA_CBL_PATA40;
+	return ATA_CBL_PATA80;
+}
+
 static struct scsi_host_template it821x_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -641,9 +808,10 @@ static struct ata_port_operations it821x_smart_port_ops = {
 	.check_atapi_dma= it821x_check_atapi_dma,
 	.qc_issue	= it821x_smart_qc_issue,
 
-	.cable_detect	= it821x_ident_hack,
+	.cable_detect	= ata_cable_80wire,
 	.set_mode	= it821x_smart_set_mode,
 	.dev_config	= it821x_dev_config,
+	.read_id	= it821x_read_id,
 
 	.port_start	= it821x_port_start,
 };
@@ -664,8 +832,29 @@ static struct ata_port_operations it821x_passthru_port_ops = {
 	.port_start	= it821x_port_start,
 };
 
+static struct ata_port_operations it821x_rdc_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+
+	.check_atapi_dma= it821x_check_atapi_dma,
+	.sff_dev_select	= it821x_passthru_dev_select,
+	.bmdma_start 	= it821x_passthru_bmdma_start,
+	.bmdma_stop	= it821x_passthru_bmdma_stop,
+	.qc_issue	= it821x_passthru_qc_issue,
+
+	.cable_detect	= it821x_rdc_cable,
+	.set_piomode	= it821x_passthru_set_piomode,
+	.set_dmamode	= it821x_passthru_set_dmamode,
+
+	.port_start	= it821x_port_start,
+};
+
 static void it821x_disable_raid(struct pci_dev *pdev)
 {
+	/* Neither the RDC nor the IT8211 */
+	if (pdev->vendor != PCI_VENDOR_ID_ITE ||
+			pdev->device != PCI_DEVICE_ID_ITE_8212)
+			return;
+
 	/* Reset local CPU, and set BIOS not ready */
 	pci_write_config_byte(pdev, 0x5E, 0x01);
 
@@ -690,6 +879,7 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.flags = ATA_FLAG_SLAVE_POSS,
 		.pio_mask = 0x1f,
 		.mwdma_mask = 0x07,
+		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_smart_port_ops
 	};
 	static const struct ata_port_info info_passthru = {
@@ -699,6 +889,13 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		.udma_mask = ATA_UDMA6,
 		.port_ops = &it821x_passthru_port_ops
 	};
+	static const struct ata_port_info info_rdc = {
+		.flags = ATA_FLAG_SLAVE_POSS,
+		.pio_mask = 0x1f,
+		.mwdma_mask = 0x07,
+		/* No UDMA */
+		.port_ops = &it821x_rdc_port_ops
+	};
 
 	const struct ata_port_info *ppi[] = { NULL, NULL };
 	static char *mode[2] = { "pass through", "smart" };
@@ -707,21 +904,25 @@ static int it821x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	rc = pcim_enable_device(pdev);
 	if (rc)
 		return rc;
+		
+	if (pdev->vendor == PCI_VENDOR_ID_RDC) {
+		ppi[0] = &info_rdc;
+	} else {
+		/* Force the card into bypass mode if so requested */
+		if (it8212_noraid) {
+			printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
+			it821x_disable_raid(pdev);
+		}
+		pci_read_config_byte(pdev, 0x50, &conf);
+		conf &= 1;
 
-	/* Force the card into bypass mode if so requested */
-	if (it8212_noraid) {
-		printk(KERN_INFO DRV_NAME ": forcing bypass mode.\n");
-		it821x_disable_raid(pdev);
+		printk(KERN_INFO DRV_NAME": controller in %s mode.\n",
+								mode[conf]);
+		if (conf == 0)
+			ppi[0] = &info_passthru;
+		else
+			ppi[0] = &info_smart;
 	}
-	pci_read_config_byte(pdev, 0x50, &conf);
-	conf &= 1;
-
-	printk(KERN_INFO DRV_NAME ": controller in %s mode.\n", mode[conf]);
-	if (conf == 0)
-		ppi[0] = &info_passthru;
-	else
-		ppi[0] = &info_smart;
-
 	return ata_pci_sff_init_one(pdev, ppi, &it821x_sht, NULL);
 }
 
@@ -745,6 +946,7 @@ static int it821x_reinit_one(struct pci_dev *pdev)
 static const struct pci_device_id it821x[] = {
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), },
 	{ PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), },
+	{ PCI_VDEVICE(RDC, 0x1010), },
 
 	{ },
 };
diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c
index 708ed14..57d951b 100644
--- a/drivers/ata/pata_via.c
+++ b/drivers/ata/pata_via.c
@@ -98,7 +98,8 @@ static const struct via_isa_bridge {
 	u8 rev_max;
 	u16 flags;
 } via_isa_bridges[] = {
-	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+	{ "vx800",	PCI_DEVICE_ID_VIA_VX800,    0x00, 0x2f, VIA_UDMA_133 |
+	VIA_BAD_AST | VIA_SATA_PATA },
 	{ "vt8237s",	PCI_DEVICE_ID_VIA_8237S,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "vt8251",	PCI_DEVICE_ID_VIA_8251,     0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
 	{ "cx700",	PCI_DEVICE_ID_VIA_CX700,    0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA },
@@ -322,6 +323,65 @@ static void via_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 	via_do_set_mode(ap, adev, adev->dma_mode, tclock[mode], set_ast, udma[mode]);
 }
 
+/**
+ *	via_ata_sff_tf_load - send taskfile registers to host controller
+ *	@ap: Port to which output is sent
+ *	@tf: ATA taskfile register set
+ *
+ *	Outputs ATA taskfile to standard ATA host controller.
+ *
+ *	Note: This is to fix the internal bug of via chipsets, which
+ *  will reset the device register after changing the IEN bit on
+ *  ctl register
+ */
+static void via_ata_tf_load(struct ata_port *ap, const struct ata_taskfile *tf)
+{
+	struct ata_ioports *ioaddr = &ap->ioaddr;
+	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
+
+	if (tf->ctl != ap->last_ctl) {
+		iowrite8(tf->ctl, ioaddr->ctl_addr);
+		iowrite8(tf->device, ioaddr->device_addr);
+		ap->last_ctl = tf->ctl;
+		ata_wait_idle(ap);
+	}
+
+	if (is_addr && (tf->flags & ATA_TFLAG_LBA48)) {
+		iowrite8(tf->hob_feature, ioaddr->feature_addr);
+		iowrite8(tf->hob_nsect, ioaddr->nsect_addr);
+		iowrite8(tf->hob_lbal, ioaddr->lbal_addr);
+		iowrite8(tf->hob_lbam, ioaddr->lbam_addr);
+		iowrite8(tf->hob_lbah, ioaddr->lbah_addr);
+		VPRINTK("hob: feat 0x%X nsect 0x%X, lba 0x%X 0x%X 0x%X\n",
+			tf->hob_feature,
+			tf->hob_nsect,
+			tf->hob_lbal,
+			tf->hob_lbam,
+			tf->hob_lbah);
+	}
+
+	if (is_addr) {
+		iowrite8(tf->feature, ioaddr->feature_addr);
+		iowrite8(tf->nsect, ioaddr->nsect_addr);
+		iowrite8(tf->lbal, ioaddr->lbal_addr);
+		iowrite8(tf->lbam, ioaddr->lbam_addr);
+		iowrite8(tf->lbah, ioaddr->lbah_addr);
+		VPRINTK("feat 0x%X nsect 0x%X lba 0x%X 0x%X 0x%X\n",
+			tf->feature,
+			tf->nsect,
+			tf->lbal,
+			tf->lbam,
+			tf->lbah);
+	}
+
+	if (tf->flags & ATA_TFLAG_DEVICE) {
+		iowrite8(tf->device, ioaddr->device_addr);
+		VPRINTK("device 0x%X\n", tf->device);
+	}
+
+	ata_wait_idle(ap);
+}
+
 static struct scsi_host_template via_sht = {
 	ATA_BMDMA_SHT(DRV_NAME),
 };
@@ -332,11 +392,13 @@ static struct ata_port_operations via_port_ops = {
 	.set_piomode	= via_set_piomode,
 	.set_dmamode	= via_set_dmamode,
 	.prereset	= via_pre_reset,
+	.sff_tf_load = via_ata_tf_load,
 };
 
 static struct ata_port_operations via_port_ops_noirq = {
 	.inherits	= &via_port_ops,
 	.sff_data_xfer	= ata_sff_data_xfer_noirq,
+	.sff_tf_load = via_ata_tf_load,
 };
 
 /**
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 5b247b8..06b8033 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -60,9 +60,9 @@
 
 /* note: prints function name for you */
 #ifdef ATA_DEBUG
-#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define DPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #ifdef ATA_VERBOSE_DEBUG
-#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define VPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 #else
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_VERBOSE_DEBUG */
@@ -71,7 +71,7 @@
 #define VPRINTK(fmt, args...)
 #endif	/* ATA_DEBUG */
 
-#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __FUNCTION__, ## args)
+#define BPRINTK(fmt, args...) if (ap->flags & ATA_FLAG_DEBUGMSG) printk(KERN_ERR "%s: " fmt, __func__, ## args)
 
 /* NEW: debug levels */
 #define HAVE_LIBATA_MSG 1
@@ -750,6 +750,7 @@ struct ata_port_operations {
 	void (*set_piomode)(struct ata_port *ap, struct ata_device *dev);
 	void (*set_dmamode)(struct ata_port *ap, struct ata_device *dev);
 	int  (*set_mode)(struct ata_link *link, struct ata_device **r_failed_dev);
+	unsigned int (*read_id)(struct ata_device *dev, struct ata_taskfile *tf, u16 *id);
 
 	void (*dev_config)(struct ata_device *dev);
 
@@ -951,6 +952,8 @@ extern void ata_id_string(const u16 *id, unsigned char *s,
 			  unsigned int ofs, unsigned int len);
 extern void ata_id_c_string(const u16 *id, unsigned char *s,
 			    unsigned int ofs, unsigned int len);
+extern unsigned int ata_do_dev_read_id(struct ata_device *dev,
+					struct ata_taskfile *tf, u16 *id);
 extern void ata_qc_complete(struct ata_queued_cmd *qc);
 extern int ata_qc_complete_multiple(struct ata_port *ap, u32 qc_active);
 extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,

^ permalink raw reply	[flat|nested] 95+ messages in thread

* [git patches] libata updates
@ 2008-05-19 22:57 Jeff Garzik
  0 siblings, 0 replies; 95+ messages in thread
From: Jeff Garzik @ 2008-05-19 22:57 UTC (permalink / raw)
  To: Andrew Morton, Linus Torvalds; +Cc: linux-ide, LKML


sata_mv, sata_promise and PMP fixes

Please pull from 'upstream-linus' branch of
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev.git upstream-linus

to receive the following updates:

 drivers/ata/libata-acpi.c   |   75 ++++++++++------
 drivers/ata/libata-core.c   |   40 +++++----
 drivers/ata/libata-eh.c     |  207 +++++++++++++++++++++++-------------------
 drivers/ata/libata-pmp.c    |   44 +++++-----
 drivers/ata/libata-scsi.c   |    6 --
 drivers/ata/pata_ali.c      |   10 +-
 drivers/ata/pata_amd.c      |   14 ++--
 drivers/ata/pata_at32.c     |    2 -
 drivers/ata/pata_bf54x.c    |    5 +-
 drivers/ata/pata_cypress.c  |    8 +-
 drivers/ata/pata_legacy.c   |   50 +++++-----
 drivers/ata/pata_ns87410.c  |    6 +-
 drivers/ata/pata_ns87415.c  |    4 +-
 drivers/ata/pata_qdi.c      |   16 ++--
 drivers/ata/pata_sl82c105.c |    2 +-
 drivers/ata/pata_via.c      |   14 ++--
 drivers/ata/pata_winbond.c  |    6 +-
 drivers/ata/sata_mv.c       |  163 +++++++++++++++++++---------------
 drivers/ata/sata_promise.c  |  148 +++++++++++++++----------------
 drivers/ata/sata_sil24.c    |   11 +++
 include/linux/libata.h      |    6 +-
 21 files changed, 453 insertions(+), 384 deletions(-)

Christophe Jaillet (1):
      avr32/pata: avoid unnecessary memset (updated after comments)

Harvey Harrison (1):
      ata: remove FIT() macro

Jeff Garzik (1):
      drivers/ata: trim trailing whitespace

Mark Lord (10):
      sata_mv: always do softreset
      sata_mv: fis irq register fixes
      sata_mv: group genIIe flags
      sata_mv: async notify for genIIe only
      sata_mv: don't blindly enable IRQs
      sata_mv: consolidate main_irq_mask updates
      sata_mv: fix pmp drives not found
      sata_mv: disregard masked irqs
      sata_mv: cache main_irq_mask register in hpriv
      sata_mv: ensure empty request queue for FBS-NCQ EH

Matthew Garrett (1):
      Fixups to ATA ACPI hotplug

Mikael Pettersson (3):
      sata_promise: fix irq clearing buglets
      sata_promise: mmio access cleanups
      sata_promise: other cleanups

Sonic Zhang (1):
      pata-bf54x: Set ATAPI HSM to control IDE device terminate sequence.

Tejun Heo (10):
      libata: fix sata_link_hardreset() @online out parameter handling
      libata: reorganize ata_eh_reset() no reset method path
      libata: move reset freeze/thaw handling into ata_eh_reset()
      libata: kill hotplug related race condition
      libata: ignore recovered PHY errors
      libata: increase PMP register access timeout to 3s
      libata: make sure PMP notification is turned off during recovery
      libata: don't schedule LPM action seperately during probing
      sata_sil24: don't use NCQ if marvell 4140 PMP is attached
      libata: ignore SIMG4726 config pseudo device

diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c
index 70b77e0..dbf6ca7 100644
--- a/drivers/ata/libata-acpi.c
+++ b/drivers/ata/libata-acpi.c
@@ -118,8 +118,8 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap)
 		ap->pflags |= ATA_PFLAG_INIT_GTM_VALID;
 }
 
-static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
-				    u32 event)
+static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device
+				    *dev, u32 event)
 {
 	char event_string[12];
 	char *envp[] = { event_string, NULL };
@@ -127,6 +127,9 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 	struct kobject *kobj = NULL;
 	int wait = 0;
 	unsigned long flags;
+	acpi_handle handle, tmphandle;
+	unsigned long sta;
+	acpi_status status;
 
 	if (!ap)
 		ap = dev->link->ap;
@@ -134,32 +137,57 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 
 	spin_lock_irqsave(ap->lock, flags);
 
+	if (dev)
+		handle = dev->acpi_handle;
+	else
+		handle = ap->acpi_handle;
+
+	status = acpi_get_handle(handle, "_EJ0", &tmphandle);
+	if (ACPI_FAILURE(status)) {
+		/* This device is not ejectable */
+		spin_unlock_irqrestore(ap->lock, flags);
+		return;
+	}
+
+	status = acpi_evaluate_integer(handle, "_STA", NULL, &sta);
+	if (ACPI_FAILURE(status)) {
+		printk ("Unable to determine bay status\n");
+		spin_unlock_irqrestore(ap->lock, flags);
+		return;
+	}
+
 	switch (event) {
 	case ACPI_NOTIFY_BUS_CHECK:
 	case ACPI_NOTIFY_DEVICE_CHECK:
 		ata_ehi_push_desc(ehi, "ACPI event");
-		ata_ehi_hotplugged(ehi);
-		ata_port_freeze(ap);
-		break;
-
-	case ACPI_NOTIFY_EJECT_REQUEST:
-		ata_ehi_push_desc(ehi, "ACPI event");
-		if (dev)
-			dev->flags |= ATA_DFLAG_DETACH;
-		else {
-			struct ata_link *tlink;
-			struct ata_device *tdev;
-
-			ata_port_for_each_link(tlink, ap)
-				ata_link_for_each_dev(tdev, tlink)
-					tdev->flags |= ATA_DFLAG_DETACH;
+		if (!sta) {
+                /* Device has been unplugged */
+			if (dev)
+				dev->flags |= ATA_DFLAG_DETACH;
+			else {
+				struct ata_link *tlink;
+				struct ata_device *tdev;
+
+				ata_port_for_each_link(tlink, ap) {
+					ata_link_for_each_dev(tdev, tlink) {
+						tdev->flags |=
+							ATA_DFLAG_DETACH;
+					}
+				}
+			}
+			ata_port_schedule_eh(ap);
+			wait = 1;
+		} else {
+			ata_ehi_hotplugged(ehi);
+			ata_port_freeze(ap);
 		}
-
-		ata_port_schedule_eh(ap);
-		wait = 1;
-		break;
 	}
 
+	spin_unlock_irqrestore(ap->lock, flags);
+
+	if (wait)
+		ata_port_wait_eh(ap);
+
 	if (dev) {
 		if (dev->sdev)
 			kobj = &dev->sdev->sdev_gendev.kobj;
@@ -170,11 +198,6 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev,
 		sprintf(event_string, "BAY_EVENT=%d", event);
 		kobject_uevent_env(kobj, KOBJ_CHANGE, envp);
 	}
-
-	spin_unlock_irqrestore(ap->lock, flags);
-
-	if (wait)
-		ata_port_wait_eh(ap);
 }
 
 static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 927b692..3c89f20 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2126,6 +2126,13 @@ int ata_dev_configure(struct ata_device *dev)
 	dev->horkage |= ata_dev_blacklisted(dev);
 	ata_force_horkage(dev);
 
+	if (dev->horkage & ATA_HORKAGE_DISABLE) {
+		ata_dev_printk(dev, KERN_INFO,
+			       "unsupported device, disabling\n");
+		ata_dev_disable(dev);
+		return 0;
+	}
+
 	/* let ACPI work its magic */
 	rc = ata_acpi_on_devcfg(dev);
 	if (rc)
@@ -3490,22 +3497,11 @@ int sata_link_resume(struct ata_link *link, const unsigned long *params,
 	if ((rc = sata_link_debounce(link, params, deadline)))
 		return rc;
 
-	/* Clear SError.  PMP and some host PHYs require this to
-	 * operate and clearing should be done before checking PHY
-	 * online status to avoid race condition (hotplugging between
-	 * link resume and status check).
-	 */
+	/* clear SError, some PHYs require this even for SRST to work */
 	if (!(rc = sata_scr_read(link, SCR_ERROR, &serror)))
 		rc = sata_scr_write(link, SCR_ERROR, serror);
-	if (rc == 0 || rc == -EINVAL) {
-		unsigned long flags;
 
-		spin_lock_irqsave(link->ap->lock, flags);
-		link->eh_info.serror = 0;
-		spin_unlock_irqrestore(link->ap->lock, flags);
-		rc = 0;
-	}
-	return rc;
+	return rc != -EINVAL ? rc : 0;
 }
 
 /**
@@ -3653,9 +3649,13 @@ int sata_link_hardreset(struct ata_link *link, const unsigned long *timing,
 	if (check_ready)
 		rc = ata_wait_ready(link, deadline, check_ready);
  out:
-	if (rc && rc != -EAGAIN)
+	if (rc && rc != -EAGAIN) {
+		/* online is set iff link is online && reset succeeded */
+		if (online)
+			*online = false;
 		ata_link_printk(link, KERN_ERR,
 				"COMRESET failed (errno=%d)\n", rc);
+	}
 	DPRINTK("EXIT, rc=%d\n", rc);
 	return rc;
 }
@@ -3700,8 +3700,14 @@ int sata_std_hardreset(struct ata_link *link, unsigned int *class,
  */
 void ata_std_postreset(struct ata_link *link, unsigned int *classes)
 {
+	u32 serror;
+
 	DPRINTK("ENTER\n");
 
+	/* reset complete, clear SError */
+	if (!sata_scr_read(link, SCR_ERROR, &serror))
+		sata_scr_write(link, SCR_ERROR, serror);
+
 	/* print link status */
 	sata_print_link_status(link);
 
@@ -3894,8 +3900,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	{ "SAMSUNG CD-ROM SN-124", "N001",	ATA_HORKAGE_NODMA },
 	{ "Seagate STT20000A", NULL,		ATA_HORKAGE_NODMA },
 	/* Odd clown on sil3726/4726 PMPs */
-	{ "Config  Disk",	NULL,		ATA_HORKAGE_NODMA |
-						ATA_HORKAGE_SKIP_PM },
+	{ "Config  Disk",	NULL,		ATA_HORKAGE_DISABLE },
 
 	/* Weird ATAPI devices */
 	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
@@ -5616,7 +5621,7 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 			spin_lock_irqsave(ap->lock, flags);
 
 			ehi->probe_mask |= ATA_ALL_DEVICES;
-			ehi->action |= ATA_EH_RESET;
+			ehi->action |= ATA_EH_RESET | ATA_EH_LPM;
 			ehi->flags |= ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET;
 
 			ap->pflags &= ~ATA_PFLAG_INITIALIZING;
@@ -5649,7 +5654,6 @@ int ata_host_register(struct ata_host *host, struct scsi_host_template *sht)
 		struct ata_port *ap = host->ports[i];
 
 		ata_scsi_scan_host(ap, 1);
-		ata_lpm_schedule(ap, ap->pm_policy);
 	}
 
 	return 0;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 62e0331..7894d83 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -1308,12 +1308,7 @@ static void ata_eh_analyze_serror(struct ata_link *link)
 	unsigned int err_mask = 0, action = 0;
 	u32 hotplug_mask;
 
-	if (serror & SERR_PERSISTENT) {
-		err_mask |= AC_ERR_ATA_BUS;
-		action |= ATA_EH_RESET;
-	}
-	if (serror &
-	    (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
+	if (serror & (SERR_PERSISTENT | SERR_DATA)) {
 		err_mask |= AC_ERR_ATA_BUS;
 		action |= ATA_EH_RESET;
 	}
@@ -2047,19 +2042,11 @@ static int ata_do_reset(struct ata_link *link, ata_reset_fn_t reset,
 			unsigned int *classes, unsigned long deadline)
 {
 	struct ata_device *dev;
-	int rc;
</