LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Jonathan Corbet <corbet@lwn.net>
To: Robert Hancock <hancockr@shaw.ca>
Cc: e1000-devel@lists.sourceforge.net, LKML <linux-kernel@vger.kernel.org>
Subject: Re: 2.6.28-rc2 hates my e1000e
Date: Thu, 30 Oct 2008 20:58:51 -0600	[thread overview]
Message-ID: <20081030205851.3208f52f@bike.lwn.net> (raw)
In-Reply-To: <490A5532.2000704@shaw.ca>

On Thu, 30 Oct 2008 18:45:38 -0600
Robert Hancock <hancockr@shaw.ca> wrote:

> What's in /proc/iomem? Full dmesg output from boot would also be
> useful.

/proc/iomem looks like this with 2.6.28-rc2:

00000000-0009fbff : System RAM
000f0000-000fffff : reserved
00100000-be4ff7ff : System RAM
  00200000-004a6e45 : Kernel code
  004a6e46-00649b77 : Kernel data
  006c4000-007585ff : Kernel bss
be4ff800-be553bff : ACPI Non-volatile Storage
be553c00-be555bff : ACPI Tables
be555c00-beffffff : reserved
c0000000-cfffffff : 0000:00:02.0
d0000000-d3ffffff : PCI Bus 0000:02
  d0000000-d3ffffff : 0000:02:00.0
    d0000000-d07fffff : ivtv encoder
    d2000000-d200ffff : ivtv registers
d4000000-d4000fff : Intel Flush Page
e0000000-fe7fffff : reserved
fe800000-fe8fffff : PCI Bus 0000:01
  fe800000-fe8fffff : reserved
fe900000-fe9d9aff : reserved
fe9d9b00-fe9d9bff : 0000:00:1f.3
  fe9d9b00-fe9d9bff : reserved
fe9d9c00-fe9d9fff : 0000:00:1a.7
  fe9d9c00-fe9d9fff : reserved
fe9da000-fe9dafff : 0000:00:03.3
  fe9da000-fe9dafff : reserved
fe9db000-fe9dbfff : 0000:00:19.0
  fe9db000-fe9dbfff : reserved
fe9dc000-fe9dffff : 0000:00:1b.0
  fe9dc000-fe9dffff : reserved
fe9e0000-fe9fffff : 0000:00:19.0
  fe9e0000-fe9fffff : reserved
fea00000-fea7ffff : 0000:00:02.0
  fea00000-fea7ffff : reserved
fea80000-feafffff : 0000:00:02.1
  fea80000-feafffff : reserved
feb00000-febfffff : 0000:00:02.0
  feb00000-febfffff : reserved
fec00000-fed003ff : reserved
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0
fed20000-fed9ffff : reserved
fedad000-fedad00f : 0000:00:03.0
fee00000-feefffff : reserved
  fee00000-fee00fff : Local APIC
ff980800-ff980bff : 0000:00:1d.7
  ff980800-ff980bff : ehci_hcd
ffb00000-ffffffff : reserved

Remember that I/O memory is alleged to be at:

> 	Region 0: Memory at fe9e0000 (32-bit, non-prefetchable) [size=128K]
> 	Region 1: Memory at fe9db000 (32-bit, non-prefetchable) [size=4K]

These regions are marked "reserved" in this map.

The 2.6.27 view of I/O memory is rather different:

00000000-0009fbff : System RAM
000f0000-000fffff : reserved
00100000-be4ff7ff : System RAM
  00200000-004b4d12 : Kernel code
  004b4d13-0073000f : Kernel data
  011b6000-0127e58f : Kernel bss
be4ff800-be553bff : ACPI Non-volatile Storage
be553c00-be555bff : ACPI Tables
be555c00-beffffff : reserved
c0000000-cfffffff : 0000:00:02.0
d0000000-d3ffffff : PCI Bus 0000:02
  d0000000-d3ffffff : 0000:02:00.0
    d0000000-d07fffff : ivtv encoder
    d2000000-d200ffff : ivtv registers
d4000000-d40fffff : 0000:00:02.0
d4100000-d417ffff : 0000:00:02.0
d4180000-d41fffff : 0000:00:02.1
d4200000-d421ffff : 0000:00:19.0
  d4200000-d421ffff : e1000e
d4220000-d4223fff : 0000:00:1b.0
  d4220000-d4223fff : ICH HD audio
d4224000-d4224fff : 0000:00:03.3
d4225000-d4225fff : 0000:00:19.0
  d4225000-d4225fff : e1000e
d4226000-d42263ff : 0000:00:1a.7
  d4226000-d42263ff : ehci_hcd
d4226400-d42264ff : 0000:00:1f.3
d4227000-d4227fff : Intel Flush Page
e0000000-fed003ff : reserved
  fec00000-fec00fff : IOAPIC 0
  fed00000-fed003ff : HPET 0
fed20000-fed9ffff : reserved
fedad000-fedad00f : 0000:00:03.0
fee00000-feefffff : reserved
  fee00000-fee00fff : Local APIC
ff980800-ff980bff : 0000:00:1d.7
  ff980800-ff980bff : ehci_hcd
ffb00000-ffffffff : reserved

The 2.6.28-rc2 dmesg output follows.  

> GSI 23 (level, low) -> IRQ 23
[    5.480562] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    5.480565] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    5.480688] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[    5.484666] ehci_hcd 0000:00:1d.7: debug port 1
[    5.484719] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[    5.484734] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800
[    5.496687] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    5.496900] usb usb1: configuration #1 chosen from 1 choice
[    5.497008] hub 1-0:1.0: USB hub found
[    5.497062] hub 1-0:1.0: 6 ports detected
[    5.497327] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.497382] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.497455] usb usb1: Product: EHCI Host Controller
[    5.497505] usb usb1: Manufacturer: Linux 2.6.28-rc2 ehci_hcd
[    5.497557] usb usb1: SerialNumber: 0000:00:1d.7
[    5.497647] uhci_hcd: USB Universal Host Controller Interface driver
[    5.497726] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    5.497786] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    5.497789] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    5.497884] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 2
[    5.497986] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20
[    5.498146] usb usb2: configuration #1 chosen from 1 choice
[    5.498250] hub 2-0:1.0: USB hub found
[    5.498303] hub 2-0:1.0: 2 ports detected
[    5.498520] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    5.498576] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.498648] usb usb2: Product: UHCI Host Controller
[    5.498698] usb usb2: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[    5.498751] usb usb2: SerialNumber: 0000:00:1a.0
[    5.498818] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.498878] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    5.498881] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    5.498976] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 3
[    5.499079] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00
[    5.499255] usb usb3: configuration #1 chosen from 1 choice
[    5.499358] hub 3-0:1.0: USB hub found
[    5.499416] hub 3-0:1.0: 2 ports detected
[    5.499634] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    5.499690] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.499762] usb usb3: Product: UHCI Host Controller
[    5.499813] usb usb3: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[    5.499865] usb usb3: SerialNumber: 0000:00:1a.1
[    5.499931] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    5.499990] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    5.499993] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    5.500098] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    5.500193] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80
[    5.500359] usb usb4: configuration #1 chosen from 1 choice
[    5.500463] hub 4-0:1.0: USB hub found
[    5.500515] hub 4-0:1.0: 2 ports detected
[    5.500736] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[    5.500792] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.500865] usb usb4: Product: UHCI Host Controller
[    5.503087] usb usb4: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[    5.503139] usb usb4: SerialNumber: 0000:00:1d.0
[    5.503205] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    5.503265] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    5.503268] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    5.503369] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
[    5.503463] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
[    5.503627] usb usb5: configuration #1 chosen from 1 choice
[    5.503737] hub 5-0:1.0: USB hub found
[    5.503789] hub 5-0:1.0: 2 ports detected
[    5.504020] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[    5.504076] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.504149] usb usb5: Product: UHCI Host Controller
[    5.504199] usb usb5: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[    5.504251] usb usb5: SerialNumber: 0000:00:1d.1
[    5.504317] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    5.504376] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    5.504379] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    5.504485] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
[    5.504580] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
[    5.504751] usb usb6: configuration #1 chosen from 1 choice
[    5.504858] hub 6-0:1.0: USB hub found
[    5.504910] hub 6-0:1.0: 2 ports detected
[    5.505145] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[    5.505201] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.505274] usb usb6: Product: UHCI Host Controller
[    5.505324] usb usb6: Manufacturer: Linux 2.6.28-rc2 uhci_hcd
[    5.505376] usb usb6: SerialNumber: 0000:00:1d.2
[    5.505526] usbcore: registered new interface driver usblp
[    5.505580] Initializing USB Mass Storage driver...
[    5.505690] usbcore: registered new interface driver usb-storage
[    5.505745] USB Mass Storage support registered.
[    5.505951] PNP: No PS/2 controller found. Probing ports directly.
[    5.508550] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.508603] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.508780] mice: PS/2 mouse device common for all mice
[    5.509019] coretemp coretemp.0: Using relative temperature scale!
[    5.509172] coretemp coretemp.1: Using relative temperature scale!
[    5.509284] EDAC MC: Ver: 2.1.0 Oct 30 2008
[    5.509919] TCP bic registered
[    5.509967] NET: Registered protocol family 17
[    5.510236] registered taskstats version 1
[    5.634462] kjournald starting.  Commit interval 5 seconds
[    5.634555] EXT3-fs: mounted filesystem with ordered data mode.
[    5.634623] VFS: Mounted root (ext3 filesystem) readonly.
[    5.634686] Freeing unused kernel memory: 340k freed
[    5.803374] usb 1-3: new high speed USB device using ehci_hcd and address 2
[    5.927226] usb 1-3: configuration #1 chosen from 1 choice
[    5.927526] hub 1-3:1.0: USB hub found
[    5.927678] hub 1-3:1.0: 4 ports detected
[    5.928869] usb 1-3: New USB device found, idVendor=050d, idProduct=0234
[    5.928925] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    6.140038] usb 2-2: new low speed USB device using uhci_hcd and address 2
[    6.314237] usb 2-2: configuration #1 chosen from 1 choice
[    6.317404] usb 2-2: New USB device found, idVendor=046d, idProduct=c01b
[    6.317462] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.317518] usb 2-2: Product: USB-PS/2 Optical Mouse
[    6.317569] usb 2-2: Manufacturer: Logitech
[    6.543376] usb 6-2: new full speed USB device using uhci_hcd and address 2
[    6.716827] usb 6-2: configuration #1 chosen from 1 choice
[    6.719722] hub 6-2:1.0: USB hub found
[    6.721625] hub 6-2:1.0: 3 ports detected
[    6.726875] usb 6-2: New USB device found, idVendor=046d, idProduct=0b04
[    6.726940] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.726999] usb 6-2: Product: Logitech BT Mini-Receiver
[    6.727053] usb 6-2: Manufacturer: Logitech
[    6.994617] usb 6-2.2: new full speed USB device using uhci_hcd and address 3
[    7.138819] usb 6-2.2: configuration #1 chosen from 1 choice
[    7.144935] usb 6-2.2: New USB device found, idVendor=046d, idProduct=c713
[    7.144993] usb 6-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.145070] usb 6-2.2: Product: Logitech BT Mini-Receiver
[    7.145123] usb 6-2.2: Manufacturer: Logitech
[    7.145174] usb 6-2.2: SerialNumber: 0007617AC3F9
[    7.211612] usb 6-2.3: new full speed USB device using uhci_hcd and address 4
[    7.359357] usb 6-2.3: configuration #1 chosen from 1 choice
[    7.364932] usb 6-2.3: New USB device found, idVendor=046d, idProduct=c714
[    7.364934] usb 6-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    7.364937] usb 6-2.3: Product: Logitech BT Mini-Receiver
[    7.364939] usb 6-2.3: Manufacturer: Logitech
[    7.364940] usb 6-2.3: SerialNumber: 0007617AC3F9
[    8.984747] input: Power Button (FF) as /class/input/input0
[    9.006919] ACPI: Power Button (FF) [PWRF]
[    9.007004] input: Power Button (CM) as /class/input/input1
[    9.021113] ACPI: Power Button (CM) [VBTN]
[    9.048989] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    9.049031] scsi 0:0:1:0: Attached scsi generic sg1 type 5
[    9.049071] sd 1:0:0:0: Attached scsi generic sg2 type 0
[    9.060794] processor ACPI0007:00: registered as cooling_device0
[    9.060845] processor ACPI0007:01: registered as cooling_device1
[    9.065667] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    9.073608] Serial: 8250/16550 driver4 ports, IRQ sharing disabled
[    9.073725] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    9.080203] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[    9.080206] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[    9.080270] e1000e 0000:00:19.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    9.080277] e1000e 0000:00:19.0: BAR 0: can't reserve mem region [0xfe9e0000-0xfe9fffff]
[    9.080284] e1000e 0000:00:19.0: PCI INT A disabled
[    9.080290] e1000e: probe of 0000:00:19.0 failed with error -16
[    9.080958] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[    9.196488] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    9.204233] generic-usb 0003:046D:C01B.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1a.0-2/input0
[    9.210127] input: Logitech Logitech BT Mini-Receiver as /class/input/input3
[    9.219007] Driver 'sr' needs updating - please use bus_type methods
[    9.257039] generic-usb 0003:046D:C713.0002: input,hidraw1: USB HID v1.11 Keyboard [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.2-2.2/input0
[    9.258865] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    9.258870] Uniform CD-ROM driver Revision: 3.20
[    9.258979] sr 0:0:1:0: Attached scsi CD-ROM sr0
[    9.260082] usbcore: registered new interface driver usbhid
[    9.260085] usbhid: v2.6:USB HID core driver
[    9.360339] input: Logitech Logitech BT Mini-Receiver as /class/input/input4
[    9.361821] serial 0000:00:03.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    9.362186] 0000:00:03.3: ttyS1 at I/O 0xec98 (irq = 17) is a 16550A
[    9.393684] logitech 0003:046D:C714.0003: input,hidraw2: USB HID v1.11 Mouse [Logitech Logitech BT Mini-Receiver] on usb-0000:00:1d.2-2.3/input0
[    9.791132] Linux video capture interface: v2.00
[    9.827980] i2c_algo_bit: exports duplicate symbol i2c_bit_add_numbered_bus (owned by kernel)
[    9.838420] ivtv:  Start initialization, version 1.4.0
[    9.838493] ivtv0: Initializing card #0
[    9.838495] ivtv0: Autodetected Hauppauge card (cx23416 based)
[    9.838563] ivtv 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.892690] tveeprom 1-0050: Hauppauge model 32062, rev C199, serial# 8510288
[    9.892694] tveeprom 1-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
[    9.892697] tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
[    9.892699] tveeprom 1-0050: audio processor is MSP3445 (idx 12)
[    9.892701] tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
[    9.892704] tveeprom 1-0050: has no radio, has IR receiver, has no IR transmitter
[    9.892706] ivtv0: Autodetected Hauppauge WinTV PVR-250
[    9.947760] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.947771] HDA Intel 0000:00:1b.0: BAR 0: can't reserve mem region [0xfe9dc000-0xfe9dffff]
[    9.947776] HDA Intel 0000:00:1b.0: PCI INT A disabled
[    9.947789] HDA Intel: probe of 0000:00:1b.0 failed with error -16
[    9.985899] saa7115 1-0021: saa7115 found (1f7115d0e100000) @ 0x42 (ivtv i2c driver #0)
[   10.121484] msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
[   10.121486] msp3400 1-0040: msp3400 supports radio, mode is autodetect and autoselect
[   10.122792] tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
[   10.122800] simple_tuner_attach: driver disabled by Kconfig
[   10.123193] ivtv0: Registered device video0 for encoder MPG (4096 kB)
[   10.123227] ivtv0: Registered device video32 for encoder YUV (2048 kB)
[   10.123260] ivtv0: Registered device vbi0 for encoder VBI (1024 kB)
[   10.123293] ivtv0: Registered device video24 for encoder PCM (320 kB)
[   10.123296] ivtv0: Initialized card #0: Hauppauge WinTV PVR-250
[   10.123316] ivtv:  End initialization
[   12.984403] EXT3 FS on sda7, internal journal
[   13.293069] kjournald starting.  Commit interval 5 seconds
[   13.293232] EXT3 FS on sda1, internal journal
[   13.293240] EXT3-fs: mounted filesystem with ordered data mode.
[   13.334912] kjournald starting.  Commit interval 5 seconds
[   13.335067] EXT3 FS on sda8, internal journal
[   13.335074] EXT3-fs: mounted filesystem with ordered data mode.
[   13.346061] kjournald starting.  Commit interval 5 seconds
[   13.346203] EXT3 FS on sda6, internal journal
[   13.346210] EXT3-fs: mounted filesystem with ordered data mode.
[   13.363127] kjournald starting.  Commit interval 5 seconds
[   13.363274] EXT3 FS on sda5, internal journal
[   13.363281] EXT3-fs: mounted filesystem with ordered data mode.
[   13.386583] kjournald starting.  Commit interval 5 seconds
[   13.386747] EXT3 FS on sda2, internal journal
[   13.386754] EXT3-fs: mounted filesystem with ordered data mode.
[   13.411607] kjournald starting.  Commit interval 5 seconds
[   13.411738] EXT3 FS on sda3, internal journal
[   13.411744] EXT3-fs: mounted filesystem with ordered data mode.
[   13.426394] kjournald starting.  Commit interval 5 seconds
[   13.426698] EXT3 FS on sdb1, internal journal
[   13.426705] EXT3-fs: mounted filesystem with ordered data mode.
[   14.732391] Adding 1020088k swap on /dev/sda9.  Priority:-1 extents:1 across:1020088k
[   15.130376] platform microcode: firmware: requesting intel-ucode/06-0f-0d
[   15.147907] platform microcode: firmware: requesting intel-ucode/06-0f-0d
[   15.151183] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk> <peter.oruba@amd.com>
[   15.357831] microcode: CPU0 updated from revision 0xa1 to 0xa3, date = 2007-08-13 
[   15.359162] microcode: CPU1 updated from revision 0xa1 to 0xa3, date = 2007-08-13 
[   15.382263] Microcode Update Driver: v2.00 removed.
[   16.935369] RPC: Registered udp transport module.
[   16.935373] RPC: Registered tcp transport module.
[   17.620320] fuse init (API version 7.10)
[   23.180051] ivtv 0000:02:00.0: firmware: requesting v4l-cx2341x-enc.fw
[   23.381383] ivtv0: Loaded v4l-cx2341x-enc.fw firmware (376836 bytes)
[   23.580158] ivtv0: Encoder revision: 0x02060039
[   23.601314] tuner 1-0061: Tuner has no way to set tv freq
[   23.666053] tuner 1-0061: Tuner has no way to set tv freq
[   26.775435] pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   26.775439] pci 0000:00:02.0: enabling bus mastering
[   26.775443] pci 0000:00:02.0: setting latency timer to 64
[   26.775508] pci 0000:00:02.0: irq 46 for MSI/MSI-X
[   26.775657] [drm] Initialized i915 1.6.0 20080730 on minor 0
[   26.788761] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining

Thanks,

jon

  reply	other threads:[~2008-10-31  2:59 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <fa.P5jmIAOhSJ192sfWD+qlec07fe8@ifi.uio.no>
2008-10-31  0:45 ` Robert Hancock
2008-10-31  2:58   ` Jonathan Corbet [this message]
2008-10-31  4:08     ` Yinghai Lu
2008-10-31 15:07       ` Linus Torvalds
2008-10-31 15:44         ` Linus Torvalds
2008-10-31 16:00           ` Jonathan Corbet
2008-10-31 16:24             ` Linus Torvalds
2008-10-31 16:35               ` Yinghai Lu
2008-10-31 16:46                 ` Linus Torvalds
2008-10-31 16:51               ` Jonathan Corbet
2008-10-31 16:58                 ` Linus Torvalds
2008-10-31 20:20                   ` Yinghai Lu
2008-11-01 15:01                   ` Jonathan Corbet
2008-11-01 17:16                     ` Linus Torvalds
2008-11-01 17:35                       ` Steven Rostedt
2008-11-01 19:50                       ` Yinghai Lu
2008-11-01 22:45                         ` Jonathan Corbet
2008-11-01 22:47                           ` Yinghai Lu
2008-11-01 23:18                           ` Linus Torvalds
2008-11-02  1:26                             ` Robert Hancock
2008-10-30 23:44 Jonathan Corbet

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20081030205851.3208f52f@bike.lwn.net \
    --to=corbet@lwn.net \
    --cc=e1000-devel@lists.sourceforge.net \
    --cc=hancockr@shaw.ca \
    --cc=linux-kernel@vger.kernel.org \
    --subject='Re: 2.6.28-rc2 hates my e1000e' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).