LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* linux-next: Tree for November 5
@ 2008-11-05  7:43 Stephen Rothwell
  2008-11-05 17:24 ` Mac802.11/iwlagn call trace in " Nico -telmich- Schottelius
  0 siblings, 1 reply; 2+ messages in thread
From: Stephen Rothwell @ 2008-11-05  7:43 UTC (permalink / raw)
  To: linux-next; +Cc: LKML

[-- Attachment #1: Type: text/plain, Size: 6985 bytes --]

Hi all,

Changes since 20081103:

New tree:
	cputime

Dropped trees (temporarily):
	v4l-dvb (due to an unfixed build failure)
	semaphore-removal (due to unfixed conflicts against Linus' tree)
	creds (non obvious conflict)
	userns (because it depends on the creds tree)

Removed tree:
	tests (maybe revived in the future)

The s390 tree lost its 2 conflicts.

The slab tree lost all its conflicts and its build fix.

The creds tree gained a conflict against the security-testing tree which
did not have an obvious fix, so I have dropped the tree for today.

I have also applied the following patches for known problems:

	Revert "qlogicpti: use request_firmware"
	cpu_alloc: per_cpu_offset is already defined for !CONFIG_SMP
	ps3: ps3-lpm.c compile fix
	cell: fix ras.c compilation

----------------------------------------------------------------------------

I have created today's linux-next tree at
git://git.kernel.org/pub/scm/linux/kernel/git/sfr/linux-next.git
(patches at
http://www.kernel.org/pub/linux/kernel/people/sfr/linux-next/).  If you
are tracking the linux-next tree using git, you should not use "git pull"
to do so as that will try to merge the new linux-next release with the
old one.  You should use "git fetch" as mentioned in the FAQ on the wiki
(see below).

You can see which trees have been included by looking in the Next/Trees
file in the source.  There are also quilt-import.log and merge.log files
in the Next directory.  Between each merge, the tree was built with
a ppc64_defconfig for powerpc and an allmodconfig for x86_64. After the
final fixups, it is also built with powerpc allnoconfig,
44x_defconfig and allyesconfig and i386, sparc and sparc64 defconfig.

Below is a summary of the state of the merge.

We are up to 122 trees (counting Linus' and 14 trees of patches pending for
Linus' tree), more are welcome (even if they are currently empty).
Thanks to those who have contributed, and to those who haven't, please do.

Status of my local build tests will be at
http://kisskb.ellerman.id.au/linux-next .  If maintainers want to give
advice about cross compilers/configs that work, we are always open to add
more builds.

Thanks to Jan Dittmer for adding the linux-next tree to his build tests
at http://l4x.org/k/ , the guys at http://test.kernel.org/ and Randy
Dunlap for doing many randconfig builds.

There is a wiki covering stuff to do with linux-next at
http://linux.f-seidel.de/linux-next/pmwiki/ .  Thanks to Frank Seidel.

-- 
Cheers,
Stephen Rothwell                    sfr@canb.auug.org.au

$ git checkout master
$ git reset --hard stable
Merging origin/master
Merging powerpc-merge/merge
Merging scsi-rc-fixes/master
Merging net-current/master
Merging sparc-current/master
Merging sound-current/for-linus
Merging arm-current/master
Merging pci-current/for-linus
Merging wireless-current/master
Merging kbuild-current/master
Merging quilt/driver-core.current
Merging quilt/usb.current
Merging cpufreq-current/fixes
Merging input-current/for-linus
Merging md-current/for-2.6.26
Merging dwmw2/master
Merging arm/devel
Merging avr32/avr32-arch
Merging blackfin/for-linus
Merging cris/for-next
Merging ia64/test
Merging quilt/m68k
Merging m68knommu/for-next
Merging mips/mips-for-linux-next
Merging parisc/master
Merging powerpc/powerpc-next
Merging 4xx/next
Merging galak/next
Merging pxa/for-next
Merging s390/features
Merging sh/master
Merging sparc/master
Merging x86/auto-x86-next
Merging xtensa/master
Merging quilt/driver-core
Merging quilt/usb
Merging tip-core/auto-core-next
Merging cpus4096/auto-cpus4096-next
Merging ftrace/auto-ftrace-next
Merging genirq/auto-genirq-next
Merging safe-poison-pointers/auto-safe-poison-pointers-next
Merging sched/auto-sched-next
Merging stackprotector/auto-stackprotector-next
Merging timers/auto-timers-next
Merging pci/linux-next
Merging quilt/device-mapper
Merging hid/mm
Merging quilt/i2c
Merging quilt/jdelvare-hwmon
Merging quilt/kernel-doc
Merging jfs/next
Merging kbuild/master
Merging quilt/ide
Merging libata/NEXT
Merging nfs/linux-next
Merging xfs/master
Applying fs: xfs needs inode_wait to be exported
Merging infiniband/for-next
Merging acpi/test
Merging nfsd/nfsd-next
Merging ieee1394/for-next
Merging ubi/linux-next
Merging kvm/master
Merging dlm/next
Merging scsi/master
Merging ocfs2/linux-next
Merging ext4/next
Merging async_tx/next
Merging udf/for_next
Merging net/master
Merging mtd/master
Merging wireless/master
Merging crypto/master
Merging vfs/for-next
Merging sound/for-next
Merging cpufreq/next
Merging v9fs/for-next
Merging quilt/rr
Merging cifs/master
Merging mmc/next
Merging gfs2/master
Merging input/next
Merging semaphore/semaphore
Merging bkl-removal/bkl-removal
Merging ubifs/linux-next
Merging lsm/for-next
Merging block/for-next
Merging embedded/master
Merging firmware/master
CONFLICT (content): Merge conflict in drivers/scsi/qlogicpti.c
CONFLICT (content): Merge conflict in firmware/WHENCE
Merging pcmcia/master
Merging battery/master
Merging leds/for-mm
Merging backlight/for-mm
Merging kgdb/kgdb-next
Merging slab/for-next
Merging uclinux/for-next
Merging md/for-next
Merging kmemcheck/auto-kmemcheck-next
CONFLICT (content): Merge conflict in MAINTAINERS
CONFLICT (content): Merge conflict in arch/x86/mm/Makefile
CONFLICT (content): Merge conflict in mm/slab.c
CONFLICT (content): Merge conflict in mm/slub.c
Merging generic-ipi/auto-generic-ipi-next
Merging mfd/for-next
Merging hdlc/hdlc-next
CONFLICT (delete/modify): Documentation/DocBook/wanbook.tmpl deleted in hdlc/hdlc-next and modified in HEAD. Version HEAD of Documentation/DocBook/wanbook.tmpl left in tree.
CONFLICT (delete/modify): drivers/net/wan/syncppp.c deleted in hdlc/hdlc-next and modified in HEAD. Version HEAD of drivers/net/wan/syncppp.c left in tree.
$ git rm -f drivers/net/wan/syncppp.c Documentation/DocBook/wanbook.tmpl
Merging drm/drm-next
Merging voltage/for-linus
Merging security-testing/next
Merging lblnet/master
Merging quilt/ttydev
Merging agp/agp-next
Merging oprofile/auto-oprofile-next
Merging fastboot/auto-fastboot-next
Merging sparseirq/auto-sparseirq-next
Merging iommu/auto-iommu-next
Merging uwb/for-upstream
Merging watchdog/master
Merging proc/proc
Merging bdev/master
Merging dwmw2-iommu/master
Merging cpu_alloc/cpu_alloc
CONFLICT (content): Merge conflict in kernel/lockdep.c
CONFLICT (content): Merge conflict in kernel/module.c
Merging cputime/cputime
Merging scsi-post-merge/master
CONFLICT (content): Merge conflict in drivers/scsi/qlogicpti.c
CONFLICT (content): Merge conflict in firmware/WHENCE
mark the corrected paths with 'git add <paths>' or 'git rm <paths>' and commit the result.
Applying ps3: ps3-lpm.c compile fix
Applying cell: fix ras.c compilation
Applying cpu_alloc: per_cpu_offset is already defined for !CONFIG_SMP

[-- Attachment #2: Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Mac802.11/iwlagn call trace in linux-next: Tree for November 5
  2008-11-05  7:43 linux-next: Tree for November 5 Stephen Rothwell
@ 2008-11-05 17:24 ` Nico -telmich- Schottelius
  0 siblings, 0 replies; 2+ messages in thread
From: Nico -telmich- Schottelius @ 2008-11-05 17:24 UTC (permalink / raw)
  To: Stephen Rothwell; +Cc: linux-next, LKML


[-- Attachment #1.1: Type: text/plain, Size: 180 bytes --]

Hello!

Stephen Rothwell [Wed, Nov 05, 2008 at 06:43:29PM +1100]:
> Hi all,
> 
> Changes since 20081103:

Call trace reported on Lenovo X200 attached.

Sincerly,

Nico

[-- Attachment #1.2: dmesg.2.6.28-rc3-next-20081105-denkbrett --]
[-- Type: text/plain, Size: 45002 bytes --]

[    0.000000] BIOS EBDA/lowmem at: 0009ec00/0009ec00
[    0.000000] Linux version 2.6.28-rc3-next-20081105-denkbrett (compiler@ikn) (gcc version 4.3.2 (Debian 4.3.2-1) ) #11 SMP PREEMPT Wed Nov 5 17:22:59 CET 2008
[    0.000000] Command line: root=/dev/sda1 ro init=/bin/sh
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
[    0.000000]  BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000007c4a1000 (usable)
[    0.000000]  BIOS-e820: 000000007c4a1000 - 000000007c4a7000 (reserved)
[    0.000000]  BIOS-e820: 000000007c4a7000 - 000000007c5b7000 (usable)
[    0.000000]  BIOS-e820: 000000007c5b7000 - 000000007c60f000 (reserved)
[    0.000000]  BIOS-e820: 000000007c60f000 - 000000007c6c6000 (usable)
[    0.000000]  BIOS-e820: 000000007c6c6000 - 000000007c6d1000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007c6d1000 - 000000007c6d4000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007c6d4000 - 000000007c6d8000 (reserved)
[    0.000000]  BIOS-e820: 000000007c6d8000 - 000000007c6dc000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007c6dc000 - 000000007c6df000 (reserved)
[    0.000000]  BIOS-e820: 000000007c6df000 - 000000007c706000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007c706000 - 000000007c708000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007c708000 - 000000007c90f000 (reserved)
[    0.000000]  BIOS-e820: 000000007c90f000 - 000000007c99f000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000007c99f000 - 000000007c9ff000 (ACPI data)
[    0.000000]  BIOS-e820: 000000007c9ff000 - 000000007ca00000 (usable)
[    0.000000]  BIOS-e820: 000000007cc00000 - 000000007f000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
[    0.000000] DMI present.
[    0.000000] last_pfn = 0x7ca00 max_arch_pfn = 0x3ffffffff
[    0.000000] init_memory_mapping: 0000000000000000-000000007ca00000
[    0.000000]  0000000000 - 007ca00000 page 2M
[    0.000000] kernel direct mapping tables up to 7ca00000 @ 8000-b000
[    0.000000] last_map_addr: 7ca00000 end: 7ca00000
[    0.000000] ACPI: RSDP 000F73A0, 0024 (r2 LENOVO)
[    0.000000] ACPI: XSDT 7C97BD45, 009C (r1 LENOVO TP-6D        1050  LTP        0)
[    0.000000] ACPI: FACP 7C97BF00, 00F4 (r3 LENOVO TP-6D        1050 LNVO        1)
[    0.000000] ACPI: DSDT 7C97C2F4, D910 (r1 LENOVO TP-6D        1050 MSFT  3000000)
[    0.000000] ACPI: FACS 7C98E000, 0040
[    0.000000] ACPI: SSDT 7C97C0B4, 0240 (r1 LENOVO TP-6D        1050 MSFT  3000000)
[    0.000000] ACPI: ECDT 7C989C04, 0052 (r1 LENOVO TP-6D        1050 LNVO        1)
[    0.000000] ACPI: APIC 7C989C56, 0078 (r1 LENOVO TP-6D        1050 LNVO        1)
[    0.000000] ACPI: MCFG 7C989CCE, 003C (r1 LENOVO TP-6D        1050 LNVO        1)
[    0.000000] ACPI: HPET 7C989D0A, 0038 (r1 LENOVO TP-6D        1050 LNVO        1)
[    0.000000] ACPI: SLIC 7C989DC2, 0176 (r1 LENOVO TP-6D        1050  LTP        0)
[    0.000000] ACPI: BOOT 7C989F38, 0028 (r1 LENOVO TP-6D        1050  LTP        1)
[    0.000000] ACPI: ASF! 7C989F60, 00A0 (r16 LENOVO TP-6D        1050 PTL         1)
[    0.000000] ACPI: SSDT 7C98D203, 055F (r1 LENOVO TP-6D        1050 INTL 20050513)
[    0.000000] ACPI: TCPA 7C707000, 0032 (r0                        0             0)
[    0.000000] ACPI: DMAR 7C706000, 0120 (r1               \x01        1             0)
[    0.000000] ACPI: SSDT 7C6D3000, 0655 (r1  PmRef    CpuPm     3000 INTL 20050624)
[    0.000000] ACPI: SSDT 7C6D2000, 0274 (r1  PmRef  Cpu0Tst     3000 INTL 20050624)
[    0.000000] ACPI: SSDT 7C6D1000, 0242 (r1  PmRef    ApTst     3000 INTL 20050624)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] (5 early reservations) ==> bootmem [0000000000 - 007ca00000]
[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> [0000000000 - 0000001000]
[    0.000000]   #1 [0000006000 - 0000008000]       TRAMPOLINE ==> [0000006000 - 0000008000]
[    0.000000]   #2 [0000200000 - 00006c929c]    TEXT DATA BSS ==> [0000200000 - 00006c929c]
[    0.000000]   #3 [000009ec00 - 0000100000]    BIOS reserved ==> [000009ec00 - 0000100000]
[    0.000000]   #4 [0000008000 - 0000009000]          PGTABLE ==> [0000008000 - 0000009000]
[    0.000000] found SMP MP-table at [ffff8800000f73e0] 000f73e0
[    0.000000]  [ffffe20000000000-ffffe20001bfffff] PMD -> [ffff880001200000-ffff880002dfffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000000 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00100000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[5] active PFN ranges
[    0.000000]     0: 0x00000000 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x0007c4a1
[    0.000000]     0: 0x0007c4a7 -> 0x0007c5b7
[    0.000000]     0: 0x0007c60f -> 0x0007c6c6
[    0.000000]     0: 0x0007c9ff -> 0x0007ca00
[    0.000000] On node 0 totalpages: 509447
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1328 pages reserved
[    0.000000]   DMA zone: 2614 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 6923 pages used for memmap
[    0.000000]   DMA32 zone: 498526 pages, LIFO batch:31
[    0.000000]   Normal zone: 0 pages used for memmap
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 0, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] Allocating PCI resources starting at 80000000 (gap: 7f000000:61000000)
[    0.000000] PERCPU: Allocating 49152 bytes of per cpu data
[    0.000000] NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 501140
[    0.000000] Kernel command line: root=/dev/sda1 ro init=/bin/sh
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[    0.000000] Extended CMOS year: 2000
[    0.000000] Fast TSC calibration using PIT
[    0.000000] Detected 2260.959 MHz processor.
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.004000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.004000] Memory: 2000036k/2041856k available (2671k kernel code, 4068k absent, 37024k reserved, 1298k data, 336k init)
[    0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.004000] hpet clockevent registered
[    0.004000] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[    0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4521.91 BogoMIPS (lpj=9043836)
[    0.004000] Security Framework initialized
[    0.004000] Mount-cache hash table entries: 256
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 0
[    0.004000] CPU0: Thermal monitoring enabled (TM2)
[    0.004000] using mwait in idle threads.
[    0.004000] ACPI: Core revision 20080926
[    0.038391] Parsing all Control Methods:
[    0.039157] Table [DSDT](id 0001) - 1541 Objects with 67 Devices 413 Methods 31 Regions
[    0.039819] Parsing all Control Methods:
[    0.040586] Table [SSDT](id 0002) - 11 Objects with 0 Devices 7 Methods 0 Regions
[    0.041798] Parsing all Control Methods:
[    0.042563] Table [SSDT](id 0003) - 43 Objects with 2 Devices 6 Methods 0 Regions
[    0.043627] Parsing all Control Methods:
[    0.044425] Table [SSDT](id 0004) - 27 Objects with 0 Devices 16 Methods 0 Regions
[    0.045008] Parsing all Control Methods:
[    0.045786] Table [SSDT](id 0005) - 7 Objects with 0 Devices 4 Methods 0 Regions
[    0.046423] Parsing all Control Methods:
[    0.047205] Table [SSDT](id 0006) - 12 Objects with 0 Devices 12 Methods 0 Regions
[    0.047558]  tbxface-0596 [00] tb_load_namespace     : ACPI Tables successfully acquired
[    0.048011] evxfevnt-0091 [00] enable                : Transition to ACPI mode successful
[    0.048387] Setting APIC routing to flat
[    0.048891] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.089102] CPU0: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
[    0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[    0.004000] Initializing CPU#1
[    0.004000] Calibrating delay using timer specific routine.. 4522.05 BogoMIPS (lpj=9044112)
[    0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K
[    0.004000] CPU: L2 cache: 3072K
[    0.004000] CPU: Physical Processor ID: 0
[    0.004000] CPU: Processor Core ID: 1
[    0.004000] CPU1: Thermal monitoring enabled (TM2)
[    0.177239] CPU1: Intel(R) Core(TM)2 Duo CPU     P8400  @ 2.26GHz stepping 06
[    0.178471] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[    0.180028] Brought up 2 CPUs
[    0.180158] Total of 2 processors activated (9043.97 BogoMIPS).
[    0.180395] net_namespace: 1320 bytes
[    0.184040] regulator: core version 0.5
[    0.184191] NET: Registered protocol family 16
[    0.184217] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.184224] ACPI: bus type pci registered
[    0.184376] PCI: Using configuration type 1 for base access
[    0.194203] evgpeblk-0957 [00] ev_create_gpe_block   : GPE 00 to 3F [_GPE] 8 regs on int 0x9
[    0.196266] ACPI: EC: EC description table is found, configuring boot EC
[    0.200636] Completing Region/Field/Buffer/Package initialization:.........................................................................................................................................................................................................................................................
[    0.227601] Initialized 30/31 Regions 97/97 Fields 51/51 Buffers 71/71 Packages (1650 nodes)
[    0.227936] Initializing Device/Processor/Thermal objects by executing _INI methods:<5>ACPI: BIOS _OSI(Linux) query ignored
[    0.229179] ACPI: DMI System Vendor: LENOVO
[    0.229309] ACPI: DMI Product Name: 7458AH8
[    0.229438] ACPI: DMI Product Version: ThinkPad X200
[    0.229568] ACPI: DMI Board Name: 7458AH8
[    0.229697] ACPI: DMI BIOS Vendor: LENOVO
[    0.229825] ACPI: DMI BIOS Date: 07/30/2008
[    0.229954] ACPI: Please send DMI info above to linux-acpi@vger.kernel.org
[    0.230088] ACPI: If "acpi_osi=Linux" works better, please notify linux-acpi@vger.kernel.org
[    0.228025] ACPI: EC: non-query interrupt received, switching to interrupt mode
[    0.234652] .......
[    0.246829] Executed 7 _INI methods requiring 1 _STA executions (examined 77 objects)
[    0.248227] evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 9 Wake, Enabled 3 Runtime GPEs in this block
[    0.248569] ACPI: Interpreter enabled
[    0.248699] ACPI: (supports S0 S3 S5)
[    0.249002] ACPI: Using IOAPIC for interrupt routing
[    0.292428] ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.292564] ACPI: EC: driver started in interrupt mode
[    0.297519] ACPI: ACPI Dock Station Driver: 3 docks/bays found
[    0.297688] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.297688] pci 0000:00:02.0: reg 10 64bit mmio: [0xf2000000-0xf23fffff]
[    0.297688] pci 0000:00:02.0: reg 18 64bit mmio: [0xd0000000-0xdfffffff]
[    0.297688] pci 0000:00:02.0: reg 20 io port: [0x1800-0x1807]
[    0.297688] pci 0000:00:02.1: reg 10 64bit mmio: [0xf2400000-0xf24fffff]
[    0.297688] pci 0000:00:03.0: reg 10 64bit mmio: [0xf2826800-0xf282680f]
[    0.297688] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
[    0.297688] pci 0000:00:03.0: PME# disabled
[    0.297688] pci 0000:00:19.0: reg 10 32bit mmio: [0xf2600000-0xf261ffff]
[    0.297688] pci 0000:00:19.0: reg 14 32bit mmio: [0xf2625000-0xf2625fff]
[    0.297688] pci 0000:00:19.0: reg 18 io port: [0x1840-0x185f]
[    0.297688] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.297688] pci 0000:00:19.0: PME# disabled
[    0.297688] pci 0000:00:1a.0: reg 20 io port: [0x1860-0x187f]
[    0.297688] pci 0000:00:1a.1: reg 20 io port: [0x1880-0x189f]
[    0.297688] pci 0000:00:1a.2: reg 20 io port: [0x18a0-0x18bf]
[    0.297688] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf2826c00-0xf2826fff]
[    0.297688] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    0.297722] pci 0000:00:1a.7: PME# disabled
[    0.297923] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf2620000-0xf2623fff]
[    0.297975] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.298112] pci 0000:00:1b.0: PME# disabled
[    0.298322] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.298459] pci 0000:00:1c.0: PME# disabled
[    0.298672] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.298808] pci 0000:00:1c.1: PME# disabled
[    0.299024] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.299160] pci 0000:00:1c.3: PME# disabled
[    0.299389] pci 0000:00:1d.0: reg 20 io port: [0x18c0-0x18df]
[    0.299502] pci 0000:00:1d.1: reg 20 io port: [0x18e0-0x18ff]
[    0.299615] pci 0000:00:1d.2: reg 20 io port: [0x1c00-0x1c1f]
[    0.299732] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf2827000-0xf28273ff]
[    0.299798] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    0.300010] pci 0000:00:1d.7: PME# disabled
[    0.300426] pci 0000:00:1f.2: reg 10 io port: [0x1c48-0x1c4f]
[    0.300438] pci 0000:00:1f.2: reg 14 io port: [0x183c-0x183f]
[    0.300449] pci 0000:00:1f.2: reg 18 io port: [0x1c40-0x1c47]
[    0.300461] pci 0000:00:1f.2: reg 1c io port: [0x1838-0x183b]
[    0.300472] pci 0000:00:1f.2: reg 20 io port: [0x1c20-0x1c3f]
[    0.300484] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf2826000-0xf28267ff]
[    0.300512] pci 0000:00:1f.2: PME# supported from D3hot
[    0.300646] pci 0000:00:1f.2: PME# disabled
[    0.300827] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf2827400-0xf28274ff]
[    0.300854] pci 0000:00:1f.3: reg 20 io port: [0x1c60-0x1c7f]
[    0.301072] pci 0000:03:00.0: reg 10 64bit mmio: [0xf2500000-0xf2501fff]
[    0.301157] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.301297] pci 0000:03:00.0: PME# disabled
[    0.301515] pci 0000:00:1c.1: bridge 32bit mmio: [0xf2500000-0xf25fffff]
[    0.301600] pci 0000:00:1c.3: bridge io port: [0x2000-0x2fff]
[    0.301608] pci 0000:00:1c.3: bridge 32bit mmio: [0xf0000000-0xf1ffffff]
[    0.301620] pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf2900000-0xf29fffff]
[    0.301708] pci 0000:00:1e.0: transparent bridge
[    0.301884] bus 00 -> node 0
[    0.301904] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.302780] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
[    0.303180] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[    0.303584] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[    0.316456] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.316535] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.317705] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
[    0.318871] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.320054] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.321221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
[    0.322386] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11)
[    0.323553] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.324349] ACPI: Power Resource [PUBS] (on)
[    0.328605] SCSI subsystem initialized
[    0.328605] libata version 3.00 loaded.
[    0.328605] PCI: Using ACPI for IRQ routing
[    0.340029] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[    0.340389] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[    0.362683] pnp: PnP ACPI init
[    0.362825] ACPI: bus type pnp registered
[    0.432411] pnp: PnP ACPI: found 10 devices
[    0.432544] ACPI: ACPI bus type pnp unregistered
[    0.432691] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[    0.432827] system 00:00: iomem range 0xc0000-0xc3fff has been reserved
[    0.432962] system 00:00: iomem range 0xc4000-0xc7fff has been reserved
[    0.433097] system 00:00: iomem range 0xc8000-0xcbfff has been reserved
[    0.433232] system 00:00: iomem range 0xcc000-0xcffff has been reserved
[    0.433367] system 00:00: iomem range 0xd0000-0xd3fff has been reserved
[    0.433503] system 00:00: iomem range 0xdc000-0xdffff could not be reserved
[    0.433639] system 00:00: iomem range 0xe0000-0xe3fff could not be reserved
[    0.433774] system 00:00: iomem range 0xe4000-0xe7fff could not be reserved
[    0.433910] system 00:00: iomem range 0xe8000-0xebfff could not be reserved
[    0.434046] system 00:00: iomem range 0xec000-0xeffff could not be reserved
[    0.434181] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
[    0.434317] system 00:00: iomem range 0x100000-0x7effffff could not be reserved
[    0.434530] system 00:00: iomem range 0xfec00000-0xfed3ffff could not be reserved
[    0.434757] system 00:00: iomem range 0xfed4c000-0xffffffff could not be reserved
[    0.434979] system 00:02: ioport range 0x164e-0x164f has been reserved
[    0.435114] system 00:02: ioport range 0x1000-0x107f has been reserved
[    0.435249] system 00:02: ioport range 0x1180-0x11ff has been reserved
[    0.435384] system 00:02: ioport range 0x800-0x80f has been reserved
[    0.435519] system 00:02: ioport range 0x15e0-0x15ef has been reserved
[    0.435654] system 00:02: ioport range 0x1600-0x1641 has been reserved
[    0.435789] system 00:02: ioport range 0x1600-0x161b has been reserved
[    0.435926] system 00:02: iomem range 0xe0000000-0xefffffff has been reserved
[    0.436062] system 00:02: iomem range 0xfed1c000-0xfed1ffff has been reserved
[    0.436199] system 00:02: iomem range 0xfed10000-0xfed13fff has been reserved
[    0.436339] system 00:02: iomem range 0xfed18000-0xfed18fff has been reserved
[    0.436475] system 00:02: iomem range 0xfed19000-0xfed19fff has been reserved
[    0.436612] system 00:02: iomem range 0xfed45000-0xfed4bfff has been reserved
[    0.442355] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[    0.442489] pci 0000:00:1c.0:   IO window: disabled
[    0.442625] pci 0000:00:1c.0:   MEM window: disabled
[    0.442771] pci 0000:00:1c.0:   PREFETCH window: disabled
[    0.442910] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[    0.443042] pci 0000:00:1c.1:   IO window: disabled
[    0.443179] pci 0000:00:1c.1:   MEM window: 0xf2500000-0xf25fffff
[    0.443315] pci 0000:00:1c.1:   PREFETCH window: disabled
[    0.443452] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[    0.443587] pci 0000:00:1c.3:   IO window: 0x2000-0x2fff
[    0.443724] pci 0000:00:1c.3:   MEM window: 0xf0000000-0xf1ffffff
[    0.443861] pci 0000:00:1c.3:   PREFETCH window: 0x000000f2900000-0x000000f29fffff
[    0.444080] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:0d
[    0.444212] pci 0000:00:1e.0:   IO window: disabled
[    0.444347] pci 0000:00:1e.0:   MEM window: disabled
[    0.444481] pci 0000:00:1e.0:   PREFETCH window: disabled
[    0.444636] pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.444774] pci 0000:00:1c.0: setting latency timer to 64
[    0.444790] pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.444927] pci 0000:00:1c.1: setting latency timer to 64
[    0.444943] pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[    0.445080] pci 0000:00:1c.3: setting latency timer to 64
[    0.445092] pci 0000:00:1e.0: setting latency timer to 64
[    0.445100] bus: 00 index 0 io port: [0x00-0xffff]
[    0.445231] bus: 00 index 1 mmio: [0x000000-0xffffffffffffffff]
[    0.445364] bus: 02 index 0 mmio: [0x0-0x0]
[    0.445493] bus: 02 index 1 mmio: [0x0-0x0]
[    0.445623] bus: 02 index 2 mmio: [0x0-0x0]
[    0.445752] bus: 02 index 3 mmio: [0x0-0x0]
[    0.445882] bus: 03 index 0 mmio: [0x0-0x0]
[    0.446011] bus: 03 index 1 mmio: [0xf2500000-0xf25fffff]
[    0.446143] bus: 03 index 2 mmio: [0x0-0x0]
[    0.446273] bus: 03 index 3 mmio: [0x0-0x0]
[    0.446403] bus: 05 index 0 io port: [0x2000-0x2fff]
[    0.446534] bus: 05 index 1 mmio: [0xf0000000-0xf1ffffff]
[    0.446679] bus: 05 index 2 mmio: [0xf2900000-0xf29fffff]
[    0.446811] bus: 05 index 3 mmio: [0x0-0x0]
[    0.446940] bus: 0d index 0 mmio: [0x0-0x0]
[    0.447069] bus: 0d index 1 mmio: [0x0-0x0]
[    0.447198] bus: 0d index 2 mmio: [0x0-0x0]
[    0.447328] bus: 0d index 3 io port: [0x00-0xffff]
[    0.447459] bus: 0d index 4 mmio: [0x000000-0xffffffffffffffff]
[    0.447606] NET: Registered protocol family 2
[    0.486774] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.488005] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.490852] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.491805] TCP: Hash tables configured (established 262144 bind 65536)
[    0.491940] TCP reno registered
[    0.502841] NET: Registered protocol family 1
[    0.503438] Simple Boot Flag at 0x35 set to 0x1
[    0.505753] Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.511690] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.518052] JFS: nTxBlock = 8192, nTxLock = 65536
[    0.523204] msgmni has been set to 3907
[    0.523755] io scheduler noop registered
[    0.523886] io scheduler anticipatory registered (default)
[    0.524018] io scheduler deadline registered
[    0.524291] io scheduler cfq registered
[    0.524442] pci 0000:00:02.0: Boot video device
[    0.616576] Switched to high resolution mode on CPU 0
[    0.616582] Switched to high resolution mode on CPU 1
[    0.619731] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[    0.619790] pcieport-driver 0000:00:1c.0: found MSI capability
[    0.619969] pcieport-driver 0000:00:1c.0: irq 47 for MSI/MSI-X
[    0.619992] pci_express 0000:00:1c.0:pcie00: allocate port service
[    0.620099] pci_express 0000:00:1c.0:pcie02: allocate port service
[    0.620264] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[    0.620322] pcieport-driver 0000:00:1c.1: found MSI capability
[    0.620494] pcieport-driver 0000:00:1c.1: irq 46 for MSI/MSI-X
[    0.620517] pci_express 0000:00:1c.1:pcie00: allocate port service
[    0.620597] pci_express 0000:00:1c.1:pcie02: allocate port service
[    0.620757] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[    0.620814] pcieport-driver 0000:00:1c.3: found MSI capability
[    0.620986] pcieport-driver 0000:00:1c.3: irq 45 for MSI/MSI-X
[    0.621009] pci_express 0000:00:1c.3:pcie00: allocate port service
[    0.621100] pci_express 0000:00:1c.3:pcie02: allocate port service
[    0.622561] ACPI: AC Adapter [AC] (off-line)
[    0.654229] ACPI Warning (nspredef-0858): \_SB_.PCI0.LPC_.EC__.BAT0._BIF: Return Package type mismatch at index 9 - found Buffer, expected String [20080926]
[    0.663377] ACPI: Battery Slot [BAT0] (battery present)
[    0.663788] input: Power Button (FF) as /class/input/input0
[    0.663924] ACPI: Power Button (FF) [PWRF]
[    0.664218] input: Lid Switch as /class/input/input1
[    0.664973] ACPI: Lid Switch [LID]
[    0.665287] input: Sleep Button (CM) as /class/input/input2
[    0.665427] ACPI: Sleep Button (CM) [SLPB]
[    0.667524] ACPI: SSDT 7C6D6C20, 02C8 (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
[    0.667928] Parsing all Control Methods:
[    0.668714] Table [SSDT](id 0018) - 6 Objects with 0 Devices 4 Methods 0 Regions
[    0.669799] ACPI: SSDT 7C6D4020, 087A (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
[    0.670302] Parsing all Control Methods:
[    0.671094] Table [SSDT](id 0019) - 16 Objects with 0 Devices 1 Methods 0 Regions
[    0.682044] Monitor-Mwait will be used to enter C-1 state
[    0.682051] Monitor-Mwait will be used to enter C-2 state
[    0.682057] Monitor-Mwait will be used to enter C-3 state
[    0.682066] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[    0.682627] processor ACPI0007:00: registered as cooling_device0
[    0.682784] ACPI: Processor [CPU0] (supports 8 throttling states)
[    0.684506] ACPI: SSDT 7C6D5CA0, 01CF (r1  PmRef    ApIst     3000 INTL 20050624)
[    0.684965] Parsing all Control Methods:
[    0.685764] Table [SSDT](id 0026) - 12 Objects with 0 Devices 12 Methods 0 Regions
[    0.686586] ACPI: SSDT 7C6D5F20, 008D (r1  PmRef    ApCst     3000 INTL 20050624)
[    0.686963] Parsing all Control Methods:
[    0.687761] Table [SSDT](id 0028) - 3 Objects with 0 Devices 3 Methods 0 Regions
[    0.692535] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    0.692944] processor ACPI0007:01: registered as cooling_device1
[    0.693094] ACPI: Processor [CPU1] (supports 8 throttling states)
[    0.721033] Marking TSC unstable due to possible TSC halt in C2
[    0.743823] thermal LNXTHERM:01: registered as thermal_zone0
[    0.748048] ACPI: Thermal Zone [THM0] (33 C)
[    0.750721] thermal LNXTHERM:02: registered as thermal_zone1
[    0.753730] ACPI: Thermal Zone [THM1] (31 C)
[    0.889076] Linux agpgart interface v0.103
[    1.000234] Clocksource tsc unstable (delta = -132158243 ns)
[    3.904279] floppy0: no floppy controllers found
[    3.911047] brd: module loaded
[    3.911476] Uniform Multi-Platform E-IDE driver
[    3.911995] ide-gd driver 1.18
[    3.912858] Driver 'sd' needs updating - please use bus_type methods
[    3.913164] ahci 0000:00:1f.2: version 3.0
[    3.913193] ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[    3.913404] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[    3.913497] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[    3.913713] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part 
[    3.913930] ahci 0000:00:1f.2: setting latency timer to 64
[    3.914288] scsi0 : ahci
[    3.914754] scsi1 : ahci
[    3.915243] scsi2 : ahci
[    3.915661] scsi3 : ahci
[    3.917398] ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 44
[    3.917613] ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 44
[    3.917824] ata3: DUMMY
[    3.917949] ata4: DUMMY
[    4.236260] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    4.281202] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[    4.281210] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    4.281489] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[    4.281497] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    4.282525] ata1.00: ATA-8: ST9250827AS, 3.CMF, max UDMA/100
[    4.282660] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    4.292119] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 succeeded
[    4.292126] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 filtered out
[    4.292359] ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 succeeded
[    4.292365] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 filtered out
[    4.293401] ata1.00: configured for UDMA/100
[    4.321098] ata1.00: configured for UDMA/100
[    4.321238] ata1: EH complete
[    4.640265] ata2: SATA link down (SStatus 0 SControl 300)
[    4.704418] scsi 0:0:0:0: Direct-Access     ATA      ST9250827AS      3.CM PQ: 0 ANSI: 5
[    4.705234] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    4.705477] sd 0:0:0:0: [sda] Write Protect is off
[    4.705610] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.705659] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.705981] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors: (250 GB/232 GiB)
[    4.706217] sd 0:0:0:0: [sda] Write Protect is off
[    4.706350] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    4.706397] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    4.706614]  sda: sda1 sda2 sda3
[    4.759219] sd 0:0:0:0: [sda] Attached SCSI disk
[    4.759848] Fusion MPT base driver 3.04.07
[    4.759978] Copyright (c) 1999-2008 LSI Corporation
[    4.760161] Fusion MPT SPI Host driver 3.04.07
[    4.761757] ieee1394: raw1394: /dev/raw1394 device initialized
[    4.762365] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    4.772701] serio: i8042 KBD port at 0x60,0x64 irq 1
[    4.772851] serio: i8042 AUX port at 0x60,0x64 irq 12
[    4.773502] mice: PS/2 mouse device common for all mice
[    4.814339] oprofile: using NMI interrupt.
[    4.815160] TCP cubic registered
[    4.815298] NET: Registered protocol family 17
[    4.817532] registered taskstats version 1
[    4.819404] input: AT Translated Set 2 keyboard as /class/input/input3
[    5.066396] elantech.c: unexpected magic knock result 0x00, 0x02, 0x64.
[    5.384927] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    5.403381] input: TPPS/2 IBM TrackPoint as /class/input/input4
[    5.505153] VFS: Mounted root (jfs filesystem) readonly.
[    5.505321] Freeing unused kernel memory: 336k freed
[   17.741795] input: PC Speaker as /class/input/input5
[   18.324065] usbcore: registered new interface driver usbfs
[   18.324192] usbcore: registered new interface driver hub
[   18.329521] usbcore: registered new device driver usb
[   18.351555] Non-volatile memory driver v1.2
[   18.449514] agpgart-intel 0000:00:00.0: Intel Mobile Intel? GM45 Express Chipset
[   18.450539] agpgart-intel 0000:00:00.0: detected 32764K stolen memory
[   18.453685] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[   18.558379] e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6
[   18.558497] e1000e: Copyright (c) 1999-2008 Intel Corporation.
[   18.558648] e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   18.558766] e1000e 0000:00:19.0: setting latency timer to 64
[   18.558861] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   18.629105] cfg80211: Calling CRDA to update world regulatory domain
[   18.647828] 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:09:46:11
[   18.648058] 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
[   18.648228] 0000:00:19.0: eth0: MAC: 6, PHY: 8, PBA No: 1008ff-0ff
[   18.714735] ACPI: WMI: Mapper loaded
[   18.748351] rtc_cmos 00:07: RTC can wake from S4
[   18.748651] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[   18.748827] rtc0: alarms up to one month, y3k, 114 bytes nvram, , hpet irqs irqs
[   18.817041] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   18.818103] ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
[   18.818263] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[   18.818468] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   18.818475] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   18.818707] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[   18.822859] ehci_hcd 0000:00:1a.7: debug port 1
[   18.823000] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[   18.823027] ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
[   18.836025] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   18.836401] usb usb1: configuration #1 chosen from 1 choice
[   18.836608] hub 1-0:1.0: USB hub found
[   18.836757] hub 1-0:1.0: 6 ports detected
[   18.837194] i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[   18.838222] ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
[   18.838378] ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[   18.838554] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   18.838561] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   18.838767] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[   18.842909] ehci_hcd 0000:00:1d.7: debug port 1
[   18.843069] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[   18.843098] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
[   18.856257] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   18.856651] usb usb2: configuration #1 chosen from 1 choice
[   18.856881] hub 2-0:1.0: USB hub found
[   18.857038] hub 2-0:1.0: 6 ports detected
[   18.861646] uhci_hcd: USB Universal Host Controller Interface driver
[   18.862564] uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
[   18.862718] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[   18.862873] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   18.862880] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   18.863090] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[   18.863376] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
[   18.863751] usb usb3: configuration #1 chosen from 1 choice
[   18.863956] hub 3-0:1.0: USB hub found
[   18.864130] hub 3-0:1.0: 2 ports detected
[   18.864493] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[   18.864641] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   18.864648] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   18.864866] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[   18.865131] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
[   18.865455] usb usb4: configuration #1 chosen from 1 choice
[   18.865672] hub 4-0:1.0: USB hub found
[   18.865815] hub 4-0:1.0: 2 ports detected
[   18.866976] uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
[   18.867124] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
[   18.867269] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[   18.867275] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[   18.867466] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[   18.867733] uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
[   18.868067] usb usb5: configuration #1 chosen from 1 choice
[   18.868270] hub 5-0:1.0: USB hub found
[   18.868413] hub 5-0:1.0: 2 ports detected
[   18.871784] uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
[   18.871927] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   18.872093] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   18.872100] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   18.872290] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[   18.872621] uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
[   18.872941] usb usb6: configuration #1 chosen from 1 choice
[   18.873157] hub 6-0:1.0: USB hub found
[   18.873303] hub 6-0:1.0: 2 ports detected
[   18.873669] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   18.873816] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   18.873823] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   18.874010] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[   18.874270] uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
[   18.874580] usb usb7: configuration #1 chosen from 1 choice
[   18.874787] hub 7-0:1.0: USB hub found
[   18.874927] hub 7-0:1.0: 2 ports detected
[   18.875309] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[   18.875466] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   18.875472] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   18.875663] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[   18.875925] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
[   18.876256] usb usb8: configuration #1 chosen from 1 choice
[   18.876456] hub 8-0:1.0: USB hub found
[   18.876596] hub 8-0:1.0: 2 ports detected
[   19.037369] acpi device:03: registered as cooling_device2
[   19.038183] input: Video Bus as /class/input/input6
[   19.073102] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[   19.076442] acpi device:0a: registered as cooling_device3
[   19.077140] input: Video Bus as /class/input/input7
[   19.113113] ACPI: Video Device [VID1] (multi-head: yes  rom: no  post: no)
[   19.214006] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
[   19.214173] iwlagn: Copyright(c) 2003-2008 Intel Corporation
[   19.214341] vendor=8086 device=2942
[   19.214443] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   19.214553] iwlagn 0000:03:00.0: setting latency timer to 64
[   19.214586] iwlagn: Detected Intel Wireless WiFi Link 5300AGN REV=0x24
[   19.248034] iwlagn: Tunable channels: 13 802.11bg, 24 802.11a channels
[   19.252638] thinkpad_acpi: ThinkPad ACPI Extras v0.21
[   19.252741] thinkpad_acpi: http://ibm-acpi.sf.net/
[   19.252842] thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
[   19.252947] thinkpad_acpi: Lenovo ThinkPad X200, model 7458AH8
[   19.253337] vendor=8086 device=2942
[   19.253445] iwlagn 0000:03:00.0: PCI INT A disabled
[   19.253823] phy0: Selected rate control algorithm 'iwl-agn-rs'
[   19.253921] thinkpad_acpi: radio switch found; radios are disabled
[   19.254140] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[   19.254310] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[   19.260018] usb 1-6: new high speed USB device using ehci_hcd and address 3
[   19.261363] Registered led device: tpacpi::thinklight
[   19.261516] Registered led device: tpacpi::power
[   19.261635] Registered led device: tpacpi:orange:batt
[   19.261753] Registered led device: tpacpi:green:batt
[   19.261868] Registered led device: tpacpi::dock_active
[   19.261983] Registered led device: tpacpi::bay_active
[   19.262098] Registered led device: tpacpi::dock_batt
[   19.262213] Registered led device: tpacpi::unknown_led
[   19.262330] Registered led device: tpacpi::standby
[   19.269391] thinkpad_acpi: Lenovo BIOS switched to ACPI backlight control mode
[   19.269559] thinkpad_acpi: standard ACPI backlight interface available, not loading native one...
[   19.270007] input: ThinkPad Extra Buttons as /class/input/input8
[   19.295617] HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[   19.295815] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   19.397435] usb 1-6: configuration #1 chosen from 1 choice
[   19.640084] usb 4-1: new full speed USB device using uhci_hcd and address 2
[   19.805453] usb 4-1: configuration #1 chosen from 1 choice
[   20.133091] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com
[   28.219377] alg: No test for stdrng (krng)
[   28.235014] alg: No test for stdrng (ansi_cprng)
[   65.301850] loop: module loaded
[   66.498773] Adding 4982032k swap on /dev/mapper/swap.  Priority:-1 extents:1 across:4982032k
[   68.852596] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   68.908323] e1000e 0000:00:19.0: irq 43 for MSI/MSI-X
[   73.485857] NET: Registered protocol family 10
[   73.487026] lo: Disabled Privacy Extensions
[   73.488315] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   76.088587] thinkpad_acpi: setting the hotkey mask to 0x00ffffff is likely not the best way to go about it
[   76.088813] thinkpad_acpi: please consider using the driver defaults, and refer to up-to-date thinkpad-acpi documentation
[   76.168584] input: /usr/sbin/thinkpad-keys as /class/input/input9
[   82.369240] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[   84.123509] Bluetooth: Core ver 2.13
[   84.123669] NET: Registered protocol family 31
[   84.125721] Bluetooth: HCI device and connection manager initialized
[   84.125840] Bluetooth: HCI socket layer initialized
[   84.142022] Bluetooth: L2CAP ver 2.11
[   84.142123] Bluetooth: L2CAP socket layer initialized
[   84.149638] Bluetooth: RFCOMM socket layer initialized
[   84.149750] Bluetooth: RFCOMM TTY layer initialized
[   84.149856] Bluetooth: RFCOMM ver 1.10
[   84.538500] vendor=8086 device=2942
[   84.538642] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[   84.538860] iwlagn 0000:03:00.0: restoring config space at offset 0x1 (was 0x100102, writing 0x100106)
[   84.538970] iwlagn 0000:03:00.0: irq 42 for MSI/MSI-X
[   84.539050] iwlagn 0000:03:00.0: firmware: requesting iwlwifi-5000-1.ucode
[   84.748853] iwlagn: Radio disabled by HW RF Kill switch
[   84.765997] ------------[ cut here ]------------
[   84.766145] WARNING: at net/mac80211/main.c:236 ieee80211_hw_config+0x71/0x79 [mac80211]()
[   84.766360] Modules linked in: rfcomm l2cap bluetooth uinput autofs4 ipv6 cpufreq_powersave md_mod loop sha256_generic ansi_cprng krng chainiv rng aes_x86_64 aes_generic cbc dm_crypt dm_mod arc4 ecb cryptomgr aead crypto_blkcipher snd_hda_intel snd_pcm iwlagn iwlcore thinkpad_acpi snd_page_alloc snd_hwdep snd_seq rfkill hwmon snd_timer snd_seq_device video backlight mac80211 uhci_hcd i2c_i801 ehci_hcd output led_class rtc_cmos rtc_core rtc_lib wmi snd i2c_core cfg80211 e1000e intel_agp nvram usbcore soundcore pcspkr
[   84.769696] Pid: 4050, comm: NetworkManager Not tainted 2.6.28-rc3-next-20081105-denkbrett #11
[   84.769912] Call Trace:
[   84.770049]  [<ffffffff802337f1>] warn_on_slowpath+0x51/0x75
[   84.770188]  [<ffffffff8046d200>] ip_mc_inc_group+0xdb/0x1d4
[   84.770327]  [<ffffffff8043f6ef>] rt_cache_flush+0x1f/0x100
[   84.770465]  [<ffffffff80433f1f>] qdisc_create_dflt+0x34/0x4a
[   84.770613]  [<ffffffffa0159342>] iwl4965_mac_config+0x219/0x236 [iwlagn]
[   84.770767]  [<ffffffffa00cf76e>] ieee80211_hw_config+0x71/0x79 [mac80211]
[   84.770923]  [<ffffffffa00daa6d>] ieee80211_open+0x5b5/0x6d1 [mac80211]
[   84.771062]  [<ffffffff8043c0dd>] __nla_reserve+0x1e/0x46
[   84.771199]  [<ffffffff80424c60>] dev_open+0x74/0xb0
[   84.771333]  [<ffffffff8042463a>] dev_change_flags+0xab/0x169
[   84.771470]  [<ffffffff8042bd63>] do_setlink+0x2b0/0x373
[   84.771607]  [<ffffffff8042cca3>] rtnetlink_rcv_msg+0x0/0x1eb
[   84.771743]  [<ffffffff8042bfbc>] rtnl_setlink+0x10b/0x10d
[   84.771880]  [<ffffffff8042cca3>] rtnetlink_rcv_msg+0x0/0x1eb
[   84.772017]  [<ffffffff8043bf39>] netlink_rcv_skb+0x34/0x7f
[   84.772164]  [<ffffffff8042cc9d>] rtnetlink_rcv+0x1f/0x25
[   84.772299]  [<ffffffff8043ba36>] netlink_unicast+0x203/0x274
[   84.772436]  [<ffffffff8041e469>] __alloc_skb+0x61/0x123
[   84.772571]  [<ffffffff8043bd12>] netlink_sendmsg+0x26b/0x27e
[   84.772707]  [<ffffffff80417acb>] sock_sendmsg+0xe2/0xff
[   84.772844]  [<ffffffff80245ed4>] autoremove_wake_function+0x0/0x2e
[   84.772982]  [<ffffffff80416bfd>] move_addr_to_kernel+0x25/0x36
[   84.773135]  [<ffffffff80417cff>] sys_sendmsg+0x217/0x28a
[   84.773270]  [<ffffffff8043adca>] netlink_insert+0xfe/0x121
[   84.773406]  [<ffffffff804186f5>] move_addr_to_user+0x41/0x58
[   84.773542]  [<ffffffff80418bb1>] sys_getsockname+0x7a/0xaa
[   84.773679]  [<ffffffff8020b3fb>] system_call_fastpath+0x16/0x1b
[   84.773814] ---[ end trace 673baf482615c06a ]---
[   84.774570] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 197 bytes --]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2008-11-05 19:15 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-11-05  7:43 linux-next: Tree for November 5 Stephen Rothwell
2008-11-05 17:24 ` Mac802.11/iwlagn call trace in " Nico -telmich- Schottelius

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).