From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754740AbYKFKX1 (ORCPT ); Thu, 6 Nov 2008 05:23:27 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1753452AbYKFKXS (ORCPT ); Thu, 6 Nov 2008 05:23:18 -0500 Received: from atrey.karlin.mff.cuni.cz ([195.113.26.193]:45132 "EHLO atrey.karlin.mff.cuni.cz" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753304AbYKFKXM (ORCPT ); Thu, 6 Nov 2008 05:23:12 -0500 Date: Thu, 6 Nov 2008 11:23:09 +0100 From: Pavel Machek To: kernel list , Andrew Morton Subject: 2.6.28-rc2-mm1: multiple BUG: scheduling while atomic: swapper, first in acpi_idle_enter_simple, then fbcon has problems Message-ID: <20081106102309.GA334@atrey.karlin.mff.cuni.cz> MIME-Version: 1.0 Content-Type: text/plain; charset=iso-8859-2 Content-Disposition: inline Content-Transfer-Encoding: 8bit User-Agent: Mutt/1.5.13 (2006-08-11) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org ...kernel contains experimental version of HP accelerometer driver and new HP acclerometer LED, but hopefully they are not causing this? BIOS EBDA/lowmem at: 0009fc00/0009fc00 Linux version 2.6.28-rc2-mm1 (pavel@amd) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Thu Nov 6 10:28:45 CET 2008 KERNEL supported cpus: Intel GenuineIntel AMD AuthenticAMD NSC Geode by NSC Cyrix CyrixInstead Centaur CentaurHauls Transmeta GenuineTMx86 Transmeta TransmetaCPU UMC UMC UMC UMC BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e3000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001beb0000 (usable) BIOS-e820: 000000001beb0000 - 000000001bebe000 (ACPI data) BIOS-e820: 000000001bebe000 - 000000001bef0000 (ACPI NVS) BIOS-e820: 000000001bef0000 - 000000001bf00000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fecc0000 - 00000000fecc1000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) DMI present. last_pfn = 0x1beb0 max_arch_pfn = 0x100000 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 kernel direct mapping tables up to 1beb0000 @ 7000-7b000 ACPI: RSDP 000F9EB0, 0024 (r2 HP ) ACPI: XSDT 1BEB0100, 0064 (r1 HP XSDT0956 20080402 MSFT 97) ACPI: FACP 1BEB0290, 00F4 (r4 HP FACP0956 20080402 MSFT 97) ACPI: DSDT 1BEB0600, 906B (r2 68VGU 68VGUF02 F02 INTL 20061109) ACPI: FACS 1BEBE000, 0040 ACPI: APIC 1BEB0390, 0060 (r2 HP APIC0956 20080402 MSFT 97) ACPI: MCFG 1BEB03F0, 003C (r1 HP OEMMCFG 20080402 MSFT 97) ACPI: SLIC 1BEB0430, 0176 (r1 HP SLIC0956 20080402 MSFT 97) ACPI: WDRT 1BEB05B0, 0047 (r1 HP VT-8237S 20080402 MSFT 97) ACPI: OEMB 1BEBE040, 00F0 (r1 HP OEMB0956 20080402 MSFT 97) ACPI: HPET 1BEB9670, 0038 (r1 HP VT-8237S 20080402 MSFT 97) ACPI: SSDT 1BEBE130, 03A0 (r1 HP P001PM 1 INTL 20051117) ACPI: DMI detected: Hewlett-Packard ACPI: Local APIC address 0xfee00000 0MB HIGHMEM available. 446MB LOWMEM available. mapped low ram: 0 - 1beb0000 low ram: 00000000 - 1beb0000 bootmap 00002000 - 000057d8 (8 early reservations) ==> bootmem [0000000000 - 001beb0000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] #3 [0000200000 - 0000eb4434] TEXT DATA BSS ==> [0000200000 - 0000eb4434] #4 [0000eb5000 - 0000ecb000] INIT_PG_TABLE ==> [0000eb5000 - 0000ecb000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000] #6 [0000007000 - 0000062000] PGTABLE ==> [0000007000 - 0000062000] #7 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000] found SMP MP-table at [c00ff780] 000ff780 sizeof(struct page) = 32 Zone PFN ranges: DMA 0x00000000 -> 0x00001000 Normal 0x00001000 -> 0x0001beb0 HighMem 0x0001beb0 -> 0x0001beb0 Movable zone start PFN for each node early_node_map[2] active PFN ranges 0: 0x00000000 -> 0x0000009f 0: 0x00000100 -> 0x0001beb0 On node 0 totalpages: 114255 Node 0 memmap at 0xc1001000 size 3670016 first pfn 0xc1001000 free_area_init_node: node 0, pgdat c0a09e00, node_mem_map c1001000 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3967 pages, LIFO batch:0 Normal zone: 862 pages used for memmap Normal zone: 109394 pages, LIFO batch:31 HighMem zone: 0 pages used for memmap Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x02] address[0xfecc0000] gsi_base[24]) IOAPIC[1]: apic_id 2, version 3, address 0xfecc0000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 2 I/O APICs ACPI: HPET id: 0x11068201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information SMP: Allowing 1 CPUs, 0 hotplug CPUs PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e3000 PM: Registered nosave memory: 00000000000e3000 - 0000000000100000 Allocating PCI resources starting at 20000000 (gap: 1bf00000:e2d00000) PERCPU: Allocating 32768 bytes of per cpu data NR_CPUS:2 nr_cpumask_bits:2 nr_cpu_ids:1 nr_node_ids:1 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 113361 Kernel command line: root=/dev/sda4 resume=/dev/sda1 psmouse.psmouse_proto=imps psmouse_proto=imps psmouse.proto=imps vga=791 init=/tmp/swsusp-init acpi_sleep=s3_bios,s3_mode no_console_suspend Unknown boot option `psmouse.psmouse_proto=imps': ignoring Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 2048 (order: 11, 8192 bytes) Extended CMOS year: 2000 TSC: PIT calibration matches PMTIMER. 1 loops Detected 997.504 MHz processor. Console: colour dummy device 80x25 console [tty0] enabled Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar ... MAX_LOCKDEP_SUBCLASSES: 8 ... MAX_LOCK_DEPTH: 48 ... MAX_LOCKDEP_KEYS: 8191 ... CLASSHASH_SIZE: 4096 ... MAX_LOCKDEP_ENTRIES: 8192 ... MAX_LOCKDEP_CHAINS: 16384 ... CHAINHASH_SIZE: 8192 memory used by lock dependency info: 2335 kB per task-struct memory footprint: 1152 bytes Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 439364k/457408k available (5633k kernel code, 17536k reserved, 2710k data, 384k init, 0k highmem) virtual kernel memory layout: fixmap : 0xfff83000 - 0xfffff000 ( 496 kB) pkmap : 0xff800000 - 0xffc00000 (4096 kB) vmalloc : 0xdc6b0000 - 0xff7fe000 ( 561 MB) lowmem : 0xc0000000 - 0xdbeb0000 ( 446 MB) .init : 0xc0a2f000 - 0xc0a8f000 ( 384 kB) .data : 0xc0780799 - 0xc0a260ac (2710 kB) .text : 0xc0200000 - 0xc0780799 (5633 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. hpet clockevent registered Calibrating delay loop (skipped), value calculated using timer frequency.. 1995.00 BogoMIPS (lpj=3990016) Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 128K (64 bytes/line) Checking 'hlt' instruction... OK. SMP alternatives: switching to UP code debug: unmapping init memory c0a2a000..c0a2f000 ACPI: Core revision 20080926 Parsing all Control Methods: Table [DSDT](id 0001) - 1009 Objects with 79 Devices 249 Methods 32 Regions Parsing all Control Methods: Table [SSDT](id 0002) - 11 Objects with 0 Devices 5 Methods 0 Regions tbxface-0596 [00] tb_load_namespace : ACPI Tables successfully acquired evxfevnt-0091 [00] enable : Transition to ACPI mode successful ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Centaur VIA C7-M Processor 1000MHz stepping 00 Brought up 1 CPUs Total of 1 processors activated (1995.00 BogoMIPS). CPU0 attaching NULL sched-domain. net_namespace: 568 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: Not using MMCONFIG. PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=7 PCI: Using configuration type 1 for base access evgpeblk-0957 [00] ev_create_gpe_block : GPE 00 to 0F [_GPE] 2 regs on int 0x9 evgpeblk-0957 [00] ev_create_gpe_block : GPE 10 to 2F [_GPE] 4 regs on int 0x9 ACPI: EC: Look up EC in DSDT Completing Region/Field/Buffer/Package initialization:............................................................................................................................................................. Initialized 30/32 Regions 39/39 Fields 51/53 Buffers 37/38 Packages (1029 nodes) Initializing Device/Processor/Thermal objects by executing _INI methods:... Executed 3 _INI methods requiring 1 _STA executions (examined 83 objects) evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 2 Wake, Enabled 0 Runtime GPEs in this block evgpeblk-1054 [00] ev_initialize_gpe_bloc: Found 0 Wake, Enabled 1 Runtime GPEs in this block ACPI: EC: non-query interrupt received, switching to interrupt mode ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 PCI: MCFG area at e0000000 reserved in ACPI motherboard resources PCI: Using MMCONFIG for extended config space ACPI: EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62 ACPI: EC: driver started in interrupt mode ACPI: No dock devices found. ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:00.0: reg 10 32bit mmio: [0xf0000000-0xf7ffffff] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold pci 0000:00:02.0: PME# disabled pci 0000:00:03.0: PME# supported from D0 D3hot D3cold pci 0000:00:03.0: PME# disabled pci 0000:00:0f.0: reg 10 io port: [0xcc00-0xcc07] pci 0000:00:0f.0: reg 14 io port: [0xc880-0xc883] pci 0000:00:0f.0: reg 18 io port: [0xc800-0xc807] pci 0000:00:0f.0: reg 1c io port: [0xc480-0xc483] pci 0000:00:0f.0: reg 20 io port: [0xc400-0xc40f] pci 0000:00:0f.0: reg 24 io port: [0xc000-0xc0ff] pci 0000:00:10.0: reg 20 io port: [0xb800-0xb81f] pci 0000:00:10.0: supports D1 D2 pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.0: PME# disabled pci 0000:00:10.2: reg 20 io port: [0xb880-0xb89f] pci 0000:00:10.2: supports D1 D2 pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.2: PME# disabled pci 0000:00:10.3: reg 20 io port: [0xbc00-0xbc1f] pci 0000:00:10.3: supports D1 D2 pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.3: PME# disabled pci 0000:00:10.4: reg 10 32bit mmio: [0xfbeffc00-0xfbeffcff] pci 0000:00:10.4: supports D1 D2 pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:00:10.4: PME# disabled pci 0000:01:00.0: reg 10 32bit mmio: [0xd8000000-0xdbffffff] pci 0000:01:00.0: reg 14 32bit mmio: [0xfc000000-0xfcffffff] pci 0000:01:00.0: reg 30 32bit mmio: [0xfbff0000-0xfbffffff] pci 0000:01:00.0: supports D1 D2 pci 0000:00:01.0: bridge 32bit mmio: [0xfbf00000-0xfcffffff] pci 0000:00:01.0: bridge 32bit mmio pref: [0xd8000000-0xdbffffff] pci 0000:02:00.0: reg 10 64bit mmio: [0xfdffc000-0xfdffffff] pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:02.0: bridge io port: [0xd000-0xdfff] pci 0000:00:02.0: bridge 32bit mmio: [0xfd000000-0xfdffffff] pci 0000:00:02.0: bridge 64bit mmio pref: [0xde000000-0xdfffffff] pci 0000:00:03.0: bridge io port: [0xe000-0xefff] pci 0000:00:03.0: bridge 32bit mmio: [0xfe000000-0xfe9fffff] pci 0000:00:03.0: bridge 64bit mmio pref: [0xf8000000-0xfaffffff] pci 0000:07:03.0: reg 10 32bit mmio: [0xfeaf0000-0xfeafffff] pci 0000:07:03.0: PME# supported from D3hot D3cold pci 0000:07:03.0: PME# disabled pci 0000:00:13.1: transparent bridge pci 0000:00:13.1: bridge 32bit mmio: [0xfea00000-0xfeafffff] bus 00 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBP0._PRT] ACPI: PCI Root Bridge [PCI1] (0000:80) pci 0000:80:01.0: reg 10 64bit mmio: [0xfebfc000-0xfebfffff] pci 0000:80:01.0: PME# supported from D0 D3hot D3cold pci 0000:80:01.0: PME# disabled bus 80 -> node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: Power Resource [APMF] (off) SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing Bluetooth: Core ver 2.13 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized cfg80211: Calling CRDA to update world regulatory domain cfg80211: Failed calling CRDA cfg80211: calling CRDA failed - unable to update world regulatory domain, using static definition Switched to NOHz mode on CPU #0 pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered system 00:05: ioport range 0x3e0-0x3e7 has been reserved system 00:05: ioport range 0x4d0-0x4d1 has been reserved system 00:05: ioport range 0x500-0x501 has been reserved system 00:05: ioport range 0x800-0x87f has been reserved system 00:05: ioport range 0x400-0x41f has been reserved system 00:05: iomem range 0xfecc0000-0xfecc0fff could not be reserved system 00:05: iomem range 0xfed02000-0xfed02fff has been reserved system 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved system 00:08: iomem range 0xfee00000-0xfee00fff could not be reserved system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved system 00:0c: iomem range 0x0-0x9ffff could not be reserved system 00:0c: iomem range 0xc0000-0xcffff could not be reserved system 00:0c: iomem range 0xe0000-0xfffff could not be reserved system 00:0c: iomem range 0x100000-0x1befffff could not be reserved system 00:0c: iomem range 0xfec00000-0xffffffff could not be reserved pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 pci 0000:00:01.0: IO window: disabled pci 0000:00:01.0: MEM window: 0xfbf00000-0xfcffffff pci 0000:00:01.0: PREFETCH window: 0x000000d8000000-0x000000dbffffff pci 0000:00:02.0: PCI bridge, secondary bus 0000:02 pci 0000:00:02.0: IO window: 0xd000-0xdfff pci 0000:00:02.0: MEM window: 0xfd000000-0xfdffffff pci 0000:00:02.0: PREFETCH window: 0x000000de000000-0x000000dfffffff pci 0000:00:03.0: PCI bridge, secondary bus 0000:05 pci 0000:00:03.0: IO window: 0xe000-0xefff pci 0000:00:03.0: MEM window: 0xfe000000-0xfe9fffff pci 0000:00:03.0: PREFETCH window: 0x000000f8000000-0x000000faffffff pci 0000:00:13.1: PCI bridge, secondary bus 0000:07 pci 0000:00:13.1: IO window: disabled pci 0000:00:13.1: MEM window: 0xfea00000-0xfeafffff pci 0000:00:13.1: PREFETCH window: disabled pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:02.0: PCI INT A -> GSI 27 (level, low) -> IRQ 27 pci 0000:00:02.0: setting latency timer to 64 pci 0000:00:03.0: PCI INT A -> GSI 31 (level, low) -> IRQ 31 pci 0000:00:03.0: setting latency timer to 64 pci 0000:00:13.1: setting latency timer to 64 bus: 00 index 0 io port: [0x00-0xffff] bus: 00 index 1 mmio: [0x000000-0xffffffff] bus: 01 index 0 mmio: [0x0-0x0] bus: 01 index 1 mmio: [0xfbf00000-0xfcffffff] bus: 01 index 2 mmio: [0xd8000000-0xdbffffff] bus: 01 index 3 mmio: [0x0-0x0] bus: 02 index 0 io port: [0xd000-0xdfff] bus: 02 index 1 mmio: [0xfd000000-0xfdffffff] bus: 02 index 2 mmio: [0xde000000-0xdfffffff] bus: 02 index 3 mmio: [0x0-0x0] bus: 05 index 0 io port: [0xe000-0xefff] bus: 05 index 1 mmio: [0xfe000000-0xfe9fffff] bus: 05 index 2 mmio: [0xf8000000-0xfaffffff] bus: 05 index 3 mmio: [0x0-0x0] bus: 07 index 0 mmio: [0x0-0x0] bus: 07 index 1 mmio: [0xfea00000-0xfeafffff] bus: 07 index 2 mmio: [0x0-0x0] bus: 07 index 3 io port: [0x00-0xffff] bus: 07 index 4 mmio: [0x000000-0xffffffff] bus: 80 index 0 io port: [0x00-0xffff] bus: 80 index 1 mmio: [0x000000-0xffffffff] NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 5, 131072 bytes) TCP bind hash table entries: 16384 (order: 7, 524288 bytes) TCP: Hash tables configured (established 16384 bind 16384) TCP reno registered NET: Registered protocol family 1 NTFS driver 2.1.29 [Flags: R/O DEBUG]. JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.10) msgmni has been set to 858 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered (default) io scheduler deadline registered io scheduler cfq registered PCI: VIA PCI bridge detected.Disabling DAC. pci 0000:00:10.0: uhci_check_and_reset_hc: legsup = 0x8030 pci 0000:00:10.0: Performing full reset pci 0000:00:10.2: uhci_check_and_reset_hc: legsup = 0x8030 pci 0000:00:10.2: Performing full reset pci 0000:00:10.3: uhci_check_and_reset_hc: legsup = 0x8030 pci 0000:00:10.3: Performing full reset pci 0000:01:00.0: Boot video device pcieport-driver 0000:00:02.0: setting latency timer to 64 pcieport-driver 0000:00:02.0: found MSI capability pci_express 0000:00:02.0:pcie00: allocate port service pci_express 0000:00:02.0:pcie01: allocate port service pci_express 0000:00:02.0:pcie02: allocate port service pci_express 0000:00:02.0:pcie03: allocate port service pcieport-driver 0000:00:03.0: setting latency timer to 64 pcieport-driver 0000:00:03.0: found MSI capability pci_express 0000:00:03.0:pcie00: allocate port service pci_express 0000:00:03.0:pcie01: allocate port service pci_express 0000:00:03.0:pcie02: allocate port service pci_express 0000:00:03.0:pcie03: allocate port service aer 0000:00:02.0:pcie01: AER service couldn't init device: no _OSC support aer 0000:00:03.0:pcie01: AER service couldn't init device: no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed vesafb: framebuffer at 0xd8000000, mapped to 0xdc780000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=20 vesafb: protected mode interface info at c000:819f vesafb: pmi: set display start = c00c81ed, set palette = c00c8282 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 Console: switching to colour frame buffer device 102x42 fb0: VESA VGA frame buffer device ACPI: AC Adapter [AC0] (on-line) ACPI: Battery Slot [BAT1] (battery present) input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0A03:00/PNP0C0D:00/input/input1 ACPI: Lid Switch [LID] input: Sleep Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2 ACPI: Sleep Button (CM) [SLPB] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 ACPI: Power Button (CM) [PWRB] acpi device:0a: registered as cooling_device0 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:08/device:09/input/input4 ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) processor ACPI0007:00: registered as cooling_device1 ACPI: Processor [P001] (supports 16 throttling states) thermal LNXTHERM:01: registered as thermal_zone0 ACPI: Thermal Zone [THRM] (56 C) lp: driver loaded but no devices found Non-volatile memory driver v1.2 VIA RNG detected cs5535_gpio: DIVIL not found Linux agpgart interface v0.103 agpgart: Detected VIA P4M900 chipset agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000 [drm] Initialized drm 1.1.0 20060810 intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/945GME/965G/965GM chipsets intelfb: Version 0.9.6 Serial: 8250/16550 driver4 ports, IRQ sharing disabled floppy0: no floppy controllers found loop: module loaded e1000e: Intel(R) PRO/1000 Network Driver - 0.3.3.3-k6 e1000e: Copyright (c) 1999-2008 Intel Corporation. pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI e100: Copyright(c) 1999-2006 Intel Corporation tg3.c:v3.94 (August 14, 2008) tg3 0000:07:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 tg3 0000:07:03.0: firmware: using built-in firmware tigon/tg3_tso5.bin eth0: Tigon3 [partno(BCM95788) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:1f:29:86:4c:5d eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1] eth0: dma_rwctrl[763f0000] dma_mask[32-bit] PPP generic driver version 2.4.2 PPP Deflate Compression module registered PPP BSD Compression module registered SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256). CSLIP: code copyright 1989 Regents of the University of California. tun: Universal TUN/TAP device driver, 1.6 tun: (C) 1999-2004 Max Krasnyansky usbcore: registered new interface driver catc catc: v2.8:CATC EL1210A NetMate USB Ethernet driver usbcore: registered new interface driver asix usbcore: registered new interface driver cdc_ether usbcore: registered new interface driver net1080 usbcore: registered new interface driver cdc_subset usbcore: registered new interface driver zaurus Broadcom 43xx driver loaded [ Features: PLR, Firmware-ID: FW13 ] usbcore: registered new interface driver zd1211rw usbcore: registered new interface driver zd1201 iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.26kds iwl3945: Copyright(c) 2003-2008 Intel Corporation Linux video capture interface: v2.00 Uniform Multi-Platform E-IDE driver ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports Probing IDE interface ide0... ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... ide1 at 0x170-0x177,0x376 on irq 15 ide-gd driver 1.18 ide-cd driver 5.00 Driver 'sd' needs updating - please use bus_type methods Driver 'sr' needs updating - please use bus_type methods sata_via 0000:00:0f.0: version 2.3 sata_via 0000:00:0f.0: power state changed by ACPI to D0 sata_via 0000:00:0f.0: PCI INT B -> GSI 21 (level, low) -> IRQ 21 sata_via 0000:00:0f.0: routed to hard irq line 5 scsi0 : sata_via scsi1 : sata_via ata1: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 21 ata2: SATA max UDMA/133 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 21 ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-4: SMI MODEL, 20080308, max UDMA/66 ata1.00: 7831152 sectors, multi 0: LBA ata1.00: applying bridge limits ata1.00: configured for UDMA/66 ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA SMI MODEL 2008 PQ: 0 ANSI: 5 sd 0:0:0:0: [sda] 7831152 512-byte hardware sectors: (4.00 GB/3.73 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 7831152 512-byte hardware sectors: (4.00 GB/3.73 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA sda: sda4 sd 0:0:0:0: [sda] Attached SCSI disk sd 0:0:0:0: Attached scsi generic sg0 type 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 ehci_hcd 0000:00:10.4: PCI INT C -> GSI 21 (level, low) -> IRQ 21 ehci_hcd 0000:00:10.4: EHCI Host Controller drivers/usb/core/inode.c: creating file 'devices' drivers/usb/core/inode.c: creating file '001' ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:10.4: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 ehci_hcd 0000:00:10.4: reset hcc_params 6872 thresh 7 uframes 256/512/1024 ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:10.4: debug port 1 ehci_hcd 0000:00:10.4: MWI active ehci_hcd 0000:00:10.4: supports USB remote wakeup ehci_hcd 0000:00:10.4: irq 21, io mem 0xfbeffc00 ehci_hcd 0000:00:10.4: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:10.4: init command 010009 (park)=0 ithresh=1 period=256 RUN ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00 usb usb1: default language 0x0409 usb usb1: uevent usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: uevent hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.28-rc2-mm1 ehci_hcd usb usb1: SerialNumber: 0000:00:10.4 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 64 td 64 uhci_hcd: USB Universal Host Controller Interface driver uhci_hcd 0000:00:10.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 uhci_hcd 0000:00:10.0: UHCI Host Controller ehci_hcd 0000:00:10.4: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 2: status 0501 change 0001 ehci_hcd 0000:00:10.4: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT hub 1-0:1.0: port 6: status 0501 change 0001 drivers/usb/core/inode.c: creating file '002' uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.0: detected 2 ports uhci_hcd 0000:00:10.0: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.0: Performing full reset uhci_hcd 0000:00:10.0: supports USB remote wakeup uhci_hcd 0000:00:10.0: irq 20, io base 0x0000b800 usb usb2: default language 0x0409 usb usb2: uevent usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: adding 2-0:1.0 (config #1, interface 0) usb 2-0:1.0: uevent hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.28-rc2-mm1 uhci_hcd usb usb2: SerialNumber: 0000:00:10.0 uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.0: port 1 portsc 008a,00 uhci_hcd 0000:00:10.0: port 2 portsc 009a,00 hub 1-0:1.0: state 7 ports 8 chg 0044 evt 0000 hub 1-0:1.0: port 2, status 0501, change 0000, 480 Mb/s drivers/usb/core/inode.c: creating file '003' uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: detected 2 ports uhci_hcd 0000:00:10.2: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.2: Performing full reset uhci_hcd 0000:00:10.2: supports USB remote wakeup uhci_hcd 0000:00:10.2: irq 21, io base 0x0000b880 usb usb3: default language 0x0409 usb usb3: uevent usb usb3: usb_probe_device usb usb3: configuration #1 chosen from 1 choice usb usb3: adding 3-0:1.0 (config #1, interface 0) usb 3-0:1.0: uevent ehci_hcd 0000:00:10.4: port 2 full speed --> companion ehci_hcd 0000:00:10.4: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT hub 1-0:1.0: port 2 not reset yet, waiting 50ms hub 3-0:1.0: usb_probe_interface hub 3-0:1.0: usb_probe_interface - got id hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected hub 3-0:1.0: standalone hub hub 3-0:1.0: no power switching (usb 1.0) hub 3-0:1.0: individual port over-current protection hub 3-0:1.0: power on to power good time: 2ms hub 3-0:1.0: local power source is good hub 3-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.28-rc2-mm1 uhci_hcd usb usb3: SerialNumber: 0000:00:10.2 uhci_hcd 0000:00:10.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23 uhci_hcd 0000:00:10.3: UHCI Host Controller ehci_hcd 0000:00:10.4: GetStatus port 2 status 003802 POWER OWNER sig=j CSC hub 1-0:1.0: port 6, status 0501, change 0000, 480 Mb/s drivers/usb/core/inode.c: creating file '004' uhci_hcd 0000:00:10.2: port 1 portsc 008a,00 uhci_hcd 0000:00:10.2: port 2 portsc 008a,00 uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:10.3: detected 2 ports uhci_hcd 0000:00:10.3: uhci_check_and_reset_hc: cmd = 0x0000 uhci_hcd 0000:00:10.3: Performing full reset uhci_hcd 0000:00:10.3: supports USB remote wakeup uhci_hcd 0000:00:10.3: irq 23, io base 0x0000bc00 usb usb4: default language 0x0409 usb usb4: uevent usb usb4: usb_probe_device usb usb4: configuration #1 chosen from 1 choice usb usb4: adding 4-0:1.0 (config #1, interface 0) usb 4-0:1.0: uevent ehci_hcd 0000:00:10.4: port 6 high speed ehci_hcd 0000:00:10.4: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT hub 4-0:1.0: usb_probe_interface hub 4-0:1.0: usb_probe_interface - got id hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected hub 4-0:1.0: standalone hub hub 4-0:1.0: no power switching (usb 1.0) hub 4-0:1.0: individual port over-current protection hub 4-0:1.0: power on to power good time: 2ms hub 4-0:1.0: local power source is good hub 4-0:1.0: trying to enable port power on non-switchable hub drivers/usb/core/inode.c: creating file '001' usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.28-rc2-mm1 uhci_hcd usb usb4: SerialNumber: 0000:00:10.3 usb 1-6: new high speed USB device using ehci_hcd and address 3 usbcore: registered new interface driver cdc_acm cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters uhci_hcd 0000:00:10.3: port 1 portsc 008a,00 uhci_hcd 0000:00:10.3: port 2 portsc 008a,00 usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... ehci_hcd 0000:00:10.4: port 6 high speed ehci_hcd 0000:00:10.4: GetStatus port 6 status 001005 POWER sig=se0 PE CONNECT usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver usbserial USB Serial support registered for generic usb 1-6: default language 0x0409 usb 1-6: uevent usb 1-6: usb_probe_device usb 1-6: configuration #1 chosen from 1 choice usb 1-6: adding 1-6:1.0 (config #1, interface 0) usb 1-6:1.0: uevent usb-storage 1-6:1.0: usb_probe_interface usb-storage 1-6:1.0: usb_probe_interface - got id scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning drivers/usb/core/inode.c: creating file '003' usb 1-6: New USB device found, idVendor=058f, idProduct=6366 usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-6: Product: Mass Storage Device usb 1-6: Manufacturer: Generic usb 1-6: SerialNumber: 058F0O1111B1 hub 1-0:1.0: state 7 ports 8 chg 0000 evt 0004 usbcore: registered new interface driver usbserial_generic usbserial: USB Serial Driver core hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 uhci_hcd 0000:00:10.0: port 2 portsc 0093,00 hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 i8042.c: Detected active multiplexing controller, rev 1.1. serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: PC Speaker as /devices/platform/pcspkr/input/input5 rtc_cmos 00:07: RTC can wake from S4 rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 114 bytes nvram, , hpet irqs irqs hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@redhat.com Bluetooth: HCI UART driver ver 2.2 Bluetooth: HCI H4 protocol initialized Bluetooth: HCI BCSP protocol initialized Bluetooth: Generic Bluetooth USB driver ver 0.3 usbcore: registered new interface driver btusb EDAC MC: Ver: 2.1.0 Nov 6 2008 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6 usb 2-2: new full speed USB device using uhci_hcd and address 2 cpuidle: using governor ladder cpuidle: using governor menu sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman ricoh-mmc: Ricoh MMC Controller disabling driver ricoh-mmc: Copyright(c) Philip Langdale wbsd: Winbond W83L51xD SD/MMC card interface driver wbsd: Copyright(c) Pierre Ossman Registered led device: hp:red:hddprotection leds-hp-disk driver loaded. usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.18rc3. Marking TSC unstable due to TSC halts in idle usb 2-2: uevent usb 2-2: usb_probe_device usb 2-2: configuration #1 chosen from 1 choice usb 2-2: adding 2-2:1.0 (config #1, interface 0) usb 2-2:1.0: uevent usbserial_generic 2-2:1.0: usb_probe_interface usbserial_generic 2-2:1.0: usb_probe_interface - got id btusb 2-2:1.0: usb_probe_interface btusb 2-2:1.0: usb_probe_interface - got id usb 2-2: adding 2-2:1.1 (config #1, interface 1) usb 2-2:1.1: uevent drivers/usb/core/inode.c: creating file '002' usb 2-2: New USB device found, idVendor=0a12, idProduct=0001 usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0000 hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 HDA Intel 0000:80:01.0: power state changed by ACPI to D0 HDA Intel 0000:80:01.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 usb usb3: suspend_rh (auto-stop) HDA Intel 0000:80:01.0: setting latency timer to 64 HDA Intel 0000:80:01.0: PCI: Disallowing DAC for device usb usb4: suspend_rh (auto-stop) usbcore: registered new interface driver snd-usb-audio Clocksource tsc unstable (delta = -348924508 ns) ALSA device list: #0: HDA VIA VT82xx at 0xfebfc000 irq 17 nf_conntrack version 0.5.0 (7147 buckets, 28588 max) ip_tables: (C) 2000-2006 Netfilter Core Team TCP cubic registered NET: Registered protocol family 17 Bluetooth: L2CAP ver 2.11 Bluetooth: L2CAP socket layer initialized Bluetooth: SCO (Voice Link) ver 0.6 Bluetooth: SCO socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.10 Bluetooth: BNEP (Ethernet Emulation) ver 1.3 Bluetooth: BNEP filters: protocol multicast Bluetooth: HIDP (Human Interface Emulation) ver 1.2 RPC: Registered udp transport module. RPC: Registered tcp transport module. ieee80211: 802.11 data/management/control stack, git-1.1.13 ieee80211: Copyright (C) 2004-2005 Intel Corporation ieee80211_crypt: registered algorithm 'NULL' ieee80211_crypt: registered algorithm 'WEP' Using IPI No-Shortcut mode PM: Resume from partition /dev/sda1 PM: Checking hibernation image. PM: Error -6 checking image file PM: Resume from disk failed. input: PS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input7 md: Skipping autodetection of RAID arrays. (raid=autodetect will force) EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. hub 3-0:1.0: hub_suspend usb usb3: bus auto-suspend usb usb3: suspend_rh hub 4-0:1.0: hub_suspend usb usb4: bus auto-suspend usb usb4: suspend_rh scsi 2:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0 sd 2:0:0:0: [sdb] 63700992 512-byte hardware sectors: (32.6 GB/30.3 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sd 2:0:0:0: [sdb] 63700992 512-byte hardware sectors: (32.6 GB/30.3 GiB) sd 2:0:0:0: [sdb] Write Protect is off sd 2:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 2:0:0:0: [sdb] Assuming drive cache: write through sdb: sdb1 sd 2:0:0:0: [sdb] Attached SCSI removable disk sd 2:0:0:0: Attached scsi generic sg1 type 0 usb-storage: device scan complete kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. debug: unmapping init memory c0a2f000..c0a8f000 Write protecting the kernel text: 5636k Write protecting the kernel read-only data: 2096k Failed to execute /tmp/swsusp-init. Attempting defaults... BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000292 CPU: 0 EIP is at acpi_idle_enter_simple+0x180/0x1ed EAX: c0a29fb0 EBX: 00000267 ECX: 00000003 EDX: 008fe000 ESI: 00000000 EDI: 00624c8c EBP: 00624a25 ESP: c0a29fb0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7f167b0 CR3: 1afd9000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 EXT3 FS on sda4, internal journal BUG: scheduling while atomic: sss/1538/0x10000100 1 lock held by sss/1538: #0: (&tty->atomic_write_lock){....}, at: [] tty_write_lock+0x19/0x50 Modules linked in: Pid: 1538, comm: sss Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000246 CPU: 0 EIP is at fb_pad_unaligned_buffer+0xa6/0xf0 EAX: 00000000 EBX: 00000001 ECX: db166a3f EDX: 00000000 ESI: 00000001 EDI: c07a64c1 EBP: db166a3f ESP: da00bbe8 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 080fb408 CR3: 1affb000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? bit_putcs+0x538/0x620 [] ? soft_cursor+0x189/0x1f0 [] ? soft_cursor+0x189/0x1f0 [] ? fbcon_putcs+0x18e/0x2d0 [] ? bit_putcs+0x0/0x620 [] ? fbcon_redraw+0x139/0x1a0 [] ? fbcon_scroll+0x1c0/0xe80 [] ? scrup+0xe1/0xf0 [] ? lf+0x47/0x50 [] ? do_con_write+0x887/0x1a60 [] ? bump_cpu_timer+0xf0/0x1e0 [] ? __lock_acquire+0x230/0xa10 [] ? con_put_char+0x29/0x40 [] ? tty_put_char+0x16/0x40 [] ? __reacquire_kernel_lock+0xa/0x30 [] ? opost+0xa9/0x210 [] ? n_tty_write+0x111/0x340 [] ? default_wake_function+0x0/0x10 [] ? tty_write+0x142/0x1f0 [] ? n_tty_write+0x0/0x340 [] ? redirected_tty_write+0x7b/0xa0 [] ? vfs_write+0xa3/0x140 [] ? redirected_tty_write+0x0/0xa0 [] ? sys_write+0x41/0x70 [] ? syscall_call+0x7/0xb BUG: scheduling while atomic: ifconfig/1613/0x10000101 1 lock held by ifconfig/1613: #0: (rtnl_mutex){....}, at: [] devinet_ioctl+0xfa/0x6b0 Modules linked in: Pid: 1613, comm: ifconfig Not tainted 2.6.28-rc2-mm1 #1 Call Trace: [] schedule+0x80a/0x900 [] cache_free_debugcheck+0xe6/0x2e0 [] acpi_ut_update_ref_count+0x52/0x160 [] acpi_ps_pop_scope+0x70/0x78 [] __cond_resched+0x16/0x40 [] _cond_resched+0x28/0x30 [] acpi_ps_complete_op+0x1c6/0x1cd [] acpi_ps_parse_loop+0x674/0x80b [] acpi_ps_parse_aml+0xa7/0x314 [] acpi_ps_execute_method+0x12b/0x1f7 [] acpi_ns_evaluate+0x198/0x2bc [] acpi_evaluate_object+0x174/0x28d [] kmem_cache_alloc+0x9a/0xc0 [] acpi_evaluate_integer+0x7c/0x104 [] hpled_set+0x4c/0x60 [] led_heartbeat_function+0x56/0xe0 [] run_timer_softirq+0x156/0x1c0 [] led_heartbeat_function+0x0/0xe0 [] led_heartbeat_function+0x0/0xe0 [] __do_softirq+0x87/0x150 [] dma_generic_alloc_coherent+0x0/0xc0 [] do_softirq+0x37/0x40 [] local_bh_enable_ip+0x7d/0x90 [] tg3_open+0x682/0x9b0 [] dev_open+0x56/0xb0 [] _spin_unlock_bh+0x1b/0x30 [] dev_change_flags+0x80/0x190 [] devinet_ioctl+0x55f/0x6b0 [] sock_ioctl+0xcf/0x250 [] sock_ioctl+0x0/0x250 [] vfs_ioctl+0x2b/0x90 [] do_vfs_ioctl+0x1fb/0x580 [] down_read_trylock+0x56/0x60 [] do_page_fault+0x358/0x690 [] sys_ioctl+0x3d/0x70 [] syscall_call+0x7/0xb BUG: scheduling while atomic: postconf/1680/0x10000102 1 lock held by postconf/1680: #0: (&mm->mmap_sem){....}, at: [] do_page_fault+0x8e/0x690 Modules linked in: Pid: 1680, comm: postconf Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00010286 CPU: 0 EIP is at __do_fault+0x258/0x3c0 EAX: d8d4a000 EBX: c131b940 ECX: 000000de EDX: 00000009 ESI: d8c73c88 EDI: d8d4ac88 EBP: da2b7b38 ESP: da2d5edc DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7fc9140 CR3: 1a2e5000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? __lock_acquire+0x230/0xa10 [] ? handle_mm_fault+0xfd/0x5e0 [] ? down_read_trylock+0x56/0x60 [] ? do_page_fault+0x358/0x690 [] ? up_write+0x14/0x30 [] ? sys_mprotect+0x100/0x1c0 [] ? do_page_fault+0x0/0x690 [] ? error_code+0x72/0x78 BUG: scheduling while atomic: sh/1663/0x10000100 no locks held by sh/1663. Modules linked in: Pid: 1663, comm: sh Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0073:[] EFLAGS: 00000246 CPU: 0 EIP is at 0xb7df8dae EAX: 00000024 EBX: b7f15ff4 ECX: 0810380e EDX: 0810380e ESI: 00000000 EDI: bf87e14c EBP: bf87e0ec ESP: bf87e090 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b CR0: 8005003b CR2: 08116108 CR3: 1a2c7000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. coda_read_super: Bad mount data coda_read_super: device index: 0 coda_read_super: No pseudo device BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000292 CPU: 0 EIP is at acpi_idle_enter_bm+0x297/0x302 EAX: c0a29fac EBX: 0003eaf3 ECX: 00000006 EDX: 008fe000 ESI: 00000000 EDI: 00918b2e EBP: 008da03b ESP: c0a29fac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: 08055f74 CR3: 00a8f000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 BUG: scheduling while atomic: mount/1738/0x10000100 2 locks held by mount/1738: #0: (&type->s_umount_key#14){....}, at: [] sget+0x1e6/0x360 #1: (&inode->i_data.private_lock){....}, at: [] __find_get_block_slow+0x5c/0x140 Modules linked in: Pid: 1738, comm: mount Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000202 CPU: 0 EIP is at __find_get_block_slow+0xa3/0x140 EAX: 000088b3 EBX: d93ae4f8 ECX: 00000001 EDX: 0000b501 ESI: 000088b3 EDI: 00000000 EBP: 00000001 ESP: da3f5c48 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7e68600 CR3: 1a3f2000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? __find_get_block+0x9d/0x190 [] ? __find_get_block_slow+0x7a/0x140 [] ? ext3_bmap+0x0/0x90 [] ? __getblk+0x23/0x2f0 [] ? bmap+0x2e/0x40 [] ? __lock_acquire+0x230/0xa10 [] ? jread+0x8f/0x230 [] ? __set_page_dirty+0xcd/0x120 [] ? do_one_pass+0x2b8/0x440 [] ? __wait_on_bit+0x59/0x70 [] ? journal_recover+0xa2/0xe0 [] ? journal_load+0x38/0xa0 [] ? ext3_fill_super+0xf8d/0x17f0 [] ? snprintf+0x1f/0x30 [] ? disk_name+0x8a/0xc0 [] ? get_sb_bdev+0x12c/0x160 [] ? alloc_vfsmnt+0x0/0xf0 [] ? kstrdup+0x39/0x70 [] ? ext3_get_sb+0x20/0x30 [] ? ext3_fill_super+0x0/0x17f0 [] ? vfs_kern_mount+0x43/0x90 [] ? do_kern_mount+0x3d/0xe0 [] ? do_mount+0x4be/0x6c0 [] ? copy_mount_options+0x40/0x150 [] ? sys_mount+0x77/0xc0 [] ? syscall_call+0x7/0xb BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000292 CPU: 0 EIP is at acpi_idle_enter_bm+0x297/0x302 EAX: c0a29fac EBX: 00001f66 ECX: 00000008 EDX: 008fe000 ESI: 00000000 EDI: 00f98719 EBP: 00f967b3 ESP: c0a29fac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7eef000 CR3: 00a8f000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000292 CPU: 0 EIP is at acpi_idle_enter_bm+0x297/0x302 EAX: c0a29fac EBX: 00001f66 ECX: 00000008 EDX: 008fe000 ESI: 00000000 EDI: 00f98719 EBP: 00f967b3 ESP: c0a29fac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7eef000 CR3: 00a8f000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000296 CPU: 0 EIP is at acpi_idle_enter_simple+0x180/0x1ed EAX: c0a29f90 EBX: 00027545 ECX: 00000009 EDX: 008fe000 ESI: 00000000 EDI: 00acfc38 EBP: 00aa86f3 ESP: c0a29f90 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7eef000 CR3: 00a8f000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? acpi_idle_enter_bm+0xcd/0x302 [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000296 CPU: 0 EIP is at acpi_idle_enter_simple+0x180/0x1ed EAX: c0a29f90 EBX: 00027545 ECX: 00000009 EDX: 008fe000 ESI: 00000000 EDI: 00acfc38 EBP: 00aa86f3 ESP: c0a29f90 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7eef000 CR3: 00a8f000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? acpi_idle_enter_bm+0xcd/0x302 [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 BUG: scheduling while atomic: syslogd/1579/0x10000100 1 lock held by syslogd/1579: #0: (&u->readlock){....}, at: [] unix_dgram_recvmsg+0x68/0x250 Modules linked in: Pid: 1579, comm: syslogd Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000286 CPU: 0 EIP is at _spin_unlock_irqrestore+0x2b/0x40 EAX: 00000000 EBX: da001f24 ECX: 00000001 EDX: 00007c7b ESI: 00000286 EDI: da001f24 EBP: da006d08 ESP: da001d74 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: b7eef000 CR3: 1b98d000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? unix_dgram_recvmsg+0xa0/0x250 [] ? sock_recvmsg+0xe7/0x120 [] ? autoremove_wake_function+0x0/0x50 [] ? core_sys_select+0x233/0x320 [] ? sockfd_lookup_light+0x32/0x60 [] ? sys_recvfrom+0xd0/0x160 [] ? __lock_acquire+0x230/0xa10 [] ? do_readv_writev+0x122/0x190 [] ? sys_recv+0x37/0x40 [] ? sys_socketcall+0x16d/0x290 [] ? sys_select+0x40/0xb0 [] ? syscall_exit+0x8/0x1a [] ? syscall_call+0x7/0xb kjournald starting. Commit interval 5 seconds EXT3-fs warning: maximal mount count reached, running e2fsck is recommended EXT3 FS on sdb1, internal journal EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. BUG: scheduling while atomic: swapper/0/0x10000100 no locks held by swapper/0. Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.28-rc2-mm1 #1) HP 2133 EIP: 0060:[] EFLAGS: 00000292 CPU: 0 EIP is at acpi_idle_enter_bm+0x297/0x302 EAX: c0a29fac EBX: 000036cf ECX: 0000000b EDX: 008fe000 ESI: 00000000 EDI: 00687d3b EBP: 0068466c ESP: c0a29fac DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 CR0: 8005003b CR2: b7ef3124 CR3: 00a8f000 CR4: 00000690 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: ffff0ff0 DR7: 00000400 Call Trace: [] ? cpuidle_idle_call+0x66/0xc0 [] ? cpu_idle+0x52/0xa0 -- (english) http://www.livejournal.com/~pavelmachek (cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html