LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* 2.6.28-rc4: BUG: spinlock lockup on CPU#0
@ 2008-11-11 23:32 Alexander Beregalov
2008-11-11 23:49 ` David Miller
0 siblings, 1 reply; 4+ messages in thread
From: Alexander Beregalov @ 2008-11-11 23:32 UTC (permalink / raw)
To: linux-kernel, davem, sparclinux, kernel-testers, rjw
Hi
It is on sparc64 (Ultra 10). 2.6.28-rc4-00011-g3ad4f59
BUG: spinlock lockup on CPU#0, metalog/1322, 00000000007f1430
Kernel panic - not syncing: Aiee, killing interrupt handler!
It seems Sysrq does not work.
David, how can I provide more info before I reboot it ?
Full dmesg:
[ 0.000000] PROMLIB: Sun IEEE Boot Prom 'OBP 3.27.0 2000/08/23 15:45'
[ 0.000000] PROMLIB: Root node compatible:
[ 0.000000] Linux version 2.6.28-rc4-00011-g3ad4f59 (fireball@cygnus) (gcc version 4.2.4 (Gentoo 4.2.4 p1.0)) #6 PREEMPT Tue Nov 11 03:16:19 MSK 2008
[ 0.000000] console [earlyprom0] enabled
[ 0.000000] ARCH: SUN4U
[ 0.000000] Ethernet address: 08:00:20:f5:ba:1d
[ 0.000000] Kernel: Using 3 locked TLB entries for main kernel image.
[ 0.000000] Remapping the kernel... done.
[ 0.000000] OF stdout device is: /pci@1f,0/pci@1,1/SUNW,m64B@2
[ 0.000000] PROM: Built device tree with 43896 bytes of memory.
[ 0.000000] Top of RAM: 0x3ff46000, Total RAM: 0x3ff34000
[ 0.000000] Memory hole size: 0MB
[ 0.000000] [0000000200000000-fffff80001000000] page_structs=131072 node=0 entry=0/0
[ 0.000000] [0000000200000000-fffff80001400000] page_structs=131072 node=0 entry=1/0
[ 0.000000] Allocated 1056768 bytes for kernel page tables.
[ 0.000000] Zone PFN ranges:
[ 0.000000] Normal 0x00000000 -> 0x0001ffa3
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0001ff7f
[ 0.000000] 0: 0x0001ff80 -> 0x0001ff97
[ 0.000000] 0: 0x0001ff9f -> 0x0001ffa3
[ 0.000000] Booting Linux...
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129946
[ 0.000000] Kernel command line: root=/dev/sda2 netconsole=@192.168.1.5/eth1,6667@192.168.1.3/00:08:c7:da:88:fb
[ 0.000000] Preemptible RCU implementation.
[ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes)
[ 0.000000] clocksource: mult[245d1] shift[16]
[ 0.000000] clockevent: mult[70a3d70a] shift[32]
[ 20.820092] Console: colour dummy device 80x25
[ 20.920473] console handover: boot [earlyprom0] -> real [tty0]
[ 21.029396] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[ 21.029516] ... MAX_LOCKDEP_SUBCLASSES: 8
[ 21.029581] ... MAX_LOCK_DEPTH: 48
[ 21.029644] ... MAX_LOCKDEP_KEYS: 8191
[ 21.029710] ... CLASSHASH_SIZE: 4096
[ 21.029776] ... MAX_LOCKDEP_ENTRIES: 8192
[ 21.029842] ... MAX_LOCKDEP_CHAINS: 16384
[ 21.029908] ... CHAINHASH_SIZE: 8192
[ 21.029975] memory used by lock dependency info: 3839 kB
[ 21.030052] per task-struct memory footprint: 1920 bytes
[ 21.030129] ------------------------
[ 21.030185] | Locking API testsuite:
[ 21.030243] ----------------------------------------------------------------------------
[ 21.030354] | spin |wlock |rlock |mutex | wsem | rsem |
[ 21.030467] --------------------------------------------------------------------------
[ 21.030620] A-A deadlock: ok | ok | ok | ok | ok | ok |
[ 21.056564] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
[ 21.081869] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
[ 21.107377] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
[ 21.132867] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 21.158603] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 21.184318] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok |
[ 21.210082] double unlock: ok | ok | ok | ok | ok | ok |
[ 21.235279] initialize held: ok | ok | ok | ok | ok | ok |
[ 21.260474] bad unlock order: ok | ok | ok | ok | ok | ok |
[ 21.285859] --------------------------------------------------------------------------
[ 21.286009] recursive read-lock: | ok | | ok |
[ 21.294539] recursive read-lock #2: | ok | | ok |
[ 21.303071] mixed read-write-lock: | ok | | ok |
[ 21.311616] mixed write-read-lock: | ok | | ok |
[ 21.320169] --------------------------------------------------------------------------
[ 21.320321] hard-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 21.332968] soft-irqs-on + irq-safe-A/12: ok | ok | ok |
[ 21.345631] hard-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 21.358286] soft-irqs-on + irq-safe-A/21: ok | ok | ok |
[ 21.370941] sirq-safe-A => hirqs-on/12: ok | ok | ok |
[ 21.383607] sirq-safe-A => hirqs-on/21: ok | ok | ok |
[ 21.396266] hard-safe-A + irqs-on/12: ok | ok | ok |
[ 21.408931] soft-safe-A + irqs-on/12: ok | ok | ok |
[ 21.421603] hard-safe-A + irqs-on/21: ok | ok | ok |
[ 21.434274] soft-safe-A + irqs-on/21: ok | ok | ok |
[ 21.446950] hard-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 21.459698] soft-safe-A + unsafe-B #1/123: ok | ok | ok |
[ 21.472460] hard-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 21.485217] soft-safe-A + unsafe-B #1/132: ok | ok | ok |
[ 21.497963] hard-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 21.510714] soft-safe-A + unsafe-B #1/213: ok | ok | ok |
[ 21.523465] hard-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 21.536200] soft-safe-A + unsafe-B #1/231: ok | ok | ok |
[ 21.548947] hard-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 21.561637] soft-safe-A + unsafe-B #1/312: ok | ok | ok |
[ 21.574330] hard-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 21.587066] soft-safe-A + unsafe-B #1/321: ok | ok | ok |
[ 21.599807] hard-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 21.612546] soft-safe-A + unsafe-B #2/123: ok | ok | ok |
[ 21.625304] hard-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 21.638044] soft-safe-A + unsafe-B #2/132: ok | ok | ok |
[ 21.650807] hard-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 21.663550] soft-safe-A + unsafe-B #2/213: ok | ok | ok |
[ 21.676311] hard-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 21.689054] soft-safe-A + unsafe-B #2/231: ok | ok | ok |
[ 21.701799] hard-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 21.714547] soft-safe-A + unsafe-B #2/312: ok | ok | ok |
[ 21.727314] hard-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 21.740048] soft-safe-A + unsafe-B #2/321: ok | ok | ok |
[ 21.752805] hard-irq lock-inversion/123: ok | ok | ok |
[ 21.765560] soft-irq lock-inversion/123: ok | ok | ok |
[ 21.778332] hard-irq lock-inversion/132: ok | ok | ok |
[ 21.791099] soft-irq lock-inversion/132: ok | ok | ok |
[ 21.803888] hard-irq lock-inversion/213: ok | ok | ok |
[ 21.816643] soft-irq lock-inversion/213: ok | ok | ok |
[ 21.829421] hard-irq lock-inversion/231: ok | ok | ok |
[ 21.842171] soft-irq lock-inversion/231: ok | ok | ok |
[ 21.854949] hard-irq lock-inversion/312: ok | ok | ok |
[ 21.867715] soft-irq lock-inversion/312: ok | ok | ok |
[ 21.880502] hard-irq lock-inversion/321: ok | ok | ok |
[ 21.893255] soft-irq lock-inversion/321: ok | ok | ok |
[ 21.906022] hard-irq read-recursion/123: ok |
[ 21.910349] soft-irq read-recursion/123: ok |
[ 21.914676] hard-irq read-recursion/132: ok |
[ 21.918993] soft-irq read-recursion/132: ok |
[ 21.923317] hard-irq read-recursion/213: ok |
[ 21.927632] soft-irq read-recursion/213: ok |
[ 21.931954] hard-irq read-recursion/231: ok |
[ 21.936271] soft-irq read-recursion/231: ok |
[ 21.940594] hard-irq read-recursion/312: ok |
[ 21.944916] soft-irq read-recursion/312: ok |
[ 21.949238] hard-irq read-recursion/321: ok |
[ 21.953551] soft-irq read-recursion/321: ok |
[ 21.957876] -------------------------------------------------------
[ 21.957988] Good, all 218 testcases passed! |
[ 21.958074] ---------------------------------
[ 21.963659] Dentry cache hash table entries: 131072 (order: 7, 1048576 bytes)
[ 21.968279] Inode-cache hash table entries: 65536 (order: 6, 524288 bytes)
[ 22.071515] Memory: 1024992k available (2920k kernel code, 1344k data, 136k init) [fffff80000000000,000000003ff46000]
[ 22.072160] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 22.156160] Calibrating delay using timer specific routine.. 888.86 BogoMIPS (lpj=1479779)
[ 22.157595] Mount-cache hash table entries: 512
[ 22.171305] net_namespace: 648 bytes
[ 22.173816] NET: Registered protocol family 16
[ 22.250788] /pci@1f,0: PCI IO[1fe02000000] MEM[1ff00000000]
[ 22.251009] /pci@1f,0: SABRE PCI Bus Module ver[0:0]
[ 22.252227] PCI: Scanning PBM /pci@1f,0
[ 22.256690] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot
[ 22.256815] pci 0000:02:01.0: PME# disabled
[ 22.357451] SCSI subsystem initialized
[ 22.400547] AUXIO: Found device at /pci@1f,0/pci@1,1/ebus@1/auxio@14,726000
[ 22.404167] /pci@1f,0/pci@1,1/ebus@1/eeprom@14,0: Mostek regs at 0x1fff1000000
[ 22.425298] NET: Registered protocol family 2
[ 22.533868] IP route cache hash table entries: 8192 (order: 3, 65536 bytes)
[ 22.539031] TCP established hash table entries: 32768 (order: 6, 524288 bytes)
[ 22.542581] TCP bind hash table entries: 32768 (order: 7, 1835008 bytes)
[ 22.574770] TCP: Hash tables configured (established 32768 bind 32768)
[ 22.575053] TCP reno registered
[ 22.614450] NET: Registered protocol family 1
[ 22.615982] power: Control reg at 1fff1724000
[ 22.635240] Kprobe smoke test started
[ 22.759844] Kprobe smoke test passed successfully
[ 22.959192] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 22.971385] msgmni has been set to 2003
[ 22.974919] io scheduler noop registered
[ 22.978475] io scheduler cfq registered (default)
[ 22.982618] atyfb: 3D RAGE PRO (Mach64 GP, PQFP, PCI) [0x4750 rev 0x7c]
[ 22.984071] atyfb: 4M SGRAM (1:1), 14.31818 MHz XTAL, 230 MHz PLL, 100 Mhz MCLK, 100 MHz XCLK
[ 22.986493] fbcon: ATY Mach64 (fb0) is primary device
[ 23.059089] Console: switching to colour frame buffer device 144x56
[ 23.083274] atyfb: fb0: ATY Mach64 frame buffer device on PCI
[ 23.179801] /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8: Keyboard port at 1fff13083f8, irq 6
[ 23.180774] /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8: Mouse port at 1fff13062f8, irq 7
[ 23.186766] sunhme.c:v3.10 August 26, 2008 David S. Miller (davem@davemloft.net)
[ 23.196517] eth0: HAPPY MEAL (PCI/CheerIO) 10/100BaseT Ethernet 08:00:20:f5:ba:1d
[ 23.198099] e100: Intel(R) PRO/100 Network Driver, 3.5.23-k4-NAPI
[ 23.198415] e100: Copyright(c) 1999-2006 Intel Corporation
[ 23.223898] e100 0000:02:01.0: PME# disabled
[ 23.231072] e100: eth1: e100_probe: addr 0x1ff00002000, irq 15, MAC addr 00:d0:b7:e4:d6:f1
[ 23.232687] netconsole: local port 6665
[ 23.232950] netconsole: local IP 192.168.1.5
[ 23.233173] netconsole: interface eth1
[ 23.233367] netconsole: remote port 6667
[ 23.233571] netconsole: remote IP 192.168.1.3
[ 23.233801] netconsole: remote ethernet address 00:08:c7:da:88:fb
[ 23.234141] netconsole: device eth1 not up yet, forcing it
[ 23.279743] e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
[ 23.280283] netconsole: carrier detect appears untrustworthy, waiting 4 seconds
[ 27.323532] console [netcon0] enabled
[ 28.521598] netconsole: network logging started
[ 28.532863] Driver 'sd' needs updating - please use bus_type methods
[ 28.543959] Driver 'sr' needs updating - please use bus_type methods
[ 28.557924] scsi0 : pata_cmd64x
[ 28.573880] scsi1 : pata_cmd64x
[ 28.584894] ata1: PATA max MWDMA2 cmd 0x1fe02c00000 ctl 0x1fe02c00008 bmdma 0x1fe02c00020 irq 14
[ 28.594900] ata2: PATA max MWDMA2 cmd 0x1fe02c00010 ctl 0x1fe02c00018 bmdma 0x1fe02c00028 irq 14
[ 28.762973] ata1.00: ATA-5: ST320011A, 3.10, max UDMA/100
[ 28.772425] ata1.00: 39102336 sectors, multi 0: LBA
[ 28.789484] ata1.00: configured for MWDMA2
[ 28.966201] scsi 0:0:0:0: Direct-Access ATA ST320011A 3.10 PQ: 0 ANSI: 5
[ 28.981385] sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 28.991592] sd 0:0:0:0: [sda] Write Protect is off
[ 29.002396] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.014373] sd 0:0:0:0: [sda] 39102336 512-byte hardware sectors: (20.0 GB/18.6 GiB)
[ 29.024624] sd 0:0:0:0: [sda] Write Protect is off
[ 29.035137] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 29.045375] sda: sda1 sda2
[ 29.077794] sd 0:0:0:0: [sda] Attached SCSI disk
[ 29.091617] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 29.107658] mice: PS/2 mouse device common for all mice
[ 29.124328] rtc-m48t59 rtc-m48t59.0: rtc core: registered m48t59 as rtc0
[ 29.147410] TCP cubic registered
[ 29.157979] NET: Registered protocol family 17
[ 29.176361] RPC: Registered udp transport module.
[ 29.186071] RPC: Registered tcp transport module.
[ 29.201571] rtc-m48t59 rtc-m48t59.0: setting system clock to 2008-11-11 03:24:40 UTC (1226373880)
[ 29.771270] input: Sun Type 5 keyboard as /class/input/input0
[ 29.962863] EXT3-fs: mounted filesystem with ordered data mode.
[ 29.973192] VFS: Mounted root (ext3 filesystem) readonly.
[ 29.984508] kjournald starting. Commit interval 5 seconds
[66033.381833] BUG: spinlock lockup on CPU#0, metalog/1322, 00000000007f1430
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.28-rc4: BUG: spinlock lockup on CPU#0
2008-11-11 23:32 2.6.28-rc4: BUG: spinlock lockup on CPU#0 Alexander Beregalov
@ 2008-11-11 23:49 ` David Miller
2008-11-12 0:09 ` Alexander Beregalov
0 siblings, 1 reply; 4+ messages in thread
From: David Miller @ 2008-11-11 23:49 UTC (permalink / raw)
To: a.beregalov; +Cc: linux-kernel, sparclinux, kernel-testers, rjw
From: Alexander Beregalov <a.beregalov@gmail.com>
Date: Wed, 12 Nov 2008 02:32:30 +0300
> It is on sparc64 (Ultra 10). 2.6.28-rc4-00011-g3ad4f59
>
> BUG: spinlock lockup on CPU#0, metalog/1322, 00000000007f1430
> Kernel panic - not syncing: Aiee, killing interrupt handler!
>
> It seems Sysrq does not work.
>
> David, how can I provide more info before I reboot it ?
>
> Full dmesg:
Hmm, this BUG message should have given you a register dump and a
backtrace.
Can you give it a "Alt-SysRQ-p" and show the output?
Actually, if you got this over a serial console or
similar, you're not getting the register dump because
the console loglevel is filtering them out.
If that's what's happening, reboot with "ignore_loglevel"
(I always boot with this option, by adding it to the
default kernel command line options in /etc/silo.conf)
Also, in situations where the system is already booted and
you want to see things like the Alt-SysRQ-p register dumps
on the console, you'll need to type something like
"Alt-SysRQ-8" to bump the console log level.
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.28-rc4: BUG: spinlock lockup on CPU#0
2008-11-11 23:49 ` David Miller
@ 2008-11-12 0:09 ` Alexander Beregalov
2008-11-12 0:15 ` David Miller
0 siblings, 1 reply; 4+ messages in thread
From: Alexander Beregalov @ 2008-11-12 0:09 UTC (permalink / raw)
To: David Miller; +Cc: linux-kernel, sparclinux, kernel-testers, rjw
2008/11/12 David Miller <davem@davemloft.net>:
> From: Alexander Beregalov <a.beregalov@gmail.com>
> Date: Wed, 12 Nov 2008 02:32:30 +0300
>
>> It is on sparc64 (Ultra 10). 2.6.28-rc4-00011-g3ad4f59
>>
>> BUG: spinlock lockup on CPU#0, metalog/1322, 00000000007f1430
>> Kernel panic - not syncing: Aiee, killing interrupt handler!
>>
>> It seems Sysrq does not work.
>>
>> David, how can I provide more info before I reboot it ?
>>
>> Full dmesg:
>
> Hmm, this BUG message should have given you a register dump and a
> backtrace.
>
> Can you give it a "Alt-SysRQ-p" and show the output?
No, sysrq does not work, even Stop-A does not work now.
How could it be.
>
> Actually, if you got this over a serial console or
> similar, you're not getting the register dump because
> the console loglevel is filtering them out.
Yes, I use netconsole.
>
> If that's what's happening, reboot with "ignore_loglevel"
> (I always boot with this option, by adding it to the
> default kernel command line options in /etc/silo.conf)
>
> Also, in situations where the system is already booted and
> you want to see things like the Alt-SysRQ-p register dumps
> on the console, you'll need to type something like
> "Alt-SysRQ-8" to bump the console log level.
Yes, I know, thanks.
Ok, I have rebooted it, let's hope this will happen again...
Hm, fsck says Superblock write time is in future.
But rtc-m48t59 works correctly now
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: 2.6.28-rc4: BUG: spinlock lockup on CPU#0
2008-11-12 0:09 ` Alexander Beregalov
@ 2008-11-12 0:15 ` David Miller
0 siblings, 0 replies; 4+ messages in thread
From: David Miller @ 2008-11-12 0:15 UTC (permalink / raw)
To: a.beregalov; +Cc: linux-kernel, sparclinux, kernel-testers, rjw
From: "Alexander Beregalov" <a.beregalov@gmail.com>
Date: Wed, 12 Nov 2008 03:09:54 +0300
> 2008/11/12 David Miller <davem@davemloft.net>:
> > From: Alexander Beregalov <a.beregalov@gmail.com>
> > Date: Wed, 12 Nov 2008 02:32:30 +0300
> >
> >> It is on sparc64 (Ultra 10). 2.6.28-rc4-00011-g3ad4f59
> >>
> >> BUG: spinlock lockup on CPU#0, metalog/1322, 00000000007f1430
> >> Kernel panic - not syncing: Aiee, killing interrupt handler!
> >>
> >> It seems Sysrq does not work.
> >>
> >> David, how can I provide more info before I reboot it ?
> >>
> >> Full dmesg:
> >
> > Hmm, this BUG message should have given you a register dump and a
> > backtrace.
> >
> > Can you give it a "Alt-SysRQ-p" and show the output?
> No, sysrq does not work, even Stop-A does not work now.
> How could it be.
The cpu stuck on the spinlock has interrupts disabled, but this
is the cpu that services console interrupts.
That's how it could be.
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-11-12 0:15 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-11-11 23:32 2.6.28-rc4: BUG: spinlock lockup on CPU#0 Alexander Beregalov
2008-11-11 23:49 ` David Miller
2008-11-12 0:09 ` Alexander Beregalov
2008-11-12 0:15 ` David Miller
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).