LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: David Brownell <david-b@pacbell.net>
To: broonie@opensource.wolfsonmicro.com, lrg@slimlogic.co.uk
Cc: lkml <linux-kernel@vger.kernel.org>
Subject: [patch 2.6.28-rc4 1/3] regulator: code shrink (v2)
Date: Tue, 11 Nov 2008 17:38:53 -0800 [thread overview]
Message-ID: <200811111738.53276.david-b@pacbell.net> (raw)
From: David Brownell <dbrownell@users.sourceforge.net>
Shrink regulator core by removing duplication in attribute printing
and probe() cleanup paths. Saves about 340 bytes (object) on ARM.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
---
Difference from V1: applies without the REGULATOR_MODE_OFF patch.
drivers/regulator/core.c | 111 +++++++++++++++++----------------------------
1 file changed, 44 insertions(+), 67 deletions(-)
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -257,12 +257,8 @@ static ssize_t regulator_name_show(struc
return sprintf(buf, "%s\n", name);
}
-static ssize_t regulator_opmode_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t regulator_print_opmode(char *buf, int mode)
{
- struct regulator_dev *rdev = dev_get_drvdata(dev);
- int mode = _regulator_get_mode(rdev);
-
switch (mode) {
case REGULATOR_MODE_FAST:
return sprintf(buf, "fast\n");
@@ -276,12 +272,16 @@ static ssize_t regulator_opmode_show(str
return sprintf(buf, "unknown\n");
}
-static ssize_t regulator_state_show(struct device *dev,
- struct device_attribute *attr, char *buf)
+static ssize_t regulator_opmode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct regulator_dev *rdev = dev_get_drvdata(dev);
- int state = _regulator_is_enabled(rdev);
+ return regulator_print_opmode(buf, _regulator_get_mode(rdev));
+}
+
+static ssize_t regulator_print_state(char *buf, int state)
+{
if (state > 0)
return sprintf(buf, "enabled\n");
else if (state == 0)
@@ -290,6 +290,14 @@ static ssize_t regulator_state_show(stru
return sprintf(buf, "unknown\n");
}
+static ssize_t regulator_state_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct regulator_dev *rdev = dev_get_drvdata(dev);
+
+ return regulator_print_state(buf, _regulator_is_enabled(rdev));
+}
+
static ssize_t regulator_min_uA_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -399,22 +407,6 @@ static ssize_t regulator_suspend_standby
return sprintf(buf, "%d\n", rdev->constraints->state_standby.uV);
}
-static ssize_t suspend_opmode_show(struct regulator_dev *rdev,
- unsigned int mode, char *buf)
-{
- switch (mode) {
- case REGULATOR_MODE_FAST:
- return sprintf(buf, "fast\n");
- case REGULATOR_MODE_NORMAL:
- return sprintf(buf, "normal\n");
- case REGULATOR_MODE_IDLE:
- return sprintf(buf, "idle\n");
- case REGULATOR_MODE_STANDBY:
- return sprintf(buf, "standby\n");
- }
- return sprintf(buf, "unknown\n");
-}
-
static ssize_t regulator_suspend_mem_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -422,8 +414,8 @@ static ssize_t regulator_suspend_mem_mod
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_mem.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_mem.mode);
}
static ssize_t regulator_suspend_disk_mode_show(struct device *dev,
@@ -433,8 +425,8 @@ static ssize_t regulator_suspend_disk_mo
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_disk.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_disk.mode);
}
static ssize_t regulator_suspend_standby_mode_show(struct device *dev,
@@ -444,8 +436,8 @@ static ssize_t regulator_suspend_standby
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
- return suspend_opmode_show(rdev,
- rdev->constraints->state_standby.mode, buf);
+ return regulator_print_opmode(buf,
+ rdev->constraints->state_standby.mode);
}
static ssize_t regulator_suspend_mem_state_show(struct device *dev,
@@ -456,10 +448,8 @@ static ssize_t regulator_suspend_mem_sta
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
- if (rdev->constraints->state_mem.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_mem.enabled);
}
static ssize_t regulator_suspend_disk_state_show(struct device *dev,
@@ -470,10 +460,8 @@ static ssize_t regulator_suspend_disk_st
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
- if (rdev->constraints->state_disk.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_disk.enabled);
}
static ssize_t regulator_suspend_standby_state_show(struct device *dev,
@@ -484,10 +472,8 @@ static ssize_t regulator_suspend_standby
if (!rdev->constraints)
return sprintf(buf, "not defined\n");
- if (rdev->constraints->state_standby.enabled)
- return sprintf(buf, "enabled\n");
- else
- return sprintf(buf, "disabled\n");
+ return regulator_print_state(buf,
+ rdev->constraints->state_standby.enabled);
}
static struct device_attribute regulator_dev_attrs[] = {
@@ -1761,20 +1747,14 @@ struct regulator_dev *regulator_register
/* preform any regulator specific init */
if (init_data->regulator_init) {
ret = init_data->regulator_init(rdev->reg_data);
- if (ret < 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret < 0)
+ goto clean;
}
/* set regulator constraints */
ret = set_machine_constraints(rdev, &init_data->constraints);
- if (ret < 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret < 0)
+ goto clean;
/* register with sysfs */
rdev->dev.class = ®ulator_class;
@@ -1782,11 +1762,8 @@ struct regulator_dev *regulator_register
snprintf(rdev->dev.bus_id, sizeof(rdev->dev.bus_id),
"regulator.%d", atomic_inc_return(®ulator_no) - 1);
ret = device_register(&rdev->dev);
- if (ret != 0) {
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret != 0)
+ goto clean;
dev_set_drvdata(&rdev->dev, rdev);
@@ -1794,12 +1771,8 @@ struct regulator_dev *regulator_register
if (init_data->supply_regulator_dev) {
ret = set_supply(rdev,
dev_get_drvdata(init_data->supply_regulator_dev));
- if (ret < 0) {
- device_unregister(&rdev->dev);
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
- }
+ if (ret < 0)
+ goto scrub;
}
/* add consumers devices */
@@ -1811,10 +1784,7 @@ struct regulator_dev *regulator_register
for (--i; i >= 0; i--)
unset_consumer_device_supply(rdev,
init_data->consumer_supplies[i].dev);
- device_unregister(&rdev->dev);
- kfree(rdev);
- rdev = ERR_PTR(ret);
- goto out;
+ goto scrub;
}
}
@@ -1822,6 +1792,13 @@ struct regulator_dev *regulator_register
out:
mutex_unlock(®ulator_list_mutex);
return rdev;
+
+scrub:
+ device_unregister(&rdev->dev);
+clean:
+ kfree(rdev);
+ rdev = ERR_PTR(ret);
+ goto out;
}
EXPORT_SYMBOL_GPL(regulator_register);
reply other threads:[~2008-11-12 1:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200811111738.53276.david-b@pacbell.net \
--to=david-b@pacbell.net \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@slimlogic.co.uk \
--subject='Re: [patch 2.6.28-rc4 1/3] regulator: code shrink (v2)' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).