LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Rodolfo Giometti <giometti@enneenne.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: "Anton Vorontsov" <cbouatmailru@gmail.com>,
"Grazvydas Ignotas" <notasas@gmail.com>,
linux-kernel@vger.kernel.org, "Pali Rohár" <pali.rohar@gmail.com>
Subject: Re: [PATCH 03/14] POWER: bq27x00: Fix current now property
Date: Mon, 7 Feb 2011 09:07:26 +0100 [thread overview]
Message-ID: <20110207080725.GC6177@enneenne.com> (raw)
In-Reply-To: <1296953291-10373-4-git-send-email-lars@metafoo.de>
On Sun, Feb 06, 2011 at 01:48:00AM +0100, Lars-Peter Clausen wrote:
> From: Pali Rohár <pali.rohar@gmail.com>
>
> According to the bq27000 datasheet to obtain the current value in Micro-ampere
> from the AI register it has to be transformed by the following formula:
> current = AI * 3570 / 20
>
> This patch adjust the drivers code accordingly.
>
> Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
> ---
> drivers/power/bq27x00_battery.c | 7 +++++--
> 1 files changed, 5 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/power/bq27x00_battery.c b/drivers/power/bq27x00_battery.c
> index 4f74659..1b06134 100644
> --- a/drivers/power/bq27x00_battery.c
> +++ b/drivers/power/bq27x00_battery.c
> @@ -44,6 +44,8 @@
> #define BQ27500_FLAG_DSC BIT(0)
> #define BQ27500_FLAG_FC BIT(9)
>
> +#define BQ27000_RS 20 /* Resistor sense */
> +
> /* If the system has several batteries we need a different name for each
> * of them...
> */
> @@ -149,7 +151,7 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
>
> if (di->chip == BQ27500) {
> /* bq27500 returns signed value */
> - curr = (int)(s16)curr;
> + curr = (int)((s16)curr) * 1000;
> } else {
> ret = bq27x00_read(BQ27x00_REG_FLAGS, &flags, 0, di);
> if (ret < 0) {
> @@ -160,9 +162,10 @@ static int bq27x00_battery_current(struct bq27x00_device_info *di)
> dev_dbg(di->dev, "negative current!\n");
> curr = -curr;
> }
> + curr = curr * 3570 / BQ27000_RS;
> }
>
> - return curr * 1000;
> + return curr;
> }
>
> /*
> --
> 1.7.2.3
>
Acked-by: Rodolfo Giometti <giometti@linux.it>
--
GNU/Linux Solutions e-mail: giometti@enneenne.com
Linux Device Driver giometti@linux.it
Embedded Systems phone: +39 349 2432127
UNIX programming skype: rodolfo.giometti
Freelance ICT Italia - Consulente ICT Italia - www.consulenti-ict.it
next prev parent reply other threads:[~2011-02-07 8:07 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-02-06 0:47 [PATCH 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support Lars-Peter Clausen
2011-02-06 0:47 ` [PATCH 01/14] POWER: bq27x00: Add type property Lars-Peter Clausen
2011-02-06 16:43 ` Rodolfo Giometti
2011-02-06 0:47 ` [PATCH 02/14] POWER: bq27x00: Improve temperature precession Lars-Peter Clausen
2011-02-07 8:06 ` Rodolfo Giometti
2011-02-06 0:48 ` [PATCH 03/14] POWER: bq27x00: Fix current now property Lars-Peter Clausen
2011-02-07 8:07 ` Rodolfo Giometti [this message]
2011-02-06 0:48 ` [PATCH 04/14] POWER: bq27x00: Return -ENODEV for properties if the battery is not present Lars-Peter Clausen
2011-02-06 16:40 ` Rodolfo Giometti
2011-02-06 0:48 ` [PATCH 05/14] POWER: bq27x00: Prepare code for addition of bq27000 platform driver Lars-Peter Clausen
2011-02-07 8:09 ` Rodolfo Giometti
2011-02-06 0:48 ` [PATCH 06/14] POWER: bq27x00: Add bq27000 support Lars-Peter Clausen
2011-02-06 0:48 ` [PATCH 07/14] POWER: bq27X00: Cache battery registers Lars-Peter Clausen
2011-02-06 0:48 ` [PATCH 08/14] POWER: bq27x00: Poll battery state Lars-Peter Clausen
2011-02-06 0:48 ` [PATCH 09/14] POWER: bq27x00: Add new properties Lars-Peter Clausen
2011-02-06 0:48 ` [PATCH 10/14] POWER: bq27x00: Add MODULE_DEVICE_TABLE Lars-Peter Clausen
2011-02-06 16:49 ` Rodolfo Giometti
2011-02-06 0:48 ` [PATCH 11/14] POWER: bq27x00: Give more specific reports on battery status Lars-Peter Clausen
2011-02-06 16:38 ` Rodolfo Giometti
2011-02-06 0:48 ` [PATCH 12/14] POWER: bq27x00: Minor cleanups Lars-Peter Clausen
2011-02-06 0:48 ` [PATCH 13/14] POWER: bq27x00: Cleanup bq27x00_i2c_read Lars-Peter Clausen
2011-02-06 0:48 ` [PATCH 14/14] POWER: Ignore -ENODATA errors when generating a uevent Lars-Peter Clausen
2011-02-06 22:47 ` [PATCH 00/14] POWER: BQ27x00: New Properties, fixes, bq27000 support Felipe Contreras
2011-02-06 23:09 ` Lars-Peter Clausen
2011-02-07 0:00 ` Felipe Contreras
2011-02-07 0:12 ` Lars-Peter Clausen
2011-02-07 10:52 ` Pali Rohár
2011-02-07 0:58 ` Grazvydas Ignotas
2011-02-07 1:30 ` Lars-Peter Clausen
2011-02-08 11:40 ` Grazvydas Ignotas
2011-02-08 16:13 ` Lars-Peter Clausen
2011-02-08 16:28 ` Anton Vorontsov
2011-02-08 17:09 ` Lars-Peter Clausen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110207080725.GC6177@enneenne.com \
--to=giometti@enneenne.com \
--cc=cbouatmailru@gmail.com \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=notasas@gmail.com \
--cc=pali.rohar@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).