LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
To: tapio.vihuri@nokia.com
Cc: peter.ujfalusi@nokia.com, randy.dunlap@oracle.com,
	linux-kernel@vger.kernel.org, alsa-devel@alsa-project.org,
	ilkka.koskinen@nokia.com, samu.p.onkalo@nokia.com
Subject: Re: [PATCH v7 1/2] ECI: input: introduce ECI accessory input driver
Date: Sat, 19 Feb 2011 01:22:09 -0800	[thread overview]
Message-ID: <20110219092209.GA15014@core.coreip.homeip.net> (raw)
In-Reply-To: <1297775520-1993-2-git-send-email-tapio.vihuri@nokia.com>

Hi Tapio,

On Tue, Feb 15, 2011 at 03:11:59PM +0200, tapio.vihuri@nokia.com wrote:
> From: Tapio Vihuri <tapio.vihuri@nokia.com>
> 
> ECI stands for (Enhancement Control Interface).
> 
> ECI is better known as Multimedia Headset for Nokia phones.
> If headset has many buttons, like play, vol+, vol- etc. then it is propably
> ECI accessory.
> Among multiple buttons ECI accessory contains memory for storing several
> parameters.
> 
> ECI input driver provides the following features:
> - reading ECI configuration memory
> - ECI buttons as input events
> - ECI i2c-controller part as a bridge between host CPU I2C and
>   ECI accessory communication
> 

I think it looks much better now, however I bet we can make it even
better ;)

> Signed-off-by: Tapio Vihuri <tapio.vihuri@nokia.com>
> ---
>  drivers/input/misc/Kconfig        |   47 ++
>  drivers/input/misc/Makefile       |    3 +-
>  drivers/input/misc/eci.c          |  851 +++++++++++++++++++++++++++++++++++++
>  drivers/input/misc/eci_at20-i2c.c |  713 +++++++++++++++++++++++++++++++
>  include/linux/input/eci.h         |  189 ++++++++
>  5 files changed, 1802 insertions(+), 1 deletions(-)
>  create mode 100644 drivers/input/misc/eci.c
>  create mode 100644 drivers/input/misc/eci_at20-i2c.c
>  create mode 100644 include/linux/input/eci.h
> 
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index b0c6772..2f02eda 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -114,6 +114,53 @@ config INPUT_APANEL
>  	 To compile this driver as a module, choose M here: the module will
>  	 be called apanel.
>  
> +config INPUT_ECI
> +	tristate "AV ECI (Enhancement Control Interface) input driver"
> +	default n

No need to specify "default n" - 'n' is the default.

> +	select INPUT_SPARSEKMAP
> +	help
> +	The Enhancement Control Interface functionality
> +	  ECI is better known as Multimedia Headset for Nokia phones.
> +	  If headset has many buttons, like play, vol+, vol- etc. then
> +	  it is propably ECI accessory.
> +	  Among multiple buttons ECI accessory contains memory for storing
> +	  several parameters.
> +
> +	  ECI input driver provides the following features:
> +	  - reading ECI configuration memory
> +	  - ECI buttons as input events
> +
> +	  ECI input driver needs some ECI controller method, select
> +	  appropriate controller below.
> +
> +	  Say 'y' here to statically link this module into the kernel or 'm'
> +	  to build it as a dynamically loadable module. The module will be
> +	  called eci.ko
> +
> +config ECI_DEBUG
> +	bool "ECI driver debug"
> +	depends on INPUT_ECI
> +	help
> +	  Say Y here to enable debugging messages for ECI input driver.
> +
> +	  Ease understanding ECI accessory configuration embedded in
> +	  accessory's memory.
> +	  Add memory and buttons parsing info to module eci.ko
> +

Do we need it as a config option? Do we expect users recompile the
driver with debug? Maybe just leave #define DEBUG commented out in
eci.c?

> +config INPUT_ECI_AT20
> +	tristate "ECI controller method"

It should probably say "Support for ECI connected via AT20 I2C chip" or
something similar.

> +	depends on INPUT_ECI && I2C && X86_MRST && INPUT_MISC

Does it really have to depend on MRST? Also, dependency on INPUT_MISC is
not needed, you won't descend here if INPUT_MISC is disabled.

> +	default y

No, no default 'y' please.

> +	help
> +	  This selects the used ECI controller
> +
> +	  ECI controller is kind of bridge between host CPU I2C and
> +	  ECI accessory ECI communication.

Need better description as well.

> +
> +	  Say 'y' here to statically link this module into the kernel or 'm'
> +	  to build it as a dynamically loadable module. The module will be
> +	  called eci_at20-i2c.ko
> +
>  config INPUT_IXP4XX_BEEPER
>  	tristate "IXP4XX Beeper support"
>  	depends on ARCH_IXP4XX
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 9b47971..7631b33 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -23,6 +23,8 @@ obj-$(CONFIG_INPUT_CMA3000_I2C)		+= cma3000_d0x_i2c.o
>  obj-$(CONFIG_INPUT_COBALT_BTNS)		+= cobalt_btns.o
>  obj-$(CONFIG_INPUT_DM355EVM)		+= dm355evm_keys.o
>  obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
> +obj-$(CONFIG_INPUT_ECI)			+= eci.o
> +obj-$(CONFIG_INPUT_ECI_AT20)		+= eci_at20-i2c.o
>  obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
>  obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
>  obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
> @@ -43,4 +45,3 @@ obj-$(CONFIG_INPUT_UINPUT)		+= uinput.o
>  obj-$(CONFIG_INPUT_WISTRON_BTNS)	+= wistron_btns.o
>  obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
>  obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
> -
> diff --git a/drivers/input/misc/eci.c b/drivers/input/misc/eci.c
> new file mode 100644
> index 0000000..81a5c20
> --- /dev/null
> +++ b/drivers/input/misc/eci.c
> @@ -0,0 +1,851 @@
> +/*
> + * This file is part of ECI (Enhancement Control Interface) accessory input
> + * driver
> + *
> + * Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Tapio Vihuri <tapio.vihuri@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *

Probably should stop quoting the address in case FSF moves.

> + */
> +
> +/*
> + * ECI stands for (Enhancement Control Interface).
> + *
> + * ECI is better known as Multimedia Headset for Nokia phones.
> + * If headset has many buttons, like play, vol+, vol- etc. then it is propably
> + * ECI accessory.
> + * Among several buttons ECI accessory contains memory for storing several
> + * parameters.
> + *
> + * ECI input driver provides the following features:
> + *  - reading ECI configuration memory
> + *  - ECI buttons as input events
> + */
> +
> +#if defined(CONFIG_ECI_DEBUG)
> +#define DEBUG
> +#endif
> +
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/platform_device.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +
> +#include <linux/input.h>
> +#include <linux/input/sparse-keymap.h>
> +#include <linux/input/eci.h>
> +
> +#define ECI_DRIVERNAME	"ECI_accessory"
> +
> +#define ECI_WAIT_SEND_BUTTON		5	/* ms */
> +#define ECI_WAIT_BUS_SETTLE		40	/* ms */
> +#define ECI_TRY_GET_MEMORY		2000	/* ms */
> +#define ECI_TRY_INIT_IO			200	/* ms */
> +#define ECI_TRY_SET_MIC			200	/* ms */
> +#define ECI_KEY_REPEAT_INTERVAL		400	/* ms */
> +
> +#define ECI_EKEY_BLOCK_ID			0xb3
> +#define ECI_ENHANCEMENT_FEATURE_BLOCK_ID	0x02
> +
> +/* Map ECI inputs to events */
> +static const struct key_entry eci_keymap[] = {
> +	{ KE_KEY, 0x00, { KEY_UNKNOWN } }, /* No feature */
> +	{ KE_KEY, 0x01, { KEY_UNKNOWN } }, /* Ignition Sense */
> +	{ KE_KEY, 0x02, { KEY_UNKNOWN } }, /* Car-Kit Handset Hook */
> +	{ KE_KEY, 0x03, { KEY_BATTERY } }, /* Power Supply/Car Battery Det  */
> +	{ KE_KEY, 0x06, { KEY_AUDIO } },   /* External audio In */
> +	{ KE_KEY, 0x07, { KEY_PHONE } },   /* Send, End, and Voice Recogn */
> +	{ KE_VSW, 0x08, { .sw = { SW_HEADPHONE_INSERT} } }, /* Headphone plug */
> +	{ KE_KEY, 0x0a, { KEY_UNKNOWN } },    /* Device Power Request */
> +	{ KE_KEY, 0x0b, { KEY_VOLUMEUP } },   /* Volume Up */
> +	{ KE_KEY, 0x0c, { KEY_VOLUMEDOWN } }, /* Volume Down */
> +	{ KE_KEY, 0x0d, { KEY_PLAYPAUSE } },  /* Play / Pause */
> +	{ KE_KEY, 0x0e, { KEY_STOP } },       /* Stop */
> +	{ KE_KEY, 0x0f, { KEY_FORWARD } }, /* Next/Fast Fward/Autosearch up */
> +	{ KE_KEY, 0x10, { KEY_REWIND } },  /* Prev/Rewind/Autosearch down */
> +	{ KE_KEY, 0x11, { KEY_UNKNOWN } }, /* Push to Talk over Cellular */
> +	{ KE_KEY, 0x14, { KEY_UNKNOWN } }, /* Synchronization Button */
> +	{ KE_KEY, 0x15, { KEY_RADIO } },   /* Music/Radio/Off Selector */
> +	{ KE_KEY, 0x16, { KEY_UNKNOWN } }, /* Redial */
> +	{ KE_KEY, 0x17, { KEY_UNKNOWN } }, /* Left Soft Key */
> +	{ KE_KEY, 0x18, { KEY_UNKNOWN } }, /* Right Soft key */
> +	{ KE_KEY, 0x19, { KEY_SEND } },    /* Send key */
> +	{ KE_KEY, 0x1a, { KEY_END } },     /* End key */
> +	{ KE_KEY, 0x1b, { KEY_UNKNOWN } }, /* Middle Soft key */
> +	{ KE_KEY, 0x1c, { KEY_UP } },      /* UP key/joystick direction */
> +	{ KE_KEY, 0x1d, { KEY_DOWN } },    /* DOWN key/joystick direction */
> +	{ KE_KEY, 0x1e, { KEY_RIGHT } },   /* RIGHT key/joystick direction */
> +	{ KE_KEY, 0x1f, { KEY_LEFT } },    /* LEFT key/joystick direction */
> +	{ KE_KEY, 0x20, { KEY_UNKNOWN } }, /* Symbian Application key */
> +	{ KE_KEY, 0x21, { KEY_UNKNOWN } }, /* Terminal Applicat Ctrl Input */
> +	{ KE_KEY, 0x23, { KEY_UNKNOWN } }, /* USB Class Switching */
> +	{ KE_KEY, 0x24, { KEY_MUTE } },    /* Mute */
> +	{ KE_END, 0 },
> +};
> +
> +#define ECI_KEY_MAX	0x24
> +
> +#define ECI_INT_ENABLE		1
> +#define ECI_INT_DELAY_ENABLE	(1<<1)
> +#define ECI_INT_LEN_76MS	0
> +#define ECI_INT_LEN_82MS	(1<<5)
> +#define ECI_INT_LEN_37MS	(2<<5)
> +#define ECI_INT_LEN_19MS	(3<<5)
> +#define ECI_INT_LEN_10MS	(4<<5)
> +#define ECI_INT_LEN_5MS		(5<<5)
> +#define ECI_INT_LEN_2MS		(6<<5)
> +#define ECI_INT_LEN_120US	(7<<5)
> +
> +struct eci_mem_block {
> +	u8 id;
> +	u8 len;
> +	u16 size;
> +};
> +
> +static struct eci_cb eci_callback;
> +static struct audio_hsmic_event hsmic_event;
> +
> +static struct eci_data *the_eci;

The statics need to go away.

> +
> +/* Returns size of accessory memory or error */
> +static int eci_get_ekey(struct eci_data *eci, int *key)
> +{
> +	u8 buf[4];
> +	struct eci_mem_block *ekey = (void *)buf;

Instead of casting maybe define eci_mem_block as an union?

> +	int ret;
> +
> +	/* Read always four bytes */
> +	ret = eci->eci_hw_ops->acc_read_direct(0, buf);
> +
> +	if (ret)
> +		return ret;
> +
> +	if (ekey->id != ECI_EKEY_BLOCK_ID)
> +		return -ENODEV;
> +
> +	*key = cpu_to_be16(ekey->size);

I know I already asked this, but it still does not look right to me. You
read some data off the wire and you assume it to be in _CPU_ endianness but
convert to be16? And later you use the data (compare, etc) as if it was
in CPU endianness.

I think the structure definition should be as follows:

union eci_mem_block {
	struct {
		u8 id;
		u8 len;
		__be16 size;
	};
	u8 raw[4];
};

and then you do

	*mem_size = be16_to_cpu(ekey.size);

BTW, why is it called eci_get_ekey() and not eci_get_memory_size()?

> +
> +	return 0;
> +}
> +
> +/* Read ECI device memory into buffer */
> +static int eci_get_memory(struct eci_data *eci, int *restart)
> +{
> +	int i, ret;
> +
> +	for (i = *restart; i < eci->mem_size; i += 4) {
> +		ret = eci->eci_hw_ops->acc_read_direct(i, eci->memory + i);
> +		*restart = i;
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return ret;
> +}
> +
> +/*
> + * This should be really init_features, but most oftens these are just buttons
> + */
> +static int eci_init_buttons(struct eci_data *eci)
> +{
> +	struct enchancement_features_fixed *eff = eci->e_features_fix;
> +	u8 n, mireg;
> +	int ret;
> +	u8 buf[4];
> +
> +	n = eff->number_of_features;
> +
> +	if (n > ECI_MAX_FEATURE_COUNT)
> +		return -EINVAL;
> +
> +	ret = eci->eci_hw_ops->acc_write_reg(ECICMD_MIC_CTRL, ECI_MIC_OFF);
> +	if (ret)
> +		return ret;
> +
> +	ret = eci->eci_hw_ops->acc_read_reg(ECICMD_MASTER_INT_REG, buf, 1);
> +	if (ret)
> +		return ret;
> +
> +	mireg = buf[0];
> +	mireg &= ~ECI_INT_ENABLE;
> +	mireg |= ECI_INT_LEN_120US | ECI_INT_DELAY_ENABLE;
> +
> +	ret = eci->eci_hw_ops->acc_write_reg(ECICMD_MASTER_INT_REG, mireg);
> +	if (ret)
> +		return ret;
> +
> +	msleep(ECI_WAIT_BUS_SETTLE);
> +	mireg |= ECI_INT_ENABLE;
> +	ret = eci->eci_hw_ops->acc_write_reg(ECICMD_MASTER_INT_REG, mireg);
> +	if (ret)
> +		return ret;
> +
> +	msleep(ECI_WAIT_BUS_SETTLE);
> +
> +	return ret;
> +}
> +
> +/* Find "enchangement features" block from buffer */
> +static int eci_get_enchancement_features(struct eci_data *eci)
> +{
> +	u8 *mem = (void *)eci->memory;
> +	struct eci_mem_block *b = (void *)mem;
> +	struct eci_mem_block *mem_end = (void *)(eci->memory + eci->mem_size);
> +
> +	if (b->id != ECI_EKEY_BLOCK_ID)
> +		return -ENODEV;
> +
> +	do {
> +		dev_dbg(eci->dev, "skip BLOCK 0x%02x, LEN 0x%02x\n",
> +				b->id, b->len);
> +		if (!b->len)
> +			return -EINVAL;
> +
> +		mem += b->len;
> +		b = (void *)mem;
> +		eci->e_features_fix = (void *)b;

Amount of casting here makes me cry :(

> +		dev_dbg(eci->dev, "found BLOCK 0x%02x, LEN 0x%02x\n",
> +				b->id, b->len);
> +		if (b->id == ECI_ENHANCEMENT_FEATURE_BLOCK_ID)
> +			return 0;
> +	} while (b < mem_end);
> +
> +	dev_dbg(eci->dev, "can't find ECI enchangement features block\n");
> +
> +	return -ENFILE;
> +}
> +
> +/*
> + * Find out ECI features.
> + * All ECI memory block parsing are done here, be carefull as
> + * pointers to memory tend to go wrong easily.
> + * ECI "Enhancement Features block has variable size, so we try to
> + * catch pointers out of block due memory reading errors etc.
> + *
> + * I/O support field is not implemented.
> + * Data direction field is not implemented, nor writing to the ECI I/O
> + */
> +static int eci_parse_enchancement_features(struct eci_data *eci)
> +{
> +	struct enchancement_features_fixed *eff = eci->e_features_fix;
> +	struct enchancement_features_variable *efv = &eci->e_features_var;
> +	int i;
> +	u8 n, k;
> +	void *mem_end = (void *)((u8 *)eff + eff->length);
> +
> +	dev_dbg(eci->dev, "block id 0x%02x length 0x%02x connector "
> +			"configuration 0x%02x\n", eff->block_id, eff->length,
> +			eff->connector_conf);
> +	n = eff->number_of_features;
> +	dev_dbg(eci->dev, "number of features %d\n", n);
> +
> +	if (n > ECI_MAX_FEATURE_COUNT) {
> +		dev_dbg(eci->dev, "number of features out of range\n");
> +		return -EINVAL;
> +	}
> +
> +	k = DIV_ROUND_UP(n, 8);
> +	dev_dbg(eci->dev, "I/O support bytes count %d\n", k);
> +
> +	efv->io_support = &eff->number_of_features + 1;
> +	/* efv->io_functionality[0] is not used! pins are in 1..31 range */
> +	efv->io_functionality = efv->io_support + k - 1;
> +	efv->active_state = efv->io_functionality + n + 1;
> +
> +	if ((void *)&efv->active_state[k] > mem_end) {
> +		dev_dbg(eci->dev, "I/O support bytes points out of memory\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Last part of block */
> +	for (i = 0; i < k; i++)
> +		dev_dbg(eci->dev, "active_state[%d] 0x%02x\n", i,
> +				efv->active_state[i]);
> +
> +	eci->buttons_data.buttons_up_mask =
> +		~(u32)(cpu_to_le32(*(u32 *)efv->active_state));

Hmm... you need to properly annotate all members that are not in cpu
endianness.

> +	dev_dbg(eci->dev, "buttons mask 0x%08x\n",
> +			eci->buttons_data.buttons_up_mask);
> +
> +	/*
> +	 * ECI accessory responces as many bytes needed for used I/O pins
> +	 * up to four bytes, when lines 24..31 are used
> +	 * all tested ECI accessories how ever return two data bytes
> +	 * event though there are less than eight I/O pins
> +	 *
> +	 * so we get alway reading error if there are less than eight I/Os
> +	 * meanwhile just use this kludge, FIXME
> +	 */
> +	k = DIV_ROUND_UP(n + 1, 8);
> +	if (k > 4) {
> +		dev_dbg(eci->dev, "maximum port reg count is four\n");
> +		return -EINVAL;
> +	}
> +
> +	if (k == 1)
> +		k = 2;
> +	eci->port_reg_count = k;
> +
> +	return 0;
> +}
> +
> +static int eci_init_accessory(struct eci_data *eci)
> +{
> +	int ret, key = 0, restart = 0;
> +	unsigned long future;
> +
> +	eci->mem_ok = false;
> +
> +	if (!eci->eci_hw_ops)
> +		return -ENXIO;

Shouldn't you check this earlier, when registering the accessory?

> +
> +	ret = eci->eci_hw_ops->acc_reset();
> +	if (ret)
> +		return ret;
> +
> +	msleep(ECI_WAIT_BUS_SETTLE);
> +
> +	ret = eci->eci_hw_ops->acc_write_reg(ECICMD_MIC_CTRL, ECI_MIC_OFF);
> +	if (ret) {
> +		dev_dbg(eci->dev, "unable to turn ECI mic off\n");
> +		return ret;
> +	}
> +
> +	/* Get ECI ekey block to determine memory size */
> +	future = jiffies + msecs_to_jiffies(ECI_TRY_GET_MEMORY);
> +	do {
> +		ret = eci_get_ekey(eci, &key);
> +		if (time_is_before_jiffies(future))
> +			break;
> +	} while (ret);

So why do you need the retries? How often does the device go out for
lunch?

> +
> +	if (ret) {
> +		dev_dbg(eci->dev, "can't read ECI memory ekey block\n");
> +		return ret;
> +	}
> +
> +	eci->mem_size = key;
> +	if (eci->mem_size > ECI_MAX_MEM_SIZE) {
> +		dev_dbg(eci->dev, "reported ECI memory size out of range\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Get ECI memory */
> +	future = jiffies + msecs_to_jiffies(ECI_TRY_GET_MEMORY);
> +	do {
> +		ret = eci_get_memory(eci, &restart);
> +		if (time_is_before_jiffies(future))
> +			break;
> +	} while (ret);
> +
> +	if (ret) {
> +		dev_dbg(eci->dev, "can't read ECI memory\n");
> +		return ret;
> +	}
> +
> +	if (eci_get_enchancement_features(eci))
> +		return -EIO;
> +
> +	if (eci_parse_enchancement_features(eci))
> +		return -EIO;
> +
> +	/*
> +	 * Now that enchancement features table has been parsed,
> +	 * we can configure ECI buttons.
> +	 */
> +	msleep(ECI_WAIT_BUS_SETTLE);
> +	future = jiffies + msecs_to_jiffies(ECI_TRY_INIT_IO);
> +	do {
> +		ret = eci_init_buttons(eci);
> +		if (time_is_before_jiffies(future))
> +			break;
> +	} while (ret);
> +
> +	if (ret) {
> +		dev_dbg(eci->dev, "can't init ECI buttons\n");
> +		return ret;
> +	}
> +
> +	eci->mem_ok = true;
> +	msleep(ECI_WAIT_BUS_SETTLE);
> +
> +	if (eci->eci_hw_ops->acc_write_reg(ECICMD_MIC_CTRL, eci->mic_state))
> +		dev_err(eci->dev, "Unable to control headset microphone\n");
> +
> +	return 0;
> +}
> +
> +/* Press/release accessory button(s) */
> +static int eci_get_button(struct eci_data *eci)
> +{
> +	struct enchancement_features_fixed *eff = eci->e_features_fix;
> +	struct eci_buttons_data *b = &eci->buttons_data;
> +
> +	if (!eci->mem_ok)
> +		return -ENXIO;
> +
> +	if (((b->buttons & b->buttons_up_mask) == 0) &&
> +			(eff->number_of_features > 2)) {
> +		dev_err(eci->dev, "ECI report all buttons down, rejected\n");
> +		return -EINVAL;
> +	}
> +
> +	if (b->windex < ECI_BUTTON_BUF_SIZE) {
> +		if (b->buttons_buf[b->windex] == 0)
> +			b->buttons_buf[b->windex] = b->buttons;
> +		else
> +			dev_err(eci->dev, "ECI button queue owerflow\n");
> +	}
> +	b->windex++;
> +	if (b->windex == ECI_BUTTON_BUF_SIZE)
> +		b->windex = 0;
> +
> +	return 0;
> +}
> +
> +/* Intended to use ONLY inside eci_parse_button() ! */
> +#define ACTIVE_STATE(x) (u32)(cpu_to_le32(*(u32 *)efv->active_state) & BIT(x-1))
> +#define BUTTON_STATE(x) ((buttons & BIT(x))>>1)
> +
> +static int eci_parse_button(struct eci_data *eci, u32 buttons)
> +{
> +	int pin, state;
> +	u8 n, io_fun;
> +	struct enchancement_features_variable *efv = &eci->e_features_var;
> +	struct enchancement_features_fixed *eff = eci->e_features_fix;
> +
> +	if (!eci->mem_ok)
> +		return -ENXIO;
> +
> +	n = eff->number_of_features;
> +
> +	for (pin = 1; pin <= n; pin++) {
> +		io_fun = efv->io_functionality[pin] & ~BIT(7);
> +		if (io_fun > ECI_KEY_MAX)
> +			break;
> +		state = (BUTTON_STATE(pin) == ACTIVE_STATE(pin));
> +		if (state)
> +			dev_dbg(eci->dev, "I/O functionality 0x%02x\n", io_fun);
> +
> +		sparse_keymap_report_event(eci->acc_input, io_fun, state,
> +				false);
> +	}
> +	input_sync(eci->acc_input);
> +
> +	return 0;
> +}
> +static int eci_send_button(struct eci_data *eci)
> +{
> +	int i;
> +	struct enchancement_features_fixed *eff = eci->e_features_fix;
> +	struct eci_buttons_data *b = &eci->buttons_data;
> +	u8 n;
> +
> +	if (!eci->mem_ok)
> +		return -ENXIO;
> +
> +	n = eff->number_of_features;
> +
> +	if (n > ECI_MAX_FEATURE_COUNT)
> +		return -EINVAL;
> +
> +	/* Let input system take care multiple key events */
> +	for (i = 0; i < ECI_BUTTON_BUF_SIZE; i++) {
> +		if (b->buttons_buf[b->rindex] == 0)
> +			break;
> +
> +		if (eci_parse_button(eci, b->buttons_buf[b->rindex]))
> +			return -ENXIO;
> +
> +		b->buttons_buf[b->rindex] = 0;
> +		b->rindex++;
> +		if (b->rindex == ECI_BUTTON_BUF_SIZE)
> +			b->rindex = 0;
> +	}
> +
> +	return 0;
> +}
> +
> +/* General work func (eci_ws) for several tasks */
> +static void eci_work(struct work_struct *ws)
> +{
> +	struct eci_data *eci;
> +	int ret;
> +
> +	eci = container_of((struct delayed_work *)ws, struct eci_data, eci_ws);

No, please do not case struct work_struct to struct delayed_work. Use

	eci = container_of(ws, struct eci_data, eci_ws.work);

> +
> +	ret = eci_send_button(eci);
> +	if (ret)
> +		dev_err(eci->dev, "Error sending event\n");
> +}
> +
> +/* This is called from platform audio driver when microphone routings changes */
> +static void eci_hsmic_event(void *priv, bool on)

eci_hsmic_control() would probably be better.

> +{
> +	struct eci_data *eci = priv;
> +	unsigned long future;
> +	int ret;
> +
> +	if (!eci)
> +		return;

How can we lose eci?

> +
> +	if (!eci->plugged)
> +		return;
> +
> +	if (on)
> +		eci->mic_state = ECI_MIC_AUTO;
> +	else
> +		eci->mic_state = ECI_MIC_OFF;


	eci->mix_state = on ? ECI_MIC_AUTO : ECI_MIC_OFF;

> +
> +	future = jiffies + msecs_to_jiffies(ECI_TRY_SET_MIC);
> +	do {
> +		ret = eci->eci_hw_ops->acc_write_reg(ECICMD_MIC_CTRL,
> +				eci->mic_state);
> +		if (time_is_before_jiffies(future))
> +			break;
> +	} while (ret);

Hmm, is it in the spec that you have to retry every operation for sevral
times until it "stick"?

> +
> +	if (ret)
> +		dev_err(eci->dev, "Unable to control headset microphone\n");
> +}
> +
> +/*
> + * Other driver(s) can call this after registering themselves using
> + * eci_register()
> + */
> +static void eci_accessory_event(int event, void *priv)
> +{
> +	struct eci_data *eci = priv;
> +	struct eci_buttons_data *b = &eci->buttons_data;
> +	int delay = 0;
> +	int ret = 0;
> +
> +	eci->event = event;
> +	switch (event) {
> +	case ECI_EVENT_IS_ECI:
> +		eci->is_eci = true;
> +		ret = eci->eci_hw_ops->acc_reset();
> +		if (ret)
> +			eci->is_eci = false;
> +		break;
> +	case ECI_EVENT_PLUG_IN:
> +		eci->first_event = true;
> +		ret = eci_init_accessory(eci);
> +		if (ret < 0)
> +			ret = eci_init_accessory(eci);
> +		if (ret) {
> +			dev_err(eci->dev, "Accessory init %s%s%s%s\n",
> +					ret & ACI_COMMERR ? "COMMERR " : "",
> +					ret & ACI_FRAERR ? "FRAERR " : "",
> +					ret & ACI_RESERR ? "RESERR " : "",
> +					ret & ACI_COLL ? "COLLERR " : "");
> +			break;
> +		}
> +		break;
> +	case ECI_EVENT_PLUG_OUT:
> +		/* send all buttons up as last event */
> +		b->buttons = b->buttons_up_mask;
> +		eci_get_button(eci);
> +		eci_send_button(eci);
> +		eci->mem_ok = false;

Instead of checking mem_ok everywhere maybe you should simply unregister
the device? We already have bind/unbind in sysfs to do just that.

> +		break;
> +	case ECI_EVENT_BUTTON:
> +		/*
> +		 * First event might not be valid due plug insertion
> +		 * so we filter it out if it seems garbage
> +		 */
> +		if (eci->first_event) {
> +			eci->first_event = false;
> +			if ((b->buttons & 0xff) == 0)
> +				break;
> +		}
> +		eci_get_button(eci);
> +		delay = msecs_to_jiffies(ECI_WAIT_SEND_BUTTON);
> +		schedule_delayed_work(&eci->eci_ws, delay);

Why do you need to use work? I traced through the calls and it simply
reports events through input subsystem which can be called from atomic
contexts.

Also, do we really need to have this demultiplexor? Can't we have 4
functions doing one thing and doing it well?

> +		break;
> +	default:
> +		dev_err(eci->dev, "Unknown accessory event %d\n", event);
> +		break;
> +	}
> +
> +	return;
> +}
> +
> +static void __eci_disable(struct eci_data *eci)
> +{
> +	/* Disconnect ECI accessory's microphone */
> +	eci_hsmic_event(eci, false);
> +}
> +
> +static void __eci_enable(struct eci_data *eci)
> +{
> +	/* ECI accessory's microphone into auto mode */
> +	eci_hsmic_event(eci, true);
> +}
> +
> +void eci_suspend(struct eci_data *eci)
> +{
> +	mutex_lock(&eci->mutex);
> +
> +	if (!eci->suspended && eci->opened)
> +		__eci_disable(eci);
> +
> +	eci->suspended = true;
> +
> +	mutex_unlock(&eci->mutex);
> +}
> +EXPORT_SYMBOL(eci_suspend);
> +
> +void eci_resume(struct eci_data *eci)
> +{
> +	mutex_lock(&eci->mutex);
> +
> +	if (eci->suspended && eci->opened)
> +		__eci_enable(eci);
> +
> +	eci->suspended = false;
> +
> +	mutex_unlock(&eci->mutex);
> +}
> +EXPORT_SYMBOL(eci_resume);
> +
> +/*
> + * sysfs entries:
> + * memory	R	ECI accessory memory content
> + * cable	RW	accessory plugged/unplugged 0/1
> + */
> +static ssize_t show_eci_memory(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	struct eci_data *eci = the_eci;

You should be able to access eci structure through dev_get_drvdata()
instead of relying on global.

> +
> +	if (!eci->mem_ok)
> +		return -ENXIO;
> +
> +	memcpy(buf, eci->memory, eci->mem_size);
> +
> +	return eci->mem_size;
> +}
> +
> +static ssize_t show_cable_plugged(struct device *dev,
> +		struct device_attribute *attr, char *buf)
> +{
> +	struct eci_data *eci = the_eci;
> +
> +	return snprintf(buf, sizeof(buf), "%d\n", eci->plugged);
> +}
> +
> +static ssize_t store_cable_plugged(struct device *dev,
> +		struct device_attribute *attr,
> +		const char *buf, size_t len)
> +{
> +	struct eci_data *eci = the_eci;
> +	long unsigned int tmp;
> +
> +	if (strict_strtoul(buf, 0, &tmp))
> +		return -EINVAL;
> +
> +	eci->plugged = !!tmp;
> +	if (eci->plugged)
> +		eci_accessory_event(ECI_EVENT_PLUG_IN, eci);
> +	else
> +		eci_accessory_event(ECI_EVENT_PLUG_OUT, eci);
> +
> +	return len;
> +}
> +
> +static DEVICE_ATTR(memory, S_IRUGO, show_eci_memory, NULL);
> +static DEVICE_ATTR(cable, S_IRUGO | S_IWUSR , show_cable_plugged,
> +		store_cable_plugged);
> +
> +static struct attribute *eci_attributes[] = {
> +	&dev_attr_memory.attr,
> +	&dev_attr_cable.attr,
> +	NULL
> +};
> +
> +static struct attribute_group eci_attr_group = {
> +	.attrs = eci_attributes
> +};
> +
> +static int eci_input_open(struct input_dev *input)
> +{
> +	struct eci_data *eci = the_eci;

	struct eci_data *eci = input_get_drvdata(input);

> +
> +	mutex_lock(&eci->mutex);
> +
> +	if (!eci->suspended)
> +		__eci_enable(eci);
> +
> +	eci->opened = true;
> +
> +	mutex_unlock(&eci->mutex);
> +
> +	return 0;
> +}
> +
> +static void eci_input_close(struct input_dev *input)
> +{
> +	struct eci_data *eci = the_eci;
> +
> +	mutex_lock(&eci->mutex);
> +
> +	if (!eci->suspended)
> +		__eci_disable(eci);
> +
> +	eci->opened = false;
> +
> +	mutex_unlock(&eci->mutex);
> +}
> +
> +static int init_accessory_input(struct eci_data *eci)
> +{
> +	int err;
> +
> +	eci->acc_input = input_allocate_device();
> +	if (!eci->acc_input) {
> +		dev_err(eci->dev, "Error allocating input device\n");
> +		return -ENOMEM;
> +	}
> +
> +	eci->acc_input->name = "ECI Accessory";
> +	eci->acc_input->open = eci_input_open;
> +	eci->acc_input->close = eci_input_close;

You also need to set eci_acc_input->dev.parent to ensure we are in
proper place in sysfs tree.

> +
> +	input_set_drvdata(eci->acc_input, eci);
> +
> +	err = sparse_keymap_setup(eci->acc_input, eci_keymap, NULL);
> +	if (err)
> +		goto err_free_dev;
> +
> +	__set_bit(EV_REP, eci->acc_input->evbit);
> +
> +	err = input_register_device(eci->acc_input);
> +	if (err) {
> +		dev_err(eci->dev, "Error registering input device\n");
> +		goto err_free_keymap;
> +	}
> +
> +	/* Must set after input_register_device() to take effect */
> +	eci->acc_input->rep[REP_PERIOD] = ECI_KEY_REPEAT_INTERVAL;
> +
> +	return 0;
> +
> +err_free_keymap:
> +	sparse_keymap_free(eci->acc_input);
> +err_free_dev:
> +	input_free_device(eci->acc_input);
> +	return err;
> +}
> +
> +struct eci_cb *eci_register(struct device *dev, struct eci_hw_ops *eci_ops)
> +{
> +	struct eci_data *eci;
> +	int ret;
> +
> +	eci = kzalloc(sizeof(*eci), GFP_KERNEL);
> +	if (!eci)
> +		return ERR_PTR(-ENOMEM);
> +
> +	eci->dev = dev;
> +
> +	the_eci = eci;
> +
> +	if (!eci_ops || !eci_ops->acc_read_direct ||
> +			!eci_ops->acc_read_reg || !eci_ops->acc_write_reg ||
> +			!eci_ops->acc_reset ||
> +			!eci_ops->register_hsmic_event_cb)
> +		return ERR_PTR(-EINVAL);
> +
> +	eci->eci_hw_ops = eci_ops;
> +	/*
> +	 * If platform machine has audio driver providing
> +	 * register_hsmic_event_cb, we should give accessory microphone control,
> +	 * ie. eci_hsmic_event to it.
> +	 * This way audio driver get control to ECI accessory microphone and
> +	 * we can save power
> +	 */
> +	if (eci_ops->register_hsmic_event_cb) {
> +		hsmic_event.private	= eci;
> +		hsmic_event.event	= eci_hsmic_event;
> +		eci_ops->register_hsmic_event_cb(&hsmic_event);
> +	}
> +
> +	mutex_init(&eci->mutex);
> +
> +	eci_callback.event              = eci_accessory_event;
> +	eci_callback.priv               = eci;
> +
> +	/* /sys/bus/i2c/devices/<adapter>-<address> */
> +	ret = sysfs_create_group(&dev->kobj, &eci_attr_group);
> +	if (ret) {
> +		dev_err(eci->dev, "Could not create sysfs entries\n");
> +		goto err_sysfs;
> +	}
> +
> +	ret = init_accessory_input(eci);
> +	if (ret) {
> +		dev_err(eci->dev, "ERROR initializing accessory input\n");
> +		goto err_input;
> +	}
> +
> +	init_waitqueue_head(&eci->wait);
> +	INIT_DELAYED_WORK(&eci->eci_ws, eci_work);
> +
> +	eci->plugged = 0;
> +	eci->mem_ok = false;
> +	/*
> +	 * By default ECI driver leaves microphone off, to save power.
> +	 * Audio driver can set microphone on by using
> +	 * hsmic_event.event
> +	 */
> +	eci->mic_state = ECI_MIC_OFF;
> +
> +	/* Init buttons_data indexes and buffer */
> +	memset(&eci->buttons_data, 0, sizeof(struct eci_buttons_data));
> +	eci->buttons_data.buttons = 0xffffffff;
> +
> +	return &eci_callback;
> +
> +err_input:
> +	sysfs_remove_group(&dev->kobj, &eci_attr_group);
> +
> +err_sysfs:
> +	kfree(eci);
> +
> +	return ERR_PTR(-EBUSY);
> +}
> +EXPORT_SYMBOL(eci_register);
> +
> +int eci_remove(struct eci_data *eci)
> +{
> +	eci->eci_hw_ops->register_hsmic_event_cb(NULL);
> +	cancel_delayed_work_sync(&eci->eci_ws);
> +	sysfs_remove_group(&eci->dev->kobj, &eci_attr_group);
> +	input_unregister_device(eci->acc_input);
> +	kfree(eci);
> +
> +	return 0;
> +}
> +EXPORT_SYMBOL(eci_remove);
> +
> +MODULE_ALIAS("i2c:" ECI_DRIVERNAME);
> +MODULE_AUTHOR("Nokia Corporation");
> +MODULE_DESCRIPTION("ECI accessory driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/input/misc/eci_at20-i2c.c b/drivers/input/misc/eci_at20-i2c.c
> new file mode 100644
> index 0000000..9f9bf53
> --- /dev/null
> +++ b/drivers/input/misc/eci_at20-i2c.c
> @@ -0,0 +1,713 @@
> +/*
> + * This file is part of ECI (Enhancement Control Interface) controller
> + * driver
> + *
> + * Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Tapio Vihuri <tapio.vihuri@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *
> + */
> +
> +/*
> + * ECI stands for (Enhancement Control Interface).
> + *
> + * ECI is better known as Multimedia Headset for Nokia phones.
> + * If headset has many buttons, like play, vol+, vol- etc. then it is propably
> + * ECI accessory.
> + *
> + * ECI controller is kind of bridge between host CPU I2C and ECI accessory
> + * ECI communication.
> + */
> +
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/gpio.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +#include <linux/i2c.h>
> +#include <linux/delay.h>
> +#include <linux/debugfs.h>
> +#include <linux/input/eci.h>
> +
> +#define DRIVER_NAME	"eci_ctrl"
> +
> +#define ECICTRL_STATUS_DATA_READY	0x01
> +#define ECICTRL_STATUS_ACCESSORY_INT	0x02
> +
> +#define ECICTRL_WAIT_IRQ		100	/* msec */
> +#define ECI_RST_MIN		62
> +#define ECI_RST_WAIT		10	/* msec */
> +
> +struct eci_at20_data {
> +	struct device		*dev;
> +	struct eci_cb		*eci_callback;
> +	int			eci_rst_gpio;
> +	int			eci_sw_ctrl_gpio;
> +	int			eci_int_gpio;
> +	wait_queue_head_t	wait;
> +	bool			wait_eci_buttons;
> +	bool			wait_data;
> +};
> +
> +static struct eci_at20_data *the_ed;
> +
> +/* For eci_at20 controller internal registers */
> +static int eci_at20_read_reg(u8 reg)
> +{
> +	struct i2c_client *client = to_i2c_client(the_ed->dev);
> +
> +	if (reg <= ECICMD_RESERVED)
> +		return -EINVAL;
> +
> +	return i2c_smbus_read_byte_data(client, reg);
> +}
> +
> +static int eci_at20_write_reg(u8 reg, u8 param)
> +{
> +	struct i2c_client *client = to_i2c_client(the_ed->dev);
> +
> +	if (reg <= ECICMD_RESERVED)
> +		return -EINVAL;
> +
> +	return i2c_smbus_write_byte_data(client, reg, param);
> +}
> +
> +/*
> + * Struct eci_data is ECI input driver (dealing ECI accessories) data.
> + * Struct eci_at20_data is this driver data, dealing just ECI communication.
> + * Global eci_register() pairs structs so that we can call ECI input driver
> + * event function with eci_data
> + */
> +static void eci_at20_emit_buttons(struct eci_at20_data *ed, bool force_up)
> +{
> +	struct eci_data *eci = ed->eci_callback->priv;
> +	struct eci_buttons_data *b = &eci->buttons_data;
> +
> +	if (force_up)
> +		b->buttons = b->buttons_up_mask;
> +
> +	ed->eci_callback->event(ECI_EVENT_BUTTON, eci);
> +}
> +
> +/* Trigger ECI accessory register data write (from accessory) */
> +static int eci_fire_acc_read_reg(u8 reg, int count)
> +{
> +	struct i2c_client *client = to_i2c_client(the_ed->dev);
> +
> +	if (!eci_at20_write_reg(ECIREG_READ_COUNT, count))
> +		return i2c_smbus_read_byte_data(client, reg);
> +	else
> +		return -EIO;
> +}
> +
> +/* For ECI accessory internal registers */
> +static int eci_acc_read_reg(u8 reg, u8 *buf, int count)
> +{
> +	s32 ret;
> +	int i;
> +
> +	if (reg > ECICMD_RESERVED)
> +		return -EINVAL;
> +
> +	the_ed->wait_data = false;
> +	if (eci_fire_acc_read_reg(reg, count))
> +		return -EIO;
> +
> +	if (!wait_event_timeout(the_ed->wait, the_ed->wait_data == true,
> +				msecs_to_jiffies(ECICTRL_WAIT_IRQ)))
> +		return -EIO;
> +
> +	for (i = 0; i < count; i++) {
> +		ret = eci_at20_read_reg(ECIREG_READ_DIRECT + i);
> +		if (ret < 0)
> +			return ret;
> +
> +		buf[i] = ret;
> +	}
> +
> +	return 0;
> +}
> +
> +/* ECI accessory register write */
> +static int eci_acc_write_reg(u8 reg, u8 param)
> +{
> +	struct i2c_client *client = to_i2c_client(the_ed->dev);
> +
> +	if (reg > ECICMD_RESERVED)
> +		return -EINVAL;
> +
> +	return i2c_smbus_write_byte_data(client, reg, param);
> +}

How much of this code is actually generic vs. being controller specific?

> +
> +/*
> + * debugfs entries:
> + * reset	RW	ECI controller reset line
> + * button	W	fake button data
> + * debug	RW	ECI controller test register
> + * mic		RW	accessory's microphone auto/on/off
> + */
> +#ifdef CONFIG_DEBUG_FS
> +static struct dentry *eci_at20_debugfs_dir;
> +
> +static ssize_t reset_read(struct file *file, char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	struct eci_at20_data *ed = file->private_data;
> +	char buf[80];
> +	int len = 0;
> +	int ret;
> +
> +	if (*ppos == 0) {
> +		ret = !!gpio_get_value(ed->eci_rst_gpio);
> +		len = snprintf(buf, sizeof(buf), "%d\n", ret);
> +	}
> +	ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
> +
> +	return ret;
> +}
> +
> +static ssize_t reset_write(struct file *file, const char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	/* Assosiated in default_open() */
> +	struct eci_at20_data *ed = file->private_data;
> +	char buf[32];
> +	int buf_size;
> +
> +	buf_size = min(count, (sizeof(buf)-1));
> +	if (copy_from_user(buf, user_buf, buf_size))
> +		return -EFAULT;
> +
> +	if (!memcmp(buf, "0", 1))
> +		gpio_set_value(ed->eci_rst_gpio, 0);
> +	else if (!memcmp(buf, "1", 1))
> +		gpio_set_value(ed->eci_rst_gpio, 1);
> +
> +	return count;
> +}
> +
> +static ssize_t button_write(struct file *file, const char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	/* Assosiated in default_open() */
> +	struct eci_at20_data *ed = file->private_data;
> +	struct eci_data *eci = ed->eci_callback->priv;
> +	struct eci_buttons_data *b = &eci->buttons_data;
> +	char buf[32];
> +	int buf_size, ret;
> +	unsigned long val;
> +
> +	buf_size = min(count, (sizeof(buf)-1));
> +	if (copy_from_user(buf, user_buf, buf_size))
> +		return -EFAULT;
> +
> +	ret = strict_strtoul(buf, 0, &val);
> +	if (ret)
> +		return ret;
> +
> +	b->buttons = val;
> +	eci_at20_emit_buttons(ed, ECI_REAL_BUTTONS);
> +
> +	return count;
> +}
> +
> +static ssize_t debug_read(struct file *file, char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	char buf[80];
> +	int len = 0;
> +	int ret;
> +
> +	if (*ppos == 0) {
> +		ret = eci_at20_read_reg(ECIREG_TEST_IN);
> +		if (ret < 0)
> +			return ret;
> +		len += snprintf(buf + len, sizeof(buf) - len, "%02x\n", ret);
> +	}
> +
> +	ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
> +
> +	return ret;
> +}
> +
> +static ssize_t debug_write(struct file *file, const char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	char buf[80];
> +	int buf_size;
> +	unsigned long val;
> +
> +	buf_size = min(count, (sizeof(buf)-1));
> +	if (copy_from_user(buf, user_buf, buf_size))
> +		return -EFAULT;
> +
> +	buf[buf_size] = '\0';
> +	if (!strict_strtoul(buf, 0, &val))
> +		eci_at20_write_reg(ECIREG_TEST_OUT, val);
> +	else
> +		return -EINVAL;
> +
> +	return count;
> +}
> +
> +static ssize_t mic_read(struct file *file, char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	/* Assosiated in default_open() */
> +	struct eci_at20_data *ed = file->private_data;
> +	struct eci_data *eci = ed->eci_callback->priv;
> +	char buf[80], *state;
> +	int len = 0;
> +	int ret;
> +
> +	if (!eci->mem_ok)
> +		return -ENODEV;
> +
> +	/* Do not run twice */
> +	if (*ppos == 0) {
> +		ret = eci_acc_read_reg(ECICMD_MIC_CTRL, buf, 1);
> +		if (ret)
> +			return ret;
> +
> +		eci->mic_state = buf[0];
> +		switch (eci->mic_state) {
> +		case ECI_MIC_AUTO:
> +			state = "auto";
> +			break;
> +		case ECI_MIC_OFF:
> +			state = "off";
> +			break;
> +		case ECI_MIC_ON:
> +			state = "on";
> +			break;
> +		default:
> +			state = "unknown";
> +			break;
> +		}
> +
> +		len = snprintf(buf, sizeof(buf), "microphone %s\n", state);
> +	}
> +
> +	ret = simple_read_from_buffer(user_buf, count, ppos, buf, len);
> +
> +	return ret;
> +}

Is this really controller specific? I'd expect you could move most
(all?) debugfs into core.

This should simplify the dirver as I expect it will allow you to get rid
of most of your "callbacks".

> +
> +static ssize_t mic_write(struct file *file, const char __user *user_buf,
> +		size_t count, loff_t *ppos)
> +{
> +	/* Assosiated in default_open() */
> +	struct eci_at20_data *ed = file->private_data;
> +	struct eci_data *eci = ed->eci_callback->priv;
> +	char buf[80];
> +	int buf_size;
> +
> +	buf_size = min(count, (sizeof(buf) - 1));
> +	if (copy_from_user(buf, user_buf, buf_size))
> +		return -EFAULT;
> +
> +	if (!memcmp(buf, "auto", 4))
> +		eci->mic_state = ECI_MIC_AUTO;
> +	else if (!memcmp(buf, "off", 3))
> +		eci->mic_state = ECI_MIC_OFF;
> +	else if (!memcmp(buf, "on", 2))
> +		eci->mic_state = ECI_MIC_ON;
> +
> +	if (eci_acc_write_reg(ECICMD_MIC_CTRL, eci->mic_state))
> +		dev_err(eci->dev, "Unable to control headset microphone\n");
> +
> +	return count;
> +}
> +
> +static int default_open(struct inode *inode, struct file *file)
> +{
> +	/* Assosiated in debugfs_create_file() */
> +	if (inode->i_private)
> +		file->private_data = inode->i_private;
> +
> +	return 0;
> +}
> +
> +static const struct file_operations reset_fops = {
> +	.open	= default_open,
> +	.read	= reset_read,
> +	.write	= reset_write,
> +};
> +
> +static const struct file_operations button_fops = {
> +	.open	= default_open,
> +	.write	= button_write,
> +};
> +
> +static const struct file_operations debug_fops = {
> +	.open	= default_open,
> +	.read	= debug_read,
> +	.write	= debug_write,
> +};
> +
> +static const struct file_operations mic_fops = {
> +	.open	= default_open,
> +	.read	= mic_read,
> +	.write	= mic_write,
> +};
> +
> +static void eci_at20_uninitialize_debugfs(void)
> +{
> +	if (eci_at20_debugfs_dir)
> +		debugfs_remove_recursive(eci_at20_debugfs_dir);
> +}
> +
> +static long eci_at20_initialize_debugfs(struct eci_at20_data *ed)
> +{
> +	void *ok;
> +
> +	/* /sys/kernel/debug/eci_ctrl */
> +	eci_at20_debugfs_dir = debugfs_create_dir(ed->dev->driver->name, NULL);
> +	if (!eci_at20_debugfs_dir)
> +		return -ENOENT;
> +
> +	/* Struct ed assosiated to inode->i_private */
> +	ok = debugfs_create_file("reset", S_IRUGO | S_IWUSR,
> +			eci_at20_debugfs_dir, ed, &reset_fops);
> +	if (!ok)
> +		goto fail;
> +
> +	ok = debugfs_create_file("button", S_IWUSR,
> +			eci_at20_debugfs_dir, ed, &button_fops);
> +	if (!ok)
> +		goto fail;
> +
> +	ok = debugfs_create_file("debug", S_IRUGO,
> +			eci_at20_debugfs_dir, ed, &debug_fops);
> +	if (!ok)
> +		goto fail;
> +
> +	ok = debugfs_create_file("mic", S_IRUGO | S_IWUSR,
> +			eci_at20_debugfs_dir, ed, &mic_fops);
> +	if (!ok)
> +		goto fail;
> +
> +	return 0;
> +fail:
> +	eci_at20_uninitialize_debugfs();
> +	return -ENOENT;
> +}
> +#else
> +#define eci_at20_initialize_debugfs(ed)	1
> +#define eci_at20_uninitialize_debugfs()
> +#endif
> +
> +/* Reset and learn ECI accessory, ie. get speed */
> +static int eci_acc_reset(void)
> +{
> +	s32 ret;
> +
> +	eci_at20_write_reg(ECIREG_RST_LEARN, 0);
> +
> +	msleep(ECI_RST_WAIT);
> +
> +	ret = eci_at20_read_reg(ECIREG_RST_LEARN);
> +	if (ret < ECI_RST_MIN)
> +		return -EIO;
> +
> +	return 0;
> +}
> +
> +/* Read always four bytes, as stated in ECI specification */
> +static int eci_acc_read_direct(u8 addr, char *buf)
> +{
> +	s32 ret;
> +	int i;
> +
> +	/* Initiate ECI accessory memory read */
> +	the_ed->wait_data = false;
> +	if (!eci_at20_write_reg(ECIREG_READ_COUNT, 4))
> +		if (eci_at20_write_reg(ECIREG_READ_DIRECT, addr))
> +			return -EIO;
> +
> +	if (!wait_event_timeout(the_ed->wait, the_ed->wait_data == true,
> +				msecs_to_jiffies(ECICTRL_WAIT_IRQ)))
> +		return -EIO;
> +
> +	for (i = 0; i < 4; i++) {
> +		ret = eci_at20_read_reg(ECIREG_READ_DIRECT + i);
> +		if (ret < 0)
> +			return ret;
> +		buf[i] = ret;
> +		usleep_range(2000, 10000);
> +	}
> +	return 0;
> +}
> +
> +static void eci_at20_get_buttons(u8 *buf, u8 count)
> +{
> +	int i, ret;
> +
> +	if (count > 4) {
> +		dev_err(the_ed->dev, "Maximum four bytes allowed\n");
> +		return;
> +	}
> +
> +	for (i = 0; i <= count; i++) {
> +		ret = eci_at20_read_reg(ECIREG_READ_DIRECT + i);
> +		buf[i] = ret;
> +	}
> +}
> +
> +static irqreturn_t eci_at20_irq_handler(int irq, void *_ed)
> +{
> +	struct eci_at20_data *ed = _ed;
> +	struct eci_data *eci = ed->eci_callback->priv;
> +	struct eci_buttons_data *b = &eci->buttons_data;
> +	int status;
> +	char buf[4];
> +
> +	/* Clears eci_at20 DATA interrupt */
> +	status = eci_at20_read_reg(ECIREG_STATUS);
> +
> +	if (status & ECICTRL_STATUS_DATA_READY) {
> +		/*
> +		 * Buttons are special case as we want be fast with them
> +		 * and this way we cope with nested button and data interrupts
> +		 * The number of bytes needed to read is parsed in ECI
> +		 * input driver, based on data in ECI accessory.
> +		 * Maximum four bytes.
> +		 */
> +		if (ed->wait_eci_buttons) {
> +			eci_at20_get_buttons(buf, eci->port_reg_count);
> +			b->buttons = cpu_to_le32(*(u32 *)buf);
> +			eci_at20_emit_buttons(ed, ECI_REAL_BUTTONS);
> +			ed->wait_eci_buttons = false;
> +		}
> +		/* Complete ECI data reading */
> +		ed->wait_data = true;
> +		wake_up(&ed->wait);
> +	}
> +
> +	/* Accessory interrupt, ie. button pressed */
> +	if (status & ECICTRL_STATUS_ACCESSORY_INT) {
> +		if (eci->mem_ok) {
> +			eci_fire_acc_read_reg(ECICMD_PORT_DATA_0, 2);
> +			ed->wait_eci_buttons = true;
> +		}
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static struct eci_at20_data *eci_at20_initialize(struct device *dev)
> +{
> +	struct eci_at20_data *ed;
> +	struct eci_platform_data *pd = dev->platform_data;
> +	int ret;
> +
> +	if (!pd) {
> +		dev_err(dev, "platform_data not available\n");
> +		return ERR_PTR(-EINVAL);
> +	}
> +
> +	ed = kzalloc(sizeof(*ed), GFP_KERNEL);
> +	if (!ed)
> +		return ERR_PTR(-ENOMEM);
> +
> +	ed->dev = dev;
> +	ed->eci_rst_gpio = pd->eci_rst_gpio;
> +	ed->eci_sw_ctrl_gpio = pd->eci_sw_ctrl_gpio;
> +	ed->eci_int_gpio = pd->eci_int_gpio;
> +
> +	if (ed->eci_rst_gpio == 0 || ed->eci_sw_ctrl_gpio == 0 ||
> +			ed->eci_int_gpio == 0) {
> +		ret = -ENXIO;
> +		goto gpio_err;
> +	}
> +
> +	the_ed = ed;
> +
> +	ret = eci_at20_initialize_debugfs(ed);
> +	if (ret)
> +		dev_err(dev, "could not create debugfs entries\n");
> +
> +	ret = gpio_request(ed->eci_rst_gpio, "ECI_RSTn");
> +	if (ret) {
> +		dev_err(dev, "could not request ECI_RSTn gpio %d\n",
> +				ed->eci_rst_gpio);
> +		goto rst_gpio_err;
> +	}
> +
> +	gpio_direction_output(ed->eci_rst_gpio, 0);
> +	gpio_set_value(ed->eci_rst_gpio, 1);
> +
> +	ret = gpio_request(ed->eci_sw_ctrl_gpio, "ECI_SW_CTRL");
> +	if (ret) {
> +		dev_err(dev, "could not request ECI_SW_CTRL gpio %d\n",
> +				ed->eci_sw_ctrl_gpio);
> +		goto sw_ctrl_gpio_err;
> +	}
> +
> +	gpio_direction_input(ed->eci_sw_ctrl_gpio);
> +
> +	ret = gpio_request(ed->eci_int_gpio, "ECI_INT");
> +	if (ret) {
> +		dev_err(dev, "could not request ECI_INT gpio %d\n",
> +				ed->eci_int_gpio);
> +		goto int_gpio_err;
> +	}
> +
> +	gpio_direction_input(ed->eci_int_gpio);
> +
> +	ret = request_threaded_irq(gpio_to_irq(ed->eci_int_gpio), NULL,
> +			eci_at20_irq_handler, IRQF_TRIGGER_RISING,
> +			"ECI_INT", ed);
> +	if (ret) {
> +		dev_err(dev, "could not request irq %d\n",
> +				gpio_to_irq(ed->eci_int_gpio));
> +		goto int_irq_err;
> +	}
> +
> +	init_waitqueue_head(&ed->wait);
> +
> +	return ed;
> +
> +int_irq_err:
> +	gpio_free(ed->eci_int_gpio);
> +int_gpio_err:
> +	gpio_free(ed->eci_sw_ctrl_gpio);
> +sw_ctrl_gpio_err:
> +	gpio_set_value(ed->eci_rst_gpio, 0);
> +	gpio_free(ed->eci_rst_gpio);
> +rst_gpio_err:
> +	eci_at20_uninitialize_debugfs();
> +gpio_err:
> +	kfree(ed);
> +
> +	return ERR_PTR(ret);
> +}
> +
> +static struct eci_hw_ops eci_at20_hw_ops = {
> +	.acc_reset              = eci_acc_reset,
> +	.acc_read_direct        = eci_acc_read_direct,
> +	.acc_read_reg           = eci_acc_read_reg,
> +	.acc_write_reg          = eci_acc_write_reg,
> +};
> +
> +static int __devinit eci_at20_i2c_probe(struct i2c_client *client,
> +					const struct i2c_device_id *id)
> +{
> +	struct eci_at20_data *ed;
> +	struct eci_platform_data *pd = client->dev.platform_data;
> +
> +	if (!i2c_check_functionality(client->adapter,
> +				     I2C_FUNC_SMBUS_BYTE_DATA)) {
> +		dev_err(&client->dev, "SMBUS byte data not supported\n");
> +		return -EIO;
> +	}
> +
> +	ed = eci_at20_initialize(&client->dev);
> +
> +	if (IS_ERR(ed))
> +		return PTR_ERR(ed);
> +
> +	eci_at20_hw_ops.register_hsmic_event_cb = pd->register_hsmic_event_cb;
> +	/* Register itself to the ECI core */
> +	ed->eci_callback = eci_register(&client->dev, &eci_at20_hw_ops);
> +
> +	i2c_set_clientdata(client, ed);
> +
> +	return 0;
> +}
> +
> +static int __devexit eci_at20_remove(struct i2c_client *client)
> +{
> +	struct eci_at20_data *ed = i2c_get_clientdata(client);
> +	struct eci_data *eci = ed->eci_callback->priv;
> +
> +	eci_remove(eci);
> +
> +	gpio_set_value(ed->eci_rst_gpio, 0);
> +	gpio_free(ed->eci_rst_gpio);
> +
> +	gpio_free(ed->eci_sw_ctrl_gpio);
> +
> +	free_irq(gpio_to_irq(ed->eci_int_gpio), ed);
> +	gpio_free(ed->eci_int_gpio);
> +
> +	eci_at20_uninitialize_debugfs();
> +
> +	kfree(ed);
> +
> +	return 0;
> +}
> +
> +#ifdef	CONFIG_PM
> +static int eci_at20_suspend(struct i2c_client *client, pm_message_t message)
> +{
> +	struct eci_at20_data *ed = i2c_get_clientdata(client);
> +	struct eci_data *eci = ed->eci_callback->priv;
> +
> +	eci_suspend(eci);
> +
> +	return 0;
> +}
> +
> +static int eci_at20_resume(struct i2c_client *client)
> +{
> +	struct eci_at20_data *ed = i2c_get_clientdata(client);
> +	struct eci_data *eci = ed->eci_callback->priv;
> +
> +	eci_resume(eci);
> +
> +	return 0;
> +}
> +#else
> +#define	eci_at20_suspend	NULL
> +#define	eci_at20_resume		NULL
> +#endif
> +
> +static const struct i2c_device_id eci_id[] = {
> +	{ DRIVER_NAME, 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, eci_id);
> +
> +static struct i2c_driver eci_i2c_driver = {
> +	.driver = {
> +		.name	= DRIVER_NAME,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= eci_at20_i2c_probe,
> +	.remove		= __devexit_p(eci_at20_remove),
> +	.suspend	= eci_at20_suspend,
> +	.resume		= eci_at20_resume,
> +	.id_table	= eci_id,
> +};
> +
> +static int __init eci_at20_init(void)
> +{
> +	return i2c_add_driver(&eci_i2c_driver);
> +}
> +module_init(eci_at20_init);
> +
> +static void __devexit eci_at20_exit(void)
> +{
> +	i2c_del_driver(&eci_i2c_driver);
> +}
> +module_exit(eci_at20_exit);
> +
> +MODULE_DESCRIPTION("ECI accessory controller driver");
> +MODULE_AUTHOR("Nokia Corporation");
> +MODULE_ALIAS("i2c:eci_ctrl");
> +MODULE_LICENSE("GPL");
> diff --git a/include/linux/input/eci.h b/include/linux/input/eci.h
> new file mode 100644
> index 0000000..60b820e
> --- /dev/null
> +++ b/include/linux/input/eci.h
> @@ -0,0 +1,189 @@
> +/*
> + * This file is part of ECI (Enhancement Control Interface) driver
> + *
> + * Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies).
> + *
> + * Contact: Tapio Vihuri <tapio.vihuri@nokia.com>
> + *
> + * This program is free software; you can redistribute it and/or
> + * modify it under the terms of the GNU General Public License
> + * version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful, but
> + * WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
> + * General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program; if not, write to the Free Software
> + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
> + * 02110-1301 USA
> + *
> + */
> +#ifndef __ECI_H__
> +#define __ECI_H__
> +
> +#define ECI_MAX_MEM_SIZE	0x7c
> +#define ECI_BUTTON_BUF_SIZE	32
> +#define ECI_MAX_FEATURE_COUNT	31
> +
> +#define ACI_COMMERR	0x010
> +#define ACI_FRAERR	0x020
> +#define ACI_RESERR	0x040
> +#define ACI_COLL	0x080
> +
> +#define ECI_REAL_BUTTONS	0
> +#define ECI_FORCE_BUTTONS_UP	1
> +
> +/* ECI accessory register's bits */
> +#define ECI_MIC_AUTO	0x00
> +#define ECI_MIC_OFF	0x5a
> +#define ECI_MIC_ON	0xff
> +
> +/*
> + * VPROG2CNT - VPROG2 Control Register
> + * 2.5V | normal | normal
> + * 10   | 111    | 111
> + * 2.5V | off    | off
> + * 10   | 100    | 100
> + */
> +#define AvP_MSIC_VPROG2		0xd7
> +#define AvP_MSIC_VPROG2_2V5_ON	0xbf
> +#define AvP_MSIC_VPROG2_2V5_OFF 0xa4
> +
> +#define GPIO_ECI_RSTn		126	/* GP_CORE_030 + 96 */
> +#define GPIO_ECI_SW_CTRL	178	/* GP_CORE_082 + 96 */
> +#define GPIO_ECI_INT		16	/* GP_AON_016 */
> +
> +/* fixed in ECI HW, do not change */
> +enum {
> +	ECICMD_HWID,
> +	ECICMD_SWID,
> +	ECICMD_ECI_BUS_SPEED,
> +	ECICMD_MIC_CTRL,
> +	ECICMD_MASTER_INT_REG,
> +	ECICMD_HW_CONF_MEM_ACCESS,
> +	ECICMD_EXTENDED_MEM_ACCESS,
> +	ECICMD_INDIRECT_MEM_ACCESS,
> +	ECICMD_PORT_DATA_0,
> +	ECICMD_PORT_DATA_1,
> +	ECICMD_PORT_DATA_2,
> +	ECICMD_PORT_DATA_3,
> +	ECICMD_LATCHED_PORT_DATA_0,
> +	ECICMD_LATCHED_PORT_DATA_1,
> +	ECICMD_LATCHED_PORT_DATA_2,
> +	ECICMD_LATCHED_PORT_DATA_3,
> +	ECICMD_DATA_DIR_0,
> +	ECICMD_DATA_DIR_1,
> +	ECICMD_DATA_DIR_2,
> +	ECICMD_DATA_DIR_3,
> +	ECICMD_INT_CONFIG_0_LOW,
> +	ECICMD_INT_CONFIG_0_HIGH,
> +	ECICMD_INT_CONFIG_1_LOW,
> +	ECICMD_INT_CONFIG_1_HIGH,
> +	ECICMD_INT_CONFIG_2_LOW,
> +	ECICMD_INT_CONFIG_2_HIGH,
> +	ECICMD_INT_CONFIG_3_LOW,
> +	ECICMD_INT_CONFIG_3_HIGH,
> +	/*
> +	 * 0x1c - 0x2f reserved for future
> +	 * 0x30 - 0x3d reserved
> +	 */
> +	ECICMD_EEPROM_LOCK = 0x3e,
> +	ECICMD_RESERVED,	/* 0x3f */
> +	ECIREG_STATUS,		/* 0x40 */
> +	ECIREG_READ_COUNT,	/* 0x41 */
> +	ECIREG_BUF_COUNT,	/* 0x42 */
> +	ECIREG_RST_LEARN,	/* 0x43 */
> +	/* 0x44 - 0xdf as data buffer */
> +	ECIREG_READ_DIRECT,	/* 0x44 */
> +	ECIREG_HW_ID = 0xe0,	/* 0xe0 */
> +	ECIREG_FW_ID,		/* 0xe1 */
> +	ECIREG_TEST_IN,		/* 0xe2 */
> +	ECIREG_TEST_OUT,	/* 0xe3 */
> +};
> +
> +enum {
> +	ECI_EVENT_IS_ECI,
> +	ECI_EVENT_PLUG_IN,
> +	ECI_EVENT_PLUG_OUT,
> +	ECI_EVENT_BUTTON,
> +	ECI_EVENT_NO,
> +};
> +
> +struct audio_hsmic_event {
> +	void *private;
> +	void (*event)(void *priv, bool on);
> +};
> +
> +struct eci_hw_ops {
> +	int (*acc_reset)(void);
> +	int (*acc_read_direct)(u8 addr, char *buf);
> +	int (*acc_read_reg)(u8 reg, u8 *buf, int count);
> +	int (*acc_write_reg)(u8 reg, u8 param);
> +	void (*register_hsmic_event_cb)(struct audio_hsmic_event *);
> +};
> +
> +struct eci_cb {
> +	void *priv;
> +	void (*event)(int event, void *priv);
> +};
> +
> +struct enchancement_features_fixed {
> +	u8	block_id;
> +	u8	length;
> +	u8	connector_conf;
> +	u8	number_of_features;
> +};
> +
> +struct enchancement_features_variable {
> +	u8	*io_support;
> +	u8	*io_functionality;
> +	u8	*active_state;
> +};
> +
> +struct eci_buttons_data {
> +	u32	buttons;
> +	int	windex;
> +	int	rindex;
> +	u32	buttons_up_mask;
> +	u32	buttons_buf[ECI_BUTTON_BUF_SIZE];
> +};
> +
> +struct eci_data {
> +	struct device				*dev;
> +	struct delayed_work			eci_ws;
> +	wait_queue_head_t			 wait;
> +	struct input_dev			*acc_input;
> +	int					event;
> +	bool					first_event;
> +	bool					mem_ok;
> +	u16					mem_size;
> +	u8					memory[ECI_MAX_MEM_SIZE];
> +	struct enchancement_features_fixed	*e_features_fix;
> +	struct enchancement_features_variable	e_features_var;
> +	u8					port_reg_count;
> +	struct eci_buttons_data			buttons_data;
> +	struct eci_hw_ops			*eci_hw_ops;
> +	u8					mic_state;
> +	u8					plugged;
> +	bool					is_eci;
> +	struct mutex				mutex;
> +	bool					opened;
> +	bool					suspended;
> +};
> +
> +/* Exported functions */
> +void eci_suspend(struct eci_data *eci);
> +void eci_resume(struct eci_data *eci);
> +struct eci_cb *eci_register(struct device *dev, struct eci_hw_ops *eci_ops);
> +int eci_remove(struct eci_data *eci);
> +
> +/* eci paltform related data */
> +struct eci_platform_data {
> +	int	eci_rst_gpio;
> +	int	eci_sw_ctrl_gpio;
> +	int	eci_int_gpio;
> +	void	(*register_hsmic_event_cb)(struct audio_hsmic_event *);
> +};
> +#endif
> -- 
> 1.6.5
> 

Thanks.

-- 
Dmitry

  parent reply	other threads:[~2011-02-19  9:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-02-15 13:11 [PATCH v7 0/2] input: Add support for ECI (multimedia) accessories tapio.vihuri
2011-02-15 13:11 ` [PATCH v7 1/2] ECI: input: introduce ECI accessory input driver tapio.vihuri
2011-02-15 13:12   ` [PATCH v7 2/2] ECI: adding platform data for ECI driver tapio.vihuri
2011-02-19  9:22   ` Dmitry Torokhov [this message]
2011-02-21 10:28     ` [PATCH v7 1/2] ECI: input: introduce ECI accessory input driver Tapio Vihuri

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20110219092209.GA15014@core.coreip.homeip.net \
    --to=dmitry.torokhov@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=ilkka.koskinen@nokia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=peter.ujfalusi@nokia.com \
    --cc=randy.dunlap@oracle.com \
    --cc=samu.p.onkalo@nokia.com \
    --cc=tapio.vihuri@nokia.com \
    --subject='Re: [PATCH v7 1/2] ECI: input: introduce ECI accessory input driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).