LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device
@ 2011-02-08 2:43 Lars-Peter Clausen
2011-02-08 2:43 ` [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board Lars-Peter Clausen
2011-03-25 12:30 ` [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device Ralf Baechle
0 siblings, 2 replies; 4+ messages in thread
From: Lars-Peter Clausen @ 2011-02-08 2:43 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, linux-kernel, Lars-Peter Clausen
Register the gpio-charger device which reports whether device is currently
charging or not.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
arch/mips/jz4740/board-qi_lb60.c | 24 ++++++++++++++++++++++++
1 files changed, 24 insertions(+), 0 deletions(-)
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index 3e33264..e3f21ba 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -23,6 +23,7 @@
#include <linux/spi/spi_gpio.h>
#include <linux/power_supply.h>
#include <linux/power/jz4740-battery.h>
+#include <linux/power/gpio-charger.h>
#include <asm/mach-jz4740/jz4740_fb.h>
#include <asm/mach-jz4740/jz4740_mmc.h>
@@ -395,6 +396,28 @@ static struct platform_device qi_lb60_pwm_beeper = {
},
};
+/* charger */
+static char *qi_lb60_batteries[] = {
+ "battery",
+};
+
+static struct gpio_charger_platform_data qi_lb60_charger_pdata = {
+ .name = "usb",
+ .type = POWER_SUPPLY_TYPE_USB,
+ .gpio = JZ_GPIO_PORTD(28),
+ .gpio_active_low = 1,
+ .supplied_to = qi_lb60_batteries,
+ .num_supplicants = ARRAY_SIZE(qi_lb60_batteries),
+};
+
+static struct platform_device qi_lb60_charger_device = {
+ .name = "gpio-charger",
+ .dev = {
+ .platform_data = &qi_lb60_charger_pdata,
+ },
+};
+
+
static struct platform_device *jz_platform_devices[] __initdata = {
&jz4740_udc_device,
&jz4740_mmc_device,
@@ -409,6 +432,7 @@ static struct platform_device *jz_platform_devices[] __initdata = {
&jz4740_adc_device,
&qi_lb60_gpio_keys,
&qi_lb60_pwm_beeper,
+ &qi_lb60_charger_device,
};
static void __init board_gpio_setup(void)
--
1.7.2.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
2011-02-08 2:43 [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device Lars-Peter Clausen
@ 2011-02-08 2:43 ` Lars-Peter Clausen
2011-03-25 12:31 ` Ralf Baechle
2011-03-25 12:30 ` [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device Ralf Baechle
1 sibling, 1 reply; 4+ messages in thread
From: Lars-Peter Clausen @ 2011-02-08 2:43 UTC (permalink / raw)
To: Ralf Baechle; +Cc: linux-mips, linux-kernel, Lars-Peter Clausen
The jz4740 nand driver now requires that the ecc offsets are set.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
---
This should go into 2.6.38
---
arch/mips/jz4740/board-qi_lb60.c | 8 ++++----
1 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/mips/jz4740/board-qi_lb60.c b/arch/mips/jz4740/board-qi_lb60.c
index e3f21ba..34f5227 100644
--- a/arch/mips/jz4740/board-qi_lb60.c
+++ b/arch/mips/jz4740/board-qi_lb60.c
@@ -50,14 +50,14 @@ static bool is_avt2;
/* NAND */
static struct nand_ecclayout qi_lb60_ecclayout_1gb = {
-/* .eccbytes = 36,
+ .eccbytes = 36,
.eccpos = {
6, 7, 8, 9, 10, 11, 12, 13,
14, 15, 16, 17, 18, 19, 20, 21,
22, 23, 24, 25, 26, 27, 28, 29,
30, 31, 32, 33, 34, 35, 36, 37,
38, 39, 40, 41
- },*/
+ },
.oobfree = {
{ .offset = 2, .length = 4 },
{ .offset = 42, .length = 22 }
@@ -86,7 +86,7 @@ static struct mtd_partition qi_lb60_partitions_1gb[] = {
};
static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
-/* .eccbytes = 72,
+ .eccbytes = 72,
.eccpos = {
12, 13, 14, 15, 16, 17, 18, 19,
20, 21, 22, 23, 24, 25, 26, 27,
@@ -97,7 +97,7 @@ static struct nand_ecclayout qi_lb60_ecclayout_2gb = {
60, 61, 62, 63, 64, 65, 66, 67,
68, 69, 70, 71, 72, 73, 74, 75,
76, 77, 78, 79, 80, 81, 82, 83
- },*/
+ },
.oobfree = {
{ .offset = 2, .length = 10 },
{ .offset = 84, .length = 44 },
--
1.7.2.3
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device
2011-02-08 2:43 [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device Lars-Peter Clausen
2011-02-08 2:43 ` [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board Lars-Peter Clausen
@ 2011-03-25 12:30 ` Ralf Baechle
1 sibling, 0 replies; 4+ messages in thread
From: Ralf Baechle @ 2011-03-25 12:30 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: linux-mips, linux-kernel
Queued for 2.6.39. Thanks,
Ralf
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
2011-02-08 2:43 ` [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board Lars-Peter Clausen
@ 2011-03-25 12:31 ` Ralf Baechle
0 siblings, 0 replies; 4+ messages in thread
From: Ralf Baechle @ 2011-03-25 12:31 UTC (permalink / raw)
To: Lars-Peter Clausen; +Cc: linux-mips, linux-kernel
Queued for 2.6.39. Thanks,
Ralf
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-03-25 12:31 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2011-02-08 2:43 [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device Lars-Peter Clausen
2011-02-08 2:43 ` [PATCH] MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board Lars-Peter Clausen
2011-03-25 12:31 ` Ralf Baechle
2011-03-25 12:30 ` [PATCH] MIPS: JZ4740: qi_lb60: Add gpio-charger device Ralf Baechle
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).