LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: Andri Yngvason <andri.yngvason@marel.com>
Cc: Wolfgang Grandegger <wg@grandegger.com>,
	Olivier Sobrie <olivier@sobrie.be>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Linux-CAN <linux-can@vger.kernel.org>,
	netdev <netdev@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling
Date: Wed, 21 Jan 2015 10:36:47 -0500	[thread overview]
Message-ID: <20150121153647.GB17070@linux> (raw)
In-Reply-To: <20150121150015.31351.6605@shannon>

On Wed, Jan 21, 2015 at 03:00:15PM +0000, Andri Yngvason wrote:
> Quoting Ahmed S. Darwish (2015-01-21 14:43:23)
> > Hi!

...

> > <-- Unplug the cable -->
> > 
> >  (000.009106)  can0  20000080   [8]  00 00 00 00 00 00 08 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{8}{0}}
> >  (000.001872)  can0  20000080   [8]  00 00 00 00 00 00 10 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{16}{0}}
> [...]
> >         error-counter-tx-rx{{80}{0}}
> >  (000.001910)  can0  20000080   [8]  00 00 00 00 00 00 58 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{88}{0}}
> >  (000.001753)  can0  20000084   [8]  00 08 00 00 00 00 60 00   ERRORFRAME
> >         controller-problem{tx-error-warning}
> Good.
> >         bus-error
> >         error-counter-tx-rx{{96}{0}}

Nice.

> >  (000.001720)  can0  20000080   [8]  00 00 00 00 00 00 68 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{104}{0}}
> >  (000.001876)  can0  20000080   [8]  00 00 00 00 00 00 70 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{112}{0}}
> >  (000.001749)  can0  20000080   [8]  00 00 00 00 00 00 78 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{120}{0}}
> >  (000.001771)  can0  20000084   [8]  00 20 00 00 00 00 80 00   ERRORFRAME
> >         controller-problem{tx-error-passive}
> Also good.
> >         bus-error
> >         error-counter-tx-rx{{128}{0}}

Also nice :-)

> >  (000.001868)  can0  20000080   [8]  00 00 00 00 00 00 80 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{128}{0}}
> >  (000.001982)  can0  20000080   [8]  00 00 00 00 00 00 80 00   ERRORFRAME
> >         bus-error
> >         error-counter-tx-rx{{128}{0}}
> > 
> > (( Then a continous flood, exactly similar to the above packet, appears.
> >    Unfortunately this flooding is a firmware problem. ))
> > 
> > <-- Replug the cable, after a good amount of time -->
> >
> Where are the reverse state transitions?
> > 

Hmmm...

[ ... ]
> 
> Reverse state transitions are missing from the logs. See comments above.
> 

When the device is on the _receiving_ end, and I unplug the CAN cable after
introducing some noise to the level of reaching WARNING or PASSIVE, I
receive a BUS_ERROR event with the rxerr count reset back to 0 or 1. In
that case, the driver correctly transitions back the state to ERROR_ACTIVE
and candump produces something similar to:

    (000.000362)  can0  2000008C   [8]  00 40 40 00 00 00 00 01   ERRORFRAME
    controller-problem{}
    protocol-violation{{back-to-error-active}{}}
    bus-error
    error-counter-tx-rx{{0}{1}}

which is, AFAIK, the correct behaviour from the driver side.

Meanwhile, when the device is on the _sending_ end and I re-plug the CAN
cable again. Sometimes I receive events with txerr reset to 0 or 1, and
the driver correctly reverts back to ERROR_ACTIVE in that case. But on
another times like the quoted case above, I don't receive any events
resetting txerr back -- only data packets on the bus.

So, What can the driver do given the above?

Thanks,
Darwish

P.S. just in case, I'll also re-check now if the driver unintentionally
drops any important events resetting the txerr count back after a CAN
cable replug -- preventing the code from returning to ERROR_ACTIVE in
the process.


  reply	other threads:[~2015-01-21 15:37 UTC|newest]

Thread overview: 95+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36   ` Olivier Sobrie
2014-12-24 15:04     ` Ahmed S. Darwish
2014-12-28 21:51       ` Olivier Sobrie
2014-12-30 15:33         ` Ahmed S. Darwish
2014-12-31 12:13           ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52   ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59   ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25  0:02     ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25  0:04       ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54       ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25  2:50   ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25  9:38     ` Ahmed S. Darwish
2014-12-28 21:52   ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34   ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52   ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57     ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31       ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53         ` Marc Kleine-Budde
2015-01-08 15:19           ` Ahmed S. Darwish
2015-01-12 11:51             ` Marc Kleine-Budde
2015-01-12 12:26               ` Ahmed S. Darwish
2015-01-12 12:34                 ` Marc Kleine-Budde
2015-01-09  3:06           ` Ahmed S. Darwish
2015-01-09 14:05             ` Marc Kleine-Budde
2015-01-08  9:59   ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11   ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15     ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36       ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45         ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51           ` Marc Kleine-Budde
2015-01-12 10:14             ` Ahmed S. Darwish
2015-01-12 10:25               ` Marc Kleine-Budde
2015-01-12 13:33               ` Olivier Sobrie
2015-01-12 13:50                 ` Ahmed S. Darwish
2015-01-12 11:20         ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43         ` Marc Kleine-Budde
2015-01-12 12:07           ` Ahmed S. Darwish
2015-01-12 12:36             ` Ahmed S. Darwish
2015-01-12 13:53         ` Olivier Sobrie
2015-01-18 20:12           ` Ahmed S. Darwish
2015-01-18 20:13             ` Marc Kleine-Budde
2015-01-12 11:09       ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36         ` Ahmed S. Darwish
2015-01-16 14:39           ` Marc Kleine-Budde
2015-01-11 20:49     ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05       ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45   ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47     ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48       ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50         ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24         ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59           ` Ahmed S. Darwish
2015-01-21 10:33     ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44       ` Marc Kleine-Budde
2015-01-21 11:00         ` Andri Yngvason
2015-01-21 11:53       ` Wolfgang Grandegger
2015-01-21 14:43         ` Ahmed S. Darwish
2015-01-21 15:00           ` Andri Yngvason
2015-01-21 15:36             ` Ahmed S. Darwish [this message]
2015-01-21 16:13               ` Wolfgang Grandegger
2015-01-23  6:07                 ` Ahmed S. Darwish
2015-01-23 10:32                   ` Andri Yngvason
2015-01-25  2:43                     ` Ahmed S. Darwish
2015-01-26 10:21                       ` Andri Yngvason
2015-01-21 16:37               ` Andri Yngvason
2015-01-21 16:20     ` Andri Yngvason
2015-01-21 22:59       ` Marc Kleine-Budde
2015-01-22 10:14         ` Andri Yngvason
2015-01-25  2:49           ` Ahmed S. Darwish
2015-01-25  3:21       ` Ahmed S. Darwish
2015-01-26  5:17 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Ahmed S. Darwish
2015-01-26  5:20   ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26  5:22     ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26  5:24       ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26  5:25         ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26  5:27           ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26  5:29             ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26  5:33               ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34                 ` Andri Yngvason
2015-01-26 10:26               ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28             ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50               ` Marc Kleine-Budde
2015-01-26 10:52                 ` Andri Yngvason
2015-01-26 10:53                   ` Marc Kleine-Budde
2015-01-26  9:55   ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07   ` Marc Kleine-Budde
2015-01-26 10:56     ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150121153647.GB17070@linux \
    --to=darwish.07@gmail.com \
    --cc=andri.yngvason@marel.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=netdev@vger.kernel.org \
    --cc=olivier@sobrie.be \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    --subject='Re: [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
on how to clone and mirror all data and code used for this inbox