LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Zidan Wang <b50113@freescale.com>
To: Nicolin Chen <nicoleotsuka@gmail.com>
Cc: Zidan Wang <zidan.wang@freescale.com>, <timur@tabi.org>,
	<Xiubo.Lee@gmail.com>, <lgirdwood@gmail.com>,
	<broonie@kernel.org>, <perex@perex.cz>, <tiwai@suse.de>,
	<alsa-devel@alsa-project.org>, <linuxppc-dev@lists.ozlabs.org>,
	<linux-kernel@vger.kernel.org>
Subject: Re: [alsa-devel][PATCH 2/3] ASoC: fsl_sai: Add support for tdm slots operation
Date: Fri, 23 Jan 2015 10:55:09 +0800	[thread overview]
Message-ID: <20150123025507.GA2382@b50113> (raw)
In-Reply-To: <20150122235019.GA3204@Asurada-GSX>

On Thu, Jan 22, 2015 at 03:50:20PM -0800, Nicolin Chen wrote:
> On Thu, Jan 22, 2015 at 02:20:06PM +0800, Zidan Wang wrote:
> > > > > > @@ -369,10 +380,25 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
> > > > > >  	u32 word_width = snd_pcm_format_width(params_format(params));
> > > > > >  	u32 val_cr4 = 0, val_cr5 = 0;
> > > > > >  	int ret;
> > > > > > +	u32 bclk;
> > > > > > +
> > > > > > +	if (channels == 1)
> > > > > > +		channels = 2;
> > > > > > +
> > > > > > +	if (!sai->slots || sai->slots % channels)
> > > > > > +		sai->slots = channels;
> > > > > > +
> > > > > > +	sai->slots = sai->slots / channels;
> > > > > > +
> > > > > > +	if (sai->slot_width < word_width || sai->is_dsp_mode)
> > > > > > +		sai->slot_width = word_width;
> > > > > 
> > > > > Could you pls explain a bit what's this overriding for?
> > > > > Or it might be better to put into a comment.
> > > > >
> > > > In machine driver, we should use snd_soc_dai_set_tdm_slot to set slots
> > > > and slot width. In my opinion, slots in machine driver means the slot
> > > > number of all channels. But in sai driver, the slots means the slot number
> > > > of one channel. So snd_soc_calc_bclk use fs*sample_size*channels*tdm_slots
> > > > to caculate bclk.
> > > 
> > > Could you pls use the standard way as you described for slot number
> > > in machine driver instead of defining some other meanings? That one
> > > is really confusing, not to mention a code without any comment.
> > > 
> > > You can add some extra local variables with extinguished names and
> > > calculate the slot number and channels you want without changing
> > > the original sai->slots and channels in the hw_params(). As you said,
> > > you only need that new slot number and channels for snd_soc_calc_bclk
> > > call. So you may also put this code right before the call -- a normal
> > > routine doesn't need to recalculate the special slots and channels,
> > > right?
> 
> > Actually i don't kown which meaning is the standard way. Because i found
> > in wm8993 and wm8904 codec driver, they also use slots/channels to set 
> > tdm_slots in set_tdm_slot function.
> 
> The slots via machine driver should be total slot number per frame.
> For I2S, we're passing 2 for slots parameter in our machine drivers.
> 
> So why not just following that pattern. You code for calculating slot
> per channel is used to calculate bclk. But keeping slot per frame will
> also allow you to do that, meanwhile you can drop some code to do the
> extra calculation so as to keep it neat.
> 
> I suggest you to take a look at fsl_esai.c and to follow that way:
> Override slots and slot_width if specified from machine driver.
> 
I will follow slot per frame pattern like fsl_esai.c, thanks very mush.

I have another question.

Can a channel have several slots? Or channel just means slot.

> And another problem of your patch is the configurations for FRSZ and
> xMR fields. For monaural case, the channels == 1, the current code
> passes it directly to set them while your code overrides it to 2.
> 
> I'm not sure if you've tested the monaural case and confirmed it works.
> But, apparently, the configurations look pretty different.
>
I have tested the mono case, it works well.

Best Regards,
Zidan

  reply	other threads:[~2015-01-23  3:10 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-20 12:21 [alsa-devel][PATCH 0/3] Add master mode, tmd and right-j mode support Zidan Wang
2015-01-20 12:21 ` [alsa-devel][PATCH 1/3] SoC: fsl_sai: add sai master " Zidan Wang
2015-01-21  6:07   ` Nicolin Chen
2015-01-21  9:25     ` Zidan Wang
2015-01-21 17:36       ` Nicolin Chen
2015-01-20 12:21 ` [alsa-devel][PATCH 2/3] ASoC: fsl_sai: Add support for tdm slots operation Zidan Wang
2015-01-21 18:08   ` Nicolin Chen
2015-01-22  4:55     ` Zidan Wang
2015-01-22  5:44       ` Nicolin Chen
2015-01-22  6:20         ` Zidan Wang
2015-01-22 23:50           ` Nicolin Chen
2015-01-23  2:55             ` Zidan Wang [this message]
2015-01-23  8:27               ` Nicolin Chen
2015-01-20 12:21 ` [alsa-devel][PATCH 3/3] ASoC: fsl_sai: Add support for Right-J mode Zidan Wang
2015-01-21 18:53   ` Nicolin Chen
2015-01-22  5:13     ` Zidan Wang
2015-01-22  5:46       ` Nicolin Chen
2015-01-21  1:15 ` [alsa-devel] [PATCH 0/3] Add master mode, tmd and right-j mode support Fabio Estevam
2015-01-21  6:29   ` Nicolin Chen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150123025507.GA2382@b50113 \
    --to=b50113@freescale.com \
    --cc=Xiubo.Lee@gmail.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=nicoleotsuka@gmail.com \
    --cc=perex@perex.cz \
    --cc=timur@tabi.org \
    --cc=tiwai@suse.de \
    --cc=zidan.wang@freescale.com \
    --subject='Re: [alsa-devel][PATCH 2/3] ASoC: fsl_sai: Add support for tdm slots operation' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).