LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
To: linux-kernel@vger.kernel.org
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	stable@vger.kernel.org,
	Krzysztof Kozlowski <k.kozlowski@samsung.com>,
	Ulf Hansson <ulf.hansson@linaro.org>
Subject: [PATCH 3.10 46/50] mmc: sdhci: Fix sleep in atomic after inserting SD card
Date: Sun, 25 Jan 2015 10:07:36 -0800	[thread overview]
Message-ID: <20150125180705.237438918@linuxfoundation.org> (raw)
In-Reply-To: <20150125180702.521559311@linuxfoundation.org>

3.10-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Krzysztof Kozlowski <k.kozlowski@samsung.com>

commit 2836766a9d0bd02c66073f8dd44796e6cc23848d upstream.

Sleep in atomic context happened on Trats2 board after inserting or
removing SD card because mmc_gpio_get_cd() was called under spin lock.

Fix this by moving card detection earlier, before acquiring spin lock.
The mmc_gpio_get_cd() call does not have to be protected by spin lock
because it does not access any sdhci internal data.
The sdhci_do_get_cd() call access host flags (SDHCI_DEVICE_DEAD). After
moving it out side of spin lock it could theoretically race with driver
removal but still there is no actual protection against manual card
eject.

Dmesg after inserting SD card:
[   41.663414] BUG: sleeping function called from invalid context at drivers/gpio/gpiolib.c:1511
[   41.670469] in_atomic(): 1, irqs_disabled(): 128, pid: 30, name: kworker/u8:1
[   41.677580] INFO: lockdep is turned off.
[   41.681486] irq event stamp: 61972
[   41.684872] hardirqs last  enabled at (61971): [<c0490ee0>] _raw_spin_unlock_irq+0x24/0x5c
[   41.693118] hardirqs last disabled at (61972): [<c04907ac>] _raw_spin_lock_irq+0x18/0x54
[   41.701190] softirqs last  enabled at (61648): [<c0026fd4>] __do_softirq+0x234/0x2c8
[   41.708914] softirqs last disabled at (61631): [<c00273a0>] irq_exit+0xd0/0x114
[   41.716206] Preemption disabled at:[<  (null)>]   (null)
[   41.721500]
[   41.722985] CPU: 3 PID: 30 Comm: kworker/u8:1 Tainted: G        W      3.18.0-rc5-next-20141121 #883
[   41.732111] Workqueue: kmmcd mmc_rescan
[   41.735945] [<c0014d2c>] (unwind_backtrace) from [<c0011c80>] (show_stack+0x10/0x14)
[   41.743661] [<c0011c80>] (show_stack) from [<c0489d14>] (dump_stack+0x70/0xbc)
[   41.750867] [<c0489d14>] (dump_stack) from [<c0228b74>] (gpiod_get_raw_value_cansleep+0x18/0x30)
[   41.759628] [<c0228b74>] (gpiod_get_raw_value_cansleep) from [<c03646e8>] (mmc_gpio_get_cd+0x38/0x58)
[   41.768821] [<c03646e8>] (mmc_gpio_get_cd) from [<c036d378>] (sdhci_request+0x50/0x1a4)
[   41.776808] [<c036d378>] (sdhci_request) from [<c0357934>] (mmc_start_request+0x138/0x268)
[   41.785051] [<c0357934>] (mmc_start_request) from [<c0357cc8>] (mmc_wait_for_req+0x58/0x1a0)
[   41.793469] [<c0357cc8>] (mmc_wait_for_req) from [<c0357e68>] (mmc_wait_for_cmd+0x58/0x78)
[   41.801714] [<c0357e68>] (mmc_wait_for_cmd) from [<c0361c00>] (mmc_io_rw_direct_host+0x98/0x124)
[   41.810480] [<c0361c00>] (mmc_io_rw_direct_host) from [<c03620f8>] (sdio_reset+0x2c/0x64)
[   41.818641] [<c03620f8>] (sdio_reset) from [<c035a3d8>] (mmc_rescan+0x254/0x2e4)
[   41.826028] [<c035a3d8>] (mmc_rescan) from [<c003a0e0>] (process_one_work+0x180/0x3f4)
[   41.833920] [<c003a0e0>] (process_one_work) from [<c003a3bc>] (worker_thread+0x34/0x4b0)
[   41.841991] [<c003a3bc>] (worker_thread) from [<c003fed8>] (kthread+0xe4/0x104)
[   41.849285] [<c003fed8>] (kthread) from [<c000f268>] (ret_from_fork+0x14/0x2c)
[   42.038276] mmc0: new high speed SDHC card at address 1234

Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Fixes: 94144a465dd0 ("mmc: sdhci: add get_cd() implementation")
Cc: <stable@vger.kernel.org>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mmc/host/sdhci.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1316,6 +1316,8 @@ static void sdhci_request(struct mmc_hos
 
 	sdhci_runtime_pm_get(host);
 
+	present = mmc_gpio_get_cd(host->mmc);
+
 	spin_lock_irqsave(&host->lock, flags);
 
 	WARN_ON(host->mrq != NULL);
@@ -1344,7 +1346,6 @@ static void sdhci_request(struct mmc_hos
 	 *     zero: cd-gpio is used, and card is removed
 	 *     one: cd-gpio is used, and card is present
 	 */
-	present = mmc_gpio_get_cd(host->mmc);
 	if (present < 0) {
 		/* If polling, assume that the card is always present. */
 		if (host->quirks & SDHCI_QUIRK_BROKEN_CARD_DETECTION)



  parent reply	other threads:[~2015-01-25 19:33 UTC|newest]

Thread overview: 53+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-25 18:06 [PATCH 3.10 00/50] 3.10.66-stable review Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 01/50] netlink: Always copy on mmap TX Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 02/50] netlink: Dont reorder loads/stores before marking mmap netlink frame as available Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 03/50] tg3: tg3_disable_ints using uninitialized mailbox value to disable interrupts Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 04/50] tcp: Do not apply TSO segment limit to non-TSO packets Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 05/50] alx: fix alx_poll() Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 06/50] enic: fix rx skb checksum Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 07/50] drm/vmwgfx: Fix fence event code Greg Kroah-Hartman
2015-01-25 18:06 ` [PATCH 3.10 09/50] drm/radeon: properly filter DP1.2 4k modes on non-DP1.2 hw Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 12/50] ARC: [nsimosci] move peripherals to match model to FPGA Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 13/50] cfg80211: Fix 160 MHz channels with 80+80 and 160 MHz drivers Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 14/50] hp_accel: Add support for HP ZBook 15 Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 15/50] iscsi-target: Fail connection on short sendmsg writes Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 16/50] storvsc: ring buffer failures may result in I/O freeze Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 17/50] video/logo: prevent use of logos after they have been freed Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 18/50] [media] smiapp-pll: Correct clock debug prints Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 20/50] [media] smiapp: Take mutex during PLL update in sensor initialisation Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 21/50] [media] uvcvideo: Fix destruction order in uvc_delete() Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 22/50] vfio-pci: Fix the check on pci device type in vfio_pci_probe() Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 23/50] ftrace/jprobes/x86: Fix conflict between jprobes and function graph tracing Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 24/50] NFSv4.1: Fix client id trunking on Linux Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 25/50] gpiolib: of: Correct error handling in of_get_named_gpiod_flags Greg Kroah-Hartman
2015-01-25 21:31   ` Guenter Roeck
2015-01-25 22:05     ` Greg Kroah-Hartman
2015-01-26  0:29       ` Guenter Roeck
2015-01-26 18:35         ` Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 26/50] OHCI: add a quirk for ULi M5237 blocking on reset Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 27/50] usb: dwc3: gadget: Fix TRB preparation during SG Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 28/50] usb: dwc3: gadget: Stop TRB preparation after limit is reached Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 29/50] USB: cp210x: fix ID for production CEL MeshConnect USB Stick Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 30/50] USB: cp210x: add IDs for CEL USB sticks and MeshWorks devices Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 31/50] USB: keyspan: fix null-deref at probe Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 32/50] can: kvaser_usb: Dont free packets when tight on URBs Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 33/50] can: kvaser_usb: Reset all URB tx contexts upon channel close Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 34/50] can: kvaser_usb: Dont send a RESET_CHIP for non-existing channels Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 36/50] Input: I8042 - add Acer Aspire 7738 to the nomux list Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 37/50] ARM: dts: imx25: Fix the SPI1 clocks Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 38/50] ARM: imx6q: drop unnecessary semicolon Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 39/50] ARM: clk-imx6q: fix video divider for rev T0 1.0 Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 40/50] ARM: omap5/dra7xx: Fix frequency typos Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 41/50] ARM: shmobile: sh73a0 legacy: Set .control_parent for all irqpin instances Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 42/50] decompress_bunzip2: off by one in get_next_block() Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 43/50] um: Skip futex_atomic_cmpxchg_inatomic() test Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 44/50] x86, um: actually mark system call tables readonly Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 45/50] LOCKD: Fix a race when initialising nlmsvc_timeout Greg Kroah-Hartman
2015-01-25 18:07 ` Greg Kroah-Hartman [this message]
2015-01-25 18:07 ` [PATCH 3.10 47/50] netfilter: ipset: small potential read beyond the end of buffer Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 48/50] fsnotify: next_i is freed during fsnotify_unmount_inodes Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 49/50] s390/3215: fix hanging console issue Greg Kroah-Hartman
2015-01-25 18:07 ` [PATCH 3.10 50/50] s390/3215: fix tty output containing tabs Greg Kroah-Hartman
2015-01-25 20:57 ` [PATCH 3.10 00/50] 3.10.66-stable review Guenter Roeck
2015-01-25 21:35 ` Guenter Roeck
2015-01-26 17:43 ` Shuah Khan

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150125180705.237438918@linuxfoundation.org \
    --to=gregkh@linuxfoundation.org \
    --cc=k.kozlowski@samsung.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=stable@vger.kernel.org \
    --cc=ulf.hansson@linaro.org \
    --subject='Re: [PATCH 3.10 46/50] mmc: sdhci: Fix sleep in atomic after inserting SD card' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).