From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: Olivier Sobrie <olivier@sobrie.be>,
Oliver Hartkopp <socketcan@hartkopp.net>,
Wolfgang Grandegger <wg@grandegger.com>,
Marc Kleine-Budde <mkl@pengutronix.de>,
Andri Yngvason <andri.yngvason@marel.com>
Cc: Linux-CAN <linux-can@vger.kernel.org>,
netdev <netdev@vger.kernel.org>,
LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support
Date: Mon, 26 Jan 2015 07:17:55 +0200
Message-ID: <20150126051755.GA3014@Darwish.PC> (raw)
In-Reply-To: <20141223154654.GB6460@vivalin-002>
Hi!
This is an updated patch series for the Kvaser CAN/USB devices:
1- Extra patches are now added to the series. Most importantly
patch #1 which fixes a critical `sleep in atomic context' bug
in the current upstream driver. Patch #2 fixes a corruption in
the kernel logs, also affecting current upstream driver. Patch
#4 was originally USBCan-II only, but since it's a generic fix,
it's now retrofitted to the Leaf-only upstream driver first.
2- The series has been re-organized so that patches #1 -> #4
inclusive can go to linux-can/origin, while the rest can move
to -next.
3- There are some important updates regarding the USBCan-II
error counters, and how really erratic their heaviour is. All
the new details are covered at the bottom of this URL:
http://article.gmane.org/gmane.linux.can/7481
4- Attached below is the new candump traces. Now
`back-to-error-active' states appear _if_ the hardware was
kind enough and decreased the error counters appropriately.
The earlier code did not recognize the error counters going
down, thus the `back-to-error-active' transitions did not
appear.
###########################################################
* Bus-off scenario (with transitions active -> passive -> back-to-active):
(000.000000) can0 20000080 [8] 00 00 00 00 00 00 30 00 ERRORFRAME
bus-error
error-counter-tx-rx{{48}{0}}
(000.000011) can0 20000084 [8] 00 20 00 00 00 00 88 00 ERRORFRAME
controller-problem{tx-error-passive}
bus-error
error-counter-tx-rx{{136}{0}}
(000.000001) can0 20000080 [8] 00 00 00 00 00 00 88 00 ERRORFRAME
bus-error
error-counter-tx-rx{{136}{0}}
(000.000987) can0 20000080 [8] 00 00 00 00 00 00 98 00 ERRORFRAME
bus-error
error-counter-tx-rx{{152}{0}}
(000.002011) can0 20000084 [8] 00 40 00 00 00 00 30 00 ERRORFRAME
controller-problem{back-to-error-active}
bus-error
error-counter-tx-rx{{48}{0}}
(000.000004) can0 20000084 [8] 00 20 00 00 00 00 78 00 ERRORFRAME
controller-problem{tx-error-passive}
bus-error
error-counter-tx-rx{{120}{0}}
(000.000002) can0 20000080 [8] 00 00 00 00 00 00 88 00 ERRORFRAME
bus-error
error-counter-tx-rx{{136}{0}}
(000.000005) can0 20000080 [8] 00 00 00 00 00 00 90 00 ERRORFRAME
bus-error
error-counter-tx-rx{{144}{0}}
(000.000002) can0 20000080 [8] 00 00 00 00 00 00 98 00 ERRORFRAME
bus-error
error-counter-tx-rx{{152}{0}}
(000.000001) can0 20000080 [8] 00 00 00 00 00 00 A0 00 ERRORFRAME
bus-error
error-counter-tx-rx{{160}{0}}
(000.000966) can0 20000080 [8] 00 00 00 00 00 00 A8 00 ERRORFRAME
bus-error
error-counter-tx-rx{{168}{0}}
(000.002998) can0 20000084 [8] 00 40 00 00 00 00 30 00 ERRORFRAME
controller-problem{back-to-error-active}
bus-error
error-counter-tx-rx{{48}{0}}
(000.000004) can0 20000084 [8] 00 20 00 00 00 00 80 00 ERRORFRAME
controller-problem{tx-error-passive}
bus-error
error-counter-tx-rx{{128}{0}}
(000.000002) can0 20000080 [8] 00 00 00 00 00 00 88 00 ERRORFRAME
bus-error
error-counter-tx-rx{{136}{0}}
(001.031035) can0 200000C0 [8] 00 00 00 00 00 00 00 29 ERRORFRAME
bus-off
bus-error
error-counter-tx-rx{{0}{41}}
###########################################################
Regular sending, unpluggng CAN connector, then plugging again:
(with transitions active -> warning -> passive)
[ As stated earlier, the counters don't get decreased upon CAN
replug, even if they were constantly polled. ]
(000.011001) can0 2A1 [1] E5
(000.010001) can0 50E [8] E6 05 00 00 00 00 00 00
(000.009999) can0 009 [1] E7
(000.011000) can0 6E2 [8] E8 05 00 00 00 00 00 00
(000.009999) can0 314 [2] E9 05
(000.010001) can0 708 [6] EA 05 00 00 00 00
(000.010991) can0 20000080 [8] 00 00 00 00 00 00 00 09 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{9}}
(000.000002) can0 20000080 [8] 00 00 00 00 00 00 00 0A ERRORFRAME
bus-error
error-counter-tx-rx{{0}{10}}
(000.000007) can0 20000080 [8] 00 00 00 00 00 00 00 2E ERRORFRAME
bus-error
error-counter-tx-rx{{0}{46}}
(000.000003) can0 20000080 [8] 00 00 00 00 00 00 00 37 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{55}}
(000.000002) can0 20000080 [8] 00 00 00 00 00 00 00 40 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{64}}
(000.000993) can0 20000080 [8] 00 00 00 00 00 00 00 49 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{73}}
(000.000002) can0 20000080 [8] 00 00 00 00 00 00 00 52 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{82}}
(000.000001) can0 20000080 [8] 00 00 00 00 00 00 00 5B ERRORFRAME
bus-error
error-counter-tx-rx{{0}{91}}
(000.000028) can0 20000084 [8] 00 04 00 00 00 00 00 6C ERRORFRAME
controller-problem{rx-error-warning}
bus-error
error-counter-tx-rx{{0}{108}}
(000.000955) can0 20000080 [8] 00 00 00 00 00 00 00 7F ERRORFRAME
bus-error
error-counter-tx-rx{{0}{127}}
(000.000008) can0 20000084 [8] 00 10 00 00 00 00 00 87 ERRORFRAME
controller-problem{rx-error-passive}
bus-error
error-counter-tx-rx{{0}{135}}
(000.000001) can0 20000080 [8] 00 00 00 00 00 00 00 87 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{135}}
(000.000004) can0 20000080 [8] 00 00 00 00 00 00 00 87 ERRORFRAME
bus-error
error-counter-tx-rx{{0}{135}}
((( Then a continous flood, exactly similar to the above packet, appears )))
(000.500004) can0 2ED [4] EB 05 00 00
(000.000006) can0 0DD [5] EC 05 00 00 00
(000.000002) can0 1D3 [1] ED
(000.000988) can0 20D [8] EE 05 00 00 00 00 00 00
(000.000006) can0 04B [8] EF 05 00 00 00 00 00 00
(000.000002) can0 320 [8] F0 05 00 00 00 00 00 00
(000.000002) can0 023 [8] F1 05 00 00 00 00 00 00
(000.000989) can0 21D [8] F2 05 00 00 00 00 00 00
(000.000005) can0 17D [8] F3 05 00 00 00 00 00 00
(000.000002) can0 6DC [8] F4 05 00 00 00 00 00 00
(000.000993) can0 62D [8] F5 05 00 00 00 00 00 00
(000.000006) can0 18B [6] F6 05 00 00 00 00
(000.000001) can0 7EB [8] F7 05 00 00 00 00 00 00
(000.000001) can0 014 [8] F8 05 00 00 00 00 00 00
(000.000994) can0 52F [8] F9 05 00 00 00 00 00 00
--
Regards,
Darwish
next prev parent reply index
Thread overview: 95+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-12-23 15:46 [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Ahmed S. Darwish
2014-12-23 15:53 ` [PATCH] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-24 12:36 ` Olivier Sobrie
2014-12-24 15:04 ` Ahmed S. Darwish
2014-12-28 21:51 ` Olivier Sobrie
2014-12-30 15:33 ` Ahmed S. Darwish
2014-12-31 12:13 ` Olivier Sobrie
2014-12-24 12:31 ` [PATCH] can: kvaser_usb: Don't free packets when tight on URBs Olivier Sobrie
2014-12-24 15:52 ` Ahmed S. Darwish
2014-12-24 23:56 ` [PATCH v2 1/4] " Ahmed S. Darwish
2014-12-24 23:59 ` [PATCH v2 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2014-12-25 0:02 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2014-12-25 0:04 ` [PATCH v2 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2014-12-28 21:54 ` [PATCH v2 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Olivier Sobrie
2014-12-25 2:50 ` [PATCH v2 1/4] can: kvaser_usb: Don't free packets when tight on URBs Greg KH
2014-12-25 9:38 ` Ahmed S. Darwish
2014-12-28 21:52 ` Olivier Sobrie
2015-01-01 21:59 ` [PATCH] " Stephen Hemminger
2015-01-03 14:34 ` Ahmed S. Darwish
2015-01-05 17:49 ` [PATCH v3 1/4] " Ahmed S. Darwish
2015-01-05 17:52 ` [PATCH v3 2/4] can: kvaser_usb: Reset all URB tx contexts upon channel close Ahmed S. Darwish
2015-01-05 17:57 ` [PATCH v3 3/4] can: kvaser_usb: Don't send a RESET_CHIP for non-existing channels Ahmed S. Darwish
2015-01-05 18:31 ` [PATCH v3 4/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-08 11:53 ` Marc Kleine-Budde
2015-01-08 15:19 ` Ahmed S. Darwish
2015-01-12 11:51 ` Marc Kleine-Budde
2015-01-12 12:26 ` Ahmed S. Darwish
2015-01-12 12:34 ` Marc Kleine-Budde
2015-01-09 3:06 ` Ahmed S. Darwish
2015-01-09 14:05 ` Marc Kleine-Budde
2015-01-08 9:59 ` [PATCH v3 1/4] can: kvaser_usb: Don't free packets when tight on URBs Marc Kleine-Budde
2015-01-11 20:05 ` [PATCH v4 00/04] can: Introduce support for Kvaser USBCAN-II devices Ahmed S. Darwish
2015-01-11 20:11 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() devices Ahmed S. Darwish
2015-01-11 20:15 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Ahmed S. Darwish
2015-01-11 20:36 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-11 20:45 ` [PATCH v4 4/4] can: kvaser_usb: Retry first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-11 20:51 ` Marc Kleine-Budde
2015-01-12 10:14 ` Ahmed S. Darwish
2015-01-12 10:25 ` Marc Kleine-Budde
2015-01-12 13:33 ` Olivier Sobrie
2015-01-12 13:50 ` Ahmed S. Darwish
2015-01-12 11:20 ` [PATCH v4 3/4] can: kvaser_usb: Add support for the Usbcan-II family Ahmed S. Darwish
2015-01-12 11:43 ` Marc Kleine-Budde
2015-01-12 12:07 ` Ahmed S. Darwish
2015-01-12 12:36 ` Ahmed S. Darwish
2015-01-12 13:53 ` Olivier Sobrie
2015-01-18 20:12 ` Ahmed S. Darwish
2015-01-18 20:13 ` Marc Kleine-Budde
2015-01-12 11:09 ` [PATCH v4 2/4] can: kvaser_usb: Update error counters before exiting on OOM Marc Kleine-Budde
2015-01-12 20:36 ` Ahmed S. Darwish
2015-01-16 14:39 ` Marc Kleine-Budde
2015-01-11 20:49 ` [PATCH v4 01/04] can: kvaser_usb: Don't dereference skb after a netif_rx() Ahmed S. Darwish
2015-01-12 11:05 ` Marc Kleine-Budde
2015-01-20 21:44 ` [PATCH v5 1/5] can: kvaser_usb: Update net interface state before exiting on OOM Ahmed S. Darwish
2015-01-20 21:45 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-20 21:47 ` [PATCH v5 3/5] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-20 21:48 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-20 21:50 ` [PATCH v5 5/5] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-21 12:24 ` [PATCH v5 4/5] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Sergei Shtylyov
2015-01-25 11:59 ` Ahmed S. Darwish
2015-01-21 10:33 ` [PATCH v5 2/5] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-21 10:44 ` Marc Kleine-Budde
2015-01-21 11:00 ` Andri Yngvason
2015-01-21 11:53 ` Wolfgang Grandegger
2015-01-21 14:43 ` Ahmed S. Darwish
2015-01-21 15:00 ` Andri Yngvason
2015-01-21 15:36 ` Ahmed S. Darwish
2015-01-21 16:13 ` Wolfgang Grandegger
2015-01-23 6:07 ` Ahmed S. Darwish
2015-01-23 10:32 ` Andri Yngvason
2015-01-25 2:43 ` Ahmed S. Darwish
2015-01-26 10:21 ` Andri Yngvason
2015-01-21 16:37 ` Andri Yngvason
2015-01-21 16:20 ` Andri Yngvason
2015-01-21 22:59 ` Marc Kleine-Budde
2015-01-22 10:14 ` Andri Yngvason
2015-01-25 2:49 ` Ahmed S. Darwish
2015-01-25 3:21 ` Ahmed S. Darwish
2015-01-26 5:17 ` Ahmed S. Darwish [this message]
2015-01-26 5:20 ` [PATCH v6 1/7] can: kvaser_usb: Do not sleep in atomic context Ahmed S. Darwish
2015-01-26 5:22 ` [PATCH v6 2/7] can: kvaser_usb: Send correct context to URB completion Ahmed S. Darwish
2015-01-26 5:24 ` [PATCH v6 3/7] can: kvaser_usb: Retry the first bulk transfer on -ETIMEDOUT Ahmed S. Darwish
2015-01-26 5:25 ` [PATCH v6 4/7] can: kvaser_usb: Fix state handling upon BUS_ERROR events Ahmed S. Darwish
2015-01-26 5:27 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Ahmed S. Darwish
2015-01-26 5:29 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Ahmed S. Darwish
2015-01-26 5:33 ` [PATCH v6 7/7] can: kvaser_usb: Add support for the USBcan-II family Ahmed S. Darwish
2015-01-26 10:34 ` Andri Yngvason
2015-01-26 10:26 ` [PATCH v6 6/7] can: kvaser_usb: Consolidate and unify state change handling Andri Yngvason
2015-01-26 10:28 ` [PATCH v6 5/7] can: kvaser_usb: Update interface state before exiting on OOM Andri Yngvason
2015-01-26 10:50 ` Marc Kleine-Budde
2015-01-26 10:52 ` Andri Yngvason
2015-01-26 10:53 ` Marc Kleine-Budde
2015-01-26 9:55 ` [PATCH v6 0/7] can: kvaser_usb: Leaf bugfixes and USBCan-II support Marc Kleine-Budde
2015-01-26 10:07 ` Marc Kleine-Budde
2015-01-26 10:56 ` Marc Kleine-Budde
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20150126051755.GA3014@Darwish.PC \
--to=darwish.07@gmail.com \
--cc=andri.yngvason@marel.com \
--cc=linux-can@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mkl@pengutronix.de \
--cc=netdev@vger.kernel.org \
--cc=olivier@sobrie.be \
--cc=socketcan@hartkopp.net \
--cc=wg@grandegger.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
LKML Archive on lore.kernel.org
Archives are clonable:
git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
linux-kernel@vger.kernel.org
public-inbox-index lkml
Example config snippet for mirrors
Newsgroup available over NNTP:
nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git