LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [GIT PULL] PCI fixes for v3.19
@ 2015-01-23 20:31 Bjorn Helgaas
  2015-01-26 19:58 ` Tony Luck
  0 siblings, 1 reply; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-23 20:31 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: linux-pci, linux-kernel, Lucas Stach, Richard Zhu, Yinghai Lu,
	Marek Kordik, Alex Williamson, Andreas Hartmann, zermond,
	David Airlie, Alex Deucher

Hi Linus,

These are fixes for:

  - A resource management problem that causes a Radeon "Fatal error during
    GPU init" on machines where the BIOS programmed an invalid Root Port
    window.  This was a regression in v3.16.

  - An Atheros AR93xx device that doesn't handle PCI bus resets correctly.
    This was a regression in v3.14.

  - An out-of-date email address.

Bjorn


The following changes since commit 97bf6af1f928216fd6c5a66e8a57bfa95a659672:

  Linux 3.19-rc1 (2014-12-20 17:08:50 -0800)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v3.19-fixes-1

for you to fetch changes up to f175aa2c9f6cc08f043e85ea37f44ef3676cbac1:

  MAINTAINERS: Update Richard Zhu's email address (2015-01-22 13:40:59 -0600)

----------------------------------------------------------------
PCI updates for v3.19:

  Resource management
    - Clip bridge windows to fit in upstream windows (Yinghai Lu)

  Virtualization
    - Mark Atheros AR93xx to avoid using bus reset (Alex Williamson)

  Miscellaneous
    - Update Richard Zhu's email address (Lucas Stach)

----------------------------------------------------------------
Alex Williamson (2):
      PCI: Add flag for devices where we can't use bus reset
      PCI: Mark Atheros AR93xx to avoid bus reset

Lucas Stach (1):
      MAINTAINERS: Update Richard Zhu's email address

Yinghai Lu (12):
      PCI: Pass bridge device, not bus, when updating bridge windows
      PCI: Add pci_bus_clip_resource() to clip to fit upstream window
      PCI: Add pci_claim_bridge_resource() to clip window if necessary
      x86/PCI: Clip bridge windows to fit in upstream windows
      alpha/PCI: Clip bridge windows to fit in upstream windows
      frv/PCI: Clip bridge windows to fit in upstream windows
      ia64/PCI: Clip bridge windows to fit in upstream windows
      microblaze/PCI: Clip bridge windows to fit in upstream windows
      mn10300/PCI: Clip bridge windows to fit in upstream windows
      parisc/PCI: Clip bridge windows to fit in upstream windows
      powerpc/PCI: Clip bridge windows to fit in upstream windows
      sparc/PCI: Clip bridge windows to fit in upstream windows

 MAINTAINERS                             |  2 +-
 arch/alpha/kernel/pci.c                 |  8 +++--
 arch/frv/mb93090-mb00/pci-frv.c         |  2 +-
 arch/ia64/pci/pci.c                     | 48 +++++++++++++---------------
 arch/microblaze/pci/pci-common.c        | 13 +++++++-
 arch/mn10300/unit-asb2305/pci-asb2305.c |  2 +-
 arch/mn10300/unit-asb2305/pci.c         | 47 +++++++++++++--------------
 arch/powerpc/kernel/pci-common.c        | 12 ++++++-
 arch/sparc/kernel/pci.c                 |  5 ++-
 arch/x86/pci/i386.c                     |  2 +-
 drivers/parisc/lba_pci.c                |  5 ++-
 drivers/pci/bus.c                       | 43 +++++++++++++++++++++++++
 drivers/pci/pci.c                       | 40 ++++++++++++++++++++---
 drivers/pci/pci.h                       |  1 +
 drivers/pci/quirks.c                    | 14 +++++++++
 drivers/pci/setup-bus.c                 | 56 ++++++++++++++++++++++++++-------
 include/linux/pci.h                     |  3 ++
 17 files changed, 222 insertions(+), 81 deletions(-)

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-23 20:31 [GIT PULL] PCI fixes for v3.19 Bjorn Helgaas
@ 2015-01-26 19:58 ` Tony Luck
  2015-01-26 21:02   ` Bjorn Helgaas
  0 siblings, 1 reply; 17+ messages in thread
From: Tony Luck @ 2015-01-26 19:58 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Yinghai Lu, Marek Kordik,
	Alex Williamson, Andreas Hartmann, zermond, David Airlie,
	Alex Deucher

[-- Attachment #1: Type: text/plain, Size: 2200 bytes --]

I'm seeing these new messages in v3.19-rc6 on ia64:

pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
no compatible bridge window
pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
no compatible bridge window
pci 0000:03:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]:
no compatible bridge window
pci 0000:0b:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
no compatible bridge window
pci 0000:80:13.0: can't claim BAR 0 [mem 0xa0220000-0xa0220fff]: no
compatible bridge window
pci 0000:80:16.0: can't claim BAR 0 [mem 0xa0200000-0xa0203fff 64bit]:
no compatible bridge window
pci 0000:80:16.1: can't claim BAR 0 [mem 0xa0204000-0xa0207fff 64bit]:
no compatible bridge window
pci 0000:80:16.2: can't claim BAR 0 [mem 0xa0208000-0xa020bfff 64bit]:
no compatible bridge window
pci 0000:80:16.3: can't claim BAR 0 [mem 0xa020c000-0xa020ffff 64bit]:
no compatible bridge window
pci 0000:80:16.4: can't claim BAR 0 [mem 0xa0210000-0xa0213fff 64bit]:
no compatible bridge window
pci 0000:80:16.5: can't claim BAR 0 [mem 0xa0214000-0xa0217fff 64bit]:
no compatible bridge window
pci 0000:80:16.6: can't claim BAR 0 [mem 0xa0218000-0xa021bfff 64bit]:
no compatible bridge window
pci 0000:80:16.7: can't claim BAR 0 [mem 0xa021c000-0xa021ffff 64bit]:
no compatible bridge window
pci 0000:80:01.0: can't claim BAR 8 [mem 0xa0100000-0xa01fffff]: no
compatible bridge window
pci 0000:81:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
no compatible bridge window
pci 0000:81:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
no compatible bridge window
pci 0000:80:05.0: can't claim BAR 8 [mem 0xa0000000-0xa00fffff]: no
compatible bridge window
pci 0000:83:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]:
no compatible bridge window

Bisection pointed to:

>       ia64/PCI: Clip bridge windows to fit in upstream windows

and reverting commit ce821ef0333fc1 makes them go away again.

How do I tell whether I really have a bunch of badly configured busses
that we are just
now able to detect, or there is something spurious in this patch? Contents of
/proc/iomem (from the kernel with the reverted patch) attached.

-Tony

[-- Attachment #2: iomem.txt --]
[-- Type: text/plain, Size: 7174 bytes --]

00000000-00000fff : System RAM
00001000-0005ffff : System RAM
00060000-00087fff : System RAM
00088000-00096fff : System RAM
00097000-00097fff : System RAM
00098000-0009ffff : System RAM
000c0000-000fffff : reserved
00100000-003fffff : System RAM
00400000-00471fff : System RAM
00472000-00bfffff : System RAM
00c00000-00ffffff : System RAM
01000000-03ffffff : System RAM
04000000-05e6afff : System RAM
  04000000-04c3873f : Kernel code
  04c38740-05676f87 : Kernel data
  05676f88-05e6afcf : Kernel bss
05e6b000-3a247fff : System RAM
3a248000-3a249fff : reserved
3a24a000-3a26dfff : reserved
3a26e000-3a4e9fff : System RAM
3a4ea000-3a4ebfff : ACPI Non-volatile Storage
3a4ec000-3a4effff : System RAM
3a4f0000-3a537fff : reserved
3a538000-3a59dfff : System RAM
3a59e000-3a5a1fff : System RAM
3a5a2000-3a5ebfff : reserved
3a5ec000-3a5f3fff : reserved
3a5f4000-3a6bdfff : reserved
3a6be000-3a6befff : System RAM
3a6bf000-3a6ebfff : System RAM
3a6ec000-3a73bfff : reserved
3a73c000-3a743fff : System RAM
3a744000-3a745fff : reserved
3a746000-3a747fff : System RAM
3a748000-3a749fff : reserved
3a74a000-3a74bfff : System RAM
3a74c000-3a74ffff : reserved
3a750000-3a759fff : reserved
3a75a000-3a75bfff : reserved
3a75c000-3a773fff : reserved
3a774000-3a774fff : System RAM
3a775000-3a845fff : System RAM
3a846000-3a847fff : System RAM
3a848000-3a913fff : System RAM
3a914000-3a918fff : System RAM
3a919000-3ab41fff : System RAM
3ab42000-3ab4afff : System RAM
3ab4b000-3ac4bfff : System RAM
3ac4c000-3ac57fff : reserved
3ac58000-3ac79fff : reserved
3ac7a000-3aca9fff : reserved
3acaa000-3ad0dfff : System RAM
3ad0e000-3ad59fff : System RAM
3ad5a000-3ad6dfff : reserved
3ad6e000-3ad99fff : System RAM
3ad9a000-3ad9bfff : reserved
3ad9c000-3ada9fff : reserved
3adaa000-3adaafff : System RAM
3adab000-3add1fff : System RAM
3add2000-3ade5fff : reserved
3ade6000-3adfbfff : System RAM
3adfc000-3ae1bfff : reserved
3ae1c000-3ae1ffff : System RAM
3ae20000-3ae3dfff : reserved
3ae3e000-3ae40fff : System RAM
3ae41000-3ae5bfff : System RAM
3ae5c000-3ae5dfff : ACPI Non-volatile Storage
3ae5e000-3ae81fff : System RAM
3ae82000-3ae9bfff : reserved
3ae9c000-3aeb7fff : reserved
3aeb8000-3aeb8fff : System RAM
3aeb9000-3aebffff : System RAM
3aec0000-3aff5fff : reserved
3aff6000-3b001fff : reserved
3b002000-3b003fff : reserved
3b004000-3b005fff : System RAM
3b006000-3b017fff : reserved
3b018000-3b019fff : System RAM
3b01a000-3b21bfff : reserved
3b21c000-3b265fff : reserved
3b266000-3b271fff : System RAM
3b272000-3b27ffff : reserved
3b280000-3b2dffff : System RAM
3b2e0000-3b2e1fff : reserved
3b2e2000-3b3a3fff : System RAM
3b3a4000-3b3b5fff : reserved
3b3b6000-3b3c7fff : System RAM
3b3c8000-3b3d1fff : System RAM
3b3d2000-3b935fff : System RAM
3b936000-3b95ffff : reserved
3b960000-3b964fff : System RAM
3b965000-3b989fff : System RAM
3b98a000-3b991fff : reserved
3b992000-3b9a7fff : System RAM
3b9a8000-3bbaffff : reserved
3bbb0000-3bbfffff : reserved
3bc00000-3befffff : reserved
3bf00000-3c0e5fff : reserved
3c0e6000-3c0e6fff : System RAM
3c0e7000-3c16dfff : System RAM
3c16e000-3c175fff : reserved
3c176000-3c217fff : System RAM
3c218000-3c22dfff : reserved
3c22e000-3c62dfff : System RAM
3c62e000-3c6a9fff : System RAM
3c6aa000-3c7dffff : System RAM
3c7e0000-3c7e3fff : reserved
3c7e4000-3c859fff : System RAM
3c85a000-3c888fff : System RAM
3c889000-3c895fff : System RAM
3c896000-3c8a1fff : reserved
3c8a2000-3c8a2fff : System RAM
3c8a3000-3c8b5fff : System RAM
3c8b6000-3c8c7fff : System RAM
3c8c8000-3c8c9fff : System RAM
3c8ca000-3c8d9fff : reserved
3c8da000-3c8f0fff : System RAM
3c8f1000-3c8f7fff : System RAM
3c8f8000-3ca4ffff : System RAM
3ca50000-3ca53fff : reserved
3ca54000-3ca59fff : System RAM
3ca5a000-3cab1fff : System RAM
3cab2000-3cab3fff : reserved
3cab4000-3cc85fff : System RAM
3cc86000-3cc87fff : reserved
3cc88000-3cdd9fff : System RAM
3cdda000-3cddbfff : reserved
3cddc000-3ce3bfff : System RAM
3ce3c000-3ce3dfff : reserved
3ce3e000-3d86bfff : System RAM
3d86c000-3d873fff : System RAM
3d874000-3d8abfff : System RAM
3d8ac000-3d8b5fff : System RAM
3d8b6000-3d8d7fff : System RAM
3d8d8000-3d8ddfff : System RAM
3d8de000-3d9effff : System RAM
3d9f0000-3d9f1fff : reserved
3d9f2000-3da41fff : System RAM
3da42000-3da43fff : reserved
3da44000-3dbf6fff : System RAM
3dbf7000-3dbfdfff : System RAM
3dbfe000-3e80dfff : System RAM
3e80e000-3e80ffff : reserved
3e810000-3e81dfff : System RAM
3e81e000-3e81ffff : reserved
3e820000-3e845fff : System RAM
3e846000-3e8bbfff : System RAM
3e8bc000-3f8d6fff : System RAM
3f8d7000-3fcd6fff : reserved
3fcd7000-3fce0fff : System RAM
3fce1000-3fdcefff : reserved
3fdcf000-3fdf2fff : System RAM
3fdf3000-3fffffff : reserved
50000000-9fffffff : PCI Bus 0000:00
  50000000-580fffff : PCI Bus 0000:0b
    50000000-57ffffff : 0000:0b:04.0
    58000000-5800ffff : 0000:0b:04.0
  58100000-581fffff : PCI Bus 0000:03
    58100000-5810ffff : 0000:03:00.0
      58100000-5810ffff : mpt
    58110000-58113fff : 0000:03:00.0
      58110000-58113fff : mpt
  58200000-582fffff : PCI Bus 0000:01
    58200000-5821ffff : 0000:01:00.1
      58200000-5821ffff : igb
    58220000-5823ffff : 0000:01:00.1
      58220000-5823ffff : igb
    58240000-5825ffff : 0000:01:00.0
      58240000-5825ffff : igb
    58260000-5827ffff : 0000:01:00.0
      58260000-5827ffff : igb
    58280000-58283fff : 0000:01:00.1
      58280000-58283fff : igb
    58284000-58287fff : 0000:01:00.0
      58284000-58287fff : igb
  58300000-58303fff : 0000:00:16.0
  58304000-58307fff : 0000:00:16.1
  58308000-5830bfff : 0000:00:16.2
  5830c000-5830ffff : 0000:00:16.3
  58310000-58313fff : 0000:00:16.4
  58314000-58317fff : 0000:00:16.5
  58318000-5831bfff : 0000:00:16.6
  5831c000-5831ffff : 0000:00:16.7
  58320000-58320fff : 0000:00:13.0
  58321000-583213ff : 0000:00:1d.7
    58321000-583213ff : ehci_hcd
  58321400-583217ff : 0000:00:1a.7
    58321400-583217ff : ehci_hcd
  58321800-583218ff : 0000:00:1f.3
a0000000-a000ffff : mpt
a0010000-a0013fff : mpt
a0100000-a011ffff : igb
a0120000-a013ffff : igb
a0140000-a015ffff : igb
a0160000-a017ffff : igb
a0180000-a0183fff : igb
a0184000-a0187fff : igb
fea00000-fea0001f : pnp 00:01
fec00000-fecfffff : PNP0003:00
  fec40000-fec7ffff : PNP0003:01
fed1b000-fed1bfff : pnp 00:01
fed1c000-fed8bffe : pnp 00:01
fee00000-feefffff : pnp 00:01
ff000000-ffffffff : pnp 00:01
100000000-3ffffffff : System RAM
440000000-4faad5fff : System RAM
4faad6000-4fafa5fff : System RAM
4fafa6000-4fb00bfff : reserved
4fb00c000-4fb05dfff : System RAM
4fb05e000-4fb0b9fff : System RAM
4fb0ba000-4fb0d1fff : System RAM
4fb0d2000-4fb0dbfff : System RAM
  4fb0d2018-4fb0d4118 : EFI Memory Map
  4fb0d6018-4fb0d6068 : Boot parameter
4fb0dc000-4fb0e7fff : System RAM
4fb0e8000-4fb0e9fff : reserved
4fb0ea000-4fb0effff : System RAM
4fb0f0000-4fb113fff : System RAM
4fb114000-4fb115fff : System RAM
4fb116000-4fb153fff : System RAM
4fb154000-4fb155fff : System RAM
4fb156000-4fbffffff : System RAM
4fc000000-4ffffffff : reserved
1fffffc000000-1fffffc33dcf7 : PCI Bus 0000:00 I/O Ports 00000000-00000cf7
1fffffc400000-1fffffe3fffff : PCI Bus 0000:00 I/O Ports 00001000-00008fff
1fffffe400000-1fffffffffffe : PCI Bus 0000:80 I/O Ports 00009000-0000fffe

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-26 19:58 ` Tony Luck
@ 2015-01-26 21:02   ` Bjorn Helgaas
  2015-01-26 21:24     ` Tony Luck
  0 siblings, 1 reply; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-26 21:02 UTC (permalink / raw)
  To: Tony Luck
  Cc: Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Yinghai Lu, Marek Kordik,
	Alex Williamson, Andreas Hartmann, Alexey Voronkov, David Airlie,
	Alex Deucher

On Mon, Jan 26, 2015 at 1:58 PM, Tony Luck <tony.luck@gmail.com> wrote:
> I'm seeing these new messages in v3.19-rc6 on ia64:

Hi Tony,

Sorry for the inconvenience.  Can you collect a complete dmesg log and
"lspci -vv" output, too (from the kernel with the reverted commit)?
That will have more useful information than just /proc/iomem.

> pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
> no compatible bridge window

These are option ROMs, probably just not assigned.  We should be able
to assign space for them, so this might not even be a problem, but we
certainly need a better message if that's all it is.

> pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
> no compatible bridge window
> pci 0000:03:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]:
> no compatible bridge window
> pci 0000:0b:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]:
> no compatible bridge window
> pci 0000:80:13.0: can't claim BAR 0 [mem 0xa0220000-0xa0220fff]: no
> compatible bridge window

Interesting.  There's no mention of bus 80 at all in /proc/iomem;
maybe this is found by blind probing?  Do we even do that on ia64?
Dmesg should have a clue.

> pci 0000:80:16.0: can't claim BAR 0 [mem 0xa0200000-0xa0203fff 64bit]:
> no compatible bridge window
> pci 0000:80:16.1: can't claim BAR 0 [mem 0xa0204000-0xa0207fff 64bit]:
> no compatible bridge window
> pci 0000:80:16.2: can't claim BAR 0 [mem 0xa0208000-0xa020bfff 64bit]:
> no compatible bridge window
> pci 0000:80:16.3: can't claim BAR 0 [mem 0xa020c000-0xa020ffff 64bit]:
> no compatible bridge window
> pci 0000:80:16.4: can't claim BAR 0 [mem 0xa0210000-0xa0213fff 64bit]:
> no compatible bridge window
> pci 0000:80:16.5: can't claim BAR 0 [mem 0xa0214000-0xa0217fff 64bit]:
> no compatible bridge window
> pci 0000:80:16.6: can't claim BAR 0 [mem 0xa0218000-0xa021bfff 64bit]:
> no compatible bridge window
> pci 0000:80:16.7: can't claim BAR 0 [mem 0xa021c000-0xa021ffff 64bit]:
> no compatible bridge window
> pci 0000:80:01.0: can't claim BAR 8 [mem 0xa0100000-0xa01fffff]: no
> compatible bridge window

Looks like a bridge window (assuming you have CONFIG_PCI_IOV unset).
There's definitely something wrong -- all those mpt and igb devices at
the top level *should* be under some PCI hierarchy, but the hierarchy
is missing from iomem.

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-26 21:02   ` Bjorn Helgaas
@ 2015-01-26 21:24     ` Tony Luck
  2015-01-26 23:53       ` Bjorn Helgaas
  2015-01-27  3:43       ` Yinghai Lu
  0 siblings, 2 replies; 17+ messages in thread
From: Tony Luck @ 2015-01-26 21:24 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Yinghai Lu, Marek Kordik,
	Alex Williamson, Andreas Hartmann, Alexey Voronkov, David Airlie,
	Alex Deucher

[-- Attachment #1: Type: text/plain, Size: 367 bytes --]

On Mon, Jan 26, 2015 at 1:02 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> Sorry for the inconvenience.  Can you collect a complete dmesg log and
> "lspci -vv" output, too (from the kernel with the reverted commit)?
> That will have more useful information than just /proc/iomem.

Full dmesg, lspci -vv, and bonus .config (CONFIG_PCI_IOV is indeed
not set)

-Tony

[-- Attachment #2: dmesg --]
[-- Type: application/octet-stream, Size: 38415 bytes --]

Initializing cgroup subsys cpuset
Linux version 3.19.0-rc6-bisect-00001-gf70ed8d (aegl@linux-bxb1) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #8 SMP Mon Jan 26 11:45:58 PST 2015
EFI v2.10 by EDK II:
efi:  SALsystab=0x3e81e418  ACPI 2.0=0x3da42014  SMBIOS=0x3a249000 
booting generic kernel on platform dig
Early serial console at I/O port 0x3f8 (options '')
bootconsole [uart0] enabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003DA42014 000024 (v02 INTEL )
ACPI: XSDT 0x000000003DA42120 00004C (v01 INTEL  BXBIOH   00000002      01000013)
ACPI: FACP 0x000000003A26C000 0000F4 (v04 INTEL  BXBIOH   00000002      00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20141107/tbfadt-618)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20141107/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20141107/tbfadt-699)
ACPI: DSDT 0x000000003A24A000 019928 (v01 INTEL  BXBIOH   00000002 INTL 20080926)
ACPI: FACS 0x000000003A4EA000 000040
ACPI: APIC 0x000000003A26A000 0002D0 (v01 INTEL  BXBIOH   00000002      00000000)
ACPI: SLIT 0x000000003A268000 00003C (v01 INTEL  BXBIOH   00000002      00000000)
ACPI: SPCR 0x000000003A266000 000050 (v01 INTEL  BXBIOH   00000002      00000000)
ACPI: SRAT 0x000000003A264000 000550 (v01 INTEL  BXBIOH   00000002      00000000)
ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
32 CPUs available, 32 CPUs total
Number of logical nodes in system = 1
Number of memory chunks in system = 3
SMP: Allowing 32 CPUs, 0 hotplug CPUs
Initial ramdisk at: 0xe0000004faad6000 (5044179 bytes)
SAL 3.20:  version 0.0
SAL: AP wakeup using external interrupt vector 0xf0
MCA related initialization done
Virtual mem_map starts at 0xa07ffffffee80000
Zone ranges:
  DMA      [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x4fbffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x01000000-0x3a23ffff]
  node   0: [mem 0x3a270000-0x3a4dffff]
  node   0: [mem 0x3a540000-0x3a59ffff]
  node   0: [mem 0x3a6c0000-0x3a6dffff]
  node   0: [mem 0x3a780000-0x3ac3ffff]
  node   0: [mem 0x3acb0000-0x3ad4ffff]
  node   0: [mem 0x3ad70000-0x3ad8ffff]
  node   0: [mem 0x3adb0000-0x3adcffff]
  node   0: [mem 0x3ae40000-0x3ae4ffff]
  node   0: [mem 0x3ae60000-0x3ae7ffff]
  node   0: [mem 0x3b280000-0x3b2dffff]
  node   0: [mem 0x3b2f0000-0x3b39ffff]
  node   0: [mem 0x3b3c0000-0x3b92ffff]
  node   0: [mem 0x3b960000-0x3b97ffff]
  node   0: [mem 0x3c0f0000-0x3c15ffff]
  node   0: [mem 0x3c180000-0x3c20ffff]
  node   0: [mem 0x3c230000-0x3c7dffff]
  node   0: [mem 0x3c7f0000-0x3c88ffff]
  node   0: [mem 0x3c8b0000-0x3c8bffff]
  node   0: [mem 0x3c8e0000-0x3ca4ffff]
  node   0: [mem 0x3ca60000-0x3caaffff]
  node   0: [mem 0x3cac0000-0x3cc7ffff]
  node   0: [mem 0x3cc90000-0x3cdcffff]
  node   0: [mem 0x3cde0000-0x3ce2ffff]
  node   0: [mem 0x3ce40000-0x3d9effff]
  node   0: [mem 0x3da00000-0x3da3ffff]
  node   0: [mem 0x3da50000-0x3e7fffff]
  node   0: [mem 0x3e820000-0x3f8cffff]
  node   0: [mem 0x3fdd0000-0x3fdeffff]
  node   0: [mem 0x100000000-0x3ffffffff]
  node   0: [mem 0x440000000-0x4faf9ffff]
  node   0: [mem 0x4fb010000-0x4fb0dffff]
  node   0: [mem 0x4fb0f0000-0x4fbffffff]
Initmem setup node 0 [mem 0x01000000-0x4fbffffff]
On node 0 totalpages: 260480
free_area_init_node: node 0, pgdat e000000001900000, node_mem_map a07ffffffee83800
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 15752 pages, LIFO batch:1
  Normal zone: 224 pages used for memmap
  Normal zone: 244728 pages, LIFO batch:1
pcpu-alloc: s28288 r8192 d225664 u262144 alloc=4*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 
pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 
pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 260200
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi0:\efi\SuSE\l-bisect.gz  console=tty1 console=uart,io,0x3f8 intel_iommu=off root=/dev/sda3
Intel-IOMMU: disabled
PID hash table entries: 4096 (order: -1, 32768 bytes)
Sorting __ex_table...
software IO TLB [mem 0x05e70000-0x09e70000] (64MB) mapped at [e000000005e70000-e000000009e6ffff]
Memory: 16544320K/16670720K available (12513K kernel code, 5851K rwdata, 1916K rodata, 1088K init, 8144K bss, 126400K reserved, 0K cma-reserved)
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1024
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS:1024
ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector 30
PLATFORM int PMI (0x1): GSI 23 (edge, low) -> CPU 0 (0x0000) vector 0
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
CPU 0: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
Console: colour VGA+ 80x25
console [tty1] enabled
Calibrating delay loop... 3641.34 BogoMIPS (lpj=7282688)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 2, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes)
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 62 cycles)
CPU 1: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 2: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 668 cycles)
CPU 2: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 662 cycles)
CPU 3: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 4: synchronized ITC with CPU 0 (last diff 3 cycles, maxerr 668 cycles)
CPU 4: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 5: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 662 cycles)
CPU 5: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 668 cycles)
CPU 6: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 7: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 662 cycles)
CPU 7: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 8: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 754 cycles)
CPU 8: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 9: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 746 cycles)
CPU 9: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 10: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 754 cycles)
CPU 10: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 11: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 746 cycles)
CPU 11: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 12: synchronized ITC with CPU 0 (last diff -3 cycles, maxerr 753 cycles)
CPU 12: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 13: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 746 cycles)
CPU 13: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 14: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 754 cycles)
CPU 14: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 15: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 749 cycles)
CPU 15: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 16: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 707 cycles)
CPU 16: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 17: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 701 cycles)
CPU 17: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 18: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 704 cycles)
CPU 18: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 19: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 704 cycles)
CPU 19: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 20: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 704 cycles)
CPU 20: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 21: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 702 cycles)
CPU 21: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 22: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 707 cycles)
CPU 22: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 23: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 702 cycles)
CPU 23: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 24: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 758 cycles)
CPU 24: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 25: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 755 cycles)
CPU 25: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 26: synchronized ITC with CPU 0 (last diff -4 cycles, maxerr 753 cycles)
CPU 26: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 27: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 753 cycles)
CPU 27: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 28: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 757 cycles)
CPU 28: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 29: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 753 cycles)
CPU 29: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 30: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 760 cycles)
CPU 30: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 31: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 753 cycles)
CPU 31: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
Brought up 32 CPUs
Total of 32 processors activated (116523.00 BogoMIPS).
SMBIOS 2.4 present.
DMI: Supermicro I8QBH/I8QBH, BIOS I8QBH 15.006.004RAS 2010/05/10
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control
acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
acpi PNP0A08:00: host bridge window [io  0x1000-0x8fff]
acpi PNP0A08:00: host bridge window [mem 0x50000000-0x9fffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x1000-0x8fff]
pci_bus 0000:00: root bus resource [mem 0x50000000-0x9fffffff]
pci_bus 0000:00: root bus resource [bus 00-7f]
pci 0000:00:00.0: [8086:3407] type 00 class 0x060000
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:00:0d.7: [8086:341b] type 00 class 0x060000
pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:00:0f.0: [8086:3424] type 00 class 0x110100
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0x58320000-0x58320fff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0x58300000-0x58303fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0x58304000-0x58307fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0x58308000-0x5830bfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0x5830c000-0x5830ffff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0x58310000-0x58313fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0x58314000-0x58317fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0x58318000-0x5831bfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0x5831c000-0x5831ffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x40c0-0x40df]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x40a0-0x40bf]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
pci 0000:00:1a.2: reg 0x20: [io  0x4080-0x409f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0x58321400-0x583217ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x4060-0x407f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x4040-0x405f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x4020-0x403f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x58321000-0x583213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x4138-0x413f]
pci 0000:00:1f.2: reg 0x14: [io  0x414c-0x414f]
pci 0000:00:1f.2: reg 0x18: [io  0x4130-0x4137]
pci 0000:00:1f.2: reg 0x1c: [io  0x4148-0x414b]
pci 0000:00:1f.2: reg 0x20: [io  0x4110-0x411f]
pci 0000:00:1f.2: reg 0x24: [io  0x4100-0x410f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x58321800-0x583218ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0x4128-0x412f]
pci 0000:00:1f.5: reg 0x14: [io  0x4144-0x4147]
pci 0000:00:1f.5: reg 0x18: [io  0x4120-0x4127]
pci 0000:00:1f.5: reg 0x1c: [io  0x4140-0x4143]
pci 0000:00:1f.5: reg 0x20: [io  0x40f0-0x40ff]
pci 0000:00:1f.5: reg 0x24: [io  0x40e0-0x40ef]
pci 0000:01:00.0: [8086:10c9] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0x58260000-0x5827ffff]
pci 0000:01:00.0: reg 0x14: [mem 0x58240000-0x5825ffff]
pci 0000:01:00.0: reg 0x18: [io  0x3020-0x303f]
pci 0000:01:00.0: reg 0x1c: [mem 0x58284000-0x58287fff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [8086:10c9] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0x58220000-0x5823ffff]
pci 0000:01:00.1: reg 0x14: [mem 0x58200000-0x5821ffff]
pci 0000:01:00.1: reg 0x18: [io  0x3000-0x301f]
pci 0000:01:00.1: reg 0x1c: [mem 0x58280000-0x58283fff]
pci 0000:01:00.1: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:01.0:   bridge window [mem 0x58200000-0x582fffff]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1000:0058] type 00 class 0x010000
pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
pci 0000:03:00.0: reg 0x14: [mem 0x58110000-0x58113fff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0x58100000-0x5810ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffe00000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:05.0:   bridge window [mem 0x58100000-0x581fffff]
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:0b:04.0: [1002:515e] type 00 class 0x030000
pci 0000:0b:04.0: reg 0x10: [mem 0x50000000-0x57ffffff pref]
pci 0000:0b:04.0: reg 0x14: [io  0x1000-0x10ff]
pci 0000:0b:04.0: reg 0x18: [mem 0x58000000-0x5800ffff]
pci 0000:0b:04.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0b:04.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x580fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x8fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x9fffffff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A08:01: PCIe port services disabled; not requesting _OSC control
acpi PNP0A08:01: host bridge window [io  0x9000-0xfffe]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io  0x9000-0xfffe]
pci_bus 0000:80: root bus resource [bus 80-ff]
pci 0000:80:00.0: [8086:3407] type 00 class 0x060000
pci 0000:80:01.0: [8086:3408] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: [8086:340a] type 01 class 0x060400
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:05.0: [8086:340c] type 01 class 0x060400
pci 0000:80:05.0: PME# supported from D0 D3hot D3cold
pci 0000:80:07.0: [8086:340e] type 01 class 0x060400
pci 0000:80:07.0: PME# supported from D0 D3hot D3cold
pci 0000:80:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:80:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:80:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:80:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:80:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:80:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:80:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:80:0d.7: [8086:341b] type 00 class 0x060000
pci 0000:80:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:80:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:80:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:80:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:80:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:80:0f.0: [8086:3424] type 00 class 0x110100
pci 0000:80:10.0: [8086:3425] type 00 class 0x080000
pci 0000:80:10.1: [8086:3426] type 00 class 0x080000
pci 0000:80:11.0: [8086:3427] type 00 class 0x080000
pci 0000:80:11.1: [8086:3428] type 00 class 0x080000
pci 0000:80:13.0: [8086:342d] type 00 class 0x080020
pci 0000:80:13.0: reg 0x10: [mem 0xa0220000-0xa0220fff]
pci 0000:80:13.0: PME# supported from D0 D3hot D3cold
pci 0000:80:14.0: [8086:342e] type 00 class 0x080000
pci 0000:80:14.1: [8086:3422] type 00 class 0x080000
pci 0000:80:14.2: [8086:3423] type 00 class 0x080000
pci 0000:80:14.3: [8086:3438] type 00 class 0x080000
pci 0000:80:15.0: [8086:342f] type 00 class 0x080020
pci 0000:80:16.0: [8086:3430] type 00 class 0x088000
pci 0000:80:16.0: reg 0x10: [mem 0xa0200000-0xa0203fff 64bit]
pci 0000:80:16.1: [8086:3431] type 00 class 0x088000
pci 0000:80:16.1: reg 0x10: [mem 0xa0204000-0xa0207fff 64bit]
pci 0000:80:16.2: [8086:3432] type 00 class 0x088000
pci 0000:80:16.2: reg 0x10: [mem 0xa0208000-0xa020bfff 64bit]
pci 0000:80:16.3: [8086:3433] type 00 class 0x088000
pci 0000:80:16.3: reg 0x10: [mem 0xa020c000-0xa020ffff 64bit]
pci 0000:80:16.4: [8086:3429] type 00 class 0x088000
pci 0000:80:16.4: reg 0x10: [mem 0xa0210000-0xa0213fff 64bit]
pci 0000:80:16.5: [8086:342a] type 00 class 0x088000
pci 0000:80:16.5: reg 0x10: [mem 0xa0214000-0xa0217fff 64bit]
pci 0000:80:16.6: [8086:342b] type 00 class 0x088000
pci 0000:80:16.6: reg 0x10: [mem 0xa0218000-0xa021bfff 64bit]
pci 0000:80:16.7: [8086:342c] type 00 class 0x088000
pci 0000:80:16.7: reg 0x10: [mem 0xa021c000-0xa021ffff 64bit]
acpiphp: Slot [0] registered
pci 0000:81:00.0: [8086:10c9] type 00 class 0x020000
pci 0000:81:00.0: reg 0x10: [mem 0xa0160000-0xa017ffff]
pci 0000:81:00.0: reg 0x14: [mem 0xa0140000-0xa015ffff]
pci 0000:81:00.0: reg 0x18: [io  0xa020-0xa03f]
pci 0000:81:00.0: reg 0x1c: [mem 0xa0184000-0xa0187fff]
pci 0000:81:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:81:00.0: PME# supported from D0 D3hot D3cold
pci 0000:81:00.1: [8086:10c9] type 00 class 0x020000
pci 0000:81:00.1: reg 0x10: [mem 0xa0120000-0xa013ffff]
pci 0000:81:00.1: reg 0x14: [mem 0xa0100000-0xa011ffff]
pci 0000:81:00.1: reg 0x18: [io  0xa000-0xa01f]
pci 0000:81:00.1: reg 0x1c: [mem 0xa0180000-0xa0183fff]
pci 0000:81:00.1: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:81:00.1: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:01.0:   bridge window [io  0xa000-0xafff]
pci 0000:80:01.0:   bridge window [mem 0xa0100000-0xa01fffff]
acpiphp: Slot [0-1] registered
pci 0000:80:03.0: PCI bridge to [bus 82]
acpiphp: Slot [0-2] registered
pci 0000:83:00.0: [1000:0058] type 00 class 0x010000
pci 0000:83:00.0: reg 0x10: [io  0x9000-0x90ff]
pci 0000:83:00.0: reg 0x14: [mem 0xa0010000-0xa0013fff 64bit]
pci 0000:83:00.0: reg 0x1c: [mem 0xa0000000-0xa000ffff 64bit]
pci 0000:83:00.0: reg 0x30: [mem 0xffe00000-0xffffffff pref]
pci 0000:83:00.0: supports D1 D2
pci 0000:80:05.0: PCI bridge to [bus 83]
pci 0000:80:05.0:   bridge window [io  0x9000-0x9fff]
pci 0000:80:05.0:   bridge window [mem 0xa0000000-0xa00fffff]
acpiphp: Slot [0-3] registered
pci 0000:80:07.0: PCI bridge to [bus 84]
ACPI: Enabled 7 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:0b:04.0
vgaarb: device added: PCI:0000:0b:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:04.0
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Switched to clocksource itc
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed8bffe] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 4, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 2, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes)
NET: Registered protocol family 1
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49 unregistered
GSI 17 (level, low) -> CPU 1 (0x0100) vector 49
GSI 17 (level, low) -> CPU 1 (0x0100) vector 49 unregistered
GSI 18 (level, low) -> CPU 2 (0x0200) vector 49
GSI 18 (level, low) -> CPU 2 (0x0200) vector 49 unregistered
GSI 18 (level, low) -> CPU 3 (0x0300) vector 49
GSI 18 (level, low) -> CPU 3 (0x0300) vector 49 unregistered
GSI 16 (level, low) -> CPU 4 (0x0400) vector 49
GSI 16 (level, low) -> CPU 4 (0x0400) vector 49 unregistered
GSI 17 (level, low) -> CPU 5 (0x0500) vector 49
GSI 17 (level, low) -> CPU 5 (0x0500) vector 49 unregistered
random: nonblocking pool is initialized
GSI 18 (level, low) -> CPU 6 (0x0600) vector 49
GSI 18 (level, low) -> CPU 6 (0x0600) vector 49 unregistered
GSI 16 (level, low) -> CPU 7 (0x0700) vector 49
GSI 16 (level, low) -> CPU 7 (0x0700) vector 49 unregistered
pci 0000:0b:04.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 128 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4864kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
futex hash table entries: 8192 (order: 4, 1048576 bytes)
HugeTLB registered 256 MB page size, pre-allocated 0 pages
SGI XFS with security attributes, no debug enabled
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:02: ttyS0 at I/O 0x3f8 (irq = 44, base_baud = 115200) is a 16550A
console [ttyS0] enabled
bootconsole [uart0] disabled
00:03: ttyS1 at I/O 0x2f8 (irq = 45, base_baud = 115200) is a 16550A
EFI Time Services Driver v0.4
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ata_piix 0000:00:1f.2: version 2.13
GSI 17 (level, low) -> CPU 8 (0x1000) vector 49
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x4138 ctl 0x414c bmdma 0x4110 irq 50
ata2: SATA max UDMA/133 cmd 0x4130 ctl 0x4148 bmdma 0x4118 irq 50
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x4128 ctl 0x4144 bmdma 0x40f0 irq 50
ata4: SATA max UDMA/133 cmd 0x4120 ctl 0x4140 bmdma 0x40f8 irq 50
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
igb: Copyright (c) 2007-2014 Intel Corporation.
GSI 28 (level, low) -> CPU 9 (0x1100) vector 50
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3a
igb 0000:01:00.0: eth0: PBA No: Unknown
igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
GSI 40 (level, low) -> CPU 10 (0x1200) vector 60
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata1.00: SATA link down (SStatus 0 SControl 300)
igb 0000:01:00.1: added PHC on eth1
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3b
igb 0000:01:00.1: eth1: PBA No: Unknown
igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
pci 0000:80:01.0: can't enable device: BAR 8 [mem 0xa0100000-0xa01fffff] not claimed
pci 0000:80:01.0: Error enabling bridge (-22), continuing
GSI 52 (level, low) -> CPU 11 (0x1300) vector 70
ata1.01: SATA link down (SStatus 0 SControl 300)
igb 0000:81:00.0: added PHC on eth2
igb 0000:81:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:81:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b0
igb 0000:81:00.0: eth2: PBA No: Unknown
igb 0000:81:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
pci 0000:80:01.0: can't enable device: BAR 8 [mem 0xa0100000-0xa01fffff] not claimed
pci 0000:80:01.0: Error enabling bridge (-22), continuing
GSI 64 (level, low) -> CPU 12 (0x1400) vector 80
igb 0000:81:00.1: added PHC on eth3
igb 0000:81:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:81:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b1
igb 0000:81:00.1: eth3: PBA No: Unknown
igb 0000:81:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
GSI 26 (level, low) -> CPU 13 (0x1500) vector 90
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068E B3: Capabilities={Initiator}
scsi host4: ioc0: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=92
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecb8f49
scsi 4:0:0:0: Direct-Access     SEAGATE  ST9146802SS      0003 PQ: 0 ANSI: 5
pci 0000:80:05.0: can't enable device: BAR 8 [mem 0xa0000000-0xa00fffff] not claimed
pci 0000:80:05.0: Error enabling bridge (-22), continuing
sd 4:0:0:0: [sda] 286749488 512-byte logical blocks: (146 GB/136 GiB)
GSI 50 (level, low) -> CPU 14 (0x1600) vector 91
mptbase: ioc1: Initiating bringup
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: b3 00 10 08
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
ioc1: LSISAS1068E B3: Capabilities={Initiator}
scsi host5: ioc1: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=93
mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecada69
scsi 5:0:0:0: Direct-Access     SEAGATE  ST9146802SS      0003 PQ: 0 ANSI: 5
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
sd 5:0:0:0: [sdb] 286749488 512-byte logical blocks: (146 GB/136 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: b3 00 10 08
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
TCP: cubic registered
NET: Registered protocol family 17
console [netcon0] enabled
netconsole: network logging started
 sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1088K (e000000004f30000 - e000000005040000)
udevd (1770): /proc/1770/oom_adj is deprecated, please use /proc/1770/oom_score_adj instead.
udevd version 128 started
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
GSI 16 (level, low) -> CPU 15 (0x1700) vector 92
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 49, io base 0x000040c0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 50, io base 0x000040a0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 (level, low) -> CPU 16 (0x2000) vector 93
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 51, io base 0x00004080
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 49, io base 0x00004060
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 50, io base 0x00004040
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 51, io base 0x00004020
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 6-1: new low-speed USB device number 2 using uhci_hcd
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): using internal journal
EXT3-fs (sda3): mounted filesystem with ordered data mode
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1/0003:0624:0200.0001/input/input0
hid-generic 0003:0624:0200.0001: input: USB HID v1.10 Mouse [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input1
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/0003:0624:0200.0002/input/input1
hid-generic 0003:0624:0200.0002: input: USB HID v1.10 Keyboard [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
udevd version 128 started
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 128 is not supported
ehci-pci 0000:00:1a.7: irq 51, io mem 0x58321400
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 6-1: USB disconnect, device number 2
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 128 is not supported
ehci-pci 0000:00:1d.7: irq 49, io mem 0x58321000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 6-1: new low-speed USB device number 3 using uhci_hcd
Adding 8191936k swap on /dev/sda2.  Priority:-1 extents:1 across:8191936k 
Adding 8185024k swap on /dev/sdb1.  Priority:-2 extents:1 across:8185024k 
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/0003:0624:0200.0003/input/input4
hid-generic 0003:0624:0200.0003: input: USB HID v1.10 Keyboard [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input0
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1/0003:0624:0200.0004/input/input5
hid-generic 0003:0624:0200.0004: input: USB HID v1.10 Mouse [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input1
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with ordered data mode
igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kernel unaligned access to 0xe000000320cf000e, ip=0xa000000100a9b470
kernel unaligned access to 0xe000000320d0000e, ip=0xa000000100a9b470
kernel unaligned access to 0xe000000320d2000e, ip=0xa000000100a9b470
kernel unaligned access to 0xe000000320d6000e, ip=0xa000000100a9b470
kernel unaligned access to 0xe000000320d7000e, ip=0xa000000100a9b470
ia64_handle_unaligned: 2 callbacks suppressed
kernel unaligned access to 0xe000000003f4000e, ip=0xa000000100a9b470
kernel unaligned access to 0xe000000003f7000e, ip=0xa000000100a9b470
kernel unaligned access to 0xe00000000c00000e, ip=0xa000000100a9b470

[-- Attachment #3: lspci --]
[-- Type: application/octet-stream, Size: 150428 bytes --]

00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 22)
	Subsystem: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 255
	Capabilities: [40] #00 [0000]

00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 58200000-582fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 256 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x4, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd+
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
	Capabilities: [160] Vendor Specific Information <?>

00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 5GT/s, Width x8, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
	Capabilities: [160] Vendor Specific Information <?>

00:05.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: 58100000-581fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 5GT/s, Width x8, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 5GT/s, Width x16, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
	Capabilities: [160] Vendor Specific Information <?>

00:0d.0 Host bridge: Intel Corporation Device 343a (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>
	Capabilities: [800] Vendor Specific Information <?>

00:0d.1 Host bridge: Intel Corporation Device 343b (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>
	Capabilities: [800] Vendor Specific Information <?>

00:0d.2 Host bridge: Intel Corporation Device 343c (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0d.3 Host bridge: Intel Corporation Device 343d (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>

00:0d.4 Host bridge: Intel Corporation 5520/5500/X58 Physical Layer Port 0 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0d.5 Host bridge: Intel Corporation 5520/5500 Physical Layer Port 1 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0d.6 Host bridge: Intel Corporation Device 341a (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0d.7 Host bridge: Intel Corporation Device 341b (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 0
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

00:0e.0 Host bridge: Intel Corporation Device 341c (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>

00:0e.1 Host bridge: Intel Corporation Device 341d (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0e.2 Host bridge: Intel Corporation Device 341e (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0e.3 Host bridge: Intel Corporation Device 341f (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

00:0e.4 Host bridge: Intel Corporation Device 3439 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

00:0f.0 Performance counters: Intel Corporation Device 3424 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

00:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [50] Vendor Specific Information <?>

00:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [50] Vendor Specific Information <?>

00:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 22) (prog-if 20 [IO(X)-APIC])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Region 0: Memory at 58320000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [6c] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 22) (prog-if 20 [IO(X)-APIC])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:16.0 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at 58300000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at 58304000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.2 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 255
	Region 0: Memory at 58308000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.3 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 255
	Region 0: Memory at 5830c000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.4 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at 58310000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.5 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at 58314000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.6 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 255
	Region 0: Memory at 58318000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:16.7 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 255
	Region 0: Memory at 5831c000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 49
	Region 4: I/O ports at 40c0 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd

00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 50
	Region 4: I/O ports at 40a0 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd

00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 51
	Region 4: I/O ports at 4080 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd

00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 (prog-if 20 [EHCI])
	Subsystem: Device 0225:7200
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 51
	Region 0: Memory at 58321400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCIe advanced features <?>
	Kernel driver in use: ehci-pci

00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>

00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>

00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #3, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>

00:1c.3 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 4 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>

00:1c.4 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 5 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>

00:1c.5 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 6 (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v1) Root Port (Slot-), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #6, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
			ClockPM- Suprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Count=1/1 Enable-
		Address: 00000000  Data: 0000
	Capabilities: [90] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Virtual Channel <?>
	Capabilities: [180] Root Complex Link <?>

00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 49
	Region 4: I/O ports at 4060 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 50
	Region 4: I/O ports at 4040 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 (prog-if 00 [UHCI])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 51
	Region 4: I/O ports at 4020 [size=32]
	Capabilities: [50] PCIe advanced features <?>
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 (prog-if 20 [EHCI])
	Subsystem: Device 2120:0024
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 49
	Region 0: Memory at 58321000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCIe advanced features <?>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=32
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 50000000-580fffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Gammagraphx, Inc. (or missing ID) Device 0000

00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: [e0] Vendor Specific Information <?>

00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 (prog-if 8f [Master SecP SecO PriP PriO])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 50
	Region 0: I/O ports at 4138 [size=8]
	Region 1: I/O ports at 414c [size=4]
	Region 2: I/O ports at 4130 [size=8]
	Region 3: I/O ports at 4148 [size=4]
	Region 4: I/O ports at 4110 [size=16]
	Region 5: I/O ports at 4100 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ata_piix

00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 255
	Region 0: Memory at 58321800 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 4000 [size=32]

00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 (prog-if 85 [Master SecO PriO])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 50
	Region 0: I/O ports at 4128 [size=8]
	Region 1: I/O ports at 4144 [size=4]
	Region 2: I/O ports at 4120 [size=8]
	Region 3: I/O ports at 4140 [size=4]
	Region 4: I/O ports at 40f0 [size=16]
	Region 5: I/O ports at 40e0 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCIe advanced features <?>
	Kernel driver in use: ata_piix

01:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at 58260000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at 58240000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 3020 [size=32]
	Region 3: Memory at 58284000 (32-bit, non-prefetchable) [size=16K]
	Expansion ROM at fffe0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1 Enable-
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10
		Vector table: BAR=3 offset=00000000
		PBA: BAR=3 offset=00002000
	Capabilities: [a0] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
			MaxPayload 256 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
		DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140] Device Serial Number 3a-19-fe-ff-ff-48-30-00
	Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
		ARICap:	MFVC- ACS-, Next Function: 1
		ARICtl:	MFVC- ACS-, Function Group: 0
	Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
		IOVCap:	Migration-, Interrupt Message Number: 000
		IOVCtl:	Enable- Migration- Interrupt- MSE- ARIHierarchy-
		IOVSta:	Migration-
		Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
		VF offset: 384, stride: 2, Device ID: 10ca
		Supported Page Size: 00000553, System Page Size: 00000001
		VF Migration: offset: 00000000, BIR: 1
	Kernel driver in use: igb

01:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 62
	Region 0: Memory at 58220000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at 58200000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 3000 [size=32]
	Region 3: Memory at 58280000 (32-bit, non-prefetchable) [size=16K]
	Expansion ROM at fffe0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1 Enable-
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10
		Vector table: BAR=3 offset=00000000
		PBA: BAR=3 offset=00002000
	Capabilities: [a0] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
			MaxPayload 256 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
		DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140] Device Serial Number 3a-19-fe-ff-ff-48-30-00
	Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
		ARICap:	MFVC- ACS-, Next Function: 0
		ARICtl:	MFVC- ACS-, Function Group: 0
	Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
		IOVCap:	Migration-, Interrupt Message Number: 000
		IOVCtl:	Enable- Migration- Interrupt- MSE- ARIHierarchy-
		IOVSta:	Migration-
		Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 01
		VF offset: 384, stride: 2, Device ID: 10ca
		Supported Page Size: 00000553, System Page Size: 00000001
		VF Migration: offset: 00000000, BIR: 1
	Kernel driver in use: igb

03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
	Subsystem: Super Micro Computer Inc Device a680
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 92
	Region 0: I/O ports at 2000 [size=256]
	Region 1: Memory at 58110000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at 58100000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at ffe00000 [disabled] [size=2M]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=1 offset=00002000
		PBA: BAR=1 offset=00003000
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Kernel driver in use: mptsas

0b:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) (prog-if 00 [VGA controller])
	Subsystem: ATI Technologies Inc ES1000
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B+ DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 32 (2000ns min), Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 6
	Region 0: Memory at 50000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at 1000 [size=256]
	Region 2: Memory at 58000000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at fffe0000 [disabled] [size=128K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 22)
	Subsystem: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Capabilities: [40] #00 [0000]

80:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=80, secondary=81, subordinate=81, sec-latency=0
	I/O behind bridge: 0000a000-0000afff
	Memory behind bridge: a0100000-a01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 256 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd+
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
	Capabilities: [160] Vendor Specific Information <?>

80:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=80, secondary=82, subordinate=82, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
	Capabilities: [160] Vendor Specific Information <?>

80:05.0 PCI bridge: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=80, secondary=83, subordinate=83, sec-latency=0
	I/O behind bridge: 00009000-00009fff
	Memory behind bridge: a0000000-a00fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/X58 I/O Hub PCI Express Root Port 5
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #2, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-

80:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 22) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=80, secondary=84, subordinate=84, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Subsystem: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7
	Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Count=1/2 Enable-
		Address: 00000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #3, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <512ns, L1 <4us
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
			Slot #  0, PowerLimit 0.000000; Interlock- NoCompl-
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Off, PwrInd Off, Power+ Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible+
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis+ ARIFwd+
		DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- ARIFwd-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [150] Access Control Services
		ACSCap:	SrcValid+ TransBlk+ ReqRedir+ CmpltRedir+ UpstreamFwd+ EgressCtrl- DirectTrans-
		ACSCtl:	SrcValid- TransBlk- ReqRedir- CmpltRedir- UpstreamFwd- EgressCtrl- DirectTrans-
	Capabilities: [160] Vendor Specific Information <?>

80:0d.0 Host bridge: Intel Corporation Device 343a (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>
	Capabilities: [800] Vendor Specific Information <?>

80:0d.1 Host bridge: Intel Corporation Device 343b (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>
	Capabilities: [800] Vendor Specific Information <?>

80:0d.2 Host bridge: Intel Corporation Device 343c (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0d.3 Host bridge: Intel Corporation Device 343d (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>

80:0d.4 Host bridge: Intel Corporation 5520/5500/X58 Physical Layer Port 0 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0d.5 Host bridge: Intel Corporation 5520/5500 Physical Layer Port 1 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0d.6 Host bridge: Intel Corporation Device 341a (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0d.7 Host bridge: Intel Corporation Device 341b (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 0
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

80:0e.0 Host bridge: Intel Corporation Device 341c (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]
	Capabilities: [100] Vendor Specific Information <?>

80:0e.1 Host bridge: Intel Corporation Device 341d (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0e.2 Host bridge: Intel Corporation Device 341e (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0e.3 Host bridge: Intel Corporation Device 341f (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range BCD, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [60] #00 [0000]

80:0e.4 Host bridge: Intel Corporation Device 3439 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

80:0f.0 Performance counters: Intel Corporation Device 3424 (rev 22)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

80:10.0 PIC: Intel Corporation 5520/5500/X58 Physical and Link Layer Registers Port 0 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [50] Vendor Specific Information <?>

80:10.1 PIC: Intel Corporation 5520/5500/X58 Routing and Protocol Layer Registers Port 0 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

80:11.0 PIC: Intel Corporation 5520/5500 Physical and Link Layer Registers Port 1 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [50] Vendor Specific Information <?>

80:11.1 PIC: Intel Corporation 5520/5500 Routing & Protocol Layer Register Port 1 (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

80:13.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub I/OxAPIC Interrupt Controller (rev 22) (prog-if 20 [IO(X)-APIC])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Region 0: Memory at a0220000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: [6c] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

80:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

80:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
			ClockPM- Suprise+ LLActRep+ BwNot+
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB

80:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 22) (prog-if 00 [8259])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

80:15.0 PIC: Intel Corporation 5520/5500/X58 Trusted Execution Technology Registers (rev 22) (prog-if 20 [IO(X)-APIC])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

80:16.0 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at a0200000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.1 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at a0204000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.2 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 255
	Region 0: Memory at a0208000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.3 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 255
	Region 0: Memory at a020c000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.4 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 255
	Region 0: Memory at a0210000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.5 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 255
	Region 0: Memory at a0214000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.6 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 255
	Region 0: Memory at a0218000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

80:16.7 System peripheral: Intel Corporation 5520/5500/X58 Chipset QuickData Technology Device (rev 22)
	Subsystem: Intel Corporation Device 0000
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 255
	Region 0: Memory at a021c000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: [80] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=0 offset=00002000
		PBA: BAR=0 offset=00003000
	Capabilities: [90] Express (v2) Root Complex Integrated Endpoint, MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [e0] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

81:00.0 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 72
	Region 0: Memory at a0160000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at a0140000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at a020 [size=32]
	Region 3: Memory at a0184000 (32-bit, non-prefetchable) [size=16K]
	Expansion ROM at fffe0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1 Enable-
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10
		Vector table: BAR=3 offset=00000000
		PBA: BAR=3 offset=00002000
	Capabilities: [a0] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
			MaxPayload 256 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
		DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140] Device Serial Number b0-19-fe-ff-ff-48-30-00
	Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
		ARICap:	MFVC- ACS-, Next Function: 1
		ARICtl:	MFVC- ACS-, Function Group: 0
	Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
		IOVCap:	Migration-, Interrupt Message Number: 000
		IOVCtl:	Enable- Migration- Interrupt- MSE- ARIHierarchy-
		IOVSta:	Migration-
		Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 00
		VF offset: 384, stride: 2, Device ID: 10ca
		Supported Page Size: 00000553, System Page Size: 00000001
		VF Migration: offset: 00000000, BIR: 1
	Kernel driver in use: igb

81:00.1 Ethernet controller: Intel Corporation 82576 Gigabit Network Connection (rev 01)
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 82
	Region 0: Memory at a0120000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at a0100000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at a000 [size=32]
	Region 3: Memory at a0180000 (32-bit, non-prefetchable) [size=16K]
	Expansion ROM at fffe0000 [disabled] [size=128K]
	Capabilities: [40] Power Management version 3
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Count=1/1 Enable-
		Address: 0000000000000000  Data: 0000
		Masking: 00000000  Pending: 00000000
	Capabilities: [70] MSI-X: Enable+ Mask- TabSize=10
		Vector table: BAR=3 offset=00000000
		PBA: BAR=3 offset=00002000
	Capabilities: [a0] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 512 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
			MaxPayload 256 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <4us, L1 <64us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
		DevCap2: Completion Timeout: Range ABCD, TimeoutDis+
		DevCtl2: Completion Timeout: 16ms to 55ms, TimeoutDis-
		LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140] Device Serial Number b0-19-fe-ff-ff-48-30-00
	Capabilities: [150] Alternative Routing-ID Interpretation (ARI)
		ARICap:	MFVC- ACS-, Next Function: 0
		ARICtl:	MFVC- ACS-, Function Group: 0
	Capabilities: [160] Single Root I/O Virtualization (SR-IOV)
		IOVCap:	Migration-, Interrupt Message Number: 000
		IOVCtl:	Enable- Migration- Interrupt- MSE- ARIHierarchy-
		IOVSta:	Migration-
		Initial VFs: 8, Total VFs: 8, Number of VFs: 0, Function Dependency Link: 01
		VF offset: 384, stride: 2, Device ID: 10ca
		Supported Page Size: 00000553, System Page Size: 00000001
		VF Migration: offset: 00000000, BIR: 1
	Kernel driver in use: igb

83:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
	Subsystem: Super Micro Computer Inc Device a680
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 93
	Region 0: I/O ports at 9000 [size=256]
	Region 1: Memory at a0010000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at a0000000 (64-bit, non-prefetchable) [size=64K]
	Expansion ROM at ffe00000 [disabled] [size=2M]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
		LnkCap:	Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
			ClockPM- Suprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
		LnkSta:	Speed 2.5GT/s, Width x8, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
	Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Count=1/1 Enable-
		Address: 0000000000000000  Data: 0000
	Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
		Vector table: BAR=1 offset=00002000
		PBA: BAR=1 offset=00003000
	Capabilities: [100] Advanced Error Reporting
		UESta:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSVoil-
		UEMsk:	DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSVoil-
		UESvrt:	DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSVoil-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr-
		AERCap:	First Error Pointer: 14, GenCap+ CGenEn- ChkCap+ ChkEn-
	Kernel driver in use: mptsas


[-- Attachment #4: config --]
[-- Type: application/octet-stream, Size: 68544 bytes --]

#
# Automatically generated file; DO NOT EDIT.
# Linux/ia64 3.19.0-rc6 Kernel Configuration
#
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_IRQ_WORK=y

#
# General setup
#
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
# CONFIG_COMPILE_TEST is not set
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_CROSS_MEMORY_ATTACH=y
# CONFIG_FHANDLE is not set
CONFIG_USELIB=y
# CONFIG_AUDIT is not set
CONFIG_HAVE_ARCH_AUDITSYSCALL=y

#
# IRQ subsystem
#
CONFIG_GENERIC_IRQ_LEGACY=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_GENERIC_MSI_IRQ=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL_OLD=y

#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_VIRT_CPU_ACCOUNTING_NATIVE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set

#
# RCU Subsystem
#
CONFIG_TREE_RCU=y
# CONFIG_TASKS_RCU is not set
CONFIG_RCU_STALL_COMMON=y
CONFIG_RCU_FANOUT=64
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_NOCB_CPU is not set
CONFIG_BUILD_BIN2C=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=20
CONFIG_LOG_CPU_MAX_BUF_SHIFT=12
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
CONFIG_CPUSETS=y
CONFIG_PROC_PID_CPUSET=y
# CONFIG_CGROUP_CPUACCT is not set
# CONFIG_MEMCG is not set
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_SCHED is not set
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
CONFIG_UTS_NS=y
CONFIG_IPC_NS=y
# CONFIG_USER_NS is not set
CONFIG_PID_NS=y
CONFIG_NET_NS=y
# CONFIG_SCHED_AUTOGROUP is not set
# CONFIG_SYSFS_DEPRECATED is not set
# CONFIG_RELAY is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_RD_LZ4=y
CONFIG_INIT_FALLBACK=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_SYSCTL_ARCH_UNALIGN_NO_WARN=y
CONFIG_BPF=y
# CONFIG_EXPERT is not set
# CONFIG_SGETMASK_SYSCALL is not set
CONFIG_SYSFS_SYSCALL=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_BPF_SYSCALL is not set
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_ADVISE_SYSCALLS=y
CONFIG_PCI_QUIRKS=y
# CONFIG_EMBEDDED is not set

#
# Kernel Performance Events And Counters
#
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_SLUB_CPU_PARTIAL=y
# CONFIG_SYSTEM_TRUSTED_KEYRING is not set
# CONFIG_PROFILING is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
# CONFIG_UPROBES is not set
CONFIG_HAVE_64BIT_ALIGNED_ACCESS=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_ARCH_INIT_TASK=y
CONFIG_ARCH_TASK_STRUCT_ALLOCATOR=y
CONFIG_ARCH_THREAD_INFO_ALLOCATOR=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
# CONFIG_CC_STACKPROTECTOR is not set
CONFIG_HAVE_VIRT_CPU_ACCOUNTING=y
CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
CONFIG_MODULES_USE_ELF_RELA=y

#
# GCOV-based kernel profiling
#
# CONFIG_ARCH_HAS_GCOV_PROFILE_ALL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
# CONFIG_MODULE_COMPRESS is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_BLK_CMDLINE_PARSER is not set

#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_AIX_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
CONFIG_SGI_PARTITION=y
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
CONFIG_EFI_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_CMDLINE_PARTITION is not set

#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_INLINE_SPIN_UNLOCK_IRQ=y
CONFIG_INLINE_READ_UNLOCK=y
CONFIG_INLINE_READ_UNLOCK_IRQ=y
CONFIG_INLINE_WRITE_UNLOCK=y
CONFIG_INLINE_WRITE_UNLOCK_IRQ=y
# CONFIG_FREEZER is not set

#
# Processor type and features
#
CONFIG_IA64=y
CONFIG_64BIT=y
CONFIG_ZONE_DMA=y
CONFIG_QUICKLIST=y
CONFIG_MMU=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_SWIOTLB=y
CONFIG_STACKTRACE_SUPPORT=y
# CONFIG_GENERIC_LOCKBREAK is not set
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_DMI=y
CONFIG_EFI=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_IA64_UNCACHED_ALLOCATOR=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_AUDIT_ARCH=y
CONFIG_IA64_GENERIC=y
# CONFIG_IA64_DIG is not set
# CONFIG_IA64_DIG_VTD is not set
# CONFIG_IA64_HP_ZX1 is not set
# CONFIG_IA64_HP_ZX1_SWIOTLB is not set
# CONFIG_IA64_SGI_SN2 is not set
# CONFIG_IA64_SGI_UV is not set
# CONFIG_IA64_HP_SIM is not set
# CONFIG_ITANIUM is not set
CONFIG_MCKINLEY=y
# CONFIG_IA64_PAGE_SIZE_4KB is not set
# CONFIG_IA64_PAGE_SIZE_8KB is not set
# CONFIG_IA64_PAGE_SIZE_16KB is not set
CONFIG_IA64_PAGE_SIZE_64KB=y
CONFIG_PGTABLE_3=y
CONFIG_HZ=250
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
# CONFIG_SCHED_HRTICK is not set
CONFIG_IA64_L1_CACHE_SHIFT=7
CONFIG_IA64_CYCLONE=y
CONFIG_IOSAPIC=y
CONFIG_FORCE_MAX_ZONEORDER=17
CONFIG_SMP=y
CONFIG_NR_CPUS=4096
CONFIG_HOTPLUG_CPU=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_SCHED_SMT is not set
# CONFIG_PERMIT_BSP_REMOVE is not set
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_SELECT_MEMORY_MODEL=y
# CONFIG_FLATMEM_MANUAL is not set
CONFIG_DISCONTIGMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_DISCONTIGMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_NEED_MULTIPLE_NODES=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_NR_QUICK=1
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_CMA is not set
# CONFIG_ZPOOL is not set
# CONFIG_ZBUD is not set
# CONFIG_ZSMALLOC is not set
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_DISCONTIGMEM_ENABLE=y
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y
CONFIG_NUMA=y
CONFIG_NODES_SHIFT=10
CONFIG_VIRTUAL_MEM_MAP=y
CONFIG_HOLES_IN_ZONE=y
# CONFIG_HAVE_ARCH_EARLY_PFN_TO_NID is not set
CONFIG_HAVE_ARCH_NODEDATA_EXTENSION=y
CONFIG_USE_PERCPU_NUMA_NODE_ID=y
CONFIG_HAVE_MEMORYLESS_NODES=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_IA64_MCA_RECOVERY=y
CONFIG_PERFMON=y
CONFIG_IA64_PALINFO=y
# CONFIG_IA64_MC_ERR_INJECT is not set
CONFIG_SGI_SN=y
# CONFIG_IA64_ESI is not set
# CONFIG_IA64_HP_AML_NFW is not set

#
# SN Devices
#
CONFIG_SGI_IOC3=m
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y

#
# Firmware Drivers
#
# CONFIG_FIRMWARE_MEMMAP is not set
CONFIG_EFI_PCDP=y
CONFIG_DMIID=y
# CONFIG_DMI_SYSFS is not set
CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y

#
# EFI (Extensible Firmware Interface) Support
#
CONFIG_EFI_VARS=y
CONFIG_BINFMT_ELF=y
CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS=y
CONFIG_BINFMT_SCRIPT=y
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y

#
# Power management and ACPI options
#
# CONFIG_PM is not set
CONFIG_ACPI=y
CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_HOTPLUG_CPU=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_NUMA=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set
# CONFIG_PMIC_OPREGION is not set

#
# Bus options (PCI, PCMCIA)
#
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_LABEL=y

#
# PCI host controller drivers
#
CONFIG_HOTPLUG_PCI=y
CONFIG_HOTPLUG_PCI_ACPI=y
# CONFIG_HOTPLUG_PCI_ACPI_IBM is not set
# CONFIG_HOTPLUG_PCI_CPCI is not set
# CONFIG_HOTPLUG_PCI_SHPC is not set
# CONFIG_HOTPLUG_PCI_SGI is not set
# CONFIG_PCCARD is not set
CONFIG_NET=y

#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_NET_IP_TUNNEL is not set
# CONFIG_IP_MROUTE is not set
CONFIG_SYN_COOKIES=y
# CONFIG_NET_IPVTI is not set
# CONFIG_NET_UDP_TUNNEL is not set
# CONFIG_NET_FOU is not set
# CONFIG_GENEVE is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
CONFIG_NET_PTP_CLASSIFY=y
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
CONFIG_HAVE_NET_DSA=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=m
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
# CONFIG_VSOCKETS is not set
# CONFIG_NETLINK_MMAP is not set
# CONFIG_NETLINK_DIAG is not set
# CONFIG_NET_MPLS_GSO is not set
# CONFIG_HSR is not set
# CONFIG_NET_SWITCHDEV is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_CGROUP_NET_PRIO is not set
# CONFIG_CGROUP_NET_CLASSID is not set
CONFIG_NET_RX_BUSY_POLL=y
CONFIG_BQL=y
CONFIG_NET_FLOW_LIMIT=y

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
# CONFIG_LIB80211 is not set

#
# CFG80211 needs to be enabled for MAC80211
#
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set

#
# Device Drivers
#

#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
CONFIG_FIRMWARE_IN_KERNEL=y
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set
CONFIG_ALLOW_DEV_COREDUMP=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
# CONFIG_FENCE_TRACE is not set

#
# Bus devices
#
CONFIG_CONNECTOR=y
CONFIG_PROC_EVENTS=y
# CONFIG_MTD is not set
CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set

#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_NULL_BLK is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
CONFIG_BLK_DEV_CRYPTOLOOP=m
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SKD is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
# CONFIG_BLK_DEV_RSXX is not set

#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_DUMMY_IRQ is not set
# CONFIG_PHANTOM is not set
CONFIG_SGI_IOC4=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
CONFIG_SGI_XP=m
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_SRAM is not set
# CONFIG_C2PORT is not set

#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set

#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set

#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set

#
# Intel MIC Bus Driver
#

#
# Intel MIC Host Driver
#

#
# Intel MIC Card Driver
#
# CONFIG_GENWQE is not set
# CONFIG_ECHO is not set
# CONFIG_CXL_BASE is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y

#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEACPI is not set
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y

#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y

#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_OFFBOARD is not set
CONFIG_BLK_DEV_GENERIC=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
CONFIG_BLK_DEV_CMD64X=y
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
CONFIG_BLK_DEV_SGIIOC4=y
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y

#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
CONFIG_SCSI_NETLINK=y
# CONFIG_SCSI_MQ_DEFAULT is not set
CONFIG_SCSI_PROC_FS=y

#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set

#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
CONFIG_SCSI_FC_ATTRS=y
# CONFIG_SCSI_ISCSI_ATTRS is not set
CONFIG_SCSI_SAS_ATTRS=y
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
# CONFIG_ISCSI_BOOT_SYSFS is not set
# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_SCSI_CXGB4_ISCSI is not set
# CONFIG_SCSI_BNX2_ISCSI is not set
# CONFIG_BE2ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_HPSA is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_3W_SAS is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_SCSI_AACRAID is not set
# CONFIG_SCSI_AIC7XXX is not set
# CONFIG_SCSI_AIC79XX is not set
# CONFIG_SCSI_AIC94XX is not set
# CONFIG_SCSI_MVSAS is not set
# CONFIG_SCSI_MVUMI is not set
# CONFIG_SCSI_DPT_I2O is not set
# CONFIG_SCSI_ADVANSYS is not set
# CONFIG_SCSI_ARCMSR is not set
# CONFIG_SCSI_ESAS2R is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_MPT3SAS is not set
# CONFIG_SCSI_UFSHCD is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
# CONFIG_SCSI_INITIO is not set
# CONFIG_SCSI_INIA100 is not set
# CONFIG_SCSI_STEX is not set
CONFIG_SCSI_SYM53C8XX_2=y
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
CONFIG_SCSI_SYM53C8XX_MMIO=y
# CONFIG_SCSI_IPR is not set
CONFIG_SCSI_QLOGIC_1280=y
# CONFIG_SCSI_QLA_FC is not set
# CONFIG_SCSI_QLA_ISCSI is not set
# CONFIG_SCSI_LPFC is not set
# CONFIG_SCSI_DC395x is not set
# CONFIG_SCSI_AM53C974 is not set
# CONFIG_SCSI_WD719X is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_PMCRAID is not set
# CONFIG_SCSI_PM8001 is not set
# CONFIG_SCSI_BFA_FC is not set
# CONFIG_SCSI_CHELSIO_FCOE is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
CONFIG_ATA_NONSTANDARD=y
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
CONFIG_SATA_PMP=y

#
# Controllers with non-SFF native interface
#
# CONFIG_SATA_AHCI is not set
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y

#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y

#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
CONFIG_SATA_VITESSE=y

#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set

#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set

#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_MD_MULTIPATH=m
# CONFIG_MD_FAULTY is not set
# CONFIG_BCACHE is not set
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_DM=m
# CONFIG_DM_DEBUG is not set
CONFIG_DM_BUFIO=m
CONFIG_DM_CRYPT=m
CONFIG_DM_SNAPSHOT=m
# CONFIG_DM_THIN_PROVISIONING is not set
# CONFIG_DM_CACHE is not set
# CONFIG_DM_ERA is not set
CONFIG_DM_MIRROR=m
# CONFIG_DM_LOG_USERSPACE is not set
# CONFIG_DM_RAID is not set
CONFIG_DM_ZERO=m
CONFIG_DM_MULTIPATH=m
# CONFIG_DM_MULTIPATH_QL is not set
# CONFIG_DM_MULTIPATH_ST is not set
# CONFIG_DM_DELAY is not set
# CONFIG_DM_UEVENT is not set
# CONFIG_DM_FLAKEY is not set
# CONFIG_DM_VERITY is not set
# CONFIG_DM_SWITCH is not set
# CONFIG_TARGET_CORE is not set
CONFIG_FUSION=y
CONFIG_FUSION_SPI=y
CONFIG_FUSION_FC=m
CONFIG_FUSION_SAS=y
CONFIG_FUSION_MAX_SGE=128
# CONFIG_FUSION_CTL is not set
# CONFIG_FUSION_LOGGING is not set

#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
CONFIG_MII=m
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
CONFIG_NET_POLL_CONTROLLER=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_NLMON is not set
# CONFIG_ARCNET is not set

#
# CAIF transport drivers
#

#
# Distributed Switch Architecture drivers
#
# CONFIG_NET_DSA_MV88E6XXX is not set
# CONFIG_NET_DSA_MV88E6060 is not set
# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
# CONFIG_NET_DSA_MV88E6131 is not set
# CONFIG_NET_DSA_MV88E6123_61_65 is not set
# CONFIG_NET_DSA_MV88E6171 is not set
# CONFIG_NET_DSA_MV88E6352 is not set
# CONFIG_NET_DSA_BCM_SF2 is not set
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_AGERE=y
# CONFIG_ET131X is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
# CONFIG_ALTERA_TSE is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
# CONFIG_NET_XGENE is not set
CONFIG_NET_VENDOR_ARC=y
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
# CONFIG_ALX is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BCMGENET is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
CONFIG_TIGON3=y
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
# CONFIG_TULIP_NAPI is not set
# CONFIG_DE4X5 is not set
# CONFIG_WINBOND_840 is not set
# CONFIG_DM9102 is not set
# CONFIG_ULI526X is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
CONFIG_E100=m
CONFIG_E1000=y
# CONFIG_E1000E is not set
CONFIG_IGB=y
CONFIG_IGB_HWMON=y
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_I40E is not set
# CONFIG_I40EVF is not set
# CONFIG_FM10K is not set
CONFIG_NET_VENDOR_I825XX=y
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_MVMDIO is not set
# CONFIG_SKGE is not set
# CONFIG_SKY2 is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
# CONFIG_MLX5_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_ETHOC is not set
CONFIG_NET_PACKET_ENGINE=y
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_QUALCOMM=y
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_ROCKER=y
CONFIG_NET_VENDOR_SAMSUNG=y
# CONFIG_SXGBE_ETH is not set
CONFIG_NET_VENDOR_SEEQ=y
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC911X is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
CONFIG_PHYLIB=y

#
# MII PHY device drivers
#
# CONFIG_AT803X_PHY is not set
# CONFIG_AMD_PHY is not set
# CONFIG_MARVELL_PHY is not set
# CONFIG_DAVICOM_PHY is not set
# CONFIG_QSEMI_PHY is not set
# CONFIG_LXT_PHY is not set
# CONFIG_CICADA_PHY is not set
# CONFIG_VITESSE_PHY is not set
# CONFIG_SMSC_PHY is not set
# CONFIG_BROADCOM_PHY is not set
# CONFIG_BCM7XXX_PHY is not set
# CONFIG_BCM87XX_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
# CONFIG_NATIONAL_PHY is not set
# CONFIG_STE10XP is not set
# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_MICREL_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
# CONFIG_MDIO_BCM_UNIMAC is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set

#
# Host-side USB support is needed for USB Network Adapter support
#
CONFIG_USB_NET_DRIVERS=m
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_RTL8152 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_PRISM54 is not set
# CONFIG_HOSTAP is not set
# CONFIG_WL_TI is not set

#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set

#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set

#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set

#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_CYPRESS=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_CYAPA is not set
# CONFIG_MOUSE_ELAN_I2C is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set

#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_SERIO_ARC_PS2 is not set
CONFIG_GAMEPORT=m
# CONFIG_GAMEPORT_NS558 is not set
# CONFIG_GAMEPORT_L4 is not set
# CONFIG_GAMEPORT_EMU10K1 is not set
# CONFIG_GAMEPORT_FM801 is not set

#
# Character devices
#
CONFIG_TTY=y
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_VT_HW_CONSOLE_BINDING=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
CONFIG_SERIAL_NONSTANDARD=y
# CONFIG_ROCKETPORT is not set
# CONFIG_CYCLADES is not set
# CONFIG_MOXA_INTELLIO is not set
# CONFIG_MOXA_SMARTIO is not set
# CONFIG_SYNCLINKMP is not set
# CONFIG_SYNCLINK_GT is not set
# CONFIG_NOZOMI is not set
# CONFIG_ISI is not set
# CONFIG_N_HDLC is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
CONFIG_SGI_SNSC=y
CONFIG_SGI_TIOCX=y
CONFIG_SGI_MBCS=m

#
# Serial drivers
#
CONFIG_SERIAL_EARLYCON=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=6
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
# CONFIG_SERIAL_8250_RSA is not set
# CONFIG_SERIAL_8250_DW is not set
# CONFIG_SERIAL_8250_FINTEK is not set

#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_SERIAL_SGI_L1_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_SERIAL_SGI_IOC4=y
# CONFIG_SERIAL_SGI_IOC3 is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_SC16IS7XX is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_ARC is not set
# CONFIG_SERIAL_RP2 is not set
# CONFIG_SERIAL_FSL_LPUART is not set
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
CONFIG_EFI_RTC=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
CONFIG_RAW_DRIVER=m
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
CONFIG_HPET_MMAP_DEFAULT=y
# CONFIG_HANGCHECK_TIMER is not set
CONFIG_MMTIMER=y
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_XILLYBUS is not set

#
# I2C support
#
CONFIG_I2C=y
CONFIG_ACPI_I2C_OPREGION=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=y

#
# I2C Hardware Bus support
#

#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set

#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set

#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set

#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_ROBOTFUZZ_OSIF is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set

#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_SLAVE is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_SPMI is not set
# CONFIG_HSI is not set

#
# PPS support
#
CONFIG_PPS=y
# CONFIG_PPS_DEBUG is not set
# CONFIG_NTP_PPS is not set

#
# PPS clients support
#
# CONFIG_PPS_CLIENT_KTIMER is not set
# CONFIG_PPS_CLIENT_LDISC is not set
# CONFIG_PPS_CLIENT_GPIO is not set

#
# PPS generators support
#

#
# PTP clock support
#
CONFIG_PTP_1588_CLOCK=y

#
# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_BQ2415X is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_RESET is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set

#
# Native drivers
#
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_G762 is not set
# CONFIG_SENSORS_HIH6130 is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_POWR1220 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LTC2945 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4222 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4260 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MAX6697 is not set
# CONFIG_SENSORS_HTU21 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LM95234 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_NCT6683 is not set
# CONFIG_SENSORS_NCT6775 is not set
# CONFIG_SENSORS_NCT7802 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SHTC1 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_ADC128D818 is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA209 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP103 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set

#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
CONFIG_THERMAL=m
CONFIG_THERMAL_HWMON=y
CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set
# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set
# CONFIG_THERMAL_GOV_FAIR_SHARE is not set
CONFIG_THERMAL_GOV_STEP_WISE=y
# CONFIG_THERMAL_GOV_BANG_BANG is not set
# CONFIG_THERMAL_GOV_USER_SPACE is not set
# CONFIG_THERMAL_EMULATION is not set

#
# Texas Instruments thermal drivers
#
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y

#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y

#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set

#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_AS3711 is not set
# CONFIG_PMIC_ADP5520 is not set
# CONFIG_MFD_BCM590XX is not set
# CONFIG_MFD_AXP20X is not set
# CONFIG_MFD_CROS_EC is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_DA9052_I2C is not set
# CONFIG_MFD_DA9055 is not set
# CONFIG_MFD_DA9063 is not set
# CONFIG_MFD_DLN2 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_LPC_ICH is not set
# CONFIG_LPC_SCH is not set
# CONFIG_INTEL_SOC_PMIC is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_KEMPLD is not set
# CONFIG_MFD_88PM800 is not set
# CONFIG_MFD_88PM805 is not set
# CONFIG_MFD_88PM860X is not set
# CONFIG_MFD_MAX14577 is not set
# CONFIG_MFD_MAX77686 is not set
# CONFIG_MFD_MAX77693 is not set
# CONFIG_MFD_MAX8907 is not set
# CONFIG_MFD_MAX8925 is not set
# CONFIG_MFD_MAX8997 is not set
# CONFIG_MFD_MAX8998 is not set
# CONFIG_MFD_MENF21BMC is not set
# CONFIG_MFD_VIPERBOARD is not set
# CONFIG_MFD_RETU is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_RTSX_PCI is not set
# CONFIG_MFD_RTSX_USB is not set
# CONFIG_MFD_RC5T583 is not set
# CONFIG_MFD_RN5T618 is not set
# CONFIG_MFD_SEC_CORE is not set
# CONFIG_MFD_SI476X_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_MFD_SMSC is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_SYSCON is not set
# CONFIG_MFD_TI_AM335X_TSCADC is not set
# CONFIG_MFD_LP3943 is not set
# CONFIG_MFD_LP8788 is not set
# CONFIG_MFD_PALMAS is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65090 is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TPS65218 is not set
# CONFIG_MFD_TPS6586X is not set
# CONFIG_MFD_TPS80031 is not set
# CONFIG_TWL4030_CORE is not set
# CONFIG_TWL6040_CORE is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_MFD_TC3589X is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM831X_I2C is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_WM8994 is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set

#
# Graphics support
#
CONFIG_AGP=m
CONFIG_AGP_I460=m
CONFIG_AGP_HP_ZX1=m
CONFIG_AGP_SGI_TIOCA=m
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16

#
# Direct Rendering Manager
#
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
CONFIG_DRM_KMS_FB_HELPER=y
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
CONFIG_DRM_TTM=m

#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_ADV7511 is not set
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
# CONFIG_DRM_I2C_NXP_TDA998X is not set
# CONFIG_DRM_PTN3460 is not set
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
# CONFIG_DRM_RADEON_UMS is not set
# CONFIG_DRM_NOUVEAU is not set
CONFIG_DRM_MGA=m
CONFIG_DRM_SIS=m
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_DRM_QXL is not set
# CONFIG_DRM_BOCHS is not set

#
# Frame buffer Devices
#
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
CONFIG_FB_CMDLINE=y
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set

#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_OPENCORES is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
# CONFIG_VGASTATE is not set
CONFIG_HDMI=y

#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
# CONFIG_VGACON_SOFT_SCROLLBACK is not set
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_LOGO is not set
CONFIG_SOUND=m
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_HWDEP=m
CONFIG_SND_RAWMIDI=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
CONFIG_SND_VERBOSE_PRINTK=y
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_RAWMIDI_SEQ=m
CONFIG_SND_OPL3_LIB_SEQ=m
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
CONFIG_SND_EMU10K1_SEQ=m
CONFIG_SND_MPU401_UART=m
CONFIG_SND_OPL3_LIB=m
CONFIG_SND_AC97_CODEC=m
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_ALOOP is not set
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
# CONFIG_SND_AC97_POWER_SAVE is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
CONFIG_SND_CS4281=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
CONFIG_SND_EMU10K1=m
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
CONFIG_SND_FM801=m
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set

#
# HD-Audio
#
# CONFIG_SND_HDA_INTEL is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
# CONFIG_SND_USB_6FIRE is not set
# CONFIG_SND_USB_HIFACE is not set
# CONFIG_SND_BCD2000 is not set
# CONFIG_SND_SOC is not set
# CONFIG_SOUND_PRIME is not set
CONFIG_AC97_BUS=m

#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
# CONFIG_HIDRAW is not set
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y

#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_APPLEIR is not set
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
# CONFIG_HID_DRAGONRISE is not set
# CONFIG_HID_EMS_FF is not set
# CONFIG_HID_ELECOM is not set
# CONFIG_HID_ELO is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_HUION is not set
# CONFIG_HID_KEYTOUCH is not set
# CONFIG_HID_KYE is not set
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=m
# CONFIG_HID_ICADE is not set
# CONFIG_HID_TWINHAN is not set
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO is not set
CONFIG_HID_LOGITECH=y
# CONFIG_HID_LOGITECH_HIDPP is not set
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
# CONFIG_HID_MAGICMOUSE is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
# CONFIG_HID_NTRIG is not set
# CONFIG_HID_ORTEK is not set
CONFIG_HID_PANTHERLORD=m
# CONFIG_PANTHERLORD_FF is not set
# CONFIG_HID_PENMOUNT is not set
CONFIG_HID_PETALYNX=m
# CONFIG_HID_PICOLCD is not set
CONFIG_HID_PLANTRONICS=y
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=m
# CONFIG_HID_SPEEDLINK is not set
# CONFIG_HID_STEELSERIES is not set
CONFIG_HID_SUNPLUS=m
# CONFIG_HID_RMI is not set
# CONFIG_HID_GREENASIA is not set
# CONFIG_HID_SMARTJOYPLUS is not set
# CONFIG_HID_TIVO is not set
# CONFIG_HID_TOPSEED is not set
# CONFIG_HID_THRUSTMASTER is not set
# CONFIG_HID_WACOM is not set
# CONFIG_HID_XINMO is not set
# CONFIG_HID_ZEROPLUS is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set

#
# USB HID support
#
CONFIG_USB_HID=m
# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set

#
# I2C HID support
#
# CONFIG_I2C_HID is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=m
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=m
# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set

#
# Miscellaneous USB options
#
CONFIG_USB_DEFAULT_PERSIST=y
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_FSM is not set
CONFIG_USB_MON=m
# CONFIG_USB_WUSB_CBAF is not set

#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=m
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
CONFIG_USB_EHCI_TT_NEWSCHED=y
CONFIG_USB_EHCI_PCI=m
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
# CONFIG_USB_FUSBH200_HCD is not set
# CONFIG_USB_FOTG210_HCD is not set
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_OHCI_HCD_PCI=m
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
CONFIG_USB_UHCI_HCD=m
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_HCD_TEST_MODE is not set

#
# USB Device Class drivers
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set

#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#

#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set

#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
# CONFIG_USBIP_CORE is not set
# CONFIG_USB_MUSB_HDRC is not set
# CONFIG_USB_DWC3 is not set
# CONFIG_USB_DWC2 is not set
# CONFIG_USB_CHIPIDEA is not set

#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set

#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_EHSET_TEST_FIXTURE is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
# CONFIG_USB_HSIC_USB3503 is not set
# CONFIG_USB_LINK_LAYER_TEST is not set

#
# USB Physical Layer drivers
#
# CONFIG_USB_PHY is not set
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
CONFIG_INFINIBAND=m
# CONFIG_INFINIBAND_USER_MAD is not set
# CONFIG_INFINIBAND_USER_ACCESS is not set
CONFIG_INFINIBAND_ADDR_TRANS=y
CONFIG_INFINIBAND_MTHCA=m
CONFIG_INFINIBAND_MTHCA_DEBUG=y
# CONFIG_INFINIBAND_QIB is not set
# CONFIG_INFINIBAND_AMSO1100 is not set
# CONFIG_MLX4_INFINIBAND is not set
# CONFIG_MLX5_INFINIBAND is not set
# CONFIG_INFINIBAND_NES is not set
# CONFIG_INFINIBAND_OCRDMA is not set
# CONFIG_INFINIBAND_USNIC is not set
CONFIG_INFINIBAND_IPOIB=m
# CONFIG_INFINIBAND_IPOIB_CM is not set
CONFIG_INFINIBAND_IPOIB_DEBUG=y
# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set
# CONFIG_INFINIBAND_SRP is not set
# CONFIG_INFINIBAND_ISER is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_VFIO is not set
# CONFIG_VIRT_DRIVERS is not set

#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set

#
# Microsoft Hyper-V guest support
#
# CONFIG_STAGING is not set

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_SOC_TI is not set

#
# Hardware Spinlock drivers
#

#
# Clock Source drivers
#
# CONFIG_ATMEL_PIT is not set
# CONFIG_MAILBOX is not set
CONFIG_IOMMU_API=y
CONFIG_IOMMU_SUPPORT=y
CONFIG_DMAR_TABLE=y
CONFIG_INTEL_IOMMU=y
CONFIG_INTEL_IOMMU_DEFAULT_ON=y

#
# Remoteproc drivers
#
# CONFIG_STE_MODEM_RPROC is not set

#
# Rpmsg drivers
#

#
# SOC (System On Chip) specific Drivers
#
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
# CONFIG_IPACK_BUS is not set
# CONFIG_RESET_CONTROLLER is not set
# CONFIG_FMC is not set

#
# PHY Subsystem
#
# CONFIG_GENERIC_PHY is not set
# CONFIG_BCM_KONA_USB2_PHY is not set
# CONFIG_POWERCAP is not set
# CONFIG_MCB is not set
# CONFIG_THUNDERBOLT is not set

#
# Android
#
# CONFIG_ANDROID is not set

#
# HP Simulator drivers
#
# CONFIG_HP_SIMETH is not set
# CONFIG_HP_SIMSERIAL is not set
# CONFIG_HP_SIMSCSI is not set
CONFIG_MSPEC=m

#
# File systems
#
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT2_FS_SECURITY=y
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
CONFIG_EXT3_DEFAULTS_TO_ORDERED=y
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
CONFIG_REISERFS_FS=y
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_REISERFS_FS_XATTR=y
CONFIG_REISERFS_FS_POSIX_ACL=y
CONFIG_REISERFS_FS_SECURITY=y
# CONFIG_JFS_FS is not set
CONFIG_XFS_FS=y
# CONFIG_XFS_QUOTA is not set
# CONFIG_XFS_POSIX_ACL is not set
# CONFIG_XFS_RT is not set
# CONFIG_XFS_WARN is not set
# CONFIG_XFS_DEBUG is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_EXPORTFS=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
# CONFIG_OVERLAY_FS is not set

#
# Caches
#
# CONFIG_FSCACHE is not set

#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=m
CONFIG_UDF_NLS=y

#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
# CONFIG_MSDOS_FS is not set
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set

#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_VMCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_KERNFS=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_TMPFS_XATTR is not set
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_F2FS_FS is not set
# CONFIG_EFIVAR_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=m
CONFIG_NFS_V2=m
CONFIG_NFS_V3=m
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=m
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
# CONFIG_NFSD_V3_ACL is not set
CONFIG_NFSD_V4=y
# CONFIG_NFSD_FAULT_INJECTION is not set
CONFIG_GRACE_PERIOD=m
CONFIG_LOCKD=m
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=m
CONFIG_SUNRPC_GSS=m
# CONFIG_SUNRPC_DEBUG is not set
CONFIG_SUNRPC_XPRT_RDMA_CLIENT=m
CONFIG_SUNRPC_XPRT_RDMA_SERVER=m
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
CONFIG_CIFS_DEBUG=y
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
# CONFIG_NLS_ASCII is not set
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=m

#
# Kernel hacking
#

#
# printk and dmesg options
#
# CONFIG_PRINTK_TIME is not set
CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4
# CONFIG_BOOT_PRINTK_DELAY is not set

#
# Compile-time checks and compiler options
#
# CONFIG_DEBUG_INFO is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=2048
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_PAGE_OWNER is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
CONFIG_MAGIC_SYSRQ=y
CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1
CONFIG_DEBUG_KERNEL=y

#
# Memory Debugging
#
# CONFIG_PAGE_EXTENSION is not set
# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_DEBUG_SHIRQ is not set

#
# Debug Lockups and Hangs
#
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_PANIC_TIMEOUT=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_SCHED_STACK_END_CHECK is not set
# CONFIG_TIMER_STATS is not set

#
# Lock Debugging (spinlocks, mutexes, etc...)
#
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK is not set
CONFIG_DEBUG_MUTEXES=y
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_LOCK_TORTURE_TEST is not set
# CONFIG_STACKTRACE is not set
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_PI_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set

#
# RCU Debugging
#
# CONFIG_SPARSE_RCU_POINTER is not set
# CONFIG_TORTURE_TEST is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=21
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y

#
# Runtime Testing
#
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PERCPU_TEST is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_TEST_STRING_HELPERS is not set
# CONFIG_TEST_KSTRTOX is not set
# CONFIG_TEST_RHASHTABLE is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_TEST_LKM is not set
# CONFIG_TEST_USER_COPY is not set
# CONFIG_TEST_BPF is not set
# CONFIG_TEST_FIRMWARE is not set
# CONFIG_TEST_UDELAY is not set
# CONFIG_SAMPLES is not set
CONFIG_IA64_GRANULE_16MB=y
# CONFIG_IA64_PRINT_HAZARDS is not set
# CONFIG_DISABLE_VHPT is not set
# CONFIG_IA64_DEBUG_CMPXCHG is not set
# CONFIG_IA64_DEBUG_IRQ is not set

#
# Security options
#
CONFIG_KEYS=y
# CONFIG_PERSISTENT_KEYRINGS is not set
# CONFIG_BIG_KEYS is not set
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y

#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=m
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=m
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_MCRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set

#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set

#
# Block modes
#
CONFIG_CRYPTO_CBC=m
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
CONFIG_CRYPTO_ECB=m
# CONFIG_CRYPTO_LRW is not set
CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_XTS is not set

#
# Hash modes
#
CONFIG_CRYPTO_CMAC=m
CONFIG_CRYPTO_HMAC=m
# CONFIG_CRYPTO_XCBC is not set
# CONFIG_CRYPTO_VMAC is not set

#
# Digest
#
CONFIG_CRYPTO_CRC32C=y
# CONFIG_CRYPTO_CRC32 is not set
CONFIG_CRYPTO_CRCT10DIF=y
# CONFIG_CRYPTO_GHASH is not set
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
CONFIG_CRYPTO_SHA256=m
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set

#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=m
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
CONFIG_CRYPTO_DES=m
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set

#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
# CONFIG_CRYPTO_LZ4 is not set
# CONFIG_CRYPTO_LZ4HC is not set

#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_DRBG_MENU is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
CONFIG_CRYPTO_HW=y
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
# CONFIG_BINARY_PRINTF is not set

#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_NET_UTILS=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=y
# CONFIG_CRC8 is not set
# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set
# CONFIG_RANDOM32_SELFTEST is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_LZ4_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_DECOMPRESS_LZ4=y
CONFIG_GENERIC_ALLOCATOR=y
CONFIG_INTERVAL_TREE=y
CONFIG_ASSOCIATIVE_ARRAY=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT_MAP=y
CONFIG_HAS_DMA=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_GLOB=y
# CONFIG_GLOB_SELFTEST is not set
CONFIG_NLATTR=y
# CONFIG_AVERAGE is not set
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
CONFIG_OID_REGISTRY=m
CONFIG_UCS2_STRING=y
CONFIG_FONT_SUPPORT=m
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
CONFIG_ARCH_HAS_SG_CHAIN=y
CONFIG_IOMMU_HELPER=y

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-26 21:24     ` Tony Luck
@ 2015-01-26 23:53       ` Bjorn Helgaas
  2015-01-27  3:55         ` Yinghai Lu
  2015-01-27  3:43       ` Yinghai Lu
  1 sibling, 1 reply; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-26 23:53 UTC (permalink / raw)
  To: Tony Luck
  Cc: Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Yinghai Lu, Marek Kordik,
	Alex Williamson, Andreas Hartmann, Alexey Voronkov, David Airlie,
	Alex Deucher

On Mon, Jan 26, 2015 at 01:24:51PM -0800, Tony Luck wrote:
> On Mon, Jan 26, 2015 at 1:02 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> > Sorry for the inconvenience.  Can you collect a complete dmesg log and
> > "lspci -vv" output, too (from the kernel with the reverted commit)?
> > That will have more useful information than just /proc/iomem.
> 
> Full dmesg, lspci -vv, and bonus .config (CONFIG_PCI_IOV is indeed
> not set)

The ROM part is something we should fix:

  pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window

The ROM BAR is probably disabled, and we shouldn't complain about this if
it's disabled.  Yinghai?

The stuff on bus 0000:80 looks like at least partly a firmware problem:

  ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
  acpi PNP0A08:01: host bridge window [io  0x9000-0xfffe]
  pci 0000:80:01.0: PCI bridge to [bus 81]
  pci 0000:80:01.0:   bridge window [io  0xa000-0xafff]
  pci 0000:80:01.0:   bridge window [mem 0xa0100000-0xa01fffff]
  pci 0000:80:13.0: reg 0x10: [mem 0xa0220000-0xa0220fff]

ACPI told us about an I/O port aperture, but didn't mention any MMIO
apertures through the host bridge.  Therefore, we have no MMIO space to
assign to the devices on [bus 80-ff].

But presumably these devices, e.g., the igb devices at 81:00.0 and 81:00.1
and the mpt device at 83:00.0, actually DO work, so the PCI1 host bridge
must actually forward some MMIO space that ACPI didn't tell us about.  I
think on x86, we would fall back to whatever the firmware left in those
BARs.  We should probably do the same on x86.

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-26 21:24     ` Tony Luck
  2015-01-26 23:53       ` Bjorn Helgaas
@ 2015-01-27  3:43       ` Yinghai Lu
  2015-01-27 23:24         ` Tony Luck
  1 sibling, 1 reply; 17+ messages in thread
From: Yinghai Lu @ 2015-01-27  3:43 UTC (permalink / raw)
  To: Tony Luck
  Cc: Bjorn Helgaas, Linus Torvalds, linux-pci,
	Linux Kernel Mailing List, Lucas Stach, Richard Zhu,
	Marek Kordik, Alex Williamson, Andreas Hartmann, Alexey Voronkov,
	David Airlie, Alex Deucher

On Mon, Jan 26, 2015 at 1:24 PM, Tony Luck <tony.luck@gmail.com> wrote:
> On Mon, Jan 26, 2015 at 1:02 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
>> Sorry for the inconvenience.  Can you collect a complete dmesg log and
>> "lspci -vv" output, too (from the kernel with the reverted commit)?
>> That will have more useful information than just /proc/iomem.
>
> Full dmesg, lspci -vv, and bonus .config (CONFIG_PCI_IOV is indeed
> not set)

Sorry for the problem.

Can you please get boot bog with "debug ignore_logleve"?

we should get print out from

+               dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
+                                &orig_res, res);


Thanks

Yinghai

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-26 23:53       ` Bjorn Helgaas
@ 2015-01-27  3:55         ` Yinghai Lu
  2015-01-27 14:03           ` Bjorn Helgaas
  0 siblings, 1 reply; 17+ messages in thread
From: Yinghai Lu @ 2015-01-27  3:55 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Tony Luck, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Mon, Jan 26, 2015 at 3:53 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Mon, Jan 26, 2015 at 01:24:51PM -0800, Tony Luck wrote:
>> On Mon, Jan 26, 2015 at 1:02 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
>> > Sorry for the inconvenience.  Can you collect a complete dmesg log and
>> > "lspci -vv" output, too (from the kernel with the reverted commit)?
>> > That will have more useful information than just /proc/iomem.
>>
>> Full dmesg, lspci -vv, and bonus .config (CONFIG_PCI_IOV is indeed
>> not set)
>
> The ROM part is something we should fix:
>
>   pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>
> The ROM BAR is probably disabled, and we shouldn't complain about this if
> it's disabled.  Yinghai?

original ia64 code, has extra checking to hide the warning

-static int is_valid_resource(struct pci_dev *dev, int idx)
 {
-       unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
-       struct resource *devr = &dev->resource[idx], *busr;

        if (!dev->bus)
-               return 0;
-
-       pci_bus_for_each_resource(dev->bus, busr, i) {
-               if (!busr || ((busr->flags ^ devr->flags) & type_mask))
-                       continue;
-               if ((devr->start) && (devr->start >= busr->start) &&
-                               (devr->end <= busr->end))
-                       return 1;
-       }
-       return 0;
-}

also that is used to skip pci_claim_resource calling for invalid ...

so the root resource is totally wrong from ACPI.

Thanks

Yinghai

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-27  3:55         ` Yinghai Lu
@ 2015-01-27 14:03           ` Bjorn Helgaas
  2015-01-27 23:27             ` Tony Luck
  0 siblings, 1 reply; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-27 14:03 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Tony Luck, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Mon, Jan 26, 2015 at 9:55 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Mon, Jan 26, 2015 at 3:53 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
>> On Mon, Jan 26, 2015 at 01:24:51PM -0800, Tony Luck wrote:
>>> On Mon, Jan 26, 2015 at 1:02 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
>>> > Sorry for the inconvenience.  Can you collect a complete dmesg log and
>>> > "lspci -vv" output, too (from the kernel with the reverted commit)?
>>> > That will have more useful information than just /proc/iomem.
>>>
>>> Full dmesg, lspci -vv, and bonus .config (CONFIG_PCI_IOV is indeed
>>> not set)
>>
>> The ROM part is something we should fix:
>>
>>   pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
>>
>> The ROM BAR is probably disabled, and we shouldn't complain about this if
>> it's disabled.  Yinghai?
>
> original ia64 code, has extra checking to hide the warning
>
> -static int is_valid_resource(struct pci_dev *dev, int idx)
>  {
> -       unsigned int i, type_mask = IORESOURCE_IO | IORESOURCE_MEM;
> -       struct resource *devr = &dev->resource[idx], *busr;
>
>         if (!dev->bus)
> -               return 0;
> -
> -       pci_bus_for_each_resource(dev->bus, busr, i) {
> -               if (!busr || ((busr->flags ^ devr->flags) & type_mask))
> -                       continue;
> -               if ((devr->start) && (devr->start >= busr->start) &&
> -                               (devr->end <= busr->end))
> -                       return 1;
> -       }
> -       return 0;
> -}
>
> also that is used to skip pci_claim_resource calling for invalid ...
>
> so the root resource is totally wrong from ACPI.

Yes, ACPI is clearly missing some information.

Just to make sure we're planning the same thing, I expect that we will
fix or workaround both issues so it works just as well as v3.18 by the
time v3.19 is released.  This is a system in the field, and we should
be able to figure out how to deal with the broken firmware.  Asking
users to upgrade their firmware is not the solution I'm looking for.

There is nothing ia64-specific about this issue, so we should be able
to do this in some generic way.

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-27  3:43       ` Yinghai Lu
@ 2015-01-27 23:24         ` Tony Luck
  2015-01-28  0:54           ` Yinghai Lu
  0 siblings, 1 reply; 17+ messages in thread
From: Tony Luck @ 2015-01-27 23:24 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Bjorn Helgaas, Linus Torvalds, linux-pci,
	Linux Kernel Mailing List, Lucas Stach, Richard Zhu,
	Marek Kordik, Alex Williamson, Andreas Hartmann, Alexey Voronkov,
	David Airlie, Alex Deucher

[-- Attachment #1: Type: text/plain, Size: 354 bytes --]

On Mon, Jan 26, 2015 at 7:43 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> Can you please get boot bog with "debug ignore_logleve"?
>
> we should get print out from
>
> +               dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
> +                                &orig_res, res);

Attached ... but I don't see any "clipped" messages

-Tony

[-- Attachment #2: dmesg1 --]
[-- Type: application/octet-stream, Size: 39987 bytes --]

Initializing cgroup subsys cpuset
Linux version 3.19.0-rc6-generic-smp-21-g4adca1cbc4ce (aegl@linux-bxb1) (gcc version 4.3.4 [gcc-4_3-branch revision 152973] (SUSE Linux) ) #1 SMP Tue Jan 27 10:13:18 PST 2015
EFI v2.10 by EDK II:
efi:  SALsystab=0x3e81e418  ACPI 2.0=0x3da42014  SMBIOS=0x3a249000 
booting generic kernel on platform dig
debug: ignoring loglevel setting.
Early serial console at I/O port 0x3f8 (options '')
bootconsole [uart0] enabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000003DA42014 000024 (v02 INTEL )
ACPI: XSDT 0x000000003DA42120 00004C (v01 INTEL  BXBIOH   00000002      01000013)
ACPI: FACP 0x000000003A26C000 0000F4 (v04 INTEL  BXBIOH   00000002      00000000)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/PmTimerBlock: 32/24 (20141107/tbfadt-618)
ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20141107/tbfadt-618)
ACPI BIOS Warning (bug): Invalid length for FADT/PmTimerBlock: 24, using default 32 (20141107/tbfadt-699)
ACPI: DSDT 0x000000003A24A000 019928 (v01 INTEL  BXBIOH   00000002 INTL 20080926)
ACPI: FACS 0x000000003A4EA000 000040
ACPI: APIC 0x000000003A26A000 0002D0 (v01 INTEL  BXBIOH   00000002      00000000)
ACPI: SLIT 0x000000003A268000 00003C (v01 INTEL  BXBIOH   00000002      00000000)
ACPI: SPCR 0x000000003A266000 000050 (v01 INTEL  BXBIOH   00000002      00000000)
ACPI: SRAT 0x000000003A264000 000550 (v01 INTEL  BXBIOH   00000002      00000000)
ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
32 CPUs available, 32 CPUs total
Number of logical nodes in system = 1
Number of memory chunks in system = 3
SMP: Allowing 32 CPUs, 0 hotplug CPUs
Initial ramdisk at: 0xe0000004faad6000 (5045665 bytes)
SAL 3.20:  version 0.0
SAL: AP wakeup using external interrupt vector 0xf0
MCA related initialization done
Virtual mem_map starts at 0xa07ffffffee80000
Zone ranges:
  DMA      [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x4fbffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x01000000-0x3a23ffff]
  node   0: [mem 0x3a270000-0x3a4dffff]
  node   0: [mem 0x3a540000-0x3a59ffff]
  node   0: [mem 0x3a6c0000-0x3a6dffff]
  node   0: [mem 0x3a780000-0x3ac3ffff]
  node   0: [mem 0x3acb0000-0x3ad4ffff]
  node   0: [mem 0x3ad70000-0x3ad8ffff]
  node   0: [mem 0x3adb0000-0x3adcffff]
  node   0: [mem 0x3ae40000-0x3ae4ffff]
  node   0: [mem 0x3ae60000-0x3ae7ffff]
  node   0: [mem 0x3b280000-0x3b2dffff]
  node   0: [mem 0x3b2f0000-0x3b39ffff]
  node   0: [mem 0x3b3c0000-0x3b92ffff]
  node   0: [mem 0x3b960000-0x3b97ffff]
  node   0: [mem 0x3c0f0000-0x3c15ffff]
  node   0: [mem 0x3c180000-0x3c20ffff]
  node   0: [mem 0x3c230000-0x3c7dffff]
  node   0: [mem 0x3c7f0000-0x3c88ffff]
  node   0: [mem 0x3c8b0000-0x3c8bffff]
  node   0: [mem 0x3c8e0000-0x3ca4ffff]
  node   0: [mem 0x3ca60000-0x3caaffff]
  node   0: [mem 0x3cac0000-0x3cc7ffff]
  node   0: [mem 0x3cc90000-0x3cdcffff]
  node   0: [mem 0x3cde0000-0x3ce2ffff]
  node   0: [mem 0x3ce40000-0x3d9effff]
  node   0: [mem 0x3da00000-0x3da3ffff]
  node   0: [mem 0x3da50000-0x3e7fffff]
  node   0: [mem 0x3e820000-0x3f8cffff]
  node   0: [mem 0x3fdd0000-0x3fdeffff]
  node   0: [mem 0x100000000-0x3ffffffff]
  node   0: [mem 0x440000000-0x4faf9ffff]
  node   0: [mem 0x4fb010000-0x4fb0dffff]
  node   0: [mem 0x4fb0f0000-0x4fbffffff]
Initmem setup node 0 [mem 0x01000000-0x4fbffffff]
On node 0 totalpages: 260480
free_area_init_node: node 0, pgdat e000000001900000, node_mem_map a07ffffffee83800
  DMA zone: 56 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 15752 pages, LIFO batch:1
  Normal zone: 224 pages used for memmap
  Normal zone: 244728 pages, LIFO batch:1
pcpu-alloc: s28288 r8192 d225664 u262144 alloc=4*65536
pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07 
pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15 
pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22 [0] 23 
pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30 [0] 31 
Built 1 zonelists in Node order, mobility grouping on.  Total pages: 260200
Policy zone: Normal
Kernel command line: BOOT_IMAGE=scsi0:\efi\SuSE\l-generic-smp.gz  debug ignore_loglevel console=tty1 console=uart,io,0x3f8 intel_iommu=off root=/dev/sda3
Intel-IOMMU: disabled
PID hash table entries: 4096 (order: -1, 32768 bytes)
Sorting __ex_table...
software IO TLB [mem 0x05e70000-0x09e70000] (64MB) mapped at [e000000005e70000-e000000009e6ffff]
Memory: 16544256K/16670720K available (12513K kernel code, 5851K rwdata, 1916K rodata, 1088K init, 8144K bss, 126464K reserved, 0K cma-reserved)
SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=32, Nodes=1024
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=4096 to nr_cpu_ids=32.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
NR_IRQS:1024
ia64_native_iosapic_pcat_compat_init: Disabling PC-AT compatible 8259 interrupts
ACPI: Local APIC address c0000000fee00000
PLATFORM int CPEI (0x3): GSI 22 (level, low) -> CPU 0 (0x0000) vector 30
PLATFORM int PMI (0x1): GSI 23 (edge, low) -> CPU 0 (0x0000) vector 0
register_intr: changing vector 39 from IO-SAPIC-edge to IO-SAPIC-level
CPU 0: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
Console: colour VGA+ 80x25
console [tty1] enabled
Calibrating delay loop... 3641.34 BogoMIPS (lpj=7282688)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20141107
ACPI: All ACPI Tables successfully acquired
Dentry cache hash table entries: 2097152 (order: 8, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 7, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 2, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 2, 262144 bytes)
Boot processor id 0x0/0x0
Fixed BSP b0 value from CPU 1
CPU 1: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 61 cycles)
CPU 1: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 2: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 667 cycles)
CPU 2: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 3: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 662 cycles)
CPU 3: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 4: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 667 cycles)
CPU 4: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 5: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 664 cycles)
CPU 5: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 6: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 666 cycles)
CPU 6: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 7: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 662 cycles)
CPU 7: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 8: synchronized ITC with CPU 0 (last diff -2 cycles, maxerr 754 cycles)
CPU 8: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 9: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 748 cycles)
CPU 9: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 10: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 754 cycles)
CPU 10: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 11: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 747 cycles)
CPU 11: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 12: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 754 cycles)
CPU 12: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 13: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 748 cycles)
CPU 13: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 14: synchronized ITC with CPU 0 (last diff 2 cycles, maxerr 754 cycles)
CPU 14: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 15: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 748 cycles)
CPU 15: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 16: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 704 cycles)
CPU 16: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 17: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 701 cycles)
CPU 17: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 18: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 704 cycles)
CPU 18: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 19: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 701 cycles)
CPU 19: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 20: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 705 cycles)
CPU 20: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 21: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 701 cycles)
CPU 21: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 22: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 704 cycles)
CPU 22: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 23: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 702 cycles)
CPU 23: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 24: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 760 cycles)
CPU 24: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 25: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 753 cycles)
CPU 25: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 26: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 752 cycles)
CPU 26: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 27: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 753 cycles)
CPU 27: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 28: synchronized ITC with CPU 0 (last diff -4 cycles, maxerr 765 cycles)
CPU 28: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 29: synchronized ITC with CPU 0 (last diff 1 cycles, maxerr 754 cycles)
CPU 29: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 30: synchronized ITC with CPU 0 (last diff 0 cycles, maxerr 760 cycles)
CPU 30: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
CPU 31: synchronized ITC with CPU 0 (last diff -1 cycles, maxerr 753 cycles)
CPU 31: base freq=133.333MHz, ITC ratio=6/1, ITC freq=799.999MHz
Brought up 32 CPUs
Total of 32 processors activated (116523.00 BogoMIPS).
SMBIOS 2.4 present.
DMI: Supermicro I8QBH/I8QBH, BIOS I8QBH 15.006.004RAS 2010/05/10
NET: Registered protocol family 16
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOSAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A08:00: PCIe port services disabled; not requesting _OSC control
acpi PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
acpi PNP0A08:00: host bridge window [io  0x1000-0x8fff]
acpi PNP0A08:00: host bridge window [mem 0x50000000-0x9fffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x1000-0x8fff]
pci_bus 0000:00: root bus resource [mem 0x50000000-0x9fffffff]
pci_bus 0000:00: root bus resource [bus 00-7f]
pci 0000:00:00.0: [8086:3407] type 00 class 0x060000
pci 0000:00:01.0: [8086:3408] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:340a] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:340c] type 01 class 0x060400
pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
pci 0000:00:07.0: [8086:340e] type 01 class 0x060400
pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:00:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:00:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:00:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:00:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:00:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:00:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:00:0d.7: [8086:341b] type 00 class 0x060000
pci 0000:00:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:00:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:00:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:00:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:00:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:00:0f.0: [8086:3424] type 00 class 0x110100
pci 0000:00:10.0: [8086:3425] type 00 class 0x080000
pci 0000:00:10.1: [8086:3426] type 00 class 0x080000
pci 0000:00:11.0: [8086:3427] type 00 class 0x080000
pci 0000:00:11.1: [8086:3428] type 00 class 0x080000
pci 0000:00:13.0: [8086:342d] type 00 class 0x080020
pci 0000:00:13.0: reg 0x10: [mem 0x58320000-0x58320fff]
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: [8086:342e] type 00 class 0x080000
pci 0000:00:14.1: [8086:3422] type 00 class 0x080000
pci 0000:00:14.2: [8086:3423] type 00 class 0x080000
pci 0000:00:14.3: [8086:3438] type 00 class 0x080000
pci 0000:00:15.0: [8086:342f] type 00 class 0x080020
pci 0000:00:16.0: [8086:3430] type 00 class 0x088000
pci 0000:00:16.0: reg 0x10: [mem 0x58300000-0x58303fff 64bit]
pci 0000:00:16.1: [8086:3431] type 00 class 0x088000
pci 0000:00:16.1: reg 0x10: [mem 0x58304000-0x58307fff 64bit]
pci 0000:00:16.2: [8086:3432] type 00 class 0x088000
pci 0000:00:16.2: reg 0x10: [mem 0x58308000-0x5830bfff 64bit]
pci 0000:00:16.3: [8086:3433] type 00 class 0x088000
pci 0000:00:16.3: reg 0x10: [mem 0x5830c000-0x5830ffff 64bit]
pci 0000:00:16.4: [8086:3429] type 00 class 0x088000
pci 0000:00:16.4: reg 0x10: [mem 0x58310000-0x58313fff 64bit]
pci 0000:00:16.5: [8086:342a] type 00 class 0x088000
pci 0000:00:16.5: reg 0x10: [mem 0x58314000-0x58317fff 64bit]
pci 0000:00:16.6: [8086:342b] type 00 class 0x088000
pci 0000:00:16.6: reg 0x10: [mem 0x58318000-0x5831bfff 64bit]
pci 0000:00:16.7: [8086:342c] type 00 class 0x088000
pci 0000:00:16.7: reg 0x10: [mem 0x5831c000-0x5831ffff 64bit]
pci 0000:00:1a.0: [8086:3a37] type 00 class 0x0c0300
pci 0000:00:1a.0: reg 0x20: [io  0x40c0-0x40df]
pci 0000:00:1a.1: [8086:3a38] type 00 class 0x0c0300
pci 0000:00:1a.1: reg 0x20: [io  0x40a0-0x40bf]
pci 0000:00:1a.2: [8086:3a39] type 00 class 0x0c0300
random: nonblocking pool is initialized
pci 0000:00:1a.2: reg 0x20: [io  0x4080-0x409f]
pci 0000:00:1a.7: [8086:3a3c] type 00 class 0x0c0320
pci 0000:00:1a.7: reg 0x10: [mem 0x58321400-0x583217ff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3a40] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:3a42] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:3a44] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:3a46] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:3a48] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: [8086:3a4a] type 01 class 0x060400
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:3a34] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0x4060-0x407f]
pci 0000:00:1d.1: [8086:3a35] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0x4040-0x405f]
pci 0000:00:1d.2: [8086:3a36] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0x4020-0x403f]
pci 0000:00:1d.7: [8086:3a3a] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0x58321000-0x583213ff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:3a18] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3a20] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0x4138-0x413f]
pci 0000:00:1f.2: reg 0x14: [io  0x414c-0x414f]
pci 0000:00:1f.2: reg 0x18: [io  0x4130-0x4137]
pci 0000:00:1f.2: reg 0x1c: [io  0x4148-0x414b]
pci 0000:00:1f.2: reg 0x20: [io  0x4110-0x411f]
pci 0000:00:1f.2: reg 0x24: [io  0x4100-0x410f]
pci 0000:00:1f.3: [8086:3a30] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0x58321800-0x583218ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x4000-0x401f]
pci 0000:00:1f.5: [8086:3a26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io  0x4128-0x412f]
pci 0000:00:1f.5: reg 0x14: [io  0x4144-0x4147]
pci 0000:00:1f.5: reg 0x18: [io  0x4120-0x4127]
pci 0000:00:1f.5: reg 0x1c: [io  0x4140-0x4143]
pci 0000:00:1f.5: reg 0x20: [io  0x40f0-0x40ff]
pci 0000:00:1f.5: reg 0x24: [io  0x40e0-0x40ef]
pci 0000:01:00.0: [8086:10c9] type 00 class 0x020000
pci 0000:01:00.0: reg 0x10: [mem 0x58260000-0x5827ffff]
pci 0000:01:00.0: reg 0x14: [mem 0x58240000-0x5825ffff]
pci 0000:01:00.0: reg 0x18: [io  0x3020-0x303f]
pci 0000:01:00.0: reg 0x1c: [mem 0x58284000-0x58287fff]
pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
pci 0000:01:00.1: [8086:10c9] type 00 class 0x020000
pci 0000:01:00.1: reg 0x10: [mem 0x58220000-0x5823ffff]
pci 0000:01:00.1: reg 0x14: [mem 0x58200000-0x5821ffff]
pci 0000:01:00.1: reg 0x18: [io  0x3000-0x301f]
pci 0000:01:00.1: reg 0x1c: [mem 0x58280000-0x58283fff]
pci 0000:01:00.1: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.0:   bridge window [io  0x3000-0x3fff]
pci 0000:00:01.0:   bridge window [mem 0x58200000-0x582fffff]
pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:01:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1000:0058] type 00 class 0x010000
pci 0000:03:00.0: reg 0x10: [io  0x2000-0x20ff]
pci 0000:03:00.0: reg 0x14: [mem 0x58110000-0x58113fff 64bit]
pci 0000:03:00.0: reg 0x1c: [mem 0x58100000-0x5810ffff 64bit]
pci 0000:03:00.0: reg 0x30: [mem 0xffe00000-0xffffffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:00:05.0: PCI bridge to [bus 03]
pci 0000:00:05.0:   bridge window [io  0x2000-0x2fff]
pci 0000:00:05.0:   bridge window [mem 0x58100000-0x581fffff]
pci 0000:03:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window
pci 0000:00:07.0: PCI bridge to [bus 04]
pci 0000:00:1c.0: PCI bridge to [bus 05]
pci 0000:00:1c.1: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.4: PCI bridge to [bus 09]
pci 0000:00:1c.5: PCI bridge to [bus 0a]
pci 0000:0b:04.0: [1002:515e] type 00 class 0x030000
pci 0000:0b:04.0: reg 0x10: [mem 0x50000000-0x57ffffff pref]
pci 0000:0b:04.0: reg 0x14: [io  0x1000-0x10ff]
pci 0000:0b:04.0: reg 0x18: [mem 0x58000000-0x5800ffff]
pci 0000:0b:04.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:0b:04.0: supports D1 D2
pci 0000:00:1e.0: PCI bridge to [bus 0b] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x580fffff]
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x1000-0x8fff] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x50000000-0x9fffffff] (subtractive decode)
pci 0000:0b:04.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig Segments MSI]
acpi PNP0A08:01: PCIe port services disabled; not requesting _OSC control
acpi PNP0A08:01: host bridge window [io  0x9000-0xfffe]
PCI host bridge to bus 0000:80
pci_bus 0000:80: root bus resource [io  0x9000-0xfffe]
pci_bus 0000:80: root bus resource [bus 80-ff]
pci 0000:80:00.0: [8086:3407] type 00 class 0x060000
pci 0000:80:01.0: [8086:3408] type 01 class 0x060400
pci 0000:80:01.0: PME# supported from D0 D3hot D3cold
pci 0000:80:03.0: [8086:340a] type 01 class 0x060400
pci 0000:80:03.0: PME# supported from D0 D3hot D3cold
pci 0000:80:05.0: [8086:340c] type 01 class 0x060400
pci 0000:80:05.0: PME# supported from D0 D3hot D3cold
pci 0000:80:07.0: [8086:340e] type 01 class 0x060400
pci 0000:80:07.0: PME# supported from D0 D3hot D3cold
pci 0000:80:0d.0: [8086:343a] type 00 class 0x060000
pci 0000:80:0d.1: [8086:343b] type 00 class 0x060000
pci 0000:80:0d.2: [8086:343c] type 00 class 0x060000
pci 0000:80:0d.3: [8086:343d] type 00 class 0x060000
pci 0000:80:0d.4: [8086:3418] type 00 class 0x060000
pci 0000:80:0d.5: [8086:3419] type 00 class 0x060000
pci 0000:80:0d.6: [8086:341a] type 00 class 0x060000
pci 0000:80:0d.7: [8086:341b] type 00 class 0x060000
pci 0000:80:0e.0: [8086:341c] type 00 class 0x060000
pci 0000:80:0e.1: [8086:341d] type 00 class 0x060000
pci 0000:80:0e.2: [8086:341e] type 00 class 0x060000
pci 0000:80:0e.3: [8086:341f] type 00 class 0x060000
pci 0000:80:0e.4: [8086:3439] type 00 class 0x060000
pci 0000:80:0f.0: [8086:3424] type 00 class 0x110100
pci 0000:80:10.0: [8086:3425] type 00 class 0x080000
pci 0000:80:10.1: [8086:3426] type 00 class 0x080000
pci 0000:80:11.0: [8086:3427] type 00 class 0x080000
pci 0000:80:11.1: [8086:3428] type 00 class 0x080000
pci 0000:80:13.0: [8086:342d] type 00 class 0x080020
pci 0000:80:13.0: reg 0x10: [mem 0xa0220000-0xa0220fff]
pci 0000:80:13.0: PME# supported from D0 D3hot D3cold
pci 0000:80:14.0: [8086:342e] type 00 class 0x080000
pci 0000:80:14.1: [8086:3422] type 00 class 0x080000
pci 0000:80:14.2: [8086:3423] type 00 class 0x080000
pci 0000:80:14.3: [8086:3438] type 00 class 0x080000
pci 0000:80:15.0: [8086:342f] type 00 class 0x080020
pci 0000:80:16.0: [8086:3430] type 00 class 0x088000
pci 0000:80:16.0: reg 0x10: [mem 0xa0200000-0xa0203fff 64bit]
pci 0000:80:16.1: [8086:3431] type 00 class 0x088000
pci 0000:80:16.1: reg 0x10: [mem 0xa0204000-0xa0207fff 64bit]
pci 0000:80:16.2: [8086:3432] type 00 class 0x088000
pci 0000:80:16.2: reg 0x10: [mem 0xa0208000-0xa020bfff 64bit]
pci 0000:80:16.3: [8086:3433] type 00 class 0x088000
pci 0000:80:16.3: reg 0x10: [mem 0xa020c000-0xa020ffff 64bit]
pci 0000:80:16.4: [8086:3429] type 00 class 0x088000
pci 0000:80:16.4: reg 0x10: [mem 0xa0210000-0xa0213fff 64bit]
pci 0000:80:16.5: [8086:342a] type 00 class 0x088000
pci 0000:80:16.5: reg 0x10: [mem 0xa0214000-0xa0217fff 64bit]
pci 0000:80:16.6: [8086:342b] type 00 class 0x088000
pci 0000:80:16.6: reg 0x10: [mem 0xa0218000-0xa021bfff 64bit]
pci 0000:80:16.7: [8086:342c] type 00 class 0x088000
pci 0000:80:16.7: reg 0x10: [mem 0xa021c000-0xa021ffff 64bit]
pci 0000:80:13.0: can't claim BAR 0 [mem 0xa0220000-0xa0220fff]: no compatible bridge window
pci 0000:80:16.0: can't claim BAR 0 [mem 0xa0200000-0xa0203fff 64bit]: no compatible bridge window
pci 0000:80:16.1: can't claim BAR 0 [mem 0xa0204000-0xa0207fff 64bit]: no compatible bridge window
pci 0000:80:16.2: can't claim BAR 0 [mem 0xa0208000-0xa020bfff 64bit]: no compatible bridge window
pci 0000:80:16.3: can't claim BAR 0 [mem 0xa020c000-0xa020ffff 64bit]: no compatible bridge window
pci 0000:80:16.4: can't claim BAR 0 [mem 0xa0210000-0xa0213fff 64bit]: no compatible bridge window
pci 0000:80:16.5: can't claim BAR 0 [mem 0xa0214000-0xa0217fff 64bit]: no compatible bridge window
pci 0000:80:16.6: can't claim BAR 0 [mem 0xa0218000-0xa021bfff 64bit]: no compatible bridge window
pci 0000:80:16.7: can't claim BAR 0 [mem 0xa021c000-0xa021ffff 64bit]: no compatible bridge window
acpiphp: Slot [0] registered
pci 0000:81:00.0: [8086:10c9] type 00 class 0x020000
pci 0000:81:00.0: reg 0x10: [mem 0xa0160000-0xa017ffff]
pci 0000:81:00.0: reg 0x14: [mem 0xa0140000-0xa015ffff]
pci 0000:81:00.0: reg 0x18: [io  0xa020-0xa03f]
pci 0000:81:00.0: reg 0x1c: [mem 0xa0184000-0xa0187fff]
pci 0000:81:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:81:00.0: PME# supported from D0 D3hot D3cold
pci 0000:81:00.1: [8086:10c9] type 00 class 0x020000
pci 0000:81:00.1: reg 0x10: [mem 0xa0120000-0xa013ffff]
pci 0000:81:00.1: reg 0x14: [mem 0xa0100000-0xa011ffff]
pci 0000:81:00.1: reg 0x18: [io  0xa000-0xa01f]
pci 0000:81:00.1: reg 0x1c: [mem 0xa0180000-0xa0183fff]
pci 0000:81:00.1: reg 0x30: [mem 0xfffe0000-0xffffffff pref]
pci 0000:81:00.1: PME# supported from D0 D3hot D3cold
pci 0000:80:01.0: PCI bridge to [bus 81]
pci 0000:80:01.0:   bridge window [io  0xa000-0xafff]
pci 0000:80:01.0:   bridge window [mem 0xa0100000-0xa01fffff]
pci 0000:80:01.0: can't claim BAR 8 [mem 0xa0100000-0xa01fffff]: no compatible bridge window
pci 0000:81:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
pci 0000:81:00.1: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window
acpiphp: Slot [0-1] registered
pci 0000:80:03.0: PCI bridge to [bus 82]
acpiphp: Slot [0-2] registered
pci 0000:83:00.0: [1000:0058] type 00 class 0x010000
pci 0000:83:00.0: reg 0x10: [io  0x9000-0x90ff]
pci 0000:83:00.0: reg 0x14: [mem 0xa0010000-0xa0013fff 64bit]
pci 0000:83:00.0: reg 0x1c: [mem 0xa0000000-0xa000ffff 64bit]
pci 0000:83:00.0: reg 0x30: [mem 0xffe00000-0xffffffff pref]
pci 0000:83:00.0: supports D1 D2
pci 0000:80:05.0: PCI bridge to [bus 83]
pci 0000:80:05.0:   bridge window [io  0x9000-0x9fff]
pci 0000:80:05.0:   bridge window [mem 0xa0000000-0xa00fffff]
pci 0000:80:05.0: can't claim BAR 8 [mem 0xa0000000-0xa00fffff]: no compatible bridge window
pci 0000:83:00.0: can't claim BAR 6 [mem 0xffe00000-0xffffffff pref]: no compatible bridge window
acpiphp: Slot [0-3] registered
pci 0000:80:07.0: PCI bridge to [bus 84]
ACPI: Enabled 7 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:0b:04.0
vgaarb: device added: PCI:0000:0b:04.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:0b:04.0
SCSI subsystem initialized
libata version 3.00 loaded.
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
Switched to clocksource itc
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x053f] has been reserved
system 00:01: [io  0x0400-0x047f] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed8bffe] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp: PnP ACPI: found 4 devices
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 4, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP: reno registered
UDP hash table entries: 8192 (order: 2, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 2, 262144 bytes)
NET: Registered protocol family 1
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49
GSI 16 (level, low) -> CPU 0 (0x0000) vector 49 unregistered
GSI 17 (level, low) -> CPU 1 (0x0100) vector 49
GSI 17 (level, low) -> CPU 1 (0x0100) vector 49 unregistered
GSI 18 (level, low) -> CPU 2 (0x0200) vector 49
GSI 18 (level, low) -> CPU 2 (0x0200) vector 49 unregistered
GSI 18 (level, low) -> CPU 3 (0x0300) vector 49
GSI 18 (level, low) -> CPU 3 (0x0300) vector 49 unregistered
GSI 16 (level, low) -> CPU 4 (0x0400) vector 49
GSI 16 (level, low) -> CPU 4 (0x0400) vector 49 unregistered
GSI 17 (level, low) -> CPU 5 (0x0500) vector 49
GSI 17 (level, low) -> CPU 5 (0x0500) vector 49 unregistered
GSI 18 (level, low) -> CPU 6 (0x0600) vector 49
GSI 18 (level, low) -> CPU 6 (0x0600) vector 49 unregistered
GSI 16 (level, low) -> CPU 7 (0x0700) vector 49
GSI 16 (level, low) -> CPU 7 (0x0700) vector 49 unregistered
pci 0000:0b:04.0: Video device with shadowed ROM
PCI: CLS mismatch (64 != 32), using 128 bytes
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 4864kB freed
perfmon: version 2.0 IRQ 238
perfmon: Montecito PMU detected, 27 PMCs, 35 PMDs, 12 counters (47 bits)
PAL Information Facility v0.5
perfmon: added sampling format default_format
perfmon_default_smpl: default_format v2.0 registered
futex hash table entries: 8192 (order: 4, 1048576 bytes)
HugeTLB registered 256 MB page size, pre-allocated 0 pages
SGI XFS with security attributes, no debug enabled
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
00:02: ttyS0 at I/O 0x3f8 (irq = 44, base_baud = 115200) is a 16550A
console [ttyS0] enabled
bootconsole [uart0] disabled
00:03: ttyS1 at I/O 0x2f8 (irq = 45, base_baud = 115200) is a 16550A
EFI Time Services Driver v0.4
brd: module loaded
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
ide-cd driver 5.00
ata_piix 0000:00:1f.2: version 2.13
GSI 17 (level, low) -> CPU 8 (0x1000) vector 49
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host0: ata_piix
scsi host1: ata_piix
ata1: SATA max UDMA/133 cmd 0x4138 ctl 0x414c bmdma 0x4110 irq 50
ata2: SATA max UDMA/133 cmd 0x4130 ctl 0x4148 bmdma 0x4118 irq 50
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0x4128 ctl 0x4144 bmdma 0x40f0 irq 50
ata4: SATA max UDMA/133 cmd 0x4120 ctl 0x4140 bmdma 0x40f8 irq 50
e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
e1000: Copyright (c) 1999-2006 Intel Corporation.
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.2.15-k
igb: Copyright (c) 2007-2014 Intel Corporation.
GSI 28 (level, low) -> CPU 9 (0x1100) vector 50
igb 0000:01:00.0: added PHC on eth0
igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3a
igb 0000:01:00.0: eth0: PBA No: Unknown
igb 0000:01:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
GSI 40 (level, low) -> CPU 10 (0x1200) vector 60
ata4: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata2.00: SATA link down (SStatus 0 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
igb 0000:01:00.1: added PHC on eth1
ata1.00: SATA link down (SStatus 0 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:3b
igb 0000:01:00.1: eth1: PBA No: Unknown
igb 0000:01:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
pci 0000:80:01.0: can't enable device: BAR 8 [mem 0xa0100000-0xa01fffff] not claimed
pci 0000:80:01.0: Error enabling bridge (-22), continuing
GSI 52 (level, low) -> CPU 11 (0x1300) vector 70
igb 0000:81:00.0: added PHC on eth2
igb 0000:81:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:81:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b0
igb 0000:81:00.0: eth2: PBA No: Unknown
igb 0000:81:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
pci 0000:80:01.0: can't enable device: BAR 8 [mem 0xa0100000-0xa01fffff] not claimed
pci 0000:80:01.0: Error enabling bridge (-22), continuing
GSI 64 (level, low) -> CPU 12 (0x1400) vector 80
igb 0000:81:00.1: added PHC on eth3
igb 0000:81:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:81:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:30:48:fe:19:b1
igb 0000:81:00.1: eth3: PBA No: Unknown
igb 0000:81:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
Fusion MPT base driver 3.04.20
Copyright (c) 1999-2008 LSI Corporation
Fusion MPT SPI Host driver 3.04.20
Fusion MPT SAS Host driver 3.04.20
GSI 26 (level, low) -> CPU 13 (0x1500) vector 90
mptbase: ioc0: Initiating bringup
ioc0: LSISAS1068E B3: Capabilities={Initiator}
scsi host4: ioc0: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=92
mptsas: ioc0: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecb8f49
scsi 4:0:0:0: Direct-Access     SEAGATE  ST9146802SS      0003 PQ: 0 ANSI: 5
pci 0000:80:05.0: can't enable device: BAR 8 [mem 0xa0000000-0xa00fffff] not claimed
pci 0000:80:05.0: Error enabling bridge (-22), continuing
sd 4:0:0:0: [sda] 286749488 512-byte logical blocks: (146 GB/136 GiB)
GSI 50 (level, low) -> CPU 14 (0x1600) vector 91
mptbase: ioc1: Initiating bringup
sd 4:0:0:0: [sda] Write Protect is off
sd 4:0:0:0: [sda] Mode Sense: b3 00 10 08
sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
 sda: sda1 sda2 sda3
sd 4:0:0:0: [sda] Attached SCSI disk
ioc1: LSISAS1068E B3: Capabilities={Initiator}
scsi host5: ioc1: LSISAS1068E B3, FwRev=011a0000h, Ports=1, MaxQ=478, IRQ=93
mptsas: ioc1: attaching ssp device: fw_channel 0, fw_id 6, phy 6, sas_addr 0x5000c5000ecada69
scsi 5:0:0:0: Direct-Access     SEAGATE  ST9146802SS      0003 PQ: 0 ANSI: 5
mousedev: PS/2 mouse device common for all mice
EFI Variables Facility v0.08 2004-May-17
sd 5:0:0:0: [sdb] 286749488 512-byte logical blocks: (146 GB/136 GiB)
sd 5:0:0:0: [sdb] Write Protect is off
sd 5:0:0:0: [sdb] Mode Sense: b3 00 10 08
sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
TCP: cubic registered
NET: Registered protocol family 17
console [netcon0] enabled
netconsole: network logging started
 sdb: sdb1 sdb2
sd 5:0:0:0: [sdb] Attached SCSI disk
Freeing unused kernel memory: 1088K (e000000004f30000 - e000000005040000)
udevd (1771): /proc/1771/oom_adj is deprecated, please use /proc/1771/oom_score_adj instead.
udevd version 128 started
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
GSI 16 (level, low) -> CPU 15 (0x1700) vector 92
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1a.0: irq 49, io base 0x000040c0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1a.1: irq 50, io base 0x000040a0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 (level, low) -> CPU 16 (0x2000) vector 93
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.2: irq 51, io base 0x00004080
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.0: irq 49, io base 0x00004060
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.1: irq 50, io base 0x00004040
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.2: irq 51, io base 0x00004020
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usb 6-1: new low-speed USB device number 2 using uhci_hcd
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1/0003:0624:0200.0001/input/input0
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sda3): using internal journal
EXT3-fs (sda3): mounted filesystem with ordered data mode
hid-generic 0003:0624:0200.0001: input: USB HID v1.10 Mouse [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input1
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/0003:0624:0200.0002/input/input1
hid-generic 0003:0624:0200.0002: input: USB HID v1.10 Keyboard [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input0
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
udevd version 128 started
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.7: EHCI Host Controller
ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 7
ehci-pci 0000:00:1a.7: debug port 1
ehci-pci 0000:00:1a.7: cache line size of 128 is not supported
ehci-pci 0000:00:1a.7: irq 51, io mem 0x58321400
sd 4:0:0:0: Attached scsi generic sg0 type 0
sd 5:0:0:0: Attached scsi generic sg1 type 0
ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 6 ports detected
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 6-1: USB disconnect, device number 2
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 8
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 128 is not supported
ehci-pci 0000:00:1d.7: irq 49, io mem 0x58321000
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 6 ports detected
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
Adding 8191936k swap on /dev/sda2.  Priority:-1 extents:1 across:8191936k 
usb 6-1: new low-speed USB device number 3 using uhci_hcd
Adding 8185024k swap on /dev/sdb1.  Priority:-2 extents:1 across:8185024k 
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.0/0003:0624:0200.0003/input/input4
hid-generic 0003:0624:0200.0003: input: USB HID v1.10 Keyboard [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input0
input: Avocent USB_AMIQ as /devices/pci0000:00/0000:00:1d.2/usb6/6-1/6-1:1.1/0003:0624:0200.0004/input/input5
hid-generic 0003:0624:0200.0004: input: USB HID v1.10 Mouse [Avocent USB_AMIQ] on usb-0000:00:1d.2-1/input1
device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3-fs (sdb2): using internal journal
EXT3-fs (sdb2): mounted filesystem with ordered data mode
igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
kernel unaligned access to 0xe00000031f7e000e, ip=0xa000000100a9b3f0
kernel unaligned access to 0xe00000031f7f000e, ip=0xa000000100a9b3f0
kernel unaligned access to 0xe00000031f81000e, ip=0xa000000100a9b3f0
kernel unaligned access to 0xe00000031f84000e, ip=0xa000000100a9b3f0
kernel unaligned access to 0xe00000031f85000e, ip=0xa000000100a9b3f0

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-27 14:03           ` Bjorn Helgaas
@ 2015-01-27 23:27             ` Tony Luck
  0 siblings, 0 replies; 17+ messages in thread
From: Tony Luck @ 2015-01-27 23:27 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Yinghai Lu, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Tue, Jan 27, 2015 at 6:03 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> Just to make sure we're planning the same thing, I expect that we will
> fix or workaround both issues so it works just as well as v3.18 by the
> time v3.19 is released.  This is a system in the field, and we should
> be able to figure out how to deal with the broken firmware.  Asking
> users to upgrade their firmware is not the solution I'm looking for.

Good to hear.  BIOS in this machine is dated May, 2010 ... I doubt I could
find anyone who still remembers how to build a BIOS for it, let alone has
any motivation to actually do it.

-Tony

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-27 23:24         ` Tony Luck
@ 2015-01-28  0:54           ` Yinghai Lu
  2015-01-30 16:56             ` Bjorn Helgaas
  0 siblings, 1 reply; 17+ messages in thread
From: Yinghai Lu @ 2015-01-28  0:54 UTC (permalink / raw)
  To: Tony Luck
  Cc: Bjorn Helgaas, Linus Torvalds, linux-pci,
	Linux Kernel Mailing List, Lucas Stach, Richard Zhu,
	Marek Kordik, Alex Williamson, Andreas Hartmann, Alexey Voronkov,
	David Airlie, Alex Deucher

On Tue, Jan 27, 2015 at 3:24 PM, Tony Luck <tony.luck@gmail.com> wrote:
> On Mon, Jan 26, 2015 at 7:43 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> Can you please get boot bog with "debug ignore_logleve"?
>>
>> we should get print out from
>>
>> +               dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
>> +                                &orig_res, res);
>
> Attached ... but I don't see any "clipped" messages

Good. so the system should just work as before but have annoying warnings.

Do we need to put the paper back to hide the warning?

Thanks

Yinghai

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-28  0:54           ` Yinghai Lu
@ 2015-01-30 16:56             ` Bjorn Helgaas
  2015-01-30 18:01               ` Tony Luck
  2015-01-30 21:49               ` Yinghai Lu
  0 siblings, 2 replies; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-30 16:56 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Tony Luck, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Tue, Jan 27, 2015 at 6:54 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Tue, Jan 27, 2015 at 3:24 PM, Tony Luck <tony.luck@gmail.com> wrote:
>> On Mon, Jan 26, 2015 at 7:43 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>> Can you please get boot bog with "debug ignore_logleve"?
>>>
>>> we should get print out from
>>>
>>> +               dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
>>> +                                &orig_res, res);
>>
>> Attached ... but I don't see any "clipped" messages
>
> Good. so the system should just work as before but have annoying warnings.
>
> Do we need to put the paper back to hide the warning?

Ping, I'm not sure this is resolved.

Tony, does the system work as it did before?  Is the only problem that
now we have more warnings than we did before?

Yinghai, I sort of feel like I'm being left to sweep up behind your
changes here.  I *could* analyze this and figure out what's going on
and fix it, but I don't have time to do that for everybody, and I
consider that more your job.

If we start with the same _CRS config and same device config, ideally
PCI enumeration would produce the same messages, same warnings, and
same resource assignments no matter what arch we feed them to, because
enumeration is not really arch-specific.  So if ia64 does something
different here, I think something needs to be fixed.

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-30 16:56             ` Bjorn Helgaas
@ 2015-01-30 18:01               ` Tony Luck
  2015-01-30 18:18                 ` Bjorn Helgaas
  2015-01-30 21:49               ` Yinghai Lu
  1 sibling, 1 reply; 17+ messages in thread
From: Tony Luck @ 2015-01-30 18:01 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Yinghai Lu, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Fri, Jan 30, 2015 at 8:56 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> Tony, does the system work as it did before?  Is the only problem that
> now we have more warnings than we did before?

Yup - things seem to be working. Just have a bunch of new console messages.

It seems that at least some of them are valid - the BIOS isn't describing some
things that it should.  I don't think we need to re-apply code that
used to paper
over this problem. I can just add these to the list of "harmless" messages to
ignore when running new kernels on this old machine.

Or did I misunderstand some part of this thread?

-Tony

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-30 18:01               ` Tony Luck
@ 2015-01-30 18:18                 ` Bjorn Helgaas
  0 siblings, 0 replies; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-30 18:18 UTC (permalink / raw)
  To: Tony Luck
  Cc: Yinghai Lu, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Fri, Jan 30, 2015 at 12:01 PM, Tony Luck <tony.luck@gmail.com> wrote:
> On Fri, Jan 30, 2015 at 8:56 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
>> Tony, does the system work as it did before?  Is the only problem that
>> now we have more warnings than we did before?
>
> Yup - things seem to be working. Just have a bunch of new console messages.
>
> It seems that at least some of them are valid - the BIOS isn't describing some
> things that it should.  I don't think we need to re-apply code that
> used to paper
> over this problem. I can just add these to the list of "harmless" messages to
> ignore when running new kernels on this old machine.
>
> Or did I misunderstand some part of this thread?

Nope, I think the complaints about BARs 0 and 8 on bus 80 are
legitimate errors, and adding them to the list of "harmless" messages
is the right thing to do.

The ones complaining about BAR 6 (an option ROM) are the ones I'm more
concerned about.  There's no address space assigned to them, but I
don't think that indicates a firmware defect, and the message is sort
of cryptic, so I don't want to emit it more often than we have to.

But if ia64 is handling these ROMs the same way as x86, this is just
an opportunity for future improvement, and we don't need to do
anything right now.

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-30 16:56             ` Bjorn Helgaas
  2015-01-30 18:01               ` Tony Luck
@ 2015-01-30 21:49               ` Yinghai Lu
  2015-01-30 22:12                 ` Bjorn Helgaas
  1 sibling, 1 reply; 17+ messages in thread
From: Yinghai Lu @ 2015-01-30 21:49 UTC (permalink / raw)
  To: Bjorn Helgaas
  Cc: Tony Luck, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Fri, Jan 30, 2015 at 8:56 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> On Tue, Jan 27, 2015 at 6:54 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>> On Tue, Jan 27, 2015 at 3:24 PM, Tony Luck <tony.luck@gmail.com> wrote:
>>> On Mon, Jan 26, 2015 at 7:43 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>> Can you please get boot bog with "debug ignore_logleve"?
>>>>
>>>> we should get print out from
>>>>
>>>> +               dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
>>>> +                                &orig_res, res);
>>>
>>> Attached ... but I don't see any "clipped" messages
>>
>> Good. so the system should just work as before but have annoying warnings.
>>
>> Do we need to put the paper back to hide the warning?
>
> Ping, I'm not sure this is resolved.
>
> Tony, does the system work as it did before?  Is the only problem that
> now we have more warnings than we did before?
>
> Yinghai, I sort of feel like I'm being left to sweep up behind your
> changes here.  I *could* analyze this and figure out what's going on
> and fix it, but I don't have time to do that for everybody, and I
> consider that more your job.

Sorry to hear that.

I did respond the email, and gave the the explanation.

>
> If we start with the same _CRS config and same device config, ideally
> PCI enumeration would produce the same messages, same warnings, and
> same resource assignments no matter what arch we feed them to, because
> enumeration is not really arch-specific.  So if ia64 does something
> different here, I think something needs to be fixed.

ia64 was doing different,
1. It check if the range is valid with bus resources. and only call
pci_claim_resource for that path.
2. and it does not reset invalid resource to allocate new one.

This patch change to call pci_claim_resource directly, so we have warning now.
but just warning as we did not reset the resource.

Thanks

Yinghai

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
  2015-01-30 21:49               ` Yinghai Lu
@ 2015-01-30 22:12                 ` Bjorn Helgaas
  0 siblings, 0 replies; 17+ messages in thread
From: Bjorn Helgaas @ 2015-01-30 22:12 UTC (permalink / raw)
  To: Yinghai Lu
  Cc: Tony Luck, Linus Torvalds, linux-pci, Linux Kernel Mailing List,
	Lucas Stach, Richard Zhu, Marek Kordik, Alex Williamson,
	Andreas Hartmann, Alexey Voronkov, David Airlie, Alex Deucher

On Fri, Jan 30, 2015 at 3:49 PM, Yinghai Lu <yinghai@kernel.org> wrote:
> On Fri, Jan 30, 2015 at 8:56 AM, Bjorn Helgaas <bhelgaas@google.com> wrote:
>> On Tue, Jan 27, 2015 at 6:54 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>> On Tue, Jan 27, 2015 at 3:24 PM, Tony Luck <tony.luck@gmail.com> wrote:
>>>> On Mon, Jan 26, 2015 at 7:43 PM, Yinghai Lu <yinghai@kernel.org> wrote:
>>>>> Can you please get boot bog with "debug ignore_logleve"?
>>>>>
>>>>> we should get print out from
>>>>>
>>>>> +               dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
>>>>> +                                &orig_res, res);
>>>>
>>>> Attached ... but I don't see any "clipped" messages
>>>
>>> Good. so the system should just work as before but have annoying warnings.
>>>
>>> Do we need to put the paper back to hide the warning?
>>
>> Ping, I'm not sure this is resolved.
>>
>> Tony, does the system work as it did before?  Is the only problem that
>> now we have more warnings than we did before?
>>
>> Yinghai, I sort of feel like I'm being left to sweep up behind your
>> changes here.  I *could* analyze this and figure out what's going on
>> and fix it, but I don't have time to do that for everybody, and I
>> consider that more your job.
>
> Sorry to hear that.
>
> I did respond the email, and gave the the explanation.
>
>>
>> If we start with the same _CRS config and same device config, ideally
>> PCI enumeration would produce the same messages, same warnings, and
>> same resource assignments no matter what arch we feed them to, because
>> enumeration is not really arch-specific.  So if ia64 does something
>> different here, I think something needs to be fixed.
>
> ia64 was doing different,
> 1. It check if the range is valid with bus resources. and only call
> pci_claim_resource for that path.
> 2. and it does not reset invalid resource to allocate new one.
>
> This patch change to call pci_claim_resource directly, so we have warning now.
> but just warning as we did not reset the resource.

OK, I guess I just didn't understand what you were saying.

So I'll consider this resolved unless I hear somebody say otherwise.

Bjorn

^ permalink raw reply	[flat|nested] 17+ messages in thread

* Re: [GIT PULL] PCI fixes for v3.19
       [not found] <20150204191831.GA13785@google.com>
@ 2015-02-11 16:48 ` Bjorn Helgaas
  0 siblings, 0 replies; 17+ messages in thread
From: Bjorn Helgaas @ 2015-02-11 16:48 UTC (permalink / raw)
  To: Linus Torvalds
  Cc: linux-pci, linux-kernel, Lucas Stach, Myron Stowe, Nix,
	Charlotte Richardson

[+cc lists, etc.; sorry, this has been merged already, but I forgot to
cc: everybody the first time]

On Wed, Feb 4, 2015 at 1:18 PM, Bjorn Helgaas <bhelgaas@google.com> wrote:
> Hi Linus,
>
> These are a regression fix for read-only BARs, a DesignWare fix that keeps
> drivers from using MSI-X (which isn't supported), and a DMI quirk to handle
> ftServer the same whether it says Stratus or NEC on the front.
>
> Bjorn
>
>
> The following changes since commit f175aa2c9f6cc08f043e85ea37f44ef3676cbac1:
>
>   MAINTAINERS: Update Richard Zhu's email address (2015-01-22 13:40:59 -0600)
>
> are available in the git repository at:
>
>   git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git tags/pci-v3.19-fixes-2
>
> for you to fetch changes up to 06cf35f903aa6da0cc8d9f81e9bcd1f7e1b534bb:
>
>   PCI: Handle read-only BARs on AMD CS553x devices (2015-02-03 20:28:02 -0600)
>
> ----------------------------------------------------------------
> PCI updates for v3.19:
>
>   Enumeration
>     - Scan all device numbers on NEC as well as Stratus (Charlotte Richardson)
>
>   Resource management
>     - Handle read-only BARs on AMD CS553x devices (Myron Stowe)
>
>   Synopsys DesignWare
>     - Reject MSI-X IRQs (Lucas Stach)
>
> ----------------------------------------------------------------
> Charlotte Richardson (1):
>       PCI: Add NEC variants to Stratus ftServer PCIe DMI check
>
> Lucas Stach (1):
>       PCI: designware: Reject MSI-X IRQs
>
> Myron Stowe (1):
>       PCI: Handle read-only BARs on AMD CS553x devices
>
>  arch/x86/pci/common.c              | 16 +++++++++++++++
>  drivers/pci/host/pcie-designware.c |  3 +++
>  drivers/pci/quirks.c               | 40 +++++++++++++++++++++++++++++++++++---
>  3 files changed, 56 insertions(+), 3 deletions(-)

^ permalink raw reply	[flat|nested] 17+ messages in thread

end of thread, other threads:[~2015-02-11 16:48 UTC | newest]

Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-23 20:31 [GIT PULL] PCI fixes for v3.19 Bjorn Helgaas
2015-01-26 19:58 ` Tony Luck
2015-01-26 21:02   ` Bjorn Helgaas
2015-01-26 21:24     ` Tony Luck
2015-01-26 23:53       ` Bjorn Helgaas
2015-01-27  3:55         ` Yinghai Lu
2015-01-27 14:03           ` Bjorn Helgaas
2015-01-27 23:27             ` Tony Luck
2015-01-27  3:43       ` Yinghai Lu
2015-01-27 23:24         ` Tony Luck
2015-01-28  0:54           ` Yinghai Lu
2015-01-30 16:56             ` Bjorn Helgaas
2015-01-30 18:01               ` Tony Luck
2015-01-30 18:18                 ` Bjorn Helgaas
2015-01-30 21:49               ` Yinghai Lu
2015-01-30 22:12                 ` Bjorn Helgaas
     [not found] <20150204191831.GA13785@google.com>
2015-02-11 16:48 ` Bjorn Helgaas

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).