LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Minchan Kim <minchan@kernel.org>
To: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>,
	Jerome Marchand <jmarchan@redhat.com>,
	Andrew Morton <akpm@linux-foundation.org>,
	linux-kernel@vger.kernel.org, linux-mm@kvack.org,
	Nitin Gupta <ngupta@vflare.org>
Subject: Re: [PATCH 1/2] zram: free meta out of init_lock
Date: Wed, 28 Jan 2015 09:22:03 +0900	[thread overview]
Message-ID: <20150128002203.GB25828@blaptop> (raw)
In-Reply-To: <20150128001526.GA25828@blaptop>

On Wed, Jan 28, 2015 at 09:15:27AM +0900, Minchan Kim wrote:
> Hello Sergey,
> 
> On Tue, Jan 27, 2015 at 01:03:05PM +0900, Sergey Senozhatsky wrote:
> > Hello,
> > 
> > On (01/27/15 12:18), Minchan Kim wrote:
> > > Hello Sergey,
> > > 
> > > On Tue, Jan 27, 2015 at 11:17:04AM +0900, Sergey Senozhatsky wrote:
> > > > On (01/27/15 01:00), Minchan Kim wrote:
> > > > > On Mon, Jan 26, 2015 at 11:17:09PM +0900, Sergey Senozhatsky wrote:
> > > > > > Hello,
> > > > > > 
> > > > > > On (01/26/15 10:33), Minchan Kim wrote:
> > > > > > > Hello,
> > > > > > > 
> > > > > > > On Sat, Jan 24, 2015 at 12:47:07AM +0900, Sergey Senozhatsky wrote:
> > > > > > > > On (01/23/15 15:48), Jerome Marchand wrote:
> > > > > > > > > On 01/23/2015 03:24 PM, Sergey Senozhatsky wrote:
> > > > > > > > > > On (01/23/15 14:58), Minchan Kim wrote:
> > > > > > > > > >> We don't need to call zram_meta_free, zcomp_destroy and zs_free
> > > > > > > > > >> under init_lock. What we need to prevent race with init_lock
> > > > > > > > > >> in reset is setting NULL into zram->meta (ie, init_done).
> > > > > > > > > >> This patch does it.
> > > > > > > > > >>
> > > > > > > > > >> Signed-off-by: Minchan Kim <minchan@kernel.org>
> > > > > > > > > >> ---
> > > > > > > > > >>  drivers/block/zram/zram_drv.c | 28 ++++++++++++++++------------
> > > > > > > > > >>  1 file changed, 16 insertions(+), 12 deletions(-)
> > > > > > > > > >>
> > > > > > > > > >> diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> > > > > > > > > >> index 9250b3f54a8f..0299d82275e7 100644
> > > > > > > > > >> --- a/drivers/block/zram/zram_drv.c
> > > > > > > > > >> +++ b/drivers/block/zram/zram_drv.c
> > > > > > > > > >> @@ -708,6 +708,7 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > > > > > > > > >>  {
> > > > > > > > > >>  	size_t index;
> > > > > > > > > >>  	struct zram_meta *meta;
> > > > > > > > > >> +	struct zcomp *comp;
> > > > > > > > > >>  
> > > > > > > > > >>  	down_write(&zram->init_lock);
> > > > > > > > > >>  
> > > > > > > > > >> @@ -719,20 +720,10 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > > > > > > > > >>  	}
> > > > > > > > > >>  
> > > > > > > > > >>  	meta = zram->meta;
> > > > > > > > > >> -	/* Free all pages that are still in this zram device */
> > > > > > > > > >> -	for (index = 0; index < zram->disksize >> PAGE_SHIFT; index++) {
> > > > > > > > > >> -		unsigned long handle = meta->table[index].handle;
> > > > > > > > > >> -		if (!handle)
> > > > > > > > > >> -			continue;
> > > > > > > > > >> -
> > > > > > > > > >> -		zs_free(meta->mem_pool, handle);
> > > > > > > > > >> -	}
> > > > > > > > > >> -
> > > > > > > > > >> -	zcomp_destroy(zram->comp);
> > > > > > > > > > 
> > > > > > > > > > I'm not so sure about moving zcomp destruction. if we would have detached it
> > > > > > > > > > from zram, then yes. otherwise, think of zram ->destoy vs ->init race.
> > > > > > > > > > 
> > > > > > > > > > suppose,
> > > > > > > > > > CPU1 waits for down_write() init lock in disksize_store() with new comp already allocated;
> > > > > > > > > > CPU0 detaches ->meta and releases write init lock;
> > > > > > > > > > CPU1 grabs the lock and does zram->comp = comp;
> > > > > > > > > > CPU0 reaches the point of zcomp_destroy(zram->comp);
> > > > > > > > > 
> > > > > > > > > I don't see your point: this patch does not call
> > > > > > > > > zcomp_destroy(zram->comp) anymore, but zram_destroy(comp), where comp is
> > > > > > > > > the old zram->comp.
> > > > > > > > 
> > > > > > > > 
> > > > > > > > oh... yes. sorry! my bad.
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > anyway, on a second thought, do we even want to destoy meta out of init_lock?
> > > > > > > > 
> > > > > > > > I mean, it will let you init new device quicker. but... assume, you have
> > > > > > > > 30G zram (or any other bad-enough number). on CPU0 you reset device -- iterate
> > > > > > > > over 30G meta->table, etc. out of init_lock.
> > > > > > > > on CPU1 you concurrently re-init device and request again 30G.
> > > > > > > > 
> > > > > > > > how bad that can be?
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > diskstore called on already initialised device is also not so perfect.
> > > > > > > > we first will try to allocate ->meta (vmalloc pages for another 30G),
> > > > > > > > then allocate comp, then down_write() init lock to find out that device
> > > > > > > > is initialised and we need to release allocated memory.
> > > > > > > > 
> > > > > > > > 
> > > > > > > > 
> > > > > > > > may be we better keep ->meta destruction under init_lock and additionally
> > > > > > > > move ->meta and ->comp allocation under init_lock in disksize_store()?
> > > > > > > > 
> > > > > > > > like the following one:
> > > > > > > > 
> > > > > > > > ---
> > > > > > > > 
> > > > > > > >  drivers/block/zram/zram_drv.c | 25 +++++++++++++------------
> > > > > > > >  1 file changed, 13 insertions(+), 12 deletions(-)
> > > > > > > > 
> > > > > > > > diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> > > > > > > > index 9250b3f..827ab21 100644
> > > > > > > > --- a/drivers/block/zram/zram_drv.c
> > > > > > > > +++ b/drivers/block/zram/zram_drv.c
> > > > > > > > @@ -765,9 +765,18 @@ static ssize_t disksize_store(struct device *dev,
> > > > > > > >  		return -EINVAL;
> > > > > > > >  
> > > > > > > >  	disksize = PAGE_ALIGN(disksize);
> > > > > > > > +	down_write(&zram->init_lock);
> > > > > > > > +	if (init_done(zram)) {
> > > > > > > > +		up_write(&zram->init_lock);
> > > > > > > > +		pr_info("Cannot change disksize for initialized device\n");
> > > > > > > > +		return -EBUSY;
> > > > > > > > +	}
> > > > > > > > +
> > > > > > > >  	meta = zram_meta_alloc(zram->disk->first_minor, disksize);
> > > > > > > > -	if (!meta)
> > > > > > > > -		return -ENOMEM;
> > > > > > > > +	if (!meta) {
> > > > > > > > +		err = -ENOMEM;
> > > > > > > > +		goto out_unlock;
> > > > > > > > +	}
> > > > > > > >  
> > > > > > > >  	comp = zcomp_create(zram->compressor, zram->max_comp_streams);
> > > > > > > >  	if (IS_ERR(comp)) {
> > > > > > > > @@ -777,13 +786,6 @@ static ssize_t disksize_store(struct device *dev,
> > > > > > > >  		goto out_free_meta;
> > > > > > > >  	}
> > > > > > > >  
> > > > > > > > -	down_write(&zram->init_lock);
> > > > > > > > -	if (init_done(zram)) {
> > > > > > > > -		pr_info("Cannot change disksize for initialized device\n");
> > > > > > > > -		err = -EBUSY;
> > > > > > > > -		goto out_destroy_comp;
> > > > > > > > -	}
> > > > > > > > -
> > > > > > > >  	zram->meta = meta;
> > > > > > > >  	zram->comp = comp;
> > > > > > > >  	zram->disksize = disksize;
> > > > > > > > @@ -799,11 +801,10 @@ static ssize_t disksize_store(struct device *dev,
> > > > > > > >  
> > > > > > > >  	return len;
> > > > > > > >  
> > > > > > > > -out_destroy_comp:
> > > > > > > > -	up_write(&zram->init_lock);
> > > > > > > > -	zcomp_destroy(comp);
> > > > > > > >  out_free_meta:
> > > > > > > >  	zram_meta_free(meta);
> > > > > > > > +out_unlock:
> > > > > > > > +	up_write(&zram->init_lock);
> > > > > > > >  	return err;
> > > > > > > >  }
> > > > > > > >  
> > > > > > > 
> > > > > > > The init_lock is really troublesome. We can't do call zram_meta_alloc
> > > > > > > under init_lock due to lockdep report. Please keep in mind.
> > > > > > >
> > > > > > 
> > > > > > ah... I do recall it, thanks for your reminder.
> > > > > > 
> > > > > > 
> > > > > > > The zram_rw_page is one of the function under reclaim path and hold it
> > > > > > > as read_lock while here holds it as write_lock.
> > > > > > > It's a false positive so that we might could make shut lockdep up
> > > > > > > by annotation but I don't want it but want to work with lockdep rather
> > > > > > > than disable. As well, there are other pathes to use init_lock to
> > > > > > > protect other data where would be victims of lockdep.
> > > > > > > 
> > > > > > > I didn't tell the motivation of this patch because it made you busy
> > > > > > > guys wasted. Let me tell it now. It was another lockdep report by
> > > > > > > kmem_cache_destroy for zsmalloc compaction about init_lock. That's why
> > > > > > > the patchset was one of the patch in compaction.
> > > > > > >
> > > > > > > Yes, the ideal is to remove horrible init_lock of zram in this phase and
> > > > > > > make code more simple and clear but I don't want to stuck zsmalloc
> > > > > > > compaction by the work.
> > > > > > 
> > > > > > 
> > > > > > > Having said that, I feel it's time to revisit
> > > > > > > to remove init_lock.
> > > > > > > At least, I will think over to find a solution to kill init_lock.
> > > > > > 
> > > > > > hm, can't think of anything quick...
> > > > > > 
> > > > > > 	-ss
> > > > > 
> > > > > Hello guys,
> > > > > 
> > > > > How about this?
> > > > > 
> > > > > It's based on Ganesh's patch.
> > > > > https://lkml.org/lkml/2015/1/24/50
> > > > (I see no similarities with Ganesh's patch)
> > > > 
> > > > hm, you probably meant this one https://lkml.org/lkml/2015/1/23/406
> > > > 
> > > > 
> > > > at glance this makes things a bit more complicated, so I need to think more.
> > > > 
> > > > > From afda9fd2f6c40dd0745d8a6babe78c5cbdceddf5 Mon Sep 17 00:00:00 2001
> > > > > From: Minchan Kim <minchan@kernel.org>
> > > > > Date: Mon, 26 Jan 2015 14:34:10 +0900
> > > > > Subject: [RFC] zram: remove init_lock in zram_make_request
> > > > > 
> > > > > Admin could reset zram during I/O operation going on so we have
> > > > > used zram->init_lock as read-side lock in I/O path to prevent
> > > > > sudden zram meta freeing.
> > > > > 
> > > > > However, the init_lock is really troublesome.
> > > > > We can't do call zram_meta_alloc under init_lock due to lockdep splat
> > > > > because zram_rw_page is one of the function under reclaim path and
> > > > > hold it as read_lock while other places in process context hold it
> > > > > as write_lock. So, we have used allocation out of the lock to avoid
> > > > > lockdep warn but it's not good for readability and fainally, I met
> > > > > another lockdep splat between init_lock and cpu_hotpulug from
> > > > > kmem_cache_destroy during wokring zsmalloc compaction. :(
> > > > > 
> > > > > Yes, the ideal is to remove horrible init_lock of zram in rw path.
> > > > > This patch removes it in rw path and instead, put init_done bool
> > > > > variable to check initialization done with smp_[wmb|rmb] and
> > > > > srcu_[un]read_lock to prevent sudden zram meta freeing
> > > > > during I/O operation.
> > > > > 
> > > > > Signed-off-by: Minchan Kim <minchan@kernel.org>
> > > > > ---
> > > > >  drivers/block/zram/zram_drv.c | 76 +++++++++++++++++++++++++++++--------------
> > > > >  drivers/block/zram/zram_drv.h |  5 +++
> > > > >  2 files changed, 57 insertions(+), 24 deletions(-)
> > > > > 
> > > > > diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
> > > > > index a598ada817f0..e06ff975f997 100644
> > > > > --- a/drivers/block/zram/zram_drv.c
> > > > > +++ b/drivers/block/zram/zram_drv.c
> > > > > @@ -32,6 +32,7 @@
> > > > >  #include <linux/string.h>
> > > > >  #include <linux/vmalloc.h>
> > > > >  #include <linux/err.h>
> > > > > +#include <linux/srcu.h>
> > > > >  
> > > > >  #include "zram_drv.h"
> > > > >  
> > > > > @@ -53,9 +54,16 @@ static ssize_t name##_show(struct device *d,		\
> > > > >  }									\
> > > > >  static DEVICE_ATTR_RO(name);
> > > > >  
> > > > > -static inline int init_done(struct zram *zram)
> > > > > +static inline bool init_done(struct zram *zram)
> > > > >  {
> > > > > -	return zram->meta != NULL;
> > > > > +	/*
> > > > > +	 * init_done can be used without holding zram->init_lock in
> > > > > +	 * read/write handler(ie, zram_make_request) but we should make sure
> > > > > +	 * that zram->init_done should set up after meta initialization is
> > > > > +	 * done. Look at disksize_store.
> > > > > +	 */
> > > > > +	smp_rmb();
> > > > > +	return zram->init_done;
> > > > 
> > > > ->init_done returns back :)
> > > 
> > > 
> > > > can we rely on write ->meta; wmb; --- rmb; read ->meta?
> > > 
> > > Might be possible.
> 
> Now that I think about it, it's impossible with zram->meta because
> we need to nullify it before call_srcu but pre-existing SRCU read-side
> critical sections can access zram->meta.
> Anyway, introducing a new variable should be not a party-pooper.
> 
> > > 
> > > > 
> > > > how much performance do we lose on barriers?
> > > 
> > > I think it's not too much than locking which does more than(ie,
> > > barrier, fairness, spin on owner and so on) such simple barrier.
> > > 
> > > > 
> > > > >  }
> > > > >  
> > > > >  static inline struct zram *dev_to_zram(struct device *dev)
> > > > > @@ -326,6 +334,10 @@ static void zram_meta_free(struct zram_meta *meta)
> > > > >  	kfree(meta);
> > > > >  }
> > > > >  
> > > > > +static void rcu_zram_do_nothing(struct rcu_head *unused)
> > > > > +{
> > > > > +}
> > > > > +
> > > > >  static struct zram_meta *zram_meta_alloc(int device_id, u64 disksize)
> > > > >  {
> > > > >  	char pool_name[8];
> > > > > @@ -726,11 +738,8 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > > > >  		return;
> > > > >  	}
> > > > >  
> > > > > -	zcomp_destroy(zram->comp);
> > > > >  	zram->max_comp_streams = 1;
> > > > >  
> > > > > -	zram_meta_free(zram->meta);
> > > > > -	zram->meta = NULL;
> > > > >  	/* Reset stats */
> > > > >  	memset(&zram->stats, 0, sizeof(zram->stats));
> > > > >  
> > > > > @@ -738,8 +747,12 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
> > > > >  	if (reset_capacity)
> > > > >  		set_capacity(zram->disk, 0);
> > > > >  
> > > > > +	zram->init_done = false;
> > > > 
> > > > missing wmb?
> > > 
> > > I thouht about it but when I read comment from call_srcu as follows
> > > "each cpu is guaranteed to have executed a full memory barrier",
> > > I decided we don't need it. Right? (ie, double check)
> > > 
> > 
> > hm, need to think about it.
> 
> Another idea is to use kick_all_cpus_sync, not srcu.
> With that, we don't need to add more instruction in rw path.
> I will try it.

>From 560478040d2e08c61796e67d0c3ee519ae67ac0f Mon Sep 17 00:00:00 2001
From: Minchan Kim <minchan@kernel.org>
Date: Mon, 26 Jan 2015 14:34:10 +0900
Subject: [PATCH] zram: remove init_lock in zram_make_request

Admin could reset zram during I/O operation going on so we have
used zram->init_lock as read-side lock in I/O path to prevent
sudden zram meta freeing.

However, the init_lock is really troublesome.
We can't do call zram_meta_alloc under init_lock due to lockdep splat
because zram_rw_page is one of the function under reclaim path and
hold it as read_lock while other places in process context hold it
as write_lock. So, we have used allocation out of the lock to avoid
lockdep warn but it's not good for readability and finally, I met
another lockdep splat between init_lock and cpu_hotpulug from
kmem_cache_destroy during wokring zsmalloc compaction. :(

Yes, the ideal is to remove horrible init_lock of zram in rw path.
This patch removes it in rw path and instead, use kick_all_cpus_sync
and a bool init_done variable to check initialization done with
smp_[wmb|rmb].

Upon kick_all_cpus_sync returns, any CPU cannot access zram meta
any more due to init_done in zram_make_request so it's safe to
free meta. So, finally, we avoids init_lock in reclaim context
so we are free for deadlock.

Signed-off-by: Minchan Kim <minchan@kernel.org>
---
 drivers/block/zram/zram_drv.c | 70 +++++++++++++++++++++++++------------------
 drivers/block/zram/zram_drv.h |  2 ++
 2 files changed, 43 insertions(+), 29 deletions(-)

diff --git a/drivers/block/zram/zram_drv.c b/drivers/block/zram/zram_drv.c
index a598ada817f0..404602b1932e 100644
--- a/drivers/block/zram/zram_drv.c
+++ b/drivers/block/zram/zram_drv.c
@@ -53,9 +53,16 @@ static ssize_t name##_show(struct device *d,		\
 }									\
 static DEVICE_ATTR_RO(name);
 
-static inline int init_done(struct zram *zram)
+static inline bool init_done(struct zram *zram)
 {
-	return zram->meta != NULL;
+	/*
+	 * init_done can be used without holding zram->init_lock in
+	 * read/write handler(ie, zram_make_request) but we should make sure
+	 * that zram->init_done should set up after meta initialization is
+	 * done. Look at disksize_store.
+	 */
+	smp_rmb();
+	return zram->init_done;
 }
 
 static inline struct zram *dev_to_zram(struct device *dev)
@@ -726,11 +733,8 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
 		return;
 	}
 
-	zcomp_destroy(zram->comp);
 	zram->max_comp_streams = 1;
 
-	zram_meta_free(zram->meta);
-	zram->meta = NULL;
 	/* Reset stats */
 	memset(&zram->stats, 0, sizeof(zram->stats));
 
@@ -738,8 +742,16 @@ static void zram_reset_device(struct zram *zram, bool reset_capacity)
 	if (reset_capacity)
 		set_capacity(zram->disk, 0);
 
+	zram->init_done = false;
+	/* don't need smp_wmb because kick_all_cpus_sync does */
+	kick_all_cpus_sync();
+	/*
+	 * From now on, any read/write cannot access zram meta data
+	 * by init_done in the handler.
+	 */
+	zram_meta_free(zram->meta);
+	zcomp_destroy(zram->comp);
 	up_write(&zram->init_lock);
-
 	/*
 	 * Revalidate disk out of the init_lock to avoid lockdep splat.
 	 * It's okay because disk's capacity is protected by init_lock
@@ -762,10 +774,19 @@ static ssize_t disksize_store(struct device *dev,
 	if (!disksize)
 		return -EINVAL;
 
+	down_write(&zram->init_lock);
+	if (init_done(zram)) {
+		pr_info("Cannot change disksize for initialized device\n");
+		up_write(&zram->init_lock);
+		return -EBUSY;
+	}
+
 	disksize = PAGE_ALIGN(disksize);
 	meta = zram_meta_alloc(zram->disk->first_minor, disksize);
-	if (!meta)
+	if (!meta) {
+		up_write(&zram->init_lock);
 		return -ENOMEM;
+	}
 
 	comp = zcomp_create(zram->compressor, zram->max_comp_streams);
 	if (IS_ERR(comp)) {
@@ -775,17 +796,17 @@ static ssize_t disksize_store(struct device *dev,
 		goto out_free_meta;
 	}
 
-	down_write(&zram->init_lock);
-	if (init_done(zram)) {
-		pr_info("Cannot change disksize for initialized device\n");
-		err = -EBUSY;
-		goto out_destroy_comp;
-	}
-
 	zram->meta = meta;
 	zram->comp = comp;
 	zram->disksize = disksize;
 	set_capacity(zram->disk, zram->disksize >> SECTOR_SHIFT);
+	/*
+	 * Store operation of struct zram fields should complete
+	 * before init_done set up because zram_bvec_rw doesn't
+	 * hold an zram->init_lock.
+	 */
+	smp_wmb();
+	zram->init_done = true;
 	up_write(&zram->init_lock);
 
 	/*
@@ -797,10 +818,8 @@ static ssize_t disksize_store(struct device *dev,
 
 	return len;
 
-out_destroy_comp:
-	up_write(&zram->init_lock);
-	zcomp_destroy(comp);
 out_free_meta:
+	up_write(&zram->init_lock);
 	zram_meta_free(meta);
 	return err;
 }
@@ -907,7 +926,6 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 {
 	struct zram *zram = queue->queuedata;
 
-	down_read(&zram->init_lock);
 	if (unlikely(!init_done(zram)))
 		goto error;
 
@@ -918,12 +936,10 @@ static void zram_make_request(struct request_queue *queue, struct bio *bio)
 	}
 
 	__zram_make_request(zram, bio);
-	up_read(&zram->init_lock);
 
 	return;
 
 error:
-	up_read(&zram->init_lock);
 	bio_io_error(bio);
 }
 
@@ -951,17 +967,16 @@ static int zram_rw_page(struct block_device *bdev, sector_t sector,
 	struct bio_vec bv;
 
 	zram = bdev->bd_disk->private_data;
+
+	/* This should be another patch */
+	if (unlikely(!init_done(zram)))
+		return -EIO;
+
 	if (!valid_io_request(zram, sector, PAGE_SIZE)) {
 		atomic64_inc(&zram->stats.invalid_io);
 		return -EINVAL;
 	}
 
-	down_read(&zram->init_lock);
-	if (unlikely(!init_done(zram))) {
-		err = -EIO;
-		goto out_unlock;
-	}
-
 	index = sector >> SECTORS_PER_PAGE_SHIFT;
 	offset = sector & (SECTORS_PER_PAGE - 1) << SECTOR_SHIFT;
 
@@ -970,8 +985,6 @@ static int zram_rw_page(struct block_device *bdev, sector_t sector,
 	bv.bv_offset = 0;
 
 	err = zram_bvec_rw(zram, &bv, index, offset, rw);
-out_unlock:
-	up_read(&zram->init_lock);
 	/*
 	 * If I/O fails, just return error(ie, non-zero) without
 	 * calling page_endio.
@@ -1125,7 +1138,6 @@ static void destroy_device(struct zram *zram)
 
 	del_gendisk(zram->disk);
 	put_disk(zram->disk);
-
 	blk_cleanup_queue(zram->queue);
 }
 
diff --git a/drivers/block/zram/zram_drv.h b/drivers/block/zram/zram_drv.h
index e492f6bf11f1..dca265654285 100644
--- a/drivers/block/zram/zram_drv.h
+++ b/drivers/block/zram/zram_drv.h
@@ -107,6 +107,8 @@ struct zram {
 
 	/* Prevent concurrent execution of device init, reset and R/W request */
 	struct rw_semaphore init_lock;
+	bool init_done;
+
 	/*
 	 * This is the limit on amount of *uncompressed* worth of data
 	 * we can store in a disk.
-- 
1.9.1


-- 
Kind regards,
Minchan Kim

  reply	other threads:[~2015-01-28  0:22 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-23  5:58 Minchan Kim
2015-01-23  5:58 ` [PATCH 2/2] zram: protect zram->stat race with init_lock Minchan Kim
2015-01-23 13:45   ` Jerome Marchand
2015-01-23 14:38   ` Sergey Senozhatsky
2015-01-24 13:17     ` Ganesh Mahendran
2015-01-25 14:38       ` Sergey Senozhatsky
2015-01-23 13:07 ` [PATCH 1/2] zram: free meta out of init_lock Jerome Marchand
2015-01-23 14:24 ` Sergey Senozhatsky
2015-01-23 14:48   ` Jerome Marchand
2015-01-23 15:47     ` Sergey Senozhatsky
2015-01-26  1:33       ` Minchan Kim
2015-01-26 14:17         ` Sergey Senozhatsky
2015-01-26 16:00           ` Minchan Kim
2015-01-27  2:17             ` Sergey Senozhatsky
2015-01-27  3:18               ` Minchan Kim
2015-01-27  4:03                 ` Sergey Senozhatsky
2015-01-28  0:15                   ` Minchan Kim
2015-01-28  0:22                     ` Minchan Kim [this message]
2015-01-28  2:07                       ` Sergey Senozhatsky
2015-01-28  2:57                         ` Minchan Kim
2015-01-28  3:53                           ` Sergey Senozhatsky
2015-01-28  4:07                             ` Sergey Senozhatsky
2015-01-28  4:50                               ` Sergey Senozhatsky
2015-01-28  4:58                                 ` Minchan Kim
2015-01-28  5:35                                   ` Minchan Kim
2015-01-28  6:08                                     ` Sergey Senozhatsky
2015-01-28  6:10                                       ` Sergey Senozhatsky
2015-01-28  4:55                             ` Minchan Kim
2015-01-28  0:24                     ` Sergey Senozhatsky
2015-01-28  0:59                       ` Minchan Kim
2015-01-26 14:34         ` Jerome Marchand
2015-01-26 15:52           ` Minchan Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150128002203.GB25828@blaptop \
    --to=minchan@kernel.org \
    --cc=akpm@linux-foundation.org \
    --cc=jmarchan@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mm@kvack.org \
    --cc=ngupta@vflare.org \
    --cc=sergey.senozhatsky.work@gmail.com \
    --cc=sergey.senozhatsky@gmail.com \
    --subject='Re: [PATCH 1/2] zram: free meta out of init_lock' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).