LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
* [PATCH 3.18 00/61] 3.18.5-stable review
@ 2015-01-28  1:26 Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 01/61] can: dev: fix crtlmode_supported check Greg Kroah-Hartman
                   ` (62 more replies)
  0 siblings, 63 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, torvalds, akpm, linux, satoru.takeuchi,
	shuah.kh, stable

This is the start of the stable review cycle for the 3.18.5 release.
There are 61 patches in this series, all will be posted as a response
to this one.  If anyone has any issues with these being applied, please
let me know.

Responses should be made by Fri Jan 30 01:26:13 UTC 2015.
Anything received after that time might be too late.

The whole patch series can be found in one patch at:
	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.18.5-rc1.gz
and the diffstat can be found below.

thanks,

greg k-h

-------------
Pseudo-Shortlog of commits:

Greg Kroah-Hartman <gregkh@linuxfoundation.org>
    Linux 3.18.5-rc1

Mathias Krause <minipli@googlemail.com>
    crypto: add missing crypto module aliases

Kees Cook <keescook@chromium.org>
    crypto: include crypto- module prefix in template

Kees Cook <keescook@chromium.org>
    crypto: prefix module autoloading with "crypto-"

Rafael J. Wysocki <rafael.j.wysocki@intel.com>
    ACPI / PM: Do not disable wakeup GPEs that have not been enabled

David Spinadel <david.spinadel@intel.com>
    iwlwifi: mvm: add a flag to enable match found notification

David Vrabel <david.vrabel@citrix.com>
    Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"

Dan Carpenter <dan.carpenter@oracle.com>
    ipvs: uninitialized data with IP_VS_IPV6

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: conntrack: fix race between confirmation and flush

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nfnetlink: relax strict multicast group check from netlink_bind

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nf_tables: fix flush ruleset chain dependencies

Pablo Neira Ayuso <pablo@netfilter.org>
    netfilter: nfnetlink: validate nfnetlink header from batch

Michal Hocko <mhocko@suse.cz>
    mm: get rid of radix tree gfp mask for pagecache_get_page

Sasha Levin <sasha.levin@oracle.com>
    KEYS: close race between key lookup and freeing

Suman Tripathi <stripathi@apm.com>
    ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.

Andy Shevchenko <andriy.shevchenko@linux.intel.com>
    sata_dwc_460ex: fix resource leak on error path

Bryan O'Donoghue <pure.logic@nexus-software.ie>
    x86/apic: Re-enable PCI_MSI support for non-SMP X86_32

Andy Lutomirski <luto@amacapital.net>
    x86, tls: Interpret an all-zero struct user_desc as "no segment"

Andy Lutomirski <luto@amacapital.net>
    x86, tls, ldt: Stop checking lm in LDT_empty

Nadav Amit <nadav.amit@gmail.com>
    KVM: x86: Fix of previously incomplete fix for CVE-2014-8480

Nadav Amit <namit@cs.technion.ac.il>
    KVM: x86: SYSENTER emulation is broken

Kees Cook <keescook@chromium.org>
    x86, boot: Skip relocs when load address unchanged

Alexandre Demers <alexandre.f.demers@gmail.com>
    x86/tsc: Change Fast TSC calibration failed from error to info

K. Y. Srinivasan <kys@microsoft.com>
    x86, hyperv: Mark the Hyper-V clocksource as being continuous

Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
    clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write

Jan Beulich <JBeulich@suse.com>
    x86, irq: Properly tag virtualization entry in /proc/interrupts

Gavin Li <git@thegavinli.com>
    irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type

Al Viro <viro@zeniv.linux.org.uk>
    fix deadlock in cifs_ioctl_clone()

Andrew Lunn <andrew@lunn.ch>
    bus: mvebu-mbus: fix support of MBus window 13

Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
    ARM: mvebu: completely disable hardware I/O coherency

Fabio Estevam <fabio.estevam@freescale.com>
    ARM: dts: imx25: Fix PWM "per" clocks

Sasha Levin <sasha.levin@oracle.com>
    time: adjtimex: Validate the ADJ_FREQUENCY values

Sasha Levin <sasha.levin@oracle.com>
    time: settimeofday: Validate the values of tv from user

Felipe Balbi <balbi@ti.com>
    irqchip: omap-intc: Fix legacy DMA regression

Joe Thornber <ejt@redhat.com>
    dm cache: fix problematic dual use of a single migration count variable

Joe Thornber <ejt@redhat.com>
    dm cache: share cache-metadata object across inactive and active DM tables

Hans Verkuil <hans.verkuil@cisco.com>
    vb2: fix vb2_thread_stop race conditions

Matthias Schwarzott <zzam@gentoo.org>
    cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry

Brian King <brking@linux.vnet.ibm.com>
    ipr: wait for aborted command responses

Alex Williamson <alex.williamson@redhat.com>
    PCI: Mark Atheros AR93xx to avoid bus reset

Alex Williamson <alex.williamson@redhat.com>
    PCI: Add flag for devices where we can't use bus reset

Yinghai Lu <yinghai@kernel.org>
    x86/PCI: Clip bridge windows to fit in upstream windows

Yinghai Lu <yinghai@kernel.org>
    PCI: Add pci_bus_clip_resource() to clip to fit upstream window

Yinghai Lu <yinghai@kernel.org>
    PCI: Add pci_claim_bridge_resource() to clip window if necessary

Yinghai Lu <yinghai@kernel.org>
    PCI: Pass bridge device, not bus, when updating bridge windows

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: use rv515_ring_start on r5xx

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add si dpm quirk list

Alex Deucher <alexander.deucher@amd.com>
    drm/radeon: add a dpm quirk list

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES

Chris Wilson <chris@chris-wilson.co.uk>
    drm/i915: Ban Haswell from using RCS flips

Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
    scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore

Tejun Heo <tj@kernel.org>
    workqueue: fix subtle pool management issue which can stall whole worker_pool

Jason Lee Cragg <jcragg@gmail.com>
    ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210

David Jeffery <djeffery@redhat.com>
    libata: prevent HSM state change race between ISR and PIO

Dan Williams <dan.j.williams@intel.com>
    libata: allow sata_sil24 to opt-out of tag ordered submission

Roger Tseng <rogerable@realtek.com>
    mfd: rtsx_usb: Fix runtime PM deadlock

Felipe Balbi <balbi@ti.com>
    mfd: tps65218: Make INT1 our status_base register

Felipe Balbi <balbi@ti.com>
    mfd: tps65218: Make INT[12] and STATUS registers volatile

Jim Lin <jilin@nvidia.com>
    pinctrl: Fix two deadlocks

Stephen Boyd <sboyd@codeaurora.org>
    pinctrl: qcom: Don't iterate past end of function array

Oliver Hartkopp <socketcan@hartkopp.net>
    can: m_can: tag current CAN FD controllers as non-ISO

Oliver Hartkopp <socketcan@hartkopp.net>
    can: dev: fix crtlmode_supported check


-------------

Diffstat:

 Makefile                                       |   4 +-
 arch/arm/boot/dts/imx25.dtsi                   |   8 +-
 arch/arm/crypto/aes_glue.c                     |   4 +-
 arch/arm/crypto/sha1_glue.c                    |   2 +-
 arch/arm/crypto/sha1_neon_glue.c               |   2 +-
 arch/arm/crypto/sha512_neon_glue.c             |   4 +-
 arch/arm/mach-mvebu/coherency.c                |   7 +-
 arch/arm64/crypto/aes-ce-ccm-glue.c            |   2 +-
 arch/arm64/crypto/aes-glue.c                   |   8 +-
 arch/powerpc/crypto/sha1.c                     |   3 +-
 arch/s390/crypto/aes_s390.c                    |   2 +-
 arch/s390/crypto/des_s390.c                    |   4 +-
 arch/s390/crypto/ghash_s390.c                  |   2 +-
 arch/s390/crypto/sha1_s390.c                   |   2 +-
 arch/s390/crypto/sha256_s390.c                 |   4 +-
 arch/s390/crypto/sha512_s390.c                 |   4 +-
 arch/sparc/crypto/aes_glue.c                   |   2 +-
 arch/sparc/crypto/camellia_glue.c              |   2 +-
 arch/sparc/crypto/crc32c_glue.c                |   2 +-
 arch/sparc/crypto/des_glue.c                   |   2 +-
 arch/sparc/crypto/md5_glue.c                   |   2 +-
 arch/sparc/crypto/sha1_glue.c                  |   2 +-
 arch/sparc/crypto/sha256_glue.c                |   4 +-
 arch/sparc/crypto/sha512_glue.c                |   4 +-
 arch/x86/Kconfig                               |   6 +-
 arch/x86/boot/compressed/misc.c                |   9 ++-
 arch/x86/crypto/aes_glue.c                     |   4 +-
 arch/x86/crypto/aesni-intel_glue.c             |   2 +-
 arch/x86/crypto/blowfish_glue.c                |   4 +-
 arch/x86/crypto/camellia_aesni_avx2_glue.c     |   4 +-
 arch/x86/crypto/camellia_aesni_avx_glue.c      |   4 +-
 arch/x86/crypto/camellia_glue.c                |   4 +-
 arch/x86/crypto/cast5_avx_glue.c               |   2 +-
 arch/x86/crypto/cast6_avx_glue.c               |   2 +-
 arch/x86/crypto/crc32-pclmul_glue.c            |   4 +-
 arch/x86/crypto/crc32c-intel_glue.c            |   4 +-
 arch/x86/crypto/crct10dif-pclmul_glue.c        |   4 +-
 arch/x86/crypto/des3_ede_glue.c                |   8 +-
 arch/x86/crypto/fpu.c                          |   3 +
 arch/x86/crypto/ghash-clmulni-intel_glue.c     |   2 +-
 arch/x86/crypto/salsa20_glue.c                 |   4 +-
 arch/x86/crypto/serpent_avx2_glue.c            |   4 +-
 arch/x86/crypto/serpent_avx_glue.c             |   2 +-
 arch/x86/crypto/serpent_sse2_glue.c            |   2 +-
 arch/x86/crypto/sha-mb/sha1_mb.c               |   2 +-
 arch/x86/crypto/sha1_ssse3_glue.c              |   2 +-
 arch/x86/crypto/sha256_ssse3_glue.c            |   4 +-
 arch/x86/crypto/sha512_ssse3_glue.c            |   4 +-
 arch/x86/crypto/twofish_avx_glue.c             |   2 +-
 arch/x86/crypto/twofish_glue.c                 |   4 +-
 arch/x86/crypto/twofish_glue_3way.c            |   4 +-
 arch/x86/include/asm/desc.h                    |  20 +++--
 arch/x86/kernel/cpu/mshyperv.c                 |   1 +
 arch/x86/kernel/irq.c                          |   2 +-
 arch/x86/kernel/tls.c                          |  25 +++++-
 arch/x86/kernel/tsc.c                          |   2 +-
 arch/x86/kvm/emulate.c                         |  31 +++-----
 arch/x86/pci/i386.c                            |   2 +-
 crypto/842.c                                   |   1 +
 crypto/aes_generic.c                           |   3 +-
 crypto/algapi.c                                |   4 +-
 crypto/ansi_cprng.c                            |   3 +-
 crypto/anubis.c                                |   1 +
 crypto/api.c                                   |   4 +-
 crypto/arc4.c                                  |   1 +
 crypto/authenc.c                               |   1 +
 crypto/authencesn.c                            |   1 +
 crypto/blowfish_generic.c                      |   3 +-
 crypto/camellia_generic.c                      |   3 +-
 crypto/cast5_generic.c                         |   3 +-
 crypto/cast6_generic.c                         |   3 +-
 crypto/cbc.c                                   |   1 +
 crypto/ccm.c                                   |   5 +-
 crypto/chainiv.c                               |   1 +
 crypto/cmac.c                                  |   1 +
 crypto/crc32.c                                 |   1 +
 crypto/crc32c_generic.c                        |   3 +-
 crypto/crct10dif_generic.c                     |   3 +-
 crypto/cryptd.c                                |   1 +
 crypto/crypto_null.c                           |   6 +-
 crypto/ctr.c                                   |   3 +-
 crypto/cts.c                                   |   1 +
 crypto/deflate.c                               |   2 +-
 crypto/des_generic.c                           |   7 +-
 crypto/ecb.c                                   |   1 +
 crypto/eseqiv.c                                |   1 +
 crypto/fcrypt.c                                |   1 +
 crypto/gcm.c                                   |   7 +-
 crypto/ghash-generic.c                         |   3 +-
 crypto/hmac.c                                  |   1 +
 crypto/khazad.c                                |   1 +
 crypto/krng.c                                  |   3 +-
 crypto/lrw.c                                   |   1 +
 crypto/lz4.c                                   |   1 +
 crypto/lz4hc.c                                 |   1 +
 crypto/lzo.c                                   |   1 +
 crypto/mcryptd.c                               |   1 +
 crypto/md4.c                                   |   2 +-
 crypto/md5.c                                   |   1 +
 crypto/michael_mic.c                           |   1 +
 crypto/pcbc.c                                  |   1 +
 crypto/pcrypt.c                                |   1 +
 crypto/rmd128.c                                |   1 +
 crypto/rmd160.c                                |   1 +
 crypto/rmd256.c                                |   1 +
 crypto/rmd320.c                                |   1 +
 crypto/salsa20_generic.c                       |   3 +-
 crypto/seed.c                                  |   1 +
 crypto/seqiv.c                                 |   1 +
 crypto/serpent_generic.c                       |   5 +-
 crypto/sha1_generic.c                          |   3 +-
 crypto/sha256_generic.c                        |   6 +-
 crypto/sha512_generic.c                        |   6 +-
 crypto/tea.c                                   |   5 +-
 crypto/tgr192.c                                |   5 +-
 crypto/twofish_generic.c                       |   3 +-
 crypto/vmac.c                                  |   1 +
 crypto/wp512.c                                 |   5 +-
 crypto/xcbc.c                                  |   1 +
 crypto/xts.c                                   |   1 +
 crypto/zlib.c                                  |   1 +
 drivers/acpi/device_pm.c                       |  12 ++-
 drivers/ata/ahci_xgene.c                       |   2 +-
 drivers/ata/libata-core.c                      |   5 +-
 drivers/ata/libata-sff.c                       |  12 +++
 drivers/ata/sata_dwc_460ex.c                   |  26 +++----
 drivers/ata/sata_sil24.c                       |   2 +-
 drivers/bus/mvebu-mbus.c                       |  13 ++++
 drivers/clocksource/exynos_mct.c               |   4 +-
 drivers/crypto/padlock-aes.c                   |   2 +-
 drivers/crypto/padlock-sha.c                   |   8 +-
 drivers/crypto/qat/qat_common/adf_ctl_drv.c    |   3 +-
 drivers/crypto/ux500/cryp/cryp_core.c          |   4 +-
 drivers/crypto/ux500/hash/hash_core.c          |   8 +-
 drivers/gpu/drm/i915/i915_gem.c                |   2 +-
 drivers/gpu/drm/i915/intel_display.c           |   2 +-
 drivers/gpu/drm/radeon/radeon_asic.c           |  18 ++++-
 drivers/gpu/drm/radeon/radeon_pm.c             |  33 ++++++++
 drivers/gpu/drm/radeon/si_dpm.c                |  39 ++++++++++
 drivers/irqchip/irq-atmel-aic-common.c         |   4 +-
 drivers/irqchip/irq-omap-intc.c                |  26 +++++--
 drivers/md/dm-cache-metadata.c                 | 101 +++++++++++++++++++++++--
 drivers/md/dm-cache-target.c                   |  89 ++++++++++++----------
 drivers/media/pci/cx23885/cx23885-cards.c      |  23 ++++--
 drivers/media/pci/cx23885/cx23885-dvb.c        |  11 +++
 drivers/media/pci/cx23885/cx23885.h            |   1 +
 drivers/media/v4l2-core/videobuf2-core.c       |  19 +++--
 drivers/mfd/rtsx_usb.c                         |  12 ---
 drivers/mfd/tps65218.c                         |  12 +++
 drivers/net/can/dev.c                          |   8 +-
 drivers/net/can/m_can/m_can.c                  |   5 ++
 drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h |   2 +
 drivers/net/wireless/iwlwifi/mvm/scan.c        |   1 +
 drivers/pci/bus.c                              |  43 +++++++++++
 drivers/pci/pci.c                              |  40 +++++++++-
 drivers/pci/pci.h                              |   1 +
 drivers/pci/quirks.c                           |  14 ++++
 drivers/pci/setup-bus.c                        |  56 +++++++++++---
 drivers/pinctrl/core.c                         |   5 +-
 drivers/pinctrl/qcom/pinctrl-msm.c             |   4 +-
 drivers/s390/crypto/ap_bus.c                   |   3 +-
 drivers/scsi/ipr.c                             |  92 ++++++++++++++++++++++
 drivers/scsi/ipr.h                             |   1 +
 drivers/xen/swiotlb-xen.c                      |   2 +-
 fs/cifs/ioctl.c                                |  21 ++---
 include/acpi/acpi_bus.h                        |   1 +
 include/linux/crypto.h                         |  13 ++++
 include/linux/libata.h                         |   1 +
 include/linux/pagemap.h                        |  13 ++--
 include/linux/pci.h                            |   3 +
 include/linux/time.h                           |  13 ++++
 include/uapi/linux/can/netlink.h               |   1 +
 kernel/time/ntp.c                              |   7 ++
 kernel/time/time.c                             |   4 +
 kernel/workqueue.c                             |  25 ++----
 mm/filemap.c                                   |  29 +++----
 net/netfilter/ipvs/ip_vs_ftp.c                 |  10 +--
 net/netfilter/nf_conntrack_core.c              |  20 +++--
 net/netfilter/nf_tables_api.c                  |  14 ++--
 net/netfilter/nfnetlink.c                      |   5 +-
 scripts/recordmcount.pl                        |   1 -
 security/keys/gc.c                             |   4 +-
 sound/usb/mixer.c                              |   1 +
 183 files changed, 987 insertions(+), 380 deletions(-)



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 01/61] can: dev: fix crtlmode_supported check
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 02/61] can: m_can: tag current CAN FD controllers as non-ISO Greg Kroah-Hartman
                   ` (61 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Wolfgang Grandegger, Oliver Hartkopp,
	Marc Kleine-Budde

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 9b1087aa5e86448fe6ad40a58964e35f3ba423d5 upstream.

When changing flags in the CAN drivers ctrlmode the provided new content has to
be checked whether the bits are allowed to be changed. The bits that are to be
changed are given as a bitfield in cm->mask. Therefore checking against
cm->flags is wrong as the content can hold any kind of values.

The iproute2 tool sets the bits in cm->mask and cm->flags depending on the
detected command line options. To be robust against bogus user space
applications additionally sanitize the provided flags with the provided mask.

Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/dev.c |    8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/net/can/dev.c
+++ b/drivers/net/can/dev.c
@@ -729,10 +729,14 @@ static int can_changelink(struct net_dev
 		if (dev->flags & IFF_UP)
 			return -EBUSY;
 		cm = nla_data(data[IFLA_CAN_CTRLMODE]);
-		if (cm->flags & ~priv->ctrlmode_supported)
+
+		/* check whether changed bits are allowed to be modified */
+		if (cm->mask & ~priv->ctrlmode_supported)
 			return -EOPNOTSUPP;
+
+		/* clear bits to be modified and copy the flag values */
 		priv->ctrlmode &= ~cm->mask;
-		priv->ctrlmode |= cm->flags;
+		priv->ctrlmode |= (cm->flags & cm->mask);
 
 		/* CAN_CTRLMODE_FD can only be set when driver supports FD */
 		if (priv->ctrlmode & CAN_CTRLMODE_FD)



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 02/61] can: m_can: tag current CAN FD controllers as non-ISO
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 01/61] can: dev: fix crtlmode_supported check Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 03/61] pinctrl: qcom: Dont iterate past end of function array Greg Kroah-Hartman
                   ` (60 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Oliver Hartkopp, Marc Kleine-Budde

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Oliver Hartkopp <socketcan@hartkopp.net>

commit 6cfda7fbebe8a4fd33ea5722fa0212f98f643c35 upstream.

During the CAN FD standardization process within the ISO it turned out that
the failure detection capability has to be improved.

The CAN in Automation organization (CiA) defined the already implemented CAN
FD controllers as 'non-ISO' and the upcoming improved CAN FD controllers as
'ISO' compliant. See at http://www.can-cia.com/index.php?id=1937

Finally there will be three types of CAN FD controllers in the future:

1. ISO compliant (fixed)
2. non-ISO compliant (fixed, like the M_CAN IP v3.0.1 in m_can.c)
3. ISO/non-ISO CAN FD controllers (switchable, like the PEAK USB FD)

So the current M_CAN driver for the M_CAN IP v3.0.1 has to expose its non-ISO
implementation by setting the CAN_CTRLMODE_FD_NON_ISO ctrlmode at startup.
As this bit cannot be switched at configuration time CAN_CTRLMODE_FD_NON_ISO
must not be set in ctrlmode_supported of the current M_CAN driver.

Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/net/can/m_can/m_can.c    |    5 +++++
 include/uapi/linux/can/netlink.h |    1 +
 2 files changed, 6 insertions(+)

--- a/drivers/net/can/m_can/m_can.c
+++ b/drivers/net/can/m_can/m_can.c
@@ -955,6 +955,11 @@ static struct net_device *alloc_m_can_de
 	priv->can.data_bittiming_const = &m_can_data_bittiming_const;
 	priv->can.do_set_mode = m_can_set_mode;
 	priv->can.do_get_berr_counter = m_can_get_berr_counter;
+
+	/* CAN_CTRLMODE_FD_NON_ISO is fixed with M_CAN IP v3.0.1 */
+	priv->can.ctrlmode = CAN_CTRLMODE_FD_NON_ISO;
+
+	/* CAN_CTRLMODE_FD_NON_ISO can not be changed with M_CAN IP v3.0.1 */
 	priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
 					CAN_CTRLMODE_LISTENONLY |
 					CAN_CTRLMODE_BERR_REPORTING |
--- a/include/uapi/linux/can/netlink.h
+++ b/include/uapi/linux/can/netlink.h
@@ -98,6 +98,7 @@ struct can_ctrlmode {
 #define CAN_CTRLMODE_BERR_REPORTING	0x10	/* Bus-error reporting */
 #define CAN_CTRLMODE_FD			0x20	/* CAN FD mode */
 #define CAN_CTRLMODE_PRESUME_ACK	0x40	/* Ignore missing CAN ACKs */
+#define CAN_CTRLMODE_FD_NON_ISO		0x80	/* CAN FD in non-ISO mode */
 
 /*
  * CAN device statistics



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 03/61] pinctrl: qcom: Dont iterate past end of function array
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 01/61] can: dev: fix crtlmode_supported check Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 02/61] can: m_can: tag current CAN FD controllers as non-ISO Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 04/61] pinctrl: Fix two deadlocks Greg Kroah-Hartman
                   ` (59 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Timur Tabi, Pramod Gurav,
	Bjorn Andersson, Ivan T. Ivanov, Andy Gross, Stephen Boyd,
	Linus Walleij

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Stephen Boyd <sboyd@codeaurora.org>

commit bcd53f858d87f52843cc87764b283999126a50d6 upstream.

Timur reports that this code crashes if nfunctions is 0. Fix the
loop iteration to only consider valid elements of the functions
array.

Reported-by: Timur Tabi <timur@codeaurora.org>
Cc: Pramod Gurav <pramod.gurav@smartplayin.com>
Cc: Bjorn Andersson <bjorn.andersson@sonymobile.com>
Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Cc: Andy Gross <agross@codeaurora.org>
Fixes: 327455817a92 "pinctrl: qcom: Add support for reset for apq8064"
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/qcom/pinctrl-msm.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -865,10 +865,10 @@ static int msm_ps_hold_restart(struct no
 
 static void msm_pinctrl_setup_pm_reset(struct msm_pinctrl *pctrl)
 {
-	int i = 0;
+	int i;
 	const struct msm_function *func = pctrl->soc->functions;
 
-	for (; i <= pctrl->soc->nfunctions; i++)
+	for (i = 0; i < pctrl->soc->nfunctions; i++)
 		if (!strcmp(func[i].name, "ps_hold")) {
 			pctrl->restart_nb.notifier_call = msm_ps_hold_restart;
 			pctrl->restart_nb.priority = 128;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 04/61] pinctrl: Fix two deadlocks
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (2 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 03/61] pinctrl: qcom: Dont iterate past end of function array Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 05/61] mfd: tps65218: Make INT[12] and STATUS registers volatile Greg Kroah-Hartman
                   ` (58 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jim Lin, Linus Walleij

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jim Lin <jilin@nvidia.com>

commit db93facfb0ef542aa5d8079e47580b3e669a4d82 upstream.

This patch is to fix two deadlock cases.
Deadlock 1:
CPU #1
 pinctrl_register-> pinctrl_get ->
 create_pinctrl
 (Holding lock pinctrl_maps_mutex)
 -> get_pinctrl_dev_from_devname
 (Trying to acquire lock pinctrldev_list_mutex)
CPU #0
 pinctrl_unregister
 (Holding lock pinctrldev_list_mutex)
 -> pinctrl_put ->> pinctrl_free ->
 pinctrl_dt_free_maps -> pinctrl_unregister_map
 (Trying to acquire lock pinctrl_maps_mutex)

Simply to say
CPU#1 is holding lock A and trying to acquire lock B,
CPU#0 is holding lock B and trying to acquire lock A.

Deadlock 2:
CPU #3
 pinctrl_register-> pinctrl_get ->
 create_pinctrl
 (Holding lock pinctrl_maps_mutex)
 -> get_pinctrl_dev_from_devname
 (Trying to acquire lock pinctrldev_list_mutex)
CPU #2
 pinctrl_unregister
 (Holding lock pctldev->mutex)
 -> pinctrl_put ->> pinctrl_free ->
 pinctrl_dt_free_maps -> pinctrl_unregister_map
 (Trying to acquire lock pinctrl_maps_mutex)
CPU #0
 tegra_gpio_request
 (Holding lock pinctrldev_list_mutex)
 -> pinctrl_get_device_gpio_range
 (Trying to acquire lock pctldev->mutex)

Simply to say
CPU#3 is holding lock A and trying to acquire lock D,
CPU#2 is holding lock B and trying to acquire lock A,
CPU#0 is holding lock D and trying to acquire lock B.

Signed-off-by: Jim Lin <jilin@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pinctrl/core.c |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- a/drivers/pinctrl/core.c
+++ b/drivers/pinctrl/core.c
@@ -1801,14 +1801,15 @@ void pinctrl_unregister(struct pinctrl_d
 	if (pctldev == NULL)
 		return;
 
-	mutex_lock(&pinctrldev_list_mutex);
 	mutex_lock(&pctldev->mutex);
-
 	pinctrl_remove_device_debugfs(pctldev);
+	mutex_unlock(&pctldev->mutex);
 
 	if (!IS_ERR(pctldev->p))
 		pinctrl_put(pctldev->p);
 
+	mutex_lock(&pinctrldev_list_mutex);
+	mutex_lock(&pctldev->mutex);
 	/* TODO: check that no pinmuxes are still active? */
 	list_del(&pctldev->node);
 	/* Destroy descriptor tree */



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 05/61] mfd: tps65218: Make INT[12] and STATUS registers volatile
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (3 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 04/61] pinctrl: Fix two deadlocks Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 06/61] mfd: tps65218: Make INT1 our status_base register Greg Kroah-Hartman
                   ` (57 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Lee Jones

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <balbi@ti.com>

commit 773328da243978bebac82bf4c45604281edb6975 upstream.

STATUS register can be modified by the HW, so we
should bypass cache because of that.

In the case of INT[12] registers, they are the ones
that actually clear the IRQ source at the time they
are read. If we rely on the cache for them, we will
never be able to clear the interrupt, which will cause
our IRQ line to be disabled due to IRQ throttling.

Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/tps65218.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -125,10 +125,21 @@ int tps65218_clear_bits(struct tps65218
 }
 EXPORT_SYMBOL_GPL(tps65218_clear_bits);
 
+static const struct regmap_range tps65218_yes_ranges[] = {
+	regmap_reg_range(TPS65218_REG_INT1, TPS65218_REG_INT2),
+	regmap_reg_range(TPS65218_REG_STATUS, TPS65218_REG_STATUS),
+};
+
+static const struct regmap_access_table tps65218_volatile_table = {
+	.yes_ranges = tps65218_yes_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tps65218_yes_ranges),
+};
+
 static struct regmap_config tps65218_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
 	.cache_type = REGCACHE_RBTREE,
+	.volatile_table = &tps65218_volatile_table,
 };
 
 static const struct regmap_irq tps65218_irqs[] = {



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 06/61] mfd: tps65218: Make INT1 our status_base register
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (4 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 05/61] mfd: tps65218: Make INT[12] and STATUS registers volatile Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 07/61] mfd: rtsx_usb: Fix runtime PM deadlock Greg Kroah-Hartman
                   ` (56 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Felipe Balbi, Lee Jones

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <balbi@ti.com>

commit f29ae369a412942e81035984fa3d7a22ddf91fcb upstream.

If we don't tell regmap-irq that our first status
register is at offset 1, it will try to read offset
zero, which is the chipid register.

Fixes: 44b4dc6 mfd: tps65218: Add driver for the TPS65218 PMIC
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/tps65218.c |    1 +
 1 file changed, 1 insertion(+)

--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -204,6 +204,7 @@ static struct regmap_irq_chip tps65218_i
 
 	.num_regs = 2,
 	.mask_base = TPS65218_REG_INT_MASK1,
+	.status_base = TPS65218_REG_INT1,
 };
 
 static const struct of_device_id of_tps65218_match_table[] = {



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 07/61] mfd: rtsx_usb: Fix runtime PM deadlock
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (5 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 06/61] mfd: tps65218: Make INT1 our status_base register Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 08/61] libata: allow sata_sil24 to opt-out of tag ordered submission Greg Kroah-Hartman
                   ` (55 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Roger Tseng, Lee Jones

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Roger Tseng <rogerable@realtek.com>

commit b166010f6afbadb896efa37ff85eb681a8f89392 upstream.

sd_set_power_mode() in derived module drivers/mmc/host/rtsx_usb_sdmmc.c
acquires dev_mutex and then calls pm_runtime_get_sync() to make sure the
device is awake while initializing a newly inserted card. Once it is
called during suspending state and explicitly before rtsx_usb_suspend()
acquires the same dev_mutex, both routine deadlock and further hang the
driver because pm_runtime_get_sync() waits the pending PM operations.

Fix this by using an empty suspend method. mmc_core always turns the
LED off after a request is done and thus it is ok to remove the only
rtsx_usb_turn_off_led() here.

Fixes: 730876be2566 ("mfd: Add realtek USB card reader driver")
Signed-off-by: Roger Tseng <rogerable@realtek.com>
[Lee: Removed newly unused variable]
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/mfd/rtsx_usb.c |   12 ------------
 1 file changed, 12 deletions(-)

--- a/drivers/mfd/rtsx_usb.c
+++ b/drivers/mfd/rtsx_usb.c
@@ -681,21 +681,9 @@ static void rtsx_usb_disconnect(struct u
 #ifdef CONFIG_PM
 static int rtsx_usb_suspend(struct usb_interface *intf, pm_message_t message)
 {
-	struct rtsx_ucr *ucr =
-		(struct rtsx_ucr *)usb_get_intfdata(intf);
-
 	dev_dbg(&intf->dev, "%s called with pm message 0x%04x\n",
 			__func__, message.event);
 
-	/*
-	 * Call to make sure LED is off during suspend to save more power.
-	 * It is NOT a permanent state and could be turned on anytime later.
-	 * Thus no need to call turn_on when resunming.
-	 */
-	mutex_lock(&ucr->dev_mutex);
-	rtsx_usb_turn_off_led(ucr);
-	mutex_unlock(&ucr->dev_mutex);
-
 	return 0;
 }
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 08/61] libata: allow sata_sil24 to opt-out of tag ordered submission
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (6 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 07/61] mfd: rtsx_usb: Fix runtime PM deadlock Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 09/61] libata: prevent HSM state change race between ISR and PIO Greg Kroah-Hartman
                   ` (54 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tejun Heo, Ronny Hegewald, Dan Williams

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Williams <dan.j.williams@intel.com>

commit 72dd299d5039a336493993dcc63413cf31d0e662 upstream.

Ronny reports: https://bugzilla.kernel.org/show_bug.cgi?id=87101
    "Since commit 8a4aeec8d "libata/ahci: accommodate tag ordered
    controllers" the access to the harddisk on the first SATA-port is
    failing on its first access. The access to the harddisk on the
    second port is working normal.

    When reverting the above commit, access to both harddisks is working
    fine again."

Maintain tag ordered submission as the default, but allow sata_sil24 to
continue with the old behavior.

Cc: Tejun Heo <tj@kernel.org>
Reported-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/libata-core.c |    5 ++++-
 drivers/ata/sata_sil24.c  |    2 +-
 include/linux/libata.h    |    1 +
 3 files changed, 6 insertions(+), 2 deletions(-)

--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4740,7 +4740,10 @@ static struct ata_queued_cmd *ata_qc_new
 		return NULL;
 
 	for (i = 0, tag = ap->last_tag + 1; i < max_queue; i++, tag++) {
-		tag = tag < max_queue ? tag : 0;
+		if (ap->flags & ATA_FLAG_LOWTAG)
+			tag = i;
+		else
+			tag = tag < max_queue ? tag : 0;
 
 		/* the last tag is reserved for internal command. */
 		if (tag == ATA_TAG_INTERNAL)
--- a/drivers/ata/sata_sil24.c
+++ b/drivers/ata/sata_sil24.c
@@ -246,7 +246,7 @@ enum {
 	/* host flags */
 	SIL24_COMMON_FLAGS	= ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
 				  ATA_FLAG_NCQ | ATA_FLAG_ACPI_SATA |
-				  ATA_FLAG_AN | ATA_FLAG_PMP,
+				  ATA_FLAG_AN | ATA_FLAG_PMP | ATA_FLAG_LOWTAG,
 	SIL24_FLAG_PCIX_IRQ_WOC	= (1 << 24), /* IRQ loss errata on PCI-X */
 
 	IRQ_STAT_4PORTS		= 0xf,
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -230,6 +230,7 @@ enum {
 	ATA_FLAG_SW_ACTIVITY	= (1 << 22), /* driver supports sw activity
 					      * led */
 	ATA_FLAG_NO_DIPM	= (1 << 23), /* host not happy with DIPM */
+	ATA_FLAG_LOWTAG		= (1 << 24), /* host wants lowest available tag */
 
 	/* bits 24:31 of ap->flags are reserved for LLD specific flags */
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 09/61] libata: prevent HSM state change race between ISR and PIO
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (7 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 08/61] libata: allow sata_sil24 to opt-out of tag ordered submission Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 10/61] ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210 Greg Kroah-Hartman
                   ` (53 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Jeffery <djeffery@redhat.com>

commit ce7514526742c0898b837d4395f515b79dfb5a12 upstream.

It is possible for ata_sff_flush_pio_task() to set ap->hsm_task_state to
HSM_ST_IDLE in between the time __ata_sff_port_intr() checks for HSM_ST_IDLE
and before it calls ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().

This problem is hard to reproduce making this patch hard to verify, but this
fix will prevent the race.

I have not been able to reproduce the problem, but here is a crash dump from
a 2.6.32 kernel.

On examining the ata port's state, its hsm_task_state field has a value of HSM_ST_IDLE:

crash> struct ata_port.hsm_task_state ffff881c1121c000
  hsm_task_state = 0

Normally, this should not be possible as ata_sff_hsm_move() was called from ata_sff_host_intr(),
which checks hsm_task_state and won't call ata_sff_hsm_move() if it has a HSM_ST_IDLE value.

PID: 11053  TASK: ffff8816e846cae0  CPU: 0   COMMAND: "sshd"
 #0 [ffff88008ba03960] machine_kexec at ffffffff81038f3b
 #1 [ffff88008ba039c0] crash_kexec at ffffffff810c5d92
 #2 [ffff88008ba03a90] oops_end at ffffffff8152b510
 #3 [ffff88008ba03ac0] die at ffffffff81010e0b
 #4 [ffff88008ba03af0] do_trap at ffffffff8152ad74
 #5 [ffff88008ba03b50] do_invalid_op at ffffffff8100cf95
 #6 [ffff88008ba03bf0] invalid_op at ffffffff8100bf9b
    [exception RIP: ata_sff_hsm_move+317]
    RIP: ffffffff813a77ad  RSP: ffff88008ba03ca0  RFLAGS: 00010097
    RAX: 0000000000000000  RBX: ffff881c1121dc60  RCX: 0000000000000000
    RDX: ffff881c1121dd10  RSI: ffff881c1121dc60  RDI: ffff881c1121c000
    RBP: ffff88008ba03d00   R8: 0000000000000000   R9: 000000000000002e
    R10: 000000000001003f  R11: 000000000000009b  R12: ffff881c1121c000
    R13: 0000000000000000  R14: 0000000000000050  R15: ffff881c1121dd78
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
 #7 [ffff88008ba03d08] ata_sff_host_intr at ffffffff813a7fbd
 #8 [ffff88008ba03d38] ata_sff_interrupt at ffffffff813a821e
 #9 [ffff88008ba03d78] handle_IRQ_event at ffffffff810e6ec0
---
 drivers/ata/libata-sff.c |   12 ++++++++++++
 1 file changed, 12 insertions(+)

--- a/drivers/ata/libata-sff.c
+++ b/drivers/ata/libata-sff.c
@@ -1333,7 +1333,19 @@ void ata_sff_flush_pio_task(struct ata_p
 	DPRINTK("ENTER\n");
 
 	cancel_delayed_work_sync(&ap->sff_pio_task);
+
+	/*
+	 * We wanna reset the HSM state to IDLE.  If we do so without
+	 * grabbing the port lock, critical sections protected by it which
+	 * expect the HSM state to stay stable may get surprised.  For
+	 * example, we may set IDLE in between the time
+	 * __ata_sff_port_intr() checks for HSM_ST_IDLE and before it calls
+	 * ata_sff_hsm_move() causing ata_sff_hsm_move() to BUG().
+	 */
+	spin_lock_irq(ap->lock);
 	ap->hsm_task_state = HSM_ST_IDLE;
+	spin_unlock_irq(ap->lock);
+
 	ap->sff_pio_task_link = NULL;
 
 	if (ata_msg_ctl(ap))



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 10/61] ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (8 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 09/61] libata: prevent HSM state change race between ISR and PIO Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool Greg Kroah-Hartman
                   ` (52 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jason Lee Cragg, Takashi Iwai

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jason Lee Cragg <jcragg@gmail.com>

commit 6455931186bff407493135e74c5f32efd30860e2 upstream.

Signed-off-by: Jason Lee Cragg <jcragg@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 sound/usb/mixer.c |    1 +
 1 file changed, 1 insertion(+)

--- a/sound/usb/mixer.c
+++ b/sound/usb/mixer.c
@@ -909,6 +909,7 @@ static void volume_control_quirks(struct
 	case USB_ID(0x046d, 0x0807): /* Logitech Webcam C500 */
 	case USB_ID(0x046d, 0x0808):
 	case USB_ID(0x046d, 0x0809):
+	case USB_ID(0x046d, 0x0819): /* Logitech Webcam C210 */
 	case USB_ID(0x046d, 0x081b): /* HD Webcam c310 */
 	case USB_ID(0x046d, 0x081d): /* HD Webcam c510 */
 	case USB_ID(0x046d, 0x0825): /* HD Webcam c270 */



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (9 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 10/61] ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210 Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:51   ` Lai Jiangshan
  2015-01-28  1:26 ` [PATCH 3.18 12/61] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore Greg Kroah-Hartman
                   ` (51 subsequent siblings)
  62 siblings, 1 reply; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Tejun Heo, Eric Sandeen,
	Dave Chinner, Lai Jiangshan

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tejun Heo <tj@kernel.org>

commit 29187a9eeaf362d8422e62e17a22a6e115277a49 upstream.

A worker_pool's forward progress is guaranteed by the fact that the
last idle worker assumes the manager role to create more workers and
summon the rescuers if creating workers doesn't succeed in timely
manner before proceeding to execute work items.

This manager role is implemented in manage_workers(), which indicates
whether the worker may proceed to work item execution with its return
value.  This is necessary because multiple workers may contend for the
manager role, and, if there already is a manager, others should
proceed to work item execution.

Unfortunately, the function also indicates that the worker may proceed
to work item execution if need_to_create_worker() is false at the head
of the function.  need_to_create_worker() tests the following
conditions.

	pending work items && !nr_running && !nr_idle

The first and third conditions are protected by pool->lock and thus
won't change while holding pool->lock; however, nr_running can change
asynchronously as other workers block and resume and while it's likely
to be zero, as someone woke this worker up in the first place, some
other workers could have become runnable inbetween making it non-zero.

If this happens, manage_worker() could return false even with zero
nr_idle making the worker, the last idle one, proceed to execute work
items.  If then all workers of the pool end up blocking on a resource
which can only be released by a work item which is pending on that
pool, the whole pool can deadlock as there's no one to create more
workers or summon the rescuers.

This patch fixes the problem by removing the early exit condition from
maybe_create_worker() and making manage_workers() return false iff
there's already another manager, which ensures that the last worker
doesn't start executing work items.

We can leave the early exit condition alone and just ignore the return
value but the only reason it was put there is because the
manage_workers() used to perform both creations and destructions of
workers and thus the function may be invoked while the pool is trying
to reduce the number of workers.  Now that manage_workers() is called
only when more workers are needed, the only case this early exit
condition is triggered is rare race conditions rendering it pointless.

Tested with simulated workload and modified workqueue code which
trigger the pool deadlock reliably without this patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/workqueue.c |   25 ++++++++-----------------
 1 file changed, 8 insertions(+), 17 deletions(-)

--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1841,17 +1841,11 @@ static void pool_mayday_timeout(unsigned
  * spin_lock_irq(pool->lock) which may be released and regrabbed
  * multiple times.  Does GFP_KERNEL allocations.  Called only from
  * manager.
- *
- * Return:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
  */
-static bool maybe_create_worker(struct worker_pool *pool)
+static void maybe_create_worker(struct worker_pool *pool)
 __releases(&pool->lock)
 __acquires(&pool->lock)
 {
-	if (!need_to_create_worker(pool))
-		return false;
 restart:
 	spin_unlock_irq(&pool->lock);
 
@@ -1877,7 +1871,6 @@ restart:
 	 */
 	if (need_to_create_worker(pool))
 		goto restart;
-	return true;
 }
 
 /**
@@ -1897,16 +1890,14 @@ restart:
  * multiple times.  Does GFP_KERNEL allocations.
  *
  * Return:
- * %false if the pool don't need management and the caller can safely start
- * processing works, %true indicates that the function released pool->lock
- * and reacquired it to perform some management function and that the
- * conditions that the caller verified while holding the lock before
- * calling the function might no longer be true.
+ * %false if the pool doesn't need management and the caller can safely
+ * start processing works, %true if management function was performed and
+ * the conditions that the caller verified before calling the function may
+ * no longer be true.
  */
 static bool manage_workers(struct worker *worker)
 {
 	struct worker_pool *pool = worker->pool;
-	bool ret = false;
 
 	/*
 	 * Anyone who successfully grabs manager_arb wins the arbitration
@@ -1919,12 +1910,12 @@ static bool manage_workers(struct worker
 	 * actual management, the pool may stall indefinitely.
 	 */
 	if (!mutex_trylock(&pool->manager_arb))
-		return ret;
+		return false;
 
-	ret |= maybe_create_worker(pool);
+	maybe_create_worker(pool);
 
 	mutex_unlock(&pool->manager_arb);
-	return ret;
+	return true;
 }
 
 /**



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 12/61] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (10 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 13/61] drm/i915: Ban Haswell from using RCS flips Greg Kroah-Hartman
                   ` (50 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Matt Fleming,
	John Paul Adrian Glaubitz, Michael Karcher, Steven Rostedt

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>

commit 1caf6aaaa47471831d77c75f094d4e00ad1ec808 upstream.

Compiling SH with gcc-4.8 fails due to the -m32 option not being
supported.

>From http://buildd.debian-ports.org/status/fetch.php?pkg=linux&arch=sh4&ver=3.16.7-ckt4-1&stamp=1421425783

      CC      init/main.o
    gcc-4.8: error: unrecognized command line option '-m32'
    ld: cannot find init/.tmp_mc_main.o: No such file or directory
    objcopy: 'init/.tmp_mx_main.o': No such file
    rm: cannot remove 'init/.tmp_mx_main.o': No such file or directory
    rm: cannot remove 'init/.tmp_mc_main.o': No such file or directory

Link: http://lkml.kernel.org/r/1421537778-29001-1-git-send-email-kernel@mkarcher.dialup.fu-berlin.de
Link: http://lkml.kernel.org/r/54BCBDD4.10102@physik.fu-berlin.de

Cc: Matt Fleming <matt@console-pimps.org>
Reported-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 scripts/recordmcount.pl |    1 -
 1 file changed, 1 deletion(-)

--- a/scripts/recordmcount.pl
+++ b/scripts/recordmcount.pl
@@ -255,7 +255,6 @@ if ($arch eq "x86_64") {
     # force flags for this arch
     $ld .= " -m shlelf_linux";
     $objcopy .= " -O elf32-sh-linux";
-    $cc .= " -m32";
 
 } elsif ($arch eq "powerpc") {
     $local_regex = "^[0-9a-fA-F]+\\s+t\\s+(\\.?\\S+)";



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 13/61] drm/i915: Ban Haswell from using RCS flips
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (11 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 12/61] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 14/61] drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES Greg Kroah-Hartman
                   ` (49 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Chris Wilson, Daniel Vetter, Jani Nikula

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 48bf5b2d00bfeb681f6500c626189c7cd2c964d2 upstream.

Like Ivybridge, we have reports that we get random hangs when flipping
with multiple pipes. Extend

commit 2a92d5bca1999b69c78f3c3e97b5484985b094b9
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Tue Jul 8 10:40:29 2014 +0100

    drm/i915: Disable RCS flips on Ivybridge

to also apply to Haswell.

Reported-and-tested-by: Scott Tsai <scottt.tw@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87759
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/intel_display.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -10019,7 +10019,7 @@ static int intel_crtc_page_flip(struct d
 		if (obj->tiling_mode != work->old_fb_obj->tiling_mode)
 			/* vlv: DISPLAY_FLIP fails to change tiling */
 			ring = NULL;
-	} else if (IS_IVYBRIDGE(dev)) {
+	} else if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) {
 		ring = &dev_priv->ring[BCS];
 	} else if (INTEL_INFO(dev)->gen >= 7) {
 		ring = obj->ring;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 14/61] drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (12 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 13/61] drm/i915: Ban Haswell from using RCS flips Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 15/61] drm/radeon: add a dpm quirk list Greg Kroah-Hartman
                   ` (48 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Chris Wilson, Daniel Vetter, Jani Nikula

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Chris Wilson <chris@chris-wilson.co.uk>

commit 226e5ae9e5f9108beb0bde4ac69f68fe6210fed9 upstream.

If CONFIG_DEBUG_MUTEXES is set, the mutex->owner field is only cleared
if the mutex debugging is enabled which introduces a race in our
mutex_is_locked_by() - i.e. we may inspect the old owner value before it
is acquired by the new task.

This is the root cause of this error:

# diff --git a/kernel/locking/mutex-debug.c b/kernel/locking/mutex-debug.c
# index 5cf6731..3ef3736 100644
# --- a/kernel/locking/mutex-debug.c
# +++ b/kernel/locking/mutex-debug.c
# @@ -80,13 +80,13 @@ void debug_mutex_unlock(struct mutex *lock)
# 			DEBUG_LOCKS_WARN_ON(lock->owner != current);
#
# 		DEBUG_LOCKS_WARN_ON(!lock->wait_list.prev && !lock->wait_list.next);
# -		mutex_clear_owner(lock);
# 	}
#
# 	/*
# 	 * __mutex_slowpath_needs_to_unlock() is explicitly 0 for debug
# 	 * mutexes so that we can do it here after we've verified state.
# 	 */
# +	mutex_clear_owner(lock);
# 	atomic_set(&lock->count, 1);
#  }

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=87955
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/i915/i915_gem.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -5144,7 +5144,7 @@ static bool mutex_is_locked_by(struct mu
 	if (!mutex_is_locked(mutex))
 		return false;
 
-#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_MUTEXES)
+#if defined(CONFIG_SMP) && !defined(CONFIG_DEBUG_MUTEXES)
 	return mutex->owner == task;
 #else
 	/* Since UP may be pre-empted, we cannot assume that we own the lock */



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 15/61] drm/radeon: add a dpm quirk list
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (13 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 14/61] drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 16/61] drm/radeon: add si " Greg Kroah-Hartman
                   ` (47 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alex Deucher

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 4369a69ec6ab86821352bd753c68af5880f87956 upstream.

Disable dpm on certain problematic boards rather than
disabling dpm for the entire chip family since most
boards work fine.

https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386534
https://bugzilla.kernel.org/show_bug.cgi?id=83731

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_pm.c |   33 +++++++++++++++++++++++++++++++++
 1 file changed, 33 insertions(+)

--- a/drivers/gpu/drm/radeon/radeon_pm.c
+++ b/drivers/gpu/drm/radeon/radeon_pm.c
@@ -1287,8 +1287,39 @@ dpm_failed:
 	return ret;
 }
 
+struct radeon_dpm_quirk {
+	u32 chip_vendor;
+	u32 chip_device;
+	u32 subsys_vendor;
+	u32 subsys_device;
+};
+
+/* cards with dpm stability problems */
+static struct radeon_dpm_quirk radeon_dpm_quirk_list[] = {
+	/* TURKS - https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386534 */
+	{ PCI_VENDOR_ID_ATI, 0x6759, 0x1682, 0x3195 },
+	/* TURKS - https://bugzilla.kernel.org/show_bug.cgi?id=83731 */
+	{ PCI_VENDOR_ID_ATI, 0x6840, 0x1179, 0xfb81 },
+	{ 0, 0, 0, 0 },
+};
+
 int radeon_pm_init(struct radeon_device *rdev)
 {
+	struct radeon_dpm_quirk *p = radeon_dpm_quirk_list;
+	bool disable_dpm = false;
+
+	/* Apply dpm quirks */
+	while (p && p->chip_device != 0) {
+		if (rdev->pdev->vendor == p->chip_vendor &&
+		    rdev->pdev->device == p->chip_device &&
+		    rdev->pdev->subsystem_vendor == p->subsys_vendor &&
+		    rdev->pdev->subsystem_device == p->subsys_device) {
+			disable_dpm = true;
+			break;
+		}
+		++p;
+	}
+
 	/* enable dpm on rv6xx+ */
 	switch (rdev->family) {
 	case CHIP_RV610:
@@ -1344,6 +1375,8 @@ int radeon_pm_init(struct radeon_device
 			 (!(rdev->flags & RADEON_IS_IGP)) &&
 			 (!rdev->smc_fw))
 			rdev->pm.pm_method = PM_METHOD_PROFILE;
+		else if (disable_dpm && (radeon_dpm == -1))
+			rdev->pm.pm_method = PM_METHOD_PROFILE;
 		else if (radeon_dpm == 0)
 			rdev->pm.pm_method = PM_METHOD_PROFILE;
 		else



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 16/61] drm/radeon: add si dpm quirk list
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (14 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 15/61] drm/radeon: add a dpm quirk list Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 17/61] drm/radeon: use rv515_ring_start on r5xx Greg Kroah-Hartman
                   ` (46 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alex Deucher

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit 5615f890bc6babdc2998dec62f3552326d06eb7b upstream.

This adds a quirks list to fix stability problems with
certain SI boards.

bug:
https://bugs.freedesktop.org/show_bug.cgi?id=76490

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/si_dpm.c |   39 +++++++++++++++++++++++++++++++++++++++
 1 file changed, 39 insertions(+)

--- a/drivers/gpu/drm/radeon/si_dpm.c
+++ b/drivers/gpu/drm/radeon/si_dpm.c
@@ -2908,6 +2908,22 @@ static int si_init_smc_spll_table(struct
 	return ret;
 }
 
+struct si_dpm_quirk {
+	u32 chip_vendor;
+	u32 chip_device;
+	u32 subsys_vendor;
+	u32 subsys_device;
+	u32 max_sclk;
+	u32 max_mclk;
+};
+
+/* cards with dpm stability problems */
+static struct si_dpm_quirk si_dpm_quirk_list[] = {
+	/* PITCAIRN - https://bugs.freedesktop.org/show_bug.cgi?id=76490 */
+	{ PCI_VENDOR_ID_ATI, 0x6810, 0x1462, 0x3036, 0, 120000 },
+	{ 0, 0, 0, 0 },
+};
+
 static void si_apply_state_adjust_rules(struct radeon_device *rdev,
 					struct radeon_ps *rps)
 {
@@ -2918,7 +2934,22 @@ static void si_apply_state_adjust_rules(
 	u32 mclk, sclk;
 	u16 vddc, vddci;
 	u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
+	u32 max_sclk = 0, max_mclk = 0;
 	int i;
+	struct si_dpm_quirk *p = si_dpm_quirk_list;
+
+	/* Apply dpm quirks */
+	while (p && p->chip_device != 0) {
+		if (rdev->pdev->vendor == p->chip_vendor &&
+		    rdev->pdev->device == p->chip_device &&
+		    rdev->pdev->subsystem_vendor == p->subsys_vendor &&
+		    rdev->pdev->subsystem_device == p->subsys_device) {
+			max_sclk = p->max_sclk;
+			max_mclk = p->max_mclk;
+			break;
+		}
+		++p;
+	}
 
 	if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
 	    ni_dpm_vblank_too_short(rdev))
@@ -2972,6 +3003,14 @@ static void si_apply_state_adjust_rules(
 			if (ps->performance_levels[i].mclk > max_mclk_vddc)
 				ps->performance_levels[i].mclk = max_mclk_vddc;
 		}
+		if (max_mclk) {
+			if (ps->performance_levels[i].mclk > max_mclk)
+				ps->performance_levels[i].mclk = max_mclk;
+		}
+		if (max_sclk) {
+			if (ps->performance_levels[i].sclk > max_sclk)
+				ps->performance_levels[i].sclk = max_sclk;
+		}
 	}
 
 	/* XXX validate the min clocks required for display */



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 17/61] drm/radeon: use rv515_ring_start on r5xx
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (15 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 16/61] drm/radeon: add si " Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 18/61] PCI: Pass bridge device, not bus, when updating bridge windows Greg Kroah-Hartman
                   ` (45 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alex Deucher

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Deucher <alexander.deucher@amd.com>

commit d8a74e186949e1a2c2f1309212478b0659bf9225 upstream.

This was accidently lost in 76a0df859def.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/gpu/drm/radeon/radeon_asic.c |   18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)

--- a/drivers/gpu/drm/radeon/radeon_asic.c
+++ b/drivers/gpu/drm/radeon/radeon_asic.c
@@ -333,6 +333,20 @@ static struct radeon_asic_ring r300_gfx_
 	.set_wptr = &r100_gfx_set_wptr,
 };
 
+static struct radeon_asic_ring rv515_gfx_ring = {
+	.ib_execute = &r100_ring_ib_execute,
+	.emit_fence = &r300_fence_ring_emit,
+	.emit_semaphore = &r100_semaphore_ring_emit,
+	.cs_parse = &r300_cs_parse,
+	.ring_start = &rv515_ring_start,
+	.ring_test = &r100_ring_test,
+	.ib_test = &r100_ib_test,
+	.is_lockup = &r100_gpu_is_lockup,
+	.get_rptr = &r100_gfx_get_rptr,
+	.get_wptr = &r100_gfx_get_wptr,
+	.set_wptr = &r100_gfx_set_wptr,
+};
+
 static struct radeon_asic r300_asic = {
 	.init = &r300_init,
 	.fini = &r300_fini,
@@ -748,7 +762,7 @@ static struct radeon_asic rv515_asic = {
 		.set_page = &rv370_pcie_gart_set_page,
 	},
 	.ring = {
-		[RADEON_RING_TYPE_GFX_INDEX] = &r300_gfx_ring
+		[RADEON_RING_TYPE_GFX_INDEX] = &rv515_gfx_ring
 	},
 	.irq = {
 		.set = &rs600_irq_set,
@@ -814,7 +828,7 @@ static struct radeon_asic r520_asic = {
 		.set_page = &rv370_pcie_gart_set_page,
 	},
 	.ring = {
-		[RADEON_RING_TYPE_GFX_INDEX] = &r300_gfx_ring
+		[RADEON_RING_TYPE_GFX_INDEX] = &rv515_gfx_ring
 	},
 	.irq = {
 		.set = &rs600_irq_set,



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 18/61] PCI: Pass bridge device, not bus, when updating bridge windows
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (16 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 17/61] drm/radeon: use rv515_ring_start on r5xx Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 19/61] PCI: Add pci_claim_bridge_resource() to clip window if necessary Greg Kroah-Hartman
                   ` (44 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Kordik, Yinghai Lu, Bjorn Helgaas

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yinghai Lu <yinghai@kernel.org>

commit 3f2f4dc456e9f80849b99d79600a7257690ca4b1 upstream.

pci_setup_bridge_io(), pci_setup_bridge_mmio(), and
pci_setup_bridge_mmio_pref() program the windows of PCI-PCI bridges.
Previously they accepted a pointer to the pci_bus of the secondary bus,
then looked up the bridge leading to that bus.  Pass the bridge directly,
which will make it more convenient for future callers.

No functional change.

[bhelgaas: changelog, split into separate patch]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491
Reported-by: Marek Kordik <kordikmarek@gmail.com>
Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/setup-bus.c |   21 +++++++++------------
 1 file changed, 9 insertions(+), 12 deletions(-)

--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -530,9 +530,8 @@ EXPORT_SYMBOL(pci_setup_cardbus);
    config space writes, so it's quite possible that an I/O window of
    the bridge will have some undesirable address (e.g. 0) after the
    first write. Ditto 64-bit prefetchable MMIO.  */
-static void pci_setup_bridge_io(struct pci_bus *bus)
+static void pci_setup_bridge_io(struct pci_dev *bridge)
 {
-	struct pci_dev *bridge = bus->self;
 	struct resource *res;
 	struct pci_bus_region region;
 	unsigned long io_mask;
@@ -545,7 +544,7 @@ static void pci_setup_bridge_io(struct p
 		io_mask = PCI_IO_1K_RANGE_MASK;
 
 	/* Set up the top and bottom of the PCI I/O segment for this bus. */
-	res = bus->resource[0];
+	res = &bridge->resource[PCI_BRIDGE_RESOURCES + 0];
 	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_IO) {
 		pci_read_config_word(bridge, PCI_IO_BASE, &l);
@@ -568,15 +567,14 @@ static void pci_setup_bridge_io(struct p
 	pci_write_config_dword(bridge, PCI_IO_BASE_UPPER16, io_upper16);
 }
 
-static void pci_setup_bridge_mmio(struct pci_bus *bus)
+static void pci_setup_bridge_mmio(struct pci_dev *bridge)
 {
-	struct pci_dev *bridge = bus->self;
 	struct resource *res;
 	struct pci_bus_region region;
 	u32 l;
 
 	/* Set up the top and bottom of the PCI Memory segment for this bus. */
-	res = bus->resource[1];
+	res = &bridge->resource[PCI_BRIDGE_RESOURCES + 1];
 	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_MEM) {
 		l = (region.start >> 16) & 0xfff0;
@@ -588,9 +586,8 @@ static void pci_setup_bridge_mmio(struct
 	pci_write_config_dword(bridge, PCI_MEMORY_BASE, l);
 }
 
-static void pci_setup_bridge_mmio_pref(struct pci_bus *bus)
+static void pci_setup_bridge_mmio_pref(struct pci_dev *bridge)
 {
-	struct pci_dev *bridge = bus->self;
 	struct resource *res;
 	struct pci_bus_region region;
 	u32 l, bu, lu;
@@ -602,7 +599,7 @@ static void pci_setup_bridge_mmio_pref(s
 
 	/* Set up PREF base/limit. */
 	bu = lu = 0;
-	res = bus->resource[2];
+	res = &bridge->resource[PCI_BRIDGE_RESOURCES + 2];
 	pcibios_resource_to_bus(bridge->bus, &region, res);
 	if (res->flags & IORESOURCE_PREFETCH) {
 		l = (region.start >> 16) & 0xfff0;
@@ -630,13 +627,13 @@ static void __pci_setup_bridge(struct pc
 		 &bus->busn_res);
 
 	if (type & IORESOURCE_IO)
-		pci_setup_bridge_io(bus);
+		pci_setup_bridge_io(bridge);
 
 	if (type & IORESOURCE_MEM)
-		pci_setup_bridge_mmio(bus);
+		pci_setup_bridge_mmio(bridge);
 
 	if (type & IORESOURCE_PREFETCH)
-		pci_setup_bridge_mmio_pref(bus);
+		pci_setup_bridge_mmio_pref(bridge);
 
 	pci_write_config_word(bridge, PCI_BRIDGE_CONTROL, bus->bridge_ctl);
 }



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 19/61] PCI: Add pci_claim_bridge_resource() to clip window if necessary
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (17 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 18/61] PCI: Pass bridge device, not bus, when updating bridge windows Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 20/61] PCI: Add pci_bus_clip_resource() to clip to fit upstream window Greg Kroah-Hartman
                   ` (43 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Kordik, Yinghai Lu, Bjorn Helgaas

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yinghai Lu <yinghai@kernel.org>

commit 8505e729a2f6eb0803ff943a15f133dd10afff3a upstream.

Add pci_claim_bridge_resource() to claim a PCI-PCI bridge window.  This is
like regular pci_claim_resource(), except that if we fail to claim the
window, we check to see if we can reduce the size of the window and try
again.

This is for scenarios like this:

  pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff]
  pci 0000:00:01.0:   bridge window [mem 0xbdf00000-0xddefffff 64bit pref]
  pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff pref]

The 00:01.0 window is illegal: it starts before the host bridge window, so
we have to assume the [0xbdf00000-0xbfffffff] region is inaccessible.  We
can make it legal by clipping it to [mem 0xc0000000-0xddefffff 64bit pref].

Previously we discarded the 00:01.0 window and tried to reassign that part
of the hierarchy from scratch.  That is a problem because Linux doesn't
always assign things optimally.  For example, in this case, BIOS put the
01:00.0 device in a prefetchable window below 4GB, but after 5b28541552ef,
Linux puts the prefetchable window above 4GB where the 32-bit 01:00.0
device can't use it.

Clipping the 00:01.0 window is less intrusive than completely reassigning
things and is sufficient to let us use most of the BIOS configuration.  Of
course, it's possible that devices below 00:01.0 will no longer fit.  If
that's the case, we'll have to reassign things.  But that's a separate
problem.

[bhelgaas: changelog, split into separate patch]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491
Reported-by: Marek Kordik <kordikmarek@gmail.com>
Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/setup-bus.c |   35 +++++++++++++++++++++++++++++++++++
 include/linux/pci.h     |    1 +
 2 files changed, 36 insertions(+)

--- a/drivers/pci/setup-bus.c
+++ b/drivers/pci/setup-bus.c
@@ -646,6 +646,41 @@ void pci_setup_bridge(struct pci_bus *bu
 	__pci_setup_bridge(bus, type);
 }
 
+
+int pci_claim_bridge_resource(struct pci_dev *bridge, int i)
+{
+	if (i < PCI_BRIDGE_RESOURCES || i > PCI_BRIDGE_RESOURCE_END)
+		return 0;
+
+	if (pci_claim_resource(bridge, i) == 0)
+		return 0;	/* claimed the window */
+
+	if ((bridge->class >> 8) != PCI_CLASS_BRIDGE_PCI)
+		return 0;
+
+	if (!pci_bus_clip_resource(bridge, i))
+		return -EINVAL;	/* clipping didn't change anything */
+
+	switch (i - PCI_BRIDGE_RESOURCES) {
+	case 0:
+		pci_setup_bridge_io(bridge);
+		break;
+	case 1:
+		pci_setup_bridge_mmio(bridge);
+		break;
+	case 2:
+		pci_setup_bridge_mmio_pref(bridge);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (pci_claim_resource(bridge, i) == 0)
+		return 0;	/* claimed a smaller window */
+
+	return -EINVAL;
+}
+
 /* Check whether the bridge supports optional I/O and
    prefetchable memory ranges. If not, the respective
    base/limit registers must be read-only and read as 0. */
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1062,6 +1062,7 @@ resource_size_t pcibios_retrieve_fw_addr
 void pci_bus_assign_resources(const struct pci_bus *bus);
 void pci_bus_size_bridges(struct pci_bus *bus);
 int pci_claim_resource(struct pci_dev *, int);
+int pci_claim_bridge_resource(struct pci_dev *bridge, int i);
 void pci_assign_unassigned_resources(void);
 void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge);
 void pci_assign_unassigned_bus_resources(struct pci_bus *bus);



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 20/61] PCI: Add pci_bus_clip_resource() to clip to fit upstream window
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (18 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 19/61] PCI: Add pci_claim_bridge_resource() to clip window if necessary Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 21/61] x86/PCI: Clip bridge windows to fit in upstream windows Greg Kroah-Hartman
                   ` (42 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Kordik, Yinghai Lu, Bjorn Helgaas

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yinghai Lu <yinghai@kernel.org>

commit 0f7e7aee2f37119a32e6e8b63250922442528961 upstream.

Add pci_bus_clip_resource().  If a PCI-PCI bridge window overlaps an
upstream bridge window but is not completely contained by it, this clips
the downstream window so it fits inside the upstream one.

No functional change (this adds the function but no callers).

[bhelgaas: changelog, split into separate patch]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491
Reported-by: Marek Kordik <kordikmarek@gmail.com>
Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/pci/bus.c b/drivers/pci/bus.c
index 73aef51a28f0..8fb16188cd82 100644
--- a/drivers/pci/bus.c
+++ b/drivers/pci/bus.c
@@ -228,6 +228,49 @@ int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
 }
 EXPORT_SYMBOL(pci_bus_alloc_resource);
 
+/*
+ * The @idx resource of @dev should be a PCI-PCI bridge window.  If this
+ * resource fits inside a window of an upstream bridge, do nothing.  If it
+ * overlaps an upstream window but extends outside it, clip the resource so
+ * it fits completely inside.
+ */
+bool pci_bus_clip_resource(struct pci_dev *dev, int idx)
+{
+	struct pci_bus *bus = dev->bus;
+	struct resource *res = &dev->resource[idx];
+	struct resource orig_res = *res;
+	struct resource *r;
+	int i;
+
+	pci_bus_for_each_resource(bus, r, i) {
+		resource_size_t start, end;
+
+		if (!r)
+			continue;
+
+		if (resource_type(res) != resource_type(r))
+			continue;
+
+		start = max(r->start, res->start);
+		end = min(r->end, res->end);
+
+		if (start > end)
+			continue;	/* no overlap */
+
+		if (res->start == start && res->end == end)
+			return false;	/* no change */
+
+		res->start = start;
+		res->end = end;
+		dev_printk(KERN_DEBUG, &dev->dev, "%pR clipped to %pR\n",
+				 &orig_res, res);
+
+		return true;
+	}
+
+	return false;
+}
+
 void __weak pcibios_resource_survey_bus(struct pci_bus *bus) { }
 
 /**
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 8aff29a804ff..d54632a1db43 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -208,6 +208,7 @@ void __pci_bus_size_bridges(struct pci_bus *bus,
 void __pci_bus_assign_resources(const struct pci_bus *bus,
 				struct list_head *realloc_head,
 				struct list_head *fail_head);
+bool pci_bus_clip_resource(struct pci_dev *dev, int idx);
 
 /**
  * pci_ari_enabled - query ARI forwarding status



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 21/61] x86/PCI: Clip bridge windows to fit in upstream windows
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (19 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 20/61] PCI: Add pci_bus_clip_resource() to clip to fit upstream window Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 22/61] PCI: Add flag for devices where we cant use bus reset Greg Kroah-Hartman
                   ` (41 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Marek Kordik, Yinghai Lu,
	Bjorn Helgaas, Thomas Gleixner, Ingo Molnar, H. Peter Anvin, x86

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Yinghai Lu <yinghai@kernel.org>

commit 851b09369255a91e77f56d83e3643439ac5b209a upstream.

Every PCI-PCI bridge window should fit inside an upstream bridge window
because orphaned address space is unreachable from the primary side of the
upstream bridge.  If we inherit invalid bridge windows that overlap an
upstream window from firmware, clip them to fit and update the bridge
accordingly.

[bhelgaas: changelog]
Link: https://bugzilla.kernel.org/show_bug.cgi?id=85491
Reported-by: Marek Kordik <kordikmarek@gmail.com>
Tested-by: Marek Kordik <kordikmarek@gmail.com>
Fixes: 5b28541552ef ("PCI: Restrict 64-bit prefetchable bridge windows to 64-bit resources")
Signed-off-by: Yinghai Lu <yinghai@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Ingo Molnar <mingo@redhat.com>
CC: "H. Peter Anvin" <hpa@zytor.com>
CC: x86@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/pci/i386.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/pci/i386.c
+++ b/arch/x86/pci/i386.c
@@ -216,7 +216,7 @@ static void pcibios_allocate_bridge_reso
 			continue;
 		if (r->parent)	/* Already allocated */
 			continue;
-		if (!r->start || pci_claim_resource(dev, idx) < 0) {
+		if (!r->start || pci_claim_bridge_resource(dev, idx) < 0) {
 			/*
 			 * Something is wrong with the region.
 			 * Invalidate the resource to prevent



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 22/61] PCI: Add flag for devices where we cant use bus reset
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (20 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 21/61] x86/PCI: Clip bridge windows to fit in upstream windows Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 23/61] PCI: Mark Atheros AR93xx to avoid " Greg Kroah-Hartman
                   ` (40 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Alex Williamson, Bjorn Helgaas

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit f331a859e0ee5a898c1f47596eddad4c4f02d657 upstream.

Enable a mechanism for devices to quirk that they do not behave when
doing a PCI bus reset.  We require a modest level of spec compliant
behavior in order to do a reset, for instance the device should come
out of reset without throwing errors and PCI config space should be
accessible after reset.  This is too much to ask for some devices.

Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/pci.c   |   40 ++++++++++++++++++++++++++++++++++++----
 include/linux/pci.h |    2 ++
 2 files changed, 38 insertions(+), 4 deletions(-)

--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -3280,7 +3280,8 @@ static int pci_parent_bus_reset(struct p
 {
 	struct pci_dev *pdev;
 
-	if (pci_is_root_bus(dev->bus) || dev->subordinate || !dev->bus->self)
+	if (pci_is_root_bus(dev->bus) || dev->subordinate ||
+	    !dev->bus->self || dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)
 		return -ENOTTY;
 
 	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
@@ -3314,7 +3315,8 @@ static int pci_dev_reset_slot_function(s
 {
 	struct pci_dev *pdev;
 
-	if (dev->subordinate || !dev->slot)
+	if (dev->subordinate || !dev->slot ||
+	    dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)
 		return -ENOTTY;
 
 	list_for_each_entry(pdev, &dev->bus->devices, bus_list)
@@ -3566,6 +3568,20 @@ int pci_try_reset_function(struct pci_de
 }
 EXPORT_SYMBOL_GPL(pci_try_reset_function);
 
+/* Do any devices on or below this bus prevent a bus reset? */
+static bool pci_bus_resetable(struct pci_bus *bus)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &bus->devices, bus_list) {
+		if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
+		    (dev->subordinate && !pci_bus_resetable(dev->subordinate)))
+			return false;
+	}
+
+	return true;
+}
+
 /* Lock devices from the top of the tree down */
 static void pci_bus_lock(struct pci_bus *bus)
 {
@@ -3616,6 +3632,22 @@ unlock:
 	return 0;
 }
 
+/* Do any devices on or below this slot prevent a bus reset? */
+static bool pci_slot_resetable(struct pci_slot *slot)
+{
+	struct pci_dev *dev;
+
+	list_for_each_entry(dev, &slot->bus->devices, bus_list) {
+		if (!dev->slot || dev->slot != slot)
+			continue;
+		if (dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET ||
+		    (dev->subordinate && !pci_bus_resetable(dev->subordinate)))
+			return false;
+	}
+
+	return true;
+}
+
 /* Lock devices from the top of the tree down */
 static void pci_slot_lock(struct pci_slot *slot)
 {
@@ -3737,7 +3769,7 @@ static int pci_slot_reset(struct pci_slo
 {
 	int rc;
 
-	if (!slot)
+	if (!slot || !pci_slot_resetable(slot))
 		return -ENOTTY;
 
 	if (!probe)
@@ -3829,7 +3861,7 @@ EXPORT_SYMBOL_GPL(pci_try_reset_slot);
 
 static int pci_bus_reset(struct pci_bus *bus, int probe)
 {
-	if (!bus->self)
+	if (!bus->self || !pci_bus_resetable(bus))
 		return -ENOTTY;
 
 	if (probe)
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -175,6 +175,8 @@ enum pci_dev_flags {
 	PCI_DEV_FLAGS_DMA_ALIAS_DEVFN = (__force pci_dev_flags_t) (1 << 4),
 	/* Use a PCIe-to-PCI bridge alias even if !pci_is_pcie */
 	PCI_DEV_FLAG_PCIE_BRIDGE_ALIAS = (__force pci_dev_flags_t) (1 << 5),
+	/* Do not use bus resets for device */
+	PCI_DEV_FLAGS_NO_BUS_RESET = (__force pci_dev_flags_t) (1 << 6),
 };
 
 enum pci_irq_reroute_variant {



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 23/61] PCI: Mark Atheros AR93xx to avoid bus reset
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (21 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 22/61] PCI: Add flag for devices where we cant use bus reset Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 24/61] ipr: wait for aborted command responses Greg Kroah-Hartman
                   ` (39 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andreas Hartmann, Alex Williamson,
	Bjorn Helgaas

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alex Williamson <alex.williamson@redhat.com>

commit c3e59ee4e76686b0c84ca8faa1011d10cd4ca1b8 upstream.

Reports against the TL-WDN4800 card indicate that PCI bus reset of this
Atheros device cause system lock-ups and resets.  I've also been able to
confirm this behavior on multiple systems.  The device never returns from
reset and attempts to access config space of the device after reset result
in hangs.  Blacklist bus reset for the device to avoid this issue.

[bhelgaas: This regression appeared in v3.14.  Andreas bisected it to
425c1b223dac ("PCI: Add Virtual Channel to save/restore support"), but we
don't understand the mechanism by which that commit affects the reset
path.]

[bhelgaas: changelog, references]
Link: http://lkml.kernel.org/r/20140923210318.498dacbd@dualc.maya.org
Reported-by: Andreas Hartmann <andihartmann@freenet.de>
Tested-by: Andreas Hartmann <andihartmann@freenet.de>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/pci/quirks.c |   14 ++++++++++++++
 1 file changed, 14 insertions(+)

--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -3008,6 +3008,20 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_R
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_MELLANOX, PCI_ANY_ID,
 			 quirk_broken_intx_masking);
 
+static void quirk_no_bus_reset(struct pci_dev *dev)
+{
+	dev->dev_flags |= PCI_DEV_FLAGS_NO_BUS_RESET;
+}
+
+/*
+ * Atheros AR93xx chips do not behave after a bus reset.  The device will
+ * throw a Link Down error on AER-capable systems and regardless of AER,
+ * config space of the device is never accessible again and typically
+ * causes the system to hang or reset when access is attempted.
+ * http://www.spinics.net/lists/linux-pci/msg34797.html
+ */
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATHEROS, 0x0030, quirk_no_bus_reset);
+
 #ifdef CONFIG_ACPI
 /*
  * Apple: Shutdown Cactus Ridge Thunderbolt controller.



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 24/61] ipr: wait for aborted command responses
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (22 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 23/61] PCI: Mark Atheros AR93xx to avoid " Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 25/61] [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry Greg Kroah-Hartman
                   ` (38 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Brian King, Wendy Xiong, Christoph Hellwig

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Brian King <brking@linux.vnet.ibm.com>

commit 6cdb08172bc89f0a39e1643c5e7eab362692fd1b upstream.

Fixes a race condition in abort handling that was injected
when multiple interrupt support was added. When only a single
interrupt is present, the adapter guarantees it will send
responses for aborted commands prior to the response for the
abort command itself. With multiple interrupts, these responses
generally come back on different interrupts, so we need to
ensure the abort thread waits until the aborted command is
complete so we don't perform a double completion. This race
condition was being hit frequently in environments which
were triggering command timeouts, which was resulting in
a double completion causing a kernel oops.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Reviewed-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Tested-by: Wendy Xiong <wenxiong@linux.vnet.ibm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/scsi/ipr.c |   92 +++++++++++++++++++++++++++++++++++++++++++++++++++++
 drivers/scsi/ipr.h |    1 
 2 files changed, 93 insertions(+)

--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -683,6 +683,7 @@ static void ipr_init_ipr_cmnd(struct ipr
 	ipr_reinit_ipr_cmnd(ipr_cmd);
 	ipr_cmd->u.scratch = 0;
 	ipr_cmd->sibling = NULL;
+	ipr_cmd->eh_comp = NULL;
 	ipr_cmd->fast_done = fast_done;
 	init_timer(&ipr_cmd->timer);
 }
@@ -848,6 +849,8 @@ static void ipr_scsi_eh_done(struct ipr_
 
 	scsi_dma_unmap(ipr_cmd->scsi_cmd);
 	scsi_cmd->scsi_done(scsi_cmd);
+	if (ipr_cmd->eh_comp)
+		complete(ipr_cmd->eh_comp);
 	list_add_tail(&ipr_cmd->queue, &ipr_cmd->hrrq->hrrq_free_q);
 }
 
@@ -4853,6 +4856,84 @@ static int ipr_slave_alloc(struct scsi_d
 	return rc;
 }
 
+/**
+ * ipr_match_lun - Match function for specified LUN
+ * @ipr_cmd:	ipr command struct
+ * @device:		device to match (sdev)
+ *
+ * Returns:
+ *	1 if command matches sdev / 0 if command does not match sdev
+ **/
+static int ipr_match_lun(struct ipr_cmnd *ipr_cmd, void *device)
+{
+	if (ipr_cmd->scsi_cmd && ipr_cmd->scsi_cmd->device == device)
+		return 1;
+	return 0;
+}
+
+/**
+ * ipr_wait_for_ops - Wait for matching commands to complete
+ * @ipr_cmd:	ipr command struct
+ * @device:		device to match (sdev)
+ * @match:		match function to use
+ *
+ * Returns:
+ *	SUCCESS / FAILED
+ **/
+static int ipr_wait_for_ops(struct ipr_ioa_cfg *ioa_cfg, void *device,
+			    int (*match)(struct ipr_cmnd *, void *))
+{
+	struct ipr_cmnd *ipr_cmd;
+	int wait;
+	unsigned long flags;
+	struct ipr_hrr_queue *hrrq;
+	signed long timeout = IPR_ABORT_TASK_TIMEOUT;
+	DECLARE_COMPLETION_ONSTACK(comp);
+
+	ENTER;
+	do {
+		wait = 0;
+
+		for_each_hrrq(hrrq, ioa_cfg) {
+			spin_lock_irqsave(hrrq->lock, flags);
+			list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) {
+				if (match(ipr_cmd, device)) {
+					ipr_cmd->eh_comp = &comp;
+					wait++;
+				}
+			}
+			spin_unlock_irqrestore(hrrq->lock, flags);
+		}
+
+		if (wait) {
+			timeout = wait_for_completion_timeout(&comp, timeout);
+
+			if (!timeout) {
+				wait = 0;
+
+				for_each_hrrq(hrrq, ioa_cfg) {
+					spin_lock_irqsave(hrrq->lock, flags);
+					list_for_each_entry(ipr_cmd, &hrrq->hrrq_pending_q, queue) {
+						if (match(ipr_cmd, device)) {
+							ipr_cmd->eh_comp = NULL;
+							wait++;
+						}
+					}
+					spin_unlock_irqrestore(hrrq->lock, flags);
+				}
+
+				if (wait)
+					dev_err(&ioa_cfg->pdev->dev, "Timed out waiting for aborted commands\n");
+				LEAVE;
+				return wait ? FAILED : SUCCESS;
+			}
+		}
+	} while (wait);
+
+	LEAVE;
+	return SUCCESS;
+}
+
 static int ipr_eh_host_reset(struct scsi_cmnd *cmd)
 {
 	struct ipr_ioa_cfg *ioa_cfg;
@@ -5072,11 +5153,17 @@ static int __ipr_eh_dev_reset(struct scs
 static int ipr_eh_dev_reset(struct scsi_cmnd *cmd)
 {
 	int rc;
+	struct ipr_ioa_cfg *ioa_cfg;
+
+	ioa_cfg = (struct ipr_ioa_cfg *) cmd->device->host->hostdata;
 
 	spin_lock_irq(cmd->device->host->host_lock);
 	rc = __ipr_eh_dev_reset(cmd);
 	spin_unlock_irq(cmd->device->host->host_lock);
 
+	if (rc == SUCCESS)
+		rc = ipr_wait_for_ops(ioa_cfg, cmd->device, ipr_match_lun);
+
 	return rc;
 }
 
@@ -5254,13 +5341,18 @@ static int ipr_eh_abort(struct scsi_cmnd
 {
 	unsigned long flags;
 	int rc;
+	struct ipr_ioa_cfg *ioa_cfg;
 
 	ENTER;
 
+	ioa_cfg = (struct ipr_ioa_cfg *) scsi_cmd->device->host->hostdata;
+
 	spin_lock_irqsave(scsi_cmd->device->host->host_lock, flags);
 	rc = ipr_cancel_op(scsi_cmd);
 	spin_unlock_irqrestore(scsi_cmd->device->host->host_lock, flags);
 
+	if (rc == SUCCESS)
+		rc = ipr_wait_for_ops(ioa_cfg, scsi_cmd->device, ipr_match_lun);
 	LEAVE;
 	return rc;
 }
--- a/drivers/scsi/ipr.h
+++ b/drivers/scsi/ipr.h
@@ -1608,6 +1608,7 @@ struct ipr_cmnd {
 		struct scsi_device *sdev;
 	} u;
 
+	struct completion *eh_comp;
 	struct ipr_hrr_queue *hrrq;
 	struct ipr_ioa_cfg *ioa_cfg;
 };



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 25/61] [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (23 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 24/61] ipr: wait for aborted command responses Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 26/61] [media] vb2: fix vb2_thread_stop race conditions Greg Kroah-Hartman
                   ` (37 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Matthias Schwarzott, Antti Palosaari,
	Hans Verkuil, Mauro Carvalho Chehab

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Matthias Schwarzott <zzam@gentoo.org>

commit 721f3223f26bbe81c7e55f84188e74d99df50a16 upstream.

Unconditionally attaching Si2161/Si2165 demod driver
breaks Hauppauge WinTV Starburst.
So create own card entry for this.

Add card name comments to the subsystem ids.

This fixes a regression introduced in 3.17 by
36efec48e2e6016e05364906720a0ec350a5d768 ([media] cx23885: Add si2165 support for HVR-5500)

Signed-off-by: Matthias Schwarzott <zzam@gentoo.org>
Tested-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/pci/cx23885/cx23885-cards.c |   23 +++++++++++++++++------
 drivers/media/pci/cx23885/cx23885-dvb.c   |   11 +++++++++++
 drivers/media/pci/cx23885/cx23885.h       |    1 +
 3 files changed, 29 insertions(+), 6 deletions(-)

--- a/drivers/media/pci/cx23885/cx23885-cards.c
+++ b/drivers/media/pci/cx23885/cx23885-cards.c
@@ -614,7 +614,7 @@ struct cx23885_board cx23885_boards[] =
 		.portb		= CX23885_MPEG_DVB,
 	},
 	[CX23885_BOARD_HAUPPAUGE_HVR4400] = {
-		.name		= "Hauppauge WinTV-HVR4400",
+		.name		= "Hauppauge WinTV-HVR4400/HVR5500",
 		.porta		= CX23885_ANALOG_VIDEO,
 		.portb		= CX23885_MPEG_DVB,
 		.portc		= CX23885_MPEG_DVB,
@@ -622,6 +622,10 @@ struct cx23885_board cx23885_boards[] =
 		.tuner_addr	= 0x60, /* 0xc0 >> 1 */
 		.tuner_bus	= 1,
 	},
+	[CX23885_BOARD_HAUPPAUGE_STARBURST] = {
+		.name		= "Hauppauge WinTV Starburst",
+		.portb		= CX23885_MPEG_DVB,
+	},
 	[CX23885_BOARD_AVERMEDIA_HC81R] = {
 		.name		= "AVerTV Hybrid Express Slim HC81R",
 		.tuner_type	= TUNER_XC2028,
@@ -910,19 +914,19 @@ struct cx23885_subid cx23885_subids[] =
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc108,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-4400 (Model 121xxx, Hybrid DVB-T/S2, IR) */
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc138,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc12a,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_STARBURST, /* Hauppauge WinTV Starburst (Model 121x00, DVB-S2, IR) */
 	}, {
 		.subvendor = 0x0070,
 		.subdevice = 0xc1f8,
-		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400,
+		.card      = CX23885_BOARD_HAUPPAUGE_HVR4400, /* Hauppauge WinTV HVR-5500 (Model 121xxx, Hybrid DVB-T/C/S2, IR) */
 	}, {
 		.subvendor = 0x1461,
 		.subdevice = 0xd939,
@@ -1495,8 +1499,9 @@ void cx23885_gpio_setup(struct cx23885_d
 		cx_write(GPIO_ISM, 0x00000000);/* INTERRUPTS active low*/
 		break;
 	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
 		/* GPIO-8 tda10071 demod reset */
-		/* GPIO-9 si2165 demod reset */
+		/* GPIO-9 si2165 demod reset (only HVR4400/HVR5500)*/
 
 		/* Put the parts into reset and back */
 		cx23885_gpio_enable(dev, GPIO_8 | GPIO_9, 1);
@@ -1760,6 +1765,7 @@ void cx23885_card_setup(struct cx23885_d
 	case CX23885_BOARD_HAUPPAUGE_HVR1850:
 	case CX23885_BOARD_HAUPPAUGE_HVR1290:
 	case CX23885_BOARD_HAUPPAUGE_HVR4400:
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
 	case CX23885_BOARD_HAUPPAUGE_IMPACTVCBE:
 		if (dev->i2c_bus[0].i2c_rc == 0)
 			hauppauge_eeprom(dev, eeprom+0xc0);
@@ -1864,6 +1870,11 @@ void cx23885_card_setup(struct cx23885_d
 		ts2->ts_clk_en_val = 0x1; /* Enable TS_CLK */
 		ts2->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
 		break;
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+		ts1->gen_ctrl_val  = 0xc; /* Serial bus + punctured clock */
+		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
+		ts1->src_sel_val   = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO;
+		break;
 	case CX23885_BOARD_DVBSKY_T9580:
 		ts1->gen_ctrl_val  = 0x5; /* Parallel */
 		ts1->ts_clk_en_val = 0x1; /* Enable TS_CLK */
--- a/drivers/media/pci/cx23885/cx23885-dvb.c
+++ b/drivers/media/pci/cx23885/cx23885-dvb.c
@@ -1586,6 +1586,17 @@ static int dvb_register(struct cx23885_t
 			break;
 		}
 		break;
+	case CX23885_BOARD_HAUPPAUGE_STARBURST:
+		i2c_bus = &dev->i2c_bus[0];
+		fe0->dvb.frontend = dvb_attach(tda10071_attach,
+						&hauppauge_tda10071_config,
+						&i2c_bus->i2c_adap);
+		if (fe0->dvb.frontend != NULL) {
+			dvb_attach(a8293_attach, fe0->dvb.frontend,
+				   &i2c_bus->i2c_adap,
+				   &hauppauge_a8293_config);
+		}
+		break;
 	case CX23885_BOARD_DVBSKY_T9580:
 		i2c_bus = &dev->i2c_bus[0];
 		i2c_bus2 = &dev->i2c_bus[1];
--- a/drivers/media/pci/cx23885/cx23885.h
+++ b/drivers/media/pci/cx23885/cx23885.h
@@ -93,6 +93,7 @@
 #define CX23885_BOARD_HAUPPAUGE_IMPACTVCBE     43
 #define CX23885_BOARD_DVICO_FUSIONHDTV_DVB_T_DUAL_EXP2 44
 #define CX23885_BOARD_DVBSKY_T9580             45
+#define CX23885_BOARD_HAUPPAUGE_STARBURST      52
 
 #define GPIO_0 0x00000001
 #define GPIO_1 0x00000002



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 26/61] [media] vb2: fix vb2_thread_stop race conditions
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (24 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 25/61] [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 27/61] dm cache: share cache-metadata object across inactive and active DM tables Greg Kroah-Hartman
                   ` (36 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Hans Verkuil, Mauro Carvalho Chehab

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Hans Verkuil <hans.verkuil@cisco.com>

commit 6cf11ee6300f38b7cfc43af9b7be2afaa5e05869 upstream.

The locking scheme inside the vb2 thread is unsafe when stopping the
thread. In particular kthread_stop was called *after* internal data
structures were cleaned up instead of doing that before. In addition,
internal vb2 functions were called after threadio->stop was set to
true and vb2_internal_streamoff was called. This is also not allowed.

All this led to a variety of race conditions and kernel warnings and/or
oopses.

Fixed by moving the kthread_stop call up before the cleanup takes
place, and by checking threadio->stop before calling internal vb2
queuing operations.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/media/v4l2-core/videobuf2-core.c |   19 +++++++++----------
 1 file changed, 9 insertions(+), 10 deletions(-)

--- a/drivers/media/v4l2-core/videobuf2-core.c
+++ b/drivers/media/v4l2-core/videobuf2-core.c
@@ -3142,27 +3142,26 @@ static int vb2_thread(void *data)
 			prequeue--;
 		} else {
 			call_void_qop(q, wait_finish, q);
-			ret = vb2_internal_dqbuf(q, &fileio->b, 0);
+			if (!threadio->stop)
+				ret = vb2_internal_dqbuf(q, &fileio->b, 0);
 			call_void_qop(q, wait_prepare, q);
 			dprintk(5, "file io: vb2_dqbuf result: %d\n", ret);
 		}
-		if (threadio->stop)
-			break;
-		if (ret)
+		if (ret || threadio->stop)
 			break;
 		try_to_freeze();
 
 		vb = q->bufs[fileio->b.index];
 		if (!(fileio->b.flags & V4L2_BUF_FLAG_ERROR))
-			ret = threadio->fnc(vb, threadio->priv);
-		if (ret)
-			break;
+			if (threadio->fnc(vb, threadio->priv))
+				break;
 		call_void_qop(q, wait_finish, q);
 		if (set_timestamp)
 			v4l2_get_timestamp(&fileio->b.timestamp);
-		ret = vb2_internal_qbuf(q, &fileio->b);
+		if (!threadio->stop)
+			ret = vb2_internal_qbuf(q, &fileio->b);
 		call_void_qop(q, wait_prepare, q);
-		if (ret)
+		if (ret || threadio->stop)
 			break;
 	}
 
@@ -3231,11 +3230,11 @@ int vb2_thread_stop(struct vb2_queue *q)
 	threadio->stop = true;
 	vb2_internal_streamoff(q, q->type);
 	call_void_qop(q, wait_prepare, q);
+	err = kthread_stop(threadio->thread);
 	q->fileio = NULL;
 	fileio->req.count = 0;
 	vb2_reqbufs(q, &fileio->req);
 	kfree(fileio);
-	err = kthread_stop(threadio->thread);
 	threadio->thread = NULL;
 	kfree(threadio);
 	q->fileio = NULL;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 27/61] dm cache: share cache-metadata object across inactive and active DM tables
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (25 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 26/61] [media] vb2: fix vb2_thread_stop race conditions Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 28/61] dm cache: fix problematic dual use of a single migration count variable Greg Kroah-Hartman
                   ` (35 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Joe Thornber, Mike Snitzer

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit 9b1cc9f251affdd27f29fe46d0989ba76c33faf6 upstream.

If a DM table is reloaded with an inactive table when the device is not
suspended (normal procedure for LVM2), then there will be two dm-bufio
objects that can diverge.  This can lead to a situation where the
inactive table uses bufio to read metadata at the same time the active
table writes metadata -- resulting in the inactive table having stale
metadata buffers once it is promoted to the active table slot.

Fix this by using reference counting and a global list of cache metadata
objects to ensure there is only one metadata object per metadata device.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-cache-metadata.c |  101 ++++++++++++++++++++++++++++++++++++++---
 1 file changed, 95 insertions(+), 6 deletions(-)

--- a/drivers/md/dm-cache-metadata.c
+++ b/drivers/md/dm-cache-metadata.c
@@ -94,6 +94,9 @@ struct cache_disk_superblock {
 } __packed;
 
 struct dm_cache_metadata {
+	atomic_t ref_count;
+	struct list_head list;
+
 	struct block_device *bdev;
 	struct dm_block_manager *bm;
 	struct dm_space_map *metadata_sm;
@@ -669,10 +672,10 @@ static void unpack_value(__le64 value_le
 
 /*----------------------------------------------------------------*/
 
-struct dm_cache_metadata *dm_cache_metadata_open(struct block_device *bdev,
-						 sector_t data_block_size,
-						 bool may_format_device,
-						 size_t policy_hint_size)
+static struct dm_cache_metadata *metadata_open(struct block_device *bdev,
+					       sector_t data_block_size,
+					       bool may_format_device,
+					       size_t policy_hint_size)
 {
 	int r;
 	struct dm_cache_metadata *cmd;
@@ -683,6 +686,7 @@ struct dm_cache_metadata *dm_cache_metad
 		return NULL;
 	}
 
+	atomic_set(&cmd->ref_count, 1);
 	init_rwsem(&cmd->root_lock);
 	cmd->bdev = bdev;
 	cmd->data_block_size = data_block_size;
@@ -705,10 +709,95 @@ struct dm_cache_metadata *dm_cache_metad
 	return cmd;
 }
 
+/*
+ * We keep a little list of ref counted metadata objects to prevent two
+ * different target instances creating separate bufio instances.  This is
+ * an issue if a table is reloaded before the suspend.
+ */
+static DEFINE_MUTEX(table_lock);
+static LIST_HEAD(table);
+
+static struct dm_cache_metadata *lookup(struct block_device *bdev)
+{
+	struct dm_cache_metadata *cmd;
+
+	list_for_each_entry(cmd, &table, list)
+		if (cmd->bdev == bdev) {
+			atomic_inc(&cmd->ref_count);
+			return cmd;
+		}
+
+	return NULL;
+}
+
+static struct dm_cache_metadata *lookup_or_open(struct block_device *bdev,
+						sector_t data_block_size,
+						bool may_format_device,
+						size_t policy_hint_size)
+{
+	struct dm_cache_metadata *cmd, *cmd2;
+
+	mutex_lock(&table_lock);
+	cmd = lookup(bdev);
+	mutex_unlock(&table_lock);
+
+	if (cmd)
+		return cmd;
+
+	cmd = metadata_open(bdev, data_block_size, may_format_device, policy_hint_size);
+	if (cmd) {
+		mutex_lock(&table_lock);
+		cmd2 = lookup(bdev);
+		if (cmd2) {
+			mutex_unlock(&table_lock);
+			__destroy_persistent_data_objects(cmd);
+			kfree(cmd);
+			return cmd2;
+		}
+		list_add(&cmd->list, &table);
+		mutex_unlock(&table_lock);
+	}
+
+	return cmd;
+}
+
+static bool same_params(struct dm_cache_metadata *cmd, sector_t data_block_size)
+{
+	if (cmd->data_block_size != data_block_size) {
+		DMERR("data_block_size (%llu) different from that in metadata (%llu)\n",
+		      (unsigned long long) data_block_size,
+		      (unsigned long long) cmd->data_block_size);
+		return false;
+	}
+
+	return true;
+}
+
+struct dm_cache_metadata *dm_cache_metadata_open(struct block_device *bdev,
+						 sector_t data_block_size,
+						 bool may_format_device,
+						 size_t policy_hint_size)
+{
+	struct dm_cache_metadata *cmd = lookup_or_open(bdev, data_block_size,
+						       may_format_device, policy_hint_size);
+	if (cmd && !same_params(cmd, data_block_size)) {
+		dm_cache_metadata_close(cmd);
+		return NULL;
+	}
+
+	return cmd;
+}
+
 void dm_cache_metadata_close(struct dm_cache_metadata *cmd)
 {
-	__destroy_persistent_data_objects(cmd);
-	kfree(cmd);
+	if (atomic_dec_and_test(&cmd->ref_count)) {
+		mutex_lock(&table_lock);
+		list_del(&cmd->list);
+		mutex_unlock(&table_lock);
+
+		__destroy_persistent_data_objects(cmd);
+		kfree(cmd);
+	}
 }
 
 /*



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 28/61] dm cache: fix problematic dual use of a single migration count variable
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (26 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 27/61] dm cache: share cache-metadata object across inactive and active DM tables Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 29/61] irqchip: omap-intc: Fix legacy DMA regression Greg Kroah-Hartman
                   ` (34 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Joe Thornber, Mike Snitzer

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Joe Thornber <ejt@redhat.com>

commit a59db67656021fa212e9b95a583f13c34eb67cd9 upstream.

Introduce a new variable to count the number of allocated migration
structures.  The existing variable cache->nr_migrations became
overloaded.  It was used to:

 i) track of the number of migrations in flight for the purposes of
    quiescing during suspend.

 ii) to estimate the amount of background IO occuring.

Recent discard changes meant that REQ_DISCARD bios are processed with
a migration.  Discards are not background IO so nr_migrations was not
incremented.  However this could cause quiescing to complete early.

(i) is now handled with a new variable cache->nr_allocated_migrations.
cache->nr_migrations has been renamed cache->nr_io_migrations.
cleanup_migration() is now called free_io_migration(), since it
decrements that variable.

Also, remove the unused cache->next_migration variable that got replaced
with with prealloc_structs a while ago.

Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/md/dm-cache-target.c |   89 ++++++++++++++++++++++++-------------------
 1 file changed, 50 insertions(+), 39 deletions(-)

--- a/drivers/md/dm-cache-target.c
+++ b/drivers/md/dm-cache-target.c
@@ -222,7 +222,13 @@ struct cache {
 	struct list_head need_commit_migrations;
 	sector_t migration_threshold;
 	wait_queue_head_t migration_wait;
-	atomic_t nr_migrations;
+	atomic_t nr_allocated_migrations;
+
+	/*
+	 * The number of in flight migrations that are performing
+	 * background io. eg, promotion, writeback.
+	 */
+	atomic_t nr_io_migrations;
 
 	wait_queue_head_t quiescing_wait;
 	atomic_t quiescing;
@@ -258,7 +264,6 @@ struct cache {
 	struct dm_deferred_set *all_io_ds;
 
 	mempool_t *migration_pool;
-	struct dm_cache_migration *next_migration;
 
 	struct dm_cache_policy *policy;
 	unsigned policy_nr_args;
@@ -349,10 +354,31 @@ static void free_prison_cell(struct cach
 	dm_bio_prison_free_cell(cache->prison, cell);
 }
 
+static struct dm_cache_migration *alloc_migration(struct cache *cache)
+{
+	struct dm_cache_migration *mg;
+
+	mg = mempool_alloc(cache->migration_pool, GFP_NOWAIT);
+	if (mg) {
+		mg->cache = cache;
+		atomic_inc(&mg->cache->nr_allocated_migrations);
+	}
+
+	return mg;
+}
+
+static void free_migration(struct dm_cache_migration *mg)
+{
+	if (atomic_dec_and_test(&mg->cache->nr_allocated_migrations))
+		wake_up(&mg->cache->migration_wait);
+
+	mempool_free(mg, mg->cache->migration_pool);
+}
+
 static int prealloc_data_structs(struct cache *cache, struct prealloc *p)
 {
 	if (!p->mg) {
-		p->mg = mempool_alloc(cache->migration_pool, GFP_NOWAIT);
+		p->mg = alloc_migration(cache);
 		if (!p->mg)
 			return -ENOMEM;
 	}
@@ -381,7 +407,7 @@ static void prealloc_free_structs(struct
 		free_prison_cell(cache, p->cell1);
 
 	if (p->mg)
-		mempool_free(p->mg, cache->migration_pool);
+		free_migration(p->mg);
 }
 
 static struct dm_cache_migration *prealloc_get_migration(struct prealloc *p)
@@ -817,24 +843,14 @@ static void remap_to_origin_then_cache(s
  * Migration covers moving data from the origin device to the cache, or
  * vice versa.
  *--------------------------------------------------------------*/
-static void free_migration(struct dm_cache_migration *mg)
-{
-	mempool_free(mg, mg->cache->migration_pool);
-}
-
-static void inc_nr_migrations(struct cache *cache)
+static void inc_io_migrations(struct cache *cache)
 {
-	atomic_inc(&cache->nr_migrations);
+	atomic_inc(&cache->nr_io_migrations);
 }
 
-static void dec_nr_migrations(struct cache *cache)
+static void dec_io_migrations(struct cache *cache)
 {
-	atomic_dec(&cache->nr_migrations);
-
-	/*
-	 * Wake the worker in case we're suspending the target.
-	 */
-	wake_up(&cache->migration_wait);
+	atomic_dec(&cache->nr_io_migrations);
 }
 
 static void __cell_defer(struct cache *cache, struct dm_bio_prison_cell *cell,
@@ -857,11 +873,10 @@ static void cell_defer(struct cache *cac
 	wake_worker(cache);
 }
 
-static void cleanup_migration(struct dm_cache_migration *mg)
+static void free_io_migration(struct dm_cache_migration *mg)
 {
-	struct cache *cache = mg->cache;
+	dec_io_migrations(mg->cache);
 	free_migration(mg);
-	dec_nr_migrations(cache);
 }
 
 static void migration_failure(struct dm_cache_migration *mg)
@@ -886,7 +901,7 @@ static void migration_failure(struct dm_
 		cell_defer(cache, mg->new_ocell, true);
 	}
 
-	cleanup_migration(mg);
+	free_io_migration(mg);
 }
 
 static void migration_success_pre_commit(struct dm_cache_migration *mg)
@@ -897,7 +912,7 @@ static void migration_success_pre_commit
 	if (mg->writeback) {
 		clear_dirty(cache, mg->old_oblock, mg->cblock);
 		cell_defer(cache, mg->old_ocell, false);
-		cleanup_migration(mg);
+		free_io_migration(mg);
 		return;
 
 	} else if (mg->demote) {
@@ -907,14 +922,14 @@ static void migration_success_pre_commit
 					     mg->old_oblock);
 			if (mg->promote)
 				cell_defer(cache, mg->new_ocell, true);
-			cleanup_migration(mg);
+			free_io_migration(mg);
 			return;
 		}
 	} else {
 		if (dm_cache_insert_mapping(cache->cmd, mg->cblock, mg->new_oblock)) {
 			DMWARN_LIMIT("promotion failed; couldn't update on disk metadata");
 			policy_remove_mapping(cache->policy, mg->new_oblock);
-			cleanup_migration(mg);
+			free_io_migration(mg);
 			return;
 		}
 	}
@@ -947,7 +962,7 @@ static void migration_success_post_commi
 		} else {
 			if (mg->invalidate)
 				policy_remove_mapping(cache->policy, mg->old_oblock);
-			cleanup_migration(mg);
+			free_io_migration(mg);
 		}
 
 	} else {
@@ -962,7 +977,7 @@ static void migration_success_post_commi
 			bio_endio(mg->new_ocell->holder, 0);
 			cell_defer(cache, mg->new_ocell, false);
 		}
-		cleanup_migration(mg);
+		free_io_migration(mg);
 	}
 }
 
@@ -1178,7 +1193,7 @@ static void promote(struct cache *cache,
 	mg->new_ocell = cell;
 	mg->start_jiffies = jiffies;
 
-	inc_nr_migrations(cache);
+	inc_io_migrations(cache);
 	quiesce_migration(mg);
 }
 
@@ -1201,7 +1216,7 @@ static void writeback(struct cache *cach
 	mg->new_ocell = NULL;
 	mg->start_jiffies = jiffies;
 
-	inc_nr_migrations(cache);
+	inc_io_migrations(cache);
 	quiesce_migration(mg);
 }
 
@@ -1227,7 +1242,7 @@ static void demote_then_promote(struct c
 	mg->new_ocell = new_ocell;
 	mg->start_jiffies = jiffies;
 
-	inc_nr_migrations(cache);
+	inc_io_migrations(cache);
 	quiesce_migration(mg);
 }
 
@@ -1254,7 +1269,7 @@ static void invalidate(struct cache *cac
 	mg->new_ocell = NULL;
 	mg->start_jiffies = jiffies;
 
-	inc_nr_migrations(cache);
+	inc_io_migrations(cache);
 	quiesce_migration(mg);
 }
 
@@ -1320,7 +1335,7 @@ static void process_discard_bio(struct c
 
 static bool spare_migration_bandwidth(struct cache *cache)
 {
-	sector_t current_volume = (atomic_read(&cache->nr_migrations) + 1) *
+	sector_t current_volume = (atomic_read(&cache->nr_io_migrations) + 1) *
 		cache->sectors_per_block;
 	return current_volume < cache->migration_threshold;
 }
@@ -1670,7 +1685,7 @@ static void stop_quiescing(struct cache
 
 static void wait_for_migrations(struct cache *cache)
 {
-	wait_event(cache->migration_wait, !atomic_read(&cache->nr_migrations));
+	wait_event(cache->migration_wait, !atomic_read(&cache->nr_allocated_migrations));
 }
 
 static void stop_worker(struct cache *cache)
@@ -1782,9 +1797,6 @@ static void destroy(struct cache *cache)
 {
 	unsigned i;
 
-	if (cache->next_migration)
-		mempool_free(cache->next_migration, cache->migration_pool);
-
 	if (cache->migration_pool)
 		mempool_destroy(cache->migration_pool);
 
@@ -2292,7 +2304,8 @@ static int cache_create(struct cache_arg
 	INIT_LIST_HEAD(&cache->quiesced_migrations);
 	INIT_LIST_HEAD(&cache->completed_migrations);
 	INIT_LIST_HEAD(&cache->need_commit_migrations);
-	atomic_set(&cache->nr_migrations, 0);
+	atomic_set(&cache->nr_allocated_migrations, 0);
+	atomic_set(&cache->nr_io_migrations, 0);
 	init_waitqueue_head(&cache->migration_wait);
 
 	init_waitqueue_head(&cache->quiescing_wait);
@@ -2351,8 +2364,6 @@ static int cache_create(struct cache_arg
 		goto bad;
 	}
 
-	cache->next_migration = NULL;
-
 	cache->need_tick_bio = true;
 	cache->sized = false;
 	cache->invalidate = false;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 29/61] irqchip: omap-intc: Fix legacy DMA regression
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (27 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 28/61] dm cache: fix problematic dual use of a single migration count variable Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 30/61] time: settimeofday: Validate the values of tv from user Greg Kroah-Hartman
                   ` (33 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Aaro Koskinen, Tony Lindgren,
	Felipe Balbi, Jason Cooper

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Felipe Balbi <balbi@ti.com>

commit 4b149e417463bbb6d1d9b805f729627ca2b54495 upstream.

commit 55601c9f2467 (arm: omap: intc: switch over
to linear irq domain) introduced a regression with
SDMA legacy driver because that driver strictly depends
on INTC's IRQs starting at NR_IRQs. Aparently
irq_domain_add_linear() won't guarantee that, since we see
a 7 IRQs difference when booting with and without the
commit cited above.

Until arch/arm/plat-omap/dma.c is properly fixed, we
must maintain OMAP2/3 using irq_domain_add_legacy().

A FIXME note was added so people know to delete that
code once that legacy DMA driver is fixed up.

Fixes: 55601c9f2467 (arm: omap: intc: switch over to linear irq domain)
Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Link: https://lkml.kernel.org/r/1420576688-10604-1-git-send-email-balbi@ti.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/irqchip/irq-omap-intc.c b/drivers/irqchip/irq-omap-intc.c
index 28718d3e8281..c03f140acbae 100644
--- a/drivers/irqchip/irq-omap-intc.c
+++ b/drivers/irqchip/irq-omap-intc.c
@@ -263,7 +263,7 @@ static int __init omap_init_irq_of(struct device_node *node)
 	return ret;
 }
 
-static int __init omap_init_irq_legacy(u32 base)
+static int __init omap_init_irq_legacy(u32 base, struct device_node *node)
 {
 	int j, irq_base;
 
@@ -277,7 +277,7 @@ static int __init omap_init_irq_legacy(u32 base)
 		irq_base = 0;
 	}
 
-	domain = irq_domain_add_legacy(NULL, omap_nr_irqs, irq_base, 0,
+	domain = irq_domain_add_legacy(node, omap_nr_irqs, irq_base, 0,
 			&irq_domain_simple_ops, NULL);
 
 	omap_irq_soft_reset();
@@ -301,10 +301,26 @@ static int __init omap_init_irq(u32 base, struct device_node *node)
 {
 	int ret;
 
-	if (node)
+	/*
+	 * FIXME legacy OMAP DMA driver sitting under arch/arm/plat-omap/dma.c
+	 * depends is still not ready for linear IRQ domains; because of that
+	 * we need to temporarily "blacklist" OMAP2 and OMAP3 devices from using
+	 * linear IRQ Domain until that driver is finally fixed.
+	 */
+	if (of_device_is_compatible(node, "ti,omap2-intc") ||
+			of_device_is_compatible(node, "ti,omap3-intc")) {
+		struct resource res;
+
+		if (of_address_to_resource(node, 0, &res))
+			return -ENOMEM;
+
+		base = res.start;
+		ret = omap_init_irq_legacy(base, node);
+	} else if (node) {
 		ret = omap_init_irq_of(node);
-	else
-		ret = omap_init_irq_legacy(base);
+	} else {
+		ret = omap_init_irq_legacy(base, NULL);
+	}
 
 	if (ret == 0)
 		omap_irq_enable_protection();



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 30/61] time: settimeofday: Validate the values of tv from user
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (28 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 29/61] irqchip: omap-intc: Fix legacy DMA regression Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 31/61] time: adjtimex: Validate the ADJ_FREQUENCY values Greg Kroah-Hartman
                   ` (32 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Thomas Gleixner, Ingo Molnar,
	Sasha Levin, John Stultz

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit 6ada1fc0e1c4775de0e043e1bd3ae9d065491aa5 upstream.

An unvalidated user input is multiplied by a constant, which can result in
an undefined behaviour for large values. While this is validated later,
we should avoid triggering undefined behaviour.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: include trivial milisecond->microsecond correction noticed
by Andy]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/time.h |   13 +++++++++++++
 kernel/time/time.c   |    4 ++++
 2 files changed, 17 insertions(+)

--- a/include/linux/time.h
+++ b/include/linux/time.h
@@ -99,6 +99,19 @@ static inline bool timespec_valid_strict
 	return true;
 }
 
+static inline bool timeval_valid(const struct timeval *tv)
+{
+	/* Dates before 1970 are bogus */
+	if (tv->tv_sec < 0)
+		return false;
+
+	/* Can't have more microseconds then a second */
+	if (tv->tv_usec < 0 || tv->tv_usec >= USEC_PER_SEC)
+		return false;
+
+	return true;
+}
+
 extern struct timespec timespec_trunc(struct timespec t, unsigned gran);
 
 #define CURRENT_TIME		(current_kernel_time())
--- a/kernel/time/time.c
+++ b/kernel/time/time.c
@@ -196,6 +196,10 @@ SYSCALL_DEFINE2(settimeofday, struct tim
 	if (tv) {
 		if (copy_from_user(&user_tv, tv, sizeof(*tv)))
 			return -EFAULT;
+
+		if (!timeval_valid(&user_tv))
+			return -EINVAL;
+
 		new_ts.tv_sec = user_tv.tv_sec;
 		new_ts.tv_nsec = user_tv.tv_usec * NSEC_PER_USEC;
 	}



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 31/61] time: adjtimex: Validate the ADJ_FREQUENCY values
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (29 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 30/61] time: settimeofday: Validate the values of tv from user Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 32/61] ARM: dts: imx25: Fix PWM "per" clocks Greg Kroah-Hartman
                   ` (31 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Thomas Gleixner, Ingo Molnar,
	Sasha Levin, John Stultz

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit 5e5aeb4367b450a28f447f6d5ab57d8f2ab16a5f upstream.

Verify that the frequency value from userspace is valid and makes sense.

Unverified values can cause overflows later on.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
[jstultz: Fix up bug for negative values and drop redunent cap check]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 kernel/time/ntp.c |    7 +++++++
 1 file changed, 7 insertions(+)

--- a/kernel/time/ntp.c
+++ b/kernel/time/ntp.c
@@ -633,6 +633,13 @@ int ntp_validate_timex(struct timex *txc
 	if ((txc->modes & ADJ_SETOFFSET) && (!capable(CAP_SYS_TIME)))
 		return -EPERM;
 
+	if (txc->modes & ADJ_FREQUENCY) {
+		if (LONG_MIN / PPM_SCALE > txc->freq)
+			return -EINVAL;
+		if (LONG_MAX / PPM_SCALE < txc->freq)
+			return -EINVAL;
+	}
+
 	return 0;
 }
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 32/61] ARM: dts: imx25: Fix PWM "per" clocks
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (30 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 31/61] time: adjtimex: Validate the ADJ_FREQUENCY values Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 33/61] ARM: mvebu: completely disable hardware I/O coherency Greg Kroah-Hartman
                   ` (30 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Carlos Soto, Fabio Estevam, Shawn Guo

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Fabio Estevam <fabio.estevam@freescale.com>

commit 7ecd0bde5bfea524a843ad8fa8cb66ccbce68779 upstream.

Currently PWM functionality is broken on mx25 due to the wrong assignment of the
PWM "per" clock.

According to Documentation/devicetree/bindings/clock/imx25-clock.txt:
	pwm_ipg_per		52

,so update the pwm "per" to use 'pwm_ipg_per' instead of 'per10' clock.

With this change PWM can work fine on mx25.

Reported-by: Carlos Soto <csotoalonso@gmail.com>
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/boot/dts/imx25.dtsi |    8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

--- a/arch/arm/boot/dts/imx25.dtsi
+++ b/arch/arm/boot/dts/imx25.dtsi
@@ -369,7 +369,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa0000 0x4000>;
-				clocks = <&clks 106>, <&clks 36>;
+				clocks = <&clks 106>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <36>;
 			};
@@ -388,7 +388,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fa8000 0x4000>;
-				clocks = <&clks 107>, <&clks 36>;
+				clocks = <&clks 107>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <41>;
 			};
@@ -429,7 +429,7 @@
 			pwm4: pwm@53fc8000 {
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				reg = <0x53fc8000 0x4000>;
-				clocks = <&clks 108>, <&clks 36>;
+				clocks = <&clks 108>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <42>;
 			};
@@ -476,7 +476,7 @@
 				compatible = "fsl,imx25-pwm", "fsl,imx27-pwm";
 				#pwm-cells = <2>;
 				reg = <0x53fe0000 0x4000>;
-				clocks = <&clks 105>, <&clks 36>;
+				clocks = <&clks 105>, <&clks 52>;
 				clock-names = "ipg", "per";
 				interrupts = <26>;
 			};



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 33/61] ARM: mvebu: completely disable hardware I/O coherency
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (31 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 32/61] ARM: dts: imx25: Fix PWM "per" clocks Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 34/61] bus: mvebu-mbus: fix support of MBus window 13 Greg Kroah-Hartman
                   ` (29 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thomas Petazzoni, Andrew Lunn

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>

commit 8f1e8ee28660018a935c7576b9af8ffe1feab54c upstream.

The current hardware I/O coherency is known to cause problems with DMA
coherent buffers, as it still requires explicit I/O synchronization
barriers, which is not compatible with the semantics expected by the
Linux DMA coherent buffers API.

So, in order to have enough time to validate a new solution based on
automatic I/O synchronization barriers, this commit disables hardware
I/O coherency entirely. Future patches will re-enable it.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/mach-mvebu/coherency.c |    7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

--- a/arch/arm/mach-mvebu/coherency.c
+++ b/arch/arm/mach-mvebu/coherency.c
@@ -398,9 +398,14 @@ static int coherency_type(void)
 	return type;
 }
 
+/*
+ * As a precaution, we currently completely disable hardware I/O
+ * coherency, until enough testing is done with automatic I/O
+ * synchronization barriers to validate that it is a proper solution.
+ */
 int coherency_available(void)
 {
-	return coherency_type() != COHERENCY_FABRIC_TYPE_NONE;
+	return false;
 }
 
 int __init coherency_init(void)



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 34/61] bus: mvebu-mbus: fix support of MBus window 13
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (32 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 33/61] ARM: mvebu: completely disable hardware I/O coherency Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 35/61] fix deadlock in cifs_ioctl_clone() Greg Kroah-Hartman
                   ` (28 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Thomas Petazzoni, Andrew Lunn

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andrew Lunn <andrew@lunn.ch>

commit 38bdf45f4aa5cb6186d50a29e6cbbd9d486a1519 upstream.

On Armada XP, 375 and 38x the MBus window 13 has the remap capability,
like windows 0 to 7. However, the mvebu-mbus driver isn't currently
taking into account this special case, which means that when window 13
is actually used, the remap registers are left to 0, making the device
using this MBus window unavailable.

As a minimal fix for stable, don't use window 13. A full fix will
follow later.

Fixes: fddddb52a6c ("bus: introduce an Marvell EBU MBus driver")
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/bus/mvebu-mbus.c |   13 +++++++++++++
 1 file changed, 13 insertions(+)

--- a/drivers/bus/mvebu-mbus.c
+++ b/drivers/bus/mvebu-mbus.c
@@ -182,12 +182,25 @@ static void mvebu_mbus_disable_window(st
 }
 
 /* Checks whether the given window number is available */
+
+/* On Armada XP, 375 and 38x the MBus window 13 has the remap
+ * capability, like windows 0 to 7. However, the mvebu-mbus driver
+ * isn't currently taking into account this special case, which means
+ * that when window 13 is actually used, the remap registers are left
+ * to 0, making the device using this MBus window unavailable. The
+ * quick fix for stable is to not use window 13. A follow up patch
+ * will correctly handle this window.
+*/
 static int mvebu_mbus_window_is_free(struct mvebu_mbus_state *mbus,
 				     const int win)
 {
 	void __iomem *addr = mbus->mbuswins_base +
 		mbus->soc->win_cfg_offset(win);
 	u32 ctrl = readl(addr + WIN_CTRL_OFF);
+
+	if (win == 13)
+		return false;
+
 	return !(ctrl & WIN_CTRL_ENABLE);
 }
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 35/61] fix deadlock in cifs_ioctl_clone()
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (33 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 34/61] bus: mvebu-mbus: fix support of MBus window 13 Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 36/61] irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type Greg Kroah-Hartman
                   ` (27 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Al Viro

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Al Viro <viro@zeniv.linux.org.uk>

commit 378ff1a53b5724f3ac97b0aba3c9ecac072f6fcd upstream.

It really needs to check that src is non-directory *and* use
{un,}lock_two_nodirectories().  As it is, it's trivial to cause
double-lock (ioctl(fd, CIFS_IOC_COPYCHUNK_FILE, fd)) and if the
last argument is an fd of directory, we are asking for trouble
by violating the locking order - all directories go before all
non-directories.  If the last argument is an fd of parent
directory, it has 50% odds of locking child before parent,
which will cause AB-BA deadlock if we race with unlink().

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 fs/cifs/ioctl.c |   21 +++++----------------
 1 file changed, 5 insertions(+), 16 deletions(-)

--- a/fs/cifs/ioctl.c
+++ b/fs/cifs/ioctl.c
@@ -86,21 +86,16 @@ static long cifs_ioctl_clone(unsigned in
 	}
 
 	src_inode = file_inode(src_file.file);
+	rc = -EINVAL;
+	if (S_ISDIR(src_inode->i_mode))
+		goto out_fput;
 
 	/*
 	 * Note: cifs case is easier than btrfs since server responsible for
 	 * checks for proper open modes and file type and if it wants
 	 * server could even support copy of range where source = target
 	 */
-
-	/* so we do not deadlock racing two ioctls on same files */
-	if (target_inode < src_inode) {
-		mutex_lock_nested(&target_inode->i_mutex, I_MUTEX_PARENT);
-		mutex_lock_nested(&src_inode->i_mutex, I_MUTEX_CHILD);
-	} else {
-		mutex_lock_nested(&src_inode->i_mutex, I_MUTEX_PARENT);
-		mutex_lock_nested(&target_inode->i_mutex, I_MUTEX_CHILD);
-	}
+	lock_two_nondirectories(target_inode, src_inode);
 
 	/* determine range to clone */
 	rc = -EINVAL;
@@ -124,13 +119,7 @@ static long cifs_ioctl_clone(unsigned in
 out_unlock:
 	/* although unlocking in the reverse order from locking is not
 	   strictly necessary here it is a little cleaner to be consistent */
-	if (target_inode < src_inode) {
-		mutex_unlock(&src_inode->i_mutex);
-		mutex_unlock(&target_inode->i_mutex);
-	} else {
-		mutex_unlock(&target_inode->i_mutex);
-		mutex_unlock(&src_inode->i_mutex);
-	}
+	unlock_two_nondirectories(src_inode, target_inode);
 out_fput:
 	fdput(src_file);
 out_drop_write:



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 36/61] irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (34 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 35/61] fix deadlock in cifs_ioctl_clone() Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 37/61] x86, irq: Properly tag virtualization entry in /proc/interrupts Greg Kroah-Hartman
                   ` (26 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Gavin Li, Boris Brezillon,
	Nicolas Ferre, Jason Cooper

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Gavin Li <git@thegavinli.com>

commit 91d1179212161f220938198b742c328ad38fd0a3 upstream.

This patch makes the bitmask for AIC_SRCTYPE consistent
with that of its valid values, and prevents the priority
field at bits 2:0 from being clobbered by an incorrect
AND with the AIC_SRCTYPE mask.

Signed-off-by: Gavin Li <gavinli@thegavinli.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Link: https://lkml.kernel.org/r/1420598843-8409-1-git-send-email-gavinli@thegavinli.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/irqchip/irq-atmel-aic-common.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/irqchip/irq-atmel-aic-common.c
+++ b/drivers/irqchip/irq-atmel-aic-common.c
@@ -28,7 +28,7 @@
 #define AT91_AIC_IRQ_MIN_PRIORITY	0
 #define AT91_AIC_IRQ_MAX_PRIORITY	7
 
-#define AT91_AIC_SRCTYPE		GENMASK(7, 6)
+#define AT91_AIC_SRCTYPE		GENMASK(6, 5)
 #define AT91_AIC_SRCTYPE_LOW		(0 << 5)
 #define AT91_AIC_SRCTYPE_FALLING	(1 << 5)
 #define AT91_AIC_SRCTYPE_HIGH		(2 << 5)
@@ -74,7 +74,7 @@ int aic_common_set_type(struct irq_data
 		return -EINVAL;
 	}
 
-	*val &= AT91_AIC_SRCTYPE;
+	*val &= ~AT91_AIC_SRCTYPE;
 	*val |= aic_type;
 
 	return 0;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 37/61] x86, irq: Properly tag virtualization entry in /proc/interrupts
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (35 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 36/61] irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 38/61] clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write Greg Kroah-Hartman
                   ` (25 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Jan Beulich, Thomas Gleixner

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Jan Beulich <JBeulich@suse.com>

commit 4a0d3107d6b19125f21172c2b7d95f9c30ecaf6f upstream.

The mis-naming likely was a copy-and-paste effect.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Link: http://lkml.kernel.org/r/54B9408B0200007800055E8B@mail.emea.novell.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/irq.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/irq.c
+++ b/arch/x86/kernel/irq.c
@@ -127,7 +127,7 @@ int arch_show_interrupts(struct seq_file
 	seq_printf(p, "  Machine check polls\n");
 #endif
 #if IS_ENABLED(CONFIG_HYPERV) || defined(CONFIG_XEN)
-	seq_printf(p, "%*s: ", prec, "THR");
+	seq_printf(p, "%*s: ", prec, "HYP");
 	for_each_online_cpu(j)
 		seq_printf(p, "%10u ", irq_stats(j)->irq_hv_callback_count);
 	seq_printf(p, "  Hypervisor callback interrupts\n");



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 38/61] clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (36 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 37/61] x86, irq: Properly tag virtualization entry in /proc/interrupts Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 39/61] x86, hyperv: Mark the Hyper-V clocksource as being continuous Greg Kroah-Hartman
                   ` (24 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kukjin Kim, GP Orcullo,
	Doug Anderson, Tobias Jakobi, Daniel Lezcano

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>

commit 8c38d28ba8da98f7102c31d35359b4dbe9d1f329 upstream.

EXYNOS4_MCT_L_MASK is defined as 0xffffff00, so applying this bitmask
produces a number outside the range 0x00 to 0xff, which always results
in execution of the default switch statement.

Obviously this is wrong and git history shows that the bitmask inversion
was incorrectly set during a refactoring of the MCT code.

Fix this by putting the inversion at the correct position again.

Acked-by: Kukjin Kim <kgene.kim@samsung.com>
Reported-by: GP Orcullo <kinsamanka@gmail.com>
Reviewed-by: Doug Anderson <dianders@chromium.org>
Signed-off-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/clocksource/exynos_mct.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/drivers/clocksource/exynos_mct.c
+++ b/drivers/clocksource/exynos_mct.c
@@ -97,8 +97,8 @@ static void exynos4_mct_write(unsigned i
 	writel_relaxed(value, reg_base + offset);
 
 	if (likely(offset >= EXYNOS4_MCT_L_BASE(0))) {
-		stat_addr = (offset & ~EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
-		switch (offset & EXYNOS4_MCT_L_MASK) {
+		stat_addr = (offset & EXYNOS4_MCT_L_MASK) + MCT_L_WSTAT_OFFSET;
+		switch (offset & ~EXYNOS4_MCT_L_MASK) {
 		case MCT_L_TCON_OFFSET:
 			mask = 1 << 3;		/* L_TCON write status */
 			break;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 39/61] x86, hyperv: Mark the Hyper-V clocksource as being continuous
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (37 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 38/61] clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 40/61] x86/tsc: Change Fast TSC calibration failed from error to info Greg Kroah-Hartman
                   ` (23 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, K. Y. Srinivasan, jasowang, devel,
	olaf, apw, Thomas Gleixner

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "K. Y. Srinivasan" <kys@microsoft.com>

commit 32c6590d126836a062b3140ed52d898507987017 upstream.

The Hyper-V clocksource is continuous; mark it accordingly.

Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Acked-by: jasowang@redhat.com
Cc: gregkh@linuxfoundation.org
Cc: devel@linuxdriverproject.org
Cc: olaf@aepfle.de
Cc: apw@canonical.com
Link: http://lkml.kernel.org/r/1421108762-3331-1-git-send-email-kys@microsoft.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/cpu/mshyperv.c |    1 +
 1 file changed, 1 insertion(+)

--- a/arch/x86/kernel/cpu/mshyperv.c
+++ b/arch/x86/kernel/cpu/mshyperv.c
@@ -107,6 +107,7 @@ static struct clocksource hyperv_cs = {
 	.rating		= 400, /* use this when running on Hyperv*/
 	.read		= read_hv_clock,
 	.mask		= CLOCKSOURCE_MASK(64),
+	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
 static void __init ms_hyperv_init_platform(void)



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 40/61] x86/tsc: Change Fast TSC calibration failed from error to info
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (38 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 39/61] x86, hyperv: Mark the Hyper-V clocksource as being continuous Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 41/61] x86, boot: Skip relocs when load address unchanged Greg Kroah-Hartman
                   ` (22 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Alexandre Demers, Thomas Gleixner

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Alexandre Demers <alexandre.f.demers@gmail.com>

commit 520452172e6b318f3a8bd9d4fe1e25066393de25 upstream.

Many users see this message when booting without knowning that it is
of no importance and that TSC calibration may have succeeded by
another way.

As explained by Paul Bolle in
http://lkml.kernel.org/r/1348488259.1436.22.camel@x61.thuisdomein

  "Fast TSC calibration failed" should not be considered as an error
  since other calibration methods are being tried afterward. At most,
  those send a warning if they fail (not an error). So let's change
  the message from error to warning.

[ tglx: Make if pr_info. It's really not important at all ]

Fixes: c767a54ba065 x86/debug: Add KERN_<LEVEL> to bare printks, convert printks to pr_<level>
Signed-off-by: Alexandre Demers <alexandre.f.demers@gmail.com>
Link: http://lkml.kernel.org/r/1418106470-6906-1-git-send-email-alexandre.f.demers@gmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kernel/tsc.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -617,7 +617,7 @@ static unsigned long quick_pit_calibrate
 			goto success;
 		}
 	}
-	pr_err("Fast TSC calibration failed\n");
+	pr_info("Fast TSC calibration failed\n");
 	return 0;
 
 success:



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 41/61] x86, boot: Skip relocs when load address unchanged
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (39 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 40/61] x86/tsc: Change Fast TSC calibration failed from error to info Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 42/61] KVM: x86: SYSENTER emulation is broken Greg Kroah-Hartman
                   ` (21 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Baoquan He, Kees Cook, Thomas D.,
	Vivek Goyal, Jan Beulich, Junjie Mao, Andi Kleen,
	Thomas Gleixner

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit f285f4a21c3253887caceed493089ece17579d59 upstream.

On 64-bit, relocation is not required unless the load address gets
changed. Without this, relocations do unexpected things when the kernel
is above 4G.

Reported-by: Baoquan He <bhe@redhat.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Thomas D. <whissi@whissi.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Jan Beulich <JBeulich@suse.com>
Cc: Junjie Mao <eternal.n08@gmail.com>
Cc: Andi Kleen <ak@linux.intel.com>
Link: http://lkml.kernel.org/r/20150116005146.GA4212@www.outflux.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/boot/compressed/misc.c |    9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -361,6 +361,8 @@ asmlinkage __visible void *decompress_ke
 				  unsigned long output_len,
 				  unsigned long run_size)
 {
+	unsigned char *output_orig = output;
+
 	real_mode = rmode;
 
 	sanitize_boot_params(real_mode);
@@ -409,7 +411,12 @@ asmlinkage __visible void *decompress_ke
 	debug_putstr("\nDecompressing Linux... ");
 	decompress(input_data, input_len, NULL, NULL, output, NULL, error);
 	parse_elf(output);
-	handle_relocations(output, output_len);
+	/*
+	 * 32-bit always performs relocations. 64-bit relocations are only
+	 * needed if kASLR has chosen a different load address.
+	 */
+	if (!IS_ENABLED(CONFIG_X86_64) || output != output_orig)
+		handle_relocations(output, output_len);
 	debug_putstr("done.\nBooting the kernel.\n");
 	return output;
 }



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 42/61] KVM: x86: SYSENTER emulation is broken
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (40 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 41/61] x86, boot: Skip relocs when load address unchanged Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 43/61] KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 Greg Kroah-Hartman
                   ` (20 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Nadav Amit, Paolo Bonzini

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <namit@cs.technion.ac.il>

commit f3747379accba8e95d70cec0eae0582c8c182050 upstream.

SYSENTER emulation is broken in several ways:
1. It misses the case of 16-bit code segments completely (CVE-2015-0239).
2. MSR_IA32_SYSENTER_CS is checked in 64-bit mode incorrectly (bits 0 and 1 can
   still be set without causing #GP).
3. MSR_IA32_SYSENTER_EIP and MSR_IA32_SYSENTER_ESP are not masked in
   legacy-mode.
4. There is some unneeded code.

Fix it.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/emulate.c |   27 ++++++++-------------------
 1 file changed, 8 insertions(+), 19 deletions(-)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -2345,7 +2345,7 @@ static int em_sysenter(struct x86_emulat
 	 * Not recognized on AMD in compat mode (but is recognized in legacy
 	 * mode).
 	 */
-	if ((ctxt->mode == X86EMUL_MODE_PROT32) && (efer & EFER_LMA)
+	if ((ctxt->mode != X86EMUL_MODE_PROT64) && (efer & EFER_LMA)
 	    && !vendor_intel(ctxt))
 		return emulate_ud(ctxt);
 
@@ -2358,25 +2358,13 @@ static int em_sysenter(struct x86_emulat
 	setup_syscalls_segments(ctxt, &cs, &ss);
 
 	ops->get_msr(ctxt, MSR_IA32_SYSENTER_CS, &msr_data);
-	switch (ctxt->mode) {
-	case X86EMUL_MODE_PROT32:
-		if ((msr_data & 0xfffc) == 0x0)
-			return emulate_gp(ctxt, 0);
-		break;
-	case X86EMUL_MODE_PROT64:
-		if (msr_data == 0x0)
-			return emulate_gp(ctxt, 0);
-		break;
-	default:
-		break;
-	}
+	if ((msr_data & 0xfffc) == 0x0)
+		return emulate_gp(ctxt, 0);
 
 	ctxt->eflags &= ~(EFLG_VM | EFLG_IF);
-	cs_sel = (u16)msr_data;
-	cs_sel &= ~SELECTOR_RPL_MASK;
+	cs_sel = (u16)msr_data & ~SELECTOR_RPL_MASK;
 	ss_sel = cs_sel + 8;
-	ss_sel &= ~SELECTOR_RPL_MASK;
-	if (ctxt->mode == X86EMUL_MODE_PROT64 || (efer & EFER_LMA)) {
+	if (efer & EFER_LMA) {
 		cs.d = 0;
 		cs.l = 1;
 	}
@@ -2385,10 +2373,11 @@ static int em_sysenter(struct x86_emulat
 	ops->set_segment(ctxt, ss_sel, &ss, 0, VCPU_SREG_SS);
 
 	ops->get_msr(ctxt, MSR_IA32_SYSENTER_EIP, &msr_data);
-	ctxt->_eip = msr_data;
+	ctxt->_eip = (efer & EFER_LMA) ? msr_data : (u32)msr_data;
 
 	ops->get_msr(ctxt, MSR_IA32_SYSENTER_ESP, &msr_data);
-	*reg_write(ctxt, VCPU_REGS_RSP) = msr_data;
+	*reg_write(ctxt, VCPU_REGS_RSP) = (efer & EFER_LMA) ? msr_data :
+							      (u32)msr_data;
 
 	return X86EMUL_CONTINUE;
 }



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 43/61] KVM: x86: Fix of previously incomplete fix for CVE-2014-8480
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (41 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 42/61] KVM: x86: SYSENTER emulation is broken Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 44/61] x86, tls, ldt: Stop checking lm in LDT_empty Greg Kroah-Hartman
                   ` (19 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Nadav Amit, Paolo Bonzini

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Nadav Amit <nadav.amit@gmail.com>

commit 63ea0a49ae0b145b91ff2b070c01b66fc75854b9 upstream.

STR and SLDT with rip-relative operand can cause a host kernel oops.
Mark them as DstMem as well.

Signed-off-by: Nadav Amit <namit@cs.technion.ac.il>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/kvm/emulate.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/arch/x86/kvm/emulate.c
+++ b/arch/x86/kvm/emulate.c
@@ -3777,8 +3777,8 @@ static const struct opcode group5[] = {
 };
 
 static const struct opcode group6[] = {
-	DI(Prot,	sldt),
-	DI(Prot,	str),
+	DI(Prot | DstMem,	sldt),
+	DI(Prot | DstMem,	str),
 	II(Prot | Priv | SrcMem16, em_lldt, lldt),
 	II(Prot | Priv | SrcMem16, em_ltr, ltr),
 	N, N, N, N,



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 44/61] x86, tls, ldt: Stop checking lm in LDT_empty
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (42 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 43/61] KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 45/61] x86, tls: Interpret an all-zero struct user_desc as "no segment" Greg Kroah-Hartman
                   ` (18 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, torvalds, Thomas Gleixner

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@amacapital.net>

commit e30ab185c490e9a9381385529e0fd32f0a399495 upstream.

32-bit programs don't have an lm bit in their ABI, so they can't
reliably cause LDT_empty to return true without resorting to memset.
They shouldn't need to do this.

This should fix a longstanding, if minor, issue in all 64-bit kernels
as well as a potential regression in the TLS hardening code.

Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/72a059de55e86ad5e2935c80aa91880ddf19d07c.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/desc.h |    9 ++-------
 1 file changed, 2 insertions(+), 7 deletions(-)

--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -251,7 +251,8 @@ static inline void native_load_tls(struc
 		gdt[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i];
 }
 
-#define _LDT_empty(info)				\
+/* This intentionally ignores lm, since 32-bit apps don't have that field. */
+#define LDT_empty(info)					\
 	((info)->base_addr		== 0	&&	\
 	 (info)->limit			== 0	&&	\
 	 (info)->contents		== 0	&&	\
@@ -261,12 +262,6 @@ static inline void native_load_tls(struc
 	 (info)->seg_not_present	== 1	&&	\
 	 (info)->useable		== 0)
 
-#ifdef CONFIG_X86_64
-#define LDT_empty(info) (_LDT_empty(info) && ((info)->lm == 0))
-#else
-#define LDT_empty(info) (_LDT_empty(info))
-#endif
-
 static inline void clear_LDT(void)
 {
 	set_ldt(NULL, 0);



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 45/61] x86, tls: Interpret an all-zero struct user_desc as "no segment"
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (43 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 44/61] x86, tls, ldt: Stop checking lm in LDT_empty Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 46/61] x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 Greg Kroah-Hartman
                   ` (17 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Andy Lutomirski, torvalds, Thomas Gleixner

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Lutomirski <luto@amacapital.net>

commit 3669ef9fa7d35f573ec9c0e0341b29251c2734a7 upstream.

The Witcher 2 did something like this to allocate a TLS segment index:

        struct user_desc u_info;
        bzero(&u_info, sizeof(u_info));
        u_info.entry_number = (uint32_t)-1;

        syscall(SYS_set_thread_area, &u_info);

Strictly speaking, this code was never correct.  It should have set
read_exec_only and seg_not_present to 1 to indicate that it wanted
to find a free slot without putting anything there, or it should
have put something sensible in the TLS slot if it wanted to allocate
a TLS entry for real.  The actual effect of this code was to
allocate a bogus segment that could be used to exploit espfix.

The set_thread_area hardening patches changed the behavior, causing
set_thread_area to return -EINVAL and crashing the game.

This changes set_thread_area to interpret this as a request to find
a free slot and to leave it empty, which isn't *quite* what the game
expects but should be close enough to keep it working.  In
particular, using the code above to allocate two segments will
allocate the same segment both times.

According to FrostbittenKing on Github, this fixes The Witcher 2.

If this somehow still causes problems, we could instead allocate
a limit==0 32-bit data segment, but that seems rather ugly to me.

Fixes: 41bdc78544b8 x86/tls: Validate TLS entries to protect espfix
Signed-off-by: Andy Lutomirski <luto@amacapital.net>
Cc: torvalds@linux-foundation.org
Link: http://lkml.kernel.org/r/0cb251abe1ff0958b8e468a9a9a905b80ae3a746.1421954363.git.luto@amacapital.net
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/include/asm/desc.h |   13 +++++++++++++
 arch/x86/kernel/tls.c       |   25 +++++++++++++++++++++++--
 2 files changed, 36 insertions(+), 2 deletions(-)

--- a/arch/x86/include/asm/desc.h
+++ b/arch/x86/include/asm/desc.h
@@ -262,6 +262,19 @@ static inline void native_load_tls(struc
 	 (info)->seg_not_present	== 1	&&	\
 	 (info)->useable		== 0)
 
+/* Lots of programs expect an all-zero user_desc to mean "no segment at all". */
+static inline bool LDT_zero(const struct user_desc *info)
+{
+	return (info->base_addr		== 0 &&
+		info->limit		== 0 &&
+		info->contents		== 0 &&
+		info->read_exec_only	== 0 &&
+		info->seg_32bit		== 0 &&
+		info->limit_in_pages	== 0 &&
+		info->seg_not_present	== 0 &&
+		info->useable		== 0);
+}
+
 static inline void clear_LDT(void)
 {
 	set_ldt(NULL, 0);
--- a/arch/x86/kernel/tls.c
+++ b/arch/x86/kernel/tls.c
@@ -29,7 +29,28 @@ static int get_free_idx(void)
 
 static bool tls_desc_okay(const struct user_desc *info)
 {
-	if (LDT_empty(info))
+	/*
+	 * For historical reasons (i.e. no one ever documented how any
+	 * of the segmentation APIs work), user programs can and do
+	 * assume that a struct user_desc that's all zeros except for
+	 * entry_number means "no segment at all".  This never actually
+	 * worked.  In fact, up to Linux 3.19, a struct user_desc like
+	 * this would create a 16-bit read-write segment with base and
+	 * limit both equal to zero.
+	 *
+	 * That was close enough to "no segment at all" until we
+	 * hardened this function to disallow 16-bit TLS segments.  Fix
+	 * it up by interpreting these zeroed segments the way that they
+	 * were almost certainly intended to be interpreted.
+	 *
+	 * The correct way to ask for "no segment at all" is to specify
+	 * a user_desc that satisfies LDT_empty.  To keep everything
+	 * working, we accept both.
+	 *
+	 * Note that there's a similar kludge in modify_ldt -- look at
+	 * the distinction between modes 1 and 0x11.
+	 */
+	if (LDT_empty(info) || LDT_zero(info))
 		return true;
 
 	/*
@@ -71,7 +92,7 @@ static void set_tls_desc(struct task_str
 	cpu = get_cpu();
 
 	while (n-- > 0) {
-		if (LDT_empty(info))
+		if (LDT_empty(info) || LDT_zero(info))
 			desc->a = desc->b = 0;
 		else
 			fill_ldt(desc, info);



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 46/61] x86/apic: Re-enable PCI_MSI support for non-SMP X86_32
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (44 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 45/61] x86, tls: Interpret an all-zero struct user_desc as "no segment" Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:26 ` [PATCH 3.18 47/61] sata_dwc_460ex: fix resource leak on error path Greg Kroah-Hartman
                   ` (16 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Bryan ODonoghue, Thomas Gleixner,
	Andy Shevchenko, Thomas Petazzoni

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Bryan O'Donoghue <pure.logic@nexus-software.ie>

commit 38a1dfda8e77d7ba74c94d06d8bc41ba98a4bc8c upstream.

Commit 0dbc6078c06bc0 ('x86, build, pci: Fix PCI_MSI build on !SMP')
introduced the dependency that X86_UP_APIC is only available when
PCI_MSI is false. This effectively prevents PCI_MSI support on 32bit
UP systems because it disables both APIC and IO-APIC. But APIC support
is architecturally required for PCI_MSI.

The intention of the patch was to enforce APIC support when PCI_MSI is
enabled, but failed to do so.

Remove the !PCI_MSI dependency from X86_UP_APIC and enforce
X86_UP_APIC when PCI_MSI support is enabled on 32bit UP systems.

[ tglx: Massaged changelog ]

Fixes 0dbc6078c06bc0 'x86, build, pci: Fix PCI_MSI build on !SMP'
Signed-off-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: http://lkml.kernel.org/r/1421967529-9037-1-git-send-email-pure.logic@nexus-software.ie
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/Kconfig |    6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -856,7 +856,7 @@ source "kernel/Kconfig.preempt"
 
 config X86_UP_APIC
 	bool "Local APIC support on uniprocessors"
-	depends on X86_32 && !SMP && !X86_32_NON_STANDARD && !PCI_MSI
+	depends on X86_32 && !SMP && !X86_32_NON_STANDARD
 	---help---
 	  A local APIC (Advanced Programmable Interrupt Controller) is an
 	  integrated interrupt controller in the CPU. If you have a single-CPU
@@ -867,6 +867,10 @@ config X86_UP_APIC
 	  performance counters), and the NMI watchdog which detects hard
 	  lockups.
 
+config X86_UP_APIC_MSI
+	def_bool y
+	select X86_UP_APIC if X86_32 && !SMP && !X86_32_NON_STANDARD && PCI_MSI
+
 config X86_UP_IOAPIC
 	bool "IO-APIC support on uniprocessors"
 	depends on X86_UP_APIC



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 47/61] sata_dwc_460ex: fix resource leak on error path
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (45 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 46/61] x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 Greg Kroah-Hartman
@ 2015-01-28  1:26 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 48/61] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver Greg Kroah-Hartman
                   ` (15 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:26 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Andy Shevchenko, Tejun Heo

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

commit 4aaa71873ddb9faf4b0c4826579e2f6d18ff9ab4 upstream.

DMA mapped IO should be unmapped on the error path in probe() and
unconditionally on remove().

Fixes: 62936009f35a ([libata] Add 460EX on-chip SATA driver, sata_dwc_460ex)
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/sata_dwc_460ex.c |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

--- a/drivers/ata/sata_dwc_460ex.c
+++ b/drivers/ata/sata_dwc_460ex.c
@@ -797,7 +797,7 @@ static int dma_dwc_init(struct sata_dwc_
 	if (err) {
 		dev_err(host_pvt.dwc_dev, "%s: dma_request_interrupts returns"
 			" %d\n", __func__, err);
-		goto error_out;
+		return err;
 	}
 
 	/* Enabe DMA */
@@ -808,11 +808,6 @@ static int dma_dwc_init(struct sata_dwc_
 		sata_dma_regs);
 
 	return 0;
-
-error_out:
-	dma_dwc_exit(hsdev);
-
-	return err;
 }
 
 static int sata_dwc_scr_read(struct ata_link *link, unsigned int scr, u32 *val)
@@ -1662,7 +1657,7 @@ static int sata_dwc_probe(struct platfor
 	char *ver = (char *)&versionr;
 	u8 *base = NULL;
 	int err = 0;
-	int irq, rc;
+	int irq;
 	struct ata_host *host;
 	struct ata_port_info pi = sata_dwc_port_info[0];
 	const struct ata_port_info *ppi[] = { &pi, NULL };
@@ -1725,7 +1720,7 @@ static int sata_dwc_probe(struct platfor
 	if (irq == NO_IRQ) {
 		dev_err(&ofdev->dev, "no SATA DMA irq\n");
 		err = -ENODEV;
-		goto error_out;
+		goto error_iomap;
 	}
 
 	/* Get physical SATA DMA register base address */
@@ -1734,14 +1729,16 @@ static int sata_dwc_probe(struct platfor
 		dev_err(&ofdev->dev, "ioremap failed for AHBDMA register"
 			" address\n");
 		err = -ENODEV;
-		goto error_out;
+		goto error_iomap;
 	}
 
 	/* Save dev for later use in dev_xxx() routines */
 	host_pvt.dwc_dev = &ofdev->dev;
 
 	/* Initialize AHB DMAC */
-	dma_dwc_init(hsdev, irq);
+	err = dma_dwc_init(hsdev, irq);
+	if (err)
+		goto error_dma_iomap;
 
 	/* Enable SATA Interrupts */
 	sata_dwc_enable_interrupts(hsdev);
@@ -1759,9 +1756,8 @@ static int sata_dwc_probe(struct platfor
 	 * device discovery process, invoking our port_start() handler &
 	 * error_handler() to execute a dummy Softreset EH session
 	 */
-	rc = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
-
-	if (rc != 0)
+	err = ata_host_activate(host, irq, sata_dwc_isr, 0, &sata_dwc_sht);
+	if (err)
 		dev_err(&ofdev->dev, "failed to activate host");
 
 	dev_set_drvdata(&ofdev->dev, host);
@@ -1770,7 +1766,8 @@ static int sata_dwc_probe(struct platfor
 error_out:
 	/* Free SATA DMA resources */
 	dma_dwc_exit(hsdev);
-
+error_dma_iomap:
+	iounmap((void __iomem *)host_pvt.sata_dma_regs);
 error_iomap:
 	iounmap(base);
 error_kmalloc:
@@ -1791,6 +1788,7 @@ static int sata_dwc_remove(struct platfo
 	/* Free SATA DMA resources */
 	dma_dwc_exit(hsdev);
 
+	iounmap((void __iomem *)host_pvt.sata_dma_regs);
 	iounmap(hsdev->reg_base);
 	kfree(hsdev);
 	kfree(host);



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 48/61] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver.
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (46 preceding siblings ...)
  2015-01-28  1:26 ` [PATCH 3.18 47/61] sata_dwc_460ex: fix resource leak on error path Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 49/61] KEYS: close race between key lookup and freeing Greg Kroah-Hartman
                   ` (14 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Suman Tripathi, Tejun Heo

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Suman Tripathi <stripathi@apm.com>

commit 5c0b8e0de76a86edb99e46612fd9d341b4c4fa0a upstream.

This patch fixes the big endian mode issue with function
xgene_ahci_read_id.

Signed-off-by: Suman Tripathi <stripathi@apm.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/ata/ahci_xgene.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/ata/ahci_xgene.c
+++ b/drivers/ata/ahci_xgene.c
@@ -188,7 +188,7 @@ static unsigned int xgene_ahci_read_id(s
 	 *
 	 * Clear reserved bit 8 (DEVSLP bit) as we don't support DEVSLP
 	 */
-	id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8);
+	id[ATA_ID_FEATURE_SUPP] &= cpu_to_le16(~(1 << 8));
 
 	return 0;
 }



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 49/61] KEYS: close race between key lookup and freeing
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (47 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 48/61] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 50/61] mm: get rid of radix tree gfp mask for pagecache_get_page Greg Kroah-Hartman
                   ` (13 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Sasha Levin, David Howells

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Sasha Levin <sasha.levin@oracle.com>

commit a3a8784454692dd72e5d5d34dcdab17b4420e74c upstream.

When a key is being garbage collected, it's key->user would get put before
the ->destroy() callback is called, where the key is removed from it's
respective tracking structures.

This leaves a key hanging in a semi-invalid state which leaves a window open
for a different task to try an access key->user. An example is
find_keyring_by_name() which would dereference key->user for a key that is
in the process of being garbage collected (where key->user was freed but
->destroy() wasn't called yet - so it's still present in the linked list).

This would cause either a panic, or corrupt memory.

Fixes CVE-2014-9529.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 security/keys/gc.c |    4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

--- a/security/keys/gc.c
+++ b/security/keys/gc.c
@@ -148,12 +148,12 @@ static noinline void key_gc_unused_keys(
 		if (test_bit(KEY_FLAG_INSTANTIATED, &key->flags))
 			atomic_dec(&key->user->nikeys);
 
-		key_user_put(key->user);
-
 		/* now throw away the key memory */
 		if (key->type->destroy)
 			key->type->destroy(key);
 
+		key_user_put(key->user);
+
 		kfree(key->description);
 
 #ifdef KEY_DEBUGGING



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 50/61] mm: get rid of radix tree gfp mask for pagecache_get_page
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (48 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 49/61] KEYS: close race between key lookup and freeing Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 51/61] netfilter: nfnetlink: validate nfnetlink header from batch Greg Kroah-Hartman
                   ` (12 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dave Chinner, Michal Hocko, Linus Torvalds

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Michal Hocko <mhocko@suse.cz>

commit 45f87de57f8fad59302fd263dd81ffa4843b5b24 upstream.

Commit 2457aec63745 ("mm: non-atomically mark page accessed during page
cache allocation where possible") has added a separate parameter for
specifying gfp mask for radix tree allocations.

Not only this is less than optimal from the API point of view because it
is error prone, it is also buggy currently because
grab_cache_page_write_begin is using GFP_KERNEL for radix tree and if
fgp_flags doesn't contain FGP_NOFS (mostly controlled by fs by
AOP_FLAG_NOFS flag) but the mapping_gfp_mask has __GFP_FS cleared then
the radix tree allocation wouldn't obey the restriction and might
recurse into filesystem and cause deadlocks.  This is the case for most
filesystems unfortunately because only ext4 and gfs2 are using
AOP_FLAG_NOFS.

Let's simply remove radix_gfp_mask parameter because the allocation
context is same for both page cache and for the radix tree.  Just make
sure that the radix tree gets only the sane subset of the mask (e.g.  do
not pass __GFP_WRITE).

Long term it is more preferable to convert remaining users of
AOP_FLAG_NOFS to use mapping_gfp_mask instead and simplify this
interface even further.

Reported-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 include/linux/pagemap.h |   13 ++++++-------
 mm/filemap.c            |   29 ++++++++++++-----------------
 2 files changed, 18 insertions(+), 24 deletions(-)

--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -251,7 +251,7 @@ pgoff_t page_cache_prev_hole(struct addr
 #define FGP_NOWAIT		0x00000020
 
 struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset,
-		int fgp_flags, gfp_t cache_gfp_mask, gfp_t radix_gfp_mask);
+		int fgp_flags, gfp_t cache_gfp_mask);
 
 /**
  * find_get_page - find and get a page reference
@@ -266,13 +266,13 @@ struct page *pagecache_get_page(struct a
 static inline struct page *find_get_page(struct address_space *mapping,
 					pgoff_t offset)
 {
-	return pagecache_get_page(mapping, offset, 0, 0, 0);
+	return pagecache_get_page(mapping, offset, 0, 0);
 }
 
 static inline struct page *find_get_page_flags(struct address_space *mapping,
 					pgoff_t offset, int fgp_flags)
 {
-	return pagecache_get_page(mapping, offset, fgp_flags, 0, 0);
+	return pagecache_get_page(mapping, offset, fgp_flags, 0);
 }
 
 /**
@@ -292,7 +292,7 @@ static inline struct page *find_get_page
 static inline struct page *find_lock_page(struct address_space *mapping,
 					pgoff_t offset)
 {
-	return pagecache_get_page(mapping, offset, FGP_LOCK, 0, 0);
+	return pagecache_get_page(mapping, offset, FGP_LOCK, 0);
 }
 
 /**
@@ -319,7 +319,7 @@ static inline struct page *find_or_creat
 {
 	return pagecache_get_page(mapping, offset,
 					FGP_LOCK|FGP_ACCESSED|FGP_CREAT,
-					gfp_mask, gfp_mask & GFP_RECLAIM_MASK);
+					gfp_mask);
 }
 
 /**
@@ -340,8 +340,7 @@ static inline struct page *grab_cache_pa
 {
 	return pagecache_get_page(mapping, index,
 			FGP_LOCK|FGP_CREAT|FGP_NOFS|FGP_NOWAIT,
-			mapping_gfp_mask(mapping),
-			GFP_NOFS);
+			mapping_gfp_mask(mapping));
 }
 
 struct page *find_get_entry(struct address_space *mapping, pgoff_t offset);
--- a/mm/filemap.c
+++ b/mm/filemap.c
@@ -1046,8 +1046,7 @@ EXPORT_SYMBOL(find_lock_entry);
  * @mapping: the address_space to search
  * @offset: the page index
  * @fgp_flags: PCG flags
- * @cache_gfp_mask: gfp mask to use for the page cache data page allocation
- * @radix_gfp_mask: gfp mask to use for radix tree node allocation
+ * @gfp_mask: gfp mask to use for the page cache data page allocation
  *
  * Looks up the page cache slot at @mapping & @offset.
  *
@@ -1056,11 +1055,9 @@ EXPORT_SYMBOL(find_lock_entry);
  * FGP_ACCESSED: the page will be marked accessed
  * FGP_LOCK: Page is return locked
  * FGP_CREAT: If page is not present then a new page is allocated using
- *		@cache_gfp_mask and added to the page cache and the VM's LRU
- *		list. If radix tree nodes are allocated during page cache
- *		insertion then @radix_gfp_mask is used. The page is returned
- *		locked and with an increased refcount. Otherwise, %NULL is
- *		returned.
+ *		@gfp_mask and added to the page cache and the VM's LRU
+ *		list. The page is returned locked and with an increased
+ *		refcount. Otherwise, %NULL is returned.
  *
  * If FGP_LOCK or FGP_CREAT are specified then the function may sleep even
  * if the GFP flags specified for FGP_CREAT are atomic.
@@ -1068,7 +1065,7 @@ EXPORT_SYMBOL(find_lock_entry);
  * If there is a page cache page, it is returned with an increased refcount.
  */
 struct page *pagecache_get_page(struct address_space *mapping, pgoff_t offset,
-	int fgp_flags, gfp_t cache_gfp_mask, gfp_t radix_gfp_mask)
+	int fgp_flags, gfp_t gfp_mask)
 {
 	struct page *page;
 
@@ -1105,13 +1102,11 @@ no_page:
 	if (!page && (fgp_flags & FGP_CREAT)) {
 		int err;
 		if ((fgp_flags & FGP_WRITE) && mapping_cap_account_dirty(mapping))
-			cache_gfp_mask |= __GFP_WRITE;
-		if (fgp_flags & FGP_NOFS) {
-			cache_gfp_mask &= ~__GFP_FS;
-			radix_gfp_mask &= ~__GFP_FS;
-		}
+			gfp_mask |= __GFP_WRITE;
+		if (fgp_flags & FGP_NOFS)
+			gfp_mask &= ~__GFP_FS;
 
-		page = __page_cache_alloc(cache_gfp_mask);
+		page = __page_cache_alloc(gfp_mask);
 		if (!page)
 			return NULL;
 
@@ -1122,7 +1117,8 @@ no_page:
 		if (fgp_flags & FGP_ACCESSED)
 			__SetPageReferenced(page);
 
-		err = add_to_page_cache_lru(page, mapping, offset, radix_gfp_mask);
+		err = add_to_page_cache_lru(page, mapping, offset,
+				gfp_mask & GFP_RECLAIM_MASK);
 		if (unlikely(err)) {
 			page_cache_release(page);
 			page = NULL;
@@ -2443,8 +2439,7 @@ struct page *grab_cache_page_write_begin
 		fgp_flags |= FGP_NOFS;
 
 	page = pagecache_get_page(mapping, index, fgp_flags,
-			mapping_gfp_mask(mapping),
-			GFP_KERNEL);
+			mapping_gfp_mask(mapping));
 	if (page)
 		wait_for_stable_page(page);
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 51/61] netfilter: nfnetlink: validate nfnetlink header from batch
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (49 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 50/61] mm: get rid of radix tree gfp mask for pagecache_get_page Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 52/61] netfilter: nf_tables: fix flush ruleset chain dependencies Greg Kroah-Hartman
                   ` (11 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 9ea2aa8b7dba9e99544c4187cc298face254569f upstream.

Make sure there is enough room for the nfnetlink header in the
netlink messages that are part of the batch. There is a similar
check in netlink_rcv_skb().

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nfnetlink.c |    3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -321,7 +321,8 @@ replay:
 		nlh = nlmsg_hdr(skb);
 		err = 0;
 
-		if (nlh->nlmsg_len < NLMSG_HDRLEN) {
+		if (nlmsg_len(nlh) < sizeof(struct nfgenmsg) ||
+		    skb->len < nlh->nlmsg_len) {
 			err = -EINVAL;
 			goto ack;
 		}



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 52/61] netfilter: nf_tables: fix flush ruleset chain dependencies
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (50 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 51/61] netfilter: nfnetlink: validate nfnetlink header from batch Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 53/61] netfilter: nfnetlink: relax strict multicast group check from netlink_bind Greg Kroah-Hartman
                   ` (10 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Asbjoern Sloth Toennesen, Pablo Neira Ayuso

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit a2f18db0c68fec96631c10cad9384c196e9008ac upstream.

Jumping between chains doesn't mix well with flush ruleset. Rules
from a different chain and set elements may still refer to us.

[  353.373791] ------------[ cut here ]------------
[  353.373845] kernel BUG at net/netfilter/nf_tables_api.c:1159!
[  353.373896] invalid opcode: 0000 [#1] SMP
[  353.373942] Modules linked in: intel_powerclamp uas iwldvm iwlwifi
[  353.374017] CPU: 0 PID: 6445 Comm: 31c3.nft Not tainted 3.18.0 #98
[  353.374069] Hardware name: LENOVO 5129CTO/5129CTO, BIOS 6QET47WW (1.17 ) 07/14/2010
[...]
[  353.375018] Call Trace:
[  353.375046]  [<ffffffff81964c31>] ? nf_tables_commit+0x381/0x540
[  353.375101]  [<ffffffff81949118>] nfnetlink_rcv+0x3d8/0x4b0
[  353.375150]  [<ffffffff81943fc5>] netlink_unicast+0x105/0x1a0
[  353.375200]  [<ffffffff8194438e>] netlink_sendmsg+0x32e/0x790
[  353.375253]  [<ffffffff818f398e>] sock_sendmsg+0x8e/0xc0
[  353.375300]  [<ffffffff818f36b9>] ? move_addr_to_kernel.part.20+0x19/0x70
[  353.375357]  [<ffffffff818f44f9>] ? move_addr_to_kernel+0x19/0x30
[  353.375410]  [<ffffffff819016d2>] ? verify_iovec+0x42/0xd0
[  353.375459]  [<ffffffff818f3e10>] ___sys_sendmsg+0x3f0/0x400
[  353.375510]  [<ffffffff810615fa>] ? native_sched_clock+0x2a/0x90
[  353.375563]  [<ffffffff81176697>] ? acct_account_cputime+0x17/0x20
[  353.375616]  [<ffffffff8110dc78>] ? account_user_time+0x88/0xa0
[  353.375667]  [<ffffffff818f4bbd>] __sys_sendmsg+0x3d/0x80
[  353.375719]  [<ffffffff81b184f4>] ? int_check_syscall_exit_work+0x34/0x3d
[  353.375776]  [<ffffffff818f4c0d>] SyS_sendmsg+0xd/0x20
[  353.375823]  [<ffffffff81b1826d>] system_call_fastpath+0x16/0x1b

Release objects in this order: rules -> sets -> chains -> tables, to
make sure no references to chains are held anymore.

Reported-by: Asbjoern Sloth Toennesen <asbjorn@asbjorn.biz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_tables_api.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

--- a/net/netfilter/nf_tables_api.c
+++ b/net/netfilter/nf_tables_api.c
@@ -713,16 +713,12 @@ static int nft_flush_table(struct nft_ct
 	struct nft_chain *chain, *nc;
 	struct nft_set *set, *ns;
 
-	list_for_each_entry_safe(chain, nc, &ctx->table->chains, list) {
+	list_for_each_entry(chain, &ctx->table->chains, list) {
 		ctx->chain = chain;
 
 		err = nft_delrule_by_chain(ctx);
 		if (err < 0)
 			goto out;
-
-		err = nft_delchain(ctx);
-		if (err < 0)
-			goto out;
 	}
 
 	list_for_each_entry_safe(set, ns, &ctx->table->sets, list) {
@@ -734,6 +730,14 @@ static int nft_flush_table(struct nft_ct
 		if (err < 0)
 			goto out;
 	}
+
+	list_for_each_entry_safe(chain, nc, &ctx->table->chains, list) {
+		ctx->chain = chain;
+
+		err = nft_delchain(ctx);
+		if (err < 0)
+			goto out;
+	}
 
 	err = nft_deltable(ctx);
 out:



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 53/61] netfilter: nfnetlink: relax strict multicast group check from netlink_bind
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (51 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 52/61] netfilter: nf_tables: fix flush ruleset chain dependencies Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 54/61] netfilter: conntrack: fix race between confirmation and flush Greg Kroah-Hartman
                   ` (9 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 62924af247e95de7041a6d6f2d06cdd05152e2dc upstream.

Relax the checking that was introduced in 97840cb ("netfilter:
nfnetlink: fix insufficient validation in nfnetlink_bind") when the
subscription bitmask is used. Existing userspace code code may request
to listen to all of the existing netlink groups by setting an all to one
subscription group bitmask. Netlink already validates subscription via
setsockopt() for us.

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nfnetlink.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/net/netfilter/nfnetlink.c
+++ b/net/netfilter/nfnetlink.c
@@ -470,7 +470,7 @@ static int nfnetlink_bind(int group)
 	int type;
 
 	if (group <= NFNLGRP_NONE || group > NFNLGRP_MAX)
-		return -EINVAL;
+		return 0;
 
 	type = nfnl_group2type[group];
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 54/61] netfilter: conntrack: fix race between confirmation and flush
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (52 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 53/61] netfilter: nfnetlink: relax strict multicast group check from netlink_bind Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 55/61] ipvs: uninitialized data with IP_VS_IPV6 Greg Kroah-Hartman
                   ` (8 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Pablo Neira Ayuso

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Pablo Neira Ayuso <pablo@netfilter.org>

commit 8ca3f5e974f2b4b7f711589f4abff920db36637a upstream.

Commit 5195c14c8b27c ("netfilter: conntrack: fix race in
__nf_conntrack_confirm against get_next_corpse") aimed to resolve the
race condition between the confirmation (packet path) and the flush
command (from control plane). However, it introduced a crash when
several packets race to add a new conntrack, which seems easier to
reproduce when nf_queue is in place.

Fix this race, in __nf_conntrack_confirm(), by removing the CT
from unconfirmed list before checking the DYING bit. In case
race occured, re-add the CT to the dying list

This patch also changes the verdict from NF_ACCEPT to NF_DROP when
we lose race. Basically, the confirmation happens for the first packet
that we see in a flow. If you just invoked conntrack -F once (which
should be the common case), then this is likely to be the first packet
of the flow (unless you already called flush anytime soon in the past).
This should be hard to trigger, but better drop this packet, otherwise
we leave things in inconsistent state since the destination will likely
reply to this packet, but it will find no conntrack, unless the origin
retransmits.

The change of the verdict has been discussed in:
https://www.marc.info/?l=linux-netdev&m=141588039530056&w=2

Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/nf_conntrack_core.c |   22 ++++++++++------------
 1 file changed, 10 insertions(+), 12 deletions(-)

--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -611,16 +611,15 @@ __nf_conntrack_confirm(struct sk_buff *s
 	 */
 	NF_CT_ASSERT(!nf_ct_is_confirmed(ct));
 	pr_debug("Confirming conntrack %p\n", ct);
-	/* We have to check the DYING flag inside the lock to prevent
-	   a race against nf_ct_get_next_corpse() possibly called from
-	   user context, else we insert an already 'dead' hash, blocking
-	   further use of that particular connection -JM */
-
-	if (unlikely(nf_ct_is_dying(ct))) {
-		nf_conntrack_double_unlock(hash, reply_hash);
-		local_bh_enable();
-		return NF_ACCEPT;
-	}
+	/* We have to check the DYING flag after unlink to prevent
+	 * a race against nf_ct_get_next_corpse() possibly called from
+	 * user context, else we insert an already 'dead' hash, blocking
+	 * further use of that particular connection -JM.
+	 */
+	nf_ct_del_from_dying_or_unconfirmed_list(ct);
+
+	if (unlikely(nf_ct_is_dying(ct)))
+		goto out;
 
 	/* See if there's one in the list already, including reverse:
 	   NAT could have grabbed it without realizing, since we're
@@ -636,8 +635,6 @@ __nf_conntrack_confirm(struct sk_buff *s
 		    zone == nf_ct_zone(nf_ct_tuplehash_to_ctrack(h)))
 			goto out;
 
-	nf_ct_del_from_dying_or_unconfirmed_list(ct);
-
 	/* Timer relative to confirmation time, not original
 	   setting time, otherwise we'd get timer wrap in
 	   weird delay cases. */
@@ -673,6 +670,7 @@ __nf_conntrack_confirm(struct sk_buff *s
 	return NF_ACCEPT;
 
 out:
+	nf_ct_add_to_dying_list(ct);
 	nf_conntrack_double_unlock(hash, reply_hash);
 	NF_CT_STAT_INC(net, insert_failed);
 	local_bh_enable();



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 55/61] ipvs: uninitialized data with IP_VS_IPV6
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (53 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 54/61] netfilter: conntrack: fix race between confirmation and flush Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 56/61] Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" Greg Kroah-Hartman
                   ` (7 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Dan Carpenter, Julian Anastasov,
	Simon Horman

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Dan Carpenter <dan.carpenter@oracle.com>

commit 3b05ac3824ed9648c0d9c02d51d9b54e4e7e874f upstream.

The app_tcp_pkt_out() function expects "*diff" to be set and ends up
using uninitialized data if CONFIG_IP_VS_IPV6 is turned on.

The same issue is there in app_tcp_pkt_in().  Thanks to Julian Anastasov
for noticing that.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 net/netfilter/ipvs/ip_vs_ftp.c |   10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

--- a/net/netfilter/ipvs/ip_vs_ftp.c
+++ b/net/netfilter/ipvs/ip_vs_ftp.c
@@ -183,6 +183,8 @@ static int ip_vs_ftp_out(struct ip_vs_ap
 	struct nf_conn *ct;
 	struct net *net;
 
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -191,8 +193,6 @@ static int ip_vs_ftp_out(struct ip_vs_ap
 		return 1;
 #endif
 
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;
@@ -322,6 +322,9 @@ static int ip_vs_ftp_in(struct ip_vs_app
 	struct ip_vs_conn *n_cp;
 	struct net *net;
 
+	/* no diff required for incoming packets */
+	*diff = 0;
+
 #ifdef CONFIG_IP_VS_IPV6
 	/* This application helper doesn't work with IPv6 yet,
 	 * so turn this into a no-op for IPv6 packets
@@ -330,9 +333,6 @@ static int ip_vs_ftp_in(struct ip_vs_app
 		return 1;
 #endif
 
-	/* no diff required for incoming packets */
-	*diff = 0;
-
 	/* Only useful for established sessions */
 	if (cp->state != IP_VS_TCP_S_ESTABLISHED)
 		return 1;



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 56/61] Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (54 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 55/61] ipvs: uninitialized data with IP_VS_IPV6 Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 57/61] iwlwifi: mvm: add a flag to enable match found notification Greg Kroah-Hartman
                   ` (6 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, David Vrabel, Stefano Stabellini

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Vrabel <david.vrabel@citrix.com>

commit dbdd74763f1faf799fbb9ed30423182e92919378 upstream.

This reverts commit 2c3fc8d26dd09b9d7069687eead849ee81c78e46.

This commit broke on x86 PV because entries in the generic SWIOTLB are
indexed using (pseudo-)physical address not DMA address and these are
not the same in a x86 PV guest.

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/xen/swiotlb-xen.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/xen/swiotlb-xen.c
+++ b/drivers/xen/swiotlb-xen.c
@@ -449,7 +449,7 @@ static void xen_unmap_single(struct devi
 
 	/* NOTE: We use dev_addr here, not paddr! */
 	if (is_xen_swiotlb_buffer(dev_addr)) {
-		swiotlb_tbl_unmap_single(hwdev, dev_addr, size, dir);
+		swiotlb_tbl_unmap_single(hwdev, paddr, size, dir);
 		return;
 	}
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 57/61] iwlwifi: mvm: add a flag to enable match found notification
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (55 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 56/61] Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 58/61] ACPI / PM: Do not disable wakeup GPEs that have not been enabled Greg Kroah-Hartman
                   ` (5 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, David Spinadel, Emmanuel Grumbach

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: David Spinadel <david.spinadel@intel.com>

commit 7e2a38831db4cf082aa8b4997f3cbfe8cb03b669 upstream.

Add a flag that enables match found notification to align with
FW API change.

Signed-off-by: David Spinadel <david.spinadel@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>


---
 drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h |    2 ++
 drivers/net/wireless/iwlwifi/mvm/scan.c        |    1 +
 2 files changed, 3 insertions(+)

--- a/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
+++ b/drivers/net/wireless/iwlwifi/mvm/fw-api-scan.h
@@ -672,6 +672,7 @@ struct iwl_scan_channel_opt {
  * @IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED: all passive scans will be fragmented
  * @IWL_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED: insert WFA vendor-specific TPC report
  *	and DS parameter set IEs into probe requests.
+ * @IWL_MVM_LMAC_SCAN_FLAG_MATCH: Send match found notification on matches
  */
 enum iwl_mvm_lmac_scan_flags {
 	IWL_MVM_LMAC_SCAN_FLAG_PASS_ALL		= BIT(0),
@@ -681,6 +682,7 @@ enum iwl_mvm_lmac_scan_flags {
 	IWL_MVM_LMAC_SCAN_FLAG_MULTIPLE_SSIDS	= BIT(4),
 	IWL_MVM_LMAC_SCAN_FLAG_FRAGMENTED	= BIT(5),
 	IWL_MVM_LMAC_SCAN_FLAGS_RRM_ENABLED	= BIT(6),
+	IWL_MVM_LMAC_SCAN_FLAG_MATCH		= BIT(9),
 };
 
 enum iwl_scan_priority {
--- a/drivers/net/wireless/iwlwifi/mvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/mvm/scan.c
@@ -1334,6 +1334,7 @@ int iwl_mvm_unified_sched_scan_lmac(stru
 		IWL_DEBUG_SCAN(mvm,
 			       "Sending scheduled scan with filtering, n_match_sets %d\n",
 			       req->n_match_sets);
+		flags |= IWL_MVM_LMAC_SCAN_FLAG_MATCH;
 	} else {
 		IWL_DEBUG_SCAN(mvm,
 			       "Sending Scheduled scan without filtering\n");



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 58/61] ACPI / PM: Do not disable wakeup GPEs that have not been enabled
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (56 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 57/61] iwlwifi: mvm: add a flag to enable match found notification Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 59/61] crypto: prefix module autoloading with "crypto-" Greg Kroah-Hartman
                   ` (4 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Rafael J. Wysocki

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>

commit 175f8e2650f7ca6b33d338be3ccc1c00e89594ea upstream.

In some cases acpi_device_wakeup() may be called to ensure wakeup
power to be off for a given device even though that device's wakeup
GPE has not been enabled so far.  It calls acpi_disable_gpe() on a
GPE that's not enabled and this causes ACPICA to return the AE_LIMIT
status code from that call which then is reported as an error by the
ACPICA's debug facilities (if enabled).  This may lead to a fair
amount of confusion, so introduce a new ACPI device wakeup flag
to store the wakeup GPE status and avoid disabling wakeup GPEs
that have not been enabled.

Reported-and-tested-by: Venkat Raghavulu <venkat.raghavulu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 drivers/acpi/device_pm.c |   12 ++++++++++--
 include/acpi/acpi_bus.h  |    1 +
 2 files changed, 11 insertions(+), 2 deletions(-)

--- a/drivers/acpi/device_pm.c
+++ b/drivers/acpi/device_pm.c
@@ -680,13 +680,21 @@ static int acpi_device_wakeup(struct acp
 		if (error)
 			return error;
 
+		if (adev->wakeup.flags.enabled)
+			return 0;
+
 		res = acpi_enable_gpe(wakeup->gpe_device, wakeup->gpe_number);
-		if (ACPI_FAILURE(res)) {
+		if (ACPI_SUCCESS(res)) {
+			adev->wakeup.flags.enabled = 1;
+		} else {
 			acpi_disable_wakeup_device_power(adev);
 			return -EIO;
 		}
 	} else {
-		acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+		if (adev->wakeup.flags.enabled) {
+			acpi_disable_gpe(wakeup->gpe_device, wakeup->gpe_number);
+			adev->wakeup.flags.enabled = 0;
+		}
 		acpi_disable_wakeup_device_power(adev);
 	}
 	return 0;
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -312,6 +312,7 @@ struct acpi_device_wakeup_flags {
 	u8 valid:1;		/* Can successfully enable wakeup? */
 	u8 run_wake:1;		/* Run-Wake GPE devices */
 	u8 notifier_present:1;  /* Wake-up notify handler has been installed */
+	u8 enabled:1;		/* Enabled for wakeup */
 };
 
 struct acpi_device_wakeup_context {



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 59/61] crypto: prefix module autoloading with "crypto-"
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (57 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 58/61] ACPI / PM: Do not disable wakeup GPEs that have not been enabled Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 60/61] crypto: include crypto- module prefix in template Greg Kroah-Hartman
                   ` (3 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel; +Cc: Greg Kroah-Hartman, stable, Kees Cook, Herbert Xu

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 5d26a105b5a73e5635eae0629b42fa0a90e07b7b upstream.

This prefixes all crypto module loading with "crypto-" so we never run
the risk of exposing module auto-loading to userspace via a crypto API,
as demonstrated by Mathias Krause:

https://lkml.org/lkml/2013/3/4/70

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/arm/crypto/aes_glue.c                  |    4 ++--
 arch/arm/crypto/sha1_glue.c                 |    2 +-
 arch/arm/crypto/sha1_neon_glue.c            |    2 +-
 arch/arm/crypto/sha512_neon_glue.c          |    4 ++--
 arch/arm64/crypto/aes-ce-ccm-glue.c         |    2 +-
 arch/arm64/crypto/aes-glue.c                |    8 ++++----
 arch/powerpc/crypto/sha1.c                  |    2 +-
 arch/s390/crypto/aes_s390.c                 |    2 +-
 arch/s390/crypto/des_s390.c                 |    4 ++--
 arch/s390/crypto/ghash_s390.c               |    2 +-
 arch/s390/crypto/sha1_s390.c                |    2 +-
 arch/s390/crypto/sha256_s390.c              |    4 ++--
 arch/s390/crypto/sha512_s390.c              |    4 ++--
 arch/sparc/crypto/aes_glue.c                |    2 +-
 arch/sparc/crypto/camellia_glue.c           |    2 +-
 arch/sparc/crypto/crc32c_glue.c             |    2 +-
 arch/sparc/crypto/des_glue.c                |    2 +-
 arch/sparc/crypto/md5_glue.c                |    2 +-
 arch/sparc/crypto/sha1_glue.c               |    2 +-
 arch/sparc/crypto/sha256_glue.c             |    4 ++--
 arch/sparc/crypto/sha512_glue.c             |    4 ++--
 arch/x86/crypto/aes_glue.c                  |    4 ++--
 arch/x86/crypto/aesni-intel_glue.c          |    2 +-
 arch/x86/crypto/blowfish_glue.c             |    4 ++--
 arch/x86/crypto/camellia_aesni_avx2_glue.c  |    4 ++--
 arch/x86/crypto/camellia_aesni_avx_glue.c   |    4 ++--
 arch/x86/crypto/camellia_glue.c             |    4 ++--
 arch/x86/crypto/cast5_avx_glue.c            |    2 +-
 arch/x86/crypto/cast6_avx_glue.c            |    2 +-
 arch/x86/crypto/crc32-pclmul_glue.c         |    4 ++--
 arch/x86/crypto/crc32c-intel_glue.c         |    4 ++--
 arch/x86/crypto/crct10dif-pclmul_glue.c     |    4 ++--
 arch/x86/crypto/des3_ede_glue.c             |    8 ++++----
 arch/x86/crypto/ghash-clmulni-intel_glue.c  |    2 +-
 arch/x86/crypto/salsa20_glue.c              |    4 ++--
 arch/x86/crypto/serpent_avx2_glue.c         |    4 ++--
 arch/x86/crypto/serpent_avx_glue.c          |    2 +-
 arch/x86/crypto/serpent_sse2_glue.c         |    2 +-
 arch/x86/crypto/sha1_ssse3_glue.c           |    2 +-
 arch/x86/crypto/sha256_ssse3_glue.c         |    4 ++--
 arch/x86/crypto/sha512_ssse3_glue.c         |    4 ++--
 arch/x86/crypto/twofish_avx_glue.c          |    2 +-
 arch/x86/crypto/twofish_glue.c              |    4 ++--
 arch/x86/crypto/twofish_glue_3way.c         |    4 ++--
 crypto/842.c                                |    1 +
 crypto/aes_generic.c                        |    2 +-
 crypto/ansi_cprng.c                         |    2 +-
 crypto/anubis.c                             |    1 +
 crypto/api.c                                |    4 ++--
 crypto/arc4.c                               |    1 +
 crypto/blowfish_generic.c                   |    2 +-
 crypto/camellia_generic.c                   |    2 +-
 crypto/cast5_generic.c                      |    2 +-
 crypto/cast6_generic.c                      |    2 +-
 crypto/ccm.c                                |    4 ++--
 crypto/crc32.c                              |    1 +
 crypto/crc32c_generic.c                     |    2 +-
 crypto/crct10dif_generic.c                  |    2 +-
 crypto/crypto_null.c                        |    6 +++---
 crypto/ctr.c                                |    2 +-
 crypto/deflate.c                            |    2 +-
 crypto/des_generic.c                        |    4 ++--
 crypto/fcrypt.c                             |    1 +
 crypto/gcm.c                                |    6 +++---
 crypto/ghash-generic.c                      |    2 +-
 crypto/khazad.c                             |    1 +
 crypto/krng.c                               |    2 +-
 crypto/lz4.c                                |    1 +
 crypto/lz4hc.c                              |    1 +
 crypto/lzo.c                                |    1 +
 crypto/md4.c                                |    2 +-
 crypto/md5.c                                |    1 +
 crypto/michael_mic.c                        |    1 +
 crypto/rmd128.c                             |    1 +
 crypto/rmd160.c                             |    1 +
 crypto/rmd256.c                             |    1 +
 crypto/rmd320.c                             |    1 +
 crypto/salsa20_generic.c                    |    2 +-
 crypto/seed.c                               |    1 +
 crypto/serpent_generic.c                    |    4 ++--
 crypto/sha1_generic.c                       |    2 +-
 crypto/sha256_generic.c                     |    4 ++--
 crypto/sha512_generic.c                     |    4 ++--
 crypto/tea.c                                |    4 ++--
 crypto/tgr192.c                             |    4 ++--
 crypto/twofish_generic.c                    |    2 +-
 crypto/wp512.c                              |    4 ++--
 crypto/zlib.c                               |    1 +
 drivers/crypto/padlock-aes.c                |    2 +-
 drivers/crypto/padlock-sha.c                |    8 ++++----
 drivers/crypto/qat/qat_common/adf_ctl_drv.c |    3 ++-
 drivers/crypto/ux500/cryp/cryp_core.c       |    4 ++--
 drivers/crypto/ux500/hash/hash_core.c       |    8 ++++----
 drivers/s390/crypto/ap_bus.c                |    3 ++-
 include/linux/crypto.h                      |   13 +++++++++++++
 95 files changed, 156 insertions(+), 124 deletions(-)

--- a/arch/arm/crypto/aes_glue.c
+++ b/arch/arm/crypto/aes_glue.c
@@ -93,6 +93,6 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("aes");
-MODULE_ALIAS("aes-asm");
+MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-asm");
 MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
--- a/arch/arm/crypto/sha1_glue.c
+++ b/arch/arm/crypto/sha1_glue.c
@@ -171,5 +171,5 @@ module_exit(sha1_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)");
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_AUTHOR("David McCullough <ucdevel@gmail.com>");
--- a/arch/arm/crypto/sha1_neon_glue.c
+++ b/arch/arm/crypto/sha1_neon_glue.c
@@ -194,4 +194,4 @@ module_exit(sha1_neon_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, NEON accelerated");
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
--- a/arch/arm/crypto/sha512_neon_glue.c
+++ b/arch/arm/crypto/sha512_neon_glue.c
@@ -301,5 +301,5 @@ module_exit(sha512_neon_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, NEON accelerated");
 
-MODULE_ALIAS("sha512");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
+MODULE_ALIAS_CRYPTO("sha384");
--- a/arch/arm64/crypto/aes-ce-ccm-glue.c
+++ b/arch/arm64/crypto/aes-ce-ccm-glue.c
@@ -294,4 +294,4 @@ module_exit(aes_mod_exit);
 MODULE_DESCRIPTION("Synchronous AES in CCM mode using ARMv8 Crypto Extensions");
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
 MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("ccm(aes)");
+MODULE_ALIAS_CRYPTO("ccm(aes)");
--- a/arch/arm64/crypto/aes-glue.c
+++ b/arch/arm64/crypto/aes-glue.c
@@ -38,10 +38,10 @@ MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS
 #define aes_xts_encrypt		neon_aes_xts_encrypt
 #define aes_xts_decrypt		neon_aes_xts_decrypt
 MODULE_DESCRIPTION("AES-ECB/CBC/CTR/XTS using ARMv8 NEON");
-MODULE_ALIAS("ecb(aes)");
-MODULE_ALIAS("cbc(aes)");
-MODULE_ALIAS("ctr(aes)");
-MODULE_ALIAS("xts(aes)");
+MODULE_ALIAS_CRYPTO("ecb(aes)");
+MODULE_ALIAS_CRYPTO("cbc(aes)");
+MODULE_ALIAS_CRYPTO("ctr(aes)");
+MODULE_ALIAS_CRYPTO("xts(aes)");
 #endif
 
 MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
--- a/arch/powerpc/crypto/sha1.c
+++ b/arch/powerpc/crypto/sha1.c
@@ -154,4 +154,4 @@ module_exit(sha1_powerpc_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
-MODULE_ALIAS("sha1-powerpc");
+MODULE_ALIAS_CRYPTO("sha1-powerpc");
--- a/arch/s390/crypto/aes_s390.c
+++ b/arch/s390/crypto/aes_s390.c
@@ -979,7 +979,7 @@ static void __exit aes_s390_fini(void)
 module_init(aes_s390_init);
 module_exit(aes_s390_fini);
 
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS_CRYPTO("aes-all");
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("GPL");
--- a/arch/s390/crypto/des_s390.c
+++ b/arch/s390/crypto/des_s390.c
@@ -619,8 +619,8 @@ static void __exit des_s390_exit(void)
 module_init(des_s390_init);
 module_exit(des_s390_exit);
 
-MODULE_ALIAS("des");
-MODULE_ALIAS("des3_ede");
+MODULE_ALIAS_CRYPTO("des");
+MODULE_ALIAS_CRYPTO("des3_ede");
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
--- a/arch/s390/crypto/ghash_s390.c
+++ b/arch/s390/crypto/ghash_s390.c
@@ -160,7 +160,7 @@ static void __exit ghash_mod_exit(void)
 module_init(ghash_mod_init);
 module_exit(ghash_mod_exit);
 
-MODULE_ALIAS("ghash");
+MODULE_ALIAS_CRYPTO("ghash");
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm, s390 implementation");
--- a/arch/s390/crypto/sha1_s390.c
+++ b/arch/s390/crypto/sha1_s390.c
@@ -103,6 +103,6 @@ static void __exit sha1_s390_fini(void)
 module_init(sha1_s390_init);
 module_exit(sha1_s390_fini);
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
--- a/arch/s390/crypto/sha256_s390.c
+++ b/arch/s390/crypto/sha256_s390.c
@@ -143,7 +143,7 @@ static void __exit sha256_s390_fini(void
 module_init(sha256_s390_init);
 module_exit(sha256_s390_fini);
 
-MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA256 and SHA224 Secure Hash Algorithm");
--- a/arch/s390/crypto/sha512_s390.c
+++ b/arch/s390/crypto/sha512_s390.c
@@ -86,7 +86,7 @@ static struct shash_alg sha512_alg = {
 	}
 };
 
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha512");
 
 static int sha384_init(struct shash_desc *desc)
 {
@@ -126,7 +126,7 @@ static struct shash_alg sha384_alg = {
 	}
 };
 
-MODULE_ALIAS("sha384");
+MODULE_ALIAS_CRYPTO("sha384");
 
 static int __init init(void)
 {
--- a/arch/sparc/crypto/aes_glue.c
+++ b/arch/sparc/crypto/aes_glue.c
@@ -499,6 +499,6 @@ module_exit(aes_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("AES Secure Hash Algorithm, sparc64 aes opcode accelerated");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/camellia_glue.c
+++ b/arch/sparc/crypto/camellia_glue.c
@@ -322,6 +322,6 @@ module_exit(camellia_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, sparc64 camellia opcode accelerated");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/crc32c_glue.c
+++ b/arch/sparc/crypto/crc32c_glue.c
@@ -176,6 +176,6 @@ module_exit(crc32c_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CRC32c (Castagnoli), sparc64 crc32c opcode accelerated");
 
-MODULE_ALIAS("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/des_glue.c
+++ b/arch/sparc/crypto/des_glue.c
@@ -532,6 +532,6 @@ module_exit(des_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms, sparc64 des opcode accelerated");
 
-MODULE_ALIAS("des");
+MODULE_ALIAS_CRYPTO("des");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/md5_glue.c
+++ b/arch/sparc/crypto/md5_glue.c
@@ -185,6 +185,6 @@ module_exit(md5_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, sparc64 md5 opcode accelerated");
 
-MODULE_ALIAS("md5");
+MODULE_ALIAS_CRYPTO("md5");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/sha1_glue.c
+++ b/arch/sparc/crypto/sha1_glue.c
@@ -180,6 +180,6 @@ module_exit(sha1_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, sparc64 sha1 opcode accelerated");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/sha256_glue.c
+++ b/arch/sparc/crypto/sha256_glue.c
@@ -237,7 +237,7 @@ module_exit(sha256_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm, sparc64 sha256 opcode accelerated");
 
-MODULE_ALIAS("sha224");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
 
 #include "crop_devid.c"
--- a/arch/sparc/crypto/sha512_glue.c
+++ b/arch/sparc/crypto/sha512_glue.c
@@ -222,7 +222,7 @@ module_exit(sha512_sparc64_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-384 and SHA-512 Secure Hash Algorithm, sparc64 sha512 opcode accelerated");
 
-MODULE_ALIAS("sha384");
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
 
 #include "crop_devid.c"
--- a/arch/x86/crypto/aes_glue.c
+++ b/arch/x86/crypto/aes_glue.c
@@ -66,5 +66,5 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, asm optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("aes");
-MODULE_ALIAS("aes-asm");
+MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-asm");
--- a/arch/x86/crypto/aesni-intel_glue.c
+++ b/arch/x86/crypto/aesni-intel_glue.c
@@ -1550,4 +1550,4 @@ module_exit(aesni_exit);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm, Intel AES-NI instructions optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
--- a/arch/x86/crypto/blowfish_glue.c
+++ b/arch/x86/crypto/blowfish_glue.c
@@ -478,5 +478,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm, asm optimized");
-MODULE_ALIAS("blowfish");
-MODULE_ALIAS("blowfish-asm");
+MODULE_ALIAS_CRYPTO("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish-asm");
--- a/arch/x86/crypto/camellia_aesni_avx2_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx2_glue.c
@@ -582,5 +582,5 @@ module_exit(camellia_aesni_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, AES-NI/AVX2 optimized");
-MODULE_ALIAS("camellia");
-MODULE_ALIAS("camellia-asm");
+MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-asm");
--- a/arch/x86/crypto/camellia_aesni_avx_glue.c
+++ b/arch/x86/crypto/camellia_aesni_avx_glue.c
@@ -574,5 +574,5 @@ module_exit(camellia_aesni_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, AES-NI/AVX optimized");
-MODULE_ALIAS("camellia");
-MODULE_ALIAS("camellia-asm");
+MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-asm");
--- a/arch/x86/crypto/camellia_glue.c
+++ b/arch/x86/crypto/camellia_glue.c
@@ -1725,5 +1725,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Camellia Cipher Algorithm, asm optimized");
-MODULE_ALIAS("camellia");
-MODULE_ALIAS("camellia-asm");
+MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-asm");
--- a/arch/x86/crypto/cast5_avx_glue.c
+++ b/arch/x86/crypto/cast5_avx_glue.c
@@ -491,4 +491,4 @@ module_exit(cast5_exit);
 
 MODULE_DESCRIPTION("Cast5 Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("cast5");
+MODULE_ALIAS_CRYPTO("cast5");
--- a/arch/x86/crypto/cast6_avx_glue.c
+++ b/arch/x86/crypto/cast6_avx_glue.c
@@ -611,4 +611,4 @@ module_exit(cast6_exit);
 
 MODULE_DESCRIPTION("Cast6 Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("cast6");
+MODULE_ALIAS_CRYPTO("cast6");
--- a/arch/x86/crypto/crc32-pclmul_glue.c
+++ b/arch/x86/crypto/crc32-pclmul_glue.c
@@ -197,5 +197,5 @@ module_exit(crc32_pclmul_mod_fini);
 MODULE_AUTHOR("Alexander Boyko <alexander_boyko@xyratex.com>");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("crc32");
-MODULE_ALIAS("crc32-pclmul");
+MODULE_ALIAS_CRYPTO("crc32");
+MODULE_ALIAS_CRYPTO("crc32-pclmul");
--- a/arch/x86/crypto/crc32c-intel_glue.c
+++ b/arch/x86/crypto/crc32c-intel_glue.c
@@ -280,5 +280,5 @@ MODULE_AUTHOR("Austin Zhang <austin.zhan
 MODULE_DESCRIPTION("CRC32c (Castagnoli) optimization using Intel Hardware.");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("crc32c");
-MODULE_ALIAS("crc32c-intel");
+MODULE_ALIAS_CRYPTO("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c-intel");
--- a/arch/x86/crypto/crct10dif-pclmul_glue.c
+++ b/arch/x86/crypto/crct10dif-pclmul_glue.c
@@ -147,5 +147,5 @@ MODULE_AUTHOR("Tim Chen <tim.c.chen@linu
 MODULE_DESCRIPTION("T10 DIF CRC calculation accelerated with PCLMULQDQ.");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("crct10dif");
-MODULE_ALIAS("crct10dif-pclmul");
+MODULE_ALIAS_CRYPTO("crct10dif");
+MODULE_ALIAS_CRYPTO("crct10dif-pclmul");
--- a/arch/x86/crypto/des3_ede_glue.c
+++ b/arch/x86/crypto/des3_ede_glue.c
@@ -502,8 +502,8 @@ module_exit(des3_ede_x86_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Triple DES EDE Cipher Algorithm, asm optimized");
-MODULE_ALIAS("des3_ede");
-MODULE_ALIAS("des3_ede-asm");
-MODULE_ALIAS("des");
-MODULE_ALIAS("des-asm");
+MODULE_ALIAS_CRYPTO("des3_ede");
+MODULE_ALIAS_CRYPTO("des3_ede-asm");
+MODULE_ALIAS_CRYPTO("des");
+MODULE_ALIAS_CRYPTO("des-asm");
 MODULE_AUTHOR("Jussi Kivilinna <jussi.kivilinna@iki.fi>");
--- a/arch/x86/crypto/ghash-clmulni-intel_glue.c
+++ b/arch/x86/crypto/ghash-clmulni-intel_glue.c
@@ -341,4 +341,4 @@ module_exit(ghash_pclmulqdqni_mod_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm, "
 		   "acclerated by PCLMULQDQ-NI");
-MODULE_ALIAS("ghash");
+MODULE_ALIAS_CRYPTO("ghash");
--- a/arch/x86/crypto/salsa20_glue.c
+++ b/arch/x86/crypto/salsa20_glue.c
@@ -119,5 +119,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm (optimized assembly version)");
-MODULE_ALIAS("salsa20");
-MODULE_ALIAS("salsa20-asm");
+MODULE_ALIAS_CRYPTO("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20-asm");
--- a/arch/x86/crypto/serpent_avx2_glue.c
+++ b/arch/x86/crypto/serpent_avx2_glue.c
@@ -558,5 +558,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Serpent Cipher Algorithm, AVX2 optimized");
-MODULE_ALIAS("serpent");
-MODULE_ALIAS("serpent-asm");
+MODULE_ALIAS_CRYPTO("serpent");
+MODULE_ALIAS_CRYPTO("serpent-asm");
--- a/arch/x86/crypto/serpent_avx_glue.c
+++ b/arch/x86/crypto/serpent_avx_glue.c
@@ -617,4 +617,4 @@ module_exit(serpent_exit);
 
 MODULE_DESCRIPTION("Serpent Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("serpent");
+MODULE_ALIAS_CRYPTO("serpent");
--- a/arch/x86/crypto/serpent_sse2_glue.c
+++ b/arch/x86/crypto/serpent_sse2_glue.c
@@ -618,4 +618,4 @@ module_exit(serpent_sse2_exit);
 
 MODULE_DESCRIPTION("Serpent Cipher Algorithm, SSE2 optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("serpent");
+MODULE_ALIAS_CRYPTO("serpent");
--- a/arch/x86/crypto/sha1_ssse3_glue.c
+++ b/arch/x86/crypto/sha1_ssse3_glue.c
@@ -278,4 +278,4 @@ module_exit(sha1_ssse3_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
--- a/arch/x86/crypto/sha256_ssse3_glue.c
+++ b/arch/x86/crypto/sha256_ssse3_glue.c
@@ -318,5 +318,5 @@ module_exit(sha256_ssse3_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA256 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
-MODULE_ALIAS("sha256");
-MODULE_ALIAS("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
--- a/arch/x86/crypto/sha512_ssse3_glue.c
+++ b/arch/x86/crypto/sha512_ssse3_glue.c
@@ -326,5 +326,5 @@ module_exit(sha512_ssse3_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, Supplemental SSE3 accelerated");
 
-MODULE_ALIAS("sha512");
-MODULE_ALIAS("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
+MODULE_ALIAS_CRYPTO("sha384");
--- a/arch/x86/crypto/twofish_avx_glue.c
+++ b/arch/x86/crypto/twofish_avx_glue.c
@@ -579,4 +579,4 @@ module_exit(twofish_exit);
 
 MODULE_DESCRIPTION("Twofish Cipher Algorithm, AVX optimized");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("twofish");
+MODULE_ALIAS_CRYPTO("twofish");
--- a/arch/x86/crypto/twofish_glue.c
+++ b/arch/x86/crypto/twofish_glue.c
@@ -96,5 +96,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Twofish Cipher Algorithm, asm optimized");
-MODULE_ALIAS("twofish");
-MODULE_ALIAS("twofish-asm");
+MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-asm");
--- a/arch/x86/crypto/twofish_glue_3way.c
+++ b/arch/x86/crypto/twofish_glue_3way.c
@@ -495,5 +495,5 @@ module_exit(fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Twofish Cipher Algorithm, 3-way parallel asm optimized");
-MODULE_ALIAS("twofish");
-MODULE_ALIAS("twofish-asm");
+MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-asm");
--- a/crypto/842.c
+++ b/crypto/842.c
@@ -180,3 +180,4 @@ module_exit(nx842_mod_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("842 Compression Algorithm");
+MODULE_ALIAS_CRYPTO("842");
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1474,4 +1474,4 @@ module_exit(aes_fini);
 
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("Dual BSD/GPL");
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -476,4 +476,4 @@ module_param(dbg, int, 0);
 MODULE_PARM_DESC(dbg, "Boolean to enable debugging (0/1 == off/on)");
 module_init(prng_mod_init);
 module_exit(prng_mod_fini);
-MODULE_ALIAS("stdrng");
+MODULE_ALIAS_CRYPTO("stdrng");
--- a/crypto/anubis.c
+++ b/crypto/anubis.c
@@ -704,3 +704,4 @@ module_exit(anubis_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Anubis Cryptographic Algorithm");
+MODULE_ALIAS_CRYPTO("anubis");
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -216,11 +216,11 @@ struct crypto_alg *crypto_larval_lookup(
 
 	alg = crypto_alg_lookup(name, type, mask);
 	if (!alg) {
-		request_module("%s", name);
+		request_module("crypto-%s", name);
 
 		if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
 		      CRYPTO_ALG_NEED_FALLBACK))
-			request_module("%s-all", name);
+			request_module("crypto-%s-all", name);
 
 		alg = crypto_alg_lookup(name, type, mask);
 	}
--- a/crypto/arc4.c
+++ b/crypto/arc4.c
@@ -166,3 +166,4 @@ module_exit(arc4_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ARC4 Cipher Algorithm");
 MODULE_AUTHOR("Jon Oberheide <jon@oberheide.org>");
+MODULE_ALIAS_CRYPTO("arc4");
--- a/crypto/blowfish_generic.c
+++ b/crypto/blowfish_generic.c
@@ -138,4 +138,4 @@ module_exit(blowfish_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
-MODULE_ALIAS("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish");
--- a/crypto/camellia_generic.c
+++ b/crypto/camellia_generic.c
@@ -1098,4 +1098,4 @@ module_exit(camellia_fini);
 
 MODULE_DESCRIPTION("Camellia Cipher Algorithm");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("camellia");
+MODULE_ALIAS_CRYPTO("camellia");
--- a/crypto/cast5_generic.c
+++ b/crypto/cast5_generic.c
@@ -549,4 +549,4 @@ module_exit(cast5_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast5 Cipher Algorithm");
-MODULE_ALIAS("cast5");
+MODULE_ALIAS_CRYPTO("cast5");
--- a/crypto/cast6_generic.c
+++ b/crypto/cast6_generic.c
@@ -291,4 +291,4 @@ module_exit(cast6_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast6 Cipher Algorithm");
-MODULE_ALIAS("cast6");
+MODULE_ALIAS_CRYPTO("cast6");
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -879,5 +879,5 @@ module_exit(crypto_ccm_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Counter with CBC MAC");
-MODULE_ALIAS("ccm_base");
-MODULE_ALIAS("rfc4309");
+MODULE_ALIAS_CRYPTO("ccm_base");
+MODULE_ALIAS_CRYPTO("rfc4309");
--- a/crypto/crc32.c
+++ b/crypto/crc32.c
@@ -156,3 +156,4 @@ module_exit(crc32_mod_fini);
 MODULE_AUTHOR("Alexander Boyko <alexander_boyko@xyratex.com>");
 MODULE_DESCRIPTION("CRC32 calculations wrapper for lib/crc32");
 MODULE_LICENSE("GPL");
+MODULE_ALIAS_CRYPTO("crc32");
--- a/crypto/crc32c_generic.c
+++ b/crypto/crc32c_generic.c
@@ -170,5 +170,5 @@ module_exit(crc32c_mod_fini);
 MODULE_AUTHOR("Clay Haapala <chaapala@cisco.com>");
 MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations wrapper for lib/crc32c");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c");
 MODULE_SOFTDEP("pre: crc32c");
--- a/crypto/crct10dif_generic.c
+++ b/crypto/crct10dif_generic.c
@@ -124,4 +124,4 @@ module_exit(crct10dif_mod_fini);
 MODULE_AUTHOR("Tim Chen <tim.c.chen@linux.intel.com>");
 MODULE_DESCRIPTION("T10 DIF CRC calculation.");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("crct10dif");
+MODULE_ALIAS_CRYPTO("crct10dif");
--- a/crypto/crypto_null.c
+++ b/crypto/crypto_null.c
@@ -145,9 +145,9 @@ static struct crypto_alg null_algs[3] =
 	.coa_decompress		=	null_compress } }
 } };
 
-MODULE_ALIAS("compress_null");
-MODULE_ALIAS("digest_null");
-MODULE_ALIAS("cipher_null");
+MODULE_ALIAS_CRYPTO("compress_null");
+MODULE_ALIAS_CRYPTO("digest_null");
+MODULE_ALIAS_CRYPTO("cipher_null");
 
 static int __init crypto_null_mod_init(void)
 {
--- a/crypto/ctr.c
+++ b/crypto/ctr.c
@@ -466,4 +466,4 @@ module_exit(crypto_ctr_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CTR Counter block mode");
-MODULE_ALIAS("rfc3686");
+MODULE_ALIAS_CRYPTO("rfc3686");
--- a/crypto/deflate.c
+++ b/crypto/deflate.c
@@ -222,4 +222,4 @@ module_exit(deflate_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Deflate Compression Algorithm for IPCOMP");
 MODULE_AUTHOR("James Morris <jmorris@intercode.com.au>");
-
+MODULE_ALIAS_CRYPTO("deflate");
--- a/crypto/des_generic.c
+++ b/crypto/des_generic.c
@@ -983,7 +983,7 @@ static struct crypto_alg des_algs[2] = {
 	.cia_decrypt		=	des3_ede_decrypt } }
 } };
 
-MODULE_ALIAS("des3_ede");
+MODULE_ALIAS_CRYPTO("des3_ede");
 
 static int __init des_generic_mod_init(void)
 {
@@ -1001,4 +1001,4 @@ module_exit(des_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
 MODULE_AUTHOR("Dag Arne Osvik <da@osvik.no>");
-MODULE_ALIAS("des");
+MODULE_ALIAS_CRYPTO("des");
--- a/crypto/fcrypt.c
+++ b/crypto/fcrypt.c
@@ -420,3 +420,4 @@ module_exit(fcrypt_mod_fini);
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("FCrypt Cipher Algorithm");
 MODULE_AUTHOR("David Howells <dhowells@redhat.com>");
+MODULE_ALIAS_CRYPTO("fcrypt");
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -1441,6 +1441,6 @@ module_exit(crypto_gcm_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Galois/Counter Mode");
 MODULE_AUTHOR("Mikko Herranen <mh1@iki.fi>");
-MODULE_ALIAS("gcm_base");
-MODULE_ALIAS("rfc4106");
-MODULE_ALIAS("rfc4543");
+MODULE_ALIAS_CRYPTO("gcm_base");
+MODULE_ALIAS_CRYPTO("rfc4106");
+MODULE_ALIAS_CRYPTO("rfc4543");
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -172,4 +172,4 @@ module_exit(ghash_mod_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
-MODULE_ALIAS("ghash");
+MODULE_ALIAS_CRYPTO("ghash");
--- a/crypto/khazad.c
+++ b/crypto/khazad.c
@@ -880,3 +880,4 @@ module_exit(khazad_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Khazad Cryptographic Algorithm");
+MODULE_ALIAS_CRYPTO("khazad");
--- a/crypto/krng.c
+++ b/crypto/krng.c
@@ -62,4 +62,4 @@ module_exit(krng_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Kernel Random Number Generator");
-MODULE_ALIAS("stdrng");
+MODULE_ALIAS_CRYPTO("stdrng");
--- a/crypto/lz4.c
+++ b/crypto/lz4.c
@@ -104,3 +104,4 @@ module_exit(lz4_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("LZ4 Compression Algorithm");
+MODULE_ALIAS_CRYPTO("lz4");
--- a/crypto/lz4hc.c
+++ b/crypto/lz4hc.c
@@ -104,3 +104,4 @@ module_exit(lz4hc_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("LZ4HC Compression Algorithm");
+MODULE_ALIAS_CRYPTO("lz4hc");
--- a/crypto/lzo.c
+++ b/crypto/lzo.c
@@ -107,3 +107,4 @@ module_exit(lzo_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("LZO Compression Algorithm");
+MODULE_ALIAS_CRYPTO("lzo");
--- a/crypto/md4.c
+++ b/crypto/md4.c
@@ -255,4 +255,4 @@ module_exit(md4_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD4 Message Digest Algorithm");
-
+MODULE_ALIAS_CRYPTO("md4");
--- a/crypto/md5.c
+++ b/crypto/md5.c
@@ -168,3 +168,4 @@ module_exit(md5_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("MD5 Message Digest Algorithm");
+MODULE_ALIAS_CRYPTO("md5");
--- a/crypto/michael_mic.c
+++ b/crypto/michael_mic.c
@@ -184,3 +184,4 @@ module_exit(michael_mic_exit);
 MODULE_LICENSE("GPL v2");
 MODULE_DESCRIPTION("Michael MIC");
 MODULE_AUTHOR("Jouni Malinen <j@w1.fi>");
+MODULE_ALIAS_CRYPTO("michael_mic");
--- a/crypto/rmd128.c
+++ b/crypto/rmd128.c
@@ -327,3 +327,4 @@ module_exit(rmd128_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-128 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd128");
--- a/crypto/rmd160.c
+++ b/crypto/rmd160.c
@@ -371,3 +371,4 @@ module_exit(rmd160_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-160 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd160");
--- a/crypto/rmd256.c
+++ b/crypto/rmd256.c
@@ -346,3 +346,4 @@ module_exit(rmd256_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-256 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd256");
--- a/crypto/rmd320.c
+++ b/crypto/rmd320.c
@@ -395,3 +395,4 @@ module_exit(rmd320_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Adrian-Ken Rueegsegger <ken@codelabs.ch>");
 MODULE_DESCRIPTION("RIPEMD-320 Message Digest");
+MODULE_ALIAS_CRYPTO("rmd320");
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -248,4 +248,4 @@ module_exit(salsa20_generic_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm");
-MODULE_ALIAS("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20");
--- a/crypto/seed.c
+++ b/crypto/seed.c
@@ -476,3 +476,4 @@ module_exit(seed_fini);
 MODULE_DESCRIPTION("SEED Cipher Algorithm");
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Hye-Shik Chang <perky@FreeBSD.org>, Kim Hyun <hkim@kisa.or.kr>");
+MODULE_ALIAS_CRYPTO("seed");
--- a/crypto/serpent_generic.c
+++ b/crypto/serpent_generic.c
@@ -665,5 +665,5 @@ module_exit(serpent_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Serpent and tnepres (kerneli compatible serpent reversed) Cipher Algorithm");
 MODULE_AUTHOR("Dag Arne Osvik <osvik@ii.uib.no>");
-MODULE_ALIAS("tnepres");
-MODULE_ALIAS("serpent");
+MODULE_ALIAS_CRYPTO("tnepres");
+MODULE_ALIAS_CRYPTO("serpent");
--- a/crypto/sha1_generic.c
+++ b/crypto/sha1_generic.c
@@ -153,4 +153,4 @@ module_exit(sha1_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
--- a/crypto/sha256_generic.c
+++ b/crypto/sha256_generic.c
@@ -384,5 +384,5 @@ module_exit(sha256_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm");
 
-MODULE_ALIAS("sha224");
-MODULE_ALIAS("sha256");
+MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha256");
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -288,5 +288,5 @@ module_exit(sha512_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms");
 
-MODULE_ALIAS("sha384");
-MODULE_ALIAS("sha512");
+MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha512");
--- a/crypto/tea.c
+++ b/crypto/tea.c
@@ -270,8 +270,8 @@ static void __exit tea_mod_fini(void)
 	crypto_unregister_algs(tea_algs, ARRAY_SIZE(tea_algs));
 }
 
-MODULE_ALIAS("xtea");
-MODULE_ALIAS("xeta");
+MODULE_ALIAS_CRYPTO("xtea");
+MODULE_ALIAS_CRYPTO("xeta");
 
 module_init(tea_mod_init);
 module_exit(tea_mod_fini);
--- a/crypto/tgr192.c
+++ b/crypto/tgr192.c
@@ -676,8 +676,8 @@ static void __exit tgr192_mod_fini(void)
 	crypto_unregister_shashes(tgr_algs, ARRAY_SIZE(tgr_algs));
 }
 
-MODULE_ALIAS("tgr160");
-MODULE_ALIAS("tgr128");
+MODULE_ALIAS_CRYPTO("tgr160");
+MODULE_ALIAS_CRYPTO("tgr128");
 
 module_init(tgr192_mod_init);
 module_exit(tgr192_mod_fini);
--- a/crypto/twofish_generic.c
+++ b/crypto/twofish_generic.c
@@ -211,4 +211,4 @@ module_exit(twofish_mod_fini);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Twofish Cipher Algorithm");
-MODULE_ALIAS("twofish");
+MODULE_ALIAS_CRYPTO("twofish");
--- a/crypto/wp512.c
+++ b/crypto/wp512.c
@@ -1167,8 +1167,8 @@ static void __exit wp512_mod_fini(void)
 	crypto_unregister_shashes(wp_algs, ARRAY_SIZE(wp_algs));
 }
 
-MODULE_ALIAS("wp384");
-MODULE_ALIAS("wp256");
+MODULE_ALIAS_CRYPTO("wp384");
+MODULE_ALIAS_CRYPTO("wp256");
 
 module_init(wp512_mod_init);
 module_exit(wp512_mod_fini);
--- a/crypto/zlib.c
+++ b/crypto/zlib.c
@@ -378,3 +378,4 @@ module_exit(zlib_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Zlib Compression Algorithm");
 MODULE_AUTHOR("Sony Corporation");
+MODULE_ALIAS_CRYPTO("zlib");
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -563,4 +563,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algo
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("aes");
+MODULE_ALIAS_CRYPTO("aes");
--- a/drivers/crypto/padlock-sha.c
+++ b/drivers/crypto/padlock-sha.c
@@ -593,7 +593,7 @@ MODULE_DESCRIPTION("VIA PadLock SHA1/SHA
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Michal Ludvig");
 
-MODULE_ALIAS("sha1-all");
-MODULE_ALIAS("sha256-all");
-MODULE_ALIAS("sha1-padlock");
-MODULE_ALIAS("sha256-padlock");
+MODULE_ALIAS_CRYPTO("sha1-all");
+MODULE_ALIAS_CRYPTO("sha256-all");
+MODULE_ALIAS_CRYPTO("sha1-padlock");
+MODULE_ALIAS_CRYPTO("sha256-padlock");
--- a/drivers/crypto/qat/qat_common/adf_ctl_drv.c
+++ b/drivers/crypto/qat/qat_common/adf_ctl_drv.c
@@ -52,6 +52,7 @@
 #include <linux/pci.h>
 #include <linux/cdev.h>
 #include <linux/uaccess.h>
+#include <linux/crypto.h>
 
 #include "adf_accel_devices.h"
 #include "adf_common_drv.h"
@@ -487,4 +488,4 @@ module_exit(adf_unregister_ctl_device_dr
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Intel");
 MODULE_DESCRIPTION("Intel(R) QuickAssist Technology");
-MODULE_ALIAS("intel_qat");
+MODULE_ALIAS_CRYPTO("intel_qat");
--- a/drivers/crypto/ux500/cryp/cryp_core.c
+++ b/drivers/crypto/ux500/cryp/cryp_core.c
@@ -1810,7 +1810,7 @@ module_exit(ux500_cryp_mod_fini);
 module_param(cryp_mode, int, 0);
 
 MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 CRYP crypto engine.");
-MODULE_ALIAS("aes-all");
-MODULE_ALIAS("des-all");
+MODULE_ALIAS_CRYPTO("aes-all");
+MODULE_ALIAS_CRYPTO("des-all");
 
 MODULE_LICENSE("GPL");
--- a/drivers/crypto/ux500/hash/hash_core.c
+++ b/drivers/crypto/ux500/hash/hash_core.c
@@ -1995,7 +1995,7 @@ module_exit(ux500_hash_mod_fini);
 MODULE_DESCRIPTION("Driver for ST-Ericsson UX500 HASH engine.");
 MODULE_LICENSE("GPL");
 
-MODULE_ALIAS("sha1-all");
-MODULE_ALIAS("sha256-all");
-MODULE_ALIAS("hmac-sha1-all");
-MODULE_ALIAS("hmac-sha256-all");
+MODULE_ALIAS_CRYPTO("sha1-all");
+MODULE_ALIAS_CRYPTO("sha256-all");
+MODULE_ALIAS_CRYPTO("hmac-sha1-all");
+MODULE_ALIAS_CRYPTO("hmac-sha256-all");
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -44,6 +44,7 @@
 #include <linux/hrtimer.h>
 #include <linux/ktime.h>
 #include <asm/facility.h>
+#include <linux/crypto.h>
 
 #include "ap_bus.h"
 
@@ -71,7 +72,7 @@ MODULE_AUTHOR("IBM Corporation");
 MODULE_DESCRIPTION("Adjunct Processor Bus driver, " \
 		   "Copyright IBM Corp. 2006, 2012");
 MODULE_LICENSE("GPL");
-MODULE_ALIAS("z90crypt");
+MODULE_ALIAS_CRYPTO("z90crypt");
 
 /*
  * Module parameter
--- a/include/linux/crypto.h
+++ b/include/linux/crypto.h
@@ -26,6 +26,19 @@
 #include <linux/uaccess.h>
 
 /*
+ * Autoloaded crypto modules should only use a prefixed name to avoid allowing
+ * arbitrary modules to be loaded. Loading from userspace may still need the
+ * unprefixed names, so retains those aliases as well.
+ * This uses __MODULE_INFO directly instead of MODULE_ALIAS because pre-4.3
+ * gcc (e.g. avr32 toolchain) uses __LINE__ for uniqueness, and this macro
+ * expands twice on the same line. Instead, use a separate base name for the
+ * alias.
+ */
+#define MODULE_ALIAS_CRYPTO(name)	\
+		__MODULE_INFO(alias, alias_userspace, name);	\
+		__MODULE_INFO(alias, alias_crypto, "crypto-" name)
+
+/*
  * Algorithm masks and types.
  */
 #define CRYPTO_ALG_TYPE_MASK		0x0000000f



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 60/61] crypto: include crypto- module prefix in template
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (58 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 59/61] crypto: prefix module autoloading with "crypto-" Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28  1:27 ` [PATCH 3.18 61/61] crypto: add missing crypto module aliases Greg Kroah-Hartman
                   ` (2 subsequent siblings)
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Mathias Krause, Kees Cook, Herbert Xu

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Kees Cook <keescook@chromium.org>

commit 4943ba16bbc2db05115707b3ff7b4874e9e3c560 upstream.

This adds the module loading prefix "crypto-" to the template lookup
as well.

For example, attempting to load 'vfat(blowfish)' via AF_ALG now correctly
includes the "crypto-" prefix at every level, correctly rejecting "vfat":

	net-pf-38
	algif-hash
	crypto-vfat(blowfish)
	crypto-vfat(blowfish)-all
	crypto-vfat

Reported-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/x86/crypto/fpu.c |    3 +++
 crypto/algapi.c       |    4 ++--
 crypto/authenc.c      |    1 +
 crypto/authencesn.c   |    1 +
 crypto/cbc.c          |    1 +
 crypto/ccm.c          |    1 +
 crypto/chainiv.c      |    1 +
 crypto/cmac.c         |    1 +
 crypto/cryptd.c       |    1 +
 crypto/ctr.c          |    1 +
 crypto/cts.c          |    1 +
 crypto/ecb.c          |    1 +
 crypto/eseqiv.c       |    1 +
 crypto/gcm.c          |    1 +
 crypto/hmac.c         |    1 +
 crypto/lrw.c          |    1 +
 crypto/mcryptd.c      |    1 +
 crypto/pcbc.c         |    1 +
 crypto/pcrypt.c       |    1 +
 crypto/seqiv.c        |    1 +
 crypto/vmac.c         |    1 +
 crypto/xcbc.c         |    1 +
 crypto/xts.c          |    1 +
 23 files changed, 26 insertions(+), 2 deletions(-)

--- a/arch/x86/crypto/fpu.c
+++ b/arch/x86/crypto/fpu.c
@@ -17,6 +17,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/slab.h>
+#include <linux/crypto.h>
 #include <asm/i387.h>
 
 struct crypto_fpu_ctx {
@@ -159,3 +160,5 @@ void __exit crypto_fpu_exit(void)
 {
 	crypto_unregister_template(&crypto_fpu_tmpl);
 }
+
+MODULE_ALIAS_CRYPTO("fpu");
--- a/crypto/algapi.c
+++ b/crypto/algapi.c
@@ -509,8 +509,8 @@ static struct crypto_template *__crypto_
 
 struct crypto_template *crypto_lookup_template(const char *name)
 {
-	return try_then_request_module(__crypto_lookup_template(name), "%s",
-				       name);
+	return try_then_request_module(__crypto_lookup_template(name),
+				       "crypto-%s", name);
 }
 EXPORT_SYMBOL_GPL(crypto_lookup_template);
 
--- a/crypto/authenc.c
+++ b/crypto/authenc.c
@@ -721,3 +721,4 @@ module_exit(crypto_authenc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Simple AEAD wrapper for IPsec");
+MODULE_ALIAS_CRYPTO("authenc");
--- a/crypto/authencesn.c
+++ b/crypto/authencesn.c
@@ -814,3 +814,4 @@ module_exit(crypto_authenc_esn_module_ex
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
 MODULE_DESCRIPTION("AEAD wrapper for IPsec with extended sequence numbers");
+MODULE_ALIAS_CRYPTO("authencesn");
--- a/crypto/cbc.c
+++ b/crypto/cbc.c
@@ -289,3 +289,4 @@ module_exit(crypto_cbc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CBC block cipher algorithm");
+MODULE_ALIAS_CRYPTO("cbc");
--- a/crypto/ccm.c
+++ b/crypto/ccm.c
@@ -881,3 +881,4 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Counter with CBC MAC");
 MODULE_ALIAS_CRYPTO("ccm_base");
 MODULE_ALIAS_CRYPTO("rfc4309");
+MODULE_ALIAS_CRYPTO("ccm");
--- a/crypto/chainiv.c
+++ b/crypto/chainiv.c
@@ -359,3 +359,4 @@ module_exit(chainiv_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Chain IV Generator");
+MODULE_ALIAS_CRYPTO("chainiv");
--- a/crypto/cmac.c
+++ b/crypto/cmac.c
@@ -313,3 +313,4 @@ module_exit(crypto_cmac_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CMAC keyed hash algorithm");
+MODULE_ALIAS_CRYPTO("cmac");
--- a/crypto/cryptd.c
+++ b/crypto/cryptd.c
@@ -955,3 +955,4 @@ module_exit(cryptd_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Software async crypto daemon");
+MODULE_ALIAS_CRYPTO("cryptd");
--- a/crypto/ctr.c
+++ b/crypto/ctr.c
@@ -467,3 +467,4 @@ module_exit(crypto_ctr_module_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("CTR Counter block mode");
 MODULE_ALIAS_CRYPTO("rfc3686");
+MODULE_ALIAS_CRYPTO("ctr");
--- a/crypto/cts.c
+++ b/crypto/cts.c
@@ -351,3 +351,4 @@ module_exit(crypto_cts_module_exit);
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_DESCRIPTION("CTS-CBC CipherText Stealing for CBC");
+MODULE_ALIAS_CRYPTO("cts");
--- a/crypto/ecb.c
+++ b/crypto/ecb.c
@@ -185,3 +185,4 @@ module_exit(crypto_ecb_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ECB block cipher algorithm");
+MODULE_ALIAS_CRYPTO("ecb");
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -267,3 +267,4 @@ module_exit(eseqiv_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Encrypted Sequence Number IV Generator");
+MODULE_ALIAS_CRYPTO("eseqiv");
--- a/crypto/gcm.c
+++ b/crypto/gcm.c
@@ -1444,3 +1444,4 @@ MODULE_AUTHOR("Mikko Herranen <mh1@iki.f
 MODULE_ALIAS_CRYPTO("gcm_base");
 MODULE_ALIAS_CRYPTO("rfc4106");
 MODULE_ALIAS_CRYPTO("rfc4543");
+MODULE_ALIAS_CRYPTO("gcm");
--- a/crypto/hmac.c
+++ b/crypto/hmac.c
@@ -268,3 +268,4 @@ module_exit(hmac_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("HMAC hash algorithm");
+MODULE_ALIAS_CRYPTO("hmac");
--- a/crypto/lrw.c
+++ b/crypto/lrw.c
@@ -400,3 +400,4 @@ module_exit(crypto_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("LRW block cipher mode");
+MODULE_ALIAS_CRYPTO("lrw");
--- a/crypto/mcryptd.c
+++ b/crypto/mcryptd.c
@@ -703,3 +703,4 @@ module_exit(mcryptd_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Software async multibuffer crypto daemon");
+MODULE_ALIAS_CRYPTO("mcryptd");
--- a/crypto/pcbc.c
+++ b/crypto/pcbc.c
@@ -295,3 +295,4 @@ module_exit(crypto_pcbc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("PCBC block cipher algorithm");
+MODULE_ALIAS_CRYPTO("pcbc");
--- a/crypto/pcrypt.c
+++ b/crypto/pcrypt.c
@@ -565,3 +565,4 @@ module_exit(pcrypt_exit);
 MODULE_LICENSE("GPL");
 MODULE_AUTHOR("Steffen Klassert <steffen.klassert@secunet.com>");
 MODULE_DESCRIPTION("Parallel crypto wrapper");
+MODULE_ALIAS_CRYPTO("pcrypt");
--- a/crypto/seqiv.c
+++ b/crypto/seqiv.c
@@ -362,3 +362,4 @@ module_exit(seqiv_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Sequence Number IV Generator");
+MODULE_ALIAS_CRYPTO("seqiv");
--- a/crypto/vmac.c
+++ b/crypto/vmac.c
@@ -713,3 +713,4 @@ module_exit(vmac_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("VMAC hash algorithm");
+MODULE_ALIAS_CRYPTO("vmac");
--- a/crypto/xcbc.c
+++ b/crypto/xcbc.c
@@ -286,3 +286,4 @@ module_exit(crypto_xcbc_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("XCBC keyed hash algorithm");
+MODULE_ALIAS_CRYPTO("xcbc");
--- a/crypto/xts.c
+++ b/crypto/xts.c
@@ -362,3 +362,4 @@ module_exit(crypto_module_exit);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("XTS block cipher mode");
+MODULE_ALIAS_CRYPTO("xts");



^ permalink raw reply	[flat|nested] 72+ messages in thread

* [PATCH 3.18 61/61] crypto: add missing crypto module aliases
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (59 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 60/61] crypto: include crypto- module prefix in template Greg Kroah-Hartman
@ 2015-01-28  1:27 ` Greg Kroah-Hartman
  2015-01-28 14:15 ` [PATCH 3.18 00/61] 3.18.5-stable review Guenter Roeck
  2015-01-28 16:50 ` Shuah Khan
  62 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28  1:27 UTC (permalink / raw)
  To: linux-kernel
  Cc: Greg Kroah-Hartman, stable, Kees Cook, Mathias Krause, Herbert Xu

3.18-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Mathias Krause <minipli@googlemail.com>

commit 3e14dcf7cb80b34a1f38b55bc96f02d23fdaaaaf upstream.

Commit 5d26a105b5a7 ("crypto: prefix module autoloading with "crypto-"")
changed the automatic module loading when requesting crypto algorithms
to prefix all module requests with "crypto-". This requires all crypto
modules to have a crypto specific module alias even if their file name
would otherwise match the requested crypto algorithm.

Even though commit 5d26a105b5a7 added those aliases for a vast amount of
modules, it was missing a few. Add the required MODULE_ALIAS_CRYPTO
annotations to those files to make them get loaded automatically, again.
This fixes, e.g., requesting 'ecb(blowfish-generic)', which used to work
with kernels v3.18 and below.

Also change MODULE_ALIAS() lines to MODULE_ALIAS_CRYPTO(). The former
won't work for crypto modules any more.

Fixes: 5d26a105b5a7 ("crypto: prefix module autoloading with "crypto-"")
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

---
 arch/powerpc/crypto/sha1.c       |    1 +
 arch/x86/crypto/sha-mb/sha1_mb.c |    2 +-
 crypto/aes_generic.c             |    1 +
 crypto/ansi_cprng.c              |    1 +
 crypto/blowfish_generic.c        |    1 +
 crypto/camellia_generic.c        |    1 +
 crypto/cast5_generic.c           |    1 +
 crypto/cast6_generic.c           |    1 +
 crypto/crc32c_generic.c          |    1 +
 crypto/crct10dif_generic.c       |    1 +
 crypto/des_generic.c             |    5 +++--
 crypto/ghash-generic.c           |    1 +
 crypto/krng.c                    |    1 +
 crypto/salsa20_generic.c         |    1 +
 crypto/serpent_generic.c         |    1 +
 crypto/sha1_generic.c            |    1 +
 crypto/sha256_generic.c          |    2 ++
 crypto/sha512_generic.c          |    2 ++
 crypto/tea.c                     |    1 +
 crypto/tgr192.c                  |    1 +
 crypto/twofish_generic.c         |    1 +
 crypto/wp512.c                   |    1 +
 22 files changed, 26 insertions(+), 3 deletions(-)

--- a/arch/powerpc/crypto/sha1.c
+++ b/arch/powerpc/crypto/sha1.c
@@ -154,4 +154,5 @@ module_exit(sha1_powerpc_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
+MODULE_ALIAS_CRYPTO("sha1");
 MODULE_ALIAS_CRYPTO("sha1-powerpc");
--- a/arch/x86/crypto/sha-mb/sha1_mb.c
+++ b/arch/x86/crypto/sha-mb/sha1_mb.c
@@ -932,4 +932,4 @@ module_exit(sha1_mb_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, multi buffer accelerated");
 
-MODULE_ALIAS("sha1");
+MODULE_ALIAS_CRYPTO("sha1");
--- a/crypto/aes_generic.c
+++ b/crypto/aes_generic.c
@@ -1475,3 +1475,4 @@ module_exit(aes_fini);
 MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm");
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_ALIAS_CRYPTO("aes");
+MODULE_ALIAS_CRYPTO("aes-generic");
--- a/crypto/ansi_cprng.c
+++ b/crypto/ansi_cprng.c
@@ -477,3 +477,4 @@ MODULE_PARM_DESC(dbg, "Boolean to enable
 module_init(prng_mod_init);
 module_exit(prng_mod_fini);
 MODULE_ALIAS_CRYPTO("stdrng");
+MODULE_ALIAS_CRYPTO("ansi_cprng");
--- a/crypto/blowfish_generic.c
+++ b/crypto/blowfish_generic.c
@@ -139,3 +139,4 @@ module_exit(blowfish_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Blowfish Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("blowfish");
+MODULE_ALIAS_CRYPTO("blowfish-generic");
--- a/crypto/camellia_generic.c
+++ b/crypto/camellia_generic.c
@@ -1099,3 +1099,4 @@ module_exit(camellia_fini);
 MODULE_DESCRIPTION("Camellia Cipher Algorithm");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CRYPTO("camellia");
+MODULE_ALIAS_CRYPTO("camellia-generic");
--- a/crypto/cast5_generic.c
+++ b/crypto/cast5_generic.c
@@ -550,3 +550,4 @@ module_exit(cast5_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast5 Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("cast5");
+MODULE_ALIAS_CRYPTO("cast5-generic");
--- a/crypto/cast6_generic.c
+++ b/crypto/cast6_generic.c
@@ -292,3 +292,4 @@ module_exit(cast6_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Cast6 Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("cast6");
+MODULE_ALIAS_CRYPTO("cast6-generic");
--- a/crypto/crc32c_generic.c
+++ b/crypto/crc32c_generic.c
@@ -171,4 +171,5 @@ MODULE_AUTHOR("Clay Haapala <chaapala@ci
 MODULE_DESCRIPTION("CRC32c (Castagnoli) calculations wrapper for lib/crc32c");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CRYPTO("crc32c");
+MODULE_ALIAS_CRYPTO("crc32c-generic");
 MODULE_SOFTDEP("pre: crc32c");
--- a/crypto/crct10dif_generic.c
+++ b/crypto/crct10dif_generic.c
@@ -125,3 +125,4 @@ MODULE_AUTHOR("Tim Chen <tim.c.chen@linu
 MODULE_DESCRIPTION("T10 DIF CRC calculation.");
 MODULE_LICENSE("GPL");
 MODULE_ALIAS_CRYPTO("crct10dif");
+MODULE_ALIAS_CRYPTO("crct10dif-generic");
--- a/crypto/des_generic.c
+++ b/crypto/des_generic.c
@@ -983,8 +983,6 @@ static struct crypto_alg des_algs[2] = {
 	.cia_decrypt		=	des3_ede_decrypt } }
 } };
 
-MODULE_ALIAS_CRYPTO("des3_ede");
-
 static int __init des_generic_mod_init(void)
 {
 	return crypto_register_algs(des_algs, ARRAY_SIZE(des_algs));
@@ -1002,3 +1000,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("DES & Triple DES EDE Cipher Algorithms");
 MODULE_AUTHOR("Dag Arne Osvik <da@osvik.no>");
 MODULE_ALIAS_CRYPTO("des");
+MODULE_ALIAS_CRYPTO("des-generic");
+MODULE_ALIAS_CRYPTO("des3_ede");
+MODULE_ALIAS_CRYPTO("des3_ede-generic");
--- a/crypto/ghash-generic.c
+++ b/crypto/ghash-generic.c
@@ -173,3 +173,4 @@ module_exit(ghash_mod_exit);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("GHASH Message Digest Algorithm");
 MODULE_ALIAS_CRYPTO("ghash");
+MODULE_ALIAS_CRYPTO("ghash-generic");
--- a/crypto/krng.c
+++ b/crypto/krng.c
@@ -63,3 +63,4 @@ module_exit(krng_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("Kernel Random Number Generator");
 MODULE_ALIAS_CRYPTO("stdrng");
+MODULE_ALIAS_CRYPTO("krng");
--- a/crypto/salsa20_generic.c
+++ b/crypto/salsa20_generic.c
@@ -249,3 +249,4 @@ module_exit(salsa20_generic_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Salsa20 stream cipher algorithm");
 MODULE_ALIAS_CRYPTO("salsa20");
+MODULE_ALIAS_CRYPTO("salsa20-generic");
--- a/crypto/serpent_generic.c
+++ b/crypto/serpent_generic.c
@@ -667,3 +667,4 @@ MODULE_DESCRIPTION("Serpent and tnepres
 MODULE_AUTHOR("Dag Arne Osvik <osvik@ii.uib.no>");
 MODULE_ALIAS_CRYPTO("tnepres");
 MODULE_ALIAS_CRYPTO("serpent");
+MODULE_ALIAS_CRYPTO("serpent-generic");
--- a/crypto/sha1_generic.c
+++ b/crypto/sha1_generic.c
@@ -154,3 +154,4 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm");
 
 MODULE_ALIAS_CRYPTO("sha1");
+MODULE_ALIAS_CRYPTO("sha1-generic");
--- a/crypto/sha256_generic.c
+++ b/crypto/sha256_generic.c
@@ -385,4 +385,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-224 and SHA-256 Secure Hash Algorithm");
 
 MODULE_ALIAS_CRYPTO("sha224");
+MODULE_ALIAS_CRYPTO("sha224-generic");
 MODULE_ALIAS_CRYPTO("sha256");
+MODULE_ALIAS_CRYPTO("sha256-generic");
--- a/crypto/sha512_generic.c
+++ b/crypto/sha512_generic.c
@@ -289,4 +289,6 @@ MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("SHA-512 and SHA-384 Secure Hash Algorithms");
 
 MODULE_ALIAS_CRYPTO("sha384");
+MODULE_ALIAS_CRYPTO("sha384-generic");
 MODULE_ALIAS_CRYPTO("sha512");
+MODULE_ALIAS_CRYPTO("sha512-generic");
--- a/crypto/tea.c
+++ b/crypto/tea.c
@@ -270,6 +270,7 @@ static void __exit tea_mod_fini(void)
 	crypto_unregister_algs(tea_algs, ARRAY_SIZE(tea_algs));
 }
 
+MODULE_ALIAS_CRYPTO("tea");
 MODULE_ALIAS_CRYPTO("xtea");
 MODULE_ALIAS_CRYPTO("xeta");
 
--- a/crypto/tgr192.c
+++ b/crypto/tgr192.c
@@ -676,6 +676,7 @@ static void __exit tgr192_mod_fini(void)
 	crypto_unregister_shashes(tgr_algs, ARRAY_SIZE(tgr_algs));
 }
 
+MODULE_ALIAS_CRYPTO("tgr192");
 MODULE_ALIAS_CRYPTO("tgr160");
 MODULE_ALIAS_CRYPTO("tgr128");
 
--- a/crypto/twofish_generic.c
+++ b/crypto/twofish_generic.c
@@ -212,3 +212,4 @@ module_exit(twofish_mod_fini);
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION ("Twofish Cipher Algorithm");
 MODULE_ALIAS_CRYPTO("twofish");
+MODULE_ALIAS_CRYPTO("twofish-generic");
--- a/crypto/wp512.c
+++ b/crypto/wp512.c
@@ -1167,6 +1167,7 @@ static void __exit wp512_mod_fini(void)
 	crypto_unregister_shashes(wp_algs, ARRAY_SIZE(wp_algs));
 }
 
+MODULE_ALIAS_CRYPTO("wp512");
 MODULE_ALIAS_CRYPTO("wp384");
 MODULE_ALIAS_CRYPTO("wp256");
 



^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28  1:26 ` [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool Greg Kroah-Hartman
@ 2015-01-28  1:51   ` Lai Jiangshan
  2015-01-28  2:24     ` Tejun Heo
  0 siblings, 1 reply; 72+ messages in thread
From: Lai Jiangshan @ 2015-01-28  1:51 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: stable, Tejun Heo, Eric Sandeen, Dave Chinner

On 01/28/2015 09:26 AM, Greg Kroah-Hartman wrote:
> 3.18-stable review patch.  If anyone has any objections, please let me know.


I don't think it is a bug-fix.
It is just a good cleanup.

> 
> ------------------
> 
> From: Tejun Heo <tj@kernel.org>
> 
> commit 29187a9eeaf362d8422e62e17a22a6e115277a49 upstream.
> 
> A worker_pool's forward progress is guaranteed by the fact that the
> last idle worker assumes the manager role to create more workers and
> summon the rescuers if creating workers doesn't succeed in timely
> manner before proceeding to execute work items.
> 
> This manager role is implemented in manage_workers(), which indicates
> whether the worker may proceed to work item execution with its return
> value.  This is necessary because multiple workers may contend for the
> manager role, and, if there already is a manager, others should
> proceed to work item execution.
> 
> Unfortunately, the function also indicates that the worker may proceed
> to work item execution if need_to_create_worker() is false at the head
> of the function.  need_to_create_worker() tests the following
> conditions.
> 
> 	pending work items && !nr_running && !nr_idle
> 
> The first and third conditions are protected by pool->lock and thus
> won't change while holding pool->lock; however, nr_running can change
> asynchronously as other workers block and resume and while it's likely
> to be zero, as someone woke this worker up in the first place, some
> other workers could have become runnable inbetween making it non-zero.
> 
> If this happens, manage_worker() could return false even with zero
> nr_idle making the worker, the last idle one, proceed to execute work
> items.  If then all workers of the pool end up blocking on a resource
> which can only be released by a work item which is pending on that
> pool, the whole pool can deadlock as there's no one to create more
> workers or summon the rescuers.
> 
> This patch fixes the problem by removing the early exit condition from
> maybe_create_worker() and making manage_workers() return false iff
> there's already another manager, which ensures that the last worker
> doesn't start executing work items.
> 
> We can leave the early exit condition alone and just ignore the return
> value but the only reason it was put there is because the
> manage_workers() used to perform both creations and destructions of
> workers and thus the function may be invoked while the pool is trying
> to reduce the number of workers.  Now that manage_workers() is called
> only when more workers are needed, the only case this early exit
> condition is triggered is rare race conditions rendering it pointless.
> 
> Tested with simulated workload and modified workqueue code which
> trigger the pool deadlock reliably without this patch.
> 
> Signed-off-by: Tejun Heo <tj@kernel.org>
> Reported-by: Eric Sandeen <sandeen@sandeen.net>
> Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
> Cc: Dave Chinner <david@fromorbit.com>
> Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
> 
> ---
>  kernel/workqueue.c |   25 ++++++++-----------------
>  1 file changed, 8 insertions(+), 17 deletions(-)
> 
> --- a/kernel/workqueue.c
> +++ b/kernel/workqueue.c
> @@ -1841,17 +1841,11 @@ static void pool_mayday_timeout(unsigned
>   * spin_lock_irq(pool->lock) which may be released and regrabbed
>   * multiple times.  Does GFP_KERNEL allocations.  Called only from
>   * manager.
> - *
> - * Return:
> - * %false if no action was taken and pool->lock stayed locked, %true
> - * otherwise.
>   */
> -static bool maybe_create_worker(struct worker_pool *pool)
> +static void maybe_create_worker(struct worker_pool *pool)
>  __releases(&pool->lock)
>  __acquires(&pool->lock)
>  {
> -	if (!need_to_create_worker(pool))
> -		return false;
>  restart:
>  	spin_unlock_irq(&pool->lock);
>  
> @@ -1877,7 +1871,6 @@ restart:
>  	 */
>  	if (need_to_create_worker(pool))
>  		goto restart;
> -	return true;
>  }
>  
>  /**
> @@ -1897,16 +1890,14 @@ restart:
>   * multiple times.  Does GFP_KERNEL allocations.
>   *
>   * Return:
> - * %false if the pool don't need management and the caller can safely start
> - * processing works, %true indicates that the function released pool->lock
> - * and reacquired it to perform some management function and that the
> - * conditions that the caller verified while holding the lock before
> - * calling the function might no longer be true.
> + * %false if the pool doesn't need management and the caller can safely
> + * start processing works, %true if management function was performed and
> + * the conditions that the caller verified before calling the function may
> + * no longer be true.
>   */
>  static bool manage_workers(struct worker *worker)
>  {
>  	struct worker_pool *pool = worker->pool;
> -	bool ret = false;
>  
>  	/*
>  	 * Anyone who successfully grabs manager_arb wins the arbitration
> @@ -1919,12 +1910,12 @@ static bool manage_workers(struct worker
>  	 * actual management, the pool may stall indefinitely.
>  	 */
>  	if (!mutex_trylock(&pool->manager_arb))
> -		return ret;
> +		return false;
>  
> -	ret |= maybe_create_worker(pool);
> +	maybe_create_worker(pool);
>  
>  	mutex_unlock(&pool->manager_arb);
> -	return ret;
> +	return true;
>  }
>  
>  /**
> 
> 
> .
> 


^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28  1:51   ` Lai Jiangshan
@ 2015-01-28  2:24     ` Tejun Heo
  2015-01-28  3:15       ` Lai Jiangshan
  0 siblings, 1 reply; 72+ messages in thread
From: Tejun Heo @ 2015-01-28  2:24 UTC (permalink / raw)
  To: Lai Jiangshan
  Cc: Greg Kroah-Hartman, linux-kernel, stable, Eric Sandeen, Dave Chinner

On Wed, Jan 28, 2015 at 09:51:54AM +0800, Lai Jiangshan wrote:
> On 01/28/2015 09:26 AM, Greg Kroah-Hartman wrote:
> > 3.18-stable review patch.  If anyone has any objections, please let me know.
> 
> 
> I don't think it is a bug-fix.
> It is just a good cleanup.

It is a bug fix, for a rare but potentially critical issue.  Please
read the patch description.  It contains ample information on what's
broken and also the link to the original bug report.

Thanks.

-- 
tejun

^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28  2:24     ` Tejun Heo
@ 2015-01-28  3:15       ` Lai Jiangshan
  2015-01-28 15:07         ` Tejun Heo
  0 siblings, 1 reply; 72+ messages in thread
From: Lai Jiangshan @ 2015-01-28  3:15 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Greg Kroah-Hartman, linux-kernel, stable, Eric Sandeen, Dave Chinner

On 01/28/2015 10:24 AM, Tejun Heo wrote:
> On Wed, Jan 28, 2015 at 09:51:54AM +0800, Lai Jiangshan wrote:
>> On 01/28/2015 09:26 AM, Greg Kroah-Hartman wrote:
>>> 3.18-stable review patch.  If anyone has any objections, please let me know.
>>
>>
>> I don't think it is a bug-fix.
>> It is just a good cleanup.
> 
> It is a bug fix, for a rare but potentially critical issue.  Please
> read the patch description.  It contains ample information on what's
> broken and also the link to the original bug report.
> 

Sorry, you are right.

Was the bug introduced at the first time when maybe_create_worker() was
introduced?  Although manage_workers()/maybe_create_worker() was changed a bit,
the stable-tree team can simply make manage_workers() return true to fix
this bug for the very old kernel versions.


^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 00/61] 3.18.5-stable review
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (60 preceding siblings ...)
  2015-01-28  1:27 ` [PATCH 3.18 61/61] crypto: add missing crypto module aliases Greg Kroah-Hartman
@ 2015-01-28 14:15 ` Guenter Roeck
  2015-01-28 17:55   ` Greg Kroah-Hartman
  2015-01-28 16:50 ` Shuah Khan
  62 siblings, 1 reply; 72+ messages in thread
From: Guenter Roeck @ 2015-01-28 14:15 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, satoru.takeuchi, shuah.kh, stable

On 01/27/2015 05:26 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.5 release.
> There are 61 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Fri Jan 30 01:26:13 UTC 2015.
> Anything received after that time might be too late.
>

Build results:
	total: 134 pass: 134 fail: 0
Qemu tests:
	total: 30 pass: 30 fail: 0

Details are available at http://server.roeck-us.net:8010/builders.

Guenter


^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28  3:15       ` Lai Jiangshan
@ 2015-01-28 15:07         ` Tejun Heo
  2015-01-28 17:54           ` Greg Kroah-Hartman
  0 siblings, 1 reply; 72+ messages in thread
From: Tejun Heo @ 2015-01-28 15:07 UTC (permalink / raw)
  To: Lai Jiangshan
  Cc: Greg Kroah-Hartman, linux-kernel, stable, Eric Sandeen, Dave Chinner

On Wed, Jan 28, 2015 at 11:15:32AM +0800, Lai Jiangshan wrote:
> Was the bug introduced at the first time when maybe_create_worker() was
> introduced?  Although manage_workers()/maybe_create_worker() was changed a bit,
> the stable-tree team can simply make manage_workers() return true to fix
> this bug for the very old kernel versions.

Yes, this bug has been there from the beginning of cmwq.  I'm
attaching a patch which is for before the removal of
maybe_destory_worker().

Thanks.

Subject: [PATCH] workqueue: fix subtle pool management issue which can stall whole worker_pool

A worker_pool's forward progress is guaranteed by the fact that the
last idle worker assumes the manager role to create more workers and
summon the rescuers if creating workers doesn't succeed in timely
manner before proceeding to execute work items.

This manager role is implemented in manage_workers(), which indicates
whether the worker may proceed to work item execution with its return
value.  This is necessary because multiple workers may contend for the
manager role, and, if there already is a manager, others should
proceed to work item execution.

Unfortunately, the function also indicates that the worker may proceed
to work item execution if need_to_create_worker() is false at the head
of the function.  need_to_create_worker() tests the following
conditions.

	pending work items && !nr_running && !nr_idle

The first and third conditions are protected by pool->lock and thus
won't change while holding pool->lock; however, nr_running can change
asynchronously as other workers block and resume and while it's likely
to be zero, as someone woke this worker up in the first place, some
other workers could have become runnable inbetween making it non-zero.

If this happens, manage_worker() could return false even with zero
nr_idle making the worker, the last idle one, proceed to execute work
items.  If then all workers of the pool end up blocking on a resource
which can only be released by a work item which is pending on that
pool, the whole pool can deadlock as there's no one to create more
workers or summon the rescuers.

This patch fixes the problem by removing the early exit condition from
maybe_create_worker() and making manage_workers() return false iff
there's already another manager, which ensures that the last worker
doesn't start executing work items.

We can leave the early exit condition alone and just ignore the return
value but the only reason it was put there is because the
manage_workers() used to perform both creations and destructions of
workers and thus the function may be invoked while the pool is trying
to reduce the number of workers.  Now that manage_workers() is called
only when more workers are needed, the only case this early exit
condition is triggered is rare race conditions rendering it pointless.

Tested with simulated workload and modified workqueue code which
trigger the pool deadlock reliably without this patch.

tj: Updated to v3.10 where manage_workers() is responsible not only
    for creating more workers but also destroying surplus ones.
    maybe_create_worker() needs to keep its early exit condition to
    avoid creating a new worker when manage_workers() is called to
    destroy surplus ones.  Other than that, the adaptabion is
    straight-forward.  Both maybe_{create|destroy}_worker() functions
    are converted to return void and manage_workers() returns %false
    iff it lost manager arbitration.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: stable@vger.kernel.org
---
 kernel/workqueue.c |   39 +++++++++++++--------------------------
 1 file changed, 13 insertions(+), 26 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 14a7163..e117fa3 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1921,17 +1921,13 @@ static void pool_mayday_timeout(unsigned long __pool)
  * spin_lock_irq(pool->lock) which may be released and regrabbed
  * multiple times.  Does GFP_KERNEL allocations.  Called only from
  * manager.
- *
- * RETURNS:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
  */
-static bool maybe_create_worker(struct worker_pool *pool)
+static void maybe_create_worker(struct worker_pool *pool)
 __releases(&pool->lock)
 __acquires(&pool->lock)
 {
 	if (!need_to_create_worker(pool))
-		return false;
+		return;
 restart:
 	spin_unlock_irq(&pool->lock);
 
@@ -1948,7 +1944,7 @@ restart:
 			start_worker(worker);
 			if (WARN_ON_ONCE(need_to_create_worker(pool)))
 				goto restart;
-			return true;
+			return;
 		}
 
 		if (!need_to_create_worker(pool))
@@ -1965,7 +1961,7 @@ restart:
 	spin_lock_irq(&pool->lock);
 	if (need_to_create_worker(pool))
 		goto restart;
-	return true;
+	return;
 }
 
 /**
@@ -1978,15 +1974,9 @@ restart:
  * LOCKING:
  * spin_lock_irq(pool->lock) which may be released and regrabbed
  * multiple times.  Called only from manager.
- *
- * RETURNS:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
  */
-static bool maybe_destroy_workers(struct worker_pool *pool)
+static void maybe_destroy_workers(struct worker_pool *pool)
 {
-	bool ret = false;
-
 	while (too_many_workers(pool)) {
 		struct worker *worker;
 		unsigned long expires;
@@ -2000,10 +1990,7 @@ static bool maybe_destroy_workers(struct worker_pool *pool)
 		}
 
 		destroy_worker(worker);
-		ret = true;
 	}
-
-	return ret;
 }
 
 /**
@@ -2023,13 +2010,14 @@ static bool maybe_destroy_workers(struct worker_pool *pool)
  * multiple times.  Does GFP_KERNEL allocations.
  *
  * RETURNS:
- * spin_lock_irq(pool->lock) which may be released and regrabbed
- * multiple times.  Does GFP_KERNEL allocations.
+ * %false if the pool doesn't need management and the caller can safely
+ * start processing works, %true if management function was performed and
+ * the conditions that the caller verified before calling the function may
+ * no longer be true.
  */
 static bool manage_workers(struct worker *worker)
 {
 	struct worker_pool *pool = worker->pool;
-	bool ret = false;
 
 	/*
 	 * Managership is governed by two mutexes - manager_arb and
@@ -2053,7 +2041,7 @@ static bool manage_workers(struct worker *worker)
 	 * manager_mutex.
 	 */
 	if (!mutex_trylock(&pool->manager_arb))
-		return ret;
+		return false;
 
 	/*
 	 * With manager arbitration won, manager_mutex would be free in
@@ -2063,7 +2051,6 @@ static bool manage_workers(struct worker *worker)
 		spin_unlock_irq(&pool->lock);
 		mutex_lock(&pool->manager_mutex);
 		spin_lock_irq(&pool->lock);
-		ret = true;
 	}
 
 	pool->flags &= ~POOL_MANAGE_WORKERS;
@@ -2072,12 +2059,12 @@ static bool manage_workers(struct worker *worker)
 	 * Destroy and then create so that may_start_working() is true
 	 * on return.
 	 */
-	ret |= maybe_destroy_workers(pool);
-	ret |= maybe_create_worker(pool);
+	maybe_destroy_workers(pool);
+	maybe_create_worker(pool);
 
 	mutex_unlock(&pool->manager_mutex);
 	mutex_unlock(&pool->manager_arb);
-	return ret;
+	return true;
 }
 
 /**

^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 00/61] 3.18.5-stable review
  2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
                   ` (61 preceding siblings ...)
  2015-01-28 14:15 ` [PATCH 3.18 00/61] 3.18.5-stable review Guenter Roeck
@ 2015-01-28 16:50 ` Shuah Khan
  62 siblings, 0 replies; 72+ messages in thread
From: Shuah Khan @ 2015-01-28 16:50 UTC (permalink / raw)
  To: Greg Kroah-Hartman, linux-kernel
  Cc: torvalds, akpm, linux, satoru.takeuchi, shuah.kh, stable

On 01/27/2015 06:26 PM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 3.18.5 release.
> There are 61 patches in this series, all will be posted as a response
> to this one.  If anyone has any issues with these being applied, please
> let me know.
> 
> Responses should be made by Fri Jan 30 01:26:13 UTC 2015.
> Anything received after that time might be too late.
> 
> The whole patch series can be found in one patch at:
> 	kernel.org/pub/linux/kernel/v3.0/stable-review/patch-3.18.5-rc1.gz
> and the diffstat can be found below.
> 
> thanks,
> 
> greg k-h
> 

Compiled and booted on my test system. No dmesg regressions.

thanks,
-- Shuah


-- 
Shuah Khan
Sr. Linux Kernel Developer
Open Source Innovation Group
Samsung Research America (Silicon Valley)
shuahkh@osg.samsung.com | (970) 217-8978

^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28 15:07         ` Tejun Heo
@ 2015-01-28 17:54           ` Greg Kroah-Hartman
  2015-01-29 20:33             ` Tejun Heo
  0 siblings, 1 reply; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28 17:54 UTC (permalink / raw)
  To: Tejun Heo; +Cc: Lai Jiangshan, linux-kernel, stable, Eric Sandeen, Dave Chinner

On Wed, Jan 28, 2015 at 10:07:01AM -0500, Tejun Heo wrote:
> On Wed, Jan 28, 2015 at 11:15:32AM +0800, Lai Jiangshan wrote:
> > Was the bug introduced at the first time when maybe_create_worker() was
> > introduced?  Although manage_workers()/maybe_create_worker() was changed a bit,
> > the stable-tree team can simply make manage_workers() return true to fix
> > this bug for the very old kernel versions.
> 
> Yes, this bug has been there from the beginning of cmwq.  I'm
> attaching a patch which is for before the removal of
> maybe_destory_worker().

This patch will apply to 3.10, but not 3.14, and I'm confused.  Should I
backport the original version to 3.14?  3.10?  Use this different
version instead?

confused,

greg k-h

^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 00/61] 3.18.5-stable review
  2015-01-28 14:15 ` [PATCH 3.18 00/61] 3.18.5-stable review Guenter Roeck
@ 2015-01-28 17:55   ` Greg Kroah-Hartman
  0 siblings, 0 replies; 72+ messages in thread
From: Greg Kroah-Hartman @ 2015-01-28 17:55 UTC (permalink / raw)
  To: Guenter Roeck
  Cc: linux-kernel, torvalds, akpm, satoru.takeuchi, shuah.kh, stable

On Wed, Jan 28, 2015 at 06:15:39AM -0800, Guenter Roeck wrote:
> On 01/27/2015 05:26 PM, Greg Kroah-Hartman wrote:
> >This is the start of the stable review cycle for the 3.18.5 release.
> >There are 61 patches in this series, all will be posted as a response
> >to this one.  If anyone has any issues with these being applied, please
> >let me know.
> >
> >Responses should be made by Fri Jan 30 01:26:13 UTC 2015.
> >Anything received after that time might be too late.
> >
> 
> Build results:
> 	total: 134 pass: 134 fail: 0
> Qemu tests:
> 	total: 30 pass: 30 fail: 0
> 
> Details are available at http://server.roeck-us.net:8010/builders.

Thanks for testing all 3 of these and letting me know.

greg k-h

^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-28 17:54           ` Greg Kroah-Hartman
@ 2015-01-29 20:33             ` Tejun Heo
  2015-02-02 11:28               ` Luis Henriques
  0 siblings, 1 reply; 72+ messages in thread
From: Tejun Heo @ 2015-01-29 20:33 UTC (permalink / raw)
  To: Greg Kroah-Hartman
  Cc: Lai Jiangshan, linux-kernel, stable, Eric Sandeen, Dave Chinner

Hello,

On Wed, Jan 28, 2015 at 09:54:48AM -0800, Greg Kroah-Hartman wrote:
> This patch will apply to 3.10, but not 3.14, and I'm confused.  Should I
> backport the original version to 3.14?  3.10?  Use this different
> version instead?

The original version should apply fine back to 3.16.  Before that, the
modified patch should be used.  I thought it'd apply to 3.14 too.
Checking... ah, okay, I generated the backported patch against the
rhel7 kernel which is 3.10 based and there were some cosmetical
context changes between then and 3.14.  The patch for 3.14 follows.

Thanks.

------ 8< ------
Subject: [PATCH] workqueue: fix subtle pool management issue which can stall whole worker_pool

A worker_pool's forward progress is guaranteed by the fact that the
last idle worker assumes the manager role to create more workers and
summon the rescuers if creating workers doesn't succeed in timely
manner before proceeding to execute work items.

This manager role is implemented in manage_workers(), which indicates
whether the worker may proceed to work item execution with its return
value.  This is necessary because multiple workers may contend for the
manager role, and, if there already is a manager, others should
proceed to work item execution.

Unfortunately, the function also indicates that the worker may proceed
to work item execution if need_to_create_worker() is false at the head
of the function.  need_to_create_worker() tests the following
conditions.

        pending work items && !nr_running && !nr_idle

The first and third conditions are protected by pool->lock and thus
won't change while holding pool->lock; however, nr_running can change
asynchronously as other workers block and resume and while it's likely
to be zero, as someone woke this worker up in the first place, some
other workers could have become runnable inbetween making it non-zero.

If this happens, manage_worker() could return false even with zero
nr_idle making the worker, the last idle one, proceed to execute work
items.  If then all workers of the pool end up blocking on a resource
which can only be released by a work item which is pending on that
pool, the whole pool can deadlock as there's no one to create more
workers or summon the rescuers.

This patch fixes the problem by removing the early exit condition from
maybe_create_worker() and making manage_workers() return false iff
there's already another manager, which ensures that the last worker
doesn't start executing work items.

We can leave the early exit condition alone and just ignore the return
value but the only reason it was put there is because the
manage_workers() used to perform both creations and destructions of
workers and thus the function may be invoked while the pool is trying
to reduce the number of workers.  Now that manage_workers() is called
only when more workers are needed, the only case this early exit
condition is triggered is rare race conditions rendering it pointless.

Tested with simulated workload and modified workqueue code which
trigger the pool deadlock reliably without this patch.

tj: Updated to v3.14 where manage_workers() is responsible not only
    for creating more workers but also destroying surplus ones.
    maybe_create_worker() needs to keep its early exit condition to
    avoid creating a new worker when manage_workers() is called to
    destroy surplus ones.  Other than that, the adaptabion is
    straight-forward.  Both maybe_{create|destroy}_worker() functions
    are converted to return void and manage_workers() returns %false
    iff it lost manager arbitration.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
Cc: stable@vger.kernel.org

---
 kernel/workqueue.c |   42 +++++++++++++-----------------------------
 1 file changed, 13 insertions(+), 29 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 193e977..8e7701b 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1956,17 +1956,13 @@ static void pool_mayday_timeout(unsigned long __pool)
  * spin_lock_irq(pool->lock) which may be released and regrabbed
  * multiple times.  Does GFP_KERNEL allocations.  Called only from
  * manager.
- *
- * Return:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
  */
-static bool maybe_create_worker(struct worker_pool *pool)
+static void maybe_create_worker(struct worker_pool *pool)
 __releases(&pool->lock)
 __acquires(&pool->lock)
 {
 	if (!need_to_create_worker(pool))
-		return false;
+		return;
 restart:
 	spin_unlock_irq(&pool->lock);
 
@@ -1983,7 +1979,7 @@ restart:
 			start_worker(worker);
 			if (WARN_ON_ONCE(need_to_create_worker(pool)))
 				goto restart;
-			return true;
+			return;
 		}
 
 		if (!need_to_create_worker(pool))
@@ -2000,7 +1996,7 @@ restart:
 	spin_lock_irq(&pool->lock);
 	if (need_to_create_worker(pool))
 		goto restart;
-	return true;
+	return;
 }
 
 /**
@@ -2013,15 +2009,9 @@ restart:
  * LOCKING:
  * spin_lock_irq(pool->lock) which may be released and regrabbed
  * multiple times.  Called only from manager.
- *
- * Return:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
  */
-static bool maybe_destroy_workers(struct worker_pool *pool)
+static void maybe_destroy_workers(struct worker_pool *pool)
 {
-	bool ret = false;
-
 	while (too_many_workers(pool)) {
 		struct worker *worker;
 		unsigned long expires;
@@ -2035,10 +2025,7 @@ static bool maybe_destroy_workers(struct worker_pool *pool)
 		}
 
 		destroy_worker(worker);
-		ret = true;
 	}
-
-	return ret;
 }
 
 /**
@@ -2058,16 +2045,14 @@ static bool maybe_destroy_workers(struct worker_pool *pool)
  * multiple times.  Does GFP_KERNEL allocations.
  *
  * Return:
- * %false if the pool don't need management and the caller can safely start
- * processing works, %true indicates that the function released pool->lock
- * and reacquired it to perform some management function and that the
- * conditions that the caller verified while holding the lock before
- * calling the function might no longer be true.
+ * %false if the pool doesn't need management and the caller can safely
+ * start processing works, %true if management function was performed and
+ * the conditions that the caller verified before calling the function may
+ * no longer be true.
  */
 static bool manage_workers(struct worker *worker)
 {
 	struct worker_pool *pool = worker->pool;
-	bool ret = false;
 
 	/*
 	 * Managership is governed by two mutexes - manager_arb and
@@ -2091,7 +2076,7 @@ static bool manage_workers(struct worker *worker)
 	 * manager_mutex.
 	 */
 	if (!mutex_trylock(&pool->manager_arb))
-		return ret;
+		return false;
 
 	/*
 	 * With manager arbitration won, manager_mutex would be free in
@@ -2101,7 +2086,6 @@ static bool manage_workers(struct worker *worker)
 		spin_unlock_irq(&pool->lock);
 		mutex_lock(&pool->manager_mutex);
 		spin_lock_irq(&pool->lock);
-		ret = true;
 	}
 
 	pool->flags &= ~POOL_MANAGE_WORKERS;
@@ -2110,12 +2094,12 @@ static bool manage_workers(struct worker *worker)
 	 * Destroy and then create so that may_start_working() is true
 	 * on return.
 	 */
-	ret |= maybe_destroy_workers(pool);
-	ret |= maybe_create_worker(pool);
+	maybe_destroy_workers(pool);
+	maybe_create_worker(pool);
 
 	mutex_unlock(&pool->manager_mutex);
 	mutex_unlock(&pool->manager_arb);
-	return ret;
+	return true;
 }
 
 /**

^ permalink raw reply	[flat|nested] 72+ messages in thread

* Re: [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool
  2015-01-29 20:33             ` Tejun Heo
@ 2015-02-02 11:28               ` Luis Henriques
  0 siblings, 0 replies; 72+ messages in thread
From: Luis Henriques @ 2015-02-02 11:28 UTC (permalink / raw)
  To: Tejun Heo
  Cc: Greg Kroah-Hartman, Lai Jiangshan, linux-kernel, stable,
	Eric Sandeen, Dave Chinner

On Thu, Jan 29, 2015 at 03:33:25PM -0500, Tejun Heo wrote:
> Hello,
> 
> On Wed, Jan 28, 2015 at 09:54:48AM -0800, Greg Kroah-Hartman wrote:
> > This patch will apply to 3.10, but not 3.14, and I'm confused.  Should I
> > backport the original version to 3.14?  3.10?  Use this different
> > version instead?
> 
> The original version should apply fine back to 3.16.

Thank you, Tejun.  There's just a change to the original patch that is
required: replace a 'return true' by a 'return' in
maybe_create_worker(), as it's now a void function.  I'm queuing the
backport below for the 3.16 kernel.

Cheers,
--
Luís

>From a7560f50af732a69d0650d002799b7cd142ee998 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Fri, 16 Jan 2015 14:21:16 -0500
Subject: [PATCH] workqueue: fix subtle pool management issue which can stall
 whole worker_pool

commit 29187a9eeaf362d8422e62e17a22a6e115277a49 upstream.

A worker_pool's forward progress is guaranteed by the fact that the
last idle worker assumes the manager role to create more workers and
summon the rescuers if creating workers doesn't succeed in timely
manner before proceeding to execute work items.

This manager role is implemented in manage_workers(), which indicates
whether the worker may proceed to work item execution with its return
value.  This is necessary because multiple workers may contend for the
manager role, and, if there already is a manager, others should
proceed to work item execution.

Unfortunately, the function also indicates that the worker may proceed
to work item execution if need_to_create_worker() is false at the head
of the function.  need_to_create_worker() tests the following
conditions.

	pending work items && !nr_running && !nr_idle

The first and third conditions are protected by pool->lock and thus
won't change while holding pool->lock; however, nr_running can change
asynchronously as other workers block and resume and while it's likely
to be zero, as someone woke this worker up in the first place, some
other workers could have become runnable inbetween making it non-zero.

If this happens, manage_worker() could return false even with zero
nr_idle making the worker, the last idle one, proceed to execute work
items.  If then all workers of the pool end up blocking on a resource
which can only be released by a work item which is pending on that
pool, the whole pool can deadlock as there's no one to create more
workers or summon the rescuers.

This patch fixes the problem by removing the early exit condition from
maybe_create_worker() and making manage_workers() return false iff
there's already another manager, which ensures that the last worker
doesn't start executing work items.

We can leave the early exit condition alone and just ignore the return
value but the only reason it was put there is because the
manage_workers() used to perform both creations and destructions of
workers and thus the function may be invoked while the pool is trying
to reduce the number of workers.  Now that manage_workers() is called
only when more workers are needed, the only case this early exit
condition is triggered is rare race conditions rendering it pointless.

Tested with simulated workload and modified workqueue code which
trigger the pool deadlock reliably without this patch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: Eric Sandeen <sandeen@sandeen.net>
Link: http://lkml.kernel.org/g/54B019F4.8030009@sandeen.net
Cc: Dave Chinner <david@fromorbit.com>
Cc: Lai Jiangshan <laijs@cn.fujitsu.com>
[ luis: backported to 3.16:
  - maybe_create_worker() is now void, 'return' instead of 'return true' ]
Signed-off-by: Luis Henriques <luis.henriques@canonical.com>
---
 kernel/workqueue.c | 27 +++++++++------------------
 1 file changed, 9 insertions(+), 18 deletions(-)

diff --git a/kernel/workqueue.c b/kernel/workqueue.c
index 35974ac69600..df106f238d58 100644
--- a/kernel/workqueue.c
+++ b/kernel/workqueue.c
@@ -1891,17 +1891,11 @@ static void pool_mayday_timeout(unsigned long __pool)
  * spin_lock_irq(pool->lock) which may be released and regrabbed
  * multiple times.  Does GFP_KERNEL allocations.  Called only from
  * manager.
- *
- * Return:
- * %false if no action was taken and pool->lock stayed locked, %true
- * otherwise.
  */
-static bool maybe_create_worker(struct worker_pool *pool)
+static void maybe_create_worker(struct worker_pool *pool)
 __releases(&pool->lock)
 __acquires(&pool->lock)
 {
-	if (!need_to_create_worker(pool))
-		return false;
 restart:
 	spin_unlock_irq(&pool->lock);
 
@@ -1918,7 +1912,7 @@ restart:
 			start_worker(worker);
 			if (WARN_ON_ONCE(need_to_create_worker(pool)))
 				goto restart;
-			return true;
+			return;
 		}
 
 		if (!need_to_create_worker(pool))
@@ -1935,7 +1929,6 @@ restart:
 	spin_lock_irq(&pool->lock);
 	if (need_to_create_worker(pool))
 		goto restart;
-	return true;
 }
 
 /**
@@ -1955,16 +1948,14 @@ restart:
  * multiple times.  Does GFP_KERNEL allocations.
  *
  * Return:
- * %false if the pool don't need management and the caller can safely start
- * processing works, %true indicates that the function released pool->lock
- * and reacquired it to perform some management function and that the
- * conditions that the caller verified while holding the lock before
- * calling the function might no longer be true.
+ * %false if the pool doesn't need management and the caller can safely
+ * start processing works, %true if management function was performed and
+ * the conditions that the caller verified before calling the function may
+ * no longer be true.
  */
 static bool manage_workers(struct worker *worker)
 {
 	struct worker_pool *pool = worker->pool;
-	bool ret = false;
 
 	/*
 	 * Anyone who successfully grabs manager_arb wins the arbitration
@@ -1977,12 +1968,12 @@ static bool manage_workers(struct worker *worker)
 	 * actual management, the pool may stall indefinitely.
 	 */
 	if (!mutex_trylock(&pool->manager_arb))
-		return ret;
+		return false;
 
-	ret |= maybe_create_worker(pool);
+	maybe_create_worker(pool);
 
 	mutex_unlock(&pool->manager_arb);
-	return ret;
+	return true;
 }
 
 /**
-- 
2.1.4


^ permalink raw reply	[flat|nested] 72+ messages in thread

end of thread, other threads:[~2015-02-02 11:27 UTC | newest]

Thread overview: 72+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2015-01-28  1:26 [PATCH 3.18 00/61] 3.18.5-stable review Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 01/61] can: dev: fix crtlmode_supported check Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 02/61] can: m_can: tag current CAN FD controllers as non-ISO Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 03/61] pinctrl: qcom: Dont iterate past end of function array Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 04/61] pinctrl: Fix two deadlocks Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 05/61] mfd: tps65218: Make INT[12] and STATUS registers volatile Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 06/61] mfd: tps65218: Make INT1 our status_base register Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 07/61] mfd: rtsx_usb: Fix runtime PM deadlock Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 08/61] libata: allow sata_sil24 to opt-out of tag ordered submission Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 09/61] libata: prevent HSM state change race between ISR and PIO Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 10/61] ALSA: usb-audio: Add mic volume fix quirk for Logitech Webcam C210 Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 11/61] workqueue: fix subtle pool management issue which can stall whole worker_pool Greg Kroah-Hartman
2015-01-28  1:51   ` Lai Jiangshan
2015-01-28  2:24     ` Tejun Heo
2015-01-28  3:15       ` Lai Jiangshan
2015-01-28 15:07         ` Tejun Heo
2015-01-28 17:54           ` Greg Kroah-Hartman
2015-01-29 20:33             ` Tejun Heo
2015-02-02 11:28               ` Luis Henriques
2015-01-28  1:26 ` [PATCH 3.18 12/61] scripts/recordmcount.pl: There is no -m32 gcc option on Super-H anymore Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 13/61] drm/i915: Ban Haswell from using RCS flips Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 14/61] drm/i915: Fix mutex->owner inspection race under DEBUG_MUTEXES Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 15/61] drm/radeon: add a dpm quirk list Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 16/61] drm/radeon: add si " Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 17/61] drm/radeon: use rv515_ring_start on r5xx Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 18/61] PCI: Pass bridge device, not bus, when updating bridge windows Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 19/61] PCI: Add pci_claim_bridge_resource() to clip window if necessary Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 20/61] PCI: Add pci_bus_clip_resource() to clip to fit upstream window Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 21/61] x86/PCI: Clip bridge windows to fit in upstream windows Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 22/61] PCI: Add flag for devices where we cant use bus reset Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 23/61] PCI: Mark Atheros AR93xx to avoid " Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 24/61] ipr: wait for aborted command responses Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 25/61] [media] cx23885: Split Hauppauge WinTV Starburst from HVR4400 card entry Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 26/61] [media] vb2: fix vb2_thread_stop race conditions Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 27/61] dm cache: share cache-metadata object across inactive and active DM tables Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 28/61] dm cache: fix problematic dual use of a single migration count variable Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 29/61] irqchip: omap-intc: Fix legacy DMA regression Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 30/61] time: settimeofday: Validate the values of tv from user Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 31/61] time: adjtimex: Validate the ADJ_FREQUENCY values Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 32/61] ARM: dts: imx25: Fix PWM "per" clocks Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 33/61] ARM: mvebu: completely disable hardware I/O coherency Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 34/61] bus: mvebu-mbus: fix support of MBus window 13 Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 35/61] fix deadlock in cifs_ioctl_clone() Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 36/61] irqchip: atmel-aic-common: Prevent clobbering of priority when changing IRQ type Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 37/61] x86, irq: Properly tag virtualization entry in /proc/interrupts Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 38/61] clocksource: exynos_mct: Fix bitmask regression for exynos4_mct_write Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 39/61] x86, hyperv: Mark the Hyper-V clocksource as being continuous Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 40/61] x86/tsc: Change Fast TSC calibration failed from error to info Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 41/61] x86, boot: Skip relocs when load address unchanged Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 42/61] KVM: x86: SYSENTER emulation is broken Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 43/61] KVM: x86: Fix of previously incomplete fix for CVE-2014-8480 Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 44/61] x86, tls, ldt: Stop checking lm in LDT_empty Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 45/61] x86, tls: Interpret an all-zero struct user_desc as "no segment" Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 46/61] x86/apic: Re-enable PCI_MSI support for non-SMP X86_32 Greg Kroah-Hartman
2015-01-28  1:26 ` [PATCH 3.18 47/61] sata_dwc_460ex: fix resource leak on error path Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 48/61] ahci_xgene: Fix the endianess issue in APM X-Gene SoC AHCI SATA controller driver Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 49/61] KEYS: close race between key lookup and freeing Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 50/61] mm: get rid of radix tree gfp mask for pagecache_get_page Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 51/61] netfilter: nfnetlink: validate nfnetlink header from batch Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 52/61] netfilter: nf_tables: fix flush ruleset chain dependencies Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 53/61] netfilter: nfnetlink: relax strict multicast group check from netlink_bind Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 54/61] netfilter: conntrack: fix race between confirmation and flush Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 55/61] ipvs: uninitialized data with IP_VS_IPV6 Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 56/61] Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single" Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 57/61] iwlwifi: mvm: add a flag to enable match found notification Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 58/61] ACPI / PM: Do not disable wakeup GPEs that have not been enabled Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 59/61] crypto: prefix module autoloading with "crypto-" Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 60/61] crypto: include crypto- module prefix in template Greg Kroah-Hartman
2015-01-28  1:27 ` [PATCH 3.18 61/61] crypto: add missing crypto module aliases Greg Kroah-Hartman
2015-01-28 14:15 ` [PATCH 3.18 00/61] 3.18.5-stable review Guenter Roeck
2015-01-28 17:55   ` Greg Kroah-Hartman
2015-01-28 16:50 ` Shuah Khan

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).