LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Johan Hovold <johan@kernel.org>
To: Peter Hung <hpeter@gmail.com>
Cc: johan@kernel.org, gregkh@linuxfoundation.org,
	linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
	tom_tsai@fintek.com.tw, peter_hong@fintek.com.tw,
	Peter Hung <hpeter+linux_kernel@gmail.com>
Subject: Re: [PATCH v4 3/7] usb: serial: implement read IIR/MSR ep for F81232
Date: Wed, 4 Feb 2015 13:41:28 +0100	[thread overview]
Message-ID: <20150204124128.GC13757@localhost> (raw)
In-Reply-To: <1422598421-6236-3-git-send-email-hpeter+linux_kernel@gmail.com>

On Fri, Jan 30, 2015 at 02:13:37PM +0800, Peter Hung wrote:
> The F81232 interrupt ep will continuously report IIR register value.
> We had implement the interrupt callback to read IIR, If noticed with
> MSR change, we will call worker to read MSR later.
> 
> Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com>
> ---
>  drivers/usb/serial/f81232.c | 114 +++++++++++++++++++++++++++++++++++++++++---
>  1 file changed, 107 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/usb/serial/f81232.c b/drivers/usb/serial/f81232.c
> index 9ef9775..274120d 100644
> --- a/drivers/usb/serial/f81232.c
> +++ b/drivers/usb/serial/f81232.c
> @@ -23,6 +23,7 @@
>  #include <linux/uaccess.h>
>  #include <linux/usb.h>
>  #include <linux/usb/serial.h>
> +#include <linux/serial_reg.h>
>  
>  static const struct usb_device_id id_table[] = {
>  	{ USB_DEVICE(0x1934, 0x0706) },
> @@ -44,23 +45,112 @@ MODULE_DEVICE_TABLE(usb, id_table);
>  #define UART_OVERRUN_ERROR		0x40
>  #define UART_CTS			0x80

Now that your including serial_req and using the standard register
masks, you should remove the old (incorrect ones) at some point. Most
are left unused after the whole series has been applied (except UART_DCD
and that looks like a bug).

>  
> +#define REGISTER_REQUEST 0xA0
> +#define GET_REGISTER 0xc0
> +#define SET_REGISTER 0x40

Add a F81232-prefix to these (and other driver specific defines), and a
new line before the time out.

> +#define F81232_USB_TIMEOUT 3000
> +
> +#define SERIAL_BASE_ADDRESS	   (0x0120)

No parentheses.

> +#define MODEM_STATUS_REGISTER      (0x06 + SERIAL_BASE_ADDRESS)

Missing newline.

>  struct f81232_private {
>  	spinlock_t lock;
>  	u8 line_control;
>  	u8 line_status;

How about renaming this one modem_status?

> +
> +	struct work_struct int_worker;

Call this one interrupt_work instead.

> +	struct usb_serial_port *port;
>  };
>  
> +static inline int f81232_get_register(struct usb_device *dev,
> +							  u16 reg, u8 *data)

Let the compiler decide whether this should be inlined.

Should should probably also pass the usb-serial port rather than
usb_device and use &port->dev for the error message.

> +{
> +	int status;
> +
> +	status = usb_control_msg(dev,
> +			 usb_rcvctrlpipe(dev, 0),
> +			 REGISTER_REQUEST,
> +			 GET_REGISTER,
> +			 reg,
> +			 0,
> +			 data,
> +			 sizeof(*data),
> +			 F81232_USB_TIMEOUT);
> +
> +	if (status < 0) {
> +		dev_dbg(&dev->dev,
> +			"%s status: %d\n", __func__, status);

dev_err.

Is the line break needed still?

> +	}
> +
> +	return status;
> +}
> +
> +static void f81232_read_msr(struct f81232_private *priv)
> +{
> +	int status;
> +	unsigned long flags;
> +	u8 current_msr, old_msr;
> +	struct usb_device *dev = priv->port->serial->dev;
> +	struct tty_struct *tty;
> +
> +	status = f81232_get_register(dev, MODEM_STATUS_REGISTER, &current_msr);
> +

No newline before checking the return value. Comment applies to whole series.

> +	if (status < 0) {
> +		dev_dbg(&dev->dev, "%s fail, status: %d\n", __func__, status);
> +		return;
> +	}

You already logged the error in get_register, but use dev_err (and
&port->dev) if you want this here.

> +
> +	spin_lock_irqsave(&priv->lock, flags);
> +	old_msr = priv->line_status;
> +	spin_unlock_irqrestore(&priv->lock, flags);

You never use old_msr so just drop this bit.

> +
> +	if (current_msr & UART_MSR_ANY_DELTA) {

Just return unless there has been a change and reduce the indentation
below.

> +		tty = tty_port_tty_get(&priv->port->port);
> +
> +		if (tty) {
> +			if (current_msr & UART_MSR_DDCD) {
> +				usb_serial_handle_dcd_change(priv->port,
> +					tty, current_msr & UART_MSR_DCD);
> +			}
> +
> +			tty_kref_put(tty);
> +		}
> +
> +		spin_lock_irqsave(&priv->lock, flags);
> +		priv->line_status = current_msr;
> +		spin_unlock_irqrestore(&priv->lock, flags);
> +
> +		wake_up_interruptible(&priv->port->port.delta_msr_wait);
> +	}
> +
> +	dev_dbg(&dev->dev, "%s: %x\n", __func__, priv->line_status);
> +}

Missing newline.

>  static void f81232_update_line_status(struct usb_serial_port *port,
>  				      unsigned char *data,
>  				      unsigned int actual_length)
>  {
> -	/*
> -	 * FIXME: Update port->icount, and call
> -	 *
> -	 *		wake_up_interruptible(&port->port.delta_msr_wait);
> -	 *
> -	 *	  on MSR changes.
> -	 */
> +	struct f81232_private *priv = usb_get_serial_port_data(port);
> +	struct usb_device *dev = port->serial->dev;

Use &port->dev for debugging and drop this one.

> +
> +	if (!actual_length)
> +		return;
> +
> +	switch (data[0] & 0x07) {
> +	case 0x00: /* msr change */
> +		dev_dbg(&dev->dev, "IIR: MSR Change: %x\n", data[0]);
> +		schedule_work(&priv->int_worker);
> +		break;
> +

I'd drop the newlines after break.

> +	case 0x02: /* tx-empty */
> +		break;
> +
> +	case 0x04: /* rx data available */
> +		break;
> +
> +	case 0x06: /* lsr change */
> +		/* we can forget it. the LSR will read from bulk-in */
> +		dev_dbg(&dev->dev, "IIR: LSR Change: %x\n", data[0]);
> +		break;
> +	}
>  }
>  
>  static void f81232_read_int_callback(struct urb *urb)
> @@ -270,6 +360,14 @@ static int f81232_ioctl(struct tty_struct *tty,
>  	return -ENOIOCTLCMD;
>  }
>  
> +static void f81232_int_work_wq(struct work_struct *work)

Rename this f81232_interrupt_work.

> +{
> +	struct f81232_private *priv =
> +		container_of(work, struct f81232_private, int_worker);
> +
> +	f81232_read_msr(priv);
> +}
> +
>  static int f81232_port_probe(struct usb_serial_port *port)
>  {
>  	struct f81232_private *priv;
> @@ -279,10 +377,12 @@ static int f81232_port_probe(struct usb_serial_port *port)
>  		return -ENOMEM;
>  
>  	spin_lock_init(&priv->lock);
> +	INIT_WORK(&priv->int_worker, f81232_int_work_wq);
>  
>  	usb_set_serial_port_data(port, priv);
>  
>  	port->port.drain_delay = 256;
> +	priv->port = port;
>  
>  	return 0;
>  }

This already looks much better, thanks for resending.

Johan

  reply	other threads:[~2015-02-04 12:41 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-01-30  6:13 [PATCH v4 1/7] usb: serial: modify bulk-in/out size " Peter Hung
2015-01-30  6:13 ` [PATCH v4 2/7] usb: serial: modify author " Peter Hung
2015-02-04 11:31   ` Johan Hovold
2015-01-30  6:13 ` [PATCH v4 3/7] usb: serial: implement read IIR/MSR ep " Peter Hung
2015-02-04 12:41   ` Johan Hovold [this message]
2015-01-30  6:13 ` [PATCH v4 4/7] usb: serial: reimplement RX bulk-in " Peter Hung
2015-02-04 12:51   ` Johan Hovold
2015-01-30  6:13 ` [PATCH v4 5/7] usb: serial: implement set_termios " Peter Hung
2015-02-04 15:29   ` Johan Hovold
2015-01-30  6:13 ` [PATCH v4 6/7] usb: serial: implement MCR/MSR function " Peter Hung
2015-02-04 15:55   ` Johan Hovold
2015-01-30  6:13 ` [PATCH v4 7/7] usb: serial: modify ioctl TIOCGSERIAL " Peter Hung
2015-02-04 16:27   ` Johan Hovold
2015-02-04 11:23 ` [PATCH v4 1/7] usb: serial: modify bulk-in/out size " Johan Hovold

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150204124128.GC13757@localhost \
    --to=johan@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=hpeter+linux_kernel@gmail.com \
    --cc=hpeter@gmail.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-usb@vger.kernel.org \
    --cc=peter_hong@fintek.com.tw \
    --cc=tom_tsai@fintek.com.tw \
    --subject='Re: [PATCH v4 3/7] usb: serial: implement read IIR/MSR ep for F81232' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).