LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: "Pali Rohár" <pali.rohar@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Nishanth Menon <nm@ti.com>, Felipe Balbi <balbi@ti.com>,
	Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com>,
	Aaro Koskinen <aaro.koskinen@iki.fi>,
	Sebastian Reichel <sre@kernel.org>, Pavel Machek <pavel@ucw.cz>,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	linux-crypto@vger.kernel.org
Subject: Re: Nokia N900: omap aes is broken
Date: Wed, 18 Feb 2015 22:27:55 +0100	[thread overview]
Message-ID: <201502182227.55488@pali> (raw)
In-Reply-To: <201502182202.30272@pali>

[-- Attachment #1: Type: Text/Plain, Size: 2749 bytes --]

On Wednesday 18 February 2015 22:02:30 Pali Rohár wrote:
> On Wednesday 18 February 2015 13:21:03 Pali Rohár wrote:
> > Hello,
> > 
> > I tried to test OMAP AES driver on Nokia N900 with special
> > Nokia bootloader which enable L3 firewall for OMAP AES HW
> > support.
> > 
> > I modified arch/arm/boot/dts/omap34xx-hs.dtsi file and
> > commented aes line which disable aes support in DT.
> > 
> > Then I booted kernel and loaded omap-aes.ko module. And I
> > got this output in dmesg:
> > 
> > [    0.222930] platform 480c5000.aes: Cannot lookup hwmod
> > 'aes' [   27.758148] omap-aes 480c5000.aes:
> > _od_fail_runtime_resume: FIXME: missing hwmod/omap_dev info
> > [   27.765960] omap-aes 480c5000.aes: omap_aes_probe: failed
> > to get_sync(-19)
> > [   29.257690] omap-aes 480c5000.aes: initialization failed.
> > 
> > So it looks like some initialization data are missing for
> > Nokia N900 (omap3430 device).
> > 
> > Can somebody look at it? I have patched 2.6.28 kernel were
> > omap aes support on this N900 device (with special
> > bootloader) is working.
> > 
> > Maybe some other data are missing in DT or in hwmod?
> 
> dma channels are missing in DT. I applied this patch:
> 
> diff --git a/arch/arm/boot/dts/omap3.dtsi
> b/arch/arm/boot/dts/omap3.dtsi index 01b7111..473d460 100644
> --- a/arch/arm/boot/dts/omap3.dtsi
> +++ b/arch/arm/boot/dts/omap3.dtsi
> @@ -92,6 +92,8 @@
>  			ti,hwmods = "aes";
>  			reg = <0x480c5000 0x50>;
>  			interrupts = <0>;
> +			dmas = <&sdma 65 &sdma 66>;
> +			dma-names = "tx", "rx";
>  		};
> 
>  		prm: prm@48306000 {
> @@ -550,6 +552,8 @@
>  			ti,hwmods = "sham";
>  			reg = <0x480c3000 0x64>;
>  			interrupts = <49>;
> +			dmas = <&sdma 96>;
> +			dma-names = "rx";
>  		};
> 
>  		smartreflex_core: smartreflex@480cb000 {
> 
> 
> and omap-aes driver was successfully loaded. now it is in
> /proc/crypto
> 
> I copied dma names and numbers from file
> arch/arm/mach-omap2/omap_hwmod_3xxx_data.c

And I also needed to apply this patch:

diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
index 11468ee..3281f30 100644
--- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c
@@ -3938,8 +3938,9 @@ int __init omap3xxx_hwmod_init(void)
 	if (r < 0)
 		return r;
 
-	/* Register GP-only hwmod links. */
-	if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) {
+//	/* Register GP-only hwmod links. */
+//	if (h_gp && omap_type() == OMAP2_DEVICE_TYPE_GP) {
+	if (h_gp) {
 		r = omap_hwmod_register_links(h_gp);
 		if (r < 0)
 			return r;

aes hwmod is defined in GP-only hwmod...

-- 
Pali Rohár
pali.rohar@gmail.com

[-- Attachment #2: This is a digitally signed message part. --]
[-- Type: application/pgp-signature, Size: 198 bytes --]

  reply	other threads:[~2015-02-18 21:28 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-18 12:21 Pali Rohár
2015-02-18 21:02 ` Pali Rohár
2015-02-18 21:27   ` Pali Rohár [this message]
2015-02-24 17:25     ` Tony Lindgren
2015-02-24 17:38       ` Pali Rohár
2015-02-24 17:37         ` Tony Lindgren
2015-02-24 17:49           ` Pali Rohár
2015-02-24 17:50             ` Tony Lindgren
2015-02-25  9:50           ` Pavel Machek
2015-02-25 10:18             ` Pali Rohár

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=201502182227.55488@pali \
    --to=pali.rohar@gmail.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=balbi@ti.com \
    --cc=ivo.g.dimitrov.75@gmail.com \
    --cc=linux-crypto@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=nm@ti.com \
    --cc=pavel@ucw.cz \
    --cc=sre@kernel.org \
    --cc=tony@atomide.com \
    --subject='Re: Nokia N900: omap aes is broken' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).