LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: Olivier Sobrie <olivier@sobrie.be>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Wolfgang Grandegger <wg@grandegger.com>,
	Marc Kleine-Budde <mkl@pengutronix.de>,
	Andri Yngvason <andri.yngvason@marel.com>
Cc: Linux-CAN <linux-can@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH v3 2/3] can: kvaser_usb: Utilize all possible tx URBs
Date: Wed, 11 Mar 2015 13:39:02 -0400
Message-ID: <20150311173902.GB13095@linux> (raw)
In-Reply-To: <20150311173744.GA13095@linux>

From: Ahmed S. Darwish <ahmed.darwish@valeo.com>

The driver currently limits the number of outstanding, not yet
ACKed, transfers to 16 URBs. Meanwhile, the Kvaser firmware
provides its actual max supported number of outstanding
transmissions in its reply to the CMD_GET_SOFTWARE_INFO message.

One example is the UsbCan-II HS/LS device which reports support
of up to 48 tx URBs instead of just 16, increasing the driver
throughput by two-fold and reducing the possibility of -ENOBUFs.

Dynamically set the max tx URBs value according to firmware
replies.

Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
---
 drivers/net/can/usb/kvaser_usb.c | 55 +++++++++++++++++++++++++++-------------
 1 file changed, 37 insertions(+), 18 deletions(-)

changelog-v3: No changes

diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
index e97a08c..30b4d47 100644
--- a/drivers/net/can/usb/kvaser_usb.c
+++ b/drivers/net/can/usb/kvaser_usb.c
@@ -25,7 +25,6 @@
 #include <linux/can/dev.h>
 #include <linux/can/error.h>
 
-#define MAX_TX_URBS			16
 #define MAX_RX_URBS			4
 #define START_TIMEOUT			1000 /* msecs */
 #define STOP_TIMEOUT			1000 /* msecs */
@@ -456,8 +455,13 @@ struct kvaser_usb {
 	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
 	struct usb_anchor rx_submitted;
 
+	/* @max_tx_urbs: Firmware-reported maximum number of possible
+	 * outstanding transmissions on this specific Kvaser hardware. The
+	 * value is also used as a sentinel for marking free URB contexts.
+	 */
 	u32 fw_version;
 	unsigned int nchannels;
+	unsigned int max_tx_urbs;
 	enum kvaser_usb_family family;
 
 	bool rxinitdone;
@@ -470,7 +474,7 @@ struct kvaser_usb_net_priv {
 
 	spinlock_t tx_contexts_lock;
 	int active_tx_contexts;
-	struct kvaser_usb_tx_urb_context tx_contexts[MAX_TX_URBS];
+	struct kvaser_usb_tx_urb_context *tx_contexts;
 
 	struct usb_anchor tx_submitted;
 	struct completion start_comp, stop_comp;
@@ -657,9 +661,13 @@ static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
 	switch (dev->family) {
 	case KVASER_LEAF:
 		dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version);
+		dev->max_tx_urbs =
+			le16_to_cpu(msg.u.leaf.softinfo.max_outstanding_tx);
 		break;
 	case KVASER_USBCAN:
 		dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version);
+		dev->max_tx_urbs =
+			le16_to_cpu(msg.u.usbcan.softinfo.max_outstanding_tx);
 		break;
 	}
 
@@ -715,7 +723,7 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
 
 	stats = &priv->netdev->stats;
 
-	context = &priv->tx_contexts[tid % MAX_TX_URBS];
+	context = &priv->tx_contexts[tid % dev->max_tx_urbs];
 
 	/* Sometimes the state change doesn't come after a bus-off event */
 	if (priv->can.restart_ms &&
@@ -744,7 +752,7 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
 	spin_lock_irqsave(&priv->tx_contexts_lock, flags);
 
 	can_get_echo_skb(priv->netdev, context->echo_index);
-	context->echo_index = MAX_TX_URBS;
+	context->echo_index = dev->max_tx_urbs;
 	--priv->active_tx_contexts;
 	netif_wake_queue(priv->netdev);
 
@@ -1512,11 +1520,13 @@ error:
 
 static void kvaser_usb_reset_tx_urb_contexts(struct kvaser_usb_net_priv *priv)
 {
-	int i;
+	int i, max_tx_urbs;
+
+	max_tx_urbs = priv->dev->max_tx_urbs;
 
 	priv->active_tx_contexts = 0;
-	for (i = 0; i < MAX_TX_URBS; i++)
-		priv->tx_contexts[i].echo_index = MAX_TX_URBS;
+	for (i = 0; i < max_tx_urbs; i++)
+		priv->tx_contexts[i].echo_index = max_tx_urbs;
 }
 
 /* This method might sleep. Do not call it in the atomic context
@@ -1702,14 +1712,14 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 		*msg_tx_can_flags |= MSG_FLAG_REMOTE_FRAME;
 
 	spin_lock_irqsave(&priv->tx_contexts_lock, flags);
-	for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) {
-		if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
+	for (i = 0; i < dev->max_tx_urbs; i++) {
+		if (priv->tx_contexts[i].echo_index == dev->max_tx_urbs) {
 			context = &priv->tx_contexts[i];
 
 			context->echo_index = i;
 			can_put_echo_skb(skb, netdev, context->echo_index);
 			++priv->active_tx_contexts;
-			if (priv->active_tx_contexts >= MAX_TX_URBS)
+			if (priv->active_tx_contexts >= dev->max_tx_urbs)
 				netif_stop_queue(netdev);
 
 			break;
@@ -1743,7 +1753,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
 		spin_lock_irqsave(&priv->tx_contexts_lock, flags);
 
 		can_free_echo_skb(netdev, context->echo_index);
-		context->echo_index = MAX_TX_URBS;
+		context->echo_index = dev->max_tx_urbs;
 		--priv->active_tx_contexts;
 		netif_wake_queue(netdev);
 
@@ -1881,7 +1891,7 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 	if (err)
 		return err;
 
-	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
+	netdev = alloc_candev(sizeof(*priv), dev->max_tx_urbs);
 	if (!netdev) {
 		dev_err(&intf->dev, "Cannot alloc candev\n");
 		return -ENOMEM;
@@ -1889,6 +1899,13 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 
 	priv = netdev_priv(netdev);
 
+	priv->tx_contexts = kzalloc(dev->max_tx_urbs *
+				    sizeof(*priv->tx_contexts), GFP_KERNEL);
+	if (!priv->tx_contexts) {
+		free_candev(netdev);
+		return -ENOMEM;
+	}
+
 	init_usb_anchor(&priv->tx_submitted);
 	init_completion(&priv->start_comp);
 	init_completion(&priv->stop_comp);
@@ -1928,7 +1945,7 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
 		return err;
 	}
 
-	netdev_dbg(netdev, "device registered\n");
+	netdev_info(netdev, "device registered\n");
 
 	return 0;
 }
@@ -2009,6 +2026,13 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 		return err;
 	}
 
+	dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n",
+		((dev->fw_version >> 24) & 0xff),
+		((dev->fw_version >> 16) & 0xff),
+		(dev->fw_version & 0xffff));
+
+	dev_dbg(&intf->dev, "Max oustanding tx = %d URBs\n", dev->max_tx_urbs);
+
 	err = kvaser_usb_get_card_info(dev);
 	if (err) {
 		dev_err(&intf->dev,
@@ -2016,11 +2040,6 @@ static int kvaser_usb_probe(struct usb_interface *intf,
 		return err;
 	}
 
-	dev_dbg(&intf->dev, "Firmware version: %d.%d.%d\n",
-		((dev->fw_version >> 24) & 0xff),
-		((dev->fw_version >> 16) & 0xff),
-		(dev->fw_version & 0xffff));
-
 	for (i = 0; i < dev->nchannels; i++) {
 		err = kvaser_usb_init_one(intf, id, i);
 		if (err) {
-- 
1.9.1


  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26 15:20 [PATCH 1/5] can: kvaser_usb: Avoid double free on URB submission failures Ahmed S. Darwish
2015-02-26 15:22 ` [PATCH 2/5] can: kvaser_usb: Read all messages in a bulk-in URB buffer Ahmed S. Darwish
2015-02-26 15:24   ` [PATCH 3/5] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-02-26 15:25     ` [PATCH 4/5] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-02-26 15:29       ` [PATCH 5/5] can: kvaser_usb: Fix tx queue start/stop race conditions Ahmed S. Darwish
2015-03-14 14:26   ` [PATCH 2/5] can: kvaser_usb: Read all messages in a bulk-in URB buffer Marc Kleine-Budde
2015-03-04  9:15 ` [PATCH 1/5] can: kvaser_usb: Avoid double free on URB submission failures Marc Kleine-Budde
2015-03-09 12:32   ` Ahmed S. Darwish
2015-03-09 12:56     ` Marc Kleine-Budde
2015-03-11 15:23 ` [PATCH v2 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Ahmed S. Darwish
2015-03-11 15:28   ` [PATCH v2 2/3] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-03-11 15:30     ` [PATCH v2 3/3] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-03-11 15:36   ` [PATCH v2 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Marc Kleine-Budde
2015-03-11 15:57     ` Ahmed S. Darwish
2015-03-11 17:37 ` [PATCH v3 " Ahmed S. Darwish
2015-03-11 17:39   ` Ahmed S. Darwish [this message]
2015-03-11 17:39     ` [PATCH v3 3/3] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-03-11 21:53     ` [PATCH v3 2/3] can: kvaser_usb: Utilize all possible tx URBs Marc Kleine-Budde
2015-03-12 10:52       ` Ahmed S. Darwish
2015-03-12 11:29         ` Marc Kleine-Budde
2015-03-11 21:43   ` [PATCH v3 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Marc Kleine-Budde
2015-03-12 19:30     ` Ahmed S. Darwish
2015-03-14 13:02 ` [PATCH v4 " Ahmed S. Darwish
2015-03-14 13:09   ` [PATCH v4 2/3] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-03-14 13:11     ` [PATCH v4 3/3] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-03-14 15:26       ` Marc Kleine-Budde
2015-03-14 15:41         ` Ahmed S. Darwish
2015-03-14 15:55           ` Marc Kleine-Budde
2015-03-14 16:06             ` Ahmed S. Darwish
2015-03-14 13:41   ` [PATCH v4 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Marc Kleine-Budde
2015-03-14 14:38     ` Ahmed S. Darwish
2015-03-14 14:58       ` Marc Kleine-Budde
2015-03-14 15:19         ` Ahmed S. Darwish
2015-03-15 15:03 ` [PATCH v5 1/2] can: kvaser_usb: Comply with firmware max tx URBs value Ahmed S. Darwish
2015-03-15 15:10   ` [PATCH v5 2/2] can: kvaser_usb: Fix sparse warning __le16 degrades to integer Ahmed S. Darwish
2015-03-15 18:08   ` [PATCH v5 1/2] can: kvaser_usb: Comply with firmware max tx URBs value Marc Kleine-Budde
2015-03-16 12:16     ` Ahmed S. Darwish
2015-03-16 12:56       ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150311173902.GB13095@linux \
    --to=darwish.07@gmail.com \
    --cc=andri.yngvason@marel.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=olivier@sobrie.be \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git