LKML Archive on lore.kernel.org
 help / color / Atom feed
From: "Ahmed S. Darwish" <darwish.07@gmail.com>
To: Marc Kleine-Budde <mkl@pengutronix.de>
Cc: Olivier Sobrie <olivier@sobrie.be>,
	Oliver Hartkopp <socketcan@hartkopp.net>,
	Wolfgang Grandegger <wg@grandegger.com>,
	Andri Yngvason <andri.yngvason@marel.com>,
	Linux-CAN <linux-can@vger.kernel.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v3 2/3] can: kvaser_usb: Utilize all possible tx URBs
Date: Thu, 12 Mar 2015 06:52:11 -0400
Message-ID: <20150312105211.GA21639@linux> (raw)
In-Reply-To: <5500B958.2020101@pengutronix.de>

On Wed, Mar 11, 2015 at 10:53:28PM +0100, Marc Kleine-Budde wrote:
> On 03/11/2015 06:39 PM, Ahmed S. Darwish wrote:
> > From: Ahmed S. Darwish <ahmed.darwish@valeo.com>
> > 
> > The driver currently limits the number of outstanding, not yet
> > ACKed, transfers to 16 URBs. Meanwhile, the Kvaser firmware
> > provides its actual max supported number of outstanding
> > transmissions in its reply to the CMD_GET_SOFTWARE_INFO message.
> > 
> > One example is the UsbCan-II HS/LS device which reports support
> > of up to 48 tx URBs instead of just 16, increasing the driver
> > throughput by two-fold and reducing the possibility of -ENOBUFs.
> > 
> > Dynamically set the max tx URBs value according to firmware
> > replies.
> > 
> > Signed-off-by: Ahmed S. Darwish <ahmed.darwish@valeo.com>
> > ---
> >  drivers/net/can/usb/kvaser_usb.c | 55 +++++++++++++++++++++++++++-------------
> >  1 file changed, 37 insertions(+), 18 deletions(-)
> > 
> > changelog-v3: No changes
> > 
> > diff --git a/drivers/net/can/usb/kvaser_usb.c b/drivers/net/can/usb/kvaser_usb.c
> > index e97a08c..30b4d47 100644
> > --- a/drivers/net/can/usb/kvaser_usb.c
> > +++ b/drivers/net/can/usb/kvaser_usb.c
> > @@ -25,7 +25,6 @@
> >  #include <linux/can/dev.h>
> >  #include <linux/can/error.h>
> >  
> > -#define MAX_TX_URBS			16
> >  #define MAX_RX_URBS			4
> >  #define START_TIMEOUT			1000 /* msecs */
> >  #define STOP_TIMEOUT			1000 /* msecs */
> > @@ -456,8 +455,13 @@ struct kvaser_usb {
> >  	struct usb_endpoint_descriptor *bulk_in, *bulk_out;
> >  	struct usb_anchor rx_submitted;
> >  
> > +	/* @max_tx_urbs: Firmware-reported maximum number of possible
> > +	 * outstanding transmissions on this specific Kvaser hardware. The
> > +	 * value is also used as a sentinel for marking free URB contexts.
> > +	 */
> >  	u32 fw_version;
> >  	unsigned int nchannels;
> > +	unsigned int max_tx_urbs;
> >  	enum kvaser_usb_family family;
> >  
> >  	bool rxinitdone;
> > @@ -470,7 +474,7 @@ struct kvaser_usb_net_priv {
> >  
> >  	spinlock_t tx_contexts_lock;
> >  	int active_tx_contexts;
> > -	struct kvaser_usb_tx_urb_context tx_contexts[MAX_TX_URBS];
> > +	struct kvaser_usb_tx_urb_context *tx_contexts;
> >  
> >  	struct usb_anchor tx_submitted;
> >  	struct completion start_comp, stop_comp;
> > @@ -657,9 +661,13 @@ static int kvaser_usb_get_software_info(struct kvaser_usb *dev)
> >  	switch (dev->family) {
> >  	case KVASER_LEAF:
> >  		dev->fw_version = le32_to_cpu(msg.u.leaf.softinfo.fw_version);
> > +		dev->max_tx_urbs =
> > +			le16_to_cpu(msg.u.leaf.softinfo.max_outstanding_tx);
> >  		break;
> >  	case KVASER_USBCAN:
> >  		dev->fw_version = le32_to_cpu(msg.u.usbcan.softinfo.fw_version);
> > +		dev->max_tx_urbs =
> > +			le16_to_cpu(msg.u.usbcan.softinfo.max_outstanding_tx);
> >  		break;
> >  	}
> >  
> > @@ -715,7 +723,7 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
> >  
> >  	stats = &priv->netdev->stats;
> >  
> > -	context = &priv->tx_contexts[tid % MAX_TX_URBS];
> > +	context = &priv->tx_contexts[tid % dev->max_tx_urbs];
> >  
> >  	/* Sometimes the state change doesn't come after a bus-off event */
> >  	if (priv->can.restart_ms &&
> > @@ -744,7 +752,7 @@ static void kvaser_usb_tx_acknowledge(const struct kvaser_usb *dev,
> >  	spin_lock_irqsave(&priv->tx_contexts_lock, flags);
> >  
> >  	can_get_echo_skb(priv->netdev, context->echo_index);
> > -	context->echo_index = MAX_TX_URBS;
> > +	context->echo_index = dev->max_tx_urbs;
> >  	--priv->active_tx_contexts;
> >  	netif_wake_queue(priv->netdev);
> >  
> > @@ -1512,11 +1520,13 @@ error:
> >  
> >  static void kvaser_usb_reset_tx_urb_contexts(struct kvaser_usb_net_priv *priv)
> >  {
> > -	int i;
> > +	int i, max_tx_urbs;
> > +
> > +	max_tx_urbs = priv->dev->max_tx_urbs;
> >  
> >  	priv->active_tx_contexts = 0;
> > -	for (i = 0; i < MAX_TX_URBS; i++)
> > -		priv->tx_contexts[i].echo_index = MAX_TX_URBS;
> > +	for (i = 0; i < max_tx_urbs; i++)
> > +		priv->tx_contexts[i].echo_index = max_tx_urbs;
> >  }
> >  
> >  /* This method might sleep. Do not call it in the atomic context
> > @@ -1702,14 +1712,14 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> >  		*msg_tx_can_flags |= MSG_FLAG_REMOTE_FRAME;
> >  
> >  	spin_lock_irqsave(&priv->tx_contexts_lock, flags);
> > -	for (i = 0; i < ARRAY_SIZE(priv->tx_contexts); i++) {
> > -		if (priv->tx_contexts[i].echo_index == MAX_TX_URBS) {
> > +	for (i = 0; i < dev->max_tx_urbs; i++) {
> > +		if (priv->tx_contexts[i].echo_index == dev->max_tx_urbs) {
> >  			context = &priv->tx_contexts[i];
> >  
> >  			context->echo_index = i;
> >  			can_put_echo_skb(skb, netdev, context->echo_index);
> >  			++priv->active_tx_contexts;
> > -			if (priv->active_tx_contexts >= MAX_TX_URBS)
> > +			if (priv->active_tx_contexts >= dev->max_tx_urbs)
> >  				netif_stop_queue(netdev);
> >  
> >  			break;
> > @@ -1743,7 +1753,7 @@ static netdev_tx_t kvaser_usb_start_xmit(struct sk_buff *skb,
> >  		spin_lock_irqsave(&priv->tx_contexts_lock, flags);
> >  
> >  		can_free_echo_skb(netdev, context->echo_index);
> > -		context->echo_index = MAX_TX_URBS;
> > +		context->echo_index = dev->max_tx_urbs;
> >  		--priv->active_tx_contexts;
> >  		netif_wake_queue(netdev);
> >  
> > @@ -1881,7 +1891,7 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
> >  	if (err)
> >  		return err;
> >  
> > -	netdev = alloc_candev(sizeof(*priv), MAX_TX_URBS);
> > +	netdev = alloc_candev(sizeof(*priv), dev->max_tx_urbs);
> >  	if (!netdev) {
> >  		dev_err(&intf->dev, "Cannot alloc candev\n");
> >  		return -ENOMEM;
> > @@ -1889,6 +1899,13 @@ static int kvaser_usb_init_one(struct usb_interface *intf,
> >  
> >  	priv = netdev_priv(netdev);
> >  
> > +	priv->tx_contexts = kzalloc(dev->max_tx_urbs *
> > +				    sizeof(*priv->tx_contexts), GFP_KERNEL);
> > +	if (!priv->tx_contexts) {
> > +		free_candev(netdev);
> > +		return -ENOMEM;
> > +	}
> 
> I'm missing a free for the priv->tx_contexts. I see two options:
> 

Correct. Should not have missed that.

> 1) use devm_kzalloc(), or
> 2) move struct kvaser_usb_tx_urb_context tx_contexts[]; to the end of
>    struct kvaser_usb_net_priv, see [1] for an example.
> 
>    Without further testing, I think the correct alloc for that case
>    would be:
>        alloc_candev(sizeof(*priv + dev->max_tx_urbs *
>                sizeof(struct kvaser_usb_tx_urb_context))
> 

The first option looks better I guess. I'll have to check though
if the resource handling done by devm_kmalloc() will work even
if the probe() method fails with -ENODEV and the like...

> Marc
> 
> [1] http://stackoverflow.com/questions/2060974/dynamic-array-in-struct-c
> 

Thanks for the link. Didn't know that such a "hack" has gained
official status by C99 :-)

Regards,
Darwish

  reply index

Thread overview: 38+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26 15:20 [PATCH 1/5] can: kvaser_usb: Avoid double free on URB submission failures Ahmed S. Darwish
2015-02-26 15:22 ` [PATCH 2/5] can: kvaser_usb: Read all messages in a bulk-in URB buffer Ahmed S. Darwish
2015-02-26 15:24   ` [PATCH 3/5] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-02-26 15:25     ` [PATCH 4/5] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-02-26 15:29       ` [PATCH 5/5] can: kvaser_usb: Fix tx queue start/stop race conditions Ahmed S. Darwish
2015-03-14 14:26   ` [PATCH 2/5] can: kvaser_usb: Read all messages in a bulk-in URB buffer Marc Kleine-Budde
2015-03-04  9:15 ` [PATCH 1/5] can: kvaser_usb: Avoid double free on URB submission failures Marc Kleine-Budde
2015-03-09 12:32   ` Ahmed S. Darwish
2015-03-09 12:56     ` Marc Kleine-Budde
2015-03-11 15:23 ` [PATCH v2 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Ahmed S. Darwish
2015-03-11 15:28   ` [PATCH v2 2/3] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-03-11 15:30     ` [PATCH v2 3/3] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-03-11 15:36   ` [PATCH v2 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Marc Kleine-Budde
2015-03-11 15:57     ` Ahmed S. Darwish
2015-03-11 17:37 ` [PATCH v3 " Ahmed S. Darwish
2015-03-11 17:39   ` [PATCH v3 2/3] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-03-11 17:39     ` [PATCH v3 3/3] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-03-11 21:53     ` [PATCH v3 2/3] can: kvaser_usb: Utilize all possible tx URBs Marc Kleine-Budde
2015-03-12 10:52       ` Ahmed S. Darwish [this message]
2015-03-12 11:29         ` Marc Kleine-Budde
2015-03-11 21:43   ` [PATCH v3 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Marc Kleine-Budde
2015-03-12 19:30     ` Ahmed S. Darwish
2015-03-14 13:02 ` [PATCH v4 " Ahmed S. Darwish
2015-03-14 13:09   ` [PATCH v4 2/3] can: kvaser_usb: Utilize all possible tx URBs Ahmed S. Darwish
2015-03-14 13:11     ` [PATCH v4 3/3] can: kvaser_usb: Use can-dev unregistration mechanism Ahmed S. Darwish
2015-03-14 15:26       ` Marc Kleine-Budde
2015-03-14 15:41         ` Ahmed S. Darwish
2015-03-14 15:55           ` Marc Kleine-Budde
2015-03-14 16:06             ` Ahmed S. Darwish
2015-03-14 13:41   ` [PATCH v4 1/3] can: kvaser_usb: Fix tx queue start/stop race conditions Marc Kleine-Budde
2015-03-14 14:38     ` Ahmed S. Darwish
2015-03-14 14:58       ` Marc Kleine-Budde
2015-03-14 15:19         ` Ahmed S. Darwish
2015-03-15 15:03 ` [PATCH v5 1/2] can: kvaser_usb: Comply with firmware max tx URBs value Ahmed S. Darwish
2015-03-15 15:10   ` [PATCH v5 2/2] can: kvaser_usb: Fix sparse warning __le16 degrades to integer Ahmed S. Darwish
2015-03-15 18:08   ` [PATCH v5 1/2] can: kvaser_usb: Comply with firmware max tx URBs value Marc Kleine-Budde
2015-03-16 12:16     ` Ahmed S. Darwish
2015-03-16 12:56       ` Marc Kleine-Budde

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150312105211.GA21639@linux \
    --to=darwish.07@gmail.com \
    --cc=andri.yngvason@marel.com \
    --cc=linux-can@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mkl@pengutronix.de \
    --cc=olivier@sobrie.be \
    --cc=socketcan@hartkopp.net \
    --cc=wg@grandegger.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

LKML Archive on lore.kernel.org

Archives are clonable:
	git clone --mirror https://lkml.kernel.org/lkml/0 lkml/git/0.git
	git clone --mirror https://lkml.kernel.org/lkml/1 lkml/git/1.git
	git clone --mirror https://lkml.kernel.org/lkml/2 lkml/git/2.git
	git clone --mirror https://lkml.kernel.org/lkml/3 lkml/git/3.git
	git clone --mirror https://lkml.kernel.org/lkml/4 lkml/git/4.git
	git clone --mirror https://lkml.kernel.org/lkml/5 lkml/git/5.git
	git clone --mirror https://lkml.kernel.org/lkml/6 lkml/git/6.git
	git clone --mirror https://lkml.kernel.org/lkml/7 lkml/git/7.git
	git clone --mirror https://lkml.kernel.org/lkml/8 lkml/git/8.git
	git clone --mirror https://lkml.kernel.org/lkml/9 lkml/git/9.git
	git clone --mirror https://lkml.kernel.org/lkml/10 lkml/git/10.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 lkml lkml/ https://lkml.kernel.org/lkml \
		linux-kernel@vger.kernel.org
	public-inbox-index lkml

Example config snippet for mirrors

Newsgroup available over NNTP:
	nntp://nntp.lore.kernel.org/org.kernel.vger.linux-kernel


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git