LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Lee Jones <lee.jones@linaro.org>
To: Kishon Vijay Abraham I <kishon@ti.com>
Cc: Peter Griffin <peter.griffin@linaro.org>,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, srinivas.kandagatla@gmail.com,
	maxime.coquelin@st.com, patrice.chotard@st.com, balbi@ti.com,
	devicetree@vger.kernel.org, robherring2@gmail.com
Subject: Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h
Date: Tue, 31 Mar 2015 08:40:27 +0100	[thread overview]
Message-ID: <20150331074027.GH9447@x1> (raw)
In-Reply-To: <551A2D4D.1010601@ti.com>

On Tue, 31 Mar 2015, Kishon Vijay Abraham I wrote:

> Hi Patrice, Maxime,
> 
> On Monday 30 March 2015 08:47 PM, Peter Griffin wrote:
> >Now there are generic phy type constants declared in phy.h, migrate over to
> >using them rather than defining our own. This change has been done as one
> >atomic commit to be bisectable.
> >
> >Note: The values of the defines are the same, so there is no ABI breakage
> >with this patch.
> >
> >Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
> >Acked-by: Rob Herring <robh@kernel.org>
> >Acked-by: Lee Jones <lee.jones@linaro.org>
> 
> Are you okay for this patch to go via PHY tree? It modifies arch/arm/boot/dts
> /stih416.dtsi.

These files need to be changed simultaneously in order to prevent
breakage during bisection and the like.  I think the best bet moving
forward is to pull this into its own branch, tag it and send Maxime a
pull-request to the immutable branch.  It's the best way to minimise
merge conflicts during the v4.1 merge window.

> >---
> >  Documentation/devicetree/bindings/phy/phy-miphy365x.txt |  8 ++++----
> >  arch/arm/boot/dts/stih416.dtsi                          |  4 ++--
> >  drivers/phy/phy-miphy365x.c                             | 14 +++++++-------
> >  include/dt-bindings/phy/phy-miphy365x.h                 | 14 --------------
> >  4 files changed, 13 insertions(+), 27 deletions(-)
> >  delete mode 100644 include/dt-bindings/phy/phy-miphy365x.h
> >
> >diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> >index 9802d5d..8772900 100644
> >--- a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> >+++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt
> >@@ -20,8 +20,8 @@ Required nodes	:  A sub-node is required for each channel the controller
> >  Required properties (port (child) node):
> >  - #phy-cells 	: Should be 1 (See second example)
> >  		  Cell after port phandle is device type from:
> >-			- MIPHY_TYPE_SATA
> >-			- MIPHY_TYPE_PCI
> >+			- PHY_TYPE_SATA
> >+			- PHY_TYPE_PCI
> >  - reg        	: Address and length of register sets for each device in
> >  		  "reg-names"
> >  - reg-names     : The names of the register addresses corresponding to the
> >@@ -68,10 +68,10 @@ property, containing a phandle to the phy port node and a device type.
> >
> >  Example:
> >
> >-#include <dt-bindings/phy/phy-miphy365x.h>
> >+#include <dt-bindings/phy/phy.h>
> >
> >  	sata0: sata@fe380000 {
> >  		...
> >-		phys	  = <&phy_port0 MIPHY_TYPE_SATA>;
> >+		phys	  = <&phy_port0 PHY_TYPE_SATA>;
> >  		...
> >  	};
> >diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi
> >index ea28eba..eeb7afe 100644
> >--- a/arch/arm/boot/dts/stih416.dtsi
> >+++ b/arch/arm/boot/dts/stih416.dtsi
> >@@ -10,7 +10,7 @@
> >  #include "stih416-clock.dtsi"
> >  #include "stih416-pinctrl.dtsi"
> >
> >-#include <dt-bindings/phy/phy-miphy365x.h>
> >+#include <dt-bindings/phy/phy.h>
> >  #include <dt-bindings/interrupt-controller/arm-gic.h>
> >  #include <dt-bindings/reset-controller/stih416-resets.h>
> >  / {
> >@@ -306,7 +306,7 @@
> >  			reg             = <0xfe380000 0x1000>;
> >  			interrupts      = <GIC_SPI 157 IRQ_TYPE_NONE>;
> >  			interrupt-names = "hostc";
> >-			phys	        = <&phy_port0 MIPHY_TYPE_SATA>;
> >+			phys	        = <&phy_port0 PHY_TYPE_SATA>;
> >  			phy-names       = "sata-phy";
> >  			resets	        = <&powerdown STIH416_SATA0_POWERDOWN>,
> >  					  <&softreset STIH416_SATA0_SOFTRESET>;
> >diff --git a/drivers/phy/phy-miphy365x.c b/drivers/phy/phy-miphy365x.c
> >index 51b459d..019c2d7 100644
> >--- a/drivers/phy/phy-miphy365x.c
> >+++ b/drivers/phy/phy-miphy365x.c
> >@@ -25,7 +25,7 @@
> >  #include <linux/mfd/syscon.h>
> >  #include <linux/regmap.h>
> >
> >-#include <dt-bindings/phy/phy-miphy365x.h>
> >+#include <dt-bindings/phy/phy.h>
> >
> >  #define HFC_TIMEOUT		100
> >
> >@@ -177,7 +177,7 @@ static u8 rx_tx_spd[] = {
> >  static int miphy365x_set_path(struct miphy365x_phy *miphy_phy,
> >  			      struct miphy365x_dev *miphy_dev)
> >  {
> >-	bool sata = (miphy_phy->type == MIPHY_TYPE_SATA);
> >+	bool sata = (miphy_phy->type == PHY_TYPE_SATA);
> >
> >  	return regmap_update_bits(miphy_dev->regmap,
> >  				  miphy_phy->ctrlreg,
> >@@ -431,7 +431,7 @@ static int miphy365x_init(struct phy *phy)
> >  	}
> >
> >  	/* Initialise Miphy for PCIe or SATA */
> >-	if (miphy_phy->type == MIPHY_TYPE_PCIE)
> >+	if (miphy_phy->type == PHY_TYPE_PCIE)
> >  		ret = miphy365x_init_pcie_port(miphy_phy, miphy_dev);
> >  	else
> >  		ret = miphy365x_init_sata_port(miphy_phy, miphy_dev);
> >@@ -455,8 +455,8 @@ int miphy365x_get_addr(struct device *dev, struct miphy365x_phy *miphy_phy,
> >  		return ret;
> >  	}
> >
> >-	if (!((!strncmp(name, "sata", 4) && type == MIPHY_TYPE_SATA) ||
> >-	      (!strncmp(name, "pcie", 4) && type == MIPHY_TYPE_PCIE)))
> >+	if (!((!strncmp(name, "sata", 4) && type == PHY_TYPE_SATA) ||
> >+	      (!strncmp(name, "pcie", 4) && type == PHY_TYPE_PCIE)))
> >  		return 0;
> >
> >  	miphy_phy->base = of_iomap(phynode, index);
> >@@ -499,8 +499,8 @@ static struct phy *miphy365x_xlate(struct device *dev,
> >
> >  	miphy_phy->type = args->args[0];
> >
> >-	if (!(miphy_phy->type == MIPHY_TYPE_SATA ||
> >-	      miphy_phy->type == MIPHY_TYPE_PCIE)) {
> >+	if (!(miphy_phy->type == PHY_TYPE_SATA ||
> >+	      miphy_phy->type == PHY_TYPE_PCIE)) {
> >  		dev_err(dev, "Unsupported device type: %d\n", miphy_phy->type);
> >  		return ERR_PTR(-EINVAL);
> >  	}
> >diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
> >deleted file mode 100644
> >index 8ef8aba..0000000
> >--- a/include/dt-bindings/phy/phy-miphy365x.h
> >+++ /dev/null
> >@@ -1,14 +0,0 @@
> >-/*
> >- * This header provides constants for the phy framework
> >- * based on the STMicroelectronics MiPHY365x.
> >- *
> >- * Author: Lee Jones <lee.jones@linaro.org>
> >- */
> >-#ifndef _DT_BINDINGS_PHY_MIPHY
> >-#define _DT_BINDINGS_PHY_MIPHY
> >-
> >-#define MIPHY_TYPE_SATA		1
> >-#define MIPHY_TYPE_PCIE		2
> >-#define MIPHY_TYPE_USB		3
> >-
> >-#endif /* _DT_BINDINGS_PHY_MIPHY */
> >

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog

  reply	other threads:[~2015-03-31  7:40 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-30 15:17 [PATCH v2 0/6] Add dwc3 usb3 DT node and various phy cleanup Peter Griffin
2015-03-30 15:17 ` [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h Peter Griffin
2015-03-31  5:14   ` Kishon Vijay Abraham I
2015-03-31  7:40     ` Lee Jones [this message]
2015-03-31  8:01       ` Peter Griffin
2015-03-31  8:47         ` Lee Jones
2015-03-31 15:30       ` Kishon Vijay Abraham I
2015-03-31 15:55         ` Maxime Coquelin
2015-04-01  7:15           ` Lee Jones
2015-04-01  8:01             ` Kishon Vijay Abraham I
2015-04-01 11:42               ` Lee Jones
2015-03-30 15:17 ` [PATCH v2 2/6] ahci: st: Update the DT example for how to obtain the PHY Peter Griffin
2015-03-30 15:17 ` [PATCH v2 3/6] ARM: DT: STi: STiH407: Update picophyreset for the usb3 controllers usb2 phy Peter Griffin
2015-03-30 15:17 ` [PATCH v2 4/6] ARM: DT: STi: STiH407: Add dwc3 usb3 DT node Peter Griffin
2015-03-30 15:17 ` [PATCH v2 5/6] usb: dwc3: dwc3-st: Update the incorrect DT dwc3 example Peter Griffin
2015-03-30 15:17 ` [PATCH v2 6/6] MAINTAINERS: Add phy-miphy28lp.c to ARCH/STI architecture Peter Griffin
2015-03-31 16:15   ` Kishon Vijay Abraham I
2015-03-31 17:40     ` Peter Griffin
2015-04-01  5:57       ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20150331074027.GH9447@x1 \
    --to=lee.jones@linaro.org \
    --cc=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kishon@ti.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maxime.coquelin@st.com \
    --cc=patrice.chotard@st.com \
    --cc=peter.griffin@linaro.org \
    --cc=robherring2@gmail.com \
    --cc=srinivas.kandagatla@gmail.com \
    --subject='Re: [PATCH v2 1/6] phy: miphy365x: Use the generic phy type constants in dt-bindings/phy/phy.h' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).