LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-rtc@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [GIT PULL] RTC for 4.15
Date: Tue, 21 Nov 2017 16:28:23 +0100 [thread overview]
Message-ID: <20171121152823.payahwcvnnjervgf@piout.net> (raw)
[-- Attachment #1: Type: text/plain, Size: 7008 bytes --]
Hi Linus,
Here is the pull-request for the RTC subsystem for 4.14.
The last minute change is only a documentation update to avoid further
bug reports. (And also a small commit message reword).
There is nothing scary this cycle, mostly driver fixes and updates. The
core fix has been in for a while and has been tested on multiple kernel
revisions by multiple teams.
The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e:
Linux 4.14-rc1 (2017-09-16 15:47:51 -0700)
are available in the Git repository at:
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux.git tags/rtc-4.15
for you to fetch changes up to 87c9fd81825363237ac5560822e2261535800597:
dt-bindings: rtc: imxdi: Improve the bindings text (2017-11-20 22:48:20 +0100)
----------------------------------------------------------------
RTC for 4.15
Subsystem:
- Fix setting the alarm to the next expiring timer
New driver:
- Mediatek MT7622 RTC
- NXP PCF85363
- Spreadtrum SC27xx PMIC RTC
Drivers:
- Use generic nvmem to expose the Non volatile ram for ds1305, ds1511,
m48t86 and omap
- abx80x: solve possible race condition at probe
- armada38x: support trimming the RTC oscillator
- at91rm9200: fix reading the alarm value at boot
- ds1511: allow waking platform
- m41t80: rework square wave output
- pcf8523: support trimming the RTC oscillator
- pcf8563: fix clock output rate
- pl031: make interrupt optional
- xgene: fix suspend/resume
----------------------------------------------------------------
Akshay Bhat (3):
rtc: rx8010: Remove duplicate define
rtc: rx8010: Specify correct address for RX8010_RESV31
rtc: rx8010: Fix for incorrect return value
Alexandre Belloni (18):
rtc: rv3029: fix vendor string
rtc: set the alarm to the next expiring timer
rtc: ds1305: switch to rtc_register_device
rtc: ds1305: use generic nvmem
rtc: m48t86: switch to rtc_register_device
rtc: m48t86: use generic nvmem
rtc: abx80x: switch to rtc_register_device
rtc: abx80x: solve race condition
rtc: ds1511: switch to rtc_register_device
rtc: ds1511: allow waking platform
rtc: ds1511: use generic nvmem
rtc: ds1390: Add OF device ID table
rtc: omap: fix error path when pinctrl_register fails
rtc: omap: switch to rtc_register_device
rtc: omap: Support scratch registers
rtc: pcf8563: don't alway enable the alarm
rtc: at91rm9200: stop calculating yday in at91_rtc_readalarm
rtc: at91rm9200: fix reading alarm value
Arnd Bergmann (1):
rtc: xgene: mark PM functions as __maybe_unused
Baolin Wang (3):
rtc: sysfs: Use time64_t variables to set time/alarm
dt-bindings: rtc: Add Spreadtrum SC27xx RTC documentation
rtc: sc27xx: Add Spreadtrum SC27xx PMIC RTC driver
Bastian Stender (1):
rtc: ds1307: add OF and ACPI entries for Epson RX8130
Dan Carpenter (1):
rtc: rv3029: Clean up error handling in rv3029_eeprom_write()
Eric Nelson (1):
rtc: add support for NXP PCF85363 real-time clock
Fabio Estevam (1):
dt-bindings: rtc: imxdi: Improve the bindings text
Heiner Kallweit (1):
rtc: ds1307: improve weekday handling
Loc Ho (1):
rtc: xgene: Fix suspend/resume
Mathieu Malaterre (2):
rtc: jz4740: remove duplicate 'write' in message
rtc: jz4740: fix loading of rtc driver
Philipp Zabel (1):
rtc: pcf8563: fix output clock rate
Russell King (7):
rtc: pl031: constify amba_ids
rtc: pl031: use devm_* for allocating memory and mapping resource
rtc: pl031: avoid exposing alarm if no interrupt
rtc: pl031: make interrupt optional
rtc: clarify the RTC offset correction
rtc: armada38x: add support for trimming the RTC
rtc: pcf8523: add support for trimming the RTC oscillator
Sean Wang (4):
dt-bindings: rtc: mediatek: add bindings for MediaTek SoC based RTC
rtc: mediatek: add driver for RTC on MT7622 SoC
rtc: mediatek: enhance the description for MediaTek PMIC based RTC
rtc: mediatek: update MAINTAINERS entry with MediaTek RTC driver
Troy Kisky (5):
rtc: m41t80: m41t80_sqw_set_rate should return 0 on success
rtc: m41t80: fix m41t80_sqw_round_rate return value
rtc: m41t80: avoid i2c read in m41t80_sqw_recalc_rate
rtc: m41t80: avoid i2c read in m41t80_sqw_is_prepared
rtc: m41t80: remove unneeded checks from m41t80_sqw_set_rate
.../devicetree/bindings/rtc/imxdi-rtc.txt | 14 +-
Documentation/devicetree/bindings/rtc/pcf85363.txt | 17 +
.../devicetree/bindings/rtc/rtc-mt7622.txt | 21 +
.../devicetree/bindings/rtc/sprd,sc27xx-rtc.txt | 27 +
.../devicetree/bindings/trivial-devices.txt | 2 +-
MAINTAINERS | 3 +
drivers/rtc/Kconfig | 42 +-
drivers/rtc/Makefile | 3 +
drivers/rtc/interface.c | 6 +-
drivers/rtc/rtc-abx80x.c | 12 +-
drivers/rtc/rtc-armada38x.c | 101 ++++
drivers/rtc/rtc-at91rm9200.c | 19 +-
drivers/rtc/rtc-ds1305.c | 70 +--
drivers/rtc/rtc-ds1307.c | 57 +-
drivers/rtc/rtc-ds1390.c | 7 +
drivers/rtc/rtc-ds1511.c | 75 +--
drivers/rtc/rtc-jz4740.c | 6 +-
drivers/rtc/rtc-m41t80.c | 84 ++-
drivers/rtc/rtc-m48t86.c | 58 +-
drivers/rtc/rtc-mt7622.c | 422 +++++++++++++
drivers/rtc/rtc-omap.c | 57 +-
drivers/rtc/rtc-pcf8523.c | 40 ++
drivers/rtc/rtc-pcf85363.c | 220 +++++++
drivers/rtc/rtc-pcf8563.c | 4 +-
drivers/rtc/rtc-pl031.c | 48 +-
drivers/rtc/rtc-rv3029c2.c | 18 +-
drivers/rtc/rtc-rx8010.c | 7 +-
drivers/rtc/rtc-sc27xx.c | 662 +++++++++++++++++++++
drivers/rtc/rtc-sysfs.c | 25 +-
drivers/rtc/rtc-xgene.c | 47 +-
30 files changed, 1891 insertions(+), 283 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/pcf85363.txt
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mt7622.txt
create mode 100644 Documentation/devicetree/bindings/rtc/sprd,sc27xx-rtc.txt
create mode 100644 drivers/rtc/rtc-mt7622.c
create mode 100644 drivers/rtc/rtc-pcf85363.c
create mode 100644 drivers/rtc/rtc-sc27xx.c
--
Alexandre Belloni, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]
next reply other threads:[~2017-11-21 15:28 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-11-21 15:28 Alexandre Belloni [this message]
2017-11-23 7:05 ` [GIT PULL] RTC for 4.15 Linus Torvalds
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171121152823.payahwcvnnjervgf@piout.net \
--to=alexandre.belloni@free-electrons.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rtc@vger.kernel.org \
--cc=torvalds@linux-foundation.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).