* [PATCH 1/6] ARM: dts: keystone-k2g: Add QSPI DT entry
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
@ 2017-11-23 7:51 ` Vignesh R
2017-11-23 7:51 ` [PATCH 2/6] ARM: dts: keystone-k2g-evm: Fix botched up merge Vignesh R
` (5 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Vignesh R @ 2017-11-23 7:51 UTC (permalink / raw)
To: Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel, Vignesh R
Add DT node for Cadence QSPI IP present in 66AK2G SoC.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g.dtsi | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 8f313ff406b9..01d29320b04c 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -377,6 +377,20 @@
power-domains = <&k2g_pds 0xc>;
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
clock-names = "fck", "mmchsdb_fck";
+ };
+
+ qspi: qspi@2940000 {
+ compatible = "ti,k2g-qspi", "cdns,qspi-nor";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x02940000 0x1000>,
+ <0x24000000 0x4000000>;
+ interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
+ cdns,fifo-depth = <256>;
+ cdns,fifo-width = <4>;
+ cdns,trigger-address = <0x24000000>;
+ clocks = <&k2g_clks 0x43 0x0>;
+ power-domains = <&k2g_pds 0x43>;
status = "disabled";
};
--
2.15.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 2/6] ARM: dts: keystone-k2g-evm: Fix botched up merge
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
2017-11-23 7:51 ` [PATCH 1/6] ARM: dts: keystone-k2g: Add QSPI DT entry Vignesh R
@ 2017-11-23 7:51 ` Vignesh R
2017-11-23 7:51 ` [PATCH 3/6] ARM: dts: keystone-k2g: Move ti,non-removable property to board dts Vignesh R
` (4 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Vignesh R @ 2017-11-23 7:51 UTC (permalink / raw)
To: Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel, Vignesh R
spi1 and ecap0 pinmuxes ended up under root node instead of k2g_pinctrl
node. Fix this by moving them under k2g_pinctrl node.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 30 ++++++++++++++----------------
1 file changed, 14 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 656af194a518..298a50555e46 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -45,22 +45,6 @@
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
-
- ecap0_pins: ecap0_pins {
- pinctrl-single,pins = <
- K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */
- >;
- };
-
- spi1_pins: pinmux_spi1_pins {
- pinctrl-single,pins = <
- K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */
- K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */
- K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */
- K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */
- >;
- };
-
};
&k2g_pinctrl {
@@ -105,6 +89,20 @@
>;
};
+ ecap0_pins: ecap0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1374) (BUFFER_CLASS_B | MUX_MODE4) /* pr1_mdio_data.ecap0_in_apwm0_out */
+ >;
+ };
+
+ spi1_pins: pinmux_spi1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x11a4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_scs0.spi1_scs0 */
+ K2G_CORE_IOPAD(0x11ac) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_clk.spi1_clk */
+ K2G_CORE_IOPAD(0x11b0) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_miso.spi1_miso */
+ K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */
+ >;
+ };
};
&uart0 {
--
2.15.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 3/6] ARM: dts: keystone-k2g: Move ti,non-removable property to board dts
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
2017-11-23 7:51 ` [PATCH 1/6] ARM: dts: keystone-k2g: Add QSPI DT entry Vignesh R
2017-11-23 7:51 ` [PATCH 2/6] ARM: dts: keystone-k2g-evm: Fix botched up merge Vignesh R
@ 2017-11-23 7:51 ` Vignesh R
2017-11-23 7:51 ` [PATCH 4/6] ARM: dts: keystone-k2g-evm: Add QSPI DT node Vignesh R
` (3 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Vignesh R @ 2017-11-23 7:51 UTC (permalink / raw)
To: Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel, Vignesh R
On 66AK2G EVM mmc1 is connected to emmc whereas 66AK2G ICE baord has SD
card slot connected to mmc1. Therefore move emmc specific
ti,non-removable property from SoC file to EVM's dts file.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 1 +
arch/arm/boot/dts/keystone-k2g.dtsi | 1 -
2 files changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 298a50555e46..03b3e7c5dc8e 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -127,6 +127,7 @@
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
vmmc-supply = <&vcc3v3_dcin_reg>; /* VCC3V3_EMMC is connected to VCC3V3_DCIN */
+ ti,non-removable;
status = "okay";
};
diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 01d29320b04c..ef82c0a6e607 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -372,7 +372,6 @@
dma-names = "tx", "rx";
bus-width = <8>;
ti,needs-special-reset;
- ti,non-removable;
max-frequency = <96000000>;
power-domains = <&k2g_pds 0xc>;
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
--
2.15.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 4/6] ARM: dts: keystone-k2g-evm: Add QSPI DT node.
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
` (2 preceding siblings ...)
2017-11-23 7:51 ` [PATCH 3/6] ARM: dts: keystone-k2g: Move ti,non-removable property to board dts Vignesh R
@ 2017-11-23 7:51 ` Vignesh R
2017-11-23 7:51 ` [PATCH 5/6] ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals Vignesh R
` (2 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Vignesh R @ 2017-11-23 7:51 UTC (permalink / raw)
To: Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel, Vignesh R
66AK2G EVM has a s25fl512s flash connected to QSPI. Add DT nodes for the
same.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g-evm.dts | 59 ++++++++++++++++++++++++++++++++++
1 file changed, 59 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g-evm.dts b/arch/arm/boot/dts/keystone-k2g-evm.dts
index 03b3e7c5dc8e..8d100217e38f 100644
--- a/arch/arm/boot/dts/keystone-k2g-evm.dts
+++ b/arch/arm/boot/dts/keystone-k2g-evm.dts
@@ -103,6 +103,18 @@
K2G_CORE_IOPAD(0x11b4) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* spi1_mosi.spi1_mosi */
>;
};
+
+ qspi_pins: pinmux_qspi_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+ K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+ K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+ K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+ K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+ K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+ K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+ >;
+ };
};
&uart0 {
@@ -204,3 +216,50 @@
};
};
};
+
+&qspi {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+ cdns,rclk-en;
+
+ flash0: m25p80@0 {
+ compatible = "s25fl512s", "jedec,spi-nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,read-delay = <5>;
+ cdns,tshsl-ns = <500>;
+ cdns,tsd2d-ns = <500>;
+ cdns,tchsh-ns = <119>;
+ cdns,tslch-ns = <119>;
+
+ partition@0 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition@3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition@4 {
+ label = "QSPI.kernel";
+ reg = <0x001C0000 0x0800000>;
+ };
+ partition@5 {
+ label = "QSPI.file-system";
+ reg = <0x009C0000 0x3640000>;
+ };
+ };
+};
--
2.15.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 5/6] ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
` (3 preceding siblings ...)
2017-11-23 7:51 ` [PATCH 4/6] ARM: dts: keystone-k2g-evm: Add QSPI DT node Vignesh R
@ 2017-11-23 7:51 ` Vignesh R
2017-11-23 7:51 ` [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers Vignesh R
2017-12-03 4:01 ` [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals santosh.shilimkar
6 siblings, 0 replies; 11+ messages in thread
From: Vignesh R @ 2017-11-23 7:51 UTC (permalink / raw)
To: Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel, Vignesh R
Add DT nodes for QSPI, on board LEDS, MMC, I2C, PCA IO expander,
gpio-decoder and regulators on K2G ICE board.
Thanks to Franklin S Cooper Jr <fcooper@ti.com> for initial work on few
peripherals.
Signed-off-by: Franklin S Cooper Jr <fcooper@ti.com>
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/boot/dts/keystone-k2g-ice.dts | 336 +++++++++++++++++++++++++++++++++
1 file changed, 336 insertions(+)
diff --git a/arch/arm/boot/dts/keystone-k2g-ice.dts b/arch/arm/boot/dts/keystone-k2g-ice.dts
index 78692745e0af..1736eb53ad83 100644
--- a/arch/arm/boot/dts/keystone-k2g-ice.dts
+++ b/arch/arm/boot/dts/keystone-k2g-ice.dts
@@ -30,6 +30,191 @@
status = "okay";
};
};
+
+ vmain: fixedregulator-vmain {
+ compatible = "regulator-fixed";
+ regulator-name = "vmain_fixed";
+ regulator-min-microvolt = <24000000>;
+ regulator-max-microvolt = <24000000>;
+ regulator-always-on;
+ };
+
+ v5_0: fixedregulator-v5_0 {
+ /* TPS54531 */
+ compatible = "regulator-fixed";
+ regulator-name = "v5_0_fixed";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vmain>;
+ regulator-always-on;
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ /* TLV62084 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vdd_1v8: fixedregulator-vdd_1v8 {
+ /* TLV62084 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_1v8_fixed";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vdds_ddr: fixedregulator-vdds_ddr {
+ /* TLV62080 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdds_ddr_fixed";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vref_ddr: fixedregulator-vref_ddr {
+ /* LP2996A */
+ compatible = "regulator-fixed";
+ regulator-name = "vref_ddr_fixed";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ };
+
+ vtt_ddr: fixedregulator-vtt_ddr {
+ /* LP2996A */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_ddr_fixed";
+ regulator-min-microvolt = <675000>;
+ regulator-max-microvolt = <675000>;
+ vin-supply = <&vdd_3v3>;
+ regulator-always-on;
+ };
+
+ vdd_0v9: fixedregulator-vdd_0v9 {
+ /* TPS62180 */
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_0v9_fixed";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ vin-supply = <&v5_0>;
+ regulator-always-on;
+ };
+
+ vddb: fixedregulator-vddb {
+ /* TPS22945 */
+ compatible = "regulator-fixed";
+ regulator-name = "vddb_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ gpio = <&gpio1 53 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ gpio-decoder {
+ compatible = "gpio-decoder";
+ gpios = <&pca9536 3 GPIO_ACTIVE_HIGH>,
+ <&pca9536 2 GPIO_ACTIVE_HIGH>,
+ <&pca9536 1 GPIO_ACTIVE_HIGH>,
+ <&pca9536 0 GPIO_ACTIVE_HIGH>;
+ linux,axis = <0>; /* ABS_X */
+ decoder-max-value = <9>;
+ };
+
+ leds1 {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&user_leds>;
+
+ led0 {
+ label = "status0:red:cpu0";
+ gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "cpu0";
+ };
+
+ led1 {
+ label = "status0:green:usr";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led2 {
+ label = "status0:yellow:usr";
+ gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led3 {
+ label = "status1:red:mmc0";
+ gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+
+ led4 {
+ label = "status1:green:usr";
+ gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led5 {
+ label = "status1:yellow:usr";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led6 {
+ label = "status2:red:usr";
+ gpios = <&gpio0 44 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led7 {
+ label = "status2:green:usr";
+ gpios = <&gpio0 43 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led8 {
+ label = "status2:yellow:usr";
+ gpios = <&gpio0 42 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led9 {
+ label = "status3:red:usr";
+ gpios = <&gpio0 41 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led10 {
+ label = "status3:green:usr";
+ gpios = <&gpio0 101 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led11 {
+ label = "status3:yellow:usr";
+ gpios = <&gpio0 102 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ led12 {
+ label = "status4:green:heartbeat";
+ gpios = <&gpio0 19 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
};
&k2g_pinctrl {
@@ -39,6 +224,64 @@
K2G_CORE_IOPAD(0x11d0) (BUFFER_CLASS_B | PIN_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
>;
};
+
+ qspi_pins: pinmux_qspi_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1204) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_clk.qspi_clk */
+ K2G_CORE_IOPAD(0x1208) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_rclk.qspi_rclk */
+ K2G_CORE_IOPAD(0x120c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d0.qspi_d0 */
+ K2G_CORE_IOPAD(0x1210) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d1.qspi_d1 */
+ K2G_CORE_IOPAD(0x1214) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d2.qspi_d2 */
+ K2G_CORE_IOPAD(0x1218) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_d3.qspi_d3 */
+ K2G_CORE_IOPAD(0x121c) (BUFFER_CLASS_B | PULL_DISABLE | MUX_MODE0) /* qspi_csn0.qspi_csn0 */
+ >;
+ };
+
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x10FC) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat3.mmc1_dat3 */
+ K2G_CORE_IOPAD(0x1100) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat2.mmc1_dat2 */
+ K2G_CORE_IOPAD(0x1104) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat1.mmc1_dat1 */
+ K2G_CORE_IOPAD(0x1108) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_dat0.mmc1_dat0 */
+ K2G_CORE_IOPAD(0x110C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_clk.mmc1_clk */
+ K2G_CORE_IOPAD(0x1110) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_cmd.mmc1_cmd */
+ K2G_CORE_IOPAD(0x1114) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* mmc1_sdcd.gpio0_69 */
+ K2G_CORE_IOPAD(0x1118) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_sdwp.mmc1_sdwp */
+ K2G_CORE_IOPAD(0x111C) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* mmc1_pow.mmc1_pow */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x137c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ K2G_CORE_IOPAD(0x1380) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x1384) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_scl.i2c1_scl */
+ K2G_CORE_IOPAD(0x1388) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE0) /* i2c1_sda.i2c1_sda */
+ >;
+ };
+
+ user_leds: pinmux_user_leds {
+ pinctrl-single,pins = <
+ K2G_CORE_IOPAD(0x102c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad11.gpio0_11 */
+ K2G_CORE_IOPAD(0x1030) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad12.gpio0_12 */
+ K2G_CORE_IOPAD(0x1034) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad13.gpio0_13 */
+ K2G_CORE_IOPAD(0x1038) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad14.gpio0_14 */
+ K2G_CORE_IOPAD(0x103c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_ad15.gpio0_15 */
+ K2G_CORE_IOPAD(0x1040) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_clk.gpio0_16 */
+ K2G_CORE_IOPAD(0x104c) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* gpmc_wen.gpio0_19 */
+ K2G_CORE_IOPAD(0x10b0) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data9.gpio0_44 */
+ K2G_CORE_IOPAD(0x10ac) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data10.gpio0_43 */
+ K2G_CORE_IOPAD(0x10a8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data11.gpio0_42 */
+ K2G_CORE_IOPAD(0x10a4) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* dss_data12.gpio0_41 */
+ K2G_CORE_IOPAD(0x11b8) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn0.gpio0_101 */
+ K2G_CORE_IOPAD(0x11bc) (BUFFER_CLASS_B | PIN_PULLUP | MUX_MODE3) /* spi2_scsn1.gpio0_102 */
+ >;
+ };
};
&uart0 {
@@ -51,3 +294,96 @@
memory-region = <&dsp_common_memory>;
status = "okay";
};
+
+&qspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&qspi_pins>;
+ cdns,rclk-en;
+ status = "okay";
+
+ flash0: m25p80@0 {
+ compatible = "s25fl256s1", "jedec,spi-nor";
+ reg = <0>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ spi-max-frequency = <96000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ cdns,read-delay = <5>;
+ cdns,tshsl-ns = <500>;
+ cdns,tsd2d-ns = <500>;
+ cdns,tchsh-ns = <119>;
+ cdns,tslch-ns = <119>;
+
+ partition@0 {
+ label = "QSPI.u-boot";
+ reg = <0x00000000 0x00100000>;
+ };
+ partition@1 {
+ label = "QSPI.u-boot-env";
+ reg = <0x00100000 0x00040000>;
+ };
+ partition@2 {
+ label = "QSPI.skern";
+ reg = <0x00140000 0x0040000>;
+ };
+ partition@3 {
+ label = "QSPI.pmmc-firmware";
+ reg = <0x00180000 0x0040000>;
+ };
+ partition@4 {
+ label = "QSPI.kernel";
+ reg = <0x001c0000 0x0800000>;
+ };
+ partition@5 {
+ label = "QSPI.u-boot-spl-os";
+ reg = <0x009c0000 0x0040000>;
+ };
+ partition@6 {
+ label = "QSPI.file-system";
+ reg = <0x00a00000 0x1600000>;
+ };
+ };
+};
+
+&gpio0 {
+ status = "okay";
+};
+
+&gpio1 {
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vdd_3v3>;
+ cd-gpios = <&gpio0 69 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+ status = "okay";
+
+ eeprom@50 {
+ compatible = "atmel,24c256";
+ reg = <0x50>;
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ status = "okay";
+ clock-frequency = <400000>;
+
+ pca9536: gpio@41 {
+ compatible = "ti,pca9536";
+ reg = <0x41>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ vcc-supply = <&vdd_3v3>;
+ };
+};
--
2.15.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
` (4 preceding siblings ...)
2017-11-23 7:51 ` [PATCH 5/6] ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals Vignesh R
@ 2017-11-23 7:51 ` Vignesh R
2017-12-03 4:00 ` santosh.shilimkar
2017-12-03 4:01 ` [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals santosh.shilimkar
6 siblings, 1 reply; 11+ messages in thread
From: Vignesh R @ 2017-11-23 7:51 UTC (permalink / raw)
To: Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel, Vignesh R
Enable drivers for QSPI, LEDS, gpio-decoder that are present on 66AK2G EVM
and 66AK2G ICE boards.
Signed-off-by: Vignesh R <vigneshr@ti.com>
---
arch/arm/configs/keystone_defconfig | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/configs/keystone_defconfig b/arch/arm/configs/keystone_defconfig
index f710c192b33a..2536c231eea1 100644
--- a/arch/arm/configs/keystone_defconfig
+++ b/arch/arm/configs/keystone_defconfig
@@ -228,3 +228,10 @@ CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_ANSI_CPRNG=y
CONFIG_CRYPTO_USER_API_HASH=y
CONFIG_CRYPTO_USER_API_SKCIPHER=y
+CONFIG_SPI_CADENCE_QUADSPI=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_GPIO_DECODER=m
+CONFIG_GPIO_PCA953X=m
+CONFIG_LEDS_TRIGGER_ACTIVITY=y
+CONFIG_LEDS_TRIGGER_CPU=y
--
2.15.0
^ permalink raw reply related [flat|nested] 11+ messages in thread* Re: [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers
2017-11-23 7:51 ` [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers Vignesh R
@ 2017-12-03 4:00 ` santosh.shilimkar
2017-12-04 9:00 ` Vignesh R
0 siblings, 1 reply; 11+ messages in thread
From: santosh.shilimkar @ 2017-12-03 4:00 UTC (permalink / raw)
To: Vignesh R, Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel
On 11/22/17 11:51 PM, Vignesh R wrote:
> Enable drivers for QSPI, LEDS, gpio-decoder that are present on 66AK2G EVM
> and 66AK2G ICE boards.
>
> Signed-off-by: Vignesh R <vigneshr@ti.com>
> ---
Please submit a patch also to enable all these peripherals
in multi-v7 config. Just enable all remainder
options enabled in keystone config also in multi-v7.
Am pushing this series to next now.
Regards,
Santosh
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers
2017-12-03 4:00 ` santosh.shilimkar
@ 2017-12-04 9:00 ` Vignesh R
2017-12-04 17:36 ` Santosh Shilimkar
0 siblings, 1 reply; 11+ messages in thread
From: Vignesh R @ 2017-12-04 9:00 UTC (permalink / raw)
To: santosh.shilimkar, Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel
Hi,
On Sunday 03 December 2017 09:30 AM, santosh.shilimkar@oracle.com wrote:
> On 11/22/17 11:51 PM, Vignesh R wrote:
>> Enable drivers for QSPI, LEDS, gpio-decoder that are present on 66AK2G
>> EVM
>> and 66AK2G ICE boards.
>>
>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>> ---
> Please submit a patch also to enable all these peripherals
> in multi-v7 config. Just enable all remainder
> options enabled in keystone config also in multi-v7.
K2 Platforms don't boot out of multi_v7_defconfig by default, because K2
platforms require CONFIG_ARM_LPAE(which is disabled in multi-v7).
If the intention is to just have all drivers enabled in
keystone_defconfig to be added to multi_v7, I can prepare a patch for
that and test with local patch to enable LPAE.
>
> Am pushing this series to next now.
>
Thanks!
--
Regards
Vignesh
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers
2017-12-04 9:00 ` Vignesh R
@ 2017-12-04 17:36 ` Santosh Shilimkar
0 siblings, 0 replies; 11+ messages in thread
From: Santosh Shilimkar @ 2017-12-04 17:36 UTC (permalink / raw)
To: Vignesh R, Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel
On 12/4/2017 1:00 AM, Vignesh R wrote:
> Hi,
>
> On Sunday 03 December 2017 09:30 AM, santosh.shilimkar@oracle.com wrote:
>> On 11/22/17 11:51 PM, Vignesh R wrote:
>>> Enable drivers for QSPI, LEDS, gpio-decoder that are present on 66AK2G
>>> EVM
>>> and 66AK2G ICE boards.
>>>
>>> Signed-off-by: Vignesh R <vigneshr@ti.com>
>>> ---
>> Please submit a patch also to enable all these peripherals
>> in multi-v7 config. Just enable all remainder
>> options enabled in keystone config also in multi-v7.
>
> K2 Platforms don't boot out of multi_v7_defconfig by default, because K2
> platforms require CONFIG_ARM_LPAE(which is disabled in multi-v7).
>
> If the intention is to just have all drivers enabled in
> keystone_defconfig to be added to multi_v7, I can prepare a patch for
> that and test with local patch to enable LPAE.
>
Yes. Please send a patch for it.
Regards,
Santosh
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals
2017-11-23 7:51 [PATCH 0/6] 66AK2G: Add DT nodes for few peripherals Vignesh R
` (5 preceding siblings ...)
2017-11-23 7:51 ` [PATCH 6/6] ARM: configs: keystone_defconfig: Enable few peripheral drivers Vignesh R
@ 2017-12-03 4:01 ` santosh.shilimkar
6 siblings, 0 replies; 11+ messages in thread
From: santosh.shilimkar @ 2017-12-03 4:01 UTC (permalink / raw)
To: Vignesh R, Santosh Shilimkar
Cc: Rob Herring, linux-arm-kernel, devicetree, linux-kernel
On 11/22/17 11:51 PM, Vignesh R wrote:
> This patch series adds DT nodes for bunch of peripherials on 66AK2G EVM and
> 66AK2G ICE boards.
>
> Tested on 66AK2G EVM and ICE boards
>
>
> Vignesh R (6):
> ARM: dts: keystone-k2g: Add QSPI DT entry
> ARM: dts: keystone-k2g-evm: Fix botched up merge
> ARM: dts: keystone-k2g: Move ti,non-removable property to board dts
> ARM: dts: keystone-k2g-evm: Add QSPI DT node.
> ARM: dts: keystone-k2g-ice: Add DT nodes for few peripherals
> ARM: configs: keystone_defconfig: Enable few peripheral drivers
>
Series applied. Please submit the follow up patch for
multi-v7 config.
Regards,
Santosh
^ permalink raw reply [flat|nested] 11+ messages in thread