[PATCH v2 1/2] dt-bindings: Add vendor prefix for Bticino

[PATCH v2 1/2] dt-bindings: Add vendor prefix for Bticino

[Jagan Teki]

Added 'bticino' vendor prefix for Bticino International.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Reviewed-by: Rob Herring <robh@kernel.org>
---
Changes for v2:
- Collect review tag from Rob

 Documentation/devicetree/bindings/vendor-prefixes.txt | 1 +
 1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index ae850d6c0ad3..da0ead5b1ea3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -56,6 +56,7 @@ bosch	Bosch Sensortec GmbH
 boundary	Boundary Devices Inc.
 brcm	Broadcom Corporation
 buffalo	Buffalo, Inc.
+bticino Bticino International
 calxeda	Calxeda
 capella	Capella Microsystems, Inc
 cascoda	Cascoda, Ltd.
-- 
2.14.3

[PATCH v2 2/2] ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

[Jagan Teki]

This patch adds initial support for BTicino i.MX6DL Mamoj board.

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
---
Changes for v2:
- Squash 'PFUZE100 support' patch
- Remove fec PHY reset mux

 arch/arm/boot/dts/Makefile         |   1 +
 arch/arm/boot/dts/imx6dl-mamoj.dts | 224 +++++++++++++++++++++++++++++++++++++
 2 files changed, 225 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx6dl-mamoj.dts

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 26e2e290ec28..b5dcc55bd157 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -397,6 +397,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
 	imx6dl-hummingboard2-som-v15.dtb \
 	imx6dl-icore.dtb \
 	imx6dl-icore-rqs.dtb \
+	imx6dl-mamoj.dtb \
 	imx6dl-nit6xlite.dtb \
 	imx6dl-nitrogen6x.dtb \
 	imx6dl-phytec-mira-rdk-nand.dtb \
diff --git a/arch/arm/boot/dts/imx6dl-mamoj.dts b/arch/arm/boot/dts/imx6dl-mamoj.dts
new file mode 100644
index 000000000000..58b676922745
--- /dev/null
+++ b/arch/arm/boot/dts/imx6dl-mamoj.dts
@@ -0,0 +1,224 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2018 BTicino
+ * Copyright (C) 2018 Amarula Solutions B.V.
+ */
+
+/dts-v1/;
+
+#include "imx6dl.dtsi"
+
+/ {
+	model = "BTicino i.MX6DL Mamoj board";
+	compatible = "bticino,imx6dl-mamoj", "fsl,imx6dl";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "mii";
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+
+	pmic: pfuze100@8 {
+		compatible = "fsl,pfuze100";
+		reg = <0x08>;
+
+		regulators {
+			/* CPU vdd_arm core */
+			sw1a_reg: sw1ab {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* SOC vdd_soc */
+			sw1c_reg: sw1c {
+				regulator-min-microvolt = <300000>;
+				regulator-max-microvolt = <1875000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <6250>;
+			};
+
+			/* I/O power GEN_3V3 */
+			sw2_reg: sw2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3a_reg: sw3a {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* DDR memory */
+			sw3b_reg: sw3b {
+				regulator-min-microvolt = <400000>;
+				regulator-max-microvolt = <1975000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			sw4_reg: sw4 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* not used */
+			swbst_reg: swbst {
+				regulator-min-microvolt = <5000000>;
+				regulator-max-microvolt = <5150000>;
+			};
+
+			/* PMIC vsnvs. EX boot mode */
+			snvs_reg: vsnvs {
+				regulator-min-microvolt = <1000000>;
+				regulator-max-microvolt = <3000000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			vref_reg: vrefddr {
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* not used */
+			vgen1_reg: vgen1 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen2_reg: vgen2 {
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1550000>;
+			};
+
+			/* not used */
+			vgen3_reg: vgen3 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+			};
+
+			/* 1v8 general power */
+			vgen4_reg: vgen4 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 2v8 general power IMX6 */
+			vgen5_reg: vgen5 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+
+			/* 3v3 Ethernet */
+			vgen6_reg: vgen6 {
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+			};
+		};
+	};
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	keep-power-in-suspend;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x1b0b0
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x1b0b0
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x1b0b1
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__ENET_TX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_ROW0__ENET_TX_DATA3	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_GPIO_19__ENET_TX_ER		0x1b0b0
+			MX6QDL_PAD_GPIO_18__ENET_RX_CLK		0x1b0b1
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_KEY_COL2__ENET_RX_DATA2	0x1b0b0
+			MX6QDL_PAD_KEY_COL0__ENET_RX_DATA3      0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x1b0b0
+			MX6QDL_PAD_KEY_COL3__ENET_CRS		0x1b0b0
+			MX6QDL_PAD_KEY_ROW1__ENET_COL		0x1b0b0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__I2C4_SCL	0x4001b8b1
+			MX6QDL_PAD_GPIO_8__I2C4_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD	0x17059
+			MX6QDL_PAD_SD3_CLK__SD3_CLK	0x10059
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0	0x17059
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1	0x17059
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2	0x17059
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3	0x17059
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4	0x17059
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5	0x17059
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6	0x17059
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7	0x17059
+		>;
+	};
+};
-- 
2.14.3

Re: [PATCH v2 2/2] ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

[Fabio Estevam]

On Mon, Mar 19, 2018 at 4:41 PM, Jagan Teki <jagan@amarulasolutions.com> wrote:
> This patch adds initial support for BTicino i.MX6DL Mamoj board.
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
> Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>

Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>

Re: [PATCH v2 2/2] ARM: dts: i.MX6: Add BTicino i.MX6DL Mamoj initial support

[Shawn Guo]

On Tue, Mar 20, 2018 at 01:11:14AM +0530, Jagan Teki wrote:
> +&i2c4 {
> +	clock-frequency = <100000>;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&pinctrl_i2c4>;
> +	status = "okay";
> +
> +	pmic: pfuze100@8 {

pfuze100: pmic@8

I fixed it up and applied both patches.

Shawn

> +		compatible = "fsl,pfuze100";
> +		reg = <0x08>;