LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: jacopo mondi <jacopo@jmondi.org>
To: Jacopo Mondi <jacopo+renesas@jmondi.org>
Cc: architt@codeaurora.org, a.hajda@samsung.com,
	Laurent.pinchart@ideasonboard.com, airlied@linux.ie,
	vladimir_zapolskiy@mentor.com, horms@verge.net.au,
	magnus.damm@gmail.com, geert@linux-m68k.org,
	niklas.soderlund@ragnatech.se,
	sergei.shtylyov@cogentembedded.com, robh+dt@kernel.org,
	mark.rutland@arm.com, dri-devel@lists.freedesktop.org,
	linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v8 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver
Date: Fri, 13 Apr 2018 18:28:36 +0200	[thread overview]
Message-ID: <20180413162836.GD6666@w540> (raw)
In-Reply-To: <1523357590-3841-3-git-send-email-jacopo+renesas@jmondi.org>

[-- Attachment #1: Type: text/plain, Size: 7744 bytes --]

Hello,
   small self review, as I've just noticed a trivial error.

On Tue, Apr 10, 2018 at 12:53:10PM +0200, Jacopo Mondi wrote:
> Add DRM bridge driver for Thine THC63LVD1024 LVDS to digital parallel
> output converter.
>
> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
> ---
>  drivers/gpu/drm/bridge/Kconfig        |   6 +
>  drivers/gpu/drm/bridge/Makefile       |   1 +
>  drivers/gpu/drm/bridge/thc63lvd1024.c | 206 ++++++++++++++++++++++++++++++++++
>  3 files changed, 213 insertions(+)
>  create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c
>
> diff --git a/drivers/gpu/drm/bridge/Kconfig b/drivers/gpu/drm/bridge/Kconfig
> index 3aa65bd..42c9c2d 100644
> --- a/drivers/gpu/drm/bridge/Kconfig
> +++ b/drivers/gpu/drm/bridge/Kconfig
> @@ -93,6 +93,12 @@ config DRM_SII9234
>  	  It is an I2C driver, that detects connection of MHL bridge
>  	  and starts encapsulation of HDMI signal.
>
> +config DRM_THINE_THC63LVD1024
> +	tristate "Thine THC63LVD1024 LVDS decoder bridge"
> +	depends on OF
> +	---help---
> +	  Thine THC63LVD1024 LVDS/parallel converter driver.
> +
>  config DRM_TOSHIBA_TC358767
>  	tristate "Toshiba TC358767 eDP bridge"
>  	depends on OF
> diff --git a/drivers/gpu/drm/bridge/Makefile b/drivers/gpu/drm/bridge/Makefile
> index 373eb28..fd90b16 100644
> --- a/drivers/gpu/drm/bridge/Makefile
> +++ b/drivers/gpu/drm/bridge/Makefile
> @@ -8,6 +8,7 @@ obj-$(CONFIG_DRM_PARADE_PS8622) += parade-ps8622.o
>  obj-$(CONFIG_DRM_SIL_SII8620) += sil-sii8620.o
>  obj-$(CONFIG_DRM_SII902X) += sii902x.o
>  obj-$(CONFIG_DRM_SII9234) += sii9234.o
> +obj-$(CONFIG_DRM_THINE_THC63LVD1024) += thc63lvd1024.o
>  obj-$(CONFIG_DRM_TOSHIBA_TC358767) += tc358767.o
>  obj-$(CONFIG_DRM_ANALOGIX_DP) += analogix/
>  obj-$(CONFIG_DRM_I2C_ADV7511) += adv7511/
> diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c
> new file mode 100644
> index 0000000..aa1d650
> --- /dev/null
> +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c
> @@ -0,0 +1,206 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * THC63LVD1024 LVDS to parallel data DRM bridge driver.
> + *
> + * Copyright (C) 2018 Jacopo Mondi <jacopo+renesas@jmondi.org>
> + */
> +
> +#include <drm/drmP.h>
> +#include <drm/drm_bridge.h>
> +#include <drm/drm_panel.h>
> +
> +#include <linux/gpio/consumer.h>
> +#include <linux/of_graph.h>
> +#include <linux/regulator/consumer.h>
> +
> +enum thc63_ports {
> +	THC63_LVDS_IN0,
> +	THC63_LVDS_IN1,
> +	THC63_RGB_OUT0,
> +	THC63_RGB_OUT1,
> +};
> +
> +struct thc63_dev {
> +	struct device *dev;
> +
> +	struct regulator *vcc;
> +
> +	struct gpio_desc *pdwn;
> +	struct gpio_desc *oe;
> +
> +	struct drm_bridge bridge;
> +	struct drm_bridge *next;
> +};
> +
> +static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge)
> +{
> +	return container_of(bridge, struct thc63_dev, bridge);
> +}
> +
> +static int thc63_attach(struct drm_bridge *bridge)
> +{
> +	struct thc63_dev *thc63 = to_thc63(bridge);
> +
> +	return drm_bridge_attach(bridge->encoder, thc63->next, bridge);
> +}
> +
> +static void thc63_enable(struct drm_bridge *bridge)
> +{
> +	struct thc63_dev *thc63 = to_thc63(bridge);
> +	int ret;
> +
> +	ret = regulator_enable(thc63->vcc);
> +	if (ret) {
> +		dev_err(thc63->dev,
> +			"Failed to enable regulator \"vcc\": %d\n", ret);
> +		return;
> +	}
> +
> +	gpiod_set_value(thc63->pdwn, 0);
> +	gpiod_set_value(thc63->oe, 1);
> +}
> +
> +static void thc63_disable(struct drm_bridge *bridge)
> +{
> +	struct thc63_dev *thc63 = to_thc63(bridge);
> +	int ret;
> +
> +	gpiod_set_value(thc63->oe, 0);
> +	gpiod_set_value(thc63->pdwn, 1);
> +
> +	ret = regulator_disable(thc63->vcc);
> +	if (ret)
> +		dev_err(thc63->dev,
> +			"Failed to disable regulator \"vcc\": %d\n", ret);
> +}
> +
> +static const struct drm_bridge_funcs thc63_bridge_func = {
> +	.attach	= thc63_attach,
> +	.enable = thc63_enable,
> +	.disable = thc63_disable,
> +};
> +
> +static int thc63_parse_dt(struct thc63_dev *thc63)
> +{
> +	struct device_node *thc63_out;
> +	struct device_node *remote;
> +
> +	thc63_out = of_graph_get_endpoint_by_regs(thc63->dev->of_node,
> +						  THC63_RGB_OUT0, -1);
> +	if (!thc63_out) {
> +		dev_err(thc63->dev, "Missing endpoint in port@%u\n",
> +			THC63_RGB_OUT0);
> +		return -ENODEV;
> +	}
> +
> +	remote = of_graph_get_remote_port_parent(thc63_out);
> +	of_node_put(thc63_out);
> +	if (!remote) {
> +		dev_err(thc63->dev, "Endpoint in port@%u unconnected\n",
> +			THC63_RGB_OUT0);
> +		return -ENODEV;
> +	}
> +
> +	if (!of_device_is_available(remote)) {
> +		dev_err(thc63->dev, "port@%u remote endpoint is disabled\n",
> +			THC63_RGB_OUT0);
> +		of_node_put(remote);
> +		return -ENODEV;
> +	}
> +
> +	thc63->next = of_drm_find_bridge(remote);
> +	if (!thc63->next) {
> +		of_node_put(remote);
> +		return -EPROBE_DEFER;
> +	}

the 'remote' OF node is only put in the error path.

If there are no other comments on this driver I can send a follow up
patch, or it's easier I can resend the series being it just two small
patches.

Thanks
   j


> +
> +	return 0;
> +}
> +
> +static int thc63_gpio_init(struct thc63_dev *thc63)
> +{
> +	thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW);
> +	if (IS_ERR(thc63->oe)) {
> +		dev_err(thc63->dev, "Unable to get \"oe-gpios\": %ld\n",
> +			PTR_ERR(thc63->oe));
> +		return PTR_ERR(thc63->oe);
> +	}
> +
> +	thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown",
> +					      GPIOD_OUT_HIGH);
> +	if (IS_ERR(thc63->pdwn)) {
> +		dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n",
> +			PTR_ERR(thc63->pdwn));
> +		return PTR_ERR(thc63->pdwn);
> +	}
> +
> +	return 0;
> +}
> +
> +static int thc63_probe(struct platform_device *pdev)
> +{
> +	struct thc63_dev *thc63;
> +	int ret;
> +
> +	thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL);
> +	if (!thc63)
> +		return -ENOMEM;
> +
> +	thc63->dev = &pdev->dev;
> +	platform_set_drvdata(pdev, thc63);
> +
> +	thc63->vcc = devm_regulator_get_optional(thc63->dev, "vcc");
> +	if (IS_ERR(thc63->vcc)) {
> +		if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER)
> +			return -EPROBE_DEFER;
> +
> +		dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n",
> +			PTR_ERR(thc63->vcc));
> +		return PTR_ERR(thc63->vcc);
> +	}
> +
> +	ret = thc63_gpio_init(thc63);
> +	if (ret)
> +		return ret;
> +
> +	ret = thc63_parse_dt(thc63);
> +	if (ret)
> +		return ret;
> +
> +	thc63->bridge.driver_private = thc63;
> +	thc63->bridge.of_node = pdev->dev.of_node;
> +	thc63->bridge.funcs = &thc63_bridge_func;
> +
> +	drm_bridge_add(&thc63->bridge);
> +
> +	return 0;
> +}
> +
> +static int thc63_remove(struct platform_device *pdev)
> +{
> +	struct thc63_dev *thc63 = platform_get_drvdata(pdev);
> +
> +	drm_bridge_remove(&thc63->bridge);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id thc63_match[] = {
> +	{ .compatible = "thine,thc63lvd1024", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, thc63_match);
> +
> +static struct platform_driver thc63_driver = {
> +	.probe	= thc63_probe,
> +	.remove	= thc63_remove,
> +	.driver	= {
> +		.name		= "thc63lvd1024",
> +		.of_match_table	= thc63_match,
> +	},
> +};
> +module_platform_driver(thc63_driver);
> +
> +MODULE_AUTHOR("Jacopo Mondi <jacopo@jmondi.org>");
> +MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.7.4
>

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2018-04-13 16:28 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-10 10:53 [PATCH v8 0/2] drm: Add Thine THC63LVD1024 LVDS decoder bridge Jacopo Mondi
2018-04-10 10:53 ` [PATCH v8 1/2] dt-bindings: display: bridge: Document THC63LVD1024 LVDS decoder Jacopo Mondi
2018-04-13 21:12   ` Rob Herring
2018-04-19  9:44   ` Vladimir Zapolskiy
2018-04-19  9:48     ` Vladimir Zapolskiy
2018-04-19 10:10       ` Vladimir Zapolskiy
2018-04-19 10:32     ` jacopo mondi
2018-04-10 10:53 ` [PATCH v8 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver Jacopo Mondi
2018-04-13 16:28   ` jacopo mondi [this message]
2018-04-19 11:18   ` Vladimir Zapolskiy
2018-04-19 12:33     ` jacopo mondi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180413162836.GD6666@w540 \
    --to=jacopo@jmondi.org \
    --cc=Laurent.pinchart@ideasonboard.com \
    --cc=a.hajda@samsung.com \
    --cc=airlied@linux.ie \
    --cc=architt@codeaurora.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=geert@linux-m68k.org \
    --cc=horms@verge.net.au \
    --cc=jacopo+renesas@jmondi.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    --cc=mark.rutland@arm.com \
    --cc=niklas.soderlund@ragnatech.se \
    --cc=robh+dt@kernel.org \
    --cc=sergei.shtylyov@cogentembedded.com \
    --cc=vladimir_zapolskiy@mentor.com \
    --subject='Re: [PATCH v8 2/2] drm: bridge: Add thc63lvd1024 LVDS decoder driver' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).