LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Borislav Petkov <bp@alien8.de>
To: X86 ML <x86@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>,
	Josh Poimboeuf <jpoimboe@redhat.com>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Peter Zijlstra <peterz@infradead.org>,
	LKML <linux-kernel@vger.kernel.org>
Subject: [PATCH 4/9] x86/dumpstack: Improve opcodes dumping in the Code: section
Date: Tue, 17 Apr 2018 18:11:19 +0200	[thread overview]
Message-ID: <20180417161124.5294-5-bp@alien8.de> (raw)
In-Reply-To: <20180417161124.5294-1-bp@alien8.de>

From: Borislav Petkov <bp@suse.de>

The code used to iterate byte-by-byte over the bytes around RIP and that
is expensive: disabling pagefaults around it, copy_from_user, etc...

Make it read the whole buffer of OPCODE_BUFSIZE size in one go. Use a
statically allocated 64 bytes buffer so that concurrent show_opcodes()
do not interleave in the output even though in the majority of the cases
we sync on die_lock. Except the #PF path which doesn't...

Also, do the PAGE_OFFSET check outside of the function because latter
will be reused in other context.

Signed-off-by: Borislav Petkov <bp@suse.de>
---
 arch/x86/kernel/dumpstack.c | 31 +++++++++++++++----------------
 1 file changed, 15 insertions(+), 16 deletions(-)

diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c
index eb9d6c00a52f..1d6698b54527 100644
--- a/arch/x86/kernel/dumpstack.c
+++ b/arch/x86/kernel/dumpstack.c
@@ -72,29 +72,24 @@ static void printk_stack_address(unsigned long address, int reliable,
 
 static void show_opcodes(u8 *rip)
 {
-	unsigned int code_prologue = OPCODE_BUFSIZE * 43 / 64;
-	unsigned int code_len = OPCODE_BUFSIZE;
-	unsigned char c;
+	unsigned int code_prologue = OPCODE_BUFSIZE * 2 / 3;
+	u8 opcodes[OPCODE_BUFSIZE];
 	u8 *ip;
 	int i;
 
 	printk(KERN_DEFAULT "Code: ");
 
 	ip = (u8 *)rip - code_prologue;
-	if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
-		/* try starting at IP */
-		ip = (u8 *)rip;
-		code_len = code_len - code_prologue + 1;
+	if (probe_kernel_read(opcodes, ip, OPCODE_BUFSIZE)) {
+		pr_cont("Bad RIP value.\n");
+		return;
 	}
-	for (i = 0; i < code_len; i++, ip++) {
-		if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) {
-			pr_cont(" Bad RIP value.");
-			break;
-		}
-		if (ip == (u8 *)rip)
-			pr_cont("<%02x> ", c);
+
+	for (i = 0; i < OPCODE_BUFSIZE; i++, ip++) {
+		if (ip == rip)
+			pr_cont("<%02x> ", opcodes[i]);
 		else
-			pr_cont("%02x ", c);
+			pr_cont("%02x ", opcodes[i]);
 	}
 	pr_cont("\n");
 }
@@ -402,6 +397,10 @@ void show_regs(struct pt_regs *regs)
 	 */
 	if (!user_mode(regs)) {
 		show_trace_log_lvl(current, regs, NULL, KERN_DEFAULT);
-		show_opcodes((u8 *)regs->ip);
+
+		if (regs->ip < PAGE_OFFSET)
+			printk(KERN_DEFAULT "Code: Bad RIP value.\n");
+		else
+			show_opcodes((u8 *)regs->ip);
 	}
 }
-- 
2.13.0

  parent reply	other threads:[~2018-04-17 16:13 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-17 16:11 [PATCH 0/9] x86/dumpstack: Cleanups and user opcode bytes Code: section, v3 Borislav Petkov
2018-04-17 16:11 ` [PATCH 1/9] x86/dumpstack: Remove code_bytes Borislav Petkov
2018-04-26 14:18   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 2/9] x86/dumpstack: Unexport oops_begin() Borislav Petkov
2018-04-26 14:19   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 3/9] x86/dumpstack: Carve out Code: dumping into a function Borislav Petkov
2018-04-26 14:19   ` [tip:x86/cleanups] x86/dumpstack: Carve out code-dumping " tip-bot for Borislav Petkov
2018-04-17 16:11 ` Borislav Petkov [this message]
2018-04-26 14:20   ` [tip:x86/cleanups] x86/dumpstack: Improve opcodes dumping in the code section tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 5/9] x86/dumpstack: Add loglevel argument to show_opcodes() Borislav Petkov
2018-04-26 14:20   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 6/9] x86/fault: Dump user opcode bytes on fatal faults Borislav Petkov
2018-04-26 14:21   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 7/9] x86/dumpstack: Add a show_ip() function Borislav Petkov
2018-04-26 14:21   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 8/9] x86/dumpstack: Save first regs set for the executive summary Borislav Petkov
2018-04-26 14:22   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
2018-04-17 16:11 ` [PATCH 9/9] x86/dumpstack: Explain the reasoning for the prologue and buffer size Borislav Petkov
2018-04-26 14:22   ` [tip:x86/cleanups] " tip-bot for Borislav Petkov
  -- strict thread matches above, loose matches on Subject: below --
2018-03-15 15:44 [PATCH 0/9] x86/dumpstack: Cleanups and user opcode bytes Code: section, v2 Borislav Petkov
2018-03-15 15:44 ` [PATCH 4/9] x86/dumpstack: Improve opcodes dumping in the Code: section Borislav Petkov
2018-03-15 18:10   ` Josh Poimboeuf
2018-03-15 18:16     ` Borislav Petkov
2018-03-15 19:06       ` Josh Poimboeuf
2018-03-16 11:57       ` David Laight
2018-03-15 18:19   ` Josh Poimboeuf
2018-03-15 18:23   ` Josh Poimboeuf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180417161124.5294-5-bp@alien8.de \
    --to=bp@alien8.de \
    --cc=jpoimboe@redhat.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luto@amacapital.net \
    --cc=peterz@infradead.org \
    --cc=torvalds@linux-foundation.org \
    --cc=x86@kernel.org \
    --subject='Re: [PATCH 4/9] x86/dumpstack: Improve opcodes dumping in the Code: section' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).