LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Lina Iyer <ilina@codeaurora.org>
To: andy.gross@linaro.org, david.brown@linaro.org,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
Cc: rnayak@codeaurora.org, bjorn.andersson@linaro.org,
	linux-kernel@vger.kernel.org, sboyd@kernel.org,
	evgreen@chromium.org, dianders@chromium.org,
	Lina Iyer <ilina@codeaurora.org>
Subject: [PATCH v6 00/10] drivers/qcom: add RPMH communication support
Date: Thu, 19 Apr 2018 16:16:25 -0600	[thread overview]
Message-ID: <20180419221635.17849-1-ilina@codeaurora.org> (raw)

Changes in v6:
- Remove tasklet in rpmh-rsc.c
- Remove rpmh_client and use struct device * instead
- Variable changes and bug fixes
- DT binding changes to describe all DRVs in the RSC
- Documentation and comment fixes

Changes in v5:
- Add Reviewed-by tags
- Rebase on top of 4.16

Changes in v4:
- Rename variables as suggested by Stephen and Evan
- Lot of minor syntax and style fixes
- Fix FTRACE compilation error
- Improve doc comments and DT description

Changes in v3:
- Address Steven's comments in FTRACE
- Fix DT documentation as suggested by Rob H
- Fix error handling in IRQ handler as suggested by Evan
- Remove locks in rpmh_flush()
- Improve comments

Changes in v2:
- Added sleep/wake, async and batch requests support
- Addressed Bjorn's comments
- Private FTRACE for drivers/soc/qcom as suggested by Steven
- Sparse checked on these patches
- Use SPDX license commenting sytle

This set of patches add the ability for platform drivers to make use of shared
resources in newer Qualcomm SoCs like SDM845. Resources that are shared between
multiple processors in a SoC are generally controlled by a dedicated remote
processor. The remote processor (Resource Power Manager or RPM in previous QCOM
SoCs) receives requests for resource state from other processors using the
shared resource, aggregates the request and applies the result on the shared
resource. SDM845 advances this concept and uses h/w (hardened I/P) blocks for
aggregating requests and applying the result on the resource. The resources
could be clocks, regulators or bandwidth requests for buses. This new
architecture is called RPM-hardened or RPMH in short.

Since this communication mechanism is completely hardware driven without a
processor intervention on the remote end, existing mechanisms like RPM-SMD are
no longer useful. Also, there is no serialization of data or is data is written
to a shared memory in this new format. The data used is different, unsigned 32
bits are used for representing an address, data and header. Each resource's
property is a unique u32 address and have pre-defined set of property specific
valid values. A request that comprises of <header, addr, data> is sent by
writing to a set of registers from Linux and transmitted to the remote slave
through an internal bus. The remote end aggregates this request along with
requests from other processors for the <addr> and applies the result.

The hardware block that houses this functionality is called Resource State
Coordinator or RSC. Inside the RSC are set of slots for sending RPMH requests
called Trigger Commands Sets (TCS). The set of patches are for writing the
requests into these TCSes and sending them to hardened IP blocks.

The driver design is split into two components. The RSC driver housed in
rpmh-rsc.c and the set of library functions in rpmh.c that frame the request and
transmit it using the controller. This first set of patches allow a simple
synchronous request to be made by the platform drivers. Future patches will add
more functionality that cater to complex drivers and use cases.

Please consider reviewing this patchset.

v1: https://www.spinics.net/lists/devicetree/msg210980.html
v2: https://lkml.org/lkml/2018/2/15/852
v3: https://lkml.org/lkml/2018/3/2/801
v4: https://lkml.org/lkml/2018/3/9/979
v5: https://lkml.org/lkml/2018/4/5/480

Lina Iyer (10):
  drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs
  dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs
  drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE
  drivers: qcom: rpmh: add RPMH helper functions
  drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS
  drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS
  drivers: qcom: rpmh: cache sleep/wake state requests
  drivers: qcom: rpmh: allow requests to be sent asynchronously
  drivers: qcom: rpmh: add support for batch RPMH request
  drivers: qcom: rpmh-rsc: allow active requests from wake TCS

 .../devicetree/bindings/soc/qcom/rpmh-rsc.txt | 132 ++++
 drivers/soc/qcom/Kconfig                      |  10 +
 drivers/soc/qcom/Makefile                     |   4 +
 drivers/soc/qcom/rpmh-internal.h              |  83 +++
 drivers/soc/qcom/rpmh-rsc.c                   | 674 ++++++++++++++++++
 drivers/soc/qcom/rpmh.c                       | 578 +++++++++++++++
 drivers/soc/qcom/trace-rpmh.h                 |  81 +++
 include/dt-bindings/soc/qcom,rpmh-rsc.h       |  14 +
 include/soc/qcom/rpmh.h                       |  51 ++
 include/soc/qcom/tcs.h                        |  56 ++
 10 files changed, 1683 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/soc/qcom/rpmh-rsc.txt
 create mode 100644 drivers/soc/qcom/rpmh-internal.h
 create mode 100644 drivers/soc/qcom/rpmh-rsc.c
 create mode 100644 drivers/soc/qcom/rpmh.c
 create mode 100644 drivers/soc/qcom/trace-rpmh.h
 create mode 100644 include/dt-bindings/soc/qcom,rpmh-rsc.h
 create mode 100644 include/soc/qcom/rpmh.h
 create mode 100644 include/soc/qcom/tcs.h

--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

             reply	other threads:[~2018-04-19 22:16 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-19 22:16 Lina Iyer [this message]
2018-04-19 22:16 ` [PATCH v6 01/10] drivers: qcom: rpmh-rsc: add RPMH controller for QCOM SoCs Lina Iyer
2018-04-19 22:16 ` [PATCH v6 02/10] dt-bindings: introduce RPMH RSC bindings for Qualcomm SoCs Lina Iyer
2018-05-01 23:45   ` Doug Anderson
2018-05-02 14:56     ` Lina Iyer
2018-04-19 22:16 ` [PATCH v6 03/10] drivers: qcom: rpmh-rsc: log RPMH requests in FTRACE Lina Iyer
2018-04-19 22:16 ` [PATCH v6 04/10] drivers: qcom: rpmh: add RPMH helper functions Lina Iyer
2018-04-26 18:05   ` Matthias Kaehlcke
2018-04-27 16:55     ` Lina Iyer
2018-04-19 22:16 ` [PATCH v6 05/10] drivers: qcom: rpmh-rsc: write sleep/wake requests to TCS Lina Iyer
2018-04-25 21:41   ` Matthias Kaehlcke
2018-04-27 17:39     ` Lina Iyer
2018-04-27 18:40       ` Matthias Kaehlcke
2018-04-27 19:45         ` Lina Iyer
2018-04-27 20:06           ` Matthias Kaehlcke
2018-04-27 21:32             ` Lina Iyer
2018-04-27 21:54               ` Matthias Kaehlcke
2018-04-27 23:24                 ` Doug Anderson
2018-05-01 16:10                   ` Lina Iyer
2018-05-01 16:42                     ` Doug Anderson
2018-05-01 17:35                       ` Lina Iyer
2018-05-01 16:45                     ` Matthias Kaehlcke
2018-04-19 22:16 ` [PATCH v6 06/10] drivers: qcom: rpmh-rsc: allow invalidation of sleep/wake TCS Lina Iyer
2018-04-25 22:11   ` Matthias Kaehlcke
2018-04-27 16:44     ` Lina Iyer
2018-04-27 16:54       ` Matthias Kaehlcke
2018-04-19 22:16 ` [PATCH v6 07/10] drivers: qcom: rpmh: cache sleep/wake state requests Lina Iyer
2018-04-19 22:16 ` [PATCH v6 08/10] drivers: qcom: rpmh: allow requests to be sent asynchronously Lina Iyer
2018-04-19 22:16 ` [PATCH v6 09/10] drivers: qcom: rpmh: add support for batch RPMH request Lina Iyer
2018-04-25 23:41   ` Matthias Kaehlcke
2018-04-27 16:24     ` Lina Iyer
2018-04-19 22:16 ` [PATCH v6 10/10] drivers: qcom: rpmh-rsc: allow active requests from wake TCS Lina Iyer
2018-04-26  1:14   ` Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180419221635.17849-1-ilina@codeaurora.org \
    --to=ilina@codeaurora.org \
    --cc=andy.gross@linaro.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=dianders@chromium.org \
    --cc=evgreen@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=rnayak@codeaurora.org \
    --cc=sboyd@kernel.org \
    --subject='Re: [PATCH v6 00/10] drivers/qcom: add RPMH communication support' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).