LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Thierry Escande <thierry.escande@linaro.org>
To: Andy Gross <andy.gross@linaro.org>, David Brown <david.brown@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warnings
Date: Fri, 20 Apr 2018 12:39:13 +0200	[thread overview]
Message-ID: <20180420103913.10133-1-thierry.escande@linaro.org> (raw)

Remove the usage of IRQ_TYPE_NONE to fix loud warnings from
patch (83a86fbb5b56b "irqchip/gic: Loudly complain about
the use of IRQ_TYPE_NONE").

Signed-off-by: Thierry Escande <thierry.escande@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064.dtsi | 52 ++++++++++++++++++-------------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi
index 5341a39c0392..f26613ffc9e7 100644
--- a/arch/arm/boot/dts/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8064.dtsi
@@ -444,7 +444,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12450000 0x100>,
 				      <0x12400000 0x03>;
-				interrupts = <0 193 0x0>;
+				interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -456,7 +456,7 @@
 				pinctrl-1 = <&i2c1_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x12460000 0x1000>;
-				interrupts = <0 194 IRQ_TYPE_NONE>;
+				interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
@@ -484,7 +484,7 @@
 				pinctrl-0 = <&i2c2_pins>;
 				pinctrl-1 = <&i2c2_pins_sleep>;
 				pinctrl-names = "default", "sleep";
-				interrupts = <0 196 IRQ_TYPE_NONE>;
+				interrupts = <0 196 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
 				#address-cells = <1>;
@@ -508,7 +508,7 @@
 				pinctrl-1 = <&i2c3_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16280000 0x1000>;
-				interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI3_QUP_CLK>,
 					 <&gcc GSBI3_H_CLK>;
 				clock-names = "core", "iface";
@@ -534,7 +534,7 @@
 				pinctrl-1 = <&i2c4_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI4_QUP_CLK>,
 					 <&gcc GSBI4_H_CLK>;
 				clock-names = "core", "iface";
@@ -556,7 +556,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x100>,
 				      <0x1a200000 0x03>;
-				interrupts = <0 154 0x0>;
+				interrupts = <0 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -565,7 +565,7 @@
 			gsbi5_spi: spi@1a280000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				reg = <0x1a280000 0x1000>;
-				interrupts = <0 155 0>;
+				interrupts = <0 155 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-0 = <&spi5_default>;
 				pinctrl-1 = <&spi5_sleep>;
 				pinctrl-names = "default", "sleep";
@@ -592,7 +592,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16540000 0x100>,
 				      <0x16500000 0x03>;
-				interrupts = <0 156 0x0>;
+				interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -604,7 +604,7 @@
 				pinctrl-1 = <&i2c6_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16580000 0x1000>;
-				interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI6_QUP_CLK>,
 					 <&gcc GSBI6_H_CLK>;
 				clock-names = "core", "iface";
@@ -628,7 +628,7 @@
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
 				      <0x16600000 0x1000>;
-				interrupts = <0 158 0x0>;
+				interrupts = <0 158 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
 				status = "disabled";
@@ -640,7 +640,7 @@
 				pinctrl-1 = <&i2c7_pins_sleep>;
 				pinctrl-names = "default", "sleep";
 				reg = <0x16680000 0x1000>;
-				interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
+				interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_QUP_CLK>,
 					 <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
@@ -1056,7 +1056,7 @@
 			compatible		= "qcom,apq8064-ahci", "generic-ahci";
 			status			= "disabled";
 			reg			= <0x29000000 0x180>;
-			interrupts		= <GIC_SPI 209 IRQ_TYPE_NONE>;
+			interrupts		= <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks			= <&gcc SFAB_SATA_S_H_CLK>,
 						<&gcc SATA_H_CLK>,
@@ -1082,7 +1082,7 @@
 		sdcc1bam:dma@12402000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
-			interrupts = <0 98 0>;
+			interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -1092,7 +1092,7 @@
 		sdcc3bam:dma@12182000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
-			interrupts = <0 96 0>;
+			interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -1102,7 +1102,7 @@
 		sdcc4bam:dma@121c2000{
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x121c2000 0x8000>;
-			interrupts = <0 95 0>;
+			interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC4_H_CLK>;
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
@@ -1181,7 +1181,7 @@
 			compatible = "qcom,adreno-3xx";
 			reg = <0x04300000 0x20000>;
 			reg-names = "kgsl_3d0_reg_memory";
-			interrupts = <GIC_SPI 80 0>;
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "kgsl_3d0_irq";
 			clock-names =
 			    "core_clk",
@@ -1281,7 +1281,7 @@
 			label = "MDSS DSI CTRL->0";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			interrupts = <GIC_SPI 82 0>;
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
 			reg = <0x04700000 0x200>;
 			reg-names = "dsi_ctrl";
 
@@ -1350,8 +1350,8 @@
 			    <&mmcc MDP_AXI_CLK>;
 			reg = <0x07500000 0x100000>;
 			interrupts =
-			    <GIC_SPI 63 0>,
-			    <GIC_SPI 64 0>;
+			    <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ncb = <2>;
 		};
 
@@ -1366,8 +1366,8 @@
 			    <&mmcc MDP_AXI_CLK>;
 			reg = <0x07600000 0x100000>;
 			interrupts =
-			    <GIC_SPI 61 0>,
-			    <GIC_SPI 62 0>;
+			    <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ncb = <2>;
 		};
 
@@ -1382,8 +1382,8 @@
 			    <&mmcc GFX3D_AXI_CLK>;
 			reg = <0x07c00000 0x100000>;
 			interrupts =
-			    <GIC_SPI 69 0>,
-			    <GIC_SPI 70 0>;
+			    <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ncb = <3>;
 		};
 
@@ -1398,8 +1398,8 @@
 			    <&mmcc GFX3D_AXI_CLK>;
 			reg = <0x07d00000 0x100000>;
 			interrupts =
-			    <GIC_SPI 210 0>,
-			    <GIC_SPI 211 0>;
+			    <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>,
+			    <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
 			qcom,ncb = <3>;
 		};
 
@@ -1418,7 +1418,7 @@
 			#size-cells = <2>;
 			ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000   /* I/O */
 				  0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
-			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
+			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-- 
2.14.1

             reply	other threads:[~2018-04-20 10:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-20 10:39 Thierry Escande [this message]
2018-05-10  8:11 ` Amit Kucheria

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180420103913.10133-1-thierry.escande@linaro.org \
    --to=thierry.escande@linaro.org \
    --cc=andy.gross@linaro.org \
    --cc=david.brown@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-soc@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --subject='Re: [PATCH] ARM: dts: qcom-apq8064: fix gic_irq_domain_translate warnings' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).