LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: <jan.tuerk@emtrion.com>
To: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Thierry Reding <thierry.reding@gmail.com>,
	David Airlie <airlied@linux.ie>, Shawn Guo <shawnguo@kernel.org>,
	Sascha Hauer <kernel@pengutronix.de>,
	"Fabio Estevam" <fabio.estevam@nxp.com>,
	Russell King <linux@armlinux.org.uk>,
	"Jan Tuerk" <jan.tuerk@emtrion.com>, <devicetree@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <dri-devel@lists.freedesktop.org>,
	<linux-arm-kernel@lists.infradead.org>
Subject: [PATCH v3 2/6] drm/panel: Add support for the EDT ETM0700G0EDH6
Date: Fri, 20 Apr 2018 14:50:49 +0200	[thread overview]
Message-ID: <20180420125108.14197-3-jan.tuerk@emtrion.com> (raw)
In-Reply-To: <20180420125108.14197-1-jan.tuerk@emtrion.com>

From: Jan Tuerk <jan.tuerk@emtrion.com>

The Emerging Display Technology ETM0700G0EDH6 is the
uses the same panel as the ETM0700G0BDH6. It differs
in the hardware design for the backlight and the
touchscreen i2c interface. As the new display type has
different requirements for drive-strengths on the i2c-bus,
add an additional compatible to allow the handling of it or warn
about incompatible cpu and display combinations.

Signed-off-by: Jan Tuerk <jan.tuerk@emtrion.com>
---
 drivers/gpu/drm/panel/panel-simple.c | 3 +++
 1 file changed, 3 insertions(+)

diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
index 8b7feb2888f2..2eed60134fa3 100644
--- a/drivers/gpu/drm/panel/panel-simple.c
+++ b/drivers/gpu/drm/panel/panel-simple.c
@@ -2149,6 +2149,9 @@ static const struct of_device_id platform_of_match[] = {
 		.compatible = "edt,etm0700g0bdh6",
 		.data = &edt_etm0700g0bdh6,
 	}, {
+		.compatible = "edt,etm0700g0edh6",
+		.data = &edt_etm0700g0bdh6,
+	}, {
 		.compatible = "foxlink,fl500wvr00-a0t",
 		.data = &foxlink_fl500wvr00_a0t,
 	}, {
-- 
2.11.0

  parent reply	other threads:[~2018-04-20 12:57 UTC|newest]

Thread overview: 74+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-11-23 12:55 [PATCH 0/5] Add basic support for emtrion emCON-MX6 modules Jan Tuerk
2017-11-23 12:55 ` [PATCH 1/5] drm/panel: Add support for the EDT ETM0700G0BDH6 Jan Tuerk
2017-11-23 15:08   ` Fabio Estevam
2017-11-23 15:18     ` AW: " Türk, Jan
2017-11-24 14:21       ` Fabio Estevam
2017-11-24 14:59         ` AW: " Türk, Jan
2017-11-26 19:10   ` Rob Herring
2017-11-23 12:55 ` [PATCH 2/5] dt-bindings: Add vendor prefix for emtrion GmbH Jan Tuerk
2017-11-23 12:58   ` Andreas Färber
2017-11-26 19:12   ` Rob Herring
2017-11-23 12:55 ` [PATCH 3/5] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2017-11-23 13:00   ` Andreas Färber
2017-11-23 12:55 ` [PATCH 4/5] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2017-11-26 19:24   ` Rob Herring
2017-11-28 10:52     ` AW: " Türk, Jan
2017-11-23 12:55 ` [PATCH 5/5] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support Jan Tuerk
2017-12-20 13:47 ` [PATCH v2 0/5] Add basic support for emtrion emCON-MX6 modules jan.tuerk
2017-12-20 13:47   ` [PATCH v2 1/5] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2017-12-21 22:59     ` Rob Herring
2018-04-20 12:50     ` [PATCH v3 0/6] Add basic support for emtrion emCON-MX6 modules jan.tuerk
2018-04-20 12:50       ` [PATCH v3 1/6] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2018-04-20 12:50       ` jan.tuerk [this message]
2018-04-20 12:50       ` [PATCH v3 3/6] dt-bindings: display: Document the EDT et* displays in one file jan.tuerk
2018-04-20 12:50       ` [PATCH v3 4/6] ARM: dts: imx: Add an cpu0 label for imx6dl devices jan.tuerk
2018-04-20 12:50       ` [PATCH v3 5/6] ARM: dts: Add support for emtrion emCON-MX6 series jan.tuerk
2018-04-23  8:44         ` Shawn Guo
2018-04-24  8:32           ` AW: " Türk, Jan
2018-04-26 13:46             ` Rob Herring
2018-04-20 12:50       ` [PATCH v3 6/6] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support jan.tuerk
2018-04-27 13:24       ` [PATCH v4 0/7] Add basic support for emtrion emCON-MX6 modules jan.tuerk
2018-04-27 13:24         ` [PATCH v4 1/7] dt-bindings: display: Document the EDT et* displays in one file jan.tuerk
2018-04-27 14:35           ` Rob Herring
2018-06-19  9:55           ` [PATCH 1/3] " jan.tuerk
2018-06-19  9:55             ` [PATCH 2/3] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2018-06-19  9:55             ` [PATCH 3/3] drm/panel: Add support for the EDT ETM0700G0EDH6 jan.tuerk
2018-07-09 17:27             ` [PATCH 1/3] dt-bindings: display: Document the EDT et* displays in one file Thierry Reding
2018-04-27 13:24         ` [PATCH v4 2/7] drm/panel: Add support for the EDT ETM0700G0BDH6 jan.tuerk
2018-04-27 13:24         ` [PATCH v4 3/7] drm/panel: Add support for the EDT ETM0700G0EDH6 jan.tuerk
2018-04-27 13:24         ` [PATCH v4 4/7] ARM: dts: imx: Add an cpu0 label for imx6dl devices jan.tuerk
2018-04-27 13:24         ` [PATCH v4 5/7] dt-bindings: arm: Document emtrion emCON-MX6 bindings jan.tuerk
2018-04-27 14:45           ` Rob Herring
2018-04-27 13:24         ` [PATCH v4 6/7] ARM: dts: Add support for emtrion emCON-MX6 series jan.tuerk
2018-04-28  3:12           ` Shawn Guo
2018-05-03 10:00             ` AW: " Türk, Jan
2018-05-04  7:03               ` Shawn Guo
2018-04-27 13:24         ` [PATCH v4 7/7] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support jan.tuerk
2018-04-28  2:34         ` [PATCH v4 0/7] Add basic support for emtrion emCON-MX6 modules Shawn Guo
2018-05-03 10:01           ` AW: " Türk, Jan
2018-08-22 15:51         ` [PATCH v5 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-08-22 15:51           ` [PATCH v5 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-08-22 15:51           ` [PATCH v5 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-08-22 15:51           ` [PATCH v5 4/4] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support Jan Tuerk
2018-08-22 16:26             ` Fabio Estevam
2018-08-24 13:26           ` [PATCH v6 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-08-24 13:26             ` [PATCH v6 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-08-28 22:16               ` Rob Herring
2018-08-24 13:26             ` [PATCH v6 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-08-27  1:13               ` Shawn Guo
2018-08-24 13:26             ` [PATCH v6 4/4] ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support Jan Tuerk
2018-08-29 10:07             ` [PATCH v7 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-08-29 10:07               ` [PATCH v7 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-08-29 12:46                 ` Rob Herring
2018-08-29 10:07               ` [PATCH v7 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-08-29 10:08               ` [PATCH v7 4/4] ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support Jan Tuerk
2018-11-27 15:04               ` [PATCH v8 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Jan Tuerk
2018-11-27 15:04                 ` [PATCH v8 2/4] dt-bindings: arm: Document emtrion emCON-MX6 bindings Jan Tuerk
2018-11-27 15:04                 ` [PATCH v8 3/4] ARM: dts: Add support for emtrion emCON-MX6 series Jan Tuerk
2018-11-27 15:04                 ` [PATCH v8 4/4] ARM: imx_v6_v7_defconfig: Enable DA9063 PMIC support Jan Tuerk
2018-11-28  2:06                 ` [PATCH v8 1/4] ARM: dts: imx: Add an cpu0 label for imx6dl devices Shawn Guo
2017-12-20 13:47   ` [PATCH v2 2/5] dt-bindings: Add vendor prefix for emtrion GmbH jan.tuerk
2017-12-20 13:47   ` [PATCH v2 3/5] ARM: dts: imx: Add an cpu0 label for imx6dl devices jan.tuerk
2017-12-20 13:47   ` [PATCH v2 4/5] ARM: dts: Add support for emtrion emCON-MX6 series jan.tuerk
2017-12-21 23:19     ` Rob Herring
2017-12-20 13:47   ` [PATCH v2 5/5] ARM: imx_v6_v7_defconfig: Enable DA0963 PMIC support jan.tuerk

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180420125108.14197-3-jan.tuerk@emtrion.com \
    --to=jan.tuerk@emtrion.com \
    --cc=airlied@linux.ie \
    --cc=devicetree@vger.kernel.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    --cc=thierry.reding@gmail.com \
    --subject='Re: [PATCH v3 2/6] drm/panel: Add support for the EDT ETM0700G0EDH6' \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).