LKML Archive on
help / color / mirror / Atom feed
From: Russell King - ARM Linux <>
To: Paul Kocialkowski <>
Cc:,,, Shawn Guo <>,
	Sascha Hauer <>,
	Fabio Estevam <>,
	Rob Herring <>,
	Mark Rutland <>
Subject: Re: [PATCH] ARM: dts: imx6qdl-cubox-i: Move card-detect GPIO to 1.5 SOM devices only
Date: Sun, 22 Apr 2018 15:39:12 +0100	[thread overview]
Message-ID: <> (raw)
In-Reply-To: <>

On Sun, Apr 22, 2018 at 04:21:51PM +0200, Paul Kocialkowski wrote:
> The Solid-Run CuBox-i lower board used in the first generation of
> CuBox-i devices feature a hinged micro SD card slot, that does not have
> card-detect capability. Since the card-detect GPIO was specified in the
> common cubox-i dtsi, it is moved to each device using the 1.5 SOM and is
> thus removed from the imx6q-cubox-i dts.

This seems incorrect.

The 1.5 SOM is a relatively recent thing, and I have one of the first
Cubox-i's that were produced which is not hinged, and does not have a
1.5 SOM.  There is _no_ correlation between the 1.5 SOM and the SD
card slot.

Talking to folk at SolidRun, we're all confused about your assertions.

We're also confused about "hinged micro SD card slot" - Cubox-i's
come with either a push-push slot or a static (push-in, pull-out) slot.
(Prototypes were the latter.)

Maybe someone's modified yours?

RMK's Patch system:
FTTC broadband for 0.8mile line in suburbia: sync at 8.8Mbps down 630kbps up
According to 8.21Mbps down 510kbps up

  reply	other threads:[~2018-04-22 14:39 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-22 14:21 Paul Kocialkowski
2018-04-22 14:39 ` Russell King - ARM Linux [this message]
2018-04-22 17:22   ` Paul Kocialkowski
2018-04-29 13:47     ` Paul Kocialkowski
2018-04-29 14:09       ` Jon Nettleton
2018-04-29 15:37         ` Paul Kocialkowski
     [not found]   ` <>
2018-04-22 17:23     ` Paul Kocialkowski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \ \ \ \ \ \ \ \ \ \ \ \
    --subject='Re: [PATCH] ARM: dts: imx6qdl-cubox-i: Move card-detect GPIO to 1.5 SOM devices only' \

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).