LKML Archive on lore.kernel.org
help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson " <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>
Cc: Jonathan Corbet <corbet@lwn.net>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, <linux-doc@vger.kernel.org>,
<kishon@ti.com>, <linux-mmc@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>
Subject: [PATCH v3 01/15] ARM: dts: dra72-evm-common: Remove mmc specific pinmux
Date: Wed, 25 Apr 2018 18:24:35 +0530 [thread overview]
Message-ID: <20180425125449.19755-2-kishon@ti.com> (raw)
In-Reply-To: <20180425125449.19755-1-kishon@ti.com>
mmc specific pinmux is selected from dra72x-mmc-iodelay.dtsi, so remove
it from dra72-evm-common.dtsi.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/boot/dts/dra72-evm-common.dtsi | 27 -------------------------
1 file changed, 27 deletions(-)
diff --git a/arch/arm/boot/dts/dra72-evm-common.dtsi b/arch/arm/boot/dts/dra72-evm-common.dtsi
index e85f560a2f78..8e3b185d864b 100644
--- a/arch/arm/boot/dts/dra72-evm-common.dtsi
+++ b/arch/arm/boot/dts/dra72-evm-common.dtsi
@@ -174,33 +174,6 @@
};
&dra7_pmx_core {
- mmc1_pins_default: mmc1_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
- DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
- DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
- DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
- DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
- DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
- DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
- >;
- };
-
- mmc2_pins_default: mmc2_pins_default {
- pinctrl-single,pins = <
- DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
- DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
- DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
- DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
- DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
- DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
- DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
- DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
- DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
- DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
- >;
- };
-
dcan1_pins_default: dcan1_pins_default {
pinctrl-single,pins = <
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
--
2.17.0
next prev parent reply other threads:[~2018-04-25 12:55 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-04-25 12:54 [PATCH v3 00/15] dra7: mmc: Update mmc dt node to use sdhci-omap Kishon Vijay Abraham I
2018-04-25 12:54 ` Kishon Vijay Abraham I [this message]
2018-04-25 12:54 ` [PATCH v3 02/15] ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2 Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 03/15] ARM: dts: dra72x-mmc-iodelay: Add a new pinctrl group for clk line without pullup Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 04/15] ARM: dts: dra74x-mmc-iodelay: " Kishon Vijay Abraham I
2018-04-25 13:35 ` Tony Lindgren
2018-04-27 11:19 ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 05/15] ARM: dts: dra76x-mmc-iodelay: " Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 06/15] ARM: dts: am57xx-idk: Use pinctrl group from dra7xx-mmc-iodelay.dtsi to select pulldown Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 07/15] ARM: dts: dra71-evm: Use pinctrl group from dra72x-mmc-iodelay.dtsi " Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 08/15] ARM: dts: am574x-idk: Add pinmux configuration for MMC Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 09/15] ARM: dts: dra72-evm-common: Add wilink8 wlan support Kishon Vijay Abraham I
2018-04-25 14:49 ` Rob Herring
2018-04-25 12:54 ` [PATCH v3 10/15] ARM: dts: dra7-evm: Model EVM_3V6 regulator Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 11/15] ARM: dts: dra7-evm: Add wilink8 wlan support Kishon Vijay Abraham I
2018-04-25 14:47 ` Rob Herring
2018-04-27 11:20 ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 12/15] ARM: dts: dra76-evm: " Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 13/15] ARM: dts: dra7: Use sdhci-omap programming model Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 14/15] ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 15/15] Documentation: ARM: Add new MMC requirements for DRA7/K2G Kishon Vijay Abraham I
2018-04-25 13:32 ` [PATCH v4 " Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180425125449.19755-2-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=corbet@lwn.net \
--cc=devicetree@vger.kernel.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
--subject='Re: [PATCH v3 01/15] ARM: dts: dra72-evm-common: Remove mmc specific pinmux' \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).